Each superblock contains a copy of the device item for that device. In a
transaction which drops a chunk but doesn't create any new ones, we were
correctly updating the device item in the chunk tree but not copying
over the new bytes_used value to the superblock.
This can be seen by doing the following:
# dd if=/dev/zero of=test bs=4096 count=2621440
# mkfs.btrfs test
# mount test /root/temp
# cd /root/temp
# for i in {00..10}; do dd if=/dev/zero of=$i bs=4096 count=32768; done
# sync
# rm *
# sync
# btrfs balance start -dusage=0 .
# sync
# cd
# umount /root/temp
# btrfs check test
For btrfs-check to detect this, you will also need my patch at
https://github.com/kdave/btrfs-progs/pull/991.
Change btrfs_remove_dev_extents() so that it adds the devices to the
fs_info->post_commit_list if they're not there already. This causes
btrfs_commit_device_sizes() to be called, which updates the bytes_used
value in the superblock.
Fixes: bbbf7243d6 ("btrfs: combine device update operations during transaction commit")
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add struct btrfs_space_info parameter to btrfs_make_block_group(), its
related functions and related struct. Passed space_info will have a new
block group.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function is introduced by commit a512bbf855 ("Btrfs: superblock
duplication") at the beginning of btrfs.
It leaved a comment saying we'd need a special mount option to read all
super blocks, but it's never been implemented and there was not
need/request for it. The check/rescue tools are able to start from a
specific copy and use it as primary eventually.
This means btrfs_read_dev_super() is always reading the first super
block, making all the code finding the latest super block unnecessary.
Just remove that function and replace all call sites with
btrfs_read_disk_super(bdev, 0, false).
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have two functions to read a super block from a block device:
- btrfs_read_dev_one_super()
Exported from disk-io.c
- btrfs_read_disk_super()
Local to volumes.c
And they have some minor differences:
- btrfs_read_dev_one_super() uses @copy_num
Meanwhile btrfs_read_disk_super() relies on the physical and expected
bytenr passed from the caller.
The parameter list of btrfs_read_dev_one_super() is more user
friendly.
- btrfs_read_disk_super() makes sure the label is NUL terminated
We do not need two different functions doing the same job, so merge the
behavior into btrfs_read_disk_super() by:
- Remove btrfs_read_dev_one_super()
- Export btrfs_read_disk_super()
The name pairs with btrfs_release_disk_super() perfectly.
- Change the parameter list of btrfs_read_disk_super() to mimic
btrfs_read_dev_one_super()
All existing callers are calculating the physical address and expect
bytenr before calling btrfs_read_disk_super() already.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have only two chunk allocation policies right now and the
switch/cases don't handle an unknown one properly. The error is in the
impossible category (the policy is stored only in memory), we don't have
to BUG(), falling back to regular policy should be safe.
Signed-off-by: David Sterba <dsterba@suse.com>
Both the variable and the parameter are used as logical indicators so
convert them to bool.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Old code has a lot of int for bool return values, bool is recommended
and done in new code. Convert the trivial cases that do simple 0/false
and 1/true. Functions comment are updated if needed.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Using the helper makes it a bit more clear that we're accessing the
first list entry.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The use of ASSERT(0) is maybe useful for some cases but more like a
notice for developers. Assertions can be compiled in independently so
convert it to a debugging helper.
The difference is that it's just a warning and will not end up in BUG().
The converted cases are in connection with proper error handling.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The file volumes.c has about 40 assertions and half of them are suitable
for ASSERT() with additional data.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These functions are exported so they should have a 'btrfs_' prefix by
convention, to make it clear they are btrfs specific and to avoid
collisions with functions from elsewhere in the kernel.
So add a 'btrfs_' prefix to their name to make it clear they are from
btrfs.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These functions are exported so they should have a 'btrfs_' prefix by
convention, to make it clear they are btrfs specific and to avoid
collisions with functions from elsewhere in the kernel.
So add a 'btrfs_' prefix to their name to make it clear they are from
btrfs.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is an exported function so it should have a 'btrfs_' prefix by
convention, to make it clear it's btrfs specific and to avoid collisions
with functions from elsewhere in the kernel.
