mirror of
				git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
				synced 2025-09-04 20:19:47 +08:00 
			
		
		
		
	 94af1e732a
			
		
	
	
		94af1e732a
		
	
	
	
	
		
			
			The current datasheet URL is no longer valid. Replace with a valid one. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210603143447.2223353-3-festevam@gmail.com
		
			
				
	
	
		
			630 lines
		
	
	
		
			16 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			630 lines
		
	
	
		
			16 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-only
 | |
| /*
 | |
|  * An I2C driver for the Philips PCF8563 RTC
 | |
|  * Copyright 2005-06 Tower Technologies
 | |
|  *
 | |
|  * Author: Alessandro Zummo <a.zummo@towertech.it>
 | |
|  * Maintainers: http://www.nslu2-linux.org/
 | |
|  *
 | |
|  * based on the other drivers in this same directory.
 | |
|  *
 | |
|  * https://www.nxp.com/docs/en/data-sheet/PCF8563.pdf
 | |
|  */
 | |
| 
 | |
| #include <linux/clk-provider.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/bcd.h>
 | |
| #include <linux/rtc.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/of.h>
 | |
| #include <linux/err.h>
 | |
| 
 | |
| #define PCF8563_REG_ST1		0x00 /* status */
 | |
| #define PCF8563_REG_ST2		0x01
 | |
| #define PCF8563_BIT_AIE		BIT(1)
 | |
| #define PCF8563_BIT_AF		BIT(3)
 | |
| #define PCF8563_BITS_ST2_N	(7 << 5)
 | |
| 
 | |
| #define PCF8563_REG_SC		0x02 /* datetime */
 | |
| #define PCF8563_REG_MN		0x03
 | |
| #define PCF8563_REG_HR		0x04
 | |
| #define PCF8563_REG_DM		0x05
 | |
| #define PCF8563_REG_DW		0x06
 | |
| #define PCF8563_REG_MO		0x07
 | |
| #define PCF8563_REG_YR		0x08
 | |
| 
 | |
| #define PCF8563_REG_AMN		0x09 /* alarm */
 | |
| 
 | |
| #define PCF8563_REG_CLKO		0x0D /* clock out */
 | |
| #define PCF8563_REG_CLKO_FE		0x80 /* clock out enabled */
 | |
| #define PCF8563_REG_CLKO_F_MASK		0x03 /* frequenc mask */
 | |
| #define PCF8563_REG_CLKO_F_32768HZ	0x00
 | |
| #define PCF8563_REG_CLKO_F_1024HZ	0x01
 | |
| #define PCF8563_REG_CLKO_F_32HZ		0x02
 | |
| #define PCF8563_REG_CLKO_F_1HZ		0x03
 | |
| 
 | |
| #define PCF8563_REG_TMRC	0x0E /* timer control */
 | |
| #define PCF8563_TMRC_ENABLE	BIT(7)
 | |
| #define PCF8563_TMRC_4096	0
 | |
| #define PCF8563_TMRC_64		1
 | |
| #define PCF8563_TMRC_1		2
 | |
| #define PCF8563_TMRC_1_60	3
 | |
| #define PCF8563_TMRC_MASK	3
 | |
| 
 | |
| #define PCF8563_REG_TMR		0x0F /* timer */
 | |
| 
 | |
| #define PCF8563_SC_LV		0x80 /* low voltage */
 | |
| #define PCF8563_MO_C		0x80 /* century */
 | |
| 
 | |
| static struct i2c_driver pcf8563_driver;
 | |
| 
 | |
| struct pcf8563 {
 | |
| 	struct rtc_device *rtc;
 | |
| 	/*
 | |
| 	 * The meaning of MO_C bit varies by the chip type.
 | |
| 	 * From PCF8563 datasheet: this bit is toggled when the years
 | |
| 	 * register overflows from 99 to 00
 | |
| 	 *   0 indicates the century is 20xx
 | |
| 	 *   1 indicates the century is 19xx
 | |
| 	 * From RTC8564 datasheet: this bit indicates change of
 | |
