In error paths, we could unref the submit without calling
drm_sched_entity_push_job(), so msm_job_free() will never get
called. Since drm_sched_job_cleanup() will NULL out the
s_fence, we can use that to detect this case.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/653584/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
When changing the condition from >= SZ_64K, it was changed to <= SZ_64K.
This disallows migration of 64K, which is the exact minimum allowed.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5057
Fixes: 794f5493f5 ("drm/xe: Strict migration policy for atomic SVM faults")
Cc: stable@vger.kernel.org
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Link: https://lore.kernel.org/r/20250521090102.2965100-1-dev@lankhorst.se
(cherry picked from commit 531bef26d1)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Driver unconditionally saves current state on first init in
dsi_pll_10nm_init(), but does not save the VCO rate, only some of the
divider registers. The state is then restored during probe/enable via
msm_dsi_phy_enable() -> msm_dsi_phy_pll_restore_state() ->
dsi_10nm_pll_restore_state().
Restoring calls dsi_pll_10nm_vco_set_rate() with
pll_10nm->vco_current_rate=0, which basically overwrites existing rate of
VCO and messes with clock hierarchy, by setting frequency to 0 to clock
tree. This makes anyway little sense - VCO rate was not saved, so
should not be restored.
If PLL was not configured configure it to minimum rate to avoid glitches
and configuring entire in clock hierarchy to 0 Hz.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/sz4kbwy5nwsebgf64ia7uq4ee7wbsa5uy3xmlqwcstsbntzcov@ew3dcyjdzmi2/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Fixes: a4ccc37693 ("drm/msm/dsi_pll_10nm: restore VCO rate during
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/654796/
Link: https://lore.kernel.org/r/20250520111325.92352-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
When widebus was enabled for DisplayPort in commit c7c4122026
("drm/msm/dp: enable widebus on all relevant chipsets") it was clarified
that it is only supported on DPU 5.0.0 onwards which includes SC7180 on
DPU revision 6.2. However, this patch missed that the description
structure for SC7180 is also reused for SDM845 (because of identical
io_start address) which is only DPU 4.0.0, leading to a wrongly enbled
widebus feature and corruption on that platform.
Create a separate msm_dp_desc_sdm845 structure for this SoC compatible,
with the wide_bus_supported flag turned off.
Fixes: c7c4122026 ("drm/msm/dp: enable widebus on all relevant chipsets")
Signed-off-by: James A. MacInnes <james.a.macinnes@gmail.com>
[DB: reworded commit text following Marijn's suggestion]
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/636944/
Link: https://lore.kernel.org/r/20250212-sdm845_dp-v2-1-4954e51458f4@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Fixes: cd3c62282b ("drm/nouveau/gsp: add usermode class id to gpu hal")
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20250603061027.1310267-1-nichen@iscas.ac.cn
- A couple of vm init fixes (Matt Auld)
- Hwmon fixes (Karthik)
- Drop reduntant conversion to bool (Raag)
- Fix CONFIG_INTEL_VSEC dependency (Arnd)
- Rework eviction rejection of bound external bos (Thomas)
- Stop re-submitting signalled jobs (Matt Auld)
- A couple of pxp fixes (Daniele)
- Add back a fix that got lost in a merge (Matt Auld)
- Create LRC bo without VM (Niranjana)
- Fix for the above fix (Maciej)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCaEHpLAAKCRC4FpNVCsYG
v94QAQCECvLESR1cSyrP/TdIf67x9l2IpNgBKIjrgmF3RAV5agD/VALTsfkTVu7m
ldfuG7whfePPP9Hkkw+HjsDGJMuC1AQ=
=cOlw
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-fixes-2025-06-05' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
- A couple of vm init fixes (Matt Auld)
- Hwmon fixes (Karthik)
- Drop reduntant conversion to bool (Raag)
- Fix CONFIG_INTEL_VSEC dependency (Arnd)
- Rework eviction rejection of bound external bos (Thomas)
- Stop re-submitting signalled jobs (Matt Auld)
- A couple of pxp fixes (Daniele)
- Add back a fix that got lost in a merge (Matt Auld)
- Create LRC bo without VM (Niranjana)
- Fix for the above fix (Maciej)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/aEHq44uIAZwfK-mG@fedora
There is unmatched xe_vm_unlock() in the __xe_exec_queue_init().
Leftover from commit fbeaad071a ("drm/xe: Create LRC BO without VM")
Fixes: 2b0a0ce0c2 ("drm/xe: Create LRC BO without VM")
Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://lore.kernel.org/r/20250530135627.2821612-1-maciej.patelczyk@intel.com
(cherry picked from commit 28b996ce73)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Specifying VM during lrc->bo creation requires VM's reference
to be held for the lifetime of lrc->bo as it will use VM's dma
reservation object. Using VM's dma reservation object for
lrc->bo doesn't provide any advantage. Hence do not pass VM
while creating lrc->bo.
v2: Use xe_bo_unpin_map_no_vm (Matthew Brost)
Fixes: 264eecdba2 ("drm/xe: Decouple xe_exec_queue and xe_lrc")
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250529052031.2429120-2-niranjana.vishwanathapura@intel.com
(cherry picked from commit fbeaad071a)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Daniele noticed that the fix in commit 2d2be279f1 ("drm/xe: fix UAF
around queue destruction") looks to have been unintentionally removed as
part of handling a conflict in some past merge commit. Add it back.
Fixes: ac44ff7cec ("Merge tag 'drm-xe-fixes-2024-10-10' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes")
Reported-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.12+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250603174213.1543579-2-matthew.auld@intel.com
(cherry picked from commit 9d9fca62dc)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The expected flow of operations when using PXP is to query the PXP
status and wait for it to transition to "ready" before attempting to
create an exec_queue. This flow is followed by the Mesa driver, but
there is no guarantee that an incorrectly coded (or malicious) app
will not attempt to create the queue first without querying the status.
Therefore, we need to clarify what the expected behavior of the queue
creation ioctl is in this scenario.
Currently, the ioctl always fails with an -EBUSY code no matter the
error, but for consistency it is better to distinguish between "failed
to init" (-EIO) and "not ready" (-EBUSY), the same way the query ioctl
does. Note that, while this is a change in the return code of an ioctl,
the behavior of the ioctl in this particular corner case was not clearly
spec'd, so no one should have been relying on it (and we know that Mesa,
which is the only known userspace for this, didn't).
v2: Minor rework of the doc (Rodrigo)
Fixes: 72d479601d ("drm/xe/pxp/uapi: Add userspace and LRC support for PXP-using queues")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250522225401.3953243-7-daniele.ceraolospurio@intel.com
(cherry picked from commit 21784ca960)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The define of the extension type was accidentally used instead of the
one of the property itself. They're both zero, so no functional issue,
but we should use the correct define for code correctness.
Fixes: 41a97c4a12 ("drm/xe/pxp/uapi: Add API to mark a BO as using PXP")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250522225401.3953243-6-daniele.ceraolospurio@intel.com
(cherry picked from commit 1d891ee820)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Customer is reporting a really subtle issue where we get random DMAR
faults, hangs and other nasties for kernel migration jobs when stressing
stuff like s2idle/s3/s4. The explosions seems to happen somewhere
after resuming the system with splats looking something like:
PM: suspend exit
rfkill: input handler disabled
xe 0000:00:02.0: [drm] GT0: Engine reset: engine_class=bcs, logical_mask: 0x2, guc_id=0
xe 0000:00:02.0: [drm] GT0: Timedout job: seqno=24496, lrc_seqno=24496, guc_id=0, flags=0x13 in no process [-1]
xe 0000:00:02.0: [drm] GT0: Kernel-submitted job timed out
The likely cause appears to be a race between suspend cancelling the
worker that processes the free_job()'s, such that we still have pending
jobs to be freed after the cancel. Following from this, on resume the
pending_list will now contain at least one already complete job, but it
looks like we call drm_sched_resubmit_jobs(), which will then call
run_job() on everything still on the pending_list. But if the job was
already complete, then all the resources tied to the job, like the bb
itself, any memory that is being accessed, the iommu mappings etc. might
be long gone since those are usually tied to the fence signalling.
This scenario can be seen in ftrace when running a slightly modified
xe_pm IGT (kernel was only modified to inject artificial latency into
free_job to make the race easier to hit):
xe_sched_job_run: dev=0000:00:02.0, fence=0xffff888276cc8540, seqno=0, lrc_seqno=0, gt=0, guc_id=0, batch_addr=0x000000146910 ...
xe_exec_queue_stop: dev=0000:00:02.0, 3:0x2, gt=0, width=1, guc_id=0, guc_state=0x0, flags=0x13
xe_exec_queue_stop: dev=0000:00:02.0, 3:0x2, gt=0, width=1, guc_id=1, guc_state=0x0, flags=0x4
xe_exec_queue_stop: dev=0000:00:02.0, 4:0x1, gt=1, width=1, guc_id=0, guc_state=0x0, flags=0x3
xe_exec_queue_stop: dev=0000:00:02.0, 1:0x1, gt=1, width=1, guc_id=1, guc_state=0x0, flags=0x3
xe_exec_queue_stop: dev=0000:00:02.0, 4:0x1, gt=1, width=1, guc_id=2, guc_state=0x0, flags=0x3
xe_exec_queue_resubmit: dev=0000:00:02.0, 3:0x2, gt=0, width=1, guc_id=0, guc_state=0x0, flags=0x13
xe_sched_job_run: dev=0000:00:02.0, fence=0xffff888276cc8540, seqno=0, lrc_seqno=0, gt=0, guc_id=0, batch_addr=0x000000146910 ...
.....
xe_exec_queue_memory_cat_error: dev=0000:00:02.0, 3:0x2, gt=0, width=1, guc_id=0, guc_state=0x3, flags=0x13
So the job_run() is clearly triggered twice for the same job, even
though the first must have already signalled to completion during
suspend. We can also see a CAT error after the re-submit.
To prevent this only resubmit jobs on the pending_list that have not yet
signalled.
v2:
- Make sure to re-arm the fence callbacks with sched_start().
v3 (Matt B):
- Stop using drm_sched_resubmit_jobs(), which appears to be deprecated
and just open-code a simple loop such that we skip calling run_job()
on anything already signalled.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4856
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: William Tseng <william.tseng@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://lore.kernel.org/r/20250528113328.289392-2-matthew.auld@intel.com
(cherry picked from commit 38fafa9f39)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
For preempt_fence mode VM's we're rejecting eviction of
shared bos during VM_BIND. However, since we do this in the
move() callback, we're getting an eviction failure warning from
TTM. The TTM callback intended for these things is
eviction_valuable().
However, the latter doesn't pass in the struct ttm_operation_ctx
needed to determine whether the caller needs this.
Instead, attach the needed information to the vm under the
vm->resv, until we've been able to update TTM to provide the
needed information. And add sufficient lockdep checks to prevent
misuse and races.
v2:
- Fix a copy-paste error in xe_vm_clear_validating()
v3:
- Fix kerneldoc errors.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: 0af944f0e3 ("drm/xe: Reject BO eviction if BO is bound to current VM")
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250528164105.234718-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 9d5558649f)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The XE driver can be built with or without VSEC support, but fails to link as
built-in if vsec is in a loadable module:
x86_64-linux-ld: vmlinux.o: in function `xe_vsec_init':
(.text+0x1e83e16): undefined reference to `intel_vsec_register'
The normal fix for this is to add a 'depends on INTEL_VSEC || !INTEL_VSEC',
forcing XE to be a loadable module as well, but that causes a circular
dependency:
symbol DRM_XE depends on INTEL_VSEC
symbol INTEL_VSEC depends on X86_PLATFORM_DEVICES
symbol X86_PLATFORM_DEVICES is selected by DRM_XE
The problem here is selecting a symbol from another subsystem, so change
that as well and rephrase the 'select' into the corresponding dependency.
Since X86_PLATFORM_DEVICES is 'default y', there is no change to
defconfig builds here.
Fixes: 0c45e76fcc ("drm/xe/vsec: Support BMG devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250529172355.2395634-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit e4931f8be3)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Move power2/curr2_crit to channel 1 i.e power1/curr1_crit as this
represents the entire card critical power/current.
v2: Update the date of curr1_crit also in hwmon documentation.
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Fixes: 345dadc4f6 ("drm/xe/hwmon: Add infra to support card power and energy attributes")
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://lore.kernel.org/r/20250529163458.2354509-3-karthik.poosa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 25e963a09e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Add support to manage power limits using pcode mailbox commands
for supported platforms.
v2:
- Address review comments. (Badal)
- Use mailbox commands instead of registers to manage power limits
for BMG.
- Clamp the maximum power limit to GPU firmware default value.
v3:
- Clamp power limit in write also for platforms with mailbox support.
v4:
- Remove unnecessary debug prints. (Badal)
v5:
- Update description of variable pl1_on_boot to fix kernel-doc error.
v6:
- Improve commit message, refer to BIOS as GPU firmware.
- Change macro READ_PL_FROM_BIOS to READ_PL_FROM_FW.
- Rectify drm_warn to drm_info.
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Fixes: e90f7a58e6 ("drm/xe/hwmon: Add HWMON support for BMG")
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://lore.kernel.org/r/20250529163458.2354509-2-karthik.poosa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 7596d839f6)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
In xe_vm_close_and_put() we need to be able to call xe_svm_fini(),
however during vm creation we can call this on the error path, before
having actually initialised the svm state, leading to various splats
followed by a fatal NPD.
Fixes: 6fd979c2f3 ("drm/xe: Add SVM init / close / fini to faulting VMs")
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4967
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250514152424.149591-4-matthew.auld@intel.com
(cherry picked from commit 4f296d77cf)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
In xe_vm_close_and_put() we need to be able to call
flush_work(rebind_work), however during vm creation we can call this on
the error path, before having actually set up the worker, leading to a
splat from flush_work().
It looks like we can simply move the worker init step earlier to fix
this.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250514152424.149591-3-matthew.auld@intel.com
(cherry picked from commit 96af397aa1)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The panel lacked the connector type which causes a warning. Adding the
connector type reveals wrong bus_flags and bits per pixel. Fix all of
it.
Fixes: 1319f2178b ("drm/panel-simple: add Evervision VGG644804 panel entry")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250520074110.655114-1-mwalle@kernel.org
-----BEGIN PGP SIGNATURE-----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=eWJw
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Print the actual delay time in pci_bridge_wait_for_secondary_bus()
instead of assuming it was 1000ms (Wilfred Mallawa)
- Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
devices', which broke resume from system sleep on AMD platforms and
has been fixed by other commits (Lukas Wunner)
Resource management:
- Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated
and unnecessary (Philipp Stanner)
- Remove pcim_iounmap_regions() and pcim_request_region_exclusive()
and related flags since all uses have been removed (Philipp
Stanner)
- Rework devres 'request' functions so they are no longer 'hybrid',
i.e., their behavior no longer depends on whether
pcim_enable_device or pci_enable_device() was used, and remove
related code (Philipp Stanner)
- Warn (not BUG()) about failure to assign optional resources (Ilpo
Järvinen)
Error handling:
- Log the DPC Error Source ID only when it's actually valid (when
ERR_FATAL or ERR_NONFATAL was received from a downstream device)
and decode into bus/device/function (Bjorn Helgaas)
- Determine AER log level once and save it so all related messages
use the same level (Karolina Stolarek)
- Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable
Errors (Karolina Stolarek)
- Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs
controls on interval and burst count, to avoid flooding logs and
RCU stall warnings (Jon Pan-Doh)
Power management:
- Increment PM usage counter when probing reset methods so we don't
try to read config space of a powered-off device (Alex Williamson)
- Set all devices to D0 during enumeration to ensure ACPI opregion is
connected via _REG (Mario Limonciello)
Power control:
- Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match
the filename paths. Retain old deprecated symbols for
compatibility, except for the pwrctrl slot driver
(PCI_PWRCTRL_SLOT) (Johan Hovold)
- When unregistering pwrctrl, cancel outstanding rescan work before
cleaning up data structures to avoid use-after-free issues (Brian
Norris)
Bandwidth control:
- Simplify link bandwidth controller by replacing the count of Link
Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN
flag (Ilpo Järvinen)
- Update the Link Speed after retraining, since the Link Speed may
have changed (Ilpo Järvinen)
PCIe native device hotplug:
- Ignore Presence Detect Changed caused by DPC.
pciehp already ignores Link Down/Up events caused by DPC, but on
slots using in-band presence detect, DPC causes a spurious Presence
Detect Changed event (Lukas Wunner)
- Ignore Link Down/Up caused by Secondary Bus Reset.