So rename it to btrfs_set_extent_bit().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These functions are exported so they should have a 'btrfs_' prefix by
convention, to make it clear they are btrfs specific and to avoid
collisions with functions from elsewhere in the kernel. One of them has a
double underscore prefix which is also discouraged.
So remove double underscore prefix where applicable and add a 'btrfs_'
prefix to their name to make it clear they are from btrfs.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using __clear_extent_bit() we can use clear_extent_bits() since
we pass a NULL value for the cached and changeset arguments.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This reverts commit 7e06de7c83.
Commit 7e06de7c83 ("btrfs: canonicalize the device path before adding
it") tries to make btrfs to use "/dev/mapper/*" name first, then any
filename inside "/dev/" as the device path.
This is mostly fine when there is only the root namespace involved, but
when multiple namespace are involved, things can easily go wrong for the
d_path() usage.
As d_path() returns a file path that is namespace dependent, the
resulted string may not make any sense in another namespace.
Furthermore, the "/dev/" prefix checks itself is not reliable, one can
still make a valid initramfs without devtmpfs, and fill all needed
device nodes manually.
Overall the userspace has all its might to pass whatever device path for
mount, and we are not going to win the war trying to cover every corner
case.
So just revert that commit, and do no extra d_path() based file path
sanity check.
CC: stable@vger.kernel.org # 6.12+
Link: https://lore.kernel.org/linux-fsdevel/20250115185608.GA2223535@zen.localdomain/
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The btrfs_key is defined as objectid/type/offset and the keys are also
printed like that. For better readability, update all key
initializations to match this order.
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=v6KI
-----END PGP SIGNATURE-----
Merge tag 'for-6.14-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix leaked extent map after error when reading chunks
- replace use of deprecated strncpy
- in zoned mode, fixed range when ulocking extent range, causing a hang
* tag 'for-6.14-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix a leaked chunk map issue in read_one_chunk()
btrfs: replace deprecated strncpy() with strscpy()
btrfs: zoned: fix extent range end unlock in cow_file_range()
Add btrfs_free_chunk_map() to free the memory allocated
by btrfs_alloc_chunk_map() if btrfs_add_chunk_map() fails.
Fixes: 7dc66abb5a ("btrfs: use a dedicated data structure for chunk maps")
CC: stable@vger.kernel.org
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=4+6s
-----END PGP SIGNATURE-----
Merge tag 'for-6.14-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- extent map shrinker fixes:
- fix potential use after free accessing an inode to reach fs_info,
the shrinker could do iput() in the meantime
- skip unnecessary scanning of inodes without extent maps
- do direct iput(), no need for indirection via workqueue
- in block < page mode, fix race when extending i_size in buffered mode
- fix minor memory leak in selftests
- print descriptive error message when seeding device is not found
* tag 'for-6.14-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix data overwriting bug during buffered write when block size < page size
btrfs: output an error message if btrfs failed to find the seed fsid
btrfs: do regular iput instead of delayed iput during extent map shrinking
btrfs: skip inodes without loaded extent maps when shrinking extent maps
btrfs: fix use-after-free on inode when scanning root during em shrinking
btrfs: selftests: fix btrfs_test_delayed_refs() leak of transaction
[BUG]
If btrfs failed to locate the seed device for whatever reason, mounting
the sprouted device will fail without any meaning error message:
# mkfs.btrfs -f /dev/test/scratch1
# btrfstune -S1 /dev/test/scratch1
# mount /dev/test/scratch1 /mnt/btrfs
# btrfs dev add -f /dev/test/scratch2 /mnt/btrfs
# umount /mnt/btrfs
# btrfs dev scan -u
# btrfs mount /dev/test/scratch2 /mnt/btrfs
mount: /mnt/btrfs: fsconfig system call failed: No such file or directory.
dmesg(1) may have more information after failed mount system call.
# dmesg -t | tail -n6
BTRFS info (device dm-5): first mount of filesystem 64252ded-5953-4868-b962-cea48f7ac4ea
BTRFS info (device dm-5): using crc32c (crc32c-generic) checksum algorithm
BTRFS info (device dm-5): using free-space-tree
BTRFS error (device dm-5): failed to read chunk tree: -2
BTRFS error (device dm-5): open_ctree failed: -2
[CAUSE]
The failure to mount is pretty straight forward, just unable to find the
seed device and its fsid, caused by `btrfs dev scan -u`.
