Depending on the security set the response to L2CAP_LE_CONN_REQ shall be
just L2CAP_CR_LE_ENCRYPTION if only encryption when BT_SECURITY_MEDIUM
is selected since that means security mode 2 which doesn't require
authentication which is something that is covered in the qualification
test L2CAP/LE/CFC/BV-25-C.
Link: https://github.com/bluez/bluez/issues/1270
Fixes: 27e2d4c8d2 ("Bluetooth: Add basic LE L2CAP connect request receiving support")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In 'mgmt_hci_cmd_sync()', check whether the size of parameters passed
in 'struct mgmt_cp_hci_cmd_sync' matches the total size of the data
(i.e. 'sizeof(struct mgmt_cp_hci_cmd_sync)' plus trailing bytes).
Otherwise, large invalid 'params_len' will cause 'hci_cmd_sync_alloc()'
to do 'skb_put_data()' from an area beyond the one actually passed to
'mgmt_hci_cmd_sync()'.
Reported-by: syzbot+5fe2d5bfbfbec0b675a0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5fe2d5bfbfbec0b675a0
Fixes: 827af4787e ("Bluetooth: MGMT: Add initial implementation of MGMT_OP_HCI_CMD_SYNC")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
syzbot reported a uaf in page_pool_recycle_in_ring:
BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30 kernel/locking/lockdep.c:5862
Read of size 8 at addr ffff8880286045a0 by task syz.0.284/6943
CPU: 0 UID: 0 PID: 6943 Comm: syz.0.284 Not tainted 6.13.0-rc3-syzkaller-gdfa94ce54f41 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x169/0x550 mm/kasan/report.c:489
kasan_report+0x143/0x180 mm/kasan/report.c:602
lock_release+0x151/0xa30 kernel/locking/lockdep.c:5862
__raw_spin_unlock_bh include/linux/spinlock_api_smp.h:165 [inline]
_raw_spin_unlock_bh+0x1b/0x40 kernel/locking/spinlock.c:210
spin_unlock_bh include/linux/spinlock.h:396 [inline]
ptr_ring_produce_bh include/linux/ptr_ring.h:164 [inline]
page_pool_recycle_in_ring net/core/page_pool.c:707 [inline]
page_pool_put_unrefed_netmem+0x748/0xb00 net/core/page_pool.c:826
page_pool_put_netmem include/net/page_pool/helpers.h:323 [inline]
page_pool_put_full_netmem include/net/page_pool/helpers.h:353 [inline]
napi_pp_put_page+0x149/0x2b0 net/core/skbuff.c:1036
skb_pp_recycle net/core/skbuff.c:1047 [inline]
skb_free_head net/core/skbuff.c:1094 [inline]
skb_release_data+0x6c4/0x8a0 net/core/skbuff.c:1125
skb_release_all net/core/skbuff.c:1190 [inline]
__kfree_skb net/core/skbuff.c:1204 [inline]
sk_skb_reason_drop+0x1c9/0x380 net/core/skbuff.c:1242
kfree_skb_reason include/linux/skbuff.h:1263 [inline]
__skb_queue_purge_reason include/linux/skbuff.h:3343 [inline]
root cause is:
page_pool_recycle_in_ring
ptr_ring_produce
spin_lock(&r->producer_lock);
WRITE_ONCE(r->queue[r->producer++], ptr)
//recycle last page to pool
page_pool_release
page_pool_scrub
page_pool_empty_ring
ptr_ring_consume
page_pool_return_page //release all page
__page_pool_destroy
free_percpu(pool->recycle_stats);
free(pool) //free
spin_unlock(&r->producer_lock); //pool->ring uaf read
recycle_stat_inc(pool, ring);
page_pool can be free while page pool recycle the last page in ring.
Add producer-lock barrier to page_pool_release to prevent the page
pool from being free before all pages have been recycled.
recycle_stat_inc() is empty when CONFIG_PAGE_POOL_STATS is not
enabled, which will trigger Wempty-body build warning. Add definition
for pool stat macro to fix warning.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/netdev/20250513083123.3514193-1-dongchenchen2@huawei.com
Fixes: ff7d6b27f8 ("page_pool: refurbish version of page_pool code")
Reported-by: syzbot+204a4382fcb3311f3858@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=204a4382fcb3311f3858
Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250527114152.3119109-1-dongchenchen2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a process under memory pressure is not part of any cgroup and
the charged flag is false, trace_sock_exceed_buf_limit was not called
as expected.
This regression was introduced by commit 2def8ff3fd ("sock:
Code cleanup on __sk_mem_raise_allocated()"). The fix changes the
default value of charged to true while preserving existing logic.
