Fix the followng warning:
drivers/iommu/amd/iommu.c:67:30: warning: symbol
'amd_dirty_ops' was not declared. Should it be static?
This variable is only used in its defining file, so it should be static.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231120095342.1102999-1-chentao@kylinos.cn
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This field is set to APIC_DELIVERY_MODE_FIXED in all cases, and is read
exactly once. Fold the constant in uv_program_mmr() and drop the field.
Searching for the origin of the stale HyperV comment reveals commit
a31e58e129 ("x86/apic: Switch all APICs to Fixed delivery mode") which
notes:
As a consequence of this change, the apic::irq_delivery_mode field is
now pointless, but this needs to be cleaned up in a separate patch.
6 years is long enough for this technical debt to have survived.
[ bp: Fold in
https://lore.kernel.org/r/20231121123034.1442059-1-andrew.cooper3@citrix.com
]
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20231102-x86-apic-v1-1-bf049a2a0ed6@citrix.com
Including:
- Core changes:
- Make default-domains mandatory for all IOMMU drivers
- Remove group refcounting
- Add generic_single_device_group() helper and consolidate
drivers
- Cleanup map/unmap ops
- Scaling improvements for the IOVA rcache depot
- Convert dart & iommufd to the new domain_alloc_paging()
- ARM-SMMU:
- Device-tree binding update:
- Add qcom,sm7150-smmu-v2 for Adreno on SM7150 SoC
- SMMUv2:
- Support for Qualcomm SDM670 (MDSS) and SM7150 SoCs
- SMMUv3:
- Large refactoring of the context descriptor code to
move the CD table into the master, paving the way
for '->set_dev_pasid()' support on non-SVA domains
- Minor cleanups to the SVA code
- Intel VT-d:
- Enable debugfs to dump domain attached to a pasid
- Remove an unnecessary inline function.
- AMD IOMMU:
- Initial patches for SVA support (not complete yet)
- S390 IOMMU:
- DMA-API conversion and optimized IOTLB flushing
- Some smaller fixes and improvements
-----BEGIN PGP SIGNATURE-----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=UyWC
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Make default-domains mandatory for all IOMMU drivers
- Remove group refcounting
- Add generic_single_device_group() helper and consolidate drivers
- Cleanup map/unmap ops
- Scaling improvements for the IOVA rcache depot
- Convert dart & iommufd to the new domain_alloc_paging()
ARM-SMMU:
- Device-tree binding update:
- Add qcom,sm7150-smmu-v2 for Adreno on SM7150 SoC
- SMMUv2:
- Support for Qualcomm SDM670 (MDSS) and SM7150 SoCs
- SMMUv3:
- Large refactoring of the context descriptor code to move the CD
table into the master, paving the way for '->set_dev_pasid()'
support on non-SVA domains
- Minor cleanups to the SVA code
Intel VT-d:
- Enable debugfs to dump domain attached to a pasid
- Remove an unnecessary inline function
AMD IOMMU:
- Initial patches for SVA support (not complete yet)
S390 IOMMU:
- DMA-API conversion and optimized IOTLB flushing
And some smaller fixes and improvements"
* tag 'iommu-updates-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (102 commits)
iommu/dart: Remove the force_bypass variable
iommu/dart: Call apple_dart_finalize_domain() as part of alloc_paging()
iommu/dart: Convert to domain_alloc_paging()
iommu/dart: Move the blocked domain support to a global static
iommu/dart: Use static global identity domains
iommufd: Convert to alloc_domain_paging()
iommu/vt-d: Use ops->blocked_domain
iommu/vt-d: Update the definition of the blocking domain
iommu: Move IOMMU_DOMAIN_BLOCKED global statics to ops->blocked_domain
Revert "iommu/vt-d: Remove unused function"
iommu/amd: Remove DMA_FQ type from domain allocation path
iommu: change iommu_map_sgtable to return signed values
iommu/virtio: Add __counted_by for struct viommu_request and use struct_size()
iommu/vt-d: debugfs: Support dumping a specified page table
iommu/vt-d: debugfs: Create/remove debugfs file per {device, pasid}
iommu/vt-d: debugfs: Dump entry pointing to huge page
iommu/vt-d: Remove unused function
iommu/arm-smmu-v3-sva: Remove bond refcount
iommu/arm-smmu-v3-sva: Remove unused iommu_sva handle
iommu/arm-smmu-v3: Rename cdcfg to cd_table
...
domain_alloc_user op already accepts user flags for domain allocation, add
a parent domain pointer and a driver specific user data support as well.
The user data would be tagged with a type for iommu drivers to add their
own driver specific user data per hw_pagetable.
Add a struct iommu_user_data as a bundle of data_ptr/data_len/type from an
iommufd core uAPI structure. Make the user data opaque to the core, since
a userspace driver must match the kernel driver. In the future, if drivers
share some common parameter, there would be a generic parameter as well.
Link: https://lore.kernel.org/r/20231026043938.63898-7-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Co-developed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
IOMMU advertises Access/Dirty bits if the extended feature register reports
it. Relevant AMD IOMMU SDM ref[0] "1.3.8 Enhanced Support for Access and
Dirty Bits"
To enable it set the DTE flag in bits 7 and 8 to enable access, or
access+dirty. With that, the IOMMU starts marking the D and A flags on
every Memory Request or ATS translation request. It is on the VMM side to
steer whether to enable dirty tracking or not, rather than wrongly doing in
IOMMU. Relevant AMD IOMMU SDM ref [0], "Table 7. Device Table Entry (DTE)
Field Definitions" particularly the entry "HAD".
To actually toggle on and off it's relatively simple as it's setting 2 bits
on DTE and flush the device DTE cache.
To get what's dirtied use existing AMD io-pgtable support, by walking the
pagetables over each IOVA, with fetch_pte(). The IOTLB flushing is left to
the caller (much like unmap), and iommu_dirty_bitmap_record() is the one
adding page-ranges to invalidate. This allows caller to batch the flush
over a big span of IOVA space, without the iommu wondering about when to
flush.