But the lack of any useful info is a problem.
[FIX]
Just add an extra error message in open_seed_devices() to indicate the
error.
Now the error message would look like this:
BTRFS info (device dm-4): first mount of filesystem 7769223d-4db1-4e4c-ac29-0a96f53576ab
BTRFS info (device dm-4): using crc32c (crc32c-generic) checksum algorithm
BTRFS info (device dm-4): using free-space-tree
BTRFS error (device dm-4): failed to find fsid e87c12e6-584b-4e98-8b88-962c33a619ff when attempting to open seed devices
BTRFS error (device dm-4): failed to read chunk tree: -2
BTRFS error (device dm-4): open_ctree failed: -2
Link: https://github.com/kdave/btrfs-progs/issues/959
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmeHvVQACgkQxWXV+ddt
WDsJ6w//cPqI8tf3kMxurZcG7clJRIIISotPrC6hm3UDNpJLa7HDaVJ50FAoIhMV
sB4RQNZky4mfB6ypXxmETzV3ZHvP0+oFgRs72Ommi0ZbdnBgxhaUTrDXLKl52o4r
UoeqvRKReEYOesN09rPXYPwytUOkxHU/GjNzv7bC/Tzvq/xKaIN5qMYZwkHtJ8PK
JtCFypfbmDPNDJz37l0BhRya2oMtpcUtxM9uP8RWVuQtaELgjcy56W/+osoyJTy9
FSKaoWUPsDVDufnILlGR8Kub2Z5mcISVqyARUdr/q3j5CDfyTdQvahmUy7sHgUAe
HGh5QBdRJu1QTvdZw+nK4YCaYpK6Nj4liDtO1cwVitde5RXsJrt6kYBLlY/kU2Qr
KODOloM/zVKxULR0ARl11NULZquUsczP6Wxfn+dtyDJ3JGlY9OcuESmorHoUtkMX
75Tj1AtRMNcfZAE2HquL1Oz3bIMcg4btDJsC+9Yp5K11SP12XpOwC42k/9Bx3iBe
Iki0BSuppFqX5MMY3OEWzD1pz2vOGYR8ISD6EIsjpjl2vBeRwydaCCZfuszSC7gl
Y4goSdwFMPVlqllL1h27XUjKVXvttCqqdB6P28MbvZKnFAPlm189BJQZC5cbHAJU
ceBww5PvI9QxnJnFG5iOLcnko6liUWPP9l2c5LLtUsJIi8B5Hu0=
=SXLv
-----END PGP SIGNATURE-----
Merge tag 'for-6.14-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"User visible changes, features:
- rebuilding of the free space tree at mount time is done in more
transactions, fix potential hangs when the transaction thread is
blocked due to large amount of block groups
- more read IO balancing strategies (experimental config), add two
new ways how to select a device for read if the profiles allow that
(all RAID1*), the current default selects the device by pid which
is good on average but less performant for single reader workloads
- select preferred device for all reads (namely for testing)
- round-robin, balance reads across devices relevant for the
requested IO range
- add encoded write ioctl support to io_uring (read was added in
6.12), basis for writing send stream using that instead of
syscalls, non-blocking mode is not yet implemented
- support FS_IOC_READ_VERITY_METADATA, applications can use the
metadata to do their own verification
- pass inode's i_write_hint to bios, for parity with other
filesystems, ioctls F_GET_RW_HINT/F_SET_RW_HINT
Core:
- in zoned mode: allow to directly reclaim a block group by simply
resetting it, then it can be reused and another block group does
not need to be allocated
- super block validation now also does more comprehensive sys array
validation, adding it to the points where superblock is validated
(post-read, pre-write)
- subpage mode fixes:
- fix double accounting of blocks due to some races
- improved or fixed error handling in a few cases (compression,
delalloc)
- raid stripe tree:
- fix various cases with extent range splitting or deleting
- implement hole punching to extent range
- reduce number of stripe tree lookups during bio submission
- more self-tests
- updated self-tests (delayed refs)
- error handling improvements
- cleanups, refactoring
- remove rest of backref caching infrastructure from relocation,
not needed anymore
- error message updates
- remove unnecessary calls when extent buffer was marked dirty
- unused parameter removal
- code moved to new files
Other code changes: add rb_find_add_cached() to the rb-tree API"
* tag 'for-6.14-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (127 commits)
btrfs: selftests: add a selftest for deleting two out of three extents
btrfs: selftests: add test for punching a hole into 3 RAID stripe-extents
btrfs: selftests: add selftest for punching holes into the RAID stripe extents
