2
0
mirror of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2025-09-04 20:19:47 +08:00
Commit Graph

1845 Commits

Author SHA1 Message Date
Manivannan Sadhasivam
57eddec8dc PCI: qcom: Use bitfield definitions for register fields
To maintain uniformity throughout the driver and also to make the code
easier to read, let's make use of bitfield definitions for register fields.

Link: https://lore.kernel.org/r/20230316081117.14288-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-04-11 11:31:10 +02:00
Manivannan Sadhasivam
769e49d87b PCI: qcom: Sort and group registers and bitfield definitions
Sorting the registers and their bit definitions will make it easier to add
more definitions in the future and it also helps in maintenance.

While at it, let's also group the registers and bit definitions separately
as done in the pcie-qcom-ep driver.

Link: https://lore.kernel.org/r/20230316081117.14288-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-04-11 11:31:10 +02:00
Manivannan Sadhasivam
39171b33f6 PCI: qcom: Remove PCIE20_ prefix from register definitions
The PCIE part is redundant and 20 doesn't represent anything across the
SoCs supported now. So let's get rid of the prefix.

This involves adding the IP version suffix to one definition of
PARF_SLV_ADDR_SPACE_SIZE that defines offset specific to that version.
The other definition is generic for the rest of the versions.

Also, the register PCIE20_LNK_CONTROL2_LINK_STATUS2 is not used anywhere,
hence removed.

Link: https://lore.kernel.org/r/20230316081117.14288-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-04-11 11:31:10 +02:00
Manivannan Sadhasivam
2542e16c39 PCI: qcom: Fix the incorrect register usage in v2.7.0 config
Qcom PCIe IP version v2.7.0 and its derivatives don't contain the
PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT register. Instead, they have the new
PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 register. So fix the incorrect
register usage which is modifying a different register.

Also in this IP version, this register change doesn't depend on MSI
being enabled. So remove that check also.

Link: https://lore.kernel.org/r/20230316081117.14288-2-manivannan.sadhasivam@linaro.org
Fixes: ed8cc3b1fc ("PCI: qcom: Add support for SDM845 PCIe controller")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: <stable@vger.kernel.org> # 5.6+
2023-04-11 11:31:10 +02:00
Pali Rohár
6c6fa1f3f7 PCI: ixp4xx: Use PCI_CONF1_ADDRESS() macro
Simplify pci-ixp4xx.c driver code and use new PCI_CONF1_ADDRESS() macro for
accessing PCI config space.

Link: https://lore.kernel.org/r/20220928122539.15116-1-pali@kernel.org
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-03-24 16:48:32 +01:00
Sergio Paracuellos
50233e105a PCI: mt7621: Use dev_info() to log PCIe card detection
When there is no card plugged on a PCIe port a log reporting that
the port will be disabled is flagged as an error (dev_err()).

Since this is not an error at all, change the log level by using
dev_info() instead.

Link: https://lore.kernel.org/r/20230324073733.1596231-1-sergio.paracuellos@gmail.com
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-03-24 16:36:22 +01:00
H. Nikolaus Schaller
5f5ac460df PCI: imx6: Install the fault handler only on compatible match
commit bb38919ec5 ("PCI: imx6: Add support for i.MX6 PCIe controller")
added a fault hook to this driver in the probe function. So it was only
installed if needed.

commit bde4a5a00e ("PCI: imx6: Allow probe deferral by reset GPIO")
moved it from probe to driver init which installs the hook unconditionally
as soon as the driver is compiled into a kernel.

When this driver is compiled as a module, the hook is not registered
until after the driver has been matched with a .compatible and
loaded.

commit 415b6185c5 ("PCI: imx6: Fix config read timeout handling")
extended the fault handling code.

commit 2d8ed461db ("PCI: imx6: Add support for i.MX8MQ")
added some protection for non-ARM architectures, but this does not
protect non-i.MX ARM architectures.

Since fault handlers can be triggered on any architecture for different
reasons, there is no guarantee that they will be triggered only for the
assumed situation, leading to improper error handling (i.MX6-specific
imx6q_pcie_abort_handler) on foreign systems.

I had seen strange L3 imprecise external abort messages several times on
OMAP4 and OMAP5 devices and couldn't make sense of them until I realized
they were related to this unused imx6q driver because I had
CONFIG_PCI_IMX6=y.

Note that CONFIG_PCI_IMX6=y is useful for kernel binaries that are designed
to run on different ARM SoC and be differentiated only by device tree
binaries. So turning off CONFIG_PCI_IMX6 is not a solution.

Therefore we check the compatible in the init function before registering
the fault handler.

Link: https://lore.kernel.org/r/e1bcfc3078c82b53aa9b78077a89955abe4ea009.1678380991.git.hns@goldelico.com
Fixes: bde4a5a00e ("PCI: imx6: Allow probe deferral by reset GPIO")
Fixes: 415b6185c5 ("PCI: imx6: Fix config read timeout handling")
Fixes: 2d8ed461db ("PCI: imx6: Add support for i.MX8MQ")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
2023-03-24 16:07:55 +01:00
Yoshihiro Shimoda
cdce670991 PCI: dwc: Fix PORT_LINK_CONTROL update when CDM check enabled
If CDM_CHECK is enabled (by the DT "snps,enable-cdm-check" property), 'val'
is overwritten by PCIE_PL_CHK_REG_CONTROL_STATUS initialization.  Commit
ec7b952f45 ("PCI: dwc: Always enable CDM check if "snps,enable-cdm-check"
exists") did not account for further usage of 'val', so we wrote improper
values to PCIE_PORT_LINK_CONTROL when the CDM check is enabled.

Move the PCIE_PORT_LINK_CONTROL update to be completely after the
PCIE_PL_CHK_REG_CONTROL_STATUS register initialization.

[bhelgaas: commit log adapted from Serge's version]
Fixes: ec7b952f45 ("PCI: dwc: Always enable CDM check if "snps,enable-cdm-check" exists")
Link: https://lore.kernel.org/r/20230310123510.675685-2-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2023-03-21 13:06:24 -05:00
Xiaowei Bao
be567c6cbc PCI: layerscape: Add EP mode support for ls1028a
Add PCIe EP mode support for ls1028a.

Link: https://lore.kernel.org/r/20230209151050.233973-1-Frank.Li@nxp.com
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Acked-by: Roy Zang <Roy.Zang@nxp.com>
2023-03-17 17:36:37 +01:00
Lukas Bulwahn
727de4c087 PCI: rcar: Avoid defines prefixed with CONFIG
Defines prefixed with "CONFIG" should be limited to proper Kconfig options,
that are introduced in a Kconfig file.

In the R-car driver the bitmask to configure the SEND_ENABLE mode is named
CONFIG_SEND_ENABLE.

Rename this local definition to a more suitable name, containing the
register bitfield name defined in the R-Car Gen3 rev. 2.30 user
manual.

No functional change.

Link: https://lore.kernel.org/r/20230113084516.31888-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
[lpieralisi@kernel.org: Changed define naming and commit log]
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-03-10 13:34:27 +01:00
Josh Triplett
3a2776e8a0 PCI: kirin: Select REGMAP_MMIO
pcie-kirin uses regmaps, and needs to pull them in; otherwise, with
CONFIG_PCIE_KIRIN=y and without CONFIG_REGMAP_MMIO pcie-kirin produces
a linker failure looking for __devm_regmap_init_mmio_clk().

Fixes: d19afe7be1 ("PCI: kirin: Use regmap for APB registers")
Link: https://lore.kernel.org/r/04636141da1d6d592174eefb56760511468d035d.1668410580.git.josh@joshtriplett.org
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
[lpieralisi@kernel.org: commit log and removed REGMAP select]
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org # 5.16+
2023-03-10 11:22:24 +01:00
Linus Torvalds
8ff99ad04c phy-for-6.3
- Core support
 	- New devm_of_phy_optional_get() API with users and conversion
 
   - New support:
 	- Mediatek MT7986 tphy support
         - Qualcomm SM8550 UFS, PCIe, combo phy support, SM6115 / SM4250
           USB3 phy support, SM6350 combo phy support, SM6125 UFS PHY
 	  support amd SM8350 & SM8450 combo phy support
         - Qualcomm SNPS eUSB2 eUSB2 repeater drivers
 	- Allwinner F1C100s USB PHY support
 	- Tegra xusb support for Tegra234
 
   - Updates:
         - Yaml conversion for Qualcomm pcie2 phy and usb-hsic-phy
 	- G4 mode support in Qualcomm UFS phy and support for various SoCs
 	- Yaml conversion for Meson usb2 phy
 	- TI Type C support for usb phy for j721
 	- Yaml conversion for Tegra xusb binding
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmP4vg0ACgkQfBQHDyUj
 g0dJYxAA0DL9X6IFeK8U5blp/ZWmXBqbhRmnsf0KGsSRJMSgHkPruhOWfTCAvXnc
 2+xp8wiE0MdLI7xseJWZi7Q2r10f5LtU55rzbL3mI7MWd/g2WTlKiXCDrpa4fY/Z
 pxo+892vUJh3+I2+Sjf0JnIY89MV/sqSLXsFeKDtvp7J9lMjA98TV6m+YDVTXn22
 SW3hjaB8ochSQV1HEMdEJWsrZc3lmszLdQM+qz3PafyQRbhc1A98Vkf0X/sWR/Ot
 p0FCXlNnY3O272dnrU0V5yv7wwWqjVDN5+Q3vk3AbSlo9ERLVwchayUzxi8EIS7t
 cPmxhsyMoEmsSIPx4z47vLt1NQoqiaKNM7XCrn13Z0fE9fbTW8Trx8VBXcIUsE98
 hT6IxrjRFGJOta8koOssBqSjuwP4QBIZiwXL2YEujj3hGqyRefOCN5XBek7dVyDe
 ctwJsIKBCG8Wh87dFldYLrJgQKR9svZXDjxVADpYMUpPM2v02DCWhUyM50ODowZf
 Yl7bP8dXtn2UBIybbhNTZg29PbrATk73tcr73GZeX8JTOK2vpsZ3+fUsdxPYzed3
 lF2vw361E2ry1DtgmH7XMXevDFvKJ/aks5FIAKebc1tlAPPGYVIkBqyQprAQmlS3
 tDQ+6+jQLAr14iSaVQd9MC3obNqbJYHf1WEU3rKtDy3MB0flbqo=
 =2g27
 -----END PGP SIGNATURE-----

Merge tag 'phy-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

Pull phy updates from Vinod Koul:
 "This features a bunch of new device support, a couple of new drivers,
  yaml conversion and updates of a few drivers.

  Core support:

   - New devm_of_phy_optional_get() API with users and conversion

  New hardware support:

   - Mediatek MT7986 phy support

   - Qualcomm SM8550 UFS, PCIe, combo phy support, SM6115 / SM4250 USB3
     phy support, SM6350 combo phy support, SM6125 UFS PHY support amd
     SM8350 & SM8450 combo phy support

   - Qualcomm SNPS eUSB2 eUSB2 repeater drivers

   - Allwinner F1C100s USB PHY support

   - Tegra xusb support for Tegra234

  Updates:

   - Yaml conversion for Qualcomm pcie2 phy and usb-hsic-phy

   - G4 mode support in Qualcomm UFS phy and support for various SoCs

   - Yaml conversion for Meson usb2 phy

   - TI Type C support for usb phy for j721

   - Yaml conversion for Tegra xusb binding"

* tag 'phy-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (106 commits)
  phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater
  phy: qcom: Add QCOM SNPS eUSB2 repeater driver
  dt-bindings: phy: qcom,snps-eusb2-phy: Add phys property for the repeater
  dt-bindings: phy: Add qcom,snps-eusb2-repeater schema file
  dt-bindings: phy: amlogic,g12a-usb3-pcie-phy: add missing optional phy-supply property
  phy: rockchip-typec: Fix unsigned comparison with less than zero
  phy: rockchip-typec: fix tcphy_get_mode error case
  phy: qcom: snps-eusb2: Add missing headers
  phy: qcom-qmp-combo: Add support for SM8550
  phy: qcom-qmp: Add v6 DP register offsets
  phy: qcom-qmp: pcs-usb: Add v6 register offsets
  dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Document SM8550 compatible
  phy: qcom: Add QCOM SNPS eUSB2 driver
  dt-bindings: phy: Add qcom,snps-eusb2-phy schema file
  phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs
  phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets
  phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets
  phy: qcom-qmp: pcs-pcie: Add v6.20 register offsets
  phy: qcom-qmp: pcs-pcie: Add v6 register offsets
  phy: qcom-qmp: pcs: Add v6.20 register offsets
  ...
2023-02-24 17:22:11 -08:00
Linus Torvalds
90ddb3f034 pci-v6.3-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmP2dbsUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vzBDg//aW2IeJYku5ENXwwnCQjBlyjBGOOZ
 456KGpFt/ky0N9Jp0ZS3nQSa5YN7q+L8XY48gu6I7s1hXly8iLZKLrJN++S//k55
 BadXu7mDUyVoY74LYvBe0nlXuwJul2qnq9IJLufRucrn1yoyqApAh39IRdCzi4U8
 mP+wad7sQA0Si4bpf80uwn6Yq8SrDoO0mtmO/dZSXJooM2t2SnDXEL/fxMwTNDA4
 XsVSP9FrbPmcTLo8mkDa8Dy7JKbL6KQJF9yDlmYzuA2spQpTf+YLLfsNnmE+850h
 WTtfCjVaYtlik7i9qTB+VcN1CsGVepYKK3H5the16Aeql2Fu+Ji5KSt74C220Yi9
 ZSDA93d/EfGc5egKyBdUUMFgqhe46srRUAoWcMrx2T4ARGuOm5EYCa9C8C7dFmO0
 j6f9MYL3j2Sw3FROEKViRVOFfbIfVW1TXIo3x0fE0ud3xkg73eKp/++X8QeTMjox
 2ArY2AWPNQpUI1oMlKxlSEd5XjFf7n/hHDtFqj9bIuJzt0/8wXQf0jCYTjhpGkRB
 pmO+lColK6lp+bg8aWRRkiwN73xGdQhKaeXLo0Iq4T6xr0Lb3XoskHZvt6NIGe/A
 ds5/uwtErq6kCf2G9YG1xfh+G1bimbjWwsHCNfSNXzTsWGDFTCb8tvqF90m+7+yl
 bllxTXA6PO312Tw=
 =/y4d
 -----END PGP SIGNATURE-----

Merge tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Rework portdrv shutdown so it disables interrupts but doesn't
     disable bus mastering, which leads to hangs on Loongson LS7A

   - Add mechanism to prevent Max_Read_Request_Size (MRRS) increases,
     again to avoid hardware issues on Loongson LS7A (and likely other
     devices based on DesignWare IP)

   - Ignore devices with a firmware (DT or ACPI) node that says the
     device is disabled

  Resource management:

   - Distribute spare resources to unconfigured hotplug bridges at
     boot-time (not just when hot-adding such a bridge), which makes
     hot-adding devices to docks work better. Tried this in v6.1 but had
     to revert for regressions, so try again

   - Fix root bus issue that dropped resources that happened to end
     at 0, e.g., [bus 00]

  PCI device hotplug:

   - Remove device locking when marking device as disconnected so this
     doesn't have to wait for concurrent driver bind/unbind to complete

   - Quirk more Qualcomm bridges that don't fully implement the PCIe
     Slot Status 'Command Completed' bit

  Power management:

   - Account for _S0W of the target bridge in acpi_pci_bridge_d3() so we
     don't miss hot-add notifications for USB4 docks, Thunderbolt, etc

  Reset:

   - Observe delay after reset, e.g., resuming from system sleep,
     regardless of whether a bridge can suspend to D3cold at runtime

   - Wait for secondary bus to become ready after a bridge reset

  Virtualization:

   - Avoid FLR on some AMD FCH AHCI adapters where it doesn't work

   - Allow independent IOMMU groups for some Wangxun NICs that prevent
     peer-to-peer transactions but don't advertise an ACS Capability

  Error handling:

   - Configure End-to-End-CRC (ECRC) only if Linux owns the AER
     Capability

   - Remove redundant Device Control Error Reporting Enable in the AER
     service driver since this is already done for all devices during
     enumeration

  ASPM:

   - Add pci_enable_link_state() interface to allow drivers to enable
     ASPM link state

  Endpoint framework:

   - Move dra7xx and tegra194 linkup processing from hard IRQ to
     threaded IRQ handler

   - Add a separate lock for endpoint controller list of endpoint
     function drivers to prevent deadlock in callbacks

   - Pass events from endpoint controller to endpoint function drivers
     via callbacks instead of notifiers

  Synopsys DesignWare eDMA controller driver (acked by Vinod):

   - Fix CPU vs PCI address issues

   - Fix source vs destination address issues

   - Fix issues with interleaved transfer semantics

   - Fix channel count initialization issue (issue still exists in
     several other drivers)

   - Clean up and improve debugfs usage so it will work on platforms
     with several eDMA devices

  Baikal T-1 PCIe controller driver:

   - Set a 64-bit DMA mask

  Freescale i.MX6 PCIe controller driver:

   - Add i.MX8MM, i.MX8MQ, i.MX8MP endpoint mode DT binding and driver
     support

  Intel VMD host bridge driver:

   - Add quirk to configure PCIe ASPM and LTR. This is normally done by
     BIOS, and will be for future products

  Marvell MVEBU PCIe controller driver:

   - Mark this driver as broken in Kconfig since bugs prevent its daily
     usage

  MediaTek MT7621 PCIe controller driver:

   - Delay PHY port initialization to improve boot reliability for ZBT
     WE1326, ZBT WF3526-P, and some Netgear models

  Qualcomm PCIe controller driver:

   - Add MSM8998 DT compatible string

   - Unify MSM8996 and MSM8998 clock orderings

   - Add SM8350 DT binding and driver support

   - Add IPQ8074 Gen3 DT binding and driver support

   - Correct qcom,perst-regs in DT binding

   - Add qcom_pcie_host_deinit() so the PHY is powered off and
     regulators and clocks are disabled on late host-init errors

  Socionext UniPhier Pro5 controller driver:

   - Clean up uniphier-ep reg, clocks, resets, and their names in DT
     binding

  Synopsys DesignWare PCIe controller driver:

   - Restrict coherent DMA mask to 32 bits for MSI, but allow controller
     drivers to set 64-bit streaming DMA mask

   - Add eDMA engine support in both Root Port and Endpoint controllers

  Miscellaneous:

   - Remove MODULE_LICENSE from boolean drivers so they don't look like
     modules so modprobe can complain about them"

* tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (86 commits)
  PCI: dwc: Add Root Port and Endpoint controller eDMA engine support
  PCI: bt1: Set 64-bit DMA mask
  PCI: dwc: Restrict only coherent DMA mask for MSI address allocation
  dmaengine: dw-edma: Prepare dw_edma_probe() for builtin callers
  dmaengine: dw-edma: Depend on DW_EDMA instead of selecting it
  dmaengine: dw-edma: Add mem-mapped LL-entries support
  PCI: Remove MODULE_LICENSE so boolean drivers don't look like modules
  PCI: hv: Drop duplicate PCI_MSI dependency
  PCI/P2PDMA: Annotate RCU dereference
  PCI/sysfs: Constify struct kobj_type pci_slot_ktype
  PCI: hotplug: Allow marking devices as disconnected during bind/unbind
  PCI: pciehp: Add Qualcomm quirk for Command Completed erratum
  PCI: qcom: Add IPQ8074 Gen3 port support
  dt-bindings: PCI: qcom: Add IPQ8074 Gen3 port
  dt-bindings: PCI: qcom: Sort compatibles alphabetically
  PCI: qcom: Fix host-init error handling
  PCI: qcom: Add SM8350 support
  dt-bindings: PCI: qcom: Add SM8350
  dt-bindings: PCI: qcom-ep: Correct qcom,perst-regs
  dt-bindings: PCI: qcom: Unify MSM8996 and MSM8998 clock order
  ...
2023-02-24 16:51:40 -08:00
Bjorn Helgaas
3eb5d0f26f Merge branch 'pci/misc'
- Drop bogus kernel-doc marker in pci_endpoint_test.c (Randy Dunlap)

- Fix epf_ntb_mw_bar_clear() kernel-doc (Yang Yingliang)

- Constify struct kobj_type pci_slot_ktype (Thomas Weißschuh)