On hotplug ports using in-band presence detect, the reset causes a
Presence Detect Changed event, which mistakenly caused teardown and
re-enumeration of the device. Drivers may need to annotate code
that resets their device (Lukas Wunner)
Virtualization:
- Add an ACS quirk for Loongson Root Ports that don't advertise ACS
but don't allow peer-to-peer transactions between Root Ports; the
quirk allows each Root Port to be in a separate IOMMU group (Huacai
Chen)
Endpoint framework:
- For fixed-size BARs, retain both the actual size and the possibly
larger size allocated to accommodate iATU alignment requirements
(Jerome Brunet)
- Simplify ctrl/SPAD space allocation and avoid allocating more space
than needed (Jerome Brunet)
- Correct MSI-X PBA offset calculations for DesignWare and Cadence
endpoint controllers (Niklas Cassel)
- Align the return value (number of interrupts) encoding for
pci_epc_get_msi()/pci_epc_ops::get_msi() and
pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)
- Align the nr_irqs parameter encoding for
pci_epc_set_msi()/pci_epc_ops::set_msi() and
pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)
Common host controller library:
- Convert pci-host-common to a library so platforms that don't need
native host controller drivers don't need to include these helper
functions (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Extract ECAM bridge creation helper from pci_host_common_probe() to
separate driver-specific things like MSI from PCI things (Marc
Zyngier)
- Dynamically allocate RID-to_SID bitmap to prepare for SoCs with
varying capabilities (Marc Zyngier)
- Skip ports disabled in DT when setting up ports (Janne Grunau)
- Add t6020 compatible string (Alyssa Rosenzweig)
- Add T602x PCIe support (Hector Martin)
- Directly set/clear INTx mask bits because T602x dropped the
accessors that could do this without locking (Marc Zyngier)
- Move port PHY registers to their own reg items to accommodate
T602x, which moves them around; retain default offsets for existing
DTs that lack phy%d entries with the reg offsets (Hector Martin)
- Stop polling for core refclk, which doesn't work on T602x and the
bootloader has already done anyway (Hector Martin)
- Use gpiod_set_value_cansleep() when asserting PERST# in probe
because we're allowed to sleep there (Hector Martin)
Cadence PCIe controller driver:
- Drop a runtime PM 'put' to resolve a runtime atomic count underflow
(Hans Zhang)
- Make the cadence core buildable as a module (Kishon Vijay Abraham I)
- Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
loadable drivers when they are removed (Siddharth Vadapalli)
Freescale i.MX6 PCIe controller driver:
- Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP
(Richard Zhu)
- Remove redundant dw_pcie_wait_for_link() from
imx_pcie_start_link(); since the DWC core does this, imx6 only
needs it when retraining for a faster link speed (Richard Zhu)
- Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)
- Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in
some cases, the controller can't exit 'L23 Ready' through Beacon or
PERST# deassertion (Richard Zhu)
- Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8
GT/s, causing timeouts in L1 (Richard Zhu)
- Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)
- Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)
Mobiveil PCIe controller driver:
- Return bool (not int) for link-up check in
mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans
Zhang)
NVIDIA Tegra194 PCIe controller driver:
- Create debugfs directory for 'aspm_state_cnt' only when
CONFIG_PCIEASPM is enabled, since there are no other entries (Hans
Zhang)
Qualcomm PCIe controller driver:
- Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
equalization presets (Krishna Chaitanya Chundru)
- Read Maximum Link Width from the Link Capabilities register if DT
lacks 'num-lanes' property (Krishna Chaitanya Chundru)
- Add Physical Layer 64 GT/s Capability ID and register offsets for
8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya
Chundru)
- Add generic dwc support for configuring lane equalization presets
(Krishna Chaitanya Chundru)
- Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)
Renesas R-Car PCIe controller driver:
- Describe endpoint BAR 4 as being fixed size (Jerome Brunet)
- Document how to obtain R-Car V4H (r8a779g0) controller firmware
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Reorder rockchip_pci_core_rsts because
reset_control_bulk_deassert() deasserts in reverse order, to fix a
link training regression (Jensen Huang)
- Mark RK3399 as being capable of raising INTx interrupts (Niklas
Cassel)
Rockchip DesignWare PCIe controller driver:
- Check only PCIE_LINKUP, not LTSSM status, to determine whether the
link is up (Shawn Lin)
- Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s
for Root Complex and Endpoint modes (Shawn Lin)
- Hide the broken ATS Capability in rockchip_pcie_ep_init() instead
of rockchip_pcie_ep_pre_init() so it stays hidden after PERST#
resets non-sticky registers (Shawn Lin)
- Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
(Diederik de Haas)
Synopsys DesignWare PCIe controller driver:
- Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training
more robust; this will not affect the intended link width if all
lanes are functional (Wenbin Yao)
- Return bool (not int) for link-up check in dw_pcie_ops.link_up()
and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay,
keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx,
tegra194, uniphier, visconti (Hans Zhang)
- Add debugfs support for exposing DWC device-specific PTM context
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Make j721e buildable as a loadable and removable module (Siddharth
Vadapalli)
- Fix j721e host/endpoint dependencies that result in link failures
in some configs (Arnd Bergmann)
Device tree bindings:
- Add qcom DT binding for 'global' interrupt (PCIe controller and
link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p,
sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan
Sadhasivam)
- Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074,
ipq8074-gen3, ipq6018 (Manivannan Sadhasivam)
- Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang)
- Correct indentation and style of examples in brcm,stb-pcie,
cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie,
microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm
(Krzysztof Kozlowski)
- Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and
armada8k from text to schema DT bindings (Rob Herring)
- Remove obsolete .txt DT bindings for content that has been moved to
schemas (Rob Herring)
- Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074
and IPQ9574 (Varadarajan Narayanan)
- Convert v3,v360epc-pci from text to DT schema binding (Rob Herring)
- Change microchip,pcie-host DT binding to be 'dma-noncoherent' since
PolarFire may be configured that way (Conor Dooley)
Miscellaneous:
- Drop 'pci' suffix from intel_mid_pci.c filename to match similar
files (Andy Shevchenko)
- All platforms with PCI have an MMU, so add PCI Kconfig dependency
on MMU to simplify build testing and avoid inadvertent build
regressions (Arnd Bergmann)
- Update Krzysztof Wilczyński's email address in MAINTAINERS
(Krzysztof Wilczyński)
- Update Manivannan Sadhasivam's email address in MAINTAINERS
(Manivannan Sadhasivam)"
* tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits)
MAINTAINERS: Update Manivannan Sadhasivam email address
PCI: j721e: Fix host/endpoint dependencies
PCI: j721e: Add support to build as a loadable module
PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
PCI: cadence: Add support to build pcie-cadence library as a kernel module
MAINTAINERS: Update Krzysztof Wilczyński email address
PCI: Remove unnecessary linesplit in __pci_setup_bridge()
PCI: WARN (not BUG()) when we fail to assign optional resources
PCI: Remove unused pci_printk()
PCI: qcom: Replace PERST# sleep time with proper macro
PCI: dw-rockchip: Replace PERST# sleep time with proper macro
PCI: host-common: Convert to library for host controller drivers
PCI/ERR: Remove misleading TODO regarding kernel panic
PCI: cadence: Remove duplicate message code definitions
PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
PCI: cadence-ep: Correct PBA offset in .set_msix() callback
...
When CONFIG_SHMEM is not set, the following compiler error occurs:
ld: vmlinux.o: in function `ttm_backup_backup_page':
(.text+0x10363bc): undefined reference to `shmem_writeout'
make[3]: *** [/work/build/trace/nobackup/linux.git/scripts/Makefile.vmlinux:91: vmlinux.unstripped] Error 1
This is due to the replacement of writepage and calling swap_writeout()
and shmem_writeout() directly. The issue is that when CONFIG_SHMEM is
not defined, shmem_writeout() is also not defined.
The function ttm_backup_backup_page() called mapping->a_ops->writepage()
which was then changed to call shmem_writeout() directly.
Even before commit 84798514db ("mm: Remove swap_writepage() and
shmem_writepage()"), it didn't make sense to call anything other than
shmem_writeout() as the ttm_backup deals only with shmem folios.
Have DRM_TTM config option select SHMEM to guarantee that
shmem_writeout() is available.
Link: https://lore.kernel.org/all/20250602170500.48713a2b@gandalf.local.home/
Suggested-by: Hugh Dickins <hughd@google.com>
Fixes: 84798514db ("mm: Remove swap_writepage() and shmem_writepage()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When configuring the HDMI PLL, calculations use DIV_ROUND_UP_ULL and
DIV_ROUND_DOWN_ULL macros, which internally rely on do_div. However, do_div
expects a 32-bit (u32) divisor, and at higher data rates, the divisor can
exceed this limit. This leads to incorrect division results and
ultimately misconfigured PLL values.
This fix replaces do_div calls with div64_base64 calls where diviser
can exceed u32 limit.
Fixes: 5947642004 ("drm/i915/display: Add support for SNPS PHY HDMI PLL algorithm for DG2")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dibin Moolakadan Subrahmanian <dibin.moolakadan.subrahmanian@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250528064557.4172149-1-dibin.moolakadan.subrahmanian@intel.com
(cherry picked from commit ce924116e4)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
[Why]
DC and AC levels are advertised in a percentage, not a luminance.
[How]
Scale DC and AC levels to supported values.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4221
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Default BIOS brightness caps are buried in ACPI.
[How]
Add extra dynamic debug that can show default brightness caps.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
It sent an error msg when it failed to read the DP tunneling DPCD field.
This should just be a warning msg. Use a DC log instead of a DM error msg.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We've made fix for garbage in dcn31_reset_back_end_for_pipe(), adding
blank_stream() before disable_crtc(). And set_dpms_off() will call
blank_stream() again.
[How]
Add flag to avoid calling blank_stream() twice.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Only OLED panels require non-zero pre_T11_delay defaultly.
Others should be controlled by power sequence.
[How]
For non OLED, pre_T11_delay delay in code should be zero.
Also post_T7_delay.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add userq fence support to SDMAv7.0.
- GFX12's user fence irq src id differs from GFX11's,
hence we need create a new irq srcid header file for GFX12.
User fence irq src id information-
GFX11 and SDMA6.0 - 0x43
GFX12 and SDMA7.0 - 0x46
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The "num_syncobj_handles" is a u32 value that comes from the user via the
ioctl. On 32bit systems the "sizeof(uint32_t) * num_syncobj_handles"
multiplication can have an integer overflow. Use size_mul() to fix that.
Fixes: 38c67ec9aa ("drm/amdgpu: Add input fence to sync bo map/unmap")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch only affects 32bit systems. There are several integer
overflows bugs here but only the "sizeof(u32) * num_syncobj"
multiplication is a problem at runtime. (The last lines of this patch).
These variables are u32 variables that come from the user. The issue
is the multiplications can overflow leading to us allocating a smaller
buffer than intended. For the first couple integer overflows, the
syncobj_handles = memdup_user() allocation is immediately followed by
a kmalloc_array():
syncobj = kmalloc_array(num_syncobj_handles, sizeof(*syncobj), GFP_KERNEL);
In that situation the kmalloc_array() works as a bounds check and we
haven't accessed the syncobj_handlesp[] array yet so the integer overflow
is harmless.
But the "num_syncobj" multiplication doesn't have that and the integer
overflow could lead to an out of bounds access.
Fixes: a292fdecd7 ("drm/amdgpu: Implement userqueue signal/wait IOCTL")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Users have reported that they have to reduce the level of undervolting
to acheive stability when dynamic workload profiles are enabled on
GC 10.3.x. Disable dynamic workload profiles if the user has enabled
OD.
Fixes: b9467983b7 ("drm/amdgpu: add dynamic workload profile switching for gfx10")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4262
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.15.x
This patch updates the cleaner shader, which is responsible for
initializing GPU resources such as Local Data Share (LDS), Vector
General Purpose Registers (VGPRs), and Scalar General Purpose Registers
(SGPRs). Changes include adjustments to register clearing and shader
configuration.
- Updated GPU resource initialization addresses in the cleaner shader
from `be803080` to `be803000`.
- Simplified the logic in the SGPR clearing section, ensuring all SGPRs
are set to zero.
Fixes: 25961bad92 ("drm/amdgpu/gfx10: Add cleaner shader for GFX10.1.10")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Manu Rastogi <manu.rastogi@amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add more checks for valid vram size and log error, if any.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
KFD has been confirmed that can run on RISCV systems. It's necessary to
support CONFIG_HSA_AMD on RISCV.
Signed-off-by: Xuemei Liu <liu.xuemei1@zte.com.cn>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bitmap updates for 6.16-rc1 include:
- dead code cleanups for cpumasks and nodemasks (me);
- fixed-width flavors of GENMASK() and BIT() (Vincent, Lucas and me);
- FIELD_MODIFY() helper (Luo);
- for_each_node_with_cpus() optimization (me);
- bitmap-str fixes (Andy).
-----BEGIN PGP SIGNATURE-----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=vATl
-----END PGP SIGNATURE-----
Merge tag 'bitmap-for-6.16-rc1' of https://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- dead code cleanups for cpumasks and nodemasks (me)
- fixed-width flavors of GENMASK() and BIT() (Vincent, Lucas and me)
- FIELD_MODIFY() helper (Luo)
- for_each_node_with_cpus() optimization (me)
- bitmap-str fixes (Andy)
* tag 'bitmap-for-6.16-rc1' of https://github.com/norov/linux:
topology: make for_each_node_with_cpus() O(N)
bitfield: Add FIELD_MODIFY() helper
bitmap-str: Add missing header(s)
bitmap-str: Get rid of 'extern' for function prototypes
build_bug.h: more user friendly error messages in BUILD_BUG_ON_ZERO()
test_bits: add tests for BIT_U*()
test_bits: add tests for GENMASK_U*()
drm/i915: Convert REG_GENMASK*() to fixed-width GENMASK_U*()
bits: introduce fixed-type BIT_U*()
bits: introduce fixed-type GENMASK_U*()
bits: add comments and newlines to #if, #else and #endif directives
cpumask: drop cpumask_assign_cpu()
riscv: switch set_icache_stale_mask() to using non-atomic assign_cpu()
cpumask: add non-atomic __assign_cpu()
nodemask: drop nodes_shift
There is a rare race condition when preparing for a reset where
guc_lrc_desc_unpin() could be in the process of deregistering a context
while a different thread is scrubbing outstanding contexts and it alters
the context state and does a wakeref put. Then, if there is a failure
with deregister_context(), a second wakeref put could occur. As a result
the wakeref count could drop below 0 and fail an INTEL_WAKEREF_BUG_ON()
check.
Therefore if there is a failure with deregister_context(), undo the
context state changes and do a wakeref put only if the context was set
to be destroyed earlier.
v2: Expand comment to better explain change. (Daniele)
v3: Removed addition to the original comment. (Daniele)
Fixes: 2f2cc53b5f ("drm/i915/guc: Close deregister-context race against CT-loss")
Signed-off-by: Jesus Narvaez <jesus.narvaez@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Mousumi Jana <mousumi.jana@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250528230551.1855177-1-jesus.narvaez@intel.com
(cherry picked from commit f36a75aba1)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
When sending a H2G message where a reply is expected in
guc_submission_send_busy_loop(), outstanding_submission_g2h is
incremented before the send. However, if there is an error sending the
message, outstanding_submission_g2h is decremented without checking if a
reply is expected.
