Currently, ASID assignment for user VMs and page-table BO accounting for
client memory tracking are performed in xe_vm_create_ioctl.
To consolidate VM object initialization, move this logic to
xe_vm_create.
v2:
- removed unnecessary duplicate BO tracking code
- using the local variable xef to verify whether the VM is being created
by userspace
Fixes: 658a1c8e0a ("drm/xe: Assign ioctl xe file handler to vm in xe_vm_create")
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250811104358.2064150-3-piotr.piorkowski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit 30e0c3f43a414616e0b6ca76cf7f7b2cd387e1d4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo: Added fixes tag]
In several code paths, such as xe_pt_create(), the vm->xef field is used
to determine whether a VM originates from userspace or the kernel.
Previously, this handler was only assigned in xe_vm_create_ioctl(),
after the VM was created by xe_vm_create(). However, xe_vm_create()
triggers page table creation, and that function assumes vm->xef should
be already set. This could lead to incorrect origin detection.
To fix this problem and ensure consistency in the initialization of
the VM object, let's move the assignment of this handler to
xe_vm_create.
v2:
- take reference to the xe file object only when xef is not NULL
- release the reference to the xe file object on the error path (Matthew)
Fixes: 7f387e6012 ("drm/xe: add XE_BO_FLAG_PINNED_LATE_RESTORE")
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250811104358.2064150-2-piotr.piorkowski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit 9337166fa1d80f7bb7c7d3a8f901f21c348c0f2a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
CACHE_MODE_0 registers should be saved and restored as part of
the context, not during engine reset. Move the related workaround
(Disable Repacking for Compression) from rcs_engine_wa_init()
to icl_ctx_workarounds_init() for Jasper Lake and Elkhart
Lake platforms. This ensures the WA is applied during context
initialisation.
BSPEC: 11322
Fixes: 0ddae025ab ("drm/i915: Disable compression tricks on JSL")
Closes: Fixes: 0ddae025ab ("drm/i915: Disable compression tricks on JSL")
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Cc: stable@vger.kernel.org # v6.13+
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/4feaa24094e019e000ceb6011d8cd419b0361b3f.1754902406.git.sebastian.brzezinka@intel.com
(cherry picked from commit c9932f0d604e4c8f2c6018e598a322acb43c68a2)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Commit 8d9908e8fe ("drm/i915/display: remove small micro-optimizations
in irq handling") not only removed the optimizations, it also enabled
wakeref asserts for the GEN11_GU_MISC_IIR access. Silence the asserts by
wrapping the access inside intel_display_rpm_assert_{block,unblock}().
Reported-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Closes: https://lore.kernel.org/r/aG0tWkfmxWtxl_xc@zx2c4.com
Fixes: 8d9908e8fe ("drm/i915/display: remove small micro-optimizations in irq handling")
Cc: stable@vger.kernel.org # v6.13+
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250805115656.832235-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit cbd3baeffbc08052ce7dc53f11bf5524b4411056)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
On DCE 6, DP audio was not working. However, it worked when an
HDMI monitor was also plugged in.
Looking at dce_aud_wall_dto_setup it seems that the main
difference is that we use DTO1 when only DP is plugged in.
When programming DTO1, it uses audio_dto_source_clock_in_khz
which is set from get_dp_ref_freq_khz
The dce60_get_dp_ref_freq_khz implementation looks incorrect,
because DENTIST_DISPCLK_CNTL seems to be always zero on DCE 6,
so it isn't usable.
I compared dce60_get_dp_ref_freq_khz to the legacy display code,
specifically dce_v6_0_audio_set_dto, and it turns out that in
case of DCE 6, it needs to use the display clock. With that,
DP audio started working on Pitcairn, Oland and Cape Verde.
However, it still didn't work on Tahiti. Despite having the
same DCE version, Tahiti seems to have a different audio device.
After some trial and error I realized that it works with the
default display clock as reported by the VBIOS, not the current
display clock.
The patch was tested on all four SI GPUs:
* Pitcairn (DCE 6.0)
* Oland (DCE 6.4)
* Cape Verde (DCE 6.0)
* Tahiti (DCE 6.0 but different)
The testing was done on Samsung Odyssey G7 LS28BG700EPXEN on
each of the above GPUs, at the following settings:
* 4K 60 Hz
* 1080p 60 Hz
* 1080p 144 Hz
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 645cc7863da5de700547d236697dffd6760cf051)
Cc: stable@vger.kernel.org
For later VBIOS versions, the fractional feedback divider is
calculated as the remainder of dividing the feedback divider by
a factor, which is set to 1000000. For reference, see:
- calculate_fb_and_fractional_fb_divider
- calc_pll_max_vco_construct
However, in case of old VBIOS versions that have
set_pixel_clock_v3, they only have 1 byte available for the
fractional feedback divider, and it's expected to be set to the
remainder from dividing the feedback divider by 10.