btrfs: selftests: test RAID stripe-tree deletion spanning two items
btrfs: selftests: don't split RAID extents in half
btrfs: selftests: check for correct return value of failed lookup
btrfs: don't use btrfs_set_item_key_safe on RAID stripe-extents
btrfs: implement hole punching for RAID stripe extents
btrfs: fix deletion of a range spanning parts two RAID stripe extents
btrfs: fix tail delete of RAID stripe-extents
btrfs: fix front delete range calculation for RAID stripe extents
btrfs: assert RAID stripe-extent length is always greater than 0
btrfs: don't try to delete RAID stripe-extents if we don't need to
btrfs: selftests: correct RAID stripe-tree feature flag setting
btrfs: add io_uring interface for encoded writes
btrfs: remove the unused locked_folio parameter from btrfs_cleanup_ordered_extents()
btrfs: add extra error messages for delalloc range related errors
btrfs: subpage: dump the involved bitmap when ASSERT() failed
btrfs: subpage: fix the bitmap dump of the locked flags
btrfs: do proper folio cleanup when run_delalloc_nocow() failed
...
Inside function get_canonical_dev_path(), we call d_path() to get the
final device path.
But d_path() can return error, and in that case the next strscpy() call
will trigger an invalid memory access.
Add back the missing error handling for d_path().
Reported-by: Boris Burkov <boris@bur.io>
Fixes: 7e06de7c83 ("btrfs: canonicalize the device path before adding it")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For testing purposes allow to configure the read policy via module
parameter from the beginning. Available only with CONFIG_BTRFS_EXPERIMENTAL
Examples:
- Set the RAID1 balancing method to round-robin with a custom
min_contig_read of 4k:
$ modprobe btrfs read_policy=round-robin:4096
- Set the round-robin balancing method with the default
min_contiguous_read:
$ modprobe btrfs read_policy=round-robin
- Set the "devid" balancing method, defaulting to the latest device:
$ modprobe btrfs read_policy=devid
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add read policy that will force all reads to go to the given device
(specified by devid) on the RAID1 profiles.
This will be used for testing, e.g. to read from stale device. Users may
find other use cases.
Can be set in sysfs, the value format is "devid:<devid>" to the file
/sys/fs/btrfs/FSID/read_policy
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add round-robin read policy that balances reads over available devices
(all RAID1 block group profiles). Switch to the next devices is done
after a number of blocks is read, which is 256K by default and is
configurable in sysfs.
The format is "round-robin:<min-contig-read>" and can be set in file
/sys/fs/btrfs/FSID/read_policy
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, fs_devices->fs_info is initialized in btrfs_init_devices_late(),
but this occurs too late for find_live_mirror(), which is invoked by
load_super_root() much earlier than btrfs_init_devices_late().
Fix this by moving the initialization to open_ctree(), before load_super_root().
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have several places explicitly calling btrfs_mark_buffer_dirty() but
that is not necessarily since the target leaf came from a path that was
obtained for a btree search function that modifies the btree, something
like btrfs_insert_empty_item() or anything else that ends up calling
btrfs_search_slot() with a value of 1 for its 'cow' argument.
These just make the code more verbose, confusing and add a little extra
overhead and well as increase the module's text size, so remove them.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_validate_super() only does a very basic check on the
array chunk size (not too large than the available space, but not too
small to contain no chunk).
The more comprehensive checks (the regular chunk checks and size check
inside the system chunk array) are all done inside btrfs_read_sys_array().
