mirror of
				git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
				synced 2025-09-04 20:19:47 +08:00 
			
		
		
		
	 f0843b681a
			
		
	
	
		f0843b681a
		
	
	
	
	
		
			
			Remove references to IXGBE_ETH_P_LLD and use ETH_P_LLDP instead. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
		
			
				
	
	
		
			1720 lines
		
	
	
		
			45 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1720 lines
		
	
	
		
			45 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0
 | |
| /* Copyright(c) 1999 - 2018 Intel Corporation. */
 | |
| 
 | |
| #include <linux/types.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/pci.h>
 | |
| #include <linux/netdevice.h>
 | |
| #include <linux/vmalloc.h>
 | |
| #include <linux/string.h>
 | |
| #include <linux/in.h>
 | |
| #include <linux/ip.h>
 | |
| #include <linux/tcp.h>
 | |
| #include <linux/ipv6.h>
 | |
| #include <linux/if_bridge.h>
 | |
| #ifdef NETIF_F_HW_VLAN_CTAG_TX
 | |
| #include <linux/if_vlan.h>
 | |
| #endif
 | |
| 
 | |
| #include "ixgbe.h"
 | |
| #include "ixgbe_type.h"
 | |
| #include "ixgbe_sriov.h"
 | |
| 
 | |
| #ifdef CONFIG_PCI_IOV
 | |
| static inline void ixgbe_alloc_vf_macvlans(struct ixgbe_adapter *adapter,
 | |
| 					   unsigned int num_vfs)
 | |
| {
 | |
| 	struct ixgbe_hw *hw = &adapter->hw;
 | |
| 	struct vf_macvlans *mv_list;
 | |
| 	int num_vf_macvlans, i;
 | |
| 
 | |
| 	num_vf_macvlans = hw->mac.num_rar_entries -
 | |
| 			  (IXGBE_MAX_PF_MACVLANS + 1 + num_vfs);
 | |
| 	if (!num_vf_macvlans)
 | |
| 		return;
 | |
| 
 | |
| 	mv_list = kcalloc(num_vf_macvlans, sizeof(struct vf_macvlans),
 | |
| 			  GFP_KERNEL);
 | |
| 	if (mv_list) {
 | |
| 		/* Initialize list of VF macvlans */
 | |
| 		INIT_LIST_HEAD(&adapter->vf_mvs.l);
 | |
| 		for (i = 0; i < num_vf_macvlans; i++) {
 | |
| 			mv_list[i].vf = -1;
 | |
| 			mv_list[i].free = true;
 | |
| 			list_add(&mv_list[i].l, &adapter->vf_mvs.l);
 | |
| 		}
 | |
| 		adapter->mv_list = mv_list;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int __ixgbe_enable_sriov(struct ixgbe_adapter *adapter,
 | |
| 				unsigned int num_vfs)
 | |
| {
 | |
| 	struct ixgbe_hw *hw = &adapter->hw;
 | |
| 	int i;
 | |
| 
 | |
| 	if (adapter->xdp_prog) {
 | |
| 		e_warn(probe, "SRIOV is not supported with XDP\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	/* Enable VMDq flag so device will be set in VM mode */
 | |
| 	adapter->flags |= IXGBE_FLAG_SRIOV_ENABLED |
 | |
| 			  IXGBE_FLAG_VMDQ_ENABLED;
 | |
| 
 | |
| 	/* Allocate memory for per VF control structures */
 | |
| 	adapter->vfinfo = kcalloc(num_vfs, sizeof(struct vf_data_storage),
 | |
| 				  GFP_KERNEL);
 | |
| 	if (!adapter->vfinfo)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	adapter->num_vfs = num_vfs;
 | |
| 
 | |
| 	ixgbe_alloc_vf_macvlans(adapter, num_vfs);
 | |
| 	adapter->ring_feature[RING_F_VMDQ].offset = num_vfs;
 | |
| 
 | |
| 	/* Initialize default switching mode VEB */
 | |
| 	IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN);
 | |
| 	adapter->bridge_mode = BRIDGE_MODE_VEB;
 | |
| 
 | |
| 	/* limit trafffic classes based on VFs enabled */
 | |
| 	if ((adapter->hw.mac.type == ixgbe_mac_82599EB) && (num_vfs < 16)) {
 | |
| 		adapter->dcb_cfg.num_tcs.pg_tcs = MAX_TRAFFIC_CLASS;
 | |
| 		adapter->dcb_cfg.num_tcs.pfc_tcs = MAX_TRAFFIC_CLASS;
 | |
| 	} else if (num_vfs < 32) {
 | |
| 		adapter->dcb_cfg.num_tcs.pg_tcs = 4;
 | |
| 		adapter->dcb_cfg.num_tcs.pfc_tcs = 4;
 | |
| 	} else {
 | |
| 		adapter->dcb_cfg.num_tcs.pg_tcs = 1;
 | |
| 		adapter->dcb_cfg.num_tcs.pfc_tcs = 1;
 | |
| 	}
 | |
| 
 | |
| 	/* Disable RSC when in SR-IOV mode */
 | |
| 	adapter->flags2 &= ~(IXGBE_FLAG2_RSC_CAPABLE |
 | |
| 			     IXGBE_FLAG2_RSC_ENABLED);
 | |
| 
 | |
| 	for (i = 0; i < num_vfs; i++) {
 | |
| 		/* enable spoof checking for all VFs */
 | |
| 		adapter->vfinfo[i].spoofchk_enabled = true;
 | |
| 
 | |
| 		/* We support VF RSS querying only for 82599 and x540
 | |
| 		 * devices at the moment. These devices share RSS
 | |
| 		 * indirection table and RSS hash key with PF therefore
 | |
| 		 * we want to disable the querying by default.
 | |
| 		 */
 | |
| 		adapter->vfinfo[i].rss_query_enabled = 0;
 | |
| 
 | |
| 		/* Untrust all VFs */
 | |
| 		adapter->vfinfo[i].trusted = false;
 | |
| 
 | |
| 		/* set the default xcast mode */
 | |
| 		adapter->vfinfo[i].xcast_mode = IXGBEVF_XCAST_MODE_NONE;
 | |
| 	}
 | |
| 
 | |
| 	e_info(probe, "SR-IOV enabled with %d VFs\n", num_vfs);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * ixgbe_get_vfs - Find and take references to all vf devices
 | |
|  * @adapter: Pointer to adapter struct
 | |
|  */
 | |
| static void ixgbe_get_vfs(struct ixgbe_adapter *adapter)
 | |
| {
 | |
| 	struct pci_dev *pdev = adapter->pdev;
 | |
| 	u16 vendor = pdev->vendor;
 | |
| 	struct pci_dev *vfdev;
 | |
| 	int vf = 0;
 | |
| 	u16 vf_id;
 | |
| 	int pos;
 | |
| 
 | |
| 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV);
 | |
| 	if (!pos)
 | |
| 		return;
 | |
| 	pci_read_config_word(pdev, pos + PCI_SRIOV_VF_DID, &vf_id);
 | |
| 
 | |
| 	vfdev = pci_get_device(vendor, vf_id, NULL);
 | |
| 	for (; vfdev; vfdev = pci_get_device(vendor, vf_id, vfdev)) {
 | |
| 		if (!vfdev->is_virtfn)
 | |
| 			continue;
 | |
| 		if (vfdev->physfn != pdev)
 | |
| 			continue;
 | |
| 		if (vf >= adapter->num_vfs)
 | |
| 			continue;
 | |
| 		pci_dev_get(vfdev);
 | |
| 		adapter->vfinfo[vf].vfdev = vfdev;
 | |
| 		++vf;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /* Note this function is called when the user wants to enable SR-IOV
 | |
|  * VFs using the now deprecated module parameter
 | |
|  */
 | |
| void ixgbe_enable_sriov(struct ixgbe_adapter *adapter, unsigned int max_vfs)
 | |
| {
 | |
| 	int pre_existing_vfs = 0;
 | |
| 	unsigned int num_vfs;
 | |
| 
 | |
| 	pre_existing_vfs = pci_num_vf(adapter->pdev);
 | |
| 	if (!pre_existing_vfs && !max_vfs)
 | |
| 		return;
 | |
| 
 | |
| 	/* If there are pre-existing VFs then we have to force
 | |
| 	 * use of that many - over ride any module parameter value.
 | |
| 	 * This may result from the user unloading the PF driver
 | |
| 	 * while VFs were assigned to guest VMs or because the VFs
 | |
| 	 * have been created via the new PCI SR-IOV sysfs interface.
 | |
| 	 */
 | |
| 	if (pre_existing_vfs) {
 | |
| 		num_vfs = pre_existing_vfs;
 | |
| 		dev_warn(&adapter->pdev->dev,
 | |
| 			 "Virtual Functions already enabled for this device - Please reload all VF drivers to avoid spoofed packet errors\n");
 | |
| 	} else {
 | |
| 		int err;
 | |
| 		/*
 | |
| 		 * The 82599 supports up to 64 VFs per physical function
 | |
| 		 * but this implementation limits allocation to 63 so that
 | |
| 		 * basic networking resources are still available to the
 | |
| 		 * physical function.  If the user requests greater than
 | |
| 		 * 63 VFs then it is an error - reset to default of zero.
 | |
| 		 */
 | |
| 		num_vfs = min_t(unsigned int, max_vfs, IXGBE_MAX_VFS_DRV_LIMIT);
 | |
| 
 | |
| 		err = pci_enable_sriov(adapter->pdev, num_vfs);
 | |
| 		if (err) {
 | |
| 			e_err(probe, "Failed to enable PCI sriov: %d\n", err);
 | |
| 			return;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (!__ixgbe_enable_sriov(adapter, num_vfs)) {
 | |
| 		ixgbe_get_vfs(adapter);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/* If we have gotten to this point then there is no memory available
 | |
| 	 * to manage the VF devices - print message and bail.
 | |
| 	 */
 | |
| 	e_err(probe, "Unable to allocate memory for VF Data Storage - "
 | |
| 	      "SRIOV disabled\n");
 | |
| 	ixgbe_disable_sriov(adapter);
 | |
| }
 | |
| 
 | |
| #endif /* #ifdef CONFIG_PCI_IOV */
 | |
| int ixgbe_disable_sriov(struct ixgbe_adapter *adapter)
 | |
| {
 | |
| 	unsigned int num_vfs = adapter->num_vfs, vf;
 | |
| 	int rss;
 | |
| 
 | |
| 	/* set num VFs to 0 to prevent access to vfinfo */
 | |
| 	adapter->num_vfs = 0;
 | |
| 
 | |
| 	/* put the reference to all of the vf devices */
 | |
| 	for (vf = 0; vf < num_vfs; ++vf) {
 | |
| 		struct pci_dev *vfdev = adapter->vfinfo[vf].vfdev;
 | |
| 
 | |
| 		if (!vfdev)
 | |
| 			continue;
 | |
| 		adapter->vfinfo[vf].vfdev = NULL;
 | |
| 		pci_dev_put(vfdev);
 | |
| 	}
 | |
| 
 | |
| 	/* free VF control structures */
 | |
| 	kfree(adapter->vfinfo);
 | |
| 	adapter->vfinfo = NULL;
 | |
| 
 | |
| 	/* free macvlan list */
 | |
| 	kfree(adapter->mv_list);
 | |
| 	adapter->mv_list = NULL;
 | |
| 
 | |
| 	/* if SR-IOV is already disabled then there is nothing to do */
 | |
| 	if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED))
 | |
| 		return 0;
 | |
| 
 | |
| #ifdef CONFIG_PCI_IOV
 | |
| 	/*
 | |
| 	 * If our VFs are assigned we cannot shut down SR-IOV
 | |
| 	 * without causing issues, so just leave the hardware
 | |
| 	 * available but disabled
 | |
| 	 */
 | |
| 	if (pci_vfs_assigned(adapter->pdev)) {
 | |
| 		e_dev_warn("Unloading driver while VFs are assigned - VFs will not be deallocated\n");
 | |
| 		return -EPERM;
 | |
| 	}
 | |
| 	/* disable iov and allow time for transactions to clear */
 | |
| 	pci_disable_sriov(adapter->pdev);
 | |
| #endif
 | |
| 
 | |
| 	/* Disable VMDq flag so device will be set in VM mode */
 | |
| 	if (bitmap_weight(adapter->fwd_bitmask, adapter->num_rx_pools) == 1) {
 | |
| 		adapter->flags &= ~IXGBE_FLAG_VMDQ_ENABLED;
 | |
| 		adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED;
 | |
| 		rss = min_t(int, ixgbe_max_rss_indices(adapter),
 | |
| 			    num_online_cpus());
 | |
| 	} else {
 | |
| 		rss = min_t(int, IXGBE_MAX_L2A_QUEUES, num_online_cpus());
 | |
| 	}
 | |
| 
 | |
| 	adapter->ring_feature[RING_F_VMDQ].offset = 0;
 | |
| 	adapter->ring_feature[RING_F_RSS].limit = rss;
 | |
| 
 | |
| 	/* take a breather then clean up driver data */
 | |
| 	msleep(100);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int ixgbe_pci_sriov_enable(struct pci_dev *dev, int num_vfs)
 | |
| {
 | |
| #ifdef CONFIG_PCI_IOV
 | |
| 	struct ixgbe_adapter *adapter = pci_get_drvdata(dev);
 | |
| 	int pre_existing_vfs = pci_num_vf(dev);
 | |
| 	int err = 0, num_rx_pools, i, limit;
 | |
| 	u8 num_tc;
 | |
| 
 | |
| 	if (pre_existing_vfs && pre_existing_vfs != num_vfs)
 | |
| 		err = ixgbe_disable_sriov(adapter);
 | |
| 	else if (pre_existing_vfs && pre_existing_vfs == num_vfs)
 | |
| 		return num_vfs;
 | |
| 
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 
 | |
| 	/* While the SR-IOV capability structure reports total VFs to be 64,
 | |
| 	 * we limit the actual number allocated as below based on two factors.
 | |
| 	 *    Num_TCs	MAX_VFs
 | |
| 	 *	1	  63
 | |
| 	 *	<=4	  31
 | |
| 	 *	>4	  15
 | |
| 	 * First, we reserve some transmit/receive resources for the PF.
 | |
| 	 * Second, VMDQ also uses the same pools that SR-IOV does. We need to
 | |
| 	 * account for this, so that we don't accidentally allocate more VFs
 | |
| 	 * than we have available pools. The PCI bus driver already checks for
 | |
| 	 * other values out of range.
 | |
| 	 */
 | |
| 	num_tc = adapter->hw_tcs;
 | |
| 	num_rx_pools = bitmap_weight(adapter->fwd_bitmask,
 | |
| 				     adapter->num_rx_pools);
 | |
| 	limit = (num_tc > 4) ? IXGBE_MAX_VFS_8TC :
 | |
| 		(num_tc > 1) ? IXGBE_MAX_VFS_4TC : IXGBE_MAX_VFS_1TC;
 | |
| 
 | |
| 	if (num_vfs > (limit - num_rx_pools)) {
 | |
| 		e_dev_err("Currently configured with %d TCs, and %d offloaded macvlans. Creating more than %d VFs is not allowed\n",
 | |
| 			  num_tc, num_rx_pools - 1, limit - num_rx_pools);
 | |
| 		return -EPERM;
 | |
| 	}
 | |
| 
 | |
| 	err = __ixgbe_enable_sriov(adapter, num_vfs);
 | |
| 	if (err)
 | |
| 		return  err;
 | |
| 
 | |
| 	for (i = 0; i < num_vfs; i++)
 | |
| 		ixgbe_vf_configuration(dev, (i | 0x10000000));
 | |
| 
 | |
| 	/* reset before enabling SRIOV to avoid mailbox issues */
 | |
| 	ixgbe_sriov_reinit(adapter);
 | |
| 
 | |
| 	err = pci_enable_sriov(dev, num_vfs);
 | |
| 	if (err) {
 | |
| 		e_dev_warn("Failed to enable PCI sriov: %d\n", err);
 | |
| 		return err;
 | |
| 	}
 | |
| 	ixgbe_get_vfs(adapter);
 | |
| 
 | |
| 	return num_vfs;
 | |
| #else
 | |
| 	return 0;
 | |
| #endif
 | |
| }
 | |
| 
 | |
| static int ixgbe_pci_sriov_disable(struct pci_dev *dev)
 | |
| {
 | |
| 	struct ixgbe_adapter *adapter = pci_get_drvdata(dev);
 | |
| 	int err;
 | |
| #ifdef CONFIG_PCI_IOV
 | |
| 	u32 current_flags = adapter->flags;
 | |
| 	int prev_num_vf = pci_num_vf(dev);
 | |
| #endif
 | |
| 
 | |
| 	err = ixgbe_disable_sriov(adapter);
 | |
| 
 | |
| 	/* Only reinit if no error and state changed */
 | |
| #ifdef CONFIG_PCI_IOV
 | |
| 	if (!err && (current_flags != adapter->flags ||
 | |
| 		     prev_num_vf != pci_num_vf(dev)))
 | |
| 		ixgbe_sriov_reinit(adapter);
 | |
| #endif
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| int ixgbe_pci_sriov_configure(struct pci_dev *dev, int num_vfs)
 | |
| {
 | |
| 	if (num_vfs == 0)
 | |
| 		return ixgbe_pci_sriov_disable(dev);
 | |
| 	else
 | |
| 		return ixgbe_pci_sriov_enable(dev, num_vfs);
 | |
| }
 | |
| 
 | |
| static int ixgbe_set_vf_multicasts(struct ixgbe_adapter *adapter,
 | |
| 				   u32 *msgbuf, u32 vf)
 | |
| {
 | |
| 	int entries = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK)
 | |
| 		       >> IXGBE_VT_MSGINFO_SHIFT;
 | |
| 	u16 *hash_list = (u16 *)&msgbuf[1];
 | |
| 	struct vf_data_storage *vfinfo = &adapter->vfinfo[vf];
 | |
| 	struct ixgbe_hw *hw = &adapter->hw;
 | |
| 	int i;
 | |
| 	u32 vector_bit;
 | |
| 	u32 vector_reg;
 | |
| 	u32 mta_reg;
 | |
| 	u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf));
 | |
| 
 | |
| 	/* only so many hash values supported */
 | |
| 	entries = min(entries, IXGBE_MAX_VF_MC_ENTRIES);
 | |
| 
 | |
| 	/*
 | |
| 	 * salt away the number of multi cast addresses assigned
 | |
| 	 * to this VF for later use to restore when the PF multi cast
 | |
| 	 * list changes
 | |
| 	 */
 | |
| 	vfinfo->num_vf_mc_hashes = entries;
 | |
| 
 | |
| 	/*
 | |
| 	 * VFs are limited to using the MTA hash table for their multicast
 | |
| 	 * addresses
 | |
| 	 */
 | |
| 	for (i = 0; i < entries; i++) {
 | |
| 		vfinfo->vf_mc_hashes[i] = hash_list[i];
 | |
| 	}
 | |
| 
 | |
| 	for (i = 0; i < vfinfo->num_vf_mc_hashes; i++) {
 | |
| 		vector_reg = (vfinfo->vf_mc_hashes[i] >> 5) & 0x7F;
 | |
| 		vector_bit = vfinfo->vf_mc_hashes[i] & 0x1F;
 | |
| 		mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg));
 | |
| 		mta_reg |= BIT(vector_bit);
 | |
| 		IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg);
 | |
| 	}
 | |
| 	vmolr |= IXGBE_VMOLR_ROMPE;
 | |
| 	IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_PCI_IOV
 | |
| void ixgbe_restore_vf_multicasts(struct ixgbe_adapter *adapter)
 | |
| {
 | |
| 	struct ixgbe_hw *hw = &adapter->hw;
 | |
| 	struct vf_data_storage *vfinfo;
 | |
| 	int i, j;
 | |
| 	u32 vector_bit;
 | |
| 	u32 vector_reg;
 | |
| 	u32 mta_reg;
 | |
| 
 | |
| 	for (i = 0; i < adapter->num_vfs; i++) {
 | |
| 		u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(i));
 | |
| 		vfinfo = &adapter->vfinfo[i];
 | |
| 		for (j = 0; j < vfinfo->num_vf_mc_hashes; j++) {
 | |
| 			hw->addr_ctrl.mta_in_use++;
 | |
| 			vector_reg = (vfinfo->vf_mc_hashes[j] >> 5) & 0x7F;
 | |
| 			vector_bit = vfinfo->vf_mc_hashes[j] & 0x1F;
 | |
| 			mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg));
 | |
| 			mta_reg |= BIT(vector_bit);
 | |
| 			IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg);
 | |
| 		}
 | |
| 
 | |
| 		if (vfinfo->num_vf_mc_hashes)
 | |
| 			vmolr |= IXGBE_VMOLR_ROMPE;
 | |
| 		else
 | |
| 			vmolr &= ~IXGBE_VMOLR_ROMPE;
 | |
| 		IXGBE_WRITE_REG(hw, IXGBE_VMOLR(i), vmolr);
 | |
| 	}
 | |
| 
 | |
| 	/* Restore any VF macvlans */
 | |
| 	ixgbe_full_sync_mac_table(adapter);
 | |
| }
 | |
| #endif
 | |
| 
 | |
| static int ixgbe_set_vf_vlan(struct ixgbe_adapter *adapter, int add, int vid,
 | |
| 			     u32 vf)
 | |
| {
 | |
| 	struct ixgbe_hw *hw = &adapter->hw;
 | |
| 	int err;
 | |
| 
 | |
| 	/* If VLAN overlaps with one the PF is currently monitoring make
 | |
| 	 * sure that we are able to allocate a VLVF entry.  This may be
 | |
| 	 * redundant but it guarantees PF will maintain visibility to
 | |
| 	 * the VLAN.
 | |
| 	 */
 | |
| 	if (add && test_bit(vid, adapter->active_vlans)) {
 | |
| 		err = hw->mac.ops.set_vfta(hw, vid, VMDQ_P(0), true, false);
 | |
| 		if (err)
 | |
| 			return err;
 | |
| 	}
 | |
| 
 | |
| 	err = hw->mac.ops.set_vfta(hw, vid, vf, !!add, false);
 | |
| 
 | |
| 	if (add && !err)
 | |
| 		return err;
 | |
| 
 | |
| 	/* If we failed to add the VF VLAN or we are removing the VF VLAN
 | |
| 	 * we may need to drop the PF pool bit in order to allow us to free
 | |
| 	 * up the VLVF resources.
 | |
| 	 */
 | |
| 	if (test_bit(vid, adapter->active_vlans) ||
 | |
| 	    (adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC))
 | |
| 		ixgbe_update_pf_promisc_vlvf(adapter, vid);
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static s32 ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf)
 | |
| {
 | |
| 	struct ixgbe_hw *hw = &adapter->hw;
 | |
| 	int max_frame = msgbuf[1];
 | |
| 	u32 max_frs;
 | |
| 
 | |
| 	/*
 | |
| 	 * For 82599EB we have to keep all PFs and VFs operating with
 | |
| 	 * the same max_frame value in order to avoid sending an oversize
 | |
| 	 * frame to a VF.  In order to guarantee this is handled correctly
 | |
| 	 * for all cases we have several special exceptions to take into
 | |
| 	 * account before we can enable the VF for receive
 | |
| 	 */
 | |
| 	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
 | |
| 		struct net_device *dev = adapter->netdev;
 | |
| 		int pf_max_frame = dev->mtu + ETH_HLEN;
 | |
| 		u32 reg_offset, vf_shift, vfre;
 | |
| 		s32 err = 0;
 | |
| 
 | |
| #ifdef CONFIG_FCOE
 | |
| 		if (dev->features & NETIF_F_FCOE_MTU)
 | |
| 			pf_max_frame = max_t(int, pf_max_frame,
 | |
| 					     IXGBE_FCOE_JUMBO_FRAME_SIZE);
 | |
| 
 | |
| #endif /* CONFIG_FCOE */
 | |
| 		switch (adapter->vfinfo[vf].vf_api) {
 | |
| 		case ixgbe_mbox_api_11:
 | |
| 		case ixgbe_mbox_api_12:
 | |
| 		case ixgbe_mbox_api_13:
 | |
| 		case ixgbe_mbox_api_14:
 | |
| 			/* Version 1.1 supports jumbo frames on VFs if PF has
 | |
| 			 * jumbo frames enabled which means legacy VFs are
 | |
| 			 * disabled
 | |
| 			 */
 | |
| 			if (pf_max_frame > ETH_FRAME_LEN)
 | |
| 				break;
 | |
| 			/* fall through */
 | |
| 		default:
 | |
| 			/* If the PF or VF are running w/ jumbo frames enabled
 | |
| 			 * we need to shut down the VF Rx path as we cannot
 | |
| 			 * support jumbo frames on legacy VFs
 | |
| 			 */
 | |
| 			if ((pf_max_frame > ETH_FRAME_LEN) ||
 | |
| 			    (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)))
 | |
| 				err = -EINVAL;
 | |
| 			break;
 | |
| 		}
 | |
| 
 | |
| 		/* determine VF receive enable location */
 | |
| 		vf_shift = vf % 32;
 | |
| 		reg_offset = vf / 32;
 | |
| 
 | |
| 		/* enable or disable receive depending on error */
 | |
| 		vfre = IXGBE_READ_REG(hw, IXGBE_VFRE(reg_offset));
 | |
| 		if (err)
 | |
| 			vfre &= ~BIT(vf_shift);
 | |
| 		else
 | |
| 			vfre |= BIT(vf_shift);
 | |
| 		IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), vfre);
 | |
| 
 | |
| 		if (err) {
 | |
| 			e_err(drv, "VF max_frame %d out of range\n", max_frame);
 | |
| 			return err;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* MTU < 68 is an error and causes problems on some kernels */
 | |
| 	if (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE) {
 | |
| 		e_err(drv, "VF max_frame %d out of range\n", max_frame);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	/* pull current max frame size from hardware */
 | |
| 	max_frs = IXGBE_READ_REG(hw, IXGBE_MAXFRS);
 | |
| 	max_frs &= IXGBE_MHADD_MFS_MASK;
 | |
| 	max_frs >>= IXGBE_MHADD_MFS_SHIFT;
 | |
| 
 | |
| 	if (max_frs < max_frame) {
 | |
| 		max_frs = max_frame << IXGBE_MHADD_MFS_SHIFT;
 | |
| 		IXGBE_WRITE_REG(hw, IXGBE_MAXFRS, max_frs);
 | |
| 	}
 | |
| 
 | |
| 	e_info(hw, "VF requests change max MTU to %d\n", max_frame);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void ixgbe_set_vmolr(struct ixgbe_hw *hw, u32 vf, bool aupe)
 | |
| {
 | |
| 	u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf));
 | |
| 	vmolr |= IXGBE_VMOLR_BAM;
 | |
| 	if (aupe)
 | |
| 		vmolr |= IXGBE_VMOLR_AUPE;
 | |
| 	else
 | |
| 		vmolr &= ~IXGBE_VMOLR_AUPE;
 | |
| 	IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr);
 | |
| }
 | |
| 
 | |
| static void ixgbe_clear_vmvir(struct ixgbe_adapter *adapter, u32 vf)
 | |
| {
 | |
| 	struct ixgbe_hw *hw = &adapter->hw;
 | |
| 
 | |
| 	IXGBE_WRITE_REG(hw, IXGBE_VMVIR(vf), 0);
 | |
| }
 | |
| 
 | |
| static void ixgbe_clear_vf_vlans(struct ixgbe_adapter *adapter, u32 vf)
 | |
| {
 | |
| 	struct ixgbe_hw *hw = &adapter->hw;
 | |
| 	u32 vlvfb_mask, pool_mask, i;
 | |
| 
 | |
| 	/* create mask for VF and other pools */
 | |
| 	pool_mask = ~BIT(VMDQ_P(0) % 32);
 | |
| 	vlvfb_mask = BIT(vf % 32);
 | |
| 
 | |
| 	/* post increment loop, covers VLVF_ENTRIES - 1 to 0 */
 | |
| 	for (i = IXGBE_VLVF_ENTRIES; i--;) {
 | |
| 		u32 bits[2], vlvfb, vid, vfta, vlvf;
 | |
| 		u32 word = i * 2 + vf / 32;
 | |
| 		u32 mask;
 | |
| 
 | |
| 		vlvfb = IXGBE_READ_REG(hw, IXGBE_VLVFB(word));
 | |
| 
 | |
| 		/* if our bit isn't set we can skip it */
 | |
| 		if (!(vlvfb & vlvfb_mask))
 | |
| 			continue;
 | |
| 
 | |
| 		/* clear our bit from vlvfb */
 | |
| 		vlvfb ^= vlvfb_mask;
 | |
| 
 | |
| 		/* create 64b mask to chedk to see if we should clear VLVF */
 | |
| 		bits[word % 2] = vlvfb;
 | |
| 		bits[~word % 2] = IXGBE_READ_REG(hw, IXGBE_VLVFB(word ^ 1));
 | |
| 
 | |
| 		/* if other pools are present, just remove ourselves */
 | |
| 		if (bits[(VMDQ_P(0) / 32) ^ 1] ||
 | |
| 		    (bits[VMDQ_P(0) / 32] & pool_mask))
 | |
| 			goto update_vlvfb;
 | |
| 
 | |
| 		/* if PF is present, leave VFTA */
 | |
| 		if (bits[0] || bits[1])
 | |
| 			goto update_vlvf;
 | |
| 
 | |
| 		/* if we cannot determine VLAN just remove ourselves */
 | |
| 		vlvf = IXGBE_READ_REG(hw, IXGBE_VLVF(i));
 | |
| 		if (!vlvf)
 | |
| 			goto update_vlvfb;
 | |
| 
 | |
| 		vid = vlvf & VLAN_VID_MASK;
 | |
| 		mask = BIT(vid % 32);
 | |
| 
 | |
| 		/* clear bit from VFTA */
 | |
| 		vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(vid / 32));
 | |
| 		if (vfta & mask)
 | |
| 			IXGBE_WRITE_REG(hw, IXGBE_VFTA(vid / 32), vfta ^ mask);
 | |
| update_vlvf:
 | |
| 		/* clear POOL selection enable */
 | |
| 		IXGBE_WRITE_REG(hw, IXGBE_VLVF(i), 0);
 | |
| 
 | |
| 		if (!(adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC))
 | |
| 			vlvfb = 0;
 | |
| update_vlvfb:
 | |
| 		/* clear pool bits */
 | |
| 		IXGBE_WRITE_REG(hw, IXGBE_VLVFB(word), vlvfb);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int ixgbe_set_vf_macvlan(struct ixgbe_adapter *adapter,
 | |
| 				int vf, int index, unsigned char *mac_addr)
 | |
| {
 | |
| 	struct vf_macvlans *entry;
 | |
| 	struct list_head *pos;
 | |
| 	int retval = 0;
 | |
| 
 | |
| 	if (index <= 1) {
 | |
| 		list_for_each(pos, &adapter->vf_mvs.l) {
 | |
| 			entry = list_entry(pos, struct vf_macvlans, l);
 | |
| 			if (entry->vf == vf) {
 | |
| 				entry->vf = -1;
 | |
| 				entry->free = true;
 | |
| 				entry->is_macvlan = false;
 | |
| 				ixgbe_del_mac_filter(adapter,
 | |
| 						     entry->vf_macvlan, vf);
 | |
| 			}
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * If index was zero then we were asked to clear the uc list
 | |
| 	 * for the VF.  We're done.
 | |
| 	 */
 | |
| 	if (!index)
 | |
| 		return 0;
 | |
| 
 | |
| 	entry = NULL;
 | |
| 
 | |
| 	list_for_each(pos, &adapter->vf_mvs.l) {
 | |
| 		entry = list_entry(pos, struct vf_macvlans, l);
 | |
| 		if (entry->free)
 | |
| 			break;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * If we traversed the entire list and didn't find a free entry
 | |
| 	 * then we're out of space on the RAR table.  Also entry may
 | |
| 	 * be NULL because the original memory allocation for the list
 | |
| 	 * failed, which is not fatal but does mean we can't support
 | |
| 	 * VF requests for MACVLAN because we couldn't allocate
 | |
| 	 * memory for the list management required.
 | |
| 	 */
 | |
| 	if (!entry || !entry->free)
 | |
| 		return -ENOSPC;
 | |
| 
 | |
| 	retval = ixgbe_add_mac_filter(adapter, mac_addr, vf);
 | |
| 	if (retval < 0)
 | |
| 		return retval;
 | |
| 
 | |
| 	entry->free = false;
 | |
| 	entry->is_macvlan = true;
 | |
| 	entry->vf = vf;
 | |
| 	memcpy(entry->vf_macvlan, mac_addr, ETH_ALEN);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static inline void ixgbe_vf_reset_event(struct ixgbe_adapter *adapter, u32 vf)
 | |
| {
 | |
| 	struct ixgbe_hw *hw = &adapter->hw;
 | |
| 	struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
 | |
| 	struct vf_data_storage *vfinfo = &adapter->vfinfo[vf];
 | |
| 	u32 q_per_pool = __ALIGN_MASK(1, ~vmdq->mask);
 | |
| 	u8 num_tcs = adapter->hw_tcs;
 | |
| 	u32 reg_val;
 | |
| 	u32 queue;
 | |
| 
 | |
| 	/* remove VLAN filters beloning to this VF */
 | |
| 	ixgbe_clear_vf_vlans(adapter, vf);
 | |
| 
 | |
| 	/* add back PF assigned VLAN or VLAN 0 */
 | |
| 	ixgbe_set_vf_vlan(adapter, true, vfinfo->pf_vlan, vf);
 | |
| 
 | |
| 	/* reset offloads to defaults */
 | |
| 	ixgbe_set_vmolr(hw, vf, !vfinfo->pf_vlan);
 | |
| 
 | |
| 	/* set outgoing tags for VFs */
 | |
| 	if (!vfinfo->pf_vlan && !vfinfo->pf_qos && !num_tcs) {
 | |
| 		ixgbe_clear_vmvir(adapter, vf);
 | |
| 	} else {
 | |
| 		if (vfinfo->pf_qos || !num_tcs)
 | |
| 			ixgbe_set_vmvir(adapter, vfinfo->pf_vlan,
 | |
| 					vfinfo->pf_qos, vf);
 | |
| 		else
 | |
| 			ixgbe_set_vmvir(adapter, vfinfo->pf_vlan,
 | |
| 					adapter->default_up, vf);
 | |
| 
 | |
| 		if (vfinfo->spoofchk_enabled) {
 | |
| 			hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf);
 | |
| 			hw->mac.ops.set_mac_anti_spoofing(hw, true, vf);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* reset multicast table array for vf */
 | |
| 	adapter->vfinfo[vf].num_vf_mc_hashes = 0;
 | |
| 
 | |
| 	/* clear any ipsec table info */
 | |
| 	ixgbe_ipsec_vf_clear(adapter, vf);
 | |
| 
 | |
| 	/* Flush and reset the mta with the new values */
 | |
| 	ixgbe_set_rx_mode(adapter->netdev);
 | |
| 
 | |
| 	ixgbe_del_mac_filter(adapter, adapter->vfinfo[vf].vf_mac_addresses, vf);
 | |
| 	ixgbe_set_vf_macvlan(adapter, vf, 0, NULL);
 | |
| 
 | |
| 	/* reset VF api back to unknown */
 | |
| 	adapter->vfinfo[vf].vf_api = ixgbe_mbox_api_10;
 | |
| 
 | |
| 	/* Restart each queue for given VF */
 | |
| 	for (queue = 0; queue < q_per_pool; queue++) {
 | |
| 		unsigned int reg_idx = (vf * q_per_pool) + queue;
 | |
| 
 | |
| 		reg_val = IXGBE_READ_REG(hw, IXGBE_PVFTXDCTL(reg_idx));
 | |
| 
 | |
| 		/* Re-enabling only configured queues */
 | |
| 		if (reg_val) {
 | |
| 			reg_val |= IXGBE_TXDCTL_ENABLE;
 | |
| 			IXGBE_WRITE_REG(hw, IXGBE_PVFTXDCTL(reg_idx), reg_val);
 | |
| 			reg_val &= ~IXGBE_TXDCTL_ENABLE;
 | |
| 			IXGBE_WRITE_REG(hw, IXGBE_PVFTXDCTL(reg_idx), reg_val);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	IXGBE_WRITE_FLUSH(hw);
 | |
| }
 | |
| 
 | |
| static void ixgbe_vf_clear_mbx(struct ixgbe_adapter *adapter, u32 vf)
 | |
| {
 | |
| 	struct ixgbe_hw *hw = &adapter->hw;
 | |
| 	u32 word;
 | |
| 
 | |
| 	/* Clear VF's mailbox memory */
 | |
| 	for (word = 0; word < IXGBE_VFMAILBOX_SIZE; word++)
 | |
| 		IXGBE_WRITE_REG_ARRAY(hw, IXGBE_PFMBMEM(vf), word, 0);
 | |
| 
 | |
| 	IXGBE_WRITE_FLUSH(hw);
 | |
| }
 | |
| 
 | |
| static int ixgbe_set_vf_mac(struct ixgbe_adapter *adapter,
 | |
| 			    int vf, unsigned char *mac_addr)
 | |
| {
 | |
| 	s32 retval;
 | |
| 
 | |
| 	ixgbe_del_mac_filter(adapter, adapter->vfinfo[vf].vf_mac_addresses, vf);
 | |
| 	retval = ixgbe_add_mac_filter(adapter, mac_addr, vf);
 | |
| 	if (retval >= 0)
 | |
| 		memcpy(adapter->vfinfo[vf].vf_mac_addresses, mac_addr,
 | |
| 		       ETH_ALEN);
 | |
| 	else
 | |
| 		memset(adapter->vfinfo[vf].vf_mac_addresses, 0, ETH_ALEN);
 | |
| 
 | |
| 	return retval;
 | |
| }
 | |
| 
 | |
| int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask)
 | |
| {
 | |
| 	struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
 | |
| 	unsigned int vfn = (event_mask & 0x3f);
 | |
| 
 | |
| 	bool enable = ((event_mask & 0x10000000U) != 0);
 | |
| 
 | |
| 	if (enable)
 | |
| 		eth_zero_addr(adapter->vfinfo[vfn].vf_mac_addresses);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static inline void ixgbe_write_qde(struct ixgbe_adapter *adapter, u32 vf,
 | |
| 				   u32 qde)
 | |
| {
 | |
| 	struct ixgbe_hw *hw = &adapter->hw;
 | |
| 	struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
 | |
| 	u32 q_per_pool = __ALIGN_MASK(1, ~vmdq->mask);
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = vf * q_per_pool; i < ((vf + 1) * q_per_pool); i++) {
 | |
| 		u32 reg;
 | |
| 
 | |
| 		/* flush previous write */
 | |
| 		IXGBE_WRITE_FLUSH(hw);
 | |
| 
 | |
| 		/* indicate to hardware that we want to set drop enable */
 | |
| 		reg = IXGBE_QDE_WRITE | qde;
 | |
| 		reg |= i <<  IXGBE_QDE_IDX_SHIFT;
 | |
| 		IXGBE_WRITE_REG(hw, IXGBE_QDE, reg);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int ixgbe_vf_reset_msg(struct ixgbe_adapter *adapter, u32 vf)
 | |
| {
 | |
| 	struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
 | |
| 	struct ixgbe_hw *hw = &adapter->hw;
 | |
| 	unsigned char *vf_mac = adapter->vfinfo[vf].vf_mac_addresses;
 | |
| 	u32 reg, reg_offset, vf_shift;
 | |
| 	u32 msgbuf[4] = {0, 0, 0, 0};
 | |
| 	u8 *addr = (u8 *)(&msgbuf[1]);
 | |
| 	u32 q_per_pool = __ALIGN_MASK(1, ~vmdq->mask);
 | |
| 	int i;
 | |
| 
 | |
| 	e_info(probe, "VF Reset msg received from vf %d\n", vf);
 | |
| 
 | |
| 	/* reset the filters for the device */
 | |
| 	ixgbe_vf_reset_event(adapter, vf);
 | |
| 
 | |
| 	ixgbe_vf_clear_mbx(adapter, vf);
 | |
| 
 | |
| 	/* set vf mac address */
 | |
| 	if (!is_zero_ether_addr(vf_mac))
 | |
| 		ixgbe_set_vf_mac(adapter, vf, vf_mac);
 | |
| 
 | |
| 	vf_shift = vf % 32;
 | |
| 	reg_offset = vf / 32;
 | |
| 
 | |
| 	/* enable transmit for vf */
 | |
| 	reg = IXGBE_READ_REG(hw, IXGBE_VFTE(reg_offset));
 | |
| 	reg |= BIT(vf_shift);
 | |
| 	IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset), reg);
 | |
| 
 | |
| 	/* force drop enable for all VF Rx queues */
 | |
| 	reg = IXGBE_QDE_ENABLE;
 | |
| 	if (adapter->vfinfo[vf].pf_vlan)
 | |
| 		reg |= IXGBE_QDE_HIDE_VLAN;
 | |
| 
 | |
| 	ixgbe_write_qde(adapter, vf, reg);
 | |
| 
 | |
| 	/* enable receive for vf */
 | |
| 	reg = IXGBE_READ_REG(hw, IXGBE_VFRE(reg_offset));
 | |
| 	reg |= BIT(vf_shift);
 | |
| 	/*
 | |
| 	 * The 82599 cannot support a mix of jumbo and non-jumbo PF/VFs.
 | |
| 	 * For more info take a look at ixgbe_set_vf_lpe
 | |
| 	 */
 | |
| 	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
 | |
| 		struct net_device *dev = adapter->netdev;
 | |
| 		int pf_max_frame = dev->mtu + ETH_HLEN;
 | |
| 
 | |
| #ifdef CONFIG_FCOE
 | |
| 		if (dev->features & NETIF_F_FCOE_MTU)
 | |
| 			pf_max_frame = max_t(int, pf_max_frame,
 | |
| 					     IXGBE_FCOE_JUMBO_FRAME_SIZE);
 | |
| 
 | |
| #endif /* CONFIG_FCOE */
 | |
| 		if (pf_max_frame > ETH_FRAME_LEN)
 | |
| 			reg &= ~BIT(vf_shift);
 | |
| 	}
 | |
| 	IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), reg);
 | |
| 
 | |
| 	/* enable VF mailbox for further messages */
 | |
| 	adapter->vfinfo[vf].clear_to_send = true;
 | |
| 
 | |
| 	/* Enable counting of spoofed packets in the SSVPC register */
 | |
| 	reg = IXGBE_READ_REG(hw, IXGBE_VMECM(reg_offset));
 | |
| 	reg |= BIT(vf_shift);
 | |
| 	IXGBE_WRITE_REG(hw, IXGBE_VMECM(reg_offset), reg);
 | |
| 
 | |
| 	/*
 | |
| 	 * Reset the VFs TDWBAL and TDWBAH registers
 | |
| 	 * which are not cleared by an FLR
 | |
| 	 */
 | |
| 	for (i = 0; i < q_per_pool; i++) {
 | |
| 		IXGBE_WRITE_REG(hw, IXGBE_PVFTDWBAHn(q_per_pool, vf, i), 0);
 | |
| 		IXGBE_WRITE_REG(hw, IXGBE_PVFTDWBALn(q_per_pool, vf, i), 0);
 | |
| 	}
 | |
| 
 | |
| 	/* reply to reset with ack and vf mac address */
 | |
| 	msgbuf[0] = IXGBE_VF_RESET;
 | |
| 	if (!is_zero_ether_addr(vf_mac) && adapter->vfinfo[vf].pf_set_mac) {
 | |
| 		msgbuf[0] |= IXGBE_VT_MSGTYPE_ACK;
 | |
| 		memcpy(addr, vf_mac, ETH_ALEN);
 | |
| 	} else {
 | |
| 		msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Piggyback the multicast filter type so VF can compute the
 | |
| 	 * correct vectors
 | |
| 	 */
 | |
| 	msgbuf[3] = hw->mac.mc_filter_type;
 | |
| 	ixgbe_write_mbx(hw, msgbuf, IXGBE_VF_PERMADDR_MSG_LEN, vf);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int ixgbe_set_vf_mac_addr(struct ixgbe_adapter *adapter,
 | |
| 				 u32 *msgbuf, u32 vf)
 | |
| {
 | |
| 	u8 *new_mac = ((u8 *)(&msgbuf[1]));
 | |
| 
 | |
| 	if (!is_valid_ether_addr(new_mac)) {
 | |
| 		e_warn(drv, "VF %d attempted to set invalid mac\n", vf);
 | |
| 		return -1;
 | |
| 	}
 | |
| 
 | |
| 	if (adapter->vfinfo[vf].pf_set_mac && !adapter->vfinfo[vf].trusted &&
 | |
| 	    !ether_addr_equal(adapter->vfinfo[vf].vf_mac_addresses, new_mac)) {
 | |
| 		e_warn(drv,
 | |
| 		       "VF %d attempted to override administratively set MAC address\n"
 | |
| 		       "Reload the VF driver to resume operations\n",
 | |
| 		       vf);
 | |
| 		return -1;
 | |
| 	}
 | |
| 
 | |
| 	return ixgbe_set_vf_mac(adapter, vf, new_mac) < 0;
 | |
| }
 | |
| 
 | |
| static int ixgbe_set_vf_vlan_msg(struct ixgbe_adapter *adapter,
 | |
| 				 u32 *msgbuf, u32 vf)
 | |
| {
 | |
| 	u32 add = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) >> IXGBE_VT_MSGINFO_SHIFT;
 | |
| 	u32 vid = (msgbuf[1] & IXGBE_VLVF_VLANID_MASK);
 | |
| 	u8 tcs = adapter->hw_tcs;
 | |
| 
 | |
| 	if (adapter->vfinfo[vf].pf_vlan || tcs) {
 | |
| 		e_warn(drv,
 | |
| 		       "VF %d attempted to override administratively set VLAN configuration\n"
 | |
| 		       "Reload the VF driver to resume operations\n",
 | |
| 		       vf);
 | |
| 		return -1;
 | |
| 	}
 | |
| 
 | |
| 	/* VLAN 0 is a special case, don't allow it to be removed */
 | |
| 	if (!vid && !add)
 | |
| 		return 0;
 | |
| 
 | |
| 	return ixgbe_set_vf_vlan(adapter, add, vid, vf);
 | |
| }
 | |
| 
 | |
| static int ixgbe_set_vf_macvlan_msg(struct ixgbe_adapter *adapter,
 | |
| 				    u32 *msgbuf, u32 vf)
 | |
| {
 | |
| 	u8 *new_mac = ((u8 *)(&msgbuf[1]));
 | |
| 	int index = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) >>
 | |
| 		    IXGBE_VT_MSGINFO_SHIFT;
 | |
| 	int err;
 | |
| 
 | |
| 	if (adapter->vfinfo[vf].pf_set_mac && !adapter->vfinfo[vf].trusted &&
 | |
| 	    index > 0) {
 | |
| 		e_warn(drv,
 | |
| 		       "VF %d requested MACVLAN filter but is administratively denied\n",
 | |
| 		       vf);
 | |
| 		return -1;
 | |
| 	}
 | |
| 
 | |
| 	/* An non-zero index indicates the VF is setting a filter */
 | |
| 	if (index) {
 | |
| 		if (!is_valid_ether_addr(new_mac)) {
 | |
| 			e_warn(drv, "VF %d attempted to set invalid mac\n", vf);
 | |
| 			return -1;
 | |
| 		}
 | |
| 
 | |
| 		/*
 | |
| 		 * If the VF is allowed to set MAC filters then turn off
 | |
| 		 * anti-spoofing to avoid false positives.
 | |
| 		 */
 | |
| 		if (adapter->vfinfo[vf].spoofchk_enabled) {
 | |
| 			struct ixgbe_hw *hw = &adapter->hw;
 | |
| 
 | |
| 			hw->mac.ops.set_mac_anti_spoofing(hw, false, vf);
 | |
| 			hw->mac.ops.set_vlan_anti_spoofing(hw, false, vf);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	err = ixgbe_set_vf_macvlan(adapter, vf, index, new_mac);
 | |
| 	if (err == -ENOSPC)
 | |
| 		e_warn(drv,
 | |
| 		       "VF %d has requested a MACVLAN filter but there is no space for it\n",
 | |
| 		       vf);
 | |
| 
 | |
| 	return err < 0;
 | |
| }
 | |
| 
 | |
| static int ixgbe_negotiate_vf_api(struct ixgbe_adapter *adapter,
 | |
| 				  u32 *msgbuf, u32 vf)
 | |
| {
 | |
| 	int api = msgbuf[1];
 | |
| 
 | |
| 	switch (api) {
 | |
| 	case ixgbe_mbox_api_10:
 | |
| 	case ixgbe_mbox_api_11:
 | |
| 	case ixgbe_mbox_api_12:
 | |
| 	case ixgbe_mbox_api_13:
 | |
| 	case ixgbe_mbox_api_14:
 | |
| 		adapter->vfinfo[vf].vf_api = api;
 | |
| 		return 0;
 | |
| 	default:
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	e_info(drv, "VF %d requested invalid api version %u\n", vf, api);
 | |
| 
 | |
| 	return -1;
 | |
| }
 | |
| 
 | |
| static int ixgbe_get_vf_queues(struct ixgbe_adapter *adapter,
 | |
| 			       u32 *msgbuf, u32 vf)
 | |
| {
 | |
| 	struct net_device *dev = adapter->netdev;
 | |
| 	struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
 | |
| 	unsigned int default_tc = 0;
 | |
| 	u8 num_tcs = adapter->hw_tcs;
 | |
| 
 | |
| 	/* verify the PF is supporting the correct APIs */
 | |
| 	switch (adapter->vfinfo[vf].vf_api) {
 | |
| 	case ixgbe_mbox_api_20:
 | |
| 	case ixgbe_mbox_api_11:
 | |
| 	case ixgbe_mbox_api_12:
 | |
| 	case ixgbe_mbox_api_13:
 | |
| 	case ixgbe_mbox_api_14:
 | |
| 		break;
 | |
| 	default:
 | |
| 		return -1;
 | |
| 	}
 | |
| 
 | |
| 	/* only allow 1 Tx queue for bandwidth limiting */
 | |
| 	msgbuf[IXGBE_VF_TX_QUEUES] = __ALIGN_MASK(1, ~vmdq->mask);
 | |
| 	msgbuf[IXGBE_VF_RX_QUEUES] = __ALIGN_MASK(1, ~vmdq->mask);
 | |
| 
 | |
| 	/* if TCs > 1 determine which TC belongs to default user priority */
 | |
| 	if (num_tcs > 1)
 | |
| 		default_tc = netdev_get_prio_tc_map(dev, adapter->default_up);
 | |
| 
 | |
| 	/* notify VF of need for VLAN tag stripping, and correct queue */
 | |
| 	if (num_tcs)
 | |
| 		msgbuf[IXGBE_VF_TRANS_VLAN] = num_tcs;
 | |
| 	else if (adapter->vfinfo[vf].pf_vlan || adapter->vfinfo[vf].pf_qos)
 | |
| 		msgbuf[IXGBE_VF_TRANS_VLAN] = 1;
 | |
| 	else
 | |
| 		msgbuf[IXGBE_VF_TRANS_VLAN] = 0;
 | |
| 
 | |
| 	/* notify VF of default queue */
 | |
| 	msgbuf[IXGBE_VF_DEF_QUEUE] = default_tc;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int ixgbe_get_vf_reta(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf)
 | |
| {
 | |
| 	u32 i, j;
 | |
| 	u32 *out_buf = &msgbuf[1];
 | |
| 	const u8 *reta = adapter->rss_indir_tbl;
 | |
| 	u32 reta_size = ixgbe_rss_indir_tbl_entries(adapter);
 | |
| 
 | |
| 	/* Check if operation is permitted */
 | |
| 	if (!adapter->vfinfo[vf].rss_query_enabled)
 | |
| 		return -EPERM;
 | |
| 
 | |
| 	/* verify the PF is supporting the correct API */
 | |
| 	switch (adapter->vfinfo[vf].vf_api) {
 | |
| 	case ixgbe_mbox_api_14:
 | |
| 	case ixgbe_mbox_api_13:
 | |
| 	case ixgbe_mbox_api_12:
 | |
| 		break;
 | |
| 	default:
 | |
| 		return -EOPNOTSUPP;
 | |
| 	}
 | |
| 
 | |
| 	/* This mailbox command is supported (required) only for 82599 and x540
 | |
| 	 * VFs which support up to 4 RSS queues. Therefore we will compress the
 | |
| 	 * RETA by saving only 2 bits from each entry. This way we will be able
 | |
| 	 * to transfer the whole RETA in a single mailbox operation.
 | |
| 	 */
 | |
| 	for (i = 0; i < reta_size / 16; i++) {
 | |
| 		out_buf[i] = 0;
 | |
| 		for (j = 0; j < 16; j++)
 | |
| 			out_buf[i] |= (u32)(reta[16 * i + j] & 0x3) << (2 * j);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int ixgbe_get_vf_rss_key(struct ixgbe_adapter *adapter,
 | |
| 				u32 *msgbuf, u32 vf)
 | |
| {
 | |
| 	u32 *rss_key = &msgbuf[1];
 | |
| 
 | |
| 	/* Check if the operation is permitted */
 | |
| 	if (!adapter->vfinfo[vf].rss_query_enabled)
 | |
| 		return -EPERM;
 | |
| 
 | |
| 	/* verify the PF is supporting the correct API */
 | |
| 	switch (adapter->vfinfo[vf].vf_api) {
 | |
| 	case ixgbe_mbox_api_14:
 | |
| 	case ixgbe_mbox_api_13:
 | |
| 	case ixgbe_mbox_api_12:
 | |
| 		break;
 | |
| 	default:
 | |
| 		return -EOPNOTSUPP;
 | |
| 	}
 | |
| 
 | |
| 	memcpy(rss_key, adapter->rss_key, IXGBE_RSS_KEY_SIZE);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int ixgbe_update_vf_xcast_mode(struct ixgbe_adapter *adapter,
 | |
| 				      u32 *msgbuf, u32 vf)
 | |
| {
 | |
| 	struct ixgbe_hw *hw = &adapter->hw;
 | |
| 	int xcast_mode = msgbuf[1];
 | |
| 	u32 vmolr, fctrl, disable, enable;
 | |
| 
 | |
| 	/* verify the PF is supporting the correct APIs */
 | |
| 	switch (adapter->vfinfo[vf].vf_api) {
 | |
| 	case ixgbe_mbox_api_12:
 | |
| 		/* promisc introduced in 1.3 version */
 | |
| 		if (xcast_mode == IXGBEVF_XCAST_MODE_PROMISC)
 | |
| 			return -EOPNOTSUPP;
 | |
| 		/* Fall through */
 | |
| 	case ixgbe_mbox_api_13:
 | |
| 	case ixgbe_mbox_api_14:
 | |
| 		break;
 | |
| 	default:
 | |
| 		return -EOPNOTSUPP;
 | |
| 	}
 | |
| 
 | |
| 	if (xcast_mode > IXGBEVF_XCAST_MODE_MULTI &&
 | |
| 	    !adapter->vfinfo[vf].trusted) {
 | |
| 		xcast_mode = IXGBEVF_XCAST_MODE_MULTI;
 | |
| 	}
 | |
| 
 | |
| 	if (adapter->vfinfo[vf].xcast_mode == xcast_mode)
 | |
| 		goto out;
 | |
| 
 | |
| 	switch (xcast_mode) {
 | |
| 	case IXGBEVF_XCAST_MODE_NONE:
 | |
| 		disable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE |
 | |
| 			  IXGBE_VMOLR_MPE | IXGBE_VMOLR_UPE | IXGBE_VMOLR_VPE;
 | |
| 		enable = 0;
 | |
| 		break;
 | |
| 	case IXGBEVF_XCAST_MODE_MULTI:
 | |
| 		disable = IXGBE_VMOLR_MPE | IXGBE_VMOLR_UPE | IXGBE_VMOLR_VPE;
 | |
| 		enable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE;
 | |
| 		break;
 | |
| 	case IXGBEVF_XCAST_MODE_ALLMULTI:
 | |
| 		disable = IXGBE_VMOLR_UPE | IXGBE_VMOLR_VPE;
 | |
| 		enable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE | IXGBE_VMOLR_MPE;
 | |
| 		break;
 | |
| 	case IXGBEVF_XCAST_MODE_PROMISC:
 | |
| 		if (hw->mac.type <= ixgbe_mac_82599EB)
 | |
| 			return -EOPNOTSUPP;
 | |
| 
 | |
| 		fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
 | |
| 		if (!(fctrl & IXGBE_FCTRL_UPE)) {
 | |
| 			/* VF promisc requires PF in promisc */
 | |
| 			e_warn(drv,
 | |
| 			       "Enabling VF promisc requires PF in promisc\n");
 | |
| 			return -EPERM;
 | |
| 		}
 | |
| 
 | |
| 		disable = 0;
 | |
| 		enable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE |
 | |
| 			 IXGBE_VMOLR_MPE | IXGBE_VMOLR_UPE | IXGBE_VMOLR_VPE;
 | |
| 		break;
 | |
| 	default:
 | |
| 		return -EOPNOTSUPP;
 | |
| 	}
 | |
| 
 | |
| 	vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf));
 | |
| 	vmolr &= ~disable;
 | |
| 	vmolr |= enable;
 | |
| 	IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr);
 | |
| 
 | |
| 	adapter->vfinfo[vf].xcast_mode = xcast_mode;
 | |
| 
 | |
| out:
 | |
| 	msgbuf[1] = xcast_mode;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
 | |
| {
 | |
| 	u32 mbx_size = IXGBE_VFMAILBOX_SIZE;
 | |
| 	u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
 | |
| 	struct ixgbe_hw *hw = &adapter->hw;
 | |
| 	s32 retval;
 | |
| 
 | |
| 	retval = ixgbe_read_mbx(hw, msgbuf, mbx_size, vf);
 | |
| 
 | |
| 	if (retval) {
 | |
| 		pr_err("Error receiving message from VF\n");
 | |
| 		return retval;
 | |
| 	}
 | |
| 
 | |
| 	/* this is a message we already processed, do nothing */
 | |
| 	if (msgbuf[0] & (IXGBE_VT_MSGTYPE_ACK | IXGBE_VT_MSGTYPE_NACK))
 | |
| 		return 0;
 | |
| 
 | |
| 	/* flush the ack before we write any messages back */
 | |
| 	IXGBE_WRITE_FLUSH(hw);
 | |
| 
 | |
| 	if (msgbuf[0] == IXGBE_VF_RESET)
 | |
| 		return ixgbe_vf_reset_msg(adapter, vf);
 | |
| 
 | |
| 	/*
 | |
| 	 * until the vf completes a virtual function reset it should not be
 | |
| 	 * allowed to start any configuration.
 | |
| 	 */
 | |
| 	if (!adapter->vfinfo[vf].clear_to_send) {
 | |
| 		msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
 | |
| 		ixgbe_write_mbx(hw, msgbuf, 1, vf);
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	switch ((msgbuf[0] & 0xFFFF)) {
 | |
| 	case IXGBE_VF_SET_MAC_ADDR:
 | |
| 		retval = ixgbe_set_vf_mac_addr(adapter, msgbuf, vf);
 | |
| 		break;
 | |
| 	case IXGBE_VF_SET_MULTICAST:
 | |
| 		retval = ixgbe_set_vf_multicasts(adapter, msgbuf, vf);
 | |
| 		break;
 | |
| 	case IXGBE_VF_SET_VLAN:
 | |
| 		retval = ixgbe_set_vf_vlan_msg(adapter, msgbuf, vf);
 | |
| 		break;
 | |
| 	case IXGBE_VF_SET_LPE:
 | |
| 		retval = ixgbe_set_vf_lpe(adapter, msgbuf, vf);
 | |
| 		break;
 | |
| 	case IXGBE_VF_SET_MACVLAN:
 | |
| 		retval = ixgbe_set_vf_macvlan_msg(adapter, msgbuf, vf);
 | |
| 		break;
 | |
| 	case IXGBE_VF_API_NEGOTIATE:
 | |
| 		retval = ixgbe_negotiate_vf_api(adapter, msgbuf, vf);
 | |
| 		break;
 | |
| 	case IXGBE_VF_GET_QUEUES:
 | |
| 		retval = ixgbe_get_vf_queues(adapter, msgbuf, vf);
 | |
| 		break;
 | |
| 	case IXGBE_VF_GET_RETA:
 | |
| 		retval = ixgbe_get_vf_reta(adapter, msgbuf, vf);
 | |
| 		break;
 | |
| 	case IXGBE_VF_GET_RSS_KEY:
 | |
| 		retval = ixgbe_get_vf_rss_key(adapter, msgbuf, vf);
 | |
| 		break;
 | |
| 	case IXGBE_VF_UPDATE_XCAST_MODE:
 | |
| 		retval = ixgbe_update_vf_xcast_mode(adapter, msgbuf, vf);
 | |
| 		break;
 | |
| 	case IXGBE_VF_IPSEC_ADD:
 | |
| 		retval = ixgbe_ipsec_vf_add_sa(adapter, msgbuf, vf);
 | |
| 		break;
 | |
| 	case IXGBE_VF_IPSEC_DEL:
 | |
| 		retval = ixgbe_ipsec_vf_del_sa(adapter, msgbuf, vf);
 | |
| 		break;
 | |
| 	default:
 | |
| 		e_err(drv, "Unhandled Msg %8.8x\n", msgbuf[0]);
 | |
| 		retval = IXGBE_ERR_MBX;
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	/* notify the VF of the results of what it sent us */
 | |
| 	if (retval)
 | |
| 		msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
 | |
| 	else
 | |
| 		msgbuf[0] |= IXGBE_VT_MSGTYPE_ACK;
 | |
| 
 | |
| 	msgbuf[0] |= IXGBE_VT_MSGTYPE_CTS;
 | |
| 
 | |
| 	ixgbe_write_mbx(hw, msgbuf, mbx_size, vf);
 | |
| 
 | |
| 	return retval;
 | |
| }
 | |
| 
 | |
| static void ixgbe_rcv_ack_from_vf(struct ixgbe_adapter *adapter, u32 vf)
 | |
| {
 | |
| 	struct ixgbe_hw *hw = &adapter->hw;
 | |
| 	u32 msg = IXGBE_VT_MSGTYPE_NACK;
 | |
| 
 | |
| 	/* if device isn't clear to send it shouldn't be reading either */
 | |
| 	if (!adapter->vfinfo[vf].clear_to_send)
 | |
| 		ixgbe_write_mbx(hw, &msg, 1, vf);
 | |
| }
 | |
| 
 | |
| void ixgbe_msg_task(struct ixgbe_adapter *adapter)
 | |
| {
 | |
| 	struct ixgbe_hw *hw = &adapter->hw;
 | |
| 	u32 vf;
 | |
| 
 | |
| 	for (vf = 0; vf < adapter->num_vfs; vf++) {
 | |
| 		/* process any reset requests */
 | |
| 		if (!ixgbe_check_for_rst(hw, vf))
 | |
| 			ixgbe_vf_reset_event(adapter, vf);
 | |
| 
 | |
| 		/* process any messages pending */
 | |
| 		if (!ixgbe_check_for_msg(hw, vf))
 | |
| 			ixgbe_rcv_msg_from_vf(adapter, vf);
 | |
| 
 | |
| 		/* process any acks */
 | |
| 		if (!ixgbe_check_for_ack(hw, vf))
 | |
| 			ixgbe_rcv_ack_from_vf(adapter, vf);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| void ixgbe_disable_tx_rx(struct ixgbe_adapter *adapter)
 | |
| {
 | |
| 	struct ixgbe_hw *hw = &adapter->hw;
 | |
| 
 | |
| 	/* disable transmit and receive for all vfs */
 | |
| 	IXGBE_WRITE_REG(hw, IXGBE_VFTE(0), 0);
 | |
| 	IXGBE_WRITE_REG(hw, IXGBE_VFTE(1), 0);
 | |
| 
 | |
| 	IXGBE_WRITE_REG(hw, IXGBE_VFRE(0), 0);
 | |
| 	IXGBE_WRITE_REG(hw, IXGBE_VFRE(1), 0);
 | |
| }
 | |
| 
 | |
| static inline void ixgbe_ping_vf(struct ixgbe_adapter *adapter, int vf)
 | |
| {
 | |
| 	struct ixgbe_hw *hw = &adapter->hw;
 | |
| 	u32 ping;
 | |
| 
 | |
| 	ping = IXGBE_PF_CONTROL_MSG;
 | |
| 	if (adapter->vfinfo[vf].clear_to_send)
 | |
| 		ping |= IXGBE_VT_MSGTYPE_CTS;
 | |
| 	ixgbe_write_mbx(hw, &ping, 1, vf);
 | |
| }
 | |
| 
 | |
| void ixgbe_ping_all_vfs(struct ixgbe_adapter *adapter)
 | |
| {
 | |
| 	struct ixgbe_hw *hw = &adapter->hw;
 | |
| 	u32 ping;
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0 ; i < adapter->num_vfs; i++) {
 | |
| 		ping = IXGBE_PF_CONTROL_MSG;
 | |
| 		if (adapter->vfinfo[i].clear_to_send)
 | |
| 			ping |= IXGBE_VT_MSGTYPE_CTS;
 | |
| 		ixgbe_write_mbx(hw, &ping, 1, i);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| int ixgbe_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
 | |
| {
 | |
| 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 | |
| 	s32 retval;
 | |
| 
 | |
| 	if (vf >= adapter->num_vfs)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	if (is_valid_ether_addr(mac)) {
 | |
| 		dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n",
 | |
| 			 mac, vf);
 | |
| 		dev_info(&adapter->pdev->dev, "Reload the VF driver to make this change effective.");
 | |
| 
 | |
| 		retval = ixgbe_set_vf_mac(adapter, vf, mac);
 | |
| 		if (retval >= 0) {
 | |
| 			adapter->vfinfo[vf].pf_set_mac = true;
 | |
| 
 | |
| 			if (test_bit(__IXGBE_DOWN, &adapter->state)) {
 | |
| 				dev_warn(&adapter->pdev->dev, "The VF MAC address has been set, but the PF device is not up.\n");
 | |
| 				dev_warn(&adapter->pdev->dev, "Bring the PF device up before attempting to use the VF device.\n");
 | |
| 			}
 | |
| 		} else {
 | |
| 			dev_warn(&adapter->pdev->dev, "The VF MAC address was NOT set due to invalid or duplicate MAC address.\n");
 | |
| 		}
 | |
| 	} else if (is_zero_ether_addr(mac)) {
 | |
| 		unsigned char *vf_mac_addr =
 | |
| 					   adapter->vfinfo[vf].vf_mac_addresses;
 | |
| 
 | |
| 		/* nothing to do */
 | |
| 		if (is_zero_ether_addr(vf_mac_addr))
 | |
| 			return 0;
 | |
| 
 | |
| 		dev_info(&adapter->pdev->dev, "removing MAC on VF %d\n", vf);
 | |
| 
 | |
| 		retval = ixgbe_del_mac_filter(adapter, vf_mac_addr, vf);
 | |
| 		if (retval >= 0) {
 | |
| 			adapter->vfinfo[vf].pf_set_mac = false;
 | |
| 			memcpy(vf_mac_addr, mac, ETH_ALEN);
 | |
| 		} else {
 | |
| 			dev_warn(&adapter->pdev->dev, "Could NOT remove the VF MAC address.\n");
 | |
| 		}
 | |
| 	} else {
 | |
| 		retval = -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	return retval;
 | |
| }
 | |
| 
 | |
| static int ixgbe_enable_port_vlan(struct ixgbe_adapter *adapter, int vf,
 | |
| 				  u16 vlan, u8 qos)
 | |
| {
 | |
| 	struct ixgbe_hw *hw = &adapter->hw;
 | |
| 	int err;
 | |
| 
 | |
| 	err = ixgbe_set_vf_vlan(adapter, true, vlan, vf);
 | |
| 	if (err)
 | |
| 		goto out;
 | |
| 
 | |
| 	/* Revoke tagless access via VLAN 0 */
 | |
| 	ixgbe_set_vf_vlan(adapter, false, 0, vf);
 | |
| 
 | |
| 	ixgbe_set_vmvir(adapter, vlan, qos, vf);
 | |
| 	ixgbe_set_vmolr(hw, vf, false);
 | |
| 
 | |
| 	/* enable hide vlan on X550 */
 | |
| 	if (hw->mac.type >= ixgbe_mac_X550)
 | |
| 		ixgbe_write_qde(adapter, vf, IXGBE_QDE_ENABLE |
 | |
| 				IXGBE_QDE_HIDE_VLAN);
 | |
| 
 | |
| 	adapter->vfinfo[vf].pf_vlan = vlan;
 | |
| 	adapter->vfinfo[vf].pf_qos = qos;
 | |
| 	dev_info(&adapter->pdev->dev,
 | |
| 		 "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan, qos, vf);
 | |
| 	if (test_bit(__IXGBE_DOWN, &adapter->state)) {
 | |
| 		dev_warn(&adapter->pdev->dev,
 | |
| 			 "The VF VLAN has been set, but the PF device is not up.\n");
 | |
| 		dev_warn(&adapter->pdev->dev,
 | |
| 			 "Bring the PF device up before attempting to use the VF device.\n");
 | |
| 	}
 | |
| 
 | |
| out:
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int ixgbe_disable_port_vlan(struct ixgbe_adapter *adapter, int vf)
 | |
| {
 | |
| 	struct ixgbe_hw *hw = &adapter->hw;
 | |
| 	int err;
 | |
| 
 | |
| 	err = ixgbe_set_vf_vlan(adapter, false,
 | |
| 				adapter->vfinfo[vf].pf_vlan, vf);
 | |
| 	/* Restore tagless access via VLAN 0 */
 | |
| 	ixgbe_set_vf_vlan(adapter, true, 0, vf);
 | |
| 	ixgbe_clear_vmvir(adapter, vf);
 | |
| 	ixgbe_set_vmolr(hw, vf, true);
 | |
| 
 | |
| 	/* disable hide VLAN on X550 */
 | |
| 	if (hw->mac.type >= ixgbe_mac_X550)
 | |
| 		ixgbe_write_qde(adapter, vf, IXGBE_QDE_ENABLE);
 | |
| 
 | |
| 	adapter->vfinfo[vf].pf_vlan = 0;
 | |
| 	adapter->vfinfo[vf].pf_qos = 0;
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| int ixgbe_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan,
 | |
| 			  u8 qos, __be16 vlan_proto)
 | |
| {
 | |
| 	int err = 0;
 | |
| 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 | |
| 
 | |
| 	if ((vf >= adapter->num_vfs) || (vlan > 4095) || (qos > 7))
 | |
| 		return -EINVAL;
 | |
| 	if (vlan_proto != htons(ETH_P_8021Q))
 | |
| 		return -EPROTONOSUPPORT;
 | |
| 	if (vlan || qos) {
 | |
| 		/* Check if there is already a port VLAN set, if so
 | |
| 		 * we have to delete the old one first before we
 | |
| 		 * can set the new one.  The usage model had
 | |
| 		 * previously assumed the user would delete the
 | |
| 		 * old port VLAN before setting a new one but this
 | |
| 		 * is not necessarily the case.
 | |
| 		 */
 | |
| 		if (adapter->vfinfo[vf].pf_vlan)
 | |
| 			err = ixgbe_disable_port_vlan(adapter, vf);
 | |
| 		if (err)
 | |
| 			goto out;
 | |
| 		err = ixgbe_enable_port_vlan(adapter, vf, vlan, qos);
 | |
| 	} else {
 | |
| 		err = ixgbe_disable_port_vlan(adapter, vf);
 | |
| 	}
 | |
| 
 | |
| out:
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| int ixgbe_link_mbps(struct ixgbe_adapter *adapter)
 | |
| {
 | |
| 	switch (adapter->link_speed) {
 | |
| 	case IXGBE_LINK_SPEED_100_FULL:
 | |
| 		return 100;
 | |
| 	case IXGBE_LINK_SPEED_1GB_FULL:
 | |
| 		return 1000;
 | |
| 	case IXGBE_LINK_SPEED_10GB_FULL:
 | |
| 		return 10000;
 | |
| 	default:
 | |
| 		return 0;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void ixgbe_set_vf_rate_limit(struct ixgbe_adapter *adapter, int vf)
 | |
| {
 | |
| 	struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
 | |
| 	struct ixgbe_hw *hw = &adapter->hw;
 | |
| 	u32 bcnrc_val = 0;
 | |
| 	u16 queue, queues_per_pool;
 | |
| 	u16 tx_rate = adapter->vfinfo[vf].tx_rate;
 | |
| 
 | |
| 	if (tx_rate) {
 | |
| 		/* start with base link speed value */
 | |
| 		bcnrc_val = adapter->vf_rate_link_speed;
 | |
| 
 | |
| 		/* Calculate the rate factor values to set */
 | |
| 		bcnrc_val <<= IXGBE_RTTBCNRC_RF_INT_SHIFT;
 | |
| 		bcnrc_val /= tx_rate;
 | |
| 
 | |
| 		/* clear everything but the rate factor */
 | |
| 		bcnrc_val &= IXGBE_RTTBCNRC_RF_INT_MASK |
 | |
| 			     IXGBE_RTTBCNRC_RF_DEC_MASK;
 | |
| 
 | |
| 		/* enable the rate scheduler */
 | |
| 		bcnrc_val |= IXGBE_RTTBCNRC_RS_ENA;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Set global transmit compensation time to the MMW_SIZE in RTTBCNRM
 | |
| 	 * register. Typically MMW_SIZE=0x014 if 9728-byte jumbo is supported
 | |
| 	 * and 0x004 otherwise.
 | |
| 	 */
 | |
| 	switch (hw->mac.type) {
 | |
| 	case ixgbe_mac_82599EB:
 | |
| 		IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRM, 0x4);
 | |
| 		break;
 | |
| 	case ixgbe_mac_X540:
 | |
| 		IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRM, 0x14);
 | |
| 		break;
 | |
| 	default:
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	/* determine how many queues per pool based on VMDq mask */
 | |
| 	queues_per_pool = __ALIGN_MASK(1, ~vmdq->mask);
 | |
| 
 | |
| 	/* write value for all Tx queues belonging to VF */
 | |
| 	for (queue = 0; queue < queues_per_pool; queue++) {
 | |
| 		unsigned int reg_idx = (vf * queues_per_pool) + queue;
 | |
| 
 | |
| 		IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, reg_idx);
 | |
| 		IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, bcnrc_val);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| void ixgbe_check_vf_rate_limit(struct ixgbe_adapter *adapter)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	/* VF Tx rate limit was not set */
 | |
| 	if (!adapter->vf_rate_link_speed)
 | |
| 		return;
 | |
| 
 | |
| 	if (ixgbe_link_mbps(adapter) != adapter->vf_rate_link_speed) {
 | |
| 		adapter->vf_rate_link_speed = 0;
 | |
| 		dev_info(&adapter->pdev->dev,
 | |
| 			 "Link speed has been changed. VF Transmit rate is disabled\n");
 | |
| 	}
 | |
| 
 | |
| 	for (i = 0; i < adapter->num_vfs; i++) {
 | |
| 		if (!adapter->vf_rate_link_speed)
 | |
| 			adapter->vfinfo[i].tx_rate = 0;
 | |
| 
 | |
| 		ixgbe_set_vf_rate_limit(adapter, i);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int min_tx_rate,
 | |
| 			int max_tx_rate)
 | |
| {
 | |
| 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 | |
| 	int link_speed;
 | |
| 
 | |
| 	/* verify VF is active */
 | |
| 	if (vf >= adapter->num_vfs)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	/* verify link is up */
 | |
| 	if (!adapter->link_up)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	/* verify we are linked at 10Gbps */
 | |
| 	link_speed = ixgbe_link_mbps(adapter);
 | |
| 	if (link_speed != 10000)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	if (min_tx_rate)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	/* rate limit cannot be less than 10Mbs or greater than link speed */
 | |
| 	if (max_tx_rate && ((max_tx_rate <= 10) || (max_tx_rate > link_speed)))
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	/* store values */
 | |
| 	adapter->vf_rate_link_speed = link_speed;
 | |
| 	adapter->vfinfo[vf].tx_rate = max_tx_rate;
 | |
| 
 | |
| 	/* update hardware configuration */
 | |
| 	ixgbe_set_vf_rate_limit(adapter, vf);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| int ixgbe_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, bool setting)
 | |
| {
 | |
| 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 | |
| 	struct ixgbe_hw *hw = &adapter->hw;
 | |
| 
 | |
| 	if (vf >= adapter->num_vfs)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	adapter->vfinfo[vf].spoofchk_enabled = setting;
 | |
| 
 | |
| 	/* configure MAC spoofing */
 | |
| 	hw->mac.ops.set_mac_anti_spoofing(hw, setting, vf);
 | |
| 
 | |
| 	/* configure VLAN spoofing */
 | |
| 	hw->mac.ops.set_vlan_anti_spoofing(hw, setting, vf);
 | |
| 
 | |
| 	/* Ensure LLDP and FC is set for Ethertype Antispoofing if we will be
 | |
| 	 * calling set_ethertype_anti_spoofing for each VF in loop below
 | |
| 	 */
 | |
| 	if (hw->mac.ops.set_ethertype_anti_spoofing) {
 | |
| 		IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_LLDP),
 | |
| 				(IXGBE_ETQF_FILTER_EN    |
 | |
| 				 IXGBE_ETQF_TX_ANTISPOOF |
 | |
| 				 ETH_P_LLDP));
 | |
| 
 | |
| 		IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_FC),
 | |
| 				(IXGBE_ETQF_FILTER_EN |
 | |
| 				 IXGBE_ETQF_TX_ANTISPOOF |
 | |
| 				 ETH_P_PAUSE));
 | |
| 
 | |
| 		hw->mac.ops.set_ethertype_anti_spoofing(hw, setting, vf);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| int ixgbe_ndo_set_vf_rss_query_en(struct net_device *netdev, int vf,
 | |
| 				  bool setting)
 | |
| {
 | |
| 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 | |
| 
 | |
| 	/* This operation is currently supported only for 82599 and x540
 | |
| 	 * devices.
 | |
| 	 */
 | |
| 	if (adapter->hw.mac.type < ixgbe_mac_82599EB ||
 | |
| 	    adapter->hw.mac.type >= ixgbe_mac_X550)
 | |
| 		return -EOPNOTSUPP;
 | |
| 
 | |
| 	if (vf >= adapter->num_vfs)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	adapter->vfinfo[vf].rss_query_enabled = setting;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| int ixgbe_ndo_set_vf_trust(struct net_device *netdev, int vf, bool setting)
 | |
| {
 | |
| 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 | |
| 
 | |
| 	if (vf >= adapter->num_vfs)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	/* nothing to do */
 | |
| 	if (adapter->vfinfo[vf].trusted == setting)
 | |
| 		return 0;
 | |
| 
 | |
| 	adapter->vfinfo[vf].trusted = setting;
 | |
| 
 | |
| 	/* reset VF to reconfigure features */
 | |
| 	adapter->vfinfo[vf].clear_to_send = false;
 | |
| 	ixgbe_ping_vf(adapter, vf);
 | |
| 
 | |
| 	e_info(drv, "VF %u is %strusted\n", vf, setting ? "" : "not ");
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| int ixgbe_ndo_get_vf_config(struct net_device *netdev,
 | |
| 			    int vf, struct ifla_vf_info *ivi)
 | |
| {
 | |
| 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 | |
| 	if (vf >= adapter->num_vfs)
 | |
| 		return -EINVAL;
 | |
| 	ivi->vf = vf;
 | |
| 	memcpy(&ivi->mac, adapter->vfinfo[vf].vf_mac_addresses, ETH_ALEN);
 | |
| 	ivi->max_tx_rate = adapter->vfinfo[vf].tx_rate;
 | |
| 	ivi->min_tx_rate = 0;
 | |
| 	ivi->vlan = adapter->vfinfo[vf].pf_vlan;
 | |
| 	ivi->qos = adapter->vfinfo[vf].pf_qos;
 | |
| 	ivi->spoofchk = adapter->vfinfo[vf].spoofchk_enabled;
 | |
| 	ivi->rss_query_en = adapter->vfinfo[vf].rss_query_enabled;
 | |
| 	ivi->trusted = adapter->vfinfo[vf].trusted;
 | |
| 	return 0;
 | |
| }
 |