Therefore, check if reply is expected when there is a failure before
decrementing outstanding_submission_g2h.
Fixes: 2f2cc53b5f ("drm/i915/guc: Close deregister-context race against CT-loss")
Signed-off-by: Jesus Narvaez <jesus.narvaez@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Mousumi Jana <mousumi.jana@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250514225224.4142684-1-jesus.narvaez@intel.com
(cherry picked from commit a6a26786f2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
semaphore" from Lance Yang enhances the hung task detector. The
detector presently dumps the blocking tasks's stack when it is blocked
on a mutex. Lance's series extends this to semaphores.
- The 2 patch series "nilfs2: improve sanity checks in dirty state
propagation" from Wentao Liang addresses a couple of minor flaws in
nilfs2.
- The 2 patch series "scripts/gdb: Fixes related to lx_per_cpu()" from
Illia Ostapyshyn fixes a couple of issues in the gdb scripts.
- The 9 patch series "Support kdump with LUKS encryption by reusing LUKS
volume keys" from Coiby Xu addresses a usability problem with kdump.
When the dump device is LUKS-encrypted, the kdump kernel may not have
the keys to the encrypted filesystem. A full writeup of this is in the
series [0/N] cover letter.
- The 2 patch series "sysfs: add counters for lockups and stalls" from
Max Kellermann adds /sys/kernel/hardlockup_count and
/sys/kernel/hardlockup_count and /sys/kernel/rcu_stall_count.
- The 3 patch series "fork: Page operation cleanups in the fork code"
from Pasha Tatashin implements a number of code cleanups in fork.c.
- The 3 patch series "scripts/gdb/symbols: determine KASLR offset on
s390 during early boot" from Ilya Leoshkevich fixes some s390 issues in
the gdb scripts.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaDuCvQAKCRDdBJ7gKXxA
jrkxAQCnFAp/uK9ckkbN4nfpJ0+OMY36C+A+dawSDtuRsIkXBAEAq3e6MNAUdg5W
Ca0cXdgSIq1Op7ZKEA+66Km6Rfvfow8=
=g45L
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "hung_task: extend blocking task stacktrace dump to semaphore" from
Lance Yang enhances the hung task detector.
The detector presently dumps the blocking tasks's stack when it is
blocked on a mutex. Lance's series extends this to semaphores
- "nilfs2: improve sanity checks in dirty state propagation" from
Wentao Liang addresses a couple of minor flaws in nilfs2
- "scripts/gdb: Fixes related to lx_per_cpu()" from Illia Ostapyshyn
fixes a couple of issues in the gdb scripts
- "Support kdump with LUKS encryption by reusing LUKS volume keys" from
Coiby Xu addresses a usability problem with kdump.
When the dump device is LUKS-encrypted, the kdump kernel may not have
the keys to the encrypted filesystem. A full writeup of this is in
the series [0/N] cover letter
- "sysfs: add counters for lockups and stalls" from Max Kellermann adds
/sys/kernel/hardlockup_count and /sys/kernel/hardlockup_count and
/sys/kernel/rcu_stall_count
- "fork: Page operation cleanups in the fork code" from Pasha Tatashin
implements a number of code cleanups in fork.c
- "scripts/gdb/symbols: determine KASLR offset on s390 during early
boot" from Ilya Leoshkevich fixes some s390 issues in the gdb
scripts
* tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (67 commits)
llist: make llist_add_batch() a static inline
delayacct: remove redundant code and adjust indentation
squashfs: add optional full compressed block caching
crash_dump, nvme: select CONFIGFS_FS as built-in
scripts/gdb/symbols: determine KASLR offset on s390 during early boot
scripts/gdb/symbols: factor out pagination_off()
scripts/gdb/symbols: factor out get_vmlinux()
kernel/panic.c: format kernel-doc comments
mailmap: update and consolidate Casey Connolly's name and email
nilfs2: remove wbc->for_reclaim handling
fork: define a local GFP_VMAP_STACK
fork: check charging success before zeroing stack
fork: clean-up naming of vm_stack/vm_struct variables in vmap stacks code
fork: clean-up ifdef logic around stack allocation
kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
kernel/watchdog: add /sys/kernel/{hard,soft}lockup_count
x86/crash: make the page that stores the dm crypt keys inaccessible
x86/crash: pass dm crypt keys to kdump kernel
Revert "x86/mm: Remove unused __set_memory_prot()"
crash_dump: retrieve dm crypt keys in kdump kernel
...
simplifies the act of creating a pte which addresses the first page in a
folio and reduces the amount of plumbing which architecture must
implement to provide this.
- The 8 patch series "Misc folio patches for 6.16" from Matthew Wilcox
is a shower of largely unrelated folio infrastructure changes which
clean things up and better prepare us for future work.
- The 3 patch series "memory,x86,acpi: hotplug memory alignment
advisement" from Gregory Price adds early-init code to prevent x86 from
leaving physical memory unused when physical address regions are not
aligned to memory block size.
- The 2 patch series "mm/compaction: allow more aggressive proactive
compaction" from Michal Clapinski provides some tuning of the (sadly,
hard-coded (more sadly, not auto-tuned)) thresholds for our invokation
of proactive compaction. In a simple test case, the reduction of a guest
VM's memory consumption was dramatic.
- The 8 patch series "Minor cleanups and improvements to swap freeing
code" from Kemeng Shi provides some code cleaups and a small efficiency
improvement to this part of our swap handling code.
- The 6 patch series "ptrace: introduce PTRACE_SET_SYSCALL_INFO API"
from Dmitry Levin adds the ability for a ptracer to modify syscalls
arguments. At this time we can alter only "system call information that
are used by strace system call tampering, namely, syscall number,
syscall arguments, and syscall return value.
This series should have been incorporated into mm.git's "non-MM"
branch, but I goofed.
- The 3 patch series "fs/proc: extend the PAGEMAP_SCAN ioctl to report
guard regions" from Andrei Vagin extends the info returned by the
PAGEMAP_SCAN ioctl against /proc/pid/pagemap. This permits CRIU to more
efficiently get at the info about guard regions.
- The 2 patch series "Fix parameter passed to page_mapcount_is_type()"
from Gavin Shan implements that fix. No runtime effect is expected
because validate_page_before_insert() happens to fix up this error.
- The 3 patch series "kernel/events/uprobes: uprobe_write_opcode()
rewrite" from David Hildenbrand basically brings uprobe text poking into
the current decade. Remove a bunch of hand-rolled implementation in
favor of using more current facilities.
- The 3 patch series "mm/ptdump: Drop assumption that pxd_val() is u64"
from Anshuman Khandual provides enhancements and generalizations to the
pte dumping code. This might be needed when 128-bit Page Table
Descriptors are enabled for ARM.
- The 12 patch series "Always call constructor for kernel page tables"
from Kevin Brodsky "ensures that the ctor/dtor is always called for
kernel pgtables, as it already is for user pgtables". This permits the
addition of more functionality such as "insert hooks to protect page
tables". This change does result in various architectures performing
unnecesary work, but this is fixed up where it is anticipated to occur.
- The 9 patch series "Rust support for mm_struct, vm_area_struct, and
mmap" from Alice Ryhl adds plumbing to permit Rust access to core MM
structures.
- The 3 patch series "fix incorrectly disallowed anonymous VMA merges"
from Lorenzo Stoakes takes advantage of some VMA merging opportunities
which we've been missing for 15 years.
- The 4 patch series "mm/madvise: batch tlb flushes for MADV_DONTNEED
and MADV_FREE" from SeongJae Park optimizes process_madvise()'s TLB
flushing. Instead of flushing each address range in the provided iovec,
we batch the flushing across all the iovec entries. The syscall's cost
was approximately halved with a microbenchmark which was designed to
load this particular operation.
- The 6 patch series "Track node vacancy to reduce worst case allocation
counts" from Sidhartha Kumar makes the maple tree smarter about its node
preallocation. stress-ng mmap performance increased by single-digit
percentages and the amount of unnecessarily preallocated memory was
dramaticelly reduced.
- The 3 patch series "mm/gup: Minor fix, cleanup and improvements" from
Baoquan He removes a few unnecessary things which Baoquan noted when
reading the code.
- The 3 patch series ""Enhance sysfs handling for memory hotplug in
weighted interleave" from Rakie Kim "enhances the weighted interleave
policy in the memory management subsystem by improving sysfs handling,
fixing memory leaks, and introducing dynamic sysfs updates for memory
hotplug support". Fixes things on error paths which we are unlikely to
hit.
- The 7 patch series "mm/damon: auto-tune DAMOS for NUMA setups
including tiered memory" from SeongJae Park introduces new DAMOS quota
goal metrics which eliminate the manual tuning which is required when
utilizing DAMON for memory tiering.
- The 5 patch series "mm/vmalloc.c: code cleanup and improvements" from
Baoquan He provides cleanups and small efficiency improvements which
Baoquan found via code inspection.
- The 2 patch series "vmscan: enforce mems_effective during demotion"
from Gregory Price "changes reclaim to respect cpuset.mems_effective
during demotion when possible". because "presently, reclaim explicitly
ignores cpuset.mems_effective when demoting, which may cause the cpuset
settings to violated." "This is useful for isolating workloads on a
multi-tenant system from certain classes of memory more consistently."
- The 2 patch series ""Clean up split_huge_pmd_locked() and remove
unnecessary folio pointers" from Gavin Guo provides minor cleanups and
efficiency gains in in the huge page splitting and migrating code.
- The 3 patch series "Use kmem_cache for memcg alloc" from Huan Yang
creates a slab cache for `struct mem_cgroup', yielding improved memory
utilization.
- The 4 patch series "add max arg to swappiness in memory.reclaim and
lru_gen" from Zhongkun He adds a new "max" argument to the "swappiness="
argument for memory.reclaim MGLRU's lru_gen. This directs proactive
reclaim to reclaim from only anon folios rather than file-backed folios.
- The 17 patch series "kexec: introduce Kexec HandOver (KHO)" from Mike
Rapoport is the first step on the path to permitting the kernel to
maintain existing VMs while replacing the host kernel via file-based
kexec. At this time only memblock's reserve_mem is preserved.
- The 7 patch series "mm: Introduce for_each_valid_pfn()" from David
Woodhouse provides and uses a smarter way of looping over a pfn range.
By skipping ranges of invalid pfns.
- The 2 patch series "sched/numa: Skip VMA scanning on memory pinned to
one NUMA node via cpuset.mems" from Libo Chen removes a lot of pointless
VMA scanning when a task is pinned a single NUMA mode. Dramatic
performance benefits were seen in some real world cases.
- The 2 patch series "JFS: Implement migrate_folio for
jfs_metapage_aops" from Shivank Garg addresses a warning which occurs
during memory compaction when using JFS.
- The 4 patch series "move all VMA allocation, freeing and duplication
logic to mm" from Lorenzo Stoakes moves some VMA code from kernel/fork.c
into the more appropriate mm/vma.c.
- The 6 patch series "mm, swap: clean up swap cache mapping helper" from
Kairui Song provides code consolidation and cleanups related to the
folio_index() function.
- The 2 patch series "mm/gup: Cleanup memfd_pin_folios()" from Vishal
Moola does that.
- The 8 patch series "memcg: Fix test_memcg_min/low test failures" from
Waiman Long addresses some bogus failures which are being reported by
the test_memcontrol selftest.
- The 3 patch series "eliminate mmap() retry merge, add .mmap_prepare
hook" from Lorenzo Stoakes commences the deprecation of
file_operations.mmap() in favor of the new
file_operations.mmap_prepare(). The latter is more restrictive and
prevents drivers from messing with things in ways which, amongst other
problems, may defeat VMA merging.
- The 4 patch series "memcg: decouple memcg and objcg stocks"" from
Shakeel Butt decouples the per-cpu memcg charge cache from the objcg's
one. This is a step along the way to making memcg and objcg charging
NMI-safe, which is a BPF requirement.
- The 6 patch series "mm/damon: minor fixups and improvements for code,
tests, and documents" from SeongJae Park is "yet another batch of
miscellaneous DAMON changes. Fix and improve minor problems in code,
tests and documents."
- The 7 patch series "memcg: make memcg stats irq safe" from Shakeel
Butt converts memcg stats to be irq safe. Another step along the way to
making memcg charging and stats updates NMI-safe, a BPF requirement.
- The 4 patch series "Let unmap_hugepage_range() and several related
functions take folio instead of page" from Fan Ni provides folio
conversions in the hugetlb code.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaDt5qgAKCRDdBJ7gKXxA
ju6XAP9nTiSfRz8Cz1n5LJZpFKEGzLpSihCYyR6P3o1L9oe3mwEAlZ5+XAwk2I5x
Qqb/UGMEpilyre1PayQqOnct3aSL9Ao=
=tYYm
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "Add folio_mk_pte()" from Matthew Wilcox simplifies the act of
creating a pte which addresses the first page in a folio and reduces
the amount of plumbing which architecture must implement to provide
this.
- "Misc folio patches for 6.16" from Matthew Wilcox is a shower of
largely unrelated folio infrastructure changes which clean things up
and better prepare us for future work.
- "memory,x86,acpi: hotplug memory alignment advisement" from Gregory
Price adds early-init code to prevent x86 from leaving physical
memory unused when physical address regions are not aligned to memory
block size.
- "mm/compaction: allow more aggressive proactive compaction" from
Michal Clapinski provides some tuning of the (sadly, hard-coded (more
sadly, not auto-tuned)) thresholds for our invokation of proactive
compaction. In a simple test case, the reduction of a guest VM's
memory consumption was dramatic.
- "Minor cleanups and improvements to swap freeing code" from Kemeng
Shi provides some code cleaups and a small efficiency improvement to
this part of our swap handling code.
- "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin
adds the ability for a ptracer to modify syscalls arguments. At this
time we can alter only "system call information that are used by
strace system call tampering, namely, syscall number, syscall
arguments, and syscall return value.
This series should have been incorporated into mm.git's "non-MM"
branch, but I goofed.
- "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from
Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl
against /proc/pid/pagemap. This permits CRIU to more efficiently get
at the info about guard regions.
- "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan
implements that fix. No runtime effect is expected because
validate_page_before_insert() happens to fix up this error.
- "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David
Hildenbrand basically brings uprobe text poking into the current
decade. Remove a bunch of hand-rolled implementation in favor of
using more current facilities.
- "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman
Khandual provides enhancements and generalizations to the pte dumping
code. This might be needed when 128-bit Page Table Descriptors are
enabled for ARM.
- "Always call constructor for kernel page tables" from Kevin Brodsky
ensures that the ctor/dtor is always called for kernel pgtables, as
it already is for user pgtables.
This permits the addition of more functionality such as "insert hooks
to protect page tables". This change does result in various
architectures performing unnecesary work, but this is fixed up where
it is anticipated to occur.
- "Rust support for mm_struct, vm_area_struct, and mmap" from Alice
Ryhl adds plumbing to permit Rust access to core MM structures.
- "fix incorrectly disallowed anonymous VMA merges" from Lorenzo
Stoakes takes advantage of some VMA merging opportunities which we've
been missing for 15 years.
- "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from
SeongJae Park optimizes process_madvise()'s TLB flushing.
Instead of flushing each address range in the provided iovec, we
batch the flushing across all the iovec entries. The syscall's cost
was approximately halved with a microbenchmark which was designed to
load this particular operation.
- "Track node vacancy to reduce worst case allocation counts" from
Sidhartha Kumar makes the maple tree smarter about its node
preallocation.
stress-ng mmap performance increased by single-digit percentages and
the amount of unnecessarily preallocated memory was dramaticelly
reduced.
