mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-09-04 20:19:47 +08:00

Use the SoundWire link number and device unique ID as the firmware file qualifier suffix on CS35L57, CS35L63 and revisions of CS35L56 after B0. The change in wm_adsp needed to support this has been included in this patch because it is fairly trivial. Originally, the firmware file names indicated which amplifier instance they were for by appending the ALSA prefix string. This is the standard ASoC way of distinguishing different instances of the same device. However, on SoundWire systems the SoundWire physical unique address is available as a unique identifier for each amp, and this address is hardwired by a pin on the amp. The firmware files are specific for each physical amp so they must be applied to that amp. Using the ALSA prefix for the filename qualifier means that to name a firmware file it must be determined what prefix string the machine driver will assign to each device and then use that to name the firmware file correctly. This is straightforward in traditional ASoC systems where the machine driver is specific to a particular piece of hardware. But on SoundWire the machine driver is generic and can handle a very wide range of hardware. It is more difficult to determine exactly what the prefix will be on any particular production device, and more prone to mistakes. Also, when the machine driver switches to generating this automatically from SDCA properties in ACPI, there is an additional layer of complexity in determining the mapping. This uncertainty is unnecessary because the firmware is built for a specific amp. with known address, so we can use that directly instead of introducing the redundant intermediate alias. This ensures the firmware is applied to the amp it was intended for. There have not been any firmwares published for CS35L57 or CS35L63, so these can safely be switched to using the SoundWire unique address as the suffix string. Also note that the machine driver in older kernel version only has match entries for the CS35L56 Soundwire identity so any future product with a cs35L57 or CS35L63 would require a new kernel anyway. There are already many published firmware for CS35L56 B0 silicon so this keeps the original naming scheme on those, to preserve backward compatibility. Note that although sdw_slave.id contains a unique_id field, this cannot be trusted because the SoundWire core code also puts magic values into it that it uses as a flag. So the unique ID is read from the chip register. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://patch.msgid.link/20250612121428.1667-2-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
677 lines
18 KiB
C
677 lines
18 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
//
|
|
// CS35L56 ALSA SoC audio driver SoundWire binding
|
|
//
|
|
// Copyright (C) 2023 Cirrus Logic, Inc. and
|
|
// Cirrus Logic International Semiconductor Ltd.
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/soundwire/sdw.h>
|
|
#include <linux/soundwire/sdw_registers.h>
|
|
#include <linux/soundwire/sdw_type.h>
|
|
#include <linux/swab.h>
|
|
#include <linux/types.h>
|
|
#include <linux/workqueue.h>
|
|
|
|
#include "cs35l56.h"
|
|
|
|
/* Register addresses are offset when sent over SoundWire */
|
|
#define CS35L56_SDW_ADDR_OFFSET 0x8000
|
|
|
|
/* Cirrus bus bridge registers */
|
|
#define CS35L56_SDW_MEM_ACCESS_STATUS 0xd0
|
|
#define CS35L56_SDW_MEM_READ_DATA 0xd8
