Pull pin control updates from Linus Walleij:
"An especially linear and sparse improvement and new drivers release.
Nothing exciting. The biggest change in Bartosz changes to make
gpiochip set/get calls return error codes (something we should have
fixed ages ago but is now finally getting fixed.)
Core changes:
- Add the devres devm_pinctrl_register_mappings() call that can
register some pin control machine mappings and have them go away
with the associated device
New drivers:
- Support for the Mediatek MT6893 and MT8196 SoCs
- Support for the Renesas RZ/V2N SoC
- Support for the NXP Freescale i.MX943 SoC
Improvements:
- Per-SoC suspend/resume callbacks in the Samsung drivers
- Set all pins as input (High-Z) at probe in the MCP23S08 driver
- Switch most GPIO chips to use the setters/getters with a return
value
- EGPIO support in the Qualcomm QCM2290 driver
- Fix up the number of available GPIO lines in Qualcomm QCS8300 and
QCS615"
* tag 'pinctrl-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits)
pinctrl: freescale: Add support for imx943 pinctrl
pinctrl: core: add devm_pinctrl_register_mappings()
pinctrl: remove extern specifier for functions in machine.h
pinctrl: mediatek: eint: Fix invalid pointer dereference for v1 platforms
pinctrl: freescale: Enable driver if platform is enabled.
pinctrl: freescale: Depend imx-scu driver on OF
pinctrl: armada-37xx: propagate error from armada_37xx_pmx_set_by_name()
pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get_direction()
pinctrl: armada-37xx: propagate error from armada_37xx_pmx_gpio_set_direction()
pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get()
pinctrl: armada-37xx: propagate error from armada_37xx_gpio_direction_output()
pinctrl: armada-37xx: set GPIO output value before setting direction
pinctrl: armada-37xx: use correct OUTPUT_VAL register for GPIOs > 31
pinctrl: meson: Drop unused aml_pctl_find_group_by_name()
pinctrl: at91: Fix possible out-of-boundary access
pinctrl: add stubs for OF-specific pinconf functions
pinctrl: qcom: correct the ngpios entry for QCS8300
pinctrl: qcom: correct the ngpios entry for QCS615
dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs8300
dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs615
...
During suspend the pinctrl_amd driver disables the interrupts for
any GPIOs that are not marked as wake sources.
This however does not prevent them from changing the wake status
bit during suspend, it just stops the system from waking.
If the system wakes from hardware sleep for another reason (such
as plugging in the AC adapter) this wake bits might be active.
This could potentially cause problems with going back to hardware
sleep. Add an extra debugging message when PM debugging is enabled
to help identify if this is happening.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3929
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20250407183656.1503446-2-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some laptops have pins which are a wake source for S0i3/S3 but which
aren't a wake source for S4/S5 and which cause issues when left unmasked
during hibernation (S4).
For example HP EliteBook 855 G7 has pin #24 that causes instant wakeup
(hibernation failure) if left unmasked (it is a wake source only for
S0i3/S3).
GPIO pin #24 on this platform is likely dedicated to WWAN XMM7360
modem since this pin triggers wake notify to WWAN modem's parent PCIe
port.
Fix this by considering a pin a wake source only if it is marked as one
for the current suspend type (S0i3/S3 vs S4/S5).
Since Z-wake pins only make sense at runtime these were excluded from
both of suspend categories, so pins with only the Z-wake flag set are
effectively treated as non-wake pins.
Fixes: 2fff0b5e1a ("pinctrl: amd: Mask non-wake source pins with interrupt enabled at suspend")
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/d4b2d076366fdd08a0c1cd9b7ecd91dc95e07269.1736184752.git.mail@maciej.szmigiero.name
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/pinctrl to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/20241007205803.444994-8-u.kleine-koenig@baylibre.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There is a problem when a driver requests a shared interrupt line to run a
threaded handler on it without IRQF_ONESHOT set if that flag has been set
already for the IRQ in question by somebody else. Namely, the request
fails which usually leads to a probe failure even though the driver might
have worked just fine with IRQF_ONESHOT, but it does not want to use it by
default. Currently, the only way to handle this is to try to request the
IRQ without IRQF_ONESHOT, but with IRQF_PROBE_SHARED set and if this fails,
try again with IRQF_ONESHOT set. However, this is a bit cumbersome and not
very clean.