For reference see the legacy display code:
- amdgpu_pll_compute
- amdgpu_atombios_crtc_program_pll
This commit fixes set_pixel_clock_v3 by dividing the fractional
feedback divider passed to the function by 100000.
Fixes: 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 027e7acc7e17802ebf28e1edb88a404836ad50d6)
Cc: stable@vger.kernel.org
When getting the number of connectors, the VBIOS reports
the number of valid indices, but it doesn't say which indices
are valid, and not every valid index has an actual connector.
If we don't find a connector on an index, that is not an error.
Considering these are not actual errors, don't litter the logs.
Fixes: 60df562814 ("drm/amd/display: handle invalid connector indices")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 249d4bc5f1935f04bb45b3b63c0f8922565124f7)
On some GPUs the VBIOS just doesn't have encoder caps,
or maybe not for every encoder.
This isn't really a problem and it's handled well,
so let's not litter the logs with it.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 33e0227ee96e62d034781e91f215e32fd0b1d512)
Also needed by DCE 6.
This way the code that gathers this info can be shared between
different DCE versions and doesn't have to be repeated.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8107432dff37db26fcb641b6cebeae8981cd73a0)
Cc: stable@vger.kernel.org
dce110_fill_display_configs is shared between DCE 6-11, and
finding the first CRTC and its line time is relevant to DCE 6 too.
Move the code to find it from DCE 11 specific code.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4ab09785f8d5d03df052827af073d5c508ff5f63)
Cc: stable@vger.kernel.org
Adjust the nominal (and performance) clocks for DCE 8-10,
and set them to 625 MHz, which is the value used by the legacy
display code in amdgpu_atombios_get_clock_info.
This was tested with Hawaii, Tonga and Fiji.
These GPUs can output 4K 60Hz (10-bit depth) at 625 MHz.
The extra 15% clock was added as a workaround for a Polaris issue
which uses DCE 11, and should not have been used on DCE 8-10 which
are already hardcoded to the highest possible display clock.
Unfortunately, the extra 15% was mistakenly copied and kept
even on code paths which don't affect Polaris.
This commit fixes that and also adds a check to make sure
not to exceed the maximum DCE 8-10 display clock.
Fixes: 8cd61c313d ("drm/amd/display: Raise dispclk value for Polaris")
Fixes: dc88b4a684 ("drm/amd/display: make clk mgr soc specific")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1ae45b5d4f371af8ae51a3827d0ec9fe27eeb867)
The extra 15% clock was added as a workaround for a Polaris issue
which uses DCE 11, and should not have been used on DCE 6 which
is already hardcoded to the highest possible display clock.
Unfortunately, the extra 15% was mistakenly copied and kept
even on code paths which don't affect Polaris.
This commit fixes that and also adds a check to make sure
not to exceed the maximum DCE 6 display clock.
Fixes: 8cd61c313d ("drm/amd/display: Raise dispclk value for Polaris")
Fixes: dc88b4a684 ("drm/amd/display: make clk mgr soc specific")
Fixes: 3ecb3b794e ("drm/amd/display: dc/clk_mgr: add support for SI parts (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 427980c1cbd22bb256b9385f5ce73c0937562408)
Cc: stable@vger.kernel.org
The function mod_hdcp_hdcp1_create_session() calls the function
get_first_active_display(), but does not check its return value.
The return value is a null pointer if the display list is empty.
This will lead to a null pointer dereference.
Add a null pointer check for get_first_active_display() and return
MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null.
This is similar to the commit c3e9826a22
("drm/amd/display: Add null pointer check for get_first_active_display()").
Fixes: 2deade5ede ("drm/amd/display: Remove hdcp display state with mst fix")
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5e43eb3cd731649c4f8b9134f857be62a416c893)
[WHY & HOW]
IPS & self-fresh feature can cause vblank counter resets between
vblank disable and enable.
It may cause system stuck due to wait the vblank counter.
Call the drm_crtc_vblank_restore() during vblank enable to estimate
missed vblanks by using timestamps and update the vblank counter in
DRM.