Fixes: 2def8ff3fd ("sock: Code cleanup on __sk_mem_raise_allocated()")
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Tengteng Yang <yangtengteng@bytedance.com>
Link: https://patch.msgid.link/20250527030419.67693-1-yangtengteng@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull bpf updates from Alexei Starovoitov:
- Fix and improve BTF deduplication of identical BTF types (Alan
Maguire and Andrii Nakryiko)
- Support up to 12 arguments in BPF trampoline on arm64 (Xu Kuohai and
Alexis Lothoré)
- Support load-acquire and store-release instructions in BPF JIT on
riscv64 (Andrea Parri)
- Fix uninitialized values in BPF_{CORE,PROBE}_READ macros (Anton
Protopopov)
- Streamline allowed helpers across program types (Feng Yang)
- Support atomic update for hashtab of BPF maps (Hou Tao)
- Implement json output for BPF helpers (Ihor Solodrai)
- Several s390 JIT fixes (Ilya Leoshkevich)
- Various sockmap fixes (Jiayuan Chen)
- Support mmap of vmlinux BTF data (Lorenz Bauer)
- Support BPF rbtree traversal and list peeking (Martin KaFai Lau)
- Tests for sockmap/sockhash redirection (Michal Luczaj)
- Introduce kfuncs for memory reads into dynptrs (Mykyta Yatsenko)
- Add support for dma-buf iterators in BPF (T.J. Mercier)
- The verifier support for __bpf_trap() (Yonghong Song)
* tag 'bpf-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (135 commits)
bpf, arm64: Remove unused-but-set function and variable.
selftests/bpf: Add tests with stack ptr register in conditional jmp
bpf: Do not include stack ptr register in precision backtracking bookkeeping
selftests/bpf: enable many-args tests for arm64
bpf, arm64: Support up to 12 function arguments
bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem()
bpf: Avoid __bpf_prog_ret0_warn when jit fails
bpftool: Add support for custom BTF path in prog load/loadall
selftests/bpf: Add unit tests with __bpf_trap() kfunc
bpf: Warn with __bpf_trap() kfunc maybe due to uninitialized variable
bpf: Remove special_kfunc_set from verifier
selftests/bpf: Add test for open coded dmabuf_iter
selftests/bpf: Add test for dmabuf_iter
bpf: Add open coded dmabuf iterator
bpf: Add dmabuf iterator
dma-buf: Rename debugfs symbols
bpf: Fix error return value in bpf_copy_from_user_dynptr
libbpf: Use mmap to parse vmlinux BTF from sysfs
selftests: bpf: Add a test for mmapable vmlinux BTF
btf: Allow mmap of vmlinux btf
...
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
xs_tcp_tls_finish_connecting() already marks the upper xprt
connected, so the same code in xs_tcp_tls_setup_socket() is
never executed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Engineers at Hammerspace noticed that sometimes mounting with
"xprtsec=tls" hangs for a minute or so, and then times out, even
when the NFS server is reachable and responsive.
kTLS shuts off data_ready callbacks if strp->msg_ready is set to
mitigate data_ready callbacks when a full TLS record is not yet
ready to be read from the socket.
Normally msg_ready is clear when the first TLS record arrives on
a socket. However, I observed that sometimes tls_setsockopt() sets
strp->msg_ready, and that prevents forward progress because
tls_data_ready() becomes a no-op.
Moreover, Jakub says: "If there's a full record queued at the time
when [tlshd] passes the socket back to the kernel, it's up to the
reader to read the already queued data out." So SunRPC cannot
expect a data_ready call when ingress data is already waiting.
Add an explicit poll after SunRPC's upper transport is set up to
pick up any data that arrived after the TLS handshake but before
transport set-up is complete.
Reported-by: Steve Sears <sjs@hammerspace.com>
Suggested-by: Jakub Kacinski <kuba@kernel.org>
Fixes: 75eb6af7ac ("SUNRPC: Add a TCP-with-TLS RPC transport class")
Tested-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Pull nfsd updates from Chuck Lever:
"The marquee feature for this release is that the limit on the maximum
rsize and wsize has been raised to 4MB. The default remains at 1MB,
but risk-seeking administrators now have the ability to try larger I/O
sizes with NFS clients that support them. Eventually the default
setting will be increased when we have confidence that this change
will not have negative impact.
With v6.16, NFSD now has its own debugfs file system where we can add
experimental features and make them available outside of our
development community without impacting production deployments. The
first experimental setting added is one that makes all NFS READ
operations use vfs_iter_read() instead of the NFSD splice actor. The
plan is to eventually retire the splice actor, as that will enable a
number of new capabilities such as the use of struct bio_vec from the
top to the bottom of the NFSD stack.
Jeff Layton contributed a number of observability improvements. The
use of dprintk() in a number of high-traffic code paths has been
replaced with static trace points.
This release sees the continuation of efforts to harden the NFSv4.2
COPY operation. Soon, the restriction on async COPY operations can be
lifted.
Many thanks to the contributors, reviewers, testers, and bug reporters
who participated during the v6.16 development cycle"
* tag 'nfsd-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (60 commits)
xdrgen: Fix code generated for counted arrays
SUNRPC: Bump the maximum payload size for the server
NFSD: Add a "default" block size
NFSD: Remove NFSSVC_MAXBLKSIZE_V2 macro
NFSD: Remove NFSD_BUFSIZE
sunrpc: Remove the RPCSVC_MAXPAGES macro
svcrdma: Adjust the number of entries in svc_rdma_send_ctxt::sc_pages
svcrdma: Adjust the number of entries in svc_rdma_recv_ctxt::rc_pages
sunrpc: Adjust size of socket's receive page array dynamically
SUNRPC: Remove svc_rqst :: rq_vec
SUNRPC: Remove svc_fill_write_vector()
NFSD: Use rqstp->rq_bvec in nfsd_iter_write()
SUNRPC: Export xdr_buf_to_bvec()
NFSD: De-duplicate the svc_fill_write_vector() call sites
NFSD: Use rqstp->rq_bvec in nfsd_iter_read()
sunrpc: Replace the rq_bvec array with dynamically-allocated memory
sunrpc: Replace the rq_pages array with dynamically-allocated memory
sunrpc: Remove backchannel check in svc_init_buffer()
sunrpc: Add a helper to derive maxpages from sv_max_mesg
svcrdma: Reduce the number of rdma_rw contexts per-QP
...
