Return failures from parse_dmc_fw() instead of relying on
intel_dmc_has_payload(). Handle and error report them slightly better,
including a new error message for when the firmware does not contain the
main program.
v2: Print specific error message for payload not found (Gustavo)
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/18833681978ec3ac779cce943221cc5b532c7c45.1713519628.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Clarify request_firmware() error handling. Don't proceed to trying to
parse non-existent firmware or check for payload when request_firmware()
failed to begin with. There's no reason to release_firmware() either
when request_firmware() failed.
Also move the message about DMC firmware homepage here, as in other
cases the user probably has some firmware, although its parsing fails
for some reason.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0654bb3480f8d2103225d26f665badead5495532.1713519628.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
drm-misc-next for v6.10-rc1:
UAPI Changes:
- Add SIZE_HINTS property for cursor planes.
Cross-subsystem Changes:
Core Changes:
- Document the requirements and expectations of adding new
driver-specific properties.
- Assorted small fixes to ttm.
- More Kconfig fixes.
- Add struct drm_edid_product_id and helpers.
- Use drm device based logging in more drm functions.
- Fixes for drm-panic, and option to test it.
- Assorted small fixes and updates to edid.
- Add drm_crtc_vblank_crtc and use it in vkms, nouveau.
Driver Changes:
- Assorted small fixes and improvements to bridge/imx8mp-hdmi-tx, nouveau, ast, qaic, lima, vc4, bridge/anx7625, mipi-dsi.
- Add drm panic to simpledrm, mgag200, imx, ast.
- Use dev_err_probe in bridge/panel drivers.
- Add Innolux G121X1-L03, LG sw43408 panels.
- Use struct drm_edid in i915 bios parsing.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2dc1b7c6-1743-4ddd-ad42-36f700234fbe@linux.intel.com
Add consistent definitions for the per-lane PHY TX registers
on bxt/glk. The current situation is a slight mess with some
registers having a LN0 define, while others have a parametrized
per-lane definition.
v2: Adjust gvt accordingly
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417151211.32135-1-ville.syrjala@linux.intel.com
Enabling the 5k@60Hz uncompressed mode on the MediaTek/Dell U3224KBA
monitor results in a blank screen, at least on MTL platforms on UHBR
link rates with some (<30) uncompressed bpp values. Enabling compression
fixes the problem, so do that for now. Windows enables DSC always if the
sink supports it and forcing it to enable the mode without compression
leads to the same problem above (which suggests a panel issue with
uncompressed mode).
The same 5k mode on non-UHBR link rates is not affected and lower
resolution modes are not affected either. The problem is similar to the
one fixed by the HBLANK expansion quirk on Synaptics hubs, with the
difference that the problematic mode has a longer HBLANK duration. Also
the monitor doesn't report supporting HBLANK expansion; either its
internal MST hub does the expansion internally - similarly to the
Synaptics hub - or the issue has another root cause, but still related
to the mode's short HBLANK duration. Enable the quirk for the monitor
adjusting the detection for the above differences.
v2: Rebase on drm_dp_128132b_supported() change.
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417142217.457902-1-imre.deak@intel.com
The DPCD OUI of the logical port on a Dell UHBR monitor - on which the
AUX device is used to enable DSC - is all 0. To detect if the HBLANK
expansion quirk is required for this monitor use the OUI of the port's
parent instead.
Since in the above case the DPCD of both the logical port and the parent
port reports being a sink device (vs. branch device) type, read the
proper sink/branch OUI based on the DPCD device type.
This is required by a follow-up patch enabling the quirk for the above
Dell monitor.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-11-imre.deak@intel.com
Factor out a function to check for 128b/132b channel coding support used
by a follow-up patch in the patchset.
v2: s/drm_dp_uhbr_channel_coding_supported()/drm_dp128b132b_supported()
(Jani)
Cc: dri-devel@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417141936.457796-1-imre.deak@intel.com
Instead of checking each compressed bpp value against the maximum
DSC/DPT bpp, simplify things by calculating the maximum bpp upfront and
limiting the range of bpps looped over using this maximum.
While at it add a comment about the origin of the DSC/DPT bpp limit.
Bspec: 49259, 68912
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-7-imre.deak@intel.com
The DSC DPT interface BW limit check should take into account the link
clock's (aka DDI clock in bspec) channel coding efficiency overhead.
