Enable users to create queues at different priority levels.
The highest level is restricted to drm master.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Handle the queue priority set by the user.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we can track this when we create user queues.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert driver priority levels to MES11 priority levels.
At the moment they are the same, but they may not always
be.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert driver priority levels to MES11 priority levels.
At the moment they are the same, but they may not always
be.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reuse the _pad field for flags.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function fill_stream_properties_from_drm_display_mode() calls the
function drm_hdmi_avi_infoframe_from_display_mode() and the
function drm_hdmi_vendor_infoframe_from_display_mode(), but does
not check its return value. Log the error messages to prevent silent
failure if either function fails.
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enforce isolation serializes access to the GFX IP. User
queues are isolated in the MES scheduler, but we still
need to serialize between kernel queues and user queues.
For enforce isolation, group KGD user queues with KFD user
queues.
v2: split out variable renaming, add config guards
v3: use new function names
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since they will be used for both KFD and KGD user queues,
rename them from kfd to userq. No intended functional
change.
Acked-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will be used to stop/start user queue scheduling for
example when switching between kernel and user queues when
enforce isolation is enabled.
v2: use idx
v3: only stop compute/gfx queues
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Track this to align with KFD for enforce isolation
handling.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For VF, it doesn't have the permission to clear overflow, clear the bit
by reset.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace disable_kq parameter with user_queue parameter.
The parameter has the following logic:
-1 = auto (ASIC specific default)
0 = user queues disabled
1 = user queues enabled and kernel queues enabled (if supported)
2 = user queues enabled and kernel queues disabled
The default behavior (-1) is currently the same as 0 for current
ASICs. To enable user queues (in addition to kernel queues) set
user_queue=1. To enable user queues and disable kernel queues
(to make all resources available to user queues), set user_queue=2.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to take a reference to the interrupts to make
sure they stay enabled even if the kernel queues have
disabled them.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to take a reference to the interrupts to make
sure they stay enabled even if the kernel queues have
disabled them.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable doorbell for JPEG5_0_1 and adjust index for VCN5_0_1.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Increase vcn doorbell range for gfx950 to 11.
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Regardless of whether we disable kernel queues, we need
to take an extra reference to the pipe interrupts for
user queues to make sure they stay enabled in case we
disable them for kernel queues.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Regardless of whether we disable kernel queues, we need
to take an extra reference to the pipe interrupts for
user queues to make sure they stay enabled in case we
disable them for kernel queues.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
rocm-smi with superuser permission doesn't show some
of smi events, i.e. page fault/migration, because the
condition of "(events & all)" is false. Superuser
should be able to detect all events, the condiiton of
"(events & all)" seems redundant, so removing it will
fix the issue.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Missing DCE 6.0 6.1 and 6.4 are identified as UNKNOWN. Fix this.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Probably a cut and paste error from using get_integrated_info_v8's comment.
This has to be get_integrated_info_v9
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
i2c_speed_in_khz was set twice with the same values. Looking at other DCE
versions, we probably wanted to set the value for i2c_speed_in_khz_hdcp.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While not needed per speaking, all the other parameters have names but
this one.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The prefix dce110 is used on all functions, but init_pipes() and
init_hw(). Under DCN, these sames functions are prefixed.
Let's keep thing coherent.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1) Checkpatch complains if we print an error message for kzalloc()
failure. The kzalloc() failure already has it's own error messages
built in. Also this allocation is small enough that it is guaranteed
to succeed.
2) Return directly instead of doing a goto free_fence_drv. The
"fence_drv" is already NULL so no cleanup is necessary.
Reviewed-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The goto frees "fence_drv" so this is a double free bug. There is no
need to call amdgpu_seq64_free(adev, fence_drv->va) since the seq64
allocation failed so change the goto to goto free_fence_drv. Also
propagate the error code from amdgpu_seq64_alloc() instead of hard coding
it to -ENOMEM.
Fixes: e7cf21fbb2 ("drm/amdgpu: Few optimization and fixes for userq fence driver")
Reviewed-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull it out of the MES code and into the generic code.
It's not MES specific and needs to be applied to all user
queues regardless of the backend.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The mistake will lead to NULL kernel oops, so fix it.
Fixes: 4172b556fd ("drm/amdkfd: add smi events for process start and end")
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces new function pointers in the amdgpu_sdma structure
to handle queue stop, start and soft reset operations. These will replace
the older callback mechanism.
The new functions are:
- stop_kernel_queue: Stops a specific SDMA queue
- start_kernel_queue: Starts/Restores a specific SDMA queue
- soft_reset_kernel_queue: Performs soft reset on a specific SDMA queue
v2: Update stop_queue/start_queue function paramters to use ring pointer instead of device/instance(Chritian)
v3: move stop_queue/start_queue to struct amdgpu_sdma_instance and rename them. (Alex)
v4: rework the ordering a bit (Alex)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
since we loop through the queues |= the errors.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unmap user queues on suspend and map them on resume.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add helpers to unmap and map user queues on suspend and
resume.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If userq creation fails, we need to properly unwind and free the
user queue fence driver.
v2: free idr as well (Sunil)
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move some userq fence handling code into amdgpu_userq_fence.c.
This matches the other code in that file.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Split out the queue map from the mqd create call and split
out the queue unmap from the mqd destroy call. This splits
the queue setup and teardown with the actual enablement
in the firmware.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename to map and umap to better align with what is happening
at the firmware level and remove the extra level of indirection
in the MES userq code.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are a few prechecks made before HDP flush like a flush is not
required on APU bare metal. Using hdp callback directly bypasses those
checks. Use amdgpu_device_flush_hdp which takes care of prechecks.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1d9bff4cf8)
The structures are large and they do not require contiguous
memory so use vzalloc.
Fixes: 70839da636 ("drm/amd/display: Add new DCN401 sources")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4126
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 20c50a9a79)
Cc: stable@vger.kernel.org
JPEG is not supported on Vega only.
Fixes: 0a6e7b06bd ("drm/amdgpu: Remove JPEG from vega and carrizo video caps")
Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0f4dfe86fe)
Cc: stable@vger.kernel.org
On systems that default to 'deep' some userspace software likes
to try to suspend in 'deep' first. If there is a failure for any
reason (such as -ENOMEM) the failure is ignored and then it will
try to use 's2idle' as a fallback. This fails, but more importantly
it leads to graphical problems.
Forbid this behavior and only allow suspending in the last state
supported by the system.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4093
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250408180957.4027643-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2aabd44aa8)
Otherwise triggering sysfs multiple times without other submissions in
between only runs the shader once.
v2: add some comment
v3: re-add missing cast
v4: squash in semicolon fix
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8b2ae7d492)
drm-misc-next for v6.16-rc1:
UAPI Changes:
- Add ASAHI uapi header!
- Add apple fourcc modifiers.
- Add capset virtio definitions to UAPI.
- Extend EXPORT_SYNC_FILE for timeline syncobjs.
Cross-subsystem Changes:
- Adjust DMA-BUF sg handling to not cache map on attach.
- Update drm/ci, hlcdc, virtio, maintainers.
- Update fbdev todo.
- Allow setting dma-device for dma-buf import.
- Export efi_mem_desc_lookup to make efidrm build as a module.
Core Changes:
- Update drm scheduler docs.
- Use the correct resv object in TTM delayed destroy.
- Fix compiler warning with panic qr code, and other small fixes.
- drm/ci updates.
- Add debugfs file for listing all bridges.
- Small fixes to drm/client, ttm tests.
- Add documentation to display/hdmi.
- Add kunit tests for bridges.
- Dont fail managed device probing if connector polling fails.
- Create Kconfig.debug for drm core.
- Add tests for the drm scheduler.
- Add and use new access helpers for DPCPD.
- Add generic and optimized conversions for format-helper.
- Begin refcounting panel for improving lifetime handling.
- Unify simpledrm and ofdrm sysfb, and add extra features.
- Split hdmi audio in bridge to make DP audio work.
Driver Changes:
- Convert drivers to use devm_platform_ioremap_resource().
- Assorted small fixes to imx/legacy-bridg, gma500, pl111, nouveau, vc4,
vmwgfx, ast, mxsfb, xlnx, accel/qaic, v3d, bridge/imx8qxp-ldb, ofdrm,
bridge/fsl-ldb, udl, bridge/ti-sn65dsi86, bridge/anx7625, cirrus-qemu,
bridge/cdns-dsi, panel/sharp, panel/himax, bridge/sil902x, renesas,
imagination, various panels.
- Allow attaching more display to vkms.
- Add Powertip PH128800T004-ZZA01 panel.
- Add rotation quirk for ZOTAC panel.
- Convert bridge/tc358775 to atomic.
- Remove deprecated panel calls from synaptics, novatek, samsung panels.
- Refactor shmem helper page pinning and accel drivers using it.
- Add dmabuf support to accel/amdxdna.
- Use 4k page table format for panfrost/mediatek.
- Add common powerup/down dp link helper and use it.
- Assorted compiler warning fixes.
- Support dma-buf import for renesas
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# include/drm/drm_kunit_helpers.h
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/e147ff95-697b-4067-9e2e-7cbd424e162a@linux.intel.com
This patch adds recommended SDMA engines with limited XGMI SDMA engines.
It will help improve overall performance for device to device copies
with this optimization.
v2: Update the formatting issues and data type
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Suggested-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit modifies the gfx_v9_0_ring_emit_cleaner_shader function
to use a switch statement for cleaner shader emission based on the
specific GFX IP version.
The function now distinguishes between different IP versions, using
PACKET3_RUN_CLEANER_SHADER_9_0 for the versions 9.0.1, 9.1.0,
9.2.1, 9.2.2, 9.3.0, and 9.4.0, while retaining
PACKET3_RUN_CLEANER_SHADER for version 9.4.2.
v2: Simplify logic (Alex).