* pci/misc:
  PCI: hv: Drop duplicate PCI_MSI dependency
  PCI/sysfs: Constify struct kobj_type pci_slot_ktype
  PCI: endpoint: pci-epf-vntb: Add epf_ntb_mw_bar_clear() num_mws kernel-doc
  misc: pci_endpoint_test: Drop initial kernel-doc marker
2023-02-22 13:47:32 -06:00
Bjorn Helgaas
90fb1a3652 Merge branch 'pci/controller/vmd'
- Add pci_enable_link_state() to allow drivers to enable ASPM link state
  (Michael Bottini)

- Add quirk to enable all ASPM link states and program LTR for devices
  below VMD (David E. Box)

* pci/controller/vmd:
  PCI: vmd: Add quirk to configure PCIe ASPM and LTR
  PCI: vmd: Create feature grouping for client products
  PCI: vmd: Use PCI_VDEVICE in device list
  PCI/ASPM: Add pci_enable_link_state()
2023-02-22 13:47:31 -06:00
Bjorn Helgaas
b237474a90 Merge branch 'pci/controller/qcom'
- Add DT compatible for qcom MSM8998 (Krzysztof Kozlowski)

- Unify qcom MSM8996 and MSM8998 clock orderings (Krzysztof Kozlowski)

- Correct qcom,perst-regs (Krzysztof Kozlowski)

- Add qcom SM8350 DT binding and driver support (Dmitry Baryshkov)

- Add qcom_pcie_host_deinit() so the PHY is powered off and regulators and
  clocks are disabled on late host-init errors (Johan Hovold)

- Add IPQ8074 Gen3 port DT binding and driver support (the Gen2 port was
  already supported) (Robert Marko)

* pci/controller/qcom:
  PCI: qcom: Add IPQ8074 Gen3 port support
  dt-bindings: PCI: qcom: Add IPQ8074 Gen3 port
  dt-bindings: PCI: qcom: Sort compatibles alphabetically
  PCI: qcom: Fix host-init error handling
  PCI: qcom: Add SM8350 support
  dt-bindings: PCI: qcom: Add SM8350
  dt-bindings: PCI: qcom-ep: Correct qcom,perst-regs
  dt-bindings: PCI: qcom: Unify MSM8996 and MSM8998 clock order
  dt-bindings: PCI: qcom: Add MSM8998 specific compatible
  dt-bindings: PCI: qcom: Add oneOf to compatible match
2023-02-22 13:47:30 -06:00
Bjorn Helgaas
7cfd342bd1 Merge branch 'pci/controller/mvebu'
- Mark mvebu driver as broken (Pali Rohár)

* pci/controller/mvebu:
  PCI: mvebu: Mark driver as BROKEN
2023-02-22 13:47:30 -06:00
Bjorn Helgaas
181a60a0ee Merge branch 'pci/controller/mt7621'
- Delay PHY initialization to make boots reliable for ZBT WE1326 and ZBT
  WF3526-P and some Netgear models (Sergio Paracuellos)

* pci/controller/mt7621:
  PCI: mt7621: Delay phy ports initialization
2023-02-22 13:47:29 -06:00
Bjorn Helgaas
a9cd360245 Merge branch 'pci/controller/imx6'
- Add i.MX8MM, i.MX8MQ, i.MX8MP endpoint mode DT binding and driver support
  (Richard Zhu)

* pci/controller/imx6:
  PCI: imx6: Add i.MX8MP PCIe EP support
  PCI: imx6: Add i.MX8MM PCIe EP support
  PCI: imx6: Add i.MX8MQ PCIe EP support
  PCI: imx6: Add i.MX PCIe EP mode support
  misc: pci_endpoint_test: Add i.MX8 PCIe EP device support
  dt-bindings: imx6q-pcie: Add i.MX8MP PCIe EP mode compatible string
  dt-bindings: imx6q-pcie: Add i.MX8MQ PCIe EP mode compatible string
  dt-bindings: imx6q-pcie: Add i.MX8MM PCIe EP mode compatible string
2023-02-22 13:47:29 -06:00
Bjorn Helgaas
5256d49380 Merge branch 'pci/controller/dwc'
- Release previously-requested DW eDMA IRQs if request_irq() fails (Serge
  Semin)

- Convert DW eDMA linked-list (ll) and data target (dt) from CPU-relative
  addresses to PCI bus addresses (Serge Semin)

- Fix missing src/dst address for interleaved transfers (Serge Semin)

- Enforce the DW eDMA restriction that interleaved transfers must increment
  src and dst addresses (Serge Semin)

- Fix some invalid interleaved transfer semantics (Serge Semin)

- Convert CPU-relative addresses to PCI bus addresses for eDMA engine
  (Serge Semin)

- Drop chancnt initialization from dw-edma-core, since it is managed by the
  dmaengine core, e.g., in dma_async_device_channel_register() (Serge Semin)

- Clean up bogus casting of debugfs_entries.reg addresses (Serge Semin)

- Ignore debugfs file/directory creation errors (Serge Semin)

- Allocate debugfs entries from the heap to prepare for multi-eDMA
  platforms (Serge Semin)

- Simplify and rework register accessors to remove another obstacle to
  multi-eDMA platforms (Serge Semin)

- Consolidate eDMA read/write channels in a single dma_device to simplify,
  better reflect the hardware design, and avoid a debugfs complaint (Serge
  Semin)

- Move eDMA-specific debugfs nodes into existing dmaengine subdirectory
  (Serge Semin)

- Fix a readq_ch() truncation from 64 to 32 bits (Serge Semin)

- Use existing readq()/writeq rather than hand-coding new ones (Serge
  Semin)

- Drop unnecessary data target region allocation in favor of existing
  dw_edma_chip members (Serge Semin)

- Use parent device in eDMA controller name to prepare for multi-eDMA
  platforms (Serge Semin)

- In addition to the existing MMIO accessors for linked list entries, add
  support for ioremapped entries for use by eDMA in Root Ports or local
  Endpoints (Serge Semin)

- Convert DW_EDMA_PCIE so it depends on DW_EDMA instead of selecting it
  (Serge Semin)

- Allow DWC drivers to set streaming DMA masks larger than 32 bits;
  previously both streaming and coherent DMA were limited to 32 bits
  because some PCI devices only support coherent 32-bit DMA for MSI (Serge
  Semin)

- Set 64-bit streaming and coherent DMA mask for the bt1 driver (Serge
  Semin)

- Add DW Root Port and Endpoint controller support for eDMA (Serge Semin)

* pci/controller/dwc:
  PCI: dwc: Add Root Port and Endpoint controller eDMA engine support
  PCI: bt1: Set 64-bit DMA mask
  PCI: dwc: Restrict only coherent DMA mask for MSI address allocation
  dmaengine: dw-edma: Prepare dw_edma_probe() for builtin callers
  dmaengine: dw-edma: Depend on DW_EDMA instead of selecting it
  dmaengine: dw-edma: Add mem-mapped LL-entries support
  dmaengine: dw-edma: Skip cleanup procedure if no private data found
  dmaengine: dw-edma: Replace chip ID number with device name
  dmaengine: dw-edma: Drop DT-region allocation
  dmaengine: dw-edma: Use non-atomic io-64 methods
  dmaengine: dw-edma: Fix readq_ch() return value truncation
  dmaengine: dw-edma: Use DMA engine device debugfs subdirectory
  dmaengine: dw-edma: Join read/write channels into a single device
  dmaengine: dw-edma: Move eDMA data pointer to debugfs node descriptor
  dmaengine: dw-edma: Simplify debugfs context CSRs init procedure
  dmaengine: dw-edma: Rename debugfs dentry variables to 'dent'
  dmaengine: dw-edma: Convert debugfs descs to being heap-allocated
  dmaengine: dw-edma: Add dw_edma prefix to debugfs nodes descriptor
  dmaengine: dw-edma: Stop checking debugfs_create_*() return value
  dmaengine: dw-edma: Drop unnecessary debugfs reg casts
  dmaengine: dw-edma: Drop chancnt initialization
  dmaengine: dw-edma: Add PCI bus address getter to the remote EP glue driver
  dmaengine: dw-edma: Add CPU to PCI bus address translation
  dmaengine: dw-edma: Fix invalid interleaved xfers semantics
  dmaengine: dw-edma: Don't permit non-inc interleaved xfers
  dmaengine: dw-edma: Fix missing src/dst address of interleaved xfers
  dmaengine: dw-edma: Convert ll/dt phys address to PCI bus/DMA address
  dmaengine: dw-edma: Release requested IRQs on failure
  dmaengine: Fix dma_slave_config.dst_addr description
2023-02-22 13:47:29 -06:00
Bjorn Helgaas
33abd97c34 Merge branch 'pci/endpoint'
- Convert dra7xx to threaded IRQ handler (Manivannan Sadhasivam)

- Move tegra194 dw_pcie_ep_linkup() to threaded IRQ handler (Manivannan
  Sadhasivam)

- Add a separate lock for the endpoint pci_epf list to avoid deadlock
  while running callbacks (Manivannan Sadhasivam)

- Use callbacks instead of notifier chains to signal events from EPC to EPF
  drivers (Manivannan Sadhasivam)

- Use link_up() callback in place of LINK_UP notifier (Manivannan
  Sadhasivam)

* pci/endpoint:
  PCI: endpoint: Use link_up() callback in place of LINK_UP notifier
  PCI: endpoint: Use callback mechanism for passing events from EPC to EPF
  PCI: endpoint: Use a separate lock for protecting epc->pci_epf list
  PCI: tegra194: Move dw_pcie_ep_linkup() to threaded IRQ handler
  PCI: dra7xx: Use threaded IRQ handler for "dra7xx-pcie-main" IRQ
2023-02-22 13:47:28 -06:00
Bjorn Helgaas
881766fe0d Merge branch 'pci/kbuild'
- Remove MODULE_LICENSE from boolean drivers so they don't look like
  modules so modprobe will complain about them (Nick Alcock)

* pci/kbuild:
  PCI: Remove MODULE_LICENSE so boolean drivers don't look like modules
2023-02-22 13:47:25 -06:00
Serge Semin
939fbcd568 PCI: dwc: Add Root Port and Endpoint controller eDMA engine support
Since the DW eDMA core now supports eDMA controllers embedded in locally
accessible DW PCIe Root Ports and Endpoints, register these controllers
when possible.

To do that the DW PCIe core driver needs to perform some preparations
first. First of all, it needs to find the eDMA controller CSRs base
address, whether they are accessible over the Port Logic or iATU unrolled
space.  Afterwards it can try to auto-detect the eDMA controller
availability and number of read/write channels.  If none are found the
procedure silently returns without error.

Secondly, the platform is supposed to provide either combined or
per-channel IRQ signals.  If no valid IRQs set is found, the procedure
returns without error to be backward compatible with platforms where DW
PCIe controllers have eDMA but lack the IRQ description.

Finally, before actually probing the eDMA device we need to allocate LLP
items buffers. After that the DW eDMA can be registered. If registration is
successful, a message regarding the number of detected Read/Write eDMA
channels will be printed to the system as is done for the iATU settings.

Note: the DW PCI controller driver (either host or endpoint mode) is
currently always built-in, so if the DW eDMA core is built as a module
(CONFIG_DW_EDMA=m), eDMA controllers will not be registered even if the
dw-edma module is later loaded.

Link: https://lore.kernel.org/r/20230113171409.30470-28-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
2023-02-22 13:46:14 -06:00
Serge Semin
68373f2c0f PCI: bt1: Set 64-bit DMA mask
The DW PCIe Root Port IP core is synthesized with the 64-bit AXI address
bus.  Since the device is also equipped with the eDMA engine, explicitly
set the device DMA mask so DMA engine clients can allocate data buffers
anywhere in the 64-bit memory space.

Link: https://lore.kernel.org/r/20230113171409.30470-27-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-02-22 13:46:14 -06:00
Serge Semin
6c784e21b3 PCI: dwc: Restrict only coherent DMA mask for MSI address allocation
The MSI target address must be in the lowest 4GB memory to support PCI
peripherals without 64-bit MSI support.  Since the allocation is done from
DMA coherent memory, set only the coherent DMA mask, leaving the streaming
DMA mask alone.

Thus streaming DMA operations will work with no artificial limitations. It
will be specifically useful for the eDMA-capable controllers so the
corresponding DMA engine clients would map the DMA buffers with no need for
SWIOTLB for buffers allocated above 4GB.

Add a brief comment about the reason allocating the MSI target address
below 4GB.

Link: https://lore.kernel.org/r/20230113171409.30470-26-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2023-02-22 13:46:14 -06:00
Linus Torvalds
b8878e5a5c hyperv-next for v6.3.
-----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmPzgDgTHHdlaS5saXVA
 a2VybmVsLm9yZwAKCRB2FHBfkEGgXrc7CACfG4SSd8KkWU/y8Q66Irxdau0a3ETD
 KL4UNRKGIyKujufgFsme79O6xVSSsCNSay449wk20hqn8lnwbSRi9pUwmLn29hfd
 CMFleWIqgwGFfC1do5DRF1vrt1siuG/jVE07mWsEwuY2iHx/es+H7LiQKidhkndZ
 DhXRqoi7VYiJv5fRSumpkUJrMZiI96o9Mk09HUksdMwCn3+7RQEqHnlTH5KOozKF
 iMroDB72iNw5Na/USZwWL2EDRptENam3lFkPBeDPqNw0SbG4g65JGPR9DSa0Lkbq
 AGCJQkdU33mcYQG5MY7R4K1evufpOl/apqLW7h92j45Znr9ok6Vr2c1R
 =J1VT
 -----END PGP SIGNATURE-----

Merge tag 'hyperv-next-signed-20230220' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv updates from Wei Liu:

 - allow Linux to run as the nested root partition for Microsoft
   Hypervisor (Jinank Jain and Nuno Das Neves)

 - clean up the return type of callback functions (Dawei Li)

* tag 'hyperv-next-signed-20230220' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  x86/hyperv: Fix hv_get/set_register for nested bringup
  Drivers: hv: Make remove callback of hyperv driver void returned
  Drivers: hv: Enable vmbus driver for nested root partition
  x86/hyperv: Add an interface to do nested hypercalls
  Drivers: hv: Setup synic registers in case of nested root partition
  x86/hyperv: Add support for detecting nested hypervisor
2023-02-21 16:59:23 -08:00
Linus Torvalds
8cc01d43f8 RCU pull request for v6.3
This pull request contains the following branches:
 
 doc.2023.01.05a: Documentation updates.
 
 fixes.2023.01.23a: Miscellaneous fixes, perhaps most notably:
 
 o	Throttling callback invocation based on the number of callbacks
 	that are now ready to invoke instead of on the total number
 	of callbacks.
 
 o	Several patches that suppress false-positive boot-time
 	diagnostics, for example, due to lockdep not yet being
 	initialized.
 
 o	Make expedited RCU CPU stall warnings dump stacks of any tasks
 	that are blocking the stalled grace period.  (Normal RCU CPU
 	stall warnings have doen this for mnay years.)
 
 o	Lazy-callback fixes to avoid delays during boot, suspend, and
 	resume.  (Note that lazy callbacks must be explicitly enabled,
 	so this should not (yet) affect production use cases.)
 
 kvfree.2023.01.03a: Cause kfree_rcu() and friends to take advantage of
 	polled grace periods, thus reducing memory footprint by almost
 	two orders of magnitude, admittedly on a microbenchmark.
 	This series also begins the transition from kfree_rcu(p) to
 	kfree_rcu_mightsleep(p).  This transition was motivated by bugs
 	where kfree_rcu(p), which can block, was typed instead of the
 	intended kfree_rcu(p, rh).
 
 srcu.2023.01.03a: SRCU updates, perhaps most notably fixing a bug that
 	causes SRCU to fail when booted on a system with a non-zero boot
 	CPU.  This surprising situation actually happens for kdump kernels
 	on the powerpc architecture.  It also adds an srcu_down_read()
 	and srcu_up_read(), which act like srcu_read_lock() and
 	srcu_read_unlock(), but allow an SRCU read-side critical section
 	to be handed off from one task to another.
 
 srcu-always.2023.02.02a: Cleans up the now-useless SRCU Kconfig option.
 	There are a few more commits that are not yet acked or pulled
 	into maintainer trees, and these will be in a pull request for
 	a later merge window.
 
 tasks.2023.01.03a: RCU-tasks updates, perhaps most notably these fixes:
 
 o	A strange interaction between PID-namespace unshare and the
 	RCU-tasks grace period that results in a low-probability but
 	very real hang.
 
 o	A race between an RCU tasks rude grace period on a single-CPU
 	system and CPU-hotplug addition of the second CPU that can result
 	in a too-short grace period.
 
 o	A race between shrinking RCU tasks down to a single callback list
 	and queuing a new callback to some other CPU, but where that
 	queuing is delayed for more than an RCU grace period.  This can
 	result in that callback being stranded on the non-boot CPU.
 
 torture.2023.01.05a: Torture-test updates and fixes.
 
 torturescript.2023.01.03a: Torture-test scripting updates and fixes.
 
 stall.2023.01.09a: Provide additional RCU CPU stall-warning information
 	in kernels built with CONFIG_RCU_CPU_STALL_CPUTIME=y, and
 	restore the full five-minute timeout limit for expedited RCU
 	CPU stall warnings.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmPq29UTHHBhdWxtY2tA
 a2VybmVsLm9yZwAKCRCevxLzctn7jAhVEACEAKJY1VJ9IUqz7CwzAYkzgRJfiygh
 oDUXmlqtm6ew9pr2GdLUVCVsUSldzBc0K7Djb/G1niv4JPs+v7YwupIV33+UbStU
 Qxt6ztTdxc4lKospLm1+2vF9ZdzVEmiP4wVCc4iDarv5FM3FpWSTNc8+L7qmlC+X
 myjv+GqMTxkXZBvYJOgJGFjDwN8noTd7Fr3mCCVLFm3PXMDa7tcwD6HRP5AqD2N8
 qC5M6LEqepKVGmz0mYMLlSN1GPaqIsEcexIFEazRsPEivPh/iafyQCQ/cqxwhXmV
 vEt7u+dXGZT/oiDq9cJ+/XRDS2RyKIS6dUE14TiiHolDCn1ONESahfA/gXWKykC2
 BaGPfjWXrWv/hwbeZ+8xEdkAvTIV92tGpXir9Fby1Z5PjP3balvrnn6hs5AnQBJb
 NdhRPLzy/dCnEF+CweAYYm1qvTo8cd5nyiNwBZHn7rEAIu3Axrecag1rhFl3AJ07
 cpVMQXZtkQVa2X8aIRTUC+ijX6yIqNaHlu0HqNXgIUTDzL4nv5cMjOMzpNQP9/dZ
 FwAMZYNiOk9IlMiKJ8ZiVcxeiA8ouIBlkYM3k6vGrmiONZ7a/EV/mSHoJqI8bvqr
 AxUIJ2Ayhg3bxPboL5oKgCiLql0A7ZVvz6quX6McitWGMgaSvel1fDzT3TnZd41e
 4AFBFd/+VedUGg==
 =bBYK
 -----END PGP SIGNATURE-----

Merge tag 'rcu.2023.02.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull RCU updates from Paul McKenney:

 - Documentation updates

 - Miscellaneous fixes, perhaps most notably:

      - Throttling callback invocation based on the number of callbacks
        that are now ready to invoke instead of on the total number of
        callbacks

      - Several patches that suppress false-positive boot-time
        diagnostics, for example, due to lockdep not yet being
        initialized

      - Make expedited RCU CPU stall warnings dump stacks of any tasks
        that are blocking the stalled grace period. (Normal RCU CPU
        stall warnings have done this for many years)

      - Lazy-callback fixes to avoid delays during boot, suspend, and
        resume. (Note that lazy callbacks must be explicitly enabled, so
        this should not (yet) affect production use cases)

 - Make kfree_rcu() and friends take advantage of polled grace periods,
   thus reducing memory footprint by almost two orders of magnitude,
   admittedly on a microbenchmark

   This also begins the transition from kfree_rcu(p) to
   kfree_rcu_mightsleep(p). This transition was motivated by bugs where
   kfree_rcu(p), which can block, was typed instead of the intended
   kfree_rcu(p, rh)

 - SRCU updates, perhaps most notably fixing a bug that causes SRCU to
   fail when booted on a system with a non-zero boot CPU. This
   surprising situation actually happens for kdump kernels on the
   powerpc architecture

   This also adds an srcu_down_read() and srcu_up_read(), which act like
   srcu_read_lock() and srcu_read_unlock(), but allow an SRCU read-side
   critical section to be handed off from one task to another

 - Clean up the now-useless SRCU Kconfig option

   There are a few more commits that are not yet acked or pulled into
   maintainer trees, and these will be in a pull request for a later
   merge window

 - RCU-tasks updates, perhaps most notably these fixes:

      - A strange interaction between PID-namespace unshare and the
        RCU-tasks grace period that results in a low-probability but
        very real hang

      - A race between an RCU tasks rude grace period on a single-CPU
        system and CPU-hotplug addition of the second CPU that can
        result in a too-short grace period

      - A race between shrinking RCU tasks down to a single callback
        list and queuing a new callback to some other CPU, but where
        that queuing is delayed for more than an RCU grace period. This
        can result in that callback being stranded on the non-boot CPU

 - Torture-test updates and fixes

 - Torture-test scripting updates and fixes

 - Provide additional RCU CPU stall-warning information in kernels built
   with CONFIG_RCU_CPU_STALL_CPUTIME=y, and restore the full five-minute
   timeout limit for expedited RCU CPU stall warnings

* tag 'rcu.2023.02.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (80 commits)
  rcu/kvfree: Add kvfree_rcu_mightsleep() and kfree_rcu_mightsleep()
  kernel/notifier: Remove CONFIG_SRCU
  init: Remove "select SRCU"
  fs/quota: Remove "select SRCU"
  fs/notify: Remove "select SRCU"
  fs/btrfs: Remove "select SRCU"
  fs: Remove CONFIG_SRCU
  drivers/pci/controller: Remove "select SRCU"
  drivers/net: Remove "select SRCU"
  drivers/md: Remove "select SRCU"
  drivers/hwtracing/stm: Remove "select SRCU"
  drivers/dax: Remove "select SRCU"
  drivers/base: Remove CONFIG_SRCU
  rcu: Disable laziness if lazy-tracking says so
  rcu: Track laziness during boot and suspend
  rcu: Remove redundant call to rcu_boost_kthread_setaffinity()
  rcu: Allow up to five minutes expedited RCU CPU stall-warning timeouts
  rcu: Align the output of RCU CPU stall warning messages
  rcu: Add RCU stall diagnosis information
  sched: Add helper nr_context_switches_cpu()
  ...
2023-02-21 10:45:51 -08:00
Nick Alcock
f98954b293 PCI: Remove MODULE_LICENSE so boolean drivers don't look like modules
Since 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations are
used to identify modules. As a consequence, MODULE_LICENSE in non-modules
causes modprobe to misidentify the object file as a module when it is not,
and modprobe might succeed rather than failing with a suitable error
message.