| 	 * century. When the year digit data overflows from 99 to 00,
 | |
| 	 * this bit is set. By presetting it to 0 while still in the
 | |
| 	 * 20th century, it will be set in year 2000, ...
 | |
| 	 * There seems no reliable way to know how the system use this
 | |
| 	 * bit.  So let's do it heuristically, assuming we are live in
 | |
| 	 * 1970...2069.
 | |
| 	 */
 | |
| 	int c_polarity;	/* 0: MO_C=1 means 19xx, otherwise MO_C=1 means 20xx */
 | |
| 
 | |
| 	struct i2c_client *client;
 | |
| #ifdef CONFIG_COMMON_CLK
 | |
| 	struct clk_hw		clkout_hw;
 | |
| #endif
 | |
| };
 | |
| 
 | |
| static int pcf8563_read_block_data(struct i2c_client *client, unsigned char reg,
 | |
| 				   unsigned char length, unsigned char *buf)
 | |
| {
 | |
| 	struct i2c_msg msgs[] = {
 | |
| 		{/* setup read ptr */
 | |
| 			.addr = client->addr,
 | |
| 			.len = 1,
 | |
| 			.buf = ®,
 | |
| 		},
 | |
| 		{
 | |
| 			.addr = client->addr,
 | |
| 			.flags = I2C_M_RD,
 | |
| 			.len = length,
 | |
| 			.buf = buf
 | |
| 		},
 | |
| 	};
 | |
| 
 | |
| 	if ((i2c_transfer(client->adapter, msgs, 2)) != 2) {
 | |
| 		dev_err(&client->dev, "%s: read error\n", __func__);
 | |
| 		return -EIO;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int pcf8563_write_block_data(struct i2c_client *client,
 | |
| 				   unsigned char reg, unsigned char length,
 | |
| 				   unsigned char *buf)
 | |
| {
 | |
| 	int i, err;
 | |
| 
 | |
| 	for (i = 0; i < length; i++) {
 | |
| 		unsigned char data[2] = { reg + i, buf[i] };
 | |
| 
 | |
| 		err = i2c_master_send(client, data, sizeof(data));
 | |
| 		if (err != sizeof(data)) {
 | |
| 			dev_err(&client->dev,
 | |
| 				"%s: err=%d addr=%02x, data=%02x\n",
 | |
| 				__func__, err, data[0], data[1]);
 | |
| 			return -EIO;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int pcf8563_set_alarm_mode(struct i2c_client *client, bool on)
 | |
| {
 | |
| 	unsigned char buf;
 | |
| 	int err;
 | |
| 
 | |
| 	err = pcf8563_read_block_data(client, PCF8563_REG_ST2, 1, &buf);
 | |
| 	if (err < 0)
 | |
| 		return err;
 | |
| 
 | |
| 	if (on)
 | |
| 		buf |= PCF8563_BIT_AIE;
 | |
| 	else
 | |
| 		buf &= ~PCF8563_BIT_AIE;
 | |
| 
 | |
| 	buf &= ~(PCF8563_BIT_AF | PCF8563_BITS_ST2_N);
 | |
| 
 | |
| 	err = pcf8563_write_block_data(client, PCF8563_REG_ST2, 1, &buf);
 | |
| 	if (err < 0) {
 | |
| 		dev_err(&client->dev, "%s: write error\n", __func__);
 | |
| 		return -EIO;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int pcf8563_get_alarm_mode(struct i2c_client *client, unsigned char *en,
 | |
| 				  unsigned char *pen)
 | |
| {
 | |
| 	unsigned char buf;
 | |
| 	int err;
 | |
| 
 | |
| 	err = pcf8563_read_block_data(client, PCF8563_REG_ST2, 1, &buf);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 
 | |
| 	if (en)
 | |
| 		*en = !!(buf & PCF8563_BIT_AIE);
 | |
| 	if (pen)
 | |
| 		*pen = !!(buf & PCF8563_BIT_AF);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static irqreturn_t pcf8563_irq(int irq, void *dev_id)
 | |
| {
 | |
