Commit "i2c: cadence: Add standard bus recovery support" breaks for i2c
devices that have no pinctrl defined. There is no requirement for this
to exist in the DT. This has worked perfectly well without this before in
at least 1 real usage case on hardware (Mali Komeda DPU, Cadence i2c to
talk to a tda99xx phy). Adding the requirement to have pinctrl set up in
the device tree (or otherwise be found) is a regression where the whole
i2c device is lost entirely (in this case dropping entire devices which
then leads to the drm display stack unable to find the phy for display
output, thus having no drm display device and so on down the chain).
This converts the above commit to an enhancement if pinctrl can be found
for the i2c device, providing a timeout on read with recovery, but if not,
do what used to be done rather than a fatal loss of a device.
This restores the mentioned display devices to their working state again.
Fixes: 58b924241d ("i2c: cadence: Add standard bus recovery support")
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Reviewed-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Acked-by: Michal Simek <michal.simek@amd.com>
[wsa: added braces to else-branch]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
On my x05 laptop I got:
Memory type 0x12 not supported yet, not instantiating SPD
Adding the 0x12 case lead to a successful instantiated SPD AT24 EEPROM.
i801_smbus 0000:00:1f.3: SMBus using polling
i2c i2c-6: 2/2 memory slots populated (from DMI)
at24 6-0050: 256 byte spd EEPROM, read-only
i2c i2c-6: Successfully instantiated SPD at 0x50
at24 6-0051: 256 byte spd EEPROM, read-only
And then, I decoded it successfully via decode-dimms.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Introduces new helper function to aid in .probe_new() refactors. In order
to use existing i2c_get_device_id() on the probe callback, the device
match table needs to be accessible in that function, which would require
bigger refactors in some drivers using the deprecated .probe callback.
This issue was discussed in more detail in the IIO mailing list.
Link: https://lore.kernel.org/all/20221023132302.911644-11-u.kleine-koenig@pengutronix.de/
Suggested-by: Nuno Sá <noname.nuno@gmail.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
A driver that supports I2C_DRV_ACPI_WAIVE_D0_PROBE is not expected to
power off a device that it has not powered on previously.
For devices operating in "full_power" mode, the first call to
`i2c_acpi_waive_d0_probe` will return 0, which means that the device
will be turned on with `dev_pm_domain_attach`.
If probe fails the second call to `i2c_acpi_waive_d0_probe` will
return 1, which means that the device will not be turned off.
This is, it will be left in a different power state. Lets fix it.
Reviewed-by: Hidenori Kobayashi <hidenorik@chromium.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: stable@vger.kernel.org
Fixes: b18c1ad685 ("i2c: Allow an ACPI driver to manage the device's power state during probe")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This patch adds IRQ support to the PASemi I2C controller driver to
increase the performace of I2C transactions on platforms with PASemi I2C
controllers. While primarily intended for Apple silicon platforms, this
patch should also help in enabling IRQ support for older PASemi hardware
as well should the need arise.
This version of the patch has been tested on an M1 Ultra Mac Studio,
as well as an M1 MacBook Pro, and userspace launches successfully
while using the IRQ path for I2C transactions.
Signed-off-by: Arminder Singh <arminders208@outlook.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
A problem about i2c-npcm7xx create debugfs failed is triggered with the
following log given:
[ 173.827310] debugfs: Directory 'npcm_i2c' with parent '/' already present!
The reason is that npcm_i2c_init() returns platform_driver_register()
directly without checking its return value, if platform_driver_register()
failed, it returns without destroy the newly created debugfs, resulting
the debugfs of npcm_i2c can never be created later.
npcm_i2c_init()
debugfs_create_dir() # create debugfs directory
platform_driver_register()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without destroy debugfs directory
Fix by removing debugfs when platform_driver_register() returns error.
Fixes: 56a1485b10 ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Tali Perry <tali.perry@nuvoton.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
DW_IC_COMP_VERSION register contains the ASCII representation of the
Synopsys component version. Here 0x3131312A == "111*" means version
1.11* required for DW_IC_SDA_HOLD register availability where '*' means
any letter starting from 'a'.
DW_IC_COMP_TYPE is constant and is derived from two ASCII letters "DW"
followed by a 16-bit unsigned number.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Align all defines to the same column.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Commit 90312351fd ("i2c: designware: MASTER mode as separated driver")
introduced disable_int pointer but there is no real use for it. Both
i2c-designware-master.c and i2c-designware-slave.c set it to the same
i2c_dw_disable_int() and scope is inside the same kernel module.
Since i2c_dw_disable_int() is just masking interrupts and the direct
DW_IC_INTR_MASK register write looks more clear in the code use that and
remove it from common code.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In my opinion a few lines of spurious interrupt detection code can be
moved to the actual master interrupt handling function i2c_dw_isr()
without hurting readability.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
It is kind of needless to print interrupt status when code immediately
after that finds interrupt was not originating from this device.
Therefore move it after spurious interrupt detection.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Do not return with interrupt handled if host controller is off and thus
interrupt is originating from other device or is spurious.
Add a check to detect when controller is runtime suspended or
transitioning/reset. In latter case all raw interrupt status register
bits may read one. In both cases return IRQ_NONE to indicate interrupt
was not from this device.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Interrupt processing code in i2c-designware-slave.c is bit more readable
if not divided into another subroutine. Also explicit IRQ_NONE and
IRQ_HANDLED return values are more obvious.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Remove unused completion code from i2c-designware-slave.c. Used only in
i2c-designware-master.c.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
These struct dw_i2c_dev members are not used in i2c-designware-slave.c
so remove re-initialization of them from i2c_dw_reg_slave().
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Define software status flags with a BIT() macro. While at it remove
STATUS_IDLE and replace its use with zero initialization and status
flags clearing with a mask.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Writes from I2C bus often fail when testing the i2c-designware-slave.c
with the slave-eeprom backend. The same writes work correctly when
testing with a real 24c02 EEPROM chip.
In the tests below an i2c-designware-slave.c instance with the
slave-eeprom backend is configured to act as a simulated 24c02 at
address 0x65 on an I2C host bus 6.
1. i2cset -y 6 0x65 0x00 0x55
Single byte 0x55 write into address 0x00. No data goes into simulated
EEPROM. Debug prints from the i2c_dw_irq_handler_slave():
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x714 : INTR_STAT=0x204
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
2. i2ctransfer -y 6 w9@0x65 0x00 0xff-
Write 8 bytes with decrementing value starting from 0xff at address 0x00
and forward. Only some of the data goes into arbitrary addresses.
Content is something like below but varies:
00000000 f9 f8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000050 00 00 00 00 00 00 ff fe 00 00 00 00 00 00 00 00 |................|
000000f0 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fb fa |................|
In this case debug prints were:
0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x714 : INTR_STAT=0x204
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x510 : INTR_STAT=0x0
Both cases show there is more data coming from the receive FIFO still
after detecting the STOP condition. This can be seen from interrupt
status bits DW_IC_INTR_STOP_DET (0x200) and DW_IC_INTR_RX_FULL (0x4).
Perhaps due interrupt latencies the receive FIFO is not read fast
enough, STOP detection happens synchronously when it occurs on the I2C
bus and the DW_IC_INTR_RX_FULL keeps coming as long as there are more
bytes in the receive FIFO.
Fix this by reading the receive FIFO completely empty whenever
DW_IC_INTR_RX_FULL occurs. Use RFNE, Receive FIFO Not Empty bit in the
DW_IC_STATUS register to loop through bytes in the FIFO.
While at it do not test the return code from i2c_slave_event() for the
I2C_SLAVE_WRITE_RECEIVED since to my understanding this hardware cannot
generate NACK to incoming bytes and debug print itself does not have
much value.
Reported-by: Tian Ye <tianye@sugon.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Some read types from I2C bus don't work correctly when testing the
i2c-designware-slave.c with the slave-eeprom backend. The same reads
work correctly when testing with a real 24c02 EEPROM chip.
In the following tests an i2c-designware-slave.c instance with the
slave-eeprom backend is configured to act as a simulated 24c02 at
address 0x65 on an I2C host bus 6:
1. i2cdump -y 6 0x65 b (OK)
Random read. Each byte are read using a byte address write with a
current address read in a same message.
2. i2cdump -y 6 0x65 c (OK, was NOK before commit 3b5f7f10ff when it
was repeating the 1st byte)
Repeated current address read. One byte address write message
followed by repeated current address read messages.
3. i2cdump -y 6 0x65 i (NOK, each 32 byte block repeats the 1st byte of
block)
Sequential read using SMBus Block Read. For each 32 byte block a byte
address write followed by 32 sequental reads in a same message.
These findings are explained because the implementation has had a
mismatch between hardware interrupts and what I2C slave events should be
sent after those interrupts. Despite that the case 1 happened to have
always the I2C slave events sent to a right order with a right data
between backend and the I2C bus.
Hardware generates the DW_IC_INTR_RD_REQ interrupt when another host is
attempting to read and for sequential reads after. DW_IC_INTR_RX_DONE
occurs when host does not acknowledge a transmitted byte which is an
indication the end of transmission.
Those interrupts do not match directly with I2C_SLAVE_READ_REQUESTED and
I2C_SLAVE_READ_PROCESSED events which is how the code was and is
practically using them. The slave-eeprom backend increases the buffer
index with the I2C_SLAVE_READ_PROCESSED event and returns the data from
current index when receiving only the I2C_SLAVE_READ_REQUESTED event.
That explains the repeated bytes in case 3 and also case 2 before
commit 3b5f7f10ff ("i2c: designware: slave should do WRITE_REQUESTED
before WRITE_RECEIVED").
Patch fixes the case 3 while keep cases 1 and 2 working with following
changes:
- First DW_IC_INTR_RD_REQ interrupt will change the state machine to
read in progress state, send I2C_SLAVE_READ_REQUESTED event and
transmit the first byte from backend
- Subsequent DW_IC_INTR_RD_REQ interrupts will send
I2C_SLAVE_READ_PROCESSED events and transmit next bytes from backend
- STOP won't change the state machine. Otherwise case 2 won't work since
we cannot distinguish current address read from sequentiel read
- DW_IC_INTR_RX_DONE interrupt is needless since there is no mechanism
to inform it to a backend. It cannot be used to change state machine
at the end of read either due the same reason than above
- Next host write to us will change the state machine from read to write
in progress state
- STATUS_WRITE_IN_PROGRESS and STATUS_READ_IN_PROGRESS are considered
now to be status flags not the state of the driver. This is how we
treat them in i2c-designware-master.c
While at it do not test the return code from i2c_slave_event() for
I2C_SLAVE_READ_REQUESTED and I2C_SLAVE_READ_PROCESSED since it returns
always 0.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The HiSilicon I2C controller can be used on embedded platform, which
boot from devicetree.
Signed-off-by: Weilong Chen <chenweilong@huawei.com>
Acked-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Dell Vostro 5568 laptop has lis3lv02d, but its i2c address is not known
to the kernel. Add this address.
Output of "cat /sys/devices/platform/lis3lv02d/position" on Dell Vostro
5568 laptop:
- Horizontal: (-18,0,1044)
- Front elevated: (522,-18,1080)
- Left elevated: (-18,-360,1080)
- Upside down: (36,108,-1134)
Signed-off-by: Nam Cao <namcaov@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
To make the code easier to understand, add longer names to the
definitions of register fields. These longer names are based on source
code published by DELL/AESS for WPCM450, but should apply just as well
to NPCM7xx and NPCM8xx.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The unlabelled registers NPCM_I2CCTL4 to NPCM_I2CSCLHT overlap with the
bank 1 registers below, and they are accessed after selecting bank 0, so
they clearly belong to bank 0.