For tristate modules that can be either built-in or loaded at runtime,
modprobe succeeds in both cases:

  # modprobe ext4
  [exit status zero if CONFIG_EXT4_FS=y or =m]

For boolean modules like the Standard Hot Plug Controller driver (shpchp)
that cannot be loaded at runtime, modprobe should always fail like this:

  # modprobe shpchp
  modprobe: FATAL: Module shpchp not found in directory /lib/modules/...
  [exit status non-zero regardless of CONFIG_HOTPLUG_PCI_SHPC]

but prior to this commit, shpchp_core.c contained MODULE_LICENSE, so
"modprobe shpchp" silently succeeded when it should have failed.

Remove MODULE_LICENSE in files that cannot be built as modules.

[bhelgaas: commit log, squash]
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20230216152410.4312-1-nick.alcock@oracle.com/
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-02-17 08:47:58 -06:00
Lukas Bulwahn
9574d57f2d PCI: hv: Drop duplicate PCI_MSI dependency
Commit a474d3fbe2 ("PCI/MSI: Get rid of PCI_MSI_IRQ_DOMAIN") removed
PCI_MSI_IRQ_DOMAIN and made all previous references to it refer to PCI_MSI
instead.

PCI_HYPERV_INTERFACE already depended on PCI_MSI && PCI_MSI_IRQ_DOMAIN, so
we ended up with a redundant dependency on PCI_MSI && PCI_MSI.  Drop the
duplicate.

No functional change. Just a stylistic clean-up.

Link: https://lore.kernel.org/r/20221215101310.9135-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-02-16 17:20:42 -06:00
Robert Marko
f356132229 PCI: qcom: Add IPQ8074 Gen3 port support
IPQ8074 has one Gen2 and one Gen3 port, with Gen2 port already supported.
Add compatible for Gen3 port which uses the same controller as IPQ6018.

Link: https://lore.kernel.org/r/20230113164449.906002-7-robimarko@gmail.com
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-02-14 11:41:04 -06:00
Johan Hovold
997e010de9 PCI: qcom: Fix host-init error handling
Implement the new host_deinit() callback so that the PHY is powered off
and regulators and clocks are disabled also on late host-init errors.

Link: https://lore.kernel.org/r/20221017114705.8277-2-johan+linaro@kernel.org
Fixes: 82a823833f ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-02-14 11:41:03 -06:00
Dmitry Baryshkov
720e0d91c9 PCI: qcom: Add SM8350 support
Add support for the PCIe host on Qualcomm SM8350 platform.

Link: https://lore.kernel.org/r/20221118233242.2904088-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
2023-02-14 11:41:03 -06:00
Manivannan Sadhasivam
c2cc5cdda4
PCI: tegra194: Move dw_pcie_ep_linkup() to threaded IRQ handler
dw_pcie_ep_linkup() may take more time to execute depending on the EPF
driver implementation. Calling this API in the hard IRQ handler is not
encouraged since the hard IRQ handlers are supposed to complete quickly.

So move the dw_pcie_ep_linkup() call to threaded IRQ handler.

Link: https://lore.kernel.org/linux-pci/20230124071158.5503-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
2023-02-14 07:26:56 +09:00
Manivannan Sadhasivam
da87d35a6e
PCI: dra7xx: Use threaded IRQ handler for "dra7xx-pcie-main" IRQ
The "dra7xx-pcie-main" hard IRQ handler is just printing the IRQ status
and calling the dw_pcie_ep_linkup() API if LINK_UP status is set. But the
execution of dw_pcie_ep_linkup() depends on the EPF driver and may take
more time depending on the EPF implementation.

In general, hard IRQ handlers are supposed to return quickly and not block
for so long. Moreover, there is no real need of the current IRQ handler to
be a hard IRQ handler. So switch to the threaded IRQ handler for the
"dra7xx-pcie-main" IRQ.

Link: https://lore.kernel.org/linux-pci/20230124071158.5503-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2023-02-14 07:26:45 +09:00
Huacai Chen
c768f8c5f4 PCI: loongson: Add more devices that need MRRS quirk
Loongson-2K SOC and LS7A2000 chipset add new PCI IDs that need MRRS
quirk.  Add them.

Link: https://lore.kernel.org/r/20230211023321.3530080-1-chenhuacai@loongson.cn
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-02-13 15:29:27 -06:00
Pali Rohár
b3574f579e PCI: mvebu: Mark driver as BROKEN
People are reporting that pci-mvebu.c driver does not work with recent
mainline kernel. There are more bugs which prevents its for daily usage.
So lets mark it as broken for now, until somebody would be able to fix it
in mainline kernel.

Link: https://lore.kernel.org/r/20230114164125.1298-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-02-09 10:01:30 +01:00
Sergio Paracuellos
0cb2a8f345 PCI: mt7621: Delay phy ports initialization
Some devices like ZBT WE1326 and ZBT WF3526-P and some Netgear models need
to delay phy port initialization after calling the mt7621_pcie_init_port()
driver function to get into reliable boots for both warm and hard resets.

The delay required to detect the ports seems to be in the range [75-100]
milliseconds.

If the ports are not detected the controller is not functional.

There is no datasheet or something similar to really understand why this
extra delay is needed only for these devices and it is not for most of
the boards that are built on mt7621 SoC.

This issue has been reported by openWRT community and the complete
discussion is in [0]. The 100 milliseconds delay has been tested in all
devices to validate it.

Add the extra 100 milliseconds delay to fix the issue.

[0]: https://github.com/openwrt/openwrt/pull/11220

Link: https://lore.kernel.org/r/20221231074041.264738-1-sergio.paracuellos@gmail.com
Fixes: 2bdd5238e7 ("PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-02-03 10:16:40 +01:00
Geert Uytterhoeven
a80becc56d PCI: tegra: Convert to devm_of_phy_optional_get()
Use the new devm_of_phy_optional_get() helper instead of open-coding the
same operation.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/56508eeadf7fa8692877e872871f10294d48c49d.1674584626.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-03 11:19:35 +05:30
Paul E. McKenney
a8f0ff9185 drivers/pci/controller: Remove "select SRCU"
Now that the SRCU Kconfig option is unconditionally selected, there is
no longer any point in selecting it.  Therefore, remove the "select SRCU"
Kconfig statements.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: "Krzysztof Wilczyński" <kw@linux.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: <linux-pci@vger.kernel.org>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
2023-02-02 16:26:06 -08:00
David E. Box
f492edb40b PCI: vmd: Add quirk to configure PCIe ASPM and LTR
PCIe ports reserved for VMD use are not visible to BIOS and therefore not
configured to enable PCIe ASPM or LTR values (which BIOS will configure if
they are not set). Lack of this programming results in high power
consumption on laptops as reported in bugzilla.  For affected products use
pci_enable_link_state to set the allowed link states for devices on the
root ports. Also set the LTR value to the maximum value needed for the SoC.

This is a workaround for products from Rocket Lake through Alder Lake.
Raptor Lake, the latest product at this time, has already implemented LTR
configuring in BIOS. Future products will move ASPM configuration back to
BIOS as well.  As this solution is intended for laptops, support is not
added for hotplug or for devices downstream of a switch on the root port.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=212355
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215063
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213717

Link: https://lore.kernel.org/r/20230120031522.2304439-5-david.e.box@linux.intel.com
Signed-off-by: Michael Bottini <michael.a.bottini@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jon Derrick <jonathan.derrick@linux.dev>
Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2023-02-02 16:02:40 +01:00
David E. Box
14d2079af6 PCI: vmd: Create feature grouping for client products
Simplify the device ID list by creating a grouping of features shared by
client products.

Suggested-by: Jon Derrick <jonathan.derrick@linux.dev>
Link: https://lore.kernel.org/r/20230120031522.2304439-4-david.e.box@linux.intel.com
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2023-02-02 16:02:34 +01:00
David E. Box
cca0dfecdb PCI: vmd: Use PCI_VDEVICE in device list
Use PCI_VDEVICE to simplify the device table.

Link: https://lore.kernel.org/r/20230120031522.2304439-3-david.e.box@linux.intel.com
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jon Derrick <jonathan.derrick@linux.dev>
Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2023-02-02 16:01:57 +01:00
Huacai Chen
8b3517f88f PCI: loongson: Prevent LS7A MRRS increases
Except for isochronous-configured devices, software may set
Max_Read_Request_Size (MRRS) to any value up to 4096.  If a device issues a
read request with size greater than the completer's Max_Payload_Size (MPS),
the completer is required to break the response into multiple completions.

Instead of correctly responding with multiple completions to a large read
request, some LS7A Root Ports respond with a Completer Abort.  To prevent
this, the MRRS must be limited to an implementation-specific value.

The OS cannot detect that value, so rely on BIOS to configure MRRS before
booting, and quirk the Root Ports so we never set an MRRS larger than that
BIOS value for any downstream device.

N.B. Hot-added devices are not configured by BIOS, and they power up with
MRRS = 512 bytes, so these devices will be limited to 512 bytes.  If the
LS7A limit is smaller, those hot-added devices may not work correctly, but
per [1], hotplug is not supported with this chipset revision.

[1] https://lore.kernel.org/r/073638a7-ae68-2847-ac3d-29e5e760d6af@loongson.cn

[bhelgaas: commit log]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216884
Link: https://lore.kernel.org/r/20230201043018.778499-3-chenhuacai@loongson.cn
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-02-01 12:49:29 -06:00
Dawei Li
96ec293962 Drivers: hv: Make remove callback of hyperv driver void returned
Since commit fc7a6209d5 ("bus: Make remove callback return
void") forces bus_type::remove be void-returned, it doesn't
make much sense for any bus based driver implementing remove
callbalk to return non-void to its caller.

As such, change the remove function for Hyper-V VMBus based
drivers to return void.

Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Link: https://lore.kernel.org/r/TYCP286MB2323A93C55526E4DF239D3ACCAFA9@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-01-17 13:41:27 +00:00
Richard Zhu
c435669a41 PCI: imx6: Add i.MX8MP PCIe EP support
Add the i.MX8MP PCIe EP support.

Link: https://lore.kernel.org/r/1673847684-31893-15-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-01-16 10:41:59 +01:00
Richard Zhu
fb3217e2cf PCI: imx6: Add i.MX8MM PCIe EP support
Add i.MX8MM PCIe EP support.

Link: https://lore.kernel.org/r/1673847684-31893-14-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-01-16 10:41:59 +01:00
Richard Zhu
530ba41250 PCI: imx6: Add i.MX8MQ PCIe EP support
Add i.MX8MQ PCIe EP support.

Link: https://lore.kernel.org/r/1673847684-31893-13-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-01-16 10:41:59 +01:00
Richard Zhu
75c2f26da0 PCI: imx6: Add i.MX PCIe EP mode support
i.MX PCIe is one dual mode PCIe controller.

Add i.MX PCIe EP mode support here, and split the PCIe modes to the Root
Complex mode and Endpoint mode.

Link: https://lore.kernel.org/r/1673847684-31893-12-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-01-16 10:41:59 +01:00
Lukas Bulwahn
760d560f71 PCI: dwc: Adjust to recent removal of PCI_MSI_IRQ_DOMAIN
a474d3fbe2 ("PCI/MSI: Get rid of PCI_MSI_IRQ_DOMAIN") removed
PCI_MSI_IRQ_DOMAIN and changed all references to refer to PCI_MSI instead.

ba6ed462dc ("PCI: dwc: Add Baikal-T1 PCIe controller support")
independently added PCIE_BT1, depending on PCI_MSI_IRQ_DOMAIN.

Both commits appeared in v6.2-rc1, so the latter missed the conversion from
PCI_MSI_IRQ_DOMAIN to PCI_MSI.  Update PCIE_BT1 to depend on PCI_MSI
instead.

[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20221215103452.23131-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2023-01-04 06:06:52 -06:00
Linus Torvalds
e79041113b phy-for-6.2
- New support:
         - Allwinner H616 USB PHY and A100 DPHY support
         - TI J721s2, J784s4 and J721e support
 	- Freescale i.MX8MP PCIe PHY support
 	- New driver for Renesas Ethernet SERDES supporting R-Car S4-8
 	- Qualcomm SM8450 PCIe1 PHY support in EP mode
 
   - Updates:
         - again a big pile of updates on qcom-qmp-* drivers following the
           driver split and reorganization merged earlier
 	- Phy order of API calls documentation update
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmOfIbYACgkQfBQHDyUj
 g0fSbw//Rgfk+owGLWyJ3PxRXiDhZaJdBUQNuZEe46TjGKKHvWLJ4+ig6vrXlPgr
 8mVte7jEMZubO7YE/1Vifv9xiFmjo+5R4//WlfkIwy/0SFR8+N+DPQiGU7i7ecov
 uzkFN26qsi4aQrKmxyadGJQzHipaLViBkr6fqfuFcmyDiFII0FoVa/mV7ZQlFtl3
 cDv3leFnp3HQ9mr/mKhOSmbyWCEQHqQvjDwB50R915WfH9PLV2jYddfO4Cbwpr4r
 7m7wX2EiFlQ1o2gwcFQdLiDkA8YL9Kw3wOChpbcCu4gOapJ+GWqCk0AqS9m8MMWF
 HnyAyHw3NxDagwV6sN19Xxa7XgkPJZPn6/92BfGYeD6H5gxmYwdROeU2/x6Qt1+z
 scTl1m6z8X9WWwjnWK1cqVqBPUXoJJ2smym6VBHh3f4AJAVmwZy+yyk1Oar5qa2M
 yDWV7nIRJQmXnuQ+XsG5rmXmmMwOuBgng4NsNX9PjhdVy6/1FUOJuMCr8ldPLAkG
 Lpg+GN8w6tn2G0bxrHzWeAOytxjK5XuXch99BHmXDl+NgIpp/6DuyddXmvG4nrvk
 R6eDv86UOQgGP2h7SujUm9f6RIWb3nJrYN27r+IHK/z5LjSMfylSSu13GvMjZkt4
 Et5Q4Wk9MomHFQkhiTGTd9WlSvb497RgzKhBhMg/lJoSyTi9Eew=
 =4HRP
 -----END PGP SIGNATURE-----

Merge tag 'phy-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

Pull phy updates from Vinod Koul:
 "This tme we have again a big pile of qcom-qmp-* changes, one new
  driver and bunch of new hardware support.

  New hardware support:

   - Allwinner H616 USB PHY and A100 DPHY support

   - TI J721s2, J784s4 and J721e support

   - Freescale i.MX8MP PCIe PHY support

   - New driver for Renesas Ethernet SERDES supporting R-Car S4-8

   - Qualcomm SM8450 PCIe1 PHY support in EP mode

   - Qualcomm SC8280XP PCIe PHY support (including x4 mode)

   - Fixed Qualcomm SC8280XP USB4-USB3-DP PHY DT bindings

  Updates:

   - A big pile of updates on qcom-qmp-* drivers following the driver
     split and reorganization merged earlier

   - Phy order of API calls documentation update"

* tag 'phy-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (174 commits)
  phy: ti: phy-j721e-wiz: add j721s2-wiz-10g module support
  dt-bindings: phy-j721e-wiz: add j721s2 compatible string
  phy: use devm_platform_get_and_ioremap_resource()
  phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY variant
  phy: allwinner: phy-sun6i-mipi-dphy: Add a variant power-on hook
  phy: allwinner: phy-sun6i-mipi-dphy: Set the enable bit last
  phy: allwinner: phy-sun6i-mipi-dphy: Make RX support optional
  dt-bindings: sun6i-a31-mipi-dphy: Add the A100 DPHY variant
  dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property
  phy: qcom-qmp-pcie: drop redundant clock allocation
  phy: qcom-qmp-usb: drop redundant clock allocation
  phy: qcom-qmp: drop unused type header
  phy: qcom-qmp-usb: drop sc8280xp reference-clock source
  dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: drop reference-clock source
  phy: qcom-qmp-combo: add support for updated sc8280xp binding
  phy: qcom-qmp-combo: rename DP_PHY register pointer
  phy: qcom-qmp-combo: rename common-register pointers
  phy: qcom-qmp-combo: clean up DP clock callbacks
  phy: qcom-qmp-combo: separate clock and provider registration
  phy: qcom-qmp-combo: add clock registration helper
  ...
2022-12-19 08:40:58 -06:00
Linus Torvalds
c7020e1b34 pci-v6.2-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmOYpTIUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vxuZhAAhGjE8voLZeOYwxbvfL69hGTAZ+Me
 x2hqRWVhh/IGWXTTaoSLwSjMMokcmAKN5S/wv8qdCG5sB8EN8FyTBIZDy8PuRRdl
 8UlqlBMSL+d4oSRDCnYLxFNcynLRNnmx2dfcdw9tJ4zjTLN8Y4o8PHFogR6pJ3MT
 sDC8S0myTQKXr4wAGzTZycKsiGManviYtByp6dCcKD3Oy5Q2uZ9OKO2DP2yQpn+F
 c3IJSV9oDz3KR8JVJ5Q1iz9cdMXbGwjkM3JLlHpxhedwjN4ErLumPutKcebtzO5C
 aTqabN7Nnzc4yJusAIfojFCWH7fgaYUyJ3pxcFyJ4tu4m9Last+2I5UB/kV2sYAD
 jWiCYx3sA/mRopNXOnrBGae+Lgy+sQnt8or0grySr0bK+b+ArAGis4uT4A0uASGO
 RUQdIQwz7zhHeQrwAladHWxnx4BEDNCatgfn38p4fklIYKydCY5nfZURMDvHezSR
 G6Nu08hoE9ZXlmkWTFw+5F23wPWKcCpzZj0hf7OroIouXUp8vqSFSqatH5vGkbCl
 bDswck9GdRJ2hl5SvFOeelaXkM42du45TMLU2JmIn6dYYFNrO93JgdvKSU7E2CpG
 AmDIpg1Idxo8fEPPGH1I7RVU5+ilzmmPQQY7poQW+va4/dEd/QVp1+ZZTDnMC1qk
 qi3ck22VdvPU2VU=
 =KULr
 -----END PGP SIGNATURE-----

Merge tag 'pci-v6.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Squash portdrv_{core,pci}.c into portdrv.c to ease maintenance and
     make more things static.