It's not a big deal, but it also means we do not do any validation on
the system chunk array at super block writeback time either.
Do the following modification to centralize the system chunk array
checks into btrfs_validate_super():
- Make chunk_err() helper accept stack chunk pointer
If @leaf parameter is NULL, then the @chunk pointer will be a pointer
to the chunk item, other than the offset inside the leaf.
And since @leaf can be NULL, add a new @fs_info parameter for that
case.
- Make btrfs_check_chunk_valid() handle stack chunk pointer
The same as chunk_err(), a new @fs_info parameter, and if @leaf is
NULL, then @chunk will be a pointer to a stack chunk.
If @chunk is NULL, then all needed btrfs_chunk members will be read
using the stack helper instead of the leaf helper.
This means we need to read out all the needed member at the beginning
of the function.
Furthermore, at super block read time, fs_info->sectorsize is not yet
initialized, we need one extra @sectorsize parameter to grab the
correct sectorsize.
- Introduce a helper validate_sys_chunk_array()
* Validate the disk key.
* Validate the size before we access the full chunk items.
* Do the full chunk item validation.
- Call validate_sys_chunk_array() at btrfs_validate_super()
- Simplify the checks inside btrfs_read_sys_array()
Now the checks will be converted to an ASSERT().
- Simplify the checks inside read_one_chunk()
Now that all chunk items inside system chunk array and chunk tree are
verified, there is no need to verify them again inside read_one_chunk().
This change has the following advantages:
- More comprehensive checks at write time
And unlike the sys_chunk_array read routine, this time we do not need
to allocate a dummy extent buffer to do the check.
All the checks done here require no new memory allocation.
- Slightly improved readability when iterating the system chunk array
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update btrfs_add_chunk_map() to use rb_find_add_cached().
Signed-off-by: Roger L. Beckermeyer III <beckerlee3@gmail.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have 3 functions that have their prototypes declared in ctree.h but
they are defined at extent-tree.c and they are unrelated to the btree
data structure. Move the prototypes out of ctree.h and into extent-tree.h.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we have the stripe tree decision saved in struct
btrfs_io_geometry we can pass it into is_single_device_io() and get rid of
another call to btrfs_need_raid_stripe_tree_update().
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Cache the decision if a particular I/O needs to update RAID stripe tree
entries in struct btrfs_io_context.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Cache the return of btrfs_need_stripe_tree_update() in struct
btrfs_io_geometry starting from btrfs_map_block().
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If you follow the seed/sprout wiki, it suggests the following workflow:
btrfstune -S 1 seed_dev
mount seed_dev mnt
btrfs device add sprout_dev
mount -o remount,rw mnt
The first mount mounts the FS readonly, which results in not setting
BTRFS_FS_OPEN, and setting the readonly bit on the sb. The device add
somewhat surprisingly clears the readonly bit on the sb (though the
mount is still practically readonly, from the users perspective...).
Finally, the remount checks the readonly bit on the sb against the flag
and sees no change, so it does not run the code intended to run on
ro->rw transitions, leaving BTRFS_FS_OPEN unset.
As a result, when the cleaner_kthread runs, it sees no BTRFS_FS_OPEN and
does no work. This results in leaking deleted snapshots until we run out
of space.
I propose fixing it at the first departure from what feels reasonable:
when we clear the readonly bit on the sb during device add.
A new fstest I have written reproduces the bug and confirms the fix.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_is_parity_mirror() has been unused since commit 4886ff7b50
("btrfs: introduce a new helper to submit write bio for repair").
Remove it as the code was refactored and we don't need the helper
anymore.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add first stash of very basic self tests for the RAID stripe-tree.
More test cases will follow exercising the tree.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[PROBLEM]
Currently btrfs accepts any file path for its device, resulting some
weird situation:
# ./mount_by_fd /dev/test/scratch1 /mnt/btrfs/
The program has the following source code:
#include <fcntl.h>
#include <stdio.h>
#include <sys/mount.h>
int main(int argc, char *argv[]) {
int fd = open(argv[1], O_RDWR);
char path[256];
snprintf(path, sizeof(path), "/proc/self/fd/%d", fd);
return mount(path, argv[2], "btrfs", 0, NULL);
}
Then we can have the following weird device path:
BTRFS: device fsid 2378be81-fe12-46d2-a9e8-68cf08dd98d5 devid 1 transid 7 /proc/self/fd/3 (253:2) scanned by mount_by_fd (18440)
Normally it's not a big deal, and later udev can trigger a device path
rename. But if udev didn't trigger, the device path "/proc/self/fd/3"
will show up in mtab.