Bspec suggests that the FEC overhead needs to be applied, however HW
people claim this isn't the case, nor is any overhead applicable.
However based on testing various 5k/6k modes both on the DELL U3224KBA
monitor and the Unigraf UCD-500 CTS test device, both the channel coding
efficiency (which includes the FEC overhead) and an additional 3%
overhead must be accounted for to get these modes working.
Bspec: 49259
v2:
- Apply an additional 3% overhead, add a commit log and code comment
about these overheads and the relation to the Bspec BW limit formula.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-5-imre.deak@intel.com
The expected link symbol clock unit when calculating the DSC DPT bpp
limit is kSymbols/sec, aligning with the dotclock's kPixels/sec unit
based on the crtc clock. As opposed to this port_clock is used - which
has a 10 kbits/sec unit - with the resulting symbol clock in 10
kSymbols/sec units (disregarding the rounding error for the 13.5Gbps
rate). Fix the calculation using the expected 10x factor.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-3-imre.deak@intel.com
Fix the calculation of the DSC line buffer depth. This is limited both
by the source's and sink's maximum line buffer depth, but the former one
was not taken into account. On all Intel platform's the source's maximum
buffer depth is 13, so the overall limit is simply the minimum of the
source/sink's limit, regardless of the DSC version.
This leaves the DSI DSC line buffer depth calculation as-is, trusting
VBT.
On DSC version 1.2 for sinks reporting a maximum line buffer depth of 16
the line buffer depth was incorrectly programmed as 0, leading to a
corruption in color gradients / lines on the decompressed screen image.
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-2-imre.deak@intel.com
The current intel_bw_atomic_check do not check the possbility
of a sagv configuration change after the hw state readout.
Hence cannot update the sagv configuration until some other
relevant changes like data rates, number of planes etc. happen.
Introduce a flag to force qgv check in such cases.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-7-vinod.govindapillai@intel.com
There could be multiple qgv and psf gv points with similar values.
Apparently pcode's handling of psf and qgv points are different. For
qgv case, pcode sets whatever is asked by the driver. But in case
of psf gv points, it compares the bw from points before setting the
mask. This can cause problems in scenarios where we have to disable
sagv by setting the highest bw point and there could be multiple
points with highest bw. So to set the maximum psf gv point, find
out all the points with the highest bw and set all together.
v1: - use the same treatment to qgv points as well (Vinod)
v2: - pcode confirms that for qgv points, it sets whatever the
driver sets (Vinod)
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-6-vinod.govindapillai@intel.com
Problem is that on some platforms, we do get QGV point mask in wrong
state on boot. However driver assumes it is set to 0
(i.e all points allowed), however in reality we might get them all
restricted, causing issues.
Lets disable SAGV initially to force proper QGV point state.
If more QGV points are available, driver will recalculate and update
those then after next commit.
v2: - Added trace to see which QGV/PSF GV point is used when SAGV is
disabled.
v3: - Move force disable function to intel_bw_init in order to initialize
bw state as well, so that hw/sw are immediately in sync after init.
v4: - Don't try sending PCode request, seems like it is not possible at
intel_bw_init, however assigning bw->state to be restricted as if
SAGV is off, still forces driveer to send PCode request anyway on
next modeset, so the solution still works.
However we still need to address the case, when no display is
connected, which anyway requires much more changes.
v5: - Put PCode request back and apply temporary hack to make the
request succeed(in case if there 2 PSF GV points with same BW, PCode
accepts only if both points are restricted/unrestricted same time)
- Fix argument sequence for adl_qgv_bw(Ville Syrjälä)
v6: - Fix wrong platform checks, not to break everything else.
v7: - Split the handling of quplicate QGV/PSF GV points (Vinod)
Restrict force disable to display version below 14 (Vinod)
v8: - Simplify icl_force_disable_sagv (Vinod)
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-5-vinod.govindapillai@intel.com
We need that in order to force disable SAGV in next patch.
Also it is beneficial to separate that code, as in majority cases,
when SAGV is enabled, we don't even need those calculations.