The unexpected MPLS packet may not end with the bottom label stack.
When there are many stacks, The label count value has wrapped around.
A dead loop occurs, soft lockup/CPU stuck finally.
stack backtrace:
UBSAN: array-index-out-of-bounds in /build/linux-0Pa0xK/linux-5.15.0/net/openvswitch/flow.c:662:26
index -1 is out of range for type '__be32 [3]'
CPU: 34 PID: 0 Comm: swapper/34 Kdump: loaded Tainted: G OE 5.15.0-121-generic #131-Ubuntu
Hardware name: Dell Inc. PowerEdge C6420/0JP9TF, BIOS 2.12.2 07/14/2021
Call Trace:
<IRQ>
show_stack+0x52/0x5c
dump_stack_lvl+0x4a/0x63
dump_stack+0x10/0x16
ubsan_epilogue+0x9/0x36
__ubsan_handle_out_of_bounds.cold+0x44/0x49
key_extract_l3l4+0x82a/0x840 [openvswitch]
? kfree_skbmem+0x52/0xa0
key_extract+0x9c/0x2b0 [openvswitch]
ovs_flow_key_extract+0x124/0x350 [openvswitch]
ovs_vport_receive+0x61/0xd0 [openvswitch]
? kernel_init_free_pages.part.0+0x4a/0x70
? get_page_from_freelist+0x353/0x540
netdev_port_receive+0xc4/0x180 [openvswitch]
? netdev_port_receive+0x180/0x180 [openvswitch]
netdev_frame_hook+0x1f/0x40 [openvswitch]
__netif_receive_skb_core.constprop.0+0x23a/0xf00
__netif_receive_skb_list_core+0xfa/0x240
netif_receive_skb_list_internal+0x18e/0x2a0
napi_complete_done+0x7a/0x1c0
bnxt_poll+0x155/0x1c0 [bnxt_en]
__napi_poll+0x30/0x180
net_rx_action+0x126/0x280
? bnxt_msix+0x67/0x80 [bnxt_en]
handle_softirqs+0xda/0x2d0
irq_exit_rcu+0x96/0xc0
common_interrupt+0x8e/0xa0
</IRQ>
Fixes: fbdcdd78da ("Change in Openvswitch to support MPLS label depth of 3 in ingress direction")
Signed-off-by: Faicker Mo <faicker.mo@zenlayer.com>
Acked-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/259D3404-575D-4A6D-B263-1DF59A67CF89@zenlayer.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
GENERIC_ALLOCATOR is a non-prompt kconfig, meaning users can't enable it
selectively. All kconfig users of GENERIC_ALLOCATOR select it, except of
NET_DEVMEM which only depends on it, there is no easy way to turn
GENERIC_ALLOCATOR on unless we select other unnecessary configs that
will select it.
Instead of depending on it, select it when NET_DEVMEM is enabled.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/1747950086-1246773-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tipc_aead_free() function currently uses kfree() to release the aead
structure. However, this structure contains sensitive information, such
as key's SALT value, which should be securely erased from memory to
prevent potential leakage.
To enhance security, replace kfree() with kfree_sensitive() when freeing
the aead structure. This change ensures that sensitive data is explicitly
cleared before memory deallocation, aligning with the approach used in
tipc_aead_init() and adhering to best practices for handling confidential
information.
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20250523114717.4021518-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull timer cleanups from Thomas Gleixner:
"Another set of timer API cleanups:
- Convert init_timer*(), try_to_del_timer_sync() and
destroy_timer_on_stack() over to the canonical timer_*()
namespace convention.
There is another large conversion pending, which has not been included
because it would have caused a gazillion of merge conflicts in next.
