mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-09-04 20:19:47 +08:00
e1d8f9ccb2
- Fix rtla and latency tooling pkg-config errors
If libtraceevent and libtracefs is installed, but their corresponding '.pc'
files are not installed, it reports that the libraries are missing and
confuses the developer. Instead, report that the pkg-config files are
missing and should be installed.
- Fix overflow bug of the parser in trace_get_user()
trace_get_user() uses the parsing functions to parse the user space strings.
If the parser fails due to incorrect processing, it doesn't terminate the
buffer with a nul byte. Add a "failed" flag to the parser that gets set when
parsing fails and is used to know if the buffer is fine to use or not.
- Remove a semicolon that was at an end of a comment line
- Fix register_ftrace_graph() to unregister the pm notifier on error
The register_ftrace_graph() registers a pm notifier but there's an error
path that can exit the function without unregistering it. Since the function
returns an error, it will never be unregistered.
- Allocate and copy ftrace hash for reader of ftrace filter files
When the set_ftrace_filter or set_ftrace_notrace files are open for read,
an iterator is created and sets its hash pointer to the associated hash that
represents filtering or notrace filtering to it. The issue is that the hash
it points to can change while the iteration is happening. All the locking
used to access the tracer's hashes are released which means those hashes can
change or even be freed. Using the hash pointed to by the iterator can cause
UAF bugs or similar.
Have the read of these files allocate and copy the corresponding hashes and
use that as that will keep them the same while the iterator is open. This
also simplifies the code as opening it for write already does an allocate
and copy, and now that the read is doing the same, there's no need to check
which way it was opened on the release of the file, and the iterator hash
can always be freed.
- Fix function graph to copy args into temp storage
The output of the function graph tracer shows both the entry and the exit of
a function. When the exit is right after the entry, it combines the two
events into one with the output of "function();", instead of showing:
function() {
}
In order to do this, the iterator descriptor that reads the events includes
storage that saves the entry event while it peaks at the next event in
the ring buffer. The peek can free the entry event so the iterator must
store the information to use it after the peek.
With the addition of function graph tracer recording the args, where the
args are a dynamic array in the entry event, the temp storage does not save
them. This causes the args to be corrupted or even cause a read of unsafe
memory.
Add space to save the args in the temp storage of the iterator.
- Fix race between ftrace_dump and reading trace_pipe
ftrace_dump() is used when a crash occurs where the ftrace buffer will be
printed to the console. But it can also be triggered by sysrq-z. If a
sysrq-z is triggered while a task is reading trace_pipe it can cause a race
in the ftrace_dump() where it checks if the buffer has content, then it
checks if the next event is available, and then prints the output
(regardless if the next event was available or not). Reading trace_pipe
at the same time can cause it to not be available, and this triggers a
WARN_ON in the print. Move the printing into the check if the next event
exists or not.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaKnAGRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qotPAQD02idezasiFi0vakLTR+0x/uAI2UOL
5RLfTwmZW7S1FwEAwOvGpKx3k/kUwDp5EReP34A+1Fqyc5Mvps4UCE1s4gM=
=ENHu
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix rtla and latency tooling pkg-config errors
If libtraceevent and libtracefs is installed, but their corresponding
'.pc' files are not installed, it reports that the libraries are
missing and confuses the developer. Instead, report that the
pkg-config files are missing and should be installed.
- Fix overflow bug of the parser in trace_get_user()
trace_get_user() uses the parsing functions to parse the user space
strings. If the parser fails due to incorrect processing, it doesn't
terminate the buffer with a nul byte. Add a "failed" flag to the
parser that gets set when parsing fails and is used to know if the
buffer is fine to use or not.
- Remove a semicolon that was at an end of a comment line
- Fix register_ftrace_graph() to unregister the pm notifier on error
The register_ftrace_graph() registers a pm notifier but there's an
error path that can exit the function without unregistering it. Since
the function returns an error, it will never be unregistered.
- Allocate and copy ftrace hash for reader of ftrace filter files
When the set_ftrace_filter or set_ftrace_notrace files are open for
read, an iterator is created and sets its hash pointer to the
associated hash that represents filtering or notrace filtering to it.
The issue is that the hash it points to can change while the
iteration is happening. All the locking used to access the tracer's
hashes are released which means those hashes can change or even be
freed. Using the hash pointed to by the iterator can cause UAF bugs
or similar.
Have the read of these files allocate and copy the corresponding
hashes and use that as that will keep them the same while the
iterator is open. This also simplifies the code as opening it for
write already does an allocate and copy, and now that the read is
doing the same, there's no need to check which way it was opened on
the release of the file, and the iterator hash can always be freed.
- Fix function graph to copy args into temp storage
The output of the function graph tracer shows both the entry and the
exit of a function. When the exit is right after the entry, it
combines the two events into one with the output of "function();",
instead of showing:
function() {
}
In order to do this, the iterator descriptor that reads the events
includes storage that saves the entry event while it peaks at the
next event in the ring buffer. The peek can free the entry event so
the iterator must store the information to use it after the peek.
With the addition of function graph tracer recording the args, where
the args are a dynamic array in the entry event, the temp storage
does not save them. This causes the args to be corrupted or even
cause a read of unsafe memory.
Add space to save the args in the temp storage of the iterator.
- Fix race between ftrace_dump and reading trace_pipe
ftrace_dump() is used when a crash occurs where the ftrace buffer
will be printed to the console. But it can also be triggered by
sysrq-z. If a sysrq-z is triggered while a task is reading trace_pipe
it can cause a race in the ftrace_dump() where it checks if the
buffer has content, then it checks if the next event is available,
and then prints the output (regardless if the next event was
available or not). Reading trace_pipe at the same time can cause it
to not be available, and this triggers a WARN_ON in the print. Move
the printing into the check if the next event exists or not
* tag 'trace-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Also allocate and copy hash for reading of filter files
ftrace: Fix potential warning in trace_printk_seq during ftrace_dump
fgraph: Copy args in intermediate storage with entry
trace/fgraph: Fix the warning caused by missing unregister notifier
ring-buffer: Remove redundant semicolons
tracing: Limit access to parser->buffer when trace_get_user failed
rtla: Check pkg-config install
tools/latency-collector: Check pkg-config install
|
||
|---|---|---|
| .. | ||
| accounting | ||
| arch | ||
| bootconfig | ||
| bpf | ||
| build | ||
| certs | ||
| cgroup | ||
| counter | ||
| crypto | ||
| debugging | ||
| firewire | ||
| firmware | ||
| gpio | ||
| hv | ||
| iio | ||
| include | ||
| kvm/kvm_stat | ||
| laptop | ||
| leds | ||
| lib | ||
| memory-model | ||
| mm | ||
| net | ||
| objtool | ||
| pcmcia | ||
| perf | ||
| power | ||
| rcu | ||
| sched | ||
| sched_ext | ||
| scripts | ||
| sound | ||
| spi | ||
| testing | ||
| thermal | ||
| time | ||
| tracing | ||
| usb | ||
| verification | ||
| virtio | ||
| wmi | ||
| workqueue | ||
| writeback | ||
| Makefile | ||