remove_percpu_irq() has been unused since it was added in 2011 by
commit 31d9d9b6d8 ("genirq: Add support for per-cpu dev_id interrupts")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250420164656.112641-1-linux@treblig.org
Use the new guards to get and lock the interrupt descriptor and tidy up the
code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065422.670808288@linutronix.de
Use the new guards to get and lock the interrupt descriptor and tidy up the
code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065422.612184618@linutronix.de
Use the new guards to get and lock the interrupt descriptor and tidy up the
code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065422.552884529@linutronix.de
Use the new guards to get and lock the interrupt descriptor and tidy up the
code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065422.494561120@linutronix.de
Use the new guards to get and lock the interrupt descriptor and tidy up the
code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065422.435932527@linutronix.de
Use the new guards to get and lock the interrupt descriptor and tidy up the
code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065422.376836282@linutronix.de
Use the new guards to get and lock the interrupt descriptor and tidy up the
code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065422.315844964@linutronix.de
Use the new guards to get and lock the interrupt descriptor and tidy up the
code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065422.258216558@linutronix.de
Use the new guards to get and lock the interrupt descriptor and tidy up the
code.
Make the return value boolean to reflect it's meaning.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065422.187250840@linutronix.de
Use the new guards to get and lock the interrupt descriptor and tidy up the
code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/87ldrhq0hc.ffs@tglx
Use the new guards to get and lock the interrupt descriptor and tidy up the
code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065422.071157729@linutronix.de
Use the new guards to get and lock the interrupt descriptor and tidy up the
code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065422.013088277@linutronix.de
Use the new guards to get and lock the interrupt descriptor and tidy up the
code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/87ikmlq0fk.ffs@tglx
Use the new guards to get and lock the interrupt descriptor and tidy up the
code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065421.897188799@linutronix.de
Use the new guards to get and lock the interrupt descriptor and tidy up the
code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065421.830357569@linutronix.de
Use the new guards to get and lock the interrupt descriptor and tidy up the
code.
Fixup the kernel doc comment while at it.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065421.650454052@linutronix.de
Use the new guards to get and lock the interrupt descriptor and tidy up the
code.
Fixup the kernel doc comment while at it.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065421.590753128@linutronix.de
Use the new guards to get and lock the interrupt descriptor and tidy up the
code.
Fixup the kernel doc comment while at it.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065421.532308759@linutronix.de
Use the new guards to get and lock the interrupt descriptor and tidy up the
code.
Fixup the kernel doc comment while at it.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065421.473563978@linutronix.de
Use the new guards to get and lock the interrupt descriptor and tidy up the
code.
Fixup the kernel doc comment while at it.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065421.415072350@linutronix.de
Use the new guards to get and lock the interrupt descriptor and tidy up the
code.
Fixup the kernel doc comment while at it.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065421.355673840@linutronix.de
Use the new guards to get and lock the interrupt descriptor and tidy up the
code.
Fixup the kernel doc comment while at it.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065421.295400891@linutronix.de
Convert all lock/unlock pairs to guards and tidy up the code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065421.236248749@linutronix.de
Use the new helpers to decide whether the interrupt should be handled and
switch the descriptor locking to guard().
Note: The mask_irq() operation in the second condition was redundant as the
interrupt is already masked right at the beginning of the function.
Fixup the kernel doc comment while at it.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065421.175652864@linutronix.de
Use the new helpers to decide whether the interrupt should be handled and
switch the descriptor locking to guard().
Fixup the kernel doc comment while at it.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065421.105015800@linutronix.de
Use the new helpers to decide whether the interrupt should be handled and
switch the descriptor locking to guard().
Fixup the kernel doc comment while at it.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065421.045492336@linutronix.de
Use the new helpers to decide whether the interrupt should be handled and
switch the descriptor locking to guard().
Fixup the kernel doc comment while at it.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065420.986002418@linutronix.de
Use the new helpers to decide whether the interrupt should be handled and
switch the descriptor locking to guard().
Fixup the kernel doc comment while at it.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065420.926362488@linutronix.de
Use the new helpers to decide whether the interrupt should be handled and
switch the descriptor locking to guard().
Fixup the kernel doc comment while at it.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065420.865212916@linutronix.de
Use the new helpers to decide whether the interrupt should be handled and
switch the descriptor locking to guard().
Fixup the kernel doc comment while at it.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065420.804683349@linutronix.de
Use the new helpers to decide whether the interrupt should be handled and
switch the descriptor locking to guard().
Fixup the kernel doc comment while at it.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065420.744042890@linutronix.de
The interrupt flow handlers have similar patterns to decide whether to
handle an interrupt or not.
Provide common helper functions to allow removal of duplicated code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065420.682547546@linutronix.de
Convert all lock/unlock pairs to guards and tidy up the code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065420.620200108@linutronix.de
Convert all lock/unlock pairs to guards and tidy up the code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065420.560083665@linutronix.de
Convert all lock/unlock pairs to guards and tidy up the code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065420.497714413@linutronix.de
Convert all lock/unlock pairs to guards and tidy up the code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065420.373998838@linutronix.de
Convert all lock/unlock pairs to guards and tidy up the code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065420.312487167@linutronix.de
Convert all lock/unlock pairs to guards and tidy up the code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065420.251299112@linutronix.de
Replace all lock/unlock pairs with lock guards and simplify the code flow.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/871ptaqhoo.ffs@tglx
The interrupt core code has an ever repeating pattern:
unsigned long flags;
struct irq_desc *desc = irq_get_desc_[bus]lock(irq, &flags, mode);
if (!desc)
return -EINVAL;
....
irq_put_desc_[bus]unlock(desc, flags);
That requires gotos in failure paths and just creates visual clutter.
Provide lock guards, which allow to simplify the code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250429065420.061659985@linutronix.de
In the kernel fq qdisc implementation, it only needs to look at
the fields of the first node in a list but does not always
need to remove it from the list. It is more convenient to have
a peek kfunc for the list. It works similar to the bpf_rbtree_first().
This patch adds bpf_list_{front,back} kfunc. The verifier is changed
such that the kfunc returning "struct bpf_list_node *" will be
marked as non-owning. The exception is the KF_ACQUIRE kfunc. The
net effect is only the new bpf_list_{front,back} kfuncs will
have its return pointer marked as non-owning.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-8-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The next patch will add bpf_list_{front,back} kfuncs to peek the head
and tail of a list. Both of them will return a 'struct bpf_list_node *'.
Follow the earlier change for rbtree, this patch checks the
return btf type is a 'struct bpf_list_node' pointer instead
of checking each kfuncs individually to decide if
mark_reg_graph_node should be called. This will make
the bpf_list_{front,back} kfunc addition easier in
the later patch.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-7-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The bpf_rbtree_{remove,left,right} requires the root's lock to be held.
They also check the node_internal->owner is still owned by that root
before proceeding, so it is safe to allow refcounted bpf_rb_node
pointer to be used in these kfuncs.
In a bpf fq implementation which is much closer to the kernel fq,
https://lore.kernel.org/bpf/20250418224652.105998-13-martin.lau@linux.dev/,
a networking flow (allocated by bpf_obj_new) can be added to two different
rbtrees. There are cases that the flow is searched from one rbtree,
held the refcount of the flow, and then removed from another rbtree:
struct fq_flow {
struct bpf_rb_node fq_node;
struct bpf_rb_node rate_node;
struct bpf_refcount refcount;
unsigned long sk_long;
};
int bpf_fq_enqueue(...)
{
/* ... */
bpf_spin_lock(&root->lock);
while (can_loop) {
/* ... */
if (!p)
break;
gc_f = bpf_rb_entry(p, struct fq_flow, fq_node);
if (gc_f->sk_long == sk_long) {
f = bpf_refcount_acquire(gc_f);
break;
}
/* ... */
}
bpf_spin_unlock(&root->lock);
if (f) {
bpf_spin_lock(&q->lock);
bpf_rbtree_remove(&q->delayed, &f->rate_node);
bpf_spin_unlock(&q->lock);
}
}
bpf_rbtree_{left,right} do not need this change but are relaxed together
with bpf_rbtree_remove instead of adding extra verifier logic
to exclude these kfuncs.
To avoid bi-sect failure, this patch also changes the selftests together.
The "rbtree_api_remove_unadded_node" is not expecting verifier's error.
The test now expects bpf_rbtree_remove(&groot, &m->node) to return NULL.
The test uses __retval(0) to ensure this NULL return value.
Some of the "only take non-owning..." failure messages are changed also.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-5-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In a bpf fq implementation that is much closer to the kernel fq,
it will need to traverse the rbtree:
https://lore.kernel.org/bpf/20250418224652.105998-13-martin.lau@linux.dev/
The much simplified logic that uses the bpf_rbtree_{root,left,right}
to traverse the rbtree is like:
struct fq_flow {
struct bpf_rb_node fq_node;
struct bpf_rb_node rate_node;
struct bpf_refcount refcount;
unsigned long sk_long;
};
struct fq_flow_root {
struct bpf_spin_lock lock;
struct bpf_rb_root root __contains(fq_flow, fq_node);
};
struct fq_flow *fq_classify(...)
{
struct bpf_rb_node *tofree[FQ_GC_MAX];
struct fq_flow_root *root;
struct fq_flow *gc_f, *f;
struct bpf_rb_node *p;
int i, fcnt = 0;
/* ... */
f = NULL;
bpf_spin_lock(&root->lock);
p = bpf_rbtree_root(&root->root);
while (can_loop) {
if (!p)
break;
gc_f = bpf_rb_entry(p, struct fq_flow, fq_node);
if (gc_f->sk_long == sk_long) {
f = bpf_refcount_acquire(gc_f);
break;
}
/* To be removed from the rbtree */
if (fcnt < FQ_GC_MAX && fq_gc_candidate(gc_f, jiffies_now))
tofree[fcnt++] = p;
if (gc_f->sk_long > sk_long)
p = bpf_rbtree_left(&root->root, p);
else
p = bpf_rbtree_right(&root->root, p);
}
/* remove from the rbtree */
for (i = 0; i < fcnt; i++) {
p = tofree[i];
tofree[i] = bpf_rbtree_remove(&root->root, p);
}
bpf_spin_unlock(&root->lock);
/* bpf_obj_drop the fq_flow(s) that have just been removed
* from the rbtree.
*/
for (i = 0; i < fcnt; i++) {
p = tofree[i];
if (p) {
gc_f = bpf_rb_entry(p, struct fq_flow, fq_node);
bpf_obj_drop(gc_f);
}
}
return f;
}
The above simplified code needs to traverse the rbtree for two purposes,
1) find the flow with the desired sk_long value
2) while searching for the sk_long, collect flows that are
the fq_gc_candidate. They will be removed from the rbtree.
This patch adds the bpf_rbtree_{root,left,right} kfunc to enable
the rbtree traversal. The returned bpf_rb_node pointer will be a
non-owning reference which is the same as the returned pointer
of the exisiting bpf_rbtree_first kfunc.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-4-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The current rbtree kfunc, bpf_rbtree_{first, remove}, returns the
bpf_rb_node pointer. The check_kfunc_call currently checks the
kfunc btf_id instead of its return pointer type to decide
if it needs to do mark_reg_graph_node(reg0) and ref_set_non_owning(reg0).
The later patch will add bpf_rbtree_{root,left,right} that will also
return a bpf_rb_node pointer. Instead of adding more kfunc btf_id
checks to the "if" case, this patch changes the test to check the
kfunc's return type. is_rbtree_node_type() function is added to
test if a pointer type is a bpf_rb_node. The callers have already
skipped the modifiers of the pointer type.
A note on the ref_set_non_owning(), although bpf_rbtree_remove()
also returns a bpf_rb_node pointer, the bpf_rbtree_remove()
has the KF_ACQUIRE flag. Thus, its reg0 will not become non-owning.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-3-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In a later patch, two new kfuncs will take the bpf_rb_node pointer arg.
struct bpf_rb_node *bpf_rbtree_left(struct bpf_rb_root *root,
struct bpf_rb_node *node);
struct bpf_rb_node *bpf_rbtree_right(struct bpf_rb_root *root,
struct bpf_rb_node *node);
In the check_kfunc_call, there is a "case KF_ARG_PTR_TO_RB_NODE"
to check if the reg->type should be an allocated pointer or should be
a non_owning_ref.
The later patch will need to ensure that the bpf_rb_node pointer passing
to the new bpf_rbtree_{left,right} must be a non_owning_ref. This
should be the same requirement as the existing bpf_rbtree_remove.
This patch swaps the current "if else" statement. Instead of checking
the bpf_rbtree_remove, it checks the bpf_rbtree_add. Then the new
bpf_rbtree_{left,right} will fall into the "else" case to make
the later patch simpler. bpf_rbtree_add should be the only
one that needs an allocated pointer.
This should be a no-op change considering there are only two kfunc(s)
taking bpf_rb_node pointer arg, rbtree_add and rbtree_remove.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-2-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The last remaining user of vfs_submount() (tracefs) is easy to convert
to fs_context_for_submount(); do that and bury that thing, along with
SB_SUBMOUNT
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
There have been recent reports about running out of lockdep keys:
MAX_LOCKDEP_KEYS too low!
One possible reason is that too many dynamic keys have been registered.
A possible culprit is the lockdep_register_key() call in qdisc_alloc()
of net/sched/sch_generic.c.
Currently, there is no way to find out how many dynamic keys have been
registered. Add such a stat to the /proc/lockdep_stats to get better
clarity.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20250506042049.50060-4-boqun.feng@gmail.com
To catch the code trying to use a subclass value >= MAX_LOCKDEP_SUBCLASSES (8),
add a DEBUG_LOCKS_WARN_ON() statement to notify the users that such a
large value is not allowed.
[ boqun: Reword the commit log with a more objective tone ]
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20250506042049.50060-3-boqun.feng@gmail.com
When hlock_equal() is unused, it prevents kernel builds with clang,
`make W=1` and CONFIG_WERROR=y, CONFIG_LOCKDEP=y and
CONFIG_LOCKDEP_SMALL=n:
lockdep.c:2005:20: error: unused function 'hlock_equal' [-Werror,-Wunused-function]
Fix this by moving the function to the respective existing ifdeffery
for its the only user.
See also:
6863f5643d ("kbuild: allow Clang to find unused static inline functions for W=1 build")
Fixes: 68e3056785 ("lockdep: Adjust check_redundant() for recursive read change")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20250506042049.50060-2-boqun.feng@gmail.com
If one wants to trace the name of the task that wakes up a process and
pass that to the synthetic events, there's nothing currently that lets the
synthetic events do that. Add a "common_comm" to the histogram logic that
allows histograms save the current->comm as a variable that can be passed
through and added to a synthetic event:
# cd /sys/kernel/tracing
# echo 's:wake_lat char[] waker; char[] wakee; u64 delta;' >> dynamic_events
# echo 'hist:keys=pid:comm=common_comm:ts=common_timestamp.usecs if !(common_flags & 0x18)' > events/sched/sched_waking/trigger
# echo 'hist:keys=next_pid:wake_comm=$comm:delta=common_timestamp.usecs-$ts:onmatch(sched.sched_waking).trace(wake_lat,$wake_comm,next_comm,$delta)' > events/sched/sched_switch/trigger
The above will create a synthetic trace event that will save both the name
of the waker and the wakee but only if the wakeup did not happen in a hard
or soft interrupt context.
The "common_comm" is used to save the task->comm at the time of the
initial event and is passed via the "comm" variable to the second event,
and that is saved as the "waker" field in the "wake_lat" synthetic event.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250407154912.3c6c6246@gandalf.local.home
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The histogram trigger has three somewhat large arrays on the kernel stack:
unsigned long entries[HIST_STACKTRACE_DEPTH];
u64 var_ref_vals[TRACING_MAP_VARS_MAX];
char compound_key[HIST_KEY_SIZE_MAX];
Checking the function event_hist_trigger() stack frame size, it currently
uses 816 bytes for its stack frame due to these variables!
Instead, allocate a per CPU structure that holds these arrays for each
context level (normal, softirq, irq and NMI). That is, each CPU will have
4 of these structures. This will be allocated when the first histogram
trigger is enabled and freed when the last is disabled. When the
histogram callback triggers, it will request this structure. The request
will disable preemption, get the per CPU structure at the index of the
per CPU variable, and increment that variable.
The callback will use the arrays in this structure to perform its work and
then release the structure. That in turn will simply decrement the per CPU
index and enable preemption.
Moving the variables from the kernel stack to the per CPU structure brings
the stack frame of event_hist_trigger() down to just 112 bytes.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://lore.kernel.org/20250407123851.74ea8d58@gandalf.local.home
Fixes: 067fe038e7 ("tracing: Add variable reference handling to hist triggers")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The add_to_key() function tests if the key is a string or some data. If
it's a string it does some further calculations of the string size (still
truncating it to the max size it can be), and calls strncpy().
If the key isn't as string it calls memcpy(). The interesting point is
that both use the exact same parameters:
strncpy(compound_key + key_field->offset, (char *)key, size);
} else
memcpy(compound_key + key_field->offset, key, size);
As strncpy() is being used simply as a memcpy() for a string, and since
strncpy() is deprecated, just call memcpy() for both memory and string
keys.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/20250403210637.1c477d4a@gandalf.local.home
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the "fields" option is set in a trace instance, it ignores the "print fmt"
portion of the trace event and just prints the raw fields defined by the
TP_STRUCT__entry() of the TRACE_EVENT() macro.
The preempt_disable/enable and irq_disable/enable events record only the
caller offset from _stext to save space in the ring buffer. Even though
the "fields" option only prints the fields, it also tries to print what
they represent too, which includes function names.
Add a check in the output of the event field printing to see if the field
name is "caller_offs" or "parent_offs" and then print the function at the
offset from _stext of that field.
Instead of just showing:
irq_disable: caller_offs=0xba634d (12215117) parent_offs=0x39d10e2 (60625122)
Show:
irq_disable: caller_offs=trace_hardirqs_off.part.0+0xad/0x130 0xba634d (12215117) parent_offs=_raw_spin_lock_irqsave+0x62/0x70 0x39d10e2 (60625122)
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250506105131.4b6089a9@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add adjustments to the values of the "fields" output if the buffer is a
persistent ring buffer to adjust the addresses to both the kernel core and
kernel modules if they match a module in the persistent memory and that
module is also loaded.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250325185619.54b85587@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The trace_adjust_address() will take a given address and examine the
persistent ring buffer to see if the address matches a module that is
listed there. If it does not, it will just adjust the value to the core
kernel delta. But if the address was for something that was not part of
the core kernel text or data it should not be adjusted.
Check the result of the adjustment and only return the adjustment if it
lands in the current kernel text or data. If not, return the original
address.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250506102300.0ba2f9e0@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the "fields" option is enabled, the "print fmt" of the trace event is
ignored and only the fields are printed. But some fields contain function
pointers. Instead of just showing the hex value in this case, show the
function name when possible:
Instead of having:
# echo 1 > options/fields
# cat trace
[..]
kmem_cache_free: call_site=0xffffffffa9afcf31 (-1448095951) ptr=0xffff888124452910 (-131386736039664) name=kmemleak_object
Have it output:
kmem_cache_free: call_site=rcu_do_batch+0x3d1/0x14a0 (-1768960207) ptr=0xffff888132ea5ed0 (854220496) name=kmemleak_object
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250325213919.624181915@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Now that module addresses are saved in the persistent ring buffer, their
addresses can be used to adjust the address in the persistent ring buffer
to the address of the module that is currently loaded.
Instead of blindly using the text_delta that only works for core kernel
code, call the trace_adjust_address() that will see if the address matches
an address saved in the persistent ring buffer, and then uses that against
the matching module if it is loaded.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250506111648.5df7f3ec@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Now that we have pidfs_{get,register}_pid() that needs to be paired with
pidfs_put_pid() it's possible that someone pairs them with put_pid().
Thus freeing struct pid while it's still used by pidfs. Notice when that
happens. I'll also add a scheme to detect invalid uses of
pidfs_get_pid() and pidfs_put_pid() later.
Link: https://lore.kernel.org/20250506-uferbereich-guttun-7c8b1a0a431f@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add helper that allows a driver to skip calling dma_unmap_*
if the DMA layer can guarantee that they are no-nops.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
To support the upcoming non-scatterlist mapping helpers, we need to go
back to have them called outside of the DMA API. Thus move them out of
dma-map-ops.h, which is only for DMA API implementations to pci-p2pdma.h,
which is for driver use.
Note that the core helper is still not exported as the mapping is
expected to be done only by very highlevel subsystem code at least for
now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
The current scheme with a single helper to determine the P2P status
and map a scatterlist segment force users to always use the map_sg
helper to DMA map, which we're trying to get away from because they
are very cache inefficient.
Refactor the code so that there is a single helper that checks the P2P
state for a page, including the result that it is not a P2P page to
simplify the callers, and a second one to perform the address translation
for a bus mapped P2P transfer that does not depend on the scatterlist
structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
The block layer bounce buffering support is unused now, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250505081138.3435992-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently the calling conventions for ->d_automount() instances have
an odd wart - returned new mount to be attached is expected to have
refcount 2.
That kludge is intended to make sure that mark_mounts_for_expiry() called
before we get around to attaching that new mount to the tree won't decide
to take it out. finish_automount() drops the extra reference after it's
done with attaching mount to the tree - or drops the reference twice in
case of error. ->d_automount() instances have rather counterintuitive
boilerplate in them.
There's a much simpler approach: have mark_mounts_for_expiry() skip the
mounts that are yet to be mounted. And to hell with grabbing/dropping
those extra references. Makes for simpler correctness analysis, at that...
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Acked-by: David Howells <dhowells@redhat.com>
Tested-by: David Howells <dhowells@redhat.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
There is a conditional that covers all the code for the entire function.
Invert it and decrease indentation level. This also helps for further
changes to be clearer and tidier.
[ tglx: Removed line breaks ]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250416114122.2191820-2-andriy.shevchenko@linux.intel.com
- Fix read out of bounds bug in tracing_splice_read_pipe()
The size of the sub page being read can now be greater than a page. But
the buffer used in tracing_splice_read_pipe() only allocates a page size.
The data copied to the buffer is the amount in sub buffer which can
overflow the buffer. Use min((size_t)trace_seq_used(&iter->seq), PAGE_SIZE)
to limit the amount copied to the buffer to a max of PAGE_SIZE.
- Fix the test for NULL from "!filter_hash" to "!*filter_hash"
The add_next_hash() function checked for NULL at the wrong pointer level.
- Do not use the array in trace_adjust_address() if there are no elements
The trace_adjust_address() finds the offset of a module that was stored in
the persistent buffer when reading the previous boot buffer to see if the
address belongs to a module that was loaded in the previous boot. An array
is created that matches currently loaded modules with previously loaded
modules. The trace_adjust_address() uses that array to find the new offset
of the address that's in the previous buffer. But if no module was
loaded, it ends up reading the last element in an array that was never
allocated. Check if nr_entries is zero and exit out early if it is.
- Remove nested lock of trace_event_sem in print_event_fields()
The print_event_fields() function iterates over the ftrace_events list and
requires the trace_event_sem semaphore held for read. But this function is
always called with that semaphore held for read. Remove the taking of the
semaphore and replace it with lockdep_assert_held_read(&trace_event_sem);
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaBeXEBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qvXFAP9JNgi0+ainOppsEP6u9KH+sttxKl76
14EslzuPqbzgOwD/Sm00a8n7m858iv6UN3AAW9AsX2QK5yG0Wbvterm8FgI=
=s9qk
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix read out of bounds bug in tracing_splice_read_pipe()
The size of the sub page being read can now be greater than a page.
But the buffer used in tracing_splice_read_pipe() only allocates a
page size. The data copied to the buffer is the amount in sub buffer
which can overflow the buffer.
Use min((size_t)trace_seq_used(&iter->seq), PAGE_SIZE) to limit the
amount copied to the buffer to a max of PAGE_SIZE.
- Fix the test for NULL from "!filter_hash" to "!*filter_hash"
The add_next_hash() function checked for NULL at the wrong pointer
level.
- Do not use the array in trace_adjust_address() if there are no
elements
The trace_adjust_address() finds the offset of a module that was
stored in the persistent buffer when reading the previous boot buffer
to see if the address belongs to a module that was loaded in the
previous boot. An array is created that matches currently loaded
modules with previously loaded modules. The trace_adjust_address()
uses that array to find the new offset of the address that's in the
previous buffer. But if no module was loaded, it ends up reading the
last element in an array that was never allocated.
Check if nr_entries is zero and exit out early if it is.
- Remove nested lock of trace_event_sem in print_event_fields()
The print_event_fields() function iterates over the ftrace_events
list and requires the trace_event_sem semaphore held for read. But
this function is always called with that semaphore held for read.
Remove the taking of the semaphore and replace it with
lockdep_assert_held_read(&trace_event_sem)
* tag 'trace-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Do not take trace_event_sem in print_event_fields()
tracing: Fix trace_adjust_address() when there is no modules in scratch area
ftrace: Fix NULL memory allocation check
tracing: Fix oob write in trace_seq_to_buffer()
Extend the futex2 interface to be aware of mempolicy.
When FUTEX2_MPOL is specified and there is a MPOL_PREFERRED or
home_node specified covering the futex address, use that hash-map.
Notably, in this case the futex will go to the global node hashtable,
even if it is a PRIVATE futex.
When FUTEX2_NUMA|FUTEX2_MPOL is specified and the user specified node
value is FUTEX_NO_NODE, the MPOL lookup (as described above) will be
tried first before reverting to setting node to the local node.
[bigeasy: add CONFIG_FUTEX_MPOL, add MPOL to FUTEX2_VALID_MASK, write
the node only to user if FUTEX_NO_NODE was supplied]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-18-bigeasy@linutronix.de
Extend the futex2 interface to be numa aware.
When FUTEX2_NUMA is specified for a futex, the user value is extended
to two words (of the same size). The first is the user value we all
know, the second one will be the node to place this futex on.
struct futex_numa_32 {
u32 val;
u32 node;
};
When node is set to ~0, WAIT will set it to the current node_id such
that WAKE knows where to find it. If userspace corrupts the node value
between WAIT and WAKE, the futex will not be found and no wakeup will
happen.
When FUTEX2_NUMA is not set, the node is simply an extension of the
hash, such that traditional futexes are still interleaved over the
nodes.
This is done to avoid having to have a separate !numa hash-table.
[bigeasy: ensure to have at least hashsize of 4 in futex_init(), add
pr_info() for size and allocation information. Cast the naddr math to
void*]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-17-bigeasy@linutronix.de
My initial testing showed that:
perf bench futex hash
reported less operations/sec with private hash. After using the same
amount of buckets in the private hash as used by the global hash then
the operations/sec were about the same.
This changed once the private hash became resizable. This feature added
an RCU section and reference counting via atomic inc+dec operation into
the hot path.
The reference counting can be avoided if the private hash is made
immutable.
Extend PR_FUTEX_HASH_SET_SLOTS by a fourth argument which denotes if the
private should be made immutable. Once set (to true) the a further
resize is not allowed (same if set to global hash).
Add PR_FUTEX_HASH_GET_IMMUTABLE which returns true if the hash can not
be changed.
Update "perf bench" suite.
For comparison, results of "perf bench futex hash -s":
- Xeon CPU E5-2650, 2 NUMA nodes, total 32 CPUs:
- Before the introducing task local hash
shared Averaged 1.487.148 operations/sec (+- 0,53%), total secs = 10
private Averaged 2.192.405 operations/sec (+- 0,07%), total secs = 10
- With the series
shared Averaged 1.326.342 operations/sec (+- 0,41%), total secs = 10
-b128 Averaged 141.394 operations/sec (+- 1,15%), total secs = 10
-Ib128 Averaged 851.490 operations/sec (+- 0,67%), total secs = 10
-b8192 Averaged 131.321 operations/sec (+- 2,13%), total secs = 10
-Ib8192 Averaged 1.923.077 operations/sec (+- 0,61%), total secs = 10
128 is the default allocation of hash buckets.
8192 was the previous amount of allocated hash buckets.
- Xeon(R) CPU E7-8890 v3, 4 NUMA nodes, total 144 CPUs:
- Before the introducing task local hash
shared Averaged 1.810.936 operations/sec (+- 0,26%), total secs = 20
private Averaged 2.505.801 operations/sec (+- 0,05%), total secs = 20
- With the series
shared Averaged 1.589.002 operations/sec (+- 0,25%), total secs = 20
-b1024 Averaged 42.410 operations/sec (+- 0,20%), total secs = 20
-Ib1024 Averaged 740.638 operations/sec (+- 1,51%), total secs = 20
-b65536 Averaged 48.811 operations/sec (+- 1,35%), total secs = 20
-Ib65536 Averaged 1.963.165 operations/sec (+- 0,18%), total secs = 20
1024 is the default allocation of hash buckets.
65536 was the previous amount of allocated hash buckets.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://lore.kernel.org/r/20250416162921.513656-16-bigeasy@linutronix.de
The mm_struct::futex_hash_lock guards the futex_hash_bucket assignment/
replacement. The futex_hash_allocate()/ PR_FUTEX_HASH_SET_SLOTS
operation can now be invoked at runtime and resize an already existing
internal private futex_hash_bucket to another size.
The reallocation is based on an idea by Thomas Gleixner: The initial
allocation of struct futex_private_hash sets the reference count
to one. Every user acquires a reference on the local hash before using
it and drops it after it enqueued itself on the hash bucket. There is no
reference held while the task is scheduled out while waiting for the
wake up.
The resize process allocates a new struct futex_private_hash and drops
the initial reference. Synchronized with mm_struct::futex_hash_lock it
is checked if the reference counter for the currently used
mm_struct::futex_phash is marked as DEAD. If so, then all users enqueued
on the current private hash are requeued on the new private hash and the
new private hash is set to mm_struct::futex_phash. Otherwise the newly
allocated private hash is saved as mm_struct::futex_phash_new and the
rehashing and reassigning is delayed to the futex_hash() caller once the
reference counter is marked DEAD.
The replacement is not performed at rcuref_put() time because certain
callers, such as futex_wait_queue(), drop their reference after changing
the task state. This change will be destroyed once the futex_hash_lock
is acquired.
The user can change the number slots with PR_FUTEX_HASH_SET_SLOTS
multiple times. An increase and decrease is allowed and request blocks
until the assignment is done.
The private hash allocated at thread creation is changed from 16 to
16 <= 4 * number_of_threads <= global_hash_size
where number_of_threads can not exceed the number of online CPUs. Should
the user PR_FUTEX_HASH_SET_SLOTS then the auto scaling is disabled.
[peterz: reorganize the code to avoid state tracking and simplify new
object handling, block the user until changes are in effect, allow
increase and decrease of the hash].
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-15-bigeasy@linutronix.de
The futex hash is system wide and shared by all tasks. Each slot
is hashed based on futex address and the VMA of the thread. Due to
randomized VMAs (and memory allocations) the same logical lock (pointer)
can end up in a different hash bucket on each invocation of the
application. This in turn means that different applications may share a
hash bucket on the first invocation but not on the second and it is not
always clear which applications will be involved. This can result in
high latency's to acquire the futex_hash_bucket::lock especially if the
lock owner is limited to a CPU and can not be effectively PI boosted.
Introduce basic infrastructure for process local hash which is shared by
all threads of process. This hash will only be used for a
PROCESS_PRIVATE FUTEX operation.
The hashmap can be allocated via:
prctl(PR_FUTEX_HASH, PR_FUTEX_HASH_SET_SLOTS, num);
A `num' of 0 means that the global hash is used instead of a private
hash.
Other values for `num' specify the number of slots for the hash and the
number must be power of two, starting with two.
The prctl() returns zero on success. This function can only be used
before a thread is created.
The current status for the private hash can be queried via:
num = prctl(PR_FUTEX_HASH, PR_FUTEX_HASH_GET_SLOTS);
which return the current number of slots. The value 0 means that the
global hash is used. Values greater than 0 indicate the number of slots
that are used. A negative number indicates an error.
For optimisation, for the private hash jhash2() uses only two arguments
the address and the offset. This omits the VMA which is always the same.
[peterz: Use 0 for global hash. A bit shuffling and renaming. ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-13-bigeasy@linutronix.de
Factor out the futex_hash_bucket initialisation into a helpr function.
The helper function will be used in a follow up patch implementing
process private hash buckets.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-12-bigeasy@linutronix.de
futex_lock_pi() and __fixup_pi_state_owner() acquire the
futex_q::lock_ptr without holding a reference assuming the previously
obtained hash bucket and the assigned lock_ptr are still valid. This
isn't the case once the private hash can be resized and becomes invalid
after the reference drop.
Introduce futex_q_lockptr_lock() to lock the hash bucket recorded in
futex_q::lock_ptr. The lock pointer is read in a RCU section to ensure
that it does not go away if the hash bucket has been replaced and the
old pointer has been observed. After locking the pointer needs to be
compared to check if it changed. If so then the hash bucket has been
replaced and the user has been moved to the new one and lock_ptr has
been updated. The lock operation needs to be redone in this case.
The locked hash bucket is not returned.
A special case is an early return in futex_lock_pi() (due to signal or
timeout) and a successful futex_wait_requeue_pi(). In both cases a valid
futex_q::lock_ptr is expected (and its matching hash bucket) but since
the waiter has been removed from the hash this can no longer be
guaranteed. Therefore before the waiter is removed and a reference is
acquired which is later dropped by the waiter to avoid a resize.
Add futex_q_lockptr_lock() and use it.
Acquire an additional reference in requeue_pi_wake_futex() and
futex_unlock_pi() while the futex_q is removed, denote this extra
reference in futex_q::drop_hb_ref and let the waiter drop the reference
in this case.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-11-bigeasy@linutronix.de
To support runtime resizing of the process private hash, it's required
to not use the obtained hash bucket once the reference count has been
dropped. The reference will be dropped after the unlock of the hash
bucket.
The amount of waiters is decremented after the unlock operation. There
is no requirement that this needs to happen after the unlock. The
increment happens before acquiring the lock to signal early that there
will be a waiter. The waiter can avoid blocking on the lock if it is
known that there will be no waiter.
There is no difference in terms of ordering if the decrement happens
before or after the unlock.
Decrease the waiter count before the unlock operation.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-10-bigeasy@linutronix.de
futex_wait_multiple_setup() changes task_struct::__state to
!TASK_RUNNING and then enqueues on multiple futexes. Every
futex_q_lock() acquires a reference on the global hash which is
dropped later.
If a rehash is in progress then the loop will block on
mm_struct::futex_hash_bucket for the rehash to complete and this will
lose the previously set task_struct::__state.
Acquire a reference on the local hash to avoiding blocking on
mm_struct::futex_hash_bucket.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-9-bigeasy@linutronix.de
Create explicit scopes for hb variables; almost pure re-indent.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-6-bigeasy@linutronix.de
Getting the hash bucket and queuing it are two distinct actions. In
light of wanting to add a put hash bucket function later, untangle
them.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-5-bigeasy@linutronix.de
futex_wait_setup() has a weird calling convention in order to return
hb to use as an argument to futex_queue().
Mostly such that requeue can have an extra test in between.
Reorder code a little to get rid of this and keep the hb usage inside
futex_wait_setup().
[bigeasy: fixes]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-4-bigeasy@linutronix.de
The function trace_adjust_address() is used to map addresses of modules
stored in the persistent memory and are also loaded in the current boot to
return the current address for the module.
If there's only one module entry, it will simply use that, otherwise it
performs a bsearch of the entry array to find the modules to offset with.
The issue is if there are no modules in the array. The code does not
account for that and ends up referencing the first element in the array
which does not exist and causes a crash.
If nr_entries is zero, exit out early as if this was a core kernel
address.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250501151909.65910359@gandalf.local.home
Fixes: 35a380ddbc ("tracing: Show last module text symbols in the stacktrace")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In the current implementation if the program is dev-bound to a specific
device, it will not be possible to perform XDP_REDIRECT into a DEVMAP
or CPUMAP even if the program is running in the driver NAPI context and
it is not attached to any map entry. This seems in contrast with the
explanation available in bpf_prog_map_compatible routine.
Fix the issue introducing __bpf_prog_map_compatible utility routine in
order to avoid bpf_prog_is_dev_bound() check running bpf_check_tail_call()
at program load time (bpf_prog_select_runtime()).
Continue forbidding to attach a dev-bound program to XDP maps
(BPF_MAP_TYPE_PROG_ARRAY, BPF_MAP_TYPE_DEVMAP and BPF_MAP_TYPE_CPUMAP).
Fixes: 3d76a4d3d4 ("bpf: XDP metadata RX kfuncs")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
The check for a failed memory location is incorrectly checking
the wrong level of pointer indirection by checking !filter_hash
rather than !*filter_hash. Fix this.
Cc: asami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250422221335.89896-1-colin.i.king@gmail.com
Fixes: 0ae6b8ce20 ("ftrace: Fix accounting of subop hashes")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
syzbot reported this bug:
==================================================================
BUG: KASAN: slab-out-of-bounds in trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
BUG: KASAN: slab-out-of-bounds in tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
Write of size 4507 at addr ffff888032b6b000 by task syz.2.320/7260
CPU: 1 UID: 0 PID: 7260 Comm: syz.2.320 Not tainted 6.15.0-rc1-syzkaller-00301-g3bde70a2c827 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc3/0x670 mm/kasan/report.c:521
kasan_report+0xe0/0x110 mm/kasan/report.c:634
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
__asan_memcpy+0x3c/0x60 mm/kasan/shadow.c:106
trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
....
==================================================================
It has been reported that trace_seq_to_buffer() tries to copy more data
than PAGE_SIZE to buf. Therefore, to prevent this, we should use the
smaller of trace_seq_used(&iter->seq) and PAGE_SIZE as an argument.
Link: https://lore.kernel.org/20250422113026.13308-1-aha310510@gmail.com
Reported-by: syzbot+c8cd2d2c412b868263fb@syzkaller.appspotmail.com
Fixes: 3c56819b14 ("tracing: splice support for tracing_pipe")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
A sched_ext scheduler may trigger __scx_exit() from a BPF timer
callback, where scx_root may not be safely dereferenced.
This can lead to a NULL pointer dereference as shown below (triggered by
scx_tickless):
BUG: kernel NULL pointer dereference, address: 0000000000000330
...