The conversion scripts will be run towards the end of the merge window
and a pull request sent once all conflict dependencies have been
merged"
* tag 'timers-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename destroy_timer_on_stack() as timer_destroy_on_stack()
treewide, timers: Rename try_to_del_timer_sync() as timer_delete_sync_try()
timers: Rename init_timers() as timers_init()
timers: Rename NEXT_TIMER_MAX_DELTA as TIMER_NEXT_MAX_DELTA
timers: Rename __init_timer_on_stack() as __timer_init_on_stack()
timers: Rename __init_timer() as __timer_init()
timers: Rename init_timer_on_stack_key() as timer_init_key_on_stack()
timers: Rename init_timer_key() as timer_init_key()
Syzkaller reports the following issue:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:578
__mutex_lock+0x106/0xe80 kernel/locking/mutex.c:746
team_change_rx_flags+0x38/0x220 drivers/net/team/team_core.c:1781
dev_change_rx_flags net/core/dev.c:9145 [inline]
__dev_set_promiscuity+0x3f8/0x590 net/core/dev.c:9189
netif_set_promiscuity+0x50/0xe0 net/core/dev.c:9201
dev_set_promiscuity+0x126/0x260 net/core/dev_api.c:286 packet_dev_mc net/packet/af_packet.c:3698 [inline]
packet_dev_mclist_delete net/packet/af_packet.c:3722 [inline]
packet_notifier+0x292/0xa60 net/packet/af_packet.c:4247
notifier_call_chain+0x1b3/0x3e0 kernel/notifier.c:85
call_netdevice_notifiers_extack net/core/dev.c:2214 [inline]
call_netdevice_notifiers net/core/dev.c:2228 [inline]
unregister_netdevice_many_notify+0x15d8/0x2330 net/core/dev.c:11972
rtnl_delete_link net/core/rtnetlink.c:3522 [inline]
rtnl_dellink+0x488/0x710 net/core/rtnetlink.c:3564
rtnetlink_rcv_msg+0x7cf/0xb70 net/core/rtnetlink.c:6955
netlink_rcv_skb+0x219/0x490 net/netlink/af_netlink.c:2534
Calling `PACKET_ADD_MEMBERSHIP` on an ops-locked device can trigger
the `NETDEV_UNREGISTER` notifier, which may require disabling promiscuous
and/or allmulti mode. Both of these operations require acquiring
the netdev instance lock.
Move the call to `packet_dev_mc` outside of the RCU critical section.
The `mclist` modifications (add, del, flush, unregister) are protected by
the RTNL, not the RCU. The RCU only protects the `sklist` and its
associated `sks`. The delayed operation on the `mclist` entry remains
within the RTNL.
Reported-by: syzbot+b191b5ccad8d7a986286@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b191b5ccad8d7a986286
Fixes: ad7c7b2172 ("net: hold netdev instance lock during sysfs operations")
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250522031129.3247266-1-stfomichev@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Lingering should be transport-independent in the long run. In preparation
for supporting other transports, as well as the linger on shutdown(), move
code to core.
Generalize by querying vsock_transport::unsent_bytes(), guard against the
callback being unimplemented. Do not pass sk_lingertime explicitly. Pull
SOCK_LINGER check into vsock_linger().
Flatten the function. Remove the nested block by inverting the condition:
return early on !timeout.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250522-vsock-linger-v6-2-2ad00b0e447e@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently vsock's lingering effectively boils down to waiting (or timing
out) until packets are consumed or dropped by the peer; be it by receiving
the data, closing or shutting down the connection.
To align with the semantics described in the SO_LINGER section of man
socket(7) and to mimic AF_INET's behaviour more closely, change the logic
of a lingering close(): instead of waiting for all data to be handled,
block until data is considered sent from the vsock's transport point of
view. That is until worker picks the packets for processing and decrements
virtio_vsock_sock::bytes_unsent down to 0.
Note that (some interpretation of) lingering was always limited to
transports that called virtio_transport_wait_close() on transport release.
This does not change, i.e. under Hyper-V and VMCI no lingering would be
observed.
The implementation does not adhere strictly to man page's interpretation of
SO_LINGER: shutdown() will not trigger the lingering. This follows AF_INET.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250522-vsock-linger-v6-1-2ad00b0e447e@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Instead of a heap allocating a variably sized struct sockaddr and lying
about the type in the call to netif_set_mac_address(), use a stack
allocated struct sockaddr_storage. This lets us drop the cast and avoid
the allocation.
Putting "ss" on the stack means it will get a reused stack slot since
it is the same size (128B) as other existing single-scope stack variables,
like the vfinfo array (128B), so no additional stack space is used by
this function.
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250521204619.2301870-7-kees@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In order to avoid passing around struct sockaddr that has a size the
compiler cannot reason about (nor track at runtime), convert
netif_set_mac_address() to take struct sockaddr_storage. This is just a
cast conversion, so there is are no binary changes. Following patches
will make actual allocation changes.
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250521204619.2301870-2-kees@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull coredump updates from Christian Brauner:
"This adds support for sending coredumps over an AF_UNIX socket. It
also makes (implicit) use of the new SO_PEERPIDFD ability to hand out
pidfds for reaped peer tasks
The new coredump socket will allow userspace to not have to rely on
usermode helpers for processing coredumps and provides a saf way to
handle them instead of relying on super privileged coredumping helpers
This will also be significantly more lightweight since the kernel
doens't have to do a fork()+exec() for each crashing process to spawn
a usermodehelper. Instead the kernel just connects to the AF_UNIX
socket and userspace can process it concurrently however it sees fit.
Support for userspace is incoming starting with systemd-coredump
There's more work coming in that direction next cycle. The rest below
goes into some details and background
Coredumping currently supports two modes:
(1) Dumping directly into a file somewhere on the filesystem.
(2) Dumping into a pipe connected to a usermode helper process
spawned as a child of the system_unbound_wq or kthreadd
For simplicity I'm mostly ignoring (1). There's probably still some
users of (1) out there but processing coredumps in this way can be
considered adventurous especially in the face of set*id binaries
The most common option should be (2) by now. It works by allowing
userspace to put a string into /proc/sys/kernel/core_pattern like:
|/usr/lib/systemd/systemd-coredump %P %u %g %s %t %c %h
The "|" at the beginning indicates to the kernel that a pipe must be
used. The path following the pipe indicator is a path to a binary that
will be spawned as a usermode helper process. Any additional
parameters pass information about the task that is generating the
coredump to the binary that processes the coredump
In the example the core_pattern shown causes the kernel to spawn
systemd-coredump as a usermode helper. There's various conceptual
consequences of this (non-exhaustive list):
- systemd-coredump is spawned with file descriptor number 0 (stdin)
connected to the read-end of the pipe. All other file descriptors
are closed. That specifically includes 1 (stdout) and 2 (stderr).
This has already caused bugs because userspace assumed that this
cannot happen (Whether or not this is a sane assumption is
irrelevant)
- systemd-coredump will be spawned as a child of system_unbound_wq.
So it is not a child of any userspace process and specifically not
a child of PID 1. It cannot be waited upon and is in a weird hybrid
upcall which are difficult for userspace to control correctly
- systemd-coredump is spawned with full kernel privileges. This
necessitates all kinds of weird privilege dropping excercises in
userspace to make this safe
- A new usermode helper has to be spawned for each crashing process
This adds a new mode:
(3) Dumping into an AF_UNIX socket
Userspace can set /proc/sys/kernel/core_pattern to:
@/path/to/coredump.socket
The "@" at the beginning indicates to the kernel that an AF_UNIX
coredump socket will be used to process coredumps
The coredump socket must be located in the initial mount namespace.
When a task coredumps it opens a client socket in the initial network
namespace and connects to the coredump socket:
- The coredump server uses SO_PEERPIDFD to get a stable handle on the
connected crashing task. The retrieved pidfd will provide a stable
reference even if the crashing task gets SIGKILLed while generating
the coredump. That is a huge attack vector right now
- By setting core_pipe_limit non-zero userspace can guarantee that
the crashing task cannot be reaped behind it's back and thus
process all necessary information in /proc/<pid>. The SO_PEERPIDFD
can be used to detect whether /proc/<pid> still refers to the same
process
The core_pipe_limit isn't used to rate-limit connections to the
socket. This can simply be done via AF_UNIX socket directly
- The pidfd for the crashing task will contain information how the
task coredumps. The PIDFD_GET_INFO ioctl gained a new flag
PIDFD_INFO_COREDUMP which can be used to retreive the coredump
information
If the coredump gets a new coredump client connection the kernel
guarantees that PIDFD_INFO_COREDUMP information is available.
Currently the following information is provided in the new
@coredump_mask extension to struct pidfd_info:
* PIDFD_COREDUMPED is raised if the task did actually coredump
* PIDFD_COREDUMP_SKIP is raised if the task skipped coredumping
(e.g., undumpable)
* PIDFD_COREDUMP_USER is raised if this is a regular coredump and
doesn't need special care by the coredump server
* PIDFD_COREDUMP_ROOT is raised if the generated coredump should
be treated as sensitive and the coredump server should restrict
access to the generated coredump to sufficiently privileged
users"
* tag 'vfs-6.16-rc1.coredump' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
mips, net: ensure that SOCK_COREDUMP is defined
selftests/coredump: add tests for AF_UNIX coredumps
selftests/pidfd: add PIDFD_INFO_COREDUMP infrastructure
coredump: validate socket name as it is written
coredump: show supported coredump modes
pidfs, coredump: add PIDFD_INFO_COREDUMP
coredump: add coredump socket
coredump: reflow dump helpers a little
coredump: massage do_coredump()
coredump: massage format_corename()
Pull pidfs updates from Christian Brauner:
"Features:
- Allow handing out pidfds for reaped tasks for AF_UNIX SO_PEERPIDFD
socket option
SO_PEERPIDFD is a socket option that allows to retrieve a pidfd for
the process that called connect() or listen(). This is heavily used
to safely authenticate clients in userspace avoiding security bugs
due to pid recycling races (dbus, polkit, systemd, etc.)
SO_PEERPIDFD currently doesn't support handing out pidfds if the
sk->sk_peer_pid thread-group leader has already been reaped. In
this case it currently returns EINVAL. Userspace still wants to get
a pidfd for a reaped process to have a stable handle it can pass
on. This is especially useful now that it is possible to retrieve
exit information through a pidfd via the PIDFD_GET_INFO ioctl()'s
PIDFD_INFO_EXIT flag
Another summary has been provided by David Rheinsberg:
> A pidfd can outlive the task it refers to, and thus user-space
> must already be prepared that the task underlying a pidfd is
> gone at the time they get their hands on the pidfd. For
> instance, resolving the pidfd to a PID via the fdinfo must be
> prepared to read `-1`.
>
> Despite user-space knowing that a pidfd might be stale, several
> kernel APIs currently add another layer that checks for this. In
> particular, SO_PEERPIDFD returns `EINVAL` if the peer-task was
> already reaped, but returns a stale pidfd if the task is reaped
> immediately after the respective alive-check.
>
> This has the unfortunate effect that user-space now has two ways
> to check for the exact same scenario: A syscall might return
> EINVAL/ESRCH/... *or* the pidfd might be stale, even though
> there is no particular reason to distinguish both cases. This
> also propagates through user-space APIs, which pass on pidfds.
> They must be prepared to pass on `-1` *or* the pidfd, because
> there is no guaranteed way to get a stale pidfd from the kernel.
>
> Userspace must already deal with a pidfd referring to a reaped
> task as the task may exit and get reaped at any time will there
> are still many pidfds referring to it
In order to allow handing out reaped pidfd SO_PEERPIDFD needs to
ensure that PIDFD_INFO_EXIT information is available whenever a
pidfd for a reaped task is created by PIDFD_INFO_EXIT. The uapi
promises that reaped pidfds are only handed out if it is guaranteed
that the caller sees the exit information:
TEST_F(pidfd_info, success_reaped)
{
struct pidfd_info info = {
.mask = PIDFD_INFO_CGROUPID | PIDFD_INFO_EXIT,
};
/*
* Process has already been reaped and PIDFD_INFO_EXIT been set.
* Verify that we can retrieve the exit status of the process.
*/
ASSERT_EQ(ioctl(self->child_pidfd4, PIDFD_GET_INFO, &info), 0);
ASSERT_FALSE(!!(info.mask & PIDFD_INFO_CREDS));
ASSERT_TRUE(!!(info.mask & PIDFD_INFO_EXIT));
ASSERT_TRUE(WIFEXITED(info.exit_code));
ASSERT_EQ(WEXITSTATUS(info.exit_code), 0);
}
To hand out pidfds for reaped processes we thus allocate a pidfs
entry for the relevant sk->sk_peer_pid at the time the
sk->sk_peer_pid is stashed and drop it when the socket is
destroyed. This guarantees that exit information will always be
recorded for the sk->sk_peer_pid task and we can hand out pidfds
for reaped processes
- Hand a pidfd to the coredump usermode helper process
Give userspace a way to instruct the kernel to install a pidfd for
the crashing process into the process started as a usermode helper.
There's still tricky race-windows that cannot be easily or
sometimes not closed at all by userspace. There's various ways like
looking at the start time of a process to make sure that the
usermode helper process is started after the crashing process but
it's all very very brittle and fraught with peril
The crashed-but-not-reaped process can be killed by userspace
before coredump processing programs like systemd-coredump have had
time to manually open a PIDFD from the PID the kernel provides
them, which means they can be tricked into reading from an
arbitrary process, and they run with full privileges as they are
usermode helper processes
Even if that specific race-window wouldn't exist it's still the
safest and cleanest way to let the kernel provide the pidfd
directly instead of requiring userspace to do it manually. In
parallel with this commit we already have systemd adding support
for this in [1]
When the usermode helper process is forked we install a pidfd file
descriptor three into the usermode helper's file descriptor table
so it's available to the exec'd program
Since usermode helpers are either children of the system_unbound_wq
workqueue or kthreadd we know that the file descriptor table is
empty and can thus always use three as the file descriptor number
Note, that we'll install a pidfd for the thread-group leader even
if a subthread is calling do_coredump(). We know that task linkage
hasn't been removed yet and even if this @current isn't the actual
thread-group leader we know that the thread-group leader cannot be
reaped until
@current has exited
- Allow telling when a task has not been found from finding the wrong
task when creating a pidfd
We currently report EINVAL whenever a struct pid has no tasked
attached anymore thereby conflating two concepts:
(1) The task has already been reaped
(2) The caller requested a pidfd for a thread-group leader but the
pid actually references a struct pid that isn't used as a
thread-group leader
This is causing issues for non-threaded workloads as in where they
expect ESRCH to be reported, not EINVAL
So allow userspace to reliably distinguish between (1) and (2)
- Make it possible to detect when a pidfs entry would outlive the
struct pid it pinned
- Add a range of new selftests
Cleanups:
- Remove unneeded NULL check from pidfd_prepare() for passed struct
pid
- Avoid pointless reference count bump during release_task()
Fixes:
- Various fixes to the pidfd and coredump selftests
- Fix error handling for replace_fd() when spawning coredump usermode
helper"
* tag 'vfs-6.16-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
pidfs: detect refcount bugs
coredump: hand a pidfd to the usermode coredump helper
coredump: fix error handling for replace_fd()
pidfs: move O_RDWR into pidfs_alloc_file()
selftests: coredump: Raise timeout to 2 minutes
selftests: coredump: Fix test failure for slow machines
selftests: coredump: Properly initialize pointer
net, pidfs: enable handing out pidfds for reaped sk->sk_peer_pid
pidfs: get rid of __pidfd_prepare()
net, pidfs: prepare for handing out pidfds for reaped sk->sk_peer_pid
pidfs: register pid in pidfs
net, pidfd: report EINVAL for ESRCH
release_task: kill the no longer needed get/put_pid(thread_pid)
pidfs: ensure consistent ENOENT/ESRCH reporting
exit: move wake_up_all() pidfd waiters into __unhash_process()
selftest/pidfd: add test for thread-group leader pidfd open for thread
pidfd: improve uapi when task isn't found
pidfd: remove unneeded NULL check from pidfd_prepare()
selftests/pidfd: adapt to recent changes
In `struct virtio_vsock_sock`, we maintain two counters:
- `rx_bytes`: used internally to track how many bytes have been read.
This supports mechanisms like .stream_has_data() and sock_rcvlowat().
- `fwd_cnt`: used for the credit mechanism to inform available receive
buffer space to the remote peer.
These counters are updated via virtio_transport_inc_rx_pkt() and
virtio_transport_dec_rx_pkt().
Since the beginning with commit 06a8fc7836 ("VSOCK: Introduce
virtio_vsock_common.ko"), we call virtio_transport_dec_rx_pkt() in
virtio_transport_stream_do_dequeue() only when we consume the entire
packet, so partial reads, do not update `rx_bytes` and `fwd_cnt`.
This is fine for `fwd_cnt`, because we still have space used for the
entire packet, and we don't want to update the credit for the other
peer until we free the space of the entire packet. However, this
causes `rx_bytes` to be stale on partial reads.
Previously, this didn’t cause issues because `rx_bytes` was used only by
.stream_has_data(), and any unread portion of a packet implied data was
still available. However, since commit 93b8088766
("virtio/vsock: fix logic which reduces credit update messages"), we now
rely on `rx_bytes` to determine if a credit update should be sent when
the data in the RX queue drops below SO_RCVLOWAT value.
This patch fixes the accounting by updating `rx_bytes` with the number
of bytes actually read, even on partial reads, while leaving `fwd_cnt`
untouched until the packet is fully consumed. Also introduce a new
`buf_used` counter to check that the remote peer is honoring the given
credit; this was previously done via `rx_bytes`.
Fixes: 93b8088766 ("virtio/vsock: fix logic which reduces credit update messages")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250521121705.196379-1-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next,
specifically 26 patches: 5 patches adding/updating selftests,
4 fixes, 3 PREEMPT_RT fixes, and 14 patches to enhance nf_tables):
1) Improve selftest coverage for pipapo 4 bit group format, from
Florian Westphal.
2) Fix incorrect dependencies when compiling a kernel without
legacy ip{6}tables support, also from Florian.
3) Two patches to fix nft_fib vrf issues, including selftest updates
to improve coverage, also from Florian Westphal.
4) Fix incorrect nesting in nft_tunnel's GENEVE support, from
Fernando F. Mancera.
5) Three patches to fix PREEMPT_RT issues with nf_dup infrastructure
and nft_inner to match in inner headers, from Sebastian Andrzej Siewior.
6) Integrate conntrack information into nft trace infrastructure,
from Florian Westphal.
7) A series of 13 patches to allow to specify wildcard netdevice in
netdev basechain and flowtables, eg.
table netdev filter {
chain ingress {
type filter hook ingress devices = { eth0, eth1, vlan* } priority 0; policy accept;
}
}
This also allows for runtime hook registration on NETDEV_{UN}REGISTER
event, from Phil Sutter.
netfilter pull request 25-05-23
* tag 'nf-next-25-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: (26 commits)
selftests: netfilter: Torture nftables netdev hooks
netfilter: nf_tables: Add notifications for hook changes
netfilter: nf_tables: Support wildcard netdev hook specs
netfilter: nf_tables: Sort labels in nft_netdev_hook_alloc()
netfilter: nf_tables: Handle NETDEV_CHANGENAME events
netfilter: nf_tables: Wrap netdev notifiers
netfilter: nf_tables: Respect NETDEV_REGISTER events
netfilter: nf_tables: Prepare for handling NETDEV_REGISTER events
netfilter: nf_tables: Have a list of nf_hook_ops in nft_hook
netfilter: nf_tables: Pass nf_hook_ops to nft_unregister_flowtable_hook()
netfilter: nf_tables: Introduce nft_register_flowtable_ops()
netfilter: nf_tables: Introduce nft_hook_find_ops{,_rcu}()
netfilter: nf_tables: Introduce functions freeing nft_hook objects
netfilter: nf_tables: add packets conntrack state to debug trace info
netfilter: conntrack: make nf_conntrack_id callable without a module dependency
netfilter: nf_dup_netdev: Move the recursion counter struct netdev_xmit
netfilter: nft_inner: Use nested-BH locking for nft_pcpu_tun_ctx
netfilter: nf_dup{4, 6}: Move duplication check to task_struct
netfilter: nft_tunnel: fix geneve_opt dump
selftests: netfilter: nft_fib.sh: add type and oif tests with and without VRFs
...
====================
Link: https://patch.msgid.link/20250523132712.458507-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Steffen Klassert says:
====================
1) Remove some unnecessary strscpy_pad() size arguments.
From Thorsten Blum.
2) Correct use of xso.real_dev on bonding offloads.
Patchset from Cosmin Ratiu.
3) Add hardware offload configuration to XFRM_MSG_MIGRATE.
From Chiachang Wang.
4) Refactor migration setup during cloning. This was
done after the clone was created. Now it is done
in the cloning function itself.
From Chiachang Wang.
5) Validate assignment of maximal possible SEQ number.
Prevent from setting to the maximum sequrnce number
as this would cause for traffic drop.
From Leon Romanovsky.
6) Prevent configuration of interface index when offload
is used. Hardware can't handle this case.i
From Leon Romanovsky.