[CAUSE]
For filename "/proc/self/fd/3", it means the opened file descriptor 3.
In above case, it's exactly the device we want to open, aka points to
"/dev/test/scratch1" which is another symlink pointing to "/dev/dm-2".
Inside kernel we solve the mount source using LOOKUP_FOLLOW, which
follows the symbolic link and grab the proper block device.
But inside btrfs we also save the filename into btrfs_device::name, and
utilize that member to report our mount source, which leads to the above
situation.
[FIX]
Instead of unconditionally trust the path, check if the original file
(not following the symbolic link) is inside "/dev/", if not, then
manually lookup the path to its final destination, and use that as our
device path.
This allows us to still use symbolic links, like
"/dev/mapper/test-scratch" from LVM2, which is required for fstests runs
with LVM2 setup.
And for really weird names, like the above case, we solve it to
"/dev/dm-2" instead.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1230641
Reported-by: Fabian Vogt <fvogt@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[PROBLEM]
It is very common for udev to trigger device scan, and every time a
mounted btrfs device got re-scan from different soft links, we will get
some of unnecessary device path updates, this is especially common
for LVM based storage:
# lvs
scratch1 test -wi-ao---- 10.00g
scratch2 test -wi-a----- 10.00g
scratch3 test -wi-a----- 10.00g
scratch4 test -wi-a----- 10.00g
scratch5 test -wi-a----- 10.00g
test test -wi-a----- 10.00g
# mkfs.btrfs -f /dev/test/scratch1
# mount /dev/test/scratch1 /mnt/btrfs
# dmesg -c
[ 205.705234] BTRFS: device fsid 7be2602f-9e35-4ecf-a6ff-9e91d2c182c9 devid 1 transid 6 /dev/mapper/test-scratch1 (253:4) scanned by mount (1154)
[ 205.710864] BTRFS info (device dm-4): first mount of filesystem 7be2602f-9e35-4ecf-a6ff-9e91d2c182c9
[ 205.711923] BTRFS info (device dm-4): using crc32c (crc32c-intel) checksum algorithm
[ 205.713856] BTRFS info (device dm-4): using free-space-tree
[ 205.722324] BTRFS info (device dm-4): checking UUID tree
So far so good, but even if we just touched any soft link of
"dm-4", we will get quite some unnecessary device path updates.
# touch /dev/mapper/test-scratch1
# dmesg -c
[ 469.295796] BTRFS info: devid 1 device path /dev/mapper/test-scratch1 changed to /dev/dm-4 scanned by (udev-worker) (1221)
[ 469.300494] BTRFS info: devid 1 device path /dev/dm-4 changed to /dev/mapper/test-scratch1 scanned by (udev-worker) (1221)
Such device path rename is unnecessary and can lead to random path
change due to the udev race.
[CAUSE]
Inside device_list_add(), we are using a very primitive way checking if
the device has changed, strcmp().
Which can never handle links well, no matter if it's hard or soft links.
So every different link of the same device will be treated as a different
device, causing the unnecessary device path update.
[FIX]
Introduce a helper, is_same_device(), and use path_equal() to properly
detect the same block device.