It can make the vblank counter increase smoothly and resolve this issue.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 34d66bc7ff10e146a4cec76cf286979740a10954)
Cc: stable@vger.kernel.org
[WHY]
Although unlikely drm_atomic_get_new_connector_state() or
drm_atomic_get_old_connector_state() can return NULL.
[HOW]
Check returns before dereference.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1e5e8d672fec9f2ab352be121be971877bff2af9)
Cc: stable@vger.kernel.org
Take into account the limits from the vbios. Ported
from the SMU13 code.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4352
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 203cc7f1dd86f2c8de5c3c6182f19adac7c9c206)
Cc: stable@vger.kernel.org
This reverts commits:
commit 1f26214d26 ("drm/amd/display: Add HPO encoder support to Replay")
commit 3bfce48b10 ("drm/amd/display: Add support for Panel Replay on DP1 eDP (panel_inst=1)")
due to visual confirm issue.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 92f68f6a1b297633159a3f3759e4dfc7e5b58abb)
The BIOS can leave the AUX power well enabled on an output, even if this
isn't required (on platforms where the AUX power is only needed for an
AUX access). This was observed at least on PTL. To avoid the WARN which
would be triggered by this during the HW readout, convert the WARN to a
debug message.
Cc: stable@vger.kernel.org # v6.8+
Reported-by: Charlton Lin <charlton.lin@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250811080152.906216-6-imre.deak@intel.com
(cherry picked from commit 6cb52cba474b2bec1a3018d3dbf75292059a29a1)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Use the cached max lane count value on LNL+, to account for scenarios
where this value is queried after the HW cleared the corresponding pin
assignment value in the TCSS_DDI_STATUS register after the sink got
disconnected.
For consistency, follow-up changes will use the cached max lane count
value on other platforms as well and will also cache the pin assignment
value in a similar way.
Cc: stable@vger.kernel.org # v6.8+
Reported-by: Charlton Lin <charlton.lin@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250811080152.906216-5-imre.deak@intel.com
(cherry picked from commit afc4e84388079f4d5ba05271632b7a4d8d85165c)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
On LNL+ for a disconnected sink the pin assignment value gets cleared by
the HW/FW as soon as the sink gets disconnected, even if the PHY
ownership got acquired already by the BIOS/driver (and hence the PHY
itself is still connected and used by the display). During HW readout
this can result in detecting the PHY's max lane count as 0 - matching
the above cleared aka NONE pin assignment HW state. For a connected PHY
the driver in general (outside of intel_tc.c) expects the max lane count
value to be valid for the video mode enabled on the corresponding output
(1, 2 or 4). Ensure this by setting the max lane count to 4 in this
case. Note, that it doesn't matter if this lane count happened to be
more than the max lane count with which the PHY got connected and
enabled, since the only thing the driver can do with such an output -
where the DP-alt sink is disconnected - is to disable the output.
v2: Rebased on change reading out the pin configuration only if the PHY
is connected.
Cc: stable@vger.kernel.org # v6.8+
Reported-by: Charlton Lin <charlton.lin@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250811080152.906216-4-imre.deak@intel.com
(cherry picked from commit 33cf70bc0fe760224f892bc1854a33665f27d482)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
The PHY's pin assignment value in the TCSS_DDI_STATUS register - as set
by the HW/FW based on the connected DP-alt sink's TypeC/PD pin
assignment negotiation - gets cleared by the HW/FW on LNL+ as soon as
the sink gets disconnected, even if the PHY ownership got acquired
already by the driver (and hence the PHY itself is still connected and
used by the display). This is similar to how the PHY Ready flag gets
cleared on LNL+ in the same register.
To be able to query the max lane count value on LNL+ - which is based on
the above pin assignment - at all times even after the sink gets
disconnected, the max lane count must be determined and cached during
the PHY's HW readout and connect sequences. Do that here, leaving the
actual use of the cached value to a follow-up change.
v2: Don't read out the pin configuration if the PHY is disconnected.
Cc: stable@vger.kernel.org # v6.8+
Reported-by: Charlton Lin <charlton.lin@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250811080152.906216-3-imre.deak@intel.com
(cherry picked from commit 3e32438fc406761f81b1928d210b3d2a5e7501a0)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
The TypeC PHY HW readout during driver loading and system resume
determines which TypeC mode the PHY is in (legacy/DP-alt/TBT-alt) and
whether the PHY is connected, based on the PHY's Owned and Ready flags.