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.14.0-virtme #1 PREEMPT(full)
RIP: 0010:__scx_exit+0x2b/0x190
...
Call Trace:
<IRQ>
scx_bpf_get_idle_smtmask+0x59/0x80
bpf_prog_8320d4217989178c_dispatch_all_cpus+0x35/0x1b6
...
bpf_prog_97f847d871513f95_sched_timerfn+0x4c/0x264
bpf_timer_cb+0x7a/0x140
__hrtimer_run_queues+0x1f9/0x3a0
hrtimer_run_softirq+0x8c/0xd0
handle_softirqs+0xd3/0x3d0
__irq_exit_rcu+0x9a/0xc0
irq_exit_rcu+0xe/0x20
Fix this by checking for a valid scx_root and adding proper RCU
protection.
Fixes: 48e1267773 ("sched_ext: Introduce scx_sched")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Using a DSQ iterators from a timer callback can trigger the following
lockdep splat when accessing scx_root:
=============================
WARNING: suspicious RCU usage
6.14.0-virtme #1 Not tainted
-----------------------------
kernel/sched/ext.c:6907 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
no locks held by swapper/0/0.
stack backtrace:
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.14.0-virtme #1 PREEMPT(full)
Sched_ext: tickless (enabled+all)
Call Trace:
<IRQ>
dump_stack_lvl+0x6f/0xb0
lockdep_rcu_suspicious.cold+0x4e/0xa3
bpf_iter_scx_dsq_new+0xb1/0xd0
bpf_prog_63f4fd1bccc101e7_dispatch_cpu+0x3e/0x156
bpf_prog_8320d4217989178c_dispatch_all_cpus+0x153/0x1b6
bpf_prog_97f847d871513f95_sched_timerfn+0x4c/0x264
? hrtimer_run_softirq+0x4f/0xd0
bpf_timer_cb+0x7a/0x140
__hrtimer_run_queues+0x1f9/0x3a0
hrtimer_run_softirq+0x8c/0xd0
handle_softirqs+0xd3/0x3d0
__irq_exit_rcu+0x9a/0xc0
irq_exit_rcu+0xe/0x20
sysvec_apic_timer_interrupt+0x73/0x80
Add a proper dereference check to explicitly validate RCU-safe access to
scx_root from rcu_read_lock() contexts and also from contexts that hold
rcu_read_lock_bh(), such as timer callbacks.
Fixes: cdf5a6faa8 ("sched_ext: Move dsq_hash into scx_sched")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
irq_domain_debug_show_one() calls msi_domain_debug_show() with a non-NULL
domain pointer and a NULL irq_data pointer. irq_debug_show_data() calls it
with a NULL domain pointer.
The domain pointer is not used, but the irq_data pointer is required to be
non-NULL and lacks a NULL pointer check.
Add the missing NULL pointer check to ensure there is a non-NULL irq_data
pointer in msi_domain_debug_show() before dereferencing it.
[ tglx: Massaged change log ]
Fixes: 01499ae673 ("genirq/msi: Expose MSI message data in debugfs")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250430124836.49964-2-ajones@ventanamicro.com
Commit a3e8fe814a ("x86/build: Raise the minimum GCC version to 8.1")
raised the minimum compiler version as enforced by Kbuild to gcc-8.1
and clang-15 for x86.
This is actually the same gcc version that has been discussed as the
minimum for all architectures several times in the past, with little
objection. A previous concern was the kernel for SLE15-SP7 needing to
be built with gcc-7. As this ended up still using linux-6.4 and there
is no plan for an SP8, this is no longer a problem.
Change it for all architectures and adjust the documentation accordingly.
A few version checks can be removed in the process. The binutils
version 2.30 is the lowest version used in combination with gcc-8 on
common distros, so use that as the corresponding minimum.
Link: https://lore.kernel.org/lkml/20240925150059.3955569-32-ardb+git@google.com/
Link: https://lore.kernel.org/lkml/871q7yxrgv.wl-tiwai@suse.de/
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A single series is present to properly handle the module_kobject creation.
It fixes a problem with missing /sys/module/<module>/drivers for built-in
modules.
The fix has been on linux-next for two weeks with no reported issues.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEIduBR9MnFA82q/jtumpXJwqY6poFAmgSH2YUHHBldHIucGF2
bHVAc3VzZS5jb20ACgkQumpXJwqY6poL/wf/TZEux9aieu8VOhPbV1Mo1npVAeT7
MJ5R4M6QKxPNvvBiXK5lWSVy5IPtcuwkbyEfKxV/CS668FwJeFpGFb91rRY108He
EUHjj5NtZ1WhEHFRBgJPLydGZGGtJzxy3yg26x6wO58VJrIx/H3HU3jgsnj1m32a
fA1cbo4Yo9gnk0YzI2KDu6A+bXi8zJVpyYDU9Ir4mdy+CVd5+vN9WypzrjHXbMya
2xhd9768sVmShY9K5+DlOXF4stVsP6CbgWGxhwIbdfLvY977QaBhrr+emrPE3uYt
5g+rg3v7ciuW14D5rLPWqZ5aXinjNt4vc7maNA9sJLW5wLOiWGXjhseUFg==
=6rT4
-----END PGP SIGNATURE-----
Merge tag 'modules-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules fixes from Petr Pavlu:
"A single series to properly handle the module_kobject creation.
This fixes a problem with missing /sys/module/<module>/drivers for
built-in modules"
* tag 'modules-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
drivers: base: handle module_kobject creation
kernel: globalize lookup_or_create_module_kobject()
kernel: refactor lookup_or_create_module_kobject()
kernel: param: rename locate_module_kobject
It was reported that in 6.12, smpboot_create_threads() was
taking much longer then in 6.6.
I narrowed down the call path to:
smpboot_create_threads()
-> kthread_create_on_cpu()
-> kthread_bind()
-> __kthread_bind_mask()
->wait_task_inactive()
Where in wait_task_inactive() we were regularly hitting the
queued case, which sets a 1 tick timeout, which when called
multiple times in a row, accumulates quickly into a long
delay.
I noticed disabling the DELAY_DEQUEUE sched feature recovered
the performance, and it seems the newly create tasks are usually
sched_delayed and left on the runqueue.
So in wait_task_inactive() when we see the task
p->se.sched_delayed, manually dequeue the sched_delayed task
with DEQUEUE_DELAYED, so we don't have to constantly wait a
tick.
Fixes: 152e11f6df ("sched/fair: Implement delayed dequeue")
Reported-by: peter-yc.chang@mediatek.com
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250429150736.3778580-1-jstultz@google.com
Using guard/scoped_guard() to simplify code. Using guard() to remove
'goto unlock' label is neater especially.
[ tglx: Brought back the scoped_guard()'s which were dropped in v2 and
simplified alarmtimer_rtc_add_device() ]
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20250430032734.2079290-4-suhui@nfschina.com
'clockid' can only be ALARM_REALTIME and ALARM_BOOTTIME. It's impossible to
return -1 and callers never check the return value.
Only alarm_clock_get_timespec(), alarm_clock_get_ktime(),
alarm_timer_create() and alarm_timer_nsleep() call clock2alarm(). These
callers use clockid_to_kclock() to get 'struct k_clock', which ensures
that clock2alarm() never returns -1.
Remove the impossible -1 return value, and add a warning to notify about any
future misuse of this function.
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250430032734.2079290-3-suhui@nfschina.com
register_refined_jiffies() is only used in setup code and always returns 0.
Mark it as __init to save some bytes and change it to void.
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250430032734.2079290-2-suhui@nfschina.com
The IMA log is currently copied to the new kernel during kexec 'load' using
ima_dump_measurement_list(). However, the IMA measurement list copied at
kexec 'load' may result in loss of IMA measurements records that only
occurred after the kexec 'load'. Move the IMA measurement list log copy
from kexec 'load' to 'execute'
Make the kexec_segment_size variable a local static variable within the
file, so it can be accessed during both kexec 'load' and 'execute'.
Define kexec_post_load() as a wrapper for calling ima_kexec_post_load() and
machine_kexec_post_load(). Replace the existing direct call to
machine_kexec_post_load() with kexec_post_load().
When there is insufficient memory to copy all the measurement logs, copy as
much of the measurement list as possible.
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Currently, the function kexec_calculate_store_digests() calculates and
stores the digest of the segment during the kexec_file_load syscall,
where the IMA segment is also allocated.
Later, the IMA segment will be updated with the measurement log at the
kexec execute stage when a kexec reboot is initiated. Therefore, the
digests should be updated for the IMA segment in the normal case. The
problem is that the content of memory segments carried over to the new
kernel during the kexec systemcall can be changed at kexec 'execute'
stage, but the size and the location of the memory segments cannot be
changed at kexec 'execute' stage.
To address this, skip the calculation and storage of the digest for the
IMA segment in kexec_calculate_store_digests() so that it is not added
to the purgatory_sha_regions.
With this change, the IMA segment is not included in the digest
calculation, storage, and verification.
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
[zohar@linux.ibm.com: Fixed Signed-off-by tag to match author's email ]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Implement kimage_map_segment() to enable IMA to map the measurement log
list to the kimage structure during the kexec 'load' stage. This function
gathers the source pages within the specified address range, and maps them
to a contiguous virtual address range.
This is a preparation for later usage.
Implement kimage_unmap_segment() for unmapping segments using vunmap().
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
With the global states and disable machinery moved into scx_sched,
scx_disable_workfn() can only be scheduled and run for the specific
scheduler instance. This makes it impossible for scx_disable_workfn() to see
SCX_EXIT_NONE. Turn that condition into WARN_ON_ONCE().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
Because disable can be triggered from any place and the scheduler cannot be
trusted, disable path uses an irq_work to bounce and a kthread_work which is
executed on an RT helper kthread to perform disable. These must be per
scheduler instance to guarantee forward progress. Move them into scx_sched.
- If an scx_sched is accessible, its helper kthread is always valid making
the `helper` check in schedule_scx_disable_work() unnecessary. As the
function becomes trivial after the removal of the test, inline it.
- scx_create_rt_helper() has only one user - creation of the disable helper
kthread. Inline it into scx_alloc_and_add_sched().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
The event counters are going to become per scheduler instance. Move
event_stats_cpu into scx_sched.
- [__]scx_add_event() are updated to take @sch. While at it, add missing
parentheses around @cnt expansions.
- scx_read_events() is updated to take @sch.
- scx_bpf_events() accesses scx_root under RCU read lock.
v2: - Replace stale scx_bpf_get_event_stat() reference in a comment with
scx_bpf_events().
- Trivial goto label rename.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
In prepration of moving event_stats_cpu into scx_sched, factor out
scx_read_events() out of scx_bpf_events() and update the in-kernel users -
scx_attr_events_show() and scx_dump_state() - to use scx_read_events()
instead of scx_bpf_events(). No observable behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
In prepration of moving event_stats_cpu into scx_sched, move scx_event_stats
definitions above scx_sched definition. No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
Global DSQs are going to become per scheduler instance. Move global_dsqs
into scx_sched. find_global_dsq() already takes a task_struct pointer as an
argument and should later be able to determine the scx_sched to use from
that. For now, assume scx_root.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
User DSQs are going to become per scheduler instance. Move dsq_hash into
scx_sched. This shifts the code that assumes scx_root to be the only
scx_sched instance up the call stack but doesn't remove them yet.
v2: Add missing rcu_read_lock() in scx_bpf_destroy_dsq() as per Andrea.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
More will be moved into scx_sched. Factor out the allocation and kobject
addition path into scx_alloc_and_add_sched().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
create_dsq() is only used by scx_bpf_create_dsq() and the separation gets in
the way of making dsq_hash per scx_sched. Inline it into
scx_bpf_create_dsq(). While at it, add unlikely() around
SCX_DSQ_FLAG_BUILTIN test.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
To prepare for supporting multiple schedulers, make scx_sched allocated
dynamically. scx_sched->kobj is now an embedded field and the kobj's
lifetime determines the lifetime of the containing scx_sched.
- Enable path is updated so that kobj init and addition are performed later.
- scx_sched freeing is initiated in scx_kobj_release() and also goes through
an rcu_work so that scx_root can be accessed from an unsynchronized path -
scx_disable().
- sched_ext_ops->priv is added and used to point to scx_sched instance
created for the ops instance. This is used by bpf_scx_unreg() to determine
the scx_sched instance to disable and put.
No behavior changes intended.
v2: Andrea reported kernel oops due to scx_bpf_unreg() trying to deref NULL
scx_root after scheduler init failure. sched_ext_ops->priv added so that
scx_bpf_unreg() can always find the scx_sched instance to unregister
even if it failed early during init.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
SCX_HAS_OP() tests scx_root->has_op bitmap. The bitmap is currently in a
statically allocated struct scx_sched and initialized while loading the BPF
scheduler and cleared while unloading, and thus can be tested anytime.
However, scx_root will be switched to dynamic allocation and thus won't
always be deferenceable.
Most usages of SCX_HAS_OP() are already protected by scx_enabled() either
directly or indirectly (e.g. through a task which is on SCX). However, there
are a couple places that could try to dereference NULL scx_root. Update them
so that scx_root is guaranteed to be valid before SCX_HAS_OP() is called.
- In handle_hotplug(), test whether scx_root is NULL before doing anything
else. This is safe because scx_root updates will be protected by
cpus_read_lock().
- In scx_tg_offline(), test scx_cgroup_enabled before invoking SCX_HAS_OP(),
which should guarnatee that scx_root won't turn NULL. This is also in line
with other cgroup operations. As the code path is synchronized against
scx_cgroup_init/exit() through scx_cgroup_rwsem, this shouldn't cause any
behavior differences.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
To support multiple scheduler instances, collect some of the global
variables that should be specific to a scheduler instance into the new
struct scx_sched. scx_root is the root scheduler instance and points to a
static instance of struct scx_sched. Except for an extra dereference through
the scx_root pointer, this patch makes no functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
The ops.cpu_online() and ops.cpu_offline() callbacks incorrectly assume
that the rq involved in the operation is locked, which is not the case
during hotplug, triggering the following warning:
WARNING: CPU: 1 PID: 20 at kernel/sched/sched.h:1504 handle_hotplug+0x280/0x340
Fix by not tracking the target rq as locked in the context of
ops.cpu_online() and ops.cpu_offline().
Fixes: 18853ba782 ("sched_ext: Track currently locked rq")
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Tested-by: Changwoo Min <changwoo@igalia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Similar to commit 221a164035 ("entry: Move syscall_enter_from_user_mode()
to header file"), move syscall_exit_to_user_mode() to the header file as
well.
Testing was done with the byte-unixbench syscall benchmark (which calls
getpid) and QEMU. On riscv I measured a 7.09246% improvement, on x86 a
2.98843% improvement, on loongarch a 6.07954% improvement, and on s390 a
11.1328% improvement.
The Intel bot also reported "kernel test robot noticed a 1.9% improvement
of stress-ng.seek.ops_per_sec".
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/all/20250320-riscv_optimize_entry-v6-4-63e187e26041@rivosinc.com
Link: https://lore.kernel.org/linux-riscv/202502051555.85ae6844-lkp@intel.com/
When the device is of a non-CPU type, table[i].performance won't be
initialized in the previous em_init_performance(), resulting in division
by zero when calculating costs in em_compute_costs().
Since the 'cost' algorithm is only used for EAS energy efficiency
calculations and is currently not utilized by other device drivers, we
should add the _is_cpu_device(dev) check to prevent this division-by-zero
issue.
Fixes: 1b600da510 ("PM: EM: Optimize em_cpu_energy() and remove division")
Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/tencent_7F99ED4767C1AF7889D0D8AD50F34859CE06@qq.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Lei Chen raised an issue with CLOCK_MONOTONIC_COARSE seeing time
inconsistencies. Lei tracked down that this was being caused by the
adjustment:
tk->tkr_mono.xtime_nsec -= offset;
which is made to compensate for the unaccumulated cycles in offset when the
multiplicator is adjusted forward, so that the non-_COARSE clockids don't
see inconsistencies.
However, the _COARSE clockid getter functions use the adjusted xtime_nsec
value directly and do not compensate the negative offset via the
clocksource delta multiplied with the new multiplicator. In that case the
caller can observe time going backwards in consecutive calls.
By design, this negative adjustment should be fine, because the logic run
from timekeeping_adjust() is done after it accumulated approximately
multiplicator * interval_cycles
into xtime_nsec. The accumulated value is always larger then the
mult_adj * offset
value, which is subtracted from xtime_nsec. Both operations are done
together under the tk_core.lock, so the net change to xtime_nsec is always
always be positive.
However, do_adjtimex() calls into timekeeping_advance() as well, to
apply the NTP frequency adjustment immediately. In this case,
timekeeping_advance() does not return early when the offset is smaller
then interval_cycles. In that case there is no time accumulated into
xtime_nsec. But the subsequent call into timekeeping_adjust(), which
modifies the multiplicator, subtracts from xtime_nsec to correct for the
new multiplicator.
Here because there was no accumulation, xtime_nsec becomes smaller than
before, which opens a window up to the next accumulation, where the
_COARSE clockid getters, which don't compensate for the offset, can
observe the inconsistency.
This has been tried to be fixed by forwarding the timekeeper in the case
that adjtimex() adjusts the multiplier, which resets the offset to zero:
757b000f7b ("timekeeping: Fix possible inconsistencies in _COARSE clockids")
That works correctly, but unfortunately causes a regression on the
adjtimex() side. There are two issues:
1) The forwarding of the base time moves the update out of the original
period and establishes a new one.
2) The clearing of the accumulated NTP error is changing the behaviour as
well.
User-space expects that multiplier/frequency updates are in effect, when the
syscall returns, so delaying the update to the next tick is not solving the
problem either.
Commit 757b000f7b was reverted so that the established expectations of
user space implementations (ntpd, chronyd) are restored, but that obviously
brought the inconsistencies back.
One of the initial approaches to fix this was to establish a separate
storage for the coarse time getter nanoseconds part by calculating it from
the offset. That was dropped on the floor because not having yet another
state to maintain was simpler. But given the result of the above exercise,
this solution turns out to be the right one. Bring it back in a slightly
modified form.
Thus introduce timekeeper::coarse_nsec and store that nanoseconds part in
it, switch the time getter functions and the VDSO update to use that value.
coarse_nsec is set on operations which forward or initialize the timekeeper
and after time was accumulated during a tick. If there is no accumulation
the timestamp is unchanged.
This leaves the adjtimex() behaviour unmodified and prevents coarse time
from going backwards.
[ jstultz: Simplified the coarse_nsec calculation and kept behavior so
coarse clockids aren't adjusted on each inter-tick adjtimex
call, slightly reworked the comments and commit message ]
Fixes: da15cfdae0 ("time: Introduce CLOCK_REALTIME_COARSE")
Reported-by: Lei Chen <lei.chen@smartx.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/20250419054706.2319105-1-jstultz@google.com
Closes: https://lore.kernel.org/lkml/20250310030004.3705801-1-lei.chen@smartx.com/
[ Arguably if pick_eevdf()/pick_next_entity() was less trusting
of complex math being correct it could have de-escalated a
crash into a warning, but that's for a different patch. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=pJ11
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Fix sporadic crashes in dequeue_entities() due to ... bad math.
[ Arguably if pick_eevdf()/pick_next_entity() was less trusting of
complex math being correct it could have de-escalated a crash into
a warning, but that's for a different patch ]"
* tag 'sched-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/eevdf: Fix se->slice being set to U64_MAX and resulting crash
- Use POLLERR for events in error state, instead of
the ambiguous POLLHUP error value
- Fix non-sampling (counting) events on certain x86 platforms
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=LLOs
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc perf events fixes from Ingo Molnar:
- Use POLLERR for events in error state, instead of the ambiguous
POLLHUP error value
- Fix non-sampling (counting) events on certain x86 platforms
* tag 'perf-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix non-sampling (counting) events on certain x86 platforms
perf/core: Change to POLLERR for pinned events with error
There is a code path in dequeue_entities() that can set the slice of a
sched_entity to U64_MAX, which sometimes results in a crash.
The offending case is when dequeue_entities() is called to dequeue a
delayed group entity, and then the entity's parent's dequeue is delayed.
In that case:
1. In the if (entity_is_task(se)) else block at the beginning of
dequeue_entities(), slice is set to
cfs_rq_min_slice(group_cfs_rq(se)). If the entity was delayed, then
it has no queued tasks, so cfs_rq_min_slice() returns U64_MAX.
2. The first for_each_sched_entity() loop dequeues the entity.
3. If the entity was its parent's only child, then the next iteration
tries to dequeue the parent.
4. If the parent's dequeue needs to be delayed, then it breaks from the
first for_each_sched_entity() loop _without updating slice_.
5. The second for_each_sched_entity() loop sets the parent's ->slice to
the saved slice, which is still U64_MAX.
This throws off subsequent calculations with potentially catastrophic
results. A manifestation we saw in production was:
6. In update_entity_lag(), se->slice is used to calculate limit, which
ends up as a huge negative number.
7. limit is used in se->vlag = clamp(vlag, -limit, limit). Because limit
is negative, vlag > limit, so se->vlag is set to the same huge
negative number.
8. In place_entity(), se->vlag is scaled, which overflows and results in
another huge (positive or negative) number.
9. The adjusted lag is subtracted from se->vruntime, which increases or
decreases se->vruntime by a huge number.
10. pick_eevdf() calls entity_eligible()/vruntime_eligible(), which
incorrectly returns false because the vruntime is so far from the
other vruntimes on the queue, causing the
(vruntime - cfs_rq->min_vruntime) * load calulation to overflow.
11. Nothing appears to be eligible, so pick_eevdf() returns NULL.
12. pick_next_entity() tries to dereference the return value of
pick_eevdf() and crashes.
Dumping the cfs_rq states from the core dumps with drgn showed tell-tale
huge vruntime ranges and bogus vlag values, and I also traced se->slice
being set to U64_MAX on live systems (which was usually "benign" since
the rest of the runqueue needed to be in a particular state to crash).
Fix it in dequeue_entities() by always setting slice from the first
non-empty cfs_rq.
Fixes: aef6987d89 ("sched/eevdf: Propagate min_slice up the cgroup hierarchy")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/f0c2d1072be229e1bdddc73c0703919a8b00c652.1745570998.git.osandov@fb.com
Fold it into pidfd_prepare() and rename PIDFD_CLONE to PIDFD_STALE to
indicate that the passed pid might not have task linkage and no explicit
check for that should be performed.
Link: https://lore.kernel.org/20250425-work-pidfs-net-v2-3-450a19461e75@kernel.org
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: David Rheinsberg <david@readahead.eu>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The cgroup_rstat_push_children() function converts a set of
updated_children lists from different cgroups into a single ordered
list of cgroups to be flushed via the rstat_flush_next pointer.
The algorithm used isn't that well illustrated and it takes time to
grasp what it is doing. Improve the embedded documentation and variable
names to better illustrate the transformation process and make the code
easier to understand.
Also cgroup_rstat_lock must be held for the whole duration
from where the rstat_flush_next list is being constructed in
cgroup_rstat_push_children() to when it is consumed later in
css_rstat_flush(). Otherwise, list corruption can happen leading to
system crash as reported in [1]. In this particular case, the branch
being used has commit 093c8812de ("cgroup: rstat: Cleanup flushing
functions and locking") which breaks this rule, but is missing the fix
commit 7d6c63c319 ("cgroup: rstat: call cgroup_rstat_updated_list
with cgroup_rstat_lock") that fixes it.
This patch has no functional change.
[1] https://lore.kernel.org/lkml/BY5PR04MB68495E9E8A46CA9614D62669BCBB2@BY5PR04MB6849.namprd04.prod.outlook.com/
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since initcall_debug is a bool variable, it is not necessary to convert
it to bool with the help of a double logical negation (!!).
Remove the redundant operation.
Signed-off-by: Zihuan Zhang <zhangzihuan@kylinos.cn>
Link: https://patch.msgid.link/20250424060339.73119-1-zhangzihuan@kylinos.cn
[ rjw: Changelog rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some kfuncs specific to the idle CPU selection policy are registered in
both the scx_kfunc_ids_any and scx_kfunc_ids_idle blocks, even though
they should only be defined in the latter.
Remove the duplicates from scx_kfunc_ids_any.
Fixes: 337d1b354a ("sched_ext: Move built-in idle CPU selection policy to a separate file")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
- avoid unused variable warnings (Arnd Bergmann, Marek Szyprowski)
- add runtume warnings and debug messages for devices with limited DMA
capabilities (Balbir Singh, Chen-Yu Tsai)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCaAtFeAAKCRCJp1EFxbsS
RGJwAQDIwyLQdk4XbWUZYokxIl/5jIiuaTqQBoPGPILnwoTkuAD8DlxKQvsnzkdT
QK7TSFpKwrboSaveGWEG5oB60wIsKgU=
=TSJY
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.15-2025-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-maping fixes from Marek Szyprowski:
- avoid unused variable warnings (Arnd Bergmann, Marek Szyprowski)
- add runtume warnings and debug messages for devices with limited DMA
capabilities (Balbir Singh, Chen-Yu Tsai)
* tag 'dma-mapping-6.15-2025-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-coherent: Warn if OF reserved memory is beyond current coherent DMA mask
dma-mapping: Fix warning reported for missing prototype
dma-mapping: avoid potential unused data compilation warning
dma/mapping.c: dev_dbg support for dma_addressing_limited
dma/contiguous: avoid warning about unused size_bytes
Add namespace to BPF internal symbols used by light skeleton
to prevent abuse and document with the code their allowed usage.
Fixes: b1d18a7574 ("bpf: Extend sys_bpf commands for bpf_syscall programs.")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20250425014542.62385-1-alexei.starovoitov@gmail.com
The _safe variant used here gets the next element before running the callback,
avoiding the endless loop condition.
Signed-off-by: Brandon Kammerdiener <brandon.kammerdiener@intel.com>
Link: https://lore.kernel.org/r/20250424153246.141677-2-brandon.kammerdiener@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
According to the throttling mechanism, the pmu interrupts number can not
exceed the max_samples_per_tick in one tick. But this mechanism is
ineffective when max_samples_per_tick=1, because the throttling check is
skipped during the first interrupt and only performed when the second
interrupt arrives.
Perhaps this bug may cause little influence in one tick, but if in a
larger time scale, the problem can not be underestimated.
When max_samples_per_tick = 1:
Allowed-interrupts-per-second max-samples-per-second default-HZ ARCH
200 100 100 X86
500 250 250 ARM64
...
Obviously, the pmu interrupt number far exceed the user's expect.
Fixes: e050e3f0a7 ("perf: Fix broken interrupt rate throttling")
Signed-off-by: Qing Wang <wangqing7171@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250405141635.243786-3-wangqing7171@gmail.com
Go to the appropriate section labels when css_rstat_init() or
psi_cgroup_alloc() fails.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Fixes: a97915559f ("cgroup: change rstat function signatures from cgroup-based to css-based")
Signed-off-by: Tejun Heo <tj@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.15-rc4).
This pull includes wireless and a fix to vxlan which isn't
in Linus's tree just yet. The latter creates with a silent conflict
/ build breakage, so merging it now to avoid causing problems.
drivers/net/vxlan/vxlan_vnifilter.c
094adad913 ("vxlan: Use a single lock to protect the FDB table")
087a9eb9e5 ("vxlan: vnifilter: Fix unlocked deletion of default FDB entry")
https://lore.kernel.org/20250423145131.513029-1-idosch@nvidia.com
No "normal" conflicts, or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Single fix for broken usage of 'multi-MIDR' infrastructure in PI
code, adding an open-coded erratum check for Cavium ThunderX
* Bugfixes from a planned posted interrupt rework
* Do not use kvm_rip_read() unconditionally to cater for guests
with inaccessible register state.
Remove two trivial but long unused functions.
__round_jiffies() has been unused since 2008's
commit 9c133c469d ("Add round_jiffies_up and related routines")
__round_jiffies_up() has been unused since 2019's
commit 7ae3f6e130 ("powerpc/watchdog: Use hrtimers for per-CPU
heartbeat")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250418200803.427911-1-linux@treblig.org
The ops.running() and ops.stopping() callbacks can be invoked from a CPU
other than the one the task is assigned to, particularly when a task
property is changed, as both scx_next_task_scx() and dequeue_task_scx() may
run on CPUs different from the task's target CPU.
This behavior can lead to confusion or incorrect assumptions if not
properly clarified, potentially resulting in bugs (see [1]).
Therefore, update the documentation to clarify this aspect and advise
users to use scx_bpf_task_cpu() to determine the actual CPU the task
will run on or was running on.
[1] https://github.com/sched-ext/scx/pull/1728
Cc: Jake Hillion <jake@hillion.co.uk>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Adding support to access arguments with const void pointer arguments
in tracing programs.
Currently we allow tracing programs to access void pointers. If we try to
access argument which is pointer to const void like 2nd argument in kfree,
verifier will fail to load the program with;
0: R1=ctx() R10=fp0
; asm volatile ("r2 = *(u64 *)(r1 + 8); ");
0: (79) r2 = *(u64 *)(r1 +8)
func 'kfree' arg1 type UNKNOWN is not a struct
Changing the is_int_ptr to void and generic integer check and renaming
it to is_void_or_int_ptr.
Signed-off-by: KaFai Wan <mannkafai@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20250423121329.3163461-2-mannkafai@gmail.com
Many conditional checks in switch-case are redundant
with bpf_base_func_proto and should be removed.
Regarding the permission checks bpf_base_func_proto:
The permission checks in bpf_prog_load (as outlined below)
ensure that the trace has both CAP_BPF and CAP_PERFMON capabilities,
thus enabling the use of corresponding prototypes
in bpf_base_func_proto without adverse effects.
bpf_prog_load
......
bpf_cap = bpf_token_capable(token, CAP_BPF);
......
if (type != BPF_PROG_TYPE_SOCKET_FILTER &&
type != BPF_PROG_TYPE_CGROUP_SKB &&
!bpf_cap)
goto put_token;
......
if (is_perfmon_prog_type(type) && !bpf_token_capable(token, CAP_PERFMON))
goto put_token;
......
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20250423073151.297103-1-yangfeng59949@163.com
The calculation of the index used to access the mask field in 'struct
bpf_raw_tp_null_args' is done with 'int' type, which could overflow when
the tracepoint being attached has more than 8 arguments.
While none of the tracepoints mentioned in raw_tp_null_args[] currently
have more than 8 arguments, there do exist tracepoints that had more
than 8 arguments (e.g. iocost_iocg_forgive_debt), so use the correct
type for calculation and avoid Smatch static checker warning.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20250418074946.35569-1-shung-hsi.yu@suse.com
Closes: https://lore.kernel.org/r/843a3b94-d53d-42db-93d4-be10a4090146@stanley.mountain/
Fixed a race condition in incrementing wq->stats[PWQ_STAT_COMPLETED] by
moving the operation under pool->lock.
Reported-by: syzbot+01affb1491750534256d@syzkaller.appspotmail.com
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
A small number of fixes.
virtgpu is exempt from reset shutdown fow now -
a more complete fix is in the works
spec compliance fixes in:
virtio-pci cap commands
vhost_scsi_send_bad_target
virtio console resize
missing locking fix in vhost-scsi
virtio ring - a KCSAN false positive fix
VHOST_*_OWNER documentation fix
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmgIi3cPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpGU8H/1Fq8pH+irGvyH4E21O03qx0wiM+lcYVhNH5
2a3rjOwuJBiLvscZTJG/w07hIpx0O4WrbygdT0BTll4Uen2C+OpGn/Y1LfhW6wsr
3yyeBpTr5hKiY8sOD08rMTHTCM4mD8UdYr13RcNq+eUxNZ6bA+kiGaXpIk0AiRPR
5pdbx16cTZM7k+/9aXp68hRO7yHnyilGzAJG1hHmfx1L5Mt++RVKsf2KI+3YHWcI
0ZZj/NP3iZfNm57+QpKX6zYikH4IFIer1r9wotMaR74brpuq8w7HKZUqe3VfG11Y
TBgq6NfDZVq8G8bCGPv+C+DfDnpYMFVYqytCLn4/AyOhLNCRDs8=
=m8wk
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"A small number of fixes:
- virtgpu is exempt from reset shutdown fow now - a more complete fix
is in the works
- spec compliance fixes in:
- virtio-pci cap commands
- vhost_scsi_send_bad_target
- virtio console resize
- missing locking fix in vhost-scsi
- virtio ring - a KCSAN false positive fix
- VHOST_*_OWNER documentation fix"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-scsi: Fix vhost_scsi_send_status()
vhost-scsi: Fix vhost_scsi_send_bad_target()
vhost-scsi: protect vq->log_used with vq->mutex
vhost_task: fix vhost_task_create() documentation
virtio_console: fix order of fields cols and rows
virtio_console: fix missing byte order handling for cols and rows
virtgpu: don't reset on shutdown
virtio_ring: Fix data race by tagging event_triggered as racy for KCSAN
vhost: fix VHOST_*_OWNER documentation
virtio_pci: Use self group type for cap commands
Commit:
f4b07fd62d ("perf/core: Use POLLHUP for pinned events in error")
started to emit POLLHUP for pinned events in an error state.
But the POLLHUP is also used to signal events that the attached task is
terminated. To distinguish pinned per-task events in the error state
it would need to check if the task is live.
Change it to POLLERR to make it clear.
Suggested-by: Gabriel Marin <gmx@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250422223318.180343-1-namhyung@kernel.org
a11d6784d7 ("sched_ext: Fix missing rq lock in scx_bpf_cpuperf_set()")
added a call to scx_ops_error() which was renamed to scx_error() in
for-6.16. Fix it up.
scx_bpf_cpuperf_set() can be used to set a performance target level on
any CPU. However, it doesn't correctly acquire the corresponding rq
lock, which may lead to unsafe behavior and trigger the following
warning, due to the lockdep_assert_rq_held() check:
[ 51.713737] WARNING: CPU: 3 PID: 3899 at kernel/sched/sched.h:1512 scx_bpf_cpuperf_set+0x1a0/0x1e0
...
[ 51.713836] Call trace:
[ 51.713837] scx_bpf_cpuperf_set+0x1a0/0x1e0 (P)
[ 51.713839] bpf_prog_62d35beb9301601f_bpfland_init+0x168/0x440
[ 51.713841] bpf__sched_ext_ops_init+0x54/0x8c
[ 51.713843] scx_ops_enable.constprop.0+0x2c0/0x10f0
[ 51.713845] bpf_scx_reg+0x18/0x30
[ 51.713847] bpf_struct_ops_link_create+0x154/0x1b0
[ 51.713849] __sys_bpf+0x1934/0x22a0
Fix by properly acquiring the rq lock when possible or raising an error
if we try to operate on a CPU that is not the one currently locked.
Fixes: d86adb4fc0 ("sched_ext: Add cpuperf support")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Some kfuncs provided by sched_ext may need to operate on a struct rq,
but they can be invoked from various contexts, specifically, different
scx callbacks.
While some of these callbacks are invoked with a particular rq already
locked, others are not. This makes it impossible for a kfunc to reliably
determine whether it's safe to access a given rq, triggering potential
bugs or unsafe behaviors, see for example [1].
To address this, track the currently locked rq whenever a sched_ext
callback is invoked via SCX_CALL_OP*().
This allows kfuncs that need to operate on an arbitrary rq to retrieve
the currently locked one and apply the appropriate action as needed.
[1] https://lore.kernel.org/lkml/20250325140021.73570-1-arighi@nvidia.com/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When a reserved memory region described in the device tree is attached
to a device, it is expected that the device's limitations are correctly
included in that description.
However, if the device driver failed to implement DMA address masking
or addressing beyond the default 32 bits (on arm64), then bad things
could happen because the DMA address was truncated, such as playing
back audio with no actual audio coming out, or DMA overwriting random
blocks of kernel memory.
Check against the coherent DMA mask when the memory regions are attached
to the device. Give a warning when the memory region can not be covered
by the mask.
A warning instead of a hard error was chosen, because it is possible
that existing drivers could be working fine even if they forgot to
extend the coherent DMA mask.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250421083930.374173-1-wenst@chromium.org
lkp reported a warning about missing prototype for a recent patch.
The kernel-doc style comments are out of sync, move them to the right
function.
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Christoph Hellwig <hch@lst.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504190615.g9fANxHw-lkp@intel.com/
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
[mszyprow: reformatted subject]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250422114034.3535515-1-balbirs@nvidia.com
Other messages are occasionally printed between these two, for example:
[203104.106534] Restarting tasks ...
[203104.106559] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[203104.112354] done.
This seems to be a timing issue, seen in two of the eleven
hibernation exits in my current `dmesg` output.
When printed on its own, the "done" message has the default log level.
This makes the output of `dmesg --level=warn` quite misleading.
Add enough context for the "done" messages to make sense on their own,
and use the same log level for all messages.
Change the messages to "<event>..." / "Done <event>.", unlike a449dfbfc0
which uses "<event>..." / "<event> completed.". Front-loading the unique
part of the message makes it easier to scan the log, and reduces ambiguity
for users who aren't confident in their English comprehension.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Andrew Sayers <kernel.org@pileofstuff.org>
Link: https://patch.msgid.link/20250411152632.2806038-1-kernel.org@pileofstuff.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Use kvzalloc() so that large exit_dump buffer allocations don't fail
easily.
- Remove cpu.weight / cpu.idle unimplemented warnings which are more
annoying than helpful. This makes SCX_OPS_HAS_CGROUP_WEIGHT unnecessary.
Mark it for deprecation.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaAaeKw4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGcDjAQDM14FReObIKOOuqzlNaYXQqcSW2///ZVf/FR8j
HpWtyAD/Tsqg6CzBpTxKkpMRLsE2iKI1t770vkUnDbjcnR0Rxgc=
=rIV5
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-6.15-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Use kvzalloc() so that large exit_dump buffer allocations don't fail
easily
- Remove cpu.weight / cpu.idle unimplemented warnings which are more
annoying than helpful.
This makes SCX_OPS_HAS_CGROUP_WEIGHT unnecessary. Mark it for
deprecation
* tag 'sched_ext-for-6.15-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Mark SCX_OPS_HAS_CGROUP_WEIGHT for deprecation
sched_ext: Remove cpu.weight / cpu.idle unimplemented warnings
sched_ext: Use kvzalloc for large exit_dump allocation
- Fix compilation in CONFIG_LOCKDEP && !CONFIG_PROVE_RCU configurations.