Also we probably need to determine max PSF GV point as well, however
currently we don't do that when we disable SAGV, which might be
actually causing some issues in that case.
v2: - Introduce helper adl_qgv_bw(counterpart to adl_psf_bw)
(Ville Syrjälä)
- Don't restrict psf gv points for SAGV disable case
(Ville Syrjälä)
v3: - Update icl_max_bw_qgv_point_mask to return max qgv point
mask (Vinod)
v4: - Minor changes in icl_find_qgv_points (Vinod)
v5: - use max_bw_point instead of max_bw_point_mask (stan)
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-3-vinod.govindapillai@intel.com
For debug purposes we need those - error path won't flood the log,
however there has been already numerous cases, when due to lack
of debugs, we couldn't immediately tell what was the problem on
customer machine, which slowed down the investigation, requiring
to get access to target device and adding those traces manually.
v2: - Make the debug more generic and move it to intel_dram_detect
(Gustavo Sousa)
v3: - Use %u for unsigned variable in debug prints (Gustavo)
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-2-vinod.govindapillai@intel.com
In the past, the noresume function was used by the GEM code to ensure
wakelocks were held and bump its usage. This is no longer the case
and this function was totally unused until it started to be used again
by display with commit 77e619a82f ("drm/i915/display: convert inner
wakeref get towards get_if_in_use")
However, on the display code, most of the callers are using the
raw wakeref, rather then the wakelock version. What caused a
major regression caught by CI.
Another option to this patch is to go with the original plan and
use the get_if_in_use variant in the display code, what is enough
to fulfil our needs. Then, an extra patch to delete the unused
_noresume variant.
v2: Keep grabbing wakelock but only assert for wakeref. (Imre)
Cc: Imre Deak <imre.deak@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 77e619a82f ("drm/i915/display: convert inner wakeref get towards get_if_in_use")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10875
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240418223756.68427-1-rodrigo.vivi@intel.com
It would be too much noise to convert the intel_de_* functions from
using struct drm_i915_private to struct intel_display all at once. Add
generic wrappers using __to_intel_display() to accept both.
v2: Take the intel_dmc_wl_* changes into account
Cc: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1b0e8e7c732535e18c8498a2e18fe1e4c123e2f5.1713358679.git.jani.nikula@intel.com
Add generic __to_intel_display() macro that accepts either struct
drm_i915_private * or struct intel_display *. This is to be used for
transitional stuff that eventually needs to be converted to use struct
intel_display *, and therefore is not part of to_intel_display().
Add new intel_display_conversion.h to host the helper to avoid
duplication between xe and i915 drivers.
v2: put it in the new header (Rodrigo)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a999ff8183659a4df68d439ebd31c19b5c56852a.1713358679.git.jani.nikula@intel.com
Convert various pointers to struct intel_display * using _Generic().
Add some macro magic to make adding new conversions easier, and somewhat
abstract the need to cast each generic association. The cast is required
because all associations needs to compile, regardless of the type and
the generic selection.
The use of *p in the generic selection assignment expression removes the
need to add separate associations for const pointers.
Note: This intentionally does *not* cover struct drm_i915_private or
struct xe_device. They are not to be used in the long run, so avoid
using this macro for them.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/02cf407961200db4379370856c779ea62b3eaa90.1713358679.git.jani.nikula@intel.com
This patch brings no functional change. Since at this point of
the code we are already asserting a wakeref was held, it means
that we are with runtime_pm 'in_use' and in practical terms we
are only bumping the pm_runtime usage counter and moving on.
However, xe driver has a lockdep annotation that warned us that
if a sync resume was actually called at this point, we could have
a deadlock because we are inside the power_domains->lock locked
area and the resume would call the irq_reset, which would also
try to get the power_domains->lock.
For this reason, let's convert this call to a safer option and
calm lockdep on.
v2: use _noresume variant instead of get_in_use (Ville, Imre)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-3-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The pipes that can be used for eDP MSO are limited to pipe A (and
sometimes also pipe B) only for display version 20 and below.
Modify the function that returns the pipe mask for eDP MSO so that
these limitations only apply to version 20 and below, enabling all
pipes otherwise.
Bspec: 68923
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404091646.165309-1-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
For some reason the snps/cx0 PLL states were added into
a union alongside dpll_hw_state. Just suck them into
dpll_hw_state so that we don't have so many levels of
unions/etc.
TODO: Get rid of 'clock' from the snps/cx0 PLL states
as it is not a register values and thus doesn't
belong there
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-19-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
intel_dpll_hw_state contains space for all possible PLL
register values across all platforms. That is rather wasteful
as each machine only needs to store the registers values
that are appropriate for the platform.
