The responsiveness of the Per Entity Load Tracking (PELT) util_avg in
mobile devices is still considered too low for utilization changes
during task ramp-up.
In Android this manifests in the fact that the first frames of a UI
activity are very prone to be jankframes (a frame which doesn't meet
the required frame rendering time, e.g. 16ms@60Hz) since the CPU
frequency is normally low at this point and has to ramp up quickly.
The beginning of an UI activity is also characterized by the occurrence
of CPU contention, especially on little CPUs. Current little CPUs can
have an original CPU capacity of only ~ 150 which means that the actual
CPU capacity at lower frequency can even be much smaller.
Schedutil maps CPU util_avg into CPU frequency request via:
util = effective_cpu_util(..., cpu_util_cfs(cpu), ...) ->
util = map_util_perf(util) -> freq = map_util_freq(util, ...)
CPU contention for CFS tasks can be detected by 'CPU runnable > CPU
utililization' in cpu_util_cfs_boost() -> cpu_util(..., boost = 1).
Schedutil uses 'runnable boosting' by calling cpu_util_cfs_boost().
To be in sync with schedutil's CPU frequency selection, Energy Aware
Scheduling (EAS) also calls cpu_util(..., boost = 1) during max util
detection.
Moreover, 'runnable boosting' is also used in load-balance for busiest
CPU selection when the migration type is 'migrate_util', i.e. only at
sched domains which don't have the SD_SHARE_PKG_RESOURCES flag set.
Suggested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230515115735.296329-3-dietmar.eggemann@arm.com
There is a lot of code duplication in cpu_util_next() & cpu_util_cfs().
Remove this by allowing cpu_util_next() to be called with p = NULL.
Rename cpu_util_next() to cpu_util() since the '_next' suffix is no
longer necessary to distinct cpu utilization related functions.
Implement cpu_util_cfs(cpu) as cpu_util(cpu, p = NULL, -1).
This will allow to code future related cpu util changes only in one
place, namely in cpu_util().
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230515115735.296329-2-dietmar.eggemann@arm.com
We've run into the case that the balancer tries to balance a migration
disabled task and trigger the warning in set_task_cpu() like below:
------------[ cut here ]------------
WARNING: CPU: 7 PID: 0 at kernel/sched/core.c:3115 set_task_cpu+0x188/0x240
Modules linked in: hclgevf xt_CHECKSUM ipt_REJECT nf_reject_ipv4 <...snip>
CPU: 7 PID: 0 Comm: swapper/7 Kdump: loaded Tainted: G O 6.1.0-rc4+ #1
Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V5.B221.01 12/09/2021
pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : set_task_cpu+0x188/0x240
lr : load_balance+0x5d0/0xc60
sp : ffff80000803bc70
x29: ffff80000803bc70 x28: ffff004089e190e8 x27: ffff004089e19040
x26: ffff007effcabc38 x25: 0000000000000000 x24: 0000000000000001
x23: ffff80000803be84 x22: 000000000000000c x21: ffffb093e79e2a78
x20: 000000000000000c x19: ffff004089e19040 x18: 0000000000000000
x17: 0000000000001fad x16: 0000000000000030 x15: 0000000000000000
x14: 0000000000000003 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000001 x10: 0000000000000400 x9 : ffffb093e4cee530
x8 : 00000000fffffffe x7 : 0000000000ce168a x6 : 000000000000013e
x5 : 00000000ffffffe1 x4 : 0000000000000001 x3 : 0000000000000b2a
x2 : 0000000000000b2a x1 : ffffb093e6d6c510 x0 : 0000000000000001
Call trace:
set_task_cpu+0x188/0x240
load_balance+0x5d0/0xc60
rebalance_domains+0x26c/0x380
_nohz_idle_balance.isra.0+0x1e0/0x370
run_rebalance_domains+0x6c/0x80
__do_softirq+0x128/0x3d8
____do_softirq+0x18/0x24
call_on_irq_stack+0x2c/0x38
do_softirq_own_stack+0x24/0x3c
__irq_exit_rcu+0xcc/0xf4
irq_exit_rcu+0x18/0x24
el1_interrupt+0x4c/0xe4
el1h_64_irq_handler+0x18/0x2c
el1h_64_irq+0x74/0x78
arch_cpu_idle+0x18/0x4c
default_idle_call+0x58/0x194
do_idle+0x244/0x2b0
cpu_startup_entry+0x30/0x3c
secondary_start_kernel+0x14c/0x190
__secondary_switched+0xb0/0xb4
---[ end trace 0000000000000000 ]---
Further investigation shows that the warning is superfluous, the migration
disabled task is just going to be migrated to its current running CPU.
This is because that on load balance if the dst_cpu is not allowed by the
task, we'll re-select a new_dst_cpu as a candidate. If no task can be
balanced to dst_cpu we'll try to balance the task to the new_dst_cpu
instead. In this case when the migration disabled task is not on CPU it
only allows to run on its current CPU, load balance will select its
current CPU as new_dst_cpu and later triggers the warning above.
The new_dst_cpu is chosen from the env->dst_grpmask. Currently it
contains CPUs in sched_group_span() and if we have overlapped groups it's
possible to run into this case. This patch makes env->dst_grpmask of
group_balance_mask() which exclude any CPUs from the busiest group and
solve the issue. For balancing in a domain with no overlapped groups
the behaviour keeps same as before.
Suggested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230530082507.10444-1-yangyicong@huawei.com
These four functions have a normal definition for CONFIG_FAIR_GROUP_SCHED,
and empty one that is only referenced when FAIR_GROUP_SCHED is disabled
but CGROUP_SCHED is still enabled. If both are turned off, the functions
are still defined but the misisng prototype causes a W=1 warning:
kernel/sched/fair.c:12544:6: error: no previous prototype for 'free_fair_sched_group'
kernel/sched/fair.c:12546:5: error: no previous prototype for 'alloc_fair_sched_group'
kernel/sched/fair.c:12553:6: error: no previous prototype for 'online_fair_sched_group'
kernel/sched/fair.c:12555:6: error: no previous prototype for 'unregister_fair_sched_group'
Move the alternatives into the header as static inline functions with
the correct combination of #ifdef checks to avoid the warning without
adding even more complexity.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230522195021.3456768-6-arnd@kernel.org
init_cfs_bandwidth() is only used when CONFIG_FAIR_GROUP_SCHED is
enabled, and without this causes a W=1 warning for the missing prototype:
kernel/sched/fair.c:6131:6: error: no previous prototype for 'init_cfs_bandwidth'
The normal implementation is only defined for CONFIG_CFS_BANDWIDTH,
so the stub exists when CFS_BANDWIDTH is disabled but FAIR_GROUP_SCHED
is enabled.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230522195021.3456768-4-arnd@kernel.org
This function is only used when CONFIG_SMP is enabled, without that there
is no caller and no prototype:
kernel/sched/fair.c:688:5: error: no previous prototype for 'sched_update_scaling' [-Werror=missing-prototypes
Hide the definition in the same #ifdef check as the declaration.
Fixes: 8a99b6833c ("sched: Move SCHED_DEBUG sysctl to debugfs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230522195021.3456768-2-arnd@kernel.org
Now that find_busiest_group() triggers load balancing between a fully_
busy SMT2 core and an idle non-SMT core, it is no longer needed to force
balancing via asym_packing. Use asym_packing only as intended: when there
is high-priority CPU that is idle.
After this change, the same logic apply to SMT and non-SMT local groups.
It makes less sense having a separate function to deal specifically with
SMT. Fold the logic in asym_smt_can_pull_tasks() into sched_asym().
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20230406203148.19182-8-ricardo.neri-calderon@linux.intel.com
The prefer_sibling setting acts on the busiest group to move excess tasks
to the local group. This should be done as per request of the child of the
busiest group's sched domain, not the local group's.
Using the flags of the child domain of the local group works fortuitously
if both groups have child domains.
There are cases, however, in which the busiest group's sched domain has
child but the local group's does not. Consider, for instance a non-SMT
core (or an SMT core with only one online sibling) doing load balance with
an SMT core at the MC level. SD_PREFER_SIBLING of the busiest group's child
domain will not be honored. We are left with a fully busy SMT core and an
idle non-SMT core.
Suggested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20230406203148.19182-7-ricardo.neri-calderon@linux.intel.com
When comparing two fully_busy scheduling groups, keep the current busiest
group if it represents an SMT core. Tasks in such scheduling group share
CPU resources and need more help than tasks in a non-SMT fully_busy group.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20230406203148.19182-6-ricardo.neri-calderon@linux.intel.com
Using asym_packing priorities within an SMT core is straightforward. Just
follow the priorities that hardware indicates.
When balancing load from an SMT core, also consider the idle state of its
siblings. Priorities do not reflect that an SMT core divides its throughput
among all its busy siblings. They only makes sense when exactly one sibling
is busy.
Indicate that active balance is needed if the destination CPU has lower
priority than the source CPU but the latter has busy SMT siblings.
Make find_busiest_queue() not skip higher-priority SMT cores with more than
busy sibling.
Suggested-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20230406203148.19182-5-ricardo.neri-calderon@linux.intel.com
Callers of asym_smt_can_pull_tasks() check the idle state of the
destination CPU and its SMT siblings, if any. No extra checks are needed
in such function.
Since SMT cores divide capacity among its siblings, priorities only really
make sense if only one sibling is active. This is true for SMT2, SMT4,
SMT8, etc. Do not use asym_packing load balance for this case. Instead,
let find_busiest_group() handle imbalances.
When balancing non-SMT cores or at higher scheduling domains (e.g.,
between MC scheduling groups), continue using priorities.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Len Brown <len.brown@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20230406203148.19182-4-ricardo.neri-calderon@linux.intel.com
When balancing load between cores, all the SMT siblings of the destination
CPU, if any, must be idle. Otherwise, pulling new tasks degrades the
throughput of the busy SMT siblings. The overall throughput of the system
remains the same.
When balancing load within an SMT core this consideration is not relevant.
Follow the priorities that hardware indicates.
Suggested-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20230406203148.19182-3-ricardo.neri-calderon@linux.intel.com
asym_packing needs this function to determine whether an SMT core is a
suitable destination for load balancing.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20230406203148.19182-2-ricardo.neri-calderon@linux.intel.com
- Allow unprivileged PSI poll()ing
- Fix performance regression introduced by mm_cid
- Improve livepatch stalls by adding livepatch task switching to cond_resched(),
this resolves livepatching busy-loop stalls with certain CPU-bound kthreads.
- Improve sched_move_task() performance on autogroup configs.
- On core-scheduling CPUs, avoid selecting throttled tasks to run
- Misc cleanups, fixes and improvements.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Hgci
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Allow unprivileged PSI poll()ing
- Fix performance regression introduced by mm_cid
- Improve livepatch stalls by adding livepatch task switching to
cond_resched(). This resolves livepatching busy-loop stalls with
certain CPU-bound kthreads
- Improve sched_move_task() performance on autogroup configs
- On core-scheduling CPUs, avoid selecting throttled tasks to run
- Misc cleanups, fixes and improvements
* tag 'sched-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/clock: Fix local_clock() before sched_clock_init()
sched/rt: Fix bad task migration for rt tasks
sched: Fix performance regression introduced by mm_cid
sched/core: Make sched_dynamic_mutex static
sched/psi: Allow unprivileged polling of N*2s period
sched/psi: Extract update_triggers side effect
sched/psi: Rename existing poll members in preparation
sched/psi: Rearrange polling code in preparation
sched/fair: Fix inaccurate tally of ttwu_move_affine
vhost: Fix livepatch timeouts in vhost_worker()
livepatch,sched: Add livepatch task switching to cond_resched()
livepatch: Skip task_call_func() for current task
livepatch: Convert stack entries array to percpu
sched: Interleave cfs bandwidth timers for improved single thread performance at low utilization
sched/core: Reduce cost of sched_move_task when config autogroup
sched/core: Avoid selecting the task that is throttled to run when core-sched enable
sched/topology: Make sched_energy_mutex,update static
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page().
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather
than exclusive, and has fixed a bunch of errors which were caused by its
unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr3zQAKCRDdBJ7gKXxA
jlLoAP0fpQBipwFxED0Us4SKQfupV6z4caXNJGPeay7Aj11/kQD/aMRC2uPfgr96
eMG3kwn2pqkB9ST2QpkaRbxA//eMbQY=
=J+Dj
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
When local group is fully busy but its average load is above system load,
computing the imbalance will overflow and local group is not the best
target for pulling this load.
Fixes: 0b0695f2b3 ("sched/fair: Rework load_balance()")
Reported-by: Tingjia Cao <tjcao980311@gmail.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Tingjia Cao <tjcao980311@gmail.com>
Link: https://lore.kernel.org/lkml/CABcWv9_DAhVBOq2=W=2ypKE9dKM5s2DvoV8-U0+GDwwuKZ89jQ@mail.gmail.com/T/
before: last 6 bits of PID is used as index to store information about
tasks accessing VMA's.
after: hash_32 is used to take of cases where tasks are created over a
period of time, and thus improve collision probability.
Result:
The patch series overall improves autonuma cost.
Kernbench around more than 5% improvement and system time in mmtest
autonuma showed more than 80% improvement
Link: https://lkml.kernel.org/r/d5a9f75513300caed74e5c8570bba9317b963c2b.1677672277.git.raghavendra.kt@amd.com
Signed-off-by: Raghavendra K T <raghavendra.kt@amd.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Cc: Bharata B Rao <bharata@amd.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Disha Talreja <dishaa.talreja@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This helps to ensure that only recently accessed PIDs scan the VMAs.
Current implementation: (idea supported by PeterZ)
1. Accessing PID information is maintained in two windows.
access_pids[1] being newest.
2. Reset old access PID info i.e. access_pid[0] every (4 *
sysctl_numa_balancing_scan_delay) interval after initial scan delay
period expires.
The above interval seemed to be experimentally optimum since it avoids
frequent reset of access info as well as helps clearing the old access
info regularly. The reset logic is implemented in scan path.
Link: https://lkml.kernel.org/r/f7a675f66d1442d048b4216b2baf94515012c405.1677672277.git.raghavendra.kt@amd.com
Signed-off-by: Raghavendra K T <raghavendra.kt@amd.com>
Suggested-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Bharata B Rao <bharata@amd.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Disha Talreja <dishaa.talreja@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During Numa scanning make sure only relevant vmas of the tasks are
scanned.
Before:
All the tasks of a process participate in scanning the vma even if they
do not access vma in it's lifespan.
Now:
Except cases of first few unconditional scans, if a process do
not touch vma (exluding false positive cases of PID collisions)
tasks no longer scan all vma
Logic used:
1) 6 bits of PID used to mark active bit in vma numab status during
fault to remember PIDs accessing vma. (Thanks Mel)
2) Subsequently in scan path, vma scanning is skipped if current PID
had not accessed vma.
3) First two times we do allow unconditional scan to preserve earlier
behaviour of scanning.
Acknowledgement to Bharata B Rao <bharata@amd.com> for initial patch to
store pid information and Peter Zijlstra <peterz@infradead.org> (Usage of
test and set bit)
Link: https://lkml.kernel.org/r/092f03105c7c1d3450f4636b1ea350407f07640e.1677672277.git.raghavendra.kt@amd.com
Signed-off-by: Raghavendra K T <raghavendra.kt@amd.com>
Suggested-by: Mel Gorman <mgorman@techsingularity.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Disha Talreja <dishaa.talreja@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pach series "sched/numa: Enhance vma scanning", v3.
The patchset proposes one of the enhancements to numa vma scanning
suggested by Mel. This is continuation of [3].
Reposting the rebased patchset to akpm mm-unstable tree (March 1)
Existing mechanism of scan period involves, scan period derived from
per-thread stats. Process Adaptive autoNUMA [1] proposed to gather NUMA
fault stats at per-process level to capture aplication behaviour better.
During that course of discussion, Mel proposed several ideas to enhance
current numa balancing. One of the suggestion was below
Track what threads access a VMA. The suggestion was to use an unsigned
long pid_mask and use the lower bits to tag approximately what threads
access a VMA. Skip VMAs that did not trap a fault. This would be
approximate because of PID collisions but would reduce scanning of areas
the thread is not interested in. The above suggestion intends not to
penalize threads that has no interest in the vma, thus reduce scanning
overhead.
V3 changes are mostly based on PeterZ comments (details below in changes)
Summary of patchset:
Current patchset implements:
1. Delay the vma scanning logic for newly created VMA's so that
additional overhead of scanning is not incurred for short lived tasks
(implementation by Mel)
2. Store the information of tasks accessing VMA in 2 windows. It is
regularly cleared in (4*sysctl_numa_balancing_scan_delay) interval.
The above time is derived from experimenting (Suggested by PeterZ) to
balance between frequent clearing vs obsolete access data
3. hash_32 used to encode task index accessing VMA information
4. VMA's acess information is used to skip scanning for the tasks
which had not accessed VMA
Changes since V2:
patch1:
- Renaming of structure, macro to function,
- Add explanation to heuristics
- Adding more details from result (PeterZ)
Patch2:
- Usage of test and set bit (PeterZ)
- Move storing access PID info to numa_migrate_prep()
- Add a note on fainess among tasks allowed to scan
(PeterZ)
Patch3:
- Maintain two windows of access PID information
(PeterZ supported implementation and Gave idea to extend
to N if needed)
Patch4:
- Apply hash_32 function to track VMA accessing PIDs (PeterZ)
Changes since RFC V1:
- Include Mel's vma scan delay patch
- Change the accessing pid store logic (Thanks Mel)
- Fencing structure / code to NUMA_BALANCING (David, Mel)
- Adding clearing access PID logic (Mel)
- Descriptive change log ( Mike Rapoport)
Things to ponder over:
==========================================
- Improvement to clearing accessing PIDs logic (discussed in-detail in
patch3 itself (Done in this patchset by implementing 2 window history)
- Current scan period is not changed in the patchset, so we do see
frequent tries to scan. Relaxing scan period dynamically could improve
results further.
[1] sched/numa: Process Adaptive autoNUMA
Link: https://lore.kernel.org/lkml/20220128052851.17162-1-bharata@amd.com/T/
[2] RFC V1 Link:
https://lore.kernel.org/all/cover.1673610485.git.raghavendra.kt@amd.com/
[3] V2 Link:
https://lore.kernel.org/lkml/cover.1675159422.git.raghavendra.kt@amd.com/
Results:
Summary: Huge autonuma cost reduction seen in mmtest. Kernbench improvement
is more than 5% and huge system time (80%+) improvement from mmtest autonuma.
(dbench had huge std deviation to post)
kernbench
===========
6.2.0-mmunstable-base 6.2.0-mmunstable-patched
Amean user-256 22002.51 ( 0.00%) 22649.95 * -2.94%*
Amean syst-256 10162.78 ( 0.00%) 8214.13 * 19.17%*
Amean elsp-256 160.74 ( 0.00%) 156.92 * 2.38%*
Duration User 66017.43 67959.84
Duration System 30503.15 24657.03
Duration Elapsed 504.61 493.12
6.2.0-mmunstable-base 6.2.0-mmunstable-patched
Ops NUMA alloc hit 1738835089.00 1738780310.00
Ops NUMA alloc local 1738834448.00 1738779711.00
Ops NUMA base-page range updates 477310.00 392566.00
Ops NUMA PTE updates 477310.00 392566.00
Ops NUMA hint faults 96817.00 87555.00
Ops NUMA hint local faults % 10150.00 2192.00
Ops NUMA hint local percent 10.48 2.50
Ops NUMA pages migrated 86660.00 85363.00
Ops AutoNUMA cost 489.07 442.14
autonumabench
===============
6.2.0-mmunstable-base 6.2.0-mmunstable-patched
Amean syst-NUMA01 399.50 ( 0.00%) 52.05 * 86.97%*
Amean syst-NUMA01_THREADLOCAL 0.21 ( 0.00%) 0.22 * -5.41%*
Amean syst-NUMA02 0.80 ( 0.00%) 0.78 * 2.68%*
Amean syst-NUMA02_SMT 0.65 ( 0.00%) 0.68 * -3.95%*
Amean elsp-NUMA01 313.26 ( 0.00%) 313.11 * 0.05%*
Amean elsp-NUMA01_THREADLOCAL 1.06 ( 0.00%) 1.08 * -1.76%*
Amean elsp-NUMA02 3.19 ( 0.00%) 3.24 * -1.52%*
Amean elsp-NUMA02_SMT 3.72 ( 0.00%) 3.61 * 2.92%*
Duration User 396433.47 324835.96
Duration System 2808.70 376.66
Duration Elapsed 2258.61 2258.12
6.2.0-mmunstable-base 6.2.0-mmunstable-patched
Ops NUMA alloc hit 59921806.00 49623489.00
Ops NUMA alloc miss 0.00 0.00
Ops NUMA interleave hit 0.00 0.00
Ops NUMA alloc local 59920880.00 49622594.00
Ops NUMA base-page range updates 152259275.00 50075.00
Ops NUMA PTE updates 152259275.00 50075.00
Ops NUMA PMD updates 0.00 0.00
Ops NUMA hint faults 154660352.00 39014.00
Ops NUMA hint local faults % 138550501.00 23139.00
Ops NUMA hint local percent 89.58 59.31
Ops NUMA pages migrated 8179067.00 14147.00
Ops AutoNUMA cost 774522.98 195.69
This patch (of 4):
Currently whenever a new task is created we wait for
sysctl_numa_balancing_scan_delay to avoid unnessary scanning overhead.
Extend the same logic to new or very short-lived VMAs.
[raghavendra.kt@amd.com: add initialization in vm_area_dup())]
Link: https://lkml.kernel.org/r/cover.1677672277.git.raghavendra.kt@amd.com
Link: https://lkml.kernel.org/r/7a6fbba87c8b51e67efd3e74285bb4cb311a16ca.1677672277.git.raghavendra.kt@amd.com
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Bharata B Rao <bharata@amd.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Disha Talreja <dishaa.talreja@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are scenarios where non-affine wakeups are incorrectly counted as
affine wakeups by schedstats.
When wake_affine_idle() returns prev_cpu which doesn't equal to
nr_cpumask_bits, it will slip through the check: target == nr_cpumask_bits
in wake_affine() and be counted as if target == this_cpu in schedstats.
Replace target == nr_cpumask_bits with target != this_cpu to make sure
affine wakeups are accurately tallied.
Fixes: 806486c377 (sched/fair: Do not migrate if the prev_cpu is idle)
Suggested-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Libo Chen <libo.chen@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20220810223313.386614-1-libo.chen@oracle.com
CPU cfs bandwidth controller uses hrtimer. Currently there is no initial
value set. Hence all period timers would align at expiry.
This happens when there are multiple CPU cgroup's.
There is a performance gain that can be achieved here if the timers are
interleaved when the utilization of each CPU cgroup is low and total
utilization of all the CPU cgroup's is less than 50%. If the timers are
interleaved, then the unthrottled cgroup can run freely without many
context switches and can also benefit from SMT Folding. This effect will
be further amplified in SPLPAR environment.
This commit adds a random offset after initializing each hrtimer. This
would result in interleaving the timers at expiry, which helps in achieving
the said performance gain.
This was tested on powerpc platform with 8 core SMT=8. Socket power was
measured when the workload. Benchmarked the stress-ng with power
information. Throughput oriented benchmarks show significant gain up to
25% while power consumption increases up to 15%.
Workload: stress-ng --cpu=32 --cpu-ops=50000.
1CG - 1 cgroup is running.
2CG - 2 cgroups are running together.
Time taken to complete stress-ng in seconds and power is in watts.
each cgroup is throttled at 25% with 100ms as the period value.
6.2-rc6 | with patch
8 core 1CG power 2CG power | 1CG power 2 CG power
27.5 80.6 40 90 | 27.3 82 32.3 104
27.5 81 40.2 91 | 27.5 81 38.7 96
27.7 80 40.1 89 | 27.6 80 29.7 106
27.7 80.1 40.3 94 | 27.6 80 31.5 105
Latency might be affected by this change. That could happen if the CPU was
in a deep idle state which is possible if we interleave the timers. Used
schbench for measuring the latency. Each cgroup is throttled at 25% with
period value is set to 100ms. Numbers are when both the cgroups are
running simultaneously. Latency values don't degrade much. Some
improvement is seen in tail latencies.
6.2-rc6 with patch
Groups: 16
50.0th: 39.5 42.5
75.0th: 924.0 922.0
90.0th: 972.0 968.0
95.0th: 1005.5 994.0
99.0th: 4166.0 2287.0
99.5th: 7314.0 7448.0
99.9th: 15024.0 13600.0
Groups: 32
50.0th: 819.0 463.0
75.0th: 1596.0 918.0
90.0th: 5992.0 1281.5
95.0th: 13184.0 2765.0
99.0th: 21792.0 14240.0
99.5th: 25696.0 18920.0
99.9th: 33280.0 35776.0
Groups: 64
50.0th: 4806.0 3440.0
75.0th: 31136.0 33664.0
90.0th: 54144.0 58752.0
95.0th: 66176.0 67200.0
99.0th: 84736.0 91520.0
99.5th: 97408.0 114048.0
99.9th: 136448.0 140032.0
Initial RFC PATCH, discussions and details on the problem:
Link1: https://lore.kernel.org/lkml/5ae3cb09-8c9a-11e8-75a7-cc774d9bc283@linux.vnet.ibm.com/
Link2: https://lore.kernel.org/lkml/9c57c92c-3e0c-b8c5-4be9-8f4df344a347@linux.vnet.ibm.com/
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Shrikanth Hegde<sshegde@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230223185153.1499710-1-sshegde@linux.vnet.ibm.com
When {rt, cfs}_rq or dl task is throttled, since cookied tasks
are not dequeued from the core tree, So sched_core_find() and
sched_core_next() may return throttled task, which may
cause throttled task to run on the CPU.
So we add checks in sched_core_find() and sched_core_next()
to make sure that the return is a runnable task that is
not throttled.