- Allow "cpuset_v2_mode" mount option for "cpuset" filesystem type to make
life easier for android.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaAac+Q4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGUiAAQCbw6eOFAE+sjI6GgAeMVORbLqyufGDNPvBwgzJ
xPxgcwD/ZLlsJWRG6BzQ/KHeFZnGWSJEiqSSFHGCCr0l4QkIdgA=
=ay1E
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.15-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix compilation in CONFIG_LOCKDEP && !CONFIG_PROVE_RCU configurations
- Allow "cpuset_v2_mode" mount option for "cpuset" filesystem type to
make life easier for android
* tag 'cgroup-for-6.15-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset-v1: Add missing support for cpuset_v2_mode
cgroup: Fix compilation issue due to cgroup_mutex not being exported
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCaAFFvgAKCRAraS+Z+3y5
E/1OAP9SGmTMgHuHLlF8en+MaYdtwgcHy6uurXgbSQAAV/RwwQEAh2oXZE1D9I7a
EtxsaJYqbbhD09RPwWa2Rd8iJrJYXQk=
=qcoU
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-04-17
We've added 12 non-merge commits during the last 9 day(s) which contain
a total of 18 files changed, 1748 insertions(+), 19 deletions(-).
The main changes are:
1) bpf qdisc support, from Amery Hung.
A qdisc can be implemented in bpf struct_ops programs and
can be used the same as other existing qdiscs in the
"tc qdisc" command.
2) Add xsk tail adjustment tests, from Tushar Vyavahare.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Test attaching bpf qdisc to mq and non root
selftests/bpf: Add a bpf fq qdisc to selftest
selftests/bpf: Add a basic fifo qdisc test
libbpf: Support creating and destroying qdisc
bpf: net_sched: Disable attaching bpf qdisc to non root
bpf: net_sched: Support updating bstats
bpf: net_sched: Add a qdisc watchdog timer
bpf: net_sched: Add basic bpf qdisc kfuncs
bpf: net_sched: Support implementation of Qdisc_ops in bpf
bpf: Prepare to reuse get_ctx_arg_idx
selftests/xsk: Add tail adjustment tests and support check
selftests/xsk: Add packet stream replacement function
====================
Link: https://patch.msgid.link/20250417184338.3152168-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In css_rstat_init() allocations are done for the cgroup's pointers
rstat_cpu and rstat_base_cpu. Make sure the allocation checks are
consistent with what they are allocating.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaAQM5QAKCRCRxhvAZXjc
olcwAP0RETZn15Jkt5+mKjcx99fuVE7je3lp56UH4Y4XjZmthgEA1n65RDr4Tq6E
548A2/9Hnt4NWdvoi9VhrG4+5dNRowM=
=cFFa
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.15-rc3.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Revert the hfs{plus} deprecation warning that's also included in this
pull request. The commit introducing the deprecation warning resides
rather early in this branch. So simply dropping it would've rebased
all other commits which I decided to avoid. Hence the revert in the
same branch
[ Background - the deprecation warning discussion resulted in people
stepping up, and so hfs{plus} will have a maintainer taking care of
it after all.. - Linus ]
- Switch CONFIG_SYSFS_SYCALL default to n and decouple from
CONFIG_EXPERT
- Fix an audit bug caused by changes to our kernel path lookup helpers
this cycle. Audit needs the parent path even if the dentry it tried
to look up is negative
- Ensure that the kernel path lookup helpers leave the passed in path
argument clean when they return an error. This is consistent with all
our other helpers
- Ensure that vfs_getattr_nosec() calls bdev_statx() so the relevant
information is available to kernel consumers as well
- Don't set a timer and call schedule() if the timer will expire
immediately in epoll
- Make netfs lookup tables with __nonstring
* tag 'vfs-6.15-rc3.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
Revert "hfs{plus}: add deprecation warning"
fs: move the bdex_statx call to vfs_getattr_nosec
netfs: Mark __nonstring lookup tables
eventpoll: Set epoll timeout if it's in the future
fs: ensure that *path_locked*() helpers leave passed path pristine
fs: add kern_path_locked_negative()
hfs{plus}: add deprecation warning
Kconfig: switch CONFIG_SYSFS_SYCALL default to n
- Initialize hash variables in ftrace subops logic
The fix that simplified the ftrace subops logic opened a path where some
variables could be used without being initialized, and done subtly where
the compiler did not catch it. Initialize those variables to the
EMPTY_HASH, which is the default hash.
- Reinitialize the hash pointers after they are freed
Some of the hash pointers in the subop logic were freed but may still be
referenced later. To prevent use-after-free bugs, initialize them back to
the EMPTY_HASH.
- Free the ftrace hashes when they are replaced
The fix that simplified the subops logic updated some hash pointers, but
left the original hash that they were pointing to where they are no longer
used. This caused a memory leak. Free the hashes that are pointed to by
the pointers when they are replaced.
- Fix size initialization of ftrace direct function hash
The ftrace direct function hash used by BPF initialized the hash size
incorrectly. It checked the size of items to a hard coded 32, which made
the hash bit size of 5. The hash size is supposed to be limited by the bit
size of the hash, as the bitmask is allowed to be greater than 5. Rework
the size check to first pass the number of elements to fls() and then
compare that to FTRACE_HASH_MAX_BITS before allocating the hash.
- Fix format output of ftrace_graph_ent_entry event
The field depth of the ftrace_graph_ent_entry event is of size 4 but the
output showed it as unsigned long and use "%lu". Change it to unsigned int
and use "%u" in the print format that is displayed to user space.
- Fix the trace event filter on strings
Events can be filtered on numbers or string values. The return value
checked from strncpy_from_kernel_nofault() and strncpy_from_user_nofault()
was used to determine if reading the strings would fault or not. It would
return fault if the value was non zero, which is basically meant that it
was always considering the read as a fault.
- Add selftest to test trace event string filtering
In order to catch the breakage of the string filtering, add a self test to
make sure that it continues to work.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaAPqNRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qv5nAP4mqIgne7tzMhHIH/nQGM/7Dj98n+Vt
BXm6VifVdVJvtAD+KCDipZ2MspGEeZX3SDSnvBuj0S+OX9T9CTWPv+rFUwE=
=AWY4
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Initialize hash variables in ftrace subops logic
The fix that simplified the ftrace subops logic opened a path where
some variables could be used without being initialized, and done
subtly where the compiler did not catch it. Initialize those
variables to the EMPTY_HASH, which is the default hash.
- Reinitialize the hash pointers after they are freed
Some of the hash pointers in the subop logic were freed but may still
be referenced later. To prevent use-after-free bugs, initialize them
back to the EMPTY_HASH.
- Free the ftrace hashes when they are replaced
The fix that simplified the subops logic updated some hash pointers,
but left the original hash that they were pointing to where they are
no longer used. This caused a memory leak. Free the hashes that are
pointed to by the pointers when they are replaced.
- Fix size initialization of ftrace direct function hash
The ftrace direct function hash used by BPF initialized the hash size
incorrectly. It checked the size of items to a hard coded 32, which
made the hash bit size of 5. The hash size is supposed to be limited
by the bit size of the hash, as the bitmask is allowed to be greater
than 5. Rework the size check to first pass the number of elements to
fls() and then compare that to FTRACE_HASH_MAX_BITS before allocating
the hash.
- Fix format output of ftrace_graph_ent_entry event
The field depth of the ftrace_graph_ent_entry event is of size 4 but
the output showed it as unsigned long and use "%lu". Change it to
unsigned int and use "%u" in the print format that is displayed to
user space.
- Fix the trace event filter on strings
Events can be filtered on numbers or string values. The return value
checked from strncpy_from_kernel_nofault() and
strncpy_from_user_nofault() was used to determine if reading the
strings would fault or not. It would return fault if the value was
non zero, which is basically meant that it was always considering the
read as a fault.
- Add selftest to test trace event string filtering
In order to catch the breakage of the string filtering, add a self
test to make sure that it continues to work.
* tag 'trace-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: selftests: Add testing a user string to filters
tracing: Fix filter string testing
ftrace: Fix type of ftrace_graph_ent_entry.depth
ftrace: fix incorrect hash size in register_ftrace_direct()
ftrace: Free ftrace hashes after they are replaced in the subops code
ftrace: Reinitialize hash to EMPTY_HASH after freeing
ftrace: Initialize variables for ftrace_startup/shutdown_subops()
Add helper for refilling task with default slice and event
statistics accordingly.
Signed-off-by: Honglei Wang <jameshongleiwang@126.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
SCX_EV_ENQ_SLICE_DFL gives the impression that the event only occurs
when the tasks were enqueued, which seems not accurate. What it actually
means is the refilling with defalt slice, and this can occur either when
enqueue or pick_task. Let's change the variable to
SCX_EV_REFILL_SLICE_DFL.
Signed-off-by: Honglei Wang <jameshongleiwang@126.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Commit cb380909ae ("vhost: return task creation error instead of NULL")
changed the return value of vhost_task_create(), but did not update the
documentation.
Reflect the change in the documentation: on an error, vhost_task_create()
returns an ERR_PTR() and no longer NULL.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20250327124435.142831-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The filter string testing uses strncpy_from_kernel/user_nofault() to
retrieve the string to test the filter against. The if() statement was
incorrect as it considered 0 as a fault, when it is only negative that it
faulted.
Running the following commands:
# cd /sys/kernel/tracing
# echo "filename.ustring ~ \"/proc*\"" > events/syscalls/sys_enter_openat/filter
# echo 1 > events/syscalls/sys_enter_openat/enable
# ls /proc/$$/maps
# cat trace
Would produce nothing, but with the fix it will produce something like:
ls-1192 [007] ..... 8169.828333: sys_openat(dfd: ffffffffffffff9c, filename: 7efc18359904, flags: 80000, mode: 0)
Link: https://lore.kernel.org/all/CAEf4BzbVPQ=BjWztmEwBPRKHUwNfKBkS3kce-Rzka6zvbQeVpg@mail.gmail.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250417183003.505835fb@gandalf.local.home
Fixes: 77360f9bbc ("tracing: Add test for user space strings when filtering on string pointers")
Reported-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Reported-by: Mykyta Yatsenko <mykyta.yatsenko5@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
ftrace_graph_ent.depth is int, but ftrace_graph_ent_entry.depth is
unsigned long. This confuses trace-cmd on 64-bit big-endian systems and
makes it print a huge amount of spaces. Fix this by using unsigned int,
which has a matching size, instead.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250412221847.17310-2-iii@linux.ibm.com
Fixes: ff5c9c576e ("ftrace: Add support for function argument to graph tracer")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The maximum of the ftrace hash bits is made fls(32) in
register_ftrace_direct(), which seems illogical. So, we fix it by making
the max hash bits FTRACE_HASH_MAX_BITS instead.
Link: https://lore.kernel.org/20250413014444.36724-1-dongml2@chinatelecom.cn
Fixes: d05cb47066 ("ftrace: Fix modification of direct_function hash while in use")
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The subops processing creates new hashes when adding and removing subops.
There were some places that the old hashes that were replaced were not
freed and this caused some memory leaks.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250417135939.245b128d@gandalf.local.home
Fixes: 0ae6b8ce20 ("ftrace: Fix accounting of subop hashes")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There's several locations that free a ftrace hash pointer but may be
referenced again. Reset them to EMPTY_HASH so that a u-a-f bug doesn't
happen.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250417110933.20ab718b@gandalf.local.home
Fixes: 0ae6b8ce20 ("ftrace: Fix accounting of subop hashes")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The reworking to fix and simplify the ftrace_startup_subops() and the
ftrace_shutdown_subops() made it possible for the filter_hash and
notrace_hash variables to be used uninitialized in a way that the compiler
did not catch it.
Initialize both filter_hash and notrace_hash to the EMPTY_HASH as that is
what they should be if they never are used.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250417104017.3aea66c2@gandalf.local.home
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Fixes: 0ae6b8ce20 ("ftrace: Fix accounting of subop hashes")
Closes: https://lore.kernel.org/all/1db64a42-626d-4b3a-be08-c65e47333ce2@linux.ibm.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Rename get_ctx_arg_idx to bpf_ctx_arg_idx, and allow others to call it.
No functional change.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250409214606.2000194-2-ameryhung@gmail.com
Android has mounted the v1 cpuset controller using filesystem type
"cpuset" (not "cgroup") since 2015 [1], and depends on the resulting
behavior where the controller name is not added as a prefix for cgroupfs
files. [2]
Later, a problem was discovered where cpu hotplug onlining did not
affect the cpuset/cpus files, which Android carried an out-of-tree patch
to address for a while. An attempt was made to upstream this patch, but
the recommendation was to use the "cpuset_v2_mode" mount option
instead. [3]
An effort was made to do so, but this fails with "cgroup: Unknown
parameter 'cpuset_v2_mode'" because commit e1cba4b85d ("cgroup: Add
mount flag to enable cpuset to use v2 behavior in v1 cgroup") did not
update the special cased cpuset_mount(), and only the cgroup (v1)
filesystem type was updated.
Add parameter parsing to the cpuset filesystem type so that
cpuset_v2_mode works like the cgroup filesystem type:
$ mkdir /dev/cpuset
$ mount -t cpuset -ocpuset_v2_mode none /dev/cpuset
$ mount|grep cpuset
none on /dev/cpuset type cgroup (rw,relatime,cpuset,noprefix,cpuset_v2_mode,release_agent=/sbin/cpuset_release_agent)
[1] b769c8d24f
[2] https://cs.android.com/android/platform/superproject/main/+/main:system/core/libprocessgroup/setup/cgroup_map_write.cpp;drc=2dac5d89a0f024a2d0cc46a80ba4ee13472f1681;l=192
[3] https://lore.kernel.org/lkml/f795f8be-a184-408a-0b5a-553d26061385@redhat.com/T/
Fixes: e1cba4b85d ("cgroup: Add mount flag to enable cpuset to use v2 behavior in v1 cgroup")
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Waiman Long <longman@redhat.com>
Reviewed-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When adding folio_memcg function call in the zram module for
Android16-6.12, the following error occurs during compilation:
ERROR: modpost: "cgroup_mutex" [../soc-repo/zram.ko] undefined!
This error is caused by the indirect call to lockdep_is_held(&cgroup_mutex)
within folio_memcg. The export setting for cgroup_mutex is controlled by
the CONFIG_PROVE_RCU macro. If CONFIG_LOCKDEP is enabled while
CONFIG_PROVE_RCU is not, this compilation error will occur.
To resolve this issue, add a parallel macro CONFIG_LOCKDEP control to
ensure cgroup_mutex is properly exported when needed.
Signed-off-by: gao xu <gaoxu2@honor.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Notice that ignore_dl_rate_limit() need not piggy back on the
limits_changed handling to achieve its goal (which is to enforce a
frequency update before its due time).
Namely, if sugov_should_update_freq() is updated to check
sg_policy->need_freq_update and return 'true' if it is set when
sg_policy->limits_changed is not set, ignore_dl_rate_limit() may
set the former directly instead of setting the latter, so it can
avoid hitting the memory barrier in sugov_should_update_freq().
Update the code accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/10666429.nUPlyArG6x@rjwysocki.net
The handling of the limits_changed flag in struct sugov_policy needs to
be explicitly synchronized to ensure that cpufreq policy limits updates
will not be missed in some cases.
Without that synchronization it is theoretically possible that
the limits_changed update in sugov_should_update_freq() will be
reordered with respect to the reads of the policy limits in
cpufreq_driver_resolve_freq() and in that case, if the limits_changed
update in sugov_limits() clobbers the one in sugov_should_update_freq(),
the new policy limits may not take effect for a long time.
Likewise, the limits_changed update in sugov_limits() may theoretically
get reordered with respect to the updates of the policy limits in
cpufreq_set_policy() and if sugov_should_update_freq() runs between
them, the policy limits change may be missed.
To ensure that the above situations will not take place, add memory
barriers preventing the reordering in question from taking place and
add READ_ONCE() and WRITE_ONCE() annotations around all of the
limits_changed flag updates to prevent the compiler from messing up
with that code.
Fixes: 600f5badb7 ("cpufreq: schedutil: Don't skip freq update when limits change")
Cc: 5.3+ <stable@vger.kernel.org> # 5.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/3376719.44csPzL39Z@rjwysocki.net
Commit 8e461a1cb4 ("cpufreq: schedutil: Fix superfluous updates caused
by need_freq_update") modified sugov_should_update_freq() to set the
need_freq_update flag only for drivers with CPUFREQ_NEED_UPDATE_LIMITS
set, but that flag generally needs to be set when the policy limits
change because the driver callback may need to be invoked for the new
limits to take effect.
However, if the return value of cpufreq_driver_resolve_freq() after
applying the new limits is still equal to the previously selected
frequency, the driver callback needs to be invoked only in the case
when CPUFREQ_NEED_UPDATE_LIMITS is set (which means that the driver
specifically wants its callback to be invoked every time the policy
limits change).
Update the code accordingly to avoid missing policy limits changes for
drivers without CPUFREQ_NEED_UPDATE_LIMITS.
Fixes: 8e461a1cb4 ("cpufreq: schedutil: Fix superfluous updates caused by need_freq_update")
Closes: https://lore.kernel.org/lkml/Z_Tlc6Qs-tYpxWYb@linaro.org/
Reported-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/3010358.e9J7NaK4W3@rjwysocki.net
Due to an oversight in merging:
da916e96e2 ("perf: Make perf_pmu_unregister() useable")
on top of:
a3c3c66670 ("perf/core: Fix child_total_time_enabled accounting bug at task exit")
the timekeeping fix from this latter patch got undone.
Redo it.
Fixes: da916e96e2 ("perf: Make perf_pmu_unregister() useable")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20250417080815.GI38216@noisy.programming.kicks-ass.net
Due to an oversight in merging:
da916e96e2 ("perf: Make perf_pmu_unregister() useable")
on top of:
56799bc035 ("perf: Fix hang while freeing sigtrap event")
.. it is now possible to hit put_event(EVENT_TOMBSTONE), which makes
the computer sad.
This also means that for the event->parent == EVENT_TOMBSTONE, the
put_event() matching inherit_event() has gone missing.
Previously this was done in perf_event_release_kernel() after calling
perf_remove_from_context(), but with it delegated to put_event(), this
case is now entirely missed, leading to leaks.
Fixes: da916e96e2 ("perf: Make perf_pmu_unregister() useable")
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: kernel test robot <oliver.sang@intel.com>
Tested-by: James Clark <james.clark@linaro.org>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Closes: https://lore.kernel.org/oe-lkp/202504131701.941039cd-lkp@intel.com
Link: https://lkml.kernel.org/r/20250415131446.GN5600@noisy.programming.kicks-ass.net
So there are three situations:
* If perf_event_free_task() has removed all the children from the parent list
before perf_event_release_kernel() got a chance to even iterate them, then
it's all good as there is no get_ctx() pending.
* If perf_event_release_kernel() iterates a child event, but it gets freed
meanwhile by perf_event_free_task() while the mutexes are temporarily
unlocked, it's all good because while locking again the ctx mutex,
perf_event_release_kernel() observes TASK_TOMBSTONE.
* But if perf_event_release_kernel() frees the child event before
perf_event_free_task() got a chance, we may face this scenario:
perf_event_release_kernel() perf_event_free_task()
-------------------------- ------------------------
mutex_lock(&event->child_mutex)
get_ctx(child->ctx)
mutex_unlock(&event->child_mutex)
mutex_lock(ctx->mutex)
mutex_lock(&event->child_mutex)
perf_remove_from_context(child)
mutex_unlock(&event->child_mutex)
mutex_unlock(ctx->mutex)
// This lock acquires ctx->refcount == 2
// visibility
mutex_lock(ctx->mutex)
ctx->task = TASK_TOMBSTONE
mutex_unlock(ctx->mutex)
wait_var_event()
// enters prepare_to_wait() since
// ctx->refcount == 2
// is guaranteed to be seen
set_current_state(TASK_INTERRUPTIBLE)
smp_mb()
if (ctx->refcount != 1)
schedule()
put_ctx()
// NOT fully ordered! Only RELEASE semantics
refcount_dec_and_test()
atomic_fetch_sub_release()
// So TASK_TOMBSTONE is not guaranteed to be seen
if (ctx->task == TASK_TOMBSTONE)
wake_up_var()
Basically it's a broken store buffer:
perf_event_release_kernel() perf_event_free_task()
-------------------------- ------------------------
ctx->task = TASK_TOMBSTONE smp_store_release(&ctx->refcount, ctx->refcount - 1)
smp_mb()
READ_ONCE(ctx->refcount) READ_ONCE(ctx->task)
So we need a smp_mb__after_atomic() before looking at ctx->task.
Fixes: 59f3aa4a3e ("perf: Simplify perf_event_free_task() wait")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/Z_ZvmEhjkAhplCBE@localhost.localdomain
In the zeal to adjust all event->state checks to include the new
REVOKED state, one adjustment was made in error. Notably it resulted
in read() on the perf filedesc to stop working for any state lower
than ERROR, specifically EXIT.
This leads to problems with (among others) perf-stat, which wants to
read the counts after a program has finished execution.
Fixes: da916e96e2 ("perf: Make perf_pmu_unregister() useable")
Reported-by: "Mi, Dapeng" <dapeng1.mi@linux.intel.com>
Reported-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/77036114-8723-4af9-a068-1d535f4e2e81@linaro.org
Link: https://lore.kernel.org/r/20250417080725.GH38216@noisy.programming.kicks-ass.net
Mike reports that commit 6d71a9c616 ("sched/fair: Fix EEVDF entity
placement bug causing scheduling lag") relies on commit 4423af84b2
("sched/fair: optimize the PLACE_LAG when se->vlag is zero") to not
trip a WARN in place_entity().
What happens is that the lag of the very last entity is 0 per
definition -- the average of one element matches the value of that
element. Therefore place_entity() will match the condition skipping
the lag adjustment:
if (sched_feat(PLACE_LAG) && cfs_rq->nr_queued && se->vlag) {
Without the 'se->vlag' condition -- it will attempt to adjust the zero
lag even though we're inserting into an empty tree.
Notably, we should have failed the 'cfs_rq->nr_queued' condition, but
don't because they didn't get updated.
Additionally, move update_load_add() after placement() as is
consistent with other place_entity() users -- this change is
non-functional, place_entity() does not use cfs_rq->load.
Fixes: 6d71a9c616 ("sched/fair: Fix EEVDF entity placement bug causing scheduling lag")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/c216eb4ef0e0e0029c600aefc69d56681cee5581.camel@gmx.de
Add a file to read local group's "asym_prefer_cpu" from debugfs. This
information was useful when debugging issues where "asym_prefer_cpu" was
incorrectly set to a CPU with a lower asym priority.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250409053446.23367-5-kprateek.nayak@amd.com
A subset of AMD Processors supporting Preferred Core Rankings also
feature the ability to dynamically switch these rankings at runtime to
bias load balancing towards or away from the LLC domain with larger
cache.
To support dynamically updating "sg->asym_prefer_cpu" without needing to
rebuild the sched domain, introduce sched_update_asym_prefer_cpu() which
recomutes the "asym_prefer_cpu" when the core-ranking of a CPU changes.
sched_update_asym_prefer_cpu() swaps the "sg->asym_prefer_cpu" with the
CPU whose ranking has changed if the new ranking is greater than that of
the "asym_prefer_cpu". If CPU whose ranking has changed is the current
"asym_prefer_cpu", it scans the CPUs of the sched groups to find the new
"asym_prefer_cpu" and sets it accordingly.
get_group() for non-overlapping sched domains returns the sched group
for the first CPU in the sched_group_span() which ensures all CPUs in
the group see the updated value of "asym_prefer_cpu".
Overlapping groups are allocated differently and will require moving the
"asym_prefer_cpu" to "sg->sgc" but since the current implementations do
not set "SD_ASYM_PACKING" at NUMA domains, skip additional
indirection and place a SCHED_WARN_ON() to alert any future users.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250409053446.23367-3-kprateek.nayak@amd.com
Subsequent commits add the support to dynamically update the sched_group
struct's "asym_prefer_cpu" member from a remote CPU. Use READ_ONCE()
when reading the "sg->asym_prefer_cpu" to ensure load balancer always
reads the latest value.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250409053446.23367-2-kprateek.nayak@amd.com
lookup_or_create_module_kobject() is marked as static and __init,
to make it global drop static keyword.
Since this function can be called from non-init code, use __modinit
instead of __init, __modinit marker will make it __init if
CONFIG_MODULES is not defined.
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Shyam Saini <shyamsaini@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250227184930.34163-4-shyamsaini@linux.microsoft.com
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
In the unlikely event of the allocation failing, it is better to let
the machine boot with a not fully populated sysfs than to kill it with
this BUG_ON(). All callers are already prepared for
lookup_or_create_module_kobject() returning NULL.
This is also preparation for calling this function from non __init
code, where using BUG_ON for allocation failure handling is not
acceptable.
Since we are here, also start using IS_ENABLED instead of #ifdef
construct.
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Shyam Saini <shyamsaini@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250227184930.34163-3-shyamsaini@linux.microsoft.com
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
The locate_module_kobject() function looks up an existing
module_kobject for a given module name. If it cannot find the
corresponding module_kobject, it creates one for the given name.
This commit renames locate_module_kobject() to
lookup_or_create_module_kobject() to better describe its operations.
This doesn't change anything functionality wise.
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Shyam Saini <shyamsaini@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250227184930.34163-2-shyamsaini@linux.microsoft.com
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Follow the advice of the Documentation/filesystems/sysfs.rst that show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the value
to be returned to user space.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250416101651.2128688-1-andriy.shevchenko@linux.intel.com
The audit code relies on the fact that kern_path_locked() returned a
path even for a negative dentry. If it doesn't find a valid dentry it
immediately calls:
audit_find_parent(d_backing_inode(parent_path.dentry));
which assumes that parent_path.dentry is still valid. But it isn't since
kern_path_locked() has been changed to path_put() also for a negative
dentry.
Fix this by adding a helper that implements the required audit semantics
and allows us to fix the immediate bleeding. We can find a unified
solution for this afterwards.
Link: https://lore.kernel.org/20250414-rennt-wimmeln-f186c3a780f1@brauner
Fixes: 1c3cb50b58 ("VFS: change kern_path_locked() and user_path_locked_at() to never return negative dentry")
Reported-and-tested-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
After the commit 7903f907a2 ("pid: perform free_pid() calls outside
of tasklist_lock") __unhash_process() -> detach_pid() no longer calls
free_pid(), proc_flush_pid() can just use p->thread_pid without the
now pointless get_pid() + put_pid().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/20250411121857.GA10550@redhat.com
Reviewed-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
destroy_workqueue() does not ensure that non-pending work submitted with
queue_delayed_work() gets cancelled. The caller has to ensure that
manually.
Add this information about delayed_work in destroy_workqueue()'s
docstring.
Add a TODO for destroy_workqueue() to wait for all delayed_work.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
In the debug and resolution of an issue involving forced use of bounce
buffers, 7170130e4c ("x86/mm/init: Handle the special case of device
private pages in add_pages(), to not increase max_pfn and trigger
dma_addressing_limited() bounce buffers"). It would have been easier
to debug the issue if dma_addressing_limited() had debug information
about the device not being able to address all of memory and thus forcing
all accesses through a bounce buffer. Please see[2]
Implement dev_dbg to debug the potential use of bounce buffers
when we hit the condition. When swiotlb is used,
dma_addressing_limited() is used to determine the size of maximum dma
buffer size in dma_direct_max_mapping_size(). The debug prints could be
triggered in that check as well (when enabled).
Link: https://lore.kernel.org/lkml/20250401000752.249348-1-balbirs@nvidia.com/ [1]
Link: https://lore.kernel.org/lkml/20250310112206.4168-1-spasswolf@web.de/ [2]
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250414113752.3298276-1-balbirs@nvidia.com
If the test added in commit b5ffbd1396 ("sysctl: move the extra1/2
boundary check of u8 to sysctl_check_table_array") is run as a module, a
lingering reference to the module is left behind, and a 'sysctl -a'
leads to a panic.
To reproduce
CONFIG_KUNIT=y
CONFIG_SYSCTL_KUNIT_TEST=m
Then run these commands:
modprobe sysctl-test
rmmod sysctl-test
sysctl -a
The panic varies but generally looks something like this:
BUG: unable to handle page fault for address: ffffa4571c0c7db4
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 100000067 P4D 100000067 PUD 100351067 PMD 114f5e067 PTE 0
Oops: Oops: 0000 [#1] SMP NOPTI
... ... ...
RIP: 0010:proc_sys_readdir+0x166/0x2c0
... ... ...
Call Trace:
<TASK>
iterate_dir+0x6e/0x140
__se_sys_getdents+0x6e/0x100
do_syscall_64+0x70/0x150
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Move the test to lib/test_sysctl.c where the registration reference is
handled on module exit
Fixes: b5ffbd1396 ("sysctl: move the extra1/2 boundary check of u8 to sysctl_check_table_array")
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
- Hide get_vm_area() from MMUless builds
The function get_vm_area() is not defined when CONFIG_MMU is not defined.
Hide that function within #ifdef CONFIG_MMU.
- Fix output of synthetic events when they have dynamic strings
The print fmt of the synthetic event's format file use to have "%.*s" for
dynamic size strings even though the user space exported arguments had
only __get_str() macro that provided just a nul terminated string. This
was fixed so that user space could parse this properly. But the reason
that it had "%.*s" was because internally it provided the maximum size of
the string as one of the arguments. The fix that replaced "%.*s" with "%s"
caused the trace output (when the kernel reads the event) to write
"(efault)" as it would now read the length of the string as "%s".
As the string provided is always nul terminated, there's no reason for the
internal code to use "%.*s" anyway. Just remove the length argument to
match the "%s" that is now in the format.
- Fix the ftrace subops hash logic of the manager ops hash
The function_graph uses the ftrace subops code. The subops code is a way
to have a single ftrace_ops registered with ftrace to determine what
functions will call the ftrace_ops callback. More than one user of
function graph can register a ftrace_ops with it. The function graph
infrastructure will then add this ftrace_ops as a subops with the main
ftrace_ops it registers with ftrace. This is because the functions will
always call the function graph callback which in turn calls the subops
ftrace_ops callbacks.
The main ftrace_ops must add a callback to all the functions that the
subops want a callback from. When a subops is registered, it will update
the main ftrace_ops hash to include the functions it wants. This is the
logic that was broken.
The ftrace_ops hash has a "filter_hash" and a "notrace_hash" were all the
functions in the filter_hash but not in the notrace_hash are attached by
ftrace. The original logic would have the main ftrace_ops filter_hash be a
union of all the subops filter_hashes and the main notrace_hash would be a
intersect of all the subops filter hashes. But this was incorrect because
the notrace hash depends on the filter_hash it is associated to and not
the union of all filter_hashes.
Instead, when a subops is added, just include all the functions of the
subops hash that are in its filter_hash but not in its notrace_hash. The
main subops hash should not use its notrace hash, unless all of its subops
hashes have an empty filter_hash (which means to attach to all functions),
and then, and only then, the main ftrace_ops notrace hash can be the
intersect of all the subops hashes.
This not only fixes the bug, but also simplifies the code.
- Add a selftest to better test the subops filtering
Add a selftest that would catch the bug fixed by the above change.
- Fix extra newline printed in function tracing with retval
The function parameter code changed the output logic slightly and called
print_graph_retval() and also printed a newline. The print_graph_retval()
also prints a newline which caused blank lines to be printed in the
function graph tracer when retval was added. This caused one of the
selftests to fail if retvals were enabled. Instead remove the new line
output from print_graph_retval() and have the callers always print the
new line so that it doesn't have to do special logic if it calls
print_graph_retval() or not.
- Fix out-of-bound memory access in the runtime verifier
When rv_is_container_monitor() is called on the last entry on the link
list it references the next entry, which is the list head and causes an
out-of-bound memory access.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ/rXQxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qoj7AQC0C2awpJSUIRj91qjPtMYuNUE3AVpB
EEZEkt19LfE//gEA1fOx3Cors/LrY9dthn/3LMKL23vo9c4i0ffhs2X+1gE=
=XJL5
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Hide get_vm_area() from MMUless builds
The function get_vm_area() is not defined when CONFIG_MMU is not
defined. Hide that function within #ifdef CONFIG_MMU.
- Fix output of synthetic events when they have dynamic strings
The print fmt of the synthetic event's format file use to have "%.*s"
for dynamic size strings even though the user space exported
arguments had only __get_str() macro that provided just a nul
terminated string. This was fixed so that user space could parse this
properly.
But the reason that it had "%.*s" was because internally it provided
the maximum size of the string as one of the arguments. The fix that
replaced "%.*s" with "%s" caused the trace output (when the kernel
reads the event) to write "(efault)" as it would now read the length
of the string as "%s".
As the string provided is always nul terminated, there's no reason
for the internal code to use "%.*s" anyway. Just remove the length
argument to match the "%s" that is now in the format.
- Fix the ftrace subops hash logic of the manager ops hash
The function_graph uses the ftrace subops code. The subops code is a
way to have a single ftrace_ops registered with ftrace to determine
what functions will call the ftrace_ops callback. More than one user
of function graph can register a ftrace_ops with it. The function
graph infrastructure will then add this ftrace_ops as a subops with
the main ftrace_ops it registers with ftrace. This is because the
functions will always call the function graph callback which in turn
calls the subops ftrace_ops callbacks.
The main ftrace_ops must add a callback to all the functions that the
subops want a callback from. When a subops is registered, it will
update the main ftrace_ops hash to include the functions it wants.
This is the logic that was broken.
The ftrace_ops hash has a "filter_hash" and a "notrace_hash" where
all the functions in the filter_hash but not in the notrace_hash are
attached by ftrace. The original logic would have the main ftrace_ops
filter_hash be a union of all the subops filter_hashes and the main
notrace_hash would be a intersect of all the subops filter hashes.
But this was incorrect because the notrace hash depends on the
filter_hash it is associated to and not the union of all
filter_hashes.
Instead, when a subops is added, just include all the functions of
the subops hash that are in its filter_hash but not in its
notrace_hash. The main subops hash should not use its notrace hash,
unless all of its subops hashes have an empty filter_hash (which
means to attach to all functions), and then, and only then, the main
ftrace_ops notrace hash can be the intersect of all the subops
hashes.
This not only fixes the bug, but also simplifies the code.
- Add a selftest to better test the subops filtering
Add a selftest that would catch the bug fixed by the above change.
- Fix extra newline printed in function tracing with retval
The function parameter code changed the output logic slightly and
called print_graph_retval() and also printed a newline. The
print_graph_retval() also prints a newline which caused blank lines
to be printed in the function graph tracer when retval was added.
This caused one of the selftests to fail if retvals were enabled.
Instead remove the new line output from print_graph_retval() and have
the callers always print the new line so that it doesn't have to do
special logic if it calls print_graph_retval() or not.
- Fix out-of-bound memory access in the runtime verifier
When rv_is_container_monitor() is called on the last entry on the
link list it references the next entry, which is the list head and
causes an out-of-bound memory access.
* tag 'trace-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix out-of-bound memory access in rv_is_container_monitor()
ftrace: Do not have print_graph_retval() add a newline
tracing/selftest: Add test to better test subops filtering of function graph
ftrace: Fix accounting of subop hashes
ftrace: Properly merge notrace hashes
tracing: Do not add length to print format in synthetic events
tracing: Hide get_vm_area() from MMUless builds
-----BEGIN PGP SIGNATURE-----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=Mezb
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Followup fixes for resilient spinlock (Kumar Kartikeya Dwivedi):
- Make res_spin_lock test less verbose, since it was spamming BPF
CI on failure, and make the check for AA deadlock stronger
- Fix rebasing mistake and use architecture provided
res_smp_cond_load_acquire
- Convert BPF maps (queue_stack and ringbuf) to resilient spinlock
to address long standing syzbot reports
- Make sure that classic BPF load instruction from SKF_[NET|LL]_OFF
offsets works when skb is fragmeneted (Willem de Bruijn)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Convert ringbuf map to rqspinlock
bpf: Convert queue_stack map to rqspinlock
bpf: Use architecture provided res_smp_cond_load_acquire
selftests/bpf: Make res_spin_lock AA test condition stronger
selftests/net: test sk_filter support for SKF_NET_OFF on frags
bpf: support SKF_NET_OFF and SKF_LL_OFF on skb frags
selftests/bpf: Make res_spin_lock test less verbose
When rv_is_container_monitor() is called on the last monitor in
rv_monitors_list, KASAN yells:
BUG: KASAN: global-out-of-bounds in rv_is_container_monitor+0x101/0x110
Read of size 8 at addr ffffffff97c7c798 by task setup/221
The buggy address belongs to the variable:
rv_monitors_list+0x18/0x40
This is due to list_next_entry() is called on the last entry in the list.
It wraps around to the first list_head, and the first list_head is not
embedded in struct rv_monitor_def.
Fix it by checking if the monitor is last in the list.
Cc: stable@vger.kernel.org
Cc: Gabriele Monaco <gmonaco@redhat.com>
Fixes: cb85c660fc ("rv: Add option for nested monitors and include sched")
Link: https://lore.kernel.org/e85b5eeb7228bfc23b8d7d4ab5411472c54ae91b.1744355018.git.namcao@linutronix.de
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The retval and retaddr options for function_graph tracer will add a
comment at the end of a function for both leaf and non leaf functions that
looks like:
__wake_up_common(); /* ret=0x1 */
} /* pick_next_task_fair ret=0x0 */
The function print_graph_retval() adds a newline after the "*/". But if
that's not called, the caller function needs to make sure there's a
newline added.
This is confusing and when the function parameters code was added, it
added a newline even when calling print_graph_retval() as the fact that
the print_graph_retval() function prints a newline isn't obvious.
This caused an extra newline to be printed and that made it fail the
selftests when the retval option was set, as the selftests were not
expecting blank lines being injected into the trace.