When commit 7a36b901a6 ("ACPI: OSL: Use a threaded interrupt handler for
SCI") switched the ACPI subsystem over to using a threaded interrupt
handler for the SCI, it had to use IRQF_ONESHOT for it because that's
required due to the way the SCI handler works (it needs to walk all of the
enabled GPEs before the interrupt line can be unmasked). The SCI interrupt
line is not shared with other users very often due to the SCI handling
overhead, but on sone systems it is shared and when the other user of it
attempts to install a threaded handler, a flags mismatch related to
IRQF_ONESHOT may occur.
As it turned out, that happened to the pinctrl-amd driver and so commit
4451e8e841 ("pinctrl: amd: Add IRQF_ONESHOT to the interrupt request")
attempted to address the issue by adding IRQF_ONESHOT to the interrupt
flags in that driver, but this is now causing an IRQF_ONESHOT-related
mismatch to occur on another system which cannot boot as a result of it.
Clearly, pinctrl-amd can work with IRQF_ONESHOT if need be, but it should
not set that flag by default, so it needs a way to indicate that to the
interrupt subsystem.
To that end, introdcuce a new interrupt flag, IRQF_COND_ONESHOT, which will
only have effect when the IRQ line is shared and IRQF_ONESHOT has been set
for it already, in which case it will be promoted to the latter.
This is sufficient for drivers sharing the interrupt line with the SCI as
it is requested by the ACPI subsystem before any drivers are probed, so
they will always see IRQF_ONESHOT set for the interrupt in question.
Fixes: 4451e8e841 ("pinctrl: amd: Add IRQF_ONESHOT to the interrupt request")
Reported-by: Francisco Ayala Le Brun <francisco@videowindow.eu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: 6.8+ <stable@vger.kernel.org> # 6.8+
Closes: https://lore.kernel.org/lkml/CAN-StX1HqWqi+YW=t+V52-38Mfp5fAz7YHx4aH-CQjgyNiKx3g@mail.gmail.com/
Link: https://lore.kernel.org/r/12417336.O9o76ZdvQC@kreacher
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231009083856.222030-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Pull pin control updates from Linus Walleij:
"We have some patches to DTS[I] files in arm and arm64 as well, that
were merged here as DT headers were being changed.
The most interesting stuff is the Intel Tangier chip support and
AMLogic C3 in my opinion.
No core changes this time.
Drivers:
- Intel Tangier SoC pin control support
- AMLogic C3 SoC pin control support
- Texas Instruments AM654 SoC pin control support
- Qualcomm SM8350 and SM6115 LPASS (Low Power Audio Sub-System) pin
control support
- Qualcomm PMX75 and PM7550BA (Power Management) pin control support
- Qualcomm PMC8180 and PMC8180C (Power Management) pin control
support
- DROP the Oxnas driver as there is not enough of community interest
to keep carrying this ARM(11) port
Enhancements:
- Bias control in the MT7986 pin control driver
- Misc device tree binding enhancements such as the Broadcom 11351
being converted to YAML
- New macro: DEFINE_NOIRQ_DEV_PM_OPS() put to use
- Clean up some SPDX headers
- Handle non-unique devicetree subnode names in two Renesas drivers"
* tag 'pinctrl-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
pinctrl: mlxbf3: Remove gpio_disable_free()
pinctrl: use capital "OR" for multiple licenses in SPDX
dt-bindings: pinctrl: renesas,rza2: Use 'additionalProperties' for child nodes
pinctrl: cherryview: fix address_space_handler() argument
pinctrl: intel: consolidate ACPI dependency
pinctrl: tegra: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: renesas: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: mvebu: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: at91: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: cherryview: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pm: Introduce DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: mediatek: assign functions to configure pin bias on MT7986
pinctrl: mediatek: fix pull_type data for MT7981
dt-bindings: pinctrl: aspeed: Allow only defined pin mux node properties
dt-bindings: pinctrl: Drop 'phandle' properties
pinctrl: lynxpoint: Make use of pm_ptr()
pinctrl: baytrail: Make use of pm_ptr()
pinctrl: intel: Switch to use exported namespace
pinctrl: lynxpoint: reuse common functions from pinctrl-intel
pinctrl: cherryview: reuse common functions from pinctrl-intel
...
