A sentence that checks for later spec version is meant for developers
hacking the documentation source. Make it comment block (hidden from
actual output).
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Message-Id: <20221220095828.27588-4-bagasdotme@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This new ioctl adds support for resuming the device from userspace.
This is required when trying to restore the device in a functioning
state after it's been suspended. It is already possible to reset a
suspended device, but that means the device must be reconfigured and
all the IOMMU/IOTLB mappings must be recreated. This new operation
allows the device to be resumed without going through a full reset.
This is particularly useful when trying to perform offline migration of
a virtual machine (also known as snapshot/restore) as it allows the VMM
to resume the virtual machine back to a running state after the snapshot
is performed.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Message-Id: <73b75fb87d25cff59768b4955a81fe7ffe5b4770.1672742878.git.sebastien.boeuf@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Add a new operation to allow a vDPA device to be resumed after it has
been suspended. Trying to resume a device that wasn't suspended will
result in a no-op.
This operation is optional. If it's not implemented, the associated
backend feature bit will not be exposed. And if the feature bit is not
exposed, invoking this operation will return an error.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Message-Id: <6e05c4b31b47f3e29cb2bd7ebd56c81f84b8f48a.1672742878.git.sebastien.boeuf@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
This patch fixes a FLR bug on the SNET DPU rev 1 by setting the
PCI_DEV_FLAGS_NO_FLR_RESET flag.
As there is a quirk to avoid FLR (quirk_no_flr), I added a new quirk
to check the rev ID before calling to quirk_no_flr.
Without this patch, a SNET DPU rev 1 may hang when FLR is applied.
Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Message-Id: <20230110165638.123745-3-alvaro.karsz@solid-run.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO_NET_S_LINK_UP is already returned in config reads since vdpasim
creation, but the feature bit was not offered to the driver.
Tested modifying VIRTIO_NET_S_LINK_UP and different values of "status"
in qemu virtio-net options, using vhost_vdpa.
Not considering as a fix, because there should be no driver trusting in
this config read before the feature flag.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20221117155502.1394700-1-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
This commit implements features provisioning for ifcvf, that means:
1)checkk whether the provisioned features are supported by
the management device
2)vDPA device only presents selected feature bits
Examples:
a)The management device supported features:
$ vdpa mgmtdev show pci/0000:01:00.5
pci/0000:01:00.5:
supported_classes net
max_supported_vqs 9
dev_features MTU MAC MRG_RXBUF CTRL_VQ MQ ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
b)Provision a vDPA device with all supported features:
$ vdpa dev add name vdpa0 mgmtdev pci/0000:01:00.5
$ vdpa/vdpa dev config show vdpa0
vdpa0: mac 00:e8:ca:11:be:05 link up link_announce false max_vq_pairs 4 mtu 1500
negotiated_features MRG_RXBUF CTRL_VQ MQ VERSION_1 ACCESS_PLATFORM
c)Provision a vDPA device with a subset of the supported features:
$ vdpa dev add name vdpa0 mgmtdev pci/0000:01:00.5 device_features 0x300020020
$ vdpa dev config show vdpa0
mac 00:e8:ca:11:be:05 link up link_announce false
negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20221125145724.1129962-13-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The adapter is the container of the vdpa_device,
this commits allocate the adapter in dev_add()
rather than in probe(). So that the vdpa_device()
could be re-created when the userspace creates
the vdpa device, and free-ed in dev_del()
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Cc: stable@vger.kernel.org
Message-Id: <20221125145724.1129962-11-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit gets rid of ifcvf_adapter in hw features related
functions in ifcvf_base. Then these functions are more rubust
and de-coupling from the ifcvf_adapter layer. So these
functions could be invoded once the device is probed, even
before the adapter is allocaed.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Cc: stable@vger.kernel.org
Message-Id: <20221125145724.1129962-2-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For each interface, either VLAN tagged or untagged, add two hardware
counters: one for unicast and another for multicast. The counters count
RX packets and bytes and can be read through debugfs:
$ cat /sys/kernel/debug/mlx5/mlx5_core.sf.1/vdpa-0/rx/untagged/mcast/packets
$ cat /sys/kernel/debug/mlx5/mlx5_core.sf.1/vdpa-0/rx/untagged/ucast/bytes
This feature is controlled via the config option
MLX5_VDPA_STEERING_DEBUG. It is off by default as it may have some
impact on performance.
includes a fixup By Yang Yingliang <yangyingliang@huawei.com>:
vdpa/mlx5: fix check wrong pointer in mlx5_vdpa_add_mac_vlan_rules()
The local variable 'rule' is not used anymore, fix return value
check after calling mlx5_add_flow_rules().