- "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes
a few unnecessary things which Baoquan noted when reading the code.
- ""Enhance sysfs handling for memory hotplug in weighted interleave"
from Rakie Kim "enhances the weighted interleave policy in the memory
management subsystem by improving sysfs handling, fixing memory
leaks, and introducing dynamic sysfs updates for memory hotplug
support". Fixes things on error paths which we are unlikely to hit.
- "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory"
from SeongJae Park introduces new DAMOS quota goal metrics which
eliminate the manual tuning which is required when utilizing DAMON
for memory tiering.
- "mm/vmalloc.c: code cleanup and improvements" from Baoquan He
provides cleanups and small efficiency improvements which Baoquan
found via code inspection.
- "vmscan: enforce mems_effective during demotion" from Gregory Price
changes reclaim to respect cpuset.mems_effective during demotion when
possible. because presently, reclaim explicitly ignores
cpuset.mems_effective when demoting, which may cause the cpuset
settings to violated.
This is useful for isolating workloads on a multi-tenant system from
certain classes of memory more consistently.
- "Clean up split_huge_pmd_locked() and remove unnecessary folio
pointers" from Gavin Guo provides minor cleanups and efficiency gains
in in the huge page splitting and migrating code.
- "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache
for `struct mem_cgroup', yielding improved memory utilization.
- "add max arg to swappiness in memory.reclaim and lru_gen" from
Zhongkun He adds a new "max" argument to the "swappiness=" argument
for memory.reclaim MGLRU's lru_gen.
This directs proactive reclaim to reclaim from only anon folios
rather than file-backed folios.
- "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the
first step on the path to permitting the kernel to maintain existing
VMs while replacing the host kernel via file-based kexec. At this
time only memblock's reserve_mem is preserved.
- "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides
and uses a smarter way of looping over a pfn range. By skipping
ranges of invalid pfns.
- "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via
cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning
when a task is pinned a single NUMA mode.
Dramatic performance benefits were seen in some real world cases.
- "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank
Garg addresses a warning which occurs during memory compaction when
using JFS.
- "move all VMA allocation, freeing and duplication logic to mm" from
Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more
appropriate mm/vma.c.
- "mm, swap: clean up swap cache mapping helper" from Kairui Song
provides code consolidation and cleanups related to the folio_index()
function.
- "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that.
- "memcg: Fix test_memcg_min/low test failures" from Waiman Long
addresses some bogus failures which are being reported by the
test_memcontrol selftest.
- "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo
Stoakes commences the deprecation of file_operations.mmap() in favor
of the new file_operations.mmap_prepare().
The latter is more restrictive and prevents drivers from messing with
things in ways which, amongst other problems, may defeat VMA merging.
- "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples
the per-cpu memcg charge cache from the objcg's one.
This is a step along the way to making memcg and objcg charging
NMI-safe, which is a BPF requirement.
- "mm/damon: minor fixups and improvements for code, tests, and
documents" from SeongJae Park is yet another batch of miscellaneous
DAMON changes. Fix and improve minor problems in code, tests and
documents.
- "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg
stats to be irq safe. Another step along the way to making memcg
charging and stats updates NMI-safe, a BPF requirement.
- "Let unmap_hugepage_range() and several related functions take folio
instead of page" from Fan Ni provides folio conversions in the
hugetlb code.
* tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (285 commits)
mm: pcp: increase pcp->free_count threshold to trigger free_high
mm/hugetlb: convert use of struct page to folio in __unmap_hugepage_range()
mm/hugetlb: refactor __unmap_hugepage_range() to take folio instead of page
mm/hugetlb: refactor unmap_hugepage_range() to take folio instead of page
mm/hugetlb: pass folio instead of page to unmap_ref_private()
memcg: objcg stock trylock without irq disabling
memcg: no stock lock for cpu hot-unplug
memcg: make __mod_memcg_lruvec_state re-entrant safe against irqs
memcg: make count_memcg_events re-entrant safe against irqs
memcg: make mod_memcg_state re-entrant safe against irqs
memcg: move preempt disable to callers of memcg_rstat_updated
memcg: memcg_rstat_updated re-entrant safe against irqs
mm: khugepaged: decouple SHMEM and file folios' collapse
selftests/eventfd: correct test name and improve messages
alloc_tag: check mem_profiling_support in alloc_tag_init
Docs/damon: update titles and brief introductions to explain DAMOS
selftests/damon/_damon_sysfs: read tried regions directories in order
mm/damon/tests/core-kunit: add a test for damos_set_filters_default_reject()
mm/damon/paddr: remove unused variable, folio_list, in damon_pa_stat()
mm/damon/sysfs-schemes: fix wrong comment on damons_sysfs_quota_goal_metric_strs
...
x86 already uses gcc-8 as the minimum version, this changes all other
architectures to the same version. gcc-8 is used is Debian 10 and Red
Hat Enterprise Linux 8, both of which are still supported, and binutils
2.30 is the oldest corresponding version on those. Ubuntu Pro 18.04 and
SUSE Linux Enterprise Server 15 both use gcc-7 as the system compiler
but additionally include toolchains that remain supported.
With the new minimum toolchain versions, a number of workarounds for older
versions can be dropped, in particular on x86_64 and arm64. Importantly,
the updated compiler version allows removing two of the five remaining
gcc plugins, as support for sancov and structeak features is already
included in modern compiler versions.
I tried collecting the known changes that are possible based on the
new toolchain version, but expect that more cleanups will be possible.
Since this touches multiple architectures, I merged the patches through
the asm-generic tree.
-----BEGIN PGP SIGNATURE-----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=pdDC
-----END PGP SIGNATURE-----
Merge tag 'gcc-minimum-version-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull compiler version requirement update from Arnd Bergmann:
"Require gcc-8 and binutils-2.30
x86 already uses gcc-8 as the minimum version, this changes all other
architectures to the same version. gcc-8 is used is Debian 10 and Red
Hat Enterprise Linux 8, both of which are still supported, and
binutils 2.30 is the oldest corresponding version on those.
Ubuntu Pro 18.04 and SUSE Linux Enterprise Server 15 both use gcc-7 as
the system compiler but additionally include toolchains that remain
supported.
With the new minimum toolchain versions, a number of workarounds for
older versions can be dropped, in particular on x86_64 and arm64.
Importantly, the updated compiler version allows removing two of the
five remaining gcc plugins, as support for sancov and structeak
features is already included in modern compiler versions.
I tried collecting the known changes that are possible based on the
new toolchain version, but expect that more cleanups will be possible.
Since this touches multiple architectures, I merged the patches
through the asm-generic tree."
* tag 'gcc-minimum-version-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
Makefile.kcov: apply needed compiler option unconditionally in CFLAGS_KCOV
Documentation: update binutils-2.30 version reference
gcc-plugins: remove SANCOV gcc plugin
Kbuild: remove structleak gcc plugin
arm64: drop binutils version checks
raid6: skip avx512 checks
kbuild: require gcc-8 and binutils-2.30
For simulation C models that don't run CP FW where adev->mes.sched_version
is not populated correctly. This causes NULL dereference in
amdgpu_amdkfd_free_gtt_mem(dev->adev, (void **)&pqn->q->wptr_bo_gart)
and warning on unpinned BO in amdgpu_bo_gpu_offset(q->properties.wptr_bo).
Compared with adding version check here and there,
always map wptr BO to GART simplifies things.
v2: Add NULL check in amdgpu_amdkfd_free_gtt_mem.(Philip)
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nothing uses them so remove them. Leftover from
MES bring up.
Reviewed-by: Michael Chen <michael.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to take the MES lock.
Reviewed-by: Michael Chen <michael.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
For supported ASICs DMCU version is exported, but ASICs that support
DMCUB there is no information exported to sysfs.
Add an attribute for DMCUB.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Link: https://lore.kernel.org/r/20250527155942.476354-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable static metrics support to fetch board voltage and pldm version
for smu_v13_0_14
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable static metrics support to fetch board voltage and pldm version
for other smu_v13_0_6 program
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'struct timing_generator_funcs' are not modified in these drivers.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function mod_hdcp_hdcp1_enable_encryption() calls the function
get_first_active_display(), but does not check its return value.
The return value is a null pointer if the display list is empty.
This will lead to a null pointer dereference in
mod_hdcp_hdcp2_enable_encryption().
Add a null pointer check for get_first_active_display() and return
MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null.
Fixes: 2deade5ede ("drm/amd/display: Remove hdcp display state with mst fix")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # v5.8
after getting mca address for old eeprom records with 'address==0', it can be
correctly parsed under none-nps1, or it will be dropped.
Signed-off-by: ganglxie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Get MCA address from PA in nps1, then convert MCA address to PA in specific nps
mode.
Signed-off-by: ganglxie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to fix a kfd_prcess ref leak.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add userq fence support to SDMAv6.0
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch removes the if/else statement in the
cik_event_interrupt_wq function because it is redundant
with both branches resulting in identical outcomes,
this improves code readibility.
Signed-off-by: Sunday Clement <Sunday.Clement@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Optimize get gpu metrics data function for smu_v13_0_12 to
allocate metrics structure only once
v2: Free and alloc moved to same function(Kevin)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The drm_mm allocator tolerated being passed end > mm->size, but the
drm_buddy allocator does not.
Restore the pre-buddy-allocator behavior of allowing such placements.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3448
Signed-off-by: John Olender <john.olender@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The addition of register read-back in VCN v5.0.1 is intended to prevent
potential race conditions.
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The addition of register read-back in VCN v5.0.0 is intended to prevent
potential race conditions.
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The addition of register read-back in VCN v4.0.5 is intended to prevent
potential race conditions.
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The addition of register read-back in VCN v4.0.3 is intended to prevent
potential race conditions.
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The addition of register read-back in VCN v4.0.0 is intended to prevent
potential race conditions.
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The addition of register read-back in VCN v3.0 is intended to prevent
potential race conditions.
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The addition of register read-back in VCN v2.5 is intended to prevent
potential race conditions.
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The addition of register read-back in VCN v2.0 is intended to prevent
potential race conditions.
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 50f29ead1f.
Reason for revert: cause corruption on Dell U3224KB DP2 display.
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V3: drop changes where readbacks have implemented. This patch set
is to add readbacks only.
V2: use common register UVD_STATUS for readback (standard PCI MMIO
behavior, i.e. readback post all writes to let the writes hit
the hardware)
add readback in ..._stop() for more coverage.
Similar to the changes made for VCN v4.0.5 where readback to post the
writes to avoid race with the doorbell, the addition of register
readback support in other VCN versions is intended to prevent potential
race conditions, even though such issues have not been observed yet.
This change ensures consistency across different VCN variants and helps
avoid similar issues. The overhead introduced is negligible.
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
FAMS is the successor to SubVP starting with DCN4x. Reuse the same
debug option to disable FAMS for debugging purposes.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit cfb2d41831 since it
causes regressions on certain configs. Revert until the issue can be
isolated and debugged.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4238
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Add some HDCP related register headers for future use.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ISP is a child device to GFX, and its device specific information
is not available in ACPI. Adding the 2 GPIO resources required for
ISP_v4_1_1 in amdgpu_isp driver.
- GPIO 0 to allow sensor driver to enable and disable sensor module.
- GPIO 85 to allow ISP driver to enable and disable ISP RGB streaming mode.
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- remove disgusting turds
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
-----BEGIN PGP SIGNATURE-----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=jpVr
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"As part of building up nova-core/nova-drm pieces we've brought in some
rust abstractions through this tree, aux bus being the main one, with
devres changes also in the driver-core tree. Along with the drm core
abstractions and enough nova-core/nova-drm to use them. This is still
all stub work under construction, to build the nova driver upstream.
The other big NVIDIA related one is nouveau adds support for
Hopper/Blackwell GPUs, this required a new GSP firmware update to
570.144, and a bunch of rework in order to support multiple fw
interfaces.
There is also the introduction of an asahi uapi header file as a
precursor to getting the real driver in later, but to unblock
userspace mesa packages while the driver is trapped behind rust
enablement.
Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe,
and msm being the main ones, and some changes to vsprintf.
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
* tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits)
drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr()
drm/xe: Default auto_link_downgrade status to false
drm/xe/guc: Make creation of SLPC debugfs files conditional
drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue()
drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read
drm/i915/ptl: Use everywhere the correct DDI port clock select mask
drm/nouveau/kms: add support for GB20x
drm/dp: add option to disable zero sized address only transactions.
drm/nouveau: add support for GB20x
drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle
drm/nouveau: add support for GB10x
drm/nouveau/gf100-: track chan progress with non-WFI semaphore release
drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA
drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos
drm/nouveau: add support for GH100
drm/nouveau: improve handling of 64-bit BARs
drm/nouveau/gv100-: switch to volta semaphore methods
drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES
drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY
drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM
...
While at it, already adjust the rpe_freq frequency, to highlight
that both are calculated by PCODE at runtime.
Fixes: c6aac2fa77 ("drm/xe: Introduce the RPa information")
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://lore.kernel.org/r/20250521165146.39616-4-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 39578fa404)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The documentation was created with the creation of the component,
however it has never been actually shown in the actual Documentation.
While doing this, fixes the identation style, to avoid new warnings
while building htmldocs.
Fixes: bef52b5c7a ("drm/xe: Create a xe_gt_freq component for raw management and sysfs")
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250521165146.39616-3-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit af53f0fd99)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Commit 6579a03e68 ("drm/bridge: analogix_dp: Remove the unnecessary
calls to clk_disable_unprepare() during probing") removed the mismatched
clock_disable calls from analogix_dp_probe.
But that patch was created and sent before
commit e5e9fa9f7a ("drm/bridge: analogix_dp: Add support to get panel
from the DP AUX bus") was merged, so couldn't know about this change.
So in the original patch the last change is
if (ret) {
dev_err(&pdev->dev, "failed to request irq\n");
- goto err_disable_clk;
+ return ERR_PTR(ret);
}
disable_irq(dp->irq);
return dp;
-
-err_disable_clk:
- clk_disable_unprepare(dp->clock);
- return ERR_PTR(ret);
}
EXPORT_SYMBOL_GPL(analogix_dp_probe);
the analogix_dp_core.c actually now has the runtime-pm handling between
disable_irq() and return do introducing another goto err_clk_disable there.
So remove that one too and return an error pointer, to not create build
breakage.
Fixes: 6579a03e68 ("drm/bridge: analogix_dp: Remove the unnecessary calls to clk_disable_unprepare() during probing")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250527225120.3361663-1-heiko@sntech.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
- Fix potential division-by-zero error in em_compute_costs() (Yaxiong
Tian).
- Fix typos in energy model documentation and example driver code (Moon
Hee Lee, Atul Kumar Pant).
- Rearrange the energy model management code and add a new function for
adjusting a CPU energy model after adjusting the capacity of the
given CPU to it (Rafael Wysocki).
- Refactor cpufreq_online(), add and use cpufreq policy locking guards,
use __free() in policy reference counting, and clean up core cpufreq
code on top of that (Rafael Wysocki).
- Fix boost handling on CPU suspend/resume and sysfs updates (Viresh
Kumar).
- Fix des_perf clamping with max_perf in amd_pstate_update() (Dhananjay
Ugwekar).
- Add offline, online and suspend callbacks to the amd-pstate driver,
rename and use the existing amd_pstate_epp callbacks in it (Dhananjay
Ugwekar).
- Add support for the "Requested CPU Min frequency" BIOS option to the
amd-pstate driver (Dhananjay Ugwekar).
- Reset amd-pstate driver mode after running selftests (Swapnil
Sapkal).
- Avoid shadowing ret in amd_pstate_ut_check_driver() (Nathan
Chancellor).
- Add helper for governor checks to the schedutil cpufreq governor and
move cpufreq-specific EAS checks to cpufreq (Rafael Wysocki).