7) Always use kfree_sensitive() for SA secret zeroization.
From Zilin Guan.
ipsec-next-2025-05-23
* tag 'ipsec-next-2025-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: use kfree_sensitive() for SA secret zeroization
xfrm: prevent configuration of interface index when offload is used
xfrm: validate assignment of maximal possible SEQ number
xfrm: Refactor migration setup during the cloning process
xfrm: Migrate offload configuration
bonding: Fix multiple long standing offload races
bonding: Mark active offloaded xfrm_states
xfrm: Add explicit dev to .xdo_dev_state_{add,delete,free}
xfrm: Remove unneeded device check from validate_xmit_xfrm
xfrm: Use xdo.dev instead of xdo.real_dev
net/mlx5: Avoid using xso.real_dev unnecessarily
xfrm: Remove unnecessary strscpy_pad() size arguments
====================
Link: https://patch.msgid.link/20250523075611.3723340-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub suggests:
> I have a different request :) Matt, once this ends up in net-next
> (end of this week) could you refactor it to use nlmsg_payload() ?
> It doesn't exist in net but this is exactly why it was added.
This refactors the additions to both mctp_dump_addrinfo(), and
mctp_rtm_getneigh() - two cases where we're calling nlh_data() on an
an incoming netlink message, without a prior nlmsg_parse().
For the neigh.c case, we cannot hit the failure where the nlh does not
contain a full ndmsg at present, as the core handler
(net/core/neighbour.c, neigh_get()) has already validated the size
through neigh_valid_req_get(), and would have failed the get operation
before the MCTP hander is called.
However, relying on that is a bit fragile, so apply the nlmsg_payload
refector here too.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250521-mctp-nlmsg-payload-v2-1-e85df160c405@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull vfs directory lookup updates from Christian Brauner:
"This contains cleanups for the lookup_one*() family of helpers.
We expose a set of functions with names containing "lookup_one_len"
and others without the "_len". This difference has nothing to do with
"len". It's rater a historical accident that can be confusing.
The functions without "_len" take a "mnt_idmap" pointer. This is found
in the "vfsmount" and that is an important question when choosing
which to use: do you have a vfsmount, or are you "inside" the
filesystem. A related question is "is permission checking relevant
here?".
nfsd and cachefiles *do* have a vfsmount but *don't* use the non-_len
functions. They pass nop_mnt_idmap and refuse to work on filesystems
which have any other idmap.
This work changes nfsd and cachefile to use the lookup_one family of
functions and to explictily pass &nop_mnt_idmap which is consistent
with all other vfs interfaces used where &nop_mnt_idmap is explicitly
passed.
The remaining uses of the "_one" functions do not require permission
checks so these are renamed to be "_noperm" and the permission
checking is removed.
This series also changes these lookup function to take a qstr instead
of separate name and len. In many cases this simplifies the call"
* tag 'vfs-6.16-rc1.async.dir' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
VFS: change lookup_one_common and lookup_noperm_common to take a qstr
Use try_lookup_noperm() instead of d_hash_and_lookup() outside of VFS
VFS: rename lookup_one_len family to lookup_noperm and remove permission check
cachefiles: Use lookup_one() rather than lookup_one_len()
nfsd: Use lookup_one() rather than lookup_one_len()
VFS: improve interface for lookup_one functions
Replace kfree_skb() used in neigh_resolve_output() and
neigh_connected_output() with kfree_skb_reason().
Following new skb drop reason is added:
/* failed to fill the device hard header */
SKB_DROP_REASON_NEIGH_HH_FILLFAIL
Signed-off-by: Qiu Yutan <qiu.yutan@zte.com.cn>
Signed-off-by: Jiang Kun <jiang.kun2@zte.com.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Xu Xin <xu.xin16@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Notify user space if netdev hooks are updated due to netdev add/remove
events. Send minimal notification messages by introducing
NFT_MSG_NEWDEV/DELDEV message types describing a single device only.
Upon NETDEV_CHANGENAME, the callback has no information about the
interface's old name. To provide a clear message to user space, include
the hook's stored interface name in the notification.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
User space may pass non-nul-terminated NFTA_DEVICE_NAME attribute values
to indicate a suffix wildcard.
Expect for multiple devices to match the given prefix in
nft_netdev_hook_alloc() and populate 'ops_list' with them all.
When checking for duplicate hooks, compare the shortest prefix so a
device may never match more than a single hook spec.
Finally respect the stored prefix length when hooking into new devices
from event handlers.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
No point in having err_hook_alloc, just call return directly. Also
rename err_hook_dev - it's not about the hook's device but freeing the
hook itself.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
For the sake of simplicity, treat them like consecutive NETDEV_REGISTER
and NETDEV_UNREGISTER events. If the new name matches a hook spec and
registration fails, escalate the error and keep things as they are.
To avoid unregistering the newly registered hook again during the
following fake NETDEV_UNREGISTER event, leave hooks alone if their
interface spec matches the new name.
Note how this patch also skips for NETDEV_REGISTER if the device is
already registered. This is not yet possible as the new name would have
to match the old one. This will change with wildcard interface specs,
though.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Handling NETDEV_CHANGENAME events has to traverse all chains/flowtables
twice, prepare for this. No functional change intended.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
