The file contains a spelling error in a source comment (resposne).
Typos in comments reduce readability and make text searches less reliable
for developers and maintainers.
Replace 'resposne' with 'response' in the affected comment. This is a
comment-only cleanup and does not change behavior.
[v2: Removed Fixes: and Cc: to stable tags.]
Signed-off-by: Joseph Salisbury <joseph.salisbury@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Customer reported that some of their krb5 mounts were failing against
a single server as the client was trying to mount the shares with
wrong credentials. It turned out the client was reusing SMB session
from first mount to try mounting the other shares, even though a
different username= option had been specified to the other mounts.
By using username mount option along with sec=krb5 to search for
principals from keytab is supported by cifs.upcall(8) since
cifs-utils-4.8. So fix this by matching username mount option in
match_session() even with Kerberos.
For example, the second mount below should fail with -ENOKEY as there
is no 'foobar' principal in keytab (/etc/krb5.keytab). The client
ends up reusing SMB session from first mount to perform the second
one, which is wrong.
```
$ ktutil
ktutil: add_entry -password -p testuser -k 1 -e aes256-cts
Password for testuser@ZELDA.TEST:
ktutil: write_kt /etc/krb5.keytab
ktutil: quit
$ klist -ke
Keytab name: FILE:/etc/krb5.keytab
KVNO Principal
---- ----------------------------------------------------------------
1 testuser@ZELDA.TEST (aes256-cts-hmac-sha1-96)
$ mount.cifs //w22-root2/scratch /mnt/1 -o sec=krb5,username=testuser
$ mount.cifs //w22-root2/scratch /mnt/2 -o sec=krb5,username=foobar
$ mount -t cifs | grep -Po 'username=\K\w+'
testuser
testuser
```
Reported-by: Oscar Santos <ossantos@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull ceph fixes from Ilya Dryomov:
"A small pile of CephFS and messenger bug fixes, all marked for stable"
* tag 'ceph-for-7.0-rc4' of https://github.com/ceph/ceph-client:
libceph: Fix potential out-of-bounds access in ceph_handle_auth_reply()
libceph: Use u32 for non-negative values in ceph_monmap_decode()
MAINTAINERS: update email address of Dongsheng Yang
libceph: reject preamble if control segment is empty
libceph: admit message frames only in CEPH_CON_S_OPEN state
libceph: prevent potential out-of-bounds reads in process_message_header()
ceph: do not skip the first folio of the next object in writeback
ceph: fix memory leaks in ceph_mdsc_build_path()
ceph: add a bunch of missing ceph_path_info initializers
ceph: fix i_nlink underrun during async unlink
Pull xfs fixes from Carlos Maiolino:
"A couple race fixes found on the new healthmon mechanism, and another
flushing dquots during filesystem shutdown"
* tag 'xfs-fixes-7.0-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix integer overflow in bmap intent sort comparator
xfs: fix undersized l_iclog_roundoff values
xfs: ensure dquot item is deleted from AIL only after log shutdown
xfs: remove redundant set null for ip->i_itemp
xfs: fix returned valued from xfs_defer_can_append
xfs: Remove redundant NULL check after __GFP_NOFAIL
xfs: fix race between healthmon unmount and read_iter
xfs: remove scratch field from struct xfs_gc_bio
Pull smb client fixes from Steve French:
- Fix reconnect when using non-default port
- Fix default retransmission behavior
- Fix open handle reuse in cifs_open
- Fix export for smb2-mapperror-test
- Fix potential corruption on write retry
- Fix potentially uninitialized superblock flags
- Fix missing O_DIRECT and O_SYNC flags on create
* tag 'v7.0-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: make default value of retrans as zero
smb: client: fix open handle lookup in cifs_open()
smb: client: fix iface port assignment in parse_server_interfaces
smb/client: only export symbol for 'smb2maperror-test' module
smb: client: fix in-place encryption corruption in SMB2_write()
smb: client: fix sbflags initialization
smb: client: fix atomic open with O_DIRECT & O_SYNC
Pull NFS client fixes from Anna Schumaker:
- Fix NFS KConfig typos
- Decrement re_receiving on the early exit paths
- return EISDIR on nfs3_proc_create if d_alias is a dir
* tag 'nfs-for-7.0-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Fix NFS KConfig typos
