Several years later I just realized that this code could be greatly
simplified.
First, let's formalize the need for overflow handling in
__arch_xprod64(). Assuming n = UINT64_MAX, there are 2 cases where
an overflow may occur:
1) If a bias must be added, we have m_lo * n_lo + m or
m_lo * 0xffffffff + ((m_hi << 32) + m_lo) or
((m_lo << 32) - m_lo) + ((m_hi << 32) + m_lo) or
(m_lo + m_hi) << 32 which must be < (1 << 64). So the criteria for no
overflow is m_lo + m_hi < (1 << 32).
2) The cross product m_lo * n_hi + m_hi * n_lo or
m_lo * 0xffffffff + m_hi * 0xffffffff or
((m_lo << 32) - m_lo) + ((m_hi << 32) - m_hi). Assuming the top
result from the previous step (m_lo + m_hi) that must be added to
this, we get (m_lo + m_hi) << 32 again.
So let's have a straight and simpler version when this is true.
Otherwise some reordering allows for taking care of possible overflows
without any actual conditionals. And prevent from generating both code
variants by making sure this is considered only if m is perceived as
constant by the compiler.
This, in turn, allows for greatly simplifying __div64_const32(). The
"special case" may go as well as the regular case works just fine
without needing a bias. Then reduction should be applied all the time as
minimizing m is the key.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Be sure to test the extreme cases with and without bias.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
page_to_pfn is usually implemented by pointer arithmetics on the memory
map, which means that bogus input can lead to even more bogus output.
Powerpc had a pfn_valid check on the intermediate pfn in the page_to_phys
implementation when CONFIG_DEBUG_VIRTUAL is defined, which seems
generally useful, so add that to the generic version.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
page_to_phys is duplicated by all architectures, and from some strange
reason placed in <asm/io.h> where it doesn't fit at all.
phys_to_page is only provided by a few architectures despite having a lot
of open coded users.
Provide generic versions in <asm-generic/memory_model.h> to make these
helpers more easily usable.
Note with this patch powerpc loses the CONFIG_DEBUG_VIRTUAL pfn_valid
check. It will be added back in a generic version later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to add HAS_IOPORT as dependency for those
drivers using them unconditionally. Some 8250 serial drivers support
MMIO only use, so fence only the parts requiring I/O ports and print an
error message if a device can't be supported with the current
configuration.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to add HAS_IOPORT as dependency for those
drivers using them. In the bochs driver there is optional MMIO support
detected at runtime, warn if this isn't taken when HAS_IOPORT is not
defined.
There is also a direct and hard coded use in cirrus.c which according to
the comment is only necessary during resume. Let's just skip this as
for example s390 which doesn't have I/O port support also doesen't
support suspend/resume.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> # xe
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to add HAS_IOPORT as dependency for those
drivers using them.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. As hexagon does not support I/O port access it also
the GENERIC_IOMAP mechanism of dynamically choosing between I/O port and
MMIO access doesn't work so don't select it.
Reviewed-by: Brian Cain <bcain@quicinc.com>
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The third parameter to _IOR et al is a type name, not a size. So the
parameter being named "size" is irritating. Rename it to "argtype"
instead to reduce confusion.
