ASoC: Fixes for v7.0
Quite a large pull request, but nothing too concerning here - everything
is fairly small. We've got a couple of smaller core fixes for races on
card teardown from Matteo Cotifava, a fix for handling dodgy DMI
information generated by u-boot, some driver specific fixes and some new
device IDs for Tegra.
The acp_card_rt5682_init() and acp_card_rt5682s_init() functions did not
check the return values of clk_get(). This could lead to a kernel crash
when the invalid pointers are later dereferenced by clock core
functions.
Fix this by:
1. Changing clk_get() to the device-managed devm_clk_get().
2. Adding IS_ERR() checks immediately after each clock acquisition.
Fixes: 8b72562668 ("ASoC: amd: acp: Add support for RT5682-VS codec")
Fixes: d4c750f2c7 ("ASoC: amd: acp: Add generic machine driver support for ACP cards")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20260310044327.2582018-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Some bootloaders like recent versions of U-Boot may install some DMI
properties with empty values rather than not populate them. This manages
to make its way through the validator and cleanup resulting in a rogue
hyphen being appended to the card longname.
Fixes: 4e01e5dbba ("ASoC: improve the DMI long card code in asoc-core")
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://patch.msgid.link/20260306174707.283071-2-casey.connolly@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The acp3x_5682_init() function did not check the return value of
clk_get(), which could lead to dereferencing error pointers in
rt5682_clk_enable().
Fix this by:
1. Changing clk_get() to the device-managed devm_clk_get().
2. Adding proper IS_ERR() checks for both clock acquisitions.
Fixes: 6b8e4e7db3 ("ASoC: amd: Add machine driver for Raven based platform")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20260310024246.2153827-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: New USB device found, idVendor=0666, idProduct=0880
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: USB Audio
usb 1-1: Manufacturer: SPACETOUCH
usb 1-1: SerialNumber: 000000000
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/TYUPR06MB6217ACC80B70BE25D87456B0D247A@TYUPR06MB6217.apcprd06.prod.outlook.com
graph_util_is_ports0() identifies DPCM front-end (ports@0) vs back-end
(ports@1) by calling of_get_child_by_name() to find the first "ports"
child and comparing pointers. This relies on child iteration order
matching DTS source order.
When the DPCM topology comes from a DT overlay, __of_attach_node()
inserts new children at the head of the sibling list, reversing the
order. of_get_child_by_name() then returns ports@1 instead of ports@0,
causing all front-end links to be classified as back-ends. The card
registers with no PCM devices.
Fix this by matching the unit address directly from the node name
instead of relying on sibling order.
Fixes: 9293925245 ("ASoC: simple-card-utils: add asoc_graph_is_ports0()")
Signed-off-by: Sen Wang <sen@ti.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260309042109.2576612-1-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from "Sheetal ." <sheetal@nvidia.com>:
Add Tegra238 sound card support in the Tegra audio graph card driver,
as Tegra238 requires different PLLA and PLLA_OUT0 clock rates compared
to other Tegra platforms.
When a sound card is unbound while a PCM stream is open, a
use-after-free can occur in snd_soc_dapm_stream_event(), called from
the close_delayed_work workqueue handler.
During unbind, snd_soc_unbind_card() flushes delayed work and then
calls soc_cleanup_card_resources(). Inside cleanup,
snd_card_disconnect_sync() releases all PCM file descriptors, and
the resulting PCM close path can call snd_soc_dapm_stream_stop()
which schedules new delayed work with a pmdown_time timer delay.
Since this happens after the flush in snd_soc_unbind_card(), the
new work is not caught. soc_remove_link_components() then frees
DAPM widgets before this work fires, leading to the use-after-free.
The existing flush in soc_free_pcm_runtime() also cannot help as it
runs after soc_remove_link_components() has already freed the widgets.
Add a flush in soc_cleanup_card_resources() after
snd_card_disconnect_sync() (after which no new PCM closes can
schedule further delayed work) and before soc_remove_link_dais()
and soc_remove_link_components() (which tear down the structures the
delayed work accesses).