Co-developed-by: Cruz Zhao <CruzZhao@linux.alibaba.com>
Signed-off-by: Cruz Zhao <CruzZhao@linux.alibaba.com>
Signed-off-by: Hao Jia <jiahao.os@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230316081806.69544-1-jiahao.os@bytedance.com
Commit 829c1651e9 ("sched/fair: sanitize vruntime of entity being placed")
fixes an overflowing bug, but ignore a case that se->exec_start is reset
after a migration.
For fixing this case, we delay the reset of se->exec_start after
placing the entity which se->exec_start to detect long sleeping task.
In order to take into account a possible divergence between the clock_task
of 2 rqs, we increase the threshold to around 104 days.
Fixes: 829c1651e9 ("sched/fair: sanitize vruntime of entity being placed")
Originally-by: Zhang Qiao <zhangqiao22@huawei.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Qiao <zhangqiao22@huawei.com>
Link: https://lore.kernel.org/r/20230317160810.107988-1-vincent.guittot@linaro.org
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()") which
does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter". These filters provide users
with finer-grained control over DAMOS's actions. SeongJae has also done
some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series "mm:
support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap
PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with his
series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings. The previous BPF-based approach had
shortcomings. See "mm: In-kernel support for memory-deny-write-execute
(MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a per-node
basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage during
compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in ths
series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's series
"mm, arch: add generic implementation of pfn_valid() for FLATMEM" and
"fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest of
the kernel in the series "Simplify the external interface for GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the series
"mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/PoPQAKCRDdBJ7gKXxA
jlvpAPsFECUBBl20qSue2zCYWnHC7Yk4q9ytTkPB/MMDrFEN9wD/SNKEm2UoK6/K
DmxHkn0LAitGgJRS/W9w81yrgig9tAQ=
=MlGs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
When a scheduling entity is placed onto cfs_rq, its vruntime is pulled
to the base level (around cfs_rq->min_vruntime), so that the entity
doesn't gain extra boost when placed backwards.
However, if the entity being placed wasn't executed for a long time, its
vruntime may get too far behind (e.g. while cfs_rq was executing a
low-weight hog), which can inverse the vruntime comparison due to s64
overflow. This results in the entity being placed with its original
vruntime way forwards, so that it will effectively never get to the cpu.
To prevent that, ignore the vruntime of the entity being placed if it
didn't execute for much longer than the characteristic sheduler time
scale.
[rkagan: formatted, adjusted commit log, comments, cutoff value]
Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com>
Co-developed-by: Roman Kagan <rkagan@amazon.de>
Signed-off-by: Roman Kagan <rkagan@amazon.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230130122216.3555094-1-rkagan@amazon.de
Remove the capacity inversion detection which is now handled by
util_fits_cpu() returning -1 when we need to continue to look for a
potential CPU with better performance.
This ends up almost reverting patches below except for some comments:
commit da07d2f9c1 ("sched/fair: Fixes for capacity inversion detection")
commit aa69c36f31 ("sched/fair: Consider capacity inversion in util_fits_cpu()")
commit 44c7b80bff ("sched/fair: Detect capacity inversion")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230201143628.270912-3-vincent.guittot@linaro.org
By taking into account uclamp_min, the 1:1 relation between task misfit
and cpu overutilized is no more true as a task with a small util_avg may
not fit a high capacity cpu because of uclamp_min constraint.
Add a new state in util_fits_cpu() to reflect the case that task would fit
a CPU except for the uclamp_min hint which is a performance requirement.
Use -1 to reflect that a CPU doesn't fit only because of uclamp_min so we
can use this new value to take additional action to select the best CPU
that doesn't match uclamp_min hint.
When util_fits_cpu() returns -1, we will continue to look for a possible
CPU with better performance, which replaces Capacity Inversion detection
with capacity_orig_of() - thermal_load_avg to detect a capacity inversion.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-and-tested-by: Qais Yousef <qyousef@layalina.io>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Kajetan Puchalski <kajetan.puchalski@arm.com>
Link: https://lore.kernel.org/r/20230201143628.270912-2-vincent.guittot@linaro.org
Use the vma iterator so that the iterator can be invalidated or updated to
avoid each caller doing so.
Link: https://lkml.kernel.org/r/20230120162650.984577-23-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmPW7E8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGf7MIAI0JnHN9WvtEukSZ
E6j6+cEGWxsvD6q0g3GPolaKOCw7hlv0pWcFJFcUAt0jebspMdxV2oUGJ8RYW7Lg
nCcHvEVswGKLAQtQSWw52qotW6fUfMPsNYYB5l31sm1sKH4Cgss0W7l2HxO/1LvG
TSeNHX53vNAZ8pVnFYEWCSXC9bzrmU/VALF2EV00cdICmfvjlgkELGXoLKJJWzUp
s63fBHYGGURSgwIWOKStoO6HNo0j/F/wcSMx8leY8qDUtVKHj4v24EvSgxUSDBER
ch3LiSQ6qf4sw/z7pqruKFthKOrlNmcc0phjiES0xwwGiNhLv0z3rAhc4OM2cgYh
SDc/Y/c=
=zpaD
-----END PGP SIGNATURE-----
Merge tag 'v6.2-rc6' into sched/core, to pick up fixes
Pick up fixes before merging another batch of cpuidle updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In presence of a lot of small weight tasks like sched_idle tasks, normal
or high weight tasks can see their ideal runtime (sched_slice) to increase
to hundreds ms whereas it normally stays below sysctl_sched_latency.
2 normal tasks running on a CPU will have a max sched_slice of 12ms
(half of the sched_period). This means that they will make progress
every sysctl_sched_latency period.
If we now add 1000 idle tasks on the CPU, the sched_period becomes
3006 ms and the ideal runtime of the normal tasks becomes 609 ms.
It will even become 1500ms if the idle tasks belongs to an idle cgroup.
This means that the scheduler will look for picking another waiting task
after 609ms running time (1500ms respectively). The idle tasks change
significantly the way the 2 normal tasks interleave their running time
slot whereas they should have a small impact.
Such long sched_slice can delay significantly the release of resources
as the tasks can wait hundreds of ms before the next running slot just
because of idle tasks queued on the rq.
Cap the ideal_runtime to sysctl_sched_latency to make sure that tasks will
regularly make progress and will not be significantly impacted by
idle/background tasks queued on the rq.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20230113133613.257342-1-vincent.guittot@linaro.org
Traversing the Perf Domains requires rcu_read_lock() to be held and is
conditional on sched_energy_enabled(). Ensure right protections applied.
Also skip capacity inversion detection for our own pd; which was an
error.
Fixes: 44c7b80bff ("sched/fair: Detect capacity inversion")
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230112122708.330667-3-qyousef@layalina.io
When select_idle_capacity() starts scanning for an idle CPU, it starts
with target CPU that has already been checked in select_idle_sibling().
So we start checking from the next CPU and try the target CPU at the end.
Similarly for task_numa_assign(), we have just checked numa_migrate_on
of dst_cpu, so start from the next CPU. This also works for
steal_cookie_task(), the first scan must fail and start directly
from the next one.
Signed-off-by: Hao Jia <jiahao.os@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/20221216062406.7812-3-jiahao.os@bytedance.com
In update_numa_stats() we try to find an idle cpu on the NUMA node,
preferably an idle core. we can stop looking for the next idle core
or idle cpu after finding an idle core. But we can't stop the
whole loop of scanning the CPU, because we need to calculate
approximate NUMA stats at a point in time. For example,
the src and dst nr_running is needed by task_numa_find_cpu().
Signed-off-by: Hao Jia <jiahao.os@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/20221216062406.7812-2-jiahao.os@bytedance.com
With a modified container_of() that preserves constness, the compiler
finds some pointers which should have been marked as const. task_of()
also needs to become const-preserving for the !FAIR_GROUP_SCHED case so
that cfs_rq_of() can take a const argument. No change to generated code.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221212144946.2657785-1-willy@infradead.org
CFS bandwidth currently distributes new runtime and unthrottles cfs_rq's
inline in an hrtimer callback. Runtime distribution is a per-cpu
operation, and unthrottling is a per-cgroup operation, since a tg walk
is required. On machines with a large number of cpus and large cgroup
hierarchies, this cpus*cgroups work can be too much to do in a single
hrtimer callback: since IRQ are disabled, hard lockups may easily occur.
Specifically, we've found this scalability issue on configurations with
256 cpus, O(1000) cgroups in the hierarchy being throttled, and high
memory bandwidth usage.
To fix this, we can instead unthrottle cfs_rq's asynchronously via a
CSD. Each cpu is responsible for unthrottling itself, thus sharding the
total work more fairly across the system, and avoiding hard lockups.
Signed-off-by: Josh Don <joshdon@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221117005418.3499691-1-joshdon@google.com
Only step forward on the sysctl cleanups for this cycle. This
has been on linux-next since September and this time it goes
with a "Yeah, think so, it just moves stuff around a bit" from
Peter Zijlstra.
-----BEGIN PGP SIGNATURE-----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=M48U
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"Only a small step forward on the sysctl cleanups for this cycle"
* tag 'sysctl-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
sched: Move numa_balancing sysctls to its own file
- A ptrace API cleanup series from Sergey Shtylyov
- Fixes and cleanups for kexec from ye xingchen
- nilfs2 updates from Ryusuke Konishi
- squashfs feature work from Xiaoming Ni: permit configuration of the
filesystem's compression concurrency from the mount command line.
- A series from Akinobu Mita which addresses bound checking errors when
writing to debugfs files.
- A series from Yang Yingliang to address rapido memory leaks
- A series from Zheng Yejian to address possible overflow errors in
encode_comp_t().
- And a whole shower of singleton patches all over the place.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY5efRgAKCRDdBJ7gKXxA
jgvdAP0al6oFDtaSsshIdNhrzcMwfjt6PfVxxHdLmNhF1hX2dwD/SVluS1bPSP7y
0sZp7Ustu3YTb8aFkMl96Y9m9mY1Nwg=
=ga5B
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- A ptrace API cleanup series from Sergey Shtylyov
- Fixes and cleanups for kexec from ye xingchen
- nilfs2 updates from Ryusuke Konishi
- squashfs feature work from Xiaoming Ni: permit configuration of the
filesystem's compression concurrency from the mount command line
- A series from Akinobu Mita which addresses bound checking errors when
writing to debugfs files
- A series from Yang Yingliang to address rapidio memory leaks
- A series from Zheng Yejian to address possible overflow errors in
encode_comp_t()
- And a whole shower of singleton patches all over the place
* tag 'mm-nonmm-stable-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (79 commits)
ipc: fix memory leak in init_mqueue_fs()
hfsplus: fix bug causing custom uid and gid being unable to be assigned with mount
rapidio: devices: fix missing put_device in mport_cdev_open
kcov: fix spelling typos in comments
hfs: Fix OOB Write in hfs_asc2mac
hfs: fix OOB Read in __hfs_brec_find
relay: fix type mismatch when allocating memory in relay_create_buf()
ocfs2: always read both high and low parts of dinode link count
io-mapping: move some code within the include guarded section
kernel: kcsan: kcsan_test: build without structleak plugin
mailmap: update email for Iskren Chernev
eventfd: change int to __u64 in eventfd_signal() ifndef CONFIG_EVENTFD
rapidio: fix possible UAF when kfifo_alloc() fails
relay: use strscpy() is more robust and safer
cpumask: limit visibility of FORCE_NR_CPUS
acct: fix potential integer overflow in encode_comp_t()
acct: fix accuracy loss for input value of encode_comp_t()
linux/init.h: include <linux/build_bug.h> and <linux/stringify.h>
rapidio: rio: fix possible name leak in rio_register_mport()
rapidio: fix possible name leaks when rio_add_device() fails
...
The sysctl_numa_balancing_promote_rate_limit and sysctl_numa_balancing
are part of sched, move them to its own file.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old in
task_numa_work. x86 CMPXCHG instruction returns success in ZF flag, so
this change saves a compare after cmpxchg (and related move instruction in
front of cmpxchg).
No functional change intended.
Link: https://lkml.kernel.org/r/20220822173956.82525-1-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When evaluating the CPU candidates in the perf domain (pd) containing
the previously used CPU (prev_cpu), find_energy_efficient_cpu()
evaluates the energy of the pd:
- without the task (base_energy)
- with the task placed on prev_cpu (if the task fits)
- with the task placed on the CPU with the highest spare capacity,
prev_cpu being excluded from this set
If prev_cpu is already the CPU with the highest spare capacity,
max_spare_cap_cpu will be the CPU with the second highest spare
capacity.
On an Arm64 Juno-r2, with a workload of 10 tasks at a 10% duty cycle,
when prev_cpu and max_spare_cap_cpu are both valid candidates,
prev_spare_cap > max_spare_cap at ~82%.
Thus the energy of the pd when placing the task on max_spare_cap_cpu
is computed with no possible positive outcome 82% most of the time.
Do not consider max_spare_cap_cpu as a valid candidate if
prev_spare_cap > max_spare_cap.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20221006081052.3862167-2-pierre.gondois@arm.com
We do consider thermal pressure in util_fits_cpu() for uclamp_min only.
With the exception of the biggest cores which by definition are the max
performance point of the system and all tasks by definition should fit.
Even under thermal pressure, the capacity of the biggest CPU is the
highest in the system and should still fit every task. Except when it
reaches capacity inversion point, then this is no longer true.
We can handle this by using the inverted capacity as capacity_orig in
util_fits_cpu(). Which not only addresses the problem above, but also
ensure uclamp_max now considers the inverted capacity. Force fitting
a task when a CPU is in this adverse state will contribute to making the
thermal throttling last longer.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-10-qais.yousef@arm.com
Check each performance domain to see if thermal pressure is causing its
capacity to be lower than another performance domain.
We assume that each performance domain has CPUs with the same
capacities, which is similar to an assumption made in energy_model.c
We also assume that thermal pressure impacts all CPUs in a performance
domain equally.
If there're multiple performance domains with the same capacity_orig, we
will trigger a capacity inversion if the domain is under thermal
pressure.
The new cpu_in_capacity_inversion() should help users to know when
information about capacity_orig are not reliable and can opt in to use
the inverted capacity as the 'actual' capacity_orig.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-9-qais.yousef@arm.com
If the utilization of the woken up task is 0, we skip the energy
calculation because it has no impact.
But if the task is boosted (uclamp_min != 0) will have an impact on task
placement and frequency selection. Only skip if the util is truly
0 after applying uclamp values.
Change uclamp_task_cpu() signature to avoid unnecessary additional calls
to uclamp_eff_get(). feec() is the only user now.
Fixes: 732cd75b8c ("sched/fair: Select an energy-efficient CPU on task wake-up")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-8-qais.yousef@arm.com
So that it is now uclamp aware.
This fixes a major problem of busy tasks capped with UCLAMP_MAX keeping
the system in overutilized state which disables EAS and leads to wasting
energy in the long run.
Without this patch running a busy background activity like JIT
compilation on Pixel 6 causes the system to be in overutilized state
74.5% of the time.
With this patch this goes down to 9.79%.
It also fixes another problem when long running tasks that have their
UCLAMP_MIN changed while running such that they need to upmigrate to
honour the new UCLAMP_MIN value. The upmigration doesn't get triggered
because overutilized state never gets set in this state, hence misfit
migration never happens at tick in this case until the task wakes up
again.
Fixes: af24bde8df ("sched/uclamp: Add uclamp support to energy_compute()")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-7-qais.yousef@arm.com
Use the new util_fits_cpu() to ensure migration margin and capacity
pressure are taken into account correctly when uclamp is being used
otherwise we will fail to consider CPUs as fitting in scenarios where
they should.
s/asym_fits_capacity/asym_fits_cpu/ to better reflect what it does now.
Fixes: b4c9c9f156 ("sched/fair: Prefer prev cpu in asymmetric wakeup path")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-6-qais.yousef@arm.com
Use the new util_fits_cpu() to ensure migration margin and capacity
pressure are taken into account correctly when uclamp is being used
otherwise we will fail to consider CPUs as fitting in scenarios where
they should.
Fixes: b4c9c9f156 ("sched/fair: Prefer prev cpu in asymmetric wakeup path")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-5-qais.yousef@arm.com
As reported by Yun Hsiang [1], if a task has its uclamp_min >= 0.8 * 1024,
it'll always pick the previous CPU because fits_capacity() will always
return false in this case.
The new util_fits_cpu() logic should handle this correctly for us beside
more corner cases where similar failures could occur, like when using
UCLAMP_MAX.
We open code uclamp_rq_util_with() except for the clamp() part,
util_fits_cpu() needs the 'raw' values to be passed to it.
Also introduce uclamp_rq_{set, get}() shorthand accessors to get uclamp
value for the rq. Makes the code more readable and ensures the right
rules (use READ_ONCE/WRITE_ONCE) are respected transparently.
[1] https://lists.linaro.org/pipermail/eas-dev/2020-July/001488.html
Fixes: 1d42509e47 ("sched/fair: Make EAS wakeup placement consider uclamp restrictions")
Reported-by: Yun Hsiang <hsiang023167@gmail.com>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-4-qais.yousef@arm.com
So that the new uclamp rules in regard to migration margin and capacity
pressure are taken into account correctly.
Fixes: a7008c07a5 ("sched/fair: Make task_fits_capacity() consider uclamp restrictions")
Co-developed-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-3-qais.yousef@arm.com
fits_capacity() verifies that a util is within 20% margin of the
capacity of a CPU, which is an attempt to speed up upmigration.
But when uclamp is used, this 20% margin is problematic because for
example if a task is boosted to 1024, then it will not fit on any CPU
according to fits_capacity() logic.
Or if a task is boosted to capacity_orig_of(medium_cpu). The task will
end up on big instead on the desired medium CPU.
Similar corner cases exist for uclamp and usage of capacity_of().
Slightest irq pressure on biggest CPU for example will make a 1024
boosted task look like it can't fit.
What we really want is for uclamp comparisons to ignore the migration
margin and capacity pressure, yet retain them for when checking the
_actual_ util signal.
For example, task p:
p->util_avg = 300
p->uclamp[UCLAMP_MIN] = 1024
Will fit a big CPU. But
p->util_avg = 900
p->uclamp[UCLAMP_MIN] = 1024
will not, this should trigger overutilized state because the big CPU is
now *actually* being saturated.
Similar reasoning applies to capping tasks with UCLAMP_MAX. For example:
p->util_avg = 1024
p->uclamp[UCLAMP_MAX] = capacity_orig_of(medium_cpu)
Should fit the task on medium cpus without triggering overutilized
state.
Inlined comments expand more on desired behavior in more scenarios.
Introduce new util_fits_cpu() function which encapsulates the new logic.
The new function is not used anywhere yet, but will be used to update
various users of fits_capacity() in later patches.
Fixes: af24bde8df ("sched/uclamp: Add uclamp support to energy_compute()")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-2-qais.yousef@arm.com
linux-next for a couple of months without, to my knowledge, any negative
reports (or any positive ones, come to that).
- Also the Maple Tree from Liam R. Howlett. An overlapping range-based
tree for vmas. It it apparently slight more efficient in its own right,
but is mainly targeted at enabling work to reduce mmap_lock contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
(https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com).
This has yet to be addressed due to Liam's unfortunately timed
vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down to
the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support
file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY0HaPgAKCRDdBJ7gKXxA
joPjAQDZ5LlRCMWZ1oxLP2NOTp6nm63q9PWcGnmY50FjD/dNlwEAnx7OejCLWGWf
bbTuk6U2+TKgJa4X7+pbbejeoqnt5QU=
=xfWx
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any
negative reports (or any positive ones, come to that).
- Also the Maple Tree from Liam Howlett. An overlapping range-based
tree for vmas. It it apparently slightly more efficient in its own
right, but is mainly targeted at enabling work to reduce mmap_lock
contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
at [1]. This has yet to be addressed due to Liam's unfortunately
timed vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down
to the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
support file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging
activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]
* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
hugetlb: allocate vma lock for all sharable vmas
hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
hugetlb: fix vma lock handling during split vma and range unmapping
mglru: mm/vmscan.c: fix imprecise comments
mm/mglru: don't sync disk for each aging cycle
mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
mm: memcontrol: use do_memsw_account() in a few more places
mm: memcontrol: deprecate swapaccounting=0 mode
mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
mm/secretmem: remove reduntant return value
mm/hugetlb: add available_huge_pages() func
mm: remove unused inline functions from include/linux/mm_inline.h
selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
selftests/vm: add thp collapse shmem testing
selftests/vm: add thp collapse file and tmpfs testing
selftests/vm: modularize thp collapse memory operations
selftests/vm: dedup THP helpers
mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
mm/madvise: add file and shmem support to MADV_COLLAPSE
...
The linked list is slower than walking the VMAs using the maple tree. We
can't use the VMA iterator here because it doesn't support moving to an
earlier position.
Link: https://lkml.kernel.org/r/20220906194824.2110408-49-Liam.Howlett@oracle.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With memory tier support we can have memory only NUMA nodes in the top
tier from which we want to avoid promotion tracking NUMA faults. Update
node_is_toptier to work with memory tiers. All NUMA nodes are by default
top tier nodes. With lower(slower) memory tiers added we consider all
memory tiers above a memory tier having CPU NUMA nodes as a top memory
tier
[sj@kernel.org: include missed header file, memory-tiers.h]
Link: https://lkml.kernel.org/r/20220820190720.248704-1-sj@kernel.org
[akpm@linux-foundation.org: mm/memory.c needs linux/memory-tiers.h]
[aneesh.kumar@linux.ibm.com: make toptier_distance inclusive upper bound of toptiers]
Link: https://lkml.kernel.org/r/20220830081457.118960-1-aneesh.kumar@linux.ibm.com
Link: https://lkml.kernel.org/r/20220818131042.113280-10-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Wei Xu <weixugc@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hesham Almatary <hesham.almatary@huawei.com>
Cc: Jagdish Gediya <jvgediya.oss@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
sched_nr_migrate_break is set to a fix value and never changes so we can
replace it by a define SCHED_NR_MIGRATE_BREAK.
Also, we adjust SCHED_NR_MIGRATE_BREAK to be aligned with the init value
of sysctl_sched_nr_migrate which can be init to different values.
Then, use SCHED_NR_MIGRATE_BREAK to init sysctl_sched_nr_migrate.
The behavior stays unchanged unless you modify sysctl_sched_nr_migrate
trough debugfs.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220825122726.20819-3-vincent.guittot@linaro.org
During load balance, we try at most env->loop_max time to move a task.
But it can happen that the loop_max LRU tasks (ie tail of
the cfs_tasks list) can't be moved to dst_cpu because of affinity.
In this case, loop in the list until we found at least one.
The maximum of detached tasks remained the same as before.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220825122726.20819-2-vincent.guittot@linaro.org
The promotion hot threshold is workload and system configuration
dependent. So in this patch, a method to adjust the hot threshold
automatically is implemented. The basic idea is to control the number of
the candidate promotion pages to match the promotion rate limit. If the
hint page fault latency of a page is less than the hot threshold, we will
try to promote the page, and the page is called the candidate promotion
page.
If the number of the candidate promotion pages in the statistics interval
is much more than the promotion rate limit, the hot threshold will be
decreased to reduce the number of the candidate promotion pages.
Otherwise, the hot threshold will be increased to increase the number of
the candidate promotion pages.
To make the above method works, in each statistics interval, the total
number of the pages to check (on which the hint page faults occur) and the
hot/cold distribution need to be stable. Because the page tables are
scanned linearly in NUMA balancing, but the hot/cold distribution isn't
uniform along the address usually, the statistics interval should be
larger than the NUMA balancing scan period. So in the patch, the max scan
period is used as statistics interval and it works well in our tests.
Link: https://lkml.kernel.org/r/20220713083954.34196-4-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: osalvador <osalvador@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In NUMA balancing memory tiering mode, if there are hot pages in slow
memory node and cold pages in fast memory node, we need to promote/demote
hot/cold pages between the fast and cold memory nodes.
A choice is to promote/demote as fast as possible. But the CPU cycles and
memory bandwidth consumed by the high promoting/demoting throughput will
hurt the latency of some workload because of accessing inflating and slow
memory bandwidth contention.
A way to resolve this issue is to restrict the max promoting/demoting
throughput. It will take longer to finish the promoting/demoting. But
the workload latency will be better. This is implemented in this patch as
the page promotion rate limit mechanism.
The number of the candidate pages to be promoted to the fast memory node
via NUMA balancing is counted, if the count exceeds the limit specified by
the users, the NUMA balancing promotion will be stopped until the next
second.
A new sysctl knob kernel.numa_balancing_promote_rate_limit_MBps is added
for the users to specify the limit.
Link: https://lkml.kernel.org/r/20220713083954.34196-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: osalvador <osalvador@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "memory tiering: hot page selection", v4.
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory nodes need to be identified.
Essentially, the original NUMA balancing implementation selects the mostly
recently accessed (MRU) pages to promote. But this isn't a perfect
algorithm to identify the hot pages. Because the pages with quite low
access frequency may be accessed eventually given the NUMA balancing page
table scanning period could be quite long (e.g. 60 seconds). So in this
patchset, we implement a new hot page identification algorithm based on
the latency between NUMA balancing page table scanning and hint page
fault. Which is a kind of mostly frequently accessed (MFU) algorithm.
In NUMA balancing memory tiering mode, if there are hot pages in slow
memory node and cold pages in fast memory node, we need to promote/demote
hot/cold pages between the fast and cold memory nodes.
A choice is to promote/demote as fast as possible. But the CPU cycles and
memory bandwidth consumed by the high promoting/demoting throughput will
hurt the latency of some workload because of accessing inflating and slow
memory bandwidth contention.
A way to resolve this issue is to restrict the max promoting/demoting
throughput. It will take longer to finish the promoting/demoting. But
the workload latency will be better. This is implemented in this patchset
as the page promotion rate limit mechanism.