Worthwhile sections from AMD IOMMU SDM:
"2.2.3.1 Host Access Support"
"2.2.3.2 Host Dirty Support"
For details on how IOMMU hardware updates the dirty bit see, and expects
from its consequent clearing by CPU:
"2.2.7.4 Updating Accessed and Dirty Bits in the Guest Address Tables"
"2.2.7.5 Clearing Accessed and Dirty Bits"
Quoting the SDM:
"The setting of accessed and dirty status bits in the page tables is
visible to both the CPU and the peripheral when sharing guest page tables.
The IOMMU interlocked operations to update A and D bits must be 64-bit
operations and naturally aligned on a 64-bit boundary"
.. and for the IOMMU update sequence to Dirty bit, essentially is states:
1. Decodes the read and write intent from the memory access.
2. If P=0 in the page descriptor, fail the access.
3. Compare the A & D bits in the descriptor with the read and write
intent in the request.
4. If the A or D bits need to be updated in the descriptor:
* Start atomic operation.
* Read the descriptor as a 64-bit access.
* If the descriptor no longer appears to require an update, release the
atomic lock with
no further action and continue to step 5.
* Calculate the new A & D bits.
* Write the descriptor as a 64-bit access.
* End atomic operation.
5. Continue to the next stage of translation or to the memory access.
Access/Dirty bits readout also need to consider the non-default page-sizes
(aka replicated PTEs as mentined by manual), as AMD supports all powers of
two (except 512G) page sizes.
Select IOMMUFD_DRIVER only if IOMMUFD is enabled considering that IOMMU
dirty tracking requires IOMMUFD.
Link: https://lore.kernel.org/r/20231024135109.73787-12-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add the domain_alloc_user op implementation. To that end, refactor
amd_iommu_domain_alloc() to receive a dev pointer and flags, while renaming
it too, such that it becomes a common function shared with
domain_alloc_user() implementation. The sole difference with
domain_alloc_user() is that we initialize also other fields that
iommu_domain_alloc() does. It lets it return the iommu domain correctly
initialized in one function.
This is in preparation to add dirty enforcement on AMD implementation of
domain_alloc_user.
Link: https://lore.kernel.org/r/20231024135109.73787-11-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
.. as drivers won't see DMA_FQ any more.
See commit a4fdd97622 ("iommu: Use flush queue capability") for
details.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20231016051305.13091-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Drop EXPORT_SYMBOLS for the functions that are not used by any modules.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20231006095706.5694-5-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
No one is using this function. Hence remove it. Also move PCI device
feature detection flags to amd_iommu_types.h as its only used inside
AMD IOMMU driver.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20231006095706.5694-4-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Remove PPR handler and notifier related functions as its not used
anymore. Note that we are retaining PPR interrupt handler support
as it will be re-used when we introduce IOPF support.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20231006095706.5694-3-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
AMD GPU driver which was the only in-kernel user of iommu_v2 module
removed dependency on iommu_v2 module.
Also we are working on adding SVA support in AMD IOMMU driver. Device
drivers are expected to use common SVA framework to enable device
PASID/PRI features.
Removing iommu_v2 module and then adding SVA simplifies the development.
Hence remove iommu_v2 module.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20231006095706.5694-2-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
On s390 when using a paging hypervisor, .iotlb_sync_map is used to sync
mappings by letting the hypervisor inspect the synced IOVA range and
updating a shadow table. This however means that .iotlb_sync_map can
fail as the hypervisor may run out of resources while doing the sync.
This can be due to the hypervisor being unable to pin guest pages, due
to a limit on mapped addresses such as vfio_iommu_type1.dma_entry_limit
or lack of other resources. Either way such a failure to sync a mapping
should result in a DMA_MAPPING_ERROR.
Now especially when running with batched IOTLB flushes for unmap it may
be that some IOVAs have already been invalidated but not yet synced via
.iotlb_sync_map. Thus if the hypervisor indicates running out of
resources, first do a global flush allowing the hypervisor to free
resources associated with these mappings as well a retry creating the
new mappings and only if that also fails report this error to callers.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> # sun50i
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20230928-dma_iommu-v13-1-9e5fc4dacc36@linux.ibm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce helper functions to enable/disable device ATS/PASID/PRI
capabilities independently along with the new pasid_enabled and
pri_enabled variables in struct iommu_dev_data to keep track,
which allows attach_device() and detach_device() to be simplified.
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230921092147.5930-14-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently we use struct iommu_dev_data.iommu_v2 to keep track of the device
ATS, PRI, and PASID capabilities. But these capabilities can be enabled
independently (except PRI requires ATS support). Hence, replace
the iommu_v2 variable with a flags variable, which keep track of the device
capabilities.
From commit 9bf49e36d7 ("PCI/ATS: Handle sharing of PF PRI Capability
with all VFs"), device PRI/PASID is shared between PF and any associated
VFs. Hence use pci_pri_supported() and pci_pasid_features() instead of
pci_find_ext_capability() to check device PRI/PASID support.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230921092147.5930-13-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For AMD IOMMU, the PPR feature is needed to support IO page fault (IOPF).
PPR is enabled per PCI end-point device, and is configured by the PPR bit
in the IOMMU device table entry (i.e DTE[PPR]).
Introducing struct iommu_dev_data.ppr track PPR setting for each device.
Also iommu_dev_data.ppr will be set only when IOMMU supports PPR. Hence
remove redundant feature support check in set_dte_entry().
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230921092147.5930-12-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Remove nested structure and make it as 'ats_{enable/qdep}'.
Also convert 'dev_data.pri_tlp' to bit field.
No functional changes intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230921092147.5930-11-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In order to support v2 page table, IOMMU driver need to check if the
hardware can support Guest Translation (GT) and Peripheral Page Request
(PPR) features. Currently, IOMMU driver uses global (amd_iommu_v2_present)
and per-iommu (struct amd_iommu.is_iommu_v2) variables to track the
features. There variables area redundant since we could simply just check
the global EFR mask.
