mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-09-04 20:19:47 +08:00

GPIO core: - use more lock guards where applicable - refactor GPIO ACPI code and shrink it in the process by 8% - move GPIO ACPI quirks into a separate file - remove unneeded #ifdef - convert GPIO devres helpers to using devm_add_action() where applicable which shrinks and simplifies the code - refactor GPIO descriptor validation in GPIO consumer interfaces - don't allow setting values on input lines in the GPIO core which will take off the burden from GPIO drivers of checking this down the line - provide gpiod_is_equal() as a way of safely comparing two GPIO descriptors (the only current user is in regulator core) New drivers: - add the GPIO module for the max77759 multifunction device - add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller - add the GPIO driver for the Spacemit K1 SoC Driver improvements: - convert more drivers to using the new GPIO line value setter callbacks - convert more drivers to making the irq_chip immutable as is recommended by the interrupt subsystem - extend build testing coverage by enabling more modules to be built with COMPILE_TEST=y - extend the gpio-aggregator module with a configfs interface that makes the setup easier for user-space than the existing driver-level sysfs attributes and also adds more advanced configuration features (such as referring to aggregated lines by their original names or modifying their names as exposed by the aggregated chip) - add a missing mutex_destroy() in gpio-imx-scu - add an OF polarity quirk for s5m8767 - allow building gpio-vf610 as a loadable module - make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS interface disabled (another small step towards getting rid of the global GPIO numberspace) - add support for level-triggered interrupts to gpio-pca953x - don't double-check the ngpios property in gpio-ds4520 as GPIO core already does it - don't double-check the number of GPIOs in gpio-imx-scu as GPIO core already does it - remove unused callbacks from gpio-max3191x DT bindings: - add device-tree bindings for max77759, spacemit,k1 and blzp1600 (new drivers added this cycle) - document more properties for gpio-vf610 and gpio-tegra186 - document a new pca95xx variant - fix style of examples in several GPIO DT-binding documents Misc: - TODO list updates -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmg0NtQACgkQEacuoBRx 13Iolg/+P8fe1hTek+UgdKm/EAQ1Mn3oijNE1Ix15VD8Iqacu+URyB2SJMFcg27n S/tsuwogQeQmdgXPfYDJkQmiZEyln/ytWf5W2lNwYhGfGujVa8h1FueB7Wb8Zs7G PNMnobyAIGivodJfvikDEyczMuxhkOH04ZOT7UpTSPI47BSGsujX/1vgmRQLid1Z 3wFDJ0yDhVcuxit/VC+LzFpHIV0MiRzGpvHzYid5jjEaGSiRMpHixf27VJGc0gG1 IJLkhNkwZ3InisWVGvqdRg/FUNErRYKYQSARb4AjCU+/y1H0SWdB0R6sZDTZpP+e YqAc8FW31Lw1L7PWBLRTaVS3KT868tdXDCsArNzfBbb3u/WikO2GY/AXuzveZatp pHwyPA0JS9QvxaTXU9yjCpGqdNfjbrmU5OkZxTTe+Nyz84fUfiURiE8g4Rl6riy4 fNzaywRBmVZlEECWSWGzyNw9ZEYDRPZ1ZHmOA+8FWE+/XKJIsVf8w3x2QIC5b/HO hYKH4mar8oiEYJFZqoko3iQURJq+AD9wILCNpws5bSsi//VyyNT0mZV/q5hj7+Xx pqeEGDInvycN5fDWWJlkN1lj5dDyHZi4uus05mYI9Ec+eX3XNWRUHXUskbpzdgCs XepjP9kFQmMSL7y4z2d7tLd7gFup/uGny7o/KyMsIPDw7qVL5rY= =PQqp -----END PGP SIGNATURE----- Merge tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "We have three new drivers, some refactoring in the GPIO core, lots of various changes across many drivers, new configfs interface for the virtual gpio-aggregator module and DT-bindings updates. The treewide conversion of GPIO drivers to using the new value setter callbacks is ongoing with another round of GPIO drivers updated. You will also see these commits coming in from other subsystems as with the relevant changes merged into mainline last cycle, I've started converting GPIO providers located elsewhere than drivers/gpio/. GPIO core: - use more lock