The promotion hot threshold is workload and system configuration
dependent. So in this patchset, a method to adjust the hot threshold
automatically is implemented. The basic idea is to control the number of
the candidate promotion pages to match the promotion rate limit.
We used the pmbench memory accessing benchmark tested the patchset on a
2-socket server system with DRAM and PMEM installed. The test results are
as follows,
pmbench score promote rate
(accesses/s) MB/s
------------- ------------
base 146887704.1 725.6
hot selection 165695601.2 544.0
rate limit 162814569.8 165.2
auto adjustment 170495294.0 136.9
From the results above,
With hot page selection patch [1/3], the pmbench score increases about
12.8%, and promote rate (overhead) decreases about 25.0%, compared with
base kernel.
With rate limit patch [2/3], pmbench score decreases about 1.7%, and
promote rate decreases about 69.6%, compared with hot page selection
patch.
With threshold auto adjustment patch [3/3], pmbench score increases about
4.7%, and promote rate decrease about 17.1%, compared with rate limit
patch.
Baolin helped to test the patchset with MySQL on a machine which contains
1 DRAM node (30G) and 1 PMEM node (126G).
sysbench /usr/share/sysbench/oltp_read_write.lua \
......
--tables=200 \
--table-size=1000000 \
--report-interval=10 \
--threads=16 \
--time=120
The tps can be improved about 5%.
This patch (of 3):
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory node need to be identified. Essentially,
the original NUMA balancing implementation selects the mostly recently
accessed (MRU) pages to promote. But this isn't a perfect algorithm to
identify the hot pages. Because the pages with quite low access frequency
may be accessed eventually given the NUMA balancing page table scanning
period could be quite long (e.g. 60 seconds). The most frequently
accessed (MFU) algorithm is better.
So, in this patch we implemented a better hot page selection algorithm.
Which is based on NUMA balancing page table scanning and hint page fault
as follows,
- When the page tables of the processes are scanned to change PTE/PMD
to be PROT_NONE, the current time is recorded in struct page as scan
time.
- When the page is accessed, hint page fault will occur. The scan
time is gotten from the struct page. And The hint page fault
latency is defined as
hint page fault time - scan time
The shorter the hint page fault latency of a page is, the higher the
probability of their access frequency to be higher. So the hint page
fault latency is a better estimation of the page hot/cold.
It's hard to find some extra space in struct page to hold the scan time.
Fortunately, we can reuse some bits used by the original NUMA balancing.
NUMA balancing uses some bits in struct page to store the page accessing
CPU and PID (referring to page_cpupid_xchg_last()). Which is used by the
multi-stage node selection algorithm to avoid to migrate pages shared
accessed by the NUMA nodes back and forth. But for pages in the slow
memory node, even if they are shared accessed by multiple NUMA nodes, as
long as the pages are hot, they need to be promoted to the fast memory
node. So the accessing CPU and PID information are unnecessary for the
slow memory pages. We can reuse these bits in struct page to record the
scan time. For the fast memory pages, these bits are used as before.
For the hot threshold, the default value is 1 second, which works well in
our performance test. All pages with hint page fault latency < hot
threshold will be considered hot.
It's hard for users to determine the hot threshold. So we don't provide a
kernel ABI to set it, just provide a debugfs interface for advanced users
to experiment. We will continue to work on a hot threshold automatic
adjustment mechanism.
The downside of the above method is that the response time to the workload
hot spot changing may be much longer. For example,
- A previous cold memory area becomes hot
- The hint page fault will be triggered. But the hint page fault
latency isn't shorter than the hot threshold. So the pages will
not be promoted.
- When the memory area is scanned again, maybe after a scan period,
the hint page fault latency measured will be shorter than the hot
threshold and the pages will be promoted.
To mitigate this, if there are enough free space in the fast memory node,
the hot threshold will not be used, all pages will be promoted upon the
hint page fault for fast response.
Thanks Zhong Jiang reported and tested the fix for a bug when disabling
memory tiering mode dynamically.
Link: https://lkml.kernel.org/r/20220713083954.34196-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220713083954.34196-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: osalvador <osalvador@suse.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is some ambiguity about task_running() in that it is unrelated
to TASK_RUNNING but instead tests ->on_cpu. As such, rename the thing
task_on_cpu().
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/Yxhkhn55uHZx+NGl@hirez.programming.kicks-ass.net
The sched-domain of this cpu is only used for some heuristics when
SIS_PROP is enabled, and it should be irrelevant whether the local
sd_llc is valid or not, since all we care about is target sd_llc
if !SIS_PROP.
Access the local domain only when there is a need.
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/20220907112000.1854-6-wuyun.abel@bytedance.com
It's uncertain whether idle cores exist or not if shared sched-
domains are not ready, so returning "no idle cores" usually
makes sense.
While __update_idle_core() is an exception, it checks status
of this core and set hint to shared sched-domain if necessary.
So the whole logic of this function depends on the existence
of shared sched-domain, and can certainly bail out early if
it is not available.
It's somehow a little tricky, and as Josh suggested that it
should be transient while the domain isn't ready. So remove
the self-defined default value to make things more clearer.
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Don <joshdon@google.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/20220907112000.1854-5-wuyun.abel@bytedance.com
The function select_idle_core() only gets called when has_idle_cores
is true which can be possible only when sched_smt_present is enabled.
This change also aligns select_idle_core() with select_idle_smt() in
the way that the caller do the check if necessary.
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/20220907112000.1854-4-wuyun.abel@bytedance.com
The prev cpu is checked at the beginning of SIS, and it's unlikely
to be idle before the second check in select_idle_smt(). So we'd
better focus on its SMT siblings.
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Don <joshdon@google.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/20220907112000.1854-3-wuyun.abel@bytedance.com
If two cpus share LLC cache, then the two cores they belong to
are also in the same LLC domain.
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Don <joshdon@google.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/20220907112000.1854-2-wuyun.abel@bytedance.com
post_init_entity_util_avg() init task util_avg according to the cpu util_avg
at the time of fork, which will decay when switched_to_fair() some time later,
we'd better to not set them at all in the case of !fair task.
Suggested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220818124805.601-10-zhouchengming@bytedance.com
When wake_up_new_task(), we use post_init_entity_util_avg() to init
util_avg/runnable_avg based on cpu's util_avg at that time, and
attach task sched_avg to cfs_rq.
Since enqueue_task_fair() -> enqueue_entity() -> update_load_avg()
loop will do attach, we can move this work to update_load_avg().
wake_up_new_task(p)
post_init_entity_util_avg(p)
attach_entity_cfs_rq() --> (1)
activate_task(rq, p)
enqueue_task() := enqueue_task_fair()
enqueue_entity() loop
update_load_avg(cfs_rq, se, UPDATE_TG | DO_ATTACH)
if (!se->avg.last_update_time && (flags & DO_ATTACH))
attach_entity_load_avg() --> (2)
This patch move attach from (1) to (2), update related comments too.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220818124805.601-9-zhouchengming@bytedance.com
commit 7dc603c902 ("sched/fair: Fix PELT integrity for new tasks")
introduce a TASK_NEW state and an unnessary limitation that would fail
when changing cgroup of new forked task.
Because at that time, we can't handle task_change_group_fair() for new
forked fair task which hasn't been woken up by wake_up_new_task(),
which will cause detach on an unattached task sched_avg problem.
This patch delete this unnessary limitation by adding check before do
detach or attach in task_change_group_fair().
So cpu_cgrp_subsys.can_attach() has nothing to do for fair tasks,
only define it in #ifdef CONFIG_RT_GROUP_SCHED.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220818124805.601-8-zhouchengming@bytedance.com
commit 7dc603c902 ("sched/fair: Fix PELT integrity for new tasks")
fixed two load tracking problems for new task, including detach on
unattached new task problem.
There still left another detach on unattached task problem for the task
which has been woken up by try_to_wake_up() and waiting for actually
being woken up by sched_ttwu_pending().
try_to_wake_up(p)
cpu = select_task_rq(p)
if (task_cpu(p) != cpu)
set_task_cpu(p, cpu)
migrate_task_rq_fair()
remove_entity_load_avg() --> unattached
se->avg.last_update_time = 0;
__set_task_cpu()
ttwu_queue(p, cpu)
ttwu_queue_wakelist()
__ttwu_queue_wakelist()
task_change_group_fair()
detach_task_cfs_rq()
detach_entity_cfs_rq()
detach_entity_load_avg() --> detach on unattached task
set_task_rq()
attach_task_cfs_rq()
attach_entity_cfs_rq()
attach_entity_load_avg()
The reason of this problem is similar, we should check in detach_entity_cfs_rq()
that se->avg.last_update_time != 0, before do detach_entity_load_avg().
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220818124805.601-7-zhouchengming@bytedance.com
When we are migrating task out of the CPU, we can combine detach and
propagation into dequeue_entity() to save the detach_entity_cfs_rq()
in migrate_task_rq_fair().
This optimization is like combining DO_ATTACH in the enqueue_entity()
when migrating task to the CPU. So we don't have to traverse the CFS tree
extra time to do the detach_entity_cfs_rq() -> propagate_entity_cfs_rq(),
which wouldn't be called anymore with this patch's change.
detach_task()
deactivate_task()
dequeue_task_fair()
for_each_sched_entity(se)
dequeue_entity()
update_load_avg() /* (1) */
detach_entity_load_avg()
set_task_cpu()
migrate_task_rq_fair()
detach_entity_cfs_rq() /* (2) */
update_load_avg();
detach_entity_load_avg();
propagate_entity_cfs_rq();
for_each_sched_entity()
update_load_avg()
This patch save the detach_entity_cfs_rq() called in (2) by doing
the detach_entity_load_avg() for a CPU migrating task inside (1)
(the task being the first se in the loop)
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220818124805.601-6-zhouchengming@bytedance.com
When reading the sched_avg related code, I found the comments in
enqueue/dequeue_entity() are not updated with the current code.
We don't add/subtract entity's runnable_avg from cfs_rq->runnable_avg
during enqueue/dequeue_entity(), those are done only for attach/detach.
This patch updates the comments to reflect the current code working.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220818124805.601-5-zhouchengming@bytedance.com
set_task_rq() -> set_task_rq_fair() will try to synchronize the blocked
task's sched_avg when migrate, which is not needed for already detached
task.
task_change_group_fair() will detached the task sched_avg from prev cfs_rq
first, so reset sched_avg last_update_time before set_task_rq() to avoid that.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220818124805.601-4-zhouchengming@bytedance.com
We use cpu_cgrp_subsys->fork() to set task group for the new fair task
in cgroup_post_fork().
Since commit b1e8206582 ("sched: Fix yet more sched_fork() races")
has already set_task_rq() for the new fair task in sched_cgroup_fork(),
so cpu_cgrp_subsys->fork() can be removed.
cgroup_can_fork() --> pin parent's sched_task_group
sched_cgroup_fork()
__set_task_cpu()
set_task_rq()
cgroup_post_fork()
ss->fork() := cpu_cgroup_fork()
sched_change_group(..., TASK_SET_GROUP)
task_set_group_fair()
set_task_rq() --> can be removed
After this patch's change, task_change_group_fair() only need to
care about task cgroup migration, make the code much simplier.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20220818124805.601-3-zhouchengming@bytedance.com
Previously we only maintain task se depth in task_move_group_fair(),
if a !fair task change task group, its se depth will not be updated,
so commit eb7a59b2c8 ("sched/fair: Reset se-depth when task switched to FAIR")
fix the problem by updating se depth in switched_to_fair() too.
Then commit daa59407b5 ("sched/fair: Unify switched_{from,to}_fair()
and task_move_group_fair()") unified these two functions, moved se.depth
setting to attach_task_cfs_rq(), which further into attach_entity_cfs_rq()
with commit df217913e7 ("sched/fair: Factorize attach/detach entity").
This patch move task se depth maintenance from attach_entity_cfs_rq()
to set_task_rq(), which will be called when CPU/cgroup change, so its
depth will always be correct.
This patch is preparation for the next patch.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220818124805.601-2-zhouchengming@bytedance.com
There's no good reason to crash a user's system with a BUG_ON(),
chances are high that they'll never even see the crash message on
Xorg, and it won't make it into the syslog either.
By using a WARN_ON_ONCE() we at least give the user a chance to report
any bugs triggered here - instead of getting silent hangs.
None of these WARN_ON_ONCE()s are supposed to trigger, ever - so we ignore
cases where a NULL check is done via a BUG_ON() and we let a NULL
pointer through after a WARN_ON_ONCE().
There's one exception: WARN_ON_ONCE() arguments with side-effects,
such as locking - in this case we use the return value of the
WARN_ON_ONCE(), such as in:
- BUG_ON(!lock_task_sighand(p, &flags));
+ if (WARN_ON_ONCE(!lock_task_sighand(p, &flags)))
+ return;
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/YvSsKcAXISmshtHo@gmail.com
The load_balance_mask and select_rq_mask percpu variables are only used in
kernel/sched/fair.c.
Make them static and move their allocation into init_sched_fair_class().
Replace kzalloc_node() with zalloc_cpumask_var_node() to get rid of the
CONFIG_CPUMASK_OFFSTACK #ifdef and to align with per-cpu cpumask
allocation for RT (local_cpu_mask in init_sched_rt_class()) and DL
class (local_cpu_mask_dl in init_sched_dl_class()).
[ mingo: Tidied up changelog & touched up the code. ]
Signed-off-by: Bing Huang <huangbing@kylinos.cn>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220722213609.3901-1-huangbing775@126.com
After commit 7a82e5f52a ("sched/fair: Merge for each idle cpu loop of ILB"),
_nohz_idle_balance()'s 'idle' parameter is not used anymore, so we can remove it.
Signed-off-by: Hao Jia <jiahao.os@bytedance.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220803130223.70419-1-jiahao.os@bytedance.com
Create an inline helper for conditional code to be only executed on
asymmetric CPU capacity systems. This makes these (currently ~10 and
future) conditions a lot more readable.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20220729111305.1275158-2-dietmar.eggemann@arm.com
The capacity of the CPU available for CFS tasks can be reduced because of
other activities running on the latter. In such case, it's worth trying to
move CFS tasks on a CPU with more available capacity.
The rework of the load balance has filtered the case when the CPU is
classified to be fully busy but its capacity is reduced.
Check if CPU's capacity is reduced while gathering load balance statistic
and classify it group_misfit_task instead of group_fully_busy so we can
try to move the load on another CPU.
Reported-by: David Chen <david.chen@nutanix.com>
Reported-by: Zhang Qiao <zhangqiao22@huawei.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: David Chen <david.chen@nutanix.com>
Tested-by: Zhang Qiao <zhangqiao22@huawei.com>
Link: https://lkml.kernel.org/r/20220708154401.21411-1-vincent.guittot@linaro.org
find_energy_efficient_cpu() integrates a margin to protect tasks from
bouncing back and forth from a CPU to another. This margin is set as being
6% of the total current energy estimated on the system. This however does
not work for two reasons:
1. The energy estimation is not a good absolute value:
compute_energy() used in feec() is a good estimation for task placement as
it allows to compare the energy with and without a task. The computed
delta will give a good overview of the cost for a certain task placement.
It, however, doesn't work as an absolute estimation for the total energy
of the system. First it adds the contribution to idle CPUs into the
energy, second it mixes util_avg with util_est values. util_avg contains
the near history for a CPU usage, it doesn't tell at all what the current
utilization is. A system that has been quite busy in the near past will
hold a very high energy and then a high margin preventing any task
migration to a lower capacity CPU, wasting energy. It even creates a
negative feedback loop: by holding the tasks on a less efficient CPU, the
margin contributes in keeping the energy high.
2. The margin handicaps small tasks:
On a system where the workload is composed mostly of small tasks (which is
often the case on Android), the overall energy will be high enough to
create a margin none of those tasks can cross. On a Pixel4, a small
utilization of 5% on all the CPUs creates a global estimated energy of 140
joules, as per the Energy Model declaration of that same device. This
means, after applying the 6% margin that any migration must save more than
8 joules to happen. No task with a utilization lower than 40 would then be
able to migrate away from the biggest CPU of the system.
The 6% of the overall system energy was brought by the following patch:
(eb92692b25 sched/fair: Speed-up energy-aware wake-ups)
It was previously 6% of the prev_cpu energy. Also, the following one
made this margin value conditional on the clusters where the task fits:
(8d4c97c105 sched/fair: Only compute base_energy_pd if necessary)
We could simply revert that margin change to what it was, but the original
version didn't have strong grounds neither and as demonstrated in (1.) the
estimated energy isn't a good absolute value. Instead, removing it
completely. It is indeed, made possible by recent changes that improved
energy estimation comparison fairness (sched/fair: Remove task_util from
effective utilization in feec()) (PM: EM: Increase energy calculation
precision) and task utilization stabilization (sched/fair: Decay task
util_avg during migration)
Without a margin, we could have feared bouncing between CPUs. But running
LISA's eas_behaviour test coverage on three different platforms (Hikey960,
RB-5 and DB-845) showed no issue.
Removing the energy margin enables more energy-optimized placements for a
more energy efficient system.
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lkml.kernel.org/r/20220621090414.433602-8-vdonnefort@google.com
The energy estimation in find_energy_efficient_cpu() (feec()) relies on
the computation of the effective utilization for each CPU of a perf domain
(PD). This effective utilization is then used as an estimation of the busy
time for this pd. The function effective_cpu_util() which gives this value,
scales the utilization relative to IRQ pressure on the CPU to take into
account that the IRQ time is hidden from the task clock. The IRQ scaling is
as follow:
effective_cpu_util = irq + (cpu_cap - irq)/cpu_cap * util
Where util is the sum of CFS/RT/DL utilization, cpu_cap the capacity of
the CPU and irq the IRQ avg time.
If now we take as an example a task placement which doesn't raise the OPP
on the candidate CPU, we can write the energy delta as:
delta = OPPcost/cpu_cap * (effective_cpu_util(cpu_util + task_util) -
effective_cpu_util(cpu_util))
= OPPcost/cpu_cap * (cpu_cap - irq)/cpu_cap * task_util
We end-up with an energy delta depending on the IRQ avg time, which is a
problem: first the time spent on IRQs by a CPU has no effect on the
additional energy that would be consumed by a task. Second, we don't want
to favour a CPU with a higher IRQ avg time value.
Nonetheless, we need to take the IRQ avg time into account. If a task
placement raises the PD's frequency, it will increase the energy cost for
the entire time where the CPU is busy. A solution is to only use
effective_cpu_util() with the CPU contribution part. The task contribution
is added separately and scaled according to prev_cpu's IRQ time.
No change for the FREQUENCY_UTIL component of the energy estimation. We
still want to get the actual frequency that would be selected after the
task placement.
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lkml.kernel.org/r/20220621090414.433602-7-vdonnefort@google.com
The Perf Domain (PD) cpumask (struct em_perf_domain.cpus) stays
invariant after Energy Model creation, i.e. it is not updated after
CPU hotplug operations.
That's why the PD mask is used in conjunction with the cpu_online_mask
(or Sched Domain cpumask). Thereby the cpu_online_mask is fetched
multiple times (in compute_energy()) during a run-queue selection
for a task.
cpu_online_mask may change during this time which can lead to wrong
energy calculations.
To be able to avoid this, use the select_rq_mask per-cpu cpumask to
create a cpumask out of PD cpumask and cpu_online_mask and pass it
through the function calls of the EAS run-queue selection path.
The PD cpumask for max_spare_cap_cpu/compute_prev_delta selection
(find_energy_efficient_cpu()) is now ANDed not only with the SD mask
but also with the cpu_online_mask. This is fine since this cpumask
has to be in syc with the one used for energy computation
(compute_energy()).
An exclusive cpuset setup with at least one asymmetric CPU capacity
island (hence the additional AND with the SD cpumask) is the obvious
exception here.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lkml.kernel.org/r/20220621090414.433602-6-vdonnefort@google.com
On 21/06/2022 11:04, Vincent Donnefort wrote:
> From: Dietmar Eggemann <dietmar.eggemann@arm.com>
https://lkml.kernel.org/r/202206221253.ZVyGQvPX-lkp@intel.com discovered
that this patch doesn't build anymore (on tip sched/core or linux-next)
because of commit f5b2eeb499 ("sched/fair: Consider CPU affinity when
allowing NUMA imbalance in find_idlest_group()").
New version of [PATCH v11 4/7] sched/fair: Rename select_idle_mask to
select_rq_mask below.
-- >8 --
Decouple the name of the per-cpu cpumask select_idle_mask from its usage
in select_idle_[cpu/capacity]() of the CFS run-queue selection
(select_task_rq_fair()).
This is to support the reuse of this cpumask in the Energy Aware
Scheduling (EAS) path (find_energy_efficient_cpu()) of the CFS run-queue
selection.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lkml.kernel.org/r/250691c7-0e2b-05ab-bedf-b245c11d9400@arm.com
effective_cpu_util() already has a `int cpu' parameter which allows to
retrieve the CPU capacity scale factor (or maximum CPU capacity) inside
this function via an arch_scale_cpu_capacity(cpu).
A lot of code calling effective_cpu_util() (or the shim
sched_cpu_util()) needs the maximum CPU capacity, i.e. it will call
arch_scale_cpu_capacity() already.
But not having to pass it into effective_cpu_util() will make the EAS
wake-up code easier, especially when the maximum CPU capacity reduced
by the thermal pressure is passed through the EAS wake-up functions.
Due to the asymmetric CPU capacity support of arm/arm64 architectures,
arch_scale_cpu_capacity(int cpu) is a per-CPU variable read access via
per_cpu(cpu_scale, cpu) on such a system.
On all other architectures it is a a compile-time constant
(SCHED_CAPACITY_SCALE).
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lkml.kernel.org/r/20220621090414.433602-4-vdonnefort@google.com
Before being migrated to a new CPU, a task sees its PELT values
synchronized with rq last_update_time. Once done, that same task will also
have its sched_avg last_update_time reset. This means the time between
the migration and the last clock update will not be accounted for in
util_avg and a discontinuity will appear. This issue is amplified by the
PELT clock scaling. It takes currently one tick after the CPU being idle
to let clock_pelt catching up clock_task.
This is especially problematic for asymmetric CPU capacity systems which
need stable util_avg signals for task placement and energy estimation.
Ideally, this problem would be solved by updating the runqueue clocks
before the migration. But that would require taking the runqueue lock
which is quite expensive [1]. Instead estimate the missing time and update
the task util_avg with that value.
To that end, we need sched_clock_cpu() but it is a costly function. Limit
the usage to the case where the source CPU is idle as we know this is when
the clock is having the biggest risk of being outdated.
See comment in migrate_se_pelt_lag() for more details about how the PELT
value is estimated. Notice though this estimation doesn't take into account
IRQ and Paravirt time.
[1] https://lkml.kernel.org/r/20190709115759.10451-1-chris.redpath@arm.com
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lkml.kernel.org/r/20220621090414.433602-3-vdonnefort@google.com
Introducing macro helpers u64_u32_{store,load}() to factorize lockless
accesses to u64 variables for 32-bits architectures.
Users are for now cfs_rq.min_vruntime and sched_avg.last_update_time. To
accommodate the later where the copy lies outside of the structure
(cfs_rq.last_udpate_time_copy instead of sched_avg.last_update_time_copy),
use the _copy() version of those helpers.
Those new helpers encapsulate smp_rmb() and smp_wmb() synchronization and
therefore, have a small penalty for 32-bits machines in set_task_rq_fair()
and init_cfs_rq().
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lkml.kernel.org/r/20220621090414.433602-2-vdonnefort@google.com
[Problem Statement]
select_idle_cpu() might spend too much time searching for an idle CPU,
when the system is overloaded.
The following histogram is the time spent in select_idle_cpu(),
when running 224 instances of netperf on a system with 112 CPUs
per LLC domain:
@usecs:
[0] 533 | |
[1] 5495 | |
[2, 4) 12008 | |
[4, 8) 239252 | |
[8, 16) 4041924 |@@@@@@@@@@@@@@ |
[16, 32) 12357398 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[32, 64) 14820255 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[64, 128) 13047682 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[128, 256) 8235013 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[256, 512) 4507667 |@@@@@@@@@@@@@@@ |
[512, 1K) 2600472 |@@@@@@@@@ |
[1K, 2K) 927912 |@@@ |
[2K, 4K) 218720 | |
[4K, 8K) 98161 | |
[8K, 16K) 37722 | |
[16K, 32K) 6715 | |
[32K, 64K) 477 | |
[64K, 128K) 7 | |
netperf latency usecs:
=======
case load Lat_99th std%
TCP_RR thread-224 257.39 ( 0.21)
The time spent in select_idle_cpu() is visible to netperf and might have a negative
impact.
[Symptom analysis]
The patch [1] from Mel Gorman has been applied to track the efficiency
of select_idle_sibling. Copy the indicators here:
SIS Search Efficiency(se_eff%):
A ratio expressed as a percentage of runqueues scanned versus
idle CPUs found. A 100% efficiency indicates that the target,
prev or recent CPU of a task was idle at wakeup. The lower the
efficiency, the more runqueues were scanned before an idle CPU
was found.
SIS Domain Search Efficiency(dom_eff%):
Similar, except only for the slower SIS
patch.
SIS Fast Success Rate(fast_rate%):
Percentage of SIS that used target, prev or
recent CPUs.
SIS Success rate(success_rate%):
Percentage of scans that found an idle CPU.
The test is based on Aubrey's schedtests tool, including netperf, hackbench,
schbench and tbench.
Test on vanilla kernel:
schedstat_parse.py -f netperf_vanilla.log
case load se_eff% dom_eff% fast_rate% success_rate%
TCP_RR 28 threads 99.978 18.535 99.995 100.000
TCP_RR 56 threads 99.397 5.671 99.964 100.000
TCP_RR 84 threads 21.721 6.818 73.632 100.000
TCP_RR 112 threads 12.500 5.533 59.000 100.000
TCP_RR 140 threads 8.524 4.535 49.020 100.000
TCP_RR 168 threads 6.438 3.945 40.309 99.999
TCP_RR 196 threads 5.397 3.718 32.320 99.982
TCP_RR 224 threads 4.874 3.661 25.775 99.767
UDP_RR 28 threads 99.988 17.704 99.997 100.000
UDP_RR 56 threads 99.528 5.977 99.970 100.000
UDP_RR 84 threads 24.219 6.992 76.479 100.000
UDP_RR 112 threads 13.907 5.706 62.538 100.000
UDP_RR 140 threads 9.408 4.699 52.519 100.000
UDP_RR 168 threads 7.095 4.077 44.352 100.000
UDP_RR 196 threads 5.757 3.775 35.764 99.991
UDP_RR 224 threads 5.124 3.704 28.748 99.860
schedstat_parse.py -f schbench_vanilla.log
(each group has 28 tasks)
case load se_eff% dom_eff% fast_rate% success_rate%
normal 1 mthread 99.152 6.400 99.941 100.000
normal 2 mthreads 97.844 4.003 99.908 100.000
normal 3 mthreads 96.395 2.118 99.917 99.998
normal 4 mthreads 55.288 1.451 98.615 99.804
normal 5 mthreads 7.004 1.870 45.597 61.036
normal 6 mthreads 3.354 1.346 20.777 34.230
normal 7 mthreads 2.183 1.028 11.257 21.055
normal 8 mthreads 1.653 0.825 7.849 15.549
schedstat_parse.py -f hackbench_vanilla.log
(each group has 28 tasks)
case load se_eff% dom_eff% fast_rate% success_rate%
process-pipe 1 group 99.991 7.692 99.999 100.000
process-pipe 2 groups 99.934 4.615 99.997 100.000
process-pipe 3 groups 99.597 3.198 99.987 100.000
process-pipe 4 groups 98.378 2.464 99.958 100.000
process-pipe 5 groups 27.474 3.653 89.811 99.800
process-pipe 6 groups 20.201 4.098 82.763 99.570
process-pipe 7 groups 16.423 4.156 77.398 99.316
process-pipe 8 groups 13.165 3.920 72.232 98.828
process-sockets 1 group 99.977 5.882 99.999 100.000
process-sockets 2 groups 99.927 5.505 99.996 100.000
process-sockets 3 groups 99.397 3.250 99.980 100.000
process-sockets 4 groups 79.680 4.258 98.864 99.998
process-sockets 5 groups 7.673 2.503 63.659 92.115
process-sockets 6 groups 4.642 1.584 58.946 88.048
process-sockets 7 groups 3.493 1.379 49.816 81.164
process-sockets 8 groups 3.015 1.407 40.845 75.500
threads-pipe 1 group 99.997 0.000 100.000 100.000
threads-pipe 2 groups 99.894 2.932 99.997 100.000
threads-pipe 3 groups 99.611 4.117 99.983 100.000
threads-pipe 4 groups 97.703 2.624 99.937 100.000
threads-pipe 5 groups 22.919 3.623 87.150 99.764
threads-pipe 6 groups 18.016 4.038 80.491 99.557
threads-pipe 7 groups 14.663 3.991 75.239 99.247
threads-pipe 8 groups 12.242 3.808 70.651 98.644
threads-sockets 1 group 99.990 6.667 99.999 100.000
threads-sockets 2 groups 99.940 5.114 99.997 100.000
threads-sockets 3 groups 99.469 4.115 99.977 100.000
threads-sockets 4 groups 87.528 4.038 99.400 100.000
threads-sockets 5 groups 6.942 2.398 59.244 88.337
threads-sockets 6 groups 4.359 1.954 49.448 87.860
threads-sockets 7 groups 2.845 1.345 41.198 77.102
threads-sockets 8 groups 2.871 1.404 38.512 74.312
schedstat_parse.py -f tbench_vanilla.log
case load se_eff% dom_eff% fast_rate% success_rate%
loopback 28 threads 99.976 18.369 99.995 100.000
loopback 56 threads 99.222 7.799 99.934 100.000
loopback 84 threads 19.723 6.819 70.215 100.000
loopback 112 threads 11.283 5.371 55.371 99.999
loopback 140 threads 0.000 0.000 0.000 0.000
loopback 168 threads 0.000 0.000 0.000 0.000
loopback 196 threads 0.000 0.000 0.000 0.000
loopback 224 threads 0.000 0.000 0.000 0.000
According to the test above, if the system becomes busy, the
SIS Search Efficiency(se_eff%) drops significantly. Although some
benchmarks would finally find an idle CPU(success_rate% = 100%), it is
doubtful whether it is worth it to search the whole LLC domain.
[Proposal]
It would be ideal to have a crystal ball to answer this question:
How many CPUs must a wakeup path walk down, before it can find an idle
CPU? Many potential metrics could be used to predict the number.
One candidate is the sum of util_avg in this LLC domain. The benefit
of choosing util_avg is that it is a metric of accumulated historic
activity, which seems to be smoother than instantaneous metrics
(such as rq->nr_running). Besides, choosing the sum of util_avg
would help predict the load of the LLC domain more precisely, because
SIS_PROP uses one CPU's idle time to estimate the total LLC domain idle
time.
In summary, the lower the util_avg is, the more select_idle_cpu()
should scan for idle CPU, and vice versa. When the sum of util_avg
in this LLC domain hits 85% or above, the scan stops. The reason to
choose 85% as the threshold is that this is the imbalance_pct(117)
when a LLC sched group is overloaded.
Introduce the quadratic function:
y = SCHED_CAPACITY_SCALE - p * x^2
and y'= y / SCHED_CAPACITY_SCALE
x is the ratio of sum_util compared to the CPU capacity:
x = sum_util / (llc_weight * SCHED_CAPACITY_SCALE)
y' is the ratio of CPUs to be scanned in the LLC domain,
and the number of CPUs to scan is calculated by:
nr_scan = llc_weight * y'
Choosing quadratic function is because:
[1] Compared to the linear function, it scans more aggressively when the
sum_util is low.
[2] Compared to the exponential function, it is easier to calculate.
[3] It seems that there is no accurate mapping between the sum of util_avg
and the number of CPUs to be scanned. Use heuristic scan for now.
For a platform with 112 CPUs per LLC, the number of CPUs to scan is:
sum_util% 0 5 15 25 35 45 55 65 75 85 86 ...
scan_nr 112 111 108 102 93 81 65 47 25 1 0 ...
For a platform with 16 CPUs per LLC, the number of CPUs to scan is:
sum_util% 0 5 15 25 35 45 55 65 75 85 86 ...
scan_nr 16 15 15 14 13 11 9 6 3 0 0 ...
Furthermore, to minimize the overhead of calculating the metrics in
select_idle_cpu(), borrow the statistics from periodic load balance.
As mentioned by Abel, on a platform with 112 CPUs per LLC, the
sum_util calculated by periodic load balance after 112 ms would
decay to about 0.5 * 0.5 * 0.5 * 0.7 = 8.75%, thus bringing a delay
in reflecting the latest utilization. But it is a trade-off.
Checking the util_avg in newidle load balance would be more frequent,
but it brings overhead - multiple CPUs write/read the per-LLC shared
variable and introduces cache contention. Tim also mentioned that,
it is allowed to be non-optimal in terms of scheduling for the
short-term variations, but if there is a long-term trend in the load
behavior, the scheduler can adjust for that.
When SIS_UTIL is enabled, the select_idle_cpu() uses the nr_scan
calculated by SIS_UTIL instead of the one from SIS_PROP. As Peter and
Mel suggested, SIS_UTIL should be enabled by default.
This patch is based on the util_avg, which is very sensitive to the
CPU frequency invariance. There is an issue that, when the max frequency
has been clamp, the util_avg would decay insanely fast when
the CPU is idle. Commit addca28512 ("cpufreq: intel_pstate: Handle no_turbo
in frequency invariance") could be used to mitigate this symptom, by adjusting
the arch_max_freq_ratio when turbo is disabled. But this issue is still
not thoroughly fixed, because the current code is unaware of the user-specified
max CPU frequency.
[Test result]
netperf and tbench were launched with 25% 50% 75% 100% 125% 150%
175% 200% of CPU number respectively. Hackbench and schbench were launched
by 1, 2 ,4, 8 groups. Each test lasts for 100 seconds and repeats 3 times.
The following is the benchmark result comparison between
baseline:vanilla v5.19-rc1 and compare:patched kernel. Positive compare%
indicates better performance.
Each netperf test is a:
netperf -4 -H 127.0.1 -t TCP/UDP_RR -c -C -l 100
netperf.throughput
=======
case load baseline(std%) compare%( std%)
TCP_RR 28 threads 1.00 ( 0.34) -0.16 ( 0.40)
TCP_RR 56 threads 1.00 ( 0.19) -0.02 ( 0.20)
TCP_RR 84 threads 1.00 ( 0.39) -0.47 ( 0.40)
TCP_RR 112 threads 1.00 ( 0.21) -0.66 ( 0.22)
TCP_RR 140 threads 1.00 ( 0.19) -0.69 ( 0.19)
TCP_RR 168 threads 1.00 ( 0.18) -0.48 ( 0.18)
TCP_RR 196 threads 1.00 ( 0.16) +194.70 ( 16.43)
TCP_RR 224 threads 1.00 ( 0.16) +197.30 ( 7.85)
UDP_RR 28 threads 1.00 ( 0.37) +0.35 ( 0.33)
UDP_RR 56 threads 1.00 ( 11.18) -0.32 ( 0.21)
UDP_RR 84 threads 1.00 ( 1.46) -0.98 ( 0.32)
UDP_RR 112 threads 1.00 ( 28.85) -2.48 ( 19.61)
UDP_RR 140 threads 1.00 ( 0.70) -0.71 ( 14.04)
UDP_RR 168 threads 1.00 ( 14.33) -0.26 ( 11.16)
UDP_RR 196 threads 1.00 ( 12.92) +186.92 ( 20.93)
UDP_RR 224 threads 1.00 ( 11.74) +196.79 ( 18.62)
Take the 224 threads as an example, the SIS search metrics changes are
illustrated below:
vanilla patched
4544492 +237.5% 15338634 sched_debug.cpu.sis_domain_search.avg
38539 +39686.8% 15333634 sched_debug.cpu.sis_failed.avg
128300000 -87.9% 15551326 sched_debug.cpu.sis_scanned.avg
5842896 +162.7% 15347978 sched_debug.cpu.sis_search.avg
There is -87.9% less CPU scans after patched, which indicates lower overhead.
Besides, with this patch applied, there is -13% less rq lock contention
in perf-profile.calltrace.cycles-pp._raw_spin_lock.raw_spin_rq_lock_nested
.try_to_wake_up.default_wake_function.woken_wake_function.
This might help explain the performance improvement - Because this patch allows
the waking task to remain on the previous CPU, rather than grabbing other CPUs'
lock.
Each hackbench test is a:
hackbench -g $job --process/threads --pipe/sockets -l 1000000 -s 100
hackbench.throughput
=========
case load baseline(std%) compare%( std%)
process-pipe 1 group 1.00 ( 1.29) +0.57 ( 0.47)
process-pipe 2 groups 1.00 ( 0.27) +0.77 ( 0.81)
process-pipe 4 groups 1.00 ( 0.26) +1.17 ( 0.02)
process-pipe 8 groups 1.00 ( 0.15) -4.79 ( 0.02)
process-sockets 1 group 1.00 ( 0.63) -0.92 ( 0.13)
process-sockets 2 groups 1.00 ( 0.03) -0.83 ( 0.14)
process-sockets 4 groups 1.00 ( 0.40) +5.20 ( 0.26)
process-sockets 8 groups 1.00 ( 0.04) +3.52 ( 0.03)
threads-pipe 1 group 1.00 ( 1.28) +0.07 ( 0.14)
threads-pipe 2 groups 1.00 ( 0.22) -0.49 ( 0.74)
threads-pipe 4 groups 1.00 ( 0.05) +1.88 ( 0.13)
threads-pipe 8 groups 1.00 ( 0.09) -4.90 ( 0.06)
threads-sockets 1 group 1.00 ( 0.25) -0.70 ( 0.53)
threads-sockets 2 groups 1.00 ( 0.10) -0.63 ( 0.26)
threads-sockets 4 groups 1.00 ( 0.19) +11.92 ( 0.24)
threads-sockets 8 groups 1.00 ( 0.08) +4.31 ( 0.11)
Each tbench test is a:
tbench -t 100 $job 127.0.0.1
tbench.throughput
======
case load baseline(std%) compare%( std%)
loopback 28 threads 1.00 ( 0.06) -0.14 ( 0.09)
loopback 56 threads 1.00 ( 0.03) -0.04 ( 0.17)
loopback 84 threads 1.00 ( 0.05) +0.36 ( 0.13)
loopback 112 threads 1.00 ( 0.03) +0.51 ( 0.03)
loopback 140 threads 1.00 ( 0.02) -1.67 ( 0.19)
loopback 168 threads 1.00 ( 0.38) +1.27 ( 0.27)
loopback 196 threads 1.00 ( 0.11) +1.34 ( 0.17)
loopback 224 threads 1.00 ( 0.11) +1.67 ( 0.22)
Each schbench test is a:
schbench -m $job -t 28 -r 100 -s 30000 -c 30000
schbench.latency_90%_us
========
case load baseline(std%) compare%( std%)
normal 1 mthread 1.00 ( 31.22) -7.36 ( 20.25)*
normal 2 mthreads 1.00 ( 2.45) -0.48 ( 1.79)
normal 4 mthreads 1.00 ( 1.69) +0.45 ( 0.64)
normal 8 mthreads 1.00 ( 5.47) +9.81 ( 14.28)
*Consider the Standard Deviation, this -7.36% regression might not be valid.
Also, a OLTP workload with a commercial RDBMS has been tested, and there
is no significant change.
There were concerns that unbalanced tasks among CPUs would cause problems.
For example, suppose the LLC domain is composed of 8 CPUs, and 7 tasks are
bound to CPU0~CPU6, while CPU7 is idle:
CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
util_avg 1024 1024 1024 1024 1024 1024 1024 0
Since the util_avg ratio is 87.5%( = 7/8 ), which is higher than 85%,
select_idle_cpu() will not scan, thus CPU7 is undetected during scan.
But according to Mel, it is unlikely the CPU7 will be idle all the time
because CPU7 could pull some tasks via CPU_NEWLY_IDLE.
lkp(kernel test robot) has reported a regression on stress-ng.sock on a
very busy system. According to the sched_debug statistics, it might be caused
by SIS_UTIL terminates the scan and chooses a previous CPU earlier, and this
might introduce more context switch, especially involuntary preemption, which
impacts a busy stress-ng. This regression has shown that, not all benchmarks
in every scenario benefit from idle CPU scan limit, and it needs further
investigation.
Besides, there is slight regression in hackbench's 16 groups case when the
LLC domain has 16 CPUs. Prateek mentioned that we should scan aggressively
in an LLC domain with 16 CPUs. Because the cost to search for an idle one
among 16 CPUs is negligible. The current patch aims to propose a generic
solution and only considers the util_avg. Something like the below could
be applied on top of the current patch to fulfill the requirement:
if (llc_weight <= 16)
nr_scan = nr_scan * 32 / llc_weight;
For LLC domain with 16 CPUs, the nr_scan will be expanded to 2 times large.
The smaller the CPU number this LLC domain has, the larger nr_scan will be
expanded. This needs further investigation.
There is also ongoing work[2] from Abel to filter out the busy CPUs during
wakeup, to further speed up the idle CPU scan. And it could be a following-up
optimization on top of this change.
Suggested-by: Tim Chen <tim.c.chen@intel.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yicong Yang <yangyicong@hisilicon.com>
Tested-by: Mohini Narkhede <mohini.narkhede@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20220612163428.849378-1-yu.c.chen@intel.com
While doing newidle load balancing, it is possible for new tasks to
arrive, such as with pending wakeups. newidle_balance() already accounts
for this by exiting the sched_domain load_balance() iteration if it
detects these cases. This is very important for minimizing wakeup
latency.
However, if we are already in load_balance(), we may stay there for a
while before returning back to newidle_balance(). This is most
exacerbated if we enter a 'goto redo' loop in the LBF_ALL_PINNED case. A
very straightforward workaround to this is to adjust should_we_balance()
to bail out if we're doing a CPU_NEWLY_IDLE balance and new tasks are
detected.
This was tested with the following reproduction:
- two threads that take turns sleeping and waking each other up are
affined to two cores
- a large number of threads with 100% utilization are pinned to all
other cores
Without this patch, wakeup latency was ~120us for the pair of threads,
almost entirely spent in load_balance(). With this patch, wakeup latency
is ~6us.
Signed-off-by: Josh Don <joshdon@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220609025515.2086253-1-joshdon@google.com
We notice the rq leaf_cfs_rq_list has two problems when do bugfix
backports and some test profiling.
1. cfs_rqs under throttled subtree could be added to the list, and
make their fully decayed ancestors on the list, even though not needed.
2. #1 also make the leaf_cfs_rq_list management complex and error prone,
this is the list of related bugfix so far:
commit 31bc6aeaab ("sched/fair: Optimize update_blocked_averages()")
commit fe61468b2c ("sched/fair: Fix enqueue_task_fair warning")
commit b34cb07dde ("sched/fair: Fix enqueue_task_fair() warning some more")
commit 39f23ce07b ("sched/fair: Fix unthrottle_cfs_rq() for leaf_cfs_rq list")
commit 0258bdfaff ("sched/fair: Fix unfairness caused by missing load decay")
commit a7b359fc6a ("sched/fair: Correctly insert cfs_rq's to list on unthrottle")
commit fdaba61ef8 ("sched/fair: Ensure that the CFS parent is added after unthrottling")
commit 2630cde267 ("sched/fair: Add ancestors of unthrottled undecayed cfs_rq")
commit 31bc6aeaab ("sched/fair: Optimize update_blocked_averages()")
delete every cfs_rq under throttled subtree from rq->leaf_cfs_rq_list,
and delete the throttled_hierarchy() test in update_blocked_averages(),
which optimized update_blocked_averages().
But those later bugfix add cfs_rqs under throttled subtree back to
rq->leaf_cfs_rq_list again, with their fully decayed ancestors, for
the integrity of rq->leaf_cfs_rq_list.
This patch takes another method, skip all cfs_rqs under throttled
hierarchy when list_add_leaf_cfs_rq(), to completely make cfs_rqs
under throttled subtree off the leaf_cfs_rq_list.
So we don't need to consider throttled related things in
enqueue_entity(), unthrottle_cfs_rq() and enqueue_task_fair(),
which simplify the code a lot. Also optimize update_blocked_averages()
since cfs_rqs under throttled hierarchy and their ancestors
won't be on the leaf_cfs_rq_list.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220601021848.76943-1-zhouchengming@bytedance.com
In the case of systems containing multiple LLCs per socket, like
AMD Zen systems, users want to spread bandwidth hungry applications
across multiple LLCs. Stream is one such representative workload where
the best performance is obtained by limiting one stream thread per LLC.
To ensure this, users are known to pin the tasks to a specify a subset
of the CPUs consisting of one CPU per LLC while running such bandwidth
hungry tasks.
Suppose we kickstart a multi-threaded task like stream with 8 threads
using taskset or numactl to run on a subset of CPUs on a 2 socket Zen3
server where each socket contains 128 CPUs
(0-63,128-191 in one socket, 64-127,192-255 in another socket)
Eg: numactl -C 0,16,32,48,64,80,96,112 ./stream8
Here each CPU in the list is from a different LLC and 4 of those LLCs
are on one socket, while the other 4 are on another socket.
Ideally we would prefer that each stream thread runs on a different
CPU from the allowed list of CPUs. However, the current heuristics in
find_idlest_group() do not allow this during the initial placement.
Suppose the first socket (0-63,128-191) is our local group from which
we are kickstarting the stream tasks. The first four stream threads
will be placed in this socket. When it comes to placing the 5th
thread, all the allowed CPUs are from the local group (0,16,32,48)
would have been taken.
However, the current scheduler code simply checks if the number of
tasks in the local group is fewer than the allowed numa-imbalance
threshold. This threshold was previously 25% of the NUMA domain span
(in this case threshold = 32) but after the v6 of Mel's patchset
"Adjust NUMA imbalance for multiple LLCs", got merged in sched-tip,
Commit: e496132ebe ("sched/fair: Adjust the allowed NUMA imbalance
when SD_NUMA spans multiple LLCs") it is now equal to number of LLCs
in the NUMA domain, for processors with multiple LLCs.
(in this case threshold = 8).
For this example, the number of tasks will always be within threshold
and thus all the 8 stream threads will be woken up on the first socket
thereby resulting in sub-optimal performance.
The following sched_wakeup_new tracepoint output shows the initial
placement of tasks in the current tip/sched/core on the Zen3 machine:
stream-5313 [016] d..2. 627.005036: sched_wakeup_new: comm=stream pid=5315 prio=120 target_cpu=032
stream-5313 [016] d..2. 627.005086: sched_wakeup_new: comm=stream pid=5316 prio=120 target_cpu=048
stream-5313 [016] d..2. 627.005141: sched_wakeup_new: comm=stream pid=5317 prio=120 target_cpu=000
stream-5313 [016] d..2. 627.005183: sched_wakeup_new: comm=stream pid=5318 prio=120 target_cpu=016
stream-5313 [016] d..2. 627.005218: sched_wakeup_new: comm=stream pid=5319 prio=120 target_cpu=016
stream-5313 [016] d..2. 627.005256: sched_wakeup_new: comm=stream pid=5320 prio=120 target_cpu=016
stream-5313 [016] d..2. 627.005295: sched_wakeup_new: comm=stream pid=5321 prio=120 target_cpu=016
Once the first four threads are distributed among the allowed CPUs of
socket one, the rest of the treads start piling on these same CPUs
when clearly there are CPUs on the second socket that can be used.
Following the initial pile up on a small number of CPUs, though the
load-balancer eventually kicks in, it takes a while to get to {4}{4}
and even {4}{4} isn't stable as we observe a bunch of ping ponging
between {4}{4} to {5}{3} and back before a stable state is reached
much later (1 Stream thread per allowed CPU) and no more migration is
required.
We can detect this piling and avoid it by checking if the number of
allowed CPUs in the local group are fewer than the number of tasks
running in the local group and use this information to spread the
5th task out into the next socket (after all, the goal in this
slowpath is to find the idlest group and the idlest CPU during the
initial placement!).
The following sched_wakeup_new tracepoint output shows the initial
placement of tasks after adding this fix on the Zen3 machine:
stream-4485 [016] d..2. 230.784046: sched_wakeup_new: comm=stream pid=4487 prio=120 target_cpu=032
stream-4485 [016] d..2. 230.784123: sched_wakeup_new: comm=stream pid=4488 prio=120 target_cpu=048
stream-4485 [016] d..2. 230.784167: sched_wakeup_new: comm=stream pid=4489 prio=120 target_cpu=000
stream-4485 [016] d..2. 230.784222: sched_wakeup_new: comm=stream pid=4490 prio=120 target_cpu=112
stream-4485 [016] d..2. 230.784271: sched_wakeup_new: comm=stream pid=4491 prio=120 target_cpu=096
stream-4485 [016] d..2. 230.784322: sched_wakeup_new: comm=stream pid=4492 prio=120 target_cpu=080
stream-4485 [016] d..2. 230.784368: sched_wakeup_new: comm=stream pid=4493 prio=120 target_cpu=064
We see that threads are using all of the allowed CPUs and there is
no pileup.
No output is generated for tracepoint sched_migrate_task with this
patch due to a perfect initial placement which removes the need
for balancing later on - both across NUMA boundaries and within
NUMA boundaries for stream.
Following are the results from running 8 Stream threads with and
without pinning on a dual socket Zen3 Machine (2 x 64C/128T):
During the testing of this patch, the tip sched/core was at
commit: 089c02ae27 "ftrace: Use preemption model accessors for trace
header printout"
Pinning is done using: numactl -C 0,16,32,48,64,80,96,112 ./stream8
5.18.0-rc1 5.18.0-rc1 5.18.0-rc1
tip sched/core tip sched/core tip sched/core
(no pinning) + pinning + this-patch
+ pinning
Copy: 109364.74 (0.00 pct) 94220.50 (-13.84 pct) 158301.28 (44.74 pct)
Scale: 109670.26 (0.00 pct) 90210.59 (-17.74 pct) 149525.64 (36.34 pct)
Add: 129029.01 (0.00 pct) 101906.00 (-21.02 pct) 186658.17 (44.66 pct)
Triad: 127260.05 (0.00 pct) 106051.36 (-16.66 pct) 184327.30 (44.84 pct)
Pinning currently hurts the performance compared to unbound case on
tip/sched/core. With the addition of this patch, we are able to
outperform tip/sched/core by a good margin with pinning.
Following are the results from running 16 Stream threads with and
without pinning on a dual socket IceLake Machine (2 x 32C/64T):
NUMA Topology of Intel Skylake machine:
Node 1: 0,2,4,6 ... 126 (Even numbers)
Node 2: 1,3,5,7 ... 127 (Odd numbers)
Pinning is done using: numactl -C 0-15 ./stream16
5.18.0-rc1 5.18.0-rc1 5.18.0-rc1
tip sched/core tip sched/core tip sched/core
(no pinning) +pinning + this-patch
+ pinning
Copy: 85815.31 (0.00 pct) 149819.21 (74.58 pct) 156807.48 (82.72 pct)
Scale: 64795.60 (0.00 pct) 97595.07 (50.61 pct) 99871.96 (54.13 pct)
Add: 71340.68 (0.00 pct) 111549.10 (56.36 pct) 114598.33 (60.63 pct)
Triad: 68890.97 (0.00 pct) 111635.16 (62.04 pct) 114589.24 (66.33 pct)
In case of Icelake machine, with single LLC per socket, pinning across
the two sockets reduces cache contention, thus showing great
improvement in pinned case which is further benefited by this patch.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lkml.kernel.org/r/20220407111222.22649-1-kprateek.nayak@amd.com
The imbalance limitations are applied inconsistently at fork time
and at runtime. At fork, a new task can remain local until there are
too many running tasks even if the degree of imbalance is larger than
NUMA_IMBALANCE_MIN which is different to runtime. Secondly, the imbalance
figure used during load balancing is different to the one used at NUMA
placement. Load balancing uses the number of tasks that must move to
restore imbalance where as NUMA balancing uses the total imbalance.
