Ziyuan Xu 1712c9373f mmc: core: don't try to switch block size for dual rate mode ...

Per spec, block size should always be 512 bytes for dual rate mode,
so any attempts to switch the block size under dual rate mode should
be neglected.

Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

2016-09-26 21:31:34 +02:00

..

bus.c

mmc: core: implement enhanced strobe support

2016-07-25 10:34:05 +02:00

bus.h

mmc: rename dev_to_mmc_card() to mmc_dev_to_card()

2010-10-23 21:11:12 +08:00

core.c

mmc: core: don't try to switch block size for dual rate mode

2016-09-26 21:31:34 +02:00

core.h

mmc: fix mmc_{un,}register_pm_notifier prototypes

2015-12-22 11:32:09 +01:00

debugfs.c

mmc: debugfs: add HS400 enhanced strobe description

2016-07-25 10:34:06 +02:00

host.c

mmc: core: expose MMC_CAP2_NO_* to dt

2016-07-25 10:34:49 +02:00

host.h

mmc: host: Add facility to support re-tuning

2015-06-01 09:06:53 +02:00

Kconfig

mmc: pwrseq: convert to proper platform device

2016-05-02 10:33:30 +02:00

Makefile

mmc: pwrseq: convert to proper platform device

2016-05-02 10:33:30 +02:00

mmc_ops.c

mmc: mmc: fix switch timeout issue caused by jiffies precision

2016-07-25 10:34:09 +02:00

mmc_ops.h

mmc: core: Convert __mmc_switch() into an internal core function

2015-10-26 15:59:54 +01:00

mmc.c

mmc: core: Add error message when switching fails in mmc_select_hs()

2016-09-26 21:31:14 +02:00

pwrseq_emmc.c

mmc: pwrseq: convert to proper platform device

2016-05-02 10:33:30 +02:00

pwrseq_simple.c

mmc: pwrseq-simple: Add an optional post-power-on-delay

2016-09-26 21:31:07 +02:00

pwrseq.c

mmc: pwrseq: convert to proper platform device

2016-05-02 10:33:30 +02:00

pwrseq.h

mmc: pwrseq: convert to proper platform device

2016-05-02 10:33:30 +02:00

quirks.c

mmc: core: Disable HPI for certain Hynix eMMC cards

2016-07-25 10:34:12 +02:00

sd_ops.c

mmc: remove unnecessary assignment statements before return

2016-02-29 11:02:47 +01:00

sd_ops.h

mmc: add erase, secure erase, trim and secure trim operations

2010-08-12 08:43:30 -07:00

sd.c

mmc: sd: Export SD Status via “ssr” device attribute

2016-09-26 21:31:09 +02:00

sd.h

mmc: drop the speed mode of card's state

2014-05-12 18:05:53 -04:00

sdio_bus.c

mmc: enable MMC/SD/SDIO device to suspend/resume asynchronously

2015-12-22 11:32:16 +01:00

sdio_bus.h

…

sdio_cis.c

mmc: sdio: fall back to SDIO 1.0 for broken 1.1 cards

2016-05-16 11:31:27 +02:00

sdio_cis.h

…

sdio_io.c

mmc: sdio: deploy error handling instead of triggering BUG_ON

2016-09-26 21:31:15 +02:00

sdio_irq.c

mmc: core: Remove MMC_CLKGATE

2015-10-26 16:00:09 +01:00

sdio_ops.c

mmc: sdio: deploy error handling instead of triggering BUG_ON

2016-09-26 21:31:15 +02:00

sdio_ops.h

mmc: Add mmc_is_io_op helper function

2015-10-26 16:00:01 +01:00

sdio.c

mmc: core: remove redundant memset of sdio_read_cccr

2016-03-17 14:54:41 +01:00

slot-gpio.c

mmc: slot-gpio: Allow host driver to provide isr for card-detect interrupts

2015-01-19 09:56:29 +01:00

slot-gpio.h

mmc: slot-gpio: Make mmc_gpio_alloc() available for MMC core

2015-01-19 09:56:17 +01:00