Therefore, replace it with a helper function with appropriate name.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230921092147.5930-10-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, IOMMU driver assumes capabilities on all IOMMU instances to be
homogeneous. During early_amd_iommu_init(), the driver probes all IVHD
blocks and do sanity check to make sure that only features common among all
IOMMU instances are supported. This is tracked in the global amd_iommu_efr
and amd_iommu_efr2, which should be used whenever the driver need to check
hardware capabilities.
Therefore, introduce check_feature() and check_feature2(), and modify
the driver to adopt the new helper functions.
In addition, clean up the print_iommu_info() to avoid reporting redundant
EFR/EFR2 for each IOMMU instance.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230921092147.5930-9-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
* Use the protection_domain_free() helper function to free domain.
The function has been modified to also free memory used for the v1 and v2
page tables. Also clear gcr3 table in v2 page table free path.
* Refactor code into cleanup_domain() for reusability. Change BUG_ON to
WARN_ON in cleanup path.
* Protection domain dev_cnt should be read when the domain is locked.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230921092147.5930-8-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Refactor domain_enable_v2() into helper functions for managing GCR3 table
(i.e. setup_gcr3_table() and get_gcr3_levels()), which will be used in
subsequent patches. Also re-arrange code and remove forward declaration.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230921092147.5930-6-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To replace if-else with switch-case statement due to increasing number of
domain types.
No functional changes intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230921092147.5930-5-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move the logic into the common caller function to simplify the code.
No functional changes intended.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230921092147.5930-4-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Rename send_cleanup_vector() to vector_schedule_cleanup() to prepare for
replacing the vector cleanup IPI with a timer callback.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20230621171248.6805-2-xin3.li@intel.com
The AMD IOMMU has three log buffers (i.e. Event, PPR, and GA). The IOMMU
driver processes these log entries when it receive an IOMMU interrupt.
Then, it needs to clear the corresponding interrupt status bits. Also, when
an overflow occurs, it needs to handle the log overflow by clearing the
specific overflow status bit and restart the log.
Since, logic for handling these logs is the same, refactor the code into a
helper function called amd_iommu_handle_irq(), which handles the steps
described. Then, reuse it for all types of log.
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde<vasant.hegde@amd.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230628053222.5962-2-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some ATS-capable peripherals can issue requests to the processor to service
peripheral page requests using PCIe PRI (the Page Request Interface). IOMMU
supports PRI using PPR log buffer. IOMMU writes PRI request to PPR log
buffer and sends PPR interrupt to host. When there is no space in the
PPR log buffer (PPR log overflow) it will set PprOverflow bit in 'MMIO
Offset 2020h IOMMU Status Register'. When this happens PPR log needs to be
restarted as specified in IOMMU spec [1] section 2.6.2.
When handling the event it just resumes the PPR log without resizing
(similar to the way event and GA log overflow is handled).
Failing to handle PPR overflow means device may not work properly as
IOMMU stops processing new PPR events from device.
[1] https://www.amd.com/system/files/TechDocs/48882_3.07_PUB.pdf
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20230628051624.5792-3-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Each IOMMU has three log buffers (Event, GA and PPR log). Once a buffer
becomes full, IOMMU generates an interrupt with the corresponding overflow
status bit, and stop processing the log. To handle an overflow, the IOMMU
driver needs to disable the log, clear the overflow status bit, and
re-enable the log. This procedure is same among all types of log
buffer except it uses different overflow status bit and enabling bit.
Hence, to consolidate the log buffer restarting logic, introduce a helper
function amd_iommu_restart_log(), which caller can specify parameters
specific for each type of log buffer.
Also rename MMIO_STATUS_EVT_OVERFLOW_INT_MASK as
MMIO_STATUS_EVT_OVERFLOW_MASK.
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20230628051624.5792-2-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Including:
- Core changes:
- iova_magazine_alloc() optimization
- Make flush-queue an IOMMU driver capability
- Consolidate the error handling around device attachment
- AMD IOMMU changes:
- AVIC Interrupt Remapping Improvements
- Some minor fixes and cleanups
- Intel VT-d changes from Lu Baolu:
- Small and misc cleanups
- ARM-SMMU changes from Will Deacon:
- Device-tree binding updates:
* Add missing clocks for SC8280XP and SA8775 Adreno SMMUs
* Add two new Qualcomm SMMUs in SDX75 and SM6375
- Workarounds for Arm MMU-700 errata:
* 1076982: Avoid use of SEV-based cmdq wakeup
* 2812531: Terminate command batches with a CMD_SYNC
* Enforce single-stage translation to avoid nesting-related errata
- Set the correct level hint for range TLB invalidation on teardown
- Some other minor fixes and cleanups (including Freescale PAMU and
virtio-iommu changes)
-----BEGIN PGP SIGNATURE-----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=aRMe
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- iova_magazine_alloc() optimization
- Make flush-queue an IOMMU driver capability
- Consolidate the error handling around device attachment
AMD IOMMU changes:
- AVIC Interrupt Remapping Improvements
- Some minor fixes and cleanups
Intel VT-d changes from Lu Baolu:
- Small and misc cleanups
ARM-SMMU changes from Will Deacon:
- Device-tree binding updates:
- Add missing clocks for SC8280XP and SA8775 Adreno SMMUs
- Add two new Qualcomm SMMUs in SDX75 and SM6375
- Workarounds for Arm MMU-700 errata:
- 1076982: Avoid use of SEV-based cmdq wakeup
- 2812531: Terminate command batches with a CMD_SYNC
- Enforce single-stage translation to avoid nesting-related errata
- Set the correct level hint for range TLB invalidation on teardown
.. and some other minor fixes and cleanups (including Freescale PAMU
and virtio-iommu changes)"
* tag 'iommu-updates-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (50 commits)
iommu/vt-d: Remove commented-out code
iommu/vt-d: Remove two WARN_ON in domain_context_mapping_one()
iommu/vt-d: Handle the failure case of dmar_reenable_qi()
iommu/vt-d: Remove unnecessary (void*) conversions
iommu/amd: Remove extern from function prototypes
iommu/amd: Use BIT/BIT_ULL macro to define bit fields
iommu/amd: Fix DTE_IRQ_PHYS_ADDR_MASK macro
iommu/amd: Fix compile error for unused function
iommu/amd: Improving Interrupt Remapping Table Invalidation
iommu/amd: Do not Invalidate IRT when IRTE caching is disabled
iommu/amd: Introduce Disable IRTE Caching Support
iommu/amd: Remove the unused struct amd_ir_data.ref
iommu/amd: Switch amd_iommu_update_ga() to use modify_irte_ga()
iommu/arm-smmu-v3: Set TTL invalidation hint better
iommu/arm-smmu-v3: Document nesting-related errata
iommu/arm-smmu-v3: Add explicit feature for nesting
iommu/arm-smmu-v3: Document MMU-700 erratum 2812531
iommu/arm-smmu-v3: Work around MMU-600 erratum 1076982
dt-bindings: arm-smmu: Add SDX75 SMMU compatible
dt-bindings: arm-smmu: Add SM6375 GPU SMMU
...