In combination, it is possible for a parallel workload that uses a small
number of CPUs without applying scheduler policies to have very variable
run-to-run performance.
[lkp@intel.com: Fix build breakage for arc-allyesconfig]
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20220520103519.1863-4-mgorman@techsingularity.net
If a destination node has spare capacity but there is an imbalance then
two tasks are selected for swapping. If the tasks have no numa group
or are within the same NUMA group, it's simply shuffling tasks around
without having any impact on the compute imbalance. Instead, it's just
punishing one task to help another.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20220520103519.1863-3-mgorman@techsingularity.net
On clone, numa_migrate_retry is inherited from the parent which means
that the first NUMA placement of a task is non-deterministic. This
affects when load balancing recognises numa tasks and whether to
migrate "regular", "remote" or "all" tasks between NUMA scheduler
domains.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20220520103519.1863-2-mgorman@techsingularity.net
ordinary user mode tasks.
In commit 40966e316f ("kthread: Ensure struct kthread is present for
all kthreads") caused init and the user mode helper threads that call
kernel_execve to have struct kthread allocated for them. This struct
kthread going away during execve in turned made a use after free of
struct kthread possible.
The commit 343f4c49f2 ("kthread: Don't allocate kthread_struct for
init and umh") is enough to fix the use after free and is simple enough
to be backportable.
The rest of the changes pass struct kernel_clone_args to clean things
up and cause the code to make sense.
In making init and the user mode helpers tasks purely user mode tasks
I ran into two complications. The function task_tick_numa was
detecting tasks without an mm by testing for the presence of
PF_KTHREAD. The initramfs code in populate_initrd_image was using
flush_delayed_fput to ensuere the closing of all it's file descriptors
was complete, and flush_delayed_fput does not work in a userspace thread.
I have looked and looked and more complications and in my code review
I have not found any, and neither has anyone else with the code sitting
in linux-next.
Link: https://lkml.kernel.org/r/87mtfu4up3.fsf@email.froward.int.ebiederm.org
Eric W. Biederman (8):
kthread: Don't allocate kthread_struct for init and umh
fork: Pass struct kernel_clone_args into copy_thread
fork: Explicity test for idle tasks in copy_thread
fork: Generalize PF_IO_WORKER handling
init: Deal with the init process being a user mode process
fork: Explicitly set PF_KTHREAD
fork: Stop allowing kthreads to call execve
sched: Update task_tick_numa to ignore tasks without an mm
arch/alpha/kernel/process.c | 13 ++++++------
arch/arc/kernel/process.c | 13 ++++++------
arch/arm/kernel/process.c | 12 ++++++-----
arch/arm64/kernel/process.c | 12 ++++++-----
arch/csky/kernel/process.c | 15 ++++++-------
arch/h8300/kernel/process.c | 10 ++++-----
arch/hexagon/kernel/process.c | 12 ++++++-----
arch/ia64/kernel/process.c | 15 +++++++------
arch/m68k/kernel/process.c | 12 ++++++-----
arch/microblaze/kernel/process.c | 12 ++++++-----
arch/mips/kernel/process.c | 13 ++++++------
arch/nios2/kernel/process.c | 12 ++++++-----
arch/openrisc/kernel/process.c | 12 ++++++-----
arch/parisc/kernel/process.c | 18 +++++++++-------
arch/powerpc/kernel/process.c | 15 +++++++------
arch/riscv/kernel/process.c | 12 ++++++-----
arch/s390/kernel/process.c | 12 ++++++-----
arch/sh/kernel/process_32.c | 12 ++++++-----
arch/sparc/kernel/process_32.c | 12 ++++++-----
arch/sparc/kernel/process_64.c | 12 ++++++-----
arch/um/kernel/process.c | 15 +++++++------
arch/x86/include/asm/fpu/sched.h | 2 +-
arch/x86/include/asm/switch_to.h | 8 +++----
arch/x86/kernel/fpu/core.c | 4 ++--
arch/x86/kernel/process.c | 18 +++++++++-------
arch/xtensa/kernel/process.c | 17 ++++++++-------
fs/exec.c | 8 ++++---
include/linux/sched/task.h | 8 +++++--
init/initramfs.c | 2 ++
init/main.c | 2 +-
kernel/fork.c | 46 +++++++++++++++++++++++++++++++++-------
kernel/sched/fair.c | 2 +-
kernel/umh.c | 6 +++---
33 files changed, 234 insertions(+), 160 deletions(-)
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-----BEGIN PGP SIGNATURE-----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=x6fy
-----END PGP SIGNATURE-----
Merge tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull kthread updates from Eric Biederman:
"This updates init and user mode helper tasks to be ordinary user mode
tasks.
Commit 40966e316f ("kthread: Ensure struct kthread is present for
all kthreads") caused init and the user mode helper threads that call
kernel_execve to have struct kthread allocated for them. This struct
kthread going away during execve in turned made a use after free of
struct kthread possible.
Here, commit 343f4c49f2 ("kthread: Don't allocate kthread_struct for
init and umh") is enough to fix the use after free and is simple
enough to be backportable.
The rest of the changes pass struct kernel_clone_args to clean things
up and cause the code to make sense.
In making init and the user mode helpers tasks purely user mode tasks
I ran into two complications. The function task_tick_numa was
detecting tasks without an mm by testing for the presence of
PF_KTHREAD. The initramfs code in populate_initrd_image was using
flush_delayed_fput to ensuere the closing of all it's file descriptors
was complete, and flush_delayed_fput does not work in a userspace
thread.
I have looked and looked and more complications and in my code review
I have not found any, and neither has anyone else with the code
sitting in linux-next"
* tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
sched: Update task_tick_numa to ignore tasks without an mm
fork: Stop allowing kthreads to call execve
fork: Explicitly set PF_KTHREAD
init: Deal with the init process being a user mode process
fork: Generalize PF_IO_WORKER handling
fork: Explicity test for idle tasks in copy_thread
fork: Pass struct kernel_clone_args into copy_thread
kthread: Don't allocate kthread_struct for init and umh
For two kernel releases now kernel/sysctl.c has been being cleaned up
slowly, since the tables were grossly long, sprinkled with tons of #ifdefs and
all this caused merge conflicts with one susbystem or another.
This tree was put together to help try to avoid conflicts with these cleanups
going on different trees at time. So nothing exciting on this pull request,
just cleanups.
I actually had this sysctl-next tree up since v5.18 but I missed sending a
pull request for it on time during the last merge window. And so these changes
have been being soaking up on sysctl-next and so linux-next for a while.
The last change was merged May 4th.
Most of the compile issues were reported by 0day and fixed.
To help avoid a conflict with bpf folks at Daniel Borkmann's request
I merged bpf-next/pr/bpf-sysctl into sysctl-next to get the effor which
moves the BPF sysctls from kernel/sysctl.c to BPF core.
Possible merge conflicts and known resolutions as per linux-next:
bfp:
https://lkml.kernel.org/r/20220414112812.652190b5@canb.auug.org.au
rcu:
https://lkml.kernel.org/r/20220420153746.4790d532@canb.auug.org.au
powerpc:
https://lkml.kernel.org/r/20220520154055.7f964b76@canb.auug.org.au
-----BEGIN PGP SIGNATURE-----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=btwh
-----END PGP SIGNATURE-----
Merge tag 'sysctl-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"For two kernel releases now kernel/sysctl.c has been being cleaned up
slowly, since the tables were grossly long, sprinkled with tons of
#ifdefs and all this caused merge conflicts with one susbystem or
another.
This tree was put together to help try to avoid conflicts with these
cleanups going on different trees at time. So nothing exciting on this
pull request, just cleanups.
Thanks a lot to the Uniontech and Huawei folks for doing some of this
nasty work"
* tag 'sysctl-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (28 commits)
sched: Fix build warning without CONFIG_SYSCTL
reboot: Fix build warning without CONFIG_SYSCTL
kernel/kexec_core: move kexec_core sysctls into its own file
sysctl: minor cleanup in new_dir()
ftrace: fix building with SYSCTL=y but DYNAMIC_FTRACE=n
fs/proc: Introduce list_for_each_table_entry for proc sysctl
mm: fix unused variable kernel warning when SYSCTL=n
latencytop: move sysctl to its own file
ftrace: fix building with SYSCTL=n but DYNAMIC_FTRACE=y
ftrace: Fix build warning
ftrace: move sysctl_ftrace_enabled to ftrace.c
kernel/do_mount_initrd: move real_root_dev sysctls to its own file
kernel/delayacct: move delayacct sysctls to its own file
kernel/acct: move acct sysctls to its own file
kernel/panic: move panic sysctls to its own file
kernel/lockdep: move lockdep sysctls to its own file
mm: move page-writeback sysctls to their own file
mm: move oom_kill sysctls to their own file
kernel/reboot: move reboot sysctls to its own file
sched: Move energy_aware sysctls to topology.c
...
Qian Cai <quic_qiancai@quicinc.com> wrote:
> Reverting the last 3 commits of the series fixed a boot crash.
>
> 1b2552cbdb fork: Stop allowing kthreads to call execve
> 753550eb0c fork: Explicitly set PF_KTHREAD
> 68d85f0a33 init: Deal with the init process being a user mode process
>
> BUG: KASAN: null-ptr-deref in task_nr_scan_windows.isra.0
> arch_atomic_long_read at ./include/linux/atomic/atomic-long.h:29
> (inlined by) atomic_long_read at ./include/linux/atomic/atomic-instrumented.h:1266
> (inlined by) get_mm_counter at ./include/linux/mm.h:1996
> (inlined by) get_mm_rss at ./include/linux/mm.h:2049
> (inlined by) task_nr_scan_windows at kernel/sched/fair.c:1123
> Read of size 8 at addr 00000000000003d0 by task swapper/0/1
With the change to init and the user mode helper processes to not have
PF_KTHREAD set before they call kernel_execve the PF_KTHREAD test in
task_tick_numa became insufficient to detect all tasks that have
"->mm == NULL". Correct that by testing for "->mm == NULL" directly.
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Tested-by: Qian Cai <quic_qiancai@quicinc.com>
Fixes: 1b2552cbdb ("fork: Stop allowing kthreads to call execve")
Link: https://lkml.kernel.org/r/87r150ug1l.fsf_-_@email.froward.int.ebiederm.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmJu9FYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGAyEH/16xtJSpLmLwrQzG
o+4ToQxSQ+/9UHyu0RTEvHg2THm9/8emtIuYyc/5FgdoWctcSa3AaDcveWmuWmkS
KYcdhfJsaEqjNHS3OPYXN84fmo9Hel7263shu5+IYmP/sN0DfQp6UWTryX1q4B3Q
4Pdutkuq63Uwd8nBZ5LXQBumaBrmkkuMgWEdT4+6FOo1mPzwdIGBxCuz1UsNNl5k
chLWxkQfe2eqgWbYJrgCQfrVdORXVtoU2fGilZUNrHRVGkkldXkkz5clJfapyZD3
odmZCEbrE4GPKgZwCmDERMfD1hzhZDtYKiHfOQ506szH5ykJjPBcOjHed7dA60eB
J3+wdek=
=39Ca
-----END PGP SIGNATURE-----
Merge tag 'v5.18-rc5' into sched/core to pull in fixes & to resolve a conflict
- sched/core is on a pretty old -rc1 base - refresh it to include recent fixes.
- this also allows up to resolve a (trivial) .mailmap conflict
Conflicts:
.mailmap
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A W=1 build emits more than a dozen missing prototype warnings related to
scheduler and scheduler specific includes.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220413133024.249118058@linutronix.de
cfs_rq_tg_path() is used by a tracepoint-to traceevent (tp-2-te)
converter to format the path of a taskgroup or autogroup respectively.
It doesn't have any in-kernel users after the removal of the
sched_trace_cfs_rq_path() helper function.
cfs_rq_tg_path() can be coded in a tp-2-te converter.
Remove it from kernel/sched/fair.c.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220428144338.479094-3-qais.yousef@arm.com
We no longer need them as we can use DWARF debug info or BTF + pahole to
re-generate the required structs to compile against them for a given
kernel.
This moves the burden of maintaining these helper functions to the
module.
https://github.com/qais-yousef/sched_tp
Note that pahole v1.15 is required at least for using DWARF. And for BTF
v1.23 which is not yet released will be required. There's alignment
problem that will lead to crashes in earlier versions when used with
BTF.
We should have enough infrastructure to make these helper functions now
obsolete, so remove them.
[Rewrote commit message to reflect the new alternative]
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220428144338.479094-2-qais.yousef@arm.com
Except the 'task has no contribution or is new' condition at the
beginning of cpu_util_without(), which it shares with the load and
runnable counterpart functions, a cpu_util_next(..., dst_cpu = -1)
call can replace the rest of it.
The UTIL_EST specific check that task util_est has to be subtracted
from the CPU one in case of an enqueued (or current (to cater for the
wakeup - lb race)) task has to be moved to cpu_util_next().
This was initially introduced by commit c469933e77
("sched/fair: Fix cpu_util_wake() for 'execl' type workloads").
UnixBench's `execl` throughput tests were run on the dual socket 40
CPUs Intel E5-2690 v2 to make sure it doesn't regress again.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220318163656.954440-1-dietmar.eggemann@arm.com
If busiest group type is group_misfit_task, the local
group type must be group_has_spare according to below
code in update_sd_pick_busiest():
if (sgs->group_type == group_misfit_task &&
(!capacity_greater(capacity_of(env->dst_cpu), sg->sgc->max_capacity) ||
sds->local_stat.group_type != group_has_spare))
return false;
group type imbalanced and overloaded and fully_busy are filtered in here.
misfit and asym are filtered before in update_sg_lb_stats().
So, change the decision matrix to:
busiest \ local has_spare fully_busy misfit asym imbalanced overloaded
has_spare nr_idle balanced N/A N/A balanced balanced
fully_busy nr_idle nr_idle N/A N/A balanced balanced
misfit_task force N/A N/A N/A *N/A* *N/A*
asym_packing force force N/A N/A force force
imbalanced force force N/A N/A force force
overloaded force force N/A N/A force avg_load
Fixes: 0b0695f2b3 ("sched/fair: Rework load_balance()")
Signed-off-by: Tao Zhou <tao.zhou@linux.dev>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20220415095505.7765-1-tao.zhou@linux.dev
We have tested cfs_rq->load.weight in cfs_rq_is_decayed(),
the first condition "!cfs_rq_is_decayed(cfs_rq)" is enough
to cover the second condition "cfs_rq->nr_running".
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220408115309.81603-2-zhouchengming@bytedance.com
Since commit 2312729688 ("sched/fair: Update scale invariance of PELT")
change to use rq_clock_pelt() instead of rq_clock_task(), we should also
use rq_clock_pelt() for throttled_clock_task_time and throttled_clock_task
accounting to get correct cfs_rq_clock_pelt() of throttled cfs_rq. And
rename throttled_clock_task(_time) to be clock_pelt rather than clock_task.
Fixes: 2312729688 ("sched/fair: Update scale invariance of PELT")
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220408115309.81603-1-zhouchengming@bytedance.com
In calculate_imbalance function, when the value of local->avg_load is
greater than or equal to busiest->avg_load, the calculated sds->avg_load is
not used. So this calculation can be placed in a more appropriate position.
Signed-off-by: zgpeng <zgpeng@tencent.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Samuel Liao <samuelliao@tencent.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/1649239025-10010-1-git-send-email-zgpeng@tencent.com
The warning in cfs_rq_is_decayed() triggered:
SCHED_WARN_ON(cfs_rq->avg.load_avg ||
cfs_rq->avg.util_avg ||
cfs_rq->avg.runnable_avg)
There exists a corner case in attach_entity_load_avg() which will
cause load_sum to be zero while load_avg will not be.
Consider se_weight is 88761 as per the sched_prio_to_weight[] table.
Further assume the get_pelt_divider() is 47742, this gives:
se->avg.load_avg is 1.
However, calculating load_sum:
se->avg.load_sum = div_u64(se->avg.load_avg * se->avg.load_sum, se_weight(se));
se->avg.load_sum = 1*47742/88761 = 0.
Then enqueue_load_avg() adds this to the cfs_rq totals:
cfs_rq->avg.load_avg += se->avg.load_avg;
cfs_rq->avg.load_sum += se_weight(se) * se->avg.load_sum;
Resulting in load_avg being 1 with load_sum is 0, which will trigger
the WARN.
Fixes: f207934fb7 ("sched/fair: Align PELT windows between cfs_rq and its se")
Signed-off-by: kuyo chang <kuyo.chang@mediatek.com>
[peterz: massage changelog]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lkml.kernel.org/r/20220414090229.342-1-kuyo.chang@mediatek.com
move cfs_bandwidth_slice sysctls to fair.c and use the
new register_sysctl_init() to register the sysctl interface.
Signed-off-by: Zhen Ni <nizhen@uniontech.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
move child_runs_first sysctls to fair.c and use the new
register_sysctl_init() to register the sysctl interface.
Signed-off-by: Zhen Ni <nizhen@uniontech.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
This set of changes removes tracehook.h, moves modification of all of
the ptrace fields inside of siglock to remove races, adds a missing
permission check to ptrace.c
The removal of tracehook.h is quite significant as it has been a major
source of confusion in recent years. Much of that confusion was
around task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled
making the semantics clearer).
For people who don't know tracehook.h is a vestiage of an attempt to
implement uprobes like functionality that was never fully merged, and
was later superseeded by uprobes when uprobes was merged. For many
years now we have been removing what tracehook functionaly a little
bit at a time. To the point where now anything left in tracehook.h is
some weird strange thing that is difficult to understand.
Eric W. Biederman (15):
ptrace: Move ptrace_report_syscall into ptrace.h
ptrace/arm: Rename tracehook_report_syscall report_syscall
ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
ptrace: Remove arch_syscall_{enter,exit}_tracehook
ptrace: Remove tracehook_signal_handler
task_work: Remove unnecessary include from posix_timers.h
task_work: Introduce task_work_pending
task_work: Call tracehook_notify_signal from get_signal on all architectures
task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
resume_user_mode: Move to resume_user_mode.h
tracehook: Remove tracehook.h
ptrace: Move setting/clearing ptrace_message into ptrace_stop
ptrace: Return the signal to continue with from ptrace_stop
Jann Horn (1):
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
Yang Li (1):
ptrace: Remove duplicated include in ptrace.c
MAINTAINERS | 1 -
arch/Kconfig | 5 +-
arch/alpha/kernel/ptrace.c | 5 +-
arch/alpha/kernel/signal.c | 4 +-
arch/arc/kernel/ptrace.c | 5 +-
arch/arc/kernel/signal.c | 4 +-
arch/arm/kernel/ptrace.c | 12 +-
arch/arm/kernel/signal.c | 4 +-
arch/arm64/kernel/ptrace.c | 14 +--
arch/arm64/kernel/signal.c | 4 +-
arch/csky/kernel/ptrace.c | 5 +-
arch/csky/kernel/signal.c | 4 +-
arch/h8300/kernel/ptrace.c | 5 +-
arch/h8300/kernel/signal.c | 4 +-
arch/hexagon/kernel/process.c | 4 +-
arch/hexagon/kernel/signal.c | 1 -
arch/hexagon/kernel/traps.c | 6 +-
arch/ia64/kernel/process.c | 4 +-
arch/ia64/kernel/ptrace.c | 6 +-
arch/ia64/kernel/signal.c | 1 -
arch/m68k/kernel/ptrace.c | 5 +-
arch/m68k/kernel/signal.c | 4 +-
arch/microblaze/kernel/ptrace.c | 5 +-
arch/microblaze/kernel/signal.c | 4 +-
arch/mips/kernel/ptrace.c | 5 +-
arch/mips/kernel/signal.c | 4 +-
arch/nds32/include/asm/syscall.h | 2 +-
arch/nds32/kernel/ptrace.c | 5 +-
arch/nds32/kernel/signal.c | 4 +-
arch/nios2/kernel/ptrace.c | 5 +-
arch/nios2/kernel/signal.c | 4 +-
arch/openrisc/kernel/ptrace.c | 5 +-
arch/openrisc/kernel/signal.c | 4 +-
arch/parisc/kernel/ptrace.c | 7 +-
arch/parisc/kernel/signal.c | 4 +-
arch/powerpc/kernel/ptrace/ptrace.c | 8 +-
arch/powerpc/kernel/signal.c | 4 +-
arch/riscv/kernel/ptrace.c | 5 +-
arch/riscv/kernel/signal.c | 4 +-
arch/s390/include/asm/entry-common.h | 1 -
arch/s390/kernel/ptrace.c | 1 -
arch/s390/kernel/signal.c | 5 +-
arch/sh/kernel/ptrace_32.c | 5 +-
arch/sh/kernel/signal_32.c | 4 +-
arch/sparc/kernel/ptrace_32.c | 5 +-
arch/sparc/kernel/ptrace_64.c | 5 +-
arch/sparc/kernel/signal32.c | 1 -
arch/sparc/kernel/signal_32.c | 4 +-
arch/sparc/kernel/signal_64.c | 4 +-
arch/um/kernel/process.c | 4 +-
arch/um/kernel/ptrace.c | 5 +-
arch/x86/kernel/ptrace.c | 1 -
arch/x86/kernel/signal.c | 5 +-
arch/x86/mm/tlb.c | 1 +
arch/xtensa/kernel/ptrace.c | 5 +-
arch/xtensa/kernel/signal.c | 4 +-
block/blk-cgroup.c | 2 +-
fs/coredump.c | 1 -
fs/exec.c | 1 -
fs/io-wq.c | 6 +-
fs/io_uring.c | 11 +-
fs/proc/array.c | 1 -
fs/proc/base.c | 1 -
include/asm-generic/syscall.h | 2 +-
include/linux/entry-common.h | 47 +-------
include/linux/entry-kvm.h | 2 +-
include/linux/posix-timers.h | 1 -
include/linux/ptrace.h | 81 ++++++++++++-
include/linux/resume_user_mode.h | 64 ++++++++++
include/linux/sched/signal.h | 17 +++
include/linux/task_work.h | 5 +
include/linux/tracehook.h | 226 -----------------------------------
include/uapi/linux/ptrace.h | 2 +-
kernel/entry/common.c | 19 +--
kernel/entry/kvm.c | 9 +-
kernel/exit.c | 3 +-
kernel/livepatch/transition.c | 1 -
kernel/ptrace.c | 47 +++++---
kernel/seccomp.c | 1 -
kernel/signal.c | 62 +++++-----
kernel/task_work.c | 4 +-
kernel/time/posix-cpu-timers.c | 1 +
mm/memcontrol.c | 2 +-
security/apparmor/domain.c | 1 -
security/selinux/hooks.c | 1 -
85 files changed, 372 insertions(+), 495 deletions(-)
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-----BEGIN PGP SIGNATURE-----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=uEro
-----END PGP SIGNATURE-----
Merge tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ptrace cleanups from Eric Biederman:
"This set of changes removes tracehook.h, moves modification of all of
the ptrace fields inside of siglock to remove races, adds a missing
permission check to ptrace.c
The removal of tracehook.h is quite significant as it has been a major
source of confusion in recent years. Much of that confusion was around
task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled making the
semantics clearer).
For people who don't know tracehook.h is a vestiage of an attempt to
implement uprobes like functionality that was never fully merged, and
was later superseeded by uprobes when uprobes was merged. For many
years now we have been removing what tracehook functionaly a little
bit at a time. To the point where anything left in tracehook.h was
some weird strange thing that was difficult to understand"
* tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ptrace: Remove duplicated include in ptrace.c
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
ptrace: Return the signal to continue with from ptrace_stop
ptrace: Move setting/clearing ptrace_message into ptrace_stop
tracehook: Remove tracehook.h
resume_user_mode: Move to resume_user_mode.h
resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
task_work: Call tracehook_notify_signal from get_signal on all architectures
task_work: Introduce task_work_pending
task_work: Remove unnecessary include from posix_timers.h
ptrace: Remove tracehook_signal_handler
ptrace: Remove arch_syscall_{enter,exit}_tracehook
ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
ptrace/arm: Rename tracehook_report_syscall report_syscall
ptrace: Move ptrace_report_syscall into ptrace.h
Qian Cai reported a boot crash on arm64 systems, caused by:
0fb3978b0a ("sched/numa: Fix NUMA topology for systems with CPU-less nodes")
The bug is that node_state() must be supplied a valid node_states[] array index,
but in task_numa_placement() the max_nid search can fail with NUMA_NO_NODE,
which is not a valid index.
Fix it by checking that max_nid is a valid index.
[ mingo: Added changelog. ]
Fixes: 0fb3978b0a ("sched/numa: Fix NUMA topology for systems with CPU-less nodes")
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Tested-by: Qian Cai <quic_qiancai@quicinc.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use all generic headers from kernel/sched/sched.h that are required
for it to build.
Sort the sections alphabetically.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
kernel/sched/sched.h is a weird mix of ad-hoc headers included
in the middle of the header.
Two of them rely on being included in the middle of kernel/sched/sched.h,
due to definitions they require:
- "stat.h" needs the rq definitions.
- "autogroup.h" needs the task_group definition.
Move the inclusion of these two files out of kernel/sched/sched.h, and
include them in all files that require them.