There is a very minor chance that this breaks stuff. It only hurts
however if there is a variable (or macro) in userspace that is called
"argtype" *and* it's used in the parameters of _IOR and friends. IMHO
this is negligible because usually definitions making use of these
macros are provided by kernel headers (i.e. us) or if they are
replicated in userspace code, they are replicated and so supposed to
match the kernel definitions (e.g. to make them usable by programs
without the need to update the kernel headers used to compile the
program).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull Kbuild fixes from Masahiro Yamada:
- Move non-boot built-in DTBs to the .rodata section
- Fix Kconfig bugs
- Fix maint scripts in the linux-image Debian package
- Import some list macros to scripts/include/
* tag 'kbuild-fixes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: deb-pkg: Remove blank first line from maint scripts
kbuild: fix a typo dt_binding_schema -> dt_binding_schemas
scripts: import more list macros
kconfig: qconf: fix buffer overflow in debug links
kconfig: qconf: move conf_read() before drawing tree pain
kconfig: clear expr::val_is_valid when allocated
kconfig: fix infinite loop in sym_calc_choice()
kbuild: move non-boot built-in DTBs to .rodata section
Pull x86 platform driver fixes from Hans de Goede:
- Intel PMC fix for suspend/resume issues on some Sky and Kaby Lake
laptops
- Intel Diamond Rapids hw-id additions
- Documentation and MAINTAINERS fixes
- Some other small fixes
* tag 'platform-drivers-x86-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors
platform/x86: wmi: Update WMI driver API documentation
platform/x86: dell-ddv: Fix typo in documentation
platform/x86: dell-sysman: add support for alienware products
platform/x86/intel: power-domains: Add Diamond Rapids support
platform/x86: ISST: Add Diamond Rapids to support list
platform/x86:intel/pmc: Disable ACPI PM Timer disabling on Sky and Kaby Lake
platform/x86: dell-laptop: Do not fail when encountering unsupported batteries
MAINTAINERS: Update Intel In Field Scan(IFS) entry
platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bug
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
x86:
- Fix compilation with KVM_INTEL=KVM_AMD=n
- Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use
Selftests:
- Fix compilation on non-x86 architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/reboot: emergency callbacks are now registered by common KVM code
KVM: x86: leave kvm.ko out of the build if no vendor module is requested
KVM: x86/mmu: fix KVM_X86_QUIRK_SLOT_ZAP_ALL for shadow MMU
KVM: arm64: Fix kvm_has_feat*() handling of negative features
KVM: selftests: Fix build on architectures other than x86_64
KVM: arm64: Another reviewer reshuffle
KVM: arm64: Constrain the host to the maximum shared SVE VL with pKVM
KVM: arm64: Fix __pkvm_init_vcpu cptr_el2 error path
Pull powerpc fix from Michael Ellerman:
- Allow r30 to be used in vDSO code generation of getrandom
Thanks to Jason A. Donenfeld
* tag 'powerpc-6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/vdso: allow r30 in vDSO code generation of getrandom
The blank line causes execve() to fail:
# strace ./postinst
execve("./postinst", ...) = -1 ENOEXEC (Exec format error)
strace: exec: Exec format error
+++ exited with 1 +++
However running the scripts via shell does work (at least with bash)
because the shell attempts to execute the file as a shell script when
execve() fails.
Fixes: b611daae5e ("kbuild: deb-pkg: split image and debug objects staging out into functions")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
If we follow "make help" to "make dt_binding_schema", we will see
below error:
$ make dt_binding_schema
make[1]: *** No rule to make target 'dt_binding_schema'. Stop.
make: *** [Makefile:224: __sub-make] Error 2
It should be a typo. So this will fix it.
Fixes: 604a57ba97 ("dt-bindings: kbuild: Add separate target/dependency for processed-schema.json")
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
If the battery hook encounters a unsupported battery, it will
return an error. This in turn will cause the battery driver to
automatically unregister the battery hook.
On machines with multiple batteries however, this will prevent
the battery hook from handling the primary battery, since it will
always get unregistered upon encountering one of the unsupported
batteries.
Fix this by simply ignoring unsupported batteries.
Reviewed-by: Pali Rohár <pali@kernel.org>
Fixes: ab58016c68 ("platform/x86:dell-laptop: Add knobs to change battery charge settings")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241001212835.341788-4-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
KVM/arm64 fixes for 6.12, take #1
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
Guard them with CONFIG_KVM_X86_COMMON rather than the two vendor modules.
In practice this has no functional change, because CONFIG_KVM_X86_COMMON
is set if and only if at least one vendor-specific module is being built.
However, it is cleaner to specify CONFIG_KVM_X86_COMMON for functions that
are used in kvm.ko.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 590b09b1d8 ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Fixes: 6d55a94222 ("x86/reboot: Unconditionally define cpu_emergency_virt_cb typedef")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm.ko is nothing but library code shared by kvm-intel.ko and kvm-amd.ko.
It provides no functionality on its own and it is unnecessary unless one
of the vendor-specific module is compiled. In particular, /dev/kvm is
not created until one of kvm-intel.ko or kvm-amd.ko is loaded.
Use CONFIG_KVM to decide if it is built-in or a module, but use the
vendor-specific modules for the actual decision on whether to build it.