xprtrdma: Decrement re_receiving on the early exit paths
nfs: return EISDIR on nfs3_proc_create if d_alias is a dir
Pull btrfs fixes from David Sterba:
- detect possible file name hash collision earlier so it does not lead
to transaction abort
- handle b-tree leaf overflows when snapshotting a subvolume with set
received UUID, leading to transaction abort
- in zoned mode, reorder relocation block group initialization after
the transaction kthread start
- fix orphan cleanup state tracking of subvolume, this could lead to
invalid dentries under some conditions
- add locking around updates of dynamic reclain state update
- in subpage mode, add missing RCU unlock when trying to releae extent
buffer
- remap tree fixes:
- add missing description strings for the newly added remap tree
- properly update search key when iterating backrefs
* tag 'for-7.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: remove duplicated definition of btrfs_printk_in_rcu()
btrfs: remove unnecessary transaction abort in the received subvol ioctl
btrfs: abort transaction on failure to update root in the received subvol ioctl
btrfs: fix transaction abort on set received ioctl due to item overflow
btrfs: fix transaction abort when snapshotting received subvolumes
btrfs: fix transaction abort on file creation due to name hash collision
btrfs: read key again after incrementing slot in move_existing_remaps()
btrfs: add missing RCU unlock in error path in try_release_subpage_extent_buffer()
btrfs: set BTRFS_ROOT_ORPHAN_CLEANUP during subvol create
btrfs: zoned: move btrfs_zoned_reserve_data_reloc_bg() after kthread start
btrfs: hold space_info->lock when clearing periodic reclaim ready
btrfs: print-tree: add remap tree definitions
When retrans mount option was introduced, the default value was set
as 1. However, in the light of some bugs that this has exposed recently
we should change it to 0 and retain the old behaviour before this option
was introduced.
Cc: <stable@vger.kernel.org>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When looking up open handles to be re-used in cifs_open(), calling
cifs_get_{writable,readable}_path() is wrong as it will look up for
the first matching open handle, and if @file->f_flags doesn't match,
it will ignore the remaining open handles in
cifsInodeInfo::openFileList that might potentially match
@file->f_flags.
For writable and readable handles, fix this by calling
__cifs_get_writable_file() and __find_readable_file(), respectively,
with FIND_OPEN_FLAGS set.
With the patch, the following program ends up with two opens instead
of three sent over the wire.
```
#define _GNU_SOURCE
#include <unistd.h>
#include <string.h>
#include <fcntl.h>
int main(int argc, char *argv[])
{
int fd;
fd = open("/mnt/1/foo", O_CREAT | O_WRONLY | O_TRUNC, 0664);
close(fd);
fd = open("/mnt/1/foo", O_DIRECT | O_WRONLY);
close(fd);
fd = open("/mnt/1/foo", O_WRONLY);
close(fd);
fd = open("/mnt/1/foo", O_DIRECT | O_WRONLY);
close(fd);
return 0;
}
```
```
$ mount.cifs //srv/share /mnt/1 -o ...
$ gcc test.c && ./a.out
```
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
parse_server_interfaces() initializes interface socket addresses with
CIFS_PORT. When the mount uses a non-default port this overwrites the
configured destination port.
Later, cifs_chan_update_iface() copies this sockaddr into server->dstaddr,
causing reconnect attempts to use the wrong port after server interface
updates.
Use the existing port from server->dstaddr instead.
Cc: stable@vger.kernel.org
Fixes: fe856be475 ("CIFS: parse and store info on iface queries")
Tested-by: Dr. Thomas Orgis <thomas.orgis@uni-hamburg.de>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
xfs_bmap_update_diff_items() sorts bmap intents by inode number using
a subtraction of two xfs_ino_t (uint64_t) values, with the result
truncated to int. This is incorrect when two inode numbers differ by
more than INT_MAX (2^31 - 1), which is entirely possible on large XFS
filesystems.
Fix this by replacing the subtraction with cmp_int().
Cc: <stable@vger.kernel.org> # v4.9
Fixes: 9f3afb57d5 ("xfs: implement deferred bmbt map/unmap operations")
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Only export smb2_get_err_map_test smb2_error_map_table_test and
smb2_error_map_num symbol for 'smb2maperror-test' module.