Instead of having print_graph_retval() print a newline, just have the
caller always print the newline regardless if it calls print_graph_retval()
or not. This not only fixes this bug, but it also simplifies the code.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250411133015.015ca393@gandalf.local.home
Reported-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/ccc40f2b-4b9e-4abd-8daf-d22fce2a86f0@sirena.org.uk/
Fixes: ff5c9c576e ("ftrace: Add support for function argument to graph tracer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In a prior patch series we tried to cleanly differentiate between:
(1) The task has already been reaped.
(2) The caller requested a pidfd for a thread-group leader but the pid
actually references a struct pid that isn't used as a thread-group
leader.
as this was causing issues for non-threaded workloads.
But there's cases where the current simple logic is wrong. Specifically,
if the pid was a leader pid and the check races with __unhash_process().
Stabilize this by using the pidfd waitqueue lock.
Link: https://lore.kernel.org/20250411-work-pidfs-enoent-v2-2-60b2d3bb545f@kernel.org
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Move the pidfd notification out of __change_pid() and into
__unhash_process(). The only valid call to __change_pid() with a NULL
argument and PIDTYPE_PID is from __unhash_process(). This is a lot more
obvious than calling it from __change_pid().
Link: https://lore.kernel.org/20250411-work-pidfs-enoent-v2-1-60b2d3bb545f@kernel.org
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The function graph infrastructure uses ftrace to hook to functions. It has
a single ftrace_ops to manage all the users of function graph. Each
individual user (tracing, bpf, fprobes, etc) has its own ftrace_ops to
track the functions it will have its callback called from. These
ftrace_ops are "subops" to the main ftrace_ops of the function graph
infrastructure.
Each ftrace_ops has a filter_hash and a notrace_hash that is defined as:
Only trace functions that are in the filter_hash but not in the
notrace_hash.
If the filter_hash is empty, it means to trace all functions.
If the notrace_hash is empty, it means do not disable any function.
The function graph main ftrace_ops needs to be a superset containing all
the functions to be traced by all the subops it has. The algorithm to
perform this merge was incorrect.
When the first subops was added to the main ops, it simply made the main
ops a copy of the subops (same filter_hash and notrace_hash).
When a second ops was added, it joined the new subops filter_hash with the
main ops filter_hash as a union of the two sets. The intersect between the
new subops notrace_hash and the main ops notrace_hash was created as the
new notrace_hash of the main ops.
The issue here is that it would then start tracing functions than no
subops were tracing. For example if you had two subops that had:
subops 1:
filter_hash = '*sched*' # trace all functions with "sched" in it
notrace_hash = '*time*' # except do not trace functions with "time"
subops 2:
filter_hash = '*lock*' # trace all functions with "lock" in it
notrace_hash = '*clock*' # except do not trace functions with "clock"
The intersect of '*time*' functions with '*clock*' functions could be the
empty set. That means the main ops will be tracing all functions with
'*time*' and all "*clock*" in it!
Instead, modify the algorithm to be a bit simpler and correct.
First, when adding a new subops, even if it's the first one, do not add
the notrace_hash if the filter_hash is not empty. Instead, just add the
functions that are in the filter_hash of the subops but not in the
notrace_hash of the subops into the main ops filter_hash. There's no
reason to add anything to the main ops notrace_hash.
The notrace_hash of the main ops should only be non empty iff all subops
filter_hashes are empty (meaning to trace all functions) and all subops
notrace_hashes include the same functions.
That is, the main ops notrace_hash is empty if any subops filter_hash is
non empty.
The main ops notrace_hash only has content in it if all subops
filter_hashes are empty, and the content are only functions that intersect
all the subops notrace_hashes. If any subops notrace_hash is empty, then
so is the main ops notrace_hash.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Andy Chiu <andybnac@gmail.com>
Link: https://lore.kernel.org/20250409152720.216356767@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The global notrace hash should be jointly decided by the intersection of
each subops's notrace hash, but not the filter hash.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250408160258.48563-1-andybnac@gmail.com
Fixes: 5fccc7552c ("ftrace: Add subops logic to allow one ops to manage many")
Signed-off-by: Andy Chiu <andybnac@gmail.com>
[ fixed removing of freeing of filter_hash ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When no audit rules are in place, AUDIT_ANOM_{LINK,CREAT} events
reported in audit_log_path_denied() are unconditionally dropped due to
an explicit check for the existence of any audit rules. Given this is a
report of a security violation, allow it to be recorded regardless of
the existence of any audit rules.
To test,
mkdir -p /root/tmp
chmod 1777 /root/tmp
touch /root/tmp/test.txt
useradd test
chown test /root/tmp/test.txt
{echo C0644 12 test.txt; printf 'hello\ntest1\n'; printf \\000;} | \
scp -t /root/tmp
Check with
ausearch -m ANOM_CREAT -ts recent
Link: https://issues.redhat.com/browse/RHEL-9065
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
audit_log_vformat() is using printf() type of format, and GCC compiler
(Debian 14.2.0-17) is not happy about this:
kernel/audit.c:1978:9: error: function ‘audit_log_vformat’
might be a candidate for ‘gnu_printf’ format attribute
kernel/audit.c:1987:17: error: function ‘audit_log_vformat’
might be a candidate for ‘gnu_printf’ format attribute
Fix the compilation errors (`make W=1` when CONFIG_WERROR=y, which is
default) by adding __printf() attribute.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[PM: commit description line wrap fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add a tracepoint to monitor TCP send operations, enabling detailed
visibility into TCP message transmission.
Create a new tracepoint within the tcp_sendmsg_locked function,
capturing traditional fields along with size_goal, which indicates the
optimal data size for a single TCP segment. Additionally, a reference to
the struct sock sk is passed, allowing direct access for BPF programs.
The implementation is largely based on David's patch[1] and suggestions.
Link: https://lore.kernel.org/all/70168c8f-bf52-4279-b4c4-be64527aa1ac@kernel.org/ [1]
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250408-tcpsendmsg-v3-2-208b87064c28@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix __free_event() corner case splat
- Fix false-positive uprobes related lockdep
splat on CONFIG_PREEMPT_RT=y kernels
- Fix a complicated perf sigtrap race that may
result in hangs
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=V5bo
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc perf events fixes from Ingo Molnar:
- Fix __free_event() corner case splat
- Fix false-positive uprobes related lockdep splat on
CONFIG_PREEMPT_RT=y kernels
- Fix a complicated perf sigtrap race that may result in hangs
* tag 'perf-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix hang while freeing sigtrap event
uprobes: Avoid false-positive lockdep splat on CONFIG_PREEMPT_RT=y in the ri_timer() uprobe timer callback, use raw_write_seqcount_*()
perf/core: Fix WARN_ON(!ctx) in __free_event() for partial init
The update of element in fd htab is in-place now, therefore, there is no
need to allocate per-cpu extra_elems, just remove it.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20250401062250.543403-6-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
As reported by Cody Haas [1], when there is concurrent map lookup and
map update operation in an existing element for htab of maps, the map
lookup procedure may return -ENOENT unexpectedly.
The root cause is twofold:
1) the update of existing element involves two separated list operation
In htab_map_update_elem(), it first inserts the new element at the head
of list, then it deletes the old element. Therefore, it is possible a
lookup operation has already iterated to the middle of the list when a
concurrent update operation begins, and the lookup operation will fail
to find the target element.
2) the immediate reuse of htab element.
It is more subtle. Even through the lookup operation finds the old
element, it is possible that the target element has been removed by a
concurrent update operation, and the element has been reused immediately
by other update operation which runs on the same CPU as the previous
update operation, and the element is inserted into the same bucket list.
After these steps above, when the lookup operation tries to compare the
key in the old element with the expected key, the match will fail
because the key in the old element have been overwritten by other update
operation.
The two-step update process is relatively straightforward to address.
The more challenging aspect is the immediate reuse. As Alexei pointed
out:
So since 2022 both prealloc and no_prealloc reuse elements.
We can consider a new flag for the hash map like F_REUSE_AFTER_RCU_GP
that will use _rcu() flavor of freeing into bpf_ma,
but it has to have a strong reason.
Given that htab of maps doesn't support special field in value and
directly stores the inner map pointer in htab_element, just do in-place
update for htab of maps instead of attempting to address the immediate
reuse issue.
[1]: https://lore.kernel.org/xdp-newbies/CAH7f-ULFTwKdoH_t2SFc5rWCVYLEg-14d1fBYWH2eekudsnTRg@mail.gmail.com/
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20250401062250.543403-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Rename __htab_percpu_map_update_elem to htab_map_update_elem_in_place,
and add a new percpu argument for the helper to support in-place update
for both per-cpu htab and htab of maps.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20250401062250.543403-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
All hash maps store map key and map value together. The relative offset
of the map value compared to the map key is round_up(key_size, 8).
Therefore, factor out a common helper htab_elem_value() to calculate the
address of the map value instead of duplicating the logic.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20250401062250.543403-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The link_create.flags are currently not used for multi-uprobes, so return
-EINVAL if it is set, same as for other attach APIs.
We allow target_fd to have an arbitrary value for multi-uprobe, though,
as there are existing users (libbpf) relying on this.
Fixes: 89ae89f53d ("bpf: Add multi uprobe link")
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250407035752.1108927-2-chen.dylane@linux.dev
The link_create.flags are currently not used for multi-kprobes, so return
-EINVAL if it is set, same as for other attach APIs.
We allow target_fd, on the other hand, to have an arbitrary value for
multi-kprobe, as there are existing users (libbpf) relying on this.
Fixes: 0dcac27254 ("bpf: Add multi kprobe link")
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250407035752.1108927-1-chen.dylane@linux.dev
Move posix_timers_cache initialization to posixtimer_init(). At that point
the memory subsystem is already up and running.
Also move the cache pointer to the __timer_data variable to avoid
potential false sharing, since it never was marked as __ro_after_init.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250402133114.253901-1-edumazet@google.com
scx_has_op is used to encode which ops are implemented by the BPF scheduler
into an array of static_keys. While this saves a bit of branching overhead,
that is unlikely to be noticeable compared to the overall cost. As the
global static_keys can't work with the planned hierarchical multiple
scheduler support, replace the static_key array with a bitmap.
In repeated hackbench runs before and after static_keys removal on an AMD
Ryzen 3900X, I couldn't tell any measurable performance difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
scx_ops_allow_queued_wakeup is used to encode SCX_OPS_ALLOW_QUEUED_WAKEUP
into a static_key. The test is gated behind scx_enabled(), and, even when
sched_ext is enabled, is unlikely for the static_key usage to make any
meaningful difference. It is made to use a static_key mostly because there
was no reason not to. However, global static_keys can't work with the
planned hierarchical multiple scheduler support. Remove the static_key and
instead test SCX_OPS_ALLOW_QUEUED_WAKEUP directly.
In repeated hackbench runs before and after static_keys removal on an AMD
Ryzen 3900X, I couldn't tell any measurable performance difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
scx_ops_cpu_preempt is used to encode whether ops.cpu_acquire/release() are
implemented into a static_key. These tests aren't hot enough for static_key
usage to make any meaningful difference and are made to use a static_key
mostly because there was no reason not to. However, global static_keys can't
work with the planned hierarchical multiple scheduler support. Remove the
static_key and instead use an internal ops flag SCX_OPS_HAS_CPU_PREEMPT to
record and test whether ops.cpu_acquire/release() are implemented.
In repeated hackbench runs before and after static_keys removal on an AMD
Ryzen 3900X, I couldn't tell any measurable performance difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
scx_ops_enq_last/exiting/migration_disabled are used to encode the
corresponding SCX_OPS_ flags into static_keys. These flags aren't hot enough
for static_key usage to make any meaningful difference and are made
static_keys mostly because there was no reason not to. However, global
static_keys can't work with the planned hierarchical multiple scheduler
support. Remove the static_keys and test the ops flags directly.
In repeated hackbench runs before and after static_keys removal on an AMD
Ryzen 3900X, I couldn't tell any measurable performance difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Now that all abuse is gone and the legit users are converted to
guard(msi_descs_lock), rename the lock functions and document them as
internal.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huwei.com>
Link: https://lore.kernel.org/all/20250319105506.864699741@linutronix.de
Provide a lock guard for MSI descriptor locking and update the core code
accordingly.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/all/20250319105506.144672678@linutronix.de
The size parameter is optional and strscpy() automatically determines
the length of the destination buffer using sizeof() if the argument is
omitted. This makes the explicit sizeof() calls unnecessary. Remove
them to shorten and simplify the code.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250318080755.61126-2-thorsten.blum@linux.dev
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The following causes a vsnprintf fault:
# echo 's:wake_lat char[] wakee; u64 delta;' >> /sys/kernel/tracing/dynamic_events
# echo 'hist:keys=pid:ts=common_timestamp.usecs if !(common_flags & 0x18)' > /sys/kernel/tracing/events/sched/sched_waking/trigger
# echo 'hist:keys=next_pid:delta=common_timestamp.usecs-$ts:onmatch(sched.sched_waking).trace(wake_lat,next_comm,$delta)' > /sys/kernel/tracing/events/sched/sched_switch/trigger
Because the synthetic event's "wakee" field is created as a dynamic string
(even though the string copied is not). The print format to print the
dynamic string changed from "%*s" to "%s" because another location
(__set_synth_event_print_fmt()) exported this to user space, and user
space did not need that. But it is still used in print_synth_event(), and
the output looks like:
<idle>-0 [001] d..5. 193.428167: wake_lat: wakee=(efault)sshd-sessiondelta=155
sshd-session-879 [001] d..5. 193.811080: wake_lat: wakee=(efault)kworker/u34:5delta=58
<idle>-0 [002] d..5. 193.811198: wake_lat: wakee=(efault)bashdelta=91
bash-880 [002] d..5. 193.811371: wake_lat: wakee=(efault)kworker/u35:2delta=21
<idle>-0 [001] d..5. 193.811516: wake_lat: wakee=(efault)sshd-sessiondelta=129
sshd-session-879 [001] d..5. 193.967576: wake_lat: wakee=(efault)kworker/u34:5delta=50
The length isn't needed as the string is always nul terminated. Just print
the string and not add the length (which was hard coded to the max string
length anyway).
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250407154139.69955768@gandalf.local.home
Fixes: 4d38328eb4 ("tracing: Fix synth event printk format for str fields");
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When building with W=1, this variable is unused for configs with
CONFIG_CMA_SIZE_SEL_PERCENTAGE=y:
kernel/dma/contiguous.c:67:26: error: 'size_bytes' defined but not used [-Werror=unused-const-variable=]
Change this to a macro to avoid the warning.
Fixes: c64be2bb1c ("drivers: add Contiguous Memory Allocator")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250409151557.3890443-1-arnd@kernel.org
Move sparc sysctls (reboot-cmd, stop-a, scons-poweroff and tsb-ratio)
into a new file (arch/sparc/kernel/setup.c). This file will be included
for both 32 and 64 bit sparc. Leave "tsb-ratio" under SPARC64 ifdef as
it was in kernel/sysctl.c. The sysctl table register is called with
arch_initcall placing it after its original place in proc_root_init.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Move stack_tracer_enabled into trace_stack_sysctl_table. This is part of
a greater effort to move ctl tables into their respective subsystems
which will reduce the merge conflicts in kernel/sysctl.c.
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Move trace ctl tables into their own const array in
kernel/trace/trace.c. The sysctl table register is called with
subsys_initcall placing if after its original place in proc_root_init.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Move print-fatal-signals into its own const ctl table array in
kernel/signal.c. This is part of a greater effort to move ctl tables
into their respective subsystems which will reduce the merge conflicts
in kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Move panic, panic_on_oops, panic_print, panic_on_warn into
kerne/panic.c. This is part of a greater effort to move ctl tables into
their respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
When booting BeagleBone Black:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/locking/lockdep.c:4398 lockdep_hardirqs_on_prepare+0x23c/0x280
DEBUG_LOCKS_WARN_ON(early_boot_irqs_disabled)
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.15.0-rc1-boneblack-00004-g195298c3b116 #209 NONE
Hardware name: Generic AM33XX (Flattened Device Tree)
Call trace:
_raw_spin_unlock_irq from irq_map_generic_chip+0x144/0x190
irq_map_generic_chip from irq_domain_associate_locked+0x68/0x164
irq_domain_associate_locked from irq_create_fwspec_mapping+0x34c/0x43c
irq_create_fwspec_mapping from irq_create_of_mapping+0x64/0x8c
irq_create_of_mapping from irq_of_parse_and_map+0x54/0x7c
irq_of_parse_and_map from dmtimer_clkevt_init_common+0x54/0x15c
dmtimer_clkevt_init_common from dmtimer_systimer_init+0x41c/0x5b8
dmtimer_systimer_init from timer_probe+0x68/0xf0
timer_probe from start_kernel+0x4a4/0x6bc
start_kernel from 0x0
irq event stamp: 0
hardirqs last enabled at (0): [<00000000>] 0x0
hardirqs last disabled at (0): [<00000000>] 0x0
softirqs last enabled at (0): [<00000000>] 0x0
softirqs last disabled at (0): [<00000000>] 0x0
---[ end trace 0000000000000000 ]---
and:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at init/main.c:1022 start_kernel+0x4e8/0x6bc
Interrupts were enabled early
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G W 6.15.0-rc1-boneblack-00004-g195298c3b116 #209 NONE
Tainted: [W]=WARN
Hardware name: Generic AM33XX (Flattened Device Tree)
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x6c/0x90
dump_stack_lvl from __warn+0x70/0x1b0
__warn from warn_slowpath_fmt+0x1d4/0x1ec
warn_slowpath_fmt from start_kernel+0x4e8/0x6bc
start_kernel from 0x0
irq event stamp: 0
hardirqs last enabled at (0): [<00000000>] 0x0
hardirqs last disabled at (0): [<00000000>] 0x0
softirqs last enabled at (0): [<00000000>] 0x0
softirqs last disabled at (0): [<00000000>] 0x0
---[ end trace 0000000000000000 ]---
Fix this by correcting two misconversions of
raw_spin_{,un}lock_irq{save,restore}() to lock guards.
Fixes: 195298c3b1 ("genirq/generic-chip: Convert core code to lock guards")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/514f94c5891c61ac0a4a7fdad113e75db1eea367.1744135467.git.geert+renesas@glider.be
- fprobe: Fix to remove fprobe_hlist_node when module unloading
When a fprobe target module is removed, the fprobe_hlist_node
should be removed from the fprobe's hash table to prevent reusing
accidentally if another module is loaded at the same address.
- fprobe: Fix to lock module while registering fprobe
The module containing the function to be probeed is locked using a
reference counter until the fprobe registration is complete, which
prevents use after free.
- fprobe-events: Fix possible UAF on modules
Basically as same as above, but in the fprobe-events layer we also
need to get module reference counter when we find the tracepoint
in the module.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmf0kJ8bHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8b+bEIALiFuYBn2y26OJnfaRnW
rgSC2JupswEVg7HwsN5kA/x1ypXl9SPfJGjbiHLUTq9+4KGOBTmY+k5/OpVO+Qkh
3nYKOkZxKRTglA7hRSTH0rxDV1eobps4nv/xkPjprugcjCGU54+4yb9Hq7Kyflpa
o8p+VS/0VOJ9f3Iy9a9JRfu9qE7Qzz9USCj4N64WMgx/qczPe27twqFEaUpTf1VW
Sw9twtKnqGs9hNE2QmhlzUBuq6gOZMXkjH6t1U4pMWBGB51JqZ5ZBhC4kL/5XEIZ
bEau82El5qdieQC2B7c0RxldceKa4t4QUlJDalZGKpxvTXrCw9rFyv0dRe2cXnKm
Yo0=
=I+MO
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- fprobe: remove fprobe_hlist_node when module unloading
When a fprobe target module is removed, the fprobe_hlist_node should
be removed from the fprobe's hash table to prevent reusing
accidentally if another module is loaded at the same address.
- fprobe: lock module while registering fprobe
The module containing the function to be probeed is locked using a
reference counter until the fprobe registration is complete, which
prevents use after free.
- fprobe-events: fix possible UAF on modules
Basically as same as above, but in the fprobe-events layer we also
need to get module reference counter when we find the tracepoint in
the module.
* tag 'probes-fixes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: fprobe: Cleanup fprobe hash when module unloading
tracing: fprobe events: Fix possible UAF on modules
tracing: fprobe: Fix to lock module while registering fprobe
- A number of cpuset remote partition related fixes and cleanups along with
selftest updates.
- A change from this merge window made cgroup_rstat_updated_list() called
outside cgroup_rstat_lock leading to list corruptions. Fix it by
relocating the call inside the lock.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZ/QMSQ4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGebUAP0bdg/hIX5OjhREbaDKWoUyAHnHqMdg3Dvngvhp
d9aOqQD/b1jdVfDINFtb2qjOpizPjyI0ycQxrr9K3DrSYmUAKAs=
=hFhq
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- A number of cpuset remote partition related fixes and cleanups along
with selftest updates.
- A change from this merge window made cgroup_rstat_updated_list()
called outside cgroup_rstat_lock leading to list corruptions. Fix it
by relocating the call inside the lock.
* tag 'cgroup-for-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Fix race between newly created partition and dying one
cgroup: rstat: call cgroup_rstat_updated_list with cgroup_rstat_lock
selftest/cgroup: Add a remote partition transition test to test_cpuset_prs.sh
selftest/cgroup: Clean up and restructure test_cpuset_prs.sh
selftest/cgroup: Update test_cpuset_prs.sh to use | as effective CPUs and state separator
cgroup/cpuset: Remove unneeded goto in sched_partition_write() and rename it
cgroup/cpuset: Code cleanup and comment update
cgroup/cpuset: Don't allow creation of local partition over a remote one
cgroup/cpuset: Remove remote_partition_check() & make update_cpumasks_hier() handle remote partition
cgroup/cpuset: Fix error handling in remote_partition_disable()
cgroup/cpuset: Fix incorrect isolated_cpus update in update_parent_effective_cpumask()
Pull for-6.15-fixes to receive:
e776b26e37 ("sched_ext: Remove cpu.weight / cpu.idle unimplemented warnings")
which conflicts with:
1a7ff7216c ("sched_ext: Drop "ops" from scx_ops_enable_state and friends")
The former removes code updated by the latter. Resolved by removing the
updated section.
Signed-off-by: Tejun Heo <tj@kernel.org>
poll_state_synchronize_srcu() uses rcu_seq_done() unlike
poll_state_synchronize_rcu() which uses rcu_seq_done_exact().
The rcu_seq_done_exact() makes more sense for polling API, as with
this API, there is a higher chance that there is a significant delay
between the get_state..() and poll_state..() calls since a cookie
can be stored and reused at a later time. During such a delay, if
the gp_seq counter progresses more than ULONG_MAX/2 distance, then
poll_state..() may return false for a long time unwantedly.
Fix by using the more accurate rcu_seq_done_exact() API which is
exactly what straight RCU's polling does.
It may make sense, as future work, to add debug code here as well, where
we compare a physical timestamp between get_state..() and poll_state()
calls and yell if significant time has past but the grace period has
still not progressed.
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
The exising code uses housekeeping_any_cpu() to select a cpu for
a given housekeeping task. However, this often ends up calling
cpumask_any_and() which is defined as cpumask_first_and() which has
the effect of alyways using the first cpu among those available.
The same applies when multiple NUMA nodes are involved. In that
case the first cpu in the local node is chosen which does provide
a bit of spreading but with multiple HK cpus per node the same
issues arise.
We have numerous cases where a single HK cpu just cannot keep up
and the remote_tick warning fires. It also can lead to the other
things (orchastration sw, HA keepalives etc) on the HK cpus getting
starved which leads to other issues. In these cases we recommend
increasing the number of HK cpus. But... that only helps the
userspace tasks somewhat. It does not help the actual housekeeping
part.
Spread the HK work out by having housekeeping_any_cpu() and
sched_numa_find_closest() use cpumask_any_and_distribute()
instead of cpumask_any_and().
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Reviewed-by: Vishal Chourasia <vishalc@linux.ibm.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20250218184618.1331715-1-pauld@redhat.com
Overview
========
When a CPU chooses to call push_rt_task and picks a task to push to
another CPU's runqueue then it will call find_lock_lowest_rq method
which would take a double lock on both CPUs' runqueues. If one of the
locks aren't readily available, it may lead to dropping the current
runqueue lock and reacquiring both the locks at once. During this window
it is possible that the task is already migrated and is running on some
other CPU. These cases are already handled. However, if the task is
migrated and has already been executed and another CPU is now trying to
wake it up (ttwu) such that it is queued again on the runqeue
(on_rq is 1) and also if the task was run by the same CPU, then the
current checks will pass even though the task was migrated out and is no
longer in the pushable tasks list.
Crashes
=======
This bug resulted in quite a few flavors of crashes triggering kernel
panics with various crash signatures such as assert failures, page
faults, null pointer dereferences, and queue corruption errors all
coming from scheduler itself.
Some of the crashes:
-> kernel BUG at kernel/sched/rt.c:1616! BUG_ON(idx >= MAX_RT_PRIO)
Call Trace:
? __die_body+0x1a/0x60
? die+0x2a/0x50
? do_trap+0x85/0x100
? pick_next_task_rt+0x6e/0x1d0
? do_error_trap+0x64/0xa0
? pick_next_task_rt+0x6e/0x1d0
? exc_invalid_op+0x4c/0x60
? pick_next_task_rt+0x6e/0x1d0
? asm_exc_invalid_op+0x12/0x20
? pick_next_task_rt+0x6e/0x1d0
__schedule+0x5cb/0x790
? update_ts_time_stats+0x55/0x70
schedule_idle+0x1e/0x40
do_idle+0x15e/0x200
cpu_startup_entry+0x19/0x20
start_secondary+0x117/0x160
secondary_startup_64_no_verify+0xb0/0xbb
-> BUG: kernel NULL pointer dereference, address: 00000000000000c0
Call Trace:
? __die_body+0x1a/0x60
? no_context+0x183/0x350
? __warn+0x8a/0xe0
? exc_page_fault+0x3d6/0x520
? asm_exc_page_fault+0x1e/0x30
? pick_next_task_rt+0xb5/0x1d0
? pick_next_task_rt+0x8c/0x1d0
__schedule+0x583/0x7e0
? update_ts_time_stats+0x55/0x70
schedule_idle+0x1e/0x40
do_idle+0x15e/0x200
cpu_startup_entry+0x19/0x20
start_secondary+0x117/0x160
secondary_startup_64_no_verify+0xb0/0xbb
-> BUG: unable to handle page fault for address: ffff9464daea5900
kernel BUG at kernel/sched/rt.c:1861! BUG_ON(rq->cpu != task_cpu(p))
-> kernel BUG at kernel/sched/rt.c:1055! BUG_ON(!rq->nr_running)
Call Trace:
? __die_body+0x1a/0x60
? die+0x2a/0x50
? do_trap+0x85/0x100
? dequeue_top_rt_rq+0xa2/0xb0
? do_error_trap+0x64/0xa0
? dequeue_top_rt_rq+0xa2/0xb0
? exc_invalid_op+0x4c/0x60
? dequeue_top_rt_rq+0xa2/0xb0
? asm_exc_invalid_op+0x12/0x20
? dequeue_top_rt_rq+0xa2/0xb0
dequeue_rt_entity+0x1f/0x70
dequeue_task_rt+0x2d/0x70
__schedule+0x1a8/0x7e0
? blk_finish_plug+0x25/0x40
schedule+0x3c/0xb0
futex_wait_queue_me+0xb6/0x120
futex_wait+0xd9/0x240
do_futex+0x344/0xa90
? get_mm_exe_file+0x30/0x60
? audit_exe_compare+0x58/0x70
? audit_filter_rules.constprop.26+0x65e/0x1220
__x64_sys_futex+0x148/0x1f0
do_syscall_64+0x30/0x80
entry_SYSCALL_64_after_hwframe+0x62/0xc7
-> BUG: unable to handle page fault for address: ffff8cf3608bc2c0
Call Trace:
? __die_body+0x1a/0x60
? no_context+0x183/0x350
? spurious_kernel_fault+0x171/0x1c0
? exc_page_fault+0x3b6/0x520
? plist_check_list+0x15/0x40
? plist_check_list+0x2e/0x40
? asm_exc_page_fault+0x1e/0x30
? _cond_resched+0x15/0x30
? futex_wait_queue_me+0xc8/0x120
? futex_wait+0xd9/0x240
? try_to_wake_up+0x1b8/0x490
? futex_wake+0x78/0x160
? do_futex+0xcd/0xa90
? plist_check_list+0x15/0x40
? plist_check_list+0x2e/0x40
? plist_del+0x6a/0xd0
? plist_check_list+0x15/0x40
? plist_check_list+0x2e/0x40
? dequeue_pushable_task+0x20/0x70
? __schedule+0x382/0x7e0
? asm_sysvec_reschedule_ipi+0xa/0x20
? schedule+0x3c/0xb0
? exit_to_user_mode_prepare+0x9e/0x150
? irqentry_exit_to_user_mode+0x5/0x30
? asm_sysvec_reschedule_ipi+0x12/0x20
Above are some of the common examples of the crashes that were observed
due to this issue.
Details
=======
Let's look at the following scenario to understand this race.
1) CPU A enters push_rt_task
a) CPU A has chosen next_task = task p.
b) CPU A calls find_lock_lowest_rq(Task p, CPU Z’s rq).
c) CPU A identifies CPU X as a destination CPU (X < Z).
d) CPU A enters double_lock_balance(CPU Z’s rq, CPU X’s rq).
e) Since X is lower than Z, CPU A unlocks CPU Z’s rq. Someone else has
locked CPU X’s rq, and thus, CPU A must wait.
2) At CPU Z
a) Previous task has completed execution and thus, CPU Z enters
schedule, locks its own rq after CPU A releases it.
b) CPU Z dequeues previous task and begins executing task p.
c) CPU Z unlocks its rq.
d) Task p yields the CPU (ex. by doing IO or waiting to acquire a
lock) which triggers the schedule function on CPU Z.
e) CPU Z enters schedule again, locks its own rq, and dequeues task p.
f) As part of dequeue, it sets p.on_rq = 0 and unlocks its rq.
3) At CPU B
a) CPU B enters try_to_wake_up with input task p.
b) Since CPU Z dequeued task p, p.on_rq = 0, and CPU B updates
B.state = WAKING.
c) CPU B via select_task_rq determines CPU Y as the target CPU.
4) The race
a) CPU A acquires CPU X’s lock and relocks CPU Z.
b) CPU A reads task p.cpu = Z and incorrectly concludes task p is
still on CPU Z.
c) CPU A failed to notice task p had been dequeued from CPU Z while
CPU A was waiting for locks in double_lock_balance. If CPU A knew
that task p had been dequeued, it would return NULL forcing
push_rt_task to give up the task p's migration.
d) CPU B updates task p.cpu = Y and calls ttwu_queue.
e) CPU B locks Ys rq. CPU B enqueues task p onto Y and sets task
p.on_rq = 1.
f) CPU B unlocks CPU Y, triggering memory synchronization.
g) CPU A reads task p.on_rq = 1, cementing its assumption that task p
has not migrated.
h) CPU A decides to migrate p to CPU X.
This leads to A dequeuing p from Y's queue and various crashes down the
line.
Solution
========
The solution here is fairly simple. After obtaining the lock (at 4a),
the check is enhanced to make sure that the task is still at the head of
the pushable tasks list. If not, then it is anyway not suitable for
being pushed out.
Testing
=======
The fix is tested on a cluster of 3 nodes, where the panics due to this
are hit every couple of days. A fix similar to this was deployed on such
cluster and was stable for more than 30 days.
Co-developed-by: Jon Kohler <jon@nutanix.com>
Signed-off-by: Jon Kohler <jon@nutanix.com>
Co-developed-by: Gauri Patwardhan <gauri.patwardhan@nutanix.com>
Signed-off-by: Gauri Patwardhan <gauri.patwardhan@nutanix.com>
Co-developed-by: Rahul Chunduru <rahul.chunduru@nutanix.com>
Signed-off-by: Rahul Chunduru <rahul.chunduru@nutanix.com>
Signed-off-by: Harshit Agarwal <harshit@nutanix.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: "Steven Rostedt (Google)" <rostedt@goodmis.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Tested-by: Will Ton <william.ton@nutanix.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250225180553.167995-1-harshit@nutanix.com
The numbers used in rcu_seq_done_exact() lack some explanation behind
their magic. Especially after the commit:
85aad7cc41 ("rcu: Fix get_state_synchronize_rcu_full() GP-start detection")
which reported a subtle issue where a new GP sequence snapshot was taken
on the root node state while a grace period had already been started and
reflected on the global state sequence but not yet on the root node
sequence, making a polling user waiting on a wrong already started grace
period that would ignore freshly online CPUs.
The fix involved taking the snaphot on the global state sequence and
waiting on the root node sequence. And since a grace period is first
started on the global state and only afterward reflected on the root
node, a snapshot taken on the global state sequence might be two full
grace periods ahead of the root node as in the following example:
rnp->gp_seq = rcu_state.gp_seq = 0
CPU 0 CPU 1
----- -----
// rcu_state.gp_seq = 1
rcu_seq_start(&rcu_state.gp_seq)
// snap = 8
snap = rcu_seq_snap(&rcu_state.gp_seq)
// Two full GP differences
rcu_seq_done_exact(&rnp->gp_seq, snap)
// rnp->gp_seq = 1
WRITE_ONCE(rnp->gp_seq, rcu_state.gp_seq);
Add a comment about those expectations and to clarify the magic within
the relevant function.
Note that the issue arises mainly with the use of rcu_seq_done_exact()
which has a much tigher guardband (of 2 GPs) to ensure the false-negative
window of the API during wraparound is limited to just 2 GPs.
rcu_seq_done() does not have such strict requirements, however its large
false-negative window of ULONG_MAX/2 is not ideal for the polling API.
However, this also means care is needed to ensure the guardband is as
large as needed to avoid the example scenario describe above which a
warning added in an earlier patch does.
[ Comment wordsmithing by Joel ]
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
With CONFIG_RT_GROUP_SCHED but runtime disabling of RT_GROUPs we expect
the existence of the root task_group only and all rt_sched_entity'ies
should be queued on root's rt_rq.
If we get a non-root RT_GROUP something went wrong.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250310170442.504716-9-mkoutny@suse.com
The previous patch improved the rcu_seq_done_exact() function by adding
a meaningful constant for the guardband.
Ensure that this is working for the future by a quick check during
rcu_gp_init().
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Thanks to kernel cmdline being available early, before any
cgroup hierarchy exists, we can achieve the RT_GROUP_SCHED boottime
disabling goal by simply skipping any creation (and destruction) of
RT_GROUP data and its exposure via RT attributes.
We can do this thanks to previously placed runtime guards that would
redirect all operations to root_task_group's data when RT_GROUP_SCHED
disabled.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250310170442.504716-8-mkoutny@suse.com
The rcu_seq_done_exact() function checks if a grace period has completed by
comparing sequence numbers. It includes a guard band to handle sequence number
wraparound, which was previously expressed using the magic number calculation
'3 * RCU_SEQ_STATE_MASK + 1'.
This magic number is not immediately obvious in terms of what it represents.
Instead, the reason we need this tiny guardband is because of the lag between
the setting of rcu_state.gp_seq_polled and root rnp's gp_seq in rcu_gp_init().
This guardband needs to be at least 2 GPs worth of counts, to avoid recognizing
the newly started GP as completed immediately, due to the following sequence
which arises due to the delay between update of rcu_state.gp_seq_polled and
root rnp's gp_seq:
rnp->gp_seq = rcu_state.gp_seq = 0
CPU 0 CPU 1
----- -----
// rcu_state.gp_seq = 1
rcu_seq_start(&rcu_state.gp_seq)
// snap = 8
snap = rcu_seq_snap(&rcu_state.gp_seq)
// Two full GP differences
rcu_seq_done_exact(&rnp->gp_seq, snap)
// rnp->gp_seq = 1
WRITE_ONCE(rnp->gp_seq, rcu_state.gp_seq);
This can happen due to get_state_synchronize_rcu_full() sampling
rcu_state.gp_seq_polled, however the poll_state_synchronize_rcu_full()
sampling the root rnp's gp_seq. The delay between the update of the 2
counters occurs in rcu_gp_init() during which the counters briefly go
out of sync.
Make the guardband explictly 2 GPs. This improves code readability and
maintainability by making the intent clearer as well.
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
When RT_GROUPs are compiled but not exposed, their bandwidth cannot
be configured (and it is not initialized for non-root task_groups neither).
Therefore bypass any checks of task vs task_group bandwidth.
This will achieve behavior very similar to setups that have
!CONFIG_RT_GROUP_SCHED and attach cpu controller to cgroup v2 hierarchy.
(On a related note, this may allow having RT tasks with
CONFIG_RT_GROUP_SCHED and cgroup v2 hierarchy.)
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250310170442.504716-7-mkoutny@suse.com
First, we want to prevent placement of RT tasks on non-root rt_rqs which
we achieve in the task migration code that'd fall back to
root_task_group's rt_rq.
Second, we want to work with only root_task_group's rt_rq when iterating
all "real" rt_rqs when RT_GROUP is disabled. To achieve this we keep
root_task_group as the first one on the task_groups and break out
quickly.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250310170442.504716-6-mkoutny@suse.com
rt_rq->tg may be NULL which denotes the root task_group.
Store the pointer to root_task_group directly so that callers may use
rt_rq->tg homogenously.
root_task_group exists always with CONFIG_CGROUPS_SCHED,
CONFIG_RT_GROUP_SCHED depends on that.
This changes root level rt_rq's default limit from infinity to the
value of (originally) global RT throttling.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250310170442.504716-4-mkoutny@suse.com
rt_entity_is_task has split definitions based on CONFIG_RT_GROUP_SCHED,
therefore we can use it always. No functional change intended.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250310170442.504716-3-mkoutny@suse.com
Convert the blocks guarded by macros to regular code so that the RT
group code gets more compile validation. Reasoning is in
Documentation/process/coding-style.rst 21) Conditional Compilation.