Move of the rest of the header dependencies to the top of the
kernel/sched/sched.h file.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmISrYgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGg20IAKDZr7rfSHBopjQV
Cocw744tom0XuxpvSZpp2GGOOXF+tkswcNNaRIrbGOl1mkyxA7eBZCTMpDeDS9aQ
wB0D0Gxx8QBAJp4KgB1W7TB+hIGes/rs8Ve+6iO4ulLLdCVWX/q2boI0aZ7QX9O9
qNi8OsoZQtk6falRvciZFHwV5Av1p2Sy1AW57udQ7DvJ4H98AfKf1u8/z208WWW8
1ixC+qJxQcUcM9vI+7P9Tt7NbFSKv8SvAmqjFY7P+DxQAsVw6KXoqVXykDzeOv0t
fUNOE/t0oFZafwtn8h7KBQnwS9lH03+3KkslVZs+iMFyUj/Bar+NVVyKoDhWXtVg
/PuMhEg=
=eU1o
-----END PGP SIGNATURE-----
Merge tag 'v5.17-rc5' into sched/core, to resolve conflicts
New conflicts in sched/core due to the following upstream fixes:
44585f7bc0 ("psi: fix "defined but not used" warnings when CONFIG_PROC_FS=n")
a06247c680 ("psi: Fix uaf issue when psi trigger is destroyed while being polled")
Conflicts:
include/linux/psi_types.h
kernel/sched/psi.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Refer to housekeeping APIs using single feature types instead of flags.
This prevents from passing multiple isolation features at once to
housekeeping interfaces, which soon won't be possible anymore as each
isolation features will have their own cpumask.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Phil Auld <pauld@redhat.com>
Link: https://lore.kernel.org/r/20220207155910.527133-5-frederic@kernel.org
In a typical memory tiering system, there's no CPU in slow (PMEM) NUMA
nodes. But if the number of the hint page faults on a PMEM node is
the max for a task, The current NUMA balancing policy may try to place
the task on the PMEM node instead of DRAM node. This is unreasonable,
because there's no CPU in PMEM NUMA nodes. To fix this, CPU-less
nodes are ignored when searching the migration target node for a task
in this patch.
To test the patch, we run a workload that accesses more memory in PMEM
node than memory in DRAM node. Without the patch, the PMEM node will
be chosen as preferred node in task_numa_placement(). While the DRAM
node will be chosen instead with the patch.
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220214121553.582248-2-ying.huang@intel.com
The NUMA topology parameters (sched_numa_topology_type,
sched_domains_numa_levels, and sched_max_numa_distance, etc.)
identified by scheduler may be wrong for systems with CPU-less nodes.
For example, the ACPI SLIT of a system with CPU-less persistent
memory (Intel Optane DCPMM) nodes is as follows,
[000h 0000 4] Signature : "SLIT" [System Locality Information Table]
[004h 0004 4] Table Length : 0000042C
[008h 0008 1] Revision : 01
[009h 0009 1] Checksum : 59
[00Ah 0010 6] Oem ID : "XXXX"
[010h 0016 8] Oem Table ID : "XXXXXXX"
[018h 0024 4] Oem Revision : 00000001
[01Ch 0028 4] Asl Compiler ID : "INTL"
[020h 0032 4] Asl Compiler Revision : 20091013
[024h 0036 8] Localities : 0000000000000004
[02Ch 0044 4] Locality 0 : 0A 15 11 1C
[030h 0048 4] Locality 1 : 15 0A 1C 11
[034h 0052 4] Locality 2 : 11 1C 0A 1C
[038h 0056 4] Locality 3 : 1C 11 1C 0A
While the `numactl -H` output is as follows,
available: 4 nodes (0-3)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71
node 0 size: 64136 MB
node 0 free: 5981 MB
node 1 cpus: 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95
node 1 size: 64466 MB
node 1 free: 10415 MB
node 2 cpus:
node 2 size: 253952 MB
node 2 free: 253920 MB
node 3 cpus:
node 3 size: 253952 MB
node 3 free: 253951 MB
node distances:
node 0 1 2 3
0: 10 21 17 28
1: 21 10 28 17
2: 17 28 10 28
3: 28 17 28 10
In this system, there are only 2 sockets. In each memory controller,
both DRAM and PMEM DIMMs are installed. Although the physical NUMA
topology is simple, the logical NUMA topology becomes a little
complex. Because both the distance(0, 1) and distance (1, 3) are less
than the distance (0, 3), it appears that node 1 sits between node 0
and node 3. And the whole system appears to be a glueless mesh NUMA
topology type. But it's definitely not, there is even no CPU in node 3.
This isn't a practical problem now yet. Because the PMEM nodes (node
2 and node 3 in example system) are offlined by default during system
boot. So init_numa_topology_type() called during system boot will
ignore them and set sched_numa_topology_type to NUMA_DIRECT. And
init_numa_topology_type() is only called at runtime when a CPU of a
never-onlined-before node gets plugged in. And there's no CPU in the
PMEM nodes. But it appears better to fix this to make the code more
robust.
To test the potential problem. We have used a debug patch to call
init_numa_topology_type() when the PMEM node is onlined (in
__set_migration_target_nodes()). With that, the NUMA parameters
identified by scheduler is as follows,
sched_numa_topology_type: NUMA_GLUELESS_MESH
sched_domains_numa_levels: 4
sched_max_numa_distance: 28
To fix the issue, the CPU-less nodes are ignored when the NUMA topology
parameters are identified. Because a node may become CPU-less or not
at run time because of CPU hotplug, the NUMA topology parameters need
to be re-initialized at runtime for CPU hotplug too.
With the patch, the NUMA parameters identified for the example system
above is as follows,
sched_numa_topology_type: NUMA_DIRECT
sched_domains_numa_levels: 2
sched_max_numa_distance: 21
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220214121553.582248-1-ying.huang@intel.com
Commit 7d2b5dd0bc ("sched/numa: Allow a floating imbalance between NUMA
nodes") allowed an imbalance between NUMA nodes such that communicating
tasks would not be pulled apart by the load balancer. This works fine when
there is a 1:1 relationship between LLC and node but can be suboptimal
for multiple LLCs if independent tasks prematurely use CPUs sharing cache.
Zen* has multiple LLCs per node with local memory channels and due to
the allowed imbalance, it's far harder to tune some workloads to run
optimally than it is on hardware that has 1 LLC per node. This patch
allows an imbalance to exist up to the point where LLCs should be balanced
between nodes.
On a Zen3 machine running STREAM parallelised with OMP to have on instance
per LLC the results and without binding, the results are
5.17.0-rc0 5.17.0-rc0
vanilla sched-numaimb-v6
MB/sec copy-16 162596.94 ( 0.00%) 580559.74 ( 257.05%)
MB/sec scale-16 136901.28 ( 0.00%) 374450.52 ( 173.52%)
MB/sec add-16 157300.70 ( 0.00%) 564113.76 ( 258.62%)
MB/sec triad-16 151446.88 ( 0.00%) 564304.24 ( 272.61%)
STREAM can use directives to force the spread if the OpenMP is new
enough but that doesn't help if an application uses threads and
it's not known in advance how many threads will be created.
Coremark is a CPU and cache intensive benchmark parallelised with
threads. When running with 1 thread per core, the vanilla kernel
allows threads to contend on cache. With the patch;
5.17.0-rc0 5.17.0-rc0
vanilla sched-numaimb-v5
Min Score-16 368239.36 ( 0.00%) 389816.06 ( 5.86%)
Hmean Score-16 388607.33 ( 0.00%) 427877.08 * 10.11%*
Max Score-16 408945.69 ( 0.00%) 481022.17 ( 17.62%)
Stddev Score-16 15247.04 ( 0.00%) 24966.82 ( -63.75%)
CoeffVar Score-16 3.92 ( 0.00%) 5.82 ( -48.48%)
It can also make a big difference for semi-realistic workloads
like specjbb which can execute arbitrary numbers of threads without
advance knowledge of how they should be placed. Even in cases where
the average performance is neutral, the results are more stable.
5.17.0-rc0 5.17.0-rc0
vanilla sched-numaimb-v6
Hmean tput-1 71631.55 ( 0.00%) 73065.57 ( 2.00%)
Hmean tput-8 582758.78 ( 0.00%) 556777.23 ( -4.46%)
Hmean tput-16 1020372.75 ( 0.00%) 1009995.26 ( -1.02%)
Hmean tput-24 1416430.67 ( 0.00%) 1398700.11 ( -1.25%)
Hmean tput-32 1687702.72 ( 0.00%) 1671357.04 ( -0.97%)
Hmean tput-40 1798094.90 ( 0.00%) 2015616.46 * 12.10%*
Hmean tput-48 1972731.77 ( 0.00%) 2333233.72 ( 18.27%)
Hmean tput-56 2386872.38 ( 0.00%) 2759483.38 ( 15.61%)
Hmean tput-64 2909475.33 ( 0.00%) 2925074.69 ( 0.54%)
Hmean tput-72 2585071.36 ( 0.00%) 2962443.97 ( 14.60%)
Hmean tput-80 2994387.24 ( 0.00%) 3015980.59 ( 0.72%)
Hmean tput-88 3061408.57 ( 0.00%) 3010296.16 ( -1.67%)
Hmean tput-96 3052394.82 ( 0.00%) 2784743.41 ( -8.77%)
Hmean tput-104 2997814.76 ( 0.00%) 2758184.50 ( -7.99%)
Hmean tput-112 2955353.29 ( 0.00%) 2859705.09 ( -3.24%)
Hmean tput-120 2889770.71 ( 0.00%) 2764478.46 ( -4.34%)
Hmean tput-128 2871713.84 ( 0.00%) 2750136.73 ( -4.23%)
Stddev tput-1 5325.93 ( 0.00%) 2002.53 ( 62.40%)
Stddev tput-8 6630.54 ( 0.00%) 10905.00 ( -64.47%)
Stddev tput-16 25608.58 ( 0.00%) 6851.16 ( 73.25%)
Stddev tput-24 12117.69 ( 0.00%) 4227.79 ( 65.11%)
Stddev tput-32 27577.16 ( 0.00%) 8761.05 ( 68.23%)
Stddev tput-40 59505.86 ( 0.00%) 2048.49 ( 96.56%)
Stddev tput-48 168330.30 ( 0.00%) 93058.08 ( 44.72%)
Stddev tput-56 219540.39 ( 0.00%) 30687.02 ( 86.02%)
Stddev tput-64 121750.35 ( 0.00%) 9617.36 ( 92.10%)
Stddev tput-72 223387.05 ( 0.00%) 34081.13 ( 84.74%)
Stddev tput-80 128198.46 ( 0.00%) 22565.19 ( 82.40%)
Stddev tput-88 136665.36 ( 0.00%) 27905.97 ( 79.58%)
Stddev tput-96 111925.81 ( 0.00%) 99615.79 ( 11.00%)
Stddev tput-104 146455.96 ( 0.00%) 28861.98 ( 80.29%)
Stddev tput-112 88740.49 ( 0.00%) 58288.23 ( 34.32%)
Stddev tput-120 186384.86 ( 0.00%) 45812.03 ( 75.42%)
Stddev tput-128 78761.09 ( 0.00%) 57418.48 ( 27.10%)
Similarly, for embarassingly parallel problems like NPB-ep, there are
improvements due to better spreading across LLC when the machine is not
fully utilised.
vanilla sched-numaimb-v6
Min ep.D 31.79 ( 0.00%) 26.11 ( 17.87%)
Amean ep.D 31.86 ( 0.00%) 26.17 * 17.86%*
Stddev ep.D 0.07 ( 0.00%) 0.05 ( 24.41%)
CoeffVar ep.D 0.22 ( 0.00%) 0.20 ( 7.97%)
Max ep.D 31.93 ( 0.00%) 26.21 ( 17.91%)
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20220208094334.16379-3-mgorman@techsingularity.net
There are inconsistencies when determining if a NUMA imbalance is allowed
that should be corrected.
o allow_numa_imbalance changes types and is not always examining
the destination group so both the type should be corrected as
well as the naming.
o find_idlest_group uses the sched_domain's weight instead of the
group weight which is different to find_busiest_group
o find_busiest_group uses the source group instead of the destination
which is different to task_numa_find_cpu
o Both find_idlest_group and find_busiest_group should account
for the number of running tasks if a move was allowed to be
consistent with task_numa_find_cpu
Fixes: 7d2b5dd0bc ("sched/numa: Allow a floating imbalance between NUMA nodes")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20220208094334.16379-2-mgorman@techsingularity.net
The child processes will inherit numa_pages_migrated and
total_numa_faults from the parent. It means even if there is no numa
fault happen on the child, the statistics in /proc/$pid of the child
process might show huge amount. This is a bit weird. Let's initialize
them when do fork.
Signed-off-by: Honglei Wang <wanghonglei@didichuxing.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/20220113133920.49900-1-wanghonglei@didichuxing.com
Quieten all kernel-doc warnings in kernel/sched/fair.c:
kernel/sched/fair.c:3663: warning: No description found for return value of 'update_cfs_rq_load_avg'
kernel/sched/fair.c:8601: warning: No description found for return value of 'asym_smt_can_pull_tasks'
kernel/sched/fair.c:8673: warning: Function parameter or member 'sds' not described in 'update_sg_lb_stats'
kernel/sched/fair.c:9483: warning: contents before sections
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20211218055900.2704-1-rdunlap@infradead.org
Similarly to util_avg and util_sum, don't sync load_sum with the low
bound of load_avg but only ensure that load_sum stays in the correct range.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Link: https://lkml.kernel.org/r/20220111134659.24961-5-vincent.guittot@linaro.org
Similarly to util_avg and util_sum, don't sync runnable_sum with the low
bound of runnable_avg but only ensure that runnable_sum stays in the
correct range.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Link: https://lkml.kernel.org/r/20220111134659.24961-4-vincent.guittot@linaro.org
Rick reported performance regressions in bugzilla because of cpu frequency
being lower than before:
https://bugzilla.kernel.org/show_bug.cgi?id=215045
He bisected the problem to:
commit 1c35b07e6d ("sched/fair: Ensure _sum and _avg values stay consistent")
This commit forces util_sum to be synced with the new util_avg after
removing the contribution of a task and before the next periodic sync. By
doing so util_sum is rounded to its lower bound and might lost up to
LOAD_AVG_MAX-1 of accumulated contribution which has not yet been
reflected in util_avg.
update_tg_cfs_util() is not the only place where we round util_sum and
lost some accumulated contributions that are not already reflected in
util_avg. Modify update_tg_cfs_util() and detach_entity_load_avg() to not
sync util_sum with the new util_avg. Instead of always setting util_sum to
the low bound of util_avg, which can significantly lower the utilization,
we propagate the difference. In addition, we also check that cfs's util_sum
always stays above the lower bound for a given util_avg as it has been
observed that sched_entity's util_sum is sometimes above cfs one.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Link: https://lkml.kernel.org/r/20220111134659.24961-3-vincent.guittot@linaro.org
Rick reported performance regressions in bugzilla because of cpu frequency
being lower than before:
https://bugzilla.kernel.org/show_bug.cgi?id=215045
He bisected the problem to:
commit 1c35b07e6d ("sched/fair: Ensure _sum and _avg values stay consistent")
This commit forces util_sum to be synced with the new util_avg after
removing the contribution of a task and before the next periodic sync. By
doing so util_sum is rounded to its lower bound and might lost up to
LOAD_AVG_MAX-1 of accumulated contribution which has not yet been
reflected in util_avg.
Instead of always setting util_sum to the low bound of util_avg, which can
significantly lower the utilization of root cfs_rq after propagating the
change down into the hierarchy, we revert the change of util_sum and
propagate the difference.
In addition, we also check that cfs's util_sum always stays above the
lower bound for a given util_avg as it has been observed that
sched_entity's util_sum is sometimes above cfs one.
Fixes: 1c35b07e6d ("sched/fair: Ensure _sum and _avg values stay consistent")
Reported-by: Rick Yiu <rickyiu@google.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Link: https://lkml.kernel.org/r/20220111134659.24961-2-vincent.guittot@linaro.org
cpu_util_cfs() was created by commit d4edd662ac ("sched/cpufreq: Use
the DEADLINE utilization signal") to enable the access to CPU
utilization from the Schedutil CPUfreq governor.
Commit a07630b8b2 ("sched/cpufreq/schedutil: Use util_est for OPP
selection") added util_est support later.
The only thing cpu_util() is doing on top of what cpu_util_cfs() already
does is to clamp the return value to the [0..capacity_orig] capacity
range of the CPU. Integrating this into cpu_util_cfs() is not harming
the existing users (Schedutil and CPUfreq cooling (latter via
sched_cpu_util() wrapper)).
For straightforwardness, prefer to keep using `int cpu` as the function
parameter over using `struct rq *rq` which might avoid some calls to
cpu_rq(cpu) -> per_cpu(runqueues, cpu) -> RELOC_HIDE().
Update cfs_util()'s documentation and reuse it for cpu_util_cfs().
Remove cpu_util().
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20211118164240.623551-1-dietmar.eggemann@arm.com
task_util and capacity are comparable unsigned long values. There is no
need for an intermidiate implicit signed cast.
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211207095755.859972-1-vincent.donnefort@arm.com
All People I know including myself took a long time to figure out that
typical wakeup will always go to fast path and never go to slow path
except WF_FORK and WF_EXEC.
Vincent reminded me once in a linaro meeting and made me understand
slow path won't happen for WF_TTWU. But my other friends repeatedly
wasted a lot of time on testing this path like me before I reminded
them.
So obviously the code needs some document.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211016111109.5559-1-21cnbao@gmail.com
select_idle_sibling() has a special case for tasks woken up by a per-CPU
kthread where the selected CPU is the previous one. For asymmetric CPU
capacity systems, the assumption was that the wakee couldn't have a
bigger utilization during task placement than it used to have during the
last activation. That was not considering uclamp.min which can completely
change between two task activations and as a consequence mandates the
fitness criterion asym_fits_capacity(), even for the exit path described
above.
Fixes: b4c9c9f156 ("sched/fair: Prefer prev cpu in asymmetric wakeup path")
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lkml.kernel.org/r/20211129173115.4006346-1-vincent.donnefort@arm.com
select_idle_sibling() has a special case for tasks woken up by a per-CPU
kthread, where the selected CPU is the previous one. However, the current
condition for this exit path is incomplete. A task can wake up from an
interrupt context (e.g. hrtimer), while a per-CPU kthread is running. A
such scenario would spuriously trigger the special case described above.
Also, a recent change made the idle task like a regular per-CPU kthread,
hence making that situation more likely to happen
(is_per_cpu_kthread(swapper) being true now).
Checking for task context makes sure select_idle_sibling() will not
interpret a wake up from any other context as a wake up by a per-CPU
kthread.
Fixes: 52262ee567 ("sched/fair: Allow a per-CPU kthread waking a task to stack on the same CPU, to fix XFS performance regression")
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lore.kernel.org/r/20211201143450.479472-1-vincent.donnefort@arm.com
Adds accounting for "forced idle" time, which is time where a cookie'd
task forces its SMT sibling to idle, despite the presence of runnable
tasks.
Forced idle time is one means to measure the cost of enabling core
scheduling (ie. the capacity lost due to the need to force idle).
Forced idle time is attributed to the thread responsible for causing
the forced idle.
A few details:
- Forced idle time is displayed via /proc/PID/sched. It also requires
that schedstats is enabled.
- Forced idle is only accounted when a sibling hyperthread is held
idle despite the presence of runnable tasks. No time is charged if
a sibling is idle but has no runnable tasks.
- Tasks with 0 cookie are never charged forced idle.
- For SMT > 2, we scale the amount of forced idle charged based on the
number of forced idle siblings. Additionally, we split the time up and
evenly charge it to all running tasks, as each is equally responsible
for the forced idle.
Signed-off-by: Josh Don <joshdon@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211018203428.2025792-1-joshdon@google.com
Kevin is reporting crashes which point to a use-after-free of a cfs_rq
in update_blocked_averages(). Initial debugging revealed that we've
live cfs_rq's (on_list=1) in an about to be kfree()'d task group in
free_fair_sched_group(). However, it was unclear how that can happen.
His kernel config happened to lead to a layout of struct sched_entity
that put the 'my_q' member directly into the middle of the object
which makes it incidentally overlap with SLUB's freelist pointer.
That, in combination with SLAB_FREELIST_HARDENED's freelist pointer
mangling, leads to a reliable access violation in form of a #GP which
made the UAF fail fast.
Michal seems to have run into the same issue[1]. He already correctly
diagnosed that commit a7b359fc6a ("sched/fair: Correctly insert
cfs_rq's to list on unthrottle") is causing the preconditions for the
UAF to happen by re-adding cfs_rq's also to task groups that have no
more running tasks, i.e. also to dead ones. His analysis, however,
misses the real root cause and it cannot be seen from the crash
backtrace only, as the real offender is tg_unthrottle_up() getting
called via sched_cfs_period_timer() via the timer interrupt at an
inconvenient time.
When unregister_fair_sched_group() unlinks all cfs_rq's from the dying
task group, it doesn't protect itself from getting interrupted. If the
timer interrupt triggers while we iterate over all CPUs or after
unregister_fair_sched_group() has finished but prior to unlinking the
task group, sched_cfs_period_timer() will execute and walk the list of
task groups, trying to unthrottle cfs_rq's, i.e. re-add them to the
dying task group. These will later -- in free_fair_sched_group() -- be
kfree()'ed while still being linked, leading to the fireworks Kevin
and Michal are seeing.
To fix this race, ensure the dying task group gets unlinked first.
However, simply switching the order of unregistering and unlinking the
task group isn't sufficient, as concurrent RCU walkers might still see
it, as can be seen below:
CPU1: CPU2:
: timer IRQ:
: do_sched_cfs_period_timer():
: :
: distribute_cfs_runtime():
: rcu_read_lock();
: :
: unthrottle_cfs_rq():
sched_offline_group(): :
: walk_tg_tree_from(…,tg_unthrottle_up,…):
list_del_rcu(&tg->list); :
(1) : list_for_each_entry_rcu(child, &parent->children, siblings)
: :
(2) list_del_rcu(&tg->siblings); :
: tg_unthrottle_up():
unregister_fair_sched_group(): struct cfs_rq *cfs_rq = tg->cfs_rq[cpu_of(rq)];
: :
list_del_leaf_cfs_rq(tg->cfs_rq[cpu]); :
: :
: if (!cfs_rq_is_decayed(cfs_rq) || cfs_rq->nr_running)
(3) : list_add_leaf_cfs_rq(cfs_rq);
: :
: :
: :
: :
: :
(4) : rcu_read_unlock();
CPU 2 walks the task group list in parallel to sched_offline_group(),
specifically, it'll read the soon to be unlinked task group entry at
(1). Unlinking it on CPU 1 at (2) therefore won't prevent CPU 2 from
still passing it on to tg_unthrottle_up(). CPU 1 now tries to unlink
all cfs_rq's via list_del_leaf_cfs_rq() in
unregister_fair_sched_group(). Meanwhile CPU 2 will re-add some of
these at (3), which is the cause of the UAF later on.
To prevent this additional race from happening, we need to wait until
walk_tg_tree_from() has finished traversing the task groups, i.e.
after the RCU read critical section ends in (4). Afterwards we're safe
to call unregister_fair_sched_group(), as each new walk won't see the
dying task group any more.
On top of that, we need to wait yet another RCU grace period after
unregister_fair_sched_group() to ensure print_cfs_stats(), which might
run concurrently, always sees valid objects, i.e. not already free'd
ones.
This patch survives Michal's reproducer[2] for 8h+ now, which used to
trigger within minutes before.
[1] https://lore.kernel.org/lkml/20211011172236.11223-1-mkoutny@suse.com/
[2] https://lore.kernel.org/lkml/20211102160228.GA57072@blackbody.suse.cz/
Fixes: a7b359fc6a ("sched/fair: Correctly insert cfs_rq's to list on unthrottle")
[peterz: shuffle code around a bit]
Reported-by: Kevin Tanguy <kevin.tanguy@corp.ovh.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
update_next_balance() uses sd->last_balance which is not modified by
load_balance() so we can merge the 2 calls in one place.
No functional change
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/20211019123537.17146-6-vincent.guittot@linaro.org
With a default value of 500us, sysctl_sched_migration_cost is
significanlty higher than the cost of load_balance. Remove the
condition and rely on the sd->max_newidle_lb_cost to abort
newidle_balance.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/20211019123537.17146-5-vincent.guittot@linaro.org
Decay max_newidle_lb_cost only when it has not been updated for a while
and ensure to not decay a recently changed value.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/20211019123537.17146-4-vincent.guittot@linaro.org
In newidle_balance(), the scheduler skips load balance to the new idle cpu
when the 1st sd of this_rq is:
this_rq->avg_idle < sd->max_newidle_lb_cost
Doing a costly call to update_blocked_averages() will not be useful and
simply adds overhead when this condition is true.
Check the condition early in newidle_balance() to skip
update_blocked_averages() when possible.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/20211019123537.17146-3-vincent.guittot@linaro.org
The time spent to update the blocked load can be significant depending of
the complexity fo the cgroup hierarchy. Take this time into account in
the cost of the 1st load balance of a newly idle cpu.
Also reduce the number of call to sched_clock_cpu() and track more actual
work.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/20211019123537.17146-2-vincent.guittot@linaro.org
Fix a few comments to help understand them better.
Signed-off-by: Bharata B Rao <bharata@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lkml.kernel.org/r/20211004105706.3669-4-bharata@amd.com
numa_group::fault_cpus is actually a pointer to the region
in numa_group::faults[] where NUMA_CPU stats are located.
Remove this redundant member and use numa_group::faults[NUMA_CPU]
directly like it is done for similar per-process numa fault stats.
There is no functionality change due to this commit.
Signed-off-by: Bharata B Rao <bharata@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lkml.kernel.org/r/20211004105706.3669-3-bharata@amd.com
While allocating group fault stats, task_numa_group()
is using a hard coded number 4. Replace this by
NR_NUMA_HINT_FAULT_STATS.
No functionality change in this commit.
Signed-off-by: Bharata B Rao <bharata@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lkml.kernel.org/r/20211004105706.3669-2-bharata@amd.com
Since commit 89aafd67f2 ("sched/fair: Use prev instead of new target as recent_used_cpu"),
p->recent_used_cpu is unconditionnaly set with prev.
Fixes: 89aafd67f2 ("sched/fair: Use prev instead of new target as recent_used_cpu")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lkml.kernel.org/r/20210928103544.27489-1-vincent.guittot@linaro.org
When deciding to pull tasks in ASYM_PACKING, it is necessary not only to
check for the idle state of the destination CPU, dst_cpu, but also of
its SMT siblings.
If dst_cpu is idle but its SMT siblings are busy, performance suffers
if it pulls tasks from a medium priority CPU that does not have SMT
siblings.
Implement asym_smt_can_pull_tasks() to inspect the state of the SMT
siblings of both dst_cpu and the CPUs in the candidate busiest group.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Len Brown <len.brown@intel.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210911011819.12184-7-ricardo.neri-calderon@linux.intel.com
Create a separate function, sched_asym(). A subsequent changeset will
introduce logic to deal with SMT in conjunction with asmymmetric
packing. Such logic will need the statistics of the scheduling
group provided as argument. Update them before calling sched_asym().
Co-developed-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Len Brown <len.brown@intel.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210911011819.12184-6-ricardo.neri-calderon@linux.intel.com
Before deciding to pull tasks when using asymmetric packing of tasks,
on some architectures (e.g., x86) it is necessary to know not only the
state of dst_cpu but also of its SMT siblings. The decision to classify
a candidate busiest group as group_asym_packing is done in
update_sg_lb_stats(). Give this function access to the scheduling domain
statistics, which contains the statistics of the local group.
Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Len Brown <len.brown@intel.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210911011819.12184-5-ricardo.neri-calderon@linux.intel.com
sched_asmy_prefer() always returns false when called on the local group. By
checking local_group, we can avoid additional checks and invoking
sched_asmy_prefer() when it is not needed. No functional changes are
introduced.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Len Brown <len.brown@intel.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210911011819.12184-4-ricardo.neri-calderon@linux.intel.com
The original prototype of the schedstats helpers are
update_stats_wait_*(struct cfs_rq *cfs_rq, struct sched_entity *se)
The cfs_rq in these helpers is used to get the rq_clock, and the se is
used to get the struct sched_statistics and the struct task_struct. In
order to make these helpers available by all sched classes, we can pass
the rq, sched_statistics and task_struct directly.
Then the new helpers are
update_stats_wait_*(struct rq *rq, struct task_struct *p,
struct sched_statistics *stats)
which are independent of fair sched class.
To avoid vmlinux growing too large or introducing ovehead when
!schedstat_enabled(), some new helpers after schedstat_enabled() are also
introduced, Suggested by Mel. These helpers are in sched/stats.c,
__update_stats_wait_*(struct rq *rq, struct task_struct *p,
struct sched_statistics *stats)
The size of vmlinux as follows,
Before After
Size of vmlinux 826308552 826304640
The size is a litte smaller as some functions are not inlined again after
the change.
I also compared the sched performance with 'perf bench sched pipe',
suggested by Mel. The result as followsi (in usecs/op),
Before After
kernel.sched_schedstats=0 5.2~5.4 5.2~5.4
kernel.sched_schedstats=1 5.3~5.5 5.3~5.5
[These data is a little difference with the prev version, that is
because my old test machine is destroyed so I have to use a new
different test machine.]
Almost no difference.
No functional change.
[lkp@intel.com: reported build failure in prev version]
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/20210905143547.4668-4-laoar.shao@gmail.com
If we want to use the schedstats facility to trace other sched classes, we
should make it independent of fair sched class. The struct sched_statistics
is the schedular statistics of a task_struct or a task_group. So we can
move it into struct task_struct and struct task_group to achieve the goal.
After the patch, schestats are orgnized as follows,
struct task_struct {
...
struct sched_entity se;
struct sched_rt_entity rt;
struct sched_dl_entity dl;
...
struct sched_statistics stats;
...
};
Regarding the task group, schedstats is only supported for fair group
sched, and a new struct sched_entity_stats is introduced, suggested by
Peter -
struct sched_entity_stats {
struct sched_entity se;
struct sched_statistics stats;
} __no_randomize_layout;
Then with the se in a task_group, we can easily get the stats.
The sched_statistics members may be frequently modified when schedstats is
enabled, in order to avoid impacting on random data which may in the same
cacheline with them, the struct sched_statistics is defined as cacheline
aligned.
As this patch changes the core struct of scheduler, so I verified the
performance it may impact on the scheduler with 'perf bench sched
pipe', suggested by Mel. Below is the result, in which all the values
are in usecs/op.
Before After
kernel.sched_schedstats=0 5.2~5.4 5.2~5.4
kernel.sched_schedstats=1 5.3~5.5 5.3~5.5
[These data is a little difference with the earlier version, that is
because my old test machine is destroyed so I have to use a new
different test machine.]
Almost no impact on the sched performance.
No functional change.
[lkp@intel.com: reported build failure in earlier version]
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/20210905143547.4668-3-laoar.shao@gmail.com
schedstat_enabled() has been already checked, so we can use
__schedstat_set() directly.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/20210905143547.4668-2-laoar.shao@gmail.com
Two new statistics are introduced to show the internal of burst feature
and explain why burst helps or not.
nr_bursts: number of periods bandwidth burst occurs
burst_time: cumulative wall-time (in nanoseconds) that any cpus has
used above quota in respective periods
Co-developed-by: Shanpei Chen <shanpeic@linux.alibaba.com>
Signed-off-by: Shanpei Chen <shanpeic@linux.alibaba.com>
Co-developed-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Huaixin Chang <changhuaixin@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20210830032215.16302-2-changhuaixin@linux.alibaba.com
Give reduced sleeper credit to SCHED_IDLE entities. As a result, woken
SCHED_IDLE entities will take longer to preempt normal entities.
The benefit of this change is to make it less likely that a newly woken
SCHED_IDLE entity will preempt a short-running normal entity before it
blocks.
We still give a small sleeper credit to SCHED_IDLE entities, so that
idle<->idle competition retains some fairness.
Example: With HZ=1000, spawned four threads affined to one cpu, one of
which was set to SCHED_IDLE. Without this patch, wakeup latency for the
SCHED_IDLE thread was ~1-2ms, with the patch the wakeup latency was
~5ms.
Signed-off-by: Josh Don <joshdon@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Link: https://lore.kernel.org/r/20210820010403.946838-5-joshdon@google.com
Use a small, non-scaled min granularity for SCHED_IDLE entities, when
competing with normal entities. This reduces the latency of getting
a normal entity back on cpu, at the expense of increased context
switch frequency of SCHED_IDLE entities.
The benefit of this change is to reduce the round-robin latency for
normal entities when competing with a SCHED_IDLE entity.
Example: on a machine with HZ=1000, spawned two threads, one of which is
SCHED_IDLE, and affined to one cpu. Without this patch, the SCHED_IDLE
thread runs for 4ms then waits for 1.4s. With this patch, it runs for
1ms and waits 340ms (as it round-robins with the other thread).
Signed-off-by: Josh Don <joshdon@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20210820010403.946838-4-joshdon@google.com
Adds cfs_rq->idle_nr_running, which accounts the number of idle entities
directly enqueued on the cfs_rq.
Signed-off-by: Josh Don <joshdon@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20210820010403.946838-3-joshdon@google.com
Consider a system with some NOHZ-idle CPUs, such that
nohz.idle_cpus_mask = S
nohz.next_balance = T
When a new CPU k goes NOHZ idle (nohz_balance_enter_idle()), we end up
with:
nohz.idle_cpus_mask = S \U {k}
nohz.next_balance = T
Note that the nohz.next_balance hasn't changed - it won't be updated until
a NOHZ balance is triggered. This is problematic if the newly NOHZ idle CPU
has an earlier rq.next_balance than the other NOHZ idle CPUs, IOW if:
cpu_rq(k).next_balance < nohz.next_balance
In such scenarios, the existing nohz.next_balance will prevent any NOHZ
balance from happening, which itself will prevent nohz.next_balance from
being updated to this new cpu_rq(k).next_balance. Unnecessary load balance
delays of over 12ms caused by this were observed on an arm64 RB5 board.
Use the new nohz.needs_update flag to mark the presence of newly-idle CPUs
that need their rq->next_balance to be collated into
nohz.next_balance. Trigger a NOHZ_NEXT_KICK when the flag is set.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210823111700.2842997-3-valentin.schneider@arm.com
A following patch will trigger NOHZ idle balances as a means to update
nohz.next_balance. Vincent noted that blocked load updates can have
non-negligible overhead, which should be avoided if the intent is to only
update nohz.next_balance.
Add a new NOHZ balance kick flag, NOHZ_NEXT_KICK. Gate NOHZ blocked load
update by the presence of NOHZ_STATS_KICK - currently all NOHZ balance
kicks will have the NOHZ_STATS_KICK flag set, so no change in behaviour is
expected.
Suggested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210823111700.2842997-2-valentin.schneider@arm.com
Since commit a7b359fc6a ("sched/fair: Correctly insert cfs_rq's to
list on unthrottle") we add cfs_rqs with no runnable tasks but not fully
decayed into the load (leaf) list. We may ignore adding some ancestors
and therefore breaking tmp_alone_branch invariant. This broke LTP test
cfs_bandwidth01 and it was partially fixed in commit fdaba61ef8
("sched/fair: Ensure that the CFS parent is added after unthrottling").
I noticed the named test still fails even with the fix (but with low
probability, 1 in ~1000 executions of the test). The reason is when
bailing out of unthrottle_cfs_rq early, we may miss adding ancestors of
the unthrottled cfs_rq, thus, not joining tmp_alone_branch properly.
Fix this by adding ancestors if we notice the unthrottled cfs_rq was
added to the load list.
Fixes: a7b359fc6a ("sched/fair: Correctly insert cfs_rq's to list on unthrottle")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Odin Ugedal <odin@uged.al>
Link: https://lore.kernel.org/r/20210917153037.11176-1-mkoutny@suse.com
- The biggest change in this cycle is scheduler support for asymmetric
scheduling affinity, to support the execution of legacy 32-bit tasks on
AArch32 systems that also have 64-bit-only CPUs.
Architectures can fill in this functionality by defining their
own task_cpu_possible_mask(p). When this is done, the scheduler will
make sure the task will only be scheduled on CPUs that support it.
(The actual arm64 specific changes are not part of this tree.)
For other architectures there will be no change in functionality.
- Add cgroup SCHED_IDLE support
- Increase node-distance flexibility & delay determining it until a CPU
is brought online. (This enables platforms where node distance isn't
final until the CPU is only.)
- Deadline scheduler enhancements & fixes
- Misc fixes & cleanups.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=VdGE
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- The biggest change in this cycle is scheduler support for asymmetric
scheduling affinity, to support the execution of legacy 32-bit tasks
on AArch32 systems that also have 64-bit-only CPUs.
Architectures can fill in this functionality by defining their own
task_cpu_possible_mask(p). When this is done, the scheduler will make
sure the task will only be scheduled on CPUs that support it.
(The actual arm64 specific changes are not part of this tree.)
For other architectures there will be no change in functionality.
- Add cgroup SCHED_IDLE support
- Increase node-distance flexibility & delay determining it until a CPU
is brought online. (This enables platforms where node distance isn't
final until the CPU is only.)
- Deadline scheduler enhancements & fixes
- Misc fixes & cleanups.
* tag 'sched-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
eventfd: Make signal recursion protection a task bit
sched/fair: Mark tg_is_idle() an inline in the !CONFIG_FAIR_GROUP_SCHED case
sched: Introduce dl_task_check_affinity() to check proposed affinity
sched: Allow task CPU affinity to be restricted on asymmetric systems
sched: Split the guts of sched_setaffinity() into a helper function
sched: Introduce task_struct::user_cpus_ptr to track requested affinity
sched: Reject CPU affinity changes based on task_cpu_possible_mask()
cpuset: Cleanup cpuset_cpus_allowed_fallback() use in select_fallback_rq()
cpuset: Honour task_cpu_possible_mask() in guarantee_online_cpus()
cpuset: Don't use the cpu_possible_mask as a last resort for cgroup v1
sched: Introduce task_cpu_possible_mask() to limit fallback rq selection
sched: Cgroup SCHED_IDLE support
sched/topology: Skip updating masks for non-online nodes
sched: Replace deprecated CPU-hotplug functions.
sched: Skip priority checks with SCHED_FLAG_KEEP_PARAMS
sched: Fix UCLAMP_FLAG_IDLE setting
sched/deadline: Fix missing clock update in migrate_task_rq_dl()
sched/fair: Avoid a second scan of target in select_idle_cpu
sched/fair: Use prev instead of new target as recent_used_cpu
sched: Don't report SCHED_FLAG_SUGOV in sched_getattr()
...
It's not actually used in the !CONFIG_FAIR_GROUP_SCHED case:
kernel/sched/fair.c:488:12: warning: ‘tg_is_idle’ defined but not used [-Wunused-function]
Keep around a placeholder nevertheless, for API completeness. Mark it inline,
so the compiler doesn't think it must be used.
Fixes: 304000390f: ("sched: Cgroup SCHED_IDLE support")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Josh Don <joshdon@google.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
This extends SCHED_IDLE to cgroups.
Interface: cgroup/cpu.idle.
0: default behavior
1: SCHED_IDLE
Extending SCHED_IDLE to cgroups means that we incorporate the existing
aspects of SCHED_IDLE; a SCHED_IDLE cgroup will count all of its
descendant threads towards the idle_h_nr_running count of all of its
ancestor cgroups. Thus, sched_idle_rq() will work properly.
Additionally, SCHED_IDLE cgroups are configured with minimum weight.
There are two key differences between the per-task and per-cgroup
SCHED_IDLE interface:
- The cgroup interface allows tasks within a SCHED_IDLE hierarchy to
maintain their relative weights. The entity that is "idle" is the
cgroup, not the tasks themselves.
- Since the idle entity is the cgroup, our SCHED_IDLE wakeup preemption
decision is not made by comparing the current task with the woken
task, but rather by comparing their matching sched_entity.
A typical use-case for this is a user that creates an idle and a
non-idle subtree. The non-idle subtree will dominate competition vs
the idle subtree, but the idle subtree will still be high priority vs
other users on the system. The latter is accomplished via comparing
matching sched_entity in the waken preemption path (this could also be
improved by making the sched_idle_rq() decision dependent on the
perspective of a specific task).
For now, we maintain the existing SCHED_IDLE semantics. Future patches
may make improvements that extend how we treat SCHED_IDLE entities.
The per-task_group idle field is an integer that currently only holds
either a 0 or a 1. This is explicitly typed as an integer to allow for
further extensions to this API. For example, a negative value may
indicate a highly latency-sensitive cgroup that should be preferred
for preemption/placement/etc.
Signed-off-by: Josh Don <joshdon@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20210730020019.1487127-2-joshdon@google.com
When select_idle_cpu starts scanning for an idle CPU, it starts with
a target CPU that has already been checked by select_idle_sibling.
This patch starts with the next CPU instead.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210804115857.6253-3-mgorman@techsingularity.net
After select_idle_sibling, p->recent_used_cpu is set to the
new target. However on the next wakeup, prev will be the same as
recent_used_cpu unless the load balancer has moved the task since the
last wakeup. It still works, but is less efficient than it could be.
This patch preserves recent_used_cpu for longer.
The impact on SIS efficiency is tiny so the SIS statistic patches were
used to track the hit rate for using recent_used_cpu. With perf bench
pipe on a 2-socket Cascadelake machine, the hit rate went from 57.14%
to 85.32%. For more intensive wakeup loads like hackbench, the hit rate
is almost negligible but rose from 0.21% to 6.64%. For scaling loads
like tbench, the hit rate goes from almost 0% to 25.42% overall. Broadly
speaking, on tbench, the success rate is much higher for lower thread
counts and drops to almost 0 as the workload scales to towards saturation.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210804115857.6253-2-mgorman@techsingularity.net
Use the loop variable instead of the function argument to test the
other SMT siblings for idle.
Fixes: ff7db0bf24 ("sched/numa: Prefer using an idle CPU as a migration target instead of comparing tasks")
Signed-off-by: Mika Penttilä <mika.penttila@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Link: https://lkml.kernel.org/r/20210722063946.28951-1-mika.penttila@gmail.com
The time remaining until expiry of the refresh_timer can be negative.
Casting the type to an unsigned 64-bit value will cause integer
underflow, making the runtime_refresh_within return false instead of
true. These situations are rare, but they do happen.
This does not cause user-facing issues or errors; other than
possibly unthrottling cfs_rq's using runtime from the previous period(s),
making the CFS bandwidth enforcement less strict in those (special)
situations.
Signed-off-by: Odin Ugedal <odin@uged.al>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Link: https://lore.kernel.org/r/20210629121452.18429-1-odin@uged.al
commit 9e077b52d8 ("sched/pelt: Check that *_avg are null when *_sum are")
reported some inconsitencies between *_avg and *_sum.
commit 1c35b07e6d ("sched/fair: Ensure _sum and _avg values stay consistent")
fixed some but one remains when dequeuing load.
sync the cfs's load_sum with its load_avg after dequeuing the load of a
sched_entity.
Fixes: 9e077b52d8 ("sched/pelt: Check that *_avg are null when *_sum are")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Odin Ugedal <odin@uged.al>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20210701171837.32156-1-vincent.guittot@linaro.org
new warning that several people reported.
- Flip CONFIG_SCHED_CORE to default-disabled, and update the
Kconfig help text.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Jgwc
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2021-06-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix a small inconsistency (bug) in load tracking, caught by a new
warning that several people reported.
- Flip CONFIG_SCHED_CORE to default-disabled, and update the Kconfig
help text.
* tag 'sched-urgent-2021-06-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Disable CONFIG_SCHED_CORE by default
sched/fair: Ensure _sum and _avg values stay consistent
- Changes to core scheduling facilities:
- Add "Core Scheduling" via CONFIG_SCHED_CORE=y, which enables
coordinated scheduling across SMT siblings. This is a much
requested feature for cloud computing platforms, to allow
the flexible utilization of SMT siblings, without exposing
untrusted domains to information leaks & side channels, plus
to ensure more deterministic computing performance on SMT
systems used by heterogenous workloads.
There's new prctls to set core scheduling groups, which
allows more flexible management of workloads that can share
siblings.
- Fix task->state access anti-patterns that may result in missed
wakeups and rename it to ->__state in the process to catch new
abuses.
- Load-balancing changes:
- Tweak newidle_balance for fair-sched, to improve
'memcache'-like workloads.
- "Age" (decay) average idle time, to better track & improve workloads
such as 'tbench'.
- Fix & improve energy-aware (EAS) balancing logic & metrics.
- Fix & improve the uclamp metrics.
- Fix task migration (taskset) corner case on !CONFIG_CPUSET.
- Fix RT and deadline utilization tracking across policy changes
- Introduce a "burstable" CFS controller via cgroups, which allows
bursty CPU-bound workloads to borrow a bit against their future
quota to improve overall latencies & batching. Can be tweaked
via /sys/fs/cgroup/cpu/<X>/cpu.cfs_burst_us.
- Rework assymetric topology/capacity detection & handling.
- Scheduler statistics & tooling:
- Disable delayacct by default, but add a sysctl to enable
it at runtime if tooling needs it. Use static keys and
other optimizations to make it more palatable.
- Use sched_clock() in delayacct, instead of ktime_get_ns().
- Misc cleanups and fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=3VDr
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler udpates from Ingo Molnar:
- Changes to core scheduling facilities:
- Add "Core Scheduling" via CONFIG_SCHED_CORE=y, which enables
coordinated scheduling across SMT siblings. This is a much
requested feature for cloud computing platforms, to allow the
flexible utilization of SMT siblings, without exposing untrusted
domains to information leaks & side channels, plus to ensure more
deterministic computing performance on SMT systems used by
heterogenous workloads.
There are new prctls to set core scheduling groups, which allows
more flexible management of workloads that can share siblings.
- Fix task->state access anti-patterns that may result in missed
wakeups and rename it to ->__state in the process to catch new
abuses.
- Load-balancing changes:
- Tweak newidle_balance for fair-sched, to improve 'memcache'-like
workloads.
- "Age" (decay) average idle time, to better track & improve
workloads such as 'tbench'.
- Fix & improve energy-aware (EAS) balancing logic & metrics.
- Fix & improve the uclamp metrics.
- Fix task migration (taskset) corner case on !CONFIG_CPUSET.
- Fix RT and deadline utilization tracking across policy changes
- Introduce a "burstable" CFS controller via cgroups, which allows
bursty CPU-bound workloads to borrow a bit against their future
quota to improve overall latencies & batching. Can be tweaked via
/sys/fs/cgroup/cpu/<X>/cpu.cfs_burst_us.
- Rework assymetric topology/capacity detection & handling.
- Scheduler statistics & tooling:
- Disable delayacct by default, but add a sysctl to enable it at
runtime if tooling needs it. Use static keys and other
optimizations to make it more palatable.
- Use sched_clock() in delayacct, instead of ktime_get_ns().
- Misc cleanups and fixes.
* tag 'sched-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
sched/doc: Update the CPU capacity asymmetry bits
sched/topology: Rework CPU capacity asymmetry detection
sched/core: Introduce SD_ASYM_CPUCAPACITY_FULL sched_domain flag
psi: Fix race between psi_trigger_create/destroy
sched/fair: Introduce the burstable CFS controller
sched/uclamp: Fix uclamp_tg_restrict()
sched/rt: Fix Deadline utilization tracking during policy change
sched/rt: Fix RT utilization tracking during policy change
sched: Change task_struct::state
sched,arch: Remove unused TASK_STATE offsets
sched,timer: Use __set_current_state()
sched: Add get_current_state()
sched,perf,kvm: Fix preemption condition
sched: Introduce task_is_running()
sched: Unbreak wakeups
sched/fair: Age the average idle time
sched/cpufreq: Consider reduced CPU capacity in energy calculation
sched/fair: Take thermal pressure into account while estimating energy
thermal/cpufreq_cooling: Update offline CPUs per-cpu thermal_pressure
sched/fair: Return early from update_tg_cfs_load() if delta == 0
...
On a 128 cores AMD machine, there are 8 cores in nohz_full mode, and
the others are used for housekeeping. When many housekeeping cpus are
in idle state, we can observe huge time burn in the loop for searching
nearest busy housekeeper cpu by ftrace.
9) | get_nohz_timer_target() {
9) | housekeeping_test_cpu() {
9) 0.390 us | housekeeping_get_mask.part.1();
9) 0.561 us | }
9) 0.090 us | __rcu_read_lock();
9) 0.090 us | housekeeping_cpumask();
9) 0.521 us | housekeeping_cpumask();
9) 0.140 us | housekeeping_cpumask();
...
9) 0.500 us | housekeeping_cpumask();
9) | housekeeping_any_cpu() {
9) 0.090 us | housekeeping_get_mask.part.1();
9) 0.100 us | sched_numa_find_closest();
9) 0.491 us | }
9) 0.100 us | __rcu_read_unlock();
9) + 76.163 us | }
for_each_cpu_and() is a micro function, so in get_nohz_timer_target()
function the
for_each_cpu_and(i, sched_domain_span(sd),
housekeeping_cpumask(HK_FLAG_TIMER))
equals to below:
for (i = -1; i = cpumask_next_and(i, sched_domain_span(sd),
housekeeping_cpumask(HK_FLAG_TIMER)), i < nr_cpu_ids;)
That will cause that housekeeping_cpumask() will be invoked many times.
The housekeeping_cpumask() function returns a const value, so it is
unnecessary to invoke it every time. This patch can minimize the worst
searching time from ~76us to ~16us in my testing.
Similarly, the find_new_ilb() function has the same problem.
Co-developed-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Yuan ZhaoXiong <yuanzhaoxiong@baidu.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1622985115-51007-1-git-send-email-yuanzhaoxiong@baidu.com
The _sum and _avg values are in general sync together with the PELT
divider. They are however not always completely in perfect sync,
resulting in situations where _sum gets to zero while _avg stays
positive. Such situations are undesirable.
This comes from the fact that PELT will increase period_contrib, also
increasing the PELT divider, without updating _sum and _avg values to
stay in perfect sync where (_sum == _avg * divider). However, such PELT
change will never lower _sum, making it impossible to end up in a
situation where _sum is zero and _avg is not.
Therefore, we need to ensure that when subtracting load outside PELT,
that when _sum is zero, _avg is also set to zero. This occurs when
(_sum < _avg * divider), and the subtracted (_avg * divider) is bigger
or equal to the current _sum, while the subtracted _avg is smaller than
the current _avg.
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Odin Ugedal <odin@uged.al>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20210624111815.57937-1-odin@uged.al
The CFS bandwidth controller limits CPU requests of a task group to
quota during each period. However, parallel workloads might be bursty
so that they get throttled even when their average utilization is under
quota. And they are latency sensitive at the same time so that
throttling them is undesired.
We borrow time now against our future underrun, at the cost of increased
interference against the other system users. All nicely bounded.
Traditional (UP-EDF) bandwidth control is something like:
(U = \Sum u_i) <= 1
This guaranteeds both that every deadline is met and that the system is
stable. After all, if U were > 1, then for every second of walltime,
we'd have to run more than a second of program time, and obviously miss
our deadline, but the next deadline will be further out still, there is
never time to catch up, unbounded fail.
This work observes that a workload doesn't always executes the full
quota; this enables one to describe u_i as a statistical distribution.
For example, have u_i = {x,e}_i, where x is the p(95) and x+e p(100)
(the traditional WCET). This effectively allows u to be smaller,
increasing the efficiency (we can pack more tasks in the system), but at
the cost of missing deadlines when all the odds line up. However, it
does maintain stability, since every overrun must be paired with an
underrun as long as our x is above the average.
That is, suppose we have 2 tasks, both specify a p(95) value, then we
have a p(95)*p(95) = 90.25% chance both tasks are within their quota and
everything is good. At the same time we have a p(5)p(5) = 0.25% chance
both tasks will exceed their quota at the same time (guaranteed deadline
fail). Somewhere in between there's a threshold where one exceeds and
the other doesn't underrun enough to compensate; this depends on the
specific CDFs.
At the same time, we can say that the worst case deadline miss, will be
\Sum e_i; that is, there is a bounded tardiness (under the assumption
that x+e is indeed WCET).
The benefit of burst is seen when testing with schbench. Default value of
kernel.sched_cfs_bandwidth_slice_us(5ms) and CONFIG_HZ(1000) is used.
mkdir /sys/fs/cgroup/cpu/test
echo $$ > /sys/fs/cgroup/cpu/test/cgroup.procs
echo 100000 > /sys/fs/cgroup/cpu/test/cpu.cfs_quota_us
echo 100000 > /sys/fs/cgroup/cpu/test/cpu.cfs_burst_us
./schbench -m 1 -t 3 -r 20 -c 80000 -R 10
The average CPU usage is at 80%. I run this for 10 times, and got long tail
latency for 6 times and got throttled for 8 times.
Tail latencies are shown below, and it wasn't the worst case.
Latency percentiles (usec)
50.0000th: 19872
75.0000th: 21344
90.0000th: 22176
95.0000th: 22496
*99.0000th: 22752
99.5000th: 22752
99.9000th: 22752
min=0, max=22727
rps: 9.90 p95 (usec) 22496 p99 (usec) 22752 p95/cputime 28.12% p99/cputime 28.44%
The interferenece when using burst is valued by the possibilities for
missing the deadline and the average WCET. Test results showed that when
there many cgroups or CPU is under utilized, the interference is
limited. More details are shown in:
https://lore.kernel.org/lkml/5371BD36-55AE-4F71-B9D7-B86DC32E3D2B@linux.alibaba.com/
Co-developed-by: Shanpei Chen <shanpeic@linux.alibaba.com>
Signed-off-by: Shanpei Chen <shanpeic@linux.alibaba.com>
Co-developed-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Huaixin Chang <changhuaixin@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20210621092800.23714-2-changhuaixin@linux.alibaba.com
Ensure that a CFS parent will be in the list whenever one of its children is also
in the list.
A warning on rq->tmp_alone_branch != &rq->leaf_cfs_rq_list has been
reported while running LTP test cfs_bandwidth01.
Odin Ugedal found the root cause:
$ tree /sys/fs/cgroup/ltp/ -d --charset=ascii
/sys/fs/cgroup/ltp/
|-- drain
`-- test-6851
`-- level2
|-- level3a
| |-- worker1
| `-- worker2
`-- level3b
`-- worker3
Timeline (ish):
- worker3 gets throttled
- level3b is decayed, since it has no more load
- level2 get throttled
- worker3 get unthrottled
- level2 get unthrottled
- worker3 is added to list
- level3b is not added to list, since nr_running==0 and is decayed
[ Vincent Guittot: Rebased and updated to fix for the reported warning. ]
Fixes: a7b359fc6a ("sched/fair: Correctly insert cfs_rq's to list on unthrottle")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Suggested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Acked-by: Odin Ugedal <odin@uged.al>
Link: https://lore.kernel.org/r/20210621174330.11258-1-vincent.guittot@linaro.org
Change the type and name of task_struct::state. Drop the volatile and
shrink it to an 'unsigned int'. Rename it in order to find all uses
such that we can use READ_ONCE/WRITE_ONCE as appropriate.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20210611082838.550736351@infradead.org
This commit in sched/urgent moved the cfs_rq_is_decayed() function:
a7b359fc6a: ("sched/fair: Correctly insert cfs_rq's to list on unthrottle")
and this fresh commit in sched/core modified it in the old location:
9e077b52d8: ("sched/pelt: Check that *_avg are null when *_sum are")
Merge the two variants.
Conflicts:
kernel/sched/fair.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is a partial forward-port of Peter Ziljstra's work first posted
at:
https://lore.kernel.org/lkml/20180530142236.667774973@infradead.org/
Currently select_idle_cpu()'s proportional scheme uses the average idle
time *for when we are idle*, that is temporally challenged. When a CPU
is not at all idle, we'll happily continue using whatever value we did
see when the CPU goes idle. To fix this, introduce a separate average
idle and age it (the existing value still makes sense for things like
new-idle balancing, which happens when we do go idle).
The overall goal is to not spend more time scanning for idle CPUs than
we're idle for. Otherwise we're inhibiting work. This means that we need to
consider the cost over all the wake-ups between consecutive idle periods.
To track this, the scan cost is subtracted from the estimated average
idle time.
The impact of this patch is related to workloads that have domains that
are fully busy or overloaded. Without the patch, the scan depth may be
too high because a CPU is not reaching idle.
Due to the nature of the patch, this is a regression magnet. It
potentially wins when domains are almost fully busy or overloaded --
at that point searches are likely to fail but idle is not being aged
as CPUs are active so search depth is too large and useless. It will
potentially show regressions when there are idle CPUs and a deep search is
beneficial. This tbench result on a 2-socket broadwell machine partially
illustates the problem
5.13.0-rc2 5.13.0-rc2
vanilla sched-avgidle-v1r5
Hmean 1 445.02 ( 0.00%) 451.36 * 1.42%*
Hmean 2 830.69 ( 0.00%) 846.03 * 1.85%*
Hmean 4 1350.80 ( 0.00%) 1505.56 * 11.46%*
Hmean 8 2888.88 ( 0.00%) 2586.40 * -10.47%*
Hmean 16 5248.18 ( 0.00%) 5305.26 * 1.09%*
Hmean 32 8914.03 ( 0.00%) 9191.35 * 3.11%*
Hmean 64 10663.10 ( 0.00%) 10192.65 * -4.41%*
Hmean 128 18043.89 ( 0.00%) 18478.92 * 2.41%*
Hmean 256 16530.89 ( 0.00%) 17637.16 * 6.69%*
Hmean 320 16451.13 ( 0.00%) 17270.97 * 4.98%*
Note that 8 was a regression point where a deeper search would have helped
but it gains for high thread counts when searches are useless. Hackbench
is a more extreme example although not perfect as the tasks idle rapidly
hackbench-process-pipes
5.13.0-rc2 5.13.0-rc2
vanilla sched-avgidle-v1r5
Amean 1 0.3950 ( 0.00%) 0.3887 ( 1.60%)
Amean 4 0.9450 ( 0.00%) 0.9677 ( -2.40%)
Amean 7 1.4737 ( 0.00%) 1.4890 ( -1.04%)
Amean 12 2.3507 ( 0.00%) 2.3360 * 0.62%*
Amean 21 4.0807 ( 0.00%) 4.0993 * -0.46%*
Amean 30 5.6820 ( 0.00%) 5.7510 * -1.21%*
Amean 48 8.7913 ( 0.00%) 8.7383 ( 0.60%)
Amean 79 14.3880 ( 0.00%) 13.9343 * 3.15%*
Amean 110 21.2233 ( 0.00%) 19.4263 * 8.47%*
Amean 141 28.2930 ( 0.00%) 25.1003 * 11.28%*
Amean 172 34.7570 ( 0.00%) 30.7527 * 11.52%*
Amean 203 41.0083 ( 0.00%) 36.4267 * 11.17%*
Amean 234 47.7133 ( 0.00%) 42.0623 * 11.84%*
Amean 265 53.0353 ( 0.00%) 47.7720 * 9.92%*
Amean 296 60.0170 ( 0.00%) 53.4273 * 10.98%*
Stddev 1 0.0052 ( 0.00%) 0.0025 ( 51.57%)
Stddev 4 0.0357 ( 0.00%) 0.0370 ( -3.75%)
Stddev 7 0.0190 ( 0.00%) 0.0298 ( -56.64%)
Stddev 12 0.0064 ( 0.00%) 0.0095 ( -48.38%)
Stddev 21 0.0065 ( 0.00%) 0.0097 ( -49.28%)
Stddev 30 0.0185 ( 0.00%) 0.0295 ( -59.54%)
Stddev 48 0.0559 ( 0.00%) 0.0168 ( 69.92%)
Stddev 79 0.1559 ( 0.00%) 0.0278 ( 82.17%)
Stddev 110 1.1728 ( 0.00%) 0.0532 ( 95.47%)
Stddev 141 0.7867 ( 0.00%) 0.0968 ( 87.69%)
Stddev 172 1.0255 ( 0.00%) 0.0420 ( 95.91%)
Stddev 203 0.8106 ( 0.00%) 0.1384 ( 82.92%)
Stddev 234 1.1949 ( 0.00%) 0.1328 ( 88.89%)
Stddev 265 0.9231 ( 0.00%) 0.0820 ( 91.11%)
Stddev 296 1.0456 ( 0.00%) 0.1327 ( 87.31%)
Again, higher thread counts benefit and the standard deviation
shows that results are also a lot more stable when the idle
time is aged.
The patch potentially matters when a socket was multiple LLCs as the
maximum search depth is lower. However, some of the test results were
suspiciously good (e.g. specjbb2005 gaining 50% on a Zen1 machine) and
other results were not dramatically different to other mcahines.
Given the nature of the patch, Peter's full series is not being forward
ported as each part should stand on its own. Preferably they would be
merged at different times to reduce the risk of false bisections.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210615111611.GH30378@techsingularity.net
Energy Aware Scheduling (EAS) needs to predict the decisions made by
SchedUtil. The map_util_freq() exists to do that.
There are corner cases where the max allowed frequency might be reduced
(due to thermal). SchedUtil as a CPUFreq governor, is aware of that
but EAS is not. This patch aims to address it.
SchedUtil stores the maximum allowed frequency in
'sugov_policy::next_freq' field. EAS has to predict that value, which is
the real used frequency. That value is made after a call to
cpufreq_driver_resolve_freq() which clamps to the CPUFreq policy limits.
In the existing code EAS is not able to predict that real frequency.
This leads to energy estimation errors.
To avoid wrong energy estimation in EAS (due to frequency miss prediction)
make sure that the step which calculates Performance Domain frequency,
is also aware of the allowed CPU capacity.
Furthermore, modify map_util_freq() to not extend the frequency value.
Instead, use map_util_perf() to extend the util value in both places:
SchedUtil and EAS, but for EAS clamp it to max allowed CPU capacity.
In the end, we achieve the same desirable behavior for both subsystems
and alignment in regards to the real CPU frequency.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> (For the schedutil part)
Link: https://lore.kernel.org/r/20210614191238.23224-1-lukasz.luba@arm.com
Energy Aware Scheduling (EAS) needs to be able to predict the frequency
requests made by the SchedUtil governor to properly estimate energy used
in the future. It has to take into account CPUs utilization and forecast
Performance Domain (PD) frequency. There is a corner case when the max
allowed frequency might be reduced due to thermal. SchedUtil is aware of
that reduced frequency, so it should be taken into account also in EAS
estimations.
SchedUtil, as a CPUFreq governor, knows the maximum allowed frequency of
a CPU, thanks to cpufreq_driver_resolve_freq() and internal clamping
to 'policy::max'. SchedUtil is responsible to respect that upper limit
while setting the frequency through CPUFreq drivers. This effective
frequency is stored internally in 'sugov_policy::next_freq' and EAS has
to predict that value.
In the existing code the raw value of arch_scale_cpu_capacity() is used
for clamping the returned CPU utilization from effective_cpu_util().
This patch fixes issue with too big single CPU utilization, by introducing
clamping to the allowed CPU capacity. The allowed CPU capacity is a CPU
capacity reduced by thermal pressure raw value.
Thanks to knowledge about allowed CPU capacity, we don't get too big value
for a single CPU utilization, which is then added to the util sum. The
util sum is used as a source of information for estimating whole PD energy.
To avoid wrong energy estimation in EAS (due to capped frequency), make
sure that the calculation of util sum is aware of allowed CPU capacity.
This thermal pressure might be visible in scenarios where the CPUs are not
heavily loaded, but some other component (like GPU) drastically reduced
available power budget and increased the SoC temperature. Thus, we still
use EAS for task placement and CPUs are not over-utilized.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20210614191128.22735-1-lukasz.luba@arm.com
In case the _avg delta is 0 there is no need to update se's _avg
(level n) nor cfs_rq's _avg (level n-1). These values stay the same.
Since cfs_rq's _avg isn't changed, i.e. no load is propagated down,
cfs_rq's _sum should stay the same as well.
So bail out after se's _sum has been updated.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20210601083616.804229-1-dietmar.eggemann@arm.com
Check that we never break the rule that pelt's avg values are null if
pelt's sum are.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Odin Ugedal <odin@uged.al>
Link: https://lore.kernel.org/r/20210601155328.19487-1-vincent.guittot@linaro.org
Fix an issue where fairness is decreased since cfs_rq's can end up not
being decayed properly. For two sibling control groups with the same
priority, this can often lead to a load ratio of 99/1 (!!).
This happens because when a cfs_rq is throttled, all the descendant
cfs_rq's will be removed from the leaf list. When they initial cfs_rq
is unthrottled, it will currently only re add descendant cfs_rq's if
they have one or more entities enqueued. This is not a perfect
heuristic.
Instead, we insert all cfs_rq's that contain one or more enqueued
entities, or it its load is not completely decayed.
Can often lead to situations like this for equally weighted control
groups:
$ ps u -C stress
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 10009 88.8 0.0 3676 100 pts/1 R+ 11:04 0:13 stress --cpu 1
root 10023 3.0 0.0 3676 104 pts/1 R+ 11:04 0:00 stress --cpu 1
Fixes: 31bc6aeaab ("sched/fair: Optimize update_blocked_averages()")
[vingo: !SMP build fix]
Signed-off-by: Odin Ugedal <odin@uged.al>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20210612112815.61678-1-odin@uged.al
The util_est internal UTIL_AVG_UNCHANGED flag which is used to prevent
unnecessary util_est updates uses the LSB of util_est.enqueued. It is
exposed via _task_util_est() (and task_util_est()).
Commit 92a801e5d5 ("sched/fair: Mask UTIL_AVG_UNCHANGED usages")
mentions that the LSB is lost for util_est resolution but
find_energy_efficient_cpu() checks if task_util_est() returns 0 to
return prev_cpu early.
_task_util_est() returns the max value of util_est.ewma and
util_est.enqueued or'ed w/ UTIL_AVG_UNCHANGED.
So task_util_est() returning the max of task_util() and
_task_util_est() will never return 0 under the default
SCHED_FEAT(UTIL_EST, true).
To fix this use the MSB of util_est.enqueued instead and keep the flag
util_est internal, i.e. don't export it via _task_util_est().
The maximal possible util_avg value for a task is 1024 so the MSB of
'unsigned int util_est.enqueued' isn't used to store a util value.
As a caveat the code behind the util_est_se trace point has to filter
UTIL_AVG_UNCHANGED to see the real util_est.enqueued value which should
be easy to do.
This also fixes an issue report by Xuewen Yan that util_est_update()
only used UTIL_AVG_UNCHANGED for the subtrahend of the equation:
last_enqueued_diff = ue.enqueued - (task_util() | UTIL_AVG_UNCHANGED)
Fixes: b89997aa88 sched/pelt: Fix task util_est update filtering
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Xuewen Yan <xuewen.yan@unisoc.com>
Reviewed-by: Vincent Donnefort <vincent.donnefort@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20210602145808.1562603-1-dietmar.eggemann@arm.com
Rounding in PELT calculation happening when entities are attached/detached
of a cfs_rq can result into situations where util/runnable_avg is not null
but util/runnable_sum is. This is normally not possible so we need to
ensure that util/runnable_sum stays synced with util/runnable_avg.
detach_entity_load_avg() is the last place where we don't sync
util/runnable_sum with util/runnbale_avg when moving some sched_entities
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210601085832.12626-1-vincent.guittot@linaro.org
When using something other than 8 spaces per tab, this ascii art
makes not sense, and the reader might end up wondering what this
advanced equation "is".
Signed-off-by: Odin Ugedal <odin@uged.al>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210518125202.78658-4-odin@uged.al
During the update of fair blocked load (__update_blocked_fair()), we
update the contribution of the cfs in tg->load_avg if cfs_rq's pelt
has decayed. Nevertheless, the pelt values of a cfs_rq could have
been recently updated while propagating the change of a child. In this
case, cfs_rq's pelt will not decayed because it has already been
updated and we don't update tg->load_avg.
__update_blocked_fair
...
for_each_leaf_cfs_rq_safe: child cfs_rq
update cfs_rq_load_avg() for child cfs_rq
...
update_load_avg(cfs_rq_of(se), se, 0)
...
update cfs_rq_load_avg() for parent cfs_rq
-propagation of child's load makes parent cfs_rq->load_sum
becoming null
-UPDATE_TG is not set so it doesn't update parent
cfs_rq->tg_load_avg_contrib
..
for_each_leaf_cfs_rq_safe: parent cfs_rq
update cfs_rq_load_avg() for parent cfs_rq
- nothing to do because parent cfs_rq has already been updated
recently so cfs_rq->tg_load_avg_contrib is not updated
...
parent cfs_rq is decayed
list_del_leaf_cfs_rq parent cfs_rq
- but it still contibutes to tg->load_avg
we must set UPDATE_TG flags when propagting pending load to the parent
Fixes: 039ae8bcf7 ("sched/fair: Fix O(nr_cgroups) in the load balancing path")
Reported-by: Odin Ugedal <odin@uged.al>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Odin Ugedal <odin@uged.al>
Link: https://lkml.kernel.org/r/20210527122916.27683-3-vincent.guittot@linaro.org
when removing a cfs_rq from the list we only check _sum value so we must
ensure that _avg and _sum stay synced so load_sum can't be null whereas
load_avg is not after propagating load in the cgroup hierarchy.
Use load_avg to compute load_sum similarly to what is done for util_sum
and runnable_sum.
Fixes: 0e2d2aaaae ("sched/fair: Rewrite PELT migration propagation")
Reported-by: Odin Ugedal <odin@uged.al>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Odin Ugedal <odin@uged.al>
Link: https://lkml.kernel.org/r/20210527122916.27683-2-vincent.guittot@linaro.org
- Don't migrate if there is a cookie mismatch
Load balance tries to move task from busiest CPU to the
destination CPU. When core scheduling is enabled, if the
task's cookie does not match with the destination CPU's
core cookie, this task may be skipped by this CPU. This
mitigates the forced idle time on the destination CPU.
- Select cookie matched idle CPU
In the fast path of task wakeup, select the first cookie matched
idle CPU instead of the first idle CPU.
- Find cookie matched idlest CPU
In the slow path of task wakeup, find the idlest CPU whose core
cookie matches with task's cookie
Signed-off-by: Aubrey Li <aubrey.li@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Don Hiatt <dhiatt@digitalocean.com>
Tested-by: Hongyu Ning <hongyu.ning@linux.intel.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210422123308.860083871@infradead.org
During force-idle, we end up doing cross-cpu comparison of vruntimes
during pick_next_task. If we simply compare (vruntime-min_vruntime)
across CPUs, and if the CPUs only have 1 task each, we will always
end up comparing 0 with 0 and pick just one of the tasks all the time.
This starves the task that was not picked. To fix this, take a snapshot
of the min_vruntime when entering force idle and use it for comparison.
This min_vruntime snapshot will only be used for cross-CPU vruntime
comparison, and nothing else.
A note about the min_vruntime snapshot and force idling:
During selection:
When we're not fi, we need to update snapshot.
when we're fi and we were not fi, we must update snapshot.
When we're fi and we were already fi, we must not update snapshot.
Which gives:
fib fi update
0 0 1
0 1 1
1 0 1
1 1 0
Where:
fi: force-idled now
fib: force-idled before
So the min_vruntime snapshot needs to be updated when: !(fib && fi).
Also, the cfs_prio_less() function needs to be aware of whether the
core is in force idle or not, since it will be use this information to
know whether to advance a cfs_rq's min_vruntime_fi in the hierarchy.
So pass this information along via pick_task() -> prio_less().
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Don Hiatt <dhiatt@digitalocean.com>
Tested-by: Hongyu Ning <hongyu.ning@linux.intel.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210422123308.738542617@infradead.org
If there is only one long running local task and the sibling is
forced idle, it might not get a chance to run until a schedule
event happens on any cpu in the core.
So we check for this condition during a tick to see if a sibling
is starved and then give it a chance to schedule.
Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Don Hiatt <dhiatt@digitalocean.com>
Tested-by: Hongyu Ning <hongyu.ning@linux.intel.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210422123308.617407840@infradead.org
Introduce task_struct::core_cookie as an opaque identifier for core
scheduling. When enabled; core scheduling will only allow matching
task to be on the core; where idle matches everything.
When task_struct::core_cookie is set (and core scheduling is enabled)
these tasks are indexed in a second RB-tree, first on cookie value
then on scheduling function, such that matching task selection always
finds the most elegible match.
NOTE: *shudder* at the overhead...
NOTE: *sigh*, a 3rd copy of the scheduling function; the alternative
is per class tracking of cookies and that just duplicates a lot of
stuff for no raisin (the 2nd copy lives in the rt-mutex PI code).
[Joel: folded fixes]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Don Hiatt <dhiatt@digitalocean.com>
Tested-by: Hongyu Ning <hongyu.ning@linux.intel.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210422123308.496975854@infradead.org
Because sched_class::pick_next_task() also implies
sched_class::set_next_task() (and possibly put_prev_task() and
newidle_balance) it is not state invariant. This makes it unsuitable
for remote task selection.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
[Vineeth: folded fixes]
Signed-off-by: Vineeth Remanan Pillai <viremana@linux.microsoft.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Don Hiatt <dhiatt@digitalocean.com>
Tested-by: Hongyu Ning <hongyu.ning@linux.intel.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210422123308.437092775@infradead.org
rq_lockp() includes a static_branch(), which is asm-goto, which is
asm volatile which defeats regular CSE. This means that:
if (!static_branch(&foo))
return simple;
if (static_branch(&foo) && cond)
return complex;
Doesn't fold and we get horrible code. Introduce __rq_lockp() without
the static_branch() on.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Don Hiatt <dhiatt@digitalocean.com>
Tested-by: Hongyu Ning <hongyu.ning@linux.intel.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210422123308.316696988@infradead.org
In preparation of playing games with rq->lock, abstract the thing
using an accessor.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Don Hiatt <dhiatt@digitalocean.com>
Tested-by: Hongyu Ning <hongyu.ning@linux.intel.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210422123308.136465446@infradead.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Don Hiatt <dhiatt@digitalocean.com>
Tested-by: Hongyu Ning <hongyu.ning@linux.intel.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210422123308.015639083@infradead.org
find_energy_efficient_cpu() (feec()) searches the best energy CPU
to place a task on. To do so, compute_energy() estimates the energy
impact of placing the task on a CPU, based on CPU and task utilization
signals.
Utilization signals can be concurrently updated while evaluating a
performance domain (pd). In some cases, this leads to having a
'negative delta', i.e. placing the task in the pd is seen as an
energy gain. Thus, any further energy comparison is biased.
In case of a 'negative delta', return prev_cpu since:
1. a 'negative delta' happens in less than 0.5% of feec() calls,
on a Juno with 6 CPUs (4 little, 2 big)
2. it is unlikely to have two consecutive 'negative delta' for
a task, so if the first call fails, feec() will correctly
place the task in the next feec() call
3. EAS current behavior tends to select prev_cpu if the task
doesn't raise the OPP of its current pd. prev_cpu is EAS's
generic decision
4. prev_cpu should be preferred to returning an error code.
In the latter case, select_idle_sibling() would do the placement,
selecting a big (and not energy efficient) CPU. As 3., the task
would potentially reside on the big CPU for a long time
Reported-by: Xuewen Yan <xuewen.yan@unisoc.com>
Suggested-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Donnefort <vincent.donnefort@arm.com>
Link: https://lkml.kernel.org/r/20210504090743.9688-3-Pierre.Gondois@arm.com
find_energy_efficient_cpu() searches the best energy CPU
to place a task on. To do so, the energy of each performance domain
(pd) is computed w/ and w/o the task placed on it.
The energy of a pd w/o the task (base_energy_pd) is computed prior
knowing whether a CPU is available in the pd.
Move the base_energy_pd computation after looping through the CPUs
of a pd and only compute it if at least one CPU is available.
Suggested-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Donnefort <vincent.donnefort@arm.com>
Link: https://lkml.kernel.org/r/20210504090743.9688-2-Pierre.Gondois@arm.com
The try_to_wake_up function has an optimization where it can queue
a task for wakeup on its previous CPU, if the task is still in the
middle of going to sleep inside schedule().
Once schedule() re-enables IRQs, the task will be woken up with an
IPI, and placed back on the runqueue.
If we have such a wakeup pending, there is no need to search other
CPUs for runnable tasks. Just skip (or bail out early from) newidle
balancing, and run the just woken up task.
For a memcache like workload test, this reduces total CPU use by
about 2%, proportionally split between user and system time,
and p99 and p95 application response time by 10% on average.
The schedstats run_delay number shows a similar improvement.
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lkml.kernel.org/r/20210422130236.0bb353df@imladris.surriel.com
In commit:
9fe1f127b9 ("sched/fair: Merge select_idle_core/cpu()")
in select_idle_cpu(), we check if an idle core is present in the LLC
of the target CPU via the flag "has_idle_cores". We look for the idle
core in select_idle_cores(). If select_idle_cores() isn't able to find
an idle core/CPU, we need to unset the has_idle_cores flag in the LLC
of the target to prevent other CPUs from going down this route.
However, the current code is unsetting it in the LLC of the current
CPU instead of the target CPU. This patch fixes this issue.
Fixes: 9fe1f127b9 ("sched/fair: Merge select_idle_core/cpu()")
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/1620746169-13996-1-git-send-email-ego@linux.vnet.ibm.com