Fixes: 7d0bf050a5 ("smb/client: make SMB2 maperror KUnit tests a separate module")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB2_write() places write payload in iov[1..n] as part of rq_iov.
smb3_init_transform_rq() pointer-shares rq_iov, so crypt_message()
encrypts iov[1] in-place, replacing the original plaintext with
ciphertext. On a replayable error, the retry sends the same iov[1]
which now contains ciphertext instead of the original data,
resulting in corruption.
The corruption is most likely to be observed when connections are
unstable, as reconnects trigger write retries that re-send the
already-encrypted data.
This affects SFU mknod, MF symlinks, etc. On kernels before
6.10 (prior to the netfs conversion), sync writes also used
this path and were similarly affected. The async write path
wasn't unaffected as it uses rq_iter which gets deep-copied.
Fix by moving the write payload into rq_iter via iov_iter_kvec(),
so smb3_init_transform_rq() deep-copies it before encryption.
Cc: stable@vger.kernel.org #6.3+
Acked-by: Henrique Carvalho <henrique.carvalho@suse.com>
Acked-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The newly introduced variable is initialized in an #ifdef block
but used outside of it, leading to undefined behavior when
CONFIG_CIFS_ALLOW_INSECURE_LEGACY is disabled:
fs/smb/client/dir.c:417:9: error: variable 'sbflags' is uninitialized when used here [-Werror,-Wuninitialized]
417 | if (sbflags & CIFS_MOUNT_DYNPERM)
| ^~~~~~~
Move the initialization into the declaration, the same way as the
other similar function do it.
Fixes: 4fc3a433c1 ("smb: client: use atomic_t for mnt_cifs_flags")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When user application requests O_DIRECT|O_SYNC along with O_CREAT on
open(2), CREATE_NO_BUFFER and CREATE_WRITE_THROUGH bits were missed in
CREATE request when performing an atomic open, thus leading to
potentially data integrity issues.
Fix this by setting those missing bits in CREATE request when
O_DIRECT|O_SYNC has been specified in cifs_do_create().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Henrique Carvalho <henrique.carvalho@suse.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
If the superblock doesn't list a log stripe unit, we set the incore log
roundoff value to 512. This leads to corrupt logs and unmountable
filesystems in generic/617 on a disk with 4k physical sectors...
XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c
XFS (sda1): Torn write (CRC failure) detected at log block 0x318e. Truncating head block from 0x3197.
XFS (sda1): failed to locate log tail
XFS (sda1): log mount/recovery failed: error -74
XFS (sda1): log mount failed
XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c
XFS (sda1): Ending clean mount
...on the current xfsprogs for-next which has a broken mkfs. xfs_info
shows this...
meta-data=/dev/sda1 isize=512 agcount=4, agsize=644992 blks
= sectsz=4096 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=1
= reflink=1 bigtime=1 inobtcount=1 nrext64=1
= exchange=1 metadir=1
data = bsize=4096 blocks=2579968, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1, parent=1
log =internal log bsize=4096 blocks=16384, version=2
= sectsz=4096 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
= rgcount=0 rgsize=268435456 extents
= zoned=0 start=0 reserved=0
...observe that the log section has sectsz=4096 sunit=0, which means
that the roundoff factor is 512, not 4096 as you'd expect. We should
fix mkfs not to generate broken filesystems, but anyone can fuzz the
ondisk superblock so we should be more cautious. I think the inadequate
logic predates commit a6a65fef5e, but that's clearly going to
require a different backport.
Cc: stable@vger.kernel.org # v5.14
Fixes: a6a65fef5e ("xfs: log stripe roundoff is a property of the log")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
In xfs_qm_dqflush(), when a dquot flush fails due to corruption
(the out_abort error path), the original code removed the dquot log
item from the AIL before calling xfs_force_shutdown(). This ordering
introduces a subtle race condition that can lead to data loss after
a crash.
The AIL tracks the oldest dirty metadata in the journal. The position
of the tail item in the AIL determines the log tail LSN, which is the
oldest LSN that must be preserved for crash recovery. When an item is
removed from the AIL, the log tail can advance past the LSN of that item.