So that the different soft links won't trigger the rename race.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1230641
Reported-by: Fabian Vogt <fvogt@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Mounting btrfs from two images (which have the same one fsid and two
different dev_uuids) in certain executing order may trigger an UAF for
variable 'device->bdev_file' in __btrfs_free_extra_devids(). And
following are the details:
1. Attach image_1 to loop0, attach image_2 to loop1, and scan btrfs
devices by ioctl(BTRFS_IOC_SCAN_DEV):
/ btrfs_device_1 → loop0
fs_device
\ btrfs_device_2 → loop1
2. mount /dev/loop0 /mnt
btrfs_open_devices
btrfs_device_1->bdev_file = btrfs_get_bdev_and_sb(loop0)
btrfs_device_2->bdev_file = btrfs_get_bdev_and_sb(loop1)
btrfs_fill_super
open_ctree
fail: btrfs_close_devices // -ENOMEM
btrfs_close_bdev(btrfs_device_1)
fput(btrfs_device_1->bdev_file)
// btrfs_device_1->bdev_file is freed
btrfs_close_bdev(btrfs_device_2)
fput(btrfs_device_2->bdev_file)
3. mount /dev/loop1 /mnt
btrfs_open_devices
btrfs_get_bdev_and_sb(&bdev_file)
// EIO, btrfs_device_1->bdev_file is not assigned,
// which points to a freed memory area
btrfs_device_2->bdev_file = btrfs_get_bdev_and_sb(loop1)
btrfs_fill_super
open_ctree
btrfs_free_extra_devids
if (btrfs_device_1->bdev_file)
fput(btrfs_device_1->bdev_file) // UAF !
Fix it by setting 'device->bdev_file' as 'NULL' after closing the
btrfs_device in btrfs_close_one_device().
Fixes: 1423881941 ("btrfs: do not background blkdev_put()")
CC: stable@vger.kernel.org # 4.19+
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219408
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we're calling btrfs_num_copies() before btrfs_get_chunk_map() in
btrfs_map_block(). But btrfs_num_copies() itself does a chunk map lookup
to be able to calculate the number of copies.
So split out the code getting the number of copies from btrfs_num_copies()
into a helper called btrfs_chunk_map_num_copies() and directly call it
from btrfs_map_block() and btrfs_num_copies().
This saves us one rbtree lookup per btrfs_map_block() invocation.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[ENHANCEMENT]
When mounting a btrfs filesystem, the filesystem opens the block device,
and if this fails, there is no message about it. Print a message about
it to help debugging.
[TEST]
I have a btrfs filesystem on three block devices, one of which is
write-protected, so regular mounts fail, but there is no message in
dmesg.
/dev/vdb normal
/dev/vdc write protected
/dev/vdd normal
Before patch:
$ sudo mount /dev/vdb /mnt/
mount: mount(2) failed: no such file or directory
$ sudo dmesg # Show only messages about missing block devices
....
[ 352.947196] BTRFS error (device vdb): devid 2 uuid 4ee2c625-a3b2-4fe0-b411-756b23e08533 missing
....
After patch:
$ sudo mount /dev/vdb /mnt/
mount: mount(2) failed: no such file or directory
$ sudo dmesg # Show bdev_file_open_by_path failed.
....
[ 352.944328] BTRFS error: failed to open device for path /dev/vdc with flags 0x3: -13
[ 352.947196] BTRFS error (device vdb): missing devid 2 uuid 4ee2c625-a3b2-4fe0-b411-756b23e08533
....
Signed-off-by: Li Zhang <zhanglikernel@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Functions btrfs_uuid_scan_kthread() and btrfs_create_uuid_tree() are for
UUID tree rescan and creation, it's not suitable for volumes.[ch].
Move them to uuid-tree.[ch] instead.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The errors during removing a chunk item are fatal, we expect to have a
matching item in the chunk map from which the chunk_offset is taken.
Handle that by transaction abort.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can add const to many parameters, this is for clarity and minor
addition to safety. There are some minor effects, in the assembly
code and .ko measured on release config. This patch does not cover all
possible conversions.
Signed-off-by: David Sterba <dsterba@suse.com>
We've started to use for-loop local variables and in a few places this
shadows a function variable. Convert a few cases reported by 'make W=2'.
If applicable also change the style to post-increment, that's the
preferred one.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Drop the single-use variable bytenr_orig and instead use btrfs_sb_offset()
in the function argument passing.
Fix a stale comment about not automatically fixing a bad primary
superblock from the backup mirror copies. Also, move the comment closer
to where the primary superblock read occurs.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Passing in a 'struct btrfs_io_geometry into handle_ops_on_dev_replace
can reduce the number of arguments by two.
No functional changes otherwise.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