Fixes: e894efef9a ("ASoC: core: add support to card rebind")
Signed-off-by: Matteo Cotifava <cotifavamatteo@gmail.com>
Link: https://patch.msgid.link/20260309215412.545628-3-cotifavamatteo@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The delayed_work_pending() check before flush_delayed_work() in
soc_free_pcm_runtime() is unnecessary and racy. flush_delayed_work()
is safe to call unconditionally - it is a no-op when no work is
pending. Remove the check.
The original check was added by commit 9c9b652034 ("ASoC: core:
only flush inited work during free") but delayed_work_pending()
followed by flush_delayed_work() has a time-of-check/time-of-use
window where work can become pending between the two calls.
Fixes: 9c9b652034 ("ASoC: core: only flush inited work during free")
Signed-off-by: Matteo Cotifava <cotifavamatteo@gmail.com>
Link: https://patch.msgid.link/20260309215412.545628-2-cotifavamatteo@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Lenovo ThinkPad X390 (ALC257 codec, subsystem ID 0x17aa2288)
does not report headset button press events. Headphone insertion is
detected (SW_HEADPHONE_INSERT), but pressing the inline microphone
button on a headset produces no input events.
Add a SND_PCI_QUIRK entry that maps this subsystem ID to
ALC285_FIXUP_THINKPAD_NO_BASS_SPK_HEADSET_JACK, which enables
headset jack button detection through alc_fixup_headset_jack()
and ThinkPad ACPI integration. This is the same fixup used by
similar ThinkPad models (P1 Gen 3, X1 Extreme Gen 3).
Signed-off-by: Uzair Mughal <contact@uzair.is-a.dev>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260307012906.20093-1-contact@uzair.is-a.dev
In the drain loop, the local variable 'runtime' is reassigned to a
linked stream's runtime (runtime = s->runtime at line 2157). After
releasing the stream lock at line 2169, the code accesses
runtime->no_period_wakeup, runtime->rate, and runtime->buffer_size
(lines 2170-2178) — all referencing the linked stream's runtime without
any lock or refcount protecting its lifetime.
A concurrent close() on the linked stream's fd triggers
snd_pcm_release_substream() → snd_pcm_drop() → pcm_release_private()
→ snd_pcm_unlink() → snd_pcm_detach_substream() → kfree(runtime).
No synchronization prevents kfree(runtime) from completing while the
drain path dereferences the stale pointer.
Fix by caching the needed runtime fields (no_period_wakeup, rate,
buffer_size) into local variables while still holding the stream lock,
and using the cached values after the lock is released.
Fixes: f2b3614cef ("ALSA: PCM - Don't check DMA time-out too shortly")
Cc: stable@vger.kernel.org
Signed-off-by: Mehul Rao <mehulrao@gmail.com>
Link: https://patch.msgid.link/20260305193508.311096-1-mehulrao@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Similarly, USB core holds a reference to all interfaces in the active
configuration so there is no need for a driver to take a reference to a
sibling interface only to release it at disconnect either.
Drop the redundant references to reduce cargo culting, make it easier to
spot drivers where extra references are needed, and reduce the risk of
memory leaks when drivers fail to release them.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260305111810.18688-1-johan@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The driver sets spec->gen.own_eapd_ctl to take manual control of the
EAPD (External Amplifier). However, senary_init does not turn on the
EAPD, while senary_shutdown turns it off.
Since the generic driver skips EAPD handling when own_eapd_ctl is set,
the EAPD remains off after initialization (e.g., after resume), leaving
the codec in a non-functional state.
Explicitly call senary_auto_turn_eapd in senary_init to ensure the EAPD
is enabled and the codec is functional.
Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Link: https://patch.msgid.link/20260303081516.583438-1-wangdich9700@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Mark Brown <broonie@kernel.org>:
I noticed that neither of the put() operations for the controls defined
by the fsl_easrc driver was flagging value changes properly, fix that.