The race window is as follows: if the dquot item happens to be at
the tail of the log, removing it from the AIL allows the log tail
to advance. If a concurrent log write is sampling the tail LSN at
the same time and subsequently writes a complete checkpoint (i.e.,
one containing a commit record) to disk before the shutdown takes
effect, the journal will no longer protect the dquot's last
modification. On the next mount, log recovery will not replay the
dquot changes, even though they were never written back to disk,
resulting in silent data loss.
Fix this by calling xfs_force_shutdown() before xfs_trans_ail_delete()
in the out_abort path. Once the log is shut down, no new log writes
can complete with an updated tail LSN, making it safe to remove the
dquot item from the AIL.
Cc: stable@vger.kernel.org
Fixes: b707fffda6 ("xfs: abort consistently on dquot flush failure")
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
ip->i_itemp has been set null in xfs_inode_item_destroy(), so there is
no need set it null again in xfs_inode_free_callback().
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
When `ceph_process_folio_batch` encounters a folio past the end of the
current object, it should leave it in the batch so that it is picked up
in the next iteration.
Removing the folio from the batch means that it does not get written
back and remains dirty instead. This makes `fsync()` silently skip some
of the data, delays capability release, and breaks coherence with
`O_DIRECT`.
The link below contains instructions for reproducing the bug.
Cc: stable@vger.kernel.org
Fixes: ce80b76dd3 ("ceph: introduce ceph_process_folio_batch() method")
Link: https://tracker.ceph.com/issues/75156
Signed-off-by: Hristo Venev <hristo@venev.name>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add __putname() calls to error code paths that did not free the "path"
pointer obtained by __getname(). If ownership of this pointer is not
passed to the caller via path_info.path, the function must free it
before returning.
Cc: stable@vger.kernel.org
Fixes: 3fd945a79e ("ceph: encode encrypted name in ceph_mdsc_build_path and dentry release")
Fixes: 550f7ca98e ("ceph: give up on paths longer than PATH_MAX")
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_mdsc_build_path() must be called with a zero-initialized
ceph_path_info parameter, or else the following
ceph_mdsc_free_path_info() may crash.
Example crash (on Linux 6.18.12):
virt_to_cache: Object is not a Slab page!
WARNING: CPU: 184 PID: 2871736 at mm/slub.c:6732 kmem_cache_free+0x316/0x400
[...]
Call Trace:
[...]
ceph_open+0x13d/0x3e0
do_dentry_open+0x134/0x480
vfs_open+0x2a/0xe0
path_openat+0x9a3/0x1160
[...]
cache_from_obj: Wrong slab cache. names_cache but object is from ceph_inode_info
WARNING: CPU: 184 PID: 2871736 at mm/slub.c:6746 kmem_cache_free+0x2dd/0x400
[...]
kernel BUG at mm/slub.c:634!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
RIP: 0010:__slab_free+0x1a4/0x350
Some of the ceph_mdsc_build_path() callers had initializers, but
others had not, even though they were all added by commit 15f519e9f8
("ceph: fix race condition validating r_parent before applying state").
The ones without initializer are suspectible to random crashes. (I can
imagine it could even be possible to exploit this bug to elevate
privileges.)
Unfortunately, these Ceph functions are undocumented and its semantics
can only be derived from the code. I see that ceph_mdsc_build_path()
initializes the structure only on success, but not on error.
Calling ceph_mdsc_free_path_info() after a failed
ceph_mdsc_build_path() call does not even make sense, but that's what
all callers do, and for it to be safe, the structure must be
zero-initialized. The least intrusive approach to fix this is
therefore to add initializers everywhere.