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit introduces the PACKET3_RUN_CLEANER_SHADER_9_0 definition,
which is a command packet utilized to instruct the GPU to execute the
cleaner shader for the GFX9.0 graphics architecture.
The cleaner shader is a piece of GPU code that is responsible for
clearing or initializing essential GPU resources, such as Local Data
Share (LDS), Vector General Purpose Registers (VGPRs), and Scalar
General Purpose Registers (SGPRs). Properly clearing these resources is
vital for ensuring data isolation and security between different
workloads executed on the GPU.
When the GPU receives this packet, it fetches and runs the cleaner
shader instructions from the specified location in the packet. Thus by
preventing data leaks and ensuring that previous job states do not
interfere with subsequent workloads.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix an array index out of bounds warning in the DMA IP case of
amdgpu_hw_ip_info() where it was incorrectly checking
adev->gfx.gfx_ring[i].no_user_submission instead of
adev->sdma.instance[i].ring.no_user_submission.
The mismatch caused UBSAN to report an array bounds violation since
it was accessing the GFX ring array with SDMA instance indices.
Fixes: 4310acd446 ("drm/amdgpu: add ring flag for no user submissions")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
rocm-smi will be able to show the events for KFD process
start/end, it is the implementation of this feature.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are a few prechecks made before HDP flush like a flush is not
required on APU bare metal. Using hdp callback directly bypasses those
checks. Use amdgpu_device_flush_hdp which takes care of prechecks.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With adding sriov_vf check, we directly return EOPNOTSUPP in
ras_reset_error_count as we should not do anything on VF to reset RAS error
count.
This also fixes the issue that loading guest driver causes register
violations.
Reviewed-by: Ahmad Rehman <Ahmad.Rehman@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Except HDP v5.2 all use a common logic for HDP flush. Use a generic
function. HDP v5.2 forces NO_KIQ logic, revisit it later.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set RAS EEPROM table version to v3 for umc v12_5.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for per-queue reset on SDMA v4.4.2 when running with:
1. MEC firmware version 17 or later
2. DPM indicates SDMA reset is supported
v2: Fixed supported firmware versions (Lijo)
Signed-off-by: Jesse.Zhang <Jesse.zhang@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable the cleaner shader for additional GFX11.5.2/11.5.3 series GPUs to
ensure data isolation among GPU tasks. The cleaner shader is tasked with
clearing the Local Data Store (LDS), Vector General Purpose Registers
(VGPRs), and Scalar General Purpose Registers (SGPRs), which helps avoid
data leakage and guarantees the accuracy of computational results.
This update extends cleaner shader support to GFX11.5.2/11.5.3 GPUs,
previously available for GFX11.0.3. It enhances security by clearing GPU
memory between processes and maintains a consistent GPU state across KGD
and KFD workloads.
Cc: Mario Sopena-Novales <mario.novales@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The structures are large and they do not require contiguous
memory so use vzalloc.
Fixes: 70839da636 ("drm/amd/display: Add new DCN401 sources")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4126
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
htmldocs build warning: "Function parameter or struct member 'fused_io'
not described in 'amdgpu_display_manager'".
[How]
Add missing description.
Fixes: ce801e5d6c ("drm/amd/display: HDCP Locality check using DMUB Fused IO")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Switch from a bool to an enum and allow more options
for enforce isolation. There are now 3 modes of operation:
- Disabled (0)
- Enabled (serialization and cleaner shader) (1)
- Enabled in legacy mode (no serialization or cleaner shader) (2)
This provides better flexibility for more use cases.
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the local setting rather than the global parameter.
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the local setting rather than the global parameter.
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
JPEG is not supported on Vega only.
Fixes: 0a6e7b06bd ("drm/amdgpu: Remove JPEG from vega and carrizo video caps")
Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement the GFX12 KCQ pipe reset, and disable the GFX12
kernel compute queue until the CPFW fully supports it.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Checking hive is more readable.
The following smatch warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:6820 amdgpu_pci_slot_reset()
warn: iterator used outside loop: 'tmp_adev'
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kernel doorbell BOs needs to be freed before ttm_fini.
Fixes: 54c30d2a8d ("drm/amdgpu: create kernel doorbell pages")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
disable ASPM with some ASICs on some specific platforms.
required from PCIe controller owner.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The MES queue deactivation and active status are already set in
mes_userq_unmap|map(), so the caller needn't set the queue_active
bit again.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add function for vcn queue reset to make driver to
do fine-grained reset instead of the whole gpu reset.
Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guest is reading/writing to snoop register which is a security violation
We moved the code to the host driver
And also added a validation on the guest side to check if it's guest
Signed-off-by: Masha Grinman <Masha.Grinman@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On systems that default to 'deep' some userspace software likes
to try to suspend in 'deep' first. If there is a failure for any
reason (such as -ENOMEM) the failure is ignored and then it will
try to use 's2idle' as a fallback. This fails, but more importantly
it leads to graphical problems.
Forbid this behavior and only allow suspending in the last state
supported by the system.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4093
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250408180957.4027643-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise triggering sysfs multiple times without other submissions in
between only runs the shader once.
v2: add some comment
v3: re-add missing cast
v4: squash in semicolon fix
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu:
- MES FW version caching fixes
- Only use GTT as a fallback if we already have a backing store
- dma_buf fix
- IP discovery fix
- Replay and PSR with VRR fix
- DC FP fixes
- eDP fixes
- KIQ TLB invalidate fix
- Enable dmem groups support
- Allow pinning VRAM dma bufs if imports can do P2P
- Workload profile fixes
- Prevent possible division by 0 in fan handling
amdkfd:
- Queue reset fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCZ/akUAAKCRC93/aFa7yZ
2HtpAP9ptJj5RKxOcdh8lbiOZN3RGjxsqw6wXk7LUnw3A2npVAD5AXoaTis4S84e
0NIY7bd1Q1njP2akA4O5AKykkpgVtgw=
=Ha4H
-----END PGP SIGNATURE-----
Merge tag 'amd-drm-fixes-6.15-2025-04-09' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.15-2025-04-09:
amdgpu:
- MES FW version caching fixes
- Only use GTT as a fallback if we already have a backing store
- dma_buf fix
- IP discovery fix
- Replay and PSR with VRR fix
- DC FP fixes
- eDP fixes
- KIQ TLB invalidate fix
- Enable dmem groups support
- Allow pinning VRAM dma bufs if imports can do P2P
- Workload profile fixes
- Prevent possible division by 0 in fan handling
amdkfd:
- Queue reset fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250409165238.1180153-1-alexander.deucher@amd.com
Don't fetch it again if we already have it. It seems the
registers don't reliably have the value at resume in some
cases.
Fixes: 785f0f9fe7 ("drm/amdgpu: Add mes v12_0 ip block support (v4)")
Reviewed-by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9e7b08d239)
Cc: stable@vger.kernel.org # 6.12.x
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1e866f1fe5 ("drm/amd/pm: Prevent divide by zero")
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit da7dc714a8)
Cc: stable@vger.kernel.org
This is normally handled in the gfx IP suspend callbacks, but
for S0ix, those are skipped because we don't want to touch
gfx. So handle it in device suspend.
Fixes: b9467983b7 ("drm/amdgpu: add dynamic workload profile switching for gfx10")
Fixes: 963537ca23 ("drm/amdgpu: add dynamic workload profile switching for gfx11")
Fixes: 5f95a15495 ("drm/amdgpu: add dynamic workload profile switching for gfx12")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 906ad45167)
Cc: stable@vger.kernel.org
Pause the workload setting in dm when doing idle optimization
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b23f81c442)
Add the callback for implementation for swsmu.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 92e511d1ce)
To be used for display idle optimizations when
we want to pause non-default profiles.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6dafb5d4c7)
When the parameter is set, disable user submissions
to kernel queues.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When the parameter is set, disable user submissions
to kernel queues.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SDMA, we still need kernel queues for paging so
they need to be initialized, but we no not want to
accept submissions from userspace when disable_kq
is set.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Plumb in support for disabling kernel queues.
v2: use ring counts per Felix' suggestion
v3: fix stream fault handler, enable EOP interrupts
v4: fix MEC interrupt offset (Sunil)
v5: clean up after removing extra sched.ready settings
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Plumb in support for disabling kernel queues in
GFX11. We have to bring up a GFX queue briefly in
order to initialize the clear state. After that
we can disable it.
v2: use ring counts per Felix' suggestion
v3: fix stream fault handler, enable EOP interrupts
v4: fix MEC interrupt offset (Sunil)
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we don't have kernel queues, the vmids can be used by
the MES for user queues.
Acked-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make all resources available to user queues.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Suggested-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add proper checks for disable_kq functionality in
gfx helper functions. Add special logic for families
that require the clear state setup.
v2: use ring count as per Felix suggestion
v3: fix num_gfx_rings handling in amdgpu_gfx_graphics_queue_acquire()
v4: fix error code (Alex)
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This would be set by IPs which only accept submissions
from the kernel, not userspace, such as when kernel
queues are disabled. Don't expose the rings to userspace
and reject any submissions in the CS IOCTL.
v2: fix error code (Alex)
Reviewed-by: Sunil Khatri<sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On chips that support user queues, setting this option
will disable kernel queues to be used to validate
user queues without kernel queues.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Similar to KFD, prevent runtime pm while user queues are active.
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we can iterate across them when we need to manage
all user queues.
v2: add uq_mgr to adev list in amdgpu_userq_mgr_init
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an INFO query to check if user queues are supported.
v2: switch to a mask of IPs (Marek)
v3: move to drm_amdgpu_info_device (Marek)
Cc: marek.olsak@amd.com
Cc: prike.liang@amd.com
Cc: sunil.khatri@amd.com
Cc: yogesh.mohanmarimuthu@amd.com
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a separate switch statement for the userq callback
assignment so that we can assign the callbacks for each
asic as the firmware becomes available.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With the ME details fixed, we can now consolidate
this state. Also split out the userq setup into a separate
switch statement so that we can set them per IP version
when the firmwares are ready.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The display is freezing because the amdgpu_userq_wait_ioctl()
is waiting for a non-user queue fence(specifically, the PT update fence).
RootCause:
The resume_work is initiated by both amdgpu_userq_suspend and
amdgpu_userqueue_ensure_ev_fence at same time. The amdgpu_userq_suspend
signals a dma-fence and subsequently triggers the resume_work, which is
intended to replace the existing fence by creating new dma-fence. However,
following this, the amdgpu_userqueue_ensure_ev_fence schedules another
resume_work that generates a new dma-fence, thereby replacing the one
created by amdgpu_userq_suspend. Consequently, the original fence will
never be signaled.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Shashank Sharma <shashank.sharma@amd.com>
Cc: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Warn if the number of pipes exceeds what the MES supports.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move it to amdgpu_mes to align with the compute and
sdma hqd masks. No functional change.
v2: rebase on new changes
v3: misc optimizations
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Sunil Khatri<sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was leftover from MES bring up when we had MES
user queues in the kernel. It's no longer used so
remove it.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leftover from the MES self tests that were removed previously.
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make sure these are set properly to ensure compatibility if
we ever update the IOCTL interface.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Encountering a taint issue during the unloading of gpu_sched
due to the fence not being released/put. In this context,
amdgpu_vm_clear_freed is responsible for creating a job to
update the page table (PT). It allocates kmem_cache for
drm_sched_fence and returns the finished fence associated
with job->base.s_fence. In case of Usermode queue this finished
fence is added to the timeline sync object through
amdgpu_gem_update_bo_mapping, which is utilized by user
space to ensure the completion of the PT update.
[ 508.900587] =============================================================================
[ 508.900605] BUG drm_sched_fence (Tainted: G N): Objects remaining in drm_sched_fence on __kmem_cache_shutdown()
[ 508.900617] -----------------------------------------------------------------------------
[ 508.900627] Slab 0xffffe0cc04548780 objects=32 used=2 fp=0xffff8ea81521f000 flags=0x17ffffc0000240(workingset|head|node=0|zone=2|lastcpupid=0x1fffff)
[ 508.900645] CPU: 3 UID: 0 PID: 2337 Comm: rmmod Tainted: G N 6.12.0+ #1
[ 508.900651] Tainted: [N]=TEST
[ 508.900653] Hardware name: Gigabyte Technology Co., Ltd. X570 AORUS ELITE/X570 AORUS ELITE, BIOS F34 06/10/2021
[ 508.900656] Call Trace:
[ 508.900659] <TASK>
[ 508.900665] dump_stack_lvl+0x70/0x90
[ 508.900674] dump_stack+0x14/0x20
[ 508.900678] slab_err+0xcb/0x110
[ 508.900687] ? srso_return_thunk+0x5/0x5f
[ 508.900692] ? try_to_grab_pending+0xd3/0x1d0
[ 508.900697] ? srso_return_thunk+0x5/0x5f
[ 508.900701] ? mutex_lock+0x17/0x50
[ 508.900708] __kmem_cache_shutdown+0x144/0x2d0
[ 508.900713] ? flush_rcu_work+0x50/0x60
[ 508.900719] kmem_cache_destroy+0x46/0x1f0
[ 508.900728] drm_sched_fence_slab_fini+0x19/0x970 [gpu_sched]
[ 508.900736] __do_sys_delete_module.constprop.0+0x184/0x320
[ 508.900744] ? srso_return_thunk+0x5/0x5f
[ 508.900747] ? debug_smp_processor_id+0x1b/0x30
[ 508.900754] __x64_sys_delete_module+0x16/0x20
[ 508.900758] x64_sys_call+0xdf/0x20d0
[ 508.900763] do_syscall_64+0x51/0x120
[ 508.900769] entry_SYSCALL_64_after_hwframe+0x76/0x7e
v2: call dma_fence_put in amdgpu_gem_va_update_vm
v3: Addressed review comments from Christian.
- calling amdgpu_gem_update_timeline_node before switch.
- puting a dma_fence in case of error or !timeline_syncobj.
v4: Addressed review comments from Christian.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Shashank Sharma <shashank.sharma@amd.com>
Cc: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This can be enabled now. We have the firmware checks
in place.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently disabled until the firmwares are officially
released.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The feature is not navi3x specific at this point.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I'd swear this was already fixed, but I guess the patch never
landed. Add it now.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Take a reference when we create a queue and drop it
when we destroy the queue. We need to keep the device
active while user queues are active.
v2: squash in fix from Sunil
v3: squash in fix from Prike
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the IP type to look up the userq functions rather
than hardcoding it.
Reviewed-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The seq64 VM cache policy should be set to UC (Uncached) to
match with userqueue fence address kernel mapped memory's
cache settings.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN and VPE have different offset range, update the doorbell
offset range repsectively.
Doorbell size for VCN and VPE is 32bit.
v1 : add gfx switch case and fix checkpatch warnings (Shashank)
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce db_info structure to the populate the doorbell
information that is required to be mapped.
Made changes to the doorbell mapping func more generic,
by taking parameters that vary based on IPs and/or usecase
into db_info structure.
v2 - Fix space alignment and checkpatch warnings(Shashank)
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That needs to be done after grabbing the lock, not before.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When applications closes, it triggers the drm_file_free
function which subsequently releases all allocated buffer
objects. Concurrently, the resume_worker thread will attempt
to map the usermode queue. However, since the wptr buffer
object has already been deallocated, this will result in
an Illegal opcode error being raised in the command stream.
Now replacing drm_release() with a new function
amdgpu_drm_release(). This function will set the flag to
prevent the scheduling of any new queue resume/map, stop
all queues and then call drm_release().
V2:
- Replace drm_release with amdgpu_drm_release(Christian).
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Apply sign extension to seq64 va address.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Modify the MES process va end limit to max pfn.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the correct fences count variable [num_fences] in the fences
array iteration to handle the userq / non-userq fences.
v2:(Christian)
- All fences in the array either come from some reservation object
or drm_syncobj. If any of those are NULL then there is a bug
somewhere else.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add mqd for userq compute queue for gfx11/gfx12
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch enables attachment and detachment of eviction fences.
This is just a fork of eviction fence enabling code from the first
patch of the series so that the CI testing can happen on fully
fledged code.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The basic idea in this redesign is to add an eviction fence only in UQ
resume path. When userqueue is not present, keep ev_fence as NULL
Main changes are:
- do not create the eviction fence during evf_mgr_init, keeping
evf_mgr->ev_fence=NULL until UQ get active.
- do not replace the ev_fence in evf_resume path, but replace it only in
uq_resume path, so remove all the unnecessary code from ev_fence_resume.
- add a new helper function (amdgpu_userqueue_ensure_ev_fence) which
will do the following:
- flush any pending uq_resume work, so that it could create an
eviction_fence
- if there is no pending uq_resume_work, add a uq_resume work and
wait for it to execute so that we always have a valid ev_fence
- call this helper function from two places, to ensure we have a valid
ev_fence:
- when a new uq is created
- when a new uq completion fence is created
v2: Worked on review comments by Christian.
v3: Addressed few more review comments by Christian.
v4: Move mutex lock outside of the amdgpu_userqueue_suspend()
function (Christian).
v5: squash in build fix (Alex)
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add a field in struct amdgpu_mqd_prop for userqueue
secure sem fence address since now we have a generic
file for mes_userqueue.c
- Add secure sem fence address mqd support to gfx12 into
their corresponding init functions.
- Enable secure semaphore IRQ handling
V2: Address review comment from Alex:
Use fence_address instead of fenceaddress (Shashank)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch enables Usermode queue support across GFX, Compute
and SDMA IPs on GFX12/SDMA7. It typically reuses Navi3X userqueue
IP functions to create and destroy MQDs.
v2: rebase on proposed changes (Alex)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Arvind Yadav <arvind.yadav@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now that all of the IP specific code has been moved into
the IP specific functions, we can make this code generic.
V2: Fixed build errors and porting logics (Shashank)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This can all be handled by in the IP specific mpd init
code.
V2: Removed setting of gds_va, which was removed during UAPI
review (Shashank)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the addresses for the UQ metadata.
V2: Fix lower offset mask (Shashank)
V2: Use lower_32_bits for mqd objects(Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the addresses for the UQ metadata.
V2: Fix lower address mask (Shashank)
V3: Use lower_32_bits for MQD objects (Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the addresses for the UQ metadata.
V2: Fix lower address mask (Shashank)
V3: Use lower_32_bits() for MQD objects (Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes one of the regressions in eviction fence code with
IGT tests.
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Amaranath Somalapuram <amaranath.somalapuram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the addresses for the UQ metadata.
V2: Fix lower address (Shashank)
V3: Restore lower_32_bits() for MQD addresses (Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are needed to make userqueue infrastructure generic.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The eviction process can get into a race condition between the eviction
fence suspend work (which replaces the old fence with new) and kms_close
(which destroys the fence and doesn't expect a new one).
This patch:
- adds a flag to indicate that fd is closing, so fence replacement is
not required (evf_mgr->fd_closing)
- adds a flush_work() during the ev_fence_destroy routine
V2: Addressed review comments from Christian:
- Do not use mutex to sync
- Use flush_work and wait for suspend_work to be done
V3: Fixed state machine for queue->active, which adds into race between
suspend/resume and queue ops
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds support for userqueue resume. What it typically does is
this:
- adds a new delayed work for resuming all the queues.
- schedules this delayed work from the suspend work.
- validates the BOs and replaces the eviction fence before resuming all
the queues running under this instance of userq manager.
V2: Addressed Christian's review comments:
- declare local variables like ret at the bottom.
- lock all the object first, then start attaching the new fence.
- dont replace old eviction fence, just attach new eviction fence.
- no error logs for drm_exec_lock failures
- no need to reserve bos after drm_exec_locked
- schedule the resume worker immediately (not after 100 ms)
- check for NULL BO (Arvind)
V5: Rebased wrt changes in suspend patch
- moved amdgpu_userqueue_validate_vm_bo in this patch
- initialized ret in resume_all
V6: Rebase
V7: Addressed review comments from Christian
- Do not use list_for_each_safe() with vm->invalidated, its not
correct way
V8: Fixed the race condition between suspend/close/fence
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Acked-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds suspend support for gfx userqueues. It typically does
the following:
- adds an enable_signaling function for the eviction fence, so that it
can trigger the userqueue suspend,
- adds a delayed work to handle suspending of the eviction_fence
- adds a suspend function to handle suspending of userqueues which
suspends all the queues under this userq manager and signals the
eviction fence,
- adds a function to replace the old eviction fence with a new one and
attach it to each of the objects,
- adds reference of userq manager in the eviction fence container so
that it can be used in the suspend function.
V2: Addressed Christian's review comments:
- schedule suspend work immediately
V4: Addressed Christian's review comments:
- wait for pending uq fences before starting suspend, added
queue->last_fence for the same
- accommodate ev_fence_mgr into existing code
- some bug fixes and NULL checks
V5: Addressed Christian's review comments (gitlab)
- Wait for eviction fence to get signaled in destroy,
don't signal it
- Wait for eviction fence to get signaled in replace fence,
don't signal it
V6: Addressed Christian's review comments
- Do not destroy the old eviction fence until we have it replaced
- Change the sequence of fence replacement sub-tasks
- reusing the ev_fence delayed work for userqueue suspend as well
(Shashank).
V7: Addressed Christian's review comments
- give evf_mgr as argument (instead of fpriv) to replace_fence()
- save ptr to evf_mgr in ev_fence (instead of uq_mgr)
- modify suspend_all_queues logic to reflect error properly
- remove the garbage drm_exec_lock section in wait_for_signal
- grab the userqueue mutex before starting the wait for fence
- remove the unrelated gobj check from signal_ioctl
V8: Added race condition fixes
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Acked-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds userqueue suspend/resume functions at
core MES V11 IP level.
V2: use true/false for queue_active status (Christian)
added Christian's R-B
V3: reset/set queue status in mqd.create and mqd.destroy
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds basic eviction fence framework for the gfx buffers.
The idea is to:
- One eviction fence is created per gfx process, at kms_open.
- This fence is attached to all the gem buffers created
by this process.
- This fence is detached to all the gem buffers at postclose_kms.
This framework will be further used for usermode queues.
V2: Addressed review comments from Christian
- keep fence_ctx and fence_seq directly in fpriv
- evcition_fence should be dynamically allocated
- do not save eviction fence instance in BO, there could be many
such fences attached to one BO
- use dma_resv_replace_fence() in detach
V3: Addressed review comments from Christian
- eviction fence create and destroy functions should be called
only once from fpriv create/destroy
- use dma_fence_put() in eviction_fence_destroy
V4: Addressed review comments from Christian:
- create a separate ev_fence_mgr structure
- cleanup fence init part
- do not add a domain for fence owner KGD
V5: Addressed review comments from Christian:
- drop the dma_fence_is_signaled check
- use a local variable to access evf_mgr->ev_fence under the
spin_lock() multiple places
- remove the vm->is_compute_ctx check to attach gfx eviction fence,
in gem_object_open
V6: Addressed review comments from Christian:
- drop the return value from eviction_fence_signal
- reserve_fence should be the first thing inside the
attach_eviction_fence function, also keep the resv_add_fence inside
the lock
- remove the unwanted ev_fence check inside detach function
- fix wrong variable check in eviction_fence_init function
- return the error value of eviction_fence_init to the caller, dont
keep it void.
- fail gem_object_open if attaching of eviction_fence fails
- detach the eviction fence only when amdgpu_vm_is_bo_always_valid
is not true.
V7: Addressed review comments from Christian:
- Do not add a uq_mgr ptr in ev_fence, rather add evf_mgr
V8: Move eviction fence enabling into separate patch for CI
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add argument description for the input argument
gpu_addr for amdgpu_seq64_alloc.
Fixes the warning raised by the compiler:
drivers/gpu/drm/amd/amdgpu/amdgpu_seq64.c:168:
warning: Function parameter or struct member 'gpu_addr' not described in 'amdgpu_seq64_alloc
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a new subquery (AMDGPU_INFO_UQ_FW_AREAS) in
AMDGPU_INFO_IOCTL to get the size and alignment of shadow
and csa objects from the FW setup. This information is
required for the userqueue consumers.
V2: Added Alex's suggestions and addressed review comments:
- make this query IP specific (GFX/SDMA etc)
- give a better title (AMDGPU_INFO_UQ_METADATA)
- restructured the code as per sample code shared by Alex
V3: Split the UAPI patch from shadow_size_fn modifications
V4: Addressed review comments from UAPI review (Marek/Pierre-Eric)
- Change the query name to AMDGPU_INFO_UQ_FW_AREAS
- remove unused inpur parameter for AMDGPU_HW_IP*
UAPI link: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/400/
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Arvind Yadav <arvind.yadav@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This callback gets the size and alignment requirements
for the gfx shadow buffer for preemption.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Modify kernel UAPI userq signal/wait struct field names and
description corresponding to the libdrm UAPI review comments.
libdrm MR: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/392
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, the shadow FW space size and alignment information is
protected under a flag (adev->gfx.cp_gfx_shadow) which gets set
only in case of SRIOV setups.
if (amdgpu_sriov_vf(adev))
adev->gfx.cp_gfx_shadow = true;
But we need this information for GFX Userqueues, so that user can
create these objects while creating userqueue. This patch series
creates a method to get this information bypassing the dependency
on this check.
This patch:
- adds a new input parameter flag to the gfx.funcs->get_gfx_shadow_info
fptr definition, so that it can accommodate the information without the
check (adev->gfx.cp_gfx_shadow) on request.
- updates the existing definition of amdgpu_gfx_get_gfx_shadow_info to
adjust with this new flag.
Next patch in the series is adding a UAPI which will consume this info.
V2: split this patch from the new UAPI patch
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Arvind Yadav <arvind.yadav@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes some of the pending UAPI review comments
from the libDRM/UAPI review process.
- It updates some outdated comments in the userqueue UAPI header
highlighted during the libdrm UAPI review.
- It removes the GDS BO support which was found unused.
- It also removes the unused flags parameter from the UAPI.
- It also adds a padding variables in userqueue in/out structures.
(Pierre-Eric and Marek)
- clarify comments on top of drm_amdgpu_userq_in
- clarify comment for queue_id (in)
- clarify comment for mqd
- clarify comment for compute MQD size
- clarify comment for queue_id (out)
- remove GDB object from BO object list
- remove the unused flags parameter
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 6be2ad4f00.
This patch was to block userspace to use doorbell manager UAPI
until usermode queue UAPI gets approved. UQ UAPI got approved in the
following MR:
https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/392
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds input fences to VM_IOCTL for buffer object.
The kernel will map/unmap the BO only when the fence is signaled.
The UAPI for the same has been approved here:
https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/392
V2: Bug fix (Arvind)
V3: Bug fix (Arvind)
V4: Rename UAPI objects as per UAPI review (Marek)
V5: Addressed review comemnts from Christian
- function should return error.
- Add 'TODO' comment
- The input fence should be independent of the operation.
V6: Addressed review comemnts from Christian
- Release the memory allocated by memdup_user().
V7: Addressed review comemnts from Christian
- Drop the debug print and add "return r;" for the error handling.
V11: Rebase
v12: Fix 32-bit holes issue in sturct drm_amdgpu_gem_va.
v13: Fix deadlock issue.
v14: Fix merge conflict.
v15: Fix review comment by renaming syncobj handles.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Keep the user queue fence signal and wait IOCTLs in the
kernel config CONFIG_DRM_AMDGPU_NAVI3X_USERQ.
v2(Christian):
- Remove the userq specific config added for kernel queues fence init
function.
v3(Alex):
- It will be better to return an error(-ENOTSUPP) in these cases.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add gpu address support to seq64 alloc function.
v1:(Christian)
- Add the user of this new interface change to the same
patch.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop AMDGPU_USERQ_BO_WRITE as this should not be a global option
of the IOCTL, It should be option per buffer. Hence adding separate
array for read and write BO handles.
v2(Marek):
- Internal kernel details shouldn't be here. This file should only
document the observed behavior, not the implementation .
v3:
- Fix DAL CI clang issue.
v4:
- Added Alex RB to merge the kernel UAPI changes since he has
already approved the amdgpu_drm.h changes.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Suggested-by: Marek Olšák <marek.olsak@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a vm root BO lock before accessing the userqueue VM.
v1:(Christian)
- Keep the VM locked until you are done with the mapping.
- Grab a temporary BO reference, drop the VM lock and acquire the BO.