With that, no functional change is expected.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250310170442.504716-2-mkoutny@suse.com
commit 10a35e6812 ("sched/pelt: Skip updating util_est when
utilization is higher than CPU's capacity")
prevents util_est from being updated if util_avg is higher than the
underlying CPU capacity to avoid overestimating the task when the CPU
is capped (due to thermal issue for instance). In this scenario, the
task will miss its deadlines and start overlapping its wake-up events
for instance. The task will appear as always running when the CPU is
just not powerful enough to allow having a good estimation of the
task.
commit b8c9636140 ("sched/fair/util_est: Implement faster ramp-up
EWMA on utilization increases")
sets ewma to util_avg when ewma > util_avg, allowing ewma to quickly
grow instead of slowly converge to the new util_avg value when a task
profile changes from small to big.
However, the 2 conditions:
- Check util_avg against max CPU capacity
- Check whether util_est > util_avg
are placed in an order such as it is possible to set util_est to a
value higher than the CPU capacity if util_est > util_avg, but
util_est is prevented to decay as long as:
CPU capacity < util_avg < util_est.
Just remove the check as either:
1.
There is idle time on the CPU. In that case the util_avg value of the
task is actually correct. It is possible that the task missed a
deadline and appears bigger, but this is also the case when the
util_avg of the task is lower than the maximum CPU capacity.
2.
There is no idle time. In that case, the util_avg value might aswell
be an under estimation of the size of the task.
It is possible that undesired frequency spikes will appear when the
task is later enqueued with an inflated util_est value, but the
frequency spike might aswell be deserved. The absence of idle time
prevents from drawing any conclusion.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.rog>
Link: https://lore.kernel.org/r/20250325150542.1077344-1-pierre.gondois@arm.com
Simplify the topology_span_sane code further, removing the need to
allocate an array and gotos used to make sure the array gets freed.
This version is in a separate commit because it could return a
different sanity result than the previous code, but only in odd
circumstances that are not expected to actually occur; for example,
when a CPU is not listed in its own mask.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Link: https://lore.kernel.org/r/20250304160844.75373-3-steve.wahl@hpe.com
Use a different approach to topology_span_sane(), that checks for the
same constraint of no partial overlaps for any two CPU sets for
non-NUMA topology levels, but does so in a way that is O(N) rather
than O(N^2).
Instead of comparing with all other masks to detect collisions, keep
one mask that includes all CPUs seen so far and detect collisions with
a single cpumask_intersects test.
If the current mask has no collisions with previously seen masks, it
should be a new mask, which can be uniquely identified by the lowest
bit set in this mask. Keep a pointer to this mask for future
reference (in an array indexed by the lowest bit set), and add the
CPUs in this mask to the list of those seen.
If the current mask does collide with previously seen masks, it should
be exactly equal to a mask seen before, looked up in the same array
indexed by the lowest bit set in the mask, a single comparison.
Move the topology_span_sane() check out of the existing topology level
loop, let it use its own loop so that the array allocation can be done
only once, shared across levels.
On a system with 1920 processors (16 sockets, 60 cores, 2 threads),
the average time to take one processor offline is reduced from 2.18
seconds to 1.01 seconds. (Off-lining 959 of 1920 processors took
34m49.765s without this change, 16m10.038s with this change in place.)
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Link: https://lore.kernel.org/r/20250304160844.75373-2-steve.wahl@hpe.com
Gabriele noted that in case of signal_pending_state(), the tracepoint
sees a stale task-state.
Fixes: fa2c3254d7 ("sched/tracing: Don't re-read p->state when emitting sched_switch event")
Reported-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Previously it was only safe to call perf_pmu_unregister() if there
were no active events of that pmu around -- which was impossible to
guarantee since it races all sorts against perf_init_event().
Rework the whole thing by:
- keeping track of all events for a given pmu
- 'hiding' the pmu from perf_init_event()
- waiting for the appropriate (s)rcu grace periods such that all
prior references to the PMU will be completed
- detaching all still existing events of that pmu (see first point)
and moving them to a new REVOKED state.
- actually freeing the pmu data.
Where notably the new REVOKED state must inhibit all event actions
from reaching code that wants to use event->pmu.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lkml.kernel.org/r/20250307193723.525402029@infradead.org
The task passed to perf_event_exit_task() is not a child, it is
current. Fix this confusing naming, since much of the rest of the code
also relies on it being current.
Specifically, both exec() and exit() callers use it with current as
the argument.
Notably, task_ctx_sched_out() doesn't make much sense outside of
current.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lkml.kernel.org/r/20250307193305.486326750@infradead.org
Both perf_event_free_task() and perf_event_exit_task_context() are
very similar, except perf_event_exit_task_context() is a little more
generic / makes less assumptions.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lkml.kernel.org/r/20250307193723.274039710@infradead.org
There is no good reason to have the free list anymore. It is possible
to call free_event() after the locks have been dropped in the main
loop.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lkml.kernel.org/r/20250307193723.151721102@infradead.org
Simplify the code by moving the duplicated wakeup condition into
put_ctx().
Notably, wait_var_event() is in perf_event_free_task() and will have
set ctx->task = TASK_TOMBSTONE.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lkml.kernel.org/r/20250307193723.044499344@infradead.org
Currently perf_event_release_kernel() will iterate the child events and attempt
tear-down. However, it removes them from the child_list using list_move(),
notably skipping the state management done by perf_child_detach().
Crucially, it fails to clear PERF_ATTACH_CHILD, which opens the door for a
concurrent perf_remove_from_context() to race.
This way child_list management stays fully serialized using child_mutex.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lkml.kernel.org/r/20250307193305.486326750@infradead.org
Ravi reported that the bpf_perf_link_attach() usage of
perf_event_set_bpf_prog() is not serialized by ctx->mutex, unlike the
PERF_EVENT_IOC_SET_BPF case.
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lkml.kernel.org/r/20250307193305.486326750@infradead.org
Perf can hang while freeing a sigtrap event if a related deferred
signal hadn't managed to be sent before the file got closed:
perf_event_overflow()
task_work_add(perf_pending_task)
fput()
task_work_add(____fput())
task_work_run()
____fput()
perf_release()
perf_event_release_kernel()
_free_event()
perf_pending_task_sync()
task_work_cancel() -> FAILED
rcuwait_wait_event()
Once task_work_run() is running, the list of pending callbacks is
removed from the task_struct and from this point on task_work_cancel()
can't remove any pending and not yet started work items, hence the
task_work_cancel() failure and the hang on rcuwait_wait_event().
Task work could be changed to remove one work at a time, so a work
running on the current task can always cancel a pending one, however
the wait / wake design is still subject to inverted dependencies when
remote targets are involved, as pictured by Oleg:
T1 T2
fd = perf_event_open(pid => T2->pid); fd = perf_event_open(pid => T1->pid);
close(fd) close(fd)
<IRQ> <IRQ>
perf_event_overflow() perf_event_overflow()
task_work_add(perf_pending_task) task_work_add(perf_pending_task)
</IRQ> </IRQ>
fput() fput()
task_work_add(____fput()) task_work_add(____fput())
task_work_run() task_work_run()
____fput() ____fput()
perf_release() perf_release()
perf_event_release_kernel() perf_event_release_kernel()
_free_event() _free_event()
perf_pending_task_sync() perf_pending_task_sync()
rcuwait_wait_event() rcuwait_wait_event()
Therefore the only option left is to acquire the event reference count
upon queueing the perf task work and release it from the task work, just
like it was done before 3a5465418f ("perf: Fix event leak upon exec and file release")
but without the leaks it fixed.
Some adjustments are necessary to make it work:
* A child event might dereference its parent upon freeing. Care must be
taken to release the parent last.
* Some places assuming the event doesn't have any reference held and
therefore can be freed right away must instead put the reference and
let the reference counting to its job.
Reported-by: "Yi Lai" <yi1.lai@linux.intel.com>
Closes: https://lore.kernel.org/all/Zx9Losv4YcJowaP%2F@ly-workstation/
Reported-by: syzbot+3c4321e10eea460eb606@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/673adf75.050a0220.87769.0024.GAE@google.com/
Fixes: 3a5465418f ("perf: Fix event leak upon exec and file release")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250304135446.18905-1-frederic@kernel.org
The rcu_torture_one_read() function is designed for RCU readers that are
confined to a task, such that a single thread of control extends from the
beginning of a given RCU read-side critical section to its end. This does
not suffice for things like srcu_down_read() and srcu_up_read(), where
the critical section might start at task level and end in a timer handler.
This commit therefore creates separate init_rcu_torture_one_read_state(),
rcu_torture_one_read_start(), and rcu_torture_one_read_end() functions,
along with a rcu_torture_one_read_state structure to coordinate their
actions. These will be used to create tests for srcu_down_read()
and friends.
One caution: The caller to rcu_torture_one_read_start() must enter the
initial read-side critical section prior to the call. This enables use
of non-standard primitives such as srcu_down_read() while still using
the same validation code.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
SCX_OPS_HAS_CGROUP_WEIGHT was only used to suppress the missing cgroup
weight support warnings. Now that the warnings are removed, the flag doesn't
do anything. Mark it for deprecation and remove its usage from scx_flatcg.
v2: Actually include the scx_flatcg update.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-and-reviewed-by: Andrea Righi <arighi@nvidia.com>
sched_ext generates warnings when cpu.weight / cpu.idle are set to
non-default values if the BPF scheduler doesn't implement weight support.
These warnings don't provide much value while adding constant annoyance. A
BPF scheduler may not implement any particular behavior and there's nothing
particularly special about missing cgroup weight support. Drop the warnings.
Signed-off-by: Tejun Heo <tj@kernel.org>
Replace kzalloc with kvzalloc for the exit_dump buffer allocation, which
can require large contiguous memory depending on the implementation.
This change prevents allocation failures by allowing the system to fall
back to vmalloc when contiguous memory allocation fails.
Since this buffer is only used for debugging purposes, physical memory
contiguity is not required, making vmalloc a suitable alternative.
Cc: stable@vger.kernel.org
Fixes: 07814a9439 ("sched_ext: Print debug dump after an error exit")
Suggested-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The lookup_one_len family of functions is (now) only used internally by
a filesystem on itself either
- in a context where permission checking is irrelevant such as by a
virtual filesystem populating itself, or xfs accessing its ORPHANAGE
or dquota accessing the quota file; or
- in a context where a permission check (MAY_EXEC on the parent) has just
been performed such as a network filesystem finding in "silly-rename"
file in the same directory. This is also the context after the
_parentat() functions where currently lookup_one_qstr_excl() is used.
So the permission check is pointless.
The name "one_len" is unhelpful in understanding the purpose of these
functions and should be changed. Most of the callers pass the len as
"strlen()" so using a qstr and QSTR() can simplify the code.
This patch renames these functions (include lookup_positive_unlocked()
which is part of the family despite the name) to have a name based on
"lookup_noperm". They are changed to receive a 'struct qstr' instead
of separate name and len. In a few cases the use of QSTR() results in a
new call to strlen().
try_lookup_noperm() takes a pointer to a qstr instead of the whole
qstr. This is consistent with d_hash_and_lookup() (which is nearly
identical) and useful for lookup_noperm_unlocked().
The new lookup_noperm_common() doesn't take a qstr yet. That will be
tidied up in a subsequent patch.
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/r/20250319031545.2999807-5-neil@brown.name
Signed-off-by: Christian Brauner <brauner@kernel.org>
Cleanup fprobe address hash table on module unloading because the
target symbols will be disappeared when unloading module and not
sure the same symbol is mapped on the same address.
Note that this is at least disables the fprobes if a part of target
symbols on the unloaded modules. Unlike kprobes, fprobe does not
re-enable the probe point by itself. To do that, the caller should
take care register/unregister fprobe when loading/unloading modules.
This simplifies the fprobe state managememt related to the module
loading/unloading.
Link: https://lore.kernel.org/all/174343534473.843280.13988101014957210732.stgit@devnote2/
Fixes: 4346ba1604 ("fprobe: Rewrite fprobe on function-graph tracer")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Add WARN_ON_ONCE() statements whenever new exclusive CPUs are being
added to a partition root to catch inconsistency in the way exclusive
CPUs are being handled in the cpuset code.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Move the partition disablement comment from cpuset_css_offline()
to cpuset_css_killed() and reword it to remove the remnant of
sched.partition.
Suggested-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The current cpuset code uses both cpu_active_mask and cpu_online_mask
and it can be confusing which one should be used if we need to update
the code.
The top_cpuset is always synchronized to cpu_active_mask and we should
avoid using cpu_online_mask as much as possible. An active CPU is always
an online CPU, but not vice versa. cpu_active_mask and cpu_online_mask
can differ during hotplug operations.
A CPU is marked active at the last stage of CPU bringup (CPUHP_AP_ACTIVE).
It is also the stage where cpuset hotplug code will be called to update
the sched domains so that the scheduler can move a normal task to a
newly active CPU or remove tasks away from a newly inactivated CPU. The
online bit is set much earlier in the CPU bringup process and cleared
much later in CPU teardown.
If cpu_online_mask is used while a hotunplug operation is happening in
parallel, we may leave an offline CPU in cpu_allowed or have a higher
chance of leaving an offline CPU in some other masks. Avoid this
problem by always using cpu_active_mask in the cpuset code and leave
a comment as to why the use of cpu_online_mask is discouraged.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Avoid a false-positive lockdep warning in the CONFIG_PREEMPT_RT=y
configuration when using write_seqcount_begin() in the uprobe timer
callback by using raw_write_* APIs.
Uprobe's use of timer callback is guaranteed to not race with itself
for a given uprobe_task, and as such seqcount's insistence on having
preemption disabled on the writer side is irrelevant. So switch to
raw_ variants of seqcount API instead of disabling preemption unnecessarily.
Also, point out in the comments more explicitly why we use seqcount
despite our reader side being rather simple and never retrying. We favor
well-maintained kernel primitive in favor of open-coding our own memory
barriers.
Fixes: 8622e45b5d ("uprobes: Reuse return_instances between multiple uretprobes within task")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Suggested-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20250404194848.2109539-1-andrii@kernel.org
Provide a new kfunc, scx_bpf_select_cpu_and(), that can be used to apply
the built-in idle CPU selection policy to a subset of allowed CPU.
This new helper is basically an extension of scx_bpf_select_cpu_dfl().
However, when an idle CPU can't be found, it returns a negative value
instead of @prev_cpu, aligning its behavior more closely with
scx_bpf_pick_idle_cpu().
It also accepts %SCX_PICK_IDLE_* flags, which can be used to enforce
strict selection to @prev_cpu's node (%SCX_PICK_IDLE_IN_NODE), or to
request only a full-idle SMT core (%SCX_PICK_IDLE_CORE), while applying
the built-in selection logic.
With this helper, BPF schedulers can apply the built-in idle CPU
selection policy restricted to any arbitrary subset of CPUs.
Example usage
=============
Possible usage in ops.select_cpu():
s32 BPF_STRUCT_OPS(foo_select_cpu, struct task_struct *p,
s32 prev_cpu, u64 wake_flags)
{
const struct cpumask *cpus = task_allowed_cpus(p) ?: p->cpus_ptr;
s32 cpu;
cpu = scx_bpf_select_cpu_and(p, prev_cpu, wake_flags, cpus, 0);
if (cpu >= 0) {
scx_bpf_dsq_insert(p, SCX_DSQ_LOCAL, SCX_SLICE_DFL, 0);
return cpu;
}
return prev_cpu;
}
Results
=======
Load distribution on a 4 sockets, 4 cores per socket system, simulated
using virtme-ng, running a modified version of scx_bpfland that uses
scx_bpf_select_cpu_and() with 0xff00 as the allowed subset of CPUs:
$ vng --cpu 16,sockets=4,cores=4,threads=1
...
$ stress-ng -c 16
...
$ htop
...
0[ 0.0%] 8[||||||||||||||||||||||||100.0%]
1[ 0.0%] 9[||||||||||||||||||||||||100.0%]
2[ 0.0%] 10[||||||||||||||||||||||||100.0%]
3[ 0.0%] 11[||||||||||||||||||||||||100.0%]
4[ 0.0%] 12[||||||||||||||||||||||||100.0%]
5[ 0.0%] 13[||||||||||||||||||||||||100.0%]
6[ 0.0%] 14[||||||||||||||||||||||||100.0%]
7[ 0.0%] 15[||||||||||||||||||||||||100.0%]
With scx_bpf_select_cpu_dfl() tasks would be distributed evenly across
all the available CPUs.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Many scx schedulers implement their own hard or soft-affinity rules
to support topology characteristics, such as heterogeneous architectures
(e.g., big.LITTLE, P-cores/E-cores), or to categorize tasks based on
specific properties (e.g., running certain tasks only in a subset of
CPUs).
Currently, there is no mechanism that allows to use the built-in idle
CPU selection policy to an arbitrary subset of CPUs. As a result,
schedulers often implement their own idle CPU selection policies, which
are typically similar to one another, leading to a lot of code
duplication.
To address this, modify scx_select_cpu_dfl() to accept an arbitrary
cpumask, that can be used by the BPF schedulers to apply the existent
built-in idle CPU selection policy to a subset of allowed CPUs.
With this concept the idle CPU selection policy becomes the following:
- always prioritize CPUs from fully idle SMT cores (if SMT is enabled),
- select the same CPU if it's idle and in the allowed CPUs,
- select an idle CPU within the same LLC, if the LLC cpumask is a
subset of the allowed CPUs,
- select an idle CPU within the same node, if the node cpumask is a
subset of the allowed CPUs,
- select an idle CPU within the allowed CPUs.
This functionality will be exposed through a dedicated kfunc in a
separate patch.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Modify scx_select_cpu_dfl() to take the allowed cpumask as an explicit
argument, instead of implicitly using @p->cpus_ptr.
This prepares for future changes where arbitrary cpumasks may be passed
to the built-in idle CPU selection policy.
This is a pure refactoring with no functional changes.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The built-in idle selection policy, scx_select_cpu_dfl(), always
prioritizes picking idle CPUs within the same LLC or NUMA node, but
these optimizations are currently applied only when a task has no CPU
affinity constraints.
This is done primarily for efficiency, as it avoids the overhead of
updating a cpumask every time we need to select an idle CPU (which can
be costly in large SMP systems).
However, this approach limits the effectiveness of the built-in idle
policy and results in inconsistent behavior, as affinity-restricted
tasks don't benefit from topology-aware optimizations.
To address this, modify the policy to apply LLC and NUMA-aware
optimizations even when a task is constrained to a subset of CPUs.
We can still avoid updating the cpumasks by checking if the subset of
LLC and node CPUs are contained in the subset of allowed CPUs usable by
the task (which is true in most of the cases - for tasks that don't have
affinity constratints).
Moreover, use temporary local per-CPU cpumasks to determine the LLC and
node subsets, minimizing potential overhead even on large SMP systems.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The function get_vm_area() is not defined for non-MMU builds and causes a
build error if it is used. Hide the map_pages() function around a:
#ifdef CONFIG_MMU
to keep it from being compiled when CONFIG_MMU is not set.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250407120111.2ccc9319@gandalf.local.home
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/4f8ece8b-8862-4f7c-8ede-febd28f8a9fe@roeck-us.net/
Fixes: 394f3f02de ("tracing: Use vmap_page_range() to map memmap ring buffer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This large commit contains the initial support for TDX in KVM. All x86
parts enable the host-side hypercalls that KVM uses to talk to the TDX
module, a software component that runs in a special CPU mode called SEAM
(Secure Arbitration Mode).
The series is in turn split into multiple sub-series, each with a separate
merge commit:
- Initialization: basic setup for using the TDX module from KVM, plus
ioctls to create TDX VMs and vCPUs.
- MMU: in TDX, private and shared halves of the address space are mapped by
different EPT roots, and the private half is managed by the TDX module.
Using the support that was added to the generic MMU code in 6.14,
add support for TDX's secure page tables to the Intel side of KVM.
Generic KVM code takes care of maintaining a mirror of the secure page
tables so that they can be queried efficiently, and ensuring that changes
are applied to both the mirror and the secure EPT.
- vCPU enter/exit: implement the callbacks that handle the entry of a TDX
vCPU (via the SEAMCALL TDH.VP.ENTER) and the corresponding save/restore
of host state.
- Userspace exits: introduce support for guest TDVMCALLs that KVM forwards to
userspace. These correspond to the usual KVM_EXIT_* "heavyweight vmexits"
but are triggered through a different mechanism, similar to VMGEXIT for
SEV-ES and SEV-SNP.
- Interrupt handling: support for virtual interrupt injection as well as
handling VM-Exits that are caused by vectored events. Exclusive to
TDX are machine-check SMIs, which the kernel already knows how to
handle through the kernel machine check handler (commit 7911f145de,
"x86/mce: Implement recovery for errors in TDX/SEAM non-root mode")
- Loose ends: handling of the remaining exits from the TDX module, including
EPT violation/misconfig and several TDVMCALL leaves that are handled in
the kernel (CPUID, HLT, RDMSR/WRMSR, GetTdVmCallInfo); plus returning
an error or ignoring operations that are not supported by TDX guests
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the irq_gc_lock/unlock() pairs with guards. There is no point to
implement a guard wrapper for them as they just wrap around raw_spin_lock*().
Switch the other lock instances in the core code to guards as well.
Conversion was done with Coccinelle plus manual fixups.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/all/20250313142524.073826193@linutronix.de
We currently report EINVAL whenever a struct pid has no tasked attached
anymore thereby conflating two concepts:
(1) The task has already been reaped.
(2) The caller requested a pidfd for a thread-group leader but the pid
actually references a struct pid that isn't used as a thread-group
leader.
This is causing issues for non-threaded workloads as in [1].
This patch tries to allow userspace to distinguish between (1) and (2).
This is racy of course but that shouldn't matter.
Link: https://github.com/systemd/systemd/pull/36982 [1]
Link: https://lore.kernel.org/r/20250403-work-pidfd-fixes-v1-3-a123b6ed6716@kernel.org
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Percpu-rwsems are used for superblock locking. However, we know the
read percpu-rwsem we take for sb_start_write() on a frozen filesystem
needs not to inhibit system from suspending or hibernating. That
means it needs to wait with TASK_UNINTERRUPTIBLE | TASK_FREEZABLE.
Introduce a new percpu_down_read_freezable() that allows us to control
whether TASK_FREEZABLE is added to the wait flags.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Link: https://lore.kernel.org/r/20250327140613.25178-2-James.Bottomley@HansenPartnership.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add new function *_twothreecell() to extend support to parse three-cell
interrupts which encoded as <instance hwirq irqflag>, the translate
function will retrieve irq number and flag from last two cells.
This API will be used in gpio irq driver which need to work with
two or three cells cases.
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250326-04-gpio-irq-threecell-v3-1-aab006ab0e00@gentoo.org
Move the get_ctx(child_ctx) call and the child_event->ctx assignment to
occur immediately after the child event is allocated. Ensure that
child_event->ctx is non-NULL before any subsequent error path within
inherit_event calls free_event(), satisfying the assumptions of the
cleanup code.
Details:
There's no clear Fixes tag, because this bug is a side-effect of
multiple interacting commits over time (up to 15 years old), not
a single regression.
The code initially incremented refcount then assigned context
immediately after the child_event was created. Later, an early
validity check for child_event was added before the
refcount/assignment. Even later, a WARN_ON_ONCE() cleanup check was
added, assuming event->ctx is valid if the pmu_ctx is valid.
The problem is that the WARN_ON_ONCE() could trigger after the initial
check passed but before child_event->ctx was assigned, violating its
precondition. The solution is to assign child_event->ctx right after
its initial validation. This ensures the context exists for any
subsequent checks or cleanup routines, resolving the WARN_ON_ONCE().
To resolve it, defer the refcount update and child_event->ctx assignment
directly after child_event->pmu_ctx is set but before checking if the
parent event is orphaned. The cleanup routine depends on
event->pmu_ctx being non-NULL before it verifies event->ctx is
non-NULL. This also maintains the author's original intent of passing
in child_ctx to find_get_pmu_context before its refcount/assignment.
[ mingo: Expanded the changelog from another email by Gabriel Shahrouzi. ]
Reported-by: syzbot+ff3aa851d46ab82953a3@syzkaller.appspotmail.com
Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20250405203036.582721-1-gshahrouzi@gmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ff3aa851d46ab82953a3
1) Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
2) The final cleanup of the hrtimer_init() to hrtimer_setup() conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline and
all new users are catched.
Doing this right before rc1 ensures that new code which is merged post rc1
is not introducing new instances of the original functionality.
-----BEGIN PGP SIGNATURE-----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=8Ftq
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A set of final cleanups for the timer subsystem:
- Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
- The final cleanup of the hrtimer_init() to hrtimer_setup()
conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline
and all new users are catched.
Doing this right before rc1 ensures that new code which is merged post
rc1 is not introducing new instances of the original functionality"
* tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracing/timers: Rename the hrtimer_init event to hrtimer_setup
hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack()
hrtimers: Rename debug_init() to debug_setup()
hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper()
hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns()
hrtimers: Make callback function pointer private
hrtimers: Merge __hrtimer_init() into __hrtimer_setup()
hrtimers: Switch to use __htimer_setup()
hrtimers: Delete hrtimer_init()
treewide: Convert new and leftover hrtimer_init() users
treewide: Switch/rename to timer_delete[_sync]()
1) A treewide cleanup for the irq_domain code, which makes the naming
consistent and gets rid of the original oddity of naming domains
'host'.
This is a trivial mechanical change and is done late to ensure that
all instances have been catched and new code merged post rc1 wont
reintroduce new instances.
2) A trivial consistency fix in the migration code
The recent introduction of irq_force_complete_move() in the core
code, causes a problem for the nostalgia crowd who maintains ia64 out
of tree.
The code assumes that hierarchical interrupt domains are enabled and
dereferences irq_data::parent_data unconditionally. That works in mainline
because both architectures which enable that code have hierarchical domains
enabled. Though it breaks the ia64 build, which enables the functionality,
but does not have hierarchical domains.
While it's not really a problem for mainline today, this
unconditional dereference is inconsistent and trivially fixable by
using the existing helper function irqd_get_parent_data(), which has
the appropriate #ifdeffery in place.
-----BEGIN PGP SIGNATURE-----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=lhoB
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more irq updates from Thomas Gleixner:
"A set of updates for the interrupt subsystem:
- A treewide cleanup for the irq_domain code, which makes the naming
consistent and gets rid of the original oddity of naming domains
'host'.
This is a trivial mechanical change and is done late to ensure that
all instances have been catched and new code merged post rc1 wont
reintroduce new instances.
- A trivial consistency fix in the migration code
The recent introduction of irq_force_complete_move() in the core
code, causes a problem for the nostalgia crowd who maintains ia64
out of tree.
The code assumes that hierarchical interrupt domains are enabled
and dereferences irq_data::parent_data unconditionally. That works
in mainline because both architectures which enable that code have
hierarchical domains enabled. Though it breaks the ia64 build,
which enables the functionality, but does not have hierarchical
domains.
While it's not really a problem for mainline today, this
unconditional dereference is inconsistent and trivially fixable by
using the existing helper function irqd_get_parent_data(), which
has the appropriate #ifdeffery in place"
* tag 'irq-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/migration: Use irqd_get_parent_data() in irq_force_complete_move()
irqdomain: Stop using 'host' for domain
irqdomain: Rename irq_get_default_host() to irq_get_default_domain()
irqdomain: Rename irq_set_default_host() to irq_set_default_domain()
The recent change to prevent that time goes backwards for the coarse time
getters due to immediate multiplier adjustments via adjtimex(), changed the
way how the timekeeping core treats that.
That change result in a regression on the adjtimex() side, which is user
space visible:
1) The forwarding of the base time moves the update out of the original
period and establishes a new one. That's changing the behaviour of the
[PF]LL control, which user space expects to be applied periodically.
2) The clearing of the accumulated NTP error due to #1, changes the
behaviour as well.
It was tried to delay the multiplier/frequency update to the next tick, but
that did not solve the problem as userspace expects that the multiplier or
frequency updates are in effect, when the syscall returns.
There is a different solution for the coarse time problem available, so
revert the offending commit to restore the existing adjtimex() behaviour.
-----BEGIN PGP SIGNATURE-----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=0MEH
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A revert to fix a adjtimex() regression:
The recent change to prevent that time goes backwards for the coarse
time getters due to immediate multiplier adjustments via adjtimex(),
changed the way how the timekeeping core treats that.
That change result in a regression on the adjtimex() side, which is
user space visible:
1) The forwarding of the base time moves the update out of the
original period and establishes a new one. That's changing the
behaviour of the [PF]LL control, which user space expects to be
applied periodically.
2) The clearing of the accumulated NTP error due to #1, changes the
behaviour as well.
An attempt to delay the multiplier/frequency update to the next tick
did not solve the problem as userspace expects that the multiplier or
frequency updates are in effect, when the syscall returns.
There is a different solution for the coarse time problem available,
so revert the offending commit to restore the existing adjtimex()
behaviour"
* tag 'timers-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "timekeeping: Fix possible inconsistencies in _COARSE clockids"
- Improve performance in gendwarfksyms
- Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS
- Support CONFIG_HEADERS_INSTALL for ARCH=um
- Use more relative paths to sources files for better reproducibility
- Support the loong64 Debian architecture
- Add Kbuild bash completion
- Introduce intermediate vmlinux.unstripped for architectures that need
static relocations to be stripped from the final vmlinux
- Fix versioning in Debian packages for -rc releases
- Treat missing MODULE_DESCRIPTION() as an error
- Convert Nios2 Makefiles to use the generic rule for built-in DTB
- Add debuginfo support to the RPM package
-----BEGIN PGP SIGNATURE-----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=GiQ6
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Improve performance in gendwarfksyms
- Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS
- Support CONFIG_HEADERS_INSTALL for ARCH=um
- Use more relative paths to sources files for better reproducibility
- Support the loong64 Debian architecture
- Add Kbuild bash completion
- Introduce intermediate vmlinux.unstripped for architectures that need
static relocations to be stripped from the final vmlinux
- Fix versioning in Debian packages for -rc releases
- Treat missing MODULE_DESCRIPTION() as an error
- Convert Nios2 Makefiles to use the generic rule for built-in DTB
- Add debuginfo support to the RPM package
* tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
kbuild: rpm-pkg: build a debuginfo RPM
kconfig: merge_config: use an empty file as initfile
nios2: migrate to the generic rule for built-in DTB
rust: kbuild: skip `--remap-path-prefix` for `rustdoc`
kbuild: pacman-pkg: hardcode module installation path
kbuild: deb-pkg: don't set KBUILD_BUILD_VERSION unconditionally
modpost: require a MODULE_DESCRIPTION()
kbuild: make all file references relative to source root
x86: drop unnecessary prefix map configuration
kbuild: deb-pkg: add comment about future removal of KDEB_COMPRESS
kbuild: Add a help message for "headers"
kbuild: deb-pkg: remove "version" variable in mkdebian
kbuild: deb-pkg: fix versioning for -rc releases
Documentation/kbuild: Fix indentation in modules.rst example
x86: Get rid of Makefile.postlink
kbuild: Create intermediate vmlinux build with relocations preserved
kbuild: Introduce Kconfig symbol for linking vmlinux with relocations
kbuild: link-vmlinux.sh: Make output file name configurable
kbuild: do not generate .tmp_vmlinux*.map when CONFIG_VMLINUX_MAP=y
Revert "kheaders: Ignore silly-rename files"
...
The function hrtimer_init() doesn't exist anymore. It was replaced by
hrtimer_setup().
Thus, rename the hrtimer_init trace event to hrtimer_setup to keep it
consistent.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/cba84c3d853c5258aa3a262363a6eac08e2c7afc.1738746927.git.namcao@linutronix.de
All the hrtimer_init*() functions have been renamed to hrtimer_setup*().
Rename debug_init_on_stack() to debug_setup_on_stack() as well, to keep the
names consistent.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/073cf6162779a2f5b12624677d4c49ee7eccc1ed.1738746927.git.namcao@linutronix.de
All the hrtimer_init*() functions have been renamed to hrtimer_setup*().
Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper() as well, to
keep the names consistent.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/807694aedad9353421c4a7347629a30c5c31026f.1738746927.git.namcao@linutronix.de
The struct hrtimer::function field can only be changed using
hrtimer_setup*() or hrtimer_update_function(), and both already null-check
'function'. Therefore, null-checking 'function' in hrtimer_start_range_ns()
is not necessary.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/4661c571ee87980c340ccc318fc1a473c0c8f6bc.1738746927.git.namcao@linutronix.de
Make the struct hrtimer::function field private, to prevent users from
changing this field in an unsafe way. hrtimer_update_function() should be
used if the callback function needs to be changed.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/7d0e6e0c5c59a64a9bea940051aac05d750bc0c2.1738746927.git.namcao@linutronix.de
__hrtimer_init_sleeper() calls __hrtimer_init() and also sets up the
callback function. But there is already __hrtimer_setup() which does both
actions.
Switch to use __hrtimer_setup() to simplify the code.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/d9a45a51b6a8aa0045310d63f73753bf6b33f385.1738746927.git.namcao@linutronix.de
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The tag "ops" is used for two different purposes. First, to indicate that
the entity is directly related to the operations such as flags carried in
sched_ext_ops. Second, to indicate that the entity applies to something
global such as enable or bypass states. The second usage is historical and
causes confusion rather than clarifying anything. For example,
scx_ops_enable_state enums are named SCX_OPS_* and thus conflict with
scx_ops_flags. Let's drop the second usages.
Drop "ops" from SCX_OPS_TASK_ITER_BATCH.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-and-acked-by: Andrea Righi <arighi@nvidia.com>
This non-functional change serves as preparation for moving to
subsystem-based rstat trees. To simplify future commits, change the
signatures of existing cgroup-based rstat functions to become css-based and
rename them to reflect that.
Though the signatures have changed, the implementations have not. Within
these functions use the css->cgroup pointer to obtain the associated cgroup
and allow code to function the same just as it did before this patch. At
applicable call sites, pass the subsystem-specific css pointer as an
argument or pass a pointer to cgroup::self if not in subsystem context.
Note that cgroup_rstat_updated_list() and cgroup_rstat_push_children()
are not altered yet since there would be a larger amount of css to
cgroup conversions which may overcomplicate the code at this
intermediate phase.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The cgroup struct has a css field called "self". The main difference
between this css and the others found in the cgroup::subsys array is that
cgroup::self has a NULL subsystem pointer. There are several places where
checks are performed to determine whether the css in question is
cgroup::self or not. Instead of accessing css->ss directly, introduce a
helper function that shows the intent and use where applicable.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This non-functional change serves as preparation for moving to
subsystem-based rstat trees. The base stats are not an actual subsystem,
but in future commits they will have exclusive rstat trees just as other
subsystems will.
Moving the base stat objects into a new struct allows the cgroup_rstat_cpu
struct to become more compact since it now only contains the minimum amount
of pointers needed for rstat participation. Subsystems will (in future
commits) make use of the compact cgroup_rstat_cpu struct while avoiding the
memory overhead of the base stat objects which they will not use.
An instance of the new struct cgroup_rstat_base_cpu was placed on the
cgroup struct so it can retain ownership of these base stats common to all
cgroups. A helper function was added for looking up the cpu-specific base
stats of a given cgroup. Finally, initialization and variable names were
adjusted where applicable.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The tag "ops" is used for two different purposes. First, to indicate that
the entity is directly related to the operations such as flags carried in
sched_ext_ops. Second, to indicate that the entity applies to something
global such as enable or bypass states. The second usage is historical and
causes confusion rather than clarifying anything. For example,
scx_ops_enable_state enums are named SCX_OPS_* and thus conflict with
scx_ops_flags. Let's drop the second usages.
Drop "ops" from scx_ops_{init|exit|enable|disable}[_task]() and friends.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
The tag "ops" is used for two different purposes. First, to indicate that
the entity is directly related to the operations such as flags carried in
sched_ext_ops. Second, to indicate that the entity applies to something
global such as enable or bypass states. The second usage is historical and
causes confusion rather than clarifying anything. For example,
scx_ops_enable_state enums are named SCX_OPS_* and thus conflict with
scx_ops_flags. Let's drop the second usages.
Drop "ops" from scx_ops_exit(), scx_ops_error() and friends.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
The tag "ops" is used for two different purposes. First, to indicate that
the entity is directly related to the operations such as flags carried in
sched_ext_ops. Second, to indicate that the entity applies to something
global such as enable or bypass states. The second usage is historical and
causes confusion rather than clarifying anything. For example,
scx_ops_enable_state enums are named SCX_OPS_* and thus conflict with
scx_ops_flags. Let's drop the second usages.
Drop "ops" from scx_ops_bypass(), scx_ops_breather() and friends. Update
scx_show_state.py accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
The tag "ops" is used for two different purposes. First, to indicate that
the entity is directly related to the operations such as flags carried in
sched_ext_ops. Second, to indicate that the entity applies to something
global such as enable or bypass states. The second usage is historical and
causes confusion rather than clarifying anything. For example,
scx_ops_enable_state enums are named SCX_OPS_* and thus conflict with
scx_ops_flags. Let's drop the second usages.
Drop "ops" from scx_ops_helper, scx_ops_enable_mutex and __scx_ops_enabled.
Update scx_show_state.py accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
The tag "ops" is used for two different purposes. First, to indicate that
the entity is directly related to the operations such as flags carried in
sched_ext_ops. Second, to indicate that the entity applies to something
global such as enable or bypass states. The second usage is historical and
causes confusion rather than clarifying anything. For example,
scx_ops_enable_state enums are named SCX_OPS_* and thus conflict with
scx_ops_flags. Let's drop the second usages.
Drop "ops" from scx_ops_enable_state and friends. Update scx_show_state.py
accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
This reverts commit 757b000f7b.
Miroslav reported that the changes for handling the inconsistencies in the
coarse time getters result in a regression on the adjtimex() side.
There are two issues:
1) The forwarding of the base time moves the update out of the original
period and establishes a new one.
2) The clearing of the accumulated NTP error is changing the behaviour as
well.
Userspace expects that multiplier/frequency updates are in effect, when the
syscall returns, so delaying the update to the next tick is not solving the
problem either.
Revert the change, so that the established expectations of user space
implementations (ntpd, chronyd) are restored. The re-introduced
inconsistency of the coarse time getters will be addressed in a subsequent
fix.