- Introduce cmpxchg128() -- aka. the demise of cmpxchg_double().
The cmpxchg128() family of functions is basically & functionally
the same as cmpxchg_double(), but with a saner interface: instead
of a 6-parameter horror that forced u128 - u64/u64-halves layout
details on the interface and exposed users to complexity,
fragility & bugs, use a natural 3-parameter interface with u128 types.
- Restructure the generated atomic headers, and add
kerneldoc comments for all of the generic atomic{,64,_long}_t
operations. Generated definitions are much cleaner now,
and come with documentation.
- Implement lock_set_cmp_fn() on lockdep, for defining an ordering
when taking multiple locks of the same type. This gets rid of
one use of lockdep_set_novalidate_class() in the bcache code.
- Fix raw_cpu_generic_try_cmpxchg() bug due to an unintended
variable shadowing generating garbage code on Clang on certain
ARM builds.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=DsYj
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Introduce cmpxchg128() -- aka. the demise of cmpxchg_double()
The cmpxchg128() family of functions is basically & functionally the
same as cmpxchg_double(), but with a saner interface.
Instead of a 6-parameter horror that forced u128 - u64/u64-halves
layout details on the interface and exposed users to complexity,
fragility & bugs, use a natural 3-parameter interface with u128
types.
- Restructure the generated atomic headers, and add kerneldoc comments
for all of the generic atomic{,64,_long}_t operations.
The generated definitions are much cleaner now, and come with
documentation.
- Implement lock_set_cmp_fn() on lockdep, for defining an ordering when
taking multiple locks of the same type.
This gets rid of one use of lockdep_set_novalidate_class() in the
bcache code.
- Fix raw_cpu_generic_try_cmpxchg() bug due to an unintended variable
shadowing generating garbage code on Clang on certain ARM builds.
* tag 'locking-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
locking/atomic: scripts: fix ${atomic}_dec_if_positive() kerneldoc
percpu: Fix self-assignment of __old in raw_cpu_generic_try_cmpxchg()
locking/atomic: treewide: delete arch_atomic_*() kerneldoc
locking/atomic: docs: Add atomic operations to the driver basic API documentation
locking/atomic: scripts: generate kerneldoc comments
docs: scripts: kernel-doc: accept bitwise negation like ~@var
locking/atomic: scripts: simplify raw_atomic*() definitions
locking/atomic: scripts: simplify raw_atomic_long*() definitions
locking/atomic: scripts: split pfx/name/sfx/order
locking/atomic: scripts: restructure fallback ifdeffery
locking/atomic: scripts: build raw_atomic_long*() directly
locking/atomic: treewide: use raw_atomic*_<op>()
locking/atomic: scripts: add trivial raw_atomic*_<op>()
locking/atomic: scripts: factor out order template generation
locking/atomic: scripts: remove leftover "${mult}"
locking/atomic: scripts: remove bogus order parameter
locking/atomic: xtensa: add preprocessor symbols
locking/atomic: x86: add preprocessor symbols
locking/atomic: sparc: add preprocessor symbols
locking/atomic: sh: add preprocessor symbols
...
Recent changes introduced a compile error:
drivers/iommu/amd/iommu.c:1285:13: error: ‘iommu_flush_irt_and_complete’ defined but not used [-Werror=unused-function]
1285 | static void iommu_flush_irt_and_complete(struct amd_iommu *iommu, u16 devid)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
This happens with defconfig-x86_64 because AMD IOMMU is enabled but
CONFIG_IRQ_REMAP is disabled. Move the function under #ifdef
CONFIG_IRQ_REMAP to fix the error.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Invalidating Interrupt Remapping Table (IRT) requires, the AMD IOMMU driver
to issue INVALIDATE_INTERRUPT_TABLE and COMPLETION_WAIT commands.
Currently, the driver issues the two commands separately, which requires
calling raw_spin_lock_irqsave() twice. In addition, the COMPLETION_WAIT
could potentially be interleaved with other commands causing delay of
the COMPLETION_WAIT command.
Therefore, combine issuing of the two commands in one spin-lock, and
changing struct amd_iommu.cmd_sem_val to use atomic64 to minimize
locking.
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20230530141137.14376-6-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
With the Interrupt Remapping Table cache disabled, there is no need to
issue invalidate IRT and wait for its completion. Therefore, add logic
to bypass the operation.
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Suggested-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20230530141137.14376-5-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since the amd_iommu_update_ga() has been switched to use the
modify_irte_ga() helper function to update the IRTE, the parameter
is no longer needed.
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Suggested-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20230530141137.14376-3-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The modify_irte_ga() uses cmpxchg_double() to update the IRTE in one shot,
which is necessary when adding IRTE cache disabling support since
the driver no longer need to flush the IRT for hardware to take effect.
Please note that there is a functional change where the IsRun and
Destination bits of IRTE are now cached in the struct amd_ir_data.entry.
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20230530141137.14376-2-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOMMU v2 page table supports 4 level (47 bit) or 5 level (56 bit) virtual
address space. Current code assumes it can support 64bit IOVA address
space. If IOVA allocator allocates virtual address > 47/56 bit (depending
on page table level) then it will do wrong mapping and cause invalid
translation.
Hence adjust aperture size to use max address supported by the page table.