When you are done with everything just drop the BO lock and
then the temporary BO reference.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the missing error handling for xa_store() call in the function
amdgpu_userq_fence_driver_alloc().
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Few optimization and fixes for userq fence driver.
v1:(Christian):
- Remove unnecessary comments.
- In drm_exec_init call give num_bo_handles as last parameter it would
making allocation of the array more efficient
- Handle return value of __xa_store() and improve the error handling of
amdgpu_userq_fence_driver_alloc().
v2:(Christian):
- Revert userq_xa xarray init to XA_FLAGS_LOCK_IRQ.
- move the xa_unlock before the error check of the call xa_err(__xa_store())
and moved this change to a separate patch as this is adding a missing error
handling.
- Removed the unnecessary comments.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove MES self test as this conflicts the userqueue fence
interrupts.
v2:(Christian)
- remove the amdgpu_mes_self_test() function and any now unused code.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates the VM_IOCTL to allow userspace to synchronize
the mapping/unmapping of a BO in the page table.
The major changes are:
- it adds a drm_timeline object as an input parameter to the VM IOCTL.
- this object is used by the kernel to sync the update of the BO in
the page table during the mapping of the object.
- the kernel also synchronizes the tlb flush of the page table entry of
this object during the unmapping (Added in this series:
https://patchwork.freedesktop.org/series/131276/ and
https://patchwork.freedesktop.org/patch/584182/)
- the userspace can wait on this timeline, and then the BO is ready to
be consumed by the GPU.
The UAPI for the same has been approved here:
https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/392
V2:
- remove the eviction fence coupling
V3:
- added the drm timeline support instead of input/output fence
(Christian)
V4:
- made timeline 64-bit (Christian)
- bug fix (Arvind)
V5: GLCTS bug fix (Arvind)
V6: Rename syncobj_handle -> timeline_syncobj_out
Rename point -> timeline_point_in (Marek)
V7: Addressed review comments from Christian:
- do not send last_update fence in case of vm_clear_freed, instead
return the fence from gen_va_update_vm
- move the functions to update bo_mapping to amdgpu_gem.c
- do not use amdgpu_userq_update_vm anymore in userq_create()
V8: Addressed review comments from Christian:
- Split amdgpu_gem_update_bo_mapping function.
- amdgpu_gem_va_update_vm should return stub for error.
V9: Addressed review comments from Christian:
- Rename the function amdgpu_gem_update_timeline_node.
- amdgpu_gem_update_timeline_node should be void function.
- when timeline_point is zero don't allocate a chain and
call drm_syncobj_replace_fence() instead of
drm_syncobj_add_point().
V11: rebase
V12: Fix 32-bit holes issue in sturct drm_amdgpu_gem_va.
V13: Fix the review comment by renaming timeline syncobj (Marek)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to handle the userqueue protected fence signal hardware
interrupt.
Create a xarray which maps the doorbell index to the fence driver address.
This would help to retrieve the fence driver information when an userq fence
interrupt is triggered. Firmware sends the doorbell offset value and
this info is compared with the queue's mqd doorbell offset value.
If they are same, we process the userq fence interrupt.
v1:(Christian):
- use xa_load to extract the fence driver.
- move the amdgpu_userq_fence_driver_process call within the xa_lock
as there is a chance that fence_drv might be freed.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add user fence wait IOCTL timeline syncobj support.
v2:(Christian)
- handle dma_fence_wait() return value.
- shorten the variable name syncobj_timeline_points a bit.
- move num_points up to avoid padding issues.
v3:(Christian)
- Handle timeline drm_syncobj_find_fence() call error
handling
- Use dma_fence_unwrap_for_each() in timeline fence as
there could be more than one fence.
v4:(Christian)
- Drop the first num_fences since fence is always included in
the dma_fence_unwrap_for_each() iteration, when fence != f
then fence is most likely just a container.
v5: Added Alex RB to merge the kernel UAPI changes since he has
already approved the amdgpu_drm.h changes.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces new IOCTL for userqueue secure semaphore.
The signal IOCTL called from userspace application creates a drm
syncobj and array of bo GEM handles and passed in as parameter to
the driver to install the fence into it.
The wait IOCTL gets an array of drm syncobjs, finds the fences
attached to the drm syncobjs and obtain the array of
memory_address/fence_value combintion which are returned to
userspace.
v2: (Christian)
- Install fence into GEM BO object.
- Lock all BO's using the dma resv subsystem
- Reorder the sequence in signal IOCTL function.
- Get write pointer from the shadow wptr
- use userq_fence to fetch the va/value in wait IOCTL.
v3: (Christian)
- Use drm_exec helper for the proper BO drm reserve and avoid BO
lock/unlock issues.
- fence/fence driver reference count logic for signal/wait IOCTLs.
v4: (Christian)
- Fixed the drm_exec calling sequence
- use dma_resv_for_each_fence_unlock if BO's are not locked
- Modified the fence_info array storing logic.
v5: (Christian)
- Keep fence_drv until wait queue execution.
- Add dma_fence_wait for other fences.
- Lock BO's using drm_exec as the number of fences in them could
change.
- Install signaled fences as well into BO/Syncobj.
- Move Syncobj fence installation code after the drm_exec_prepare_array.
- Directly add dma_resv_usage_rw(args->bo_flags....
- remove unnecessary dma_fence_put.
v6: (Christian)
- Add xarray stuff to store the fence_drv
- Implement a function to iterate over the xarray and drop
the fence_drv references.
- Add drm_exec_until_all_locked() wrapper
- Add a check that if we haven't exceeded the user allocated num_fences
before adding dma_fence to the fences array.
v7: (Christian)
- Use memdup_user() for kmalloc_array + copy_from_user
- Move the fence_drv references from the xarray into the newly created fence
and drop the fence_drv references when we signal this fence.
- Move this locking of BOs before the "if (!wait_info->num_fences)",
this way you need this code block only once.
- Merge the error handling code and the cleanup + return 0 code.
- Initializing the xa should probably be done in the userq code.
- Remove the userq back pointer stored in fence_drv.
- Pass xarray as parameter in amdgpu_userq_walk_and_drop_fence_drv()
v8: (Christian)
- Move fence_drv references must come before adding the fence to the list.
- Use xa_lock_irqsave_nested for nested spinlock operations.
- userq_mgr should be per fpriv and not one per device.
- Restructure the interrupt process code for the early exit of the loop.
- The reference acquired in the syncobj fence replace code needs to be
kept around.
- Modify the dma_fence acquire placement in wait IOCTL.
- Move USERQ_BO_WRITE flag to UAPI header file.
- drop the fence drv reference after telling the hw to stop accessing it.
- Add multi sync object support to userq signal IOCTL.
V9: (Christian)
- Store all the fence_drv ref to other drivers and not ourself.
- Remove the userq fence xa implementation and replace with
kvmalloc_array.
v10: (Christian)
- Add a comment for the userq_xa xarray
- drop the if check of userq_fence->fence_drv_array
- use the i variable to initialize userq_fence->fence_drv_array_count
- drop the fence reference before you free the array in the error handling,
otherwise it could be that some references leaked.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Screen freeze and userq fence driver crash while playing Xonotic
v2: (Christian)
- There is change that fence might signal in between testing
and grabbing the lock. Hence we can move the lock above the
if..else check and use the dma_fence_is_signaled_locked().
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add a field in struct v11_gfx_mqd for userqueue
fence address.
- Assign fence gpu VA address to the userqueue mqd
fence address fields.
v2: Remove the mask and replace with lower_32_bits (Christian)
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Developed a userqueue fence driver for the userqueue process shared
BO synchronization.
Create a dma fence having write pointer as the seqno and allocate a
seq64 memory for each user queue process and feed this memory address
into the firmware/hardware, thus the firmware writes the read pointer
into the given address when the process completes it execution.
Compare wptr and rptr, if rptr >= wptr, signal the fences for the waiting
process to consume the buffers.
v2: Worked on review comments from Christian for the following
modifications
- Add wptr as sequence number into the fence
- Add a reference count for the fence driver
- Add dma_fence_put below the list_del as it might
frees the userq fence.
- Trim unnecessary code in interrupt handler.
- Check dma fence signaled state in dma fence creation
function for a potential problem of hardware completing
the job processing beforehand.
- Add necessary locks.
- Create a list and process all the unsignaled fences.
- clean up fences in destroy function.
- implement .signaled callback function
v3: Worked on review comments from Christian
- Modify naming convention for reference counted objects
- Fix fence driver reference drop issue
- Drop amdgpu_userq_fence_driver_process() function return value
v4: Worked on review comments from Christian
- Moved fence driver allocation into amdgpu_userq_fence_driver_alloc()
- Added detail doc mentioning the differences b/w
two spinlocks declared.
v5: Worked on review comments from Christian
- Check before upcast and remove local variable
- Add error handling in fence_drv alloc function.
- Move rptr read fn outside of the loop and remove WARN_ON in
destroy function.
v6:
- clear the seq64 memory in user fence driver(Christian)
- fix for the wptr va bo mapping(Christian)
- move the fence_drv xa entry erase code from the interrupt handler
into user fence destroy function
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch:
- adds a kernel config option "CONFIG_DRM_AMDGPU_NAVI3X_USERQ"
- moves the usequeue initialization code for all IPs under
this flag
- cover the core userqueue functions under this config
- adds stub function for userqueue ioctl.
so that the userqueue works only when the config is enabled.
V9: Introduce this patch
V10: Call it CONFIG_DRM_AMDGPU_NAVI3X_USERQ instead of
CONFIG_DRM_AMDGPU_USERQ_GFX (Christian)
V11: Add GFX in the config help description message.
V12: Add depends on BROKEN for this config, remove this when the rest of
the code is available.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current MES GFX mask prevents FW to enable oversubscription. This patch
does the following:
- Fixes the mask values and adds a description for the same
- Removes the central mask setup and makes it IP specific, as it would
be different when the number of pipes and queues are different.
v2: squash in fix from Shashank
Cc: Christian König <Christian.Koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch does the necessary changes required to
enable compute workload support using the existing
usermode queues infrastructure.
V9: Patch introduced
V10: Add custom IP specific mqd strcuture for compute (Alex)
V11: Rename drm_amdgpu_userq_mqd_compute_gfx_v11 to
drm_amdgpu_userq_mqd_compute_gfx11 (Marek)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch does necessary modifications to enable the SDMA
usermode queues using the existing userqueue infrastructure.
V9: introduced this patch in the series
V10: use header file instead of extern (Alex)
V11: rename drm_amdgpu_userq_mqd_sdma_gfx_v11 to
drm_amdgpu_userq_mqd_sdma_gfx11 (Marek)
Cc: Christian König <Christian.Koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch enables GFX-v11 IP support in the usermode queue base
code. It typically:
- adds a GFX_v11 specific MQD structure
- sets IP functions to create and destroy MQDs
- sets MQD objects coming from userspace
V10: introduced this spearate patch for GFX V11 enabling (Alex).
V11: Addressed review comments:
- update the comments in GFX mqd structure informing user about using
the INFO IOCTL for object sizes (Alex)
- rename struct drm_amdgpu_userq_mqd_gfx_v11 to
drm_amdgpu_userq_mqd_gfx11 (Marek)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds code to cleanup any leftover userqueues which
a user might have missed to destroy due to a crash or any other
programming error.
V7: Added Alex's R-B
V8: Rebase
V9: Rebase
V10: Rebase
V11: Rebase
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The userspace sends us the doorbell object and the relative doobell
index in the object to be used for the usermode queue, but the FW
expects the absolute doorbell index on the PCI BAR in the MQD. This
patch adds a function to convert this relative doorbell index to
absolute doorbell index.
V5: Fix the db object reference leak (Christian)
V6: Pin the doorbell bo in userqueue_create() function, and unpin it
in userqueue destoy (Christian)
V7: Added missing kfree for queue in error cases
Added Alex's R-B
V8: Rebase
V9: Changed the function names from gfx_v11* to mes_v11*
V10: Rebase
V11: Rebase
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To support oversubscription, MES FW expects WPTR BOs to
be mapped into GART, before they are submitted to usermode
queues. This patch adds a function for the same.
V4: fix the wptr value before mapping lookup (Bas, Christian).
V5: Addressed review comments from Christian:
- Either pin object or allocate from GART, but not both.
- All the handling must be done with the VM locks held.
V7: Addressed review comments from Christian:
- Do not take vm->eviction_lock
- Use amdgpu_bo_gpu_offset to get the wptr_bo GPU offset
V8: Rebase
V9: Changed the function names from gfx_v11* to mes_v11*
V10: Remove unused adev (Harish)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds new functions to map/unmap a usermode queue into
the FW, using the MES ring. As soon as this mapping is done, the
queue would be considered ready to accept the workload.
V1: Addressed review comments from Alex on the RFC patch series
- Map/Unmap should be IP specific.
V2:
Addressed review comments from Christian:
- Fix the wptr_mc_addr calculation (moved into another patch)
Addressed review comments from Alex:
- Do not add fptrs for map/unmap
V3: Integration with doorbell manager
V4: Rebase
V5: Use gfx_v11_0 for function names (Alex)
V6: Removed queue->proc/gang/fw_ctx_address variables and doing the
address calculations locally to keep the queue structure GEN
independent (Alex)
V7: Added R-B from Alex
V8: Rebase
V9: Rebase
V10: Rebase
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The MES FW expects us to allocate at least one page as context
space to process gang and process related context data. This
patch creates a joint object for the same, and calculates GPU
space offsets of these spaces.
V1: Addressed review comments on RFC patch:
Alex: Make this function IP specific
V2: Addressed review comments from Christian
- Allocate only one object for total FW space, and calculate
offsets for each of these objects.
V3: Integration with doorbell manager
V4: Review comments:
- Remove shadow from FW space list from cover letter (Alex)
- Alignment of macro (Luben)
V5: Merged patches 5 and 6 into this single patch
Addressed review comments:
- Use lower_32_bits instead of mask (Christian)
- gfx_v11_0 instead of gfx_v11 in function names (Alex)
- Shadow and GDS objects are now coming from userspace (Christian,
Alex)
V6:
- Add a comment to replace amdgpu_bo_create_kernel() with
amdgpu_bo_create() during fw_ctx object creation (Christian).
- Move proc_ctx_gpu_addr, gang_ctx_gpu_addr and fw_ctx_gpu_addr out
of generic queue structure and make it gen11 specific (Alex).
V7:
- Using helper function to create/destroy userqueue objects.
- Removed FW object space allocation.
V8:
- Updating FW object address from user values.
V9:
- uppdated function name from gfx_v11_* to mes_v11_*
V10:
- making this patch independent of IP based changes, moving any
GFX object related changes in GFX specific patch (Alex)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Acked-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A Memory queue descriptor (MQD) of a userqueue defines it in
the hw's context. As MQD format can vary between different
graphics IPs, we need gfx GEN specific handlers to create MQDs.
This patch:
- Adds a new file which will be used for MES based userqueue
functions targeting GFX and SDMA IP.
- Introduces MQD handler functions for the usermode queues.
V1: Worked on review comments from Alex:
- Make MQD functions GEN and IP specific
V2: Worked on review comments from Alex:
- Reuse the existing adev->mqd[ip] for MQD creation
- Formatting and arrangement of code
V3:
- Integration with doorbell manager
V4: Review comments addressed:
- Do not create a new file for userq, reuse gfx_v11_0.c (Alex)
- Align name of structure members (Luben)
- Don't break up the Cc tag list and the Sob tag list in commit
message (Luben)
V5:
- No need to reserve the bo for MQD (Christian).
- Some more changes to support IP specific MQD creation.
V6:
- Add a comment reminding us to replace the amdgpu_bo_create_kernel()
calls while creating MQD object to amdgpu_bo_create() once eviction
fences are ready (Christian).
V7:
- Re-arrange userqueue functions in adev instead of uq_mgr (Alex)
- Use memdup_user instead of copy_from_user (Christian)
V9:
- Moved userqueue code from gfx_v11_0.c to new file mes_v11_0.c so
that it can be reused for SDMA userqueues as well (Shashank, Alex)
V10: Addressed review comments from Alex
- Making this patch independent of IP engine(GFX/SDMA/Compute) and
specific to MES V11 only, using the generic MQD structure.
- Splitting a spearate patch to enabling GFX support from here.
- Verify mqd va address to be non-NULL.
- Add a separate header file.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces amdgpu_userqueue_object and its helper
functions to creates and destroy this object. The helper
functions creates/destroys a base amdgpu_bo, kmap/unmap it and
save the respective GPU and CPU addresses in the encapsulating
userqueue object.
These helpers will be used to create/destroy userqueue MQD, WPTR
and FW areas.
V7:
- Forked out this new patch from V11-gfx-userqueue patch to prevent
that patch from growing very big.
- Using amdgpu_bo_create instead of amdgpu_bo_create_kernel in prep
for eviction fences (Christian)
V9:
- Rebase
V10:
- Added Alex's R-B
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds:
- A new IOCTL function to create and destroy
- A new structure to keep all the user queue data in one place.
- A function to generate unique index for the queue.
V1: Worked on review comments from RFC patch series:
- Alex: Keep a list of queues, instead of single queue per process.
- Christian: Use the queue manager instead of global ptrs,
Don't keep the queue structure in amdgpu_ctx
V2: Worked on review comments:
- Christian:
- Formatting of text
- There is no need for queuing of userqueues, with idr in place
- Alex:
- Remove use_doorbell, its unnecessary
- Reuse amdgpu_mqd_props for saving mqd fields
- Code formatting and re-arrangement
V3:
- Integration with doorbell manager
V4:
- Accommodate MQD union related changes in UAPI (Alex)
- Do not set the queue size twice (Bas)
V5:
- Remove wrapper functions for queue indexing (Christian)
- Do not save the queue id/idr in queue itself (Christian)
- Move the idr allocation in the IP independent generic space
(Christian)
V6:
- Check the validity of input IP type (Christian)
V7:
- Move uq_func from uq_mgr to adev (Alex)
- Add missing free(queue) for error cases (Yifan)
V9:
- Rebase
V10: Addressed review comments from Christian, and added R-B:
- Do not initialize the local variable
- Convert DRM_ERROR to DEBUG.
V11:
- check the input flags to be zero (Alex)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds IP independent skeleton code for amdgpu
usermode queue. It contains:
- A new files with init functions of usermode queues.
- A queue context manager in driver private data.
V1: Worked on design review comments from RFC patch series:
(https://patchwork.freedesktop.org/series/112214/)
- Alex: Keep a list of queues, instead of single queue per process.
- Christian: Use the queue manager instead of global ptrs,
Don't keep the queue structure in amdgpu_ctx
V2:
- Reformatted code, split the big patch into two
V3:
- Integration with doorbell manager
V4:
- Align the structure member names to the largest member's column
(Luben)
- Added SPDX license (Luben)
V5:
- Do not add amdgpu.h in amdgpu_userqueue.h (Christian).
- Move struct amdgpu_userq_mgr into amdgpu_userqueue.h (Christian).
V6: Rebase
V9: Rebase
V10: Rebase + Alex's R-B
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The defines, shifts and masks are already available in dce_6_0_d.h,
dce_6_0_sh_mask.h.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pretty much was already there, just not ported to amdgpu.