Cc: stable@vger.kernel.org
Fixes: 15f519e9f8 ("ceph: fix race condition validating r_parent before applying state")
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
During async unlink, we drop the `i_nlink` counter before we receive
the completion (that will eventually update the `i_nlink`) because "we
assume that the unlink will succeed". That is not a bad idea, but it
races against deletions by other clients (or against the completion of
our own unlink) and can lead to an underrun which emits a WARNING like
this one:
WARNING: CPU: 85 PID: 25093 at fs/inode.c:407 drop_nlink+0x50/0x68
Modules linked in:
CPU: 85 UID: 3221252029 PID: 25093 Comm: php-cgi8.1 Not tainted 6.14.11-cm4all1-ampere #655
Hardware name: Supermicro ARS-110M-NR/R12SPD-A, BIOS 1.1b 10/17/2023
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drop_nlink+0x50/0x68
lr : ceph_unlink+0x6c4/0x720
sp : ffff80012173bc90
x29: ffff80012173bc90 x28: ffff086d0a45aaf8 x27: ffff0871d0eb5680
x26: ffff087f2a64a718 x25: 0000020000000180 x24: 0000000061c88647
x23: 0000000000000002 x22: ffff07ff9236d800 x21: 0000000000001203
x20: ffff07ff9237b000 x19: ffff088b8296afc0 x18: 00000000f3c93365
x17: 0000000000070000 x16: ffff08faffcbdfe8 x15: ffff08faffcbdfec
x14: 0000000000000000 x13: 45445f65645f3037 x12: 34385f6369706f74
x11: 0000a2653104bb20 x10: ffffd85f26d73290 x9 : ffffd85f25664f94
x8 : 00000000000000c0 x7 : 0000000000000000 x6 : 0000000000000002
x5 : 0000000000000081 x4 : 0000000000000481 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff08727d3f91e8
Call trace:
drop_nlink+0x50/0x68 (P)
vfs_unlink+0xb0/0x2e8
do_unlinkat+0x204/0x288
__arm64_sys_unlinkat+0x3c/0x80
invoke_syscall.constprop.0+0x54/0xe8
do_el0_svc+0xa4/0xc8
el0_svc+0x18/0x58
el0t_64_sync_handler+0x104/0x130
el0t_64_sync+0x154/0x158
In ceph_unlink(), a call to ceph_mdsc_submit_request() submits the
CEPH_MDS_OP_UNLINK to the MDS, but does not wait for completion.
Meanwhile, between this call and the following drop_nlink() call, a
worker thread may process a CEPH_CAP_OP_IMPORT, CEPH_CAP_OP_GRANT or
just a CEPH_MSG_CLIENT_REPLY (the latter of which could be our own
completion). These will lead to a set_nlink() call, updating the
`i_nlink` counter to the value received from the MDS. If that new
`i_nlink` value happens to be zero, it is illegal to decrement it
further. But that is exactly what ceph_unlink() will do then.
The WARNING can be reproduced this way:
1. Force async unlink; only the async code path is affected. Having
no real clue about Ceph internals, I was unable to find out why the
MDS wouldn't give me the "Fxr" capabilities, so I patched
get_caps_for_async_unlink() to always succeed.
(Note that the WARNING dump above was found on an unpatched kernel,
without this kludge - this is not a theoretical bug.)
2. Add a sleep call after ceph_mdsc_submit_request() so the unlink
completion gets handled by a worker thread before drop_nlink() is
called. This guarantees that the `i_nlink` is already zero before
drop_nlink() runs.
The solution is to skip the counter decrement when it is already zero,
but doing so without a lock is still racy (TOCTOU). Since
ceph_fill_inode() and handle_cap_grant() both hold the
`ceph_inode_info.i_ceph_lock` spinlock while set_nlink() runs, this
seems like the proper lock to protect the `i_nlink` updates.
I found prior art in NFS and SMB (using `inode.i_lock`) and AFS (using
`afs_vnode.cb_lock`). All three have the zero check as well.
Cc: stable@vger.kernel.org
Fixes: 2ccb45462a ("ceph: perform asynchronous unlink if we have sufficient caps")
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When KSMBD_DEBUG_AUTH logging is enabled, generate_smb3signingkey() and
generate_smb3encryptionkey() log the session, signing, encryption, and
decryption key bytes. Remove the logs to avoid exposing credentials.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
opinfo pointer obtained via rcu_dereference(fp->f_opinfo) is being
accessed after rcu_read_unlock() has been called. This creates a
race condition where the memory could be freed by a concurrent
writer between the unlock and the subsequent pointer dereferences
(opinfo->is_lease, etc.), leading to a use-after-free.