Fixes: 757b000f7b ("timekeeping: Fix possible inconsistencies in _COARSE clockids")
Reported-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/Z-qsg6iDGlcIJulJ@localhost
Frank reported, that the common irq_force_complete_move() breaks the out of
tree build of ia64. The reason is that ia64 uses the migration code, but
does not have hierarchical interrupt domains enabled.
This went unnoticed in mainline as both x86 and RISC-V have hierarchical
domains enabled. Not that it matters for mainline, but it's still
inconsistent.
Use irqd_get_parent_data() instead of accessing the parent_data field
directly. The helper returns NULL when hierarchical domains are disabled
otherwise it accesses the parent_data field of the domain.
No functional change.
Fixes: 751dc837da ("genirq: Introduce common irq_force_complete_move() implementation")
Reported-by: Frank Scheiner <frank.scheiner@web.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Frank Scheiner <frank.scheiner@web.de>
Link: https://lore.kernel.org/all/87h634ugig.ffs@tglx
Naming interrupt domains host is confusing at best and the irqdomain code
uses both domain and host inconsistently.
Therefore rename irq_get_default_host() to irq_get_default_domain().
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-4-jirislaby@kernel.org
Naming interrupt domains host is confusing at best and the irqdomain code
uses both domain and host inconsistently.
Therefore rename irq_set_default_host() to irq_set_default_domain().
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-3-jirislaby@kernel.org
It is useful to be able to access current->mm at task exit to, say,
record a bunch of VMA information right before the task exits (e.g., for
stack symbolization reasons when dealing with short-lived processes that
exit in the middle of profiling session). Currently,
trace_sched_process_exit() is triggered after exit_mm() which resets
current->mm to NULL making this tracepoint unsuitable for inspecting
and recording task's mm_struct-related data when tracing process
lifetimes.
There is a particularly suitable place, though, right after
taskstats_exit() is called, but before we do exit_mm() and other
exit_*() resource teardowns. taskstats performs a similar kind of
accounting that some applications do with BPF, and so co-locating them
seems like a good fit. So that's where trace_sched_process_exit() is
moved with this patch.
Also, existing trace_sched_process_exit() tracepoint is notoriously
missing `group_dead` flag that is certainly useful in practice and some
of our production applications have to work around this. So plumb
`group_dead` through while at it, to have a richer and more complete
tracepoint.
Note that we can't use sched_process_template anymore, and so we use
TRACE_EVENT()-based tracepoint definition. But all the field names and
order, as well as assign and output logic remain intact. We just add one
extra field at the end in backwards-compatible way.
Document the dependency to sched_process_template anyway.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250402180925.90914-1-andrii@kernel.org
It was mistaken that the physical memory returned from "reserve_mem" had to
be vmap()'d to get to it from a virtual address. But reserve_mem already
maps the memory to the virtual address of the kernel so a simple
phys_to_virt() can be used to get to the virtual address from the physical
memory returned by "reserve_mem". With this new found knowledge, the
code can be cleaned up and simplified.
- Enforce that the persistent memory is page aligned
As the buffers using the persistent memory are all going to be
mapped via pages, make sure that the memory given to the tracing
infrastructure is page aligned. If it is not, it will print a warning
and fail to map the buffer.
- Use phys_to_virt() to get the virtual address from reserve_mem
Instead of calling vmap() on the physical memory returned from
"reserve_mem", use phys_to_virt() instead.
As the memory returned by "memmap" or any other means where a physical
address is given to the tracing infrastructure, it still needs to
be vmap(). Since this memory can never be returned back to the buddy
allocator nor should it ever be memmory mapped to user space, flag
this buffer and up the ref count. The ref count will keep it from
ever being freed, and the flag will prevent it from ever being memory
mapped to user space.
- Use vmap_page_range() for memmap virtual address mapping
For the memmap buffer, instead of allocating an array of struct pages,
assigning them to the contiguous phsycial memory and then passing that to
vmap(), use vmap_page_range() instead
- Replace flush_dcache_folio() with flush_kernel_vmap_range()
Instead of calling virt_to_folio() and passing that to
flush_dcache_folio(), just call flush_kernel_vmap_range() directly.
This also fixes a bug where if a subbuffer was bigger than PAGE_SIZE
only the PAGE_SIZE portion would be flushed.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ+6oZRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhq6AP481KHAgaowQCg7zrKPkMlbYBIigYoU
7aqoAg2rSLBRSQEAl8fViHZgZ9Q+O7xdozQWiIR7/KQW8VIaTcP/V7cHkAU=
=+5JB
-----END PGP SIGNATURE-----
Merge tag 'trace-ringbuffer-v6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer updates from Steven Rostedt:
"Persistent buffer cleanups and simplifications.
It was mistaken that the physical memory returned from "reserve_mem"
had to be vmap()'d to get to it from a virtual address. But
reserve_mem already maps the memory to the virtual address of the
kernel so a simple phys_to_virt() can be used to get to the virtual
address from the physical memory returned by "reserve_mem". With this
new found knowledge, the code can be cleaned up and simplified.
- Enforce that the persistent memory is page aligned
As the buffers using the persistent memory are all going to be
mapped via pages, make sure that the memory given to the tracing
infrastructure is page aligned. If it is not, it will print a
warning and fail to map the buffer.
- Use phys_to_virt() to get the virtual address from reserve_mem
Instead of calling vmap() on the physical memory returned from
"reserve_mem", use phys_to_virt() instead.
As the memory returned by "memmap" or any other means where a
physical address is given to the tracing infrastructure, it still
needs to be vmap(). Since this memory can never be returned back to
the buddy allocator nor should it ever be memmory mapped to user
space, flag this buffer and up the ref count. The ref count will
keep it from ever being freed, and the flag will prevent it from
ever being memory mapped to user space.
- Use vmap_page_range() for memmap virtual address mapping
For the memmap buffer, instead of allocating an array of struct
pages, assigning them to the contiguous phsycial memory and then
passing that to vmap(), use vmap_page_range() instead
- Replace flush_dcache_folio() with flush_kernel_vmap_range()
Instead of calling virt_to_folio() and passing that to
flush_dcache_folio(), just call flush_kernel_vmap_range() directly.
This also fixes a bug where if a subbuffer was bigger than
PAGE_SIZE only the PAGE_SIZE portion would be flushed"
* tag 'trace-ringbuffer-v6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Use flush_kernel_vmap_range() over flush_dcache_folio()
tracing: Use vmap_page_range() to map memmap ring buffer
tracing: Have reserve_mem use phys_to_virt() and separate from memmap buffer
tracing: Enforce the persistent ring buffer to be page aligned
from Mike Rapoport fixes a couple of issues with the just-merged "arch,
mm: reduce code duplication in mem_init()" series.
- The 4 patch series "MAINTAINERS: add my isub-entries to MM part." from
Mike Rapoport does some maintenance on MAINTAINERS.
- The 6 patch series "remove tlb_remove_page_ptdesc()" from Qi Zheng
does some cleanup work to the page mapping code.
- The 7 patch series "mseal system mappings" from Jeff Xu permits
sealing of "system mappings", such as vdso, vvar, vvar_vclock, vectors
(arm compat-mode), sigpage (arm compat-mode).
- Plus the usual shower of singleton patches.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+4XpgAKCRDdBJ7gKXxA
jnwtAP43Rp3zyWf034fEypea36xQqcsy4I7YUTdZEgnFS7LCZwEApM97JvGHsYEr
Ns9Zhnh+E3RWASfOAzJoVZVrAaMovg4=
=MyVR
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-04-02-22-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- The series "mm: fixes for fallouts from mem_init() cleanup" from Mike
Rapoport fixes a couple of issues with the just-merged "arch, mm:
reduce code duplication in mem_init()" series
- The series "MAINTAINERS: add my isub-entries to MM part." from Mike
Rapoport does some maintenance on MAINTAINERS
- The series "remove tlb_remove_page_ptdesc()" from Qi Zheng does some
cleanup work to the page mapping code
- The series "mseal system mappings" from Jeff Xu permits sealing of
"system mappings", such as vdso, vvar, vvar_vclock, vectors (arm
compat-mode), sigpage (arm compat-mode)
- Plus the usual shower of singleton patches
* tag 'mm-stable-2025-04-02-22-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
mseal sysmap: add arch-support txt
mseal sysmap: enable s390
selftest: test system mappings are sealed
mseal sysmap: update mseal.rst
mseal sysmap: uprobe mapping
mseal sysmap: enable arm64
mseal sysmap: enable x86-64
mseal sysmap: generic vdso vvar mapping
selftests: x86: test_mremap_vdso: skip if vdso is msealed
mseal sysmap: kernel config and header change
mm: pgtable: remove tlb_remove_page_ptdesc()
x86: pgtable: convert to use tlb_remove_ptdesc()
riscv: pgtable: unconditionally use tlb_remove_ptdesc()
mm: pgtable: convert some architectures to use tlb_remove_ptdesc()
mm: pgtable: change pt parameter of tlb_remove_ptdesc() to struct ptdesc*
mm: pgtable: make generic tlb_remove_table() use struct ptdesc
microblaze/mm: put mm_cmdline_setup() in .init.text section
mm/memory_hotplug: fix call folio_test_large with tail page in do_migrate_range
MAINTAINERS: mm: add entry for secretmem
MAINTAINERS: mm: add entry for numa memblocks and numa emulation
...
- Calling scx_bpf_create_dsq() with the same ID would succeed creating
duplicate DSQs. Fix it to return -EEXIST.
- scx_select_cpu_dfl() fixes and cleanups.
- Synchronize tool/sched_ext with external scheduler repo. While this isn't
a fix. There's no risk to the kernel and it's better if they stay synced
closer.
-----BEGIN PGP SIGNATURE-----
iIMEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZ+29Eg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGeNGAP97GCCCwovepx3f9HV3RRk8oEregsGI7gmr+TC5
+XJrqwD4urg6I5JGM3K5dB9m626RyUP6k5RmYdjqBrEL6LauCg==
=uWzD
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-6.15-rc0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Calling scx_bpf_create_dsq() with the same ID would succeed creating
duplicate DSQs. Fix it to return -EEXIST.
- scx_select_cpu_dfl() fixes and cleanups.
- Synchronize tool/sched_ext with external scheduler repo. While this
isn't a fix. There's no risk to the kernel and it's better if they
stay synced closer.
* tag 'sched_ext-for-6.15-rc0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
tools/sched_ext: Sync with scx repo
sched_ext: initialize built-in idle state before ops.init()
sched_ext: create_dsq: Return -EEXIST on duplicate request
sched_ext: Remove a meaningless conditional goto in scx_select_cpu_dfl()
sched_ext: idle: Fix return code of scx_select_cpu_dfl()
- Fix build error when CONFIG_PROBE_EVENTS_BTF_ARGS is not enabled
The tracing of arguments in the function tracer depends on some
functions that are only defined when PROBE_EVENTS_BTF_ARGS is enabled.
In fact, PROBE_EVENTS_BTF_ARGS also depends on all the same configs
as the function argument tracing requires. Just have the function
argument tracing depend on PROBE_EVENTS_BTF_ARGS.
- Free module_delta for persistent ring buffer instance
When an instance holds the persistent ring buffer, it allocates
a helper array to hold the deltas between where modules are loaded
on the last boot and the current boot. This array needs to be freed
when the instance is freed.
- Add cond_resched() to loop in ftrace_graph_set_hash()
The hash functions in ftrace loop over every function that can be
enabled by ftrace. This can be 50,000 functions or more. This
loop is known to trigger soft lockup warnings and requires a
cond_resched(). The loop in ftrace_graph_set_hash() was missing it.
- Fix the event format verifier to include "%*p.." arguments
To prevent events from dereferencing stale pointers that can
happen if a trace event uses a dereferece pointer to something
that was not copied into the ring buffer and can be freed by the
time the trace is read, a verifier is called. At boot or module
load, the verifier scans the print format string for pointers
that can be dereferenced and it checks the arguments to make sure
they do not contain something that can be freed. The "%*p" was
not handled, which would add another argument and cause the verifier
to not only not verify this pointer, but it will look at the wrong
argument for every pointer after that.
- Fix mcount sorttable building for different endian type target
When modifying the ELF file to sort the mcount_loc table in the
sorttable.c code, the endianess of the file and the host is used
to determine if the bytes need to be swapped when calculations are
done. A change was made to the sorting of the mcount_loc that read
the values from the ELF file into an array and the swap happened
on the filling of the array. But one of the calculations of the
array still did the swap when it did not need to. This caused building
on a little endian machine for a big endian target to not find
the mcount function in the 'nm' table and it zeroed it out, causing
there to be no functions available to trace.
- Add goto out_unlock jump to rv_register_monitor() on error path
One of the error paths in rv_register_monitor() just returned the
error when it should have jumped to the out_unlock label to release
the mutex.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ+2tyBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qjPYAPwJDti6nHTqheFwIa1WzJ3yC2tKRYKt
1E5PYW/2Ct5NmwEAqgg3TvJppXHymVdutLghhGFnlBnyTWMI+KIhparSBw8=
=NFM5
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix build error when CONFIG_PROBE_EVENTS_BTF_ARGS is not enabled
The tracing of arguments in the function tracer depends on some
functions that are only defined when PROBE_EVENTS_BTF_ARGS is
enabled. In fact, PROBE_EVENTS_BTF_ARGS also depends on all the same
configs as the function argument tracing requires. Just have the
function argument tracing depend on PROBE_EVENTS_BTF_ARGS.
- Free module_delta for persistent ring buffer instance
When an instance holds the persistent ring buffer, it allocates a
helper array to hold the deltas between where modules are loaded on
the last boot and the current boot. This array needs to be freed when
the instance is freed.
- Add cond_resched() to loop in ftrace_graph_set_hash()
The hash functions in ftrace loop over every function that can be
enabled by ftrace. This can be 50,000 functions or more. This loop is
known to trigger soft lockup warnings and requires a cond_resched().
The loop in ftrace_graph_set_hash() was missing it.
- Fix the event format verifier to include "%*p.." arguments
To prevent events from dereferencing stale pointers that can happen
if a trace event uses a dereferece pointer to something that was not
copied into the ring buffer and can be freed by the time the trace is
read, a verifier is called. At boot or module load, the verifier
scans the print format string for pointers that can be dereferenced
and it checks the arguments to make sure they do not contain
something that can be freed. The "%*p" was not handled, which would
add another argument and cause the verifier to not only not verify
this pointer, but it will look at the wrong argument for every
pointer after that.
- Fix mcount sorttable building for different endian type target
When modifying the ELF file to sort the mcount_loc table in the
sorttable.c code, the endianess of the file and the host is used to
determine if the bytes need to be swapped when calculations are done.
A change was made to the sorting of the mcount_loc that read the
values from the ELF file into an array and the swap happened on the
filling of the array. But one of the calculations of the array still
did the swap when it did not need to. This caused building on a
little endian machine for a big endian target to not find the mcount
function in the 'nm' table and it zeroed it out, causing there to be
no functions available to trace.
- Add goto out_unlock jump to rv_register_monitor() on error path
One of the error paths in rv_register_monitor() just returned the
error when it should have jumped to the out_unlock label to release
the mutex.
* tag 'trace-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix missing unlock on double nested monitors return path
scripts/sorttable: Fix endianness handling in build-time mcount sort
tracing: Verify event formats that have "%*p.."
ftrace: Add cond_resched() to ftrace_graph_set_hash()
tracing: Free module_delta on freeing of persistent ring buffer
ftrace: Have tracing function args depend on PROBE_EVENTS_BTF_ARGS
Eliminate a useless task_work on execve by moving the call to
rseq_set_notify_resume() from sched_mm_cid_after_execve() to the error
path of bprm_execve().
The call to rseq_set_notify_resume() from sched_mm_cid_after_execve() is
pointless in the success case, because rseq_execve() will clear the rseq
pointer before returning to userspace.
sched_mm_cid_after_execve() is called from both the success and error
paths of bprm_execve(). The call to rseq_set_notify_resume() is needed
on error because the mm_cid may have changed.
Also move the rseq_execve() to right after sched_mm_cid_after_execve()
in bprm_execve().
[ mingo: Merged to a recent upstream kernel, extended the changelog. ]
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250327132945.1558783-1-mathieu.desnoyers@efficios.com
Here is the big set of serial and tty driver updates for 6.15-rc1.
Include in here are the following:
- more great tty layer cleanups from Jiri. Someday this will be done,
but that's not going to be any year soon...
- kdb debug driver reverts to fix a reported issue
- lots of .dts binding updates for different devices with serial
devices
- lots of tiny updates and tweaks and a few bugfixes for different
serial drivers.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+2YPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn2OQCgvxCyoeuNPuV4X89JdrgocMTMyTYAn15pGgDa
r7w9UDO/D7UqRnKEnFy+
=lJwK
-----END PGP SIGNATURE-----
Merge tag 'tty-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of serial and tty driver updates for 6.15-rc1.
Include in here are the following:
- more great tty layer cleanups from Jiri. Someday this will be done,
but that's not going to be any year soon...
- kdb debug driver reverts to fix a reported issue
- lots of .dts binding updates for different devices with serial
devices
- lots of tiny updates and tweaks and a few bugfixes for different
serial drivers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
tty: serial: fsl_lpuart: Fix unused variable 'sport' build warning
serial: stm32: do not deassert RS485 RTS GPIO prematurely
serial: 8250: add driver for NI UARTs
dt-bindings: serial: snps-dw-apb-uart: document RZ/N1 binding without DMA
serial: icom: fix code format problems
serial: sh-sci: Save and restore more registers
tty: serial: pl011: remove incorrect of_match_ptr annotation
dt-bindings: serial: snps-dw-apb-uart: Add support for rk3562
tty: serial: lpuart: only disable CTS instead of overwriting the whole UARTMODIR register
tty: caif: removed unused function debugfs_tx()
serial: 8250_dma: terminate correct DMA in tx_dma_flush()
tty: serial: fsl_lpuart: rename register variables more specifically
tty: serial: fsl_lpuart: use port struct directly to simply code
tty: serial: fsl_lpuart: Use u32 and u8 for register variables
tty: serial: fsl_lpuart: disable transmitter before changing RS485 related registers
tty: serial: 8250: Add Brainboxes XC devices
dt-bindings: serial: fsl-lpuart: support i.MX94
tty: serial: 8250: Add some more device IDs
dt-bindings: serial: samsung: add exynos7870-uart compatible
serial: 8250_dw: Comment possible corner cases in serial_out() implementation
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ+1ZqAAKCRCRxhvAZXjc
oqO7AP4jdW03PHsk5zkbuUTzTTngkZQ1AypIJLTCYIoKPATMowD+ILMjOTsVOfxA
h38ziAM3tubsz1pwkGuIlsU+drwz5Ao=
=QfJV
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.15-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Add a new maintainer for configfs
- Fix exportfs module description
- Place flexible array memeber at the end of an internal struct in the
mount code
- Add new maintainer for netfslib as Jeff Layton is stepping down as
current co-maintainer
- Fix error handling in cachefiles_get_directory()
- Cleanup do_notify_pidfd()
- Fix syscall number definitions in pidfd selftests
- Fix racy usage of fs_struct->in exec during multi-threaded exec
- Ensure correct exit code is reported when pidfs_exit() is called from
release_task() for a delayed thread-group leader exit
- Fix conflicting iomap flag definitions
* tag 'vfs-6.15-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: Fix conflicting values of iomap flags
fs: namespace: Avoid -Wflex-array-member-not-at-end warning
MAINTAINERS: configfs: add Andreas Hindborg as maintainer
exportfs: add module description
exit: fix the usage of delay_group_leader->exit_code in do_notify_parent() and pidfs_exit()
netfs: add Paulo as maintainer and remove myself as Reviewer
cachefiles: Fix oops in vfs_mkdir from cachefiles_get_directory
exec: fix the racy usage of fs_struct->in_exec
selftests/pidfd: fixes syscall number defines
pidfs: cleanup the usage of do_notify_pidfd()
around the fallout from the new CONFIG_OBJTOOL_WERROR=y feature,
which, despite its default-off nature, increased the profile/impact
of objtool warnings:
- Improve error handling and the presentation of warnings/errors.
- Revert the new summary warning line that some test-bot tools
interpreted as new regressions.
- Fix a number of objtool warnings in various drivers, core kernel
code and architecture code. About half of them are potential
problems related to out-of-bounds accesses or potential undefined
behavior, the other half are additional objtool annotations.
- Update objtool to latest (known) compiler quirks and
objtool bugs triggered by compiler code generation
- Misc fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KkiI
-----END PGP SIGNATURE-----
Merge tag 'objtool-urgent-2025-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"These are objtool fixes and updates by Josh Poimboeuf, centered around
the fallout from the new CONFIG_OBJTOOL_WERROR=y feature, which,
despite its default-off nature, increased the profile/impact of
objtool warnings:
- Improve error handling and the presentation of warnings/errors
- Revert the new summary warning line that some test-bot tools
interpreted as new regressions
- Fix a number of objtool warnings in various drivers, core kernel
code and architecture code. About half of them are potential
problems related to out-of-bounds accesses or potential undefined
behavior, the other half are additional objtool annotations
- Update objtool to latest (known) compiler quirks and objtool bugs
triggered by compiler code generation
- Misc fixes"
* tag 'objtool-urgent-2025-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
objtool/loongarch: Add unwind hints in prepare_frametrace()
rcu-tasks: Always inline rcu_irq_work_resched()
context_tracking: Always inline ct_{nmi,irq}_{enter,exit}()
sched/smt: Always inline sched_smt_active()
objtool: Fix verbose disassembly if CROSS_COMPILE isn't set
objtool: Change "warning:" to "error: " for fatal errors
objtool: Always fail on fatal errors
Revert "objtool: Increase per-function WARN_FUNC() rate limit"
objtool: Append "()" to function name in "unexpected end of section" warning
objtool: Ignore end-of-section jumps for KCOV/GCOV
objtool: Silence more KCOV warnings, part 2
objtool, drm/vmwgfx: Don't ignore vmw_send_msg() for ORC
objtool: Fix STACK_FRAME_NON_STANDARD for cold subfunctions
objtool: Fix segfault in ignore_unreachable_insn()
objtool: Fix NULL printf() '%s' argument in builtin-check.c:save_argv()
objtool, lkdtm: Obfuscate the do_nothing() pointer
objtool, regulator: rk808: Remove potential undefined behavior in rk806_set_mode_dcdc()
objtool, ASoC: codecs: wcd934x: Remove potential undefined behavior in wcd934x_slim_irq_handler()
objtool, Input: cyapa - Remove undefined behavior in cyapa_update_fw_store()
objtool, panic: Disable SMAP in __stack_chk_fail()
...
-----BEGIN PGP SIGNATURE-----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=Biv4
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull more printk updates from Petr Mladek:
- Silence warnings about candidates for ‘gnu_print’ format attribute
* tag 'printk-for-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
vsnprintf: Silence false positive GCC warning for va_format()
vsnprintf: Drop unused const char fmt * in va_format()
vsnprintf: Mark binary printing functions with __printf() attribute
tracing: Mark binary printing functions with __printf() attribute
seq_file: Mark binary printing functions with __printf() attribute
seq_buf: Mark binary printing functions with __printf() attribute
- srcu: Make FORCE_NEED_SRCU_NMI_SAFE depend on RCU_EXPERT
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEj5IosQTPz8XU1wRHSXnow7UH+rgFAmfs09kACgkQSXnow7UH
+rg+tQf/ehvjwWwijwLfaDRuVieLUQDEiTLNAsSmDDx9p/620lAm3PtIyi4XBT4d
tPH15uoqNaFF4fOwWouiIAbJTCgmzg6aOrg8U2Nc1KRGS7JdNUBMV+MxKYJncBYh
NNcw97n/HGMvi2BWLFj1xdOlSEMITX5xRZArp7c/PVRCau7DDC2lj2Ht47zYPOY3
echRbQzozLiFCuHseGEiEpVfa00lq0Pg1UyWC+5cXCLVKhv6XlV1kMrsVOWMpF39
g2CXT5QCTENnPHXBj1wCTG7hZMLVjnlcCE8+tMf92lwmc1zVM5L/T3GZLFzPBb42
mJE6UhaqiLJYctplnoygWu4xhgLI4A==
=MPwV
-----END PGP SIGNATURE-----
Merge tag 'rcu-fixes-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU fix from Boqun Feng:
- srcu: Make FORCE_NEED_SRCU_NMI_SAFE depend on RCU_EXPERT
* tag 'rcu-fixes-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux:
srcu: Make FORCE_NEED_SRCU_NMI_SAFE depend on RCU_EXPERT
Two clean ups this cycle. The larger of which is the removal of a private
allocator within kdb and replacing it with regular memory allocation. The
other adopts the simplified version of strscpy() in a couple of places in
kdb.
Signed-off-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
-----BEGIN PGP SIGNATURE-----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=mLdP
-----END PGP SIGNATURE-----
Merge tag 'kgdb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"Two cleanups this cycle. The larger of which is the removal of a
private allocator within kdb and replacing it with regular memory
allocation. The other adopts the simplified version of strscpy() in a
couple of places in kdb"
* tag 'kgdb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kdb: Remove optional size arguments from strscpy() calls
kdb: remove usage of static environment buffer
Some architectures do not have data cache coherency between user and
kernel space. For these architectures, the cache needs to be flushed on
both the kernel and user addresses so that user space can see the updates
the kernel has made.
Instead of using flush_dcache_folio() and playing with virt_to_folio()
within the call to that function, use flush_kernel_vmap_range() which
takes the virtual address and does the work for those architectures that
need it.
This also fixes a bug where the flush of the reader page only flushed one
page. If the sub-buffer order is 1 or more, where the sub-buffer size
would be greater than a page, it would miss the rest of the sub-buffer
content, as the "reader page" is not just a page, but the size of a
sub-buffer.
Link: https://lore.kernel.org/all/CAG48ez3w0my4Rwttbc5tEbNsme6tc0mrSN95thjXUFaJ3aQ6SA@mail.gmail.com/
Cc: stable@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/20250402144953.920792197@goodmis.org
Fixes: 117c39200d ("ring-buffer: Introducing ring-buffer mapping functions");
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The code to map the physical memory retrieved by memmap currently
allocates an array of pages to cover the physical memory and then calls
vmap() to map it to a virtual address. Instead of using this temporary
array of struct page descriptors, simply use vmap_page_range() that can
directly map the contiguous physical memory to a virtual address.
Link: https://lore.kernel.org/all/CAHk-=whUOfVucfJRt7E0AH+GV41ELmS4wJqxHDnui6Giddfkzw@mail.gmail.com/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/20250402144953.754618481@goodmis.org
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The reserve_mem kernel command line option may pass back a physical
address, but the memory is still part of the normal memory just like
using memblock_alloc() would be. This means that the physical memory
returned by the reserve_mem command line option can be converted directly
to virtual memory by simply using phys_to_virt().
When freeing the buffer there's no need to call vunmap() anymore as the
memory allocated by reserve_mem is freed by the call to
reserve_mem_release_by_name().
Because the persistent ring buffer can also be allocated via the memmap
option, which *is* different than normal memory as it cannot be added back
to the buddy system, it must be treated differently. It still needs to be
virtually mapped to have access to it. It also can not be freed nor can it
ever be memory mapped to user space.
Create a new trace_array flag called TRACE_ARRAY_FL_MEMMAP which gets set
if the buffer is created by the memmap option, and this will prevent the
buffer from being memory mapped by user space.
Also increment the ref count for memmap'ed buffers so that they can never
be freed.
Link: https://lore.kernel.org/all/Z-wFszhJ_9o4dc8O@kernel.org/
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/20250402144953.583750106@goodmis.org
Suggested-by: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Enforce that the address and the size of the memory used by the persistent
ring buffer is page aligned. Also update the documentation to reflect this
requirement.
Link: https://lore.kernel.org/all/CAHk-=whUOfVucfJRt7E0AH+GV41ELmS4wJqxHDnui6Giddfkzw@mail.gmail.com/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/20250402144953.412882844@goodmis.org
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Commit ac91052f0a ("tracing: tprobe-events: Fix leakage of module
refcount") moved try_module_get() from __find_tracepoint_module_cb()
to find_tracepoint() caller, but that introduced a possible UAF
because the module can be unloaded before try_module_get(). In this
case, the module object should be freed too. Thus, try_module_get()
does not only fail but may access to the freed object.
To avoid that, try_module_get() in __find_tracepoint_module_cb()
again.
Link: https://lore.kernel.org/all/174342990779.781946.9138388479067729366.stgit@devnote2/
Fixes: ac91052f0a ("tracing: tprobe-events: Fix leakage of module refcount")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
RV doesn't support nested monitors having children monitors themselves
and exits with the EINVAL code. However, it returns without unlocking
the rv_interface_lock.
Unlock the lock before returning from the initialisation function.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250402071351.19864-2-gmonaco@redhat.com
Fixes: cb85c660fc ("rv: Add option for nested monitors and include sched")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Closes: https://lore.kernel.org/r/202503310200.UBXGitB4-lkp@intel.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The trace event verifier checks the formats of trace events to make sure
that they do not point at memory that is not in the trace event itself or
in data that will never be freed. If an event references data that was
allocated when the event triggered and that same data is freed before the
event is read, then the kernel can crash by reading freed memory.
The verifier runs at boot up (or module load) and scans the print formats
of the events and checks their arguments to make sure that dereferenced
pointers are safe. If the format uses "%*p.." the verifier will ignore it,
and that could be dangerous. Cover this case as well.
Also add to the sample code a use case of "%*pbl".
Link: https://lore.kernel.org/all/bcba4d76-2c3f-4d11-baf0-02905db953dd@oracle.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 5013f454a3 ("tracing: Add check of trace event print fmts for dereferencing pointers")
Link: https://lore.kernel.org/20250327195311.2d89ec66@gandalf.local.home
Reported-by: Libo Chen <libo.chen@oracle.com>
Reviewed-by: Libo Chen <libo.chen@oracle.com>
Tested-by: Libo Chen <libo.chen@oracle.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the kernel contains a large number of functions that can be traced,
the loop in ftrace_graph_set_hash() may take a lot of time to execute.
This may trigger the softlockup watchdog.
Add cond_resched() within the loop to allow the kernel to remain
responsive even when processing a large number of functions.
This matches the cond_resched() that is used in other locations of the
code that iterates over all functions that can be traced.
Cc: stable@vger.kernel.org
Fixes: b9b0c831be ("ftrace: Convert graph filter to use hash tables")
Link: https://lore.kernel.org/tencent_3E06CE338692017B5809534B9C5C03DA7705@qq.com
Signed-off-by: zhoumin <teczm@foxmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If a persistent ring buffer is created, a "module_delta" array is also
allocated to hold the module deltas of loaded modules that match modules
in the scratch area. If this buffer gets freed, the module_delta array is
not freed and causes a memory leak.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250401124525.1f9ac02a@gandalf.local.home
Fixes: 35a380ddbc ("tracing: Show last module text symbols in the stacktrace")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The option PROBE_EVENTS_BTF_ARGS enables the functions
btf_find_func_proto() and btf_get_func_param() which are used by the
function argument tracing code. The option FUNCTION_TRACE_ARGS was
dependent on the same configs that PROBE_EVENTS_BTF_ARGS was dependent on,
but it was also dependent on PROBE_EVENTS_BTF_ARGS. In fact, if
PROBE_EVENTS_BTF_ARGS is supported then FUNCTION_TRACE_ARGS is supported.
Just make FUNCTION_TRACE_ARGS depend on PROBE_EVENTS_BTF_ARGS.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/20250401113601.17fa1129@gandalf.local.home
Fixes: 533c20b062 ("ftrace: Add print_function_args()")
Closes: https://lore.kernel.org/all/DB9PR08MB75820599801BAD118D123D7D93AD2@DB9PR08MB7582.eurprd08.prod.outlook.com/
Reported-by: Christian Loehle <Christian.Loehle@arm.com>
Tested-by: Christian Loehle <Christian.Loehle@arm.com>
Tested-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There is a possible race between removing a cgroup diectory that is
a partition root and the creation of a new partition. The partition
to be removed can be dying but still online, it doesn't not currently
participate in checking for exclusive CPUs conflict, but the exclusive
CPUs are still there in subpartitions_cpus and isolated_cpus. These
two cpumasks are global states that affect the operation of cpuset
partitions. The exclusive CPUs in dying cpusets will only be removed
when cpuset_css_offline() function is called after an RCU delay.
As a result, it is possible that a new partition can be created with
exclusive CPUs that overlap with those of a dying one. When that dying
partition is finally offlined, it removes those overlapping exclusive
CPUs from subpartitions_cpus and maybe isolated_cpus resulting in an
incorrect CPU configuration.
This bug was found when a warning was triggered in
remote_partition_disable() during testing because the subpartitions_cpus
mask was empty.
One possible way to fix this is to iterate the dying cpusets as well and
avoid using the exclusive CPUs in those dying cpusets. However, this
can still cause random partition creation failures or other anomalies
due to racing. A better way to fix this race is to reset the partition
state at the moment when a cpuset is being killed.
Introduce a new css_killed() CSS function pointer and call it, if
defined, before setting CSS_DYING flag in kill_css(). Also update the
css_is_dying() helper to use the CSS_DYING flag introduced by commit
33c35aa481 ("cgroup: Prevent kill_css() from being called more than
once") for proper synchronization.
Add a new cpuset_css_killed() function to reset the partition state of
a valid partition root if it is being killed.
Fixes: ee8dde0cd2 ("cpuset: Add new v2 cpuset.sched.partition flag")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Provide support to mseal the uprobe mapping.
Unlike other system mappings, the uprobe mapping is not established during
program startup. However, its lifetime is the same as the process's
lifetime. It could be sealed from creation.
Test was done with perf tool, and observe the uprobe mapping is sealed.
Link: https://lkml.kernel.org/r/20250305021711.3867874-6-jeffxu@google.com
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Cc: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Anna-Maria Behnsen <anna-maria@linutronix.de>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Benjamin Berg <benjamin@sipsolutions.net>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Elliot Hughes <enh@google.com>
Cc: Florian Faineli <f.fainelli@gmail.com>
Cc: Greg Ungerer <gerg@kernel.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jason A. Donenfeld <jason@zx2c4.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Rapoport <mike.rapoport@gmail.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Stephen Röttger <sroettger@google.com>
Cc: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in 6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates.
This has been in linux-next for a while now, with the only reported
issue being some merge conflicts with the rust tree. Depending on which
tree you pull first, you will have conflicts in one of them. The merge
resolution has been in linux-next as an example of what to do, or can be
found here:
https://lore.kernel.org/r/CANiq72n3Xe8JcnEjirDhCwQgvWoE65dddWecXnfdnbrmuah-RQ@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+mMrg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRgwCdH58OE3BgL0uoFY5vFImStpmPtqUAoL5HpVWI
jtbJ+UuXGsnmO+JVNBEv
=gy6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
reservation" from Sourabh Jain changes powerpc's kexec code to use more
of the generic layers.
- The 2 patch series "get_maintainer: report subsystem status
separately" from Vlastimil Babka makes some long-requested improvements
to the get_maintainer output.
- The 4 patch series "ucount: Simplify refcounting with rcuref_t" from
Sebastian Siewior cleans up and optimizing the refcounting in the ucount
code.
- The 12 patch series "reboot: support runtime configuration of
emergency hw_protection action" from Ahmad Fatoum improves the ability
for a driver to perform an emergency system shutdown or reboot.
- The 16 patch series "Converge on using secs_to_jiffies() part two"
from Easwar Hariharan performs further migrations from
msecs_to_jiffies() to secs_to_jiffies().
- The 7 patch series "lib/interval_tree: add some test cases and
cleanup" from Wei Yang permits more userspace testing of kernel library
code, adds some more tests and performs some cleanups.
- The 2 patch series "hung_task: Dump the blocking task stacktrace" from
Masami Hiramatsu arranges for the hung_task detector to dump the stack
of the blocking task and not just that of the blocked task.
- The 4 patch series "resource: Split and use DEFINE_RES*() macros" from
Andy Shevchenko provides some cleanups to the resource definition
macros.
- Plus the usual shower of singleton patches - please see the individual
changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nuqwAKCRDdBJ7gKXxA
jtNqAQDxqJpjWkzn4yN9CNSs1ivVx3fr6SqazlYCrt3u89WQvwEA1oRrGpETzUGq
r6khQUIcQImPPcjFqEFpuiSOU0MBZA0=
=Kii8
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- The series "powerpc/crash: use generic crashkernel reservation" from
Sourabh Jain changes powerpc's kexec code to use more of the generic
layers.
- The series "get_maintainer: report subsystem status separately" from
Vlastimil Babka makes some long-requested improvements to the
get_maintainer output.
- The series "ucount: Simplify refcounting with rcuref_t" from
Sebastian Siewior cleans up and optimizing the refcounting in the
ucount code.
- The series "reboot: support runtime configuration of emergency
hw_protection action" from Ahmad Fatoum improves the ability for a
driver to perform an emergency system shutdown or reboot.
- The series "Converge on using secs_to_jiffies() part two" from Easwar
Hariharan performs further migrations from msecs_to_jiffies() to
secs_to_jiffies().
- The series "lib/interval_tree: add some test cases and cleanup" from
Wei Yang permits more userspace testing of kernel library code, adds
some more tests and performs some cleanups.
- The series "hung_task: Dump the blocking task stacktrace" from Masami
Hiramatsu arranges for the hung_task detector to dump the stack of
the blocking task and not just that of the blocked task.
- The series "resource: Split and use DEFINE_RES*() macros" from Andy
Shevchenko provides some cleanups to the resource definition macros.
- Plus the usual shower of singleton patches - please see the
individual changelogs for details.
* tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
mailmap: consolidate email addresses of Alexander Sverdlin
fs/procfs: fix the comment above proc_pid_wchan()
relay: use kasprintf() instead of fixed buffer formatting
resource: replace open coded variant of DEFINE_RES()
resource: replace open coded variants of DEFINE_RES_*_NAMED()
resource: replace open coded variant of DEFINE_RES_NAMED_DESC()
resource: split DEFINE_RES_NAMED_DESC() out of DEFINE_RES_NAMED()
samples: add hung_task detector mutex blocking sample
hung_task: show the blocker task if the task is hung on mutex
kexec_core: accept unaccepted kexec segments' destination addresses
watchdog/perf: optimize bytes copied and remove manual NUL-termination
lib/interval_tree: fix the comment of interval_tree_span_iter_next_gap()
lib/interval_tree: skip the check before go to the right subtree
lib/interval_tree: add test case for span iteration
lib/interval_tree: add test case for interval_tree_iter_xxx() helpers
lib/rbtree: add random seed
lib/rbtree: split tests
lib/rbtree: enable userland test suite for rbtree related data structure
checkpatch: describe --min-conf-desc-length
scripts/gdb/symbols: determine KASLR offset on s390
...