Tested-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Classify DCE6 resource and sequencer as they are for other DCE versions
Put dce60_resource.c and .h under amd/display/dc/resource/dce60
Put and rename dce60_hw_sequencer.c and .h under amd/display/dc/hwss/dce60
v2: fix build when CONFIG_DRM_AMD_DC_SI=n (Alex)
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If a valid header is not found during RAS eeprom init, consider it as
new and reset RAS table info.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support NPS2 RAS.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ASPM doesn't need to be disabled if pcie dpm is disabled.
So ASPM can be independantly enabled.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add interface for hardware init by vcn instance.
v2: fix code format
Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VFs query RAS error counts directly from host with
AMDGPU_RAS_VIRT_ERROR_COUNT_QUERY. When ACA is enabled,
an unusable aca_sysfs is created rather than amdgpu_ras_sysfs_create()
Likewise, VFs depend on host support to query CPERs, rather than ACA component.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Zhigang Luo <Zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
"interrupt" becomes "irq" in:
dce_vX_0_set_hpd_interrupt_state()
dce_vX_0_set_crtc_interrupt_state()
dce_vX_0_set_pageflip_interrupt_state()
It is easier when going through the code to just change the DCE number in
the functions' name to find and compare them across DCE versions.
Also, it standardizes function mapping inside a given structure where .set
and .process are both set to functions with a "_irq" suffix.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In DCE6, DCE8, DCE10, DCE11, "hdp" is replaced by "hpd" and
replace "type" by "hpd" for a uniform parameter naming usage across DCEs.
In link_factory.c, there is a missing "p" to "types"
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't fetch it again if we already have it. It seems the
registers don't reliably have the value at resume in some
cases.
Fixes: 785f0f9fe7 ("drm/amdgpu: Add mes v12_0 ip block support (v4)")
Reviewed-by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1e866f1fe5 ("drm/amd/pm: Prevent divide by zero")
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is normally handled in the gfx IP suspend callbacks, but
for S0ix, those are skipped because we don't want to touch
gfx. So handle it in device suspend.
Fixes: b9467983b7 ("drm/amdgpu: add dynamic workload profile switching for gfx10")
Fixes: 963537ca23 ("drm/amdgpu: add dynamic workload profile switching for gfx11")
Fixes: 5f95a15495 ("drm/amdgpu: add dynamic workload profile switching for gfx12")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pause the workload setting in dm when doing idle optimization
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the callback for implementation for swsmu.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To be used for display idle optimizations when
we want to pause non-default profiles.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In dev core dump, dump the full header fifo for
each queue. Each FIFO has 8 entries.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In dev core dump, dump the full header fifo for
each queue. Each FIFO has 8 entries.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In dev core dump, dump the full header fifo for
each queue. Each FIFO has 8 entries.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In dev core dump, dump the full header fifo for
each queue. Each FIFO has 8 entries.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In dev core dump, dump the full header fifo for
each queue. Each FIFO has 8 entries.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement VCN engine reset by sending MSG_ResetVCN
on smu 13.0.6.
v2: fix format for code and message
Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Summary:
* Optimize custom brightness curve
* Correct SSC enable detection for DCN351
* Turn off eDP lcdvdd and backlight if not required
* Use DMUB Fused IO interface for HDCP
* Extend eDP-on-DP1 quirk list
Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Fix the confusing entry/exit message name for IPS2
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Sherry Wang <Yao.Wang1@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
A+N configuration, eDP on A-APU is off, extended display active.
Resume from s4, eDP's backlight is still on.
[how]
Turn off inactive eDP backlight and lcdvdd.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Jing Zhou <Jing.Zhou@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix was previously in 25.20 but was reverted out as it was accompanied
by other changes that caused regression.
[why&how]
Disabling dtb as the dto src during dpms off relies on in the same
instance being able to also alter the dto src bit to dpref (or not dtb
in general), but this was recently changed to only take place in
dcn31_program_pix_clk, as that is where we want to perform any dto src
changes because tg is off at that point, it is unsafe to do that
elsewhere. What this means is now instead of disabling dtb as dto src
and modifying source bit, we are left with the configuration for a given
tg that specifies dtb as dto src and dtb dto en simultaneously is unset.
dcn31_program_pix_clk can rectify this but its possible for us to
perform some tg dependant operation that would simply hang because when
we go to enable say crtc then, the clk we specify as dto src is "off" en
bit is cleared, source bit was never changed, and program_pix_clk hasnt
been called yet (as apart of dpms on)
We cant disable it as dto src during dpms off if we want the luxury of
performing tg dependant operation during dpms off and before dpms on.
Reviewed-by: Yihan Zhu <yihan.zhu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
It is possible for an update to acquire otg lock and begin programming
while the previous update has not completed and its values have not
latched. The correct way to go about this is to wait until the vupdate
pulses so we can be sure that previous updates have latched and we can
continue with the current update pipe programming, otherwise during
consecutive full updates we will have corruption flash on the screen.
The corruption flash occurs specifically on configs that require odm
combine, and its local to a specific pipe (will not flash across whole
screen). This ticket is across the otg slave, but it may also appear
across master.
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
A variety of the 3DLUT handling functions check
`debug.enable_mem_low_power.bits.cm` both in the caller and function.
This is unnecessary overhead.
[How]
For each of them reduce to just checking just in caller or function.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
PSR support could vary from the panels connected to one GPU versus
another.
[How]
Move PSR support message into amdgpu_dm which has the scope of the
GPU and use that information.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dev_*() messages don't show that they are from a driver in drm
subsystem.
[How]
Change all dev_*() messages to drm_*() messages.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
HDCP locality check has strict timing requirements, currently broken
due to reliance on msleep which does not guarantee accuracy.
The PR moves the write-poll-read sequence into DMUB using new generic
Fused IO interface, where the timing accuracy is greatly improved.
New flow is enabled using DCN resource capability bit (none for now),
or using a debug flag.
[How]
* Extended mod_hdcp_config with new function for requesting DMUB
to execute a sequence of fused I2C/AUX commands and synchronously
wait until an outbox reply arrives or a timeout expires.
* If the timeout expires, send an abort to DMUB.
* Update HDCP to use the DMUB for locality check if supported.
* Add DC_HDCP_LC_FORCE_FW_ENABLE and DC_HDCP_LC_ENABLE_SW_FALLBACK.
* Make the first enable new flow regardless of resource capabilities.
* Make the second enable fallback to old SW flow.
* Clean up makefile source file listings for easier updates.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Due to very small clock register delta between DCN35 and DCN351, clock
spread is being checked on the wrong register for DCN351, causing the
display driver to believe that DPREFCLK downspread to be disabled when
in some stacks it is enabled. This causes the clock values for audio to
be incorrect.
[How]
Both DCN351 and DCN35 use the same clk_mgr, so we modify the DCN35
function that checks for SSC enable to read CLK6 instead of CLK5 when
using DCN351. This allows us to read for DPREFCLK downspread correctly
so the clock can properly compensate when setting values.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Kevin Gao <kevin.gao3@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When BIOS includes a lot of custom brightness data points, walking
the entire list can be time consuming. This is most noticed when
dragging a power slider. The "higher" values are "slower" to drag
around.
[How]
Move custom brightness calculation loop into a static function. Before
starting the loop check the "half way" data point to see how it compares
to the input. If greater than the half way data point use that as the
starting point instead.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CPER read will loop infinitely if an error is encountered and
the more bit is set. Add error checks to break upon failure.
v2: added function pointer checks
Suggested-by: Tony Yi <Tony.Yi@amd.com>
Signed-off-by: Victor Skvortsov <Victor.Skvortsov@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add missing colon in kernel-doc for DC_DEBUG_MASK enum.
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the below comment warning
drivers/gpu/drm/amd/amdgpu/amdgpu_sdma.c:541:
warning: Function parameter or struct member 'adev'
not described in 'amdgpu_sdma_register_on_reset_callbacks'
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the right register offsets for getting link status.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Static analysis shows that pointer "timing" cannot be NULL because it
points to the object "struct dc_crtc_timing".
Remove the extra NULL check. It is meaningless and harms the readability
of the code.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If RAS header read from EEPROM is corrupted, it could result in trying
to allocate huge memory for reading the records. Add some validation to
header fields.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove workaround code for the early engineering
samples GC v9.4.3 SOCs with revID 0
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Apurv Mishra <Apurv.Mishra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Removed unused function mpc401_get_3dlut_fast_load_status.
Signed-off-by: James Flowers <bold.zone2373@fastmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now that we are using the proper defines, cleanup useless old "substituted" defines.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace defines by the ones added earlier to GFX6, SMU6 and DCE6
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace defines for the ones under smu_6_0_d.h and smu_6_0_sh_mask.h
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enabling VCN FW workaround for drm key injection through shared
memory for vcn 4_0_5
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VFs on some IP versions are unable to access this register directly.
This register must be programmed before PSP ring is setup,
so use PSP VF mailbox directly. PSP will broadcast the register
value to all VF assigned instances.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Zhigang Luo <Zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement the GFX12 kgq pipe reset, and temporarily disable
the GFX12 pipe reset until the CPFW fully support it.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They will be used later when switching away from sid.h/si_enums.h.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function atomctrl_initialize_mc_reg_table() and
atomctrl_initialize_mc_reg_table_v2_2() does not check the return
value of smu_atom_get_data_table(). If smu_atom_get_data_table()
fails to retrieve vram_info, it returns NULL which is later
dereferenced.