   - Make portdrv bind to Switch Ports that have AER. Previously, if
     these Ports lacked MSI/MSI-X, portdrv failed to bind, which meant
     the Ports couldn't be suspended to low-power states. AER on these
     Ports doesn't use interrupts, and the AER driver doesn't need to
     claim them.

   - Assign PCI domain IDs using ida_alloc(), which makes host bridge
     add/remove work better.

  Resource management:

   - To work better with recent BIOSes that use EfiMemoryMappedIO for
     PCI host bridge apertures, remove those regions from the E820 map
     (E820 entries normally prevent us from allocating BARs). In v5.19,
     we added some quirks to disable E820 checking, but that's not very
     maintainable. EfiMemoryMappedIO means the OS needs to map the
     region for use by EFI runtime services; it shouldn't prevent OS
     from using it.

  PCIe native device hotplug:

   - Build pciehp by default if USB4 is enabled, since Thunderbolt/USB4
     PCIe tunneling depends on native PCIe hotplug.

   - Enable Command Completed Interrupt only if supported to avoid user
     confusion from lspci output that says this is enabled but not
     supported.

   - Prevent pciehp from binding to Switch Upstream Ports; this happened
     because of interaction with acpiphp and caused devices below the
     Upstream Port to disappear.

  Power management:

   - Convert AGP drivers to generic power management. We hope to remove
     legacy power management from the PCI core eventually.

  Virtualization:

   - Fix pci_device_is_present(), which previously always returned
     "false" for VFs, causing virtio hangs when unbinding the driver.

  Miscellaneous:

   - Convert drivers to gpiod API to prepare for dropping some legacy
     code.

   - Fix DOE fencepost error for the maximum data object length.

  Baikal-T1 PCIe controller driver:

   - Add driver and DT bindings.

  Broadcom STB PCIe controller driver:

   - Enable Multi-MSI.

   - Delay 100ms after PERST# deassert to allow power and clocks to
     stabilize.

   - Configure Read Completion Boundary to 64 bytes.

  Freescale i.MX6 PCIe controller driver:

   - Initialize PHY before deasserting core reset to fix a regression in
     v6.0 on boards where the PHY provides the reference.

   - Fix imx6sx and imx8mq clock names in DT schema.

  Intel VMD host bridge driver:

   - Fix Secondary Bus Reset on VMD bridges, which allows reset of NVMe
     SSDs in VT-d pass-through scenarios.

   - Disable MSI remapping, which gets re-enabled by firmware during
     suspend/resume.

  MediaTek PCIe Gen3 controller driver:

   - Add MT7986 and MT8195 support.

  Qualcomm PCIe controller driver:

   - Add SC8280XP/SA8540P basic interconnect support.

  Rockchip DesignWare PCIe controller driver:

   - Base DT schema on common Synopsys schema.

  Synopsys DesignWare PCIe core:

   - Collect DT items shared between Root Port and Endpoint (PERST GPIO,
     PHY info, clocks, resets, link speed, number of lanes, number of
     iATU windows, interrupt info, etc) to snps,dw-pcie-common.yaml.

   - Add dma-ranges support for Root Ports and Endpoints.

   - Consolidate DT resource retrieval for "dbi", "dbi2", "atu", etc. to
     reduce code duplication.

   - Add generic names for clocks and resets to encourage more
     consistent naming across drivers using DesignWare IP.

   - Stop advertising PTM Responder role for Endpoints, which aren't
     allowed to be responders.

  TI J721E PCIe driver:

   - Add j721s2 host mode ID to DT schema.

   - Add interrupt properties to DT schema.

  Toshiba Visconti PCIe controller driver:

   - Fix interrupts array max constraints in DT schema"

* tag 'pci-v6.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (95 commits)
  x86/PCI: Use pr_info() when possible
  x86/PCI: Fix log message typo
  x86/PCI: Tidy E820 removal messages
  PCI: Skip allocate_resource() if too little space available
  efi/x86: Remove EfiMemoryMappedIO from E820 map
  PCI/portdrv: Allow AER service only for Root Ports & RCECs
  PCI: xilinx-nwl: Fix coding style violations
  PCI: mvebu: Switch to using gpiod API
  PCI: pciehp: Enable Command Completed Interrupt only if supported
  PCI: aardvark: Switch to using devm_gpiod_get_optional()
  dt-bindings: PCI: mediatek-gen3: add support for mt7986
  dt-bindings: PCI: mediatek-gen3: add SoC based clock config
  dt-bindings: PCI: qcom: Allow 'dma-coherent' property
  PCI: mt7621: Add sentinel to quirks table
  PCI: vmd: Fix secondary bus reset for Intel bridges
  PCI: endpoint: pci-epf-vntb: Fix sparse ntb->reg build warning
  PCI: endpoint: pci-epf-vntb: Fix sparse build warning for epf_db
  PCI: endpoint: pci-epf-vntb: Replace hardcoded 4 with sizeof(u32)
  PCI: endpoint: pci-epf-vntb: Remove unused epf_db_phy struct member
  PCI: endpoint: pci-epf-vntb: Fix call pci_epc_mem_free_addr() in error path
  ...
2022-12-14 09:54:10 -08:00
Linus Torvalds
9d33edb20f Updates for the interrupt core and driver subsystem:
- Core:
 
    The bulk is the rework of the MSI subsystem to support per device MSI
    interrupt domains. This solves conceptual problems of the current
    PCI/MSI design which are in the way of providing support for PCI/MSI[-X]
    and the upcoming PCI/IMS mechanism on the same device.
 
    IMS (Interrupt Message Store] is a new specification which allows device
    manufactures to provide implementation defined storage for MSI messages
    contrary to the uniform and specification defined storage mechanisms for
    PCI/MSI and PCI/MSI-X. IMS not only allows to overcome the size limitations
    of the MSI-X table, but also gives the device manufacturer the freedom to
    store the message in arbitrary places, even in host memory which is shared
    with the device.
 
    There have been several attempts to glue this into the current MSI code,
    but after lengthy discussions it turned out that there is a fundamental
    design problem in the current PCI/MSI-X implementation. This needs some
    historical background.
 
    When PCI/MSI[-X] support was added around 2003, interrupt management was
    completely different from what we have today in the actively developed
    architectures. Interrupt management was completely architecture specific
    and while there were attempts to create common infrastructure the
    commonalities were rudimentary and just providing shared data structures and
    interfaces so that drivers could be written in an architecture agnostic
    way.
 
    The initial PCI/MSI[-X] support obviously plugged into this model which
    resulted in some basic shared infrastructure in the PCI core code for
    setting up MSI descriptors, which are a pure software construct for holding
    data relevant for a particular MSI interrupt, but the actual association to
    Linux interrupts was completely architecture specific. This model is still
    supported today to keep museum architectures and notorious stranglers
    alive.
 
    In 2013 Intel tried to add support for hot-pluggable IO/APICs to the kernel,
    which was creating yet another architecture specific mechanism and resulted
    in an unholy mess on top of the existing horrors of x86 interrupt handling.
    The x86 interrupt management code was already an incomprehensible maze of
    indirections between the CPU vector management, interrupt remapping and the
    actual IO/APIC and PCI/MSI[-X] implementation.
 
    At roughly the same time ARM struggled with the ever growing SoC specific
    extensions which were glued on top of the architected GIC interrupt
    controller.
 
    This resulted in a fundamental redesign of interrupt management and
    provided the today prevailing concept of hierarchical interrupt
    domains. This allowed to disentangle the interactions between x86 vector
    domain and interrupt remapping and also allowed ARM to handle the zoo of
    SoC specific interrupt components in a sane way.
 
    The concept of hierarchical interrupt domains aims to encapsulate the
    functionality of particular IP blocks which are involved in interrupt
    delivery so that they become extensible and pluggable. The X86
    encapsulation looks like this:
 
                                             |--- device 1
      [Vector]---[Remapping]---[PCI/MSI]--|...
                                             |--- device N
 
    where the remapping domain is an optional component and in case that it is
    not available the PCI/MSI[-X] domains have the vector domain as their
    parent. This reduced the required interaction between the domains pretty
    much to the initialization phase where it is obviously required to
    establish the proper parent relation ship in the components of the
    hierarchy.
 
    While in most cases the model is strictly representing the chain of IP
    blocks and abstracting them so they can be plugged together to form a
    hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the hardware
    it's clear that the actual PCI/MSI[-X] interrupt controller is not a global
    entity, but strict a per PCI device entity.
 
    Here we took a short cut on the hierarchical model and went for the easy
    solution of providing "global" PCI/MSI domains which was possible because
    the PCI/MSI[-X] handling is uniform across the devices. This also allowed
    to keep the existing PCI/MSI[-X] infrastructure mostly unchanged which in
    turn made it simple to keep the existing architecture specific management
    alive.
 
    A similar problem was created in the ARM world with support for IP block
    specific message storage. Instead of going all the way to stack a IP block
    specific domain on top of the generic MSI domain this ended in a construct
    which provides a "global" platform MSI domain which allows overriding the
    irq_write_msi_msg() callback per allocation.
 
    In course of the lengthy discussions we identified other abuse of the MSI
    infrastructure in wireless drivers, NTB etc. where support for
    implementation specific message storage was just mindlessly glued into the
    existing infrastructure. Some of this just works by chance on particular
    platforms but will fail in hard to diagnose ways when the driver is used
    on platforms where the underlying MSI interrupt management code does not
    expect the creative abuse.
 
    Another shortcoming of today's PCI/MSI-X support is the inability to
    allocate or free individual vectors after the initial enablement of
    MSI-X. This results in an works by chance implementation of VFIO (PCI
    pass-through) where interrupts on the host side are not set up upfront to
    avoid resource exhaustion. They are expanded at run-time when the guest
    actually tries to use them. The way how this is implemented is that the
    host disables MSI-X and then re-enables it with a larger number of
    vectors again. That works by chance because most device drivers set up
    all interrupts before the device actually will utilize them. But that's
    not universally true because some drivers allocate a large enough number
    of vectors but do not utilize them until it's actually required,
    e.g. for acceleration support. But at that point other interrupts of the
    device might be in active use and the MSI-X disable/enable dance can
    just result in losing interrupts and therefore hard to diagnose subtle
    problems.
 
    Last but not least the "global" PCI/MSI-X domain approach prevents to
    utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact that IMS
    is not longer providing a uniform storage and configuration model.
 
    The solution to this is to implement the missing step and switch from
    global PCI/MSI domains to per device PCI/MSI domains. The resulting
    hierarchy then looks like this:
 
                               |--- [PCI/MSI] device 1
      [Vector]---[Remapping]---|...
                               |--- [PCI/MSI] device N
 
    which in turn allows to provide support for multiple domains per device:
 
                               |--- [PCI/MSI] device 1
                               |--- [PCI/IMS] device 1
      [Vector]---[Remapping]---|...
                               |--- [PCI/MSI] device N
                               |--- [PCI/IMS] device N
 
    This work converts the MSI and PCI/MSI core and the x86 interrupt
    domains to the new model, provides new interfaces for post-enable
    allocation/free of MSI-X interrupts and the base framework for PCI/IMS.
    PCI/IMS has been verified with the work in progress IDXD driver.
 
    There is work in progress to convert ARM over which will replace the
    platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
    "solutions" are in the works as well.
 
  - Drivers:
 
    - Updates for the LoongArch interrupt chip drivers
 
    - Support for MTK CIRQv2
 
    - The usual small fixes and updates all over the place
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmOUsygTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoYXiD/40tXKzCzf0qFIqUlZLia1N3RRrwrNC
 DVTixuLtR9MrjwE+jWLQILa85SHInV8syXHSd35SzhsGDxkURFGi+HBgVWmysODf
 br9VSh3Gi+kt7iXtIwAg8WNWviGNmS3kPksxCko54F0YnJhMY5r5bhQVUBQkwFG2
 wES1C9Uzd4pdV2bl24Z+WKL85cSmZ+pHunyKw1n401lBABXnTF9c4f13zC14jd+y
 wDxNrmOxeL3mEH4Pg6VyrDuTOURSf3TjJjeEq3EYqvUo0FyLt9I/cKX0AELcZQX7
 fkRjrQQAvXNj39RJfeSkojDfllEPUHp7XSluhdBu5aIovSamdYGCDnuEoZ+l4MJ+
 CojIErp3Dwj/uSaf5c7C3OaDAqH2CpOFWIcrUebShJE60hVKLEpUwd6W8juplaoT
 gxyXRb1Y+BeJvO8VhMN4i7f3232+sj8wuj+HTRTTbqMhkElnin94tAx8rgwR1sgR
 BiOGMJi4K2Y8s9Rqqp0Dvs01CW4guIYvSR4YY+WDbbi1xgiev89OYs6zZTJCJe4Y
 NUwwpqYSyP1brmtdDdBOZLqegjQm+TwUb6oOaasFem4vT1swgawgLcDnPOx45bk5
 /FWt3EmnZxMz99x9jdDn1+BCqAZsKyEbEY1avvhPVMTwoVIuSX2ceTBMLseGq+jM
 03JfvdxnueM3gw==
 =9erA
 -----END PGP SIGNATURE-----

Merge tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq updates from Thomas Gleixner:
 "Updates for the interrupt core and driver subsystem:

  The bulk is the rework of the MSI subsystem to support per device MSI
  interrupt domains. This solves conceptual problems of the current
  PCI/MSI design which are in the way of providing support for
  PCI/MSI[-X] and the upcoming PCI/IMS mechanism on the same device.

  IMS (Interrupt Message Store] is a new specification which allows
  device manufactures to provide implementation defined storage for MSI
  messages (as opposed to PCI/MSI and PCI/MSI-X that has a specified
  message store which is uniform accross all devices). The PCI/MSI[-X]
  uniformity allowed us to get away with "global" PCI/MSI domains.

  IMS not only allows to overcome the size limitations of the MSI-X
  table, but also gives the device manufacturer the freedom to store the
  message in arbitrary places, even in host memory which is shared with
  the device.

  There have been several attempts to glue this into the current MSI
  code, but after lengthy discussions it turned out that there is a
  fundamental design problem in the current PCI/MSI-X implementation.
  This needs some historical background.

  When PCI/MSI[-X] support was added around 2003, interrupt management
  was completely different from what we have today in the actively
  developed architectures. Interrupt management was completely
  architecture specific and while there were attempts to create common
  infrastructure the commonalities were rudimentary and just providing
  shared data structures and interfaces so that drivers could be written
  in an architecture agnostic way.

  The initial PCI/MSI[-X] support obviously plugged into this model
  which resulted in some basic shared infrastructure in the PCI core
  code for setting up MSI descriptors, which are a pure software
  construct for holding data relevant for a particular MSI interrupt,
  but the actual association to Linux interrupts was completely
  architecture specific. This model is still supported today to keep
  museum architectures and notorious stragglers alive.

  In 2013 Intel tried to add support for hot-pluggable IO/APICs to the
  kernel, which was creating yet another architecture specific mechanism
  and resulted in an unholy mess on top of the existing horrors of x86
  interrupt handling. The x86 interrupt management code was already an
  incomprehensible maze of indirections between the CPU vector
  management, interrupt remapping and the actual IO/APIC and PCI/MSI[-X]
  implementation.

  At roughly the same time ARM struggled with the ever growing SoC
  specific extensions which were glued on top of the architected GIC
  interrupt controller.

  This resulted in a fundamental redesign of interrupt management and
  provided the today prevailing concept of hierarchical interrupt
  domains. This allowed to disentangle the interactions between x86
  vector domain and interrupt remapping and also allowed ARM to handle
  the zoo of SoC specific interrupt components in a sane way.

  The concept of hierarchical interrupt domains aims to encapsulate the
  functionality of particular IP blocks which are involved in interrupt
  delivery so that they become extensible and pluggable. The X86
  encapsulation looks like this:

                                            |--- device 1
     [Vector]---[Remapping]---[PCI/MSI]--|...
                                            |--- device N

  where the remapping domain is an optional component and in case that
  it is not available the PCI/MSI[-X] domains have the vector domain as
  their parent. This reduced the required interaction between the
  domains pretty much to the initialization phase where it is obviously
  required to establish the proper parent relation ship in the
  components of the hierarchy.

  While in most cases the model is strictly representing the chain of IP
  blocks and abstracting them so they can be plugged together to form a
  hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the
  hardware it's clear that the actual PCI/MSI[-X] interrupt controller
  is not a global entity, but strict a per PCI device entity.

  Here we took a short cut on the hierarchical model and went for the
  easy solution of providing "global" PCI/MSI domains which was possible
  because the PCI/MSI[-X] handling is uniform across the devices. This
  also allowed to keep the existing PCI/MSI[-X] infrastructure mostly
  unchanged which in turn made it simple to keep the existing
  architecture specific management alive.

  A similar problem was created in the ARM world with support for IP
  block specific message storage. Instead of going all the way to stack
  a IP block specific domain on top of the generic MSI domain this ended
  in a construct which provides a "global" platform MSI domain which
  allows overriding the irq_write_msi_msg() callback per allocation.

  In course of the lengthy discussions we identified other abuse of the
  MSI infrastructure in wireless drivers, NTB etc. where support for
  implementation specific message storage was just mindlessly glued into
  the existing infrastructure. Some of this just works by chance on
  particular platforms but will fail in hard to diagnose ways when the
  driver is used on platforms where the underlying MSI interrupt
  management code does not expect the creative abuse.

  Another shortcoming of today's PCI/MSI-X support is the inability to
  allocate or free individual vectors after the initial enablement of
  MSI-X. This results in an works by chance implementation of VFIO (PCI
  pass-through) where interrupts on the host side are not set up upfront
  to avoid resource exhaustion. They are expanded at run-time when the
  guest actually tries to use them. The way how this is implemented is
  that the host disables MSI-X and then re-enables it with a larger
  number of vectors again. That works by chance because most device
  drivers set up all interrupts before the device actually will utilize
  them. But that's not universally true because some drivers allocate a
  large enough number of vectors but do not utilize them until it's
  actually required, e.g. for acceleration support. But at that point
  other interrupts of the device might be in active use and the MSI-X
  disable/enable dance can just result in losing interrupts and
  therefore hard to diagnose subtle problems.

  Last but not least the "global" PCI/MSI-X domain approach prevents to
  utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact
  that IMS is not longer providing a uniform storage and configuration
  model.

  The solution to this is to implement the missing step and switch from
  global PCI/MSI domains to per device PCI/MSI domains. The resulting
  hierarchy then looks like this:

                              |--- [PCI/MSI] device 1
     [Vector]---[Remapping]---|...
                              |--- [PCI/MSI] device N

  which in turn allows to provide support for multiple domains per
  device:

                              |--- [PCI/MSI] device 1
                              |--- [PCI/IMS] device 1
     [Vector]---[Remapping]---|...
                              |--- [PCI/MSI] device N
                              |--- [PCI/IMS] device N

  This work converts the MSI and PCI/MSI core and the x86 interrupt
  domains to the new model, provides new interfaces for post-enable
  allocation/free of MSI-X interrupts and the base framework for
  PCI/IMS. PCI/IMS has been verified with the work in progress IDXD
  driver.

  There is work in progress to convert ARM over which will replace the
  platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
  "solutions" are in the works as well.