In cs35l56_process_xu_onchip_speaker_id() the warning that the number
of pulls != number of GPIOs should only be printed if pulls are defined.
Pull settings are optional because there would normally be an external
resistor providing the pull. The warning would still be true if pulls
are not defined, but in that case is just log noise.
While we're changing that block of code, also fix the indenting of the
arguments to the dev_warn().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260226113511.1768838-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds some match entries for a few system configurations:
cs42l43 link 0 UID 0
cs35l56 link 1 UID 0
cs35l56 link 1 UID 1
cs35l56 link 1 UID 2
cs35l56 link 1 UID 3
cs42l45 link 1 UID 0
cs35l63 link 0 UID 0
cs35l63 link 0 UID 2
cs35l63 link 0 UID 4
cs35l63 link 0 UID 6
cs42l45 link 0 UID 0
cs35l63 link 1 UID 0
cs35l63 link 1 UID 1
cs42l45 link 0 UID 0
cs35l63 link 1 UID 1
cs35l63 link 1 UID 3
cs42l45 link 1 UID 0
cs35l63 link 0 UID 0
cs35l63 link 0 UID 1
cs42l43 link 1 UID 0
cs35l56 link 1 UID 0
cs35l56 link 1 UID 1
cs35l56 link 1 UID 2
cs35l56 link 1 UID 3
cs35l56 link 1 UID 0
cs35l56 link 1 UID 1
cs35l56 link 1 UID 2
cs35l56 link 1 UID 3
cs35l63 link 0 UID 0
cs35l63 link 0 UID 2
cs35l63 link 0 UID 4
cs35l63 link 0 UID 6
cs42l43 link 0 UID 1
cs42l43b link 0 UID 1
cs42l45 link 0 UID 0
cs42l45 link 1 UID 0
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20260224130307.526626-1-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the ASP register patches to a separate struct and apply this from the
ASP DAI probe() function so that the registers are only patched if the DAI
is part of a DAI link.
Some systems use the ASP as a special-purpose interconnect and on these
systems the ASP registers are configured by a third party (the firmware,
the BIOS, or another device using the amp's secondary host control
interface).
If the machine driver does not hook up the ASP DAI then the ASP registers
must be omitted from the patch to prevent overwriting the third party
configuration.
If the machine driver includes the ASP DAI in a DAI link, this implies that
the machine driver and higher components (such as alsa-ucm) are taking
ownership of the ASP. In this case the ASP registers are patched to known
defaults and the machine driver should configure the ASP.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260226110137.1664562-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA controls should return 1 if the value in the control changed but the
control put operation fsl_easrc_set_reg() only returns 0 or a negative
error code, causing ALSA to not generate any change events. Add a suitable
check by using regmap_update_bits_check() with the underlying regmap, this
is more clearly and simply correct than trying to verify that one of the
generic ops is exactly equivalent to this one.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20260205-asoc-fsl-easrc-fix-events-v1-2-39d4c766918b@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA controls should return 1 if the value in the control changed but the
control put operation fsl_easrc_iec958_put_bits() unconditionally returns
0, causing ALSA to not generate any change events. This is detected by
mixer-test with large numbers of messages in the form:
No event generated for Context 3 IEC958 CS5
Context 3 IEC958 CS5.0 orig 5224 read 5225, is_volatile 0
Add a suitable check.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20260205-asoc-fsl-easrc-fix-events-v1-1-39d4c766918b@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The use of snprintf() may cause a warning with W=1 due to the possibly
truncated string. As the truncation doesn't really matter (and won't
happen practically) in the case of dice driver, just shut it up by
replacing with scnprintf().
Link: https://patch.msgid.link/20260227155705.1557224-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: New USB device found, idVendor=0624, idProduct=3d3f
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: AB13X USB Audio
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 20210726905926
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/TYUPR06MB621795D087BF2D594027C235D273A@TYUPR06MB6217.apcprd06.prod.outlook.com
HP/Speaker auto-detect (VNID_HP_ASEL) has been off by default for every
CA0132 device since the driver was added in 2012. vnode_lswitch is
always initialized to 0 in ca0132_init_chip(), and no quirk or other
code path enables it. As a result, headphone jack detection works only
after the user manually turns on "HP/Speaker Auto Detect" in alsamixer,
which is not obvious on laptops with combo jacks (e.g. Google Link,
Alienware).