For the PHY to be in DP-alt or legacy mode and for the PHY to be in the
connected state in these modes, both the Owned (set by the BIOS/driver)
and the Ready (set by the HW) flags should be set.
On ICL-MTL the HW kept the PHY's Ready flag set after the driver
connected the PHY by acquiring the PHY ownership (by setting the Owned
flag), until the driver disconnected the PHY by releasing the PHY
ownership (by clearing the Owned flag). On LNL+ this has changed, in
that the HW clears the Ready flag as soon as the sink gets disconnected,
even if the PHY ownership was acquired already and hence the PHY is
being used by the display.
When inheriting the HW state from BIOS for a PHY connected in DP-alt
mode on which the sink got disconnected - i.e. in a case where the sink
was connected while BIOS/GOP was running and so the sink got enabled
connecting the PHY, but the user disconnected the sink by the time the
driver loaded - the PHY Owned but not Ready state must be accounted for
on LNL+ according to the above. Do that by assuming on LNL+ that the PHY
is connected in DP-alt mode whenever the PHY Owned flag is set,
regardless of the PHY Ready flag.
This fixes a problem on LNL+, where the PHY TypeC mode / connected state
was detected incorrectly for a DP-alt sink, which got connected and then
disconnected by the user in the above way.
v2: Rename tc_phy_in_legacy_or_dp_alt_mode() to tc_phy_owned_by_display().
(Luca, Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org # v6.8+
Reported-by: Charlton Lin <charlton.lin@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
[Imre: Add one-liner function documentation for tc_phy_owned_by_display()]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250811080152.906216-2-imre.deak@intel.com
(cherry picked from commit 89f4b196ee4b056e0e8c179b247b29d4a71a4e7e)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
If VGA and DP connected together, there will be only one can get crtc.
Add encoder possible_clones to support two connectors enable.
Fixes: 3c7623fb5b ("drm/hisilicon/hibmc: Enable this hot plug detect of irq feature")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250813094238.3722345-8-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
In some case, the dp link training success at 8.1Gbps, but the sink's
maximum supported rate is less than 8.1G. So change the default 8.1Gbps
link rate to the rate that reads from devices' capabilities.
Fixes: 54063d86e0 ("drm/hisilicon/hibmc: add dp link moduel in hibmc drivers")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250813094238.3722345-6-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
When hibmc loaded failed, the driver use hibmc_unload to free the
resource, but the mutexes in mode.config are not init, which will
access an NULL pointer. Just change goto statement to return, because
hibnc_hw_init() doesn't need to free anything.
Fixes: b3df5e65cc ("drm/hibmc: Drop drm_vblank_cleanup")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250813094238.3722345-5-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The local variable is passed in request_irq (), and there will be use
after free problem, which will make request_irq failed. Using the global
irq name instead of it to fix.
Fixes: b11bc1ae46 ("drm/hisilicon/hibmc: Add MSI irq getting and requesting for HPD")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250813094238.3722345-4-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Currently the driver missed to clean the i2c adapter when vdac init failed.
It may cause resource leak.
Fixes: a0d078d06e ("drm/hisilicon: Features to support reading resolutions from EDID")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250813094238.3722345-2-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Commit fde578c862 ("rust: alloc: replace aligned_size() with
Kmalloc::aligned_layout()") provides a public `aligned_layout` function
in `Kamlloc`, but not in `Cmalloc`, and thus uses of it will trigger an
error in `rusttest`.
Such a user appeared in the following commit 22ab0641b9 ("rust: drm:
ensure kmalloc() compatible Layout"):
error[E0599]: no function or associated item named `aligned_layout` found for struct `alloc::allocator_test::Cmalloc` in the current scope
--> rust/kernel/drm/device.rs💯31
|
100 | let layout = Kmalloc::aligned_layout(Layout:🆕:<Self>());
| ^^^^^^^^^^^^^^ function or associated item not found in `Cmalloc`
|
::: rust/kernel/alloc/allocator_test.rs:19:1
|
19 | pub struct Cmalloc;
| ------------------ function or associated item `aligned_layout` not found for this struct
Thus add an equivalent one for `Cmalloc`.
Fixes: fde578c862 ("rust: alloc: replace aligned_size() with Kmalloc::aligned_layout()")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250816204215.2719559-1-ojeda@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Use kvfree() to fix the following Coccinelle/coccicheck warning reported
by kfree_mismatch.cocci:
WARNING kvmalloc is used to allocate this memory at line 10398
Fixes: f728c17fc9 ("accel/habanalabs/gaudi2: move HMMU page tables to device memory")
Reported-by: Qianfeng Rong <rongqianfeng@vivo.com>
Closes: https://patch.msgid.link/20250808085530.233737-1-rongqianfeng@vivo.com
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
[lukas: acknowledge Qianfeng, adjust Thorsten's domain, add Fixes tag]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Cc: stable@vger.kernel.org # v6.9+
Link: https://patch.msgid.link/20240820231028.136126-1-thorsten.blum@toblux.com
I will be leaving Intel soon, Koby Elbaz & Konstantin Sinyuk will take
the role of habanalabs driver maintainers.
Signed-off-by: Yaron Avizrat <yaron.avizrat@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Reviewed-by: Konstantin Sinyuk <konstantin.sinyuk@intel.com>
Link: https://patch.msgid.link/DM4PR11MB55491ACAA33DF29CEF3C67DAE935A@DM4PR11MB5549.namprd11.prod.outlook.com
[lukas: wrap to 72 chars]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
In 32-bit arm, the build fails with:
error[E0308]: mismatched types
--> drivers/gpu/drm/nova/file.rs:42:28
|
42 | getparam.set_value(value);
| --------- ^^^^^ expected `u64`, found `u32`
| |
| arguments to this method are incorrect
|
note: method defined here
--> drivers/gpu/drm/nova/uapi.rs:29:12
|
29 | pub fn set_value(&self, v: u64) {
| ^^^^^^^^^ ------
help: you can convert a `u32` to a `u64`
|
42 | getparam.set_value(value.into());
| +++++++
The reason is that `Getparam::set_value` takes a `u64` (from the UAPI),
but `pci::Device::resource_len()` returns a `resource_size_t`, which is a
`phys_addr_t`, which may be 32- or 64-bit.
Thus add an `into()` call to support the 32-bit case, while allowing the
Clippy lint that complains in the 64-bit case where the type is the same.
Fixes: cdeaeb9dd7 ("drm: nova-drm: add initial driver skeleton")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Link: https://lore.kernel.org/r/20250724165441.2105632-1-ojeda@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Replace kfree() with kvfree() for memory allocated by kvmalloc().
Compile-tested only.
Cc: stable@vger.kernel.org
Fixes: 8a8b1ec526 ("drm/nouveau/gsp: split rpc handling out on its own")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Acked-by: Zhi Wang <zhiw@nvidia.com>
Link: https://lore.kernel.org/r/20250813125412.96178-1-rongqianfeng@vivo.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
devm_drm_bridge_alloc() returns ERR_PTR on failure instead of a
NULL pointer, so use IS_ERR() to check the returned pointer.
While at it, on failure, return ERR_CAST(dp) instead of
ERR_PTR(-ENOMEM) in order not to depend on devm_drm_bridge_alloc()
error code implementation.
Fixes: 48f05c3b4b ("drm/bridge: analogix_dp: Use devm_drm_bridge_alloc() API")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20250806095224.527938-1-victor.liu@nxp.com
Make video port registers nonvolatile. As DSP_CTRL register is written
to twice due to gamma LUT enable bit which is set outside of the main
DSP_CTRL initialization within atomic_enable (for rk356x case it is also
necessary to always disable gamma LUT before writing a new LUT) there is
a chance that DSP_CTRL value read-out in gamma LUT init/update code is
not the one which was written by the preceding DSP_CTRL initialization
code within atomic_enable. This might result in misconfigured DSP_CTRL
which leads to no visual output[1]. Since DSP_CTRL write takes effect
after VSYNC[1] the issue is not always present. When tested on Pinetab2
with kernel 6.14 it happenes only when DRM is compiled as a module[1].
In order to confirm that it is a timing issue I inserted 18ms udelay
before vop2_crtc_atomic_try_set_gamma in atomic enable and compiled DRM
as module - this has also fixed the issue.
[1] https://lore.kernel.org/linux-rockchip/562b38e5.a496.1975f09f983.Coremail.andyshrk@163.com/
Reported-by: Diederik de Haas <didi.debian@cknow.org>
Closes: https://lore.kernel.org/linux-rockchip/DAEVDSTMWI1E.J454VZN0R9MA@cknow.org/
Suggested-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Piotr Zalewski <pZ010001011111@proton.me>
Tested-by: Diederik de Haas <didi.debian@cknow.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250706083629.140332-2-pZ010001011111@proton.me
This reverts commit 515986100d.