  Drivers:

   - Updates for the LoongArch interrupt chip drivers

   - Support for MTK CIRQv2

   - The usual small fixes and updates all over the place"

* tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (134 commits)
  irqchip/ti-sci-inta: Fix kernel doc
  irqchip/gic-v2m: Mark a few functions __init
  irqchip/gic-v2m: Include arm-gic-common.h
  irqchip/irq-mvebu-icu: Fix works by chance pointer assignment
  iommu/amd: Enable PCI/IMS
  iommu/vt-d: Enable PCI/IMS
  x86/apic/msi: Enable PCI/IMS
  PCI/MSI: Provide pci_ims_alloc/free_irq()
  PCI/MSI: Provide IMS (Interrupt Message Store) support
  genirq/msi: Provide constants for PCI/IMS support
  x86/apic/msi: Enable MSI_FLAG_PCI_MSIX_ALLOC_DYN
  PCI/MSI: Provide post-enable dynamic allocation interfaces for MSI-X
  PCI/MSI: Provide prepare_desc() MSI domain op
  PCI/MSI: Split MSI-X descriptor setup
  genirq/msi: Provide MSI_FLAG_MSIX_ALLOC_DYN
  genirq/msi: Provide msi_domain_alloc_irq_at()
  genirq/msi: Provide msi_domain_ops:: Prepare_desc()
  genirq/msi: Provide msi_desc:: Msi_data
  genirq/msi: Provide struct msi_map
  x86/apic/msi: Remove arch_create_remap_msi_irq_domain()
  ...
2022-12-12 11:21:29 -08:00
Bjorn Helgaas
f826afe5ea Merge branch 'pci/kbuild'
- Remove unnecessary <linux/of_irq.h> includes (Bjorn Helgaas)

* pci/kbuild:
  PCI: Drop of_match_ptr() to avoid unused variables
  PCI: Remove unnecessary <linux/of_irq.h> includes
  PCI: xgene-msi: Include <linux/irqdomain.h> explicitly
  PCI: mvebu: Include <linux/irqdomain.h> explicitly
  PCI: microchip: Include <linux/irqdomain.h> explicitly
  PCI: altera-msi: Include <linux/irqdomain.h> explicitly

# Conflicts:
#	drivers/pci/controller/pci-mvebu.c
2022-12-10 10:36:52 -06:00
Bjorn Helgaas
e4d741e9e4 Merge branch 'pci/ctrl/xilinx'
- Fix whitespace issues (Michal Simek)

* pci/ctrl/xilinx:
  PCI: xilinx-nwl: Fix coding style violations
2022-12-10 10:36:42 -06:00
Bjorn Helgaas
4e5194733a Merge branch 'pci/ctrl/mvebu'
- Switch to the gpiod API so we can make of_get_named_gpio_flags() private
  (Dmitry Torokhov)

* pci/ctrl/mvebu:
  PCI: mvebu: Switch to using gpiod API
2022-12-10 10:36:41 -06:00
Bjorn Helgaas
0454c6c0ed Merge branch 'pci/ctrl/aardvark'
- Switch to using devm_gpiod_get_optional() so we can stop exporting
  devm_gpiod_get_from_of_node() (Dmitry Torokhov)

* pci/ctrl/aardvark:
  PCI: aardvark: Switch to using devm_gpiod_get_optional()
2022-12-10 10:36:40 -06:00
Bjorn Helgaas
ba7deaa2a8 Merge branch 'remotes/lorenzo/pci/vmd'
- Restore MSI remapping configuration during resume because the
  configuration is cleared out by firmware when suspending (Nirmal Patel)

- Reset the hierarchy below VMD when probing the VMD; we attempted this
  before, but with the wrong device, so it didn't work (Francisco Munoz)

* remotes/lorenzo/pci/vmd:
  PCI: vmd: Fix secondary bus reset for Intel bridges
  PCI: vmd: Disable MSI remapping after suspend
2022-12-10 10:36:39 -06:00
Bjorn Helgaas
4e5db7983d Merge branch 'remotes/lorenzo/pci/tegra'
- Switch from devm_gpiod_get_from_of_node() to devm_fwnode_gpiod_get()
  (Dmitry Torokhov)

* remotes/lorenzo/pci/tegra:
  PCI: tegra: Switch to using devm_fwnode_gpiod_get
2022-12-10 10:36:39 -06:00
Bjorn Helgaas
008ee711f9 Merge branch 'remotes/lorenzo/pci/qcom'
- Add DT and driver support for SC8280XP/SA8540P basic interconnects where
  interconnect bandwidth must be requested before enabling interconnect
  clocks (Johan Hovold)

- Add 'dma-coherent' property (Johan Hovold)

* remotes/lorenzo/pci/qcom:
  dt-bindings: PCI: qcom: Allow 'dma-coherent' property
  PCI: qcom: Add basic interconnect support
  dt-bindings: PCI: qcom: Add SC8280XP/SA8540P interconnects
2022-12-10 10:36:38 -06:00
Bjorn Helgaas
8ecdba32a5 Merge branch 'remotes/lorenzo/pci/mt7621'
- Add sentinel to mt7621_pcie_quirks_match[] to prevent oops when parsing
  the table (John Thomson)

* remotes/lorenzo/pci/mt7621:
  PCI: mt7621: Add sentinel to quirks table
2022-12-10 10:36:38 -06:00
Bjorn Helgaas
29a3e5aedc Merge branch 'remotes/lorenzo/pci/dwc'
- Fix n_fts[] array overrun (Vidya Sagar)

- Don't advertise PTM Responder role for Endpoints (Vidya Sagar)

- Fix qcom "reset assert" error message (Manivannan Sadhasivam)

- Downgrade "link didn't come up" message to dev_info (Vidya Sagar)

- Initialize PHY before deasserting core reset so the link comes up on
  boards where the PHY provides the reference clock (this was a regression
  in v6.0) (Sascha Hauer)

- Switch histb to the gpiod API (Dmitry Torokhov)

- Fix imx6sx and imx8mq clock names in DT binding (Serge Semin)

- Fix visconti MSI interrupt in DT binding (Serge Semin)

- Consolidate reset-gpio, cdm, windows info in common DT shared by both
  Root Port and Endpoint bindings (Serge Semin)

- Remove bus node from DT examples (Serge Semin)

- Add common phys, phy-names to DT (Serge Semin)

- Add default max-link-speed of Gen5 to DT (Serge Semin)

- Apply generic schema for generic device  (Serge Semin)

- Add default max-functions of 32 to DT (Serge Semin)

- Add common interrupts, interrupt-names to DT (Serge Semin)

- Add common regs, reg-names to DT (Serge Semin)

- Add common clocks, resets to DT (Serge Semin)

- Add dma-coherent to DT (Serge Semin)

- Apply common schema to Rockchip DT (Serge Semin)

- Add Baikal-T1 DT bindings (Serge Semin)

- Add dma-ranges support in DesignWare core (Serge Semin)

- Add dw_pcie_cap_is() for testing controller capabilities (Serge Semin)

- Add generic resources getter to DesignWare core (Serge Semin)

- Combine iATU detection procedures (Serge Semin)

- Add generic clock and reset names to DesignWare core (Serge Semin)

- Add Baikal-T1 PCIe controller driver (Serge Semin)

* remotes/lorenzo/pci/dwc:
  PCI: dwc: Add Baikal-T1 PCIe controller support
  PCI: dwc: Introduce generic platform clocks and resets
  PCI: dwc: Combine iATU detection procedures
  PCI: dwc: Introduce generic resources getter
  PCI: dwc: Introduce generic controller capabilities interface
  PCI: dwc: Introduce dma-ranges property support for RC-host
  dt-bindings: PCI: dwc: Add Baikal-T1 PCIe Root Port bindings
  dt-bindings: PCI: dwc: Apply common schema to Rockchip DW PCIe nodes
  dt-bindings: PCI: dwc: Add dma-coherent property
  dt-bindings: PCI: dwc: Add clocks/resets common properties
  dt-bindings: PCI: dwc: Add reg/reg-names common properties
  dt-bindings: PCI: dwc: Add interrupts/interrupt-names common properties
  dt-bindings: PCI: dwc: Add max-functions EP property
  dt-bindings: PCI: dwc: Apply generic schema for generic device only
  dt-bindings: PCI: dwc: Add max-link-speed common property
  dt-bindings: PCI: dwc: Add phys/phy-names common properties
  dt-bindings: PCI: dwc: Remove bus node from the examples
  dt-bindings: PCI: dwc: Detach common RP/EP DT bindings
  dt-bindings: visconti-pcie: Fix interrupts array max constraints
  dt-bindings: imx6q-pcie: Fix clock names for imx6sx and imx8mq
  PCI: histb: Switch to using gpiod API
  PCI: imx6: Initialize PHY before deasserting core reset
  PCI: dwc: Use dev_info for PCIe link down event logging
  PCI: qcom: Fix error message for reset_control_assert()
  PCI: designware-ep: Disable PTM capabilities for EP mode
  PCI: Add PCI_PTM_CAP_RES macro
  PCI: dwc: Fix n_fts[] array overrun
2022-12-10 10:36:37 -06:00
Michal Simek
c1ddc3dad8 PCI: xilinx-nwl: Fix coding style violations
Fix code alignments and remove additional newline.

Link: https://lore.kernel.org/r/17c75e7003bb8c43a0f45ae3d7c45cac230ef852.1670503129.git.michal.simek@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-12-08 10:50:48 -06:00
Dmitry Torokhov
76007ccc57 PCI: mvebu: Switch to using gpiod API
Switch the driver away from legacy gpio/of_gpio API to gpiod API, and
remove use of of_get_named_gpio_flags() which I want to make private to
gpiolib.

Link: https://lore.kernel.org/r/Y5EAft42YiT66mVj@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-12-07 16:03:03 -06:00
Dmitry Torokhov
7ccb966779 PCI: aardvark: Switch to using devm_gpiod_get_optional()
Switch the driver to the generic version of gpiod API (and away from
OF-specific variant), so that we can stop exporting
devm_gpiod_get_from_of_node().

Link: https://lore.kernel.org/r/Y3KMEZFv6dpxA+Gv@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Pali Rohár <pali@kernel.org>
2022-12-07 08:19:53 -06:00
John Thomson
19098934f9 PCI: mt7621: Add sentinel to quirks table
Current driver is missing a sentinel in the struct soc_device_attribute
array, which causes an oops when assessed by the
soc_device_match(mt7621_pcie_quirks_match) call.

This was only exposed once the CONFIG_SOC_MT7621 mt7621 soc_dev_attr
was fixed to register the SOC as a device, in:

commit 7c18b64bba ("mips: ralink: mt7621: do not use kzalloc too early")

Fix it by adding the required sentinel.

Link: https://lore.kernel.org/lkml/26ebbed1-0fe9-4af9-8466-65f841d0b382@app.fastmail.com
Link: https://lore.kernel.org/r/20221205204645.301301-1-git@johnthomson.fastmail.com.au
Fixes: b483b4e4d3 ("staging: mt7621-pci: add quirks for 'E2' revision using 'soc_device_attribute'")
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
2022-12-06 12:04:23 +01:00
Francisco Munoz
0a584655ef PCI: vmd: Fix secondary bus reset for Intel bridges
The reset was never applied in the current implementation because Intel
Bridges owned by VMD are parentless. Internally, pci_reset_bus() applies
a reset to the parent of the PCI device supplied as argument, but in this
case it failed because there wasn't a parent.

In more detail, this change allows the VMD driver to enumerate NVMe devices
in pass-through configurations when guest reboots are performed. There was
an attempted to fix this, but later we discovered that the code inside
pci_reset_bus() wasn’t triggering secondary bus resets. Therefore, we
updated the parameters passed to it, and now NVMe SSDs attached to VMD
bridges are properly enumerated in VT-d pass-through scenarios.

Link: https://lore.kernel.org/r/20221206001637.4744-1-francisco.munoz.ruiz@linux.intel.com
Fixes: 6aab562229 ("PCI: vmd: Clean up domain before enumeration")
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev>
2022-12-06 11:45:25 +01:00
Olaf Hering
503112f422 PCI: hv: update comment in x86 specific hv_arch_irq_unmask
The function hv_set_affinity was removed in commit 831c1ae7 ("PCI: hv:
Make the code arch neutral by adding arch specific interfaces").

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Link: https://lore.kernel.org/r/20221107171831.25283-1-olaf@aepfle.de
Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-11-28 16:48:20 +00:00
Serge Semin
ba6ed462dc PCI: dwc: Add Baikal-T1 PCIe controller support
Baikal-T1 SoC is equipped with DWC PCIe v4.60a host controller. It can be
trained to work up to Gen.3 speed over up to x4 lanes. The host controller
is attached to the DW PCIe 3.0 PCS via the PIPE-4 interface, which in its
turn is connected to the DWC 10G PHY. The whole system is supposed to be
fed up with four clock sources: DBI peripheral clock, AXI application
clocks and external PHY/core reference clock generating the 100MHz signal.
In addition to that the platform provide a way to reset each part of the
controller: sticky/non-sticky bits, host controller core, PIPE interface,
PCS/PHY and Hot/Power reset signal. The driver also provides a way to
handle the GPIO-based PERST# signal.

Note due to the Baikal-T1 MMIO peculiarity we have to implement the DBI
interface accessors which make sure the IO operations are dword-aligned.

Link: https://lore.kernel.org/r/20221113191301.5526-21-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-11-23 16:01:55 +01:00
Serge Semin
ef69f852a9 PCI: dwc: Introduce generic platform clocks and resets
Currently almost each platform driver uses its own resets and clocks
naming in order to get the corresponding descriptors. It makes the code
harder to maintain and comprehend especially seeing the DWC PCIe core main
resets and clocks signals set hasn't changed much for about at least one
major IP-core release. So in order to organize things around these signals
we suggest to create a generic interface for them in accordance with the
naming introduced in the DWC PCIe IP-core reference manual:

Application clocks:
- "dbi"  - data bus interface clock (on some DWC PCIe platforms it's
           referred as "pclk", "pcie", "sys", "ahb", "cfg", "iface",
           "gio", "reg", "pcie_apb_sys");
- "mstr" - AXI-bus master interface clock (some DWC PCIe glue drivers
           refer to this clock as "port", "bus", "pcie_bus",
           "bus_master/master_bus/axi_m", "pcie_aclk");
- "slv"  - AXI-bus slave interface clock (also called as "port", "bus",
           "pcie_bus", "bus_slave/slave_bus/axi_s", "pcie_aclk",
           "pcie_inbound_axi").

Core clocks:
- "pipe" - core-PCS PIPE interface clock coming from external PHY (it's
           normally named by the platform drivers as just "pipe");
- "core" - primary clock of the controller (none of the platform drivers
           declare such a clock but in accordance with the ref. manual
           the devices may have it separately specified);
- "aux"  - auxiliary PMC domain clock (it is named by some platforms as
           "pcie_aux" and just "aux");
- "ref"  - Generic reference clock (it is a generic clock source, which
           can be used as a signal source for multiple interfaces, some
           platforms call it as "ref", "general", "pcie_phy",
           "pcie_phy_ref").

Application resets:
- "dbi"  - Data-bus interface reset (it's CSR interface clock and is
           normally called as "apb" though technically it's not APB but
           DWC PCIe-specific interface);
- "mstr" - AXI-bus master reset (some platforms call it as "port", "apps",
           "bus", "axi_m");
- "slv"  - ABI-bus slave reset (some platforms call it as "port", "apps",
           "bus", "axi_s").

Core resets:
- "non-sticky" - non-sticky CSR flags reset;
- "sticky"     - sticky CSR flags reset;
- "pipe"       - PIPE-interface (Core-PCS) logic reset (some platforms
                 call it just "pipe");
- "core"       - controller primary reset (resets everything except PMC
                 module, some platforms refer to this signal as "soft",
                 "pci");
- "phy"        - PCS/PHY block reset (strictly speaking it is normally
                 connected to the input of an external block, but the
                 reference manual says it must be available for the PMC
                 working correctly, some existing platforms call it
                 "pciephy", "phy", "link");
- "hot"        - PMC hot reset signal (also called as "sleep");
- "pwr"        - cold reset signal (can be referred as "pwr", "turnoff").

Bus reset:
- "perst" - PCIe standard signal used to reset the PCIe peripheral
            devices.

As you can see each platform uses it's own naming for basically the same
set of the signals. In the framework of this commit we suggest to add a
set of the clocks and reset signals resources, corresponding names and
identifiers for each denoted entity. At current stage the platforms will
be able to use the provided infrastructure to automatically request all
these resources and manipulate with them in the Host/EP init callbacks.
Alas it isn't that easy to create a common cold/hot reset procedure due to
too many platform-specifics in the procedure, like the external flags
exposure and the delays requirement.

Link: https://lore.kernel.org/r/20221113191301.5526-20-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-11-23 16:01:55 +01:00
Serge Semin
9f67ecdd95 PCI: dwc: Combine iATU detection procedures
Since the iATU CSR region is now retrieved in the DW PCIe resources getter
there is no much benefits in the iATU detection procedures splitting up.
Therefore let's join the iATU unroll/viewport detection procedure with the
rest of the iATU parameters detection code. The resultant method will be
as coherent as before, while the redundant functions will be eliminated
thus producing more readable code.

Link: https://lore.kernel.org/r/20221113191301.5526-19-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-11-23 16:01:55 +01:00
Serge Semin
ef8c58877f PCI: dwc: Introduce generic resources getter
Currently the DW PCIe Root Port and Endpoint CSR spaces are retrieved in
the separate parts of the DW PCIe core driver. It doesn't really make
sense since the both controller types have identical set of the core CSR
regions: DBI, DBI CS2 and iATU/eDMA. Thus we can simplify the DW PCIe Host
and EP initialization methods by moving the platform-specific registers
space getting and mapping into a common method. It gets to be even more
justified seeing the CSRs base address pointers are preserved in the
common DW PCIe descriptor. Note all the OF-based common DW PCIe settings
initialization will be moved to the new method too in order to have a
single function for all the generic platform properties handling in single
place.

A nice side-effect of this change is that the pcie-designware-host.c and
pcie-designware-ep.c drivers are cleaned up from all the direct dw_pcie
storage modification, which makes the DW PCIe core, Root Port and Endpoint
modules more coherent.

Link: https://lore.kernel.org/r/20221113191301.5526-18-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
2022-11-23 16:01:55 +01:00
Serge Semin
7f9e982dc4 PCI: dwc: Introduce generic controller capabilities interface
Since in addition to the already available iATU unrolled mapping we are
about to add a few more DW PCIe platform-specific capabilities (CDM-check
and generic clocks/resets resources) let's add a generic interface to set
and get the flags indicating their availability. The new interface shall
improve maintainability of the platform-specific code.

Link: https://lore.kernel.org/r/20221113191301.5526-17-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-11-23 16:01:55 +01:00
Serge Semin
8522e17d4c PCI: dwc: Introduce dma-ranges property support for RC-host
In accordance with the generic PCIe Root Port DT-bindings the "dma-ranges"
property has the same format as the "ranges" property. The only difference
is in their semantics. The "dma-ranges" property describes the PCIe-to-CPU
memory mapping in opposite to the CPU-to-PCIe mapping of the "ranges"
property. Even though the DW PCIe controllers are normally equipped with
the internal Address Translation Unit which inbound and outbound tables
can be used to implement both properties semantics, it was surprising for
me to discover that the host-related part of the DW PCIe driver currently
supports the "ranges" property only while the "dma-ranges" windows are
just ignored. Having the "dma-ranges" supported in the driver would be
very handy for the platforms, that don't tolerate the 1:1 CPU-PCIe memory
mapping and require a customized PCIe memory layout. So let's fix that by
introducing the "dma-ranges" property support.

First of all we suggest to rename the dw_pcie_prog_inbound_atu() method to
dw_pcie_prog_ep_inbound_atu() and create a new version of the
dw_pcie_prog_inbound_atu() function. Thus we'll have two methods for the
RC and EP controllers respectively in the same way as it has been
developed for the outbound ATU setup methods.

Secondly aside with the memory window index and type the new
dw_pcie_prog_inbound_atu() function will accept CPU address, PCIe address
and size as its arguments. These parameters define the PCIe and CPU memory
ranges which will be used to setup the respective inbound ATU mapping. The
passed parameters need to be verified against the ATU ranges constraints
in the same way as it is done for the outbound ranges.

Finally the DMA-ranges detected for the PCIe controller need to be
converted to the inbound ATU entries during the host controller
initialization procedure. It will be done in the framework of the
dw_pcie_iatu_setup() method. Note before setting the inbound ranges up we
need to disable all the inbound ATU entries in order to prevent unexpected
PCIe TLPs translations defined by some third party software like
bootloaders.