Shubhra reports that their laptop is heating up over s2idle. Even though
it's getting into the deepest state, it appears to be having spurious
wakeup events.
While debugging a tangential issue with the RTC Carsten reports that recent
6.1.y based kernel face a similar problem.
Looking at acpidump and GPIO register comparisons these spurious wakeup
events are from the GPIO associated with the I2C touchpad on both laptops
and occur even when the touchpad is not marked as a wake source by the
kernel.
This means that the boot firmware has programmed these bits and because
Linux didn't touch them lead to spurious wakeup events from that GPIO.
To fix this issue, restore most of the code that previously would clear all
the bits associated with wakeup sources. This will allow the kernel to only
program the wake up sources that are necessary.
This is similar to what was done previously; but only the wake bits are
cleared by default instead of interrupts and wake bits. If any other
problems are reported then it may make sense to clear interrupts again too.
Cc: Sachi King <nakato@nakato.io>
Cc: stable@vger.kernel.org
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Fixes: 65f6c7c91c ("pinctrl: amd: Revert "pinctrl: amd: disable and mask interrupts on probe"")
Reported-by: Shubhra Prakash Nandi <email2shubhra@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217754
Reported-by: Carsten Hatger <xmb8dsv4@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217626#c28
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230818144850.1439-1-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Pull pin control updates from Linus Walleij:
"No core changes this time
New drivers:
- Tegra234 support
- Qualcomm IPQ5018 support
- Intel Meteor Lake-S support
- Qualcomm SDX75 subdriver
- Qualcomm SPMI-based PM8953 support
Improvements:
- Fix up support for GPIO3 on the AXP209
- Push-pull drive configuration support for the AT91 PIO4
- Fix misc non-urgent bugs in the AMD driver
- Misc non-urgent improved error handling
- Misc janitorial and minor improvements"
* tag 'pinctrl-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits)
pinctrl: cherryview: Drop goto label
pinctrl: baytrail: invert if condition
pinctrl: baytrail: add warning for BYT_VAL_REG retrieval failure
pinctrl: baytrail: reduce scope of spinlock in ->dbg_show() hook
pinctrl: tegra: avoid duplicate field initializers
dt-bindings: pinctrl: qcom,sdx65-tlmm: add pcie_clkreq function
pinctrl: mlxbf3: remove broken Kconfig 'select'
pinctrl: spear: Remove unused of_gpio.h inclusion
pinctrl: lantiq: Remove unused of_gpio.h inclusion
pinctrl: at91-pio4: check return value of devm_kasprintf()
pinctrl: microchip-sgpio: check return value of devm_kasprintf()
pinctrl: freescale: Fix a memory out of bounds when num_configs is 1
pinctrl: intel: refine ->irq_set_type() hook
pinctrl: intel: refine ->set_mux() hook
pinctrl: baytrail: Use str_hi_lo() helper
lib/string_choices: Add str_high_low() helper
lib/string_helpers: Split out string_choices.h
lib/string_helpers: Add missing header files to MAINTAINERS database
pinctrl: npcm7xx: Add missing check for ioremap
pinctrl:sunplus: Add check for kmalloc
...
To make the GPIO tracking around suspend easier for end users to
use, link it with pm_debug_messages. This will make discovering
sources of spurious GPIOs around suspend easier.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
commit 4e5a04be88 ("pinctrl: amd: disable and mask interrupts on probe")
was well intentioned to mask a firmware issue on a surface laptop, but it
has a few problems:
1. It had a bug in the loop handling for iteration 63 that lead to other
problems with GPIO0 handling.
2. It disables interrupts that are used internally by the SOC but masked
by default.
3. It masked a real firmware problem in some chromebooks that should have
been caught during development but wasn't.