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20221114131759.57883-9-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Message-Id: <20230104074418.1737510-1-yangyingliang@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Add debugfs subtree and expose flow table ID and TIR number. This
information can be used by external tools to do extended
troubleshooting.
The information can be retrieved like so:
$ cat /sys/kernel/debug/mlx5/mlx5_core.sf.1/vdpa-0/rx/table_id
$ cat /sys/kernel/debug/mlx5/mlx5_core.sf.1/vdpa-0/rx/tirn
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20221114131759.57883-8-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move some definitions from mlx5_vnet.c to newly added header file
mlx5_vnet.h. We need these definitions for the following patches that
add debugfs tree to expose information vital for debug.
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20221114131759.57883-7-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
zone is a virtio 1.x feature so all fields are LE,
they are handled as such, but have mistakenly been labeled
__virtioXX in the header. This results in a bunch of sparse warnings.
Use the __leXX tags to make sparse happy.
Message-Id: <20221222193214.55146-1-mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio blk returns a 64 bit append_sector in an input buffer,
in LE format. This field is not tagged as LE correctly, so
even though the generated code is ok, we get warnings from sparse:
drivers/block/virtio_blk.c:332:33: sparse: sparse: cast to restricted __le64
Make sparse happy by using the correct type.
Message-Id: <20221220125154.564265-1-mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtblk_result returns blk_status_t which is a bitwise restricted type,
so we are not supposed to stuff it in a plain int temporary variable.
All we do with it is pass it on to a function expecting blk_status_t so
the generated code is ok, but we get warnings from sparse:
drivers/block/virtio_blk.c:326:36: sparse: sparse: incorrect type in initializer (different base types) @@ expected int status @@
+got restricted blk_status_t @@
drivers/block/virtio_blk.c:334:33: sparse: sparse: incorrect type in argument 2 (different base types) @@ expected restricted
+blk_status_t [usertype] error @@ got int status @@
Make sparse happy by using the correct type.
Message-Id: <20221220124152.523531-1-mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
This patch adds support for Zoned Block Devices (ZBDs) to the kernel
virtio-blk driver.
The patch accompanies the virtio-blk ZBD support draft that is now
being proposed for standardization. The latest version of the draft is
linked at
https://github.com/oasis-tcs/virtio-spec/issues/143 .
The QEMU zoned device code that implements these protocol extensions
has been developed by Sam Li and it is currently in review at the QEMU
mailing list.
A number of virtblk request structure changes has been introduced to
accommodate the functionality that is specific to zoned block devices
and, most importantly, make room for carrying the Zoned Append sector
value from the device back to the driver along with the request status.
The zone-specific code in the patch is heavily influenced by NVMe ZNS
code in drivers/nvme/host/zns.c, but it is simpler because the proposed
virtio ZBD draft only covers the zoned device features that are
relevant to the zoned functionality provided by Linux block layer.
includes the following fixup:
virtio-blk: fix probe without CONFIG_BLK_DEV_ZONED
When building without CONFIG_BLK_DEV_ZONED, VIRTIO_BLK_F_ZONED
is excluded from array of driver features.
As a result virtio_has_feature panics in virtio_check_driver_offered_feature
since that by design verifies that a feature we are checking for
is listed in the feature array.
To fix, replace the call to virtio_has_feature with a stub.
Message-Id: <20221016034127.330942-3-dmitry.fomichev@wdc.com>
Co-developed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Message-Id: <20221220112340.518841-1-mst@redhat.com>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reported-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Debugged-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Compute the numa information for a virtio_pmem device from the memory
range of the device. Previously, the target_node was always 0 since
the ndr_desc.target_node field was never explicitly set. The code for
computing the numa node is taken from cxl_pmem_region_probe in
drivers/cxl/pmem.c.
Signed-off-by: Michael Sammler <sammler@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Tested-by: Mina Almasry <almasrymina@google.com>
Message-Id: <20221115214036.1571015-1-sammler@google.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vdpasim_queue_ready calls vringh_init_iotlb, which resets split indexes.
But it can be called after setting a ring base with
vdpasim_set_vq_state.
Fix it by stashing them. They're still resetted in vdpasim_vq_reset.
This was discovered and tested live migrating the vdpa_sim_net device.
Fixes: 2c53d0f64c ("vdpasim: vDPA device simulator")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230118164359.1523760-2-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Both Rich Felker and Yoshinori Sato haven't done any work on arch/sh
for a while. As I have been maintaining Debian's sh4 port since 2014,
I am interested to keep the architecture alive.
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Acked-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull tracing fix from Steven Rostedt:
"Fix showing of TASK_COMM_LEN instead of its value
The TASK_COMM_LEN was converted from a macro into an enum so that BTF
would have access to it. But this unfortunately caused TASK_COMM_LEN
to display in the format fields of trace events, as they are created
by the TRACE_EVENT() macro and such, macros convert to their values,
where as enums do not.
To handle this, instead of using the field itself to be display, save
the value of the array size as another field in the trace_event_fields
structure, and use that instead.
Not only does this fix the issue, but also converts the other trace
events that have this same problem (but were not breaking tooling).
With this change, the original work around b3bc8547d3 ("tracing:
Have TRACE_DEFINE_ENUM affect trace event types as well") could be
reverted (but that should be done in the merge window)"
* tag 'trace-v6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix TASK_COMM_LEN in trace event format file
Pull btrfs fixes from David Sterba:
- one more fix for a tree-log 'write time corruption' report, update
the last dir index directly and don't keep in the log context
- do VFS-level inode lock around FIEMAP to prevent a deadlock with
concurrent fsync, the extent-level lock is not sufficient
- don't cache a single-device filesystem device to avoid cases when a
loop device is reformatted and the entry gets stale
* tag 'for-6.2-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: free device in btrfs_close_devices for a single device filesystem
btrfs: lock the inode in shared mode before starting fiemap
btrfs: simplify update of last_dir_index_offset when logging a directory
Pull USB fixes from Greg KH:
"Here are 2 small USB driver fixes that resolve some reported
regressions and one new device quirk. Specifically these are:
- new quirk for Alcor Link AK9563 smartcard reader
- revert of u_ether gadget change in 6.2-rc1 that caused problems
- typec pin probe fix
All of these have been in linux-next with no reported problems"
* tag 'usb-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: core: add quirk for Alcor Link AK9563 smartcard reader
usb: typec: altmodes/displayport: Fix probe pin assign check
Revert "usb: gadget: u_ether: Do not make UDC parent of the net device"
Pull EFI fix from Ard Biesheuvel:
"A fix from Darren to widen the SMBIOS match for detecting Ampere Altra
machines with problematic firmware. In the mean time, we are working
on a more precise check, but this is still work in progress"
* tag 'efi-fixes-for-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
arm64: efi: Force the use of SetVirtualAddressMap() on eMAG and Altra Max machines
Pull powerpc fixes from Michael Ellerman:
- Fix interrupt exit race with security mitigation switching.
- Don't select ARCH_WANTS_NO_INSTR until warnings are fixed.
- Build fix for CONFIG_NUMA=n.
Thanks to Nicholas Piggin, Randy Dunlap, and Sachin Sant.
* tag 'powerpc-6.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/interrupt: Fix interrupt exit race with security mitigation switch
powerpc/kexec_file: fix implicit decl error
powerpc: Don't select ARCH_WANTS_NO_INSTR
When we upgraded our kernel, we started seeing some page corruption like
the following consistently:
BUG: Bad page state in process ganesha.nfsd pfn:1304ca
page:0000000022261c55 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 pfn:0x1304ca
flags: 0x17ffffc0000000()
raw: 0017ffffc0000000 ffff8a513ffd4c98 ffffeee24b35ec08 0000000000000000
raw: 0000000000000000 0000000000000001 00000000ffffff7f 0000000000000000
page dumped because: nonzero mapcount
CPU: 0 PID: 15567 Comm: ganesha.nfsd Kdump: loaded Tainted: P B O 5.10.158-1.nutanix.20221209.el7.x86_64 #1
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/05/2016
Call Trace:
dump_stack+0x74/0x96
bad_page.cold+0x63/0x94
check_new_page_bad+0x6d/0x80
rmqueue+0x46e/0x970
get_page_from_freelist+0xcb/0x3f0
? _cond_resched+0x19/0x40
__alloc_pages_nodemask+0x164/0x300
alloc_pages_current+0x87/0xf0
skb_page_frag_refill+0x84/0x110
...
Sometimes, it would also show up as corruption in the free list pointer
and cause crashes.
After bisecting the issue, we found the issue started from commit
e320d3012d ("mm/page_alloc.c: fix freeing non-compound pages"):
if (put_page_testzero(page))
free_the_page(page, order);
else if (!PageHead(page))
while (order-- > 0)
free_the_page(page + (1 << order), order);
So the problem is the check PageHead is racy because at this point we
already dropped our reference to the page. So even if we came in with
compound page, the page can already be freed and PageHead can return
false and we will end up freeing all the tail pages causing double free.