guards where applicable - refactor GPIO ACPI code and shrink it in the process by 8% - move GPIO ACPI quirks into a separate file - remove unneeded #ifdef - convert GPIO devres helpers to using devm_add_action() where applicable which shrinks and simplifies the code - refactor GPIO descriptor validation in GPIO consumer interfaces - don't allow setting values on input lines in the GPIO core which will take off the burden from GPIO drivers of checking this down the line - provide gpiod_is_equal() as a way of safely comparing two GPIO descriptors (the only current user is in regulator core) New drivers: - add the GPIO module for the max77759 multifunction device - add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller - add the GPIO driver for the Spacemit K1 SoC Driver improvements: - convert more drivers to using the new GPIO line value setter callbacks - convert more drivers to making the irq_chip immutable as is recommended by the interrupt subsystem - extend build testing coverage by enabling more modules to be built with COMPILE_TEST=y - extend the gpio-aggregator module with a configfs interface that makes the setup easier for user-space than the existing driver-level sysfs attributes and also adds more advanced configuration features (such as referring to aggregated lines by their original names or modifying their names as exposed by the aggregated chip) - add a missing mutex_destroy() in gpio-imx-scu - add an OF polarity quirk for s5m8767 - allow building gpio-vf610 as a loadable module - make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS interface disabled (another small step towards getting rid of the global GPIO numberspace) - add support for level-triggered interrupts to gpio-pca953x - don't double-check the ngpios property in gpio-ds4520 as GPIO core already does it - don't double-check the number of GPIOs in gpio-imx-scu as GPIO core already does it - remove unused callbacks from gpio-max3191x DT bindings: - add device-tree bindings for max77759, spacemit,k1 and blzp1600 (new drivers added this cycle) - document more properties for gpio-vf610 and gpio-tegra186 - document a new pca95xx variant - fix style of examples in several GPIO DT-binding documents Misc: - TODO list updates" * tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (123 commits) gpio: timberdale: select GPIOLIB_IRQCHIP gpio: lpc18xx: select GPIOLIB_IRQCHIP gpio: grgpio: select GPIOLIB_IRQCHIP gpio: bcm-kona: select GPIOLIB_IRQCHIP dt-bindings: gpio: vf610: add ngpios and gpio-reserved-ranges gpio: davinci: select GPIOLIB_IRQCHIP gpiolib-acpi: Update file references in the Documentation and MAINTAINERS gpiolib: acpi: Move quirks to a separate file gpiolib: acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter gpiolib: acpi: Handle deferred list via new API gpiolib: acpi: Make sure we fill struct acpi_gpio_info gpiolib: acpi: Switch to use enum in acpi_gpio_in_ignore_list() gpiolib: acpi: Use temporary variable for struct acpi_gpio_info gpiolib: remove unneeded #ifdef gpio: mpc8xxx: select GPIOLIB_IRQCHIP gpio: pxa: select GPIOLIB_IRQCHIP gpio: pxa: Make irq_chip immutable gpio: timberdale: Make irq_chip immutable gpio: xgene-sb: Make irq_chip immutable gpio: davinci: Make irq_chip immutable ...
472 lines
11 KiB
C
472 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Driver for Aeroflex Gaisler GRGPIO General Purpose I/O cores.
|
|
*
|
|
* 2013 (c) Aeroflex Gaisler AB
|
|
*
|
|
* This driver supports the GRGPIO GPIO core available in the GRLIB VHDL
|
|
* IP core library.
|
|
*
|
|
* Full documentation of the GRGPIO core can be found here:
|
|
* http://www.gaisler.com/products/grlib/grip.pdf
|
|
*
|
|
* See "Documentation/devicetree/bindings/gpio/gpio-grgpio.txt" for
|
|
* information on open firmware properties.
|
|
*
|
|
* Contributors: Andreas Larsson <andreas@gaisler.com>
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/string_choices.h>
|
|
|
|
#define GRGPIO_MAX_NGPIO 32
|
|
|
|
#define GRGPIO_DATA 0x00
|
|
#define GRGPIO_OUTPUT 0x04
|
|
#define GRGPIO_DIR 0x08
|
|
#define GRGPIO_IMASK 0x0c
|
|
#define GRGPIO_IPOL 0x10
|
|
#define GRGPIO_IEDGE 0x14
|
|
#define GRGPIO_BYPASS 0x18
|
|
#define GRGPIO_IMAP_BASE 0x20
|
|
|
|
/* Structure for an irq of the core - called an underlying irq */
|
|
struct grgpio_uirq {
|
|
u8 refcnt; /* Reference counter to manage requesting/freeing of uirq */
|
|
u8 uirq; /* Underlying irq of the gpio driver */
|
|
};
|
|
|
|
/*
|
|
* Structure for an irq of a gpio line handed out by this driver. The index is
|
|
* used to map to the corresponding underlying irq.
|
|
*/
|
|
struct grgpio_lirq {
|
|
s8 index; /* Index into struct grgpio_priv's uirqs, or -1 */
|
|
u8 irq; /* irq for the gpio line */
|
|
};
|
|
|
|
struct grgpio_priv {
|
|
struct gpio_chip gc;
|
|
void __iomem *regs;
|
|
struct device *dev;
|
|
|
|
u32 imask; /* irq mask shadow register */
|
|
|
|
/*
|
|
* The grgpio core can have multiple "underlying" irqs. The gpio lines
|
|
* can be mapped to any one or none of these underlying irqs
|
|
* independently of each other. This driver sets up an irq domain and
|
|
* hands out separate irqs to each gpio line
|
|
*/
|
|
struct irq_domain *domain;
|
|
|
|
/*
|
|
* This array contains information on each underlying irq, each
|
|
* irq of the grgpio core itself.
|
|
*/
|
|
struct grgpio_uirq uirqs[GRGPIO_MAX_NGPIO];
|
|
|
|
/*
|
|
* This array contains information for each gpio line on the irqs
|
|
* obtains from this driver. An index value of -1 for a certain gpio
|
|
* line indicates that the line has no irq. Otherwise the index connects
|
|
* the irq to the underlying irq by pointing into the uirqs array.
|
|
*/
|
|
struct grgpio_lirq lirqs[GRGPIO_MAX_NGPIO];
|
|
};
|
|
|
|
static void grgpio_set_imask(struct grgpio_priv *priv, unsigned int offset,
|
|
int val)
|
|
{
|
|
struct gpio_chip *gc = &priv->gc;
|
|
|
|
if (val)
|
|
priv->imask |= BIT(offset);
|
|
else
|
|
priv->imask &= ~BIT(offset);
|
|
gc->write_reg(priv->regs + GRGPIO_IMASK, priv->imask);
|
|
}
|
|
|
|
static int grgpio_to_irq(struct gpio_chip *gc, unsigned offset)
|
|
{
|
|
struct grgpio_priv *priv = gpiochip_get_data(gc);
|
|
|
|
if (offset >= gc->ngpio)
|
|
return -ENXIO;
|
|
|
|
if (priv->lirqs[offset].index < 0)
|
|
return -ENXIO;
|
|
|
|
return irq_create_mapping(priv->domain, offset);
|
|
}
|
|
|
|
/* -------------------- IRQ chip functions -------------------- */
|
|
|
|
static int grgpio_irq_set_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
struct grgpio_priv *priv = irq_data_get_irq_chip_data(d);
|
|
unsigned long flags;
|
|
u32 mask = BIT(d->hwirq);
|
|
u32 ipol;
|
|
u32 iedge;
|
|
u32 pol;
|
|
u32 edge;
|
|
|
|
switch (type) {
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
pol = 0;
|
|
edge = 0;
|
|
break;
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
pol = mask;
|
|
edge = 0;
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
pol = 0;
|
|
edge = mask;
|
|
break;
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
pol = mask;
|
|
edge = mask;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
raw_spin_lock_irqsave(&priv->gc.bgpio_lock, flags);
|
|
|
|
ipol = priv->gc.read_reg(priv->regs + GRGPIO_IPOL) & ~mask;
|
|
iedge = priv->gc.read_reg(priv->regs + GRGPIO_IEDGE) & ~mask;
|
|
|
|
priv->gc.write_reg(priv->regs + GRGPIO_IPOL, ipol | pol);
|
|
priv->gc.write_reg(priv->regs + GRGPIO_IEDGE, iedge | edge);
|
|
|
|
raw_spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void grgpio_irq_mask(struct irq_data *d)
|
|
{
|
|
struct grgpio_priv *priv = irq_data_get_irq_chip_data(d);
|
|
int offset = d->hwirq;
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&priv->gc.bgpio_lock, flags);
|
|
|
|
grgpio_set_imask(priv, offset, 0);
|
|
|
|
raw_spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
|
|
|
|
gpiochip_disable_irq(&priv->gc, d->hwirq);
|
|
}
|
|
|
|
static void grgpio_irq_unmask(struct irq_data *d)
|
|
{
|
|
struct grgpio_priv *priv = irq_data_get_irq_chip_data(d);
|
|
int offset = d->hwirq;
|
|
unsigned long flags;
|
|
|
|
gpiochip_enable_irq(&priv->gc, d->hwirq);
|
|
raw_spin_lock_irqsave(&priv->gc.bgpio_lock, flags);
|
|
|
|
grgpio_set_imask(priv, offset, 1);
|
|
|
|
raw_spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
|
|
}
|
|
|
|
static const struct irq_chip grgpio_irq_chip = {
|
|
.name = "grgpio",
|
|
.irq_mask = grgpio_irq_mask,
|
|
.irq_unmask = grgpio_irq_unmask,
|
|
.irq_set_type = grgpio_irq_set_type,
|
|
.flags = IRQCHIP_IMMUTABLE,
|
|
GPIOCHIP_IRQ_RESOURCE_HELPERS,
|
|
};
|
|
|
|
static irqreturn_t grgpio_irq_handler(int irq, void *dev)
|
|
{
|
|
struct grgpio_priv *priv = dev;
|
|
int ngpio = priv->gc.ngpio;
|
|
unsigned long flags;
|
|
int i;
|
|
int match = 0;
|
|
|
|
raw_spin_lock_irqsave(&priv->gc.bgpio_lock, flags);
|
|
|
|
/*
|
|
* For each gpio line, call its interrupt handler if it its underlying
|
|
* irq matches the current irq that is handled.
|
|
*/
|
|
for (i = 0; i < ngpio; i++) {
|
|
struct grgpio_lirq *lirq = &priv->lirqs[i];
|
|
|
|
if (priv->imask & BIT(i) && lirq->index >= 0 &&
|
|
priv->uirqs[lirq->index].uirq == irq) {
|
|
generic_handle_irq(lirq->irq);
|
|
match = 1;
|
|
}
|
|
}
|
|
|
|
raw_spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
|
|
|
|
if (!match)
|
|
dev_warn(priv->dev, "No gpio line matched irq %d\n", irq);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* This function will be called as a consequence of the call to
|
|
* irq_create_mapping in grgpio_to_irq
|
|
*/
|
|
static int grgpio_irq_map(struct irq_domain *d, unsigned int irq,
|
|
irq_hw_number_t hwirq)
|
|
{
|
|
struct grgpio_priv *priv = d->host_data;
|
|
struct grgpio_lirq *lirq;
|
|
struct grgpio_uirq *uirq;
|
|
unsigned long flags;
|
|
int offset = hwirq;
|
|
int ret = 0;
|
|
|
|
if (!priv)
|
|
return -EINVAL;
|
|
|
|
lirq = &priv->lirqs[offset];
|
|
if (lirq->index < 0)
|
|
return -EINVAL;
|
|
|
|
dev_dbg(priv->dev, "Mapping irq %d for gpio line %d\n",
|
|
irq, offset);
|
|
|
|
raw_spin_lock_irqsave(&priv->gc.bgpio_lock, flags);
|
|
|
|
/* Request underlying irq if not already requested */
|
|
lirq->irq = irq;
|
|
uirq = &priv->uirqs[lirq->index];
|
|
if (uirq->refcnt == 0) {
|
|
raw_spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
|
|
ret = request_irq(uirq->uirq, grgpio_irq_handler, 0,
|
|
dev_name(priv->dev), priv);
|
|
if (ret) {
|
|
dev_err(priv->dev,
|
|
"Could not request underlying irq %d\n",
|
|
uirq->uirq);
|
|
return ret;
|
|
}
|
|
raw_spin_lock_irqsave(&priv->gc.bgpio_lock, flags);
|
|
}
|
|
uirq->refcnt++;
|
|
|
|
raw_spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
|
|
|
|
/* Setup irq */
|
|
irq_set_chip_data(irq, priv);
|
|
irq_set_chip_and_handler(irq, &grgpio_irq_chip,
|
|
handle_simple_irq);
|
|
irq_set_noprobe(irq);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void grgpio_irq_unmap(struct irq_domain *d, unsigned int irq)
|
|
{
|
|
struct grgpio_priv *priv = d->host_data;
|
|
int index;
|
|
struct grgpio_lirq *lirq;
|
|
struct grgpio_uirq *uirq;
|
|
unsigned long flags;
|
|
int ngpio = priv->gc.ngpio;
|
|
int i;
|
|
|
|
irq_set_chip_and_handler(irq, NULL, NULL);
|
|
irq_set_chip_data(irq, NULL);
|
|
|
|
raw_spin_lock_irqsave(&priv->gc.bgpio_lock, flags);
|
|
|
|
/* Free underlying irq if last user unmapped */
|
|
index = -1;
|
|
for (i = 0; i < ngpio; i++) {
|
|
lirq = &priv->lirqs[i];
|
|
if (lirq->irq == irq) {
|
|
grgpio_set_imask(priv, i, 0);
|
|
lirq->irq = 0;
|
|
index = lirq->index;
|
|
break;
|
|
}
|
|
}
|
|
WARN_ON(index < 0);
|
|
|
|
if (index >= 0) {
|
|
uirq = &priv->uirqs[lirq->index];
|
|
uirq->refcnt--;
|
|
if (uirq->refcnt == 0) {
|
|
raw_spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
|
|
free_irq(uirq->uirq, priv);
|
|
return;
|
|
}
|
|
}
|
|
|
|
raw_spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
|
|
}
|
|
|
|
static void grgpio_irq_domain_remove(void *data)
|
|
{
|
|
struct irq_domain *domain = data;
|
|
|
|
irq_domain_remove(domain);
|
|
}
|
|
|
|
static const struct irq_domain_ops grgpio_irq_domain_ops = {
|
|
.map = grgpio_irq_map,
|
|
.unmap = grgpio_irq_unmap,
|
|
};
|
|
|
|
/* ------------------------------------------------------------ */
|
|
|
|
static int grgpio_probe(struct platform_device *ofdev)
|
|
{
|
|
struct device_node *np = ofdev->dev.of_node;
|
|
struct device *dev = &ofdev->dev;
|
|
void __iomem *regs;
|
|
struct gpio_chip *gc;
|
|
struct grgpio_priv *priv;
|
|
int err;
|
|
u32 prop;
|
|
s32 *irqmap;
|
|
int size;
|
|
int i;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
regs = devm_platform_ioremap_resource(ofdev, 0);
|
|
if (IS_ERR(regs))
|
|
return PTR_ERR(regs);
|
|
|
|
gc = &priv->gc;
|
|
err = bgpio_init(gc, dev, 4, regs + GRGPIO_DATA,
|
|
regs + GRGPIO_OUTPUT, NULL, regs + GRGPIO_DIR, NULL,
|
|
BGPIOF_BIG_ENDIAN_BYTE_ORDER);
|
|
if (err) {
|
|
dev_err(dev, "bgpio_init() failed\n");
|
|
return err;
|
|
}
|
|
|
|
priv->regs = regs;
|
|
priv->imask = gc->read_reg(regs + GRGPIO_IMASK);
|
|
priv->dev = dev;
|
|
|
|
gc->owner = THIS_MODULE;
|
|
gc->to_irq = grgpio_to_irq;
|
|
gc->label = devm_kasprintf(dev, GFP_KERNEL, "%pOF", np);
|
|
if (!gc->label)
|
|
return -ENOMEM;
|
|
|
|
gc->base = -1;
|
|
|
|
err = of_property_read_u32(np, "nbits", &prop);
|
|
if (err || prop <= 0 || prop > GRGPIO_MAX_NGPIO) {
|
|
gc->ngpio = GRGPIO_MAX_NGPIO;
|
|
dev_dbg(dev, "No or invalid nbits property: assume %d\n",
|
|
gc->ngpio);
|
|
} else {
|
|
gc->ngpio = prop;
|
|
}
|
|
|
|
/*
|
|
* The irqmap contains the index values indicating which underlying irq,
|
|
* if anyone, is connected to that line
|
|
*/
|
|
irqmap = (s32 *)of_get_property(np, "irqmap", &size);
|
|
if (irqmap) {
|
|
if (size < gc->ngpio) {
|
|
dev_err(dev,
|
|
"irqmap shorter than ngpio (%d < %d)\n",
|
|
size, gc->ngpio);
|
|
return -EINVAL;
|
|
}
|
|
|
|
priv->domain = irq_domain_create_linear(of_fwnode_handle(np), gc->ngpio,
|
|
&grgpio_irq_domain_ops,
|
|
priv);
|
|
if (!priv->domain) {
|
|
dev_err(dev, "Could not add irq domain\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
err = devm_add_action_or_reset(dev, grgpio_irq_domain_remove,
|
|
priv->domain);
|
|
if (err)
|
|
return err;
|
|
|
|
for (i = 0; i < gc->ngpio; i++) {
|
|
struct grgpio_lirq *lirq;
|
|
int ret;
|
|
|
|
lirq = &priv->lirqs[i];
|
|
lirq->index = irqmap[i];
|
|
|
|
if (lirq->index < 0)
|
|
continue;
|
|
|
|
ret = platform_get_irq(ofdev, lirq->index);
|
|
if (ret <= 0) {
|
|
/*
|
|
* Continue without irq functionality for that
|
|
* gpio line
|
|
*/
|
|
continue;
|
|
}
|
|
priv->uirqs[lirq->index].uirq = ret;
|
|
}
|
|
}
|
|
|
|
err = devm_gpiochip_add_data(dev, gc, priv);
|
|
if (err) {
|
|
dev_err(dev, "Could not add gpiochip\n");
|
|
return err;
|
|
}
|
|
|
|
dev_info(dev, "regs=0x%p, base=%d, ngpio=%d, irqs=%s\n",
|
|
priv->regs, gc->base, gc->ngpio, str_on_off(priv->domain));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id grgpio_match[] = {
|
|
{.name = "GAISLER_GPIO"},
|
|
{.name = "01_01a"},
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, grgpio_match);
|
|
|
|
static struct platform_driver grgpio_driver = {
|
|
.driver = {
|
|
.name = "grgpio",
|
|
.of_match_table = grgpio_match,
|
|
},
|
|
.probe = grgpio_probe,
|
|
};
|
|
module_platform_driver(grgpio_driver);
|
|
|
|
MODULE_AUTHOR("Aeroflex Gaisler AB.");
|
|
MODULE_DESCRIPTION("Driver for Aeroflex Gaisler GRGPIO");
|
|
MODULE_LICENSE("GPL");
|