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Fixes: aaac38f614 ("iommu/amd: Initial support for AMD IOMMU v2 page table")
Cc: <Stable@vger.kernel.org> # v6.0+
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230518054351.9626-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Passing a special type to domain_alloc to indirectly query whether flush
queues are a worthwhile optimisation with the given driver is a bit
clunky, and looking increasingly anachronistic. Let's put that into an
explicit capability instead.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com> # amd, intel, smmu-v3
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/f0086a93dbccb92622e1ace775846d81c1c4b174.1683233867.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When running on an AMD vIOMMU, we observed multiple invalidations (of
decreasing power of 2 aligned sizes) when unmapping a single page.
Domain flush takes gather bounds (end-start) as size param. However,
gather->end is defined as the last inclusive address (start + size - 1).
This leads to an off by 1 error.
With this patch, verified that 1 invalidation occurs when unmapping a
single page.
Fixes: a270be1b3f ("iommu/amd: Use only natural aligned flushes in a VM")
Cc: stable@vger.kernel.org # >= 5.15
Signed-off-by: Jon Pan-Doh <pandoh@google.com>
Tested-by: Sudheer Dantuluri <dantuluris@google.com>
Suggested-by: Gary Zibrat <gzibrat@google.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Acked-by: Nadav Amit <namit@vmware.com>
Link: https://lore.kernel.org/r/20230426203256.237116-1-pandoh@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Drivers are supposed to list the domain types they support in their
domain_alloc() ops so when we add new domain types, like BLOCKING or SVA,
they don't start breaking.
This ended up providing an empty UNMANAGED domain when the core code asked
for a BLOCKING domain, which happens to be the fallback for drivers that
don't support it, but this is completely wrong for SVA.
Check for the DMA types AMD supports and reject every other kind.
Fixes: 136467962e ("iommu: Add IOMMU SVA domain support")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/0-v1-2ac37b893728+da-amd_check_types_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
GALog exists to propagate interrupts into all vCPUs in the system when
interrupts are marked as non running (e.g. when vCPUs aren't running). A
GALog overflow happens when there's in no space in the log to record the
GATag of the interrupt. So when the GALOverflow condition happens, the
GALog queue is processed and the GALog is restarted, as the IOMMU
manual indicates in section "2.7.4 Guest Virtual APIC Log Restart
Procedure":
| * Wait until MMIO Offset 2020h[GALogRun]=0b so that all request
| entries are completed as circumstances allow. GALogRun must be 0b to
| modify the guest virtual APIC log registers safely.
| * Write MMIO Offset 0018h[GALogEn]=0b.
| * As necessary, change the following values (e.g., to relocate or
| resize the guest virtual APIC event log):
| - the Guest Virtual APIC Log Base Address Register
| [MMIO Offset 00E0h],
| - the Guest Virtual APIC Log Head Pointer Register
| [MMIO Offset 2040h][GALogHead], and
| - the Guest Virtual APIC Log Tail Pointer Register
| [MMIO Offset 2048h][GALogTail].
| * Write MMIO Offset 2020h[GALOverflow] = 1b to clear the bit (W1C).
| * Write MMIO Offset 0018h[GALogEn] = 1b, and either set
| MMIO Offset 0018h[GAIntEn] to enable the GA log interrupt or clear
| the bit to disable it.
Failing to handle the GALog overflow means that none of the VFs (in any
guest) will work with IOMMU AVIC forcing the user to power cycle the
host. When handling the event it resumes the GALog without resizing
much like how it is done in the event handler overflow. The
[MMIO Offset 2020h][GALOverflow] bit might be set in status register
without the [MMIO Offset 2020h][GAInt] bit, so when deciding to poll
for GA events (to clear space in the galog), also check the overflow
bit.
[suravee: Check for GAOverflow without GAInt, toggle CONTROL_GAINT_EN]
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20230419201154.83880-3-joao.m.martins@oracle.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
On KVM GSI routing table updates, specially those where they have vIOMMUs
with interrupt remapping enabled (to boot >255vcpus setups without relying
on KVM_FEATURE_MSI_EXT_DEST_ID), a VMM may update the backing VF MSIs
with a new VCPU affinity.
On AMD with AVIC enabled, the new vcpu affinity info is updated via:
avic_pi_update_irte()
irq_set_vcpu_affinity()
amd_ir_set_vcpu_affinity()
amd_iommu_{de}activate_guest_mode()
Where the IRTE[GATag] is updated with the new vcpu affinity. The GATag
contains VM ID and VCPU ID, and is used by IOMMU hardware to signal KVM
(via GALog) when interrupt cannot be delivered due to vCPU is in
blocking state.
The issue is that amd_iommu_activate_guest_mode() will essentially
only change IRTE fields on transitions from non-guest-mode to guest-mode
and otherwise returns *with no changes to IRTE* on already configured
guest-mode interrupts. To the guest this means that the VF interrupts
remain affined to the first vCPU they were first configured, and guest
will be unable to issue VF interrupts and receive messages like this
from spurious interrupts (e.g. from waking the wrong vCPU in GALog):
[ 167.759472] __common_interrupt: 3.34 No irq handler for vector
[ 230.680927] mlx5_core 0000:00:02.0: mlx5_cmd_eq_recover:247:(pid
3122): Recovered 1 EQEs on cmd_eq
[ 230.681799] mlx5_core 0000:00:02.0:
wait_func_handle_exec_timeout:1113:(pid 3122): cmd[0]: CREATE_CQ(0x400)
recovered after timeout
[ 230.683266] __common_interrupt: 3.34 No irq handler for vector
Given the fact that amd_ir_set_vcpu_affinity() uses
amd_iommu_activate_guest_mode() underneath it essentially means that VCPU
affinity changes of IRTEs are nops. Fix it by dropping the check for
guest-mode at amd_iommu_activate_guest_mode(). Same thing is applicable to
amd_iommu_deactivate_guest_mode() although, even if the IRTE doesn't change
underlying DestID on the host, the VFIO IRQ handler will still be able to
poke at the right guest-vCPU.
