2
0
mirror of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2025-09-04 20:19:47 +08:00
linux/drivers/irqchip/irq-riscv-imsic-early.c
Linus Torvalds 0f40464674 Updates for interrupt chip drivers:
- Support for hard indices on RISC-V. The hart index identifies a hart
     (core) within a specific interrupt domain in RISC-V's Priviledged
     Architecture.
 
   - Rework of the RISC-V MSI driver.
 
     This moves the driver over to the generic MSI library and solves the
     affinity problem of unmaskable PCI/MSI controllers. Unmaskable PCI/MSI
     controllers are prone to lose interrupts when the MSI message is
     updated to change the affinity because the message write consists of
     three 32-bit subsequent writes, which update address and data. As these
     writes are non-atomic versus the device raising an interrupt, the
     device can observe a half written update and issue an interrupt on the
     wrong vector. This is mitiated by a carefully orchestrated step by step
     update and the observation of an eventually pending interrupt on the
     CPU which issues the update. The algorithm follows the well established
     method of the X86 MSI driver.
 
   - A new driver for the RISC-V Sophgo SG2042 MSI controller
 
   - Overhaul of the Renesas RZQ2L driver.
 
     Simplification of the probe function by using devm_*() mechanisms,
     which avoid the endless list of error prone gotos in the failure paths.
 
   - Expand the Renesas RZV2H driver to support RZ/G3E SoCs
 
   - A workaround for Rockchip 3568002 erratum in the GIC-V3 driver to
     ensure that the addressing is limited to the lower 32-bit of the
     physical address space.
 
   - Add support for the Allwinner AS23 NMI controller
 
   - Expand the IMX irqsteer driver to handle up to 960 input interrupts
 
   - The usual small updates, cleanups and device tree changes.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmff454THHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoZqoD/4kdHzbxfLpf7vC3NnG8NWwTq5FpbSx
 6grQC9hWNMAs4n2IFjJRFLrjeX3AcdAQXL/BWuM0LfW9tQDQaVmqlSIlB/bn69KB
 7HyAR6ozbOgnHKGAqFUXSLf+4pq+6q3mOgGKIF289dy14HFu4ta0DqKgkPZeQnVs
 R/J8i7REUnn+YuxzSt5eOqyDPyt2EHJosSUABSWQZBlrM9jy1W7f6NqDFwawiVsa
 +tv4U/bz91vjzVxwTIgt7nJK+b2HVYdxoZYuKJwPaTsj26ANPp6ltjRTeOmZhb5h
 uKgw+OyzDnk6q+tjGcRqrqwl291VKxCvnRiqHFfu3CERdmI9qvpN9IRcEJqIbkcN
 cakekhAyt7OO7sEPcql5vBL97e9hpb7EcH78gYxwHf8Dy0rFZUvSC5v+L6VRFnJS
 XcKA1L+f9B6u5qxnBtLan9IW08HYNdvmPq6AuVjk+ndKioPUFqB2q6AtXpuA3Rmu
 Y3XH/wh/q5wk0pgeByxQW6swsfpMN3OYK3mpLx475wFh2NKzcdGlwGhDFhiw8DKX
 m1AESy3UZatj1a0qGaFS/M+mm9KGrDYIMrje832Wf4Yf1LGmTsDkd3/V99oazSsq
 Jm4qhDASXChJXd0imQICX9hPw0aHTlLYNs54obUXVULH4HivQKIgWhUXrjG0dBDL
 +tttjuv5FJxr3A==
 =jPHa
 -----END PGP SIGNATURE-----

Merge tag 'irq-drivers-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq driver updates from Thomas Gleixner:

 - Support for hard indices on RISC-V. The hart index identifies a hart
   (core) within a specific interrupt domain in RISC-V's Priviledged
   Architecture.

 - Rework of the RISC-V MSI driver

   This moves the driver over to the generic MSI library and solves the
   affinity problem of unmaskable PCI/MSI controllers. Unmaskable
   PCI/MSI controllers are prone to lose interrupts when the MSI message
   is updated to change the affinity because the message write consists
   of three 32-bit subsequent writes, which update address and data. As
   these writes are non-atomic versus the device raising an interrupt,
   the device can observe a half written update and issue an interrupt
   on the wrong vector. This is mitiated by a carefully orchestrated
   step by step update and the observation of an eventually pending
   interrupt on the CPU which issues the update. The algorithm follows
   the well established method of the X86 MSI driver.

 - A new driver for the RISC-V Sophgo SG2042 MSI controller

 - Overhaul of the Renesas RZQ2L driver

   Simplification of the probe function by using devm_*() mechanisms,
   which avoid the endless list of error prone gotos in the failure
   paths.

 - Expand the Renesas RZV2H driver to support RZ/G3E SoCs

 - A workaround for Rockchip 3568002 erratum in the GIC-V3 driver to
   ensure that the addressing is limited to the lower 32-bit of the
   physical address space.

 - Add support for the Allwinner AS23 NMI controller

 - Expand the IMX irqsteer driver to handle up to 960 input interrupts

 - The usual small updates, cleanups and device tree changes

* tag 'irq-drivers-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
  irqchip/imx-irqsteer: Support up to 960 input interrupts
  irqchip/sunxi-nmi: Support Allwinner A523 NMI controller
  dt-bindings: irq: sun7i-nmi: Document the Allwinner A523 NMI controller
  irqchip/davinci-cp-intc: Remove public header
  irqchip/renesas-rzv2h: Add RZ/G3E support
  irqchip/renesas-rzv2h: Update macros ICU_TSSR_TSSEL_{MASK,PREP}
  irqchip/renesas-rzv2h: Update TSSR_TIEN macro
  irqchip/renesas-rzv2h: Add field_width to struct rzv2h_hw_info
  irqchip/renesas-rzv2h: Add max_tssel to struct rzv2h_hw_info
  irqchip/renesas-rzv2h: Add struct rzv2h_hw_info with t_offs variable
  irqchip/renesas-rzv2h: Use devm_pm_runtime_enable()
  irqchip/renesas-rzv2h: Use devm_reset_control_get_exclusive_deasserted()
  irqchip/renesas-rzv2h: Simplify rzv2h_icu_init()
  irqchip/renesas-rzv2h: Drop irqchip from struct rzv2h_icu_priv
  irqchip/renesas-rzv2h: Fix wrong variable usage in rzv2h_tint_set_type()
  dt-bindings: interrupt-controller: renesas,rzv2h-icu: Document RZ/G3E SoC
  riscv: sophgo: dts: Add msi controller for SG2042
  irqchip: Add the Sophgo SG2042 MSI interrupt controller
  dt-bindings: interrupt-controller: Add Sophgo SG2042 MSI
  arm64: dts: rockchip: rk356x: Move PCIe MSI to use GIC ITS instead of MBI
  ...
2025-03-25 09:54:36 -07:00

268 lines
6.4 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2021 Western Digital Corporation or its affiliates.
* Copyright (C) 2022 Ventana Micro Systems Inc.
*/
#define pr_fmt(fmt) "riscv-imsic: " fmt
#include <linux/acpi.h>
#include <linux/cpu.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/irqchip/riscv-imsic.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/smp.h>
#include "irq-riscv-imsic-state.h"
static int imsic_parent_irq;
#ifdef CONFIG_SMP
static void imsic_ipi_send(unsigned int cpu)
{
struct imsic_local_config *local = per_cpu_ptr(imsic->global.local, cpu);
writel(IMSIC_IPI_ID, local->msi_va);
}
static void imsic_ipi_starting_cpu(void)
{
/* Enable IPIs for current CPU. */
__imsic_id_set_enable(IMSIC_IPI_ID);
}
static void imsic_ipi_dying_cpu(void)
{
/* Disable IPIs for current CPU. */
__imsic_id_clear_enable(IMSIC_IPI_ID);
}
static int __init imsic_ipi_domain_init(void)
{
int virq;
/* Create IMSIC IPI multiplexing */
virq = ipi_mux_create(IMSIC_NR_IPI, imsic_ipi_send);
if (virq <= 0)
return virq < 0 ? virq : -ENOMEM;
/* Set vIRQ range */
riscv_ipi_set_virq_range(virq, IMSIC_NR_IPI);
/* Announce that IMSIC is providing IPIs */
pr_info("%pfwP: providing IPIs using interrupt %d\n", imsic->fwnode, IMSIC_IPI_ID);
return 0;
}
#else
static void imsic_ipi_starting_cpu(void) { }
static void imsic_ipi_dying_cpu(void) { }
static int __init imsic_ipi_domain_init(void) { return 0; }
#endif
/*
* To handle an interrupt, we read the TOPEI CSR and write zero in one
* instruction. If TOPEI CSR is non-zero then we translate TOPEI.ID to
* Linux interrupt number and let Linux IRQ subsystem handle it.
*/
static void imsic_handle_irq(struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
int cpu = smp_processor_id();
struct imsic_vector *vec;
unsigned long local_id;
/*
* Process pending local synchronization instead of waiting
* for per-CPU local timer to expire.
*/
imsic_local_sync_all(false);
chained_irq_enter(chip, desc);
while ((local_id = csr_swap(CSR_TOPEI, 0))) {
local_id >>= TOPEI_ID_SHIFT;
if (local_id == IMSIC_IPI_ID) {
if (IS_ENABLED(CONFIG_SMP))
ipi_mux_process();
continue;
}
if (unlikely(!imsic->base_domain))
continue;
vec = imsic_vector_from_local_id(cpu, local_id);
if (!vec) {
pr_warn_ratelimited("vector not found for local ID 0x%lx\n", local_id);
continue;
}
generic_handle_irq(vec->irq);
}
chained_irq_exit(chip, desc);
}
static int imsic_starting_cpu(unsigned int cpu)
{
/* Mark per-CPU IMSIC state as online */
imsic_state_online();
/* Enable per-CPU parent interrupt */
enable_percpu_irq(imsic_parent_irq, irq_get_trigger_type(imsic_parent_irq));
/* Setup IPIs */
imsic_ipi_starting_cpu();
/*
* Interrupts identities might have been enabled/disabled while
* this CPU was not running so sync-up local enable/disable state.
*/
imsic_local_sync_all(true);
/* Enable local interrupt delivery */
imsic_local_delivery(true);
return 0;
}
static int imsic_dying_cpu(unsigned int cpu)
{
/* Cleanup IPIs */
imsic_ipi_dying_cpu();
/* Mark per-CPU IMSIC state as offline */
imsic_state_offline();
return 0;
}
static int __init imsic_early_probe(struct fwnode_handle *fwnode)
{
struct irq_domain *domain;
int rc;
/* Find parent domain and register chained handler */
domain = irq_find_matching_fwnode(riscv_get_intc_hwnode(), DOMAIN_BUS_ANY);
if (!domain) {
pr_err("%pfwP: Failed to find INTC domain\n", fwnode);
return -ENOENT;
}
imsic_parent_irq = irq_create_mapping(domain, RV_IRQ_EXT);
if (!imsic_parent_irq) {
pr_err("%pfwP: Failed to create INTC mapping\n", fwnode);
return -ENOENT;
}
/* Initialize IPI domain */
rc = imsic_ipi_domain_init();
if (rc) {
pr_err("%pfwP: Failed to initialize IPI domain\n", fwnode);
return rc;
}
/* Setup chained handler to the parent domain interrupt */
irq_set_chained_handler(imsic_parent_irq, imsic_handle_irq);
/*
* Setup cpuhp state (must be done after setting imsic_parent_irq)
*
* Don't disable per-CPU IMSIC file when CPU goes offline
* because this affects IPI and the masking/unmasking of
* virtual IPIs is done via generic IPI-Mux
*/
cpuhp_setup_state(CPUHP_AP_IRQ_RISCV_IMSIC_STARTING, "irqchip/riscv/imsic:starting",
imsic_starting_cpu, imsic_dying_cpu);
return 0;
}
static int __init imsic_early_dt_init(struct device_node *node, struct device_node *parent)
{
struct fwnode_handle *fwnode = &node->fwnode;
int rc;
/* Setup IMSIC state */
rc = imsic_setup_state(fwnode, NULL);
if (rc) {
pr_err("%pfwP: failed to setup state (error %d)\n", fwnode, rc);
return rc;
}
/* Do early setup of IPIs */
rc = imsic_early_probe(fwnode);
if (rc)
return rc;
/* Ensure that OF platform device gets probed */
of_node_clear_flag(node, OF_POPULATED);
return 0;
}
IRQCHIP_DECLARE(riscv_imsic, "riscv,imsics", imsic_early_dt_init);
#ifdef CONFIG_ACPI
static struct fwnode_handle *imsic_acpi_fwnode;
struct fwnode_handle *imsic_acpi_get_fwnode(struct device *dev)
{
return imsic_acpi_fwnode;
}
static int __init imsic_early_acpi_init(union acpi_subtable_headers *header,
const unsigned long end)
{
struct acpi_madt_imsic *imsic = (struct acpi_madt_imsic *)header;
int rc;
imsic_acpi_fwnode = irq_domain_alloc_named_fwnode("imsic");
if (!imsic_acpi_fwnode) {
pr_err("unable to allocate IMSIC FW node\n");
return -ENOMEM;
}
/* Setup IMSIC state */
rc = imsic_setup_state(imsic_acpi_fwnode, imsic);
if (rc) {
pr_err("%pfwP: failed to setup state (error %d)\n", imsic_acpi_fwnode, rc);
return rc;
}
/* Do early setup of IMSIC state and IPIs */
rc = imsic_early_probe(imsic_acpi_fwnode);
if (rc) {
irq_domain_free_fwnode(imsic_acpi_fwnode);
imsic_acpi_fwnode = NULL;
return rc;
}
rc = imsic_platform_acpi_probe(imsic_acpi_fwnode);
#ifdef CONFIG_PCI
if (!rc)
pci_msi_register_fwnode_provider(&imsic_acpi_get_fwnode);
#endif
if (rc)
pr_err("%pfwP: failed to register IMSIC for MSI functionality (error %d)\n",
imsic_acpi_fwnode, rc);
/*
* Even if imsic_platform_acpi_probe() fails, the IPI part of IMSIC can
* continue to work. So, no need to return failure. This is similar to
* DT where IPI works but MSI probe fails for some reason.
*/
return 0;
}
IRQCHIP_ACPI_DECLARE(riscv_imsic, ACPI_MADT_TYPE_IMSIC, NULL,
1, imsic_early_acpi_init);
#endif