This also fixes a build failure when CONFIG_KVM_INTEL and CONFIG_KVM_AMD
are both disabled. The cpu_emergency_register_virt_callback() function
is called from kvm.ko, but it is only defined if at least one of
CONFIG_KVM_INTEL and CONFIG_KVM_AMD is provided.
Fixes: 590b09b1d8 ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull bcachefs fixes from Kent Overstreet:
"A lot of little fixes, bigger ones include:
- bcachefs's __wait_on_freeing_inode() was broken in rc1 due to vfs
changes, now fixed along with another lost wakeup
- fragmentation LRU fixes; fsck now repairs successfully (this is the
data structure copygc uses); along with some nice simplification.
- Rework logged op error handling, so that if logged op replay errors
(due to another filesystem error) we delete the logged op instead
of going into an infinite loop)
- Various small filesystem connectivitity repair fixes"
* tag 'bcachefs-2024-10-05' of git://evilpiepirate.org/bcachefs:
bcachefs: Rework logged op error handling
bcachefs: Add warn param to subvol_get_snapshot, peek_inode
bcachefs: Kill snapshot arg to fsck_write_inode()
bcachefs: Check for unlinked, non-empty dirs in check_inode()
bcachefs: Check for unlinked inodes with dirents
bcachefs: Check for directories with no backpointers
bcachefs: Kill alloc_v4.fragmentation_lru
bcachefs: minor lru fsck fixes
bcachefs: Mark more errors AUTOFIX
bcachefs: Make sure we print error that causes fsck to bail out
bcachefs: bkey errors are only AUTOFIX during read
bcachefs: Create lost+found in correct snapshot
bcachefs: Fix reattach_inode()
bcachefs: Add missing wakeup to bch2_inode_hash_remove()
bcachefs: Fix trans_commit disk accounting revert
bcachefs: Fix bch2_inode_is_open() check
bcachefs: Fix return type of dirent_points_to_inode_nowarn()
bcachefs: Fix bad shift in bch2_read_flag_list()
Pull xen fix from Juergen Gross:
"Fix Xen config issue introduced in the merge window"
* tag 'for-linus-6.12a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Fix config option reference in XEN_PRIVCMD definition
Pull ext4 fixes from Ted Ts'o:
"Fix some ext4 bugs and regressions relating to oneline resize and fast
commits"
* tag 'ext4_for_linus-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix off by one issue in alloc_flex_gd()
ext4: mark fc as ineligible using an handle in ext4_xattr_set()
ext4: use handle to mark fc as ineligible in __track_dentry_update()
Pull cxl fix from Ira Weiny:
- Fix calculation for SBDF in error injection
* tag 'cxl-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
EINJ, CXL: Fix CXL device SBDF calculation
Pull i2c fix from Wolfram Sang:
- Fix potential deadlock during runtime suspend and resume (stm32f7)
* tag 'i2c-for-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: stm32f7: Do not prepare/unprepare clock during runtime suspend/resume
Pull spi fixes from Mark Brown:
"A small set of driver specific fixes that came in since the merge
window, about half of which is fixes for correctness in the use of the
runtime PM APIs done as part of a broader cleanup"
* tag 'spi-fix-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: s3c64xx: fix timeout counters in flush_fifo
spi: atmel-quadspi: Fix wrong register value written to MR
spi: spi-cadence: Fix missing spi_controller_is_target() check
spi: spi-cadence: Fix pm_runtime_set_suspended() with runtime pm enabled
spi: spi-imx: Fix pm_runtime_set_suspended() with runtime pm enabled
Pull hardening fixes from Kees Cook:
- gcc plugins: Avoid Kconfig warnings with randstruct (Nathan
Chancellor)
- MAINTAINERS: Add security/Kconfig.hardening to hardening section
(Nathan Chancellor)
- MAINTAINERS: Add unsafe_memcpy() to the FORTIFY review list
* tag 'hardening-v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
MAINTAINERS: Add security/Kconfig.hardening to hardening section
hardening: Adjust dependencies in selection of MODVERSIONS
MAINTAINERS: Add unsafe_memcpy() to the FORTIFY review list
Pull lsm revert from Paul Moore:
"Here is the CONFIG_SECURITY_TOMOYO_LKM revert that we've been
discussing this week. With near unanimous agreement that the original
TOMOYO patches were not the right way to solve the distro problem
Tetsuo is trying the solve, reverting is our best option at this time"
* tag 'lsm-pr-20241004' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
tomoyo: revert CONFIG_SECURITY_TOMOYO_LKM support
Attaching SST PCI device to VM causes "BUG: KASAN: slab-out-of-bounds".
kasan report:
[ 19.411889] ==================================================================
[ 19.413702] BUG: KASAN: slab-out-of-bounds in _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.415634] Read of size 8 at addr ffff888829e65200 by task cpuhp/16/113
[ 19.417368]
[ 19.418627] CPU: 16 PID: 113 Comm: cpuhp/16 Tainted: G E 6.9.0 #10
[ 19.420435] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022
[ 19.422687] Call Trace:
[ 19.424091] <TASK>
[ 19.425448] dump_stack_lvl+0x5d/0x80
[ 19.426963] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.428694] print_report+0x19d/0x52e
[ 19.430206] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 19.431837] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.433539] kasan_report+0xf0/0x170
[ 19.435019] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.436709] _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.438379] ? __pfx_sched_clock_cpu+0x10/0x10
[ 19.439910] isst_if_cpu_online+0x406/0x58f [isst_if_common]
[ 19.441573] ? __pfx_isst_if_cpu_online+0x10/0x10 [isst_if_common]
[ 19.443263] ? ttwu_queue_wakelist+0x2c1/0x360
[ 19.444797] cpuhp_invoke_callback+0x221/0xec0
[ 19.446337] cpuhp_thread_fun+0x21b/0x610
[ 19.447814] ? __pfx_cpuhp_thread_fun+0x10/0x10
[ 19.449354] smpboot_thread_fn+0x2e7/0x6e0
[ 19.450859] ? __pfx_smpboot_thread_fn+0x10/0x10
[ 19.452405] kthread+0x29c/0x350
[ 19.453817] ? __pfx_kthread+0x10/0x10
[ 19.455253] ret_from_fork+0x31/0x70
[ 19.456685] ? __pfx_kthread+0x10/0x10
[ 19.458114] ret_from_fork_asm+0x1a/0x30
[ 19.459573] </TASK>
[ 19.460853]
[ 19.462055] Allocated by task 1198:
[ 19.463410] kasan_save_stack+0x30/0x50
[ 19.464788] kasan_save_track+0x14/0x30
[ 19.466139] __kasan_kmalloc+0xaa/0xb0
[ 19.467465] __kmalloc+0x1cd/0x470
[ 19.468748] isst_if_cdev_register+0x1da/0x350 [isst_if_common]
[ 19.470233] isst_if_mbox_init+0x108/0xff0 [isst_if_mbox_msr]
[ 19.471670] do_one_initcall+0xa4/0x380
[ 19.472903] do_init_module+0x238/0x760
[ 19.474105] load_module+0x5239/0x6f00
[ 19.475285] init_module_from_file+0xd1/0x130
[ 19.476506] idempotent_init_module+0x23b/0x650
[ 19.477725] __x64_sys_finit_module+0xbe/0x130
[ 19.476506] idempotent_init_module+0x23b/0x650
[ 19.477725] __x64_sys_finit_module+0xbe/0x130
[ 19.478920] do_syscall_64+0x82/0x160
[ 19.480036] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 19.481292]
[ 19.482205] The buggy address belongs to the object at ffff888829e65000
which belongs to the cache kmalloc-512 of size 512
[ 19.484818] The buggy address is located 0 bytes to the right of
allocated 512-byte region [ffff888829e65000, ffff888829e65200)
[ 19.487447]
[ 19.488328] The buggy address belongs to the physical page:
[ 19.489569] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888829e60c00 pfn:0x829e60
[ 19.491140] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 19.492466] anon flags: 0x57ffffc0000840(slab|head|node=1|zone=2|lastcpupid=0x1fffff)
[ 19.493914] page_type: 0xffffffff()
[ 19.494988] raw: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001
[ 19.496451] raw: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000
[ 19.497906] head: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001
[ 19.499379] head: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000
[ 19.500844] head: 0057ffffc0000003 ffffea0020a79801 ffffea0020a79848 00000000ffffffff
[ 19.502316] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000
[ 19.503784] page dumped because: kasan: bad access detected
[ 19.505058]
[ 19.505970] Memory state around the buggy address:
[ 19.507172] ffff888829e65100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 19.508599] ffff888829e65180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 19.510013] >ffff888829e65200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 19.510014] ^
[ 19.510016] ffff888829e65280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 19.510018] ffff888829e65300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 19.515367] ==================================================================
The reason for this error is physical_package_ids assigned by VMware VMM
are not continuous and have gaps. This will cause value returned by
topology_physical_package_id() to be more than topology_max_packages().
Here the allocation uses topology_max_packages(). The call to
topology_max_packages() returns maximum logical package ID not physical
ID. Hence use topology_logical_package_id() instead of
topology_physical_package_id().
Fixes: 9a1aac8a96 ("platform/x86: ISST: PUNIT device mapping with Sub-NUMA clustering")
Cc: stable@vger.kernel.org
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Zach Wade <zachwade.k@gmail.com>
Link: https://lore.kernel.org/r/20240923144508.1764-1-zachwade.k@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Pull kselftest fixes from Shuah Khan:
"Fixes to build warnings, install scripts, run-time error path, and git
status cleanups to tests:
- devices/probe: fix for Python3 regex string syntax warnings
- clone3: removing unused macro from clone3_cap_checkpoint_restore()
- vDSO: fix to align getrandom states to cache line
- core and exec: add missing executables to .gitignore files
- rtc: change to skip test if /dev/rtc0 can't be accessed
- timers/posix: fix warn_unused_result result in __fatal_error()
- breakpoints: fix to detect suspend successful condition correctly
- hid: fix to install required dependencies to run the test"
* tag 'linux_kselftest-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: breakpoints: use remaining time to check if suspend succeed
kselftest/devices/probe: Fix SyntaxWarning in regex strings for Python3
selftest: hid: add missing run-hid-tools-tests.sh
selftests: vDSO: align getrandom states to cache line
selftests: exec: update gitignore for load_address
selftests: core: add unshare_test to gitignore
clone3: clone3_cap_checkpoint_restore: remove unused MAX_PID_NS_LEVEL macro
selftests:timers: posix_timers: Fix warn_unused_result in __fatal_error()
selftest: rtc: Check if could access /dev/rtc0 before testing
Initially it was thought that we just wanted to ignore errors from
logged op replay, but it turns out we do need to catch -EROFS, or we'll
go into an infinite loop.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
These shouldn't always be fatal errors - logged op resume, in
particular, and we want it as a parameter there.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It was initially believed that it would be better to be explicit about
the snapshot we're updating when writing inodes in fsck; however, it
turns out that passing around the snapshot separately is more error
prone and we're usually updating the inode in the same snapshow we read
it from.
This is different from normal filesystem paths, where we do the update
in the snapshot of the subvolume we're in.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We want to check for this early so it can be reattached if necessary in
check_unreachable_inodes(); better than letting it be deleted and having
the children reattached, losing their filenames.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
link count works differently in bcachefs - it's only nonzero for files
with multiple hardlinks, which means we can also avoid checking it
except for files that are known to have hardlinks.
That means we need a few different checks instead; in particular, we
don't want fsck to delet a file that has a dirent pointing to it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It's legal for regular files to have missing backpointers (due to
hardlinks), and fsck should automatically add them, but for directories
this is an error that should be flagged.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The fragmentation_lru field hasn't been needed since we reworked the LRU
btrees to use the btree write buffer; previously it was used to resolve
collisions, but the revised LRU btree uses the backpointer (the bucket)
as part of the key.
It should have been deleted at the time of the LRU rework; since it
wasn't, that left places for bugs to hide, in check/repair.
This fixes LRU fsck on a filesystem image helpfully provided by a user
who disappeared before I could get his name for the reported-by.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
check_lru_key() wasn't using write buffer updates for deleting bad lru
entries - dating from before the lru btree used the btree write buffer.
And when possibly flushing the btree write buffer (to make sure we're
seeing a real inconsistency), we need to be using the modern
bch2_btree_write_buffer_maybe_flush().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