There has been a lot of other development around s2idle; particularly
around handling of the spurious wakeups. If there is still a problem on
the original reported surface laptop it should be avoided by adding a quirk
to gpiolib-acpi for that system instead.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230421120625.3366-5-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
commit 4e5a04be88 ("pinctrl: amd: disable and mask interrupts on probe")
had a mistake in loop iteration 63 that it would clear offset 0xFC instead
of 0x100. Offset 0xFC is actually `WAKE_INT_MASTER_REG`. This was
clearing bits 13 and 15 from the register which significantly changed the
expected handling for some platforms for GPIO0.
commit b26cd9325b ("pinctrl: amd: Disable and mask interrupts on resume")
actually fixed this bug, but lead to regressions on Lenovo Z13 and some
other systems. This is because there was no handling in the driver for bit
15 debounce behavior.
Quoting a public BKDG:
```
EnWinBlueBtn. Read-write. Reset: 0. 0=GPIO0 detect debounced power button;
Power button override is 4 seconds. 1=GPIO0 detect debounced power button
in S3/S5/S0i3, and detect "pressed less than 2 seconds" and "pressed 2~10
seconds" in S0; Power button override is 10 seconds
```
Cross referencing the same master register in Windows it's obvious that
Windows doesn't use debounce values in this configuration. So align the
Linux driver to do this as well. This fixes wake on lid when
WAKE_INT_MASTER_REG is properly programmed.
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217315
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230421120625.3366-2-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Pull pin control updates from Linus Walleij:
"Mostly drivers! Nothing special: some new Qualcomm chips as usual, and
the new NXP S32 and nVidia BlueField-3.
Core changes:
- Make a lot of pin controllers with GPIO and irqchips immutable,
i.e. not living structs, but const structs. This is driving a
changed initiated by the irqchip maintainers.
New drivers:
- New driver for the NXP S32 SoC pin controller
- As part of a thorough cleanup and restructuring of the
Ralink/Mediatek drivers, the Ralink MIPS pin control drivers were
folded into the Mediatek directory and the family is renamed
"mtmips". The Ralink chips live on as Mediatek MIPS family where
new variants can be added. As part of this work also the device
tree bindings were reworked.
- New subdriver for the Qualcomm SM7150 SoC.
- New subdriver for the Qualcomm IPQ9574 SoC.
- New driver for the nVidia BlueField-3 SoC.
- Support for the Qualcomm PMM8654AU mixed signal circuit GPIO.
- Support for the Qualcomm PMI632 mixed signal circuit GPIO.
Improvements:
- Add some missing pins and generic cleanups on the Renesas r8a779g0
and r8a779g0 pin controllers. Generic Renesas extension for power
source selection on several SoCs.
- Misc cleanups for the Atmel AT91 and AT91-PIO4 pin controllers
- Make the GPIO mode work on the Qualcomm SM8550-lpass-lpi driver.
- Several device tree binding cleanups as the binding YAML syntax is
solidifying"
* tag 'pinctrl-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (153 commits)
pinctrl-bcm2835.c: fix race condition when setting gpio dir
dt-bindings: pinctrl: qcom,sm8150: Drop duplicate function value "atest_usb2"
dt-bindings: pinctrl: qcom: Add few missing functions
pinctrl: qcom: spmi-gpio: Add PMI632 support
dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632
pinctrl: wpcm450: select MFD_SYSCON
pinctrl: qcom ssbi-gpio: Convert to immutable irq_chip
pinctrl: qcom ssbi-mpp: Convert to immutable irq_chip
pinctrl: qcom spmi-mpp: Convert to immutable irq_chip
pinctrl: plgpio: Convert to immutable irq_chip
pinctrl: pistachio: Convert to immutable irq_chip
pinctrl: pic32: Convert to immutable irq_chip
pinctrl: sx150x: Convert to immutable irq_chip
pinctrl: stmfx: Convert to immutable irq_chip
pinctrl: st: Convert to immutable irq_chip
pinctrl: mcp23s08: Convert to immutable irq_chip
pinctrl: equilibrium: Convert to immutable irq_chip
pinctrl: npcm7xx: Convert to immutable irq_chip
pinctrl: armada-37xx: Convert to immutable irq_chip
pinctrl: nsp: Convert to immutable irq_chip
...