Fixes: 5fb282ba4f ("ksmbd: fix possible null-deref in smb_lazy_parent_lease_break_close")
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd currently frees oplock_info immediately using kfree(), even
though it is accessed under RCU read-side critical sections in places
like opinfo_get() and proc_show_files().
Since there is no RCU grace period delay between nullifying the pointer
and freeing the memory, a reader can still access oplock_info
structure after it has been freed. This can leads to a use-after-free
especially in opinfo_get() where atomic_inc_not_zero() is called on
already freed memory.
Fix this by switching to deferred freeing using call_rcu().
Fixes: 18b4fac5ef ("ksmbd: fix use-after-free in smb_break_all_levII_oplock()")
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The opinfo pointer obtained via rcu_dereference(fp->f_opinfo) is
dereferenced after rcu_read_unlock(), creating a use-after-free
window. A concurrent opinfo_put() can free the opinfo between the
unlock and the subsequent access to opinfo->is_lease,
opinfo->o_lease->state, and opinfo->level.
Fix this by deferring rcu_read_unlock() until after all opinfo
field accesses are complete. The values needed (const_names, count,
level) are copied into local variables under the RCU read lock,
and the potentially-sleeping seq_printf calls happen after the
lock is released.
Found by AI-assisted code review (Claude Opus 4.6, Anthropic)
in collaboration with Ali Khaledi.
Cc: stable@vger.kernel.org
Fixes: b38f99c121 ("ksmbd: add procfs interface for runtime monitoring and statistics")
Signed-off-by: Ali Khaledi <ali.khaledi1989@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If ksmbd_override_fsids() fails, we jump to err_out2. At that point, fp is
NULL because it hasn't been assigned dh_info.fp yet, so ksmbd_fd_put(work,
fp) will not be called. However, dh_info.fp was already inserted into the
session file table by ksmbd_reopen_durable_fd(), so it will leak in the
session file table until the session is closed.
Move fp = dh_info.fp; ahead of the ksmbd_override_fsids() check to fix the
problem.
Found by an experimental AI code review agent at Google.
Fixes: c8efcc7861 ("ksmbd: add support for durable handles v1/v2")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull smb client fixes from Steve French:
- Fix potential oops on open failure
- Fix unmount to better free deferred closes
- Use proper constant-time MAC comparison function
- Two buffer allocation size fixes
- Two minor cleanups
- make SMB2 kunit tests a distinct module
* tag 'v7.0-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix oops due to uninitialised var in smb2_unlink()
cifs: open files should not hold ref on superblock
smb: client: Compare MACs in constant time
smb/client: remove unused SMB311_posix_query_info()
smb/client: fix buffer size for smb311_posix_qinfo in SMB311_posix_query_info()
smb/client: fix buffer size for smb311_posix_qinfo in smb2_compound_op()
smb: update some doc references
smb/client: make SMB2 maperror KUnit tests a separate module
If SMB2_open_init() or SMB2_close_init() fails (e.g. reconnect), the
iovs set @rqst will be left uninitialised, hence calling
SMB2_open_free(), SMB2_close_free() or smb2_set_related() on them will
oops.
Fix this by initialising @close_iov and @open_iov before setting them
in @rqst.
Reported-by: Thiago Becker <tbecker@redhat.com>
Fixes: 1cf9f2a6a5 ("smb: client: handle unlink(2) of files open by different clients")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull fsverity fix from Eric Biggers:
"Prevent CONFIG_FS_VERITY from being enabled when the page size is
256K, since it doesn't work in that case"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: add dependency on 64K or smaller pages
kzalloc() is called with __GFP_NOFAIL, so a NULL return is not expected.
Drop the redundant !map check in xfs_dabuf_map().
Also switch the nirecs-sized allocation to kcalloc().
Signed-off-by: hongao <hongao@uniontech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Today whenever we deal with a file, in addition to holding
a reference on the dentry, we also get a reference on the
superblock. This happens in two cases:
1. when a new cinode is allocated
2. when an oplock break is being processed
The reasoning for holding the superblock ref was to make sure
that when umount happens, if there are users of inodes and
dentries, it does not try to clean them up and wait for the
last ref to superblock to be dropped by last of such users.
But the side effect of doing that is that umount silently drops
a ref on the superblock and we could have deferred closes and
lease breaks still holding these refs.