- Populate the cpu_capacity sysfs entries from the intel_pstate driver
after registering asym capacity support (Ricardo Neri).
- Add support for enabling Energy-aware scheduling (EAS) to the
intel_pstate driver when operating in the passive mode on a hybrid
platform (Rafael Wysocki).
- Drop redundant cpus_read_lock() from store_local_boost() in the
cpufreq core (Seyediman Seyedarab).
- Replace sscanf() with kstrtouint() in the cpufreq code and use a
symbol instead of a raw number in it (Bowen Yu).
- Add support for autonomous CPU performance state selection to the
CPPC cpufreq driver (Lifeng Zheng).
- OPP: Add dev_pm_opp_set_level() (Praveen Talari).
- Introduce scope-based cleanup headers and mutex locking guards in OPP
core (Viresh Kumar).
- Switch OPP to use kmemdup_array() (Zhang Enpei).
- Optimize bucket assignment when next_timer_ns equals KTIME_MAX in the
menu cpuidle governor (Zhongqiu Han).
- Convert the cpuidle PSCI driver to a faux device one (Sudeep Holla).
- Add C1 demotion on/off sysfs knob to the intel_idle driver (Artem
Bityutskiy).
- Fix typos in two comments in the teo cpuidle governor (Atul Kumar
Pant).
- Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja
Kalla).
- Move debug runtime PM attributes to runtime_attrs[] (Rafael Wysocki).
- Add new devm_ functions for enabling runtime PM and runtime PM
reference counting (Bence Csókás).
- Remove size arguments from strscpy() calls in the hibernation core
code (Thorsten Blum).
- Adjust the handling of devices with asynchronous suspend enabled
during system suspend and resume to start resuming them immediately
after resuming their parents and to start suspending such a device
immediately after suspending its first child (Rafael Wysocki).
- Adjust messages printed during tasks freezing to avoid using
pr_cont() (Andrew Sayers, Paul Menzel).
- Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan
Zhang).
- Add missing wakeup source attribute relax_count to sysfs and
remove the space character at the end ofi the string produced by
pm_show_wakelocks() (Zijun Hu).
- Add configurable pm_test delay for hibernation (Zihuan Zhang).
- Disable asynchronous suspend in ucsi_ccg_probe() to prevent the
cypd4226 device on Tegra boards from suspending prematurely (Jon
Hunter).
- Unbreak printing PM debug messages during hibernation and clean up
some related code (Rafael Wysocki).
- Add a systemd service to run cpupower and change cpupower binding's
Makefile to use -lcpupower (John B. Wyatt IV, Francesco Poli).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmg0xS0SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1AwwH/Rvgza5YBPb9JZqWJT/ZiBw7HcEWHhP1
fNfcVU1gXPZiF0yoPfjfJua6BcLj6lyQ3d/+zWqqAcWfmRSD6HPe8yYz8qALUAqj
RWhDa04aGj6B9bQuOjejatznYlQlkwCRT7zec+75D+dAHVMqR/Vt2LFAetCadgHe
MQibAQmVFXu3RFkBjReTAdGzVoTXkwoZDrzdfA2aFAfMJNtJpOW4atUZvnucuctv
VK3ZratrctCIw7yXEoB1nWSmlY7R5JlslplBfndjmmOnky3YxNr7C6paqwtbTWoF
MiX48qkmLOGeO6gS8s/lVCDQ4oZ+UNFQvXRsM5NGjycBikhHX/dp/w4=
=dIqJ
-----END PGP SIGNATURE-----
Merge tag 'pm-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"Once again, the changes are dominated by cpufreq updates, but this
time the majority of them are cpufreq core changes, mostly related to
the introduction of policy locking guards and __free() usage, and
fixes related to boost handling.
Still, there is also a significant update of the intel_pstate driver
making it register an energy model when running on a hybrid platform
which is used for enabling energy-aware scheduling (EAS) if the driver
operates in the passive mode (and schedutil is used as the cpufreq
governor for all CPUs which is the passive mode default).
There are some amd-pstate driver updates too, for a good measure,
including the "Requested CPU Min frequency" BIOS option support and
new online/offline callbacks.
In the cpuidle space, the most significant change is the addition of a
C1 demotion on/off sysfs knob to intel_idle which should help some
users to configure their systems more precisely. There is also the
conversion of the PSCI cpuidle driver to a faux device one and there
are two small updates of cpuidle governors.
Device power management is also modified quite a bit, especially the
handling of devices with asynchronous suspend and resume enabled
during system transitions. They are now going to be handled more
asynchronously during suspend transitions and somewhat less
aggressively during resume transitions.
Apart from the above, the operating performance points (OPP) library
is now going to use mutex locking guards and scope-based cleanup
helpers and there is the usual bunch of assorted fixes and code
cleanups.
Specifics:
- Fix potential division-by-zero error in em_compute_costs() (Yaxiong
Tian)
- Fix typos in energy model documentation and example driver code
(Moon Hee Lee, Atul Kumar Pant)
- Rearrange the energy model management code and add a new function
for adjusting a CPU energy model after adjusting the capacity of
the given CPU to it (Rafael Wysocki)
- Refactor cpufreq_online(), add and use cpufreq policy locking
guards, use __free() in policy reference counting, and clean up
core cpufreq code on top of that (Rafael Wysocki)
- Fix boost handling on CPU suspend/resume and sysfs updates (Viresh
Kumar)
- Fix des_perf clamping with max_perf in amd_pstate_update()
(Dhananjay Ugwekar)
- Add offline, online and suspend callbacks to the amd-pstate driver,
rename and use the existing amd_pstate_epp callbacks in it
(Dhananjay Ugwekar)
- Add support for the "Requested CPU Min frequency" BIOS option to
the amd-pstate driver (Dhananjay Ugwekar)
- Reset amd-pstate driver mode after running selftests (Swapnil
Sapkal)
- Avoid shadowing ret in amd_pstate_ut_check_driver() (Nathan
Chancellor)
- Add helper for governor checks to the schedutil cpufreq governor
and move cpufreq-specific EAS checks to cpufreq (Rafael Wysocki)
- Populate the cpu_capacity sysfs entries from the intel_pstate
driver after registering asym capacity support (Ricardo Neri)
- Add support for enabling Energy-aware scheduling (EAS) to the
intel_pstate driver when operating in the passive mode on a hybrid
platform (Rafael Wysocki)
- Drop redundant cpus_read_lock() from store_local_boost() in the
cpufreq core (Seyediman Seyedarab)
- Replace sscanf() with kstrtouint() in the cpufreq code and use a
symbol instead of a raw number in it (Bowen Yu)
- Add support for autonomous CPU performance state selection to the
CPPC cpufreq driver (Lifeng Zheng)
- OPP: Add dev_pm_opp_set_level() (Praveen Talari)
- Introduce scope-based cleanup headers and mutex locking guards in
OPP core (Viresh Kumar)
- Switch OPP to use kmemdup_array() (Zhang Enpei)
- Optimize bucket assignment when next_timer_ns equals KTIME_MAX in
the menu cpuidle governor (Zhongqiu Han)
- Convert the cpuidle PSCI driver to a faux device one (Sudeep Holla)
- Add C1 demotion on/off sysfs knob to the intel_idle driver (Artem
Bityutskiy)
- Fix typos in two comments in the teo cpuidle governor (Atul Kumar
Pant)
- Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja
Kalla)
- Move debug runtime PM attributes to runtime_attrs[] (Rafael
Wysocki)
- Add new devm_ functions for enabling runtime PM and runtime PM
reference counting (Bence Csókás)
- Remove size arguments from strscpy() calls in the hibernation core
code (Thorsten Blum)
- Adjust the handling of devices with asynchronous suspend enabled
during system suspend and resume to start resuming them immediately
after resuming their parents and to start suspending such a device
immediately after suspending its first child (Rafael Wysocki)
- Adjust messages printed during tasks freezing to avoid using
pr_cont() (Andrew Sayers, Paul Menzel)
- Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan
Zhang)
- Add missing wakeup source attribute relax_count to sysfs and remove
the space character at the end ofi the string produced by
pm_show_wakelocks() (Zijun Hu)
- Add configurable pm_test delay for hibernation (Zihuan Zhang)
- Disable asynchronous suspend in ucsi_ccg_probe() to prevent the
cypd4226 device on Tegra boards from suspending prematurely (Jon
Hunter)
- Unbreak printing PM debug messages during hibernation and clean up
some related code (Rafael Wysocki)
- Add a systemd service to run cpupower and change cpupower binding's
Makefile to use -lcpupower (John B. Wyatt IV, Francesco Poli)"
* tag 'pm-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
cpufreq: CPPC: Add support for autonomous selection
cpufreq: Update sscanf() to kstrtouint()
cpufreq: Replace magic number
OPP: switch to use kmemdup_array()
PM: freezer: Rewrite restarting tasks log to remove stray *done.*
PM: runtime: fix denying of auto suspend in pm_suspend_timer_fn()
cpufreq: drop redundant cpus_read_lock() from store_local_boost()
cpupower: do not install files to /etc/default/
cpupower: do not call systemctl at install time
cpupower: do not write DESTDIR to cpupower.service
PM: sleep: Introduce pm_sleep_transition_in_progress()
cpufreq/amd-pstate: Avoid shadowing ret in amd_pstate_ut_check_driver()
cpufreq: intel_pstate: Document hybrid processor support
cpufreq: intel_pstate: EAS: Increase cost for CPUs using L3 cache
cpufreq: intel_pstate: EAS support for hybrid platforms
PM: EM: Introduce em_adjust_cpu_capacity()
PM: EM: Move CPU capacity check to em_adjust_new_capacity()
PM: EM: Documentation: Fix typos in example driver code
cpufreq: Drop policy locking from cpufreq_policy_is_good_for_eas()
PM: sleep: Introduce pm_suspend_in_progress()
...
With the commit f37952339c ("drm/bridge: analogix_dp: handle clock via
runtime PM"), the PM operations can help enable/disable the clock. The
err_disable_clk label and clk_disable_unprepare() operations are no
longer necessary because the analogix_dp_resume() will not be called
during probing.
Fixes: f37952339c ("drm/bridge: analogix_dp: handle clock via runtime PM")
Suggested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250302083043.3197235-1-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
On driver remove, sound/soc/codecs/hdmi-codec.c calls the plugged_cb
with NULL as the callback function and codec_dev, as seen in its
hdmi_remove function.
The HDMI audio helper then happily tries calling said null function
pointer, and produces an Oops as a result.
Fix this by only executing the callback if fn is non-null. This means
the .plugged_cb and .plugged_cb_dev members still get appropriately
cleared.
Fixes: baf616647f ("drm/connector: implement generic HDMI audio helpers")
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250527-hdmi-audio-helper-remove-fix-v1-1-6cf77de364d8@collabora.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
- The most significant change is the replacement of the old kernel-doc
script (a monstrous collection of Perl regexes that predates the Git era)
with a Python reimplementation. That, too, is a horrifying collection of
regexes, but in a much cleaner and more maintainable structure that
integrates far better with the Sphinx build system.
This change has been in linux-next for the full 6.15 cycle; the small
number of problems that turned up have been addressed, seemingly to
everybody's satisfaction. The Perl kernel-doc script remains in tree (as
scripts/kernel-doc.pl) and can be used with a command-line option if need
be. Unless some reason to keep it around materializes, it will probably
go away in 6.17.
Credit goes to Mauro Carvalho Chehab for doing all this work.
- Some RTLA documentation updates
- A handful of Chinese translations
- The usual collection of typo fixes, general updates, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmg0j/IPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Yu7sH/1w2LtO8XB/KTRNmuz3tV6KzGtDvQVwqgxB2
X8bbeJlBtYenvuak66RjCfucOh7Y8Ni3UN0G2BGa67KBAxmZEYc6u+IF4SrJUg5g
DuS6+ZXgqV4TrjWMRof5LtPS8KbNJLGnqgxSVdEPSBV0jJ13r3gb3/e7X06iNAKR
X4Nq+h5aa1tCwZTkPOSHHQn4qm3Tb1LQreDSn8gnBn6e8nVJIakNlwaVYkClhI9B
byvItInv32LPAXPDkcEWITvLNUTiMobTyfBYHOD6i3nImQ+j4ZiMMmOUjiB+0jDO
UQDvoUa46ipXkLBsBOrYEkM/iKXBawMwTa3CcudxR4scvVgATJs=
=BQ9X
-----END PGP SIGNATURE-----
Merge tag 'docs-6.16' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A moderately busy cycle for documentation this time around:
- The most significant change is the replacement of the old
kernel-doc script (a monstrous collection of Perl regexes that
predates the Git era) with a Python reimplementation. That, too, is
a horrifying collection of regexes, but in a much cleaner and more
maintainable structure that integrates far better with the Sphinx
build system.
This change has been in linux-next for the full 6.15 cycle; the
small number of problems that turned up have been addressed,
seemingly to everybody's satisfaction. The Perl kernel-doc script
remains in tree (as scripts/kernel-doc.pl) and can be used with a
command-line option if need be. Unless some reason to keep it
around materializes, it will probably go away in 6.17.
Credit goes to Mauro Carvalho Chehab for doing all this work.
- Some RTLA documentation updates
- A handful of Chinese translations
- The usual collection of typo fixes, general updates, etc"
* tag 'docs-6.16' of git://git.lwn.net/linux: (85 commits)
Docs: doc-guide: update sphinx.rst Sphinx version number
docs: doc-guide: clarify latest theme usage
Documentation/scheduler: Fix typo in sched-stats domain field description
scripts: kernel-doc: prevent a KeyError when checking output
docs: kerneldoc.py: simplify exception handling logic
MAINTAINERS: update linux-doc entry to cover new Python scripts
docs: align with scripts/syscall.tbl migration
Documentation: NTB: Fix typo
Documentation: ioctl-number: Update table intro
docs: conf.py: drop backward support for old Sphinx versions
Docs: driver-api/basics: add kobject_event interfaces
Docs: relay: editing cleanups
docs: fix "incase" typo in coresight/panic.rst
Fix spelling error for 'parallel'
docs: admin-guide: fix typos in reporting-issues.rst
docs: dmaengine: add explanation for DMA_ASYNC_TX capability
Documentation: leds: improve readibility of multicolor doc
docs: fix typo in firmware-related section
docs: Makefile: Inherit PYTHONPYCACHEPREFIX setting as env variable
Documentation: ioctl-number: Update outdated submission info
...
Changes
-------
* Reduce open-coded use of ratelimit_state structure fields.
* Convert the ->missed field to atomic_t.
* Count misses that are due to lock contention.
* Eliminate jiffies=0 special case.
* Reduce ___ratelimit() false-positive rate limiting (Petr Mladek).
* Allow zero ->burst to hard-disable rate limiting.
* Optimize away atomic operations when a miss is guaranteed.
* Warn if ->interval or ->burst are negative (Petr Mladek).
* Simplify the resulting code.
A smoke test and stress test have been created, but they are not yet ready
for mainline. With luck, we will offer them for the v6.17 merge window.
-----BEGIN PGP SIGNATURE-----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=ivk+
-----END PGP SIGNATURE-----
Merge tag 'ratelimit.2025.05.25a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull rate-limit updates from Paul McKenney:
"lib/ratelimit: Reduce false-positive and silent misses:
- Reduce open-coded use of ratelimit_state structure fields.
- Convert the ->missed field to atomic_t.
- Count misses that are due to lock contention.
- Eliminate jiffies=0 special case.
- Reduce ___ratelimit() false-positive rate limiting (Petr Mladek).
- Allow zero ->burst to hard-disable rate limiting.
- Optimize away atomic operations when a miss is guaranteed.
- Warn if ->interval or ->burst are negative (Petr Mladek).
- Simplify the resulting code.