|
|
|
|
#define CS35L56_SDW_LAST_LATE BIT(3)
|
|
#define CS35L56_SDW_CMD_IN_PROGRESS BIT(2)
|
|
#define CS35L56_SDW_RDATA_RDY BIT(0)
|
|
|
|
#define CS35L56_LATE_READ_POLL_US 10
|
|
#define CS35L56_LATE_READ_TIMEOUT_US 1000
|
|
|
|
static int cs35l56_sdw_poll_mem_status(struct sdw_slave *peripheral,
|
|
unsigned int mask,
|
|
unsigned int match)
|
|
{
|
|
int ret, val;
|
|
|
|
ret = read_poll_timeout(sdw_read_no_pm, val,
|
|
(val < 0) || ((val & mask) == match),
|
|
CS35L56_LATE_READ_POLL_US, CS35L56_LATE_READ_TIMEOUT_US,
|
|
false, peripheral, CS35L56_SDW_MEM_ACCESS_STATUS);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (val < 0)
|
|
return val;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cs35l56_sdw_slow_read(struct sdw_slave *peripheral, unsigned int reg,
|
|
u8 *buf, size_t val_size)
|
|
{
|
|
int ret, i;
|
|
|
|
reg += CS35L56_SDW_ADDR_OFFSET;
|
|
|
|
for (i = 0; i < val_size; i += sizeof(u32)) {
|
|
/* Poll for bus bridge idle */
|
|
ret = cs35l56_sdw_poll_mem_status(peripheral,
|
|
CS35L56_SDW_CMD_IN_PROGRESS,
|
|
0);
|
|
if (ret < 0) {
|
|
dev_err(&peripheral->dev, "!CMD_IN_PROGRESS fail: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Reading LSByte triggers read of register to holding buffer */
|
|
sdw_read_no_pm(peripheral, reg + i);
|
|
|
|
/* Wait for data available */
|
|
ret = cs35l56_sdw_poll_mem_status(peripheral,
|
|
CS35L56_SDW_RDATA_RDY,
|
|
CS35L56_SDW_RDATA_RDY);
|
|
if (ret < 0) {
|
|
dev_err(&peripheral->dev, "RDATA_RDY fail: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Read data from buffer */
|
|
ret = sdw_nread_no_pm(peripheral, CS35L56_SDW_MEM_READ_DATA,
|
|
sizeof(u32), &buf[i]);
|
|
if (ret) {
|
|
dev_err(&peripheral->dev, "Late read @%#x failed: %d\n", reg + i, ret);
|
|
return ret;
|
|
}
|
|
|
|
swab32s((u32 *)&buf[i]);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cs35l56_sdw_read_one(struct sdw_slave *peripheral, unsigned int reg, void *buf)
|
|
{
|
|
int ret;
|
|
|
|
ret = sdw_nread_no_pm(peripheral, reg, 4, (u8 *)buf);
|
|
if (ret != 0) {
|
|
dev_err(&peripheral->dev, "Read failed @%#x:%d\n", reg, ret);
|
|
return ret;
|
|
}
|
|
|
|
swab32s((u32 *)buf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cs35l56_sdw_read(void *context, const void *reg_buf,
|
|
const size_t reg_size, void *val_buf,
|
|
size_t val_size)
|
|
{
|
|
struct sdw_slave *peripheral = context;
|
|
u8 *buf8 = val_buf;
|
|
unsigned int reg, bytes;
|
|
int ret;
|
|
|
|
reg = le32_to_cpu(*(const __le32 *)reg_buf);
|
|
|
|
if (cs35l56_is_otp_register(reg))
|
|
return cs35l56_sdw_slow_read(peripheral, reg, buf8, val_size);
|
|
|
|
reg += CS35L56_SDW_ADDR_OFFSET;
|
|
|
|
if (val_size == 4)
|
|
return cs35l56_sdw_read_one(peripheral, reg, val_buf);
|
|
|
|
while (val_size) {
|
|
bytes = SDW_REG_NO_PAGE - (reg & SDW_REGADDR); /* to end of page */
|
|
if (bytes > val_size)
|
|
bytes = val_size;
|
|
|
|
ret = sdw_nread_no_pm(peripheral, reg, bytes, buf8);
|
|
if (ret != 0) {
|
|
dev_err(&peripheral->dev, "Read failed @%#x..%#x:%d\n",
|
|
reg, reg + bytes - 1, ret);
|
|
return ret;
|
|
}
|
|
|
|
swab32_array((u32 *)buf8, bytes / 4);
|
|
val_size -= bytes;
|
|
reg += bytes;
|
|
buf8 += bytes;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline void cs35l56_swab_copy(void *dest, const void *src, size_t nbytes)
|
|
{
|
|
u32 *dest32 = dest;
|
|
const u32 *src32 = src;
|
|
|
|
for (; nbytes > 0; nbytes -= 4)
|
|
*dest32++ = swab32(*src32++);
|
|
}
|
|
|
|
static int cs35l56_sdw_write_one(struct sdw_slave *peripheral, unsigned int reg, const void *buf)
|
|
{
|
|
u32 val_le = swab32(*(u32 *)buf);
|
|
int ret;
|
|
|
|
ret = sdw_nwrite_no_pm(peripheral, reg, 4, (u8 *)&val_le);
|
|
if (ret != 0) {
|
|
dev_err(&peripheral->dev, "Write failed @%#x:%d\n", reg, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cs35l56_sdw_gather_write(void *context,
|
|
const void *reg_buf, size_t reg_size,
|
|
const void *val_buf, size_t val_size)
|
|
{
|
|
struct sdw_slave *peripheral = context;
|
|
const u8 *src_be = val_buf;
|
|
u32 val_le_buf[64]; /* Define u32 so it is 32-bit aligned */
|
|
unsigned int reg, bytes;
|
|
int ret;
|
|
|
|
reg = le32_to_cpu(*(const __le32 *)reg_buf);
|
|
reg += CS35L56_SDW_ADDR_OFFSET;
|
|
|
|
if (val_size == 4)
|
|
return cs35l56_sdw_write_one(peripheral, reg, src_be);
|
|
|
|
while (val_size) {
|
|
bytes = SDW_REG_NO_PAGE - (reg & SDW_REGADDR); /* to end of page */
|
|
if (bytes > val_size)
|
|
bytes = val_size;
|
|
if (bytes > sizeof(val_le_buf))
|
|
bytes = sizeof(val_le_buf);
|
|
|
|
cs35l56_swab_copy(val_le_buf, src_be, bytes);
|
|
|
|
ret = sdw_nwrite_no_pm(peripheral, reg, bytes, (u8 *)val_le_buf);
|
|
if (ret != 0) {
|
|
dev_err(&peripheral->dev, "Write failed @%#x..%#x:%d\n",
|
|
reg, reg + bytes - 1, ret);
|
|
return ret;
|
|
}
|
|
|
|
val_size -= bytes;
|
|
reg += bytes;
|
|
src_be += bytes;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cs35l56_sdw_write(void *context, const void *val_buf, size_t val_size)
|
|
{
|
|
const u8 *src_buf = val_buf;
|
|
|
|
/* First word of val_buf contains the destination address */
|
|
return cs35l56_sdw_gather_write(context, &src_buf[0], 4, &src_buf[4], val_size - 4);
|
|
}
|
|
|
|
/*
|
|
* Registers are big-endian on I2C and SPI but little-endian on SoundWire.
|
|
* Exported firmware controls are big-endian on I2C/SPI but little-endian on
|
|
* SoundWire. Firmware files are always big-endian and are opaque blobs.
|
|
* Present a big-endian regmap and hide the endianness swap, so that the ALSA
|
|
* byte controls always have the same byte order, and firmware file blobs
|
|
* can be written verbatim.
|
|
*/
|
|
static const struct regmap_bus cs35l56_regmap_bus_sdw = {
|
|
.read = cs35l56_sdw_read,
|
|
.write = cs35l56_sdw_write,
|
|
.gather_write = cs35l56_sdw_gather_write,
|
|
.reg_format_endian_default = REGMAP_ENDIAN_LITTLE,
|
|
.val_format_endian_default = REGMAP_ENDIAN_BIG,
|
|
};
|
|
|
|
static int cs35l56_sdw_get_unique_id(struct cs35l56_private *cs35l56)
|
|
{
|
|
int ret;
|
|
|
|
ret = sdw_read_no_pm(cs35l56->sdw_peripheral, SDW_SCP_DEVID_0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
cs35l56->sdw_unique_id = ret & 0xf;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void cs35l56_sdw_init(struct sdw_slave *peripheral)
|
|
{
|
|
struct cs35l56_private *cs35l56 = dev_get_drvdata(&peripheral->dev);
|
|
int ret;
|
|
|
|
pm_runtime_get_noresume(cs35l56->base.dev);
|
|
|
|
ret = cs35l56_sdw_get_unique_id(cs35l56);
|
|
if (ret)
|
|
goto out;
|
|
|
|
/* SoundWire UniqueId is used to index the calibration array */
|
|
if (cs35l56->base.cal_index < 0)
|
|
cs35l56->base.cal_index = cs35l56->sdw_unique_id;
|
|
|
|
ret = cs35l56_init(cs35l56);
|
|
if (ret < 0) {
|
|
regcache_cache_only(cs35l56->base.regmap, true);
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* cs35l56_init can return with !init_done if it triggered
|
|
* a soft reset.