Turn intel_dpll_hw_state into a union so that we don't
waste memory for the register values of other platforms.
And let's use an anonymous union so that we don't have
to do tons of s/struct/union/ all over the place.
pahole:
struct intel_dpll_hw_state {
- struct i9xx_dpll_hw_state i9xx; /* 0 16 */
- struct hsw_dpll_hw_state hsw; /* 16 8 */
- struct skl_dpll_hw_state skl; /* 24 12 */
- struct bxt_dpll_hw_state bxt; /* 36 44 */
- /* --- cacheline 1 boundary (64 bytes) was 16 bytes ago --- */
- struct icl_dpll_hw_state icl; /* 80 60 */
+ union {
+ struct i9xx_dpll_hw_state i9xx; /* 0 16 */
+ struct hsw_dpll_hw_state hsw; /* 0 8 */
+ struct skl_dpll_hw_state skl; /* 0 12 */
+ struct bxt_dpll_hw_state bxt; /* 0 44 */
+ struct icl_dpll_hw_state icl; /* 0 60 */
+ }; /* 0 60 */
- /* size: 140, cachelines: 3, members: 5 */
- /* last cacheline: 12 bytes */
+ /* size: 60, cachelines: 1, members: 1 */
+ /* last cacheline: 60 bytes */
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-18-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
struct intel_dpll_hw_state has a spot for all possible
PLL registers across all platforms (well, apart from
cx0/snps). This makes it rather confusing when trying to
figure out which members belong to which platform(s).
Split the struct up into five different platform specific
sub-structures. For now this will actually increase the size
a little bit as we have to duplicate a few members from
skl to icl, but that will be remedied soon when we turn
the thing into a union.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-17-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The *_compute_dpll() functions generally contain
two things:
- huge pile of inline code to calculate the DPLL
register value
- a few calls to helpers to calculate the
DPLL_MD and FP register values
Pull the DPLL register value calculations into a helpers
as well, so that *_compute_dpll() can focus on higher
level tasks.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-11-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Stop rummaging around inside pll->state directly in the low
level pll->enable() functions, and instead let the higher level
code figure out where the correct state is stored and pass it in.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Spinkle local PLL hw_state variables into various low
level PLL functions. Will make subsequent changes cleaner
when we don't have to touch so many places when renaming
struct members and whatnot.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We have zero consistency in out PLL state naming scheme. Try
to unify things a bit by using 'dpll_hw_state' for high level
stuff and just 'hw_state' for low level stuff. Currently both
are the same, but I want to unionize intel_dpll_hw_state at
which point using different names can make it more clear whether
we're talking about the whole union or just the embedded platform
specific struct.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We only need DMC wakelocks when we allow DC5 and DC6 states. Add the
calls to enable and disable DMC wakelock accordingly.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412094148.808179-5-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This feature should be disabled by default until properly tested and
mature. Add a module parameter to enable the feature for testing,
while keeping it disabled by default for now.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412094148.808179-4-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Only allow running DMC wakelock code if the display version is 20 or
greater. Also check if DMC is loaded before enabling.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412094148.808179-3-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In order to reduce the DC5->DC2 restore time, wakelocks have been
introduced in DMC so the driver can tell it when registers and other
memory areas are going to be accessed and keep their respective blocks
awake.
Implement this in the driver by adding the concept of DMC wakelocks.
When the driver needs to access memory which lies inside pre-defined
ranges, it will tell DMC to set the wakelock, access the memory, then
wait for a while and clear the wakelock.
The wakelock state is protected in the driver with spinlocks to
prevent concurrency issues.
BSpec: 71583
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412094148.808179-2-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
To avoid accessing and parsing the raw EDID with drm_edid_raw(), switch
to the struct drm_edid based function to extract product id, and use the
drm printer function to debug log it.
The underlying assumption is that struct drm_edid_product_id and struct
lvds_pnp_id describe identical data, albeit with slightly different
member definitions.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ec5148dd43221b32cb2066bc7fd264a069c1188b.1712655867.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd04.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
We need bigjoiner support with MST functionality
for MST monitor resolutions > 5K to work.
Adding support for the same.
v2: Addressed review comments from Jani.