A smoke test and stress test have been created, but they are not yet
ready for mainline. With luck, we will offer them for the v6.17 merge
window"
* tag 'ratelimit.2025.05.25a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
ratelimit: Drop redundant accesses to burst
ratelimit: Use nolock_ret restructuring to collapse common case code
ratelimit: Use nolock_ret label to collapse lock-failure code
ratelimit: Use nolock_ret label to save a couple of lines of code
ratelimit: Simplify common-case exit path
ratelimit: Warn if ->interval or ->burst are negative
ratelimit: Avoid atomic decrement under lock if already rate-limited
ratelimit: Avoid atomic decrement if already rate-limited
ratelimit: Don't flush misses counter if RATELIMIT_MSG_ON_RELEASE
ratelimit: Force re-initialization when rate-limiting re-enabled
ratelimit: Allow zero ->burst to disable ratelimiting
ratelimit: Reduce ___ratelimit() false-positive rate limiting
ratelimit: Avoid jiffies=0 special case
ratelimit: Count misses due to lock contention
ratelimit: Convert the ->missed field to atomic_t
drm/amd/pm: Avoid open-coded use of ratelimit_state structure's internals
drm/i915: Avoid open-coded use of ratelimit_state structure's ->missed field
random: Avoid open-coded use of ratelimit_state structure's ->missed field
ratelimit: Create functions to handle ratelimit_state internals
- Convert init_timer*(), try_to_del_timer_sync() and
destroy_timer_on_stack() over to the canonical timer_*() namespace
convention.
There are is another large converstion pending, which has not been included
because it would have caused a gazillion of merge conflicts in next. The
conversion scripts will be run towards the end of the merge window and a
pull request sent once all conflict dependencies have been merged.
-----BEGIN PGP SIGNATURE-----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=FHGU
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"Another set of timer API cleanups:
- Convert init_timer*(), try_to_del_timer_sync() and
destroy_timer_on_stack() over to the canonical timer_*()
namespace convention.
There is another large conversion pending, which has not been included
because it would have caused a gazillion of merge conflicts in next.
The conversion scripts will be run towards the end of the merge window
and a pull request sent once all conflict dependencies have been
merged"
* tag 'timers-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename destroy_timer_on_stack() as timer_destroy_on_stack()
treewide, timers: Rename try_to_del_timer_sync() as timer_delete_sync_try()
timers: Rename init_timers() as timers_init()
timers: Rename NEXT_TIMER_MAX_DELTA as TIMER_NEXT_MAX_DELTA
timers: Rename __init_timer_on_stack() as __timer_init_on_stack()
timers: Rename __init_timer() as __timer_init()
timers: Rename init_timer_on_stack_key() as timer_init_key_on_stack()
timers: Rename init_timer_key() as timer_init_key()
- Consolidate on one set of functions for the interrupt domain code to
get rid of pointlessly duplicated code with only marginal different
semantics.
- Update the documentation accordingly and consolidate the coding style
of the irqdomain header.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmgzd+MTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYodTRD/0RmG5tngCbEJmTw6lPDQzRZH4OO3ja
yRYlyBipemoRmvJRGjV4uHqN2QPrdOuoqMuyBO1aWcMdkpww5bAHcbgSFrlGM1lW
kqtaxVMbufPiLQSGYe7OQf478CE1ykoBd5Va8whFKrtA73qEUdEMfWT0stspg780
7BlmQOemL91p7Ytf03FbDdo8tZ5Xu9uXGAulwY9FZsFtsCNyvhl7nOv5Sk8ZQtGO
xHRCeunjZLWR+IaK59hdakvQybXwSnjT6jODp96nlyKABEKSPShGSPFDWd3g9px7
4911QwgnvTbcrsk6YmQEmPIOgXZzypjbnjpJr8tFpTbkVIy+6chi5cBJzXoqsUaM
ylTwFcUQNvcP8yF447qb+nyPFKM5xsC07W0UpZMuJUDmhhPRtDm5pK0jpsif96GP
l4aMsWe65PUmXHQqLdE89RJXAa8XQ2qspKVtNKq9DmEVgTviQ09Z9SSQIx4U0yIx
w+YPde8kH2+O+YtMUn/MmfHhUP4MKya7j5zd8Bnv8wLBi7XGPPA5EKKh9I0dz9m+
X94lweNXyH+Q8U9mt2cQf8VG8Yzgk0eeC0sliJIlybwRgEgRcQbVWw0VvZUA1ySa
VBlaj3SinO90FEQ0CctT51ss2mUJ/XsGCnxpiGZXfqIZzFbyD1YfZQnXJH0H67DI
CqdHw22I27Mu/A==
=9nLp
-----END PGP SIGNATURE-----
Merge tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq cleanups from Thomas Gleixner:
"A set of cleanups for the generic interrupt subsystem:
- Consolidate on one set of functions for the interrupt domain code
to get rid of pointlessly duplicated code with only marginal
different semantics.
- Update the documentation accordingly and consolidate the coding
style of the irqdomain header"
* tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
irqdomain: Consolidate coding style
irqdomain: Fix kernel-doc and add it to Documentation
Documentation: irqdomain: Update it
Documentation: irq-domain.rst: Simple improvements
Documentation: irq/concepts: Minor improvements
Documentation: irq/concepts: Add commas and reflow
irqdomain: Improve kernel-docs of functions
irqdomain: Make struct irq_domain_info variables const
irqdomain: Use irq_domain_instantiate()'s return value as initializers
irqdomain: Drop irq_linear_revmap()
pinctrl: keembay: Switch to irq_find_mapping()
irqchip/armada-370-xp: Switch to irq_find_mapping()
gpu: ipu-v3: Switch to irq_find_mapping()
gpio: idt3243x: Switch to irq_find_mapping()
sh: Switch to irq_find_mapping()
powerpc: Switch to irq_find_mapping()
irqdomain: Drop irq_domain_add_*() functions
powerpc: Switch irq_domain_add_nomap() to use fwnode
thermal: Switch to irq_domain_create_linear()
soc: Switch to irq_domain_create_*()
...
This reverts commit d6e0208196.
The IS_DGFX check was put in place because error capture of buffer
objects is expected to be broken on devices with VRAM.
Userspace fix[1] to the impacted media driver has been submitted, merged
and a new driver release is out as 25.2.3 where the capture flag is
dropped on DG1 thus unblocking the usage of media driver on DG1.
[1] 93c07d9b4b
Cc: stable@vger.kernel.org # v6.0+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20250522064127.24293-1-joonas.lahtinen@linux.intel.com
[Joonas: Update message to point out the merged userspace fix]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit d2dc30e0aa)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The intel-media-driver is currently broken on DG1 because
it uses EXEC_CAPTURE with recovarable contexts. Relax the
check to allow that.
I've also submitted a fix for the intel-media-driver:
https://github.com/intel/media-driver/pull/1920
Cc: stable@vger.kernel.org # v6.0+
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Testcase: igt/gem_exec_capture/capture-invisible
Fixes: 71b1669ea9 ("drm/i915/uapi: tweak error capture on recoverable contexts")
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250411144313.11660-2-ville.syrjala@linux.intel.com
(cherry picked from commit d6e0208196)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Boot code changes:
- A large series of changes to reorganize the x86 boot code into a better isolated
and easier to maintain base of PIC early startup code in arch/x86/boot/startup/,
by Ard Biesheuvel.
Motivation & background:
| Since commit
|
| c88d71508e ("x86/boot/64: Rewrite startup_64() in C")
|
| dated Jun 6 2017, we have been using C code on the boot path in a way
| that is not supported by the toolchain, i.e., to execute non-PIC C
| code from a mapping of memory that is different from the one provided
| to the linker. It should have been obvious at the time that this was a
| bad idea, given the need to sprinkle fixup_pointer() calls left and
| right to manipulate global variables (including non-pointer variables)
| without crashing.
|
| This C startup code has been expanding, and in particular, the SEV-SNP
| startup code has been expanding over the past couple of years, and
| grown many of these warts, where the C code needs to use special
| annotations or helpers to access global objects.
This tree includes the first phase of this work-in-progress x86 boot code
reorganization.
Scalability enhancements and micro-optimizations:
- Improve code-patching scalability (Eric Dumazet)
- Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR (Andrew Cooper)
CPU features enumeration updates:
- Thorough reorganization and cleanup of CPUID parsing APIs (Ahmed S. Darwish)
- Fix, refactor and clean up the cacheinfo code (Ahmed S. Darwish, Thomas Gleixner)
- Update CPUID bitfields to x86-cpuid-db v2.3 (Ahmed S. Darwish)
Memory management changes:
- Allow temporary MMs when IRQs are on (Andy Lutomirski)
- Opt-in to IRQs-off activate_mm() (Andy Lutomirski)
- Simplify choose_new_asid() and generate better code (Borislav Petkov)
- Simplify 32-bit PAE page table handling (Dave Hansen)
- Always use dynamic memory layout (Kirill A. Shutemov)
- Make SPARSEMEM_VMEMMAP the only memory model (Kirill A. Shutemov)
- Make 5-level paging support unconditional (Kirill A. Shutemov)
- Stop prefetching current->mm->mmap_lock on page faults (Mateusz Guzik)
- Predict valid_user_address() returning true (Mateusz Guzik)
- Consolidate initmem_init() (Mike Rapoport)
FPU support and vector computing:
- Enable Intel APX support (Chang S. Bae)
- Reorgnize and clean up the xstate code (Chang S. Bae)
- Make task_struct::thread constant size (Ingo Molnar)
- Restore fpu_thread_struct_whitelist() to fix CONFIG_HARDENED_USERCOPY=y
(Kees Cook)
- Simplify the switch_fpu_prepare() + switch_fpu_finish() logic (Oleg Nesterov)
- Always preserve non-user xfeatures/flags in __state_perm (Sean Christopherson)
Microcode loader changes:
- Help users notice when running old Intel microcode (Dave Hansen)
- AMD: Do not return error when microcode update is not necessary (Annie Li)
- AMD: Clean the cache if update did not load microcode (Boris Ostrovsky)
Code patching (alternatives) changes:
- Simplify, reorganize and clean up the x86 text-patching code (Ingo Molnar)
- Make smp_text_poke_batch_process() subsume smp_text_poke_batch_finish()
(Nikolay Borisov)
- Refactor the {,un}use_temporary_mm() code (Peter Zijlstra)
Debugging support:
- Add early IDT and GDT loading to debug relocate_kernel() bugs (David Woodhouse)
- Print the reason for the last reset on modern AMD CPUs (Yazen Ghannam)
- Add AMD Zen debugging document (Mario Limonciello)
- Fix opcode map (!REX2) superscript tags (Masami Hiramatsu)
- Stop decoding i64 instructions in x86-64 mode at opcode (Masami Hiramatsu)
CPU bugs and bug mitigations:
- Remove X86_BUG_MMIO_UNKNOWN (Borislav Petkov)
- Fix SRSO reporting on Zen1/2 with SMT disabled (Borislav Petkov)
- Restructure and harmonize the various CPU bug mitigation methods
(David Kaplan)
- Fix spectre_v2 mitigation default on Intel (Pawan Gupta)
MSR API:
- Large MSR code and API cleanup (Xin Li)
- In-kernel MSR API type cleanups and renames (Ingo Molnar)
PKEYS:
- Simplify PKRU update in signal frame (Chang S. Bae)
NMI handling code:
- Clean up, refactor and simplify the NMI handling code (Sohil Mehta)
- Improve NMI duration console printouts (Sohil Mehta)
Paravirt guests interface:
- Restrict PARAVIRT_XXL to 64-bit only (Kirill A. Shutemov)
SEV support:
- Share the sev_secrets_pa value again (Tom Lendacky)
x86 platform changes:
- Introduce the <asm/amd/> header namespace (Ingo Molnar)
- i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to <asm/amd/fch.h>
(Mario Limonciello)
Fixes and cleanups:
- x86 assembly code cleanups and fixes (Uros Bizjak)
- Misc fixes and cleanups (Andi Kleen, Andy Lutomirski, Andy Shevchenko,
Ard Biesheuvel, Bagas Sanjaya, Baoquan He, Borislav Petkov, Chang S. Bae,
Chao Gao, Dan Williams, Dave Hansen, David Kaplan, David Woodhouse,
Eric Biggers, Ingo Molnar, Josh Poimboeuf, Juergen Gross, Malaya Kumar Rout,
Mario Limonciello, Nathan Chancellor, Oleg Nesterov, Pawan Gupta,
Peter Zijlstra, Shivank Garg, Sohil Mehta, Thomas Gleixner, Uros Bizjak,
Xin Li)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmgy9WARHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1jJSw/+OW2zvAx602doujBIE17vFLU7R10Xwj5H
lVgomkWCoTNscUZPhdT/iI+/kQF1fG8PtN9oZKUsTAUswldKJsqu7KevobviesiW
qI+FqH/fhHaIk7GVh9VP65Dgrdki8zsgd7BFxD8pLRBlbZTxTxXNNkuNJrs6LxJh
SxWp/FVtKo6Wd57qlUcsdo0tilAfcuhlEweFUarX55X2ouhdeHjcGNpxj9dHKOh8
M7R5yMYFrpfdpSms+WaCnKKahWHaIQtQTsPAyKwoVdtfl1kK+7NgaCF55Gbo3ogp
r59JwC/CGruDa5QnnDizCwFIwpZw9M52Q1NhP/eLEZbDGB4Yya3b5NW+Ya+6rPvO
ZZC3e1uUmlxW3lrYflUHurnwrVb2GjkQZOdf0gfnly/7LljIicIS2dk4qIQF9NBd
sQPpW5hjmIz9CsfeL8QaJW38pQyMsQWznFuz4YVuHcLHvleb3hR+n4fNfV5Lx9bw
oirVETSIT5hy/msAgShPqTqFUEiVCgp16ow20YstxxzFu/FQ+VG987tkeUyFkPMe
q1v5yF1hty+TkM4naKendIZ/MJnsrv0AxaegFz9YQrKGL1UPiOajQbSyKbzbto7+
ozmtN0W80E8n4oQq008j8htpgIhDV91UjF5m33qB82uSqKihHPPTsVcbeg5nZwh2
ti5g/a1jk94=
=JgQo
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
"Boot code changes:
- A large series of changes to reorganize the x86 boot code into a
better isolated and easier to maintain base of PIC early startup
code in arch/x86/boot/startup/, by Ard Biesheuvel.
Motivation & background:
| Since commit
|
| c88d71508e ("x86/boot/64: Rewrite startup_64() in C")
|
| dated Jun 6 2017, we have been using C code on the boot path in a way
| that is not supported by the toolchain, i.e., to execute non-PIC C
| code from a mapping of memory that is different from the one provided
| to the linker. It should have been obvious at the time that this was a
| bad idea, given the need to sprinkle fixup_pointer() calls left and
| right to manipulate global variables (including non-pointer variables)
| without crashing.
|
| This C startup code has been expanding, and in particular, the SEV-SNP
| startup code has been expanding over the past couple of years, and
| grown many of these warts, where the C code needs to use special
| annotations or helpers to access global objects.
This tree includes the first phase of this work-in-progress x86
boot code reorganization.
Scalability enhancements and micro-optimizations:
- Improve code-patching scalability (Eric Dumazet)
- Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR (Andrew Cooper)
CPU features enumeration updates:
- Thorough reorganization and cleanup of CPUID parsing APIs (Ahmed S.
