Pull i2c updates from Wolfram Sang:
"Core updates:
- move towards using the 'fwnode' handle instead of 'of_node'
(meaning 'of_node' even gets removed from i2c_board_info)
- add support for Write Disable-aware SPD eeproms
- minor stuff (use new helpers, typo fixes)
i2c-atr (address translator) updates:
- support per-channel alias pools
- added support for dynamic address translation (also adds FPC202
driver as its user)
- add 'static' and 'passthrough' flags
Cleanups and refactorings
- Many drivers switched to dev_err_probe()
- Generic cleanups applied to designware, iproc, ismt, mlxbf,
npcm7xx, qcom-geni, pasemi, and thunderx
- davinci: declare I2C mangling support among I2C features
- designware: clean up DTS handling
- designware: fix PM runtime on driver unregister
- imx: improve error logging during probe
- lpc2k: improve checks in probe error path
- xgene-slimpro: improve PCC shared memory handling
- pasemi: improve error handling in reset, smbus clear, timeouts
- tegra: validate buffer length during transfers
- wmt: convert binding to YAML format
Improvements and extended support:
- microchip-core: add SMBus support
- mlxbf: add support for repeated start in block transfers
- mlxbf: improve timer configuration
- npcm: attempt clock toggle recovery before failing init
- octeon: add support for block mode operations
- pasemi: add support for unjam device feature
- riic: add support for bus recovery
New device support:
- MediaTek Dimensity 1200 (MT6893)
- Sophgo SG2044
- Renesas RZ/V2N (R9A09G056)
- Rockchip RK3528
- AMD ISP (new driver)"
* tag 'i2c-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (89 commits)
i2c: Use str_read_write() helper
i2c: mlxbf: avoid 64-bit division
i2c: viai2c-wmt: Replace dev_err() with dev_err_probe() in probe function
i2c: designware: Don't warn about missing get_clk_rate_khz
i2c: designware: Invoke runtime suspend on quick slave re-registration
i2c-mlxbf: Improve I2C bus timing configuration
i2c-mlxbf: Add repeated start condition support
i2c: xgene-slimpro: Replace dev_err() with dev_err_probe() in probe function
dt-bindings: i2c: i2c-wmt: Convert to YAML
i2c: microchip-corei2c: add smbus support
i2c: mlxbf: Allow build with COMPILE_TEST
i2c: I2C_DESIGNWARE_AMDISP should depend on DRM_AMD_ISP
i2c: atr: add passthrough flag
i2c: atr: add static flag
i2c: atr: allow replacing mappings in attach_addr()
i2c: atr: deduplicate logic in attach_addr()
i2c: atr: do not create mapping in detach_addr()
i2c: atr: split up i2c_atr_get_mapping_by_addr()
i2c: atr: find_mapping() -> get_mapping()
i2c: atr: Fix lockdep for nested ATRs
...
Pull media updates from Mauro Carvalho Chehab:
- v4l2-core fix: V4L2_BUF_TYPE_VIDEO_OVERLAY is capture, not output
- New driver: Amlogic C3 ISP
- New sensor drivers: ST VD55G1 and VD56G3, OmniVision OV02C10
- amlogic: c3-mipi-csi2: Handle 64-bits division
- a fix for 64-bits division at the amlogic c3-mipi-csi2 driver
- Changes at atomisp to support mainline mt9m114 driver and remove
deprecated GPIO APIs
- various cleanups, fixes and enhancements
* tag 'media/v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (314 commits)
media: rkvdec: h264: Support High 10 and 4:2:2 profiles
media: rkvdec: Add get_image_fmt ops
media: rkvdec: Initialize the m2m context before the controls
media: rkvdec: h264: Limit minimum profile to constrained baseline
media: mediatek: jpeg: support 34bits
media: verisilicon: Free post processor buffers on error
media: platform: mtk-mdp3: Remove unused mdp_get_plat_device
media: amlogic: c3-mipi-csi2: Handle 64-bits division
media: uvcvideo: Use dev_err_probe for devm_gpiod_get_optional
media: uvcvideo: Fix deferred probing error
media: uvcvideo: Rollback non processed entities on error
media: uvcvideo: Send control events for partial succeeds
media: uvcvideo: Return the number of processed controls
media: uvcvideo: Do not turn on the camera for some ioctls
media: uvcvideo: Make power management granular
media: uvcvideo: Increase/decrease the PM counter per IOCTL
media: uvcvideo: Create uvc_pm_(get|put) functions
media: uvcvideo: Keep streaming state in the file handle
Documentation: media: Add documentation file c3-isp.rst
Documentation: media: Add documentation file metafmt-c3-isp.rst
...