Revert rejection of MST bigjoiner modes and add
functionality
v3: Fixed pipe_mismatch WARN for mst_master_transcoder
Credits-to: Manasi Navare <navaremanasi@chromium.org>
v4: Utilize intel_crtc_joined_pipe_mask() also for handling
bigjoiner slave pipes for MST case(Stan)
[v5: vsyrjala: chunked the modeset squence stuff out,
removed bogus mst master transcoder hack,
keep mgr_lock near the full_pbn check]
[v6: vsyrjala: Calculate DSC slices correctly for bigjoiner (Imre)]
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Co-developed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163502.29633-7-ville.syrjala@linux.intel.com
Loop over all joined pipes at relevant points in the MST
modeset sequence.
Carved out from Vidya's earlier big patch, with naming/etc.
changed to match the earlier hsw_crtc_enable() stuff.
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Co-developed-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163502.29633-6-ville.syrjala@linux.intel.com
Handle only bigjoiner masters in skl_commit_modeset_enables/disables,
slave crtcs should be handled by master hooks. Same for encoders.
That way we can also remove a bunch of checks like intel_crtc_is_bigjoiner_slave.
v2: - Moved skl_pfit_enable, intel_dsc_enable, intel_crtc_vblank_on to intel_enable_ddi,
so that it is now finally symmetrical with the disable case, because currently
for some weird reason we are calling those from skl_commit_modeset_enables, while
for the disable case those are called from the ddi disable hooks.
v3: - Create intel_ddi_enable_hdmi_or_sst symmetrical to
intel_ddi_post_disable_hdmi_or_sst and move it also under non-mst check.
v4: - Fix intel_enable_ddi sequence
- Call intel_crtc_update_active_timings for slave pipes as well
[v5: vsyrjala: Use the name 'pipe_crtc' for the per-pipe crtc pointer
Use consistent style and naming
Protect macro arguments properly
Drop superfluous changes to the modeset sequence,
this now follows the old non-joiner sequence 100%
apart from just looping in places]
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Manasi Navare <navaremanasi@chromium.org> #v4?
Co-developed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163502.29633-5-ville.syrjala@linux.intel.com
Reorganize the crtc disable path to only deal with the
master pipes/transcoders in intel_old_crtc_state_disables()
and offload the handling of joined pipes to hsw_crtc_disable().
This makes the whole thing much more sensible since we can
actually control the order in which we do the per-pipe vs.
per-transcoder modeset steps.
v2: Use the name 'pipe_crtc' for the per-pipe crtc pointer
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163502.29633-4-ville.syrjala@linux.intel.com
Unify the master vs. slave handling in
intel_ddi_post_disable_hdmi_or_sst() by looping over all the
pipes in one go.
This also lets us move the intel_crtc_vblank_off() calls to
happen in a consistent place vs. the transcoder disable.
Previously we did the master vs. slaves on different sides
of that.
v2: Use the name 'pipe_crtc' for the per-pipe crtc pointer
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163502.29633-3-ville.syrjala@linux.intel.com
Extract the "not-MST" stuff from intel_ddi_post_disable() so that
the whole thing isn't so cluttered.
The bigjoiner slave handling was outside of the !MST check,
but it really should have been inside it as its the counterpart
to the master handling inside the check. So we pull that
in as well. There is no functional change here as we don't
currently support bigjoiner+MST anyway.
v2: Rebase
v3: Actually extract the slave code as claimed in
the commit message (presumably a rebase fail in v2)
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163502.29633-2-ville.syrjala@linux.intel.com
Advertize more suitable cursor sizes via the new SIZE_HINTS
plane property.
We can't really enumerate all supported cursor sizes on
the platforms where the cursor height can vary freely, so
for simplicity we'll just expose all square+POT sizes between
each platform's min and max cursor limits.
Depending on the platform this will give us one of three
results:
- 64x64,128x128,256x256,512x512
- 64x64,128x128,256x256
- 64x64
Cc: Simon Ser <contact@emersion.fr>
Cc: Jonas Ådahl <jadahl@redhat.com>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Sameer Lattannavar <sameer.lattannavar@intel.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240318204408.9687-3-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Add a workaround to fix BS (blank start) to BS jitter fixes on non-UHBR
MST/FEC and UHBR links. Bspec doesn't provide an actual WA ID for this.
Bspec: 65448, 50054
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240129175533.904590-7-imre.deak@intel.com
Disable the workaround inserting an SF symbol between the last DSC EOC
symbol and the subsequent BS symbol. The WA is enabled by default -
based on the register's reset value - and Bspec requires disabling it
explicitly. Bspec doesn't provide an actual WA ID for this.