Change the default to follow the headphone pin config: if the pin verb
has presence detect enabled (no AC_DEFCFG_MISC_NO_PRESENCE) and the
codec supports it (AC_PINCAP_PRES_DETECT), enable HP_ASEL by default.
This lets firmware (coreboot, UEFI, etc.) express whether the headphone
jack supports insertion detection. Devices with combo jacks can default
to auto-detect; devices with fixed/no jack leave it off.
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Link: https://patch.msgid.link/20260226163055.825167-1-matt.devillier@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At fixing the memory leak of xfer buffer, we forgot to update the
corresponding comment, too. This resulted in a kernel-doc warning
with W=1. Let's correct it.
Fixes: 5c7ef50012 ("ALSA: qc_audio_offload: avoid leaking xfer_buf allocation")
Link: https://patch.msgid.link/20260226154414.1081568-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In cs35l56_hda_posture_put() assign ucontrol->value.integer.value[0] to
a long instead of an unsigned long. ucontrol->value.integer.value[0] is
a long.
This fixes the sparse warning:
sound/hda/codecs/side-codecs/cs35l56_hda.c:256:20: warning: unsigned value
that used to be signed checked against zero?
sound/hda/codecs/side-codecs/cs35l56_hda.c:252:29: signed value source
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Link: https://patch.msgid.link/20260226111728.1700431-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The entry of the validators table for UAC3 AC header descriptor is
defined with the wrong protocol version UAC_VERSION_2, while it should
have been UAC_VERSION_3. This results in the validator never matching
for actual UAC3 devices (protocol == UAC_VERSION_3), causing their
header descriptors to bypass validation entirely. A malicious USB
device presenting a truncated UAC3 header could exploit this to cause
out-of-bounds reads when the driver later accesses unvalidated
descriptor fields.
The bug was introduced in the same commit as the recently fixed UAC3
feature unit sub-type typo, and appears to be from the same copy-paste
error when the UAC3 section was created from the UAC2 section.
Fixes: 57f8770620 ("ALSA: usb-audio: More validations of descriptor units")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jun Seo <jun.seo.93@proton.me>
Link: https://patch.msgid.link/20260226010820.36529-1-jun.seo.93@proton.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The default bdl_pos_adj of 32 for Nvidia HDA controllers is
insufficient on GA102 (and likely other recent Nvidia GPUs) after S3
suspend/resume. The controller's DMA timing degrades after resume,
causing premature IRQ detection in azx_position_ok() which results in
silent HDMI/DP audio output despite userspace reporting a valid
playback state and correct ELD data.
Increase bdl_pos_adj to 64 for AZX_DRIVER_NVIDIA, matching the value
already used by Intel Apollo Lake for the same class of timing issue.
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221069
Suggested-by: Charalampos Mitrodimas <charmitro@posteo.net>
Signed-off-by: Panagiotis Foliadis <pfoliadis@posteo.net>
Link: https://patch.msgid.link/20260225-nvidia-audio-fix-v1-1-b1383c37ec49@posteo.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although DIYINHK USB Audio 2.0 (ID 20b1:2009) shows the implicit
feedback source for the capture stream, this would cause several
problems for the playback. Namely, the device can get wMaxPackSize
1024 for 24/32 bit format with 6 channels, and when a high sample rate
like 352.8kHz or 384kHz is played, the packet size overflows the max
limit. Also, the device has another two playback altsets, and those
aren't properly handled with the implicit feedback.
Since the device has been working well even before introducing the
implicit feedback, we can assume that it works fine in the async mode.
This patch adds the explicit skip of the implicit fb detection to make
the playback running in the async mode.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221076
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260225085233.316306-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