Move them together with the other bank 0 registers, and move the
unrelated definition of npcm_i2caddr down to keep the banked registers
in one piece.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add i2c support for MT7986 SoC.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Use msix or msi interrupts if the hardware supports it. Else, fallback to
legacy interrupts.
Co-developed-by: Basavaraj Natikar <basavaraj.natikar@amd.com>
Signed-off-by: Basavaraj Natikar <basavaraj.natikar@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When the I2C controllers are running in DMA mode, it is the DMA engine
that performs the memory accesses rather than the I2C controller. Pass
the DMA engine's struct device pointer to the DMA API to make sure the
correct DMA operations are used.
This fixes an issue where the DMA engine's SMMU stream ID needs to be
misleadingly set for the I2C controllers in device tree.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In piix4_probe(), the piix4 adapter will be registered in:
piix4_probe()
piix4_add_adapters_sb800() / piix4_add_adapter()
i2c_add_adapter()
Based on the probed device type, piix4_add_adapters_sb800() or single
piix4_add_adapter() will be called.
For the former case, piix4_adapter_count is set as the number of adapters,
while for antoher case it is not set and kept default *zero*.
When piix4 is removed, piix4_remove() removes the adapters added in
piix4_probe(), basing on the piix4_adapter_count value.
Because the count is zero for the single adapter case, the adapter won't
be removed and makes the sources allocated for adapter leaked, such as
the i2c client and device.
These sources can still be accessed by i2c or bus and cause problems.
An easily reproduced case is that if a new adapter is registered, i2c
will get the leaked adapter and try to call smbus_algorithm, which was
already freed:
Triggered by: rmmod i2c_piix4 && modprobe max31730
BUG: unable to handle page fault for address: ffffffffc053d860
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 3752 Comm: modprobe Tainted: G
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:i2c_default_probe (drivers/i2c/i2c-core-base.c:2259) i2c_core
RSP: 0018:ffff888107477710 EFLAGS: 00000246
...
<TASK>
i2c_detect (drivers/i2c/i2c-core-base.c:2302) i2c_core
__process_new_driver (drivers/i2c/i2c-core-base.c:1336) i2c_core
bus_for_each_dev (drivers/base/bus.c:301)
i2c_for_each_dev (drivers/i2c/i2c-core-base.c:1823) i2c_core
i2c_register_driver (drivers/i2c/i2c-core-base.c:1861) i2c_core
do_one_initcall (init/main.c:1296)
do_init_module (kernel/module/main.c:2455)
...
</TASK>
---[ end trace 0000000000000000 ]---
Fix this problem by correctly set piix4_adapter_count as 1 for the
single adapter so it can be normally removed.
Fixes: 528d53a159 ("i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This fixes maybe_unused warnings/errors.
According to a comment during device tree removal, only ACPI is supported,
thus let's actually require it.
Fixes: be18c5ede2 ("i2c: mlxbf: remove device tree support")
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for sis630
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When we compile-in the CCI along with the imx412 driver and run on the RB5
we see that i2c_add_adapter() causes the probe of the imx412 driver to
happen.
This probe tries to perform an i2c xfer() and the xfer() in i2c-qcom-cci.c
fails on pm_runtime_get() because the i2c-qcom-cci.c::probe() function has
not completed to pm_runtime_enable(dev).
Fix this sequence by ensuring pm_runtime_xxx() calls happen prior to adding
the i2c adapter.
Fixes: e517526195 ("i2c: Add Qualcomm CCI I2C driver")
Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The missing "platform" alias is required for the mgb4 v4l2 driver to load
the i2c controller driver when probing the HW.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
- add a new SoC to the qcom-cci driver
- fix an issue with the designware driver which now got enough testing
- the aspeed driver handles now busy target backends better
-----BEGIN PGP SIGNATURE-----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=zzCf
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.1-rc1-batch2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
- correct a variable type in the new pci1xxxx driver
- add a new SoC to the qcom-cci driver
- fix an issue with the designware driver which now got enough testing
- the aspeed driver now handles busy target backends better
* tag 'i2c-for-6.1-rc1-batch2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: aspeed: Assert NAK when slave is busy
i2c: designware: Fix handling of real but unexpected device interrupts
i2c: qcom-cci: Add MSM8226 compatible
dt-bindings: i2c: qcom,i2c-cci: Document clocks for MSM8974
dt-bindings: i2c: qcom,i2c-cci: Document MSM8226 compatible
i2c: microchip: pci1xxxx: Fix comparison of -EPERM against an unsigned variable
- Fix ACPI device object reference counting in (recently updated)
skl_int3472_fill_clk_pdata() (Andy Shevchenko).
- Fix a memory leak in APEI by avoiding to add a task_work to kernel
threads running when an asynchronous error is detected (Shuai Xue).
- Add ACPI support for handling system wakeups via GPIO wake capable
IRQs in addition to GPEs (Raul E Rangel).
- Make the system reboot code put ACPI-enabled systems into the S5
(system off) state which is necessary for some platforms to work as
expected (Kai-Heng Feng).
- Make the white space usage in the ACPI thermal driver more consistent
and drop redundant code from it (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=pwnm
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These fix two issues, in APEI and in the int3472 driver, clean up the
ACPI thermal driver, add ACPI support for non-GPE system wakeup events
and make the system reboot code use the S5 (system off) state by
default.
Specifics:
- Fix ACPI device object reference counting in (recently updated)
skl_int3472_fill_clk_pdata() (Andy Shevchenko).
- Fix a memory leak in APEI by avoiding to add a task_work to kernel
threads running when an asynchronous error is detected (Shuai Xue).
- Add ACPI support for handling system wakeups via GPIO wake capable
IRQs in addition to GPEs (Raul E Rangel).
- Make the system reboot code put ACPI-enabled systems into the S5
(system off) state which is necessary for some platforms to work as
expected (Kai-Heng Feng).
- Make the white space usage in the ACPI thermal driver more
consistent and drop redundant code from it (Rafael Wysocki)"
* tag 'acpi-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: thermal: Drop some redundant code
ACPI: thermal: Drop redundant parens from expressions
ACPI: thermal: Use white space more consistently
platform/x86: int3472: Don't leak reference on error
ACPI: APEI: do not add task_work to kernel thread to avoid memory leak
PM: ACPI: reboot: Reinstate S5 for reboot
kernel/reboot: Add SYS_OFF_MODE_RESTART_PREPARE mode
ACPI: PM: Take wake IRQ into consideration when entering suspend-to-idle
i2c: acpi: Use ACPI wake capability bit to set wake_irq
ACPI: resources: Add wake_capable parameter to acpi_dev_irq_flags
gpiolib: acpi: Add wake_capable variants of acpi_dev_gpio_irq_get
Merge additional APEI changes, ACPI updates related to device wakeup and
system restart and ACPI thermal driver cleanups for 6.1-rc1:
- Fix a memory leak in APEI by avoiding to add do not add task_work to
kernel threads running when an asynchronous error is detected (Shuai
Xue).
- Add ACPI support for handling system wakeups via GPIO wake capable
IRQs in addition to GPEs (Raul E Rangel).
- Make the system reboot code put ACPI-enabled systems into the S5
(system off) state which is necessary for some platforms to work as
expected (Kai-Heng Feng).
- Make the white space usage in the ACPI thermal driver more consistent
and drop redundant code from it (Rafael Wysocki).
* acpi-apei:
ACPI: APEI: do not add task_work to kernel thread to avoid memory leak
* acpi-wakeup:
ACPI: PM: Take wake IRQ into consideration when entering suspend-to-idle
i2c: acpi: Use ACPI wake capability bit to set wake_irq
ACPI: resources: Add wake_capable parameter to acpi_dev_irq_flags
gpiolib: acpi: Add wake_capable variants of acpi_dev_gpio_irq_get
* acpi-reboot:
PM: ACPI: reboot: Reinstate S5 for reboot
kernel/reboot: Add SYS_OFF_MODE_RESTART_PREPARE mode
* acpi-thermal:
ACPI: thermal: Drop some redundant code
ACPI: thermal: Drop redundant parens from expressions
ACPI: thermal: Use white space more consistently
The drivers branch for 6.1 is a bit larger than for most releases. Most
of the changes come from SoC maintainers for the drivers/soc subsystem:
- A new driver for error handling on the NVIDIA Tegra
'control backbone' bus.
- A new driver for Qualcomm LLCC/DDR bandwidth measurement
- New Rockchip rv1126 and rk3588 power domain drivers
- DT binding updates for memory controllers, older Rockchip
SoCs, various Mediatek devices, Qualcomm SCM firmware
- Minor updates to Hisilicon LPC bus, the Allwinner SRAM
driver, the Apple rtkit firmware driver, Tegra firmware
- Minor updates for SoC drivers (Samsung, Mediatek, Renesas,
Tegra, Qualcomm, Broadcom, NXP, ...)
There are also some separate subsystem with downstream maintainers that
merge updates this way:
- Various updates and new drivers in the memory controller
subsystem for Mediatek and Broadcom SoCs
- Small set of changes in preparation to add support for FF-A
v1.1 specification later, in the Arm FF-A firmware subsystem
- debugfs support in the PSCI firmware subsystem
-----BEGIN PGP SIGNATURE-----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=WX9J
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"The drivers branch for 6.1 is a bit larger than for most releases.
Most of the changes come from SoC maintainers for the drivers/soc
subsystem:
- A new driver for error handling on the NVIDIA Tegra 'control
backbone' bus.
- A new driver for Qualcomm LLCC/DDR bandwidth measurement
- New Rockchip rv1126 and rk3588 power domain drivers
- DT binding updates for memory controllers, older Rockchip SoCs,
various Mediatek devices, Qualcomm SCM firmware
- Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the
Apple rtkit firmware driver, Tegra firmware
- Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra,
Qualcomm, Broadcom, NXP, ...)
There are also some separate subsystem with downstream maintainers
that merge updates this way:
- Various updates and new drivers in the memory controller subsystem
for Mediatek and Broadcom SoCs
- Small set of changes in preparation to add support for FF-A v1.1
specification later, in the Arm FF-A firmware subsystem
- debugfs support in the PSCI firmware subsystem"
* tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits)
ARM: remove check for CONFIG_DEBUG_LL_SER3
firmware/psci: Add debugfs support to ease debugging
firmware/psci: Print a warning if PSCI doesn't accept PC mode
dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props
dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros
dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name
dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support
soc: sunxi: sram: Add support for the D1 system control
soc: sunxi: sram: Export the LDO control register
soc: sunxi: sram: Save a pointer to the OF match data
soc: sunxi: sram: Return void from the release function
soc: apple: rtkit: Add apple_rtkit_poll
soc: imx: add i.MX93 media blk ctrl driver
soc: imx: add i.MX93 SRC power domain driver
soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell
soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets
soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl
soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR
soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl
soc: imx: add icc paths for i.MX8MP media blk ctrl
...
On I2C_SLAVE_WRITE_REQUESTED event, Slave already ACK'ed on the address
phase. But as the backend driver is busy and unable to process any
request from Master, issue RxCmdLast for Slave to auto send NACK on
next incoming byte.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Commit c7b79a7528 ("mfd: intel-lpss: Add Intel Alder Lake PCH-S PCI
IDs") caused a regression on certain Gigabyte motherboards for Intel
Alder Lake-S where system crashes to NULL pointer dereference in
i2c_dw_xfer_msg() when system resumes from S3 sleep state ("deep").