Link: https://lore.kernel.org/r/20221113191301.5526-16-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-11-23 16:01:55 +01:00
Bjorn Helgaas
8610e98f0b PCI: Drop of_match_ptr() to avoid unused variables
We have stubs for most OF interfaces even when CONFIG_OF is not set, so we
allow building of most controller drivers in that case for compile testing.

When CONFIG_OF is not set, "of_match_ptr(<match_table>)" compiles to NULL,
which leaves <match_table> unused, resulting in errors like this:

  $ make W=1
  drivers/pci/controller/pci-xgene.c:636:34: error: ‘xgene_pcie_match_table’ defined but not used [-Werror=unused-const-variable=]

Drop of_match_ptr() to avoid the unused variable warning.

See also 1dff012f63 ("PCI: Drop of_match_ptr() to avoid unused
variables").

Link: https://lore.kernel.org/r/20221025191339.667614-2-helgaas@kernel.org
Link: https://lore.kernel.org/r/20221116205100.1136224-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-11-17 13:32:21 -06:00
Thomas Gleixner
d474d92d70 x86/apic: Remove X86_IRQ_ALLOC_CONTIGUOUS_VECTORS
Now that the PCI/MSI core code does early checking for multi-MSI support
X86_IRQ_ALLOC_CONTIGUOUS_VECTORS is not required anymore.

Remove the flag and rely on MSI_FLAG_MULTI_PCI_MSI.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122015.865042356@linutronix.de
2022-11-17 15:15:22 +01:00
Thomas Gleixner
a474d3fbe2 PCI/MSI: Get rid of PCI_MSI_IRQ_DOMAIN
What a zoo:

     PCI_MSI
	select GENERIC_MSI_IRQ

     PCI_MSI_IRQ_DOMAIN
     	def_bool y
	depends on PCI_MSI
	select GENERIC_MSI_IRQ_DOMAIN

Ergo PCI_MSI enables PCI_MSI_IRQ_DOMAIN which in turn selects
GENERIC_MSI_IRQ_DOMAIN. So all the dependencies on PCI_MSI_IRQ_DOMAIN are
just an indirection to PCI_MSI.

Match the reality and just admit that PCI_MSI requires
GENERIC_MSI_IRQ_DOMAIN.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20221111122014.467556921@linutronix.de
2022-11-17 15:15:19 +01:00
Dmitry Torokhov
1d26a55fbe PCI: histb: Switch to using gpiod API
This patch switches the driver away from legacy gpio/of_gpio API to
gpiod API, and removes use of of_get_named_gpio_flags() which I want to
make private to gpiolib.

Link: https://lore.kernel.org/r/20220906204301.3736813-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-14 11:56:50 +01:00
Dexuan Cui
c234ba8042 PCI: hv: Only reuse existing IRTE allocation for Multi-MSI
Jeffrey added Multi-MSI support to the pci-hyperv driver by the 4 patches:
08e61e861a ("PCI: hv: Fix multi-MSI to allow more than one MSI vector")
455880dfe2 ("PCI: hv: Fix hv_arch_irq_unmask() for multi-MSI")
b4b77778ec ("PCI: hv: Reuse existing IRTE allocation in compose_msi_msg()")
a2bad844a6 ("PCI: hv: Fix interrupt mapping for multi-MSI")

It turns out that the third patch (b4b77778ec) causes a performance
regression because all the interrupts now happen on 1 physical CPU (or two
pCPUs, if one pCPU doesn't have enough vectors). When a guest has many PCI
devices, it may suffer from soft lockups if the workload is heavy, e.g.,
see https://lwn.net/ml/linux-kernel/20220804025104.15673-1-decui@microsoft.com/

Commit b4b77778ec itself is good. The real issue is that the hypercall in
hv_irq_unmask() -> hv_arch_irq_unmask() ->
hv_do_hypercall(HVCALL_RETARGET_INTERRUPT...) only changes the target
virtual CPU rather than physical CPU; with b4b77778ec, the pCPU is
determined only once in hv_compose_msi_msg() where only vCPU0 is specified;
consequently the hypervisor only uses 1 target pCPU for all the interrupts.

Note: before b4b77778ec, the pCPU is determined twice, and when the pCPU
is determined the second time, the vCPU in the effective affinity mask is
used (i.e., it isn't always vCPU0), so the hypervisor chooses different
pCPU for each interrupt.

The hypercall will be fixed in future to update the pCPU as well, but
that will take quite a while, so let's restore the old behavior in
hv_compose_msi_msg(), i.e., don't reuse the existing IRTE allocation for
single-MSI and MSI-X; for multi-MSI, we choose the vCPU in a round-robin
manner for each PCI device, so the interrupts of different devices can
happen on different pCPUs, though the interrupts of each device happen on
some single pCPU.

The hypercall fix may not be backported to all old versions of Hyper-V, so
we want to have this guest side change forever (or at least till we're sure
the old affected versions of Hyper-V are no longer supported).

Fixes: b4b77778ec ("PCI: hv: Reuse existing IRTE allocation in compose_msi_msg()")
Co-developed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Co-developed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20221104222953.11356-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-11-12 12:43:59 +00:00
Sascha Hauer
ae6b9a65af PCI: imx6: Initialize PHY before deasserting core reset
When the PHY is the reference clock provider then it must be initialized
and powered on before the reset on the client is deasserted, otherwise
the link will never come up. The order was changed in cf236e0c0d.
Restore the correct order to make the driver work again on boards where
the PHY provides the reference clock. This also changes the order for
boards where the Soc is the PHY reference clock divider, but this
shouldn't do any harm.

Link: https://lore.kernel.org/r/20221101095714.440001-1-s.hauer@pengutronix.de
Fixes: cf236e0c0d ("PCI: imx6: Do not hide PHY driver callbacks and refine the error handling")
Tested-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-11-11 16:56:10 +01:00
Johan Hovold
c4860af88d PCI: qcom: Add basic interconnect support
On Qualcomm platforms like SC8280XP and SA8540P, interconnect bandwidth
must be requested before enabling interconnect clocks.

Add basic support for managing an optional "pcie-mem" interconnect path
by setting a low constraint before enabling clocks and updating it after
the link is up.

Note that it is not possible for a controller driver to set anything but
a maximum peak bandwidth as expected average bandwidth will vary with
use case and actual use (and power policy?). This very much remains an
unresolved problem with the interconnect framework.

Also note that no constraint is set for the SC8280XP/SA8540P "cpu-pcie"
path for now as it is not clear what an appropriate constraint would be
(and the system does not crash when left unspecified).

Link: https://lore.kernel.org/r/20221102090705.23634-3-johan+linaro@kernel.org
Fixes: 70574511f3 ("PCI: qcom: Add support for SC8280XP")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
2022-11-11 12:04:22 +01:00
Nirmal Patel
d899aa6684 PCI: vmd: Disable MSI remapping after suspend
MSI remapping is disabled by VMD driver for Intel's Icelake and
newer systems in order to improve performance by setting
VMCONFIG_MSI_REMAP. By design VMCONFIG_MSI_REMAP register is cleared
by firmware during boot. The same register gets cleared when system
is put in S3 power state. VMD driver needs to set this register again
in order to avoid interrupt issues with devices behind VMD if MSI
remapping was disabled before.

Link: https://lore.kernel.org/r/20221109142652.450998-1-nirmal.patel@linux.intel.com
Fixes: ee81ee84f8 ("PCI: vmd: Disable MSI-X remapping when possible")
Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Francisco Munoz <francisco.munoz.ruiz@linux.intel.com>
2022-11-11 12:00:26 +01:00
Jim Quinlan
602fb86094 PCI: brcmstb: Set RCB_{MPS,64B}_MODE bits
Set RCB_MPS mode bit so that data for PCIe read requests up to the size of
the Maximum Payload Size (MPS) are returned in one completion, and data for
PCIe read requests greater than the MPS are split at the specified Read
Completion Boundary setting.

Set RCB_64B so that the Read Compeletion Boundary is 64B.

Link: https://lore.kernel.org/r/20221011184211.18128-6-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
2022-11-11 11:42:05 +01:00
Jim Quinlan
137b57413f PCI: brcmstb: Drop needless 'inline' annotations
A number of inline functions are called rarely and/or are not
time-critical.  Take out the "inline" and let the compiler do its work.

Link: https://lore.kernel.org/r/20221011184211.18128-5-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
2022-11-11 11:41:18 +01:00
Jim Quinlan
ca5dcc7631 PCI: brcmstb: Replace status loops with read_poll_timeout_atomic()
It would be nice to replace the PCIe link-up loop as well but
there are too many uses of this that do not poll (and the
read_poll_timeout uses "timeout==0" to loop forever).

Link: https://lore.kernel.org/r/20221011184211.18128-4-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
2022-11-11 11:40:47 +01:00
Jim Quinlan
3ae140ad82 PCI: brcmstb: Wait for 100ms following PERST# deassert
Be prudent and give some time for power and clocks to become stable.  As
described in the PCIe CEM specification sections 2.2 and 2.2.1; as well as
PCIe r5.0, 6.6.1.

Link: https://lore.kernel.org/r/20221011184211.18128-3-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
2022-11-11 11:40:47 +01:00
Jim Quinlan
198acab177 PCI: brcmstb: Enable Multi-MSI
We always wanted to enable Multi-MSI but didn't have a test device until
recently.  In addition, there are some devices out there that will ask for
multiple MSI but refuse to work if they are only granted one.

Link: https://lore.kernel.org/r/20221011184211.18128-2-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
2022-11-11 11:40:47 +01:00
Bjorn Helgaas
277004d7a4 PCI: Remove unnecessary <linux/of_irq.h> includes
Many host controller drivers #include <linux/of_irq.h> even though they
don't need it.  Remove the unnecessary #includes.

Link: https://lore.kernel.org/r/20221031153954.1163623-6-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Roy Zang <roy.zang@nxp.com>
2022-11-10 14:53:51 -06:00
Bjorn Helgaas
753596dcdb PCI: xgene-msi: Include <linux/irqdomain.h> explicitly
pci-xgene-msi.c uses irq_domain_add_linear() and related interfaces, so it
needs <linux/irqdomain.h> but doesn't include it directly; it relies on the
fact that <linux/of_irq.h> includes it.

But pci-xgene-msi.c *doesn't* need <linux/of_irq.h> itself.  Include
<linux/irqdomain.h> directly to remove this implicit dependency so a future
patch can drop <linux/of_irq.h>.

Link: https://lore.kernel.org/r/20221031153954.1163623-5-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-11-10 14:53:48 -06:00
Bjorn Helgaas
763d25e7af PCI: mvebu: Include <linux/irqdomain.h> explicitly
pci-mvebu.c uses irq_domain_add_linear() and related interfaces but relies
on <linux/irqdomain.h> but doesn't include it directly; it relies on the
fact that <linux/of_irq.h> includes it.

Include <linux/irqdomain.h> directly to remove this implicit dependency.

Link: https://lore.kernel.org/r/20221031153954.1163623-4-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-11-10 14:53:45 -06:00
Bjorn Helgaas
606a0430b3 PCI: microchip: Include <linux/irqdomain.h> explicitly
pcie-microchip-host.c uses irq_domain_add_linear() and related interfaces,
so it needs <linux/irqdomain.h> but doesn't include it directly; it relies
on the fact that <linux/of_irq.h> includes it.

But pcie-microchip-host.c *doesn't* need <linux/of_irq.h> itself.  Include
<linux/irqdomain.h> directly to remove this implicit dependency so a future
patch can drop <linux/of_irq.h>.

Link: https://lore.kernel.org/r/20221031153954.1163623-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
2022-11-10 14:53:41 -06:00
Bjorn Helgaas
8c50cd059c PCI: altera-msi: Include <linux/irqdomain.h> explicitly
pcie-altera-msi.c uses irq_domain_add_linear() and related interfaces, so
it needs <linux/irqdomain.h> but doesn't include it directly; it relies on
the fact that <linux/of_irq.h> includes it.

But pcie-altera-msi.c *doesn't* need <linux/of_irq.h> itself.  Include
<linux/irqdomain.h> directly to remove this implicit dependency so a future
patch can drop <linux/of_irq.h>.

Link: https://lore.kernel.org/r/20221031153954.1163623-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-11-10 14:53:38 -06:00
Vidya Sagar
8405d8f095 PCI: dwc: Use dev_info for PCIe link down event logging
Some of the platforms (like Tegra194 and Tegra234) have open slots and
not having an endpoint connected to the slot is not an error.
So, changing the macro from dev_err to dev_info to log the event.

Link: https://lore.kernel.org/r/20220913101237.4337-1-vidyas@nvidia.com
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-11-10 16:36:34 +01:00
Manivannan Sadhasivam
fba31beab3 PCI: qcom: Fix error message for reset_control_assert()
Fix the error message to mention "assert" instead of "deassert".

Link: https://lore.kernel.org/r/20221109094039.25753-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
2022-11-10 16:05:20 +01:00
Dexuan Cui
e70af8d040 PCI: hv: Fix the definition of vector in hv_compose_msi_msg()
The local variable 'vector' must be u32 rather than u8: see the
struct hv_msi_desc3.

'vector_count' should be u16 rather than u8: see struct hv_msi_desc,
hv_msi_desc2 and hv_msi_desc3.

Fixes: a2bad844a6 ("PCI: hv: Fix interrupt mapping for multi-MSI")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: Jeffrey Hugo <quic_jhugo@quicinc.com>
Cc: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20221027205256.17678-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-11-03 15:50:28 +00:00
Dmitry Torokhov
16e3f40779 PCI: tegra: Switch to using devm_fwnode_gpiod_get
[devm_]gpiod_get_from_of_node in drivers usage should be limited
so that gpiolib can be cleaned up; let's switch to the generic device
property API.

It may even help with handling secondary fwnodes when gpiolib is taught
to handle gpios described by swnodes.

Link: https://lore.kernel.org/r/20220903-gpiod_get_from_of_node-remove-v1-1-b29adfb27a6c@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[lpieralisi@kernel.org: commit log]
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2022-10-27 15:30:31 +02:00
Vidya Sagar
442ae919e6 PCI: designware-ep: Disable PTM capabilities for EP mode
Dual mode DesignWare PCIe IP has PTM capability enabled (if supported) even
in the EP mode. The PCIe compliance for the EP mode expects PTM
capabilities (ROOT_CAPABLE, RES_CAPABLE, CLK_GRAN) be disabled.
Hence disable PTM for the EP mode.

Link: https://lore.kernel.org/r/20220919143340.4527-3-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
2022-10-27 14:42:56 +02:00
Vidya Sagar
6611036128 PCI: dwc: Fix n_fts[] array overrun
commit aeaa0bfe89 ("PCI: dwc: Move N_FTS setup to common setup")
incorrectly uses pci->link_gen in deriving the index to the
n_fts[] array also introducing the issue of accessing beyond the
boundaries of array for greater than Gen-2 speeds. This change fixes
that issue.

Link: https://lore.kernel.org/r/20220926111923.22487-1-vidyas@nvidia.com
Fixes: aeaa0bfe89 ("PCI: dwc: Move N_FTS setup to common setup")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
2022-10-27 10:14:23 +02:00
Jon Hunter
897a66d281 Revert "PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro"
This reverts commit 8bb7ff12a9.

Commit 8bb7ff12a9 ("PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro")
updated the Tegra PCI driver to use the macro PCI_CONF1_EXT_ADDRESS()
instead of a local function in the Tegra PCI driver. This broke PCI for
some Tegra platforms because, when calculating the offset value, the mask
applied to the lower 8-bits changed from 0xff to 0xfc.

For now, fix this by reverting this commit.

Fixes: 8bb7ff12a9 ("PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro")
Link: https://lore.kernel.org/r/20221017084006.11770-1-jonathanh@nvidia.com
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-10-17 12:11:09 -05:00
Dmitry Baryshkov
a84ed1919f PCI: qcom-ep: Setup PHY to work in EP mode
Call phy_set_mode_ext() to notify the PHY driver that the PHY is being
used in the EP mode.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jingoo Han <jingoohan1@gmail.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/20220927092207.161501-6-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-17 13:14:24 +05:30
Dmitry Baryshkov
f90747d1b6 PCI: qcom: Setup PHY to work in RC mode
Call phy_set_mode_ext() to notify the PHY driver that the PHY is being
used in the RC mode.

Reviewed-by: Jingoo Han <jingoohan1@gmail.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/20220927092207.161501-5-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-17 13:14:24 +05:30
Linus Torvalds
041bc24d86 pci-v6.1-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmNECrkUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vy7HQ//egBx+1/Eu5N+Y2c4ebGLcc4zCTks
 Cj3lDFB8v6KvNaDJZHToJi+vychv6BjsQPE1rpfU18+FCfB/fBfzkf/N22qr258l
 tNDn+YxgXHKd6zumUW88bRmK6vnKz8ELKELC3LMZNmJMcWemFKFY2rdgCh5SEJ8d
 S/VFSSPip+oyA02zOa1QoCu1nlbYGwZRegYpBTHMSHfgm0ddBSQWNVMKBJSnNP9A
 73X+unY3Nh360oRgaQb8wnCJp8vpalavtGMTq1CJPQBAAlUTWpVUAabF7eSNSFZt
 KO7aFdL1rWgWeZsLBLhVq6fIhK31U7ED9aXYYBMcla8zRUlP/IkMEUF/ztdSuQ9Y
 t4cQVrVGAM/6WnQaqzfuktEWGG3OJGnOYncvWhUlP6SydUagvaKn49yvKBNw6Ehb
 GFtrx7/2Ap8icGqkeLajxGVq+N8VH5T02uToOCxZn/U10m0Hhu6objt3erFmIVoN
 +aWojZCc7YLVksNzyYcNSEvsDeGz/RA/l3dxgEfJOu44rQAKq/AzwT8scjsNqjAs
 e0UjDVYJVdU7yCM2lDhqYEzfImkqienO+iEySIkUIpo5Z9YUf8//kvYPOFih7ZXH
 KhGbezPl3O/Ta2Go5TQ5ovh09IGVYM/PzjFO0a/PeOjCe9heutrmuFtLi+y+ROL0
 wd/mZL1kkT++P7c=
 =pOqY
 -----END PGP SIGNATURE-----

Merge tag 'pci-v6.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull pci updates from Bjorn Helgaas:
 "Resource management:

   - Distribute spare resources to unconfigured hotplug bridges at
     boot-time (not just when hot-adding such a bridge), which makes
     hot-adding devices to docks work better.

   - Revert to a BAR assignment inherited from firmware only when the
     address is actually reachable via any upstream bridges, which fixes
     some cases where firmware doesn't configure all devices.

   - Add a sysfs interface to resize BARs so this can be done before
     assigning devices to a VM through VFIO.

  Power management:

   - Disable Precision Time Management for all devices on suspend to
     enable lower-power PM state. We previously did this just for Root
     Ports, which isn't enough because downstream devices can still
     generate PTM messages, which cause errors if it's disabled in the
     Root Port.

   - Save and restore the ASPM L1 PM Substates configuration for
     suspend/ resume. Previously this configuration was lost, so L1.x
     states likely stopped working after resume.

   - Check whether the L1 PM Substates Capability exists. If it didn't
     exist, we previously read junk and tried to configure L1 Substates
     based on that.

   - Fix the LTR_L1.2_THRESHOLD computation, which previously set a
     threshold for entering L1.2 that was too low in some cases.

   - Reduce the delay after transitions to or from D3cold by using
     usleep_range() rather than msleep(), which often slept for ~19ms
     instead of the 10ms normally required. The spec says 10ms is
     enough, but it's possible we could trip over devices that need a
     little more.

  Error handling:

   - Work around a BIOS bug that caused Intel Root Ports to advertise a
     Root Port Programmed I/O (RP PIO) log size of zero, which caused
     annoying warnings and prevented the kernel from dumping log
     registers for DPC errors.

  Qualcomm PCIe controller driver:

   - Add support for SC8280XP and SA8540P host controllers and SM8450
     endpoint controller.

   - Disable Master AXI clock on endpoint controllers to save power when
     link is idle or in L1.x.

   - Expose link state transition counts via debugfs to help debug
     issues with low-power states.

   - Add auto-loading module support.