Fixes: e320d3012d ("mm/page_alloc.c: fix freeing non-compound pages")
Link: https://lore.kernel.org/lkml/BYAPR02MB448855960A9656EEA81141FC94D99@BYAPR02MB4488.namprd02.prod.outlook.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull spi fixes from Mark Brown:
"A couple of hopefully final fixes for spi: one driver specific fix for
an issue with very large transfers and a fix for an issue with the
locking fixes in spidev merged earlier this release cycle which was
missed"
* tag 'spi-fix-v6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spidev: fix a recursive locking error
spi: dw: Fix wrong FIFO level setting for long xfers
Pull x86 fixes from Ingo Molnar:
"Fix a kprobes bug, plus add a new Intel model number to the upstream
<asm/intel-family.h> header for drivers to use"
* tag 'x86-urgent-2023-02-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add Lunar Lake M
x86/kprobes: Fix 1 byte conditional jump target
Pull locking fix from Ingo Molnar:
"Fix an rtmutex missed-wakeup bug"
* tag 'locking-urgent-2023-02-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rtmutex: Ensure that the top waiter is always woken up
Pull cxl fixes from Dan Williams:
"Two fixups for CXL (Compute Express Link) in presence of passthrough
decoders.
This primarily helps developers using the QEMU CXL emulation, but with
the impending arrival of CXL switches these types of topologies will
be of interest to end users.
- Fix a crash when shutting down regions in the presence of
passthrough decoders
- Fix region creation to understand passthrough decoders instead of
the narrower definition of passthrough ports"
* tag 'cxl-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region: Fix passthrough-decoder detection
cxl/region: Fix null pointer dereference for resetting decoder
Pull libnvdimm fixes from Dan Williams:
"A fix for an issue that could causes users to inadvertantly reserve
too much capacity when debugging the KMSAN and persistent memory
namespace, a lockdep fix, and a kernel-doc build warning:
- Resolve the conflict between KMSAN and NVDIMM with respect to
reserving pmem namespace / volume capacity for larger sizeof(struct
page)
- Fix a lockdep warning in the the NFIT code
- Fix a kernel-doc build warning"
* tag 'libnvdimm-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm: Support sizeof(struct page) > MAX_STRUCT_PAGE_SIZE
ACPI: NFIT: fix a potential deadlock during NFIT teardown
dax: super.c: fix kernel-doc bad line warning
Pull memblock revert from Mike Rapoport:
"Revert 'mm: Always release pages to the buddy allocator in
memblock_free_late()'
The pages being freed by memblock_free_late() have already been
initialized, but if they are in the deferred init range,
__free_one_page() might access nearby uninitialized pages when trying
to coalesce buddies, which will cause a crash.
A proper fix will be more involved so revert this change for the time
being"
* tag 'fixes-2023-02-11' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
Revert "mm: Always release pages to the buddy allocator in memblock_free_late()."
Pull clk fixes from Stephen Boyd:
"Two clk driver fixes
- Use devm_kasprintf() to avoid overflows when forming clk names in
the Microchip PolarFire driver
- Fix the pretty broken Ingenic JZ4760 M/N/OD calculation to actually
work and find proper divisors"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: ingenic: jz4760: Update M/N/OD calculation algorithm
clk: microchip: mpfs-ccc: Use devm_kasprintf() for allocating formatted strings
Pull pin control fixes from Linus Walleij:
"Some assorted pin control fixes, the most interesting will be the
Intel patch fixing a classic problem: laptop touchpad IRQs...
- Some pin drive register fixes in the Mediatek driver.
- Return proper error code in the Aspeed driver, and revert and
ill-advised force-disablement patch that needs to be reworked.
- Fix AMD driver debug output.
- Fix potential NULL dereference in the Single driver.
- Fix a group definition error in the Qualcomm SM8450 LPASS driver.
- Restore pins used in direct IRQ mode in the Intel driver (This
fixes some laptop touchpads!)"
* tag 'pinctrl-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: intel: Restore the pins that used to be in Direct IRQ mode
pinctrl: qcom: sm8450-lpass-lpi: correct swr_rx_data group
pinctrl: aspeed: Revert "Force to disable the function's signal"
pinctrl: single: fix potential NULL dereference
pinctrl: amd: Fix debug output for debounce time
pinctrl: aspeed: Fix confusing types in return value
pinctrl: mediatek: Fix the drive register definition of some Pins