I was able to debug the issue on Gigabyte Z690 AORUS ELITE and made
following notes:
- Issue happens when resuming from S3 but not when resuming from
"s2idle"
- PCI device 00:15.0 == i2c_designware.0 is already in D0 state when
system enters into pci_pm_resume_noirq() while all other i2c_designware
PCI devices are in D3. Devices were runtime suspended and in D3 prior
entering into suspend
- Interrupt comes after pci_pm_resume_noirq() when device interrupts are
re-enabled
- According to register dump the interrupt really comes from the
i2c_designware.0. Controller is enabled, I2C target address register
points to a one detectable I2C device address 0x60 and the
DW_IC_RAW_INTR_STAT register START_DET, STOP_DET, ACTIVITY and
TX_EMPTY bits are set indicating completed I2C transaction.
My guess is that the firmware uses this controller to communicate with
an on-board I2C device during resume but does not disable the controller
before giving control to an operating system.
I was told the UEFI update fixes this but never the less it revealed the
driver is not ready to handle TX_EMPTY (or RX_FULL) interrupt when device
is supposed to be idle and state variables are not set (especially the
dev->msgs pointer which may point to NULL or stale old data).
Introduce a new software status flag STATUS_ACTIVE indicating when the
controller is active in driver point of view. Now treat all interrupts
that occur when is not set as unexpected and mask all interrupts from
the controller.
Fixes: c7b79a7528 ("mfd: intel-lpss: Add Intel Alder Lake PCH-S PCI IDs")
Reported-by: Samuel Clark <slc2015@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215907
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add a compatible for MSM8226's Camera Control Interface, which is
similar to the one used on MSM8916.
Signed-off-by: Rayyan Ansari <rayyan@ansari.sh>
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The comparison of variable ret with -EPERM is always false because
ret is an u8 type. Fix this by making ret an int.
Cleans up clang warning:
drivers/i2c/busses/i2c-mchp-pci1xxxx.c:714:10: warning: result of comparison
of constant -1 with expression of type 'u8' (aka 'unsigned char') is always
false [-Wtautological-constant-out-of-range-compare]
Fixes: 3616936972 ("i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
fixes all over the tree. Other subsystems depending on this change
have been asked to pull an immutable topic branch for this.
* new driver for Microchip PCI1xxxx switch
* heavy refactoring of the Mellanox BlueField driver
* we prefer async probe in the i801 driver now
* the rest is usual driver updates (support for more SoCs, some
refactoring, some feature additions)
-----BEGIN PGP SIGNATURE-----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=arni
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- 'remove' callback converted to return void. Big change with trivial
fixes all over the tree. Other subsystems depending on this change
have been asked to pull an immutable topic branch for this.
- new driver for Microchip PCI1xxxx switch
- heavy refactoring of the Mellanox BlueField driver
- we prefer async probe in the i801 driver now
- the rest is usual driver updates (support for more SoCs, some
refactoring, some feature additions)
* tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits)
i2c: pci1xxxx: prevent signed integer overflow
i2c: acpi: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
i2c: i801: Prefer async probe
i2c: designware-pci: Use standard pattern for memory allocation
i2c: designware-pci: Group AMD NAVI quirk parts together
i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch
docs: i2c: slave-interface: return errno when handle I2C_SLAVE_WRITE_REQUESTED
i2c: mlxbf: remove device tree support
i2c: mlxbf: support BlueField-3 SoC
i2c: cadence: Add standard bus recovery support
i2c: mlxbf: add multi slave functionality
i2c: mlxbf: support lock mechanism
macintosh/ams: Adapt declaration of ams_i2c_remove() to earlier change
i2c: riic: Use devm_platform_ioremap_resource()
i2c: mlxbf: remove IRQF_ONESHOT
dt-bindings: i2c: rockchip: add rockchip,rk3128-i2c
dt-bindings: i2c: renesas,rcar-i2c: Add r8a779g0 support
i2c: tegra: Add GPCDMA support
i2c: scmi: Convert to be a platform driver
i2c: rk3x: Add rv1126 support
...
Device tree already has a mechanism to pass the wake_irq. It does this
by looking for the wakeup-source property and setting the
I2C_CLIENT_WAKE flag. This CL adds the ACPI equivalent. It uses the
ACPI interrupt wake flag to determine if the interrupt can be used to
wake the system. Previously the i2c drivers had to make assumptions and
blindly enable the wake IRQ. This can cause spurious wake events. e.g.,
If there is a device with an Active Low interrupt and the device gets
powered off while suspending, the interrupt line will go low since it's
no longer powered and wakes the system. For this reason we should
respect the board designers wishes and honor the wake bit defined on the
interrupt.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Reimplement acpi_get_pci_dev() using the list of physical devices
associated with the given ACPI device object (Rafael Wysocki).
- Rename ACPI device object reference counting functions (Rafael
Wysocki).
- Rearrange ACPI device object initialization code (Rafael Wysocki).
- Drop parent field from struct acpi_device (Rafael Wysocki).
- Extend the the int3472-tps68470 driver to support multiple consumers
of a single TPS68470 along with the requisite framework-level
support (Daniel Scally).
- Filter out non-memory resources in is_memory(), add a helper
function to find all memory type resources of an ACPI device object
and use that function in 3 places (Heikki Krogerus).
- Add IRQ override quirks for Asus Vivobook K3402ZA/K3502ZA and ASUS
model S5402ZA (Tamim Khan, Kellen Renshaw).
- Fix acpi_dev_state_d0() kerneldoc (Sakari Ailus).
- Fix up suspend-to-idle support on ASUS Rembrandt laptops (Mario
Limonciello).
- Clean up ACPI platform devices support code (Andy Shevchenko, John
Garry).
- Clean up ACPI bus management code (Andy Shevchenko, ye xingchen).
- Add support for multiple DMA windows with different offsets to the
ACPI device enumeration code and use it on LoongArch (Jianmin Lv).
- Clean up the ACPI LPSS (Intel SoC) driver (Andy Shevchenko).
- Add a quirk for Dell Inspiron 14 2-in-1 for StorageD3Enable (Mario
Limonciello).
- Drop unused dev_fmt() and redundant 'HMAT' prefix from the HMAT
parsing code (Liu Shixin).
- Make ACPI FPDT parsing code avoid calling acpi_os_map_memory() on
invalid physical addresses (Hans de Goede).
- Silence missing-declarations warning related to Apple device
properties management (Lukas Wunner).
- Disable frequency invariance in the CPPC library if registers used
by cppc_get_perf_ctrs() are accessed via PCC (Jeremy Linton).
- Add ACPI disabled check to acpi_cpc_valid() (Perry Yuan).
- Fix Tx acknowledge in the PCC address space handler (Huisong Li).
- Use wait_for_completion_timeout() for PCC mailbox operations (Huisong
Li).
- Release resources on PCC address space setup failure path (Rafael
Mendonca).
- Remove unneeded result variables from APEI code (ye xingchen).
- Print total number of records found during BERT log parsing (Dmitry
Monakhov).
- Drop support for 3 _OSI strings that should not be necessary any
more and update documentation on custom _OSI strings so that adding
new ones is not encouraged any more (Mario Limonciello).
- Drop unneeded result variable from ec_write() (ye xingchen).
- Remove the leftover struct acpi_ac_bl from the ACPI AC driver (Hanjun
Guo).
- Reorder symbols to get rid of a few forward declarations in the ACPI
fan driver (Uwe Kleine-König).
- Add Toshiba Satellite/Portege Z830 ACPI backlight quirk (Arvid
Norlander).
- Add ARM DMA-330 controller to the supported list in the ACPI AMBA
driver (Vijayenthiran Subramaniam).
- Drop references to non-functional 01.org/linux-acpi web site from
MAINTAINERS and Kconfig help texts (Rafael Wysocki).
- Replace strlcpy() with unused retval with strscpy() in the ACPI
support code (Wolfram Sang).
- Do not initialize ret in main() in the pfrut utility (Shi junming).
- Drop useless ACPI DSDT override documentation (Rafael Wysocki).
- Fix a few typos and wording mistakes in the ACPI device enumeration
documentation (Jean Delvare).
- Introduce acpi_dev_uid_to_integer() to convert a _UID string into an
integer value (Andy Shevchenko).
- Use acpi_dev_uid_to_integer() in several places to unify _UID
handling (Andy Shevchenko).
- Drop unused pnpid32_to_pnpid() declaration from PNP code (Gaosheng
Cui).
-----BEGIN PGP SIGNATURE-----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=xyUK
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"ACPI and PNP updates for 6.1-rc1.
These rearrange the ACPI device object initialization code (to get rid
of a redundant parent pointer from struct acpi_device among other
things), unify the _UID handling, drop support for some _OSI strings
that should not be necessary any more, add new IDs to support more
hardware and some more quirks, fix a few issues and clean up code all
over.
Specifics:
- Reimplement acpi_get_pci_dev() using the list of physical devices
associated with the given ACPI device object (Rafael Wysocki)
- Rename ACPI device object reference counting functions (Rafael
Wysocki)
- Rearrange ACPI device object initialization code (Rafael Wysocki)
- Drop parent field from struct acpi_device (Rafael Wysocki)
- Extend the the int3472-tps68470 driver to support multiple
consumers of a single TPS68470 along with the requisite
framework-level support (Daniel Scally)
- Filter out non-memory resources in is_memory(), add a helper
function to find all memory type resources of an ACPI device object
and use that function in 3 places (Heikki Krogerus)
- Add IRQ override quirks for Asus Vivobook K3402ZA/K3502ZA and ASUS
model S5402ZA (Tamim Khan, Kellen Renshaw)
- Fix acpi_dev_state_d0() kerneldoc (Sakari Ailus)
- Fix up suspend-to-idle support on ASUS Rembrandt laptops (Mario
Limonciello)
- Clean up ACPI platform devices support code (Andy Shevchenko, John
Garry)
- Clean up ACPI bus management code (Andy Shevchenko, ye xingchen)
- Add support for multiple DMA windows with different offsets to the
ACPI device enumeration code and use it on LoongArch (Jianmin Lv)
- Clean up the ACPI LPSS (Intel SoC) driver (Andy Shevchenko)
- Add a quirk for Dell Inspiron 14 2-in-1 for StorageD3Enable (Mario
Limonciello)
- Drop unused dev_fmt() and redundant 'HMAT' prefix from the HMAT
parsing code (Liu Shixin)
- Make ACPI FPDT parsing code avoid calling acpi_os_map_memory() on
invalid physical addresses (Hans de Goede)
- Silence missing-declarations warning related to Apple device
properties management (Lukas Wunner)
- Disable frequency invariance in the CPPC library if registers used
by cppc_get_perf_ctrs() are accessed via PCC (Jeremy Linton)
- Add ACPI disabled check to acpi_cpc_valid() (Perry Yuan)
- Fix Tx acknowledge in the PCC address space handler (Huisong Li)
- Use wait_for_completion_timeout() for PCC mailbox operations
(Huisong Li)
- Release resources on PCC address space setup failure path (Rafael
Mendonca)
- Remove unneeded result variables from APEI code (ye xingchen)
- Print total number of records found during BERT log parsing (Dmitry
Monakhov)
- Drop support for 3 _OSI strings that should not be necessary any
more and update documentation on custom _OSI strings so that adding
new ones is not encouraged any more (Mario Limonciello)
- Drop unneeded result variable from ec_write() (ye xingchen)
- Remove the leftover struct acpi_ac_bl from the ACPI AC driver
(Hanjun Guo)
- Reorder symbols to get rid of a few forward declarations in the
ACPI fan driver (Uwe Kleine-König)
- Add Toshiba Satellite/Portege Z830 ACPI backlight quirk (Arvid
Norlander)
- Add ARM DMA-330 controller to the supported list in the ACPI AMBA
driver (Vijayenthiran Subramaniam)
- Drop references to non-functional 01.org/linux-acpi web site from
MAINTAINERS and Kconfig help texts (Rafael Wysocki)
- Replace strlcpy() with unused retval with strscpy() in the ACPI
support code (Wolfram Sang)
- Do not initialize ret in main() in the pfrut utility (Shi junming)
- Drop useless ACPI DSDT override documentation (Rafael Wysocki)
- Fix a few typos and wording mistakes in the ACPI device enumeration
documentation (Jean Delvare)
- Introduce acpi_dev_uid_to_integer() to convert a _UID string into
an integer value (Andy Shevchenko)
- Use acpi_dev_uid_to_integer() in several places to unify _UID
handling (Andy Shevchenko)
- Drop unused pnpid32_to_pnpid() declaration from PNP code (Gaosheng
Cui)"
* tag 'acpi-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (79 commits)
ACPI: LPSS: Deduplicate skipping device in acpi_lpss_create_device()
ACPI: LPSS: Replace loop with first entry retrieval
ACPI: x86: s2idle: Add another ID to s2idle_dmi_table
ACPI: x86: s2idle: Fix a NULL pointer dereference
MAINTAINERS: Drop records pointing to 01.org/linux-acpi
ACPI: Kconfig: Drop link to https://01.org/linux-acpi
ACPI: docs: Drop useless DSDT override documentation
ACPI: DPTF: Drop stale link from Kconfig help
ACPI: x86: s2idle: Add a quirk for ASUSTeK COMPUTER INC. ROG Flow X13
ACPI: x86: s2idle: Add a quirk for Lenovo Slim 7 Pro 14ARH7
ACPI: x86: s2idle: Add a quirk for ASUS ROG Zephyrus G14
ACPI: x86: s2idle: Add a quirk for ASUS TUF Gaming A17 FA707RE
ACPI: x86: s2idle: Add module parameter to prefer Microsoft GUID
ACPI: x86: s2idle: If a new AMD _HID is missing assume Rembrandt
ACPI: x86: s2idle: Move _HID handling for AMD systems into structures
platform/x86: int3472: Add board data for Surface Go2 IR camera
platform/x86: int3472: Support multiple gpio lookups in board data
platform/x86: int3472: Support multiple clock consumers
ACPI: bus: Add iterator for dependent devices
ACPI: scan: Add acpi_dev_get_next_consumer_dev()
...