Fixes: b9c6ff94e4 ("iommu/amd: Re-factor guest virtual APIC (de-)activation code")
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20230419201154.83880-2-joao.m.martins@oracle.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
With the addition of the V2 page table support, the domain page size
bitmap needs to be set prior to iommu core setting up direct mappings
for reserved regions. When reserved regions are mapped, if this is not
done, it will be looking at the V1 page size bitmap when determining
the page size to use in iommu_pgsize(). When it gets into the actual
amd mapping code, a check of see if the page size is supported can
fail, because at that point it is checking it against the V2 page size
bitmap which only supports 4K, 2M, and 1G.
Add a check to __iommu_domain_alloc() to not override the
bitmap if it was already set by the iommu ops domain_alloc() code path.
Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Joerg Roedel <joro@8bytes.org>
Fixes: 4db6c41f09 ("iommu/amd: Add support for using AMD IOMMU v2 page table for DMA-API")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20230404072742.1895252-1-jsnitsel@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce 'struct protection_domain->nid' variable. It will contain
IOMMU NUMA node ID. And allocate page table pages using IOMMU numa
locality info. This optimizes page table walk by IOMMU.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20230321092348.6127-2-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some polishing and small fixes for iommufd:
- Remove IOMMU_CAP_INTR_REMAP, instead rely on the interrupt subsystem
- Use GFP_KERNEL_ACCOUNT inside the iommu_domains
- Support VFIO_NOIOMMU mode with iommufd
- Various typos
- A list corruption bug if HWPTs are used for attach
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCY/TgzQAKCRCFwuHvBreF
Ya3AAP4/WxTJIbDvtTyH3Fae3NxTdO8j8gsUvU1vrRYG83zdnAEAxd1yii7GEO8D
crkeq9D4FUiPAkFnJ64Exw2FHb060Qg=
=RABK
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Some polishing and small fixes for iommufd:
- Remove IOMMU_CAP_INTR_REMAP, instead rely on the interrupt
subsystem
- Use GFP_KERNEL_ACCOUNT inside the iommu_domains
- Support VFIO_NOIOMMU mode with iommufd
- Various typos
- A list corruption bug if HWPTs are used for attach"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Do not add the same hwpt to the ioas->hwpt_list twice
iommufd: Make sure to zero vfio_iommu_type1_info before copying to user
vfio: Support VFIO_NOIOMMU with iommufd
iommufd: Add three missing structures in ucmd_buffer
selftests: iommu: Fix test_cmd_destroy_access() call in user_copy
iommu: Remove IOMMU_CAP_INTR_REMAP
irq/s390: Add arch_is_isolated_msi() for s390
iommu/x86: Replace IOMMU_CAP_INTR_REMAP with IRQ_DOMAIN_FLAG_ISOLATED_MSI
genirq/msi: Rename IRQ_DOMAIN_MSI_REMAP to IRQ_DOMAIN_ISOLATED_MSI
genirq/irqdomain: Remove unused irq_domain_check_msi_remap() code
iommufd: Convert to msi_device_has_isolated_msi()
vfio/type1: Convert to iommu_group_has_isolated_msi()
iommu: Add iommu_group_has_isolated_msi()
genirq/msi: Add msi_device_has_isolated_msi()
Flow:
- Booted system with SNP enabled, memory encryption off and
IOMMU DMA translation mode
- AMD driver detects v2 capable device and amd_iommu_def_domain_type()
returns identity mode
- amd_iommu_domain_alloc() returns NULL an SNP is enabled
- System will fail to register device
On SNP enabled system, passthrough mode is not supported. IOMMU default
domain is set to translation mode. We need to return zero from
amd_iommu_def_domain_type() so that it allocates translation domain.
Fixes: fb2accadaa ("iommu/amd: Introduce function to check and enable SNP")
CC: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20230207091752.7656-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Current code clears event log and ppr log entry after processing it due
to hardware errata ([1] erratum #732, #733). We do not have hardware
issue on SNP enabled system.
When SNP is enabled, the event logs, PPR log and completion wait buffer
are read-only to the host (see SNP FW ABI spec [2]). Clearing those entry
will result in a kernel #PF for an RMP violation. Hence do not clear
event and ppr log entry after processing it.
[1] http://developer.amd.com/wordpress/media/2012/10/48931_15h_Mod_10h-1Fh_Rev_Guide.pdf
[2] https://www.amd.com/system/files/TechDocs/56860.pdf
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20230117044038.5728-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In passthrough mode we do not use IOMMU page table. Hence we don't need
to allocate io_pgtable_ops.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20230105091728.42469-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu core calls the driver's detach_dev domain op callback only when
a device is finished assigning to user space and
iommu_group_release_dma_owner() is called to return the device to the
kernel, where iommu core wants to set the default domain to the device but
the driver didn't provide one.
In other words, if any iommu driver provides default domain support, the
.detach_dev callback will never be called. This removes the detach_dev
callbacks in those IOMMU drivers that support default domain.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev> # apple-dart
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com> # sprd
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com> # amd
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230110025408.667767-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
On x86 platforms when the HW can support interrupt remapping the iommu
driver creates an irq_domain for the IR hardware and creates a child MSI
irq_domain.
When the global irq_remapping_enabled is set, the IR MSI domain is
assigned to the PCI devices (by intel_irq_remap_add_device(), or
amd_iommu_set_pci_msi_domain()) making those devices have the isolated MSI
property.
Due to how interrupt domains work, setting IRQ_DOMAIN_FLAG_ISOLATED_MSI on
the parent IR domain will cause all struct devices attached to it to
return true from msi_device_has_isolated_msi(). This replaces the
IOMMU_CAP_INTR_REMAP flag as all places using IOMMU_CAP_INTR_REMAP also
call msi_device_has_isolated_msi()
Set the flag and delete the cap.