Uros Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was founf to be incorrect.
- The 4 patch series "Some cleanup for memcg" from Chen Ridong
implements some relatively monir cleanups for the memcontrol code.
- The 17 patch series "mm: fixes for device-exclusive entries (hmm)"
from David Hildenbrand fixes a boatload of issues which David found then
using device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now succeed.
- The 2 patch series "mm: zswap: remove z3fold and zbud" from Yosry
Ahmed remove the z3fold and zbud implementations. They have been
deprecated for half a year and nobody has complained.
- The 5 patch series "mm: further simplify VMA merge operation" from
Lorenzo Stoakes implements numerous simplifications in this area. No
runtime effects are anticipated.
- The 4 patch series "mm/madvise: remove redundant mmap_lock operations
from process_madvise()" from SeongJae Park rationalizes the locking in
the madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The 12 patch series "Tiny cleanup and improvements about SWAP code"
from Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The 2 patch series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak user-visible
output.
- The 2 patch series "mm/damon/paddr: fix large folios access and
schemes handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The 3 patch series "mm/damon/core: fix wrong and/or useless
damos_walk() behaviors" from SeongJae Park fixes a few issues with the
accuracy of kdamond's walking of DAMON regions.
- The 3 patch series "expose mapping wrprotect, fix fb_defio use" from
Lorenzo Stoakes changes the interaction between framebuffer deferred-io
and core MM. No functional changes are anticipated - this is
preparatory work for the future removal of page structure fields.
- The 4 patch series "mm/damon: add support for hugepage_size DAMOS
filter" from Usama Arif adds a DAMOS filter which permits the filtering
by huge page sizes.
- The 4 patch series "mm: permit guard regions for file-backed/shmem
mappings" from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The 4 patch series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping for
pte-mapped large folios.
- The 18 patch series "reimplement per-vma lock as a refcount" from
Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The 5 patch series "Docs/mm/damon: misc DAMOS filters documentation
fixes and improves" from SeongJae Park does some maintenance work on the
DAMON docs.
- The 27 patch series "hugetlb/CMA improvements for large systems" from
Frank van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The 2 patch series "mm/damon: introduce DAMOS filter type for unmapped
pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The 19 patch series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The 12 patch series "selftests/mm: Some cleanups from trying to run
them" from Brendan Jackman fixes a pile of unrelated issues which
Brendan encountered while runnimg our selftests.
- The 2 patch series "fs/proc/task_mmu: add guard region bit to pagemap"
from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The 7 patch series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply wasn't
being effective.
- The 5 patch series "mm: cleanups for device-exclusive entries (hmm)"
from David Hildenbrand implements a number of unrelated cleanups in this
code.
- The 5 patch series "mm: Rework generic PTDUMP configs" from Anshuman
Khandual implements a number of preparatoty cleanups to the
GENERIC_PTDUMP Kconfig logic.
- The 8 patch series "mm/damon: auto-tune aggregation interval" from
SeongJae Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The 5 patch series "Fix lazy mmu mode" from Ryan Roberts fixes some
issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did
this in preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The 2 patch series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the code
easier to follow.
- The 3 patch series "page_counter cleanup and size reduction" from
Shakeel Butt cleans up the page_counter code and fixes a size increase
which we accidentally added late last year.
- The 3 patch series "Add a command line option that enables control of
how many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The 3 patch series "Fix calculations in trace_balance_dirty_pages()
for cgwb" from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The 9 patch series "mm/damon: make allow filters after reject filters
useful and intuitive" from SeongJae Park improves the handling of allow
and reject filters. Behaviour is made more consistent and the
documention is updated accordingly.
- The 5 patch series "Switch zswap to object read/write APIs" from Yosry
Ahmed updates zswap to the new object read/write APIs and thus permits
the removal of some legacy code from zpool and zsmalloc.
- The 6 patch series "Some trivial cleanups for shmem" from Baolin Wang
does as it claims.
- The 20 patch series "fs/dax: Fix ZONE_DEVICE page reference counts"
from Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The 4 patch series "refactor mremap and fix bug" from Lorenzo Stoakes
is a preparatoty refactoring and cleanup of the mremap() code.
- The 20 patch series "mm: MM owner tracking for large folios (!hugetlb)
+ CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The 8 patch series "mm/damon: add sysfs dirs for managing DAMOS
filters based on handling layers" from SeongJae Park adds a couple of
new sysfs directories to ease the management of DAMON/DAMOS filters.
- The 13 patch series "arch, mm: reduce code duplication in mem_init()"
from Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The 13 patch series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The 3 patch series "mm: page_ext: Introduce new iteration API" from
Luiz Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The 8 patch series "Buddy allocator like (or non-uniform) folio split"
from Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios are
generated.
- The 2 patch series "Minimize xa_node allocation during xarry split"
from Zi Yan reduces the number of xarray xa_nodes which are generated
during an xarray split.
- The 2 patch series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The 3 patch series "Add tracepoints for lowmem reserves, watermarks
and totalreserve_pages" from Martin Liu adds some more tracepoints to
the page allocator code.
- The 4 patch series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which SeongJae
observed during his earlier madvise work.
- The 3 patch series "mm/hwpoison: Fix regressions in memory failure
handling" from Shuai Xue addresses two quite serious regressions which
Shuai has observed in the memory-failure implementation.
- The 5 patch series "mm: reliable huge page allocator" from Johannes
Weiner makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The 5 patch series "Minor memcg cleanups & prep for memdescs" from
Matthew Wilcox is preparatory work for the future implementation of
memdescs.
- The 4 patch series "track memory used by balloon drivers" from Nico
Pache introduces a way to track memory used by our various balloon
drivers.
- The 2 patch series "mm/damon: introduce DAMOS filter type for active
pages" from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The 2 patch series "Adding Proactive Memory Reclaim Statistics" from
Hao Jia separates the proactive reclaim statistics from the direct
reclaim statistics.
- The 2 patch series "mm/vmscan: don't try to reclaim hwpoison folio"
from Jinjiang Tu fixes our handling of hwpoisoned pages within the
reclaim code.
-----BEGIN PGP SIGNATURE-----
iHQEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nZaAAKCRDdBJ7gKXxA
jsOWAPiP4r7CJHMZRK4eyJOkvS1a1r+TsIarrFZtjwvf/GIfAQCEG+JDxVfUaUSF
Ee93qSSLR1BkNdDw+931Pu0mXfbnBw==
=Pn2K
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "Enable strict percpu address space checks" from Uros
Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was found to be incorrect.
- The series "Some cleanup for memcg" from Chen Ridong implements some
relatively monir cleanups for the memcontrol code.
- The series "mm: fixes for device-exclusive entries (hmm)" from David
Hildenbrand fixes a boatload of issues which David found then using
device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now
succeed.
- The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed
remove the z3fold and zbud implementations. They have been deprecated
for half a year and nobody has complained.
- The series "mm: further simplify VMA merge operation" from Lorenzo
Stoakes implements numerous simplifications in this area. No runtime
effects are anticipated.
- The series "mm/madvise: remove redundant mmap_lock operations from
process_madvise()" from SeongJae Park rationalizes the locking in the
madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The series "Tiny cleanup and improvements about SWAP code" from
Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak
user-visible output.
- The series "mm/damon/paddr: fix large folios access and schemes
handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The series "mm/damon/core: fix wrong and/or useless damos_walk()
behaviors" from SeongJae Park fixes a few issues with the accuracy of
kdamond's walking of DAMON regions.
- The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo
Stoakes changes the interaction between framebuffer deferred-io and
core MM. No functional changes are anticipated - this is preparatory
work for the future removal of page structure fields.
- The series "mm/damon: add support for hugepage_size DAMOS filter"
from Usama Arif adds a DAMOS filter which permits the filtering by
huge page sizes.
- The series "mm: permit guard regions for file-backed/shmem mappings"
from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping
for pte-mapped large folios.
- The series "reimplement per-vma lock as a refcount" from Suren
Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The series "Docs/mm/damon: misc DAMOS filters documentation fixes and
improves" from SeongJae Park does some maintenance work on the DAMON
docs.
- The series "hugetlb/CMA improvements for large systems" from Frank
van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The series "mm/damon: introduce DAMOS filter type for unmapped pages"
from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The series "selftests/mm: Some cleanups from trying to run them" from
Brendan Jackman fixes a pile of unrelated issues which Brendan
encountered while runnimg our selftests.
- The series "fs/proc/task_mmu: add guard region bit to pagemap" from
Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply
wasn't being effective.
- The series "mm: cleanups for device-exclusive entries (hmm)" from
David Hildenbrand implements a number of unrelated cleanups in this
code.
- The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual
implements a number of preparatoty cleanups to the GENERIC_PTDUMP
Kconfig logic.
- The series "mm/damon: auto-tune aggregation interval" from SeongJae
Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in
powerpc, sparc and x86 lazy MMU implementations. Ryan did this in
preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the
code easier to follow.
- The series "page_counter cleanup and size reduction" from Shakeel
Butt cleans up the page_counter code and fixes a size increase which
we accidentally added late last year.
- The series "Add a command line option that enables control of how
many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The series "Fix calculations in trace_balance_dirty_pages() for cgwb"
from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The series "mm/damon: make allow filters after reject filters useful
and intuitive" from SeongJae Park improves the handling of allow and
reject filters. Behaviour is made more consistent and the documention
is updated accordingly.
- The series "Switch zswap to object read/write APIs" from Yosry Ahmed
updates zswap to the new object read/write APIs and thus permits the
removal of some legacy code from zpool and zsmalloc.
- The series "Some trivial cleanups for shmem" from Baolin Wang does as
it claims.
- The series "fs/dax: Fix ZONE_DEVICE page reference counts" from
Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The series "refactor mremap and fix bug" from Lorenzo Stoakes is a
preparatoty refactoring and cleanup of the mremap() code.
- The series "mm: MM owner tracking for large folios (!hugetlb) +
CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The series "mm/damon: add sysfs dirs for managing DAMOS filters based
on handling layers" from SeongJae Park adds a couple of new sysfs
directories to ease the management of DAMON/DAMOS filters.
- The series "arch, mm: reduce code duplication in mem_init()" from
Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The series "mm: page_ext: Introduce new iteration API" from Luiz
Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The series "Buddy allocator like (or non-uniform) folio split" from
Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios
are generated.
- The series "Minimize xa_node allocation during xarry split" from Zi
Yan reduces the number of xarray xa_nodes which are generated during
an xarray split.
- The series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The series "Add tracepoints for lowmem reserves, watermarks and
totalreserve_pages" from Martin Liu adds some more tracepoints to the
page allocator code.
- The series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which
SeongJae observed during his earlier madvise work.
- The series "mm/hwpoison: Fix regressions in memory failure handling"
from Shuai Xue addresses two quite serious regressions which Shuai
has observed in the memory-failure implementation.
- The series "mm: reliable huge page allocator" from Johannes Weiner
makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The series "Minor memcg cleanups & prep for memdescs" from Matthew
Wilcox is preparatory work for the future implementation of memdescs.
- The series "track memory used by balloon drivers" from Nico Pache
introduces a way to track memory used by our various balloon drivers.
- The series "mm/damon: introduce DAMOS filter type for active pages"
from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia
separates the proactive reclaim statistics from the direct reclaim
statistics.
- The series "mm/vmscan: don't try to reclaim hwpoison folio" from
Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim
code.
* tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits)
mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex()
x86/mm: restore early initialization of high_memory for 32-bits
mm/vmscan: don't try to reclaim hwpoison folio
mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper
cgroup: docs: add pswpin and pswpout items in cgroup v2 doc
mm: vmscan: split proactive reclaim statistics from direct reclaim statistics
selftests/mm: speed up split_huge_page_test
selftests/mm: uffd-unit-tests support for hugepages > 2M
docs/mm/damon/design: document active DAMOS filter type
mm/damon: implement a new DAMOS filter type for active pages
fs/dax: don't disassociate zero page entries
MM documentation: add "Unaccepted" meminfo entry
selftests/mm: add commentary about 9pfs bugs
fork: use __vmalloc_node() for stack allocation
docs/mm: Physical Memory: Populate the "Zones" section
xen: balloon: update the NR_BALLOON_PAGES state
hv_balloon: update the NR_BALLOON_PAGES state
balloon_compaction: update the NR_BALLOON_PAGES state
meminfo: add a per node counter for balloon drivers
mm: remove references to folio in __memcg_kmem_uncharge_page()
...
The goto statement in sched_partition_write() is not needed. Remove
it and rename sched_partition_write()/sched_partition_show() to
cpuset_partition_write()/cpuset_partition_show().
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Rename partition_xcpus_newstate() to isolated_cpus_update(),
update_partition_exclusive() to update_partition_exclusive_flag() and
the new_xcpus_state variable to isolcpus_updated to make their meanings
more explicit. Also add some comments to further clarify the code.
No functional change is expected.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, we don't allow the creation of a remote partition underneath
another local or remote partition. However, it is currently possible to
create a new local partition with an existing remote partition underneath
it if top_cpuset is the parent. However, the current cpuset code does
not set the effective exclusive CPUs correctly to account for those
that are taken by the remote partition.
Changing the code to properly account for those remote partition CPUs
under all possible circumstances can be complex. It is much easier to
not allow such a configuration which is not that useful. So forbid
that by making sure that exclusive_cpus mask doesn't overlap with
subpartitions_cpus and invalidate the partition if that happens.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, changes in exclusive CPUs are being handled in
remote_partition_check() by disabling conflicting remote partitions.
However, that may lead to results unexpected by the users. Fix
this problem by removing remote_partition_check() and making
update_cpumasks_hier() handle changes in descendant remote partitions
properly.
The compute_effective_exclusive_cpumask() function is enhanced to check
the exclusive_cpus and effective_xcpus from siblings and excluded them
in its effective exclusive CPUs computation and return a value to show if
there is any sibling conflicts. This is somewhat like the cpu_exclusive
flag check in validate_change(). This is the initial step to enable us
to retire the use of cpu_exclusive flag in cgroup v2 in the future.
One of the tests in the TEST_MATRIX of the test_cpuset_prs.sh
script has to be updated due to changes in the way a child remote
partition root is being handled (updated instead of invalidation)
in update_cpumasks_hier().
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When remote_partition_disable() is called to disable a remote partition,
it always sets the partition to an invalid partition state. It should
only do so if an error code (prs_err) has been set. Correct that and
add proper error code in places where remote_partition_disable() is
called due to error.
Fixes: 181c8e091a ("cgroup/cpuset: Introduce remote partition")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Before commit f0af1bfc27 ("cgroup/cpuset: Relax constraints to
partition & cpus changes"), a cpuset partition cannot be enabled if not
all the requested CPUs can be granted from the parent cpuset. After
that commit, a cpuset partition can be created even if the requested
exclusive CPUs contain CPUs not allowed its parent. The delmask
containing exclusive CPUs to be removed from its parent wasn't
adjusted accordingly.
That is not a problem until the introduction of a new isolated_cpus
mask in commit 11e5f407b6 ("cgroup/cpuset: Keep track of CPUs in
isolated partitions") as the CPUs in the delmask may be added directly
into isolated_cpus.
As a result, isolated_cpus may incorrectly contain CPUs that are not
isolated leading to incorrect data reporting. Fix this by adjusting
the delmask to reflect the actual exclusive CPUs for the creation of
the partition.
Fixes: 11e5f407b6 ("cgroup/cpuset: Keep track of CPUs in isolated partitions")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
- Restructure the persistent memory to have a "scratch" area
Instead of hard coding the KASLR offset in the persistent memory
by the ring buffer, push that work up to the callers of the persistent
memory as they are the ones that need this information. The offsets
and such is not important to the ring buffer logic and it should
not be part of that.
A scratch pad is now created when the caller allocates a ring buffer
from persistent memory by stating how much memory it needs to save.
- Allow where modules are loaded to be saved in the new scratch pad
Save the addresses of modules when they are loaded into the persistent
memory scratch pad.
- A new module_for_each_mod() helper function was created
With the acknowledgement of the module maintainers a new module helper
function was created to iterate over all the currently loaded modules.
This has a callback to be called for each module. This is needed for
when tracing is started in the persistent buffer and the currently loaded
modules need to be saved in the scratch area.
- Expose the last boot information where the kernel and modules were loaded
The last_boot_info file is updated to print out the addresses of where
the kernel "_text" location was loaded from a previous boot, as well
as where the modules are loaded. If the buffer is recording the current
boot, it only prints "# Current" so that it does not expose the KASLR
offset of the currently running kernel.
- Allow the persistent ring buffer to be released (freed)
To have this in production environments, where the kernel command line can
not be changed easily, the ring buffer needs to be freed when it is not
going to be used. The memory for the buffer will always be allocated at
boot up, but if the system isn't going to enable tracing, the memory needs
to be freed. Allow it to be freed and added back to the kernel memory
pool.
- Allow stack traces to print the function names in the persistent buffer
Now that the modules are saved in the persistent ring buffer, if the same
modules are loaded, the printing of the function names will examine the
saved modules. If the module is found in the scratch area and is also
loaded, then it will do the offset shift and use kallsyms to display the
function name. If the address is not found, it simply displays the address
from the previous boot in hex.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ+cUERQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qrAsAQCFt2nfzxoe3wtF5EqIT1VHp/8bQVjG
gBe8B6ouboreogD/dS7yK8MRy24ZAmObGwYG0RbVicd50S7P8Rf7+823ng8=
=OJKk
-----END PGP SIGNATURE-----
Merge tag 'trace-ringbuffer-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer updates from Steven Rostedt:
- Restructure the persistent memory to have a "scratch" area
Instead of hard coding the KASLR offset in the persistent memory by
the ring buffer, push that work up to the callers of the persistent
memory as they are the ones that need this information. The offsets
and such is not important to the ring buffer logic and it should not
be part of that.
A scratch pad is now created when the caller allocates a ring buffer
from persistent memory by stating how much memory it needs to save.
- Allow where modules are loaded to be saved in the new scratch pad
Save the addresses of modules when they are loaded into the
persistent memory scratch pad.
- A new module_for_each_mod() helper function was created
With the acknowledgement of the module maintainers a new module
helper function was created to iterate over all the currently loaded
modules. This has a callback to be called for each module. This is
needed for when tracing is started in the persistent buffer and the
currently loaded modules need to be saved in the scratch area.
- Expose the last boot information where the kernel and modules were
loaded
The last_boot_info file is updated to print out the addresses of
where the kernel "_text" location was loaded from a previous boot, as
well as where the modules are loaded. If the buffer is recording the
current boot, it only prints "# Current" so that it does not expose
the KASLR offset of the currently running kernel.
- Allow the persistent ring buffer to be released (freed)
To have this in production environments, where the kernel command
line can not be changed easily, the ring buffer needs to be freed
when it is not going to be used. The memory for the buffer will
always be allocated at boot up, but if the system isn't going to
enable tracing, the memory needs to be freed. Allow it to be freed
and added back to the kernel memory pool.
- Allow stack traces to print the function names in the persistent
buffer
Now that the modules are saved in the persistent ring buffer, if the
same modules are loaded, the printing of the function names will
examine the saved modules. If the module is found in the scratch area
and is also loaded, then it will do the offset shift and use kallsyms
to display the function name. If the address is not found, it simply
displays the address from the previous boot in hex.
* tag 'trace-ringbuffer-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Use _text and the kernel offset in last_boot_info
tracing: Show last module text symbols in the stacktrace
ring-buffer: Remove the unused variable bmeta
tracing: Skip update_last_data() if cleared and remove active check for save_mod()
tracing: Initialize scratch_size to zero to prevent UB
tracing: Fix a compilation error without CONFIG_MODULES
tracing: Freeable reserved ring buffer
mm/memblock: Add reserved memory release function
tracing: Update modules to persistent instances when loaded
tracing: Show module names and addresses of last boot
tracing: Have persistent trace instances save module addresses
module: Add module_for_each_mod() function
tracing: Have persistent trace instances save KASLR offset
ring-buffer: Add ring_buffer_meta_scratch()
ring-buffer: Add buffer meta data for persistent ring buffer
ring-buffer: Use kaslr address instead of text delta
ring-buffer: Fix bytes_dropped calculation issue
The perf events code fails to account for total_time_enabled of
inactive events.
Here is a failure case for accounting total_time_enabled for
CPU PMU events:
sudo ./perf stat -vvv -e armv8_pmuv3_0/event=0x08/ -e armv8_pmuv3_1/event=0x08/ -- stress-ng --pthread=2 -t 2s
...
armv8_pmuv3_0/event=0x08/: 1138698008 2289429840 2174835740
armv8_pmuv3_1/event=0x08/: 1826791390 1950025700 847648440
` ` `
` ` > total_time_running with child
` > total_time_enabled with child
> count with child
Performance counter stats for 'stress-ng --pthread=2 -t 2s':
1,138,698,008 armv8_pmuv3_0/event=0x08/ (94.99%)
1,826,791,390 armv8_pmuv3_1/event=0x08/ (43.47%)
The two events above are opened on two different CPU PMUs, for example,
each event is opened for a cluster in an Arm big.LITTLE system, they
will never run on the same CPU. In theory, the total enabled time should
be same for both events, as two events are opened and closed together.
As the result show, the two events' total enabled time including
child event is different (2289429840 vs 1950025700).
This is because child events are not accounted properly
if a event is INACTIVE state when the task exits:
perf_event_exit_event()
`> perf_remove_from_context()
`> __perf_remove_from_context()
`> perf_child_detach() -> Accumulate child_total_time_enabled
`> list_del_event() -> Update child event's time
The problem is the time accumulation happens prior to child event's
time updating. Thus, it misses to account the last period's time when
the event exits.
The perf core layer follows the rule that timekeeping is tied to state
change. To address the issue, make __perf_remove_from_context()
handle the task exit case by passing 'DETACH_EXIT' to it and
invoke perf_event_state() for state alongside with accounting the time.
Then, perf_child_detach() populates the time into the parent's time metrics.
After this patch, the bug is fixed:
sudo ./perf stat -vvv -e armv8_pmuv3_0/event=0x08/ -e armv8_pmuv3_1/event=0x08/ -- stress-ng --pthread=2 -t 10s
...
armv8_pmuv3_0/event=0x08/: 15396770398 32157963940 21898169000
armv8_pmuv3_1/event=0x08/: 22428964974 32157963940 10259794940
Performance counter stats for 'stress-ng --pthread=2 -t 10s':
15,396,770,398 armv8_pmuv3_0/event=0x08/ (68.10%)
22,428,964,974 armv8_pmuv3_1/event=0x08/ (31.90%)
[ mingo: Clarified the changelog. ]
Fixes: ef54c1a476 ("perf: Rework perf_event_exit_event()")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20250326082003.1630986-1-yeoreum.yun@arm.com
- Use RCU instead of RCU-sched
The mix of rcu_read_lock(), rcu_read_lock_sched() and preempt_disable()
in the module code and its users has been replaced with just
rcu_read_lock().
- The rest of changes are smaller fixes and updates.
The changes have been on linux-next for at least 2 weeks, with the RCU
cleanup present for 2 months. One performance problem was reported with the
RCU change when KASAN + lockdep were enabled, but it was effectively
addressed by the already merged ee57ab5a32 ("locking/lockdep: Disable
KASAN instrumentation of lockdep.c").
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEIduBR9MnFA82q/jtumpXJwqY6poFAmfmwrsUHHBldHIucGF2
bHVAc3VzZS5jb20ACgkQumpXJwqY6prWxgf/S7Pvdywm10vJ6fooYa+GxXNMwhyh
XRjZ4m9gjeTNf2KLwX0XHv0XZeFHOmHfjd3iI+pS6CXZnCFTN9J3XPLYsrTxXUb6
U6zzLf8Zsz8TzeI4dgvSBsZln7oICSACkAgdJCq23hpNKeaeRo91dgiZaIwyZJG3
FekqSFtP7pYhfFoNkrFKysqbgl1+RWWZ79L2qRJA0bPzVFlvRUuh6cOHQw+8RMqf
BYLwnArjTkW8AcXpxIXSiwphDHVZ81B96xoplavyoprA5FDpv1W+8y4DtxdWFn+1
QVWCs/ZV3KrwXWpZev625w3fIOOIXILqRINOzLfvXTw+1xFS3TzSQEpVeg==
=4OKc
-----END PGP SIGNATURE-----
Merge tag 'modules-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules updates from Petr Pavlu:
- Use RCU instead of RCU-sched
The mix of rcu_read_lock(), rcu_read_lock_sched() and
preempt_disable() in the module code and its users has
been replaced with just rcu_read_lock()
- The rest of changes are smaller fixes and updates
* tag 'modules-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux: (32 commits)
MAINTAINERS: Update the MODULE SUPPORT section
module: Remove unnecessary size argument when calling strscpy()
module: Replace deprecated strncpy() with strscpy()
params: Annotate struct module_param_attrs with __counted_by()
bug: Use RCU instead RCU-sched to protect module_bug_list.
static_call: Use RCU in all users of __module_text_address().
kprobes: Use RCU in all users of __module_text_address().
bpf: Use RCU in all users of __module_text_address().
jump_label: Use RCU in all users of __module_text_address().
jump_label: Use RCU in all users of __module_address().
x86: Use RCU in all users of __module_address().
cfi: Use RCU while invoking __module_address().
powerpc/ftrace: Use RCU in all users of __module_text_address().
LoongArch: ftrace: Use RCU in all users of __module_text_address().
LoongArch/orc: Use RCU in all users of __module_address().
arm64: module: Use RCU in all users of __module_text_address().
ARM: module: Use RCU in all users of __module_text_address().
module: Use RCU in all users of __module_text_address().
module: Use RCU in all users of __module_address().
module: Use RCU in search_module_extables().
...
- Fix a large number of x86 Kconfig dependency and help text accuracy
bugs/problems, by Mateusz Jończyk and David Heideberg.
- Fix a VM_PAT interaction with fork() crash. This also touches
core kernel code.
- Fix an ORC unwinder bug for interrupt entries
- Fixes and cleanups.
- Fix an AMD microcode loader bug that can promote verification failures
into success.
- Add early-printk support for MMIO based UARTs on an x86 board that
had no other serial debugging facility and also experienced early
boot crashes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=/qKX
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes and updates from Ingo Molnar:
- Fix a large number of x86 Kconfig dependency and help text accuracy
bugs/problems, by Mateusz Jończyk and David Heideberg
- Fix a VM_PAT interaction with fork() crash. This also touches core
kernel code
- Fix an ORC unwinder bug for interrupt entries
- Fixes and cleanups
- Fix an AMD microcode loader bug that can promote verification
failures into success
- Add early-printk support for MMIO based UARTs on an x86 board that
had no other serial debugging facility and also experienced early
boot crashes
* tag 'x86-urgent-2025-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Fix __apply_microcode_amd()'s return value
x86/mm/pat: Fix VM_PAT handling when fork() fails in copy_page_range()
x86/fpu: Update the outdated comment above fpstate_init_user()
x86/early_printk: Add support for MMIO-based UARTs
x86/dumpstack: Fix inaccurate unwinding from exception stacks due to misplaced assignment
x86/entry: Fix ORC unwinder for PUSH_REGS with save_ret=1
x86/Kconfig: Fix lists in X86_EXTENDED_PLATFORM help text
x86/Kconfig: Correct X86_X2APIC help text
x86/speculation: Remove the extra #ifdef around CALL_NOSPEC
x86/Kconfig: Document release year of glibc 2.3.3
x86/Kconfig: Make CONFIG_PCI_CNB20LE_QUIRK depend on X86_32
x86/Kconfig: Document CONFIG_PCI_MMCONFIG
x86/Kconfig: Update lists in X86_EXTENDED_PLATFORM
x86/Kconfig: Move all X86_EXTENDED_PLATFORM options together
x86/Kconfig: Always enable ARCH_SPARSEMEM_ENABLE
x86/Kconfig: Enable X86_X2APIC by default and improve help text
-----BEGIN PGP SIGNATURE-----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=AHTr
-----END PGP SIGNATURE-----
Merge tag 'bpf_try_alloc_pages' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf try_alloc_pages() support from Alexei Starovoitov:
"The pull includes work from Sebastian, Vlastimil and myself with a lot
of help from Michal and Shakeel.
This is a first step towards making kmalloc reentrant to get rid of
slab wrappers: bpf_mem_alloc, kretprobe's objpool, etc. These patches
make page allocator safe from any context.
Vlastimil kicked off this effort at LSFMM 2024:
https://lwn.net/Articles/974138/
and we continued at LSFMM 2025:
https://lore.kernel.org/all/CAADnVQKfkGxudNUkcPJgwe3nTZ=xohnRshx9kLZBTmR_E1DFEg@mail.gmail.com/
Why:
SLAB wrappers bind memory to a particular subsystem making it
unavailable to the rest of the kernel. Some BPF maps in production
consume Gbytes of preallocated memory. Top 5 in Meta: 1.5G, 1.2G,
1.1G, 300M, 200M. Once we have kmalloc that works in any context BPF
map preallocation won't be necessary.
How:
Synchronous kmalloc/page alloc stack has multiple stages going from
fast to slow: cmpxchg16 -> slab_alloc -> new_slab -> alloc_pages ->
rmqueue_pcplist -> __rmqueue, where rmqueue_pcplist was already
relying on trylock.
This set changes rmqueue_bulk/rmqueue_buddy to attempt a trylock and
return ENOMEM if alloc_flags & ALLOC_TRYLOCK. It then wraps this
functionality into try_alloc_pages() helper. We make sure that the
logic is sane in PREEMPT_RT.
End result: try_alloc_pages()/free_pages_nolock() are safe to call
from any context.
try_kmalloc() for any context with similar trylock approach will
follow. It will use try_alloc_pages() when slab needs a new page.
Though such try_kmalloc/page_alloc() is an opportunistic allocator,
this design ensures that the probability of successful allocation of
small objects (up to one page in size) is high.
Even before we have try_kmalloc(), we already use try_alloc_pages() in
BPF arena implementation and it's going to be used more extensively in
BPF"
* tag 'bpf_try_alloc_pages' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
mm: Fix the flipped condition in gfpflags_allow_spinning()
bpf: Use try_alloc_pages() to allocate pages for bpf needs.
mm, bpf: Use memcg in try_alloc_pages().
memcg: Use trylock to access memcg stock_lock.
mm, bpf: Introduce free_pages_nolock()
mm, bpf: Introduce try_alloc_pages() for opportunistic page allocation
locking/local_lock: Introduce localtry_lock_t
-----BEGIN PGP SIGNATURE-----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=5O7h
-----END PGP SIGNATURE-----
Merge tag 'bpf_res_spin_lock' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf relisient spinlock support from Alexei Starovoitov:
"This patch set introduces Resilient Queued Spin Lock (or rqspinlock
with res_spin_lock() and res_spin_unlock() APIs).
This is a qspinlock variant which recovers the kernel from a stalled
state when the lock acquisition path cannot make forward progress.
This can occur when a lock acquisition attempt enters a deadlock
situation (e.g. AA, or ABBA), or more generally, when the owner of the
lock (which we’re trying to acquire) isn’t making forward progress.
Deadlock detection is the main mechanism used to provide instant
recovery, with the timeout mechanism acting as a final line of
defense. Detection is triggered immediately when beginning the waiting
loop of a lock slow path.
Additionally, BPF programs attached to different parts of the kernel
can introduce new control flow into the kernel, which increases the
likelihood of deadlocks in code not written to handle reentrancy.
There have been multiple syzbot reports surfacing deadlocks in
internal kernel code due to the diverse ways in which BPF programs can
be attached to different parts of the kernel. By switching the BPF
subsystem’s lock usage to rqspinlock, all of these issues are
mitigated at runtime.
This spin lock implementation allows BPF maps to become safer and
remove mechanisms that have fallen short in assuring safety when
nesting programs in arbitrary ways in the same context or across
different contexts.
We run benchmarks that stress locking scalability and perform
comparison against the baseline (qspinlock). For the rqspinlock case,
we replace the default qspinlock with it in the kernel, such that all
spin locks in the kernel use the rqspinlock slow path. As such,
benchmarks that stress kernel spin locks end up exercising rqspinlock.
More details in the cover letter in commit 6ffb9017e9 ("Merge branch
'resilient-queued-spin-lock'")"
* tag 'bpf_res_spin_lock' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (24 commits)
selftests/bpf: Add tests for rqspinlock
bpf: Maintain FIFO property for rqspinlock unlock
bpf: Implement verifier support for rqspinlock
bpf: Introduce rqspinlock kfuncs
bpf: Convert lpm_trie.c to rqspinlock
bpf: Convert percpu_freelist.c to rqspinlock
bpf: Convert hashtab.c to rqspinlock
rqspinlock: Add locktorture support
rqspinlock: Add entry to Makefile, MAINTAINERS
rqspinlock: Add macros for rqspinlock usage
rqspinlock: Add basic support for CONFIG_PARAVIRT
rqspinlock: Add a test-and-set fallback
rqspinlock: Add deadlock detection and recovery
rqspinlock: Protect waiters in trylock fallback from stalls
rqspinlock: Protect waiters in queue from stalls
rqspinlock: Protect pending bit owners from stalls
rqspinlock: Hardcode cond_acquire loops for arm64
rqspinlock: Add support for timeouts
rqspinlock: Drop PV and virtualization support
rqspinlock: Add rqspinlock.h header
...
-----BEGIN PGP SIGNATURE-----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=aN/V
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"For this merge window we're splitting BPF pull request into three for
higher visibility: main changes, res_spin_lock, try_alloc_pages.
These are the main BPF changes:
- Add DFA-based live registers analysis to improve verification of
programs with loops (Eduard Zingerman)
- Introduce load_acquire and store_release BPF instructions and add
x86, arm64 JIT support (Peilin Ye)
- Fix loop detection logic in the verifier (Eduard Zingerman)
- Drop unnecesary lock in bpf_map_inc_not_zero() (Eric Dumazet)
- Add kfunc for populating cpumask bits (Emil Tsalapatis)
- Convert various shell based tests to selftests/bpf/test_progs
format (Bastien Curutchet)
- Allow passing referenced kptrs into struct_ops callbacks (Amery
Hung)
- Add a flag to LSM bpf hook to facilitate bpf program signing
(Blaise Boscaccy)
- Track arena arguments in kfuncs (Ihor Solodrai)
- Add copy_remote_vm_str() helper for reading strings from remote VM
and bpf_copy_from_user_task_str() kfunc (Jordan Rome)
- Add support for timed may_goto instruction (Kumar Kartikeya
Dwivedi)
- Allow bpf_get_netns_cookie() int cgroup_skb programs (Mahe Tardy)
- Reduce bpf_cgrp_storage_busy false positives when accessing cgroup
local storage (Martin KaFai Lau)
- Introduce bpf_dynptr_copy() kfunc (Mykyta Yatsenko)
- Allow retrieving BTF data with BTF token (Mykyta Yatsenko)
- Add BPF kfuncs to set and get xattrs with 'security.bpf.' prefix
(Song Liu)
- Reject attaching programs to noreturn functions (Yafang Shao)
- Introduce pre-order traversal of cgroup bpf programs (Yonghong
Song)"
* tag 'bpf-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (186 commits)
selftests/bpf: Add selftests for load-acquire/store-release when register number is invalid
bpf: Fix out-of-bounds read in check_atomic_load/store()
libbpf: Add namespace for errstr making it libbpf_errstr
bpf: Add struct_ops context information to struct bpf_prog_aux
selftests/bpf: Sanitize pointer prior fclose()
selftests/bpf: Migrate test_xdp_vlan.sh into test_progs
selftests/bpf: test_xdp_vlan: Rename BPF sections
bpf: clarify a misleading verifier error message
selftests/bpf: Add selftest for attaching fexit to __noreturn functions
bpf: Reject attaching fexit/fmod_ret to __noreturn functions
bpf: Only fails the busy counter check in bpf_cgrp_storage_get if it creates storage
bpf: Make perf_event_read_output accessible in all program types.
bpftool: Using the right format specifiers
bpftool: Add -Wformat-signedness flag to detect format errors
selftests/bpf: Test freplace from user namespace
libbpf: Pass BPF token from find_prog_btf_id to BPF_BTF_GET_FD_BY_ID
bpf: Return prog btf_id without capable check
bpf: BPF token support for BPF_BTF_GET_FD_BY_ID
bpf, x86: Fix objtool warning for timed may_goto
bpf: Check map->record at the beginning of check_and_free_fields()
...
