Depending on the memory configuration, isolate_freepages_block() may scan
pages out of the target range and causes panic.
Panic can occur on systems with multiple zones in a single pageblock.
The reason it is rare is that it only happens in special
configurations. Depending on how many similar systems there are, it
may be a good idea to fix this problem for older kernels as well.
The problem is that pfn as argument of fast_isolate_around() could be out
of the target range. Therefore we should consider the case where pfn <
start_pfn, and also the case where end_pfn < pfn.
This problem should have been addressd by the commit 6e2b7044c1 ("mm,
compaction: make fast_isolate_freepages() stay within zone") but there was
an oversight.
Case1: pfn < start_pfn
<at memory compaction for node Y>
| node X's zone | node Y's zone
+-----------------+------------------------------...
pageblock ^ ^ ^
+-----------+-----------+-----------+-----------+...
^ ^ ^
^ ^ end_pfn
^ start_pfn = cc->zone->zone_start_pfn
pfn
<---------> scanned range by "Scan After"
Case2: end_pfn < pfn
<at memory compaction for node X>
| node X's zone | node Y's zone
+-----------------+------------------------------...
pageblock ^ ^ ^
+-----------+-----------+-----------+-----------+...
^ ^ ^
^ ^ pfn
^ end_pfn
start_pfn
<---------> scanned range by "Scan Before"
It seems that there is no good reason to skip nr_isolated pages just after
given pfn. So let perform simple scan from start to end instead of
dividing the scan into "Before" and "After".
Link: https://lkml.kernel.org/r/20221026112438.236336-1-a.naribayashi@fujitsu.com
Fixes: 6e2b7044c1 ("mm, compaction: make fast_isolate_freepages() stay within zone").
Signed-off-by: NARIBAYASHI Akira <a.naribayashi@fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
bdi has two existing knobs to limit the amount of dirty memory:
min_ratio and max_ratio. However the granularity of the knobs is limited
and often it is more convenient to specify limits in terms of bytes.
This change adds the min_bytes knob.
It does not store the min_bytes value, instead it converts the max_bytes
value to a ratio. The value is therefore more an approximation than an
absolute value.
It also maintains the sum over all the bdi min_ratio values stored in
the variable bdi_min_ratio.
Link: https://lkml.kernel.org/r/20221119005215.3052436-14-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This adds a function to return the specified value for min_bytes. It
converts the stored min_ratio of the bdi to the corresponding bytes
value. This is an approximation as it is based on the value that is
returned by global_dirty_limits(), which can change. The returned
value can be different than the value when the min_bytes value was set.
Link: https://lkml.kernel.org/r/20221119005215.3052436-11-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This adds a function to return the specified value for max_bytes. It
converts the stored max_ratio of the bdi to the corresponding bytes
value. It introduces the bdi_get_bytes helper function to do the
conversion. This is an approximation as it is based on the value that is
returned by global_dirty_limits(), which can change. The helper function
will also be used by the min_bytes bdi knob.
Link: https://lkml.kernel.org/r/20221119005215.3052436-6-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To get finer granularity for ratio calculations use part per million
instead of percentiles. This is especially important if we want to
automatically convert byte values to ratios. Otherwise the values that
are actually used can be quite different. This is also important for
machines with more main memory (1% of 256GB is already 2.5GB).
Link: https://lkml.kernel.org/r/20221119005215.3052436-5-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/block: add bdi sysfs knobs", v4.
At meta network block devices (nbd) are used to implement remote block
storage. In testing and during production it has been observed that these
network block devices can consume a huge portion of the dirty writeback
cache and writeback can take a considerable time.
To be able to give stricter limits, I'm proposing the following changes:
1) introduce strictlimit knob
Currently the max_ratio knob exists to limit the dirty_memory. However
this knob only applies once (dirty_ratio + dirty_background_ratio) / 2
has been reached.
With the BDI_CAP_STRICTLIMIT flag, the max_ratio can be applied without
reaching that limit. This change exposes that knob.
This knob can also be useful for NFS, fuse filesystems and USB devices.
2) Use part of 1000000 internal calculation
The max_ratio is based on percentage. With the current machine sizes
percentage values can be very high (1% of a 256GB main memory is already
2.5GB). This change uses part of 1000000 instead of percentages for the
internal calculations.
3) Introduce two new sysfs knobs: min_bytes and max_bytes.
Currently all calculations are based on ratio, but for a user it often
more convenient to specify a limit in bytes. The new knobs will not
store bytes values, instead they will translate the byte value to a
corresponding ratio. As the internal values are now part of 1000, the
ratio is closer to the specified value. However the value should be more
seen as an approximation as it can fluctuate over time.
3) Introduce two new sysfs knobs: min_ratio_fine and max_ratio_fine.
The granularity for the existing sysfs bdi knobs min_ratio and max_ratio
is based on percentage values. The new sysfs bdi knobs min_ratio_fine
and max_ratio_fine allow to specify the ratio as part of 1 million.
This patch (of 20):
This adds the bdi_set_strict_limit function to be able to set/unset the
BDI_CAP_STRICTLIMIT flag.
Link: https://lkml.kernel.org/r/20221119005215.3052436-1-shr@devkernel.io
Link: https://lkml.kernel.org/r/20221119005215.3052436-2-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Chris Mason <clm@meta.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Prevent a kconfig warning that is caused by TEST_MAPLE_TREE by adding a
"depends on" clause for TEST_MAPLE_TREE since 'select' does not follow any
kconfig dependencies.
WARNING: unmet direct dependencies detected for DEBUG_MAPLE_TREE
Depends on [n]: DEBUG_KERNEL [=n]
Selected by [y]:
- TEST_MAPLE_TREE [=y] && RUNTIME_TESTING_MENU [=y]
Link: https://lkml.kernel.org/r/20221119055117.14094-1-rdunlap@infradead.org
Fixes: 120b116208 ("maple_tree: reorganize testing to restore module testing")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The pcp_spin_lock_irqsave protecting the PCP lists is IRQ-safe as a task
allocating from the PCP must not re-enter the allocator from IRQ context.
In each instance where IRQ-reentrancy is possible, the lock is acquired
using pcp_spin_trylock_irqsave() even though IRQs are disabled and
re-entrancy is impossible.
Demote the lock to pcp_spin_lock avoids an IRQ disable/enable in the
common case at the cost of some IRQ allocations taking a slower path. If
the PCP lists need to be refilled, the zone lock still needs to disable
IRQs but that will only happen on PCP refill and drain. If an IRQ is
raised when a PCP allocation is in progress, the trylock will fail and
fallback to using the buddy lists directly. Note that this may not be a
universal win if an interrupt-intensive workload also allocates heavily
from interrupt context and contends heavily on the zone->lock as a result.
[mgorman@techsingularity.net: migratetype might be wrong if a PCP was locked]
Link: https://lkml.kernel.org/r/20221122131229.5263-2-mgorman@techsingularity.net
[yuzhao@google.com: reported lockdep issue on IO completion from softirq]
[hughd@google.com: fix list corruption, lock improvements, micro-optimsations]
Link: https://lkml.kernel.org/r/20221118101714.19590-3-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
hugetlb does not support fake write-faults (write faults without write
permissions). However, we are currently able to trigger a
FAULT_FLAG_WRITE fault on a VMA without VM_WRITE.
If we'd ever want to support FOLL_FORCE|FOLL_WRITE, we'd have to teach
hugetlb to:
(1) Leave the page mapped R/O after the fake write-fault, like
maybe_mkwrite() does.
(2) Allow writing to an exclusive anon page that's mapped R/O when
FOLL_FORCE is set, like can_follow_write_pte(). E.g.,
__follow_hugetlb_must_fault() needs adjustment.
For now, it's not clear if that added complexity is really required.
History tolds us that FOLL_FORCE is dangerous and that we better limit its
use to a bare minimum.
--------------------------------------------------------------------------
#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <unistd.h>
#include <errno.h>
#include <stdint.h>
#include <sys/mman.h>
#include <linux/mman.h>
int main(int argc, char **argv)
{
char *map;
int mem_fd;
map = mmap(NULL, 2 * 1024 * 1024u, PROT_READ,
MAP_PRIVATE|MAP_ANON|MAP_HUGETLB|MAP_HUGE_2MB, -1, 0);
if (map == MAP_FAILED) {
fprintf(stderr, "mmap() failed: %d\n", errno);
return 1;
}
mem_fd = open("/proc/self/mem", O_RDWR);
if (mem_fd < 0) {
fprintf(stderr, "open(/proc/self/mem) failed: %d\n", errno);
return 1;
}
if (pwrite(mem_fd, "0", 1, (uintptr_t) map) == 1) {
fprintf(stderr, "write() succeeded, which is unexpected\n");
return 1;
}
printf("write() failed as expected: %d\n", errno);
return 0;
}
--------------------------------------------------------------------------
Fortunately, we have a sanity check in hugetlb_wp() in place ever since
commit 1d8d14641f ("mm/hugetlb: support write-faults in shared
mappings"), that bails out instead of silently mapping a page writable in
a !PROT_WRITE VMA.