Fixes: b3892e2bb5 ("drm/amd/pp: Use atombios api directly in powerplay (v2)")
Fixes: 5f92b48cf6 ("drm/amd/pm: add mc register table initialization")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement the kernel graphics queue pipe reset,and the driver
will fallback to pipe reset when the queue reset fails. However,
the ME FW hasn't fully supported pipe reset yet so disable the
KGQ pipe reset temporarily.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
- VUPDATE_NO_LOCK should be used in place of VUPDATE always
- Add VERTICAL_INTERRUPT1 and VERTICAL_INTERRUPT2 definitions
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit fe45e2af4a.
Reason for revert: it causes stuttering in some usecases.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
DCN401 uses a different structure to store the VStartup offset used to
calculate the VUpdate position, so adjust the calculations to use this
value.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In the mode validation, mst dsc is considered for bw calculation after
common dsc config is determined. Currently it considered common dsc config
is found if max and min target bpp are non zero which is not accurate. Invalid
max and min target bpp values would not get max_kbps and min_kbps calculated,
leading to falsefully pass a mode that does not have valid dsc parameters
available.
[how]
Use the return value of decide_dsc_bandwidth_range() to determine whether valid
dsc common config is found or not. Prune out modes that do not have valid common
dsc config determined.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DCN4+ supports a new register based mailbox for sending messages
from host to DMCUB. This mailbox supports 64 byte commands, which makes
it compatible with the same structure as the frame buffer based mailbox.
[HOW]
The intention for reg_inbox0 is to be slot in replacement for the frame
buffer based mailbox (Inbox1). It supports all of the required features:
- Supports all messages handled by FB Inbox1
- Supports multi command batching
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Replay need special policy for the scenario Teams,
add a flag to imply apply special policy or not.
[How]
Add a config option intended for future use for video conferencing applications.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: ChunTao Tso <ChunTao.Tso@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm_warn prints the drm device instance which is helpful when
debugging multi gpu issues
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm_info prints the drm device instance which is helpful when
debugging multi gpu issues
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Core should evaluate support based on the max clocks after considering
downspread.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This array was initially defined as size 50. There were array overflow
issues so the size was increased to 100. To ensure such issues are
avoided in the future, the size should be set based on the possible
contents instead of an arbitrary value.
[How]
- upper bound, assume every update occurs on max number of pipes
- define array sizes for function parameters, for static analysis
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Mapping of ODM enum is different for DML2.0 vs DML2.1.
Configs using DML2.1 will incorrectly trigger an assert meant for DML2.0.
[How]
Use if/else to seperate logic between DML2.0 and DML2.1.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
prefer drm_err instead of DRM_ERROR since the former prints the
associated DRM device, which is helpful when debugging multi-gpu
use cases.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
make the drm device available in create_validate_stream_for_sink()
so that drm_err() can be used
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add amdgpu_device pointer to data associated with the work struct
such that hpd handlers has access to the drm device for use with
drm_err()
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pass in a pointer to amdgpu_device directly to the function.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use gpu_metrics_v1_8 for smu_v13_0_12 to fill metrics data
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use gpu_metrics_v1_8 for smu_v13_0_6 to fill metrics data
v2: Move exposing caps to separate patch, move smu_v13.0.12 gpu metrics
1.8 usage to separate patch (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose smu_v13_0_6 caps by moving it to common header
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We shouldn't return after the last section.
We need to update the rest of the CSIB.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We shouldn't return after the last section.
We need to update the rest of the CSIB.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We shouldn't return after the last section.
We need to update the rest of the CSIB.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We shouldn't return after the last section.
We need to update the rest of the CSIB.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We shouldn't return after the last section.
We need to update the rest of the CSIB.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We shouldn't return after the last section.
We need to update the rest of the CSIB.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the actual number of queues per pipe for ME0 (gfx).
This way we will dump all of the queues properly in
dev core dumps.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The driver currently sets up one kgq per pipe. As such
adev->gfx.me.num_queue_per_pipe is hardcoded to 1 everywhere.
This is fine for kernel queues, but when we enable user queues
we need to know that actual number of queues per pipe. Decouple
the kgq setup from the actual hardware count. For dev core
dumps and user queues, we want to know the actual number
of queues per pipe.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable the cleaner shader for other GFX10.3.x series of GPUs to provide
data isolation between GPU workloads. The cleaner shader is responsible
for clearing the Local Data Store (LDS), Vector General Purpose
Registers (VGPRs), and Scalar General Purpose Registers (SGPRs), which
helps prevent data leakage and ensures accurate computation results.
This update extends cleaner shader support to GFX10.3.x GPUs, previously
available for GFX10.3.0. It enhances security by clearing GPU memory
between processes and maintains a consistent GPU state across KGD and
KFD workloads.
Cc: Mario Sopena-Novales <mario.novales@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop the cgs smu firmware code for SI, it's not used.
The smu firmware fetching for SI is done in si_dpm.c.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove more duplicated defines and move some in sid.h for coherence with
CIK.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes a typo in the word "version" in an error message.
Signed-off-by: Ananta Srikar <srikarananta01@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of using the strcpy() deprecated function to populate the
fw_name, use the strscpy() function
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy
Signed-off-by: Andres Urian Florez <andres.emb.sys@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a new parameter to disable BAR resizing. Note that this
only disables the driver from attempting to resize the BAR,
The BIOS may have resized the BAR at boot.
Some teams have found this useful in debugging P2P DMA
issues on systems where the available MMIO space did not allow
for all of the GPUs present to resize their BARs.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use shifts already available in DCE6's defines, masks and shifts.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move and rename DMA_SEM_INCOMPLETE_TIMER_CNTL and DMA_SEM_WAIT_FAIL_TIMER_CNTL
in oss_1_0_d.h
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace defines for the ones in oss_1_0_d.h and oss_1_0_sh_mask.h
Taking the opportunity to add some comments taken from cik_sdma.c
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just fix the style and add a comment for reading easiness
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They will be used later when switching away from sid.h/si_enums.h.
v2: fix whitespace (Alex)
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They will be used later when switching away from sid.h/si_enums.h.
v2: fix up whitespace (Alex)
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This cleans up DCE6.
I added some minor tweaks taken from CIK to exit early
v2: minor fixes (Alex)
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It seems a copy-paste error: since we are working with
mmGRPH_SECONDARY_SURFACE_ADDRESS,
GRPH_SECONDARY_SURFACE_ADDRESS__GRPH_SECONDARY_SURFACE_ADDRESS_MASK
should be used.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They are properly defined under oss_1_0_d.h
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PACKET3 is already in sid.h, as it is done under cikd.h for CIK
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By replacing VGA_VSTATUS_CNTL by VGA_RENDER_CONTROL__VGA_VSTATUS_CNTL_MASK,
we also need to fix its usage in GMC6.
Note: VGA_VSTATUS_CNTL's binary value was inverted in dce_6_0_sh_mask.h,
so we need to invert its value where it was used.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To be able to remove as much duplicated defines, the different files
containing definitions, shifts and masks must be properly included.
Once done, the code will be migrated where needed to shifts and masks and
proper defines, before removing useless defines in the end.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Send a few GFX6 defines where it's used in GFX6.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[BONAIRE|HAWAII]_GB_ADDR_CONFIG_GOLDEN are only used by GFX7. So keep them
where they are needed.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
cik_sdma_is_idle() does exactly what we need, so use it.
V2: fix parameter (Alex)
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gmc_v7_0_is_idle() does exactly what we need, so use it.
v2: fix parameter (Alex)
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
err_event_athub and dpc recovery will corrupt VCPU buffer,
so we need to restore fw data and clear buffer in amdgpu_vcn_resume()
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for DPC recover based on refactored code
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Split amdgpu_device_gpu_recover into the following stages:
halt activities,asic reset,schedule resume and amdgpu resume.
The reason is that the subsequent addition of dpc recover
code will have a high similarity with gpu reset
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add link reset implementation
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To get the device context, replace pr_ with dev_ functions.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Access to indirect registers by DC and other components are not synchronized.
[How]
Use sync version of indirect register access.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create a temporary scratch dc_link for programming purposes
and fix a copy of pipe_ctx on the stack to a pointer reference.
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
the guard of is_apu not in sync, caused no watermark_c output.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Try pinning into VRAM to allow P2P with RDMA NICs without ODP
support if all attachments can do P2P. If any attachment can't do
P2P just pin into GTT instead.
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Pak Nin Lui <pak.lui@amd.com>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Read the histogram for VariBright validation
[How]
Add dc/dmub functions to read histogram and ACE
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Chun-Liang Chang <Chun-Liang.Chang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Similar to xe, enable some simple management of VRAM only.
Reviewed-by: Christian König <christian.koenig@amd.com>
Co-developed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It makes DSC enable when we commit the stream which need
keep power off.And then it will skip to disable DSC if
pipe reset at this situation as power has been off. It may
cause the DSC unexpected enable on the pipe with the
next new stream which doesn't support DSC.
[HOW]
Check the DSC used on current pipe status when update stream.
Skip to enable if it has been off. The operation enable
DSC should happen when set power on.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Paul Hsieh <Paul.Hsieh@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
KIQ invalidate_tlbs request has been seen to marginally exceed the
configured 100 ms timeout on systems under load.
All other KIQ requests in the driver use a 10 second timeout. Use a
similar timeout implementation on the invalidate_tlbs path.
v2: Poll once before msleep
v3: Fix return value
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To bring in latest changes in DML21
[List of Changes]
- Unification of DML logging to use DML_LOG_* macro
- Clean up variables that are exclusively used for logging
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
USB4 BW Allocation response will be handled in HPD IRQ.
No need to handle it in DPIA notification callback.
[How]
Remove DP BW allocation response code in DPIA notification.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Cruise <Cruise.Hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