Ideally, we should ensure that all of these users of inodes and
dentries are cleaned up at the time of umount, which is what this
code is doing.
This code change allows these code paths to use a ref on the
dentry (and hence the inode). That way, umount is
ensured to clean up SMB client resources when it's the last
ref on the superblock (For ex: when same objects are shared).
The code change also moves the call to close all the files in
deferred close list to the umount code path. It also waits for
oplock_break workers to be flushed before calling
kill_anon_super (which eventually frees up those objects).
Fixes: 24261fc23d ("cifs: delay super block destruction until all cifsFileInfo objects are gone")
Fixes: 705c79101c ("smb: client: fix use-after-free in cifs_oplock_break")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Filesystems should never provide a delayed allocation mapping to
writeback; they're supposed to allocate the space before replying.
This can lead to weird IO errors and crashes in the block layer if the
filesystem is being malicious, or if it hadn't set iomap->dev because
it's a delalloc mapping.
Fix this by failing writeback on delalloc mappings. Currently no
filesystems actually misbehave in this manner, but we ought to be
stricter about things like that.
Cc: stable@vger.kernel.org # v5.5
Fixes: 598ecfbaa7 ("iomap: lift the xfs writeback code to iomap")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/20260302173002.GL13829@frogsfrogsfrogs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
If a folio has ifs metadata attached to it and the folio is partially
read in through an async IO helper with the rest of it then being read
in through post-EOF zeroing or as inline data, and the helper
successfully finishes the read first, then post-EOF zeroing / reading
inline will mark the folio as uptodate in iomap_set_range_uptodate().
This is a problem because when the read completion path later calls
iomap_read_end(), it will call folio_end_read(), which sets the uptodate
bit using XOR semantics. Calling folio_end_read() on a folio that was
already marked uptodate clears the uptodate bit.
Fix this by not marking the folio as uptodate if the read IO has bytes
pending. The folio uptodate state will be set in the read completion
path through iomap_end_read() -> folio_end_read().
Reported-by: Wei Gao <wegao@suse.com>
Suggested-by: Sasha Levin <sashal@kernel.org>
Tested-by: Wei Gao <wegao@suse.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: stable@vger.kernel.org # v6.19
Link: https://lore.kernel.org/linux-fsdevel/aYbmy8JdgXwsGaPP@autotest-wegao.qe.prg2.suse.org/
Fixes: b2f35ac414 ("iomap: add caller-provided callbacks for read and readahead")
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://patch.msgid.link/20260303233420.874231-2-joannelkoong@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
xfs/1879 on one of my test VMs got stuck due to the xfs_io healthmon
subcommand sleeping in wait_event_interruptible at:
xfs_healthmon_read_iter+0x558/0x5f8 [xfs]
vfs_read+0x248/0x320
ksys_read+0x78/0x120
Looking at xfs_healthmon_read_iter, in !O_NONBLOCK mode it will sleep
until the mount cookie == DETACHED_MOUNT_COOKIE, there are events
waiting to be formatted, or there are formatted events in the read
buffer that could be copied to userspace.
Poking into the running kernel, I see that there are zero events in the
list, the read buffer is empty, and the mount cookie is indeed in
DETACHED state. IOWs, xfs_healthmon_has_eventdata should have returned
true, but instead we're asleep waiting for a wakeup.
I think what happened here is that xfs_healthmon_read_iter and
xfs_healthmon_unmount were racing with each other, and _read_iter lost
the race. _unmount queued an unmount event, which woke up _read_iter.
It found, formatted, and copied the event out to userspace. That
cleared out the pending event list and emptied the read buffer. xfs_io
then called read() again, so _has_eventdata decided that we should sleep
on the empty event queue.
Next, _unmount called xfs_healthmon_detach, which set the mount cookie
to DETACHED. Unfortunately, it didn't call wake_up_all on the hm, so
the wait_event_interruptible in the _read_iter thread remains asleep.
That's why the test stalled.
Fix this by moving the wake_up_all call to xfs_healthmon_detach.
Fixes: b3a289a2a9 ("xfs: create event queuing, formatting, and discovery infrastructure")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The scratch field in struct xfs_gc_bio is unused. Remove it.