Some I2C ATRs do not support dynamic remapping, only static mapping
of direct children.
Mappings will only be added or removed as a result of devices being
added or removed from a child bus.
The ATR pool will have to be big enough to accommodate all devices
expected to be added to the child buses.
Add a new flag that prevents old mappings to be replaced or new mappings
to be created in the alias finding code paths. That mens adding a flags
parameter to i2c_atr_new() and an i2c_atr_flags enum.
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
In commit cfa49ff055 ("media: i2c: imx335: Support 2592x1940 10-bit
mode") the IMX335 driver was extended to support multiple output
bitdepth modes.
This incorrectly extended the frame size enumeration to check against
the supported mbus_codes array instead of the supported mode/frame
array. This has the unwanted side effect of reporting the currently
supported frame size 2592x1944 three times.
Fix the check accordingly to report a frame size for each supported
size, which is presently only a single entry.
Fixes: cfa49ff055 ("media: i2c: imx335: Support 2592x1940 10-bit mode")
Cc: stable@vger.kernel.org
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use the v4l2_find_nearest_size_conditional() helper to figure out which
drive-supported lane can be used on a given system.
Also avoid exposing duplicate frame sizes to userspace when multiple
modes share the same resolution but differ in lane count.
Signed-off-by: Jason Chen <jason.z.chen@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use the v4l2_link_freq_to_bitmap() helper to figure out which
driver-supported link frequencies can be used on a given system.
Signed-off-by: Jason Chen <jason.z.chen@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: drop unused variable 'max']
Prepare for refactoring register table by removing register entries
that are common across all modes from resolution-specific table
These will be moved into a shared common register array in the next commit.
Signed-off-by: Jason Chen <jason.z.chen@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
To prepare upcoming support of multiple sensor modes,
this change separates the lane configuration and PLL settings
from the original mode-specific settings.
Signed-off-by: Jason Chen <jason.z.chen@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
1. Fix pixel rate calculation to consider different lane number
2. Add 2104x1560 60fps 2 data lanes register setting
3. Support 2 lane in check_hwcfg
4. Select correct mode considering lane number used
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Hao Yao <hao.yao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Pixel per line (PPL) is calculated as pixel_rate / (VTS * FPS), which
is not decided by MIPI CSI-2 link frequency. PPL can vary while link
frequency keeps the same. If PPL is wrong, the h_blank = PPL - width
is also wrong then FPS control is inaccurate.
This patch fix h_blank by:
1. Move PPL from link_freq_config to ov13b10_mode
2. Add PPL value for different modes
3. Use PPL from mode to calculate h_blank
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Hao Yao <hao.yao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The fwnode.h is not supposed to be used by the drivers as it
has the definitions for the core parts for different device
property provider implementations. Drop it.
Note, that fwnode API for drivers is provided in property.h
which is included here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The fwnode.h is not supposed to be used by the drivers as it
has the definitions for the core parts for different device
property provider implementations. Drop it.
Note, that fwnode API for drivers is provided in property.h
which is included here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Julien Massot <julien.massot@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
When the VT tree calculation fails to find a valid pre-divider, the
ccs_pll_calculate_vt_tree() function returns an error silently, and the
caller doesn't print any message either. This makes debugging PLL
calculation issues more difficult. Add a debug message to report the
issue, and amend the corresponding message for the OP tree to mention
"OP".
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Probe deferral should not be logged as an error:
ov8856 24-0010: failed to get HW configuration: -517
Use dev_err_probe() for the clock lookup and drop the (mostly) redundant
dev_err() from sensor probe() to suppress it.
Note that errors during regulator lookup is already correctly logged
using dev_err_probe().
Fixes: 0c2c7a1e0d ("media: ov8856: Add devicetree support")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Probe deferral should not be logged as an error:
ov5675 24-0010: failed to get HW configuration: -517
Drop the (mostly) redundant dev_err() from sensor probe() to suppress
it.