  Synopsys DesignWare PCIe controller driver:

   - Remove a dependency on ZONE_DMA32 by allocating the MSI target page
     differently. There's more work to do related to eDMA controllers,
     so it's not completely settled"

* tag 'pci-v6.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (71 commits)
  PCI: qcom-ep: Check platform_get_resource_byname() return value
  PCI: qcom-ep: Add support for SM8450 SoC
  dt-bindings: PCI: qcom-ep: Add support for SM8450 SoC
  dt-bindings: PCI: qcom-ep: Define clocks per platform
  PCI: qcom-ep: Make PERST separation optional
  dt-bindings: PCI: qcom-ep: Make PERST separation optional
  PCI: qcom-ep: Disable Master AXI Clock when there is no PCIe traffic
  PCI: Expose PCIe Resizable BAR support via sysfs
  PCI/ASPM: Correct LTR_L1.2_THRESHOLD computation
  PCI/ASPM: Ignore L1 PM Substates if device lacks capability
  PCI/ASPM: Factor out L1 PM Substates configuration
  PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS
  PCI: qcom-ep: Expose link transition counts via debugfs
  PCI: qcom-ep: Disable IRQs during driver remove
  PCI/ASPM: Save L1 PM Substates Capability for suspend/resume
  PCI/ASPM: Refactor L1 PM Substates Control Register programming
  PCI: qcom-ep: Make use of the cached dev pointer
  PCI: qcom-ep: Rely on the clocks supplied by devicetree
  PCI: qcom-ep: Add kernel-doc for qcom_pcie_ep structure
  phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()
  ...
2022-10-11 11:08:18 -07:00
Bjorn Helgaas
14868d783c Merge branch 'remotes/lorenzo/pci/misc'
- Add macros for PCI Configuration Mechanism #1 and use them in the
  ftpci100, mt7621, and tegra drivers (Pali Rohár)

* remotes/lorenzo/pci/misc:
  PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro
  PCI: mt7621: Use PCI_CONF1_EXT_ADDRESS() macro
  PCI: ftpci100: Use PCI_CONF1_ADDRESS() macro
  PCI: Add standard PCI Config Address macros
2022-10-05 17:32:57 -05:00
Bjorn Helgaas
e302bafff6 Merge branch 'pci/qcom'
- List platforms that use a single MSI host interrupt in qcom DT (Johan
  Hovold)

- Add SC8280XP, SA8540P support to qcom DT binding and driver(Johan Hovold)

- Make all optional clocks truly optional in the driver (Johan Hovold)

- Rename per-IP structs to reflect the IP version (Johan Hovold)

- Sort device ID match table by compatible string (Johan Hovold)

- Add MODULE_DEVICE_TABLE to enable module autoloading (Dmitry Baryshkov)

- Drop the unused .post_deinit() callback (Johan Hovold)

- Rely on DT for clock information instead of hard-coding it in the driver
  (Manivannan Sadhasivam)

- Disable IRQs when removing driver to avoid spurious IRQs later
  (Manivannan Sadhasivam)

- Expose link transition counts via debugfs to help debug issues with
  low-power states (Manivannan Sadhasivam)

- Gate Master AXI clock to the MHI bus while in L1 substates to save power
  (Manivannan Sadhasivam)

- Disable Master AXI clock to save power when there is no traffic on PCIe
  (Manivannan Sadhasivam)

- Make the "PERST separation" debug feature optional in the DT and the
  driver (Manivannan Sadhasivam)

- Define clocks to be per-platform in DT to prepare for future SoCs
  (Manivannan Sadhasivam)

- Add SM8450 SoC support (Manivannan Sadhasivam)

- Check for platform_get_resource_byname() to avoid a NULL pointer
  dereference (Yang Yingliang)

* pci/qcom:
  PCI: qcom-ep: Check platform_get_resource_byname() return value
  PCI: qcom-ep: Add support for SM8450 SoC
  dt-bindings: PCI: qcom-ep: Add support for SM8450 SoC
  dt-bindings: PCI: qcom-ep: Define clocks per platform
  PCI: qcom-ep: Make PERST separation optional
  dt-bindings: PCI: qcom-ep: Make PERST separation optional
  PCI: qcom-ep: Disable Master AXI Clock when there is no PCIe traffic
  PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS
  PCI: qcom-ep: Expose link transition counts via debugfs
  PCI: qcom-ep: Disable IRQs during driver remove
  PCI: qcom-ep: Make use of the cached dev pointer
  PCI: qcom-ep: Rely on the clocks supplied by devicetree
  PCI: qcom-ep: Add kernel-doc for qcom_pcie_ep structure
  PCI: qcom: Rename host-init error label
  PCI: qcom: Drop unused post_deinit callback
  PCI: qcom-ep: Add MODULE_DEVICE_TABLE
  PCI: qcom: Sort device-id table
  PCI: qcom: Clean up IP configurations
  PCI: qcom: Make all optional clocks optional
  PCI: qcom: Add support for SA8540P
  PCI: qcom: Add support for SC8280XP
  dt-bindings: PCI: qcom: Add SA8540P to binding
  dt-bindings: PCI: qcom: Add SC8280XP to binding
  dt-bindings: PCI: qcom: Enumerate platforms with single msi interrupt
2022-10-05 17:32:57 -05:00
Bjorn Helgaas
fba236f96c Merge branch 'remotes/lorenzo/pci/mvebu'
- Fix endianness of emulated bridge iolimitupper, iobaseupper, memlimit and
  membase members (Pali Rohár)

* remotes/lorenzo/pci/mvebu:
  PCI: mvebu: Fix endianness when accessing PCI emul bridge members
2022-10-05 17:32:56 -05:00
Bjorn Helgaas
7cb0a66699 Merge branch 'remotes/lorenzo/pci/mediatek'
- Rename the pcie-mediatek-gen3 driver from 'mtk-pcie' to 'mtk-pcie-gen3'
  so it can coexist with the pcie-mediatek driver, which also uses
  'mtk-pcie' (Felix Fietkau)

* remotes/lorenzo/pci/mediatek:
  PCI: mediatek-gen3: Change driver name to mtk-pcie-gen3
2022-10-05 17:32:56 -05:00
Bjorn Helgaas
fefb75d842 Merge branch 'remotes/lorenzo/pci/dwc'
- Use dmam_alloc_coherent() instead of dma_map_page() to allocate the MSI
  target page, which means dwc drivers will work even when ZONE_DMA32 is
  disabled (Will McVicker)

- If we can't allocate an MSI target page with a 32-bit address, try
  allocating one with a 64-bit address (Will McVicker)

- Switch from of_gpio_named_count() to generic gpiod_count() (Andy
  Shevchenko)

- Add support for i.MX8MP PCIe (Richard Zhu)

- Fix the Freescale i.MX8 PHY driver, which had interchanged the phy_init()
  and phy_power_on() interfaces (Richard Zhu)

* remotes/lorenzo/pci/dwc:
  phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()
  PCI: imx6: Add i.MX8MP PCIe support
  PCI: dwc: Replace of_gpio_named_count() by gpiod_count()
  PCI: dwc: Drop dependency on ZONE_DMA32
2022-10-05 17:32:56 -05:00
Bjorn Helgaas
84aabff880 Merge branch 'remotes/lorenzo/pci/bridge-emul'
- In an emulated PCI bridge, set Capability offsets so they match the
  hardware offsets shown by U-Boot (Pali Rohár)

* remotes/lorenzo/pci/bridge-emul:
  PCI: pci-bridge-emul: Set position of PCI capabilities to real HW value
2022-10-05 17:32:55 -05:00
Bjorn Helgaas
9d17becd49 Merge branch 'remotes/lorenzo/pci/apple'
- Switch from gpiod_get_from_of_node() to generic devm GPIO API (Dmitry
  Torokhov)

* remotes/lorenzo/pci/apple:
  PCI: apple: Do not leak reset GPIO on unbind/unload/error
2022-10-05 17:32:54 -05:00
Yang Yingliang
94f0b955e4 PCI: qcom-ep: Check platform_get_resource_byname() return value
If platform_get_resource_byname() fails, 'mmio_res' will be set to NULL
pointer, which causes a NULL pointer dereference when it is used in
qcom_pcie_perst_deassert().

Check the return value to prevent it.

Link: https://lore.kernel.org/r/20220429080740.1294797-1-yangyingliang@huawei.com
Fixes: f55fee56a6 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
2022-10-05 17:30:55 -05:00
Manivannan Sadhasivam
867ec26c16 PCI: qcom-ep: Add support for SM8450 SoC
Add support for SM8450 SoC to the Qualcomm PCIe Endpoint Controller
driver. The driver uses the same config as the existing SDX55 chipset,
so additional settings are not required.

Link: https://lore.kernel.org/r/20220914075350.7992-13-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-10-05 17:18:12 -05:00
Manivannan Sadhasivam
aa4b175362 PCI: qcom-ep: Make PERST separation optional
PERST separation is an optional debug feature used to collect the crash
dump from the PCIe endpoint devices by the PCIe host when the endpoint
crashes. This feature keeps the PCIe link up by separating the PCIe IP
block from the SoC reset logic.

Make the property optional in the driver.

Link: https://lore.kernel.org/r/20220914075350.7992-10-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-10-05 17:17:03 -05:00
Manivannan Sadhasivam
0391632948 PCI: qcom-ep: Disable Master AXI Clock when there is no PCIe traffic
The Master AXI clock can be disabled when it is not used i.e., when there
is no traffic on the PCIe bus. This helps to save power during idle state.

[bhelgaas: tidy and wrap comment]
Link: https://lore.kernel.org/r/20220914075350.7992-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-10-05 17:15:47 -05:00
Manivannan Sadhasivam
c457ac029e PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS
During L1SS, gate the Master clock supplied to the MHI bus to save power.

Link: https://lore.kernel.org/r/20220914075350.7992-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-10-05 16:17:45 +02:00
Manivannan Sadhasivam
6dbba2b53c PCI: qcom-ep: Expose link transition counts via debugfs
Qualcomm PCIe controllers have debug registers in the MMIO region
that count PCIe link transitions. Expose them over debugfs to
userspace to help debug the low power issues.

Link: https://lore.kernel.org/r/20220914075350.7992-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-10-05 16:17:45 +02:00
Manivannan Sadhasivam
19619b43f0 PCI: qcom-ep: Disable IRQs during driver remove
Disable the Global and PERST IRQs during driver remove to avoid getting
spurious IRQs after resource deallocation.

Link: https://lore.kernel.org/r/20220914075350.7992-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-10-05 16:17:27 +02:00
Manivannan Sadhasivam
9cf4843e1a PCI: qcom-ep: Make use of the cached dev pointer
In the qcom_pcie_ep_get_resources() function, dev pointer is already
cached in a local variable. So let's make use of it instead of getting
the dev pointer again from pdev struct.

Link: https://lore.kernel.org/r/20220914075350.7992-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-10-03 10:38:16 +02:00
Manivannan Sadhasivam
e2efd31465 PCI: qcom-ep: Rely on the clocks supplied by devicetree
Generally, device drivers should just rely on the platform data like
devicetree to supply the clocks required for the functioning of the
peripheral. There is no need to hardcode the clk info in the driver.
So get rid of the static clk info and obtain the platform supplied
clks.

The total number of clocks supplied is obtained using the
devm_clk_bulk_get_all() API and used for the rest of the clk_bulk_ APIs.

Link: https://lore.kernel.org/r/20220914075350.7992-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-10-03 10:38:16 +02:00
Manivannan Sadhasivam
f1bfbd000f PCI: qcom-ep: Add kernel-doc for qcom_pcie_ep structure
Add kernel-doc for qcom_pcie_ep structure.

Link: https://lore.kernel.org/r/20220914075350.7992-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-10-03 10:38:16 +02:00
Richard Zhu
cbcf8722b5 phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()
Refer to phy_core driver, phy_init() must be called before phy_power_on().
Fix the wrong order of phy_init() and phy_power_on() here.

Link: https://lore.kernel.org/r/1662344583-18874-1-git-send-email-hongxing.zhu@nxp.com
Fixes: 1aa97b0022 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver")
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-10-03 10:34:46 +02:00
Richard Zhu
3db1e531e4 PCI: imx6: Add i.MX8MP PCIe support
Add i.MX8MP PCIe support.
To avoid codes duplication when find the syscon regmap, add the iomux
gpr syscon compatible into drvdata.

Link: https://lore.kernel.org/r/1662109086-15881-8-git-send-email-hongxing.zhu@nxp.com
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-10-03 10:34:46 +02:00
Andy Shevchenko
0dbc45241d PCI: dwc: Replace of_gpio_named_count() by gpiod_count()
As a preparation to unexport of_gpio_named_count(), convert the
driver to use gpiod_count() instead.

Link: https://lore.kernel.org/r/20220830183310.48541-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
2022-10-03 10:34:46 +02:00
Pali Rohár
8bb7ff12a9 PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro
Simplify pci-tegra.c driver code and use new PCI_CONF1_EXT_ADDRESS() macro
for accessing PCI config space.

Link: https://lore.kernel.org/r/20220928121911.14994-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
2022-09-29 10:38:13 +02:00
Johan Hovold
0e4d9a5cc7 PCI: qcom: Rename host-init error label
Use a more descriptive name for the reset host-init error label for
consistency.

Link: https://lore.kernel.org/r/20220928155421.21660-3-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-09-29 10:34:47 +02:00
Johan Hovold
b623023225 PCI: qcom: Drop unused post_deinit callback
Drop the unused and confusingly named post_deinit callback that was
added for the now removed pipe clock handling.

If ever needed we can add back a callback named pre_deinit (or perhaps
rather pre_phy_power_off) instead.

Link: https://lore.kernel.org/r/20220928155421.21660-2-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-09-29 10:34:47 +02:00
Pali Rohár
2301a3e1a5 PCI: mt7621: Use PCI_CONF1_EXT_ADDRESS() macro
Simplify pcie-mt7621.c driver code and use new PCI_CONF1_EXT_ADDRESS()
macro for accessing PCIe config space.

Link: https://lore.kernel.org/r/20220924092404.31776-4-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
2022-09-27 11:08:20 +02:00
Pali Rohár
f75a27dc6c PCI: ftpci100: Use PCI_CONF1_ADDRESS() macro
Simplify pci-ftpci100.c driver code and use new PCI_CONF1_ADDRESS() macro
for accessing PCI config space.

Link: https://lore.kernel.org/r/20220924092404.31776-3-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-09-27 11:08:20 +02:00
Pali Rohár
a080f9ad60 PCI: aardvark: Add support for PCI Bridge Subsystem Vendor ID on emulated bridge
Register with Subsystem Device/Vendor ID is at offset 0x2c.

Export it via the emulated bridge to enable support for the Subsystem
Device/Vendor ID - by reading it in the PCI controller config space and
storing it in the emulated bridge control structures, so that it is
exposed in the respective PCI capability.

After this change Subsystem ID is visible in lspci output at line:

  Capabilities: [40] Subsystem

Link: https://lore.kernel.org/r/20220711225915.13896-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-09-16 14:39:44 +02:00
Dmitry Torokhov
a6b9ede1f3 PCI: apple: Do not leak reset GPIO on unbind/unload/error
The driver allocates reset GPIO in apple_pcie_setup_port() but neither
releases the resource, nor uses devm API to have it released
automatically.

Let's fix this by switching to devm API. While at it let's use generic
devm_fwnode_gpiod_get() instead of OF-specific gpiod_get_from_of_node()
- this will allow us top stop exporting the latter down the road.

Link: https://lore.kernel.org/r/YxatO5OaI2RpxQ2M@google.com
Fixes: 1e33888fbe ("PCI: apple: Add initial hardware bring-up")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Hector Martin <marcan@marcan.st>
Acked-by: Marc Zyngier <maz@kernel.org>
2022-09-14 17:45:47 +02:00
Dmitry Baryshkov
2baedb9f93 PCI: qcom-ep: Add MODULE_DEVICE_TABLE
Add MODULE_DEVICE_TABLE to enable module autoloading for respective
device.

Link: https://lore.kernel.org/r/20220430084740.3769925-1-dmitry.baryshkov@linaro.org
Fixes: f55fee56a6 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-08-30 10:29:36 +02:00
Will McVicker
423511ec23 PCI: dwc: Drop dependency on ZONE_DMA32
Re-work the msi_msg DMA allocation logic to use dmam_alloc_coherent() which
uses the coherent DMA mask to try to return an allocation within the DMA
mask limits. With that, we now can drop the msi_page parameter in struct
dw_pcie_rp. This allows kernel configurations that disable ZONE_DMA32 to
continue supporting a 32-bit DMA mask. Without this patch, the PCIe host
device will fail to probe when ZONE_DMA32 is disabled.

Link: https://lore.kernel.org/r/20220825235404.4132818-2-willmcvicker@google.com
Fixes: 35797e672f ("PCI: dwc: Fix MSI msi_msg DMA mapping")
Reported-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Signed-off-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
2022-08-29 09:56:33 +02:00
Pali Rohár
658aea35ab PCI: pci-bridge-emul: Set position of PCI capabilities to real HW value
mvebu and aardvark HW have PCIe capabilities on different offset in PCI
config space. Extend pci-bridge-emul.c code to allow setting custom driver
custom value where PCIe capabilities starts.

With this change PCIe capabilities of both drivers are reported at the same
location as where they are reported by U-Boot - in their real HW offset.

Link: https://lore.kernel.org/r/20220824112124.21675-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-08-25 12:07:56 +02:00
Felix Fietkau
034fdac01f PCI: mediatek-gen3: Change driver name to mtk-pcie-gen3
driver_register() will refuse to register another driver with the same name.
This change allows pcie-mediatek-gen3 to coexist with pcie-mediatek built into
the kernel.

Link: https://lore.kernel.org/r/20220505083907.86598-1-nbd@nbd.name
Fixes: d3bf75b579 ("PCI: mediatek-gen3: Add MediaTek Gen3 driver for MT8192")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Jianjun Wang <jianjun.wang@mediatek.com>
2022-08-23 14:58:49 +02:00
Pali Rohár
2e379ac66d PCI: mvebu: Fix endianness when accessing PCI emul bridge members
PCI emul bridge members iolimitupper, iobaseupper, memlimit and membase
are of type __le16, so correctly access these members using
le16_to_cpu() macros.

Link: https://lore.kernel.org/r/20220812141115.24082-1-pali@kernel.org
Fixes: e7a0187672 ("PCI: mvebu: Propagate errors when updating PCI_IO_BASE and PCI_MEM_BASE registers")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-08-23 12:19:59 +02:00
Johan Hovold
d6cbfcd244 PCI: qcom: Sort device-id table
Sort the device-id table entries alphabetically by compatible string to
make it easier to find entries and add new ones.

Link: https://lore.kernel.org/r/20220714071348.6792-9-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-08-23 09:26:00 +02:00
Johan Hovold
2231173506 PCI: qcom: Clean up IP configurations
The various IP versions have different configurations that are encoded
in separate sets of operation callbacks. Currently, there is no need for
also maintaining corresponding sets of data parameters, but it is
conceivable that these may again be found useful (e.g. to implement
minor variations of the operation callbacks).

Rename the default configuration structures after the IP version they
apply to so that they can more easily be reused by different SoCs.

Note that SoC specific configurations can be added later if need arises
(e.g. cfg_sc8280xp).

Link: https://lore.kernel.org/r/20220714071348.6792-8-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-08-23 09:25:52 +02:00
Johan Hovold
014aa3518a PCI: qcom: Make all optional clocks optional
The kernel is not a devicetree validator and does not need to re-encode
information which is already available in the devicetree.

This is specifically true for the optional PCIe clocks, some of which
are really interconnect clocks.

Treat also the 2.7.0 optional clocks as truly optional instead of
maintaining a list of clocks per compatible (including two compatible
strings for the two identical controllers on sm8450) just to validate
the devicetree.

Link: https://lore.kernel.org/r/20220714071348.6792-7-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-08-23 09:25:44 +02:00
Johan Hovold
c64f56d085 PCI: qcom: Add support for SA8540P
The SA8540P platform has five PCIe controllers: two 4-lane, two 2-lane
and one 1-lane.

Add a new "qcom,pcie-sa8540p" compatible string and reuse the 1.9.0 ops.

Note that like for SC8280XP, the SA8540P controllers need two or three
interconnect clocks to be enabled.

Link: https://lore.kernel.org/r/20220714071348.6792-6-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-08-23 09:25:11 +02:00
Johan Hovold
70574511f3 PCI: qcom: Add support for SC8280XP
The SC8280XP platform has seven PCIe controllers: two used with USB4,
two 4-lane, two 2-lane and one 1-lane.