The dma_buf field in struct drm_gem_object is not stable over the
object instance's lifetime. The field becomes NULL when user space
releases the final GEM handle on the buffer object. This resulted
in a NULL-pointer deref.
Workarounds in commit 5307dce878 ("drm/gem: Acquire references on
GEM handles for framebuffers") and commit f6bfc9afc7 ("drm/framebuffer:
Acquire internal references on GEM handles") only solved the problem
partially. They especially don't work for buffer objects without a DRM
framebuffer associated.
Hence, this revert to going back to using .import_attach->dmabuf.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250715082635.34974-1-tzimmermann@suse.de
In drm_dev_put() call in AlwaysRefCounted::dec_ref() we rely on struct
drm_device to be the first field in drm::Device, whereas everywhere
else we correctly obtain the address of the actual struct drm_device.
Analogous to the from_drm_device() helper, provide the
into_drm_device() helper in order to address this.
Fixes: 1e4b8896c0 ("rust: drm: add device abstraction")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250731154919.4132-5-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The #[pin_data] and #[pin] annotations are not necessary for
drm::Device, since we don't use any pin-init macros, but only
__pinned_init() on the impl PinInit<T::Data, Error> argument of
drm::Device::new().
Fixes: 1e4b8896c0 ("rust: drm: add device abstraction")
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250731154919.4132-4-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
drm::Device is allocated through __drm_dev_alloc() (which uses
kmalloc()) and the driver private data, <T as drm::Driver>::Data, is
initialized in-place.
Due to the order of fields in drm::Device
pub struct Device<T: drm::Driver> {
dev: Opaque<bindings::drm_device>,
data: T::Data,
}
even with an arbitrary large alignment requirement of T::Data it can't
happen that the size of Device is smaller than its alignment requirement.
However, let's not rely on this subtle circumstance and create a proper
kmalloc() compatible Layout.
Fixes: 1e4b8896c0 ("rust: drm: add device abstraction")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250731154919.4132-3-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
aligned_size() dates back to when Rust did support kmalloc() only, but
is now used in ReallocFunc::call() and hence for all allocators.
However, the additional padding applied by aligned_size() is only
required by the kmalloc() allocator backend.
Hence, replace aligned_size() with Kmalloc::aligned_layout() and use it
for the affected allocators, i.e. kmalloc() and kvmalloc(), only.
While at it, make Kmalloc::aligned_layout() public, such that Rust
abstractions, which have to call subsystem specific kmalloc() based
allocation primitives directly, can make use of it.
Fixes: 8a799831fc ("rust: alloc: implement `ReallocFunc`")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250731154919.4132-2-dakr@kernel.org
[ Remove `const` from Kmalloc::aligned_layout(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
GPUVM deserves a bit more coordination, also given the upcoming Rust
work for GPUVM, hence add a dedicated maintainers entry for DRM GPUVM.
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250808092432.461250-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The current iosys_map_clear() implementation reads the potentially
uninitialized 'is_iomem' boolean field to decide which union member
to clear. This causes undefined behavior when called on uninitialized
structures, as 'is_iomem' may contain garbage values like 0xFF.
UBSAN detects this as:
UBSAN: invalid-load in include/linux/iosys-map.h:267
load of value 255 is not a valid value for type '_Bool'
Fix by unconditionally clearing the entire structure with memset(),
eliminating the need to read uninitialized data and ensuring all
fields are set to known good values.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14639
Fixes: 01fd30da04 ("dma-buf: Add struct dma-buf-map for storing struct dma_buf.vaddr_ptr")
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250718105051.2709487-1-nitin.r.gote@intel.com
Fix failures on big-endian architectures on tests cases
single_pixel_source_buffer, single_pixel_clip_rectangle,
well_known_colors and destination_pitch.
Fixes: 15bda1f8de ("drm/tests: Add calls to drm_fb_blit() on supported format conversion tests")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250630090054.353246-2-jose.exposito89@gmail.com
When compiling with sparse enabled, this warning is thrown:
warning: incorrect type in argument 2 (different base types)
expected restricted __le32 const [usertype] *buf
got unsigned int [usertype] *[assigned] buf
Add a cast to fix it.
Fixes: 4531143196 ("drm/format-helper: Add KUnit tests for drm_fb_xrgb8888_to_xrgb2101010()")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250630090054.353246-1-jose.exposito89@gmail.com
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