Consequently, above reproducer triggers a warning, similar to the one
reported by szsbot:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 3612 at mm/hugetlb.c:5313 hugetlb_wp+0x20a/0x1af0 mm/hugetlb.c:5313
Modules linked in:
CPU: 1 PID: 3612 Comm: syz-executor250 Not tainted 6.1.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022
RIP: 0010:hugetlb_wp+0x20a/0x1af0 mm/hugetlb.c:5313
Code: ea 03 80 3c 02 00 0f 85 31 14 00 00 49 8b 5f 20 31 ff 48 89 dd 83 e5 02 48 89 ee e8 70 ab b7 ff 48 85 ed 75 5b e8 76 ae b7 ff <0f> 0b 41 bd 40 00 00 00 e8 69 ae b7 ff 48 b8 00 00 00 00 00 fc ff
RSP: 0018:ffffc90003caf620 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000008640070 RCX: 0000000000000000
RDX: ffff88807b963a80 RSI: ffffffff81c4ed2a RDI: 0000000000000007
RBP: 0000000000000000 R08: 0000000000000007 R09: 0000000000000000
R10: 0000000000000000 R11: 000000000008c07e R12: ffff888023805800
R13: 0000000000000000 R14: ffffffff91217f38 R15: ffff88801d4b0360
FS: 0000555555bba300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fff7a47a1b8 CR3: 000000002378d000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
hugetlb_no_page mm/hugetlb.c:5755 [inline]
hugetlb_fault+0x19cc/0x2060 mm/hugetlb.c:5874
follow_hugetlb_page+0x3f3/0x1850 mm/hugetlb.c:6301
__get_user_pages+0x2cb/0xf10 mm/gup.c:1202
__get_user_pages_locked mm/gup.c:1434 [inline]
__get_user_pages_remote+0x18f/0x830 mm/gup.c:2187
get_user_pages_remote+0x84/0xc0 mm/gup.c:2260
__access_remote_vm+0x287/0x6b0 mm/memory.c:5517
ptrace_access_vm+0x181/0x1d0 kernel/ptrace.c:61
generic_ptrace_pokedata kernel/ptrace.c:1323 [inline]
ptrace_request+0xb46/0x10c0 kernel/ptrace.c:1046
arch_ptrace+0x36/0x510 arch/x86/kernel/ptrace.c:828
__do_sys_ptrace kernel/ptrace.c:1296 [inline]
__se_sys_ptrace kernel/ptrace.c:1269 [inline]
__x64_sys_ptrace+0x178/0x2a0 kernel/ptrace.c:1269
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
So let's silence that warning by teaching GUP code that FOLL_FORCE -- so
far -- does not apply to hugetlb.
Note that FOLL_FORCE for read-access seems to be working as expected. The
assumption is that this has been broken forever, only ever since above
commit, we actually detect the wrong handling and WARN_ON_ONCE().
I assume this has been broken at least since 2014, when mm/gup.c came to
life. I failed to come up with a suitable Fixes tag quickly.
Link: https://lkml.kernel.org/r/20221031152524.173644-1-david@redhat.com
Fixes: 1d8d14641f ("mm/hugetlb: support write-faults in shared mappings")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: <syzbot+f0b97304ef90f0d0b1dc@syzkaller.appspotmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
GUP now supports reliable R/O long-term pinning in COW mappings, such
that we break COW early. MAP_SHARED VMAs only use the shared zeropage so
far in one corner case (DAXFS file with holes), which can be ignored
because GUP does not support long-term pinning in fsdax (see
check_vma_flags()).
commit cd5297b085 ("drm/etnaviv: Use FOLL_FORCE for userptr")
documents that FOLL_FORCE | FOLL_WRITE was really only used for reliable
R/O pinning.
Consequently, FOLL_FORCE | FOLL_WRITE | FOLL_LONGTERM is no longer required
for reliable R/O long-term pinning: FOLL_LONGTERM is sufficient. So stop
using FOLL_FORCE, which is really only for ptrace access.
Link: https://lkml.kernel.org/r/20221116102659.70287-15-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: David Airlie <airlied@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
GUP now supports reliable R/O long-term pinning in COW mappings, such
that we break COW early. MAP_SHARED VMAs only use the shared zeropage so
far in one corner case (DAXFS file with holes), which can be ignored
because GUP does not support long-term pinning in fsdax (see
check_vma_flags()).
Consequently, FOLL_FORCE | FOLL_WRITE | FOLL_LONGTERM is no longer required
for reliable R/O long-term pinning: FOLL_LONGTERM is sufficient. So stop
using FOLL_FORCE, which is really only for ptrace access.
Link: https://lkml.kernel.org/r/20221116102659.70287-14-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
GUP now supports reliable R/O long-term pinning in COW mappings, such
that we break COW early. MAP_SHARED VMAs only use the shared zeropage so
far in one corner case (DAXFS file with holes), which can be ignored
because GUP does not support long-term pinning in fsdax (see
check_vma_flags()).