Pull pin control updates from Linus Walleij:
"Nothing special, notably a lot of new Qualcomm hardware is supported,
a RISC-V reference SoC and then some cleanups both in code and device
tree bindings.
Core changes:
- Add PINCTRL_PINFUNCTION() macro and use it in several drivers
New drivers:
- New driver for the StarFive JH7110 SoC "sys" and "aon" (always-on)
pin controllers. (RISC-V.)
- New subdriver for the Qualcomm QDU1000/QRU1000 SoC pin controller
- New subdrivers for the Qualcomm SM8550 SoC and LPASS pin
controllers
- New subdriver for the Qualcomm SA8775P SoC pin controller
- New subdriver for the Qualcomm IPQ5332 SoC pin controller
- New (trivial) support for Qualcomm PM8550 and PMR735D PMIC pin
control
- New subdriver for the Mediatek MT7981 SoC pin controller
Improvements:
- Several cleanups and refactorings to the Intel drivers
- Add 4KOhm bias support to the Intel driver
- Use the NOIRQ_SYSTEM_SLEEP_PM_OPS for the AT91 driver
- Support general purpose clocks in the Qualcomm MSM8226 SoC
- Several conversions to use the new I2C .probe_new() call
- Massive clean-up of the Qualcomm Device Tree YAML schemas
- Add VIN[45] pins, groups and functions to the Renesas r8a77950 SoC
driver"
* tag 'pinctrl-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (118 commits)
pinctrl: qcom: Add support for i2c specific pull feature
pinctrl: starfive: Add StarFive JH7110 aon controller driver
pinctrl: starfive: Add StarFive JH7110 sys controller driver
dt-bindings: pinctrl: Add StarFive JH7110 aon pinctrl
dt-bindings: pinctrl: Add StarFive JH7110 sys pinctrl
pinctrl: add mt7981 pinctrl driver
dt-bindings: pinctrl: add bindings for MT7981 SoC
dt-bindings: pinctrl: rockchip,pinctrl: mark gpio sub nodes of pinctrl as deprecated
pinctrl: qcom: Introduce IPQ5332 TLMM driver
dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
dt-bindings: pinctrl: qcom: lpass-lpi: correct GPIO name pattern
pinctrl: qcom: pinctrl-sm8550-lpass-lpi: add SM8550 LPASS
dt-bindings: pinctrl: qcom,sm8550-lpass-lpi-pinctrl: add SM8550 LPASS
pinctrl: at91: use devm_kasprintf() to avoid potential leaks
dt-bindings: pinctrl: qcom: correct gpio-ranges in examples
dt-bindings: pinctrl: qcom,msm8994: correct number of GPIOs
dt-bindings: pinctrl: qcom,sdx55: correct GPIO name pattern
dt-bindings: pinctrl: qcom,msm8953: correct GPIO name pattern
dt-bindings: pinctrl: qcom,sm6375: correct GPIO name pattern and example
dt-bindings: pinctrl: qcom,msm8909: correct GPIO name pattern and example
...
Some laptops have been reported to wake up from s2idle when plugging
in the AC adapter or by closing the lid. This is a surprising
behavior that is further clarified by commit cb3e7d624c ("PM:
wakeup: Add extra debugging statement for multiple active IRQs").
With that commit in place the following interaction can be seen
when the lid is closed:
[ 28.946038] PM: suspend-to-idle
[ 28.946083] ACPI: EC: ACPI EC GPE status set
[ 28.946101] ACPI: PM: Rearming ACPI SCI for wakeup
[ 28.950152] Timekeeping suspended for 3.320 seconds
[ 28.950152] PM: Triggering wakeup from IRQ 9
[ 28.950152] ACPI: EC: ACPI EC GPE status set
[ 28.950152] ACPI: EC: ACPI EC GPE dispatched
[ 28.995057] ACPI: EC: ACPI EC work flushed
[ 28.995075] ACPI: PM: Rearming ACPI SCI for wakeup
[ 28.995131] PM: Triggering wakeup from IRQ 9
[ 28.995271] ACPI: EC: ACPI EC GPE status set
[ 28.995291] ACPI: EC: ACPI EC GPE dispatched
[ 29.098556] ACPI: EC: ACPI EC work flushed
[ 29.207020] ACPI: EC: ACPI EC work flushed
[ 29.207037] ACPI: PM: Rearming ACPI SCI for wakeup
[ 29.211095] Timekeeping suspended for 0.739 seconds
[ 29.211095] PM: Triggering wakeup from IRQ 9
[ 29.211079] PM: Triggering wakeup from IRQ 7
[ 29.211095] ACPI: PM: ACPI non-EC GPE wakeup
[ 29.211095] PM: resume from suspend-to-idle
* IRQ9 on this laptop is used for the ACPI SCI.