| 	struct pcf8563 *pcf8563 = i2c_get_clientdata(dev_id);
 | |
| 	int err;
 | |
| 	char pending;
 | |
| 
 | |
| 	err = pcf8563_get_alarm_mode(pcf8563->client, NULL, &pending);
 | |
| 	if (err)
 | |
| 		return IRQ_NONE;
 | |
| 
 | |
| 	if (pending) {
 | |
| 		rtc_update_irq(pcf8563->rtc, 1, RTC_IRQF | RTC_AF);
 | |
| 		pcf8563_set_alarm_mode(pcf8563->client, 1);
 | |
| 		return IRQ_HANDLED;
 | |
| 	}
 | |
| 
 | |
| 	return IRQ_NONE;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * In the routines that deal directly with the pcf8563 hardware, we use
 | |
|  * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
 | |
|  */
 | |
| static int pcf8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
 | |
| {
 | |
| 	struct i2c_client *client = to_i2c_client(dev);
 | |
| 	struct pcf8563 *pcf8563 = i2c_get_clientdata(client);
 | |
| 	unsigned char buf[9];
 | |
| 	int err;
 | |
| 
 | |
| 	err = pcf8563_read_block_data(client, PCF8563_REG_ST1, 9, buf);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 
 | |
| 	if (buf[PCF8563_REG_SC] & PCF8563_SC_LV) {
 | |
| 		dev_err(&client->dev,
 | |
| 			"low voltage detected, date/time is not reliable.\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	dev_dbg(&client->dev,
 | |
| 		"%s: raw data is st1=%02x, st2=%02x, sec=%02x, min=%02x, hr=%02x, "
 | |
| 		"mday=%02x, wday=%02x, mon=%02x, year=%02x\n",
 | |
| 		__func__,
 | |
| 		buf[0], buf[1], buf[2], buf[3],
 | |
| 		buf[4], buf[5], buf[6], buf[7],
 | |
| 		buf[8]);
 | |
| 
 | |
| 
 | |
| 	tm->tm_sec = bcd2bin(buf[PCF8563_REG_SC] & 0x7F);
 | |
| 	tm->tm_min = bcd2bin(buf[PCF8563_REG_MN] & 0x7F);
 | |
| 	tm->tm_hour = bcd2bin(buf[PCF8563_REG_HR] & 0x3F); /* rtc hr 0-23 */
 | |
| 	tm->tm_mday = bcd2bin(buf[PCF8563_REG_DM] & 0x3F);
 | |
| 	tm->tm_wday = buf[PCF8563_REG_DW] & 0x07;
 | |
| 	tm->tm_mon = bcd2bin(buf[PCF8563_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
 | |
| 	tm->tm_year = bcd2bin(buf[PCF8563_REG_YR]) + 100;
 | |
| 	/* detect the polarity heuristically. see note above. */
 | |
| 	pcf8563->c_polarity = (buf[PCF8563_REG_MO] & PCF8563_MO_C) ?
 | |
| 		(tm->tm_year >= 100) : (tm->tm_year < 100);
 | |
| 
 | |
| 	dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
 | |
| 		"mday=%d, mon=%d, year=%d, wday=%d\n",
 | |
| 		__func__,
 | |
| 		tm->tm_sec, tm->tm_min, tm->tm_hour,
 | |
| 		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int pcf8563_rtc_set_time(struct device *dev, struct rtc_time *tm)
 | |
| {
 | |
| 	struct i2c_client *client = to_i2c_client(dev);
 | |
| 	struct pcf8563 *pcf8563 = i2c_get_clientdata(client);
 | |
| 	unsigned char buf[9];
 | |
| 
 | |
| 	dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
 | |
| 		"mday=%d, mon=%d, year=%d, wday=%d\n",
 | |
| 		__func__,
 | |
| 		tm->tm_sec, tm->tm_min, tm->tm_hour,
 | |
| 		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
 | |
| 
 | |
| 	/* hours, minutes and seconds */
 | |
| 	buf[PCF8563_REG_SC] = bin2bcd(tm->tm_sec);
 | |