Link: https://lore.kernel.org/r/7-v3-3313bb5dd3a3+10f11-secure_msi_jgg@nvidia.com
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Including:
- Core code:
- map/unmap_pages() cleanup
- SVA and IOPF refactoring
- Clean up and document return codes from device/domain
attachment code
- AMD driver:
- Rework and extend parsing code for ivrs_ioapic, ivrs_hpet
and ivrs_acpihid command line options
- Some smaller cleanups
- Intel driver:
- Blocking domain support
- Cleanups
- S390 driver:
- Fixes and improvements for attach and aperture handling
- PAMU driver:
- Resource leak fix and cleanup
- Rockchip driver:
- Page table permission bit fix
- Mediatek driver:
- Improve safety from invalid dts input
- Smaller fixes and improvements
- Exynos driver:
- Fix driver initialization sequence
- Sun50i driver:
- Remove IOMMU_DOMAIN_IDENTITY as it has not been working
forever
- Various other fixes
-----BEGIN PGP SIGNATURE-----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=ZM/m
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core code:
- map/unmap_pages() cleanup
- SVA and IOPF refactoring
- Clean up and document return codes from device/domain attachment
AMD driver:
- Rework and extend parsing code for ivrs_ioapic, ivrs_hpet and
ivrs_acpihid command line options
- Some smaller cleanups
Intel driver:
- Blocking domain support
- Cleanups
S390 driver:
- Fixes and improvements for attach and aperture handling
PAMU driver:
- Resource leak fix and cleanup
Rockchip driver:
- Page table permission bit fix
Mediatek driver:
- Improve safety from invalid dts input
- Smaller fixes and improvements
Exynos driver:
- Fix driver initialization sequence
Sun50i driver:
- Remove IOMMU_DOMAIN_IDENTITY as it has not been working forever
- Various other fixes"
* tag 'iommu-updates-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (74 commits)
iommu/mediatek: Fix forever loop in error handling
iommu/mediatek: Fix crash on isr after kexec()
iommu/sun50i: Remove IOMMU_DOMAIN_IDENTITY
iommu/amd: Fix typo in macro parameter name
iommu/mediatek: Remove unused "mapping" member from mtk_iommu_data
iommu/mediatek: Improve safety for mediatek,smi property in larb nodes
iommu/mediatek: Validate number of phandles associated with "mediatek,larbs"
iommu/mediatek: Add error path for loop of mm_dts_parse
iommu/mediatek: Use component_match_add
iommu/mediatek: Add platform_device_put for recovering the device refcnt
iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe()
iommu/vt-d: Use real field for indication of first level
iommu/vt-d: Remove unnecessary domain_context_mapped()
iommu/vt-d: Rename domain_add_dev_info()
iommu/vt-d: Rename iommu_disable_dev_iotlb()
iommu/vt-d: Add blocking domain support
iommu/vt-d: Add device_block_translation() helper
iommu/vt-d: Allocate pasid table in device probe path
iommu/amd: Check return value of mmu_notifier_register()
iommu/amd: Fix pci device refcount leak in ppr_notifier()
...
iommufd is the user API to control the IOMMU subsystem as it relates to
managing IO page tables that point at user space memory.
It takes over from drivers/vfio/vfio_iommu_type1.c (aka the VFIO
container) which is the VFIO specific interface for a similar idea.
We see a broad need for extended features, some being highly IOMMU device
specific:
- Binding iommu_domain's to PASID/SSID
- Userspace IO page tables, for ARM, x86 and S390
- Kernel bypassed invalidation of user page tables
- Re-use of the KVM page table in the IOMMU
- Dirty page tracking in the IOMMU
- Runtime Increase/Decrease of IOPTE size
- PRI support with faults resolved in userspace
Many of these HW features exist to support VM use cases - for instance the
combination of PASID, PRI and Userspace IO Page Tables allows an
implementation of DMA Shared Virtual Addressing (vSVA) within a
guest. Dirty tracking enables VM live migration with SRIOV devices and
PASID support allow creating "scalable IOV" devices, among other things.
As these features are fundamental to a VM platform they need to be
uniformly exposed to all the driver families that do DMA into VMs, which
is currently VFIO and VDPA.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCY5ct7wAKCRCFwuHvBreF
YZZ5AQDciXfcgXLt0UBEmWupNb0f/asT6tk717pdsKm8kAZMNAEAsIyLiKT5HqGl
s7fAu+CQ1pr9+9NKGevD+frw8Solsw4=
=jJkd
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd implementation from Jason Gunthorpe:
"iommufd is the user API to control the IOMMU subsystem as it relates
to managing IO page tables that point at user space memory.
It takes over from drivers/vfio/vfio_iommu_type1.c (aka the VFIO
container) which is the VFIO specific interface for a similar idea.
We see a broad need for extended features, some being highly IOMMU
device specific:
- Binding iommu_domain's to PASID/SSID
- Userspace IO page tables, for ARM, x86 and S390
- Kernel bypassed invalidation of user page tables
- Re-use of the KVM page table in the IOMMU
- Dirty page tracking in the IOMMU
- Runtime Increase/Decrease of IOPTE size
- PRI support with faults resolved in userspace
Many of these HW features exist to support VM use cases - for instance
the combination of PASID, PRI and Userspace IO Page Tables allows an
implementation of DMA Shared Virtual Addressing (vSVA) within a guest.
Dirty tracking enables VM live migration with SRIOV devices and PASID
support allow creating "scalable IOV" devices, among other things.
As these features are fundamental to a VM platform they need to be
uniformly exposed to all the driver families that do DMA into VMs,
which is currently VFIO and VDPA"
For more background, see the extended explanations in Jason's pull request:
https://lore.kernel.org/lkml/Y5dzTU8dlmXTbzoJ@nvidia.com/
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (62 commits)
iommufd: Change the order of MSI setup
iommufd: Improve a few unclear bits of code
iommufd: Fix comment typos
vfio: Move vfio group specific code into group.c
vfio: Refactor dma APIs for emulated devices
vfio: Wrap vfio group module init/clean code into helpers
vfio: Refactor vfio_device open and close
vfio: Make vfio_device_open() truly device specific
vfio: Swap order of vfio_device_container_register() and open_device()
vfio: Set device->group in helper function
vfio: Create wrappers for group register/unregister
vfio: Move the sanity check of the group to vfio_create_group()
vfio: Simplify vfio_create_group()
iommufd: Allow iommufd to supply /dev/vfio/vfio
vfio: Make vfio_container optionally compiled
vfio: Move container related MODULE_ALIAS statements into container.c
vfio-iommufd: Support iommufd for emulated VFIO devices
vfio-iommufd: Support iommufd for physical VFIO devices
vfio-iommufd: Allow iommufd to be used in place of a container fd
vfio: Use IOMMU_CAP_ENFORCE_CACHE_COHERENCY for vfio_file_enforced_coherent()
...