Darwish)
- Fix, refactor and clean up the cacheinfo code (Ahmed S. Darwish,
Thomas Gleixner)
- Update CPUID bitfields to x86-cpuid-db v2.3 (Ahmed S. Darwish)
Memory management changes:
- Allow temporary MMs when IRQs are on (Andy Lutomirski)
- Opt-in to IRQs-off activate_mm() (Andy Lutomirski)
- Simplify choose_new_asid() and generate better code (Borislav
Petkov)
- Simplify 32-bit PAE page table handling (Dave Hansen)
- Always use dynamic memory layout (Kirill A. Shutemov)
- Make SPARSEMEM_VMEMMAP the only memory model (Kirill A. Shutemov)
- Make 5-level paging support unconditional (Kirill A. Shutemov)
- Stop prefetching current->mm->mmap_lock on page faults (Mateusz
Guzik)
- Predict valid_user_address() returning true (Mateusz Guzik)
- Consolidate initmem_init() (Mike Rapoport)
FPU support and vector computing:
- Enable Intel APX support (Chang S. Bae)
- Reorgnize and clean up the xstate code (Chang S. Bae)
- Make task_struct::thread constant size (Ingo Molnar)
- Restore fpu_thread_struct_whitelist() to fix
CONFIG_HARDENED_USERCOPY=y (Kees Cook)
- Simplify the switch_fpu_prepare() + switch_fpu_finish() logic (Oleg
Nesterov)
- Always preserve non-user xfeatures/flags in __state_perm (Sean
Christopherson)
Microcode loader changes:
- Help users notice when running old Intel microcode (Dave Hansen)
- AMD: Do not return error when microcode update is not necessary
(Annie Li)
- AMD: Clean the cache if update did not load microcode (Boris
Ostrovsky)
Code patching (alternatives) changes:
- Simplify, reorganize and clean up the x86 text-patching code (Ingo
Molnar)
- Make smp_text_poke_batch_process() subsume
smp_text_poke_batch_finish() (Nikolay Borisov)
- Refactor the {,un}use_temporary_mm() code (Peter Zijlstra)
Debugging support:
- Add early IDT and GDT loading to debug relocate_kernel() bugs
(David Woodhouse)
- Print the reason for the last reset on modern AMD CPUs (Yazen
Ghannam)
- Add AMD Zen debugging document (Mario Limonciello)
- Fix opcode map (!REX2) superscript tags (Masami Hiramatsu)
- Stop decoding i64 instructions in x86-64 mode at opcode (Masami
Hiramatsu)
CPU bugs and bug mitigations:
- Remove X86_BUG_MMIO_UNKNOWN (Borislav Petkov)
- Fix SRSO reporting on Zen1/2 with SMT disabled (Borislav Petkov)
- Restructure and harmonize the various CPU bug mitigation methods
(David Kaplan)
- Fix spectre_v2 mitigation default on Intel (Pawan Gupta)
MSR API:
- Large MSR code and API cleanup (Xin Li)
- In-kernel MSR API type cleanups and renames (Ingo Molnar)
PKEYS:
- Simplify PKRU update in signal frame (Chang S. Bae)
NMI handling code:
- Clean up, refactor and simplify the NMI handling code (Sohil Mehta)
- Improve NMI duration console printouts (Sohil Mehta)
Paravirt guests interface:
- Restrict PARAVIRT_XXL to 64-bit only (Kirill A. Shutemov)
SEV support:
- Share the sev_secrets_pa value again (Tom Lendacky)
x86 platform changes:
- Introduce the <asm/amd/> header namespace (Ingo Molnar)
- i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to
<asm/amd/fch.h> (Mario Limonciello)
Fixes and cleanups:
- x86 assembly code cleanups and fixes (Uros Bizjak)
- Misc fixes and cleanups (Andi Kleen, Andy Lutomirski, Andy
Shevchenko, Ard Biesheuvel, Bagas Sanjaya, Baoquan He, Borislav
Petkov, Chang S. Bae, Chao Gao, Dan Williams, Dave Hansen, David
Kaplan, David Woodhouse, Eric Biggers, Ingo Molnar, Josh Poimboeuf,
Juergen Gross, Malaya Kumar Rout, Mario Limonciello, Nathan
Chancellor, Oleg Nesterov, Pawan Gupta, Peter Zijlstra, Shivank
Garg, Sohil Mehta, Thomas Gleixner, Uros Bizjak, Xin Li)"
* tag 'x86-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (331 commits)
x86/bugs: Fix spectre_v2 mitigation default on Intel
x86/bugs: Restructure ITS mitigation
x86/xen/msr: Fix uninitialized variable 'err'
x86/msr: Remove a superfluous inclusion of <asm/asm.h>
x86/paravirt: Restrict PARAVIRT_XXL to 64-bit only
x86/mm/64: Make 5-level paging support unconditional
x86/mm/64: Make SPARSEMEM_VMEMMAP the only memory model
x86/mm/64: Always use dynamic memory layout
x86/bugs: Fix indentation due to ITS merge
x86/cpuid: Rename hypervisor_cpuid_base()/for_each_possible_hypervisor_cpuid_base() to cpuid_base_hypervisor()/for_each_possible_cpuid_base_hypervisor()
x86/cpu/intel: Rename CPUID(0x2) descriptors iterator parameter
x86/cacheinfo: Rename CPUID(0x2) descriptors iterator parameter
x86/cpuid: Rename cpuid_get_leaf_0x2_regs() to cpuid_leaf_0x2()
x86/cpuid: Rename have_cpuid_p() to cpuid_feature()
x86/cpuid: Set <asm/cpuid/api.h> as the main CPUID header
x86/cpuid: Move CPUID(0x2) APIs into <cpuid/api.h>
x86/msr: Add rdmsrl_on_cpu() compatibility wrapper
x86/mm: Fix kernel-doc descriptions of various pgtable methods
x86/asm-offsets: Export certain 'struct cpuinfo_x86' fields for 64-bit asm use too
x86/boot: Defer initialization of VM space related global variables
...
Merge updates related to system sleep handling and runtime PM for 6.16-rc1:
- Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja
Kalla).
- Move debug runtime PM attributes to runtime_attrs[] (Rafael Wysocki).
- Add new devm_ functions for enabling runtime PM and runtime PM
reference counting (Bence Csókás).
- Remove size arguments from strscpy() calls in the hibernation core
code (Thorsten Blum).
- Adjust the handling of devices with asynchronous suspend enabled
during system suspend and resume to start resuming them immediately
after resuming their parents and to start suspending such a device
immediately after suspending its first child (Rafael Wysocki).
- Adjust messages printed during tasks freezing to avoid using
pr_cont() (Andrew Sayers, Paul Menzel).
- Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan
Zhang).
- Add missing wakeup source attribute relax_count to sysfs and
remove the space character at the end ofi the string produced by
pm_show_wakelocks() (Zijun Hu).
- Add configurable pm_test delay for hibernation (Zihuan Zhang).
- Disable asynchronous suspend in ucsi_ccg_probe() to prevent the
cypd4226 device on Tegra boards from suspending prematurely (Jon
Hunter).
- Unbreak printing PM debug messages during hibernation and clean up
some related code (Rafael Wysocki).
* pm-runtime:
PM: runtime: fix denying of auto suspend in pm_suspend_timer_fn()
PM: sysfs: Move debug runtime PM attributes to runtime_attrs[]
PM: runtime: Add new devm functions
* pm-sleep:
PM: freezer: Rewrite restarting tasks log to remove stray *done.*
PM: sleep: Introduce pm_sleep_transition_in_progress()
PM: sleep: Introduce pm_suspend_in_progress()
PM: sleep: Print PM debug messages during hibernation
ucsi_ccg: Disable async suspend in ucsi_ccg_probe()
PM: hibernate: add configurable delay for pm_test
PM: wakeup: Delete space in the end of string shown by pm_show_wakelocks()
PM: wakeup: Add missing wakeup source attribute relax_count
PM: sleep: Remove unnecessary !!
PM: sleep: Use two lines for "Restarting..." / "done" messages
PM: sleep: Make suspend of devices more asynchronous
PM: sleep: Suspend async parents after suspending children
PM: sleep: Resume children after resuming the parent
PM: hibernate: Remove size arguments when calling strscpy()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaDBPTgAKCRCRxhvAZXjc
ovkTAP9tyN24Oo+koY/2UedYBxM54cW4BCCRsVmkzfr8NSVdwwD/dg+v6gS8+nyD
3jlR0Z/08UyMHapB7fnAuFxPXXc8oAo=
=e55o
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.16-rc1.writepage' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull final writepage conversion from Christian Brauner:
"This converts vboxfs from ->writepage() to ->writepages().
This was the last user of the ->writepage() method. So remove
->writepage() completely and all references to it"
* tag 'vfs-6.16-rc1.writepage' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: Remove aops->writepage
mm: Remove swap_writepage() and shmem_writepage()
ttm: Call shmem_writeout() from ttm_backup_backup_page()
i915: Use writeback_iter()
shmem: Add shmem_writeout()
writeback: Remove writeback_use_writepage()
migrate: Remove call to ->writepage
vboxsf: Convert to writepages
9p: Add a migrate_folio method
Adjust the enabling/disabling steps of the DP audio SDP splitting
according to a recent Bspec update. This moves the enabling to the audio
codec enable sequence after the transcoder is enabled and disables SDP
splitting explicitly during the audio disable sequence.
Bspec requires waiting for a vblank event after the transcoder is
enabled and before SDP splitting is enabled. There is no need for an
explicit wait for this, since after the transcoder is enabled this
vblank event is guaranteed to have happened via a flip done wait (see
intel_atomic_commit_tail() -> drm_atomic_helper_wait_for_flip_done()).
The bspec update is for LNL+ only, but the HW team clarified that this
has been always the intended sequence on all platforms and bspec will be
updated everywhere accordingly.
The way SDP splitting was originally enabled matched the version of
bspec at that time. Adding here the Fixes: line still, since this
change fixes a FIFO underrun on PTL during output enabling when DSC is
enabled.
Bspec: 49283, 68943
Fixes: 8853750dba ("drm/i915: Enable SDP split for DP2.0")
Cc: Vinod Govindapillai <vinod.govindapillai@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250520142219.1688401-1-imre.deak@intel.com
(cherry picked from commit 56764c845a)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The nvkm_device_tegra_resource() function returns a mix of error pointers
and NULL. The callers only expect it to return NULL on error. Change it
to only return NULL.
Fixes: 76b8f81a5b ("drm/nouveau: improve handling of 64-bit BARs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/dri-devel/334404bdf60765cb5a8e855a74c688bc537531ee.camel@nvidia.com/T/#t
- Make sure to check all forcewakes when dumping mocs
- Fix wrong use of read64 on 32b register
- Synchronize Panther Lake PCI IDs
-----BEGIN PGP SIGNATURE-----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=Ppm2
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-fixes-2025-05-23' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Make sure to check all forcewakes when dumping mocs
- Fix wrong use of read64 on 32b register
- Synchronize Panther Lake PCI IDs
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/uixp5cq7emz32lmwwvq4vbujppugfozhyj3cm2aqzx4lcg7ivn@m2khvf4kvz5p
The newly added driver uses the DSC helper module, but does not
select its Kconfig symbol, so configurations are possible that
cause a link failure:
ERROR: modpost: "drm_dsc_pps_payload_pack" [drivers/gpu/drm/panel/panel-novatek-nt37801.ko] undefined!
Fixes: 4fca684986 ("drm/panel: Add Novatek NT37801 panel driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250523121127.2269693-1-arnd@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
xe_pcode_read() can return back successfully without updating the
variable 'val'. This can cause an arbitrary value to show up in the
sysfs file.
Allow the auto_link_downgrade_status to default to 0 to avoid any
arbitrary value from coming up.
Fixes: 0e414bf7ad ("drm/xe: Expose PCIe link downgrade attributes")
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@intel.com>
Link: https://lore.kernel.org/r/20250516124355.4872-1-aradhya.bhatia@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit a7f87deac2)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Platforms that do not support SLPC are exempted from the GuC PC support.
The GuC PC does not get initialized, and neither do its BOs get created.
This causes a problem because the GuC PC debugfs file is still being
created. Whenever the file is attempted to read, it causes a NULL
pointer dereference on the supposed BO of the GuC PC.
So, make the creation of SLPC debugfs files conditional to when SLPC
features are supported.
Fixes: aaab5404b1 ("drm/xe: Introduce GuC PC debugfs")
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@intel.com>
Link: https://lore.kernel.org/r/20250516141902.5614-1-aradhya.bhatia@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 17486cf3df)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The mtcfg register is a 32-bit register and should therefore be
accessed using xe_mmio_read32().
Other 3 changes per codestyle suggestion:
"
xe_mmio.c:83: CHECK: Alignment should match open parenthesis
xe_mmio.c:131: CHECK: Comparison to NULL could be written "!xe->mmio.regs"
xe_mmio.c:315: CHECK: line length of 103 exceeds 100 columns
"
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://lore.kernel.org/r/20250513153010.3464767-1-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit d2662cf8f4)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
commit 68bfdc8dc0 ("drm/amd: Keep display off while going into S4")
attempted to keep displays off during the S4 sequence by not resuming
display IP. This however leads to hangs because DRM clients such as the
console can try to access registers and cause a hang.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4155
Fixes: 68bfdc8dc0 ("drm/amd: Keep display off while going into S4")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250522141328.115095-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to fetch compute partition related metrics in SMUv13.0.12 SOCs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 81fc9ca25f since it
introduces incompatbility with older firmware
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To unmap and free seq64 memory when drm node close to free vm, if there
is signal accepted, then taking vm lock failed and leaking seq64 va
mapping, and then dmesg has error log "still active bo inside vm".
Change to use uninterruptible lock fix the mapping leaking and no dmesg
error log.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Under specific embedded scenarios, we might still use DP interface
rather than eDP interface. Under such case, detection link training
is unnecessary.
Add a new dcdebugmask value that can be used to skip the detection LT
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Link: https://lore.kernel.org/amd-gfx/20250521063934.2111323-1-Wayne.Lin@amd.com/
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Match what is declared as DPP color caps with hw caps. DCN401 has MPC
shaper + 3D LUTs that are movable before and after blending (get from
plane or stream), but no DPP blend LUTs.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Color gamut_remap state log may be not available for some hw versions,
so prevent null pointer dereference by checking if there is a function
to collect data for this hw version.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When amdgpu_ctx_mgr_fini() calls amdgpu_ctx_mgr_entity_fini() it contains
the exact same "context still alive" check as it will do next. Remove the
duplicated copy.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Function amdgpu_ctx_mgr_entity_fini() only has a single local caller so
lets make it local.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't enable BACO when in passthrough. PCI resets don't work
correctly when in BACO.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
xgmi_port_num interface reports external link number for port number. To
be consistent, use the external link number for reporting other XGMI
link data also.
v2: For invalid link number return -EINVAL (Kevin)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
"ENABLE" is currently misspelled in SYS_INFO_GPUCAPS__ENABEL_DFS_BYPASS
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
"ENABLE" is currently misspelled in SYS_INFO_GPUCAPS__ENABEL_DFS_BYPASS
PS: checkpatch.pl is complaining about the presence of a space at the
start of drivers/gpu/drm/amd/include/atomfirmware.h line: 1716
This is propably because this file uses (two) spaces and not tabs.