Fixes: 102f444b57 ("xfs: rework zone GC buffer management")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
To prevent timing attacks, MAC comparisons need to be constant-time.
Replace the memcmp() with the correct function, crypto_memneq().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB311_posix_query_info() is currently unused, but it may still be used in
some stable versions, so these changes are submitted as a separate patch.
Use `sizeof(struct smb311_posix_qinfo)` instead of sizeof its pointer,
so the allocated buffer matches the actual struct size.
Fixes: b1bc1874b8 ("smb311: Add support for SMB311 query info (non-compounded)")
Reported-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use `sizeof(struct smb311_posix_qinfo)` instead of sizeof its pointer,
so the allocated buffer matches the actual struct size.
Fixes: 6a5f6592a0 ("SMB311: Add support for query info using posix extensions (level 100)")
Reported-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull btrfs fixes from David Sterba:
"One-liner or short fixes for minor/moderate problems reported recently:
- fixes or level adjustments of error messages
- fix leaked transaction handles after aborted transactions, when
using the remap tree feature
- fix a few leaked chunk maps after errors
- fix leaked page array in io_uring encoded read if an error occurs
and the 'finished' is not called
- fix double release of reserved extents when doing a range COW
- don't commit super block when the filesystem is in shutdown state
- fix squota accounting condition when checking members vs parent
usage
- other error handling fixes"
* tag 'for-7.0-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: check block group lookup in remove_range_from_remap_tree()
btrfs: fix transaction handle leaks in btrfs_last_identity_remap_gone()
btrfs: fix chunk map leak in btrfs_map_block() after btrfs_translate_remap()
btrfs: fix chunk map leak in btrfs_map_block() after btrfs_chunk_map_num_copies()
btrfs: fix compat mask in error messages in btrfs_check_features()
btrfs: print correct subvol num if active swapfile prevents deletion
btrfs: fix warning in scrub_verify_one_metadata()
btrfs: fix objectid value in error message in check_extent_data_ref()
btrfs: fix incorrect key offset in error message in check_dev_extent_item()
btrfs: fix error message order of parameters in btrfs_delete_delayed_dir_index()
btrfs: don't commit the super block when unmounting a shutdown filesystem
btrfs: free pages on error in btrfs_uring_read_extent()
btrfs: fix referenced/exclusive check in squota_check_parent_usage()
btrfs: remove pointless WARN_ON() in cache_save_setup()
btrfs: convert log messages to error level in btrfs_replay_log()
btrfs: remove btrfs_handle_fs_error() after failure to recover log trees
btrfs: remove redundant warning message in btrfs_check_uuid_tree()
btrfs: change warning messages to error level in open_ctree()
btrfs: fix a double release on reserved extents in cow_one_range()
btrfs: handle discard errors in in btrfs_finish_extent_commit()
If we fail to remove an item from the uuid tree, we don't need to abort
the transaction since we have not done any change before. So remove that
transaction abort.
Reviewed-by: Anand Jain <asj@kernel.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we failed to update the root we don't abort the transaction, which is
wrong since we already used the transaction to remove an item from the
uuid tree.
Fixes: dd5f9615fc ("Btrfs: maintain subvolume items in the UUID tree")
CC: stable@vger.kernel.org # 3.12+
Reviewed-by: Anand Jain <asj@kernel.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If the set received ioctl fails due to an item overflow when attempting to
add the BTRFS_UUID_KEY_RECEIVED_SUBVOL we have to abort the transaction
since we did some metadata updates before.
This means that if a user calls this ioctl with the same received UUID
field for a lot of subvolumes, we will hit the overflow, trigger the
transaction abort and turn the filesystem into RO mode. A malicious user
could exploit this, and this ioctl does not even requires that a user
has admin privileges (CAP_SYS_ADMIN), only that he/she owns the subvolume.
Fix this by doing an early check for item overflow before starting a
transaction. This is also race safe because we are holding the subvol_sem
semaphore in exclusive (write) mode.
A test case for fstests will follow soon.
Fixes: dd5f9615fc ("Btrfs: maintain subvolume items in the UUID tree")
CC: stable@vger.kernel.org # 3.12+
Reviewed-by: Anand Jain <asj@kernel.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