Note that errors during clock and regulator lookup are already correctly
logged using dev_err_probe().
Fixes: 49d9ad719e ("media: ov5675: add device-tree support and support runtime PM")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Lt6911uxe is used in IPU6 / x86 platform, worked with an out-of-tree
int3472 patch and upstream intel/ipu6 before. It is only used on ACPI
platforms till now and there are no devicetree bindings for this
driver.
The upstream int3472 driver uses "hpd" instead of "readystat" now.
this patch updates the irq_gpio name to "hpd" accordingly, so that
mere users can now use the upstream version directly without relying
on out-of-tree int3472 pin support.
The new name "hpd" (Hotplug Detect) aligns with common naming
conventions used in other drivers(like adv7604) and documentation.
Fixes: e49563c3be ("media: i2c: add lt6911uxe hdmi bridge driver")
Cc: stable@vger.kernel.org
Signed-off-by: Dongcheng Yan <dongcheng.yan@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The VD55G1 is a monochrome global shutter camera with a 804x704 maximum
resolution with RAW8 and RAW10 bytes per pixel.
The driver supports :
- Auto exposure from the sensor, or manual exposure mode
- HDR subtraction mode, allowing edge detection and background removal
- Auto exposure cold start, using configuration values from last stream
to start the next one
- LED GPIOs for illumination
- Most standard camera sensor features (hblank, vblank, test patterns,
again, dgain, hflip, vflip, auto exposure bias, etc.)
Add driver source code to MAINTAINERS file.
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add V4L2 sub-device driver for STMicroelectronics VD56G3 camera sensor.
This is a 1.5 M pixel global shutter image sensor with an active array
size of 1124 x 1364 (portrait orientation).
The driver supports Mono (VD56G3) and Color (VD66GY) variants.
Signed-off-by: Sylvain Petinot <sylvain.petinot@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Replace the custom mutex in the imx334 driver with the V4L2 subdev state
lock for control synchronization. Initialize the subdev with
v4l2_subdev_init_finalize in imx334_probe, adding proper cleanup in error
paths and imx334_remove. This aligns the driver with V4L2 standards.
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Runtime PM is fully initialized before calling
v4l2_async_register_subdev_sensor(). Moving the runtime PM initialization
earlier prevents potential access to an uninitialized or powered-down
device.
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
pm_runtime_suspended() only checks the current runtime PM status and does
not modify it, making it ineffective in this context. This could result in
improper power management if the device remains active when removed.
This patch fixes the issue by introducing a check with
pm_runtime_status_suspended() to determine if the device is already
suspended. If it is not, it calls imx334_power_off() to power down the
device and then uses pm_runtime_set_suspended() to correctly update the
runtime PM status to suspended.
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Some controls may need the sensor to be powered on to update their
values. Currently, only the exposure control does this. To ensure
proper handling, the power-up sequence is moved outside the switch-case.
Additionally, VBLANK control is now processed earlier so its changes
can correctly affect other controls.
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Configure the lane mode dynamically from the streaming
function instead of using a hardcoded value.
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
[Sakari Ailus: Fix checkpatch.pl issue, lower Dynamically.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The clock frequency is often available via the clock itself and not read
by the driver from the "clock-frequency" property. Don't complain if the
property doesn't exist.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Generally any deviance from the standard is handled via CCS static data
nowadays and so not having quirks is expected. Don't warn about it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The I²C retry hack has been there in order to address transient I²C
register write access issues on a few very old sensors and possibly it has
addressed also first I²C access problems (device not responding until a
certain amount of time has passed) but that is now separately handled. The
retry hack has a good potential for introducing hard to debug problems in
updating sensor settings while streaming. Remove it and instead pass those
rare errors to the user space -- which is also what virtually all other
drivers do.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use read_poll_timeout() in polling the device after a reset, either hard
or soft. While at it, improve the related error message.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Some sensors take longer to respond after reset than the spec-required
time. Try up to 1 s for the sensor to become accessible.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use pm_runtime_put_autosuspend() instead of pm_runtime_put()
to allow autosuspend. Set a 1000ms autosuspend delay in
imx219_probe() to improve power efficiency.
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