|
|
*/
|
|
if (cs35l56->base.init_done) {
|
|
/* Enable SoundWire interrupts */
|
|
sdw_write_no_pm(peripheral, CS35L56_SDW_GEN_INT_MASK_1,
|
|
CS35L56_SDW_INT_MASK_CODEC_IRQ);
|
|
}
|
|
|
|
out:
|
|
pm_runtime_mark_last_busy(cs35l56->base.dev);
|
|
pm_runtime_put_autosuspend(cs35l56->base.dev);
|
|
}
|
|
|
|
static int cs35l56_sdw_interrupt(struct sdw_slave *peripheral,
|
|
struct sdw_slave_intr_status *status)
|
|
{
|
|
struct cs35l56_private *cs35l56 = dev_get_drvdata(&peripheral->dev);
|
|
|
|
/* SoundWire core holds our pm_runtime when calling this function. */
|
|
|
|
dev_dbg(cs35l56->base.dev, "int control_port=%#x\n", status->control_port);
|
|
|
|
if ((status->control_port & SDW_SCP_INT1_IMPL_DEF) == 0)
|
|
return 0;
|
|
|
|
/*
|
|
* Prevent bus manager suspending and possibly issuing a
|
|
* bus-reset before the queued work has run.
|
|
*/
|
|
pm_runtime_get_noresume(cs35l56->base.dev);
|
|
|
|
/*
|
|
* Mask and clear until it has been handled. The read of GEN_INT_STAT_1
|
|
* is required as per the SoundWire spec for interrupt status bits
|
|
* to clear. GEN_INT_MASK_1 masks the _inputs_ to GEN_INT_STAT1.
|
|
* None of the interrupts are time-critical so use the
|
|
* power-efficient queue.
|
|
*/
|
|
sdw_write_no_pm(peripheral, CS35L56_SDW_GEN_INT_MASK_1, 0);
|
|
sdw_read_no_pm(peripheral, CS35L56_SDW_GEN_INT_STAT_1);
|
|
sdw_write_no_pm(peripheral, CS35L56_SDW_GEN_INT_STAT_1, 0xFF);
|
|
queue_work(system_power_efficient_wq, &cs35l56->sdw_irq_work);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void cs35l56_sdw_irq_work(struct work_struct *work)
|
|
{
|
|
struct cs35l56_private *cs35l56 = container_of(work,
|
|
struct cs35l56_private,
|
|
sdw_irq_work);
|
|
|
|
cs35l56_irq(-1, &cs35l56->base);
|
|
|
|
/* unmask interrupts */
|
|
if (!cs35l56->sdw_irq_no_unmask)
|
|
sdw_write_no_pm(cs35l56->sdw_peripheral, CS35L56_SDW_GEN_INT_MASK_1,
|
|
CS35L56_SDW_INT_MASK_CODEC_IRQ);
|
|
|
|
pm_runtime_put_autosuspend(cs35l56->base.dev);
|
|
}
|
|
|
|
static int cs35l56_sdw_read_prop(struct sdw_slave *peripheral)
|
|
{
|
|
struct cs35l56_private *cs35l56 = dev_get_drvdata(&peripheral->dev);
|
|
struct sdw_slave_prop *prop = &peripheral->prop;
|
|
struct sdw_dpn_prop *ports;
|
|
|
|
ports = devm_kcalloc(cs35l56->base.dev, 2, sizeof(*ports), GFP_KERNEL);
|
|
if (!ports)
|
|
return -ENOMEM;
|
|
|
|
prop->source_ports = BIT(CS35L56_SDW1_CAPTURE_PORT);
|
|
prop->sink_ports = BIT(CS35L56_SDW1_PLAYBACK_PORT);
|
|
prop->paging_support = true;
|
|
prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY;
|
|
prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY | SDW_SCP_INT1_IMPL_DEF;
|
|
|
|
/* DP1 - playback */
|
|
ports[0].num = CS35L56_SDW1_PLAYBACK_PORT;
|
|
ports[0].type = SDW_DPN_FULL;
|
|
ports[0].ch_prep_timeout = 10;
|
|
prop->sink_dpn_prop = &ports[0];
|
|
|
|
/* DP3 - capture */
|
|
ports[1].num = CS35L56_SDW1_CAPTURE_PORT;
|
|
ports[1].type = SDW_DPN_FULL;
|
|
ports[1].ch_prep_timeout = 10;
|
|
prop->src_dpn_prop = &ports[1];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cs35l56_sdw_update_status(struct sdw_slave *peripheral,
|
|
enum sdw_slave_status status)
|
|
{
|
|
struct cs35l56_private *cs35l56 = dev_get_drvdata(&peripheral->dev);
|
|
|
|
switch (status) {
|
|
case SDW_SLAVE_ATTACHED:
|
|
dev_dbg(cs35l56->base.dev, "%s: ATTACHED\n", __func__);
|
|
if (cs35l56->sdw_attached)
|
|
break;
|
|
|
|
if (!cs35l56->base.init_done || cs35l56->soft_resetting)
|
|
cs35l56_sdw_init(peripheral);
|
|
|
|
cs35l56->sdw_attached = true;
|
|
break;
|
|
case SDW_SLAVE_UNATTACHED:
|
|
dev_dbg(cs35l56->base.dev, "%s: UNATTACHED\n", __func__);
|
|
cs35l56->sdw_attached = false;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cs35l63_sdw_kick_divider(struct cs35l56_private *cs35l56,
|
|
struct sdw_slave *peripheral)
|
|
{
|
|
unsigned int curr_scale_reg, next_scale_reg;
|
|
int curr_scale, next_scale, ret;
|
|
|
|
if (!cs35l56->base.init_done)
|
|
return 0;
|
|
|
|
if (peripheral->bus->params.curr_bank) {
|
|
curr_scale_reg = SDW_SCP_BUSCLOCK_SCALE_B1;
|
|
next_scale_reg = SDW_SCP_BUSCLOCK_SCALE_B0;
|
|
} else {
|
|
curr_scale_reg = SDW_SCP_BUSCLOCK_SCALE_B0;
|
|
next_scale_reg = SDW_SCP_BUSCLOCK_SCALE_B1;
|
|
}
|
|
|
|
/*
|
|
* Current clock scale value must be different to new value.
|
|
* Modify current to guarantee this. If next still has the dummy
|
|
* value we wrote when it was current, the core code has not set
|
|
* a new scale so restore its original good value
|
|
*/
|
|
curr_scale = sdw_read_no_pm(peripheral, curr_scale_reg);
|
|
if (curr_scale < 0) {
|
|
dev_err(cs35l56->base.dev, "Failed to read current clock scale: %d\n", curr_scale);
|
|
return curr_scale;
|
|
}
|
|
|
|
next_scale = sdw_read_no_pm(peripheral, next_scale_reg);
|
|
if (next_scale < 0) {
|
|
dev_err(cs35l56->base.dev, "Failed to read next clock scale: %d\n", next_scale);
|
|
return next_scale;
|
|
}
|
|
|
|
if (next_scale == CS35L56_SDW_INVALID_BUS_SCALE) {
|
|
next_scale = cs35l56->old_sdw_clock_scale;
|
|
ret = sdw_write_no_pm(peripheral, next_scale_reg, next_scale);
|
|
if (ret < 0) {
|
|
dev_err(cs35l56->base.dev, "Failed to modify current clock scale: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
cs35l56->old_sdw_clock_scale = curr_scale;
|
|
ret = sdw_write_no_pm(peripheral, curr_scale_reg, CS35L56_SDW_INVALID_BUS_SCALE);
|
|
if (ret < 0) {
|
|
dev_err(cs35l56->base.dev, "Failed to modify current clock scale: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
dev_dbg(cs35l56->base.dev, "Next bus scale: %#x\n", next_scale);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cs35l56_sdw_bus_config(struct sdw_slave *peripheral,
|
|
struct sdw_bus_params *params)
|
|
{
|
|
struct cs35l56_private *cs35l56 = dev_get_drvdata(&peripheral->dev);
|
|
|
|
if ((cs35l56->base.type == 0x63) && (cs35l56->base.rev < 0xa1))
|
|
return cs35l63_sdw_kick_divider(cs35l56, peripheral);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused cs35l56_sdw_clk_stop(struct sdw_slave *peripheral,
|
|
enum sdw_clk_stop_mode mode,
|
|
enum sdw_clk_stop_type type)
|
|
{
|
|
struct cs35l56_private *cs35l56 = dev_get_drvdata(&peripheral->dev);
|
|
|
|
dev_dbg(cs35l56->base.dev, "%s: mode:%d type:%d\n", __func__, mode, type);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct sdw_slave_ops cs35l56_sdw_ops = {
|
|
.read_prop = cs35l56_sdw_read_prop,
|
|
.interrupt_callback = cs35l56_sdw_interrupt,
|
|
.update_status = cs35l56_sdw_update_status,
|
|
.bus_config = cs35l56_sdw_bus_config,
|
|
#ifdef DEBUG
|
|
.clk_stop = cs35l56_sdw_clk_stop,
|
|
#endif
|
|
};
|
|
|
|
static int __maybe_unused cs35l56_sdw_handle_unattach(struct cs35l56_private *cs35l56)
|
|
{
|
|
struct sdw_slave *peripheral = cs35l56->sdw_peripheral;
|
|
|
|
if (peripheral->unattach_request) {
|
|
/* Cannot access registers until bus is re-initialized. */
|
|
dev_dbg(cs35l56->base.dev, "Wait for initialization_complete\n");
|
|
if (!wait_for_completion_timeout(&peripheral->initialization_complete,
|
|
msecs_to_jiffies(5000))) {
|
|
dev_err(cs35l56->base.dev, "initialization_complete timed out\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
peripheral->unattach_request = 0;
|
|
|
|
/*
|
|
* Don't call regcache_mark_dirty(), we can't be sure that the
|
|
* Manager really did issue a Bus Reset.
|
|
*/
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused cs35l56_sdw_runtime_suspend(struct device *dev)
|
|
{
|
|
struct cs35l56_private *cs35l56 = dev_get_drvdata(dev);
|
|
|
|
if (!cs35l56->base.init_done)
|
|
return 0;
|
|
|
|
return cs35l56_runtime_suspend_common(&cs35l56->base);
|
|
}
|
|
|
|
static int __maybe_unused cs35l56_sdw_runtime_resume(struct device *dev)
|
|
{
|
|
struct cs35l56_private *cs35l56 = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
dev_dbg(dev, "Runtime resume\n");
|
|
|
|
if (!cs35l56->base.init_done)
|
|
return 0;
|
|
|
|
ret = cs35l56_sdw_handle_unattach(cs35l56);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = cs35l56_runtime_resume_common(&cs35l56->base, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Re-enable SoundWire interrupts */
|
|
sdw_write_no_pm(cs35l56->sdw_peripheral, CS35L56_SDW_GEN_INT_MASK_1,
|
|
CS35L56_SDW_INT_MASK_CODEC_IRQ);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused cs35l56_sdw_system_suspend(struct device *dev)
|
|
{
|
|
struct cs35l56_private *cs35l56 = dev_get_drvdata(dev);
|
|
|
|
if (!cs35l56->base.init_done)
|
|
return 0;
|
|
|
|
/*
|
|
* Disable SoundWire interrupts.
|
|
* Flush - don't cancel because that could leave an unbalanced pm_runtime_get.
|
|
*/
|
|
cs35l56->sdw_irq_no_unmask = true;
|
|
flush_work(&cs35l56->sdw_irq_work);
|
|
|
|
/* Mask interrupts and flush in case sdw_irq_work was queued again */
|
|
sdw_write_no_pm(cs35l56->sdw_peripheral, CS35L56_SDW_GEN_INT_MASK_1, 0);
|
|
sdw_read_no_pm(cs35l56->sdw_peripheral, CS35L56_SDW_GEN_INT_STAT_1);
|
|
sdw_write_no_pm(cs35l56->sdw_peripheral, CS35L56_SDW_GEN_INT_STAT_1, 0xFF);
|
|
flush_work(&cs35l56->sdw_irq_work);
|
|
|
|
return cs35l56_system_suspend(dev);
|
|
}
|
|
|
|
static int __maybe_unused cs35l56_sdw_system_resume(struct device *dev)
|
|
{
|
|
struct cs35l56_private *cs35l56 = dev_get_drvdata(dev);
|
|
|
|
cs35l56->sdw_irq_no_unmask = false;
|
|
/* runtime_resume re-enables the interrupt */
|
|
|
|
return cs35l56_system_resume(dev);
|
|
}
|
|
|
|
static int cs35l56_sdw_probe(struct sdw_slave *peripheral, const struct sdw_device_id *id)
|
|
{
|
|
struct device *dev = &peripheral->dev;
|
|
struct cs35l56_private *cs35l56;
|
|
const struct regmap_config *regmap_config;
|
|
int ret;
|
|
|
|
cs35l56 = devm_kzalloc(dev, sizeof(*cs35l56), GFP_KERNEL);
|
|
if (!cs35l56)
|
|
return -ENOMEM;
|
|
|
|
cs35l56->base.dev = dev;
|
|
cs35l56->sdw_peripheral = peripheral;
|
|
cs35l56->sdw_link_num = peripheral->bus->link_id;
|
|
INIT_WORK(&cs35l56->sdw_irq_work, cs35l56_sdw_irq_work);
|
|
|
|
dev_set_drvdata(dev, cs35l56);
|
|
|
|
switch ((unsigned int)id->driver_data) {
|
|
case 0x3556:
|
|
case 0x3557:
|
|
regmap_config = &cs35l56_regmap_sdw;
|
|
cs35l56->base.fw_reg = &cs35l56_fw_reg;
|
|
break;
|
|
case 0x3563:
|
|
regmap_config = &cs35l63_regmap_sdw;
|
|
cs35l56->base.fw_reg = &cs35l63_fw_reg;
|
|
break;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
|
|
cs35l56->base.regmap = devm_regmap_init(dev, &cs35l56_regmap_bus_sdw,
|
|
peripheral, regmap_config);
|
|
if (IS_ERR(cs35l56->base.regmap)) {
|
|
ret = PTR_ERR(cs35l56->base.regmap);
|
|
return dev_err_probe(dev, ret, "Failed to allocate register map\n");
|
|
}
|
|
|
|
/* Start in cache-only until device is enumerated */
|
|
regcache_cache_only(cs35l56->base.regmap, true);
|
|
|
|
ret = cs35l56_common_probe(cs35l56);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cs35l56_sdw_remove(struct sdw_slave *peripheral)
|
|
{
|
|
struct cs35l56_private *cs35l56 = dev_get_drvdata(&peripheral->dev);
|
|
|
|
/* Disable SoundWire interrupts */
|
|
cs35l56->sdw_irq_no_unmask = true;
|
|
cancel_work_sync(&cs35l56->sdw_irq_work);
|
|
sdw_write_no_pm(peripheral, CS35L56_SDW_GEN_INT_MASK_1, 0);
|
|
sdw_read_no_pm(peripheral, CS35L56_SDW_GEN_INT_STAT_1);
|
|
sdw_write_no_pm(peripheral, CS35L56_SDW_GEN_INT_STAT_1, 0xFF);
|
|
|
|
cs35l56_remove(cs35l56);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops cs35l56_sdw_pm = {
|
|
SET_RUNTIME_PM_OPS(cs35l56_sdw_runtime_suspend, cs35l56_sdw_runtime_resume, NULL)
|
|
SYSTEM_SLEEP_PM_OPS(cs35l56_sdw_system_suspend, cs35l56_sdw_system_resume)
|
|
LATE_SYSTEM_SLEEP_PM_OPS(cs35l56_system_suspend_late, cs35l56_system_resume_early)
|
|
/* NOIRQ stage not needed, SoundWire doesn't use a hard IRQ */
|
|
};
|
|
|
|
static const struct sdw_device_id cs35l56_sdw_id[] = {
|
|
SDW_SLAVE_ENTRY(0x01FA, 0x3556, 0x3556),
|
|
SDW_SLAVE_ENTRY(0x01FA, 0x3557, 0x3557),
|
|
SDW_SLAVE_ENTRY(0x01FA, 0x3563, 0x3563),
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(sdw, cs35l56_sdw_id);
|
|
|
|
static struct sdw_driver cs35l56_sdw_driver = {
|
|
.driver = {
|
|
.name = "cs35l56",
|
|
.pm = pm_ptr(&cs35l56_sdw_pm),
|
|
},
|
|
.probe = cs35l56_sdw_probe,
|
|
.remove = cs35l56_sdw_remove,
|
|
.ops = &cs35l56_sdw_ops,
|
|
.id_table = cs35l56_sdw_id,
|
|
};
|
|
|
|
module_sdw_driver(cs35l56_sdw_driver);
|
|
|
|
MODULE_DESCRIPTION("ASoC CS35L56 SoundWire driver");
|
|
MODULE_IMPORT_NS("SND_SOC_CS35L56_CORE");
|
|
MODULE_IMPORT_NS("SND_SOC_CS35L56_SHARED");
|
|
MODULE_AUTHOR("Richard Fitzgerald <rf@opensource.cirrus.com>");
|
|
MODULE_AUTHOR("Simon Trimmer <simont@opensource.cirrus.com>");
|
|
MODULE_LICENSE("GPL");
|