Bspec: 50054, 65448, 68849
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240129175533.904590-6-imre.deak@intel.com
Add a workaround to fix timing issues on links with DSC enabled -
presumedly related to the audio functionality.
Bspec requires enabling this workaround if audio is enabled on ADLP,
however Windows enables it whenever DSC is enabled ADLP onwards; follow
Windows.
Bspec: 50490, 55424
v2: Fix WA code comment formatting. (Ankit)
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240129175533.904590-5-imre.deak@intel.com
Add a workaround to fix BS jitter issues on MST links if the HBLANK
period is less than 1 MTP. The WA applies only to UHBR rates while on
non-UHBR the specification requires disabling it explicitly - presumedly
because the register's reset value has the WA enabled.
Bspec: 50050, 55424
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240129175533.904590-3-imre.deak@intel.com
Add a workaround to fix BS (blank start) to BS jitter issues on MST
links when FEC is enabled. Neither Bspec requires this nor Windows
clears the WA when disabling the output - presumedly because
CHICKEN_MISC_3 gets reset after disabling the pipe/transcoder - so
follow suit.
Bspec: 50050, 55424
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240129175533.904590-2-imre.deak@intel.com
Add a small helper to compute the set of pipes that the current
crtc is using.
And we have at least one trivial place in
intel_ddi_update_active_dpll() where we can use it
immediately, so let's do that.
v2: Use the name 'pipe_crtc' for the per-pipe crtc pointer
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-12-ville.syrjala@linux.intel.com
Pass the connector explicitly to intel_dp_need_bigjoiner()
so that it'll actually check the correct place for the
bigjoiner force flag.
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-11-ville.syrjala@linux.intel.com
intel_dp_mst_compute_config() is missing the "does the
joiner need DSC?" check despite claiming to have a lot
of other joiner/dsc stuff in there (albeit disabled).
Replicate the logic from the SST side.
TODO: refactor all this duplicated code!
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-10-ville.syrjala@linux.intel.com
Prefer common check_add_overflow() from overflow.h over the locally
rolled versions of it. While check_add_overflow() does require a
variable to assign to, unlike add_overflows_t(), it's still better than
having multiple versions around.
Cc: Kees Cook <keescook@chromium.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405202625.2525671-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
All joined pipes share the same transcoder/timing generator.
Currently we just do the commits per-pipe, which doesn't really
work if we need to change switch between non-VRR and VRR timings
generators on the fly, or even when sending the push to the
transcoder. For now just disable VRR when bigjoiner is needed.
Cc: stable@vger.kernel.org
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-6-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit f9d5e51db6)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
All joined pipes share the same transcoder/timing generator.
Currently we just do the commits per-pipe, which doesn't really
work if we need to change the timings at the same time. For
now just disable live M/N updates when bigjoiner is needed.
Cc: stable@vger.kernel.org
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-5-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit ef79820db7)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The current modeset sequence can't handle port sync and bigjoiner
at the same time. Refuse port sync when bigjoiner is needed,
at least until we fix the modeset sequence.
v2: Add a FIXME (Vandite)
Cc: stable@vger.kernel.org
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-4-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit b37e1347b9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Bigjoiner seem to be causing all kinds of grief to the PSR
code currently. I don't believe there is any hardware issue
but the code simply not handling this correctly. For now
just disable PSR when bigjoiner is needed.
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-3-ville.syrjala@linux.intel.com
Reviewed-by: Arun R Murthy <arun.r.mruthy@intel.com>
Acked-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 372fa0c79d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently we only consider the relationship of the
old and new CDCLK frequencies when determining whether
to do the repgramming from intel_set_cdclk_pre_plane_update()
or intel_set_cdclk_post_plane_update().
It is technically possible to have a situation where the
CDCLK frequency is decreasing, but the voltage_level is
increasing due a DDI port. In this case we should bump
the voltage level already in intel_set_cdclk_pre_plane_update()
(so that the voltage_level will have been increased by the
time the port gets enabled), while leaving the CDCLK frequency
unchanged (as active planes/etc. may still depend on it).
We can then reduce the CDCLK frequency to its final value
from intel_set_cdclk_post_plane_update().
In order to handle that correctly we shall construct a
suitable amalgam of the old and new cdclk states in
intel_set_cdclk_pre_plane_update().
And we can simply call intel_set_cdclk() unconditionally
in both places as it will not do anything if nothing actually
changes vs. the current hw state.
v2: Handle cdclk_state->disable_pipes
v3: Only synchronize the cd2x update against the pipe's vblank
when the cdclk frequency is changing during the current
commit phase (Gustavo)
Cc: stable@vger.kernel.org
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-3-ville.syrjala@linux.intel.com
(cherry picked from commit 34d127e2bd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently we always reprogram CDCLK from the
intel_set_cdclk_pre_plane_update() when using squash/crawl.
The code only works correctly for the cd2x update or full
modeset cases, and it was simply never updated to deal with
squash/crawl.
If the CDCLK frequency is increasing we must reprogram it
before we do anything else that might depend on the new
higher frequency, and conversely we must not decrease
the frequency until everything that might still depend
on the old higher frequency has been dealt with.
Since cdclk_state->pipe is only relevant when doing a cd2x
update we can't use it to determine the correct sequence
during squash/crawl. To that end introduce cdclk_state->disable_pipes
which simply indicates that we must perform the update
while the pipes are disable (ie. during
intel_set_cdclk_pre_plane_update()). Otherwise we use the
same old vs. new CDCLK frequency comparsiong as for cd2x
updates.
The only remaining problem case is when the voltage_level
needs to increase due to a DDI port, but the CDCLK frequency
is decreasing (and not all pipes are being disabled). The
current approach will not bump the voltage level up until
after the port has already been enabled, which is too late.
But we'll take care of that case separately.
v2: Don't break the "must disable pipes case"
v3: Keep the on stack 'pipe' for future use
Cc: stable@vger.kernel.org
Fixes: d62686ba3b ("drm/i915/adl_p: CDCLK crawl support for ADL")
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-2-ville.syrjala@linux.intel.com
(cherry picked from commit 3aecee90ac)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
With bigjoiner the master crtc is the one that will send out the
uapi event/etc. We want that to happen after all the slaves are
done, so let's try to do the commits in reverse order so that
the master comes last.
Even worse, the modeset helper will simply complete the commit
on the slave pipe immediately as it consider the crtc to be inactive
(it can't see our crtc_state->hw.active/etc.).
With regular sync updates this generally doesn't matter all that
much as the slave pipe should typically finish its work during the
same frame as the master pipe. However in case the slave pipe's commit
slips into the next frame we end up in a bit of trouble. This is most
visible with either async flips (currently disabled with bigjoiner
exactly for this reason), and DSB gamma updates. With DSB the problem
happens because the DSB itself will wait until the next start vblank
before starting to execute. So if the master pipe already finished its
commit and the DSB on the slave pipe is still waiting for the next
vblank we will assume the DSB as gotten stuck and terminate it.
Reversing the commit order should ameliarate this for the most part
as the master pipe is guaranteed to start its commit after the slave
pipe started. The one thing that can still screw us over is the fact
that we aren't necessarily going to commit the pipes in the reverse
order as the actual order is dictated by the DDB overlap avoidance.
But that can only happen while other pipes are being enabled/disabled,
and so in the normal steady state we should be safe.
The full fix will involve making the commit machinery aware of the
slave pipes and not finish their commits prematurely. But that
will involve a bit more work than this. And this commit order
reversal will still be beneficial to avoid userspace getting an
-EBUSY from the following page flip if the second pipe's commit
does stretch into the next frame.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-2-ville.syrjala@linux.intel.com
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Currently intel_modeset_pipe_config_late() is called after the
bigjoiner state copy, and it will actually not do anything for
bigjoiner slaves. This can lead to a mismatched state between
the master and slave.
The two things that we do in the encoder .compute_config_late()
hook are mst master transcoder and port sync master transcoder
elections. So if either of either MST or port sync is combined
with bigjoiner then we can see the mismatch.
Currently this problem is more or less theoretical; MST+bigjoiner
has not been implemented yet, and port sync+bigjoiner would
require a tiled display with >5k tiles (or a very high
dotclock per tile). Although we do have kms_tiled_display in
igt which can fake a tiled display, and we can now force bigjoiner
via debugfs, so it is possible to trigger this if you try hard
enough.
Reorder the code such that intel_modeset_pipe_config_late()
will be called before the bigjoiner state copy happens so
that both pipes will end up with the same state.
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-7-ville.syrjala@linux.intel.com