Some constants need 'UL' markings, otherwise they are shifted into the
sign bit.
Fixes: 3616936972 ("i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch")
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Zero-length arrays are deprecated and we are moving towards adopting
C99 flexible-array members, instead. So, replace zero-length arrays
declarations in anonymous union with the new DECLARE_FLEX_ARRAY()
helper macro.
This helper allows for flexible-array members in unions.
Link: https://github.com/KSPP/linux/issues/193
Link: https://github.com/KSPP/linux/issues/218
Link: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This i801 driver probe can take more than ~190ms in some devices, since
the "i2c_register_spd()" call was added inside
"i801_probe_optional_slaves()".
Prefer async probe so that other drivers can be probed and boot can
continue in parallel while this driver loads, to reduce boot time. There is
no reason to block other drivers from probing while this driver is
loading.
Signed-off-by: Mani Milani <mani@chromium.org>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The pm_runtime_enable will increase power disable depth. Thus a
pairing decrement is needed on the error handling path to keep
it balanced according to context.
Fixes: 17f88151ff ("i2c: davinci: Add PM Runtime Support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The pattern
foo = kmalloc(sizeof(*foo), GFP_KERNEL);
has an advantage when foo type is changed. Since we are planning a such,
better to be prepared by using standard pattern for memory allocation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The code is ogranized in a way that all related parts
to the certain platform quirk go together. This is not
the case for AMD NAVI. Shuffle code to make it happen.
While at it, drop the frequency definition and use
hard coded value as it's done for other platforms and
add a comment to the PCI ID list.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Microchip pci1xxxx is an unmanaged PCIe3.1a Switch for Consumer,
Industrial and Automotive applications. This switch has multiple
downstream ports. In one of the Switch's Downstream port, there
is a multifunction endpoint for peripherals which includes an I2C
host controller. The I2C function in the endpoint operates at 100KHz,
400KHz and 1 MHz and has buffer depth of 128 bytes.
This patch provides the I2C controller driver for the I2C function
of the switch.
Signed-off-by: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
BlueField customers have to use the BlueField firmware with
UEFI ACPI tables so there is no need to have device tree
support in the i2c-mlxbf.c driver. Remove the device tree
binding documentation as well.
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
BlueField-3 SoC has the same I2C IP logic as previous
BlueField-1 and 2 SoCs but it has different registers' addresses.
This is an effort to keep this driver generic across all
BlueField generations.
This patch breaks down the "smbus" resource into 3 separate
resources to enable us to use common registers' offsets for all
BlueField SoCs:
struct mlxbf_i2c_resource *timer;
struct mlxbf_i2c_resource *mst;
struct mlxbf_i2c_resource *slv;
Of course, all offsets had to be adjusted accordingly, and we took
this chance to reorganize the macros depending on the register block
they target.
There are only 2 registers' offsets that do not fit within this
schema so their offsets are passed as SoC-specific parameters:
smbus_master_rs_bytes_off
smbus_master_fsm_off
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Hook up the standard GPIO/pinctrl-based recovery support.
We are doing the recovery at the beginning on a timeout.
Multiple people have contributed to the series.
Original patch from Cirag and another one from Robert.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Support the multi slave functionality which enables the BlueField
to be registered at up to 16 i2c slave addresses.
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Linux is not the only entity using the BlueField I2C busses so
support a lock mechanism provided by hardware to avoid issues
when multiple entities are trying to access the same bus.
The lock is acquired whenever written explicitely or the lock
register is read. So make sure it is always released at the end
of a successful or failed transaction.
Fixes: b5b5b32081 (i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC)
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
A couple years back we went through the kernel an automatically
converted size calculations to use struct_size() instead. The
struct_size() calculation is protected against integer overflows.
However it does not make sense to use the result from struct_size()
for additional math operations as that would negate any safeness.
Fixes: 1f3b69b6b9 ("i2c: mux: Use struct_size() in devm_kzalloc()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The i2c-mlxbf.c driver is currently broken because there is a bug
in the calculation of the frequency. core_f, core_r and core_od
are components read from hardware registers and are used to
compute the frequency used to compute different timing parameters.
The shifting mechanism used to get core_f, core_r and core_od is
wrong. Use FIELD_GET to mask and shift the bitfields properly.
Fixes: b5b5b32081 (i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC)
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
ACPI utils provide acpi_dev_uid_to_integer() helper to extract _UID as
an integer. Use it instead of custom approach.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI utils provide acpi_dev_uid_to_integer() helper to extract _UID as
an integer. Use it instead of custom approach.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use the devm_platform_ioremap_resource() helper instead of calling
platform_get_resource() and devm_ioremap_resource() separately.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
IRQF_ONESHOT is not needed so remove it.
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
memcpy() is called in a loop while 'operation->length' upper bound
is not checked and 'data_idx' also increments.
Fixes: b5b5b32081 ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC")
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Correct the base address used during io write.
This bug had no impact over the overall functionality of the read and write
transactions. MLXBF_I2C_CAUSE_OR_CLEAR=0x18 so writing to (smbus->io + 0x18)
instead of (mst_cause->ioi + 0x18) actually writes to the sc_low_timeout
register which just sets the timeout value before a read/write aborts.
Fixes: b5b5b32081 (i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC)
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Enable support for GPCDMA, which is used in I2C controllers
in Tegra 186 and above. The chips before that used APB DMA.
This change works under the presumption that all chips apart from
those supporting APB DMA is using GPCDMA.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
ACPI core in conjunction with platform driver core provides
an infrastructure to enumerate ACPI devices. Use it in order
to remove a lot of boilerplate code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Josef Johansson <josef@oderland.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
pm_runtime_get_sync() returning 1 also means the device is powered. So
resetting the chip registers in .remove() is possible and should be
done.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: d98bdd3a5b ("i2c: imx: Make sure to unregister adapter on remove()")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add i2c support for Rockchip RV1126 SoC.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
6.1, please pull the following:
- Guilherme adds a comment to the panic notifier, part of his big panic
notifier rework series
- William migrates all of ARCH_BCM4908 dependencies to ARCH_BCMBCA
-----BEGIN PGP SIGNATURE-----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=eiuT
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=7IUk
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.1/drivers' of https://github.com/Broadcom/stblinux into arm/drivers
This pull request contains Broadcom ARM/ARM64 SoC drivers updates for
6.1, please pull the following:
- Guilherme adds a comment to the panic notifier, part of his big panic
notifier rework series
- William migrates all of ARCH_BCM4908 dependencies to ARCH_BCMBCA
* tag 'arm-soc/for-6.1/drivers' of https://github.com/Broadcom/stblinux:
arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
soc: bcm: brcmstb: Document panic notifier action and remove useless header
Link: https://lore.kernel.org/r/20220915023044.2350782-4-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Similar to I2C designware platform driver add i2c_parse_fw_timings() in
PCI driver, to get I2C related timing parameters from firmware.
Signed-off-by: Sudarshan Ravula <sudarshan.ravula@intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The current driver only support one clock, however LPI2C requires
two clocks: PER and IPG.
To make sure old dts could work with newer kernel, use bulk clk
API.
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Since commit 0166dc11be ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
It is actually better to always build such drivers with OF enabled,
so that the test builds are closer to how each driver will actually be
built on its intended target. Building them without OF may not test
much as the compiler will optimize out potentially large parts of the
code. In the worst case, this could even pop false positive warnings.
Dropping COMPILE_TEST here improves the quality of our testing and
avoids wasting time on non-existent issues.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
If for whatever reasons pm_runtime_resume_and_get() fails and .remove() is
exited early, the i2c adapter stays around and the irq still calls its
handler, while the driver data and the register mapping go away. So if
later the i2c adapter is accessed or the irq triggers this results in
havoc accessing freed memory and unmapped registers.
So unregister the software resources even if resume failed, and only skip
the hardware access in that case.
Fixes: 588eb93ea4 ("i2c: imx: add runtime pm support to improve the performance")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
As stated in [1], dma_set_mask() with a 64-bit mask never fails if
dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.
Simplify code and remove some dead code accordingly.
[1]: https://lkml.org/lkml/2021/6/7/398
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In order to optimize performance, limit amount of back and forth
transactions between x86 and PSP. This is done by introduction of
semaphore reservation period - that is window in which x86 isn't
releasing the bus immediately after each I2C transaction.
In order to protect PSP from being starved while waiting for
arbitration, after a programmed time bus is automatically released by a
deferred function.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
[wsa: removed an unneeded empty line]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
With Broadcom Broadband arch ARCH_BCMBCA supported in the kernel, this
patch series migrate the ARCH_BCM4908 symbol to ARCH_BCMBCA. Hence
replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Guenter Roeck <linux@roeck-us.net> (for watchdog)
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci)
Acked-by: Wolfram Sang <wsa@kernel.org> (for i2c)
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> (for reset)
Link: https://lore.kernel.org/r/20220803175455.47638-7-william.zhang@broadcom.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Follow the advice of the below link and prefer 'strscpy'. Conversion is
easy because no driver used the return value and has been done with a
simple sed invocation.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Adds an ACPI companion to the KEMPLD I2C driver so that it correctly
detects any I2C devices nested under the KEMPLD's ACPI node (SBRG.CPLD).
This allows I2C devices attached to the KEMPLD I2C adapter to be declared
and instantiated via ACPI.
Signed-off-by: Chris Pringle <chris.pringle@phabrix.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add i2c compatible for MT8188 and added mt_i2c_regs_v3[], since
MT8188 i2c OFFSET_SLAVE_ADDR register changed from 0x04 to 0x94.
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
A late ack is currently being sent at the end of a transfer due to
incorrect logic in mchp_corei2c_empty_rx(). Currently the Assert Ack
bit is being written to the controller's control reg after the last
byte has been received, causing it to sent another byte with the ack.
Instead, the AA flag should be written to the control register when
the penultimate byte is read so it is sent out for the last byte.
Reported-by: Andreas Buerkler <andreas.buerkler@enclustra.com>
Fixes: 64a6f1c498 ("i2c: add support for microchip fpga i2c controllers")
Tested-by: Lewis Hanly <lewis.hanly@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
[wsa: fixed typos in commit message]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fix i2c transfers using GPI DMA mode for all message types that do not set
the I2C_M_DMA_SAFE flag (e.g. SMBus "read byte").
In this case a bounce buffer is returned by i2c_get_dma_safe_msg_buf(),
and it has to synced back to the message after the transfer is done.
Add missing assignment of dma buffer in geni_i2c_gpi().
Set xferred in i2c_put_dma_safe_msg_buf() to true in case of no error to
ensure the sync-back of this dma buffer to the message.
Fixes: d8703554f4 ("i2c: qcom-geni: Add support for GPI DMA")
Signed-off-by: Robin Reckmann <robin.reckmann@gmail.com>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Tested-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
- Add support for syscall stack randomization.
- Add support for atomic operations to the 32 & 64-bit BPF JIT.
- Full support for KASAN on 64-bit Book3E.
- Add a watchdog driver for the new PowerVM hypervisor watchdog.
- Add a number of new selftests for the Power10 PMU support.
- Add a driver for the PowerVM Platform KeyStore.
- Increase the NMI watchdog timeout during live partition migration, to avoid timeouts
due to increased memory access latency.
- Add support for using the 'linux,pci-domain' device tree property for PCI domain
assignment.
- Many other small features and fixes.
Thanks to: Alexey Kardashevskiy, Andy Shevchenko, Arnd Bergmann, Athira Rajeev, Bagas
Sanjaya, Christophe Leroy, Erhard Furtner, Fabiano Rosas, Greg Kroah-Hartman, Greg Kurz,
Haowen Bai, Hari Bathini, Jason A. Donenfeld, Jason Wang, Jiang Jian, Joel Stanley, Juerg
Haefliger, Kajol Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Masahiro Yamada,
Maxime Bizon, Miaoqian Lin, Murilo Opsfelder Araújo, Nathan Lynch, Naveen N. Rao, Nayna
Jain, Nicholas Piggin, Ning Qiang, Pali Rohár, Petr Mladek, Rashmica Gupta, Sachin Sant,
Scott Cheloha, Segher Boessenkool, Stephen Rothwell, Uwe Kleine-König, Wolfram Sang, Xiu
Jianfeng, Zhouyi Zhou.
-----BEGIN PGP SIGNATURE-----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=tRkm
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for syscall stack randomization
- Add support for atomic operations to the 32 & 64-bit BPF JIT
- Full support for KASAN on 64-bit Book3E
- Add a watchdog driver for the new PowerVM hypervisor watchdog
- Add a number of new selftests for the Power10 PMU support
- Add a driver for the PowerVM Platform KeyStore
- Increase the NMI watchdog timeout during live partition migration, to
avoid timeouts due to increased memory access latency
- Add support for using the 'linux,pci-domain' device tree property for
PCI domain assignment
- Many other small features and fixes
Thanks to Alexey Kardashevskiy, Andy Shevchenko, Arnd Bergmann, Athira
Rajeev, Bagas Sanjaya, Christophe Leroy, Erhard Furtner, Fabiano Rosas,
Greg Kroah-Hartman, Greg Kurz, Haowen Bai, Hari Bathini, Jason A.
Donenfeld, Jason Wang, Jiang Jian, Joel Stanley, Juerg Haefliger, Kajol
Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Masahiro Yamada,
Maxime Bizon, Miaoqian Lin, Murilo Opsfelder Araújo, Nathan Lynch,
Naveen N. Rao, Nayna Jain, Nicholas Piggin, Ning Qiang, Pali Rohár,
Petr Mladek, Rashmica Gupta, Sachin Sant, Scott Cheloha, Segher
Boessenkool, Stephen Rothwell, Uwe Kleine-König, Wolfram Sang, Xiu
Jianfeng, and Zhouyi Zhou.
* tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (191 commits)
powerpc/64e: Fix kexec build error
EDAC/ppc_4xx: Include required of_irq header directly
powerpc/pci: Fix PHB numbering when using opal-phbid
powerpc/64: Init jump labels before parse_early_param()
selftests/powerpc: Avoid GCC 12 uninitialised variable warning
powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address
powerpc/xive: Fix refcount leak in xive_get_max_prio
powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader
powerpc/perf: Include caps feature for power10 DD1 version
powerpc: add support for syscall stack randomization
powerpc: Move system_call_exception() to syscall.c
powerpc/powernv: rename remaining rng powernv_ functions to pnv_
powerpc/powernv/kvm: Use darn for H_RANDOM on Power9
powerpc/powernv: Avoid crashing if rng is NULL
selftests/powerpc: Fix matrix multiply assist test
powerpc/signal: Update comment for clarity
powerpc: make facility_unavailable_exception 64s
powerpc/platforms/83xx/suspend: Remove write-only global variable
powerpc/platforms/83xx/suspend: Prevent unloading the driver
powerpc/platforms/83xx/suspend: Reorder to get rid of a forward declaration
...
Highlights:
- Microsoft Surface:
- SSAM hot unplug support
- Surface Pro 8 keyboard cover support
- Tablet mode switch support for Surface Pro 8 and Surface Laptop Studio
- thinkpad_acpi: AMD Automatice Mode Transitions (AMT) support
- Mellanox:
- Vulcan chassis COMe NVSwitch management support
- XH3000 support
- New generic/shared Intel P2SB (Primary to Sideband) support
- Lots of small cleanups
- Various small bugfixes
- Various new hardware ids / quirks additions
The following is an automated git shortlog grouped by driver:
ACPI:
- video: Fix acpi_video_handles_brightness_key_presses()
- video: Change how we determine if brightness key-presses are handled
Documentation/ABI:
- Add new attributes for mlxreg-io sysfs interfaces
- mlxreg-io: Fix contact info
Drop the PMC_ATOM Kconfig option:
- Drop the PMC_ATOM Kconfig option
EDAC, pnd2:
- convert to use common P2SB accessor
- Use proper I/O accessors and address space annotation
HID:
- surface-hid: Add support for hot-removal
ISST:
- PUNIT device mapping with Sub-NUMA clustering
Kconfig:
- Remove unnecessary "if X86"
MAINTAINERS:
- repair file entry in MICROSOFT SURFACE AGGREGATOR TABLET-MODE SWITCH
Merge tag 'ib-mfd-edac-i2c-leds-pinctrl-platform-watchdog-v5.20' into review-hans:
- Merge tag 'ib-mfd-edac-i2c-leds-pinctrl-platform-watchdog-v5.20' into review-hans
Move AMD platform drivers to separate directory:
- Move AMD platform drivers to separate directory
acer-wmi:
- Use backlight helper
acer_wmi:
- Cleanup Kconfig selects
apple-gmux:
- Use backlight helper
asus-wmi:
- Add mic-mute LED classdev support
- Add key mappings
compal-laptop:
- Use backlight helper
efi:
- Fix efi_power_off() not being run before acpi_power_off() when necessary
gigabyte-wmi:
- add support for B660I AORUS PRO DDR4
hp-wmi:
- Ignore Sanitization Mode event
i2c:
- i801: convert to use common P2SB accessor
ideapad-laptop:
- Add Ideapad 5 15ITL05 to ideapad_dytc_v4_allow_table[]
- Add allow_v4_dytc module parameter
intel/pmc:
- Add Alder Lake N support to PMC core driver
intel_atomisp2_led:
- Also turn off the always-on camera LED on the Asus T100TAF
leds:
- simatic-ipc-leds-gpio: Add GPIO version of Siemens driver
- simatic-ipc-leds: Convert to use P2SB accessor
mfd:
- lpc_ich: Add support for pinctrl in non-ACPI system
- lpc_ich: Switch to generic p2sb_bar()
- lpc_ich: Factor out lpc_ich_enable_spi_write()
mlx-platform:
- Add COME board revision register
- Add support for new system XH3000
- Introduce support for COMe NVSwitch management module for Vulcan chassis
- Add support for systems equipped with two ASICs
- Add cosmetic changes for alignment
- Make activation of some drivers conditional
p2sb:
- Move out of X86_PLATFORM_DEVICES dependency
panasonic-laptop:
- Use acpi_video_get_backlight_type()
- filter out duplicate volume up/down/mute keypresses
- don't report duplicate brightness key-presses
- revert "Resolve hotkey double trigger bug"
- sort includes alphabetically
- de-obfuscate button codes
pinctrl:
- intel: Check against matching data instead of ACPI companion
platform/mellanox:
- mlxreg-lc: Fix error flow and extend verbosity
- mlxreg-io: Add locking for io operations
- nvsw-sn2201: fix error code in nvsw_sn2201_create_static_devices()
platform/olpc:
- Fix uninitialized data in debugfs write
platform/surface:
- gpe: Add support for 13" Intel version of Surface Laptop 4
- tabletsw: Fix __le32 integer access
- Update copyright year of various drivers
- aggregator: Move subsystem hub drivers to their own module
- aggregator: Move device registry helper functions to core module
- aggregator_registry: Add support for tablet mode switch on Surface Laptop Studio
- aggregator_registry: Add support for tablet mode switch on Surface Pro 8
- Add KIP/POS tablet-mode switch driver
- aggregator: Add helper macros for requests with argument and return value
- aggregator: Reserve more event- and target-categories
- avoid flush_scheduled_work() usage
- aggregator_registry: Add support for keyboard cover on Surface Pro 8
- aggregator_registry: Add KIP device hub
- aggregator_registry: Change device ID for base hub
- aggregator_registry: Generify subsystem hub functionality
- aggregator: Add comment for KIP subsystem category
- aggregator_registry: Use client device wrappers for notifier registration
- aggregator: Allow notifiers to avoid communication on unregistering
- aggregator: Allow devices to be marked as hot-removed
- aggregator: Allow is_ssam_device() to be used when CONFIG_SURFACE_AGGREGATOR_BUS is disabled
platform/x86/amd/pmc:
- Add new platform support
- Add new acpi id for PMC controller
platform/x86/dell:
- Kconfig: Remove unnecessary "depends on X86_PLATFORM_DEVICES"
platform/x86/intel:
- Add Primary to Sideband (P2SB) bridge support
platform/x86/intel/ifs:
- Mark as BROKEN
platform/x86/intel/pmt:
- telemetry: Fix fixed region handling
platform/x86/intel/vsec:
- Fix wrong type for local status variables
- Add PCI error recovery support to Intel PMT
- Add support for Raptor Lake
- Rework early hardware code
pmc_atom:
- Fix comment typo
- Match all Lex BayTrail boards with critclk_systems DMI table
power/supply:
- surface_battery: Use client device wrappers for notifier registration
- surface_charger: Use client device wrappers for notifier registration
serial-multi-instantiate:
- Sort ACPI IDs by HID
- Get rid of redundant 'else'
- Use while (i--) pattern to clean up
- Improve dev_err_probe() messaging
- Drop duplicate check
- Improve autodetection
simatic-ipc:
- drop custom P2SB bar code
sony-laptop:
- Remove useless comparisons in sony_pic_read_possible_resource()
system76_acpi:
- Use dev_get_drvdata
thinkpad_acpi:
- Enable AMT by default on supported systems
- Add support for hotkey 0x131a
- Add support for automatic mode transitions
- profile capabilities as integer
- do not use PSC mode on Intel platforms
- Fix a memory leak of EFCH MMIO resource
- Replace custom str_on_off() etc
- Sort headers for better maintenance
- Use backlight helper
tools/power/x86/intel-speed-select:
- Remove unneeded semicolon
- Fix off by one check
watchdog:
- simatic-ipc-wdt: convert to use P2SB accessor
x86-android-tablets:
- Fix Lenovo Yoga Tablet 2 830/1050 poweroff again
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmLrndEUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zeMgf7BjSCz6ZA8SSY1i8QHDTvdjySihHJ
j07Gn3j1T/5G00R/r6viMDE4PxcYvMAPXjq3azepKQd8H5kGfE323SA6fgWFPAvi
P2OvEfvWfI5S8FYGYPBkNP2MjQ5MFe7qzLEh3+wQH0ocJ7WRCi457B4Xvtd2gWI3
dHj5gMSWC3O5xNa2S4Mg3dnD9uJlwhX+FNjWIuRy8eh5+DikgByyC4B+uW6WtO5e
t0rmIm6q5wUzB7dIetJLoAQwrcpYAOkK7L33G9h/7knWAfiJfklaKTbftnoxbDSv
iGWODkLDyob4C48DmVusS6WMEhPUzl/R33+tk6LjVt/YOYOP030EMtCECQ==
=Krhc
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- Microsoft Surface:
- SSAM hot unplug support
- Surface Pro 8 keyboard cover support
- Tablet mode switch support for Surface Pro 8 and Surface Laptop
Studio
- thinkpad_acpi:
- AMD Automatice Mode Transitions (AMT) support
- Mellanox:
- Vulcan chassis COMe NVSwitch management support
- XH3000 support
- New generic/shared Intel P2SB (Primary to Sideband) support
- Lots of small cleanups
- Various small bugfixes
- Various new hardware ids / quirks additions
* tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (105 commits)
platform/x86/intel/vsec: Fix wrong type for local status variables
platform/x86: p2sb: Move out of X86_PLATFORM_DEVICES dependency
platform/x86: pmc_atom: Fix comment typo
platform/surface: gpe: Add support for 13" Intel version of Surface Laptop 4
platform/olpc: Fix uninitialized data in debugfs write
platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity
platform/x86: pmc_atom: Match all Lex BayTrail boards with critclk_systems DMI table
platform/x86: sony-laptop: Remove useless comparisons in sony_pic_read_possible_resource()
tools/power/x86/intel-speed-select: Remove unneeded semicolon
tools/power/x86/intel-speed-select: Fix off by one check
platform/surface: tabletsw: Fix __le32 integer access
Documentation/ABI: Add new attributes for mlxreg-io sysfs interfaces
Documentation/ABI: mlxreg-io: Fix contact info
platform/mellanox: mlxreg-io: Add locking for io operations
platform/x86: mlx-platform: Add COME board revision register
platform/x86: mlx-platform: Add support for new system XH3000
platform/x86: mlx-platform: Introduce support for COMe NVSwitch management module for Vulcan chassis
platform/x86: mlx-platform: Add support for systems equipped with two ASICs
platform/x86: mlx-platform: Add cosmetic changes for alignment
platform/x86: mlx-platform: Make activation of some drivers conditional
...
Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text. Also included in here are a few other minor updates,
2 USB files, and one Documentation file update to get the SPDX lines
correct.
All of these have been in the linux-next tree for a very long time.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYupz3g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynPUgCgslaf2ssCgW5IeuXbhla+ZBRAzisAnjVgOvLN
4AKdqbiBNlFbCroQwmeQ
=v1sg
-----END PGP SIGNATURE-----
Merge tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text.
Also included in here are a few other minor updates, two USB files,
and one Documentation file update to get the SPDX lines correct.
All of these have been in the linux-next tree for a very long time"
* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
Documentation: samsung-s3c24xx: Add blank line after SPDX directive
x86/crypto: Remove stray comment terminator
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
...
- quite some DT schema conversions and extensions
- and a bunch of driver updates and improvements
-----BEGIN PGP SIGNATURE-----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=6fXH
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- new drivers: Microchip CoreI2C, Renesas RZV2M
- quite some DT schema conversions and extensions
- and a bunch of driver updates and improvements
* tag 'i2c-for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits)
i2c: extend documentation about retvals of master_xfer functions
i2c: mux-gpmux: Add of_node_put() when breaking out of loop
dt-bindings: i2c: i2c-rk3x: Document Rockchip RV1126
i2c: qcom-geni: Use the correct return value
i2c: cadence: Support PEC for SMBus block read
i2c: qcom-geni: Propagate GENI_ABORT_DONE to geni_i2c_abort_xfer()
i2c: brcmstb: Use dev_name() for adapter name
i2c: Add Renesas RZ/V2M controller
dt-bindings: i2c: Document RZ/V2M I2C controller
i2c: mlxcpld: Add callback to notify probing completion
i2c: scmi: Replace open coded device_get_match_data()
i2c: stm32: add support for the STM32MP13 soc
dt-bindings: i2c: st,stm32-i2c: add entry for stm32mp13
dt-bindings: i2c: i2c-rk3x: add rk3588 compatible
i2c: add support for microchip fpga i2c controllers
i2c: i801: Add support for Intel Meteor Lake-P
dt-bindings: i2c: nomadik: Add power domain to binding
dt-bindings: i2c: nomadik: Drop unused voltage supply from example
i2c: Fix a potential use after free
i2c: hisi: use HZ_PER_KHZ macro in units.h
...
The SoC driver updates contain changes to improve support for
additional SoC variants, as well as cleanups an minor bugfixes
in a number of existing drivers.
Notable updates this time include:
- Support for Qualcomm MSM8909 (Snapdragon 210) in various drivers
- Updates for interconnect drivers on Qualcomm Snapdragon
- A new driver support for NMI interrupts on Fujitsu A64fx
- A rework of Broadcom BCMBCA Kconfig dependencies
- Improved support for BCM2711 (Raspberry Pi 4) power management
to allow the use of the V3D GPU
- Cleanups to the NXP guts driver
- Arm SCMI firmware driver updates to add tracing support, and
use the firmware interfaces for system power control and for
power capping.
-----BEGIN PGP SIGNATURE-----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=0dZI
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC drivers from Arnd Bergmann:
"The SoC driver updates contain changes to improve support for
additional SoC variants, as well as cleanups an minor bugfixes
in a number of existing drivers.
Notable updates this time include:
- Support for Qualcomm MSM8909 (Snapdragon 210) in various drivers
- Updates for interconnect drivers on Qualcomm Snapdragon
- A new driver support for NMI interrupts on Fujitsu A64fx
- A rework of Broadcom BCMBCA Kconfig dependencies
- Improved support for BCM2711 (Raspberry Pi 4) power management to
allow the use of the V3D GPU
- Cleanups to the NXP guts driver
- Arm SCMI firmware driver updates to add tracing support, and use
the firmware interfaces for system power control and for power
capping"
* tag 'arm-drivers-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (125 commits)
soc: a64fx-diag: disable modular build
dt-bindings: soc: qcom: qcom,smd-rpm: add power-controller
dt-bindings: soc: qcom: aoss: document qcom,sm8450-aoss-qmp
dt-bindings: soc: qcom,rpmh-rsc: simplify qcom,tcs-config
ARM: mach-qcom: Add support for MSM8909
dt-bindings: arm: cpus: Document "qcom,msm8909-smp" enable-method
soc: qcom: spm: Add CPU data for MSM8909
dt-bindings: soc: qcom: spm: Add MSM8909 CPU compatible
soc: qcom: rpmpd: Add compatible for MSM8909
dt-bindings: power: qcom-rpmpd: Add MSM8909 power domains
soc: qcom: smd-rpm: Add compatible for MSM8909
dt-bindings: soc: qcom: smd-rpm: Add MSM8909
soc: qcom: icc-bwmon: Remove unnecessary print function dev_err()
soc: fujitsu: Add A64FX diagnostic interrupt driver
soc: qcom: socinfo: Fix the id of SA8540P SoC
soc: qcom: Make QCOM_RPMPD depend on PM
tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
...
In i2c_mux_probe(), we should call of_node_put() when breaking out
of for_each_child_of_node() which will automatically increase and
decrease the refcount.
Fixes: ac8498f0ce ("i2c: i2c-mux-gpmux: new driver")
Signed-off-by: Liang He <windhl@126.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The introduction of GPI support moved things around and instead of
returning the result from geni_i2c_xfer() the number of messages in the
request was returned, ignoring the actual result. Fix this.
Fixes: d8703554f4 ("i2c: qcom-geni: Add support for GPI DMA")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
SMBus packet error checking (PEC) is implemented by appending one
additional byte of checksum data at the end of the message. This provides
additional protection and allows to detect data corruption on the I2C bus.
SMBus block reads support variable length reads. The first byte in the read
message is the number of available data bytes.
The combination of PEC and block read is currently not supported by the
Cadence I2C driver.
* When PEC is enabled the maximum transfer length for block reads
increases from 33 to 34 bytes.
* The I2C core smbus emulation layer relies on the driver updating the
`i2c_msg` `len` field with the number of received bytes. The updated
length is used when checking the PEC.
Add support to the Cadence I2C driver for handling SMBus block reads with
PEC. To determine the maximum transfer length uses the initial `len` value
of the `i2c_msg`. When PEC is enabled this will be 2, when it is disabled
it will be 1.
Once a read transfer is done also increment the `len` field by the amount
of received data bytes.
This change has been tested with a UCM90320 PMBus power monitor, which
requires block reads to access certain data fields, but also has PEC
enabled by default.
Fixes: df8eb5691c ("i2c: Add driver for Cadence I2C controller")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Shubhrajyoti Datta <Shubhrajyoti.datta@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Waiting for M_CMD_ABORT_EN in geni_i2c_abort_xfer() races with the
interrupt handler which will read and clear the abort bit, the result is
that every abort attempt takes 1 second and is followed by a message
about the abort having times out.
Introduce a new state variable to carry the abort_done state from the
interrupt handler back to geni_i2c_abort_xfer(). Also, turn NACK
and TIMEOUT errors into debug messages
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
[wsa: squashed two patches into one]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This make it easier to disambiguate the different i2c controllers
present in a system, and then correlating with /proc/interrupts allows
to know which instance is interrupt driven and which one is not.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Yet another i2c controller from Renesas that is found on the RZ/V2M
(r9a09g011) SoC. It can support only 100kHz and 400KHz operation.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
[wsa: removed superfluous class type and renamed a function]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add notification to inform caller that driver probing has been
completed. It allows to user, invoked platform device registration for
"i2c-mlxcpld" driver, to be notified that bus adapter is available, and
thus some devices could be connected to this bus.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Problems were observed on the Xilinx ZynqMP platform with large I2C reads.
When a read of 277 bytes was performed, the controller NAKed the transfer
after only 252 bytes were transferred and returned an ENXIO error on the
transfer.
There is some code in cdns_i2c_master_isr to handle this case by resetting
the transfer count in the controller before it reaches 0, to allow larger
transfers to work, but it was conditional on the CDNS_I2C_BROKEN_HOLD_BIT
quirk being set on the controller, and ZynqMP uses the r1p14 version of
the core where this quirk is not being set. The requirement to do this to
support larger reads seems like an inherently required workaround due to
the core only having an 8-bit transfer size register, so it does not
appear that this should be conditional on the broken HOLD bit quirk which
is used elsewhere in the driver.
Remove the dependency on the CDNS_I2C_BROKEN_HOLD_BIT for this transfer
size reset logic to fix this problem.
Fixes: 63cab195bf ("i2c: removed work arounds in i2c driver for Zynq Ultrascale+ MPSoC")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Shubhrajyoti Datta <Shubhrajyoti.datta@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Replace open coded device_get_match_data() in acpi_smbus_cmi_add().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add a new compatible for the stm32mp13. Fast Mode Plus control
register address differ from the one for STM32MP15.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
to provid --> to provide
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Since we have a common P2SB accessor in tree we may use it instead of
open coded variants.
Replace custom code by p2sb_bar() call.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
pull the following:
- Julia fixes a typo in the Broadcom STB legacy power management code
- Liang fixes a device_node reference count leak in the Broadcom STB BIU
driver code error path(s)
- Nicolas and Stefan provide updates to the BCM2835 power management
driver allowing its use on BCM2711 (Raspberry Pi 4) and to enable the
use of the V3D GPU driver on such platforms. This is a merge of an
immutable branch from Lee Jones' MFD tree
- William removes the use of CONFIG_ARCH_BCM_63XX which is removed and
replaces the dependencies with CONFIG_ARCH_BCMBCA which is how all of
the DSL/PON SoCs from Broadcom are now supported in the upstream
kernel.
-----BEGIN PGP SIGNATURE-----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=O/9g
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmLN4J0ACgkQmmx57+YA
GNnFBQ/8CMZHB963Azx+ybxj95ClLjtKKio7IjQRr4YoawXHYdNipLumrBS3V7BZ
qu432X9gGHC5QP4U46d4zHUvWeLqPwsns6WnTa8wwbY2kAccnoCtOaVyWM8O2YyS
n7Zwq6wSEul6GT7ig+eEsZ5NFhC3+i1C/mqCZfcEGWrIfzse5UwKVmcG/dmnavIP
NtmaWMWr2PUvF3VJpgn71JpWJegkyANjDi7JJC/71h5MzjNrpGsE3XG5QyLpQfRZ
+lAxT+2zJNbk+eSnISg1bpaeL/S9F8vrmzpgMEcCcydcpgQQ7I/M9nx+mNAbpRwn
c7DuoXYB9VNX6bsI0pUjavhMc3qAIPtgYknGe/WhAmS6D4y/IfTJ7L91irULH/gC
ZDH2aDTblhtefiSgd8X9RJyRTZb0CtTUoSR2ST0SfpMI8xJaaswXBS7nYfLib08v
pSLAU6qalUpJpJ+ADeSEIbfUjuGR6GR1iT1R4dpdp3NfhR8u6bPdkphxzwdzctBL
bZ+ZcFMlAfSp07FzII+2Ce5fuT5qM7rdqKurL5WFmJOYIHfqGDTESWp5vvViAHPJ
2c+ONWnPvMXoKxC6d90E8AhOhvOeE1frfu5NWJtzU7OY98rI1J5nFEF9hmVQWZ3p
hfEzP+wiBuN2mHRDNtgmmJFFhbzPdXlY5QafR2XDm1kpfuFh/cY=
=yTZT
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.20/drivers' of https://github.com/Broadcom/stblinux into arm/drivers
This pull request contains Broadcom SoC drivers updatse for 5.20, please
pull the following:
- Julia fixes a typo in the Broadcom STB legacy power management code
- Liang fixes a device_node reference count leak in the Broadcom STB BIU
driver code error path(s)
- Nicolas and Stefan provide updates to the BCM2835 power management
driver allowing its use on BCM2711 (Raspberry Pi 4) and to enable the
use of the V3D GPU driver on such platforms. This is a merge of an
immutable branch from Lee Jones' MFD tree
- William removes the use of CONFIG_ARCH_BCM_63XX which is removed and
replaces the dependencies with CONFIG_ARCH_BCMBCA which is how all of
the DSL/PON SoCs from Broadcom are now supported in the upstream
kernel.
* tag 'arm-soc/for-5.20/drivers' of https://github.com/Broadcom/stblinux:
tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
phy: brcm-sata: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
i2c: brcmstb: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
ata: ahci_brcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
soc: bcm: bcm2835-power: Bypass power_on/off() calls
soc: bcm: bcm2835-power: Add support for BCM2711's RPiVid ASB
soc: bcm: bcm2835-power: Resolve ASB register macros
soc: bcm: bcm2835-power: Refactor ASB control
mfd: bcm2835-pm: Add support for BCM2711
mfd: bcm2835-pm: Use 'reg-names' to get resources
soc: bcm: brcmstb: biuctrl: Add missing of_node_put()
soc: bcm: brcmstb: pm: pm-arm: fix typo in comment
Link: https://lore.kernel.org/r/20220711164451.3542127-6-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make
I2C_BRCMSTB depending on ARCH_BCMBCA.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This patch ensures that the clock notifier is unregistered
when driver probe is returning error.
Fixes: df8eb5691c ("i2c: Add driver for Cadence I2C controller")
Signed-off-by: Satish Nagireddy <satish.nagireddy@getcruise.com>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add Microchip CoreI2C i2c controller support. This driver supports the
"hard" i2c controller on the Microchip PolarFire SoC & the basic feature
set for "soft" i2c controller implemtations in the FPGA fabric.
Co-developed-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add SMBus PCI ID on Intel Meteor Lake-P.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The recently added support for EFCH MMIO regions introduced a memory
leak in that code path. The leak is caused by the fact that
release_resource() merely removes the resource from the tree but does
not free its memory. We need to call release_mem_region() instead,
which does free the memory. As a nice side effect, this brings back
some symmetry between the legacy and MMIO paths.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Terry Bowman <terry.bowman@amd.com>
Tested-by: Terry Bowman <Terry.Bowman@amd.com>
Fixes: 7c148722d0 ("i2c: piix4: Add EFCH MMIO support to region request and release")
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Switch mpc5xxx_get_bus_frequency() to use fwnode in order to help
cleaning up other parts of the kernel from OF specific code.
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # for i2c-mpc
Acked-by: Wolfram Sang <wsa@kernel.org> # for the I2C part
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for mscan/mpc5xxx_can
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220507100147.5802-2-andriy.shevchenko@linux.intel.com
Free the adap structure only after we are done using it.
This patch just moves the put_device() down a bit to avoid the
use after free.
Fixes: 611e12ea0f ("i2c: core: manage i2c bus device refcount in i2c_[get|put]_adapter")
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
[wsa: added comment to the code, added Fixes tag]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
HZ macros has been centralized in units.h since [1]. Use it to avoid
duplicated definition.
[1] commit e2c77032fc ("units: add the HZ macros")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
MSM8974 CCI is the same as MSM8916 except it has two masters.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The clsk are prepared, enabled, then disabled. So if an error occurs after
the disable step, they are still prepared.
Add an error handling path to unprepare the clks in such a case, as already
done in the .remove function.
Fixes: 8b4fc246c3 ("i2c: mediatek: Optimize master_xfer() and avoid circular locking")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add an atomic_xfer method to the driver so that it behaves correctly
when controlling a PMIC that is responsible for device shutdown.
The atomic_xfer method added is similar to the one from the i2c-rk3x
driver. When running an atomic_xfer a bool flag in the driver data is
set, the interrupt is not unmasked on transfer start, and the IRQ
handler is manually invoked while waiting for pending transfers to
complete.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When I attempt to shut down (or reboot) my R8 based NTC CHIP with this
i2c driver I get the following error: "i2c i2c-0: mv64xxx: I2C bus
locked, block: 1, time_left: 0". Reboots are successful but shutdowns
freeze. If I comment out the shutdown routine the device both reboots
and shuts down successfully without receiving this error (however it
does receive a warning of missing atomic_xfer).
It appears that very few i2c drivers have a shutdown method, I assume
because these devices are often used to communicate with PMICs (such
as in my case with the R8 based NTC CHIP). I'm proposing we simply
remove this method so long as it doesn't cause trouble for others
downstream. I'll work on an atomic_xfer method and submit that in
a different patch.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fix the coverity warning
mixed_enum_type: enumerated type mixed with another type
We are passing an enum in the xiic_wakeup lets change
the function parameters to reflect that.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Acked-by: Michal Simek <michal.simek@amd.com>
[wsa: fixed $subject with proper prefix]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Even though the DW I2C controller reference clock source is requested by
the method devm_clk_get() with non-optional clock requirement the way the
clock handler is used afterwards has a pure optional clock semantic
(though in some circumstances we can get a warning about the clock missing
printed in the system console). There is no point in reimplementing that
functionality seeing the kernel clock framework already supports the
optional interface from scratch. Thus let's convert the platform driver to
using it.
Note by providing this commit we get to fix two problems. The first one
was introduced in commit c62ebb3d5f ("i2c: designware: Add support for
an interface clock"). It causes not having the interface clock (pclk)
enabled/disabled in case if the reference clock isn't provided. The second
problem was first introduced in commit b33af11de2 ("i2c: designware: Do
not require clock when SSCN and FFCN are provided"). Since that
modification the deferred probe procedure has been unsupported in case if
the interface clock isn't ready.
Fixes: c62ebb3d5f ("i2c: designware: Add support for an interface clock")
Fixes: b33af11de2 ("i2c: designware: Do not require clock when SSCN and FFCN are provided")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Based on the normalized pattern:
this program is free software you can redistribute it and/or modify it
under the terms of the gnu general public license as published by the
free software foundation version 2 this program is distributed as is
without any warranty of any kind whether express or implied without
even the implied warranty of merchantability or fitness for a
particular purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference.
Reviewed-by: Allison Randal <allison@lohutok.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A remove callback that just returns 0 is equivalent to no callback at all
as can be seen in i2c_device_remove(). So simplify accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Change the of_device_get_match_data() cast to (uintptr_t)
to silence the following clang warning:
drivers/i2c/busses/i2c-mxs.c:802:18: warning: cast to smaller integer type 'enum mxs_i2c_devtype' from 'const void *' [-Wvoid-pointer-to-enum-cast]
Reported-by: kernel test robot <lkp@intel.com>
Fixes: c32abd8b56 ("i2c: mxs: Remove unneeded platform_device_id")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
As platform_driver_register() could fail, it should be better
to deal with the return value in order to maintain the code
consisitency.
Fixes: 56a1485b10 ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Trivial non-functional change, which adds an alias to an extensively
used data location.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Make the one-line comments capital in the driver to get the comment style
consistent.
Fixes: 56a1485b10 ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add NPCM8XX I2C support.
The NPCM8XX uses a similar i2c module as NPCM7XX.
The internal HW FIFO is larger in NPCM8XX.
Signed-off-by: Tyrone Ting <kfting@nuvoton.com>
Acked-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Correct the slave transaction logic to be compatible with the generic
slave backend driver.
Fixes: 56a1485b10 ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
NPCM can support up to 10 own slave addresses. In practice, only one
address is actually being used. In order to access addresses 2 and above,
need to switch register banks. The switch needs spinlock.
To avoid using spinlock for this useless feature removed support of SA >=
2. Also fix returned slave event enum.
Remove some comment since the bank selection is not required. The bank
selection is not required since the supported slave addresses are reduced.
Fixes: 56a1485b10 ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The "data->block[0]" variable comes from the user and is a number
between 0-255. It needs to be capped to prevent writing beyond the end
of dma_buffer[].
Fixes: 5e9a97b1f4 ("i2c: ismt: Adding support for I2C_SMBUS_BLOCK_PROC_CALL")
Reported-and-tested-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I2C has only driver updates for 5.19. Bigger changes are for Meson,
NPCM, and R-Car, but there are also changes all over the place.
-----BEGIN PGP SIGNATURE-----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=vdUW
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Only driver updates for 5.19.
Bigger changes are for Meson, NPCM, and R-Car, but there are also
changes all over the place"
* tag 'i2c-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits)
i2c: meson: fix typo in comment
i2c: rcar: use flags instead of atomic_xfer
i2c: rcar: REP_AFTER_RD is not a persistent flag
i2c: rcar: use BIT macro consistently
i2c: qcom-geni: remove unnecessary conditions
i2c: mt7621: Use devm_platform_get_and_ioremap_resource()
i2c: rcar: refactor handling of first message
i2c: rcar: avoid race condition with SMIs
i2c: xiic: Correct the datatype for rx_watermark
i2c: rcar: fix PM ref counts in probe error paths
i2c: npcm: Handle spurious interrupts
i2c: npcm: Correct register access width
i2c: npcm: Add tx complete counter
i2c: npcm: Fix timeout calculation
i2c: npcm: Remove unused variable clk_regmap
i2c: npcm: Change the way of getting GCR regmap
i2c: xiic: Fix Tx Interrupt path for grouped messages
i2c: xiic: Fix coding style issues
i2c: xiic: return value of xiic_reinit
i2c: cadence: Increase timeout per message if necessary
...
Due to i2c->adap.dev.fwnode not being set, ACPI_COMPANION() wasn't properly
found for TWSI controllers.
Signed-off-by: Szymon Balcerak <sbalcerak@marvell.com>
Signed-off-by: Piyush Malgujar <pmalgujar@marvell.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
i2c-rcar already has priv->flags. This patch adds a new persistent flag
ID_P_NOT_ATOMIC and uses it to save the extra variable. The negation of
the logic was done to make the code more readable.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[wsa: negated the logic, rebased, updated the commit message]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Previous refactoring makes it easy now to convert the above flag to a
non-persistent one. This is more appropriate and easier to maintain.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Before sending a MSI the hardware writes information pertinent to the
interrupt cause to a memory location pointed by SMTICL register. This
memory holds three double words where the least significant bit tells
whether the interrupt cause of master/target/error is valid. The driver
does not use this but we need to set it up because otherwise it will
perform DMA write to the default address (0) and this will cause an
IOMMU fault such as below:
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Write] Request device [00:12.0] PASID ffffffff fault addr 0
[fault reason 05] PTE Write access is not set
To prevent this from happening, provide a proper DMA buffer for this
that then gets mapped by the IOMMU accordingly.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
We know that "ret" is a negative error code at this point so there is
no need to check.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Use devm_platform_get_and_ioremap_resource() to simplify
code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fix the missing clk_disable_unprepare() before return
from mtk_i2c_probe() in the error handling case.
Fixes: d04913ec5f ("i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
After moving ICMSR handling to interrupt handlers previously to fix a
race condition, we can now also move ICMSR handling for the first
message out of the function to prepare a message. By introducing a
seperate function to initialize the first message, we can not only
remove some code duplication but the remaining code is also easier to
follow. The function to prepare a message is much simpler without ICMSR
handling.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
A customer experienced a race condition with 'repeated starts' when a
System Management Interrupt took over for 30us and more. The problem was
that during the SMI a new MAT interrupt came in because we set up the
'repeated start' condition. But the old one was not acknowledged yet.
So, when it was acknowledged after the SMI, the new MAT interrupt was
lost, confusing the state machine of the driver.
The fix consists of two parts. First, we do not clear the status
register for 'repeated starts' when preparing the next message anymore.
The interrupt handlers for sending and receiving data is now solely
responsible for that and it makes the code easier to follow, in fact.
Secondly, clearing the status register is now split up to handle MAT
interrupts independently. This avoids the race condition because the old
MAT interrupt will be now cleared before we initiate the "repeated
start" condition.
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The message length data type should be u16 as per the i2c_msg structure.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
We have to take care of ID_P_PM_BLOCKED when bailing out during probe.
Fixes: 7ee24eb508 ("i2c: rcar: disable PM in multi-master mode")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
On some platforms in rare cases (1 to 100,000 transactions),
the i2c gets a spurious interrupt which means that we enter an interrupt
but in the interrupt handler we don't find any status bit that points to
the reason we got this interrupt.
This may be a case of a rare HW issue or signal integrity issue that is
still under investigation.
In order to overcome this we are doing the following:
1. Disable incoming interrupts in master mode only when slave mode is not
enabled.
2. Clear end of busy (EOB) after every interrupt.
3. Clear other status bits (just in case since we found them cleared)
4. Return correct status during the interrupt that will finish the
transaction.
On next xmit transaction if the bus is still busy the master will issue a
recovery process before issuing the new transaction.
Fixes: 56a1485b10 ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The SMBnCTL3 register is 8-bit wide and the 32-bit access was always
incorrect, but simply didn't cause a visible error on the 32-bit machine.
On the 64-bit machine, the kernel message reports that ESR value is
0x96000021. Checking Arm Architecture Reference Manual Armv8 suggests that
it's the alignment fault.
SMBnCTL3's address is 0xE.
Fixes: 56a1485b10 ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
tx_complete counter is used to indicate successful transaction count.
Similar counters for failed tx were previously added.
Signed-off-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Use adap.timeout for timeout calculation instead of hard-coded
value of 35ms.
Fixes: 56a1485b10 ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Remove unused variable clk_regmap.
Signed-off-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Change the way of getting NPCM system manager reigster (GCR)
and still maintain the old mechanism as a fallback if getting
nuvoton,sys-mgr fails while working with the legacy devicetree
file.
Signed-off-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Tyrone Ting <kfting@nuvoton.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When a group of messages are sent from user space as a set, if
the last message has less than Tx FIFO DEPTH number of bytes
to transfer, Tx half empty interrupt is triggered continuously
from the hardware. It is due to Bus not busy interrupt coming
along with Tx half empty and tx empty.
Hence, service the Tx interrupts before Bus not busy interrupt
to update the i2c message status correctly.
Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Most of these stuff are reported by checkpatch.
But fixes are:
- Incorrect indetation
- Missing blank line after variable declaration
- Additional ()
- Missing spaces around +
- Missing parenthesis when if has them
- Newlines
- Remove MODULE_ALIAS - none is really using it
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Check the return value of xiic_reinit.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Timeout as 1 second sets an upper limit on the length
of the transfer executed, but there is no maximum length
of a write or read message set in i2c_adapter_quirks for
this controller.
This upper limit affects devices that require sending
large firmware blobs over I2C.
To remove that limitation, calculate the minimal time
necessary, plus some wiggle room, for every message and
use it instead of the default one second, if more than
one second.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
It's more logical to read these get timing parameters ACPI method calls
sorted by speed categories in increasing order: Standard-mode,
Fast-mode, Fast-mode Plus and High-speed mode.
Originally these were in order after commit a92ec1746f
("i2c: designware: get fast plus and high speed *CNT configuration") but
got mixed up over the years.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Clang warns:
drivers/i2c/busses/i2c-at91-master.c:707:6: warning: variable 'dma_buf' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
if (dev->use_dma) {
^~~~~~~~~~~~
drivers/i2c/busses/i2c-at91-master.c:717:27: note: uninitialized use occurs here
i2c_put_dma_safe_msg_buf(dma_buf, m_start, !ret);
^~~~~~~
Initialize dma_buf to NULL, as i2c_put_dma_safe_msg_buf() is a no-op
when the first argument is NULL, which will work for the !dev->use_dma
case.
Fixes: 03fbb903c8 ("i2c: at91: use dma safe buffers")
Link: https://github.com/ClangBuiltLinux/linux/issues/1629
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fix the missing clk_disable_unprepare() before return
from meson_i2c_probe() in the error handling case.
Fixes: a57f9b4dd6 ("i2c: meson: Use 50% duty cycle for I2C clock")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
powerpc's asm/prom.h brings some headers that it doesn't
need itself.
In order to clean it up, first add missing headers in
users of asm/prom.h
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The supplied buffer might be on the stack and we get the following error
message:
[ 3.312058] at91_i2c e0070600.i2c: rejecting DMA map of vmalloc memory
Use i2c_{get,put}_dma_safe_msg_buf() to get a DMA-able memory region if
necessary.
Fixes: 60937b2cdb ("i2c: at91: add dma support")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Especially (but not only) during probe, it may happen that multiple
devices are communicating via i2c (or multiple i2c busses) and
sometimes while others are probing asynchronously.
For example, a Cr50 TPM may be filling entropy (or userspace may be
reading random data) while the rt5682 (i2c) codec driver reads/sets
some registers, like while getting/setting a clock's rate, which
happens both during probe and during system operation.
In this driver, the mtk_i2c_transfer() function (which is the i2c
.master_xfer() callback) was granularly managing the clocks by
performing a clk_bulk_prepare_enable() to start them and its inverse.
This is not only creating possible circular locking dependencies in
the some cases (like former explanation), but it's also suboptimal,
as clk_core prepare/unprepare operations are using mutex locking,
which creates a bit of unwanted overhead (for example, i2c trackpads
will call master_xfer() every few milliseconds!).
With this commit, we avoid both the circular locking and additional
overhead by changing how we handle the clocks in this driver:
- Prepare the clocks during probe (and PM resume)
- Enable/disable clocks in mtk_i2c_transfer()
- Unprepare the clocks only for driver removal (and PM suspend)
For the sake of providing a full explanation: during probe, the
clocks are not only prepared but also enabled, as this is needed
for some hardware initialization but, after that, we are disabling
but not unpreparing them, leaving an expected state for the
aforementioned clock handling strategy.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Adjust retry period and timeout values for x86-PSP mailbox based on the
typical I2C traffic generated by PSP. In order to limit the possibility
of timeouts, x86 should reduce the interval between retries as well as
increase overall time after which it gives up.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fix:
drivers/i2c/busses/i2c-ismt.c: In function ‘ismt_hw_init’:
drivers/i2c/busses/i2c-ismt.c:770:2: error: case label does not reduce to an integer constant
case ISMT_SPGT_SPD_400K:
^~~~
drivers/i2c/busses/i2c-ismt.c:773:2: error: case label does not reduce to an integer constant
case ISMT_SPGT_SPD_1M:
^~~~
See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The duty cycle of 33% is less than the required
by the I2C specs for the LOW period of the SCL
clock.
Move the duty cyle to 50% for 100Khz or lower
clocks, and (40% High SCL / 60% Low SCL) duty
cycle for clocks above 100Khz.
Signed-off-by: Lucas Tanure <tanure@linux.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Differentiate between masks and shifts
Signed-off-by: Lucas Tanure <tanure@linux.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
With this feature added, SMBus Block reads and Proc calls are now
supported. This patch is the best of two independent developments by
Wolfram and Bhuvanesh + Andrew, refactored again by Wolfram.
Signed-off-by: Bhuvanesh Surachari <bhuvanesh_surachari@mentor.com>
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Sparse has warned us about wrong address space for user pointers:
i2c-dev.c:561:50: warning: incorrect type in initializer (different address spaces)
i2c-dev.c:561:50: expected unsigned char [usertype] *buf
i2c-dev.c:561:50: got void [noderef] __user *
Force cast the pointer to (__u8 *) that is used by I²C core code.
Note, this is an additional fix to the previously addressed similar issue
in the I2C_RDWR case in the same function.
Fixes: 3265a7e6b4 ("i2c: dev: Add __user annotation")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
If dev_set_name() fails, the dev_name() is null, check the return
value of dev_set_name() to avoid the null-ptr-deref.
Fixes: 1413ef638a ("i2c: dev: Fix the race between the release of i2c_dev and cdev")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The GPI DMA engine driver can be compiled as a module, in which case the
likely probe deferral "error" shows up in the kernel log. Switch to
using dev_err_probe() to silence this warning and to ensure that
"devices_deferred" in debugfs carries this information.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The i.MX8MP Mask Set Errata for Mask 1P33A, Rev. 2.0 has description of
errata ERR007805 as below. This errata is found on all MX8M{M,N,P,Q},
MX7{S,D}, MX6{UL{,L,Z},S{,LL,X},S,D,DL,Q,DP,QP} . MX7ULP, MX8Q, MX8X
are not affