mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-09-04 20:19:47 +08:00
d8f26717c9
518 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
![]() |
f8f931bba0 |
mm/thp: fix deferred split unqueue naming and locking
Recent changes are putting more pressure on THP deferred split queues: under load revealing long-standing races, causing list_del corruptions, "Bad page state"s and worse (I keep BUGs in both of those, so usually don't get to see how badly they end up without). The relevant recent changes being 6.8's mTHP, 6.10's mTHP swapout, and 6.12's mTHP swapin, improved swap allocation, and underused THP splitting. Before fixing locking: rename misleading folio_undo_large_rmappable(), which does not undo large_rmappable, to folio_unqueue_deferred_split(), which is what it does. But that and its out-of-line __callee are mm internals of very limited usability: add comment and WARN_ON_ONCEs to check usage; and return a bool to say if a deferred split was unqueued, which can then be used in WARN_ON_ONCEs around safety checks (sparing callers the arcane conditionals in __folio_unqueue_deferred_split()). Just omit the folio_unqueue_deferred_split() from free_unref_folios(), all of whose callers now call it beforehand (and if any forget then bad_page() will tell) - except for its caller put_pages_list(), which itself no longer has any callers (and will be deleted separately). Swapout: mem_cgroup_swapout() has been resetting folio->memcg_data 0 without checking and unqueueing a THP folio from deferred split list; which is unfortunate, since the split_queue_lock depends on the memcg (when memcg is enabled); so swapout has been unqueueing such THPs later, when freeing the folio, using the pgdat's lock instead: potentially corrupting the memcg's list. __remove_mapping() has frozen refcount to 0 here, so no problem with calling folio_unqueue_deferred_split() before resetting memcg_data. That goes back to 5.4 commit |
||
![]() |
617a814f14 |
ALong with the usual shower of singleton patches, notable patch series in
this pull request are: "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds consistency to the APIs and behaviour of these two core allocation functions. This also simplifies/enables Rustification. "Some cleanups for shmem" from Baolin Wang. No functional changes - mode code reuse, better function naming, logic simplifications. "mm: some small page fault cleanups" from Josef Bacik. No functional changes - code cleanups only. "Various memory tiering fixes" from Zi Yan. A small fix and a little cleanup. "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and simplifications and .text shrinkage. "Kernel stack usage histogram" from Pasha Tatashin and Shakeel Butt. This is a feature, it adds new feilds to /proc/vmstat such as $ grep kstack /proc/vmstat kstack_1k 3 kstack_2k 188 kstack_4k 11391 kstack_8k 243 kstack_16k 0 which tells us that 11391 processes used 4k of stack while none at all used 16k. Useful for some system tuning things, but partivularly useful for "the dynamic kernel stack project". "kmemleak: support for percpu memory leak detect" from Pavel Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory. "mm: memcg: page counters optimizations" from Roman Gushchin. "3 independent small optimizations of page counters". "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from David Hildenbrand. Improves PTE/PMD splitlock detection, makes powerpc/8xx work correctly by design rather than by accident. "mm: remove arch_make_page_accessible()" from David Hildenbrand. Some folio conversions which make arch_make_page_accessible() unneeded. "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David Finkel. Cleans up and fixes our handling of the resetting of the cgroup/process peak-memory-use detector. "Make core VMA operations internal and testable" from Lorenzo Stoakes. Rationalizaion and encapsulation of the VMA manipulation APIs. With a view to better enable testing of the VMA functions, even from a userspace-only harness. "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix issues in the zswap global shrinker, resulting in improved performance. "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill in some missing info in /proc/zoneinfo. "mm: replace follow_page() by folio_walk" from David Hildenbrand. Code cleanups and rationalizations (conversion to folio_walk()) resulting in the removal of follow_page(). "improving dynamic zswap shrinker protection scheme" from Nhat Pham. Some tuning to improve zswap's dynamic shrinker. Significant reductions in swapin and improvements in performance are shown. "mm: Fix several issues with unaccepted memory" from Kirill Shutemov. Improvements to the new unaccepted memory feature, "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on DAX PUDs. This was missing, although nobody seems to have notied yet. "Introduce a store type enum for the Maple tree" from Sidhartha Kumar. Cleanups and modest performance improvements for the maple tree library code. "memcg: further decouple v1 code from v2" from Shakeel Butt. Move more cgroup v1 remnants away from the v2 memcg code. "memcg: initiate deprecation of v1 features" from Shakeel Butt. Adds various warnings telling users that memcg v1 features are deprecated. "mm: swap: mTHP swap allocator base on swap cluster order" from Chris Li. Greatly improves the success rate of the mTHP swap allocation. "mm: introduce numa_memblks" from Mike Rapoport. Moves various disparate per-arch implementations of numa_memblk code into generic code. "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly improves the performance of munmap() of swap-filled ptes. "support large folio swap-out and swap-in for shmem" from Baolin Wang. With this series we no longer split shmem large folios into simgle-page folios when swapping out shmem. "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice performance improvements and code reductions for gigantic folios. "support shmem mTHP collapse" from Baolin Wang. Adds support for khugepaged's collapsing of shmem mTHP folios. "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect() performance regression due to the addition of mseal(). "Increase the number of bits available in page_type" from Matthew Wilcox. Increases the number of bits available in page_type! "Simplify the page flags a little" from Matthew Wilcox. Many legacy page flags are now folio flags, so the page-based flags and their accessors/mutators can be removed. "mm: store zero pages to be swapped out in a bitmap" from Usama Arif. An optimization which permits us to avoid writing/reading zero-filled zswap pages to backing store. "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race window which occurs when a MAP_FIXED operqtion is occurring during an unrelated vma tree walk. "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of the vma_merge() functionality, making ot cleaner, more testable and better tested. "misc fixups for DAMON {self,kunit} tests" from SeongJae Park. Minor fixups of DAMON selftests and kunit tests. "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang. Code cleanups and folio conversions. "Shmem mTHP controls and stats improvements" from Ryan Roberts. Cleanups for shmem controls and stats. "mm: count the number of anonymous THPs per size" from Barry Song. Expose additional anon THP stats to userspace for improved tuning. "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more folio conversions and removal of now-unused page-based APIs. "replace per-quota region priorities histogram buffer with per-context one" from SeongJae Park. DAMON histogram rationalization. "Docs/damon: update GitHub repo URLs and maintainer-profile" from SeongJae Park. DAMON documentation updates. "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and improve related doc and warn" from Jason Wang: fixes usage of page allocator __GFP_NOFAIL and GFP_ATOMIC flags. "mm: split underused THPs" from Yu Zhao. Improve THP=always policy - this was overprovisioning THPs in sparsely accessed memory areas. "zram: introduce custom comp backends API" frm Sergey Senozhatsky. Add support for zram run-time compression algorithm tuning. "mm: Care about shadow stack guard gap when getting an unmapped area" from Mark Brown. Fix up the various arch_get_unmapped_area() implementations to better respect guard areas. "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability of mem_cgroup_iter() and various code cleanups. "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge pfnmap support. "resource: Fix region_intersects() vs add_memory_driver_managed()" from Huang Ying. Fix a bug in region_intersects() for systems with CXL memory. "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches a couple more code paths to correctly recover from the encountering of poisoned memry. "mm: enable large folios swap-in support" from Barry Song. Support the swapin of mTHP memory into appropriately-sized folios, rather than into single-page folios. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZu1BBwAKCRDdBJ7gKXxA jlWNAQDYlqQLun7bgsAN4sSvi27VUuWv1q70jlMXTfmjJAvQqwD/fBFVR6IOOiw7 AkDbKWP2k0hWPiNJBGwoqxdHHx09Xgo= =s0T+ -----END PGP SIGNATURE----- Merge tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "Along with the usual shower of singleton patches, notable patch series in this pull request are: - "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds consistency to the APIs and behaviour of these two core allocation functions. This also simplifies/enables Rustification. - "Some cleanups for shmem" from Baolin Wang. No functional changes - mode code reuse, better function naming, logic simplifications. - "mm: some small page fault cleanups" from Josef Bacik. No functional changes - code cleanups only. - "Various memory tiering fixes" from Zi Yan. A small fix and a little cleanup. - "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and simplifications and .text shrinkage. - "Kernel stack usage histogram" from Pasha Tatashin and Shakeel Butt. This is a feature, it adds new feilds to /proc/vmstat such as $ grep kstack /proc/vmstat kstack_1k 3 kstack_2k 188 kstack_4k 11391 kstack_8k 243 kstack_16k 0 which tells us that 11391 processes used 4k of stack while none at all used 16k. Useful for some system tuning things, but partivularly useful for "the dynamic kernel stack project". - "kmemleak: support for percpu memory leak detect" from Pavel Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory. - "mm: memcg: page counters optimizations" from Roman Gushchin. "3 independent small optimizations of page counters". - "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from David Hildenbrand. Improves PTE/PMD splitlock detection, makes powerpc/8xx work correctly by design rather than by accident. - "mm: remove arch_make_page_accessible()" from David Hildenbrand. Some folio conversions which make arch_make_page_accessible() unneeded. - "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David Finkel. Cleans up and fixes our handling of the resetting of the cgroup/process peak-memory-use detector. - "Make core VMA operations internal and testable" from Lorenzo Stoakes. Rationalizaion and encapsulation of the VMA manipulation APIs. With a view to better enable testing of the VMA functions, even from a userspace-only harness. - "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix issues in the zswap global shrinker, resulting in improved performance. - "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill in some missing info in /proc/zoneinfo. - "mm: replace follow_page() by folio_walk" from David Hildenbrand. Code cleanups and rationalizations (conversion to folio_walk()) resulting in the removal of follow_page(). - "improving dynamic zswap shrinker protection scheme" from Nhat Pham. Some tuning to improve zswap's dynamic shrinker. Significant reductions in swapin and improvements in performance are shown. - "mm: Fix several issues with unaccepted memory" from Kirill Shutemov. Improvements to the new unaccepted memory feature, - "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on DAX PUDs. This was missing, although nobody seems to have notied yet. - "Introduce a store type enum for the Maple tree" from Sidhartha Kumar. Cleanups and modest performance improvements for the maple tree library code. - "memcg: further decouple v1 code from v2" from Shakeel Butt. Move more cgroup v1 remnants away from the v2 memcg code. - "memcg: initiate deprecation of v1 features" from Shakeel Butt. Adds various warnings telling users that memcg v1 features are deprecated. - "mm: swap: mTHP swap allocator base on swap cluster order" from Chris Li. Greatly improves the success rate of the mTHP swap allocation. - "mm: introduce numa_memblks" from Mike Rapoport. Moves various disparate per-arch implementations of numa_memblk code into generic code. - "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly improves the performance of munmap() of swap-filled ptes. - "support large folio swap-out and swap-in for shmem" from Baolin Wang. With this series we no longer split shmem large folios into simgle-page folios when swapping out shmem. - "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice performance improvements and code reductions for gigantic folios. - "support shmem mTHP collapse" from Baolin Wang. Adds support for khugepaged's collapsing of shmem mTHP folios. - "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect() performance regression due to the addition of mseal(). - "Increase the number of bits available in page_type" from Matthew Wilcox. Increases the number of bits available in page_type! - "Simplify the page flags a little" from Matthew Wilcox. Many legacy page flags are now folio flags, so the page-based flags and their accessors/mutators can be removed. - "mm: store zero pages to be swapped out in a bitmap" from Usama Arif. An optimization which permits us to avoid writing/reading zero-filled zswap pages to backing store. - "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race window which occurs when a MAP_FIXED operqtion is occurring during an unrelated vma tree walk. - "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of the vma_merge() functionality, making ot cleaner, more testable and better tested. - "misc fixups for DAMON {self,kunit} tests" from SeongJae Park. Minor fixups of DAMON selftests and kunit tests. - "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang. Code cleanups and folio conversions. - "Shmem mTHP controls and stats improvements" from Ryan Roberts. Cleanups for shmem controls and stats. - "mm: count the number of anonymous THPs per size" from Barry Song. Expose additional anon THP stats to userspace for improved tuning. - "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more folio conversions and removal of now-unused page-based APIs. - "replace per-quota region priorities histogram buffer with per-context one" from SeongJae Park. DAMON histogram rationalization. - "Docs/damon: update GitHub repo URLs and maintainer-profile" from SeongJae Park. DAMON documentation updates. - "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and improve related doc and warn" from Jason Wang: fixes usage of page allocator __GFP_NOFAIL and GFP_ATOMIC flags. - "mm: split underused THPs" from Yu Zhao. Improve THP=always policy. This was overprovisioning THPs in sparsely accessed memory areas. - "zram: introduce custom comp backends API" frm Sergey Senozhatsky. Add support for zram run-time compression algorithm tuning. - "mm: Care about shadow stack guard gap when getting an unmapped area" from Mark Brown. Fix up the various arch_get_unmapped_area() implementations to better respect guard areas. - "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability of mem_cgroup_iter() and various code cleanups. - "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge pfnmap support. - "resource: Fix region_intersects() vs add_memory_driver_managed()" from Huang Ying. Fix a bug in region_intersects() for systems with CXL memory. - "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches a couple more code paths to correctly recover from the encountering of poisoned memry. - "mm: enable large folios swap-in support" from Barry Song. Support the swapin of mTHP memory into appropriately-sized folios, rather than into single-page folios" * tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (416 commits) zram: free secondary algorithms names uprobes: turn xol_area->pages[2] into xol_area->page uprobes: introduce the global struct vm_special_mapping xol_mapping Revert "uprobes: use vm_special_mapping close() functionality" mm: support large folios swap-in for sync io devices mm: add nr argument in mem_cgroup_swapin_uncharge_swap() helper to support large folios mm: fix swap_read_folio_zeromap() for large folios with partial zeromap mm/debug_vm_pgtable: Use pxdp_get() for accessing page table entries set_memory: add __must_check to generic stubs mm/vma: return the exact errno in vms_gather_munmap_vmas() memcg: cleanup with !CONFIG_MEMCG_V1 mm/show_mem.c: report alloc tags in human readable units mm: support poison recovery from copy_present_page() mm: support poison recovery from do_cow_fault() resource, kunit: add test case for region_intersects() resource: make alloc_free_mem_region() works for iomem_resource mm: z3fold: deprecate CONFIG_Z3FOLD vfio/pci: implement huge_fault support mm/arm64: support large pfn mappings mm/x86: support large pfn mappings ... |
||
![]() |
2a058ab328 |
mm: change vmf_anon_prepare() to __vmf_anon_prepare()
Some callers of vmf_anon_prepare() may not want us to release the per-VMA
lock ourselves. Rename vmf_anon_prepare() to __vmf_anon_prepare() and let
the callers drop the lock when desired.
Also, make vmf_anon_prepare() a wrapper that releases the per-VMA lock
itself for any callers that don't care.
This is in preparation to fix this bug reported by syzbot:
https://lore.kernel.org/linux-mm/00000000000067c20b06219fbc26@google.com/
Link: https://lkml.kernel.org/r/20240914194243.245-1-vishal.moola@gmail.com
Fixes:
|
||
![]() |
24f937796c |
mm: remove putback_lru_page()
There are no more callers of putback_lru_page(), remove it. Link: https://lkml.kernel.org/r/20240826065814.1336616-7-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
775d28fd45 |
mm: remove isolate_lru_page()
There are no more callers of isolate_lru_page(), remove it. [wangkefeng.wang@huawei.com: convert page to folio in comment and document, per Matthew] Link: https://lkml.kernel.org/r/20240826144114.1928071-1-wangkefeng.wang@huawei.com Link: https://lkml.kernel.org/r/20240826065814.1336616-6-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
5c8525a37b |
mm: migrate_device: convert to migrate_device_coherent_folio()
Patch series "mm: finish isolate/putback_lru_page()". Convert to use more folios in migrate_device.c, then we could remove isolate_lru_page() and putback_lru_page(). This patch (of 6): Save a few calls to compound_head() and use folio throughout. Link: https://lkml.kernel.org/r/20240826065814.1336616-1-wangkefeng.wang@huawei.com Link: https://lkml.kernel.org/r/20240826065814.1336616-2-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
16038c4fff |
mm: memory-failure: add unmap_poisoned_folio()
Add unmap_poisoned_folio() helper which will be reused by do_migrate_range() from memory hotplug soon. [akpm@linux-foundation.org: whitespace tweak, per Miaohe Lin] Link: https://lkml.kernel.org/r/1f80c7e3-c30d-1ac1-6a36-d1a5f5907f7c@huawei.com Link: https://lkml.kernel.org/r/20240827114728.3212578-3-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Dan Carpenter <dan.carpenter@linaro.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
e27ad6560e |
printf: remove %pGt support
Patch series "Increase the number of bits available in page_type". Kent wants more than 16 bits in page_type, so I resurrected this old patch and expanded it a bit. It's a bit more efficient than our current scheme (1 4-byte insn vs 3 insns of 13 bytes total) to test a single page type. This patch (of 4): An upcoming patch will convert page type from being a bitfield to a single byte, so we will not be able to use %pG to print the page type any more. The printing of the symbolic name will be restored in that patch. Link: https://lkml.kernel.org/r/20240821173914.2270383-1-willy@infradead.org Link: https://lkml.kernel.org/r/20240821173914.2270383-2-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: David Hildenbrand <david@redhat.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
5b3db2b812 |
mm: remove can_modify_mm()
With no more users in the tree, we can finally remove can_modify_mm(). Link: https://lkml.kernel.org/r/20240817-mseal-depessimize-v3-6-d8d2e037df30@gmail.com Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Jeff Xu <jeffxu@chromium.org> Cc: Kees Cook <kees@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Shuah Khan <shuah@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
23c57d1fa2 |
mseal: replace can_modify_mm_madv with a vma variant
Replace can_modify_mm_madv() with a single vma variant, and associated checks in madvise. While we're at it, also invert the order of checks in: if (unlikely(is_ro_anon(vma) && !can_modify_vma(vma)) Checking if we can modify the vma itself (through vm_flags) is certainly cheaper than is_ro_anon() due to arch_vma_access_permitted() looking at e.g pkeys registers (with extra branches) in some architectures. This patch allows for partial madvise success when finding a sealed VMA, which historically has been allowed in Linux. Link: https://lkml.kernel.org/r/20240817-mseal-depessimize-v3-5-d8d2e037df30@gmail.com Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Jeff Xu <jeffxu@chromium.org> Cc: Kees Cook <kees@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Shuah Khan <shuah@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
bea67dcc5e |
mm: attempt to batch free swap entries for zap_pte_range()
Zhiguo reported that swap release could be a serious bottleneck during process exits[1]. With mTHP, we have the opportunity to batch free swaps. Thanks to the work of Chris and Kairui[2], I was able to achieve this optimization with minimal code changes by building on their efforts. If swap_count is 1, which is likely true as most anon memory are private, we can free all contiguous swap slots all together. Ran the below test program for measuring the bandwidth of munmap using zRAM and 64KiB mTHP: #include <sys/mman.h> #include <sys/time.h> #include <stdlib.h> unsigned long long tv_to_ms(struct timeval tv) { return tv.tv_sec * 1000 + tv.tv_usec / 1000; } main() { struct timeval tv_b, tv_e; int i; #define SIZE 1024*1024*1024 void *p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); if (!p) { perror("fail to get memory"); exit(-1); } madvise(p, SIZE, MADV_HUGEPAGE); memset(p, 0x11, SIZE); /* write to get mem */ madvise(p, SIZE, MADV_PAGEOUT); gettimeofday(&tv_b, NULL); munmap(p, SIZE); gettimeofday(&tv_e, NULL); printf("munmap in bandwidth: %ld bytes/ms\n", SIZE/(tv_to_ms(tv_e) - tv_to_ms(tv_b))); } The result is as below (munmap bandwidth): mm-unstable mm-unstable-with-patch round1 21053761 63161283 round2 21053761 63161283 round3 21053761 63161283 round4 20648881 67108864 round5 20648881 67108864 munmap bandwidth becomes 3X faster. [1] https://lore.kernel.org/linux-mm/20240731133318.527-1-justinjiang@vivo.com/ [2] https://lore.kernel.org/linux-mm/20240730-swap-allocator-v5-0-cb9c148b9297@kernel.org/ [v-songbaohua@oppo.com: check all swaps belong to same swap_cgroup in swap_pte_batch()] Link: https://lkml.kernel.org/r/20240815215308.55233-1-21cnbao@gmail.com [hughd@google.com: add mem_cgroup_disabled() check] Link: https://lkml.kernel.org/r/33f34a88-0130-5444-9b84-93198eeb50e7@google.com [21cnbao@gmail.com: add missing zswap_invalidate()] Link: https://lkml.kernel.org/r/20240821054921.43468-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240807215859.57491-3-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Kairui Song <kasong@tencent.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Barry Song <baohua@kernel.org> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
55ad43e8ba |
mm: add a helper to accept page
Accept a given struct page and add it free list. The help is useful for physical memory scanners that want to use free unaccepted memory. Link: https://lkml.kernel.org/r/20240809114854.3745464-7-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
727d50a7e0 |
mm/migrate: move common code to numa_migrate_check (was numa_migrate_prep)
do_numa_page() and do_huge_pmd_numa_page() share a lot of common code. To reduce redundancy, move common code to numa_migrate_prep() and rename the function to numa_migrate_check() to reflect its functionality. Now do_huge_pmd_numa_page() also checks shared folios to set TNF_SHARED flag. Link: https://lkml.kernel.org/r/20240809145906.1513458-4-ziy@nvidia.com Signed-off-by: Zi Yan <ziy@nvidia.com> Suggested-by: David Hildenbrand <david@redhat.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
49b1b8d6f6 |
mm: move internal core VMA manipulation functions to own file
This patch introduces vma.c and moves internal core VMA manipulation functions to this file from mmap.c. This allows us to isolate VMA functionality in a single place such that we can create userspace testing code that invokes this functionality in an environment where we can implement simple unit tests of core functionality. This patch ensures that core VMA functionality is explicitly marked as such by its presence in mm/vma.h. It also places the header includes required by vma.c in vma_internal.h, which is simply imported by vma.c. This makes the VMA functionality testable, as userland testing code can simply stub out functionality as required. Link: https://lkml.kernel.org/r/c77a6aafb4c42aaadb8e7271a853658cbdca2e22.1722251717.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Christian Brauner <brauner@kernel.org> Cc: David Gow <davidgow@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Jan Kara <jack@suse.cz> Cc: Kees Cook <kees@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Rae Moar <rmoar@google.com> Cc: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Pengfei Xu <pengfei.xu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
d61f0d5968 |
mm: move vma_shrink(), vma_expand() to internal header
The vma_shrink() and vma_expand() functions are internal VMA manipulation functions which we ought to abstract for use outside of memory management code. To achieve this, we replace shift_arg_pages() in fs/exec.c with an invocation of a new relocate_vma_down() function implemented in mm/mmap.c, which enables us to also move move_page_tables() and vma_iter_prev_range() to internal.h. The purpose of doing this is to isolate key VMA manipulation functions in order that we can both abstract them and later render them easily testable. Link: https://lkml.kernel.org/r/3cfcd9ec433e032a85f636fdc0d7d98fafbd19c5.1722251717.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Christian Brauner <brauner@kernel.org> Cc: David Gow <davidgow@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Jan Kara <jack@suse.cz> Cc: Kees Cook <kees@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Rae Moar <rmoar@google.com> Cc: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Pengfei Xu <pengfei.xu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
fa04c08f3c |
mm: move vma_modify() and helpers to internal header
These are core VMA manipulation functions which invoke VMA splitting and merging and should not be directly accessed from outside of mm/. Link: https://lkml.kernel.org/r/5efde0c6342a8860d5ffc90b415f3989fd8ed0b2.1722251717.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Christian Brauner <brauner@kernel.org> Cc: David Gow <davidgow@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Jan Kara <jack@suse.cz> Cc: Kees Cook <kees@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Rae Moar <rmoar@google.com> Cc: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Pengfei Xu <pengfei.xu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
8ef6fd0e9e |
Merge branch 'mm-hotfixes-stable' into mm-stable to pick up "mm: fix
crashes from deferred split racing folio migration", needed by "mm: migrate: split folio_migrate_mapping()". |
||
![]() |
f442fa6141 |
mm: gup: stop abusing try_grab_folio
A kernel warning was reported when pinning folio in CMA memory when
launching SEV virtual machine. The splat looks like:
[ 464.325306] WARNING: CPU: 13 PID: 6734 at mm/gup.c:1313 __get_user_pages+0x423/0x520
[ 464.325464] CPU: 13 PID: 6734 Comm: qemu-kvm Kdump: loaded Not tainted 6.6.33+ #6
[ 464.325477] RIP: 0010:__get_user_pages+0x423/0x520
[ 464.325515] Call Trace:
[ 464.325520] <TASK>
[ 464.325523] ? __get_user_pages+0x423/0x520
[ 464.325528] ? __warn+0x81/0x130
[ 464.325536] ? __get_user_pages+0x423/0x520
[ 464.325541] ? report_bug+0x171/0x1a0
[ 464.325549] ? handle_bug+0x3c/0x70
[ 464.325554] ? exc_invalid_op+0x17/0x70
[ 464.325558] ? asm_exc_invalid_op+0x1a/0x20
[ 464.325567] ? __get_user_pages+0x423/0x520
[ 464.325575] __gup_longterm_locked+0x212/0x7a0
[ 464.325583] internal_get_user_pages_fast+0xfb/0x190
[ 464.325590] pin_user_pages_fast+0x47/0x60
[ 464.325598] sev_pin_memory+0xca/0x170 [kvm_amd]
[ 464.325616] sev_mem_enc_register_region+0x81/0x130 [kvm_amd]
Per the analysis done by yangge, when starting the SEV virtual machine, it
will call pin_user_pages_fast(..., FOLL_LONGTERM, ...) to pin the memory.
But the page is in CMA area, so fast GUP will fail then fallback to the
slow path due to the longterm pinnalbe check in try_grab_folio().
The slow path will try to pin the pages then migrate them out of CMA area.
But the slow path also uses try_grab_folio() to pin the page, it will
also fail due to the same check then the above warning is triggered.
In addition, the try_grab_folio() is supposed to be used in fast path and
it elevates folio refcount by using add ref unless zero. We are guaranteed
to have at least one stable reference in slow path, so the simple atomic add
could be used. The performance difference should be trivial, but the
misuse may be confusing and misleading.
Redefined try_grab_folio() to try_grab_folio_fast(), and try_grab_page()
to try_grab_folio(), and use them in the proper paths. This solves both
the abuse and the kernel warning.
The proper naming makes their usecase more clear and should prevent from
abusing in the future.
peterx said:
: The user will see the pin fails, for gpu-slow it further triggers the WARN
: right below that failure (as in the original report):
:
: folio = try_grab_folio(page, page_increm - 1,
: foll_flags);
: if (WARN_ON_ONCE(!folio)) { <------------------------ here
: /*
: * Release the 1st page ref if the
: * folio is problematic, fail hard.
: */
: gup_put_folio(page_folio(page), 1,
: foll_flags);
: ret = -EFAULT;
: goto out;
: }
[1] https://lore.kernel.org/linux-mm/1719478388-31917-1-git-send-email-yangge1116@126.com/
[shy828301@gmail.com: fix implicit declaration of function try_grab_folio_fast]
Link: https://lkml.kernel.org/r/CAHbLzkowMSso-4Nufc9hcMehQsK9PNz3OSu-+eniU-2Mm-xjhA@mail.gmail.com
Link: https://lkml.kernel.org/r/20240628191458.2605553-1-yang@os.amperecomputing.com
Fixes:
|
||
![]() |
593a10dabe |
mm: refactor folio_undo_large_rmappable()
Folios of order <= 1 are not in deferred list, the check of order is added
into folio_undo_large_rmappable() from commit
|
||
![]() |
13c526540b |
mm: pass meminit_context to __free_pages_core()
Patch series "mm/memory_hotplug: use PageOffline() instead of PageReserved() for !ZONE_DEVICE". This can be a considered a long-overdue follow-up to some parts of [1]. The patches are based on [2], but they are not strictly required -- just makes it clearer why we can use adjust_managed_page_count() for memory hotplug without going into details about highmem. We stop initializing pages with PageReserved() in memory hotplug code -- except when dealing with ZONE_DEVICE for now. Instead, we use PageOffline(): all pages are initialized to PageOffline() when onlining a memory section, and only the ones actually getting exposed to the system/page allocator will get PageOffline cleared. This way, we enlighten memory hotplug more about PageOffline() pages and can cleanup some hacks we have in virtio-mem code. What about ZONE_DEVICE? PageOffline() is wrong, but we might just stop using PageReserved() for them later by simply checking for is_zone_device_page() at suitable places. That will be a separate patch set / proposal. This primarily affects virtio-mem, HV-balloon and XEN balloon. I only briefly tested with virtio-mem, which benefits most from these cleanups. [1] https://lore.kernel.org/all/20191024120938.11237-1-david@redhat.com/ [2] https://lkml.kernel.org/r/20240607083711.62833-1-david@redhat.com This patch (of 3): In preparation for further changes, let's teach __free_pages_core() about the differences of memory hotplug handling. Move the memory hotplug specific handling from generic_online_page() to __free_pages_core(), use adjust_managed_page_count() on the memory hotplug path, and spell out why memory freed via memblock cannot currently use adjust_managed_page_count(). [david@redhat.com: add missed CONFIG_DEFERRED_STRUCT_PAGE_INIT] Link: https://lkml.kernel.org/r/b72e6efd-fb0a-459c-b1a0-88a98e5b19e2@redhat.com [david@redhat.com: fix up the memblock comment, per Oscar] Link: https://lkml.kernel.org/r/2ed64218-7f3b-4302-a5dc-27f060654fe2@redhat.com [david@redhat.com: add the parameter name also in the declaration] Link: https://lkml.kernel.org/r/ca575956-f0dd-4fb9-a307-6b7621681ed9@redhat.com Link: https://lkml.kernel.org/r/20240607090939.89524-1-david@redhat.com Link: https://lkml.kernel.org/r/20240607090939.89524-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eugenio Pérez <eperezma@redhat.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Marco Elver <elver@google.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Wei Liu <wei.liu@kernel.org> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
8f75267d22 |
mm: rename alloc_demote_folio to alloc_migrate_folio
The alloc_demote_folio can also be used for general migration including both demotion and promotion so it'd be better to rename it from alloc_demote_folio to alloc_migrate_folio. Link: https://lkml.kernel.org/r/20240614030010.751-3-honggyu.kim@sk.com Signed-off-by: Honggyu Kim <honggyu.kim@sk.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: Gregory Price <gregory.price@memverge.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Hyeongtak Ji <hyeongtak.ji@sk.com> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Rakie Kim <rakie.kim@sk.com> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
a00ce85af2 |
mm: make alloc_demote_folio externally invokable for migration
Patch series "DAMON based tiered memory management for CXL memory", v6. Introduction ============ With the advent of CXL/PCIe attached DRAM, which will be called simply as CXL memory in this cover letter, some systems are becoming more heterogeneous having memory systems with different latency and bandwidth characteristics. They are usually handled as different NUMA nodes in separate memory tiers and CXL memory is used as slow tiers because of its protocol overhead compared to local DRAM. In this kind of systems, we need to be careful placing memory pages on proper NUMA nodes based on the memory access frequency. Otherwise, some frequently accessed pages might reside on slow tiers and it makes performance degradation unexpectedly. Moreover, the memory access patterns can be changed at runtime. To handle this problem, we need a way to monitor the memory access patterns and migrate pages based on their access temperature. The DAMON(Data Access MONitor) framework and its DAMOS(DAMON-based Operation Schemes) can be useful features for monitoring and migrating pages. DAMOS provides multiple actions based on DAMON monitoring results and it can be used for proactive reclaim, which means swapping cold pages out with DAMOS_PAGEOUT action, but it doesn't support migration actions such as demotion and promotion between tiered memory nodes. This series supports two new DAMOS actions; DAMOS_MIGRATE_HOT for promotion from slow tiers and DAMOS_MIGRATE_COLD for demotion from fast tiers. This prevents hot pages from being stuck on slow tiers, which makes performance degradation and cold pages can be proactively demoted to slow tiers so that the system can increase the chance to allocate more hot pages to fast tiers. The DAMON provides various tuning knobs but we found that the proactive demotion for cold pages is especially useful when the system is running out of memory on its fast tier nodes. Our evaluation result shows that it reduces the performance slowdown compared to the default memory policy from 11% to 3~5% when the system runs under high memory pressure on its fast tier DRAM nodes. DAMON configuration =================== The specific DAMON configuration doesn't have to be in the scope of this patch series, but some rough idea is better to be shared to explain the evaluation result. The DAMON provides many knobs for fine tuning but its configuration file is generated by HMSDK[3]. It includes gen_config.py script that generates a json file with the full config of DAMON knobs and it creates multiple kdamonds for each NUMA node when the DAMON is enabled so that it can run hot/cold based migration for tiered memory. Evaluation Workload =================== The performance evaluation is done with redis[4], which is a widely used in-memory database and the memory access patterns are generated via YCSB[5]. We have measured two different workloads with zipfian and latest distributions but their configs are slightly modified to make memory usage higher and execution time longer for better evaluation. The idea of evaluation using these migrate_{hot,cold} actions covers system-wide memory management rather than partitioning hot/cold pages of a single workload. The default memory allocation policy creates pages to the fast tier DRAM node first, then allocates newly created pages to the slow tier CXL node when the DRAM node has insufficient free space. Once the page allocation is done then those pages never move between NUMA nodes. It's not true when using numa balancing, but it is not the scope of this DAMON based tiered memory management support. If the working set of redis can be fit fully into the DRAM node, then the redis will access the fast DRAM only. Since the performance of DRAM only is faster than partially accessing CXL memory in slow tiers, this environment is not useful to evaluate this patch series. To make pages of redis be distributed across fast DRAM node and slow CXL node to evaluate our migrate_{hot,cold} actions, we pre-allocate some cold memory externally using mmap and memset before launching redis-server. We assumed that there are enough amount of cold memory in datacenters as TMO[6] and TPP[7] papers mentioned. The evaluation sequence is as follows. 1. Turn on DAMON with DAMOS_MIGRATE_COLD action for DRAM node and DAMOS_MIGRATE_HOT action for CXL node. It demotes cold pages on DRAM node and promotes hot pages on CXL node in a regular interval. 2. Allocate a huge block of cold memory by calling mmap and memset at the fast tier DRAM node, then make the process sleep to make the fast tier has insufficient space for redis-server. 3. Launch redis-server and load prebaked snapshot image, dump.rdb. The redis-server consumes 52GB of anon pages and 33GB of file pages, but due to the cold memory allocated at 2, it fails allocating the entire memory of redis-server on the fast tier DRAM node so it partially allocates the remaining on the slow tier CXL node. The ratio of DRAM:CXL depends on the size of the pre-allocated cold memory. 4. Run YCSB to make zipfian or latest distribution of memory accesses to redis-server, then measure its execution time when it's completed. 5. Repeat 4 over 50 times to measure the average execution time for each run. 6. Increase the cold memory size then repeat goes to 2. For each test at 4 took about a minute so repeating it 50 times almost took about 1 hour for each test with a specific cold memory from 440GB to 500GB in 10GB increments for each evaluation. So it took about more than 10 hours for both zipfian and latest workloads to get the entire evaluation results. Repeating the same test set multiple times doesn't show much difference so I think it might be enough to make the result reliable. Evaluation Results ================== All the result values are normalized to DRAM-only execution time because the workload cannot be faster than DRAM-only unless the workload hits the peak bandwidth but our redis test doesn't go beyond the bandwidth limit. So the DRAM-only execution time is the ideal result without affected by the gap between DRAM and CXL performance difference. The NUMA node environment is as follows. node0 - local DRAM, 512GB with a CPU socket (fast tier) node1 - disabled node2 - CXL DRAM, 96GB, no CPU attached (slow tier) The following is the result of generating zipfian distribution to redis-server and the numbers are averaged by 50 times of execution. 1. YCSB zipfian distribution read only workload memory pressure with cold memory on node0 with 512GB of local DRAM. ====================+================================================+========= | cold memory occupied by mmap and memset | | 0G 440G 450G 460G 470G 480G 490G 500G | ====================+================================================+========= Execution time normalized to DRAM-only values | GEOMEAN --------------------+------------------------------------------------+--------- DRAM-only | 1.00 - - - - - - - | 1.00 CXL-only | 1.19 - - - - - - - | 1.19 default | - 1.00 1.05 1.08 1.12 1.14 1.18 1.18 | 1.11 DAMON tiered | - 1.03 1.03 1.03 1.03 1.03 1.07 *1.05 | 1.04 DAMON lazy | - 1.04 1.03 1.04 1.05 1.06 1.06 *1.06 | 1.05 ====================+================================================+========= CXL usage of redis-server in GB | AVERAGE --------------------+------------------------------------------------+--------- DRAM-only | 0.0 - - - - - - - | 0.0 CXL-only | 51.4 - - - - - - - | 51.4 default | - 0.6 10.6 20.5 30.5 40.5 47.6 50.4 | 28.7 DAMON tiered | - 0.6 0.5 0.4 0.7 0.8 7.1 5.6 | 2.2 DAMON lazy | - 0.5 3.0 4.5 5.4 6.4 9.4 9.1 | 5.5 ====================+================================================+========= Each test result is based on the execution environment as follows. DRAM-only: redis-server uses only local DRAM memory. CXL-only: redis-server uses only CXL memory. default: default memory policy(MPOL_DEFAULT). numa balancing disabled. DAMON tiered: DAMON enabled with DAMOS_MIGRATE_COLD for DRAM nodes and DAMOS_MIGRATE_HOT for CXL nodes. DAMON lazy: same as DAMON tiered, but turn on DAMON just before making memory access request via YCSB. The above result shows the "default" execution time goes up as the size of cold memory is increased from 440G to 500G because the more cold memory used, the more CXL memory is used for the target redis workload and this makes the execution time increase. However, "DAMON tiered" and other DAMON results show less slowdown because the DAMOS_MIGRATE_COLD action at DRAM node proactively demotes pre-allocated cold memory to CXL node and this free space at DRAM increases more chance to allocate hot or warm pages of redis-server to fast DRAM node. Moreover, DAMOS_MIGRATE_HOT action at CXL node also promotes hot pages of redis-server to DRAM node actively. As a result, it makes more memory of redis-server stay in DRAM node compared to "default" memory policy and this makes the performance improvement. Please note that the result numbers of "DAMON tiered" and "DAMON lazy" at 500G are marked with * stars, which means their test results are replaced with reproduced tests that didn't have OOM issue. That was needed because sometimes the test processes get OOM when DRAM has insufficient space. The DAMOS_MIGRATE_HOT doesn't kick reclaim but just gives up migration when there is not enough space at DRAM side. The problem happens when there is competition between normal allocation and migration and the migration is done before normal allocation, then the completely unrelated normal allocation can trigger reclaim, which incurs OOM. Because of this issue, I have also tested more cases with "demotion_enabled" flag enabled to make such reclaim doesn't trigger OOM, but just demote reclaimed pages. The following test results show more tests with "kswapd" marked. 2. YCSB zipfian distribution read only workload (with demotion_enabled true) memory pressure with cold memory on node0 with 512GB of local DRAM. ====================+================================================+========= | cold memory occupied by mmap and memset | | 0G 440G 450G 460G 470G 480G 490G 500G | ====================+================================================+========= Execution time normalized to DRAM-only values | GEOMEAN --------------------+------------------------------------------------+--------- DAMON tiered | - 1.03 1.03 1.03 1.03 1.03 1.07 1.05 | 1.04 DAMON lazy | - 1.04 1.03 1.04 1.05 1.06 1.06 1.06 | 1.05 DAMON tiered kswapd | - 1.03 1.03 1.03 1.03 1.02 1.02 1.03 | 1.03 DAMON lazy kswapd | - 1.04 1.04 1.04 1.03 1.05 1.04 1.05 | 1.04 ====================+================================================+========= CXL usage of redis-server in GB | AVERAGE --------------------+------------------------------------------------+--------- DAMON tiered | - 0.6 0.5 0.4 0.7 0.8 7.1 5.6 | 2.2 DAMON lazy | - 0.5 3.0 4.5 5.4 6.4 9.4 9.1 | 5.5 DAMON tiered kswapd | - 0.0 0.0 0.4 0.5 0.1 0.8 1.0 | 0.4 DAMON lazy kswapd | - 4.2 4.6 5.3 1.7 6.8 8.1 5.8 | 5.2 ====================+================================================+========= Each test result is based on the exeuction environment as follows. DAMON tiered: same as before DAMON lazy: same as before DAMON tiered kswapd: same as DAMON tiered, but turn on /sys/kernel/mm/numa/demotion_enabled to make kswapd or direct reclaim does demotion. DAMON lazy kswapd: same as DAMON lazy, but turn on /sys/kernel/mm/numa/demotion_enabled to make kswapd or direct reclaim does demotion. The "DAMON tiered kswapd" and "DAMON lazy kswapd" didn't trigger OOM at all unlike other tests because kswapd and direct reclaim from DRAM node can demote reclaimed pages to CXL node independently from DAMON actions and their results are slightly better than without having "demotion_enabled". In summary, the evaluation results show that DAMON memory management with DAMOS_MIGRATE_{HOT,COLD} actions reduces the performance slowdown compared to the "default" memory policy from 11% to 3~5% when the system runs with high memory pressure on its fast tier DRAM nodes. Having these DAMOS_MIGRATE_HOT and DAMOS_MIGRATE_COLD actions can make tiered memory systems run more efficiently under high memory pressures. This patch (of 7): The alloc_demote_folio can be used out of vmscan.c so it'd be better to remove static keyword from it. Link: https://lkml.kernel.org/r/20240614030010.751-1-honggyu.kim@sk.com Link: https://lkml.kernel.org/r/20240614030010.751-2-honggyu.kim@sk.com Signed-off-by: Honggyu Kim <honggyu.kim@sk.com> Reviewed-by: SeongJae Park <sj@kernel.org> Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Gregory Price <gregory.price@memverge.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Hyeongtak Ji <hyeongtak.ji@sk.com> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Rakie Kim <rakie.kim@sk.com> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
3a78f77fd1 |
mm/memory-failure: move some function declarations into internal.h
There are some functions only used inside mm. Move them into internal.h. No functional change intended. Link: https://lkml.kernel.org/r/20240612071835.157004-11-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202405251049.hxjwX7zO-lkp@intel.com/ Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: David Hildenbrand <david@redhat.com> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
f38ee28519 |
mm: introduce pmd|pte_needs_soft_dirty_wp helpers for softdirty write-protect
Patch series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers and utilize them", v2. This patchset introduces the pte_need_soft_dirty_wp and pmd_need_soft_dirty_wp helpers to determine if write protection is required for softdirty tracking. These helpers enhance code readability and improve the overall appearance. They are then utilized in gup, mprotect, swap, and other related functions. This patch (of 2): This patch introduces the pte_needs_soft_dirty_wp and pmd_needs_soft_dirty_wp helpers to determine if write protection is required for softdirty tracking. This can enhance code readability and improve its overall appearance. These new helpers are then utilized in gup, huge_memory, and mprotect. Link: https://lkml.kernel.org/r/20240607211358.4660-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240607211358.4660-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Suggested-by: David Hildenbrand <david@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Chris Li <chrisl@kernel.org> Cc: Kairui Song <kasong@tencent.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
3f9abcaa3e |
mm: introduce pte_move_swp_offset() helper which can move offset bidirectionally
There could arise a necessity to obtain the first pte_t from a swap pte_t located in the middle. For instance, this may occur within the context of do_swap_page(), where a page fault can potentially occur in any PTE of a large folio. To address this, the following patch introduces pte_move_swp_offset(), a function capable of bidirectional movement by a specified delta argument. Consequently, pte_next_swp_offset() will directly invoke it with delta = 1. Link: https://lkml.kernel.org/r/20240529082824.150954-4-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Suggested-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chuanhua Han <hanchuanhua@oppo.com> Cc: David Hildenbrand <david@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Gao Xiang <xiang@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Len Brown <len.brown@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
3577dbb192 |
mm: batch unlink_file_vma calls in free_pgd_range
Execs of dynamically linked binaries at 20-ish cores are bottlenecked on the i_mmap_rwsem semaphore, while the biggest singular contributor is free_pgd_range inducing the lock acquire back-to-back for all consecutive mappings of a given file. Tracing the count of said acquires while building the kernel shows: [1, 2) 799579 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@| [2, 3) 0 | | [3, 4) 3009 | | [4, 5) 3009 | | [5, 6) 326442 |@@@@@@@@@@@@@@@@@@@@@ | So in particular there were 326442 opportunities to coalesce 5 acquires into 1. Doing so increases execs per second by 4% (~50k to ~52k) when running the benchmark linked below. The lock remains the main bottleneck, I have not looked at other spots yet. Bench can be found here: http://apollo.backplane.com/DFlyMisc/doexec.c $ cc -O2 -o shared-doexec doexec.c $ ./shared-doexec $(nproc) Note this particular test makes sure binaries are separate, but the loader is shared. Stats collected on the patched kernel (+ "noinline") with: bpftrace -e 'kprobe:unlink_file_vma_batch_process { @ = lhist(((struct unlink_vma_file_batch *)arg0)->count, 0, 8, 1); }' Link: https://lkml.kernel.org/r/20240521234321.359501-1-mjguzik@gmail.com Signed-off-by: Mateusz Guzik <mjguzik@gmail.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
399ab86ea5 |
/proc/pid/smaps: add mseal info for vma
Add sl in /proc/pid/smaps to indicate vma is sealed
Link: https://lkml.kernel.org/r/20240614232014.806352-2-jeffxu@google.com
Fixes:
|
||
![]() |
384a746bb5 |
Revert "mm: init_mlocked_on_free_v3"
There was insufficient review and no agreement that this is the right
approach.
There are serious flaws with the implementation that make processes using
mlock() not even work with simple fork() [1] and we get reliable crashes
when rebooting.
Further, simply because we might be unmapping a single PTE of a large
mlocked folio, we shouldn't zero out the whole folio.
... especially because the code can also *corrupt* urelated memory because
kernel_init_pages(page, folio_nr_pages(folio));
Could end up writing outside of the actual folio if we work with a tail
page.
Let's revert it. Once there is agreement that this is the right approach,
the issues were fixed and there was reasonable review and proper testing,
we can consider it again.
[1] https://lkml.kernel.org/r/4da9da2f-73e4-45fd-b62f-a8a513314057@redhat.com
Link: https://lkml.kernel.org/r/20240605091710.38961-1-david@redhat.com
Fixes:
|
||
![]() |
8be7258aad |
mseal: add mseal syscall
The new mseal() is an syscall on 64 bit CPU, and with following signature: int mseal(void addr, size_t len, unsigned long flags) addr/len: memory range. flags: reserved. mseal() blocks following operations for the given memory range. 1> Unmapping, moving to another location, and shrinking the size, via munmap() and mremap(), can leave an empty space, therefore can be replaced with a VMA with a new set of attributes. 2> Moving or expanding a different VMA into the current location, via mremap(). 3> Modifying a VMA via mmap(MAP_FIXED). 4> Size expansion, via mremap(), does not appear to pose any specific risks to sealed VMAs. It is included anyway because the use case is unclear. In any case, users can rely on merging to expand a sealed VMA. 5> mprotect() and pkey_mprotect(). 6> Some destructive madvice() behaviors (e.g. MADV_DONTNEED) for anonymous memory, when users don't have write permission to the memory. Those behaviors can alter region contents by discarding pages, effectively a memset(0) for anonymous memory. Following input during RFC are incooperated into this patch: Jann Horn: raising awareness and providing valuable insights on the destructive madvise operations. Linus Torvalds: assisting in defining system call signature and scope. Liam R. Howlett: perf optimization. Theo de Raadt: sharing the experiences and insight gained from implementing mimmutable() in OpenBSD. Finally, the idea that inspired this patch comes from Stephen Röttger's work in Chrome V8 CFI. [jeffxu@chromium.org: add branch prediction hint, per Pedro] Link: https://lkml.kernel.org/r/20240423192825.1273679-2-jeffxu@chromium.org Link: https://lkml.kernel.org/r/20240415163527.626541-3-jeffxu@chromium.org Signed-off-by: Jeff Xu <jeffxu@chromium.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Pedro Falcato <pedro.falcato@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Jann Horn <jannh@google.com> Cc: Jeff Xu <jeffxu@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jorge Lucangeli Obes <jorgelo@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Pedro Falcato <pedro.falcato@gmail.com> Cc: Stephen Röttger <sroettger@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Amer Al Shanawany <amer.shanawany@gmail.com> Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
14f5be2a2d |
mm/vmscan: remove ignore_references argument of reclaim_pages()
All reclaim_pages() callers are setting 'ignore_references' parameter 'true'. In other words, the parameter is not really being used. Remove the argument to make it simple. Link: https://lkml.kernel.org/r/20240429224451.67081-4-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
fed5348ee2 |
mm/memory-failure: convert shake_page() to shake_folio()
Removes two calls to compound_head(). Move the prototype to internal.h; we definitely don't want code outside mm using it. Link: https://lkml.kernel.org/r/20240412193510.2356957-6-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Jane Chu <jane.chu@oracle.com> Acked-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
96ebdb0320 |
mm/memory: add any_dirty optional pointer to folio_pte_batch()
This commit adds the any_dirty pointer as an optional parameter to folio_pte_batch() function. By using both the any_young and any_dirty pointers, madvise_free can make smarter decisions about whether to clear the PTEs when marking large folios as lazyfree. Link: https://lkml.kernel.org/r/20240418134435.6092-4-ioworker0@gmail.com Signed-off-by: Lance Yang <ioworker0@gmail.com> Suggested-by: David Hildenbrand <david@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Jeff Xie <xiehuan09@gmail.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Peter Xu <peterx@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
05c5323b2a |
mm: track mapcount of large folios in single value
Let's track the mapcount of large folios in a single value. The mapcount of a large folio currently corresponds to the sum of the entire mapcount and all page mapcounts. This sum is what we actually want to know in folio_mapcount() and it is also sufficient for implementing folio_mapped(). With PTE-mapped THP becoming more important and more widely used, we want to avoid looping over all pages of a folio just to obtain the mapcount of large folios. The comment "In the common case, avoid the loop when no pages mapped by PTE" in folio_total_mapcount() does no longer hold for mTHP that are always mapped by PTE. Further, we are planning on using folio_mapcount() more frequently, and might even want to remove page mapcounts for large folios in some kernel configs. Therefore, allow for reading the mapcount of large folios efficiently and atomically without looping over any pages. Maintain the mapcount also for hugetlb pages for simplicity. Use the new mapcount to implement folio_mapcount() and folio_mapped(). Make page_mapped() simply call folio_mapped(). We can now get rid of folio_large_is_mapped(). _nr_pages_mapped is now only used in rmap code and for debugging purposes. Keep folio_nr_pages_mapped() around, but document that its use should be limited to rmap internals and debugging purposes. This change implies one additional atomic add/sub whenever mapping/unmapping (parts of) a large folio. As we now batch RMAP operations for PTE-mapped THP during fork(), during unmap/zap, and when PTE-remapping a PMD-mapped THP, and we adjust the large mapcount for a PTE batch only once, the added overhead in the common case is small. Only when unmapping individual pages of a large folio (e.g., during COW), the overhead might be bigger in comparison, but it's essentially one additional atomic operation. Note that before the new mapcount would overflow, already our refcount would overflow: each mapping requires a folio reference. Extend the focumentation of folio_mapcount(). Link: https://lkml.kernel.org/r/20240409192301.907377-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Yin Fengwei <fengwei.yin@intel.com> Cc: Chris Zankel <chris@zankel.net> Cc: Hugh Dickins <hughd@google.com> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Richard Chang <richardycc@google.com> Cc: Rich Felker <dalias@libc.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
9f100e3b37 |
mm: convert free_zone_device_page to free_zone_device_folio
Both callers already have a folio; pass it in and save a few calls to compound_head(). Link: https://lkml.kernel.org/r/20240405153228.2563754-6-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
25176ad09c |
mm/treewide: rename CONFIG_HAVE_FAST_GUP to CONFIG_HAVE_GUP_FAST
Nowadays, we call it "GUP-fast", the external interface includes functions like "get_user_pages_fast()", and we renamed all internal functions to reflect that as well. Let's make the config option reflect that. Link: https://lkml.kernel.org/r/20240402125516.223131-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
3931b871c4 |
mm: madvise: avoid split during MADV_PAGEOUT and MADV_COLD
Rework madvise_cold_or_pageout_pte_range() to avoid splitting any large folio that is fully and contiguously mapped in the pageout/cold vm range. This change means that large folios will be maintained all the way to swap storage. This both improves performance during swap-out, by eliding the cost of splitting the folio, and sets us up nicely for maintaining the large folio when it is swapped back in (to be covered in a separate series). Folios that are not fully mapped in the target range are still split, but note that behavior is changed so that if the split fails for any reason (folio locked, shared, etc) we now leave it as is and move to the next pte in the range and continue work on the proceeding folios. Previously any failure of this sort would cause the entire operation to give up and no folios mapped at higher addresses were paged out or made cold. Given large folios are becoming more common, this old behavior would have likely lead to wasted opportunities. While we are at it, change the code that clears young from the ptes to use ptep_test_and_clear_young(), via the new mkold_ptes() batch helper function. This is more efficent than get_and_clear/modify/set, especially for contpte mappings on arm64, where the old approach would require unfolding/refolding and the new approach can be done in place. Link: https://lkml.kernel.org/r/20240408183946.2991168-8-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Barry Song <v-songbaohua@oppo.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
a62fb92ac1 |
mm: swap: free_swap_and_cache_nr() as batched free_swap_and_cache()
Now that we no longer have a convenient flag in the cluster to determine if a folio is large, free_swap_and_cache() will take a reference and lock a large folio much more often, which could lead to contention and (e.g.) failure to split large folios, etc. Let's solve that problem by batch freeing swap and cache with a new function, free_swap_and_cache_nr(), to free a contiguous range of swap entries together. This allows us to first drop a reference to each swap slot before we try to release the cache folio. This means we only try to release the folio once, only taking the reference and lock once - much better than the previous 512 times for the 2M THP case. Contiguous swap entries are gathered in zap_pte_range() and madvise_free_pte_range() in a similar way to how present ptes are already gathered in zap_pte_range(). While we are at it, let's simplify by converting the return type of both functions to void. The return value was used only by zap_pte_range() to print a bad pte, and was ignored by everyone else, so the extra reporting wasn't exactly guaranteed. We will still get the warning with most of the information from get_swap_device(). With the batch version, we wouldn't know which pte was bad anyway so could print the wrong one. [ryan.roberts@arm.com: fix a build warning on parisc] Link: https://lkml.kernel.org/r/20240409111840.3173122-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20240408183946.2991168-3-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
e0abfbb671 |
mm: rename vma_pgoff_address back to vma_address
With all callers converted, we can use the nice shorter name. Take this opportunity to reorder the arguments to the logical order (larger object first). Link: https://lkml.kernel.org/r/20240328225831.1765286-4-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
412ad5fbe9 |
mm: remove vma_address()
Convert the three remaining callers to call vma_pgoff_address() directly. This removes an ambiguity where we'd check just one page if passed a tail page and all N pages if passed a head page. Also add better kernel-doc for vma_pgoff_address(). Link: https://lkml.kernel.org/r/20240328225831.1765286-3-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
ba42b524a0 |
mm: init_mlocked_on_free_v3
Implements the "init_mlocked_on_free" boot option. When this boot option
is enabled, any mlock'ed pages are zeroed on free. If
the pages are munlock'ed beforehand, no initialization takes place.
This boot option is meant to combat the performance hit of
"init_on_free" as reported in commit
|
||
![]() |
c0bff412e6 |
mm: allow anon exclusive check over hugetlb tail pages
PageAnonExclusive() used to forbid tail pages for hugetlbfs, as that used
to be called mostly in hugetlb specific paths and the head page was
guaranteed.
As we move forward towards merging hugetlb paths into generic mm, we may
start to pass in tail hugetlb pages (when with cont-pte/cont-pmd huge
pages) for such check. Allow it to properly fetch the head, in which case
the anon-exclusiveness of the head will always represents the tail page.
There's already a sign of it when we look at the GUP-fast which already
contain the hugetlb processing altogether: we used to have a specific
commit
|
||
![]() |
4418c522f6 |
mm/gup: handle huge pmd for follow_pmd_mask()
Replace pmd_trans_huge() with pmd_leaf() to also cover pmd_huge() as long as enabled. FOLL_TOUCH and FOLL_SPLIT_PMD only apply to THP, not yet huge. Since now follow_trans_huge_pmd() can process hugetlb pages, renaming it into follow_huge_pmd() to match what it does. Move it into gup.c so not depend on CONFIG_THP. When at it, move the ctx->page_mask setup into follow_huge_pmd(), only set it when the page is valid. It was not a bug to set it before even if GUP failed (page==NULL), because follow_page_mask() callers always ignores page_mask if so. But doing so makes the code cleaner. [peterx@redhat.com: allow follow_pmd_mask() to take hugetlb tail pages] Link: https://lkml.kernel.org/r/20240403013249.1418299-3-peterx@redhat.com Link: https://lkml.kernel.org/r/20240327152332.950956-12-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Jones <andrew.jones@linux.dev> Cc: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Mike Rapoport (IBM)" <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
1b16761802 |
mm/gup: handle huge pud for follow_pud_mask()
Teach follow_pud_mask() to be able to handle normal PUD pages like hugetlb. Rename follow_devmap_pud() to follow_huge_pud() so that it can process either huge devmap or hugetlb. Move it out of TRANSPARENT_HUGEPAGE_PUD and and huge_memory.c (which relies on CONFIG_THP). Switch to pud_leaf() to detect both cases in the slow gup. In the new follow_huge_pud(), taking care of possible CoR for hugetlb if necessary. touch_pud() needs to be moved out of huge_memory.c to be accessable from gup.c even if !THP. Since at it, optimize the non-present check by adding a pud_present() early check before taking the pgtable lock, failing the follow_page() early if PUD is not present: that is required by both devmap or hugetlb. Use pud_huge() to also cover the pud_devmap() case. One more trivial thing to mention is, introduce "pud_t pud" in the code paths along the way, so the code doesn't dereference *pudp multiple time. Not only because that looks less straightforward, but also because if the dereference really happened, it's not clear whether there can be race to see different *pudp values when it's being modified at the same time. Setting ctx->page_mask properly for a PUD entry. As a side effect, this patch should also be able to optimize devmap GUP on PUD to be able to jump over the whole PUD range, but not yet verified. Hugetlb already can do so prior to this patch. Link: https://lkml.kernel.org/r/20240327152332.950956-11-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Jones <andrew.jones@linux.dev> Cc: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Mike Rapoport (IBM)" <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
b84fd2835c |
mm: make page_mapped() take a const argument
None of the functions called by page_mapped() modify the page or folio, so mark them all as const. Link: https://lkml.kernel.org/r/20240326171045.410737-7-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
d4e6b397be |
mm/mmap: convert all mas except mas_detach to vma iterator
There are two types of iterators mas and vmi in the current code. If the maple tree comes from the mm structure, we can use the vma iterator. Avoid using mas directly as possible. Keep using mas for the mt_detach tree, since it doesn't come from the mm structure. Remove as many uses of mas as possible, but we will still have a few that must be passed through in unmap_vmas() and free_pgtables(). Also introduce vma_iter_reset, vma_iter_{prev, next}_range_limit and vma_iter_area_{lowest, highest} helper functions for using the vma interator. Link: https://lkml.kernel.org/r/20240325063258.1437618-1-yajun.deng@linux.dev Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Tested-by: Helge Deller <deller@gmx.de> [parisc] Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
f238b8c33c |
arm64: mm: swap: support THP_SWAP on hardware with MTE
Commit
|
||
![]() |
e42dfe4e0a |
mm: record the migration reason for struct migration_target_control
Patch series "make the hugetlb migration strategy consistent", v2. As discussed in previous thread [1], there is an inconsistency when handling hugetlb migration. When handling the migration of freed hugetlb, it prevents fallback to other NUMA nodes in alloc_and_dissolve_hugetlb_folio(). However, when dealing with in-use hugetlb, it allows fallback to other NUMA nodes in alloc_hugetlb_folio_nodemask(), which can break the per-node hugetlb pool and might result in unexpected failures when node bound workloads doesn't get what is asssumed available. This patchset tries to make the hugetlb migration strategy more clear and consistent. Please find details in each patch. [1] https://lore.kernel.org/all/6f26ce22d2fcd523418a085f2c588fe0776d46e7.1706794035.git.baolin.wang@linux.alibaba.com/ This patch (of 2): To support different hugetlb allocation strategies during hugetlb migration based on various migration reasons, record the migration reason in the migration_target_control structure as a preparation. Link: https://lkml.kernel.org/r/cover.1709719720.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/7b95d4981e07211f57139fc5b1f7ce91b920cee4.1709719720.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: David Hildenbrand <david@redhat.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
e0932b6c1f |
mm: page_alloc: consolidate free page accounting
Free page accounting currently happens a bit too high up the call stack, where it has to deal with guard pages, compaction capturing, block stealing and even page isolation. This is subtle and fragile, and makes it difficult to hack on the code. Now that type violations on the freelists have been fixed, push the accounting down to where pages enter and leave the freelist. [hannes@cmpxchg.org: undo unrelated drive-by line wrap] Link: https://lkml.kernel.org/r/20240327185736.GA7597@cmpxchg.org [hannes@cmpxchg.org: remove unused page parameter from account_freepages()] Link: https://lkml.kernel.org/r/20240327185831.GB7597@cmpxchg.org [baolin.wang@linux.alibaba.com: fix free page accounting] Link: https://lkml.kernel.org/r/a2a48baca69f103aa431fd201f8a06e3b95e203d.1712648441.git.baolin.wang@linux.alibaba.com [andriy.shevchenko@linux.intel.com: avoid defining unused function] Link: https://lkml.kernel.org/r/20240423161506.2637177-1-andriy.shevchenko@linux.intel.com Link: https://lkml.kernel.org/r/20240320180429.678181-11-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
fd919a85cd |
mm: page_isolation: prepare for hygienic freelists
Page isolation currently sets MIGRATE_ISOLATE on a block, then drops zone->lock and scans the block for straddling buddies to split up. Because this happens non-atomically wrt the page allocator, it's possible for allocations to get a buddy whose first block is a regular pcp migratetype but whose tail is isolated. This means that in certain cases memory can still be allocated after isolation. It will also trigger the freelist type hygiene warnings in subsequent patches. start_isolate_page_range() isolate_single_pageblock() set_migratetype_isolate(tail) lock zone->lock move_freepages_block(tail) // nop set_pageblock_migratetype(tail) unlock zone->lock __rmqueue_smallest() del_page_from_freelist(head) expand(head, head_mt) WARN(head_mt != tail_mt) start_pfn = ALIGN_DOWN(MAX_ORDER_NR_PAGES) for (pfn = start_pfn, pfn < end_pfn) if (PageBuddy()) split_free_page(head) Introduce a variant of move_freepages_block() provided by the allocator specifically for page isolation; it moves free pages, converts the block, and handles the splitting of straddling buddies while holding zone->lock. The allocator knows that pageblocks and buddies are always naturally aligned, which means that buddies can only straddle blocks if they're actually >pageblock_order. This means the search-and-split part can be simplified compared to what page isolation used to do. Also tighten up the page isolation code around the expectations of which pages can be large, and how they are freed. Based on extensive discussions with and invaluable input from Zi Yan. [hannes@cmpxchg.org: work around older gcc warning] Link: https://lkml.kernel.org/r/20240321142426.GB777580@cmpxchg.org Link: https://lkml.kernel.org/r/20240320180429.678181-10-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
85edc15a4c |
mm: remove folio_prep_large_rmappable()
Now that prep_compound_page() initialises folio->_deferred_list, folio_prep_large_rmappable()'s only purpose is to set the large_rmappable flag, so inline it into the two callers. Take the opportunity to convert the large_rmappable definition from PAGEFLAG to FOLIO_FLAG and remove the existance of PageTestLargeRmappable and friends. Link: https://lkml.kernel.org/r/20240321142448.1645400-4-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
b7b098cf00 |
mm: always initialise folio->_deferred_list
Patch series "Various significant MM patches". These patches all interact in annoying ways which make it tricky to send them out in any way other than a big batch, even though there's not really an overarching theme to connect them. The big effects of this patch series are: - folio_test_hugetlb() becomes reliable, even when called without a page reference - We free up PG_slab, and we could always use more page flags - We no longer need to check PageSlab before calling page_mapcount() This patch (of 9): For compound pages which are at least order-2 (and hence have a deferred_list), initialise it and then we can check at free that the page is not part of a deferred list. We recently found this useful to rule out a source of corruption. [peterx@redhat.com: always initialise folio->_deferred_list] Link: https://lkml.kernel.org/r/20240417211836.2742593-2-peterx@redhat.com Link: https://lkml.kernel.org/r/20240321142448.1645400-1-willy@infradead.org Link: https://lkml.kernel.org/r/20240321142448.1645400-2-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
f8fd525ba3 |
mm/mempolicy: use numa_node_id() instead of cpu_to_node()
Patch series "Allow migrate on protnone reference with MPOL_PREFERRED_MANY policy:, v4. This patchset is to optimize the cross-socket memory access with MPOL_PREFERRED_MANY policy. To test this patch we ran the following test on a 3 node system. Node 0 - 2GB - Tier 1 Node 1 - 11GB - Tier 1 Node 6 - 10GB - Tier 2 Below changes are made to memcached to set the memory policy, It select Node0 and Node1 as preferred nodes. #include <numaif.h> #include <numa.h> unsigned long nodemask; int ret; nodemask = 0x03; ret = set_mempolicy(MPOL_PREFERRED_MANY | MPOL_F_NUMA_BALANCING, &nodemask, 10); /* If MPOL_F_NUMA_BALANCING isn't supported, * fall back to MPOL_PREFERRED_MANY */ if (ret < 0 && errno == EINVAL){ printf("set mem policy normal\n"); ret = set_mempolicy(MPOL_PREFERRED_MANY, &nodemask, 10); } if (ret < 0) { perror("Failed to call set_mempolicy"); exit(-1); } Test Procedure: =============== 1. Make sure memory tiring and demotion are enabled. 2. Start memcached. # ./memcached -b 100000 -m 204800 -u root -c 1000000 -t 7 -d -s "/tmp/memcached.sock" 3. Run memtier_benchmark to store 3200000 keys. #./memtier_benchmark -S "/tmp/memcached.sock" --protocol=memcache_binary --threads=1 --pipeline=1 --ratio=1:0 --key-pattern=S:S --key-minimum=1 --key-maximum=3200000 -n allkeys -c 1 -R -x 1 -d 1024 4. Start a memory eater on node 0 and 1. This will demote all memcached pages to node 6. 5. Make sure all the memcached pages got demoted to lower tier by reading /proc/<memcaced PID>/numa_maps. # cat /proc/2771/numa_maps --- default anon=1009 dirty=1009 active=0 N6=1009 kernelpagesize_kB=64 default anon=1009 dirty=1009 active=0 N6=1009 kernelpagesize_kB=64 --- 6. Kill memory eater. 7. Read the pgpromote_success counter. 8. Start reading the keys by running memtier_benchmark. #./memtier_benchmark -S "/tmp/memcached.sock" --protocol=memcache_binary --pipeline=1 --distinct-client-seed --ratio=0:3 --key-pattern=R:R --key-minimum=1 --key-maximum=3200000 -n allkeys --threads=64 -c 1 -R -x 6 9. Read the pgpromote_success counter. Test Results: ============= Without Patch ------------------ 1. pgpromote_success before test Node 0: pgpromote_success 11 Node 1: pgpromote_success 140974 pgpromote_success after test Node 0: pgpromote_success 11 Node 1: pgpromote_success 140974 2. Memtier-benchmark result. AGGREGATED AVERAGE RESULTS (6 runs) ================================================================== Type Ops/sec Hits/sec Misses/sec Avg. Latency p50 Latency ------------------------------------------------------------------ Sets 0.00 --- --- --- --- Gets 305792.03 305791.93 0.10 0.18949 0.16700 Waits 0.00 --- --- --- --- Totals 305792.03 305791.93 0.10 0.18949 0.16700 ====================================== p99 Latency p99.9 Latency KB/sec ------------------------------------- --- --- 0.00 0.44700 1.71100 11542.69 --- --- --- 0.44700 1.71100 11542.69 With Patch --------------- 1. pgpromote_success before test Node 0: pgpromote_success 5 Node 1: pgpromote_success 89386 pgpromote_success after test Node 0: pgpromote_success 57895 Node 1: pgpromote_success 141463 2. Memtier-benchmark result. AGGREGATED AVERAGE RESULTS (6 runs) ==================================================================== Type Ops/sec Hits/sec Misses/sec Avg. Latency p50 Latency -------------------------------------------------------------------- Sets 0.00 --- --- --- --- Gets 521942.24 521942.07 0.17 0.11459 0.10300 Waits 0.00 --- --- --- --- Totals 521942.24 521942.07 0.17 0.11459 0.10300 ======================================= p99 Latency p99.9 Latency KB/sec --------------------------------------- --- --- 0.00 0.23100 0.31900 19701.68 --- --- --- 0.23100 0.31900 19701.68 Test Result Analysis: ===================== 1. With patch we could observe pages are getting promoted. 2. Memtier-benchmark results shows that, with the patch, performance has increased more than 50%. Ops/sec without fix - 305792.03 Ops/sec with fix - 521942.24 This patch (of 2): Instead of using 'cpu_to_node()', we use 'numa_node_id()', which is quicker. smp_processor_id is guaranteed to be stable in the 'mpol_misplaced()' function because it is called with ptl held. lockdep_assert_held was added to ensure that. No functional change in this patch. [donettom@linux.ibm.com: add "* @vmf: structure describing the fault" comment] Link: https://lkml.kernel.org/r/d8b993ea9dccfac0bc3ed61d3a81f4ac5f376e46.1711002865.git.donettom@linux.ibm.com Link: https://lkml.kernel.org/r/cover.1711373653.git.donettom@linux.ibm.com Link: https://lkml.kernel.org/r/6059f034f436734b472d066db69676fb3a459864.1711373653.git.donettom@linux.ibm.com Link: https://lkml.kernel.org/r/cover.1709909210.git.donettom@linux.ibm.com Link: https://lkml.kernel.org/r/744646531af02cc687cde8ae788fb1779e99d02c.1709909210.git.donettom@linux.ibm.com Signed-off-by: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org> Signed-off-by: Donet Tom <donettom@linux.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
631426ba1d |
mm/madvise: make MADV_POPULATE_(READ|WRITE) handle VM_FAULT_RETRY properly
Darrick reports that in some cases where pread() would fail with -EIO and
mmap()+access would generate a SIGBUS signal, MADV_POPULATE_READ /
MADV_POPULATE_WRITE will keep retrying forever and not fail with -EFAULT.
While the madvise() call can be interrupted by a signal, this is not the
desired behavior. MADV_POPULATE_READ / MADV_POPULATE_WRITE should behave
like page faults in that case: fail and not retry forever.
A reproducer can be found at [1].
The reason is that __get_user_pages(), as called by
faultin_vma_page_range(), will not handle VM_FAULT_RETRY in a proper way:
it will simply return 0 when VM_FAULT_RETRY happened, making
madvise_populate()->faultin_vma_page_range() retry again and again, never
setting FOLL_TRIED->FAULT_FLAG_TRIED for __get_user_pages().
__get_user_pages_locked() does what we want, but duplicating that logic in
faultin_vma_page_range() feels wrong.
So let's use __get_user_pages_locked() instead, that will detect
VM_FAULT_RETRY and set FOLL_TRIED when retrying, making the fault handler
return VM_FAULT_SIGBUS (VM_FAULT_ERROR) at some point, propagating -EFAULT
from faultin_page() to __get_user_pages(), all the way to
madvise_populate().
But, there is an issue: __get_user_pages_locked() will end up re-taking
the MM lock and then __get_user_pages() will do another VMA lookup. In
the meantime, the VMA layout could have changed and we'd fail with
different error codes than we'd want to.
As __get_user_pages() will currently do a new VMA lookup either way, let
it do the VMA handling in a different way, controlled by a new
FOLL_MADV_POPULATE flag, effectively moving these checks from
madvise_populate() + faultin_page_range() in there.
With this change, Darricks reproducer properly fails with -EFAULT, as
documented for MADV_POPULATE_READ / MADV_POPULATE_WRITE.
[1] https://lore.kernel.org/all/20240313171936.GN1927156@frogsfrogsfrogs/
Link: https://lkml.kernel.org/r/20240314161300.382526-1-david@redhat.com
Link: https://lkml.kernel.org/r/20240314161300.382526-2-david@redhat.com
Fixes:
|
||
![]() |
902861e34c |
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series "implement "memmap on memory" feature on s390". - More folio conversions from Matthew Wilcox in the series "Convert memcontrol charge moving to use folios" "mm: convert mm counter to take a folio" - Chengming Zhou has optimized zswap's rbtree locking, providing significant reductions in system time and modest but measurable reductions in overall runtimes. The series is "mm/zswap: optimize the scalability of zswap rb-tree". - Chengming Zhou has also provided the series "mm/zswap: optimize zswap lru list" which provides measurable runtime benefits in some swap-intensive situations. - And Chengming Zhou further optimizes zswap in the series "mm/zswap: optimize for dynamic zswap_pools". Measured improvements are modest. - zswap cleanups and simplifications from Yosry Ahmed in the series "mm: zswap: simplify zswap_swapoff()". - In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has contributed several DAX cleanups as well as adding a sysfs tunable to control the memmap_on_memory setting when the dax device is hotplugged as system memory. - Johannes Weiner has added the large series "mm: zswap: cleanups", which does that. - More DAMON work from SeongJae Park in the series "mm/damon: make DAMON debugfs interface deprecation unignorable" "selftests/damon: add more tests for core functionalities and corner cases" "Docs/mm/damon: misc readability improvements" "mm/damon: let DAMOS feeds and tame/auto-tune itself" - In the series "mm/mempolicy: weighted interleave mempolicy and sysfs extension" Rakie Kim has developed a new mempolicy interleaving policy wherein we allocate memory across nodes in a weighted fashion rather than uniformly. This is beneficial in heterogeneous memory environments appearing with CXL. - Christophe Leroy has contributed some cleanup and consolidation work against the ARM pagetable dumping code in the series "mm: ptdump: Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute". - Luis Chamberlain has added some additional xarray selftesting in the series "test_xarray: advanced API multi-index tests". - Muhammad Usama Anjum has reworked the selftest code to make its human-readable output conform to the TAP ("Test Anything Protocol") format. Amongst other things, this opens up the use of third-party tools to parse and process out selftesting results. - Ryan Roberts has added fork()-time PTE batching of THP ptes in the series "mm/memory: optimize fork() with PTE-mapped THP". Mainly targeted at arm64, this significantly speeds up fork() when the process has a large number of pte-mapped folios. - David Hildenbrand also gets in on the THP pte batching game in his series "mm/memory: optimize unmap/zap with PTE-mapped THP". It implements batching during munmap() and other pte teardown situations. The microbenchmark improvements are nice. - And in the series "Transparent Contiguous PTEs for User Mappings" Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte mappings"). Kernel build times on arm64 improved nicely. Ryan's series "Address some contpte nits" provides some followup work. - In the series "mm/hugetlb: Restore the reservation" Breno Leitao has fixed an obscure hugetlb race which was causing unnecessary page faults. He has also added a reproducer under the selftest code. - In the series "selftests/mm: Output cleanups for the compaction test", Mark Brown did what the title claims. - Kinsey Ho has added the series "mm/mglru: code cleanup and refactoring". - Even more zswap material from Nhat Pham. The series "fix and extend zswap kselftests" does as claimed. - In the series "Introduce cpu_dcache_is_aliasing() to fix DAX regression" Mathieu Desnoyers has cleaned up and fixed rather a mess in our handling of DAX on archiecctures which have virtually aliasing data caches. The arm architecture is the main beneficiary. - Lokesh Gidra's series "per-vma locks in userfaultfd" provides dramatic improvements in worst-case mmap_lock hold times during certain userfaultfd operations. - Some page_owner enhancements and maintenance work from Oscar Salvador in his series "page_owner: print stacks and their outstanding allocations" "page_owner: Fixup and cleanup" - Uladzislau Rezki has contributed some vmalloc scalability improvements in his series "Mitigate a vmap lock contention". It realizes a 12x improvement for a certain microbenchmark. - Some kexec/crash cleanup work from Baoquan He in the series "Split crash out from kexec and clean up related config items". - Some zsmalloc maintenance work from Chengming Zhou in the series "mm/zsmalloc: fix and optimize objects/page migration" "mm/zsmalloc: some cleanup for get/set_zspage_mapping()" - Zi Yan has taught the MM to perform compaction on folios larger than order=0. This a step along the path to implementaton of the merging of large anonymous folios. The series is named "Enable >0 order folio memory compaction". - Christoph Hellwig has done quite a lot of cleanup work in the pagecache writeback code in his series "convert write_cache_pages() to an iterator". - Some modest hugetlb cleanups and speedups in Vishal Moola's series "Handle hugetlb faults under the VMA lock". - Zi Yan has changed the page splitting code so we can split huge pages into sizes other than order-0 to better utilize large folios. The series is named "Split a folio to any lower order folios". - David Hildenbrand has contributed the series "mm: remove total_mapcount()", a cleanup. - Matthew Wilcox has sought to improve the performance of bulk memory freeing in his series "Rearrange batched folio freeing". - Gang Li's series "hugetlb: parallelize hugetlb page init on boot" provides large improvements in bootup times on large machines which are configured to use large numbers of hugetlb pages. - Matthew Wilcox's series "PageFlags cleanups" does that. - Qi Zheng's series "minor fixes and supplement for ptdesc" does that also. S390 is affected. - Cleanups to our pagemap utility functions from Peter Xu in his series "mm/treewide: Replace pXd_large() with pXd_leaf()". - Nico Pache has fixed a few things with our hugepage selftests in his series "selftests/mm: Improve Hugepage Test Handling in MM Selftests". - Also, of course, many singleton patches to many things. Please see the individual changelogs for details. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZfJpPQAKCRDdBJ7gKXxA joxeAP9TrcMEuHnLmBlhIXkWbIR4+ki+pA3v+gNTlJiBhnfVSgD9G55t1aBaRplx TMNhHfyiHYDTx/GAV9NXW84tasJSDgA= =TG55 -----END PGP SIGNATURE----- Merge tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Sumanth Korikkar has taught s390 to allocate hotplug-time page frames from hotplugged memory rather than only from main memory. Series "implement "memmap on memory" feature on s390". - More folio conversions from Matthew Wilcox in the series "Convert memcontrol charge moving to use folios" "mm: convert mm counter to take a folio" - Chengming Zhou has optimized zswap's rbtree locking, providing significant reductions in system time and modest but measurable reductions in overall runtimes. The series is "mm/zswap: optimize the scalability of zswap rb-tree". - Chengming Zhou has also provided the series "mm/zswap: optimize zswap lru list" which provides measurable runtime benefits in some swap-intensive situations. - And Chengming Zhou further optimizes zswap in the series "mm/zswap: optimize for dynamic zswap_pools". Measured improvements are modest. - zswap cleanups and simplifications from Yosry Ahmed in the series "mm: zswap: simplify zswap_swapoff()". - In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has contributed several DAX cleanups as well as adding a sysfs tunable to control the memmap_on_memory setting when the dax device is hotplugged as system memory. - Johannes Weiner has added the large series "mm: zswap: cleanups", which does that. - More DAMON work from SeongJae Park in the series "mm/damon: make DAMON debugfs interface deprecation unignorable" "selftests/damon: add more tests for core functionalities and corner cases" "Docs/mm/damon: misc readability improvements" "mm/damon: let DAMOS feeds and tame/auto-tune itself" - In the series "mm/mempolicy: weighted interleave mempolicy and sysfs extension" Rakie Kim has developed a new mempolicy interleaving policy wherein we allocate memory across nodes in a weighted fashion rather than uniformly. This is beneficial in heterogeneous memory environments appearing with CXL. - Christophe Leroy has contributed some cleanup and consolidation work against the ARM pagetable dumping code in the series "mm: ptdump: Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute". - Luis Chamberlain has added some additional xarray selftesting in the series "test_xarray: advanced API multi-index tests". - Muhammad Usama Anjum has reworked the selftest code to make its human-readable output conform to the TAP ("Test Anything Protocol") format. Amongst other things, this opens up the use of third-party tools to parse and process out selftesting results. - Ryan Roberts has added fork()-time PTE batching of THP ptes in the series "mm/memory: optimize fork() with PTE-mapped THP". Mainly targeted at arm64, this significantly speeds up fork() when the process has a large number of pte-mapped folios. - David Hildenbrand also gets in on the THP pte batching game in his series "mm/memory: optimize unmap/zap with PTE-mapped THP". It implements batching during munmap() and other pte teardown situations. The microbenchmark improvements are nice. - And in the series "Transparent Contiguous PTEs for User Mappings" Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte mappings"). Kernel build times on arm64 improved nicely. Ryan's series "Address some contpte nits" provides some followup work. - In the series "mm/hugetlb: Restore the reservation" Breno Leitao has fixed an obscure hugetlb race which was causing unnecessary page faults. He has also added a reproducer under the selftest code. - In the series "selftests/mm: Output cleanups for the compaction test", Mark Brown did what the title claims. - Kinsey Ho has added the series "mm/mglru: code cleanup and refactoring". - Even more zswap material from Nhat Pham. The series "fix and extend zswap kselftests" does as claimed. - In the series "Introduce cpu_dcache_is_aliasing() to fix DAX regression" Mathieu Desnoyers has cleaned up and fixed rather a mess in our handling of DAX on archiecctures which have virtually aliasing data caches. The arm architecture is the main beneficiary. - Lokesh Gidra's series "per-vma locks in userfaultfd" provides dramatic improvements in worst-case mmap_lock hold times during certain userfaultfd operations. - Some page_owner enhancements and maintenance work from Oscar Salvador in his series "page_owner: print stacks and their outstanding allocations" "page_owner: Fixup and cleanup" - Uladzislau Rezki has contributed some vmalloc scalability improvements in his series "Mitigate a vmap lock contention". It realizes a 12x improvement for a certain microbenchmark. - Some kexec/crash cleanup work from Baoquan He in the series "Split crash out from kexec and clean up related config items". - Some zsmalloc maintenance work from Chengming Zhou in the series "mm/zsmalloc: fix and optimize objects/page migration" "mm/zsmalloc: some cleanup for get/set_zspage_mapping()" - Zi Yan has taught the MM to perform compaction on folios larger than order=0. This a step along the path to implementaton of the merging of large anonymous folios. The series is named "Enable >0 order folio memory compaction". - Christoph Hellwig has done quite a lot of cleanup work in the pagecache writeback code in his series "convert write_cache_pages() to an iterator". - Some modest hugetlb cleanups and speedups in Vishal Moola's series "Handle hugetlb faults under the VMA lock". - Zi Yan has changed the page splitting code so we can split huge pages into sizes other than order-0 to better utilize large folios. The series is named "Split a folio to any lower order folios". - David Hildenbrand has contributed the series "mm: remove total_mapcount()", a cleanup. - Matthew Wilcox has sought to improve the performance of bulk memory freeing in his series "Rearrange batched folio freeing". - Gang Li's series "hugetlb: parallelize hugetlb page init on boot" provides large improvements in bootup times on large machines which are configured to use large numbers of hugetlb pages. - Matthew Wilcox's series "PageFlags cleanups" does that. - Qi Zheng's series "minor fixes and supplement for ptdesc" does that also. S390 is affected. - Cleanups to our pagemap utility functions from Peter Xu in his series "mm/treewide: Replace pXd_large() with pXd_leaf()". - Nico Pache has fixed a few things with our hugepage selftests in his series "selftests/mm: Improve Hugepage Test Handling in MM Selftests". - Also, of course, many singleton patches to many things. Please see the individual changelogs for details. * tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits) mm/zswap: remove the memcpy if acomp is not sleepable crypto: introduce: acomp_is_async to expose if comp drivers might sleep memtest: use {READ,WRITE}_ONCE in memory scanning mm: prohibit the last subpage from reusing the entire large folio mm: recover pud_leaf() definitions in nopmd case selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements selftests/mm: skip uffd hugetlb tests with insufficient hugepages selftests/mm: dont fail testsuite due to a lack of hugepages mm/huge_memory: skip invalid debugfs new_order input for folio split mm/huge_memory: check new folio order when split a folio mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure mm: add an explicit smp_wmb() to UFFDIO_CONTINUE mm: fix list corruption in put_pages_list mm: remove folio from deferred split list before uncharging it filemap: avoid unnecessary major faults in filemap_fault() mm,page_owner: drop unnecessary check mm,page_owner: check for null stack_record before bumping its refcount mm: swap: fix race between free_swap_and_cache() and swapoff() mm/treewide: align up pXd_leaf() retval across archs mm/treewide: drop pXd_large() ... |
||
![]() |
ac96cc4d1c |
mm: make folio_pte_batch available outside of mm/memory.c
madvise, mprotect and some others might need folio_pte_batch to check if a range of PTEs are completely mapped to a large folio with contiguous physical addresses. Let's make it available in mm/internal.h. While at it, add proper kernel doc and sanity-check more input parameters using two additional VM_WARN_ON_FOLIO(). [21cnbao@gmail.com: build fix] Link: https://lkml.kernel.org/r/CAGsJ_4wWzG-37D82vqP_zt+Fcbz+URVe5oXLBc4M5wbN8A_gpQ@mail.gmail.com [david@redhat.com: improve the doc for the exported func] Link: https://lkml.kernel.org/r/20240227104201.337988-1-21cnbao@gmail.com Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Suggested-by: David Hildenbrand <david@redhat.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
c8b3600312 |
mm: add alloc_contig_migrate_range allocation statistics
alloc_contig_migrate_range has every information to be able to understand big contiguous allocation latency. For example, how many pages are migrated, how many times they were needed to unmap from page tables. This patch adds the trace event to collect the allocation statistics. In the field, it was quite useful to understand CMA allocation latency. [akpm@linux-foundation.org: a/trace_mm_alloc_config_migrate_range_info_enabled/trace_mm_alloc_contig_migrate_range_info_enabled] Link: https://lkml.kernel.org/r/20240228051127.2859472-1-richardycc@google.com Signed-off-by: Richard Chang <richardycc@google.com> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org. Cc: Martin Liu <liumartin@google.com> Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
8b7b0a5eee |
mm: remove free_unref_page_list()
All callers now use free_unref_folios() so we can delete this function. Link: https://lkml.kernel.org/r/20240227174254.710559-15-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
90491d87dd |
mm: add free_unref_folios()
Iterate over a folio_batch rather than a linked list. This is easier for the CPU to prefetch and has a batch count naturally built in so we don't need to track it. Again, this lowers the maximum lock hold time from 32 folios to 15, but I do not expect this to have a significant effect. Link: https://lkml.kernel.org/r/20240227174254.710559-4-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
8897277acf |
mm: support order-1 folios in the page cache
Folios of order 1 have no space to store the deferred list. This is not a problem for the page cache as file-backed folios are never placed on the deferred list. All we need to do is prevent the core MM from touching the deferred list for order 1 folios and remove the code which prevented us from allocating order 1 folios. Link: https://lore.kernel.org/linux-mm/90344ea7-4eec-47ee-5996-0c22f42d6a6a@google.com/ Link: https://lkml.kernel.org/r/20240226205534.1603748-3-zi.yan@sent.com Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Zi Yan <ziy@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Michal Koutny <mkoutny@suse.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
2864f3d0f5 |
mm: madvise: pageout: ignore references rather than clearing young
While doing MADV_PAGEOUT, the current code will clear PTE young so that vmscan won't read young flags to allow the reclamation of madvised folios to go ahead. It seems we can do it by directly ignoring references, thus we can remove tlb flush in madvise and rmap overhead in vmscan. Regarding the side effect, in the original code, if a parallel thread runs side by side to access the madvised memory with the thread doing madvise, folios will get a chance to be re-activated by vmscan (though the time gap is actually quite small since checking PTEs is done immediately after clearing PTEs young). But with this patch, they will still be reclaimed. But this behaviour doing PAGEOUT and doing access at the same time is quite silly like DoS. So probably, we don't need to care. Or ignoring the new access during the quite small time gap is even better. For DAMON's DAMOS_PAGEOUT based on physical address region, we still keep its behaviour as is since a physical address might be mapped by multiple processes. MADV_PAGEOUT based on virtual address is actually much more aggressive on reclamation. To untouch paddr's DAMOS_PAGEOUT, we simply pass ignore_references as false in reclaim_pages(). A microbench as below has shown 6% decrement on the latency of MADV_PAGEOUT, #define PGSIZE 4096 main() { int i; #define SIZE 512*1024*1024 volatile long *p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); for (i = 0; i < SIZE/sizeof(long); i += PGSIZE / sizeof(long)) p[i] = 0x11; madvise(p, SIZE, MADV_PAGEOUT); } w/o patch w/ patch root@10:~# time ./a.out root@10:~# time ./a.out real 0m49.634s real 0m46.334s user 0m0.637s user 0m0.648s sys 0m47.434s sys 0m44.265s Link: https://lkml.kernel.org/r/20240226005739.24350-1-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: SeongJae Park <sj@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
997f0ecb11 |
mm/memory: change vmf_anon_prepare() to be non-static
Patch series "Handle hugetlb faults under the VMA lock", v2. It is generally safe to handle hugetlb faults under the VMA lock. The only time this is unsafe is when no anon_vma has been allocated to this vma yet, so we can use vmf_anon_prepare() instead of anon_vma_prepare() to bailout if necessary. This should only happen for the first hugetlb page in the vma. Additionally, this patchset begins to use struct vm_fault within hugetlb_fault(). This works towards cleaning up hugetlb code, and should significantly reduce the number of arguments passed to functions. The last patch in this series may cause ltp hugemmap10 to "fail". This is because vmf_anon_prepare() may bailout with no anon_vma under the VMA lock after allocating a folio for the hugepage. In free_huge_folio(), this folio is completely freed on bailout iff there is a surplus of hugetlb pages. This will remove a folio off the freelist and decrement the number of hugepages while ltp expects these counters to remain unchanged on failure. The rest of the ltp testcases pass. This patch (of 2): In order to handle hugetlb faults under the VMA lock, hugetlb can use vmf_anon_prepare() to ensure we can safely prepare an anon_vma. Change it to be a non-static function so it can be used within hugetlb as well. Link: https://lkml.kernel.org/r/20240221234732.187629-6-vishal.moola@gmail.com Link: https://lkml.kernel.org/r/20240221234732.187629-2-vishal.moola@gmail.com Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
733aea0b3a |
mm/compaction: add support for >0 order folio memory compaction.
Before last commit, memory compaction only migrates order-0 folios and skips >0 order folios. Last commit splits all >0 order folios during compaction. This commit migrates >0 order folios during compaction by keeping isolated free pages at their original size without splitting them into order-0 pages and using them directly during migration process. What is different from the prior implementation: 1. All isolated free pages are kept in a NR_PAGE_ORDERS array of page lists, where each page list stores free pages in the same order. 2. All free pages are not post_alloc_hook() processed nor buddy pages, although their orders are stored in first page's private like buddy pages. 3. During migration, in new page allocation time (i.e., in compaction_alloc()), free pages are then processed by post_alloc_hook(). When migration fails and a new page is returned (i.e., in compaction_free()), free pages are restored by reversing the post_alloc_hook() operations using newly added free_pages_prepare_fpi_none(). Step 3 is done for a latter optimization that splitting and/or merging free pages during compaction becomes easier. Note: without splitting free pages, compaction can end prematurely due to migration will return -ENOMEM even if there is free pages. This happens when no order-0 free page exist and compaction_alloc() return NULL. Link: https://lkml.kernel.org/r/20240220183220.1451315-4-zi.yan@sent.com Signed-off-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Tested-by: Yu Zhao <yuzhao@google.com> Cc: Adam Manzanares <a.manzanares@samsung.com> Cc: David Hildenbrand <david@redhat.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
412c6ef986 |
mm/mmap: introduce vma_set_range()
There is a lot of code needs to set the range of vma in mmap.c, introduce vma_set_range() to simplify the code. Link: https://lkml.kernel.org/r/20240124035719.3685193-1-yajun.deng@linux.dev Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
b64e74e95a |
mm: move mapping_set_update out of <linux/swap.h>
mapping_set_update is only used inside mm/. Move mapping_set_update to mm/internal.h and turn it into an inline function instead of a macro. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: "Matthew Wilcox (Oracle)" <willy@infradead.org> Signed-off-by: Chandan Babu R <chandanbabu@kernel.org> |
||
![]() |
5e0a760b44 |
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
commit
|
||
![]() |
4a8ffab02d |
mm: remove one last reference to page_add_*_rmap()
Let's fixup one remaining comment. Note that the only trace remaining of the old rmap interface is in an example in Documentation/trace/ftrace.rst, that we'll just leave alone. Link: https://lkml.kernel.org/r/20231220224504.646757-41-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Peter Xu <peterx@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
e78a13fd16 |
mm/rmap: rename COMPOUND_MAPPED to ENTIRELY_MAPPED
We removed all "bool compound" and RMAP_COMPOUND parameters. Let's remove the remaining "compound" terminology by making COMPOUND_MAPPED match the "folio->_entire_mapcount" terminology, renaming it to ENTIRELY_MAPPED. ENTIRELY_MAPPED is only used when the whole folio is mapped using a single page table entry (e.g., a single PMD mapping a PMD-sized THP). For now, we don't support mapping any THP bigger than that, so ENTIRELY_MAPPED only applies to PMD-mapped PMD-sized THP only. Link: https://lkml.kernel.org/r/20231220224504.646757-40-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Peter Xu <peterx@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
e3b4b1374f |
mm: convert page_try_share_anon_rmap() to folio_try_share_anon_rmap_[pte|pmd]()
Let's convert it like we converted all the other rmap functions. Don't introduce folio_try_share_anon_rmap_ptes() for now, as we don't have a user that wants rmap batching in sight. Pretty easy to add later. All users are easy to convert -- only ksm.c doesn't use folios yet but that is left for future work -- so let's just do it in a single shot. While at it, turn the BUG_ON into a WARN_ON_ONCE. Note that page_try_share_anon_rmap() so far didn't care about pte/pmd mappings (no compound parameter). We're changing that so we can perform better sanity checks and make the code actually more readable/consistent. For example, __folio_rmap_sanity_checks() will make sure that a PMD range actually falls completely into the folio. Link: https://lkml.kernel.org/r/20231220224504.646757-39-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Peter Xu <peterx@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
4d8f7418e8 |
mm/rmap: remove page_remove_rmap()
All callers are gone, let's remove it and some leftover traces. Link: https://lkml.kernel.org/r/20231220224504.646757-33-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Peter Xu <peterx@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
dd05f5ec1e |
mm: use vma_pages() for vma objects
vma_pages() is more readable and also better at avoiding error codes, so use vma_pages() instead of direct operations on vma Link: https://lkml.kernel.org/r/tencent_151850CF327EB055BBC83298A929BD06CD0A@qq.com Signed-off-by: Chen Haonan <chen.haonan2@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
067311d33e |
maple_tree: separate ma_state node from status
The maple tree node is overloaded to keep status as well as the active node. This, unfortunately, results in a re-walk on underflow or overflow. Since the maple state has room, the status can be placed in its own enum in the structure. Once an underflow/overflow is detected, certain modes can restore the status to active and others may need to re-walk just that one node to see the entry. The status being an enum has the benefit of detecting unhandled status in switch statements. [Liam.Howlett@oracle.com: fix comments about MAS_*] Link: https://lkml.kernel.org/r/20231106154124.614247-1-Liam.Howlett@oracle.com [Liam.Howlett@oracle.com: update forking to separate maple state and node] Link: https://lkml.kernel.org/r/20231106154551.615042-1-Liam.Howlett@oracle.com [Liam.Howlett@oracle.com: fix mas_prev() state separation code] Link: https://lkml.kernel.org/r/20231207193319.4025462-1-Liam.Howlett@oracle.com Link: https://lkml.kernel.org/r/20231101171629.3612299-9-Liam.Howlett@oracle.com Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Peng Zhang <zhangpeng.00@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
bf857ddd21 |
maple_tree: move debug check to __mas_set_range()
__mas_set_range() was created to shortcut resetting the maple state and a debug check was added to the caller (the vma iterator) to ensure the internal maple state remains safe to use. Move the debug check from the vma iterator into the maple tree itself so other users do not incorrectly use the advanced maple state modification. Fallout from this change include a large amount of debug setup needed to be moved to earlier in the header, and the maple_tree.h radix-tree test code needed to move the inclusion of the header to after the atomic define. None of those changes have functional changes. Link: https://lkml.kernel.org/r/20231101171629.3612299-4-Liam.Howlett@oracle.com Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Peng Zhang <zhangpeng.00@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
2033c98cce |
mm: remove invalidate_inode_page()
All callers are now converted to call mapping_evict_folio(). Link: https://lkml.kernel.org/r/20231108182809.602073-7-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
1e12cbb9f6 |
mm: make mapping_evict_folio() the preferred way to evict clean folios
Patch series "Fix fault handler's handling of poisoned tail pages". Since introducing the ability to have large folios in the page cache, it's been possible to have a hwpoisoned tail page returned from the fault handler. We handle this situation poorly; failing to remove the affected page from use. This isn't a minimal patch to fix it, it's a full conversion of all the code surrounding it. This patch (of 6): invalidate_inode_page() does very little beyond calling mapping_evict_folio(). Move the check for mapping being NULL into mapping_evict_folio() and make it available to the rest of the MM for use in the next few patches. Link: https://lkml.kernel.org/r/20231108182809.602073-1-willy@infradead.org Link: https://lkml.kernel.org/r/20231108182809.602073-2-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
d240629148 |
fork: use __mt_dup() to duplicate maple tree in dup_mmap()
In dup_mmap(), using __mt_dup() to duplicate the old maple tree and then directly replacing the entries of VMAs in the new maple tree can result in better performance. __mt_dup() uses DFS pre-order to duplicate the maple tree, so it is efficient. The average time complexity of __mt_dup() is O(n), where n is the number of VMAs. The proof of the time complexity is provided in the commit log that introduces __mt_dup(). After duplicating the maple tree, each element is traversed and replaced (ignoring the cases of deletion, which are rare). Since it is only a replacement operation for each element, this process is also O(n). Analyzing the exact time complexity of the previous algorithm is challenging because each insertion can involve appending to a node, pushing data to adjacent nodes, or even splitting nodes. The frequency of each action is difficult to calculate. The worst-case scenario for a single insertion is when the tree undergoes splitting at every level. If we consider each insertion as the worst-case scenario, we can determine that the upper bound of the time complexity is O(n*log(n)), although this is a loose upper bound. However, based on the test data, it appears that the actual time complexity is likely to be O(n). As the entire maple tree is duplicated using __mt_dup(), if dup_mmap() fails, there will be a portion of VMAs that have not been duplicated in the maple tree. To handle this, we mark the failure point with XA_ZERO_ENTRY. In exit_mmap(), if this marker is encountered, stop releasing VMAs that have not been duplicated after this point. There is a "spawn" in byte-unixbench[1], which can be used to test the performance of fork(). I modified it slightly to make it work with different number of VMAs. Below are the test results. The first row shows the number of VMAs. The second and third rows show the number of fork() calls per ten seconds, corresponding to next-20231006 and the this patchset, respectively. The test results were obtained with CPU binding to avoid scheduler load balancing that could cause unstable results. There are still some fluctuations in the test results, but at least they are better than the original performance. 21 121 221 421 821 1621 3221 6421 12821 25621 51221 112100 76261 54227 34035 20195 11112 6017 3161 1606 802 393 114558 83067 65008 45824 28751 16072 8922 4747 2436 1233 599 2.19% 8.92% 19.88% 34.64% 42.37% 44.64% 48.28% 50.17% 51.68% 53.74% 52.42% [1] https://github.com/kdlucas/byte-unixbench/tree/master Link: https://lkml.kernel.org/r/20231027033845.90608-11-zhangpeng.00@bytedance.com Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com> Suggested-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mateusz Guzik <mjguzik@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Mike Christie <michael.christie@oracle.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
23e4883248 |
mm: add page_rmappable_folio() wrapper
folio_prep_large_rmappable() is being used repeatedly along with a conversion from page to folio, a check non-NULL, a check order > 1: wrap it all up into struct folio *page_rmappable_folio(struct page *). Link: https://lkml.kernel.org/r/8d92c6cf-eebe-748-e29c-c8ab224c741@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tejun heo <tj@kernel.org> Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
be16dd764a |
mm: fix multiple typos in multiple files
Link: https://lkml.kernel.org/r/20231023124405.36981-1-m.muzzammilashraf@gmail.com Signed-off-by: Muhammad Muzammil <m.muzzammilashraf@gmail.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muhammad Muzammil <m.muzzammilashraf@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
93bf5d4aa2 |
mm: abstract VMA merge and extend into vma_merge_extend() helper
mremap uses vma_merge() in the case where a VMA needs to be extended. This can be significantly simplified and abstracted. This makes it far easier to understand what the actual function is doing, avoids future mistakes in use of the confusing vma_merge() function and importantly allows us to make future changes to how vma_merge() is implemented by knowing explicitly which merge cases each invocation uses. Note that in the mremap() extend case, we perform this merge only when old_len == vma->vm_end - addr. The extension_start, i.e. the start of the extended portion of the VMA is equal to addr + old_len, i.e. vma->vm_end. With this refactoring, vma_merge() is no longer required anywhere except mm/mmap.c, so mark it static. Link: https://lkml.kernel.org/r/f16cbdc2e72d37a1a097c39dc7d1fee8919a1c93.1697043508.git.lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
adb20b0c78 |
mm: make vma_merge() and split_vma() internal
Now the common pattern of - attempting a merge via vma_merge() and should this fail splitting VMAs via split_vma() - has been abstracted, the former can be placed into mm/internal.h and the latter made static. In addition, the split_vma() nommu variant also need not be exported. Link: https://lkml.kernel.org/r/405f2be10e20c4e9fbcc9fe6b2dfea105f6642e0.1697043508.git.lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
f04eba134e |
mm: add printf attribute to shrinker_debugfs_name_alloc
This fixes a compiler warning when compiling an allyesconfig with W=1:
mm/internal.h:1235:9: error: function might be a candidate for `gnu_printf'
format attribute [-Werror=suggest-attribute=format]
[akpm@linux-foundation.org: fix shrinker_alloc() as welll per Qi Zheng]
Link: https://lkml.kernel.org/r/822387b7-4895-4e64-5806-0f56b5d6c447@bytedance.com
Link: https://lkml.kernel.org/r/ZSBue-3kM6gI6jCr@mainframe
Fixes:
|
||
![]() |
2580d55458 |
mm: use folio_xor_flags_has_waiters() in folio_end_writeback()
Match how folio_unlock() works by combining the test for PG_waiters with the clearing of PG_writeback. This should have a small performance win, and removes the last user of folio_wake(). Link: https://lkml.kernel.org/r/20231004165317.1061855-18-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
7d0795d098 |
mm: make __end_folio_writeback() return void
Rather than check the result of test-and-clear, just check that we have the writeback bit set at the start. This wouldn't catch every case, but it's good enough (and enables the next patch). Link: https://lkml.kernel.org/r/20231004165317.1061855-17-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
0f20bba168 |
mm/gup: explicitly define and check internal GUP flags, disallow FOLL_TOUCH
Rather than open-coding a list of internal GUP flags in is_valid_gup_args(), define which ones are internal. In addition, explicitly check to see if the user passed in FOLL_TOUCH somehow, as this appears to have been accidentally excluded. Link: https://lkml.kernel.org/r/971e013dfe20915612ea8b704e801d7aef9a66b6.1696288092.git.lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
cda6d93672 |
mm: memory: make numa_migrate_prep() to take a folio
In preparation for large folio numa balancing, make numa_migrate_prep() to take a folio, no functional change intended. Link: https://lkml.kernel.org/r/20230921074417.24004-5-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
1acbc3f936 |
mm: handle large folio when large folio in VM_LOCKED VMA range
If large folio is in the range of VM_LOCKED VMA, it should be mlocked to avoid being picked by page reclaim. Which may split the large folio and then mlock each pages again. Mlock this kind of large folio to prevent them being picked by page reclaim. For the large folio which cross the boundary of VM_LOCKED VMA or not fully mapped to VM_LOCKED VMA, we'd better not to mlock it. So if the system is under memory pressure, this kind of large folio will be split and the pages ouf of VM_LOCKED VMA can be reclaimed. Ideally, for large folio, we should mlock it when the large folio is fully mapped to VMA and munlock it if any page are unmampped from VMA. But it's not easy to detect whether the large folio is fully mapped to VMA in some cases (like add/remove rmap). So we update mlock_vma_folio() and munlock_vma_folio() to mlock/munlock the folio according to vma->vm_flags. Let caller to decide whether they should call these two functions. For add rmap, only mlock normal 4K folio and postpone large folio handling to page reclaim phase. It is possible to reuse page table iterator to detect whether folio is fully mapped or not during page reclaim phase. For remove rmap, invoke munlock_vma_folio() to munlock folio unconditionly because rmap makes folio not fully mapped to VMA. Link: https://lkml.kernel.org/r/20230918073318.1181104-3-fengwei.yin@intel.com Signed-off-by: Yin Fengwei <fengwei.yin@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
28e566572a |
mm: add functions folio_in_range() and folio_within_vma()
Patch series "support large folio for mlock", v3. Yu mentioned at [1] about the mlock() can't be applied to large folio. I leant the related code and here is my understanding: - For RLIMIT_MEMLOCK related, there is no problem. Because the RLIMIT_MEMLOCK statistics is not related underneath page. That means underneath page mlock or munlock doesn't impact the RLIMIT_MEMLOCK statistics collection which is always correct. - For keeping the page in RAM, there is no problem either. At least, during try_to_unmap_one(), once detect the VMA has VM_LOCKED bit set in vm_flags, the folio will be kept whatever the folio is mlocked or not. So the function of mlock for large folio works. But it's not optimized because the page reclaim needs scan these large folio and may split them. This series identified the large folio for mlock to four types: - The large folio is in VM_LOCKED range and fully mapped to the range - The large folio is in the VM_LOCKED range but not fully mapped to the range - The large folio cross VM_LOCKED VMA boundary - The large folio cross last level page table boundary For the first type, we mlock large folio so page reclaim will skip it. For the second/third type, we don't mlock large folio. As the pages not mapped to VM_LOACKED range are mapped to none VM_LOCKED range, if system is in memory pressure situation, the large folio can be picked by page reclaim and split. Then the pages not mapped to VM_LOCKED range can be reclaimed. For the fourth type, we don't mlock large folio because locking one page table lock can't prevent the part in another last level page table being unmapped. Thanks to Ryan for pointing this out. To check whether the folio is fully mapped to the range, PTEs needs be checked to see whether the page of folio is associated. Which needs take page table lock and is heavy operation. So far, the only place needs this check is madvise and page reclaim. These functions already have their own PTE iterator. patch1 introduce API to check whether large folio is in VMA range. patch2 make page reclaim/mlock_vma_folio/munlock_vma_folio support large folio mlock/munlock. patch3 make mlock/munlock syscall support large folio. Yu also mentioned a race which can make folio unevictable after munlock during RFC v2 discussion [3]: We decided that race issue didn't block this series based on: - That race issue was not introduced by this series - We had a looks-ok fix for that race issue. Need to wait for mlock_count fixing patch as Yosry Ahmed suggested [4] [1] https://lore.kernel.org/linux-mm/CAOUHufbtNPkdktjt_5qM45GegVO-rCFOMkSh0HQminQ12zsV8Q@mail.gmail.com/ [2] https://lore.kernel.org/linux-mm/20230809061105.3369958-1-fengwei.yin@intel.com/ [3] https://lore.kernel.org/linux-mm/CAOUHufZ6=9P_=CAOQyw0xw-3q707q-1FVV09dBNDC-hpcpj2Pg@mail.gmail.com/ This patch (of 3): folio_in_range() will be used to check whether the folio is mapped to specific VMA and whether the mapping address of folio is in the range. Also a helper function folio_within_vma() to check whether folio is in the range of vma based on folio_in_range(). Link: https://lkml.kernel.org/r/20230918073318.1181104-1-fengwei.yin@intel.com Link: https://lkml.kernel.org/r/20230918073318.1181104-2-fengwei.yin@intel.com Signed-off-by: Yin Fengwei <fengwei.yin@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
fde1c4ecf9 |
mm: hugetlb: skip initialization of gigantic tail struct pages if freed by HVO
The new boot flow when it comes to initialization of gigantic pages is as follows: - At boot time, for a gigantic page during __alloc_bootmem_hugepage, the region after the first struct page is marked as noinit. - This results in only the first struct page to be initialized in reserve_bootmem_region. As the tail struct pages are not initialized at this point, there can be a significant saving in boot time if HVO succeeds later on. - Later on in the boot, the head page is prepped and the first HUGETLB_VMEMMAP_RESERVE_SIZE / sizeof(struct page) - 1 tail struct pages are initialized. - HVO is attempted. If it is not successful, then the rest of the tail struct pages are initialized. If it is successful, no more tail struct pages need to be initialized saving significant boot time. The WARN_ON for increased ref count in gather_bootmem_prealloc was changed to a VM_BUG_ON. This is OK as there should be no speculative references this early in boot process. The VM_BUG_ON's are there just in case such code is introduced. [akpm@linux-foundation.org: make it nicer for 80 cols] Link: https://lkml.kernel.org/r/20230913105401.519709-5-usama.arif@bytedance.com Signed-off-by: Usama Arif <usama.arif@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
c42d50aefd |
mm: shrinker: add infrastructure for dynamically allocating shrinker
Patch series "use refcount+RCU method to implement lockless slab shrink", v6. 1. Background ============= We used to implement the lockless slab shrink with SRCU [1], but then kernel test robot reported -88.8% regression in stress-ng.ramfs.ops_per_sec test case [2], so we reverted it [3]. This patch series aims to re-implement the lockless slab shrink using the refcount+RCU method proposed by Dave Chinner [4]. [1]. https://lore.kernel.org/lkml/20230313112819.38938-1-zhengqi.arch@bytedance.com/ [2]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/ [3]. https://lore.kernel.org/all/20230609081518.3039120-1-qi.zheng@linux.dev/ [4]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/ 2. Implementation ================= Currently, the shrinker instances can be divided into the following three types: a) global shrinker instance statically defined in the kernel, such as workingset_shadow_shrinker. b) global shrinker instance statically defined in the kernel modules, such as mmu_shrinker in x86. c) shrinker instance embedded in other structures. For case a, the memory of shrinker instance is never freed. For case b, the memory of shrinker instance will be freed after synchronize_rcu() when the module is unloaded. For case c, the memory of shrinker instance will be freed along with the structure it is embedded in. In preparation for implementing lockless slab shrink, we need to dynamically allocate those shrinker instances in case c, then the memory can be dynamically freed alone by calling kfree_rcu(). This patchset adds the following new APIs for dynamically allocating shrinker, and add a private_data field to struct shrinker to record and get the original embedded structure. 1. shrinker_alloc() 2. shrinker_register() 3. shrinker_free() In order to simplify shrinker-related APIs and make shrinker more independent of other kernel mechanisms, this patchset uses the above APIs to convert all shrinkers (including case a and b) to dynamically allocated, and then remove all existing APIs. This will also have another advantage mentioned by Dave Chinner: ``` The other advantage of this is that it will break all the existing out of tree code and third party modules using the old API and will no longer work with a kernel using lockless slab shrinkers. They need to break (both at the source and binary levels) to stop bad things from happening due to using uncoverted shrinkers in the new setup. ``` Then we free the shrinker by calling call_rcu(), and use rcu_read_{lock,unlock}() to ensure that the shrinker instance is valid. And the shrinker::refcount mechanism ensures that the shrinker instance will not be run again after unregistration. So the structure that records the pointer of shrinker instance can be safely freed without waiting for the RCU read-side critical section. In this way, while we implement the lockless slab shrink, we don't need to be blocked in unregister_shrinker() to wait RCU read-side critical section. PATCH 1: introduce new APIs PATCH 2~38: convert all shrinnkers to use new APIs PATCH 39: remove old APIs PATCH 40~41: some cleanups and preparations PATCH 42-43: implement the lockless slab shrink PATCH 44~45: convert shrinker_rwsem to mutex 3. Testing ========== 3.1 slab shrink stress test --------------------------- We can reproduce the down_read_trylock() hotspot through the following script: ``` DIR="/root/shrinker/memcg/mnt" do_create() { mkdir -p /sys/fs/cgroup/memory/test echo 4G > /sys/fs/cgroup/memory/test/memory.limit_in_bytes for i in `seq 0 $1`; do mkdir -p /sys/fs/cgroup/memory/test/$i; echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs; mkdir -p $DIR/$i; done } do_mount() { for i in `seq $1 $2`; do mount -t tmpfs $i $DIR/$i; done } do_touch() { for i in `seq $1 $2`; do echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs; dd if=/dev/zero of=$DIR/$i/file$i bs=1M count=1 & done } case "$1" in touch) do_touch $2 $3 ;; test) do_create 4000 do_mount 0 4000 do_touch 0 3000 ;; *) exit 1 ;; esac ``` Save the above script, then run test and touch commands. Then we can use the following perf command to view hotspots: perf top -U -F 999 1) Before applying this patchset: 33.15% [kernel] [k] down_read_trylock 25.38% [kernel] [k] shrink_slab 21.75% [kernel] [k] up_read 4.45% [kernel] [k] _find_next_bit 2.27% [kernel] [k] do_shrink_slab 1.80% [kernel] [k] intel_idle_irq 1.79% [kernel] [k] shrink_lruvec 0.67% [kernel] [k] xas_descend 0.41% [kernel] [k] mem_cgroup_iter 0.40% [kernel] [k] shrink_node 0.38% [kernel] [k] list_lru_count_one 2) After applying this patchset: 64.56% [kernel] [k] shrink_slab 12.18% [kernel] [k] do_shrink_slab 3.30% [kernel] [k] __rcu_read_unlock 2.61% [kernel] [k] shrink_lruvec 2.49% [kernel] [k] __rcu_read_lock 1.93% [kernel] [k] intel_idle_irq 0.89% [kernel] [k] shrink_node 0.81% [kernel] [k] mem_cgroup_iter 0.77% [kernel] [k] mem_cgroup_calculate_protection 0.66% [kernel] [k] list_lru_count_one We can see that the first perf hotspot becomes shrink_slab, which is what we expect. 3.2 registration and unregistration stress test ----------------------------------------------- Run the command below to test: stress-ng --timeout 60 --times --verify --metrics-brief --ramfs 9 & 1) Before applying this patchset: setting to a 60 second run per stressor dispatching hogs: 9 ramfs stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s (secs) (secs) (secs) (real time) (usr+sys time) ramfs 473062 60.00 8.00 279.13 7884.12 1647.59 for a 60.01s run time: 1440.34s available CPU time 7.99s user time ( 0.55%) 279.13s system time ( 19.38%) 287.12s total time ( 19.93%) load average: 7.12 2.99 1.15 successful run completed in 60.01s (1 min, 0.01 secs) 2) After applying this patchset: setting to a 60 second run per stressor dispatching hogs: 9 ramfs stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s (secs) (secs) (secs) (real time) (usr+sys time) ramfs 477165 60.00 8.13 281.34 7952.55 1648.40 for a 60.01s run time: 1440.33s available CPU time 8.12s user time ( 0.56%) 281.34s system time ( 19.53%) 289.46s total time ( 20.10%) load average: 6.98 3.03 1.19 successful run completed in 60.01s (1 min, 0.01 secs) We can see that the ops/s has hardly changed. This patch (of 45): Currently, the shrinker instances can be divided into the following three types: a) global shrinker instance statically defined in the kernel, such as workingset_shadow_shrinker. b) global shrinker instance statically defined in the kernel modules, such as mmu_shrinker in x86. c) shrinker instance embedded in other structures. For case a, the memory of shrinker instance is never freed. For case b, the memory of shrinker instance will be freed after synchronize_rcu() when the module is unloaded. For case c, the memory of shrinker instance will be freed along with the structure it is embedded in. In preparation for implementing lockless slab shrink, we need to dynamically allocate those shrinker instances in case c, then the memory can be dynamically freed alone by calling kfree_rcu(). So this commit adds the following new APIs for dynamically allocating shrinker, and add a private_data field to struct shrinker to record and get the original embedded structure. 1. shrinker_alloc() Used to allocate shrinker instance itself and related memory, it will return a pointer to the shrinker instance on success and NULL on failure. 2. shrinker_register() Used to register the shrinker instance, which is same as the current register_shrinker_prepared(). 3. shrinker_free() Used to unregister (if needed) and free the shrinker instance. In order to simplify shrinker-related APIs and make shrinker more independent of other kernel mechanisms, subsequent submissions will use the above API to convert all shrinkers (including case a and b) to dynamically allocated, and then remove all existing APIs. This will also have another advantage mentioned by Dave Chinner: ``` The other advantage of this is that it will break all the existing out of tree code and third party modules using the old API and will no longer work with a kernel using lockless slab shrinkers. They need to break (both at the source and binary levels) to stop bad things from happening due to using unconverted shrinkers in the new setup. ``` [zhengqi.arch@bytedance.com: mm: shrinker: some cleanup] Link: https://lkml.kernel.org/r/20230919024607.65463-1-zhengqi.arch@bytedance.com Link: https://lkml.kernel.org/r/20230911094444.68966-1-zhengqi.arch@bytedance.com Link: https://lkml.kernel.org/r/20230911094444.68966-2-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Chuck Lever <cel@kernel.org> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Steven Price <steven.price@arm.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Mason <clm@fb.com> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Sterba <dsterba@suse.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Sean Paul <sean@poorly.run> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
96f7b2b9bb |
mm: vmscan: move shrinker-related code into a separate file
The mm/vmscan.c file is too large, so separate the shrinker-related code from it into a separate file. No functional changes. Link: https://lkml.kernel.org/r/20230911092517.64141-3-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christian König <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Steven Price <steven.price@arm.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Mason <clm@fb.com> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Sterba <dsterba@suse.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Sean Paul <sean@poorly.run> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
3ee0aa9f06 |
mm: move some shrinker-related function declarations to mm/internal.h
Patch series "cleanups for lockless slab shrink", v4. This series is some cleanups for lockless slab shrink. This patch (of 4): The following functions are only used inside the mm subsystem, so it's better to move their declarations to the mm/internal.h file. 1. shrinker_debugfs_add() 2. shrinker_debugfs_detach() 3. shrinker_debugfs_remove() Link: https://lkml.kernel.org/r/20230911092517.64141-1-zhengqi.arch@bytedance.com Link: https://lkml.kernel.org/r/20230911092517.64141-2-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christian König <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Steven Price <steven.price@arm.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Mason <clm@fb.com> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Sterba <dsterba@suse.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Sean Paul <sean@poorly.run> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
df57721f9a |
Add x86 shadow stack support
Convert IBT selftest to asm to fix objtool warning -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmTv1QQACgkQaDWVMHDJ krAUwhAAn6TOwHJK8BSkHeiQhON1nrlP3c5cv0AyZ2NP8RYDrZrSZvhpYBJ6wgKC Cx5CGq5nn9twYsYS3KsktLKDfR3lRdsQ7K9qtyFtYiaeaVKo+7gEKl/K+klwai8/ gninQWHk0zmSCja8Vi77q52WOMkQKapT8+vaON9EVDO8dVEi+CvhAIfPwMafuiwO Rk4X86SzoZu9FP79LcCg9XyGC/XbM2OG9eNUTSCKT40qTTKm5y4gix687NvAlaHR ko5MTsdl0Wfp6Qk0ohT74LnoA2c1g/FluvZIM33ci/2rFpkf9Hw7ip3lUXqn6CPx rKiZ+pVRc0xikVWkraMfIGMJfUd2rhelp8OyoozD7DB7UZw40Q4RW4N5tgq9Fhe9 MQs3p1v9N8xHdRKl365UcOczUxNAmv4u0nV5gY/4FMC6VjldCl2V9fmqYXyzFS4/ Ogg4FSd7c2JyGFKPs+5uXyi+RY2qOX4+nzHOoKD7SY616IYqtgKoz5usxETLwZ6s VtJOmJL0h//z0A7tBliB0zd+SQ5UQQBDC2XouQH2fNX2isJMn0UDmWJGjaHgK6Hh 8jVp6LNqf+CEQS387UxckOyj7fu438hDky1Ggaw4YqowEOhQeqLVO4++x+HITrbp AupXfbJw9h9cMN63Yc0gVxXQ9IMZ+M7UxLtZ3Cd8/PVztNy/clA= =3UUm -----END PGP SIGNATURE----- Merge tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 shadow stack support from Dave Hansen: "This is the long awaited x86 shadow stack support, part of Intel's Control-flow Enforcement Technology (CET). CET consists of two related security features: shadow stacks and indirect branch tracking. This series implements just the shadow stack part of this feature, and just for userspace. The main use case for shadow stack is providing protection against return oriented programming attacks. It works by maintaining a secondary (shadow) stack using a special memory type that has protections against modification. When executing a CALL instruction, the processor pushes the return address to both the normal stack and to the special permission shadow stack. Upon RET, the processor pops the shadow stack copy and compares it to the normal stack copy. For more information, refer to the links below for the earlier versions of this patch set" Link: https://lore.kernel.org/lkml/20220130211838.8382-1-rick.p.edgecombe@intel.com/ Link: https://lore.kernel.org/lkml/20230613001108.3040476-1-rick.p.edgecombe@intel.com/ * tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits) x86/shstk: Change order of __user in type x86/ibt: Convert IBT selftest to asm x86/shstk: Don't retry vm_munmap() on -EINTR x86/kbuild: Fix Documentation/ reference x86/shstk: Move arch detail comment out of core mm x86/shstk: Add ARCH_SHSTK_STATUS x86/shstk: Add ARCH_SHSTK_UNLOCK x86: Add PTRACE interface for shadow stack selftests/x86: Add shadow stack test x86/cpufeatures: Enable CET CR4 bit for shadow stack x86/shstk: Wire in shadow stack interface x86: Expose thread features in /proc/$PID/status x86/shstk: Support WRSS for userspace x86/shstk: Introduce map_shadow_stack syscall x86/shstk: Check that signal frame is shadow stack mem x86/shstk: Check that SSP is aligned on sigreturn x86/shstk: Handle signals for shadow stack x86/shstk: Introduce routines modifying shstk x86/shstk: Handle thread shadow stack x86/shstk: Add user-mode shadow stack support ... |
||
![]() |
ebc1baf5c9 |
mm: free up a word in the first tail page
Store the folio order in the low byte of the flags word in the first tail page. This frees up the word that was being used to store the order and dtor bytes previously. Link: https://lkml.kernel.org/r/20230816151201.3655946-11-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Yanteng Si <siyanteng@loongson.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
de53c05f2a |
mm: add large_rmappable page flag
Stored in the first tail page's flags, this flag replaces the destructor. That removes the last of the destructors, so remove all references to folio_dtor and compound_dtor. Link: https://lkml.kernel.org/r/20230816151201.3655946-9-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Yanteng Si <siyanteng@loongson.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
8dc4a8f1e0 |
mm: convert free_transhuge_folio() to folio_undo_large_rmappable()
Indirect calls are expensive, thanks to Spectre. Test for TRANSHUGE_PAGE_DTOR and destroy the folio appropriately. Move the free_compound_page() call into destroy_large_folio() to simplify later patches. Link: https://lkml.kernel.org/r/20230816151201.3655946-5-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Yanteng Si <siyanteng@loongson.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
5994eabf3b | merge mm-hotfixes-stable into mm-stable to pick up depended-upon changes | ||
![]() |
0790e1e2b1 |
mm: allow fault_dirty_shared_page() to be called under the VMA lock
By making maybe_unlock_mmap_for_io() handle the VMA lock correctly, we make fault_dirty_shared_page() safe to be called without the mmap lock held. Link: https://lkml.kernel.org/r/20230812002033.1002367-1-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reported-by: David Hildenbrand <david@redhat.com> Tested-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
0db31d63f2 |
mm: disable kernelcore=mirror when no mirror memory
For system with kernelcore=mirror enabled while no mirrored memory is reported by efi. This could lead to kernel OOM during startup since all memory beside zone DMA are in the movable zone and this prevents the kernel to use it. Zone DMA/DMA32 initialization is independent of mirrored memory and their max pfn is set in zone_sizes_init(). Since kernel can fallback to zone DMA/DMA32 if there is no memory in zone Normal, these zones are seen as mirrored memory no mather their memory attributes are. To solve this problem, disable kernelcore=mirror when there is no real mirrored memory exists. Link: https://lkml.kernel.org/r/20230802072328.2107981-1-mawupeng1@huawei.com Signed-off-by: Ma Wupeng <mawupeng1@huawei.com> Suggested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Suggested-by: Mike Rapoport <rppt@kernel.org> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Levi Yun <ppbuk5246@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
5805192c7b |
mm/gup: handle cont-PTE hugetlb pages correctly in gup_must_unshare() via GUP-fast
In contrast to most other GUP code, GUP-fast common page table walking
code like gup_pte_range() also handles hugetlb pages. But in contrast to
other hugetlb page table walking code, it does not look at the hugetlb PTE
abstraction whereby we have only a single logical hugetlb PTE per hugetlb
page, even when using multiple cont-PTEs underneath -- which is for
example what huge_ptep_get() abstracts.
So when we have a hugetlb page that is mapped via cont-PTEs, GUP-fast
might stumble over a PTE that does not map the head page of a hugetlb page
-- not the first "head" PTE of such a cont mapping.
Logically, the whole hugetlb page is mapped (entire_mapcount == 1), but we
might end up calling gup_must_unshare() with a tail page of a hugetlb
page.
We only maintain a single PageAnonExclusive flag per hugetlb page (as
hugetlb pages cannot get partially COW-shared), stored for the head page.
That flag is clear for all tail pages.
So when gup_must_unshare() ends up calling PageAnonExclusive() with a tail
page of a hugetlb page:
1) With CONFIG_DEBUG_VM_PGFLAGS
Stumbles over the:
VM_BUG_ON_PGFLAGS(PageHuge(page) && !PageHead(page), page);
For example, when executing the COW selftests with 64k hugetlb pages on
arm64:
[ 61.082187] page:00000000829819ff refcount:3 mapcount:1 mapping:0000000000000000 index:0x1 pfn:0x11ee11
[ 61.082842] head:0000000080f79bf7 order:4 entire_mapcount:1 nr_pages_mapped:0 pincount:2
[ 61.083384] anon flags: 0x17ffff80003000e(referenced|uptodate|dirty|head|mappedtodisk|node=0|zone=2|lastcpupid=0xfffff)
[ 61.084101] page_type: 0xffffffff()
[ 61.084332] raw: 017ffff800000000 fffffc00037b8401 0000000000000402 0000000200000000
[ 61.084840] raw: 0000000000000010 0000000000000000 00000000ffffffff 0000000000000000
[ 61.085359] head: 017ffff80003000e ffffd9e95b09b788 ffffd9e95b09b788 ffff0007ff63cf71
[ 61.085885] head: 0000000000000000 0000000000000002 00000003ffffffff 0000000000000000
[ 61.086415] page dumped because: VM_BUG_ON_PAGE(PageHuge(page) && !PageHead(page))
[ 61.086914] ------------[ cut here ]------------
[ 61.087220] kernel BUG at include/linux/page-flags.h:990!
[ 61.087591] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
[ 61.087999] Modules linked in: ...
[ 61.089404] CPU: 0 PID: 4612 Comm: cow Kdump: loaded Not tainted 6.5.0-rc4+ #3
[ 61.089917] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[ 61.090409] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 61.090897] pc : gup_must_unshare.part.0+0x64/0x98
[ 61.091242] lr : gup_must_unshare.part.0+0x64/0x98
[ 61.091592] sp : ffff8000825eb940
[ 61.091826] x29: ffff8000825eb940 x28: 0000000000000000 x27: fffffc00037b8440
[ 61.092329] x26: 0400000000000001 x25: 0000000000080101 x24: 0000000000080000
[ 61.092835] x23: 0000000000080100 x22: ffff0000cffb9588 x21: ffff0000c8ec6b58
[ 61.093341] x20: 0000ffffad6b1000 x19: fffffc00037b8440 x18: ffffffffffffffff
[ 61.093850] x17: 2864616548656761 x16: 5021202626202965 x15: 6761702865677548
[ 61.094358] x14: 6567615028454741 x13: 2929656761702864 x12: 6165486567615021
[ 61.094858] x11: 00000000ffff7fff x10: 00000000ffff7fff x9 : ffffd9e958b7a1c0
[ 61.095359] x8 : 00000000000bffe8 x7 : c0000000ffff7fff x6 : 00000000002bffa8
[ 61.095873] x5 : ffff0008bb19e708 x4 : 0000000000000000 x3 : 0000000000000000
[ 61.096380] x2 : 0000000000000000 x1 : ffff0000cf6636c0 x0 : 0000000000000046
[ 61.096894] Call trace:
[ 61.097080] gup_must_unshare.part.0+0x64/0x98
[ 61.097392] gup_pte_range+0x3a8/0x3f0
[ 61.097662] gup_pgd_range+0x1ec/0x280
[ 61.097942] lockless_pages_from_mm+0x64/0x1a0
[ 61.098258] internal_get_user_pages_fast+0xe4/0x1d0
[ 61.098612] pin_user_pages_fast+0x58/0x78
[ 61.098917] pin_longterm_test_start+0xf4/0x2b8
[ 61.099243] gup_test_ioctl+0x170/0x3b0
[ 61.099528] __arm64_sys_ioctl+0xa8/0xf0
[ 61.099822] invoke_syscall.constprop.0+0x7c/0xd0
[ 61.100160] el0_svc_common.constprop.0+0xe8/0x100
[ 61.100500] do_el0_svc+0x38/0xa0
[ 61.100736] el0_svc+0x3c/0x198
[ 61.100971] el0t_64_sync_handler+0x134/0x150
[ 61.101280] el0t_64_sync+0x17c/0x180
[ 61.101543] Code: aa1303e0 f00074c1 912b0021 97fffeb2 (d4210000)
2) Without CONFIG_DEBUG_VM_PGFLAGS
Always detects "not exclusive" for passed tail pages and refuses to PIN
the tail pages R/O, as gup_must_unshare() == true. GUP-fast will fallback
to ordinary GUP. As ordinary GUP properly considers the logical hugetlb
PTE abstraction in hugetlb_follow_page_mask(), pinning the page will
succeed when looking at the PageAnonExclusive on the head page only.
So the only real effect of this is that with cont-PTE hugetlb pages, we'll
always fallback from GUP-fast to ordinary GUP when not working on the head
page, which ends up checking the head page and do the right thing.
Consequently, the cow selftests pass with cont-PTE hugetlb pages as well
without CONFIG_DEBUG_VM_PGFLAGS.
Note that this only applies to anon hugetlb pages that are mapped using
cont-PTEs: for example 64k hugetlb pages on a 4k arm64 kernel.
... and only when R/O-pinning (FOLL_PIN) such pages that are mapped into
the page table R/O using GUP-fast.
On production kernels (and even most debug kernels, that don't set
CONFIG_DEBUG_VM_PGFLAGS) this patch should theoretically not be required
to be backported. But of course, it does not hurt.
Link: https://lkml.kernel.org/r/20230805101256.87306-1-david@redhat.com
Fixes:
|
||
![]() |
8b9c1cc041 |
smaps: use vm_normal_page_pmd() instead of follow_trans_huge_pmd()
We shouldn't be using a GUP-internal helper if it can be avoided. Similar to smaps_pte_entry() that uses vm_normal_page(), let's use vm_normal_page_pmd() that similarly refuses to return the huge zeropage. In contrast to follow_trans_huge_pmd(), vm_normal_page_pmd(): (1) Will always return the head page, not a tail page of a THP. If we'd ever call smaps_account with a tail page while setting "compound = true", we could be in trouble, because smaps_account() would look at the memmap of unrelated pages. If we're unlucky, that memmap does not exist at all. Before we removed PG_doublemap, we could have triggered something similar as in commit |
||
![]() |
b5df092264 |
mm: set up vma iterator for vma_iter_prealloc() calls
Set the correct limits for vma_iter_prealloc() calls so that the maple tree can be smarter about how many nodes are needed. Link: https://lkml.kernel.org/r/20230724183157.3939892-11-Liam.Howlett@oracle.com Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Peng Zhang <zhangpeng.00@bytedance.com> Cc: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |