mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-04-06 06:29:15 +08:00
34120f7fa5
Jonathan writes:
IIO: New device support, features, late breaking fixes and cleanup for 6.17
The normal mixed bag. A few more fixes than usual as I failed to send
them out earlier.
New device support
==================
adi,ad4080
- New driver for this high speed ADC. Includes extensions to iio-backends
necessary to support filter config, variable data lands and data
alignment control.
adi,ad4170-4
- New driver for this 24-bit very feature rich ADC suited for weigh scale
and thermocouple applications.
adi,ad7405
- New driver for this single channel isolated ADC with backend support
(adi-axi-adc)
google,cros_ec_activity
- Add activity detection to the existing set of cros_ec drivers covering
both human body and significant motion detection.
mediatek,mt6359
- Add support for MT6363 and MT6373 PMIC Auxiliary ADCs.
nicera,d3-323-aa
- New driver for this configurable Passive InfraRed sensor.
Device ID only
==============
mediatek,mt7981-auxadc
- Add ID to mt2701 driver as fully compatible with mt7986-auxadc.
rohm,bu79100g
- Add ID to ad7476 driver as fully compatible with TI ADS7866.
Features
========
Core
- New in_voltageY_convdelay to allow for devices to control timing
offsets between sampling different channels.
adi,ad-sigma-delta-library
- Support SPI offload (later fix for missing Kconfig dependency)
adi,ad4851
- SPI 3-wire support.
adi,ad7606
- Power supply control.
- convdelay and calibbias support for calibration purposes.
- gain calibration support based on external filter resistance provided
from device tree.
adi,ad7768-1
- Add output regulator for VCM output, typically used for preconditioning
circuits.
- Add gpio controller for the 4 GPIOs.
- Multiple scan type support to enable 16-bit modes.
- Support synchronization over SPI.
- Filter type and oversampling ratio control.
- Low pass filter cut off read only attribute.
adi,adxl313
- FIFO support
- DC activity, inactivity detection with power-save on inactivity
- AC coupled activity detection
- Documentation for this complex driver.
- debugfs register access.
adi,adxl345
- Sampling frequency and sensor range controls.
bosch,bmi270
- Add step counter support.
invensense,icm42600
- Wake on motion support.
Cleanup and fixes
=================
backend
- Drop unused parameter from iio_backend_ovesampling_ratio_set()
docs
- Fix ABI docs around I and Q modifiers.
treewide
- Switch remaining drives to use maple tree regcache.
- Drop use of DRIVER_NAME style definitions when only used in one
place.
- Drop unused export.h includes.
- Use = { } in place of memset in various drivers.
- Constify various info structures and related.
- Switch some drivers from array of chip_info structures to individual
named structures.
adi,ad-sigma_delta library
- Fix over allocation of scan buffer. (bits/bytes confusion)
- Sort includes and apply iwyu principles to ensure sensible set.
- Use u8 instead of uint8_t
- Replace hard coded type sizes with sizeof() and BITS_TO_BYTES() as
appropriate.
- Factor out setting of read address to reduce duplication.
- Switch to buffer predisable so error handling on buffer enable
functions correctly (balanced against postenable).
adi,ad4000
- Don't use sift_right() on an unsigned value.
adi,ad7173
- Add missing check on spi_setup() succeeding.
- Simplify clock enable disable code using devm_clk_get_enabled()
- Fix channel index for syscalib_mode
- Fix number of configuration slots for some devics.
- Fix the channel used for calibration.
- Fix setting ODR up in probe.
adi,ad7380
- Drop unused oversampling_ratio getter function call as value never
used.
adi,ad7606
- Exit if invalid dt_schema encountered rather than carrying on with
unknown config.
adi,ad7768-1
- Ensure SYNC_IN pulse is long enough.
- Switch sampling_frequency_available to read_avail() callback.
adi,ada4250
- Ensuring a dma-safe buffer for regmap_bulk_read()
- Use a local dev variable to simplify code
- Relax chip ID matching to allow for fallback dt compatibles.
- Make use of devm_regulator_get_enabled_read_voltage() to replace
equivalent code.
- Shuffle elements around in struct to improve logical groupings and
reduce holes.
- Use dev_err_probe()
adi,adxl313
- Use regcache to reduce traffic.
- Factor out enabling of measurement.
adi,adxl345
- Drop irq from struct as only used locally in code
- Simplify measure enable function using regmap_update_bits()
- Replace some magic numbers by units.h defines
- Simplify interrupt mapping code
- Simplify FIFO read out.
adi,axi-dac
- Factor out code to check for bus free to reduce duplication.
avago,apds9306
- Use a helper to get register address in both get and set functions.
bosch,bmi160+bmi270
- Ensure triggers suspended and resumed correctly.
bosch,bmo055
- Fix theoretical OOB acces to hw_xlate array.
freescale,vf610
- Drop -ENOMEM error message as plenty of existing prints if memory
allocation fails.
- Use dev_err_probe() and devm_clk_geT_enabled() to simplify probe().
kionix,kx022a
- Apply include what you use principles to includes.
invensense,itg3200
- Add missing dt-binding for this gyroscope.
invensense,icm42600
- Switch from int64_t and similar to s64 and other kernel types.
- Simplify arrangement of DMA safe buffers and potentially reduce
structure size a little.
invensense,mpu6050
- Reduce duplication in aux read/write code.
- Use sysfs_emit() to replace scnprintf()
murata,irsd200
- Drop duplicate printing of ret in dev_err_probe()
nxp,lpc3220-adc
- Add missing clocks property to dt-binding.
st,spear600
- Convert dt-binding that got left behind in staging to yaml in the main
tree.
st,stm32-adc
- Use dev_fwnode() rather than directly accessing the of_node.
vti,sca3000
- Use direct returns instead of gotos where simple.
Various other minor typo and white space fixes.
* tag 'iio-for-6.17a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (201 commits)
iio: adc: ad_sigma_delta: Select IIO_BUFFER_DMAENGINE and SPI_OFFLOAD
iio: adc: ad7173: fix setting ODR in probe
iio: adc: ad7173: fix calibration channel
iio: adc: ad7173: fix num_slots
iio: adc: ad7173: fix channels index for syscalib_mode
iio: adc: ad_sigma_delta: change to buffer predisable
iio: ABI: fix correctness of I and Q modifiers
iio: Add driver for Nicera D3-323-AA PIR sensor
dt-bindings: iio: proximity: Add Nicera D3-323-AA PIR sensor
dt-bindings: vendor-prefixes: Add Nicera
iio: dac: vf610: Simplify with devm_clk_get_enabled()
iio: adc: vf610: Simplify with dev_err_probe
iio: adc: vf610: Drop -ENOMEM error message
iio: imu: bno055: make bno055_sysfs_attr const
iio: imu: bno055: fix OOB access of hw_xlate array
dt-bindings: iio: adc: Add support for MT7981
iio: accel: kionix-kx022a: Apply approximate iwyu principles to includes
iio: adc: ad4170-4: Add support for weigh scale, thermocouple, and RTD sens
iio: adc: ad4170-4: Add support for internal temperature sensor
iio: adc: ad4170-4: Add GPIO controller support
...
Linux kernel
============
There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.
In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory,
several of them using the reStructuredText markup notation.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.