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adjust set_value function in hw_hpd.c file to have
prefix to help in ftrace, the name change from
'set_value' to 'dal_hw_hpd_set_value'
Signed-off-by: Leonardo da Silva Gomes <leonardodasigomes@gmail.com>
Co-developed-by: Derick Frias <derick.william.moraes@gmail.com>
Signed-off-by: Derick Frias <derick.william.moraes@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adjust get_value function in hw_hpd.c file to have
prefix to help in ftrace, the name change from
'get_value' to 'dal_hw_hpd_get_value'
Signed-off-by: Leonardo da Silva Gomes <leonardodasigomes@gmail.com>
Co-developed-by: Derick Frias <derick.william.moraes@gmail.com>
Signed-off-by: Derick Frias <derick.william.moraes@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to fetch compute partition related metrics in SMUv13.0.6
SOCs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add sysfs nodes to provide compute paritition specific data.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Helps to keep a build time check about usage of right datatype and
avoids maintenance as new versions get added.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update pmfw headers for smu_v_13_0_6 to include pldm version
as part of statics metrics table
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current cleanup order during file descriptor close can lead to
a race condition where the eviction fence worker attempts to access
a destroyed mutex from the user queue manager:
[ 517.294055] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 517.294060] WARNING: CPU: 8 PID: 2030 at kernel/locking/mutex.c:564
[ 517.294094] Workqueue: events amdgpu_eviction_fence_suspend_worker [amdgpu]
The issue occurs because:
1. We destroy the user queue manager (including its mutex) first
2. Then try to destroy eviction fences which may have pending work
3. The eviction fence worker may try to access the already-destroyed mutex
Fix this by reordering the cleanup to:
1. First mark the fd as closing and destroy eviction fences,
which flushes any pending work
2. Then safely destroy the user queue manager after we're certain
no more fence work will be executed
The copy in amdgpu_driver_postclose_kms() needs to be removed (Christian)
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lock and refer to the eviction fence before the eviction fence
schedules work queue tries to signal it.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Static analysis shows that pointer "svms" cannot be NULL because it points
to the object "struct svm_range_list". Remove the extra NULL check. It is
meaningless and harms the readability of the code.
In the function svm_range_get_info() there is no possibility of failure.
Therefore, the caller of the function svm_range_get_info() does not need
a return value. Change the function svm_range_get_info() return type from
"int" to "void".
Since the function svm_range_get_info() has a return type of "void". The
caller of the function svm_range_get_info() does not need a return value.
Delete extra code.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When an entity from application B is killed, drm_sched_entity_kill()
removes all jobs belonging to that entity through
drm_sched_entity_kill_jobs_work(). If application A's job depends on a
scheduled fence from application B's job, and that fence is not properly
signaled during the killing process, application A's dependency cannot be
cleared.
This leads to application A hanging indefinitely while waiting for a
dependency that will never be resolved. Fix this issue by ensuring that
scheduled fences are properly signaled when an entity is killed, allowing
dependent applications to continue execution.
Signed-off-by: Lin.Cao <lincao12@amd.com>
Reviewed-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250515020713.1110476-1-lincao12@amd.com
Add check for the return value of alloc_ordered_workqueue()
and alloc_workqueue(). Furthermore, if some allocations fail,
cleanup works are added to avoid potential memory leak problem.
Fixes: 40053823ba ("drm/i915/display: move modeset probe/remove functions to intel_display_driver.c")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20d3d096c6a4907636f8a1389b3b4dd753ca356e.1747397638.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit dcab7a228f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Due to a problem in the iTBT DP-in adapter's firmware the sink on a TBT
link may get disconnected inadvertently if the SINK_COUNT_ESI and the
DP_LINK_SERVICE_IRQ_VECTOR_ESI0 registers are read in a single AUX
transaction. Work around the issue by reading these registers in
separate transactions.
The issue affects MTL+ platforms and will be fixed in the DP-in adapter
firmware, however releasing that firmware fix may take some time and is
not guaranteed to be available for all systems. Based on this apply the
workaround on affected platforms.
See HSD #13013007775.
v2: Cc'ing Mika Westerberg.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13760
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14147
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250519133417.1469181-1-imre.deak@intel.com
(cherry picked from commit c3a48363cf)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The PTL XELPDP_PORT_CLOCK_CTL register XELPDP_DDI_CLOCK_SELECT field's
size is 5 bits vs. the earlier platforms where its size is 4 bits. Make
sure the field is read-out/programmed everywhere correctly, according to
the above.
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: stable@vger.kernel.org # v6.13+
Tested-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250512142600.824347-1-imre.deak@intel.com
(cherry picked from commit d0bf684bd4)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
I've used several email addresses and a previous name to contribute.
Consolidate all of these to my primary email and update my name.
Link: https://lkml.kernel.org/r/20250517223237.15647-2-casey.connolly@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgqSbkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGr6sH/1ICAvlin1GuxffE
ISVNz3xhXQpXG2k8yl9r0umpdCfPQbGrxm30vZyuIDNutY/FuMvkIqfu+Z1NnLg0
GidZW015LtXrp7/puKtTnUD5CPSjdETMXig+Q7c1PrxkkmHwz8sBbbm173AIDbDB
t7wwqSEUQh2AIDouGwN+DXB+6bR2FoOXb/k/njmtappIwR3rBc2f1HQJnP095rKO
5AKw1c9DMv5Wq2cEdBOCP48e4CFZEIN1ycW0nvtjpnOmcPOJjLoEothRbntQolqF
udtj5UeTGdAJqmjigv7KHmlrmFNe+GqBq4+beHl5MRxhBaT2uGGaM9jCJiSxT3Jx
sHyYYr8=
=Ddma
-----END PGP SIGNATURE-----
Merge tag 'v6.15-rc7' into x86/core, to pick up fixes
Pick up build fixes from upstream to make this tree more testable.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When DP connected to a device with HDR capability,
the hdr structure was filled.Then connected to another
sink device without hdr capability, but the hdr info
still exist.
Fixes: e85959d6cb ("drm: Parse HDR metadata info from EDID")
Cc: <stable@vger.kernel.org> # v5.3+
Signed-off-by: "feijuan.li" <feijuan.li@samsung.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250514063511.4151780-1-feijuan.li@samsung.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Updates for v6.16
CI:
- uprev mesa
GPU:
- ACD (Adaptive Clock Distribution) support for X1-85. This is required
enable the higher frequencies.
- Drop fictional `address_space_size`. For some older devices, the address
space size is limited to 4GB to avoid potential 64b rollover math problems
in the fw. For these, an `ADRENO_QUIRK_4GB_VA` quirk is added. For
everyone else we get the address space size from the SMMU `ias` (input
address sizes), which is usually 48b.
- Improve robustness when GMU HFI responses time out
- Fix crash when throttling GPU immediately during boot
- Fix for rgb565_predicator on Adreno 7c3
- Remove `MODULE_FIRMWARE()`s for GPU, the GPU can load the firmware after
probe and having partial set of fw (ie. sqe+gmu but not zap) causes problems
MDSS:
- Added SAR2130P support to MDSS driver
DPU:
- Changed to use single CTL path for flushing on DPU 5.x+
- Improved SSPP allocation code to allow sharing of SSPP between planes
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- Misc fixes
DP:
- Switch to use new helpers for DP Audio / HDMI codec handling
- Fixed LTTPR handling
DSI:
- Added support for SA8775P
- Added SAR2130P support
MDP4:
- Fixed LCDC / LVDS controller on
HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/r/CAF6AEGv2Go+nseaEwRgeZbecet-h+Pf2oBKw1CobCF01xu2XVg@mail.gmail.com
Adds basic support for the new display classes available on GB20x GPUs.
Most of the changes here deal with HW method moves, with the only other
change of note being tweaks to skip allocation of CTXDMA objects, which
aren't required on Blackwell display.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Some older NVIDIA and some newer NVIDIA hardware/firmware seems to
have issues with address only transactions (firmware rejects them).
Add an option to the core drm dp to avoid address only transactions,
This just puts the MOT flag removal on the last message of the transfer
and avoids the start of transfer transaction.
This with the flag set in nouveau, allows eDP probing on GB203 device.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This commit adds support for the GB20x GPUs found on GeForce RTX 50xx
series boards.
Beyond a few miscellaneous register moves and HW class ID plumbing,
this reuses most of the code added to support GH100/GB10x.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The doorbell register on GB20x GPUs has additional fields.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This commit enables basic support for the GB100/GB102 Blackwell GPUs.
Beyond HW class ID plumbing there's very little change here vs GH100.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From VOLTA_CHANNEL_GPFIFO_A onwards, HW no longer updates the GET/GP_GET
pointers in USERD following channel progress, but instead updates on a
timer for compatibility, and SW is expected to implement its own method
of tracking channel progress (typically via non-WFI semaphore release).
Nouveau has been making use of the compatibility mode up until now,
however, from BLACKWELL_CHANNEL_GPFIFO_A HW no longer supports USERD
writeback at all.
Allocate a per-channel buffer in system memory, and append a non-WFI
semaphore release to the end of each push buffer segment to simulate
the pointers previously read from USERD.
This change is implemented for Fermi (which is the first to support non-
WFI semaphore release) onwards, as readback from system memory is likely
faster than BAR1 reads.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Primarily a cleanup to allow for changes in newer CHANNEL_GPFIFO classes
to be more easily implemented.
Compared to the prior implementation, this submits userspace push buffer
segments as subroutines and uses the NV_RAMUSERD_TOP_LEVEL_GET registers
to track the main (kernel) push buffer progress.
Fixes a number of sporadic failures seen during piglit runs.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Replace some awkward sequences that are repeated in a number of places
with helper functions.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This commit enables basic support for Hopper GPUs, and is intended
primarily as a base supporting Blackwell GPUs, which reuse most of
the code added here.
Advanced features such as Confidential Compute are not supported.
Beyond a few miscellaneous register moves and HW class ID plumbing,
the bulk of the changes implemented here are to support the GSP-RM
boot sequence used on Hopper/Blackwell GPUs, as well as a new page
table layout.
There should be no changes here that impact prior GPUs.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Co-developed-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
GPUs exist now with a 64-bit BAR0, which mean that BAR1 and BAR2's
indices (as passed to pci_resource_len() etc) are bumped up by one.
Modify nvkm_device.resource_addr/size() to take an enum instead of
an integer bar index, and take IORESOURCE_MEM_64 into account when
translating to the "raw" bar id.
[airlied: fixup ERR_PTR]
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
HOPPER_CHANNEL_GPFIFO_A removes the SEMAPHORE[A-D] methods that are
currently used by nouveau to implement fences on GF100 and newer.
Switch to the newer SEM methods available from VOLTA_CHANNEL_GPFIFO,
which are also available on the Hopper/Blackwell host classes.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Use data from 'struct nvkm_vmm_page/desc' to determine which PDEs need
to be mirrored to RM instead of hardcoded values for pre-Hopper page
tables.
Needed to support Hopper/Blackwell.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The current code using NV90F1_CTRL_CMD_VASPACE_COPY_SERVER_RESERVED_PDES
not only requires changes to support the new page table layout used on
Hopper/Blackwell GPUs, but is also broken in that it always mirrors the
PDEs used for virtual address 0, rather than the area reserved for RM.
This works fine for the non-NVK case where the kernel has full control
of the VMM layout and things end up in the right place, but NVK puts
its kernel reserved area much higher in the address space.
Fixing the code to work at any VA is not enough as some parts of RM want
the reserved area in a specific location, and NVK would then hit other
assertions in RM instead.
Fortunately, it appears that RM never needs to allocate anything within
its reserved area for DRM clients, and the COPY_SERVER_RESERVED_PDES
control call primarily serves to allow RM to locate the root page table
when initialising a channel's instance block.
Flag VMMs allocated by the DRM driver as externally owned, and use
NV0080_CTRL_CMD_DMA_SET_PAGE_DIRECTORY to inform RM of the root page
table in a similar way to NVIDIA's UVM driver.
The COPY_SERVER_RESERVED_PDES paths are kept for the golden context
image and gr scrubber channel, where RM needs the reserved area.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When mirroring BAR2 page tables to RM, we need to know the level shift
for the root page table (which is currently hardcoded), as well as the
raw PDE value (which is currently hardcoded in GP1xx-AD1xx format).
In order to support GH100/GBxxx, modify the code to determine the page
shift from per-GPU info in nvkm_vmm_page, as well as read the relevant
PDE back from the root page table rather than recalculating it.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
GH100/GBxxx have 6-level page tables.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
GH100/GBxxx have moved the register that controls where in VRAM the
the BAR0 NV_PRAMIN window points.
Add a HAL for this, as the BAR0 window is needed for BAR2 bootstrap.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
These registers have moved on GH100/GBxxx, and the GSP-RM init code uses
hardcoded values from earlier GPUs to fill GspSystemInfo.
Replace the per-GPU accessors in nvkm_pci_func with region info, and use
it when initialising GspSystemInfo.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add r570-specific HAL routines, and support loading of GSP-RM version
570.144 if firmware is available.
There should be no impact on r535, or non-GSP paths.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
570.144 has incompatible changes to NV0000_ALLOC_PARAMETERS.
Factor out the common code so it can be shared.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
570.86.15 uses a slightly different calculation for the size of the
sysmem buffer needed to store GSP-RM's vidmem data across suspend.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
565.57.01 has incompatible changes to
NV50VAIO_CHANNELDMA_ALLOCATION_PARAMETERS.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
565.57.01 has incompatible changes to rpc_rc_triggered_v17_02.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
555.42.02 reserves some CHIDs for internal use.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
570.86.16 has incompatible changes to NV_CHANNEL_ALLOC_PARAMS.
At the same time, remove the duplicated channel allocation code from
golden context init.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
555.42.02 has incompatible changes to NV0073_CTRL_CMD_DP_GET_CAPS.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
555.42.02 has incompatible changes to NV0073_CTRL_CMD_SYSTEM_GET_ACTIVE.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
555.42.02 has incompatible changes to
NV0073_CTRL_CMD_SYSTEM_GET_CONNECT_STATE.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
555.42.02 has incompatible changes to
NV0073_CTRL_CMD_SYSTEM_GET_SUPPORTED.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
555.42.02 has incompatible changes to FBSR.
At the same time, move the calling of FBSR functions from the instmem
subdev's suspend/resume paths, to GSP's. This is needed to fix ordering
issues that arise from changes to FBSR in newer RM versions.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
555.42.02 has incompatible changes to GSP_ARGUMENTS_CACHED.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
NV2080_CTRL_CMD_INTERNAL_STATIC_KGR_GET_CONTEXT_BUFFERS_INFO has
incompatible changes in 550.40.07.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
NV2080_CTRL_CMD_INTERNAL_GET_CONSTRUCTED_FALCON_INFO is moved to
NV2080_CTRL_CMD_GPU_GET_CONSTRUCTED_FALCON_INFO in 550.40.07.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
550.40.07 has incompatible changes to RM_ENGINE_TYPE defines.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
550.40.07 has incompatible changes to
NV2080_CTRL_CMD_INTERNAL_DISPLAY_CHANNEL_PUSHBUFFER.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
550.40.07 has incompatible changes to
NV2080_CTRL_CMD_INTERNAL_DISPLAY_GET_STATIC_INFO.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
545.23.06 has incompatible changes to
NV0073_CTRL_CMD_DP_CONFIG_INDEXED_LINK_RATES.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
545.23.06 has incompatible changes to
NV0073_CTRL_SPECIFIC_BACKLIGHT_BRIGHTNESS_PARAMS.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
545.23.06 removes NV_VGPU_MSG_EVENT_GSP_SEND_USER_SHARED_DATA, but has
another event (NVLINK_FAULT_UP) in its place.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
545.23.06 has incompatible changes to MC_ENGINE_IDX definitions.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
545.23.06 has incompatible changes to a number of definitions that
impact the layout of GspStaticConfigInfo.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
545.23.06 has incompatible changes to GspSystemInfo.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
545.23.06 increases the libos3 heap size requirements, and GH100/GBxxx
will need their own implementation entirely.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add header containing defines for RMAPI handles used by NVKM, and
use them in place of magic values when calling RM_ALLOC.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
With minimal to no direct HW programming required, most nvkm_engine
implementations are nearly identical when running on top of GSP-RM.
Add a common implementation of the boilerplate, and use nvkm_rm_gpu to
expose the correct class IDs.
As they're now handled by common code, and there's no support for them
prior to GSP-RM support - this deletes the GA100 NVDEC/NVJPG/OFA HALs,
the GA102 NVENC/OFA HALs, and the AD102 GR/NVDEC/NVENC/NVJPG/OFA HALs.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Use channel class ID from nvkm_rm_gpu, instead of copying it from the
non-GSP HALs.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