| 	buf[PCF8563_REG_MN] = bin2bcd(tm->tm_min);
 | |
| 	buf[PCF8563_REG_HR] = bin2bcd(tm->tm_hour);
 | |
| 
 | |
| 	buf[PCF8563_REG_DM] = bin2bcd(tm->tm_mday);
 | |
| 
 | |
| 	/* month, 1 - 12 */
 | |
| 	buf[PCF8563_REG_MO] = bin2bcd(tm->tm_mon + 1);
 | |
| 
 | |
| 	/* year and century */
 | |
| 	buf[PCF8563_REG_YR] = bin2bcd(tm->tm_year - 100);
 | |
| 	if (pcf8563->c_polarity ? (tm->tm_year >= 100) : (tm->tm_year < 100))
 | |
| 		buf[PCF8563_REG_MO] |= PCF8563_MO_C;
 | |
| 
 | |
| 	buf[PCF8563_REG_DW] = tm->tm_wday & 0x07;
 | |
| 
 | |
| 	return pcf8563_write_block_data(client, PCF8563_REG_SC,
 | |
| 				9 - PCF8563_REG_SC, buf + PCF8563_REG_SC);
 | |
| }
 | |
| 
 | |
| static int pcf8563_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 | |
| {
 | |
| 	struct i2c_client *client = to_i2c_client(dev);
 | |
| 	int ret;
 | |
| 
 | |
| 	switch (cmd) {
 | |
| 	case RTC_VL_READ:
 | |
| 		ret = i2c_smbus_read_byte_data(client, PCF8563_REG_SC);
 | |
| 		if (ret < 0)
 | |
| 			return ret;
 | |
| 
 | |
| 		return put_user(ret & PCF8563_SC_LV ? RTC_VL_DATA_INVALID : 0,
 | |
| 				(unsigned int __user *)arg);
 | |
| 	default:
 | |
| 		return -ENOIOCTLCMD;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int pcf8563_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *tm)
 | |
| {
 | |
| 	struct i2c_client *client = to_i2c_client(dev);
 | |
| 	unsigned char buf[4];
 | |
| 	int err;
 | |
| 
 | |
| 	err = pcf8563_read_block_data(client, PCF8563_REG_AMN, 4, buf);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 
 | |
| 	dev_dbg(&client->dev,
 | |
| 		"%s: raw data is min=%02x, hr=%02x, mday=%02x, wday=%02x\n",
 | |
| 		__func__, buf[0], buf[1], buf[2], buf[3]);
 | |
| 
 | |
| 	tm->time.tm_sec = 0;
 | |
| 	tm->time.tm_min = bcd2bin(buf[0] & 0x7F);
 | |
| 	tm->time.tm_hour = bcd2bin(buf[1] & 0x3F);
 | |
| 	tm->time.tm_mday = bcd2bin(buf[2] & 0x3F);
 | |
| 	tm->time.tm_wday = bcd2bin(buf[3] & 0x7);
 | |
| 
 | |
| 	err = pcf8563_get_alarm_mode(client, &tm->enabled, &tm->pending);
 | |
| 	if (err < 0)
 | |
| 		return err;
 | |
| 
 | |
| 	dev_dbg(&client->dev, "%s: tm is mins=%d, hours=%d, mday=%d, wday=%d,"
 | |
| 		" enabled=%d, pending=%d\n", __func__, tm->time.tm_min,
 | |
| 		tm->time.tm_hour, tm->time.tm_mday, tm->time.tm_wday,
 | |
| 		tm->enabled, tm->pending);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int pcf8563_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *tm)
 | |
| {
 | |
| 	struct i2c_client *client = to_i2c_client(dev);
 | |
| 	unsigned char buf[4];
 | |
| 	int err;
 | |
| 
 | |
| 	/* The alarm has no seconds, round up to nearest minute */
 | |
| 	if (tm->time.tm_sec) {
 | |
| 		time64_t alarm_time = rtc_tm_to_time64(&tm->time);
 | |
| 
 | |
| 		alarm_time += 60 - tm->time.tm_sec;
 | |
| 		rtc_time64_to_tm(alarm_time, &tm->time);
 | |
| 	}
 | |
| 
 | |
| 	dev_dbg(dev, "%s, min=%d hour=%d wday=%d mday=%d "
 | |
| 		"enabled=%d pending=%d\n", __func__,
 | |
| 		tm->time.tm_min, tm->time.tm_hour, tm->time.tm_wday,
 | |
| 		tm->time.tm_mday, tm->enabled, tm->pending);
 | |
| 
 | |
| 	buf[0] = bin2bcd(tm->time.tm_min);
 | |
| 	buf[1] = bin2bcd(tm->time.tm_hour);
 | |
| 	buf[2] = bin2bcd(tm->time.tm_mday);
 | |
| 	buf[3] = tm->time.tm_wday & 0x07;
 | |
| 
 | |
| 	err = pcf8563_write_block_data(client, PCF8563_REG_AMN, 4, buf);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 
 | |
| 	return pcf8563_set_alarm_mode(client, !!tm->enabled);
 | |
| }
 | |
| 
 | |
| static int pcf8563_irq_enable(struct device *dev, unsigned int enabled)
 | |
| {
 | |
| 	dev_dbg(dev, "%s: en=%d\n", __func__, enabled);
 | |
| 	return pcf8563_set_alarm_mode(to_i2c_client(dev), !!enabled);
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_COMMON_CLK
 | |
| /*
 | |
|  * Handling of the clkout
 | |
|  */
 | |
| 
 | |
| #define clkout_hw_to_pcf8563(_hw) container_of(_hw, struct pcf8563, clkout_hw)
 | |
| 
 | |
| static const int clkout_rates[] = {
 | |
| 	32768,
 | |
| 	1024,
 | |
| 	32,
 | |
| 	1,
 | |
| };
 | |
| 
 | |
| static unsigned long pcf8563_clkout_recalc_rate(struct clk_hw *hw,
 | |
| 						unsigned long parent_rate)
 | |
| {
 | |
| 	struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw);
 | |
| 	struct i2c_client *client = pcf8563->client;
 | |
| 	unsigned char buf;
 | |
| 	int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf);
 | |
| 
 | |
| 	if (ret < 0)
 | |
| 		return 0;
 | |
| 
 | |
| 	buf &= PCF8563_REG_CLKO_F_MASK;
 | |
| 	return clkout_rates[buf];
 | |
| }
 | |
| 
 | |
| static long pcf8563_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
 | |
| 				      unsigned long *prate)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
 | |
| 		if (clkout_rates[i] <= rate)
 | |
| 			return clkout_rates[i];
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int pcf8563_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
 | |
| 				   unsigned long parent_rate)
 | |
| {
 | |
| 	struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw);
 | |
| 	struct i2c_client *client = pcf8563->client;
 | |
| 	unsigned char buf;
 | |
| 	int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf);
 | |
| 	int i;
 | |
| 
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
 | |
| 		if (clkout_rates[i] == rate) {
 | |
| 			buf &= ~PCF8563_REG_CLKO_F_MASK;
 | |
| 			buf |= i;
 | |
| 			ret = pcf8563_write_block_data(client,
 | |
| 						       PCF8563_REG_CLKO, 1,
 | |
| 						       &buf);
 | |
| 			return ret;
 | |
| 		}
 | |
| 
 | |
| 	return -EINVAL;
 | |
| }
 | |
| 
 | |
| static int pcf8563_clkout_control(struct clk_hw *hw, bool enable)
 | |
| {
 | |
| 	struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw);
 | |
| 	struct i2c_client *client = pcf8563->client;
 | |
| 	unsigned char buf;
 | |
| 	int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf);
 | |
| 
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	if (enable)
 | |
| 		buf |= PCF8563_REG_CLKO_FE;
 | |
| 	else
 | |
| 		buf &= ~PCF8563_REG_CLKO_FE;
 | |
| 
 | |
| 	ret = pcf8563_write_block_data(client, PCF8563_REG_CLKO, 1, &buf);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int pcf8563_clkout_prepare(struct clk_hw *hw)
 | |
| {
 | |
| 	return pcf8563_clkout_control(hw, 1);
 | |
| }
 | |
| 
 | |
| static void pcf8563_clkout_unprepare(struct clk_hw *hw)
 | |
| {
 | |
| 	pcf8563_clkout_control(hw, 0);
 | |
| }
 | |
| 
 | |
| static int pcf8563_clkout_is_prepared(struct clk_hw *hw)
 | |
| {
 | |
| 	struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw);
 | |
| 	struct i2c_client *client = pcf8563->client;
 | |
| 	unsigned char buf;
 | |
| 	int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf);
 | |
| 
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	return !!(buf & PCF8563_REG_CLKO_FE);
 | |
| }
 | |
| 
 | |
| static const struct clk_ops pcf8563_clkout_ops = {
 | |
| 	.prepare = pcf8563_clkout_prepare,
 | |
| 	.unprepare = pcf8563_clkout_unprepare,
 | |
| 	.is_prepared = pcf8563_clkout_is_prepared,
 | |
| 	.recalc_rate = pcf8563_clkout_recalc_rate,
 | |
| 	.round_rate = pcf8563_clkout_round_rate,
 | |
| 	.set_rate = pcf8563_clkout_set_rate,
 | |
| };
 | |
| 
 | |
| static struct clk *pcf8563_clkout_register_clk(struct pcf8563 *pcf8563)
 | |
| {
 | |
| 	struct i2c_client *client = pcf8563->client;
 | |
| 	struct device_node *node = client->dev.of_node;
 | |
| 	struct clk *clk;
 | |
| 	struct clk_init_data init;
 | |
| 	int ret;
 | |
| 	unsigned char buf;
 | |
| 
 | |
| 	/* disable the clkout output */
 | |
| 	buf = 0;
 | |
| 	ret = pcf8563_write_block_data(client, PCF8563_REG_CLKO, 1, &buf);
 | |
| 	if (ret < 0)
 | |
| 		return ERR_PTR(ret);
 | |
| 
 | |
| 	init.name = "pcf8563-clkout";
 | |
| 	init.ops = &pcf8563_clkout_ops;
 | |
| 	init.flags = 0;
 | |
| 	init.parent_names = NULL;
 | |
| 	init.num_parents = 0;
 | |
| 	pcf8563->clkout_hw.init = &init;
 | |
| 
 | |
| 	/* optional override of the clockname */
 | |
| 	of_property_read_string(node, "clock-output-names", &init.name);
 | |
| 
 | |
| 	/* register the clock */
 | |
| 	clk = devm_clk_register(&client->dev, &pcf8563->clkout_hw);
 | |
| 
 | |
| 	if (!IS_ERR(clk))
 | |
| 		of_clk_add_provider(node, of_clk_src_simple_get, clk);
 | |
| 
 | |
| 	return clk;
 | |
| }
 | |
| #endif
 | |
| 
 | |
| static const struct rtc_class_ops pcf8563_rtc_ops = {
 | |
| 	.ioctl		= pcf8563_rtc_ioctl,
 | |
| 	.read_time	= pcf8563_rtc_read_time,
 | |
| 	.set_time	= pcf8563_rtc_set_time,
 | |
| 	.read_alarm	= pcf8563_rtc_read_alarm,
 | |
| 	.set_alarm	= pcf8563_rtc_set_alarm,
 | |
| 	.alarm_irq_enable = pcf8563_irq_enable,
 | |
| };
 | |
| 
 | |
| static int pcf8563_probe(struct i2c_client *client,
 | |
| 				const struct i2c_device_id *id)
 | |
| {
 | |
| 	struct pcf8563 *pcf8563;
 | |
| 	int err;
 | |
| 	unsigned char buf;
 | |
| 
 | |
| 	dev_dbg(&client->dev, "%s\n", __func__);
 | |
| 
 | |
| 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	pcf8563 = devm_kzalloc(&client->dev, sizeof(struct pcf8563),
 | |
| 				GFP_KERNEL);
 | |
| 	if (!pcf8563)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	i2c_set_clientdata(client, pcf8563);
 | |
| 	pcf8563->client = client;
 | |
| 	device_set_wakeup_capable(&client->dev, 1);
 | |
| 
 | |
| 	/* Set timer to lowest frequency to save power (ref Haoyu datasheet) */
 | |
| 	buf = PCF8563_TMRC_1_60;
 | |
| 	err = pcf8563_write_block_data(client, PCF8563_REG_TMRC, 1, &buf);
 | |
| 	if (err < 0) {
 | |
| 		dev_err(&client->dev, "%s: write error\n", __func__);
 | |
| 		return err;
 | |
| 	}
 | |
| 
 | |
| 	/* Clear flags and disable interrupts */
 | |
| 	buf = 0;
 | |
| 	err = pcf8563_write_block_data(client, PCF8563_REG_ST2, 1, &buf);
 | |
| 	if (err < 0) {
 | |
| 		dev_err(&client->dev, "%s: write error\n", __func__);
 | |
| 		return err;
 | |
| 	}
 | |
| 
 | |
| 	pcf8563->rtc = devm_rtc_allocate_device(&client->dev);
 | |
| 	if (IS_ERR(pcf8563->rtc))
 | |
| 		return PTR_ERR(pcf8563->rtc);
 | |
| 
 | |
| 	pcf8563->rtc->ops = &pcf8563_rtc_ops;
 | |
| 	/* the pcf8563 alarm only supports a minute accuracy */
 | |
| 	pcf8563->rtc->uie_unsupported = 1;
 | |
| 	pcf8563->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
 | |
| 	pcf8563->rtc->range_max = RTC_TIMESTAMP_END_2099;
 | |
| 	pcf8563->rtc->set_start_time = true;
 | |
| 
 | |
| 	if (client->irq > 0) {
 | |
| 		err = devm_request_threaded_irq(&client->dev, client->irq,
 | |
| 				NULL, pcf8563_irq,
 | |
| 				IRQF_SHARED | IRQF_ONESHOT | IRQF_TRIGGER_LOW,
 | |
| 				pcf8563_driver.driver.name, client);
 | |
| 		if (err) {
 | |
| 			dev_err(&client->dev, "unable to request IRQ %d\n",
 | |
| 								client->irq);
 | |
| 			return err;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	err = devm_rtc_register_device(pcf8563->rtc);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 
 | |
| #ifdef CONFIG_COMMON_CLK
 | |
| 	/* register clk in common clk framework */
 | |
| 	pcf8563_clkout_register_clk(pcf8563);
 | |
| #endif
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct i2c_device_id pcf8563_id[] = {
 | |
| 	{ "pcf8563", 0 },
 | |
| 	{ "rtc8564", 0 },
 | |
| 	{ "pca8565", 0 },
 | |
| 	{ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(i2c, pcf8563_id);
 | |
| 
 | |
| #ifdef CONFIG_OF
 | |
| static const struct of_device_id pcf8563_of_match[] = {
 | |
| 	{ .compatible = "nxp,pcf8563" },
 | |
| 	{ .compatible = "epson,rtc8564" },
 | |
| 	{ .compatible = "microcrystal,rv8564" },
 | |
| 	{ .compatible = "nxp,pca8565" },
 | |
| 	{}
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, pcf8563_of_match);
 | |
| #endif
 | |
| 
 | |
| static struct i2c_driver pcf8563_driver = {
 | |
| 	.driver		= {
 | |
| 		.name	= "rtc-pcf8563",
 | |
| 		.of_match_table = of_match_ptr(pcf8563_of_match),
 | |
| 	},
 | |
| 	.probe		= pcf8563_probe,
 | |
| 	.id_table	= pcf8563_id,
 | |
| };
 | |
| 
 | |
| module_i2c_driver(pcf8563_driver);
 | |
| 
 | |
| MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
 | |
| MODULE_DESCRIPTION("Philips PCF8563/Epson RTC8564 RTC driver");
 | |
| MODULE_LICENSE("GPL");
 |