Consequently, FOLL_FORCE | FOLL_WRITE | FOLL_LONGTERM is no longer required
for reliable R/O long-term pinning: FOLL_LONGTERM is sufficient. So stop
using FOLL_FORCE, which is really only for ptrace access.
Link: https://lkml.kernel.org/r/20221116102659.70287-13-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Bernard Metzler <bmt@zurich.ibm.com>
Cc: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
GUP now supports reliable R/O long-term pinning in COW mappings, such
that we break COW early. MAP_SHARED VMAs only use the shared zeropage so
far in one corner case (DAXFS file with holes), which can be ignored
because GUP does not support long-term pinning in fsdax (see
check_vma_flags()).
Consequently, FOLL_FORCE | FOLL_WRITE | FOLL_LONGTERM is no longer required
for reliable R/O long-term pinning: FOLL_LONGTERM is sufficient. So stop
using FOLL_FORCE, which is really only for ptrace access.
Link: https://lkml.kernel.org/r/20221116102659.70287-12-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Christian Benvenuti <benve@cisco.com>
Cc: Nelson Escobar <neescoba@cisco.com>
Cc: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
GUP now supports reliable R/O long-term pinning in COW mappings, such
that we break COW early. MAP_SHARED VMAs only use the shared zeropage so
far in one corner case (DAXFS file with holes), which can be ignored
because GUP does not support long-term pinning in fsdax (see
check_vma_flags()).
Consequently, FOLL_FORCE | FOLL_WRITE | FOLL_LONGTERM is no longer required
for reliable R/O long-term pinning: FOLL_LONGTERM is sufficient. So stop
using FOLL_FORCE, which is really only for ptrace access.
Link: https://lkml.kernel.org/r/20221116102659.70287-11-david@redhat.com
Tested-by: Leon Romanovsky <leonro@nvidia.com> [over mlx4 and mlx5]
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We already support reliable R/O pinning of anonymous memory. However,
assume we end up pinning (R/O long-term) a pagecache page or the shared
zeropage inside a writable private ("COW") mapping. The next write access
will trigger a write-fault and replace the pinned page by an exclusive
anonymous page in the process page tables to break COW: the pinned page no
longer corresponds to the page mapped into the process' page table.
Now that FAULT_FLAG_UNSHARE can break COW on anything mapped into a
COW mapping, let's properly break COW first before R/O long-term
pinning something that's not an exclusive anon page inside a COW
mapping. FAULT_FLAG_UNSHARE will break COW and map an exclusive anon page
instead that can get pinned safely.
With this change, we can stop using FOLL_FORCE|FOLL_WRITE for reliable
R/O long-term pinning in COW mappings.
With this change, the new R/O long-term pinning tests for non-anonymous
memory succeed:
# [RUN] R/O longterm GUP pin ... with shared zeropage
ok 151 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with memfd
ok 152 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with tmpfile
ok 153 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with huge zeropage
ok 154 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with memfd hugetlb (2048 kB)
ok 155 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with memfd hugetlb (1048576 kB)
ok 156 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with shared zeropage
ok 157 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with memfd
ok 158 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with tmpfile
ok 159 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with huge zeropage
ok 160 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with memfd hugetlb (2048 kB)
ok 161 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with memfd hugetlb (1048576 kB)
ok 162 Longterm R/O pin is reliable
Note 1: We don't care about short-term R/O-pinning, because they have
snapshot semantics: they are not supposed to observe modifications that
happen after pinning.
As one example, assume we start direct I/O to read from a page and store
page content into a file: modifications to page content after starting
direct I/O are not guaranteed to end up in the file. So even if we'd pin
the shared zeropage, the end result would be as expected -- getting zeroes
stored to the file.
Note 2: For shared mappings we'll now always fallback to the slow path to
lookup the VMA when R/O long-term pining. While that's the necessary price
we have to pay right now, it's actually not that bad in practice: most
FOLL_LONGTERM users already specify FOLL_WRITE, for example, along with
FOLL_FORCE because they tried dealing with COW mappings correctly ...
Note 3: For users that use FOLL_LONGTERM right now without FOLL_WRITE,
such as VFIO, we'd now no longer pin the shared zeropage. Instead, we'd
populate exclusive anon pages that we can pin. There was a concern that
this could affect the memlock limit of existing setups.
For example, a VM running with VFIO could run into the memlock limit and
fail to run. However, we essentially had the same behavior already in
commit 17839856fd ("gup: document and work around "COW can break either
way" issue") which got merged into some enterprise distros, and there were
not any such complaints. So most probably, we're fine.
Link: https://lkml.kernel.org/r/20221116102659.70287-10-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