PCI/IMS works like PCI/MSI-X in the remapping. Just add the feature flag,
but only when on real hardware.
Virtualized IOMMUs need additional support.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232327.140571546@linutronix.de
Remove the global PCI/MSI irqdomain implementation and provide the required
MSI parent ops so the PCI/MSI code can detect the new parent and setup per
device domains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232326.209212272@linutronix.de
Enable MSI parent domain support in the x86 vector domain and fixup the
checks in the iommu implementations to check whether device::msi::domain is
the default MSI parent domain. That keeps the existing logic to protect
e.g. devices behind VMD working.
The interrupt remap PCI/MSI code still works because the underlying vector
domain still provides the same functionality.
None of the other x86 PCI/MSI, e.g. XEN and HyperV, implementations are
affected either. They still work the same way both at the low level and the
PCI/MSI implementations they provide.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232326.034672592@linutronix.de
This queries if a domain linked to a device should expect to support
enforce_cache_coherency() so iommufd can negotiate the rules for when a
domain should be shared or not.
For iommufd a device that declares IOMMU_CAP_ENFORCE_CACHE_COHERENCY will
not be attached to a domain that does not support it.
Link: https://lore.kernel.org/r/1-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Now that the PCI/MSI core code does early checking for multi-MSI support
X86_IRQ_ALLOC_CONTIGUOUS_VECTORS is not required anymore.
Remove the flag and rely on MSI_FLAG_MULTI_PCI_MSI.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122015.865042356@linutronix.de
Variable cnt is just being incremented and it's never used
anywhere else. The variable and the increment are redundant so
remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20221024134301.2158939-1-colin.i.king@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The same checks are done in amd_iommu_probe_device(). If any of them fails
there, then the device won't get a group, so there's no way for it to even
reach amd_iommu_attach_device anymore.
Link: https://lore.kernel.org/r/c054654a81f2b675c73108fe4bf10e45335a721a.1666042872.git.nicolinc@nvidia.com
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add gfp parameter to iommu_alloc_resv_region() for the callers to specify
the memory allocation behavior. Thus iommu_alloc_resv_region() could also
be available in critical contexts.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20220927053109.4053662-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
AMD IOMMU introduces support for Guest I/O protection where the request
from the I/O device without a PASID are treated as if they have PASID 0.
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220825063939.8360-8-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, PPR/ATS can be enabled only if the domain is type
identity mapping. However, when allowing the IOMMU v2 page table
to be used for DMA-API, the check is no longer valid.
Update the sanity check to only apply for when using AMD_IOMMU_V1
page table mode.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220825063939.8360-6-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The current function to enable IOMMU v2 also lock the domain.
In order to reuse the same code in different code path, in which
the domain has already been locked, refactor the function to separate
the locking from the enabling logic.
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220825063939.8360-5-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Implement the map_pages() and unmap_pages() callback for the AMD IOMMU
driver to allow calls from iommu core to map and unmap multiple pages.
Also deprecate map/unmap callbacks.
Finally gatherer is not updated by iommu_v1_unmap_pages(). Hence pass
NULL instead of gather to iommu_v1_unmap_pages.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220825063939.8360-4-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
With all callers now converted to the device-specific version, retire
the old bus-based interface, and give drivers the chance to indicate
accurate per-instance capabilities.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/d8bd8777d06929ad8f49df7fc80e1b9af32a41b5.1660574547.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We started using a 64 bit completion value. Unfortunately, we only
stored the low 32-bits, so a very large completion value would never
be matched in iommu_completion_wait().
Fixes: c69d89aff3 ("iommu/amd: Use 4K page for completion wait write-back semaphore")
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Link: https://lore.kernel.org/r/20220801192229.3358786-1-jsperbeck@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Once SNP is enabled (by executing SNP_INIT command), IOMMU can no longer
support the passthrough domain (i.e. IOMMU_DOMAIN_IDENTITY).
The SNP_INIT command is called early in the boot process, and would fail
if the kernel is configure to default to passthrough mode.
After the system is already booted, users can try to change IOMMU domain
type of a particular IOMMU group. In this case, the IOMMU driver needs to
check the SNP-enable status and return failure when requesting to change
domain type to identity.
Therefore, return failure when trying to allocate identity domain.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220713225651.20758-9-suravee.suthikulpanit@amd.com
[ joro: Removed WARN_ON_ONCE() ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
On AMD system with SNP enabled, IOMMU hardware checks the host translation
valid (TV) and guest translation valid (GV) bits in the device table entry
(DTE) before accessing the corresponded page tables.
However, current IOMMU driver sets the TV bit for all devices regardless
of whether the host page table is in use. This results in
ILLEGAL_DEV_TABLE_ENTRY event for devices, which do not the host page
table root pointer set up.
Thefore, when SNP is enabled, only set TV bit when DMA remapping is not
used, which is when domain ID in the AMD IOMMU device table entry (DTE)
is zero.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220713225651.20758-8-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
All drivers that implement get_resv_regions just use
generic_put_resv_regions to implement the put side. Remove the
indirections and document the allocations constraints.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220708080616.238833-4-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Rename 'device_id' as 'sbdf' and extend it to 32bit so that we can
pass PCI segment ID to ppr_notifier(). Also pass PCI segment ID to
pci_get_domain_bus_and_slot() instead of default value.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-36-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Current get_device_id() only provide 16-bit PCI device ID (i.e. BDF).
With multiple PCI segment support, we need to extend the helper function
to include PCI segment ID.
So, introduce a new helper function get_device_sbdf_id() to replace
the current get_pci_device_id().
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-30-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To include a pointer to per PCI segment device table.
Also include struct amd_iommu as one of the function parameter to
amd_iommu_apply_erratum_63() since it is needed when setting up DTE.
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-27-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
