mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-09-04 20:19:47 +08:00
eb47ee0181
9767 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
![]() |
1e15510b71 |
Including fixes from bluetooth. We didn't get netfilter or wireless PRs
this week, so next week's PR is probably going to be bigger. A healthy dose of fixes for bugs introduced in the current release nonetheless. Current release - regressions: - Bluetooth: always allow SCO packets for user channel - af_unix: fix memory leak in unix_dgram_sendmsg() - rxrpc: - remove redundant peer->mtu_lock causing lockdep splats - fix spinlock flavor issues with the peer record hash - eth: iavf: fix circular lock dependency with netdev_lock - net: use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net() RDMA driver register notifier after the device Current release - new code bugs: - ethtool: fix ioctl confusing drivers about desired HDS user config - eth: ixgbe: fix media cage present detection for E610 device Previous releases - regressions: - loopback: avoid sending IP packets without an Ethernet header - mptcp: reset connection when MPTCP opts are dropped after join Previous releases - always broken: - net: better track kernel sockets lifetime - ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels - phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT - eth: enetc: number of error handling fixes - dsa: rtl8366rb: reshuffle the code to fix config / build issue with LED support Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmfAj8MACgkQMUZtbf5S IrtoTRAAj0XNWXGWZdOuVub0xhtjsPLoZktux4AzsELqaynextkJW6w9pG5qVrWu UZt3a3bC7u6+JoTgb+GQVhyjuuVjv6NOSuLK3FS+NePW8ijhLP5oTg6eD0MQS60Z wa9yQx3yL1Kvb6b80Go/3WgRX9V6Rx8zlROAl/gOlZ9NKB0rSVqnueZGPjGZJf1a ayyXsmzRykshbr5Ic0e+b74hFP3DGxVgHjIob1C4kk/Q+WOfQKnm3C3fnZ/R2QcS 7B7kSk9WokvNwk3hJc7ZtFxJbrQKSSuRI8nCD93hBjTn76yJjlPicJ9b6HJoGhE/ Pwt7fBnDCCA00x6ejD3OrurR+/80PbPtyvNtgMMTD49wSwxQpQ6YpTMInnodCzAV NvIhkkXBprI0kiTT4dDpNoeFMKD3i07etKpvMfEoDzZR7vgUsj6aClSmuxILeU9a crFC4Vp5SgyU1/lUPDiG4dfbd8s4hfM4bZ+d0zAtth3/rQA7/EA6dLqbRXXWX7h5 Gl6egKWPsSl+WUgFjpBjYfhqrQsc06hxaCh0SQYH6SnS3i+PlMU2uRJYZMLQ66rX QsSQOyqCEHwd1qnrLedg9rCniv+DzOJf+qh+H0eY9WhuOay+8T52OHLxpRjSHxBo SCP+qQxSX0qhH5DtUiOV50Fwg19UhJJyWd0COfv5SIGm/I1dUOY= =+Ci7 -----END PGP SIGNATURE----- Merge tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth. We didn't get netfilter or wireless PRs this week, so next week's PR is probably going to be bigger. A healthy dose of fixes for bugs introduced in the current release nonetheless. Current release - regressions: - Bluetooth: always allow SCO packets for user channel - af_unix: fix memory leak in unix_dgram_sendmsg() - rxrpc: - remove redundant peer->mtu_lock causing lockdep splats - fix spinlock flavor issues with the peer record hash - eth: iavf: fix circular lock dependency with netdev_lock - net: use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net() RDMA driver register notifier after the device Current release - new code bugs: - ethtool: fix ioctl confusing drivers about desired HDS user config - eth: ixgbe: fix media cage present detection for E610 device Previous releases - regressions: - loopback: avoid sending IP packets without an Ethernet header - mptcp: reset connection when MPTCP opts are dropped after join Previous releases - always broken: - net: better track kernel sockets lifetime - ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels - phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT - eth: enetc: number of error handling fixes - dsa: rtl8366rb: reshuffle the code to fix config / build issue with LED support" * tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits) net: ti: icss-iep: Reject perout generation request idpf: fix checksums set in idpf_rx_rsc() selftests: drv-net: Check if combined-count exists net: ipv6: fix dst ref loop on input in rpl lwt net: ipv6: fix dst ref loop on input in seg6 lwt usbnet: gl620a: fix endpoint checking in genelink_bind() net/mlx5: IRQ, Fix null string in debug print net/mlx5: Restore missing trace event when enabling vport QoS net/mlx5: Fix vport QoS cleanup on error net: mvpp2: cls: Fixed Non IP flow, with vlan tag flow defination. af_unix: Fix memory leak in unix_dgram_sendmsg() net: Handle napi_schedule() calls from non-interrupt net: Clear old fragment checksum value in napi_reuse_skb gve: unlink old napi when stopping a queue using queue API net: Use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net(). tcp: Defer ts_recent changes until req is owned net: enetc: fix the off-by-one issue in enetc_map_tx_tso_buffs() net: enetc: remove the mm_lock from the ENETC v4 driver net: enetc: add missing enetc4_link_deinit() net: enetc: update UDP checksum when updating originTimestamp field ... |
||
![]() |
77e45145e3 |
net: Handle napi_schedule() calls from non-interrupt
napi_schedule() is expected to be called either: * From an interrupt, where raised softirqs are handled on IRQ exit * From a softirq disabled section, where raised softirqs are handled on the next call to local_bh_enable(). * From a softirq handler, where raised softirqs are handled on the next round in do_softirq(), or further deferred to a dedicated kthread. Other bare tasks context may end up ignoring the raised NET_RX vector until the next random softirq handling opportunity, which may not happen before a while if the CPU goes idle afterwards with the tick stopped. Such "misuses" have been detected on several places thanks to messages of the kind: "NOHZ tick-stop error: local softirq work is pending, handler #08!!!" For example: __raise_softirq_irqoff __napi_schedule rtl8152_runtime_resume.isra.0 rtl8152_resume usb_resume_interface.isra.0 usb_resume_both __rpm_callback rpm_callback rpm_resume __pm_runtime_resume usb_autoresume_device usb_remote_wakeup hub_event process_one_work worker_thread kthread ret_from_fork ret_from_fork_asm And also: * drivers/net/usb/r8152.c::rtl_work_func_t * drivers/net/netdevsim/netdev.c::nsim_start_xmit There is a long history of issues of this kind: |
||
![]() |
49806fe6e6 |
net: Clear old fragment checksum value in napi_reuse_skb
In certain cases, napi_get_frags() returns an skb that points to an old
received fragment, This skb may have its skb->ip_summed, csum, and other
fields set from previous fragment handling.
Some network drivers set skb->ip_summed to either CHECKSUM_COMPLETE or
CHECKSUM_UNNECESSARY when getting skb from napi_get_frags(), while
others only set skb->ip_summed when RX checksum offload is enabled on
the device, and do not set any value for skb->ip_summed when hardware
checksum offload is disabled, assuming that the skb->ip_summed
initiated to zero by napi_reuse_skb, ionic driver for example will
ignore/unset any value for the ip_summed filed if HW checksum offload is
disabled, and if we have a situation where the user disables the
checksum offload during a traffic that could lead to the following
errors shown in the kernel logs:
<IRQ>
dump_stack_lvl+0x34/0x48
__skb_gro_checksum_complete+0x7e/0x90
tcp6_gro_receive+0xc6/0x190
ipv6_gro_receive+0x1ec/0x430
dev_gro_receive+0x188/0x360
? ionic_rx_clean+0x25a/0x460 [ionic]
napi_gro_frags+0x13c/0x300
? __pfx_ionic_rx_service+0x10/0x10 [ionic]
ionic_rx_service+0x67/0x80 [ionic]
ionic_cq_service+0x58/0x90 [ionic]
ionic_txrx_napi+0x64/0x1b0 [ionic]
__napi_poll+0x27/0x170
net_rx_action+0x29c/0x370
handle_softirqs+0xce/0x270
__irq_exit_rcu+0xa3/0xc0
common_interrupt+0x80/0xa0
</IRQ>
This inconsistency sometimes leads to checksum validation issues in the
upper layers of the network stack.
To resolve this, this patch clears the skb->ip_summed value for each
reused skb in by napi_reuse_skb(), ensuring that the caller is responsible
for setting the correct checksum status. This eliminates potential
checksum validation issues caused by improper handling of
skb->ip_summed.
Fixes:
|
||
![]() |
01c9c123db |
net: Use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
Breno Leitao reported the splat below. [0] Commit |
||
![]() |
18912c5206 |
tcp: devmem: don't write truncated dmabuf CMSGs to userspace
Currently, we report -ETOOSMALL (err) only on the first iteration
(!sent). When we get put_cmsg error after a bunch of successful
put_cmsg calls, we don't signal the error at all. This might be
confusing on the userspace side which will see truncated CMSGs
but no MSG_CTRUNC signal.
Consider the following case:
- sizeof(struct cmsghdr) = 16
- sizeof(struct dmabuf_cmsg) = 24
- total cmsg size (CMSG_LEN) = 40 (16+24)
When calling recvmsg with msg_controllen=60, the userspace
will receive two(!) dmabuf_cmsg(s), the first one will
be a valid one and the second one will be silently truncated. There is no
easy way to discover the truncation besides doing something like
"cm->cmsg_len != CMSG_LEN(sizeof(dmabuf_cmsg))".
Introduce new put_devmem_cmsg wrapper that reports an error instead
of doing the truncation. Mina suggests that it's the intended way
this API should work.
Note that we might now report MSG_CTRUNC when the users (incorrectly)
call us with msg_control == NULL.
Fixes:
|
||
![]() |
de2c211868 |
ipvs: Always clear ipvs_property flag in skb_scrub_packet()
We found an issue when using bpf_redirect with ipvs NAT mode after commit |
||
![]() |
c180188ec0 |
net: set the minimum for net_hotdata.netdev_budget_usecs
Commit |
||
![]() |
5c70eb5c59 |
net: better track kernel sockets lifetime
While kernel sockets are dismantled during pernet_operations->exit(),
their freeing can be delayed by any tx packets still held in qdisc
or device queues, due to skb_set_owner_w() prior calls.
This then trigger the following warning from ref_tracker_dir_exit() [1]
To fix this, make sure that kernel sockets own a reference on net->passive.
Add sk_net_refcnt_upgrade() helper, used whenever a kernel socket
is converted to a refcounted one.
[1]
[ 136.263918][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at
[ 136.263918][ T35] sk_alloc+0x2b3/0x370
[ 136.263918][ T35] inet6_create+0x6ce/0x10f0
[ 136.263918][ T35] __sock_create+0x4c0/0xa30
[ 136.263918][ T35] inet_ctl_sock_create+0xc2/0x250
[ 136.263918][ T35] igmp6_net_init+0x39/0x390
[ 136.263918][ T35] ops_init+0x31e/0x590
[ 136.263918][ T35] setup_net+0x287/0x9e0
[ 136.263918][ T35] copy_net_ns+0x33f/0x570
[ 136.263918][ T35] create_new_namespaces+0x425/0x7b0
[ 136.263918][ T35] unshare_nsproxy_namespaces+0x124/0x180
[ 136.263918][ T35] ksys_unshare+0x57d/0xa70
[ 136.263918][ T35] __x64_sys_unshare+0x38/0x40
[ 136.263918][ T35] do_syscall_64+0xf3/0x230
[ 136.263918][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 136.263918][ T35]
[ 136.343488][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at
[ 136.343488][ T35] sk_alloc+0x2b3/0x370
[ 136.343488][ T35] inet6_create+0x6ce/0x10f0
[ 136.343488][ T35] __sock_create+0x4c0/0xa30
[ 136.343488][ T35] inet_ctl_sock_create+0xc2/0x250
[ 136.343488][ T35] ndisc_net_init+0xa7/0x2b0
[ 136.343488][ T35] ops_init+0x31e/0x590
[ 136.343488][ T35] setup_net+0x287/0x9e0
[ 136.343488][ T35] copy_net_ns+0x33f/0x570
[ 136.343488][ T35] create_new_namespaces+0x425/0x7b0
[ 136.343488][ T35] unshare_nsproxy_namespaces+0x124/0x180
[ 136.343488][ T35] ksys_unshare+0x57d/0xa70
[ 136.343488][ T35] __x64_sys_unshare+0x38/0x40
[ 136.343488][ T35] do_syscall_64+0xf3/0x230
[ 136.343488][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes:
|
||
![]() |
319fc77f8f |
BPF fixes:
- Fix a soft-lockup in BPF arena_map_free on 64k page size kernels (Alan Maguire) - Fix a missing allocation failure check in BPF verifier's acquire_lock_state (Kumar Kartikeya Dwivedi) - Fix a NULL-pointer dereference in trace_kfree_skb by adding kfree_skb to the raw_tp_null_args set (Kuniyuki Iwashima) - Fix a deadlock when freeing BPF cgroup storage (Abel Wu) - Fix a syzbot-reported deadlock when holding BPF map's freeze_mutex (Andrii Nakryiko) - Fix a use-after-free issue in bpf_test_init when eth_skb_pkt_type is accessing skb data not containing an Ethernet header (Shigeru Yoshida) - Fix skipping non-existing keys in generic_map_lookup_batch (Yan Zhai) - Several BPF sockmap fixes to address incorrect TCP copied_seq calculations, which prevented correct data reads from recv(2) in user space (Jiayuan Chen) - Two fixes for BPF map lookup nullness elision (Daniel Xu) - Fix a NULL-pointer dereference from vmlinux BTF lookup in bpf_sk_storage_tracing_allowed (Jared Kangas) Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> -----BEGIN PGP SIGNATURE----- iIsEABYKADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZ7evlRUcZGFuaWVsQGlv Z2VhcmJveC5uZXQACgkQ2yufC7HISIPwHgD/dTvM00Ck4Q73fPivyT7tcqxeXJlD D6ggzWl/SG9LAbwA/2/cSgAM9Jm1g7ddvn/S9QaDYOs5GmFl6urq6krs+tYD =FCs9 -----END PGP SIGNATURE----- Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Pull BPF fixes from Daniel Borkmann: - Fix a soft-lockup in BPF arena_map_free on 64k page size kernels (Alan Maguire) - Fix a missing allocation failure check in BPF verifier's acquire_lock_state (Kumar Kartikeya Dwivedi) - Fix a NULL-pointer dereference in trace_kfree_skb by adding kfree_skb to the raw_tp_null_args set (Kuniyuki Iwashima) - Fix a deadlock when freeing BPF cgroup storage (Abel Wu) - Fix a syzbot-reported deadlock when holding BPF map's freeze_mutex (Andrii Nakryiko) - Fix a use-after-free issue in bpf_test_init when eth_skb_pkt_type is accessing skb data not containing an Ethernet header (Shigeru Yoshida) - Fix skipping non-existing keys in generic_map_lookup_batch (Yan Zhai) - Several BPF sockmap fixes to address incorrect TCP copied_seq calculations, which prevented correct data reads from recv(2) in user space (Jiayuan Chen) - Two fixes for BPF map lookup nullness elision (Daniel Xu) - Fix a NULL-pointer dereference from vmlinux BTF lookup in bpf_sk_storage_tracing_allowed (Jared Kangas) * tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests: bpf: test batch lookup on array of maps with holes bpf: skip non exist keys in generic_map_lookup_batch bpf: Handle allocation failure in acquire_lock_state bpf: verifier: Disambiguate get_constant_map_key() errors bpf: selftests: Test constant key extraction on irrelevant maps bpf: verifier: Do not extract constant map keys for irrelevant maps bpf: Fix softlockup in arena_map_free on 64k page kernel net: Add rx_skb of kfree_skb to raw_tp_null_args[]. bpf: Fix deadlock when freeing cgroup storage selftests/bpf: Add strparser test for bpf selftests/bpf: Fix invalid flag of recv() bpf: Disable non stream socket for strparser bpf: Fix wrong copied_seq calculation strparser: Add read_sock callback bpf: avoid holding freeze_mutex during mmap operation bpf: unify VM_WRITE vs VM_MAYWRITE use in BPF map mmaping logic selftests/bpf: Adjust data size to have ETH_HLEN bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type() bpf: Remove unnecessary BTF lookups in bpf_sk_storage_tracing_allowed |
||
![]() |
6bc7e4eb04 |
Revert "net: skb: introduce and use a single page frag cache"
After the previous commit is finally safe to revert commit |
||
![]() |
14ad6ed30a |
net: allow small head cache usage with large MAX_SKB_FRAGS values
Sabrina reported the following splat:
WARNING: CPU: 0 PID: 1 at net/core/dev.c:6935 netif_napi_add_weight_locked+0x8f2/0xba0
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.14.0-rc1-net-00092-g011b03359038 #996
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
RIP: 0010:netif_napi_add_weight_locked+0x8f2/0xba0
Code: e8 c3 e6 6a fe 48 83 c4 28 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc c7 44 24 10 ff ff ff ff e9 8f fb ff ff e8 9e e6 6a fe <0f> 0b e9 d3 fe ff ff e8 92 e6 6a fe 48 8b 04 24 be ff ff ff ff 48
RSP: 0000:ffffc9000001fc60 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88806ce48128 RCX: 1ffff11001664b9e
RDX: ffff888008f00040 RSI: ffffffff8317ca42 RDI: ffff88800b325cb6
RBP: ffff88800b325c40 R08: 0000000000000001 R09: ffffed100167502c
R10: ffff88800b3a8163 R11: 0000000000000000 R12: ffff88800ac1c168
R13: ffff88800ac1c168 R14: ffff88800ac1c168 R15: 0000000000000007
FS: 0000000000000000(0000) GS:ffff88806ce00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff888008201000 CR3: 0000000004c94001 CR4: 0000000000370ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
gro_cells_init+0x1ba/0x270
xfrm_input_init+0x4b/0x2a0
xfrm_init+0x38/0x50
ip_rt_init+0x2d7/0x350
ip_init+0xf/0x20
inet_init+0x406/0x590
do_one_initcall+0x9d/0x2e0
do_initcalls+0x23b/0x280
kernel_init_freeable+0x445/0x490
kernel_init+0x20/0x1d0
ret_from_fork+0x46/0x80
ret_from_fork_asm+0x1a/0x30
</TASK>
irq event stamp: 584330
hardirqs last enabled at (584338): [<ffffffff8168bf87>] __up_console_sem+0x77/0xb0
hardirqs last disabled at (584345): [<ffffffff8168bf6c>] __up_console_sem+0x5c/0xb0
softirqs last enabled at (583242): [<ffffffff833ee96d>] netlink_insert+0x14d/0x470
softirqs last disabled at (583754): [<ffffffff8317c8cd>] netif_napi_add_weight_locked+0x77d/0xba0
on kernel built with MAX_SKB_FRAGS=45, where SKB_WITH_OVERHEAD(1024)
is smaller than GRO_MAX_HEAD.
Such built additionally contains the revert of the single page frag cache
so that napi_get_frags() ends up using the page frag allocator, triggering
the splat.
Note that the underlying issue is independent from the mentioned
revert; address it ensuring that the small head cache will fit either TCP
and GRO allocation and updating napi_alloc_skb() and __netdev_alloc_skb()
to select kmalloc() usage for any allocation fitting such cache.
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Suggested-by: Eric Dumazet <edumazet@google.com>
Fixes:
|
||
![]() |
4b5a28b38c |
net: Add non-RCU dev_getbyhwaddr() helper
Add dedicated helper for finding devices by hardware address when holding rtnl_lock, similar to existing dev_getbyhwaddr_rcu(). This prevents PROVE_LOCKING warnings when rtnl_lock is held but RCU read lock is not. Extract common address comparison logic into dev_addr_cmp(). The context about this change could be found in the following discussion: Link: https://lore.kernel.org/all/20250206-scarlet-ermine-of-improvement-1fcac5@leitao/ Cc: kuniyu@amazon.com Cc: ushankar@purestorage.com Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250218-arm_fix_selftest-v5-1-d3d6892db9e1@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
![]() |
69ab34f705 |
flow_dissector: Fix port range key handling in BPF conversion
Fix how port range keys are handled in __skb_flow_bpf_to_target() by:
- Separating PORTS and PORTS_RANGE key handling
- Using correct key_ports_range structure for range keys
- Properly initializing both key types independently
This ensures port range information is correctly stored in its dedicated
structure rather than incorrectly using the regular ports key structure.
Fixes:
|
||
![]() |
3e5796862c |
flow_dissector: Fix handling of mixed port and port-range keys
This patch fixes a bug in TC flower filter where rules combining a
specific destination port with a source port range weren't working
correctly.
The specific case was when users tried to configure rules like:
tc filter add dev ens38 ingress protocol ip flower ip_proto udp \
dst_port 5000 src_port 2000-3000 action drop
The root cause was in the flow dissector code. While both
FLOW_DISSECTOR_KEY_PORTS and FLOW_DISSECTOR_KEY_PORTS_RANGE flags
were being set correctly in the classifier, the __skb_flow_dissect_ports()
function was only populating one of them: whichever came first in
the enum check. This meant that when the code needed both a specific
port and a port range, one of them would be left as 0, causing the
filter to not match packets as expected.
Fix it by removing the either/or logic and instead checking and
populating both key types independently when they're in use.
Fixes:
|
||
![]() |
d4c6bfc839 |
dev: Use rtnl_net_dev_lock() in unregister_netdev().
The following sequence is basically illegal when dev was fetched
without lookup because dev_net(dev) might be different after holding
rtnl_net_lock():
net = dev_net(dev);
rtnl_net_lock(net);
Let's use rtnl_net_dev_lock() in unregister_netdev().
Note that there is no real bug in unregister_netdev() for now
because RTNL protects the scope even if dev_net(dev) is changed
before/after RTNL.
Fixes:
|
||
![]() |
65161fb544 |
net: Fix dev_net(dev) race in unregister_netdevice_notifier_dev_net().
After the cited commit, dev_net(dev) is fetched before holding RTNL
and passed to __unregister_netdevice_notifier_net().
However, dev_net(dev) might be different after holding RTNL.
In the reported case [0], while removing a VF device, its netns was
being dismantled and the VF was moved to init_net.
So the following sequence is basically illegal when dev was fetched
without lookup:
net = dev_net(dev);
rtnl_net_lock(net);
Let's use a new helper rtnl_net_dev_lock() to fix the race.
It fetches dev_net_rcu(dev), bumps its net->passive, and checks if
dev_net_rcu(dev) is changed after rtnl_net_lock().
[0]:
BUG: KASAN: slab-use-after-free in notifier_call_chain (kernel/notifier.c:75 (discriminator 2))
Read of size 8 at addr ffff88810cefb4c8 by task test-bridge-lag/21127
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:123)
print_report (mm/kasan/report.c:379 mm/kasan/report.c:489)
kasan_report (mm/kasan/report.c:604)
notifier_call_chain (kernel/notifier.c:75 (discriminator 2))
call_netdevice_notifiers_info (net/core/dev.c:2011)
unregister_netdevice_many_notify (net/core/dev.c:11551)
unregister_netdevice_queue (net/core/dev.c:11487)
unregister_netdev (net/core/dev.c:11635)
mlx5e_remove (drivers/net/ethernet/mellanox/mlx5/core/en_main.c:6552 drivers/net/ethernet/mellanox/mlx5/core/en_main.c:6579) mlx5_core
auxiliary_bus_remove (drivers/base/auxiliary.c:230)
device_release_driver_internal (drivers/base/dd.c:1275 drivers/base/dd.c:1296)
bus_remove_device (./include/linux/kobject.h:193 drivers/base/base.h:73 drivers/base/bus.c:583)
device_del (drivers/base/power/power.h:142 drivers/base/core.c:3855)
mlx5_rescan_drivers_locked (./include/linux/auxiliary_bus.h:241 drivers/net/ethernet/mellanox/mlx5/core/dev.c:333 drivers/net/ethernet/mellanox/mlx5/core/dev.c:535 drivers/net/ethernet/mellanox/mlx5/core/dev.c:549) mlx5_core
mlx5_unregister_device (drivers/net/ethernet/mellanox/mlx5/core/dev.c:468) mlx5_core
mlx5_uninit_one (./include/linux/instrumented.h:68 ./include/asm-generic/bitops/instrumented-non-atomic.h:141 drivers/net/ethernet/mellanox/mlx5/core/main.c:1563) mlx5_core
remove_one (drivers/net/ethernet/mellanox/mlx5/core/main.c:965 drivers/net/ethernet/mellanox/mlx5/core/main.c:2019) mlx5_core
pci_device_remove (./include/linux/pm_runtime.h:129 drivers/pci/pci-driver.c:475)
device_release_driver_internal (drivers/base/dd.c:1275 drivers/base/dd.c:1296)
unbind_store (drivers/base/bus.c:245)
kernfs_fop_write_iter (fs/kernfs/file.c:338)
vfs_write (fs/read_write.c:587 (discriminator 1) fs/read_write.c:679 (discriminator 1))
ksys_write (fs/read_write.c:732)
do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
RIP: 0033:0x7f6a4d5018b7
Fixes:
|
||
![]() |
e57a632021 |
net: Add net_passive_inc() and net_passive_dec().
net_drop_ns() is NULL when CONFIG_NET_NS is disabled. The next patch introduces a function that increments and decrements net->passive. As a prep, let's rename and export net_free() to net_passive_dec() and add net_passive_inc(). Suggested-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/netdev/CANn89i+oUCt2VGvrbrweniTendZFEh+nwS=uonc004-aPkWy-Q@mail.gmail.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250217191129.19967-2-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
![]() |
8fb5bb169d |
sockmap, vsock: For connectible sockets allow only connected
sockmap expects all vsocks to have a transport assigned, which is expressed
in vsock_proto::psock_update_sk_prot(). However, there is an edge case
where an unconnected (connectible) socket may lose its previously assigned
transport. This is handled with a NULL check in the vsock/BPF recv path.
Another design detail is that listening vsocks are not supposed to have any
transport assigned at all. Which implies they are not supported by the
sockmap. But this is complicated by the fact that a socket, before
switching to TCP_LISTEN, may have had some transport assigned during a
failed connect() attempt. Hence, we may end up with a listening vsock in a
sockmap, which blows up quickly:
KASAN: null-ptr-deref in range [0x0000000000000120-0x0000000000000127]
CPU: 7 UID: 0 PID: 56 Comm: kworker/7:0 Not tainted 6.14.0-rc1+
Workqueue: vsock-loopback vsock_loopback_work
RIP: 0010:vsock_read_skb+0x4b/0x90
Call Trace:
sk_psock_verdict_data_ready+0xa4/0x2e0
virtio_transport_recv_pkt+0x1ca8/0x2acc
vsock_loopback_work+0x27d/0x3f0
process_one_work+0x846/0x1420
worker_thread+0x5b3/0xf80
kthread+0x35a/0x700
ret_from_fork+0x2d/0x70
ret_from_fork_asm+0x1a/0x30
For connectible sockets, instead of relying solely on the state of
vsk->transport, tell sockmap to only allow those representing established
connections. This aligns with the behaviour for AF_INET and AF_UNIX.
Fixes:
|
||
![]() |
07b598c0e6 |
drop_monitor: fix incorrect initialization order
Syzkaller reports the following bug:
BUG: spinlock bad magic on CPU#1, syz-executor.0/7995
lock: 0xffff88805303f3e0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
CPU: 1 PID: 7995 Comm: syz-executor.0 Tainted: G E 5.10.209+ #1
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x119/0x179 lib/dump_stack.c:118
debug_spin_lock_before kernel/locking/spinlock_debug.c:83 [inline]
do_raw_spin_lock+0x1f6/0x270 kernel/locking/spinlock_debug.c:112
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:117 [inline]
_raw_spin_lock_irqsave+0x50/0x70 kernel/locking/spinlock.c:159
reset_per_cpu_data+0xe6/0x240 [drop_monitor]
net_dm_cmd_trace+0x43d/0x17a0 [drop_monitor]
genl_family_rcv_msg_doit+0x22f/0x330 net/netlink/genetlink.c:739
genl_family_rcv_msg net/netlink/genetlink.c:783 [inline]
genl_rcv_msg+0x341/0x5a0 net/netlink/genetlink.c:800
netlink_rcv_skb+0x14d/0x440 net/netlink/af_netlink.c:2497
genl_rcv+0x29/0x40 net/netlink/genetlink.c:811
netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline]
netlink_unicast+0x54b/0x800 net/netlink/af_netlink.c:1348
netlink_sendmsg+0x914/0xe00 net/netlink/af_netlink.c:1916
sock_sendmsg_nosec net/socket.c:651 [inline]
__sock_sendmsg+0x157/0x190 net/socket.c:663
____sys_sendmsg+0x712/0x870 net/socket.c:2378
___sys_sendmsg+0xf8/0x170 net/socket.c:2432
__sys_sendmsg+0xea/0x1b0 net/socket.c:2461
do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x62/0xc7
RIP: 0033:0x7f3f9815aee9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f3f972bf0c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f3f9826d050 RCX: 00007f3f9815aee9
RDX: 0000000020000000 RSI: 0000000020001300 RDI: 0000000000000007
RBP: 00007f3f981b63bd R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000006e R14: 00007f3f9826d050 R15: 00007ffe01ee6768
If drop_monitor is built as a kernel module, syzkaller may have time
to send a netlink NET_DM_CMD_START message during the module loading.
This will call the net_dm_monitor_start() function that uses
a spinlock that has not yet been initialized.
To fix this, let's place resource initialization above the registration
of a generic netlink family.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with Syzkaller.
Fixes:
|
||
![]() |
0892b84031 |
Reapply "net: skb: introduce and use a single page frag cache"
This reverts commit |
||
![]() |
becbd5850c |
neighbour: use RCU protection in __neigh_notify()
__neigh_notify() can be called without RTNL or RCU protection.
Use RCU protection to avoid potential UAF.
Fixes:
|
||
![]() |
011b033590 |
Revert "net: skb: introduce and use a single page frag cache"
This reverts commit |
||
![]() |
cb827db50a |
net: fib_rules: annotate data-races around rule->[io]ifindex
rule->iifindex and rule->oifindex can be read without holding RTNL.
Add READ_ONCE()/WRITE_ONCE() annotations where needed.
Fixes:
|
||
![]() |
1438f5d07b |
rtnetlink: fix netns leak with rtnl_setlink()
A call to rtnl_nets_destroy() is needed to release references taken on
netns put in rtnl_nets.
CC: stable@vger.kernel.org
Fixes:
|
||
![]() |
afec62cd0a |
flow_dissector: use RCU protection to fetch dev_net()
__skb_flow_dissect() can be called from arbitrary contexts.
It must extend its RCU protection section to include
the call to dev_net(), which can become dev_net_rcu().
This makes sure the net structure can not disappear under us.
Fixes:
|
||
![]() |
d3ed6dee73 |
net: harmonize tstats and dstats
After the blamed commits below, some UDP tunnel use dstats for accounting. On the xmit path, all the UDP-base tunnels ends up using iptunnel_xmit_stats() for stats accounting, and the latter assumes the relevant (tunnel) network device uses tstats. The end result is some 'funny' stat report for the mentioned UDP tunnel, e.g. when no packet is actually dropped and a bunch of packets are transmitted: gnv2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue \ state UNKNOWN mode DEFAULT group default qlen 1000 link/ether ee:7d:09:87:90:ea brd ff:ff:ff:ff:ff:ff RX: bytes packets errors dropped missed mcast 14916 23 0 15 0 0 TX: bytes packets errors dropped carrier collsns 0 1566 0 0 0 0 Address the issue ensuring the same binary layout for the overlapping fields of dstats and tstats. While this solution is a bit hackish, is smaller and with no performance pitfall compared to other alternatives i.e. supporting both dstat and tstat in iptunnel_xmit_stats() or reverting the blamed commit. With time we should possibly move all the IP-based tunnel (and virtual devices) to dstats. Fixes: |
||
![]() |
c2933b2bef |
First batch of fixes for 6.14. Nothing really stands out,
but as usual there's a slight concentration of fixes for issues added in the last two weeks before the MW, and driver bugs from 6.13 which tend to get discovered upon wider distribution. Including fixes from IPSec, netfilter and Bluetooth. Current release - regressions: - net: revert RTNL changes in unregister_netdevice_many_notify() - Bluetooth: fix possible infinite recursion of btusb_reset - eth: adjust locking in some old drivers which protect their state with spinlocks to avoid sleeping in atomic; core protects netdev state with a mutex now Previous releases - regressions: - eth: mlx5e: make sure we pass node ID, not CPU ID to kvzalloc_node() - eth: bgmac: reduce max frame size to support just 1500 bytes; the jumbo frame support would previously cause OOB writes, but now fails outright - mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted, avoid false detection of MPTCP blackholing Previous releases - always broken: - mptcp: handle fastopen disconnect correctly - xfrm: make sure skb->sk is a full sock before accessing its fields - xfrm: fix taking a lock with preempt disabled for RT kernels - usb: ipheth: improve safety of packet metadata parsing; prevent potential OOB accesses - eth: renesas: fix missing rtnl lock in suspend/resume path Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmebzXsACgkQMUZtbf5S IrvGBQ//auOF2yY1sg40fBvc6Hr1jpZBcr+uqTL6Qka1uVOvTFY51hAN54lBt32+ ixmcHsD0xdcHrr7VrqSXqurQLiGsdwUpnxZFCj/FymQuMunVysEqudvPeKDVHpsw JW5c4nJOexEA2viByK9iB23Qq0P3uBoPEnKrbSTVSDvYaXUj6y8Cvt3/vXc+H/tc T7GaxHH55NNNPkRz34YU3OWcaZsgkQEcdVpZf4tODPmg7J5VQj8SQeMhk/HI0sdO WKjWB0woZkiQECtamqAOXnv47PXd6igv8NALRPlJcKjs0EszUvuYhD/9MEOeghjI sjcQn9JnPpG+ca/qFVCSpEEOo2zGVn5dkJT5x26udH+5XHf7Pq+zpJwB6LHo98yF bGMpIrF6gi2EnBtS/tRjMyBU9Ut9KiUtjXMvn9EsD1U1FGIbz6wyQLlT0pG0hwJb rEdKfegrcyhWKHOD4vH9ciEg/7lgGfsGyfJDktIMdyailZc6tBcxwbdlc+5jRDA9 0RqGASIXaiX7AC3WOSeQzMgbV+WXdhaX/yrMJL5KBfBTzxG2audnJt1tPN3mbh3z NM6M2cnMsoX4QLSiaukJaCL7LWHSTlVttZVg8FGXHj1PejMQQBVjGVvzk2UF55UR gV7X9/VkXhmIDAZgThWtOdPLz+ItksfSKiruhUsXust6JgqRuqc= =GjBE -----END PGP SIGNATURE----- Merge tag 'net-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from IPSec, netfilter and Bluetooth. Nothing really stands out, but as usual there's a slight concentration of fixes for issues added in the last two weeks before the merge window, and driver bugs from 6.13 which tend to get discovered upon wider distribution. Current release - regressions: - net: revert RTNL changes in unregister_netdevice_many_notify() - Bluetooth: fix possible infinite recursion of btusb_reset - eth: adjust locking in some old drivers which protect their state with spinlocks to avoid sleeping in atomic; core protects netdev state with a mutex now Previous releases - regressions: - eth: - mlx5e: make sure we pass node ID, not CPU ID to kvzalloc_node() - bgmac: reduce max frame size to support just 1500 bytes; the jumbo frame support would previously cause OOB writes, but now fails outright - mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted, avoid false detection of MPTCP blackholing Previous releases - always broken: - mptcp: handle fastopen disconnect correctly - xfrm: - make sure skb->sk is a full sock before accessing its fields - fix taking a lock with preempt disabled for RT kernels - usb: ipheth: improve safety of packet metadata parsing; prevent potential OOB accesses - eth: renesas: fix missing rtnl lock in suspend/resume path" * tag 'net-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits) MAINTAINERS: add Neal to TCP maintainers net: revert RTNL changes in unregister_netdevice_many_notify() net: hsr: fix fill_frame_info() regression vs VLAN packets doc: mptcp: sysctl: blackhole_timeout is per-netns mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted netfilter: nf_tables: reject mismatching sum of field_len with set key length net: sh_eth: Fix missing rtnl lock in suspend/resume path net: ravb: Fix missing rtnl lock in suspend/resume path selftests/net: Add test for loading devbound XDP program in generic mode net: xdp: Disallow attaching device-bound programs in generic mode tcp: correct handling of extreme memory squeeze bgmac: reduce max frame size to support just MTU 1500 vsock/test: Add test for connect() retries vsock/test: Add test for UAF due to socket unbinding vsock/test: Introduce vsock_connect_fd() vsock/test: Introduce vsock_bind() vsock: Allow retrying on connect() failure vsock: Keep the binding until socket destruction Bluetooth: L2CAP: accept zero as a special value for MTU auto-selection Bluetooth: btnxpuart: Fix glitches seen in dual A2DP streaming ... |
||
![]() |
e759e1e4a4 |
net: revert RTNL changes in unregister_netdevice_many_notify()
This patch reverts following changes: |
||
![]() |
3595599fa8 |
net: xdp: Disallow attaching device-bound programs in generic mode
Device-bound programs are used to support RX metadata kfuncs. These
kfuncs are driver-specific and rely on the driver context to read the
metadata. This means they can't work in generic XDP mode. However, there
is no check to disallow such programs from being attached in generic
mode, in which case the metadata kfuncs will be called in an invalid
context, leading to crashes.
Fix this by adding a check to disallow attaching device-bound programs
in generic mode.
Fixes:
|
||
![]() |
5459cce6bf |
bpf: Disable non stream socket for strparser
Currently, only TCP supports strparser, but sockmap doesn't intercept
non-TCP connections to attach strparser. For example, with UDP, although
the read/write handlers are replaced, strparser is not executed due to
the lack of a read_sock operation.
Furthermore, in udp_bpf_recvmsg(), it checks whether the psock has data,
and if not, it falls back to the native UDP read interface, making
UDP + strparser appear to read correctly. According to its commit history,
this behavior is unexpected.
Moreover, since UDP lacks the concept of streams, we intercept it directly.
Fixes:
|
||
![]() |
36b62df568 |
bpf: Fix wrong copied_seq calculation
'sk->copied_seq' was updated in the tcp_eat_skb() function when the action
of a BPF program was SK_REDIRECT. For other actions, like SK_PASS, the
update logic for 'sk->copied_seq' was moved to tcp_bpf_recvmsg_parser()
to ensure the accuracy of the 'fionread' feature.
It works for a single stream_verdict scenario, as it also modified
sk_data_ready->sk_psock_verdict_data_ready->tcp_read_skb
to remove updating 'sk->copied_seq'.
However, for programs where both stream_parser and stream_verdict are
active (strparser purpose), tcp_read_sock() was used instead of
tcp_read_skb() (sk_data_ready->strp_data_ready->tcp_read_sock).
tcp_read_sock() now still updates 'sk->copied_seq', leading to duplicate
updates.
In summary, for strparser + SK_PASS, copied_seq is redundantly calculated
in both tcp_read_sock() and tcp_bpf_recvmsg_parser().
The issue causes incorrect copied_seq calculations, which prevent
correct data reads from the recv() interface in user-land.
We do not want to add new proto_ops to implement a new version of
tcp_read_sock, as this would introduce code complexity [1].
We could have added noack and copied_seq to desc, and then called
ops->read_sock. However, unfortunately, other modules didn’t fully
initialize desc to zero. So, for now, we are directly calling
tcp_read_sock_noack() in tcp_bpf.c.
[1]: https://lore.kernel.org/bpf/20241218053408.437295-1-mrpre@163.com
Fixes:
|
||
![]() |
7332537962 |
bpf: Remove unnecessary BTF lookups in bpf_sk_storage_tracing_allowed
When loading BPF programs, bpf_sk_storage_tracing_allowed() does a
series of lookups to get a type name from the program's attach_btf_id,
making the assumption that the type is present in the vmlinux BTF along
the way. However, this results in btf_type_by_id() returning a null
pointer if a non-vmlinux kernel BTF is attached to. Proof-of-concept on
a kernel with CONFIG_IPV6=m:
$ cat bpfcrash.c
#include <unistd.h>
#include <linux/bpf.h>
#include <sys/syscall.h>
static int bpf(enum bpf_cmd cmd, union bpf_attr *attr)
{
return syscall(__NR_bpf, cmd, attr, sizeof(*attr));
}
int main(void)
{
const int btf_fd = bpf(BPF_BTF_GET_FD_BY_ID, &(union bpf_attr) {
.btf_id = BTF_ID,
});
if (btf_fd < 0)
return 1;
const int bpf_sk_storage_get = 107;
const struct bpf_insn insns[] = {
{ .code = BPF_JMP | BPF_CALL, .imm = bpf_sk_storage_get},
{ .code = BPF_JMP | BPF_EXIT },
};
return bpf(BPF_PROG_LOAD, &(union bpf_attr) {
.prog_type = BPF_PROG_TYPE_TRACING,
.expected_attach_type = BPF_TRACE_FENTRY,
.license = (unsigned long)"GPL",
.insns = (unsigned long)&insns,
.insn_cnt = sizeof(insns) / sizeof(insns[0]),
.attach_btf_obj_fd = btf_fd,
.attach_btf_id = TYPE_ID,
});
}
$ sudo bpftool btf list | grep ipv6
2: name [ipv6] size 928200B
$ sudo bpftool btf dump id 2 | awk '$3 ~ /inet6_sock_destruct/'
[130689] FUNC 'inet6_sock_destruct' type_id=130677 linkage=static
$ gcc -D_DEFAULT_SOURCE -DBTF_ID=2 -DTYPE_ID=130689 \
bpfcrash.c -o bpfcrash
$ sudo ./bpfcrash
This causes a null pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
bpf_sk_storage_tracing_allowed+0x8c/0xb0 P
check_helper_call.isra.0+0xa8/0x1730
do_check+0xa18/0xb40
do_check_common+0x140/0x640
bpf_check+0xb74/0xcb8
bpf_prog_load+0x598/0x9a8
__sys_bpf+0x580/0x980
__arm64_sys_bpf+0x28/0x40
invoke_syscall.constprop.0+0x54/0xe8
do_el0_svc+0xb4/0xd0
el0_svc+0x44/0x1f8
el0t_64_sync_handler+0x13c/0x160
el0t_64_sync+0x184/0x188
Resolve this by using prog->aux->attach_func_name and removing the
lookups.
Fixes:
|
||
![]() |
67e4bb2ced |
net: page_pool: don't try to stash the napi id
Page ppol tried to cache the NAPI ID in page pool info to avoid
having a dependency on the life cycle of the NAPI instance.
Since commit under Fixes the NAPI ID is not populated until
napi_enable() and there's a good chance that page pool is
created before NAPI gets enabled.
Protect the NAPI pointer with the existing page pool mutex,
the reading path already holds it. napi_id itself we need
to READ_ONCE(), it's protected by netdev_lock() which are
not holding in page pool.
Before this patch napi IDs were missing for mlx5:
# ./cli.py --spec netlink/specs/netdev.yaml --dump page-pool-get
[{'id': 144, 'ifindex': 2, 'inflight': 3072, 'inflight-mem': 12582912},
{'id': 143, 'ifindex': 2, 'inflight': 5568, 'inflight-mem': 22806528},
{'id': 142, 'ifindex': 2, 'inflight': 5120, 'inflight-mem': 20971520},
{'id': 141, 'ifindex': 2, 'inflight': 4992, 'inflight-mem': 20447232},
...
After:
[{'id': 144, 'ifindex': 2, 'inflight': 3072, 'inflight-mem': 12582912,
'napi-id': 565},
{'id': 143, 'ifindex': 2, 'inflight': 4224, 'inflight-mem': 17301504,
'napi-id': 525},
{'id': 142, 'ifindex': 2, 'inflight': 4288, 'inflight-mem': 17563648,
'napi-id': 524},
...
Fixes:
|
||
![]() |
9c5968db9e |
The various patchsets are summarized below. Plus of course many
indivudual patches which are described in their changelogs. - "Allocate and free frozen pages" from Matthew Wilcox reorganizes the page allocator so we end up with the ability to allocate and free zero-refcount pages. So that callers (ie, slab) can avoid a refcount inc & dec. - "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to use large folios other than PMD-sized ones. - "Fix mm/rodata_test" from Petr Tesarik performs some maintenance and fixes for this small built-in kernel selftest. - "mas_anode_descend() related cleanup" from Wei Yang tidies up part of the mapletree code. - "mm: fix format issues and param types" from Keren Sun implements a few minor code cleanups. - "simplify split calculation" from Wei Yang provides a few fixes and a test for the mapletree code. - "mm/vma: make more mmap logic userland testable" from Lorenzo Stoakes continues the work of moving vma-related code into the (relatively) new mm/vma.c. - "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David Hildenbrand cleans up and rationalizes handling of gfp flags in the page allocator. - "readahead: Reintroduce fix for improper RA window sizing" from Jan Kara is a second attempt at fixing a readahead window sizing issue. It should reduce the amount of unnecessary reading. - "synchronously scan and reclaim empty user PTE pages" from Qi Zheng addresses an issue where "huge" amounts of pte pagetables are accumulated (https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/). Qi's series addresses this windup by synchronously freeing PTE memory within the context of madvise(MADV_DONTNEED). - "selftest/mm: Remove warnings found by adding compiler flags" from Muhammad Usama Anjum fixes some build warnings in the selftests code when optional compiler warnings are enabled. - "mm: don't use __GFP_HARDWALL when migrating remote pages" from David Hildenbrand tightens the allocator's observance of __GFP_HARDWALL. - "pkeys kselftests improvements" from Kevin Brodsky implements various fixes and cleanups in the MM selftests code, mainly pertaining to the pkeys tests. - "mm/damon: add sample modules" from SeongJae Park enhances DAMON to estimate application working set size. - "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn provides some cleanups to memcg's hugetlb charging logic. - "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song removes the global swap cgroup lock. A speedup of 10% for a tmpfs-based kernel build was demonstrated. - "zram: split page type read/write handling" from Sergey Senozhatsky has several fixes and cleaups for zram in the area of zram_write_page(). A watchdog softlockup warning was eliminated. - "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin Brodsky cleans up the pagetable destructor implementations. A rare use-after-free race is fixed. - "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes simplifies and cleans up the debugging code in the VMA merging logic. - "Account page tables at all levels" from Kevin Brodsky cleans up and regularizes the pagetable ctor/dtor handling. This results in improvements in accounting accuracy. - "mm/damon: replace most damon_callback usages in sysfs with new core functions" from SeongJae Park cleans up and generalizes DAMON's sysfs file interface logic. - "mm/damon: enable page level properties based monitoring" from SeongJae Park increases the amount of information which is presented in response to DAMOS actions. - "mm/damon: remove DAMON debugfs interface" from SeongJae Park removes DAMON's long-deprecated debugfs interfaces. Thus the migration to sysfs is completed. - "mm/hugetlb: Refactor hugetlb allocation resv accounting" from Peter Xu cleans up and generalizes the hugetlb reservation accounting. - "mm: alloc_pages_bulk: small API refactor" from Luiz Capitulino removes a never-used feature of the alloc_pages_bulk() interface. - "mm/damon: extend DAMOS filters for inclusion" from SeongJae Park extends DAMOS filters to support not only exclusion (rejecting), but also inclusion (allowing) behavior. - "Add zpdesc memory descriptor for zswap.zpool" from Alex Shi "introduces a new memory descriptor for zswap.zpool that currently overlaps with struct page for now. This is part of the effort to reduce the size of struct page and to enable dynamic allocation of memory descriptors." - "mm, swap: rework of swap allocator locks" from Kairui Song redoes and simplifies the swap allocator locking. A speedup of 400% was demonstrated for one workload. As was a 35% reduction for kernel build time with swap-on-zram. - "mm: update mips to use do_mmap(), make mmap_region() internal" from Lorenzo Stoakes reworks MIPS's use of mmap_region() so that mmap_region() can be made MM-internal. - "mm/mglru: performance optimizations" from Yu Zhao fixes a few MGLRU regressions and otherwise improves MGLRU performance. - "Docs/mm/damon: add tuning guide and misc updates" from SeongJae Park updates DAMON documentation. - "Cleanup for memfd_create()" from Isaac Manjarres does that thing. - "mm: hugetlb+THP folio and migration cleanups" from David Hildenbrand provides various cleanups in the areas of hugetlb folios, THP folios and migration. - "Uncached buffered IO" from Jens Axboe implements the new RWF_DONTCACHE flag which provides synchronous dropbehind for pagecache reading and writing. To permite userspace to address issues with massive buildup of useless pagecache when reading/writing fast devices. - "selftests/mm: virtual_address_range: Reduce memory" from Thomas Weißschuh fixes and optimizes some of the MM selftests. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ5a+cwAKCRDdBJ7gKXxA jtoyAP9R58oaOKPJuTizEKKXvh/RpMyD6sYcz/uPpnf+cKTZxQEAqfVznfWlw/Lz uC3KRZYhmd5YrxU4o+qjbzp9XWX/xAE= =Ib2s -----END PGP SIGNATURE----- Merge tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "The various patchsets are summarized below. Plus of course many indivudual patches which are described in their changelogs. - "Allocate and free frozen pages" from Matthew Wilcox reorganizes the page allocator so we end up with the ability to allocate and free zero-refcount pages. So that callers (ie, slab) can avoid a refcount inc & dec - "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to use large folios other than PMD-sized ones - "Fix mm/rodata_test" from Petr Tesarik performs some maintenance and fixes for this small built-in kernel selftest - "mas_anode_descend() related cleanup" from Wei Yang tidies up part of the mapletree code - "mm: fix format issues and param types" from Keren Sun implements a few minor code cleanups - "simplify split calculation" from Wei Yang provides a few fixes and a test for the mapletree code - "mm/vma: make more mmap logic userland testable" from Lorenzo Stoakes continues the work of moving vma-related code into the (relatively) new mm/vma.c - "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David Hildenbrand cleans up and rationalizes handling of gfp flags in the page allocator - "readahead: Reintroduce fix for improper RA window sizing" from Jan Kara is a second attempt at fixing a readahead window sizing issue. It should reduce the amount of unnecessary reading - "synchronously scan and reclaim empty user PTE pages" from Qi Zheng addresses an issue where "huge" amounts of pte pagetables are accumulated: https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/ Qi's series addresses this windup by synchronously freeing PTE memory within the context of madvise(MADV_DONTNEED) - "selftest/mm: Remove warnings found by adding compiler flags" from Muhammad Usama Anjum fixes some build warnings in the selftests code when optional compiler warnings are enabled - "mm: don't use __GFP_HARDWALL when migrating remote pages" from David Hildenbrand tightens the allocator's observance of __GFP_HARDWALL - "pkeys kselftests improvements" from Kevin Brodsky implements various fixes and cleanups in the MM selftests code, mainly pertaining to the pkeys tests - "mm/damon: add sample modules" from SeongJae Park enhances DAMON to estimate application working set size - "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn provides some cleanups to memcg's hugetlb charging logic - "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song removes the global swap cgroup lock. A speedup of 10% for a tmpfs-based kernel build was demonstrated - "zram: split page type read/write handling" from Sergey Senozhatsky has several fixes and cleaups for zram in the area of zram_write_page(). A watchdog softlockup warning was eliminated - "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin Brodsky cleans up the pagetable destructor implementations. A rare use-after-free race is fixed - "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes simplifies and cleans up the debugging code in the VMA merging logic - "Account page tables at all levels" from Kevin Brodsky cleans up and regularizes the pagetable ctor/dtor handling. This results in improvements in accounting accuracy - "mm/damon: replace most damon_callback usages in sysfs with new core functions" from SeongJae Park cleans up and generalizes DAMON's sysfs file interface logic - "mm/damon: enable page level properties based monitoring" from SeongJae Park increases the amount of information which is presented in response to DAMOS actions - "mm/damon: remove DAMON debugfs interface" from SeongJae Park removes DAMON's long-deprecated debugfs interfaces. Thus the migration to sysfs is completed - "mm/hugetlb: Refactor hugetlb allocation resv accounting" from Peter Xu cleans up and generalizes the hugetlb reservation accounting - "mm: alloc_pages_bulk: small API refactor" from Luiz Capitulino removes a never-used feature of the alloc_pages_bulk() interface - "mm/damon: extend DAMOS filters for inclusion" from SeongJae Park extends DAMOS filters to support not only exclusion (rejecting), but also inclusion (allowing) behavior - "Add zpdesc memory descriptor for zswap.zpool" from Alex Shi introduces a new memory descriptor for zswap.zpool that currently overlaps with struct page for now. This is part of the effort to reduce the size of struct page and to enable dynamic allocation of memory descriptors - "mm, swap: rework of swap allocator locks" from Kairui Song redoes and simplifies the swap allocator locking. A speedup of 400% was demonstrated for one workload. As was a 35% reduction for kernel build time with swap-on-zram - "mm: update mips to use do_mmap(), make mmap_region() internal" from Lorenzo Stoakes reworks MIPS's use of mmap_region() so that mmap_region() can be made MM-internal - "mm/mglru: performance optimizations" from Yu Zhao fixes a few MGLRU regressions and otherwise improves MGLRU performance - "Docs/mm/damon: add tuning guide and misc updates" from SeongJae Park updates DAMON documentation - "Cleanup for memfd_create()" from Isaac Manjarres does that thing - "mm: hugetlb+THP folio and migration cleanups" from David Hildenbrand provides various cleanups in the areas of hugetlb folios, THP folios and migration - "Uncached buffered IO" from Jens Axboe implements the new RWF_DONTCACHE flag which provides synchronous dropbehind for pagecache reading and writing. To permite userspace to address issues with massive buildup of useless pagecache when reading/writing fast devices - "selftests/mm: virtual_address_range: Reduce memory" from Thomas Weißschuh fixes and optimizes some of the MM selftests" * tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits) mm/compaction: fix UBSAN shift-out-of-bounds warning s390/mm: add missing ctor/dtor on page table upgrade kasan: sw_tags: use str_on_off() helper in kasan_init_sw_tags() tools: add VM_WARN_ON_VMG definition mm/damon/core: use str_high_low() helper in damos_wmark_wait_us() seqlock: add missing parameter documentation for raw_seqcount_try_begin() mm/page-writeback: consolidate wb_thresh bumping logic into __wb_calc_thresh mm/page_alloc: remove the incorrect and misleading comment zram: remove zcomp_stream_put() from write_incompressible_page() mm: separate move/undo parts from migrate_pages_batch() mm/kfence: use str_write_read() helper in get_access_type() selftests/mm/mkdirty: fix memory leak in test_uffdio_copy() kasan: hw_tags: Use str_on_off() helper in kasan_init_hw_tags() selftests/mm: virtual_address_range: avoid reading from VM_IO mappings selftests/mm: vm_util: split up /proc/self/smaps parsing selftests/mm: virtual_address_range: unmap chunks after validation selftests/mm: virtual_address_range: mmap() without PROT_WRITE selftests/memfd/memfd_test: fix possible NULL pointer dereference mm: add FGP_DONTCACHE folio creation flag mm: call filemap_fdatawrite_range_kick() after IOCB_DONTCACHE issue ... |
||
![]() |
6bf9b5b40a |
mm: alloc_pages_bulk: rename API
The previous commit removed the page_list argument from alloc_pages_bulk_noprof() along with the alloc_pages_bulk_list() function. Now that only the *_array() flavour of the API remains, we can do the following renaming (along with the _noprof() ones): alloc_pages_bulk_array -> alloc_pages_bulk alloc_pages_bulk_array_mempolicy -> alloc_pages_bulk_mempolicy alloc_pages_bulk_array_node -> alloc_pages_bulk_node Link: https://lkml.kernel.org/r/275a3bbc0be20fbe9002297d60045e67ab3d4ada.1734991165.git.luizcap@redhat.com Signed-off-by: Luiz Capitulino <luizcap@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
d0d106a2bd |
bpf-next-6.14
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmeOu1YACgkQ6rmadz2v bTrrHxAAn6eqEsluWnDlzhI0OGsPjvgS00sf+MOeqiXYeS2eJ8yJuKifp38+nIQZ lIplsWU2ReUY20eizPqLPnQ7TXZGvLgp08E8yHUoZ0siWanqr9iDRfbZCCNrDMNm lMqeR1SLapMws2R/UX9JbvPn2ajIJ6Lb4wxenTfdlW6q+0hAGM6Dt0k/jBod+quq /oo+xwG3L0q4APBovJfiAFN2z6IYN03b+zLiOrpIJtMACGewEXnl3m4mkL8ZM/FV nZGPIxIUPXCpKTGEkNqxfkrnHN2wZQ4ZSKEJ6lhEEp4jrgCVITaGZ/E7jlx6fZoj bbd4YMonIPo9Nhim8p1dt8yYBhKKiE5IXIq0GqlMv5+MvAN8ylrlydpsouW1fu66 hZ1W1BxbxmrgyF0Bwo9JPOMhBHwMrmD6iH9LgiMpZf0ASeF+q9cJpoSOU5j5E9XB LpLIRf5jYTd4wZjhDmrQREReLo+Bng9DlCBu+jjh2+YTz6l6Qed+ETpENcd7lL5i IHZVbgD2RVPNJoUfdrd763HfYfDTk+50MF5FIMEyfKHz11if0E/LhBMzto22hm6b 2f8ruj/8yvg8s2dxEP3ySQgcnynlwEnGxLenUVv7uEOYKeWri1rq+fvTK5ne1OLK oHnTlkViwQb74c0r8cFW+nkyfUYTfhhBAql14rl/fMjGDO2KZ10= =f2CA -----END PGP SIGNATURE----- Merge tag 'bpf-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Pull bpf updates from Alexei Starovoitov: "A smaller than usual release cycle. The main changes are: - Prepare selftest to run with GCC-BPF backend (Ihor Solodrai) In addition to LLVM-BPF runs the BPF CI now runs GCC-BPF in compile only mode. Half of the tests are failing, since support for btf_decl_tag is still WIP, but this is a great milestone. - Convert various samples/bpf to selftests/bpf/test_progs format (Alexis Lothoré and Bastien Curutchet) - Teach verifier to recognize that array lookup with constant in-range index will always succeed (Daniel Xu) - Cleanup migrate disable scope in BPF maps (Hou Tao) - Fix bpf_timer destroy path in PREEMPT_RT (Hou Tao) - Always use bpf_mem_alloc in bpf_local_storage in PREEMPT_RT (Martin KaFai Lau) - Refactor verifier lock support (Kumar Kartikeya Dwivedi) This is a prerequisite for upcoming resilient spin lock. - Remove excessive 'may_goto +0' instructions in the verifier that LLVM leaves when unrolls the loops (Yonghong Song) - Remove unhelpful bpf_probe_write_user() warning message (Marco Elver) - Add fd_array_cnt attribute for prog_load command (Anton Protopopov) This is a prerequisite for upcoming support for static_branch" * tag 'bpf-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (125 commits) selftests/bpf: Add some tests related to 'may_goto 0' insns bpf: Remove 'may_goto 0' instruction in opt_remove_nops() bpf: Allow 'may_goto 0' instruction in verifier selftests/bpf: Add test case for the freeing of bpf_timer bpf: Cancel the running bpf_timer through kworker for PREEMPT_RT bpf: Free element after unlock in __htab_map_lookup_and_delete_elem() bpf: Bail out early in __htab_map_lookup_and_delete_elem() bpf: Free special fields after unlock in htab_lru_map_delete_node() tools: Sync if_xdp.h uapi tooling header libbpf: Work around kernel inconsistently stripping '.llvm.' suffix bpf: selftests: verifier: Add nullness elision tests bpf: verifier: Support eliding map lookup nullness bpf: verifier: Refactor helper access type tracking bpf: tcp: Mark bpf_load_hdr_opt() arg2 as read-write bpf: verifier: Add missing newline on verbose() call selftests/bpf: Add distilled BTF test about marking BTF_IS_EMBEDDED libbpf: Fix incorrect traversal end type ID when marking BTF_IS_EMBEDDED libbpf: Fix return zero when elf_begin failed selftests/bpf: Fix btf leak on new btf alloc failure in btf_distill test veristat: Load struct_ops programs only once ... |
||
![]() |
cf33d96f50 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts and no adjacent changes. Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
![]() |
32ad1f7a05 |
net: provide pending ring configuration in net_device
Record the pending configuration in net_device struct. ethtool core duplicates the current config and the specific handlers (for now just ringparam) can modify it. Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250119020518.1962249-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
![]() |
3c836451ca |
net: move HDS config from ethtool state
Separate the HDS config from the ethtool state struct. The HDS config contains just simple parameters, not state. Having it as a separate struct will make it easier to clone / copy and also long term potentially make it per-queue. Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250119020518.1962249-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
![]() |
a12c76a033 |
net: sched: refine software bypass handling in tc_run
This patch addresses issues with filter counting in block (tcf_block), particularly for software bypass scenarios, by introducing a more accurate mechanism using useswcnt. Previously, filtercnt and skipswcnt were introduced by: Commit |
||
![]() |
185e5b8690 |
net: introduce netdev_napi_exit()
After
|
||
![]() |
bff406bc04 |
net: destroy dev->lock later in free_netdev()
syzbot complained that free_netdev() was calling netif_napi_del()
after dev->lock mutex has been destroyed.
This fires a warning for CONFIG_DEBUG_MUTEXES=y builds.
Move mutex_destroy(&dev->lock) near the end of free_netdev().
[1]
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 0 PID: 5971 at kernel/locking/mutex.c:564 __mutex_lock_common kernel/locking/mutex.c:564 [inline]
WARNING: CPU: 0 PID: 5971 at kernel/locking/mutex.c:564 __mutex_lock+0xdac/0xee0 kernel/locking/mutex.c:735
Modules linked in:
CPU: 0 UID: 0 PID: 5971 Comm: syz-executor Not tainted 6.13.0-rc7-syzkaller-01131-g8d20dcda404d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024
RIP: 0010:__mutex_lock_common kernel/locking/mutex.c:564 [inline]
RIP: 0010:__mutex_lock+0xdac/0xee0 kernel/locking/mutex.c:735
Code: 0f b6 04 38 84 c0 0f 85 1a 01 00 00 83 3d 6f 40 4c 04 00 75 19 90 48 c7 c7 60 84 0a 8c 48 c7 c6 00 85 0a 8c e8 f5 dc 91 f5 90 <0f> 0b 90 90 90 e9 c7 f3 ff ff 90 0f 0b 90 e9 29 f8 ff ff 90 0f 0b
RSP: 0018:ffffc90003317580 EFLAGS: 00010246
RAX: ee0f97edaf7b7d00 RBX: ffff8880299f8cb0 RCX: ffff8880323c9e00
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffc90003317710 R08: ffffffff81602ac2 R09: 1ffff110170c519a
R10: dffffc0000000000 R11: ffffed10170c519b R12: 0000000000000000
R13: 0000000000000000 R14: 1ffff92000662ec4 R15: dffffc0000000000
FS: 000055557a046500(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd581d46ff8 CR3: 000000006f870000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
netdev_lock include/linux/netdevice.h:2691 [inline]
__netif_napi_del include/linux/netdevice.h:2829 [inline]
netif_napi_del include/linux/netdevice.h:2848 [inline]
free_netdev+0x2d9/0x610 net/core/dev.c:11621
netdev_run_todo+0xf21/0x10d0 net/core/dev.c:11189
nsim_destroy+0x3c3/0x620 drivers/net/netdevsim/netdev.c:1028
__nsim_dev_port_del+0x14b/0x1b0 drivers/net/netdevsim/dev.c:1428
nsim_dev_port_del_all drivers/net/netdevsim/dev.c:1440 [inline]
nsim_dev_reload_destroy+0x28a/0x490 drivers/net/netdevsim/dev.c:1661
nsim_drv_remove+0x58/0x160 drivers/net/netdevsim/dev.c:1676
device_remove drivers/base/dd.c:567 [inline]
Fixes:
|
||
![]() |
d1f9f79fa2 |
net: let net.core.dev_weight always be non-zero
The following problem was encountered during stability test: (NULL net_device): NAPI poll function process_backlog+0x0/0x530 \ returned 1, exceeding its budget of 0. ------------[ cut here ]------------ list_add double add: new=ffff88905f746f48, prev=ffff88905f746f48, \ next=ffff88905f746e40. WARNING: CPU: 18 PID: 5462 at lib/list_debug.c:35 \ __list_add_valid_or_report+0xf3/0x130 CPU: 18 UID: 0 PID: 5462 Comm: ping Kdump: loaded Not tainted 6.13.0-rc7+ RIP: 0010:__list_add_valid_or_report+0xf3/0x130 Call Trace: ? __warn+0xcd/0x250 ? __list_add_valid_or_report+0xf3/0x130 enqueue_to_backlog+0x923/0x1070 netif_rx_internal+0x92/0x2b0 __netif_rx+0x15/0x170 loopback_xmit+0x2ef/0x450 dev_hard_start_xmit+0x103/0x490 __dev_queue_xmit+0xeac/0x1950 ip_finish_output2+0x6cc/0x1620 ip_output+0x161/0x270 ip_push_pending_frames+0x155/0x1a0 raw_sendmsg+0xe13/0x1550 __sys_sendto+0x3bf/0x4e0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x5b/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e The reproduction command is as follows: sysctl -w net.core.dev_weight=0 ping 127.0.0.1 This is because when the napi's weight is set to 0, process_backlog() may return 0 and clear the NAPI_STATE_SCHED bit of napi->state, causing this napi to be re-polled in net_rx_action() until __do_softirq() times out. Since the NAPI_STATE_SCHED bit has been cleared, napi_schedule_rps() can be retriggered in enqueue_to_backlog(), causing this issue. Making the napi's weight always non-zero solves this problem. Triggering this issue requires system-wide admin (setting is not namespaced). Fixes: |
||
![]() |
8ac412a336 |
bpf: tcp: Mark bpf_load_hdr_opt() arg2 as read-write
MEM_WRITE attribute is defined as: "Non-presence of MEM_WRITE means that
MEM is only being read". bpf_load_hdr_opt() both reads and writes from
its arg2 - void *search_res.
This matters a lot for the next commit where we more precisely track
stack accesses. Without this annotation, the verifier will make false
assumptions about the contents of memory written to by helpers and
possibly prune valid branches.
Fixes:
|
||
![]() |
be94cfdb99 |
dev: Hold rtnl_net_lock() for dev_ifsioc().
Basically, dev_ifsioc() operates on the passed single netns (except for netdev notifier chains with lower/upper devices for which we will need more changes). Let's hold rtnl_net_lock() for dev_ifsioc(). Now that NETDEV_CHANGENAME is always triggered under rtnl_net_lock() of the device's netns. (do_setlink() and dev_ifsioc()) Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250115095545.52709-4-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
![]() |
2f1bb1e2cc |
dev: Remove devnet_rename_sem.
devnet_rename_sem is no longer used since commit
|
||
![]() |
e361560a79 |
dev: Acquire netdev_rename_lock before restoring dev->name in dev_change_name().
The cited commit forgot to add netdev_rename_lock in one of the
error paths in dev_change_name().
Let's hold netdev_rename_lock before restoring the old dev->name.
Fixes:
|
||
![]() |
8d20dcda40 |
selftests: drv-net-hw: inject pp_alloc_fail errors in the right place
The tool pp_alloc_fail.py tested error recovery by injecting errors into the function page_pool_alloc_pages(). The page pool allocation function page_pool_dev_alloc() does not end up calling page_pool_alloc_pages(). page_pool_alloc_netmems() seems to be the function that is called by all of the page pool alloc functions in the API, so move error injection to that function instead. Signed-off-by: John Daley <johndale@cisco.com> Link: https://patch.msgid.link/20250115181312.3544-2-johndale@cisco.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
![]() |
2ee738e90e |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.13-rc8). Conflicts: drivers/net/ethernet/realtek/r8169_main.c |
||
![]() |
a50da36562 |
netdev: avoid CFI problems with sock priv helpers
Li Li reports that casting away callback type may cause issues
for CFI. Let's generate a small wrapper for each callback,
to make sure compiler sees the anticipated types.
Reported-by: Li Li <dualli@chromium.org>
Link: https://lore.kernel.org/CANBPYPjQVqmzZ4J=rVQX87a9iuwmaetULwbK_5_3YWk2eGzkaA@mail.gmail.com
Fixes:
|