Add a new "qcom,pcie-sc8280xp" compatible string and reuse the 1.9.0
ops.

Note that the SC8280XP controllers need two or three interconnect
clocks to be enabled. Model these as optional clocks to avoid encoding
devicetree data in the PCIe driver.

Note that the same could be done for the SM8450 interconnect clocks and
possibly also for the TBU clocks.

Link: https://lore.kernel.org/r/20220714071348.6792-5-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-08-23 09:25:01 +02:00
William Zhang
7bb49d774f arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
With Broadcom Broadband arch ARCH_BCMBCA supported in the kernel, this
patch series migrate the ARCH_BCM4908 symbol to ARCH_BCMBCA. Hence
replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Guenter Roeck <linux@roeck-us.net> (for watchdog)
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci)
Acked-by: Wolfram Sang <wsa@kernel.org> (for i2c)
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> (for reset)
Link: https://lore.kernel.org/r/20220803175455.47638-7-william.zhang@broadcom.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-08-15 09:55:34 -07:00
Linus Torvalds
a976835fdb Fix of heap data and clang warnings, support for a new Intel NTB device,
and NTB EndPoint Function (EPF) support and the various fixes from that
 being in -next for Linux v5.20
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEoE9b9c3U2JxX98mqbmZLrHqL0iMFAmL2skgACgkQbmZLrHqL
 0iMaAhAAlHvhdSvq7huLkbKd22TdorqaU3bVCYB0KzPR7Ghc4P5XqdLE1VI+TAFD
 PXFpD6D2VoGxAuh2PKHzRyAGcV4nr8JDBMZtgpJOcJr3rFhdg1wlfIX1jemrCxTT
 9clSEyJ4WSbRpSXq5cbbF3AqaMPPlZ2wMiopKPieCxjTyqld1Wf80ah58GyeT9ut
 8zyRzsgOI22WjQmIY13pWUWSTZFtomaM/oVaTC1eepES/t+/1L6/AmucVGY43SnD
 N8LEZroRRHmFlyI7H9J1U580sTZVqaEBJoKfN66wnTMCXPR/+8zWprZOLB+R5A+L
 klJY7PakrKd7mlafUbRxsBcKnSIrB7UtVZR8Xs2SlReSEqmcDEnIXq8Ga6RZOGKf
 hsk72KtqtyFHycFqw8kVGc+hLon39RUd7HI8a3jyrOmJKp3bJ/iQxiLEuKpScZKm
 sS6bmBMXJCV9o8UJM7GbyX5kRIki+Dc66dFIcqLFwHN0e0I6yV8TE9HZ5SXtsFri
 uBwlzRbdYctJm9+1WT2FxuCb1H5DZaMdKCf2fQQnWXW2PqLIlKj2uE1O6IctIBJr
 rlZea6ZOU8zUsIMdANlezJuoTol/bNRWqYbRm0x69lYI7+SYDov3Dg5SAhgJtLFn
 F/zaGcO2aTKLxBjXyx+Zu2KgEYR8N+cLYKhLY3/Cv6/vt4CbW2Y=
 =DAah
 -----END PGP SIGNATURE-----

Merge tag 'ntb-5.20' of https://github.com/jonmason/ntb

Pull NTB updates from Jon Mason:
 "Non-Transparent Bridge updates.

  Fix of heap data and clang warnings, support for a new Intel NTB
  device, and NTB EndPoint Function (EPF) support and the various fixes
  for that"

* tag 'ntb-5.20' of https://github.com/jonmason/ntb:
  MAINTAINERS: add PCI Endpoint NTB drivers to NTB files
  NTB: EPF: Tidy up some bounds checks
  NTB: EPF: Fix error code in epf_ntb_bind()
  PCI: endpoint: pci-epf-vntb: reduce several globals to statics
  PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init()
  PCI: endpoint: Fix Kconfig dependency
  NTB: EPF: set pointer addr to null using NULL rather than 0
  Documentation: PCI: extend subheading underline for "lspci output" section
  Documentation: PCI: Use code-block block for scratchpad registers diagram
  Documentation: PCI: Add specification for the PCI vNTB function device
  PCI: endpoint: Support NTB transfer between RC and EP
  NTB: epf: Allow more flexibility in the memory BAR map method
  PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address
  ntb: intel: add GNR support for Intel PCIe gen5 NTB
  NTB: ntb_tool: uninitialized heap data in tool_fn_write()
  ntb: idt: fix clang -Wformat warnings
2022-08-13 14:00:45 -07:00
Frank Li
4284c88fff PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address
ntb_mw_set_trans() will set memory map window after endpoint function
driver bind. The inbound map address need be updated dynamically when
using NTB by PCIe Root Port and PCIe Endpoint connection.

Checking if iatu already assigned to the BAR, if yes, using assigned iatu
number to update inbound address map and skip set BAR's register.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-08-09 17:53:58 -04:00
Linus Torvalds
eff0cb3d91 pci-v5.20-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmLr+2wUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vxfZg//eChkC2EUdT6K3zuQDbJJhsGcuOQF
 lnZuUyDn4xw7BkEoZf8V6YdAnp7VvgKhLOq1/q3Geu/LBbCaczoEogOCaR/WcVOs
 C+MsN0RWZQtgfuZKncQoqp25NeLPK9PFToeiIX/xViAYZF7NVjDY7XQiZHQ6JkEA
 /7cUqv/4nS3KCMsKjfmiOxGnqohMWtICiw9qjFvJ40PEDnNB1b53rkiVTxBFePpI
 ePfsRfi/C7klE3xNfoiEgrPp+Jfw+oShsCwXUsId7bEL2oLBc7ClqP05ZYZD3bTK
 QQYyZ12Cq8TysciYpUGBjBnywUHS5DIO5YaV3wxyVAR2Z+6GY2/QVjOa2kKvoK0o
 Hba6TJf8bL58AhSI8Q62pBM0sS7dqJSff+9c2BGpZvII5spP/rQQLlJO56TJjwkw
 Dlf0d3thhZOc9vSKjKw+0v0FdAyc4L11EOwUsw95jZeT5WWgqJYGFnWPZwqBI1KM
 DI1E5wVO5tA2H3NEn+BTTHbLWL+UppqyXPXBHiW52b2q5Bt8fJWMsFvnEEjclxmG
 pYCI7VgF8jqbYKxjobxPFY2x6PH9hfaGMxwzZSdOX6e/Eh+1esgyyaC5APpCO+Pp
 e4OkJaOzCmggrD0jYeLWu+yDm5KRrYo5cdfKHrKgAof0Am41lAa1OhJ2iH4ckNqP
 1qmHereDOe0zNVw=
 =9TAR
 -----END PGP SIGNATURE-----

Merge tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Consolidate duplicated 'next function' scanning and extend to allow
     'isolated functions' on s390, similar to existing hypervisors
     (Niklas Schnelle)

  Resource management:
   - Implement pci_iobar_pfn() for sparc, which allows us to remove the
     sparc-specific pci_mmap_page_range() and pci_mmap_resource_range().

     This removes the ability to map the entire PCI I/O space using
     /proc/bus/pci, but we believe that's already been broken since
     v2.6.28 (Arnd Bergmann)

   - Move common PCI definitions to asm-generic/pci.h and rework others
     to be be more specific and more encapsulated in arches that need
     them (Stafford Horne)

  Power management:

   - Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef
     CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas)

  Virtualization:

   - Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate
     the functions but don't advertise an ACS capability (Pavan Chebbi)

  Error handling:

   - Clear PCI Status register during enumeration in case firmware left
     errors logged (Kai-Heng Feng)

   - When we have native control of AER, enable error reporting for all
     devices that support AER. Previously only a few drivers enabled
     this (Stefan Roese)

   - Keep AER error reporting enabled for switches. Previously we
     enabled this during enumeration but immediately disabled it (Stefan
     Roese)

   - Iterate over error counters instead of error strings to avoid
     printing junk in AER sysfs counters (Mohamed Khalfella)

  ASPM:

   - Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g.,
     via sysfs, are not lost across power state changes (Kai-Heng Feng)

  Endpoint framework:

   - Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie)

  Endpoint embedded DMA controller driver:

   - Simplify and clean up support for the DesignWare embedded DMA
     (eDMA) controller (Frank Li, Serge Semin)

  Broadcom STB PCIe controller driver:

   - Avoid config space accesses when link is down because we can't
     recover from the CPU aborts these cause (Jim Quinlan)

   - Look for power regulators described under Root Ports in DT and
     enable them before scanning the secondary bus (Jim Quinlan)

   - Disable/enable regulators in suspend/resume (Jim Quinlan)

  Freescale i.MX6 PCIe controller driver:

   - Simplify and clean up clock and PHY management (Richard Zhu)

   - Disable/enable regulators in suspend/resume (Richard Zhu)

   - Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu)

   - Allow speeds faster than Gen2 (Richard Zhu)

   - Make link being down a non-fatal error so controller probe doesn't
     fail if there are no Endpoints connected (Richard Zhu)

  Loongson PCIe controller driver:

   - Add ACPI and MCFG support for Loongson LS7A (Huacai Chen)

   - Avoid config reads to non-existent LS2K/LS7A devices because a
     hardware defect causes machine hangs (Huacai Chen)

   - Work around LS7A integrated devices that report incorrect Interrupt
     Pin values (Jianmin Lv)

  Marvell Aardvark PCIe controller driver:

   - Add support for AER and Slot capability on emulated bridge (Pali
     Rohár)

  MediaTek PCIe controller driver:

   - Add Airoha EN7532 to DT binding (John Crispin)

   - Allow building of driver for ARCH_AIROHA (Felix Fietkau)

  MediaTek PCIe Gen3 controller driver:

   - Print decoded LTSSM state when the link doesn't come up (Jianjun
     Wang)

  NVIDIA Tegra194 PCIe controller driver:

   - Convert DT binding to json-schema (Vidya Sagar)

   - Add DT bindings and driver support for Tegra234 Root Port and
     Endpoint mode (Vidya Sagar)

   - Fix some Root Port interrupt handling issues (Vidya Sagar)

   - Set default Max Payload Size to 256 bytes (Vidya Sagar)

   - Fix Data Link Feature capability programming (Vidya Sagar)

   - Extend Endpoint mode support to devices beyond Controller-5 (Vidya
     Sagar)

  Qualcomm PCIe controller driver:

   - Rework clock, reset, PHY power-on ordering to avoid hangs and
     improve consistency (Robert Marko, Christian Marangi)

   - Move pipe_clk handling to PHY drivers (Dmitry Baryshkov)

   - Add IPQ60xx support (Selvam Sathappan Periakaruppan)

   - Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru)

   - Add support for more than 32 MSI interrupts (Dmitry Baryshkov)

  Renesas R-Car PCIe controller driver:

   - Convert DT binding to json-schema (Herve Codina)

   - Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver
     (Herve Codina)

  Samsung Exynos PCIe controller driver:

   - Fix phy-exynos-pcie driver so it follows the 'phy_init() before
     phy_power_on()' PHY programming model (Marek Szyprowski)

  Synopsys DesignWare PCIe controller driver:

   - Simplify and clean up the DWC core extensively (Serge Semin)

   - Fix an issue with programming the ATU for regions that cross a 4GB
     boundary (Serge Semin)

   - Enable the CDM check if 'snps,enable-cdm-check' exists; previously
     we skipped it if 'num-lanes' was absent (Serge Semin)

   - Allocate a 32-bit DMA-able page to be MSI target instead of using a
     driver data structure that may not be addressable with 32-bit
     address (Will McVicker)

   - Add DWC core support for more than 32 MSI interrupts (Dmitry
     Baryshkov)

  Xilinx Versal CPM PCIe controller driver:

   - Add DT binding and driver support for Versal CPM5 Gen5 Root Port
     (Bharat Kumar Gogada)"

* tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits)
  PCI: imx6: Support more than Gen2 speed link mode
  PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers
  PCI: imx6: Reformat suspend callback to keep symmetric with resume
  PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier
  PCI: imx6: Disable clocks in reverse order of enable
  PCI: imx6: Do not hide PHY driver callbacks and refine the error handling
  PCI: imx6: Reduce resume time by only starting link if it was up before suspend
  PCI: imx6: Mark the link down as non-fatal error
  PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset()
  PCI: imx6: Turn off regulator when system is in suspend mode
  PCI: imx6: Call host init function directly in resume
  PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks
  PCI: imx6: Propagate .host_init() errors to caller
  PCI: imx6: Collect clock enables in imx6_pcie_clk_enable()
  PCI: imx6: Factor out ref clock disable to match enable
  PCI: imx6: Move imx6_pcie_clk_disable() earlier
  PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier
  PCI: imx6: Move PHY management functions together
  PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier
  PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()
  ...
2022-08-04 19:30:35 -07:00
Bjorn Helgaas
805f91bc52 Merge branch 'pci/misc'
- Drop of_match_ptr() to avoid unused variables when CONFIG_OF is unset
  (Bjorn Helgaas)

- Fix ARM pci_remap_iospace() when CONFIG_MMU unset to avoid build errors
  (Pali Rohár)

* pci/misc:
  PCI/ACPI: Update link to PCI firmware specification
  PCI: Drop of_match_ptr() to avoid unused variables
2022-08-04 11:46:53 -05:00
Bjorn Helgaas
ed89d69a15 Merge branch 'pci/ctrl/pm-ops'
- Convert to new *_PM_OPS macros to avoid need for "#ifdef CONFIG_PM_SLEEP"
  or "__maybe_unused" (Bjorn Helgaas)

* pci/ctrl/pm-ops:
  PCI: Convert to new *_PM_OPS macros
2022-08-04 11:46:52 -05:00
Bjorn Helgaas
56ebef0a82 Merge branch 'pci/ctrl/xilinx-cpm'
- Add DT binding and driver support for Versal CPM5 Gen5 Root Port (Bharat
  Kumar Gogada)

* pci/ctrl/xilinx-cpm:
  MAINTAINERS: Add Xilinx Versal CPM Root Port maintainers
  PCI: xilinx-cpm: Add support for Versal CPM5 Root Port
  dt-bindings: PCI: xilinx-cpm: Add Versal CPM5 Root Port
2022-08-04 11:46:52 -05:00
Bjorn Helgaas
a91c6db7f3 Merge branch 'pci/ctrl/vmd'
- Use devm_kasprintf() instead of simple kasprintf() (Subramanian Mohan)

- Add [8086:7D0B] and [8086:AD0B] devices to VMD driver (Francisco Munoz)

* pci/ctrl/vmd:
  PCI: vmd: Add DID 8086:7D0B and 8086:AD0B for Intel MTL SKUs
  PCI: vmd: Use devm_kasprintf() instead of simple kasprintf()
2022-08-04 11:46:51 -05:00
Bjorn Helgaas
64451ac83f Merge branch 'pci/ctrl/tegra194'
- Fix tegra_pcie_config_ep() power management in error path (Miaoqian Lin)

- Convert DT binding to json-schema (Vidya Sagar)

- Add DT bindings and driver support for Tegra234 Root Port and Endpoint
  mode (Vidya Sagar)

- Disable MSI for Tegra234 Root Ports so they use INTx for all events (PCIe
  doesn't allow mixing INTx and MSI/MSI-X) (Vidya Sagar)

- Search for Vendor-Specific RAS-DEC capability instead of hard-coding
  offset (Vidya Sagar)

- Fix unintentional APPL_INTR_STATUS_L0 value overwrite in Root Port
  interrupt handling (Vidya Sagar)

- Clear Bandwidth Management interrupt status bit to avoid interrupt storm
  (Vidya Sagar)

- Set default Max Payload Size to 256 bytes (Vidya Sagar)

- Fix offset when clearing bit in Data Link Feature capability (Vidya
  Sagar)

- Extend Endpoint mode support to devices beyond Controller-5 (Vidya Sagar)

* pci/ctrl/tegra194:
  PCI: tegra194: Add Tegra234 PCIe support
  PCI: tegra194: Extend Endpoint mode support
  PCI: tegra194: Fix link up retry sequence
  PCI: tegra194: Clean up the exit path for Endpoint mode
  PCI: tegra194: Enable support for 256 Byte payload
  PCI: tegra194: Clear bandwidth management status
  PCI: tegra194: Fix Root Port interrupt handling
  PCI: tegra194: Find RAS DES PCIe capability offset
  Revert "PCI: tegra194: Rename tegra_pcie_dw to tegra194_pcie"
  PCI: Disable MSI for Tegra234 Root Ports
  dt-bindings: PCI: tegra234: Add schema for tegra234 Endpoint mode
  dt-bindings: PCI: tegra234: Add schema for tegra234 Root Port mode
  dt-bindings: PCI: tegra194: Convert to json-schema
  PCI: tegra194: Fix PM error handling in tegra_pcie_config_ep()

# Conflicts:
#	drivers/pci/controller/dwc/pcie-designware.h
#	drivers/pci/controller/dwc/pcie-tegra194.c
2022-08-04 11:46:51 -05:00
Bjorn Helgaas
3aa321dc0a Merge branch 'pci/ctrl/rcar-gen2'
- Convert DT binding to json-schema (Herve Codina)

- Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding (Herve Codina)

- Add Renesas RZ/N1D compatible string ("renesas,pci-rzn1") to rcar-gen2
  driver (Herve Codina)

* pci/ctrl/rcar-gen2:
  PCI: rcar-gen2: Add RZ/N1 SOC family compatible string
  dt-bindings: PCI: renesas,pci-rcar-gen2: Add device tree support for R9A06G032
  dt-bindings: PCI: pci-rcar-gen2: Convert bindings to json-schema
2022-08-04 11:41:58 -05:00
Bjorn Helgaas
9195e6dd9b Merge branch 'pci/ctrl/qcom'
- Add PHY clock source implementation (Dmitry Baryshkov)

- Use new clk_regmap_phy_mux_ops for gcc-sm8450 and gcc-sc7280 PCIe pipe
  clocks (Dmitry Baryshkov)

- Set up rev 2.1.0 PARF_PHY before enabling clocks (Christian Marangi)

- Power on PHY before accessing IPQ8074 DBI registers to avoid boot hangs
  (Robert Marko)

- Power on PHY before accessing DBI registers on all variants for
  consistency (Robert Marko)

- Remove unnecessary pipe_clk handling since this is done in PHY drivers
  (Dmitry Baryshkov)

- Drop manual pipe_clk_src handling (Dmitry Baryshkov)

- Move GEN3_RELATED DBI definitions to common dwc header (Baruch Siach)

- Define slot capabilities using generic PCI_EXP_SLTCAP_* macros (Baruch
  Siach)

- Add IPQ60xx support (Selvam Sathappan Periakaruppan)

- Fix DT description typo (Baruch Siach)

- Fix DT "compatibles" typo (Johan Hovold)

- Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru)

* pci/ctrl/qcom:
  PCI: qcom: Allow ASPM L1 and substates for 2.7.0
  dt-bindings: PCI: qcom: Fix reset conditional
  dt-bindings: PCI: qcom: Fix description typo
  PCI: qcom: Add IPQ60xx support
  PCI: qcom: Define slot capabilities using PCI_EXP_SLTCAP_*
  PCI: dwc: Move GEN3_RELATED DBI definitions to common header
  PCI: qcom: Drop manual pipe_clk_src handling
  PCI: qcom: Remove unnecessary pipe_clk handling
  PCI: qcom: Power on PHY before DBI register accesses
  PCI: qcom: Power on PHY before IPQ8074 DBI register accesses
  PCI: qcom: Set up rev 2.1.0 PARF_PHY before enabling clocks
  clk: qcom: gcc-sc7280: use new clk_regmap_phy_mux_ops for PCIe pipe clocks
  clk: qcom: gcc-sm8450: use new clk_regmap_phy_mux_ops for PCIe pipe clocks
  clk: qcom: regmap: add PHY clock source implementation
2022-08-04 11:41:58 -05:00
Bjorn Helgaas
4faef10896 Merge branch 'pci/ctrl/microchip'
- Fix refcount leak in mc_pcie_init_irq_domains() (Miaoqian Lin)

* pci/ctrl/microchip:
  PCI: microchip: Fix refcount leak in mc_pcie_init_irq_domains()
2022-08-04 11:41:57 -05:00