- Add sorting of mcount locations at build time
- Rework uaccess functions with C exception handling to shorten inline
assembly size and enable full inlining. This yields near-optimal code
for small constant copies with a ~40kb kernel size increase
- Add support for a configurable STRICT_MM_TYPECHECKS which allows to
generate better code, but also allows to have type checking for
debug builds
- Optimize get_lowcore() for common callers with alternatives that
nearly revert to the pre-relocated lowcore code, while also slightly
reducing syscall entry and exit time
- Convert MACHINE_HAS_* checks for single facility tests into cpu_has_*
style macros that call test_facility(), and for features with additional
conditions, add a new ALT_TYPE_FEATURE alternative to provide a static
branch via alternative patching. Also, move machine feature detection
to the decompressor for early patching and add debugging functionality
to easily show which alternatives are patched
- Add exception table support to early boot / startup code to get rid
of the open coded exception handling
- Use asm_inline for all inline assemblies with EX_TABLE or ALTERNATIVE
to ensure correct inlining and unrolling decisions
- Remove 2k page table leftovers now that s390 has been switched to
always allocate 4k page tables
- Split kfence pool into 4k mappings in arch_kfence_init_pool() and
remove the architecture-specific kfence_split_mapping()
- Use READ_ONCE_NOCHECK() in regs_get_kernel_stack_nth() to silence
spurious KASAN warnings from opportunistic ftrace argument tracing
- Force __atomic_add_const() variants on s390 to always return void,
ensuring compile errors for improper usage
- Remove s390's ioremap_wt() and pgprot_writethrough() due to mismatched
semantics and lack of known users, relying on asm-generic fallbacks
- Signal eventfd in vfio-ap to notify userspace when the guest AP
configuration changes, including during mdev removal
- Convert mdev_types from an array to a pointer in vfio-ccw and vfio-ap
drivers to avoid fake flex array confusion
- Cleanup trap code
- Remove references to the outdated linux390@de.ibm.com address
- Other various small fixes and improvements all over the code
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmfmuPwACgkQjYWKoQLX
FBgTDAgAjKmZ5OYjACRfYepTvKk9SDqa2CBlQZ+BhbAXEVIrxKnv8OkImAXoWNsM
mFxiCxAHWdcD+nqTrxFsXhkNLsndijlwnj/IqZgvy6R/3yNtBlAYRPLujOmVrsQB
dWB8Dl38p63Ip1JfAqyabiAOUjfhrclRcM5FX5tgciXA6N/vhY3OM6k0+k7wN4Nj
Dei/rCrnYRXTrFQgtM4w8JTIrwdnXjeKvaTYCflh4Q5ISJ7TceSF7cqq8HOs5hhK
o2ciaoTdx212522CIsxeN3Ls3jrn8bCOCoOeSCysc5RL84grAuFnmjSajo1LFide
S/TQtHXYy78Wuei9xvHi561ogiv/ww==
=Kxgc
-----END PGP SIGNATURE-----
Merge tag 's390-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add sorting of mcount locations at build time
- Rework uaccess functions with C exception handling to shorten inline
assembly size and enable full inlining. This yields near-optimal code
for small constant copies with a ~40kb kernel size increase
- Add support for a configurable STRICT_MM_TYPECHECKS which allows to
generate better code, but also allows to have type checking for debug
builds
- Optimize get_lowcore() for common callers with alternatives that
nearly revert to the pre-relocated lowcore code, while also slightly
reducing syscall entry and exit time
- Convert MACHINE_HAS_* checks for single facility tests into cpu_has_*
style macros that call test_facility(), and for features with
additional conditions, add a new ALT_TYPE_FEATURE alternative to
provide a static branch via alternative patching. Also, move machine
feature detection to the decompressor for early patching and add
debugging functionality to easily show which alternatives are patched
- Add exception table support to early boot / startup code to get rid
of the open coded exception handling
- Use asm_inline for all inline assemblies with EX_TABLE or ALTERNATIVE
to ensure correct inlining and unrolling decisions
- Remove 2k page table leftovers now that s390 has been switched to
always allocate 4k page tables
- Split kfence pool into 4k mappings in arch_kfence_init_pool() and
remove the architecture-specific kfence_split_mapping()
- Use READ_ONCE_NOCHECK() in regs_get_kernel_stack_nth() to silence
spurious KASAN warnings from opportunistic ftrace argument tracing
- Force __atomic_add_const() variants on s390 to always return void,
ensuring compile errors for improper usage
- Remove s390's ioremap_wt() and pgprot_writethrough() due to
mismatched semantics and lack of known users, relying on asm-generic
fallbacks
- Signal eventfd in vfio-ap to notify userspace when the guest AP
configuration changes, including during mdev removal
- Convert mdev_types from an array to a pointer in vfio-ccw and vfio-ap
drivers to avoid fake flex array confusion
- Cleanup trap code
- Remove references to the outdated linux390@de.ibm.com address
- Other various small fixes and improvements all over the code
* tag 's390-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (78 commits)
s390: Use inline qualifier for all EX_TABLE and ALTERNATIVE inline assemblies
s390/kfence: Split kfence pool into 4k mappings in arch_kfence_init_pool()
s390/ptrace: Avoid KASAN false positives in regs_get_kernel_stack_nth()
s390/boot: Ignore vmlinux.map
s390/sysctl: Remove "vm/allocate_pgste" sysctl
s390: Remove 2k vs 4k page table leftovers
s390/tlb: Use mm_has_pgste() instead of mm_alloc_pgste()
s390/lowcore: Use lghi instead llilh to clear register
s390/syscall: Merge __do_syscall() and do_syscall()
s390/spinlock: Implement SPINLOCK_LOCKVAL with inline assembly
s390/smp: Implement raw_smp_processor_id() with inline assembly
s390/current: Implement current with inline assembly
s390/lowcore: Use inline qualifier for get_lowcore() inline assembly
s390: Move s390 sysctls into their own file under arch/s390
s390/syscall: Simplify syscall_get_arguments()
s390/vfio-ap: Notify userspace that guest's AP config changed when mdev removed
s390: Remove ioremap_wt() and pgprot_writethrough()
s390/mm: Add configurable STRICT_MM_TYPECHECKS
s390/mm: Convert pgste_val() into function
s390/mm: Convert pgprot_val() into function
...
fwctl is a new subsystem intended to bring some common rules and order to
the growing pattern of exposing a secure FW interface directly to
userspace. Unlike existing places like RDMA/DRM/VFIO/uacce that are
exposing a device for datapath operations fwctl is focused on debugging,
configuration and provisioning of the device. It will not have the
necessary features like interrupt delivery to support a datapath.
This concept is similar to the long standing practice in the "HW" RAID
space of having a device specific misc device to manage the RAID
controller FW. fwctl generalizes this notion of a companion debug and
management interface that goes along with a dataplane implemented in an
appropriate subsystem.
There have been three LWN articles written discussing various aspects of
this:
https://lwn.net/Articles/955001/https://lwn.net/Articles/969383/https://lwn.net/Articles/990802/
This pull requests includes three drivers to launch the subsystem:
- CXL provides a vendor scheme for executing commands and a way to learn
the 'command effects' (ie the security properties) of such
commands. The fwctl driver allows access to these mechanism within the
fwctl security model
- mlx5 is family of networking products, the driver supports all current
Mellanox HW still receiving FW feature updates. This includes RDMA
multiprotocol NICs like ConnectX and the Bluefield family of Smart
NICs.
- AMD/Pensando Distributed Services card is a multi protocol Smart NIC
with a multi PCI function design. fwctl works on the management PCI
function following a 'command effects' model similar to CXL.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZ939zQAKCRCFwuHvBreF
YdOoAQCJq59/UC7lXU+sOsR6LISaDVTT5jAweBo0o036P9+DNAEA1iQdZ/GK2yCJ
Ub33Xo9L+hzIpIbCouI3BtCXqymybAg=
=f5YG
-----END PGP SIGNATURE-----
Merge tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull fwctl subsystem from Jason Gunthorpe:
"fwctl is a new subsystem intended to bring some common rules and order
to the growing pattern of exposing a secure FW interface directly to
userspace.
Unlike existing places like RDMA/DRM/VFIO/uacce that are exposing a
device for datapath operations fwctl is focused on debugging,
configuration and provisioning of the device. It will not have the
necessary features like interrupt delivery to support a datapath.
This concept is similar to the long standing practice in the "HW" RAID
space of having a device specific misc device to manage the RAID
controller FW. fwctl generalizes this notion of a companion debug and
management interface that goes along with a dataplane implemented in
an appropriate subsystem.
There have been three LWN articles written discussing various aspects
of this:
https://lwn.net/Articles/955001/https://lwn.net/Articles/969383/https://lwn.net/Articles/990802/
This includes three drivers to launch the subsystem:
- CXL provides a vendor scheme for executing commands and a way to
learn the 'command effects' (ie the security properties) of such
commands. The fwctl driver allows access to these mechanism within
the fwctl security model
- mlx5 is family of networking products, the driver supports all
current Mellanox HW still receiving FW feature updates. This
includes RDMA multiprotocol NICs like ConnectX and the Bluefield
family of Smart NICs.
- AMD/Pensando Distributed Services card is a multi protocol Smart
NIC with a multi PCI function design. fwctl works on the management
PCI function following a 'command effects' model similar to CXL"
* tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (30 commits)
pds_fwctl: add Documentation entries
pds_fwctl: add rpc and query support
pds_fwctl: initial driver framework
pds_core: add new fwctl auxiliary_device
pds_core: specify auxiliary_device to be created
pds_core: make pdsc_auxbus_dev_del() void
cxl: Fixup kdoc issues for include/cxl/features.h
fwctl/cxl: Add documentation to FWCTL CXL
cxl/test: Add Set Feature support to cxl_test
cxl/test: Add Get Feature support to cxl_test
cxl: Add support to handle user feature commands for set feature
cxl: Add support to handle user feature commands for get feature
cxl: Add support for fwctl RPC command to enable CXL feature commands
cxl: Move cxl feature command structs to user header
cxl: Add FWCTL support to CXL
mlx5: Create an auxiliary device for fwctl_mlx5
fwctl/mlx5: Support for communicating with mlx5 fw
fwctl: Add documentation
fwctl: FWCTL_RPC to execute a Remote Procedure Call to device firmware
taint: Add TAINT_FWCTL
...
The FORCE_NEED_SRCU_NMI_SAFE is useful only for those wishing to test
the SRCU code paths that accommodate architectures that do not have
NMI-safe per-CPU operations, that is, those architectures that do not
select the ARCH_HAS_NMI_SAFE_THIS_CPU_OPS Kconfig option. As such, this
is a specialized Kconfig option that is not intended for casual users.
This commit therefore hides it behind the RCU_EXPERT Kconfig option.
Given that this new FORCE_NEED_SRCU_NMI_SAFE Kconfig option has no effect
unless the ARCH_HAS_NMI_SAFE_THIS_CPU_OPS Kconfig option is also selected,
it also depends on this Kconfig option.
[ paulmck: Apply Geert Uytterhoeven feedback. ]
[ boqun: Add the "Fixes" tag. ]
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdX6dy9_tmpLkpcnGzxyRbe6qSWYukcPp=H1GzZdyd3qBQ@mail.gmail.com/
Fixes: 536e8b9b80 ("srcu: Add FORCE_NEED_SRCU_NMI_SAFE Kconfig for testing")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
If the destination buffer has a fixed length, strscpy() automatically
determines the size of the destination buffer using sizeof() if the
argument is omitted. This makes the explicit sizeof() unnecessary.
Furthermore, CMD_BUFLEN is equal to sizeof(kdb_prompt_str) and can also
be removed. Remove them to shorten and simplify the code.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20250319163341.2123-2-thorsten.blum@linux.dev
Signed-off-by: Daniel Thompson <daniel@riscstar.com>
Problem: The set environment variable logic uses a static "heap" like
buffer to store the values of the variables, and they are never freed,
on top of that this is redundant since the kernel supplies allocation
facilities which are even used also in this file.
Solution: Remove the weird static buffer logic and use kmalloc instead,
call kfree when overriding an existing variable.
Signed-off-by: Nir Lichtman <nir@lichtman.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250204054741.GB1219827@lichtman.org
Signed-off-by: Daniel Thompson <daniel@riscstar.com>
This branch contains one patch:
capability: Remove unused has_capability
This removes a helper function whose last user (smack) stopped using
it in 2018.
This has been in linux-next for most of the the last cycle with no
apparent issues. It is available at:
git@git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux.git #caps-20250327
on top of commit 2014c95afe (tag: v6.14-rc1)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEqb0/8XByttt4D8+UNXDaFycKziQFAmfmHIcACgkQNXDaFycK
ziRQFggAl1fQCS/LNhFY7SAmkv8S6yJemYt8hNvRjlOwwMB2aZbFFfZeVGdO73od
mkQAoZA0ppPT8aXH2pbfcCsKI2UFQQ/cm6Jpl4wCEZmKr2ZTxcH5zCRbUQeiR/7t
QvcWVXCC47BnI9ab+OiCCaCw5HtAuweax6IGjFTregjUAEcBk8aoF9PJMvlT0e6j
WQqWegPVS1GSiQqWGxPzdfnUOSkGuak9setg53pCTQE6UjMIK7uVxfSEJpe3pKvH
ZvRvkif5UJrdUAr9MKMvf/gkKEl5xpAoTRdoaiWdzZ/arZ77HD32qoi/o3s4P+7a
7ZHvAc+Xjm0AIO/4JrjzFw0zH/svSg==
=rbE0
-----END PGP SIGNATURE-----
Merge tag 'caps-pr-20250327' of git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux
Pull capabilities update from Serge Hallyn:
"This contains just one patch that removes a helper function whose last
user (smack) stopped using it in 2018"
* tag 'caps-pr-20250327' of git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux:
capability: Remove unused has_capability
This reverts commit 36f5f026df, reversing
changes made to 43a7eec035.
Thomas says:
"I just noticed that for some incomprehensible reason, probably sheer
incompetemce when trying to utilize b4, I managed to merge an outdated
_and_ buggy version of that series.
Can you please revert that merge completely?"
Done.
Requested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of using kaslr_offset() just record the location of "_text". This
makes it possible for user space to use either the System.map or
/proc/kallsyms as what to map all addresses to functions with.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250326220304.38dbedcd@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Since the previous boot trace buffer can include module text address in
the stacktrace. As same as the kernel text address, convert the module
text address using the module address information.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/174282689201.356346.17647540360450727687.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If the last boot data is already cleared, there is no reason to update it
again. Skip if the TRACE_ARRAY_FL_LAST_BOOT is cleared.
Also, for calling save_mod() when module loading, we don't need to check
the trace is active or not because any module address can be on the
stacktrace.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/174165660328.1173316.15529357882704817499.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In allocate_trace_buffer() the following code:
buf->buffer = ring_buffer_alloc_range(size, rb_flags, 0,
tr->range_addr_start,
tr->range_addr_size,
struct_size(tscratch, entries, 128));
tscratch = ring_buffer_meta_scratch(buf->buffer, &scratch_size);
setup_trace_scratch(tr, tscratch, scratch_size);
Has undefined behavior if ring_buffer_alloc_range() fails because
"scratch_size" is not initialize. If the allocation fails, then
buf->buffer will be NULL. The ring_buffer_meta_scratch() will return
NULL immediately if it is passed a NULL buffer and it will not update
scratch_size. Then setup_trace_scratch() will return immediately if
tscratch is NULL.
Although there's no real issue here, but it is considered undefined
behavior to pass an uninitialized variable to a function as input, and
UBSan may complain about it.
Just initialize scratch_size to zero to make the code defined behavior and
a little more robust.
Link: https://lore.kernel.org/all/44c5deaa-b094-4852-90f9-52f3fb10e67a@stanley.mountain/
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There are some code which depends on CONFIG_MODULES. #ifdef
to enclose it.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/174230515367.2909896.8132122175220657625.stgit@mhiramat.tok.corp.google.com
Fixes: dca91c1c5468 ("tracing: Have persistent trace instances save module addresses")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Make the ring buffer on reserved memory to be freeable. This allows us
to free the trace instance on the reserved memory without changing
cmdline and rebooting. Even if we can not change the kernel cmdline
for security reason, we can release the reserved memory for the ring
buffer as free (available) memory.
For example, boot kernel with reserved memory;
"reserve_mem=20M:2M:trace trace_instance=boot_mapped^traceoff@trace"
~ # free
total used free shared buff/cache available
Mem: 1995548 50544 1927568 14964 17436 1911480
Swap: 0 0 0
~ # rmdir /sys/kernel/tracing/instances/boot_mapped/
[ 23.704023] Freeing reserve_mem:trace memory: 20476K
~ # free
total used free shared buff/cache available
Mem: 2016024 41844 1956740 14968 17440 1940572
Swap: 0 0 0
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/173989134814.230693.18199312930337815629.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When a module is loaded and a persistent buffer is actively tracing, add
it to the list of modules in the persistent memory.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250305164609.469844721@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add the last boot module's names and addresses to the last_boot_info file.
This only shows the module information from a previous boot. If the buffer
is started and is recording the current boot, this file still will only
show "current".
~# cat instances/boot_mapped/last_boot_info
10c00000 [kernel]
ffffffffc00ca000 usb_serial_simple
ffffffffc00ae000 usbserial
ffffffffc008b000 bfq
~# echo function > instances/boot_mapped/current_tracer
~# cat instances/boot_mapped/last_boot_info
# Current
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250305164609.299186021@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
For trace instances that are mapped to persistent memory, have them use
the scratch area to save the currently loaded modules. This will allow
where the modules have been loaded on the next boot so that their
addresses can be deciphered by using where they were loaded previously.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250305164609.129741650@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The tracing system needs a way to save all the currently loaded modules
and their addresses into persistent memory so that it can evaluate the
addresses on a reboot from a crash. When the persistent memory trace
starts, it will load the module addresses and names into the persistent
memory. To do so, it will call the module_for_each_mod() function and pass
it a function and data structure to get called on each loaded module. Then
it can record the memory.
This only implements that function.
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: linux-modules@vger.kernel.org
Link: https://lore.kernel.org/20250305164608.962615966@goodmis.org
Acked-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There's no reason to save the KASLR offset for the ring buffer itself.
That is used by the tracer. Now that the tracer has a way to save data in
the persistent memory of the ring buffer, have the tracing infrastructure
take care of the saving of the KASLR offset.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250305164608.792722274@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Now that there's one meta data at the start of the persistent memory used by
the ring buffer, allow the caller to request some memory right after that
data that it can use as its own persistent memory.
Also fix some white space issues with ring_buffer_alloc().
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250305164608.619631731@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Instead of just having a meta data at the first page of each sub buffer
that has duplicate data, add a new meta page to the entire block of memory
that holds the duplicate data and remove it from the sub buffer meta data.
This will open up the extra memory in this first page to be used by the
tracer for its own persistent data.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250305164608.446351513@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Instead of saving off the text and data pointers and using them to compare
with the current boot's text and data pointers, just save off the KASLR
offset. Then that can be used to figure out how to read the previous boots
buffer.
The last_boot_info will now show this offset, but only if it is for a
previous boot:
~# cat instances/boot_mapped/last_boot_info
39000000 [kernel]
~# echo function > instances/boot_mapped/current_tracer
~# cat instances/boot_mapped/last_boot_info
# Current
If the KASLR offset saved is for the current boot, the last_boot_info will
show the value of "current".
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250305164608.274956504@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The calculation of bytes-dropped and bytes_dropped_nested is reversed.
Although it does not affect the final calculation of total_dropped,
it should still be modified.
Link: https://lore.kernel.org/20250223070106.6781-1-yangfeng59949@163.com
Fixes: 6c43e554a2 ("ring-buffer: Add ring buffer startup selftest")
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Binary printing functions are using printf() type of format, and compiler
is not happy about them as is:
kernel/trace/trace.c:3292:9: error: function ‘trace_vbprintk’ might be a candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
kernel/trace/trace_seq.c:182:9: error: function ‘trace_seq_bprintf’ might be a candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
Fix the compilation errors by adding __printf() attribute.
While at it, move existing __printf() attributes from the implementations
to the declarations. IT also fixes incorrect attribute parameters that are
used for trace_array_printk().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250321144822.324050-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
- Removal of support for IBM Cell Blades
- SMP support for microwatt platform
- Support for inline static calls on PPC32
- Enable pmu selftests for power11 platform
- Enable hardware trace macro (HTM) hcall support
- Support for limited address mode capability
- Changes to RMA size from 512 MB to 768 MB to handle fadump
- Misc fixes and cleanups
Thanks to: Abhishek Dubey, Amit Machhiwal, Andreas Schwab, Arnd Bergmann,
Athira Rajeev, Avnish Chouhan, Christophe Leroy, Disha Goel, Donet Tom, Gaurav
Batra, Gautam Menghani, Hari Bathini, Kajol Jain, Kees Cook, Mahesh Salgaonkar,
Michael Ellerman, Paul Mackerras, Ritesh Harjani (IBM), Sathvika Vasireddy,
Segher Boessenkool, Sourabh Jain, Vaibhav Jain, Venkat Rao Bagalkote.
-----BEGIN PGP SIGNATURE-----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=GFcj
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- Remove support for IBM Cell Blades
- SMP support for microwatt platform
- Support for inline static calls on PPC32
- Enable pmu selftests for power11 platform
- Enable hardware trace macro (HTM) hcall support
- Support for limited address mode capability
- Changes to RMA size from 512 MB to 768 MB to handle fadump
- Misc fixes and cleanups
Thanks to Abhishek Dubey, Amit Machhiwal, Andreas Schwab, Arnd Bergmann,
Athira Rajeev, Avnish Chouhan, Christophe Leroy, Disha Goel, Donet Tom,
Gaurav Batra, Gautam Menghani, Hari Bathini, Kajol Jain, Kees Cook,
Mahesh Salgaonkar, Michael Ellerman, Paul Mackerras, Ritesh Harjani
(IBM), Sathvika Vasireddy, Segher Boessenkool, Sourabh Jain, Vaibhav
Jain, and Venkat Rao Bagalkote.
* tag 'powerpc-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (61 commits)
powerpc/kexec: fix physical address calculation in clear_utlb_entry()
crypto: powerpc: Mark ghashp8-ppc.o as an OBJECT_FILES_NON_STANDARD
powerpc: Fix 'intra_function_call not a direct call' warning
powerpc/perf: Fix ref-counting on the PMU 'vpa_pmu'
KVM: PPC: Enable CAP_SPAPR_TCE_VFIO on pSeries KVM guests
powerpc/prom_init: Fixup missing #size-cells on PowerBook6,7
powerpc/microwatt: Add SMP support
powerpc: Define config option for processors with broadcast TLBIE
powerpc/microwatt: Define an idle power-save function
powerpc/microwatt: Device-tree updates
powerpc/microwatt: Select COMMON_CLK in order to get the clock framework
net: toshiba: Remove reference to PPC_IBM_CELL_BLADE
net: spider_net: Remove powerpc Cell driver
cpufreq: ppc_cbe: Remove powerpc Cell driver
genirq: Remove IRQ_EDGE_EOI_HANDLER
docs: Remove reference to removed CBE_CPUFREQ_SPU_GOVERNOR
powerpc: Remove UDBG_RTAS_CONSOLE
powerpc/io: Use standard barrier macros in io.c
powerpc/io: Rename _insw_ns() etc.
powerpc/io: Use generic raw accessors
...
- probe-events: Add comments about entry data storing code to clarify
where and how the entry data is stored for function return events.
- probe-events: Log error for exceeding the number of arguments to help
user to identify error reason via tracefs/error_log file.
- selftests/ftrace: Improve the ftracetest to add followngs.
. Expand the tprobe event test to check if it can correctly find
the wrong format tracepoint name.
. Add new syntax error test to check whether error_log correctly
indicates a wrong character in the tracepoint name.
. Add a new dynamic events argument limitation test case which checks
max number of probe arguments.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmflTlobHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8ba9UIALzzZQxzUhJYO/B/XaCz
KTuSrU2594cLr3nCrmCfL3UHUCr5IcjXKCfUdrgzE9mckWF+nVRXWwbp29KpOQky
fzU9Ardbr7ksGAYFk4My+P/BeYa7vh9LwofXzWlJibANVxWvq66+GfKnWnh1P8Bl
/zjov61DAEQmDfXNGZ2oTmKnYYMoPkJU4voRvAEUgiP02SrF04UUa00uC7hmZJJV
aI5b6TatE5FDEmAoHWh0cf04HoyevRyLVOQd5GSswH/oWpyhs90M7a9WENHamBx6
RXEZ3xYyuH9zBSvYVeRn2H1eHnGCR4RMctZiRGXF8EdLWo7RXRQ1Hp9CgvwDrU8Z
IL0=
=vZ3e
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- probe-events: Add comments about entry data storing code to clarify
where and how the entry data is stored for function return events.
- probe-events: Log error for exceeding the number of arguments to help
user to identify error reason via tracefs/error_log file.
- Improve the ftracetest selftests:
- Expand the tprobe event test to check if it can correctly find the
wrong format tracepoint name.
- Add new syntax error test to check whether error_log correctly
indicates a wrong character in the tracepoint name.
- Add a new dynamic events argument limitation test case which
checks max number of probe arguments.
* tag 'probes-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: probe-events: Add comments about entry data storing code
selftests/ftrace: Add dynamic events argument limitation test case
selftests/ftrace: Add new syntax error test
selftests/ftrace: Expand the tprobe event test to check wrong format
tracing: probe-events: Log error for exceeding the number of arguments
-----BEGIN PGP SIGNATURE-----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=ggzJ
-----END PGP SIGNATURE-----
Merge tag 'livepatching-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
- Add a selftest for tracing of a livepatched function
- Skip a selftest when kprobes are not using ftrace
- Some documentation clean up
* tag 'livepatching-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests: livepatch: test if ftrace can trace a livepatched function
selftests: livepatch: add new ftrace helpers functions
selftest/livepatch: Only run test-kprobe with CONFIG_KPROBES_ON_FTRACE
docs: livepatch: move text out of code block
livepatch: Add comment to clarify klp_add_nops()
-----BEGIN PGP SIGNATURE-----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=lNTZ
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- New option "printk.debug_non_panic_cpus" allows to store printk
messages from non-panic CPUs during panic. It might be useful when
panic() fails. It is disabled by default because it increases the
chance to see the messages printed before panic() and on the
panic-CPU.
- New build option "CONFIG_NULL_TTY_DEFAULT_CONSOLE" allows to build
kernel without the virtual terminal support which prefers ttynull
over serial console.
- Do not unblank suspended consoles.
- Some code clean up.
* tag 'printk-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk/panic: Add option to allow non-panic CPUs to write to the ring buffer.
printk: Add an option to allow ttynull to be a default console device
printk: Check CON_SUSPEND when unblanking a console
printk: Rename console_start to console_resume
printk: Rename console_stop to console_suspend
printk: Rename resume_console to console_resume_all
printk: Rename suspend_console to console_suspend_all
- Add option traceoff_after_boot
In order to debug kernel boot, it sometimes is helpful to enable tracing
via the kernel command line. Unfortunately, by the time the login prompt
appears, the trace is overwritten by the init process and other user space
start up applications. Adding a "traceoff_after_boot" will disable tracing
when the kernel passes control to init which will allow developers to be
able to see the traces that occurred during boot.
- Clean up the mmflags macros that display the GFP flags in trace events
The macros to print the GFP flags for trace events had a bit of
duplication. The code was restructured to remove duplication and in the
process it also adds some flags that were missed before.
- Removed some dead code and scripts/draw_functrace.py
draw_functrace.py hasn't worked in years and as nobody complained
about it, remove it.
- Constify struct event_trigger_ops
The event_trigger_ops is just a structure that has function pointers that
are assigned when the variables are created. These variables should all be
constants.
- Other minor clean ups and fixes
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ+V9IhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qr4RAP9JhE3n69pGuOVaJTN/LGLr2Axl59n4
KqZSZS1nUM76/gD6AxYpR7nxyxgJ7VjNkLptS9tSjJVdPDxGAl0v3eO04w4=
=SU30
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Add option traceoff_after_boot
In order to debug kernel boot, it sometimes is helpful to enable
tracing via the kernel command line. Unfortunately, by the time the
login prompt appears, the trace is overwritten by the init process
and other user space start up applications.
Adding a "traceoff_after_boot" will disable tracing when the kernel
passes control to init which will allow developers to be able to see
the traces that occurred during boot.
- Clean up the mmflags macros that display the GFP flags in trace
events
The macros to print the GFP flags for trace events had a bit of
duplication. The code was restructured to remove duplication and in
the process it also adds some flags that were missed before.
- Removed some dead code and scripts/draw_functrace.py
draw_functrace.py hasn't worked in years and as nobody complained
about it, remove it.
- Constify struct event_trigger_ops
The event_trigger_ops is just a structure that has function pointers
that are assigned when the variables are created. These variables
should all be constants.
- Other minor clean ups and fixes
* tag 'trace-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Replace strncpy with memcpy for fixed-length substring copy
tracing: Fix synth event printk format for str fields
tracing: Do not use PERF enums when perf is not defined
tracing: Ensure module defining synth event cannot be unloaded while tracing
tracing: fix return value in __ftrace_event_enable_disable for TRACE_REG_UNREGISTER
tracing/osnoise: Fix possible recursive locking for cpus_read_lock()
tracing: Align synth event print fmt
tracing: gfp: vsprintf: Do not print "none" when using %pGg printf format
tracepoint: Print the function symbol when tracepoint_debug is set
tracing: Constify struct event_trigger_ops
scripts/tracing: Remove scripts/tracing/draw_functrace.py
tracing: Update MAINTAINERS file to include tracepoint.c
tracing/user_events: Slightly simplify user_seq_show()
tracing/user_events: Don't use %pK through printk
tracing: gfp: Remove duplication of recording GFP flags
tracing: Remove orphaned event_trace_printk
ring-buffer: Fix typo in comment about header page pointer
tracing: Add traceoff_after_boot option
- Add some trace events to osnoise and timerlat sample generation
This adds more information to the osnoise and timerlat tracers as well as
allows BPF programs to be attached to these locations to extract even more
data.
- Fix to DECLARE_TRACE_CONDITION() macro
It wasn't used but now will be and it happened to be broken causing the
build to fail.
- Add scheduler specification monitors to runtime verifier (RV)
This is a continuation of Daniel Bristot's work.
RV allows monitors to run and react concurrently. Running the cumulative
model is equivalent to running single components using the same
reactors, with the advantage that it's easier to point out which
specification failed in case of error.
This update introduces nested monitors to RV, in short, the sysfs
monitor folder will contain a monitor named sched, which is nothing but
an empty container for other monitors. Controlling the sched monitor
(enable, disable, set reactors) controls all nested monitors.
The following scheduling monitors are added:
* sco: scheduling context operations
Monitor to ensure sched_set_state happens only in thread context
* tss: task switch while scheduling
Monitor to ensure sched_switch happens only in scheduling context
* snroc: set non runnable on its own context
Monitor to ensure set_state happens only in the respective task's context
* scpd: schedule called with preemption disabled
Monitor to ensure schedule is called with preemption disabled
* snep: schedule does not enable preempt
Monitor to ensure schedule does not enable preempt
* sncid: schedule not called with interrupt disabled
Monitor to ensure schedule is not called with interrupt disabled
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ+QhuxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qg62AP9bkeNDbiCuAqjZGddV09Hw26wC3yum
kQoNSebD8G52rQEA9GDjK37xGzYwW/fJokhJVTV39qfub6inAJE5dS6WeQY=
=8Ikv
-----END PGP SIGNATURE-----
Merge tag 'trace-latency-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull latency tracing updates from Steven Rostedt:
- Add some trace events to osnoise and timerlat sample generation
This adds more information to the osnoise and timerlat tracers as
well as allows BPF programs to be attached to these locations to
extract even more data.
- Fix to DECLARE_TRACE_CONDITION() macro
It wasn't used but now will be and it happened to be broken causing
the build to fail.
- Add scheduler specification monitors to runtime verifier (RV)
This is a continuation of Daniel Bristot's work.
RV allows monitors to run and react concurrently. Running the
cumulative model is equivalent to running single components using the
same reactors, with the advantage that it's easier to point out which
specification failed in case of error.
This update introduces nested monitors to RV, in short, the sysfs
monitor folder will contain a monitor named sched, which is nothing
but an empty container for other monitors. Controlling the sched
monitor (enable, disable, set reactors) controls all nested monitors.
The following scheduling monitors are added:
- sco: scheduling context operations
Monitor to ensure sched_set_state happens only in thread context
- tss: task switch while scheduling
Monitor to ensure sched_switch happens only in scheduling context
- snroc: set non runnable on its own context
Monitor to ensure set_state happens only in the respective task's context
- scpd: schedule called with preemption disabled
Monitor to ensure schedule is called with preemption disabled
- snep: schedule does not enable preempt
Monitor to ensure schedule does not enable preempt
- sncid: schedule not called with interrupt disabled
Monitor to ensure schedule is not called with interrupt disabled
* tag 'trace-latency-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/rv: Allow rv list to filter for container
Documentation/rv: Add docs for the sched monitors
verification/dot2k: Add support for nested monitors
tools/rv: Add support for nested monitors
rv: Add scpd, snep and sncid per-cpu monitors
rv: Add snroc per-task monitor
rv: Add sco and tss per-cpu monitors
rv: Add option for nested monitors and include sched
sched: Add sched tracepoints for RV task model
rv: Add license identifiers to monitor files
tracing: Fix DECLARE_TRACE_CONDITION
trace/osnoise: Add trace events for samples
- Record function parameters for function and function graph tracers
An option has been added to function tracer (func-args) and the function
graph tracer (funcgraph-args) that when set, the tracers will record the
registers that hold the arguments into each function event. On reading of
the trace, it will use BTF to print those arguments. Most archs support up
to 6 arguments (depending on the complexity of the arguments) and those
are printed. If a function has more arguments then what was recorded, the
output will end with " ... )".
Example of function graph tracer:
6) | dummy_xmit [dummy](skb = 0x8887c100, dev = 0x872ca000) {
6) | consume_skb(skb = 0x8887c100) {
6) | skb_release_head_state(skb = 0x8887c100) {
6) 0.178 us | sock_wfree(skb = 0x8887c100)
6) 0.627 us | }
- The rest of the changes are minor clean ups and fixes
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ+M9vRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qrBGAP9NTn4Lpci69n8FJGfz+UKUEKbzOOeg
QrkIZIxbm8N56gEA0RaUionWjt1znZXUdBTsE3h+en/Ik0//VZytQcmJBwM=
=fxuG
-----END PGP SIGNATURE-----
Merge tag 'ftrace-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace updates from Steven Rostedt:
- Record function parameters for function and function graph tracers
An option has been added to function tracer (func-args) and the
function graph tracer (funcgraph-args) that when set, the tracers
will record the registers that hold the arguments into each function
event. On reading of the trace, it will use BTF to print those
arguments. Most archs support up to 6 arguments (depending on the
complexity of the arguments) and those are printed.
If a function has more arguments then what was recorded, the output
will end with " ... )".
Example of function graph tracer:
6) | dummy_xmit [dummy](skb = 0x8887c100, dev = 0x872ca000) {
6) | consume_skb(skb = 0x8887c100) {
6) | skb_release_head_state(skb = 0x8887c100) {
6) 0.178 us | sock_wfree(skb = 0x8887c100)
6) 0.627 us | }
- The rest of the changes are minor clean ups and fixes
* tag 'ftrace-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Use hashtable.h for event_hash
tracing: Fix use-after-free in print_graph_function_flags during tracer switching
function_graph: Remove the unused variable func
ftrace: Add arguments to function tracer
ftrace: Have funcgraph-args take affect during tracing
ftrace: Add support for function argument to graph tracer
ftrace: Add print_function_args()
ftrace: Have ftrace_free_filter() WARN and exit if ops is active
fgraph: Correct typo in ftrace_return_to_handler comment
- Implement arm64 build time sorting of the mcount location table
When gcc is used to build arm64, the mcount_loc section is all zeros in
the vmlinux elf file. The addresses are stored in the Elf_Rela location.
To sort at build time, an array is allocated and the addresses are added
to it via the content of the mcount_loc section as well as he Elf_Rela
data. After sorting, the information is put back into the Elf_Rela which
now has the section sorted.
- Make sorting of mcount location table for arm64 work with clang as well
When clang is used, the mcount_loc section contains the addresses, unlike
the gcc build. An array is still created and the sorting works for both
methods.
- Remove weak functions from the mcount_loc section
Have the sorttable code pass in the data of functions defined via nm -S
which shows the functions as well as their sizes. Using this information
the sorttable code can determine if a function in the mcount_loc section
was weak and overridden. If the function is not found, it is set to be
zero. On boot, when the mcount_loc section is read and the ftrace table is
created, if the address in the mcount_loc is not in the kernel core text
then it is removed and not added to the ftrace_filter_functions (the
functions that can be attached by ftrace callbacks).
- Update and fix the reporting of how much data is used for ftrace functions
On boot, a report of how many pages were used by the ftrace table as well
as how they were grouped (the table holds a list of sections that are
groups of pages that were able to be allocated). The removing of the weak
functions required the accounting to be updated.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ+MnThQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qivsAQDhPOCaONai7rvHX9T1aOHGjdajZ7SI
qoZgBOsc2ZUkoQD/U2M/m7Yof9aR4I+VFKtT5NsAwpfqPSOL/t/1j6UEOQ8=
=45AV
-----END PGP SIGNATURE-----
Merge tag 'trace-sorttable-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing / sorttable updates from Steven Rostedt:
- Implement arm64 build time sorting of the mcount location table
When gcc is used to build arm64, the mcount_loc section is all zeros
in the vmlinux elf file. The addresses are stored in the Elf_Rela
location.
To sort at build time, an array is allocated and the addresses are
added to it via the content of the mcount_loc section as well as he
Elf_Rela data. After sorting, the information is put back into the
Elf_Rela which now has the section sorted.
- Make sorting of mcount location table for arm64 work with clang as
well
When clang is used, the mcount_loc section contains the addresses,
unlike the gcc build. An array is still created and the sorting works
for both methods.
- Remove weak functions from the mcount_loc section
Have the sorttable code pass in the data of functions defined via
'nm -S' which shows the functions as well as their sizes. Using this
information the sorttable code can determine if a function in the
mcount_loc section was weak and overridden. If the function is not
found, it is set to be zero. On boot, when the mcount_loc section is
read and the ftrace table is created, if the address in the
mcount_loc is not in the kernel core text then it is removed and not
added to the ftrace_filter_functions (the functions that can be
attached by ftrace callbacks).
- Update and fix the reporting of how much data is used for ftrace
functions
On boot, a report of how many pages were used by the ftrace table as
well as how they were grouped (the table holds a list of sections
that are groups of pages that were able to be allocated). The
removing of the weak functions required the accounting to be updated.
* tag 'trace-sorttable-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
scripts/sorttable: Allow matches to functions before function entry
scripts/sorttable: Use normal sort if theres no relocs in the mcount section
ftrace: Check against is_kernel_text() instead of kaslr_offset()
ftrace: Test mcount_loc addr before calling ftrace_call_addr()
ftrace: Have ftrace pages output reflect freed pages
ftrace: Update the mcount_loc check of skipped entries
scripts/sorttable: Zero out weak functions in mcount_loc table
scripts/sorttable: Always use an array for the mcount_loc sorting
scripts/sorttable: Have mcount rela sort use direct values
arm64: scripts/sorttable: Implement sorting mcount_loc at boot for arm64