* IRQ7 on this laptop is used for the GPIO controller.
What has occurred is when the lid was closed the EC woke up the
SoC from it's deepest sleep state and the kernel's s2idle loop
processed all EC events. When it was finished processing EC events,
it checked for any other reasons to wake (break the s2idle loop).
The IRQ for the GPIO controller was active so the loop broke, and
then this IRQ was processed. This is not a kernel bug but it is
certainly a surprising behavior, and to better debug it we should
have a dynamic debugging message that we can enact to catch it.
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20221013134729.5592-2-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Pull interrupt updates from Thomas Gleixner:
"Core code:
- Provide a generic wrapper which can be utilized in drivers to
handle the problem of force threaded demultiplex interrupts on RT
enabled kernels. This avoids conditionals and horrible quirks in
drivers all over the place
- Fix up affected pinctrl and GPIO drivers to make them cleanly RT
safe
Interrupt drivers:
- A new driver for the FSL MU platform specific MSI implementation
- Make irqchip_init() available for pure ACPI based systems
- Provide a functional DT binding for the Realtek RTL interrupt chip
- The usual DT updates and small code improvements all over the
place"
* tag 'irq-core-2022-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
irqchip: IMX_MU_MSI should depend on ARCH_MXC
irqchip/imx-mu-msi: Fix wrong register offset for 8ulp
irqchip/ls-extirq: Fix invalid wait context by avoiding to use regmap
dt-bindings: irqchip: Describe the IMX MU block as a MSI controller
irqchip: Add IMX MU MSI controller driver
dt-bindings: irqchip: renesas,irqc: Add r8a779g0 support
irqchip/gic-v3: Fix typo in comment
dt-bindings: interrupt-controller: ti,sci-intr: Fix missing reg property in the binding
dt-bindings: irqchip: ti,sci-inta: Fix warning for missing #interrupt-cells
irqchip: Allow extra fields to be passed to IRQCHIP_PLATFORM_DRIVER_END
platform-msi: Export symbol platform_msi_create_irq_domain()
irqchip/realtek-rtl: use parent interrupts
dt-bindings: interrupt-controller: realtek,rtl-intc: require parents
irqchip/realtek-rtl: use irq_domain_add_linear()
irqchip: Make irqchip_init() usable on pure ACPI systems
bcma: gpio: Use generic_handle_irq_safe()
gpio: mlxbf2: Use generic_handle_irq_safe()
platform/x86: intel_int0002_vgpio: Use generic_handle_irq_safe()
ssb: gpio: Use generic_handle_irq_safe()
pinctrl: amd: Use generic_handle_irq_safe()
...
On PREEMPT_RT enabled kernels the demultiplex interrupt handler is force
threaded and runs with interrupts enabled. The invocation of
generic_handle_domain_irq() with interrupts enabled triggers a lockdep
warning due to a non-irq safe lock acquisition.
Instead of disabling interrupts on the driver level, use
generic_handle_domain_irq_safe().
[ tglx: Split out from combo patch ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/YnkfWFzvusFFktSt@linutronix.de
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215954
The output is currently split across two lines making it more
difficult to parse unless the newlines are removed between pins
or it's read in by a parser like Libreoffice Calc or Google docs.
To make it easier to follow to the naked eye in a terminal window:
* drop the newline in the middle of pin definitions
* shorten all output using unicode characters
* align all pipe delimitters
* output the same phrase even for disabled functions
(but with a ∅ character)
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220722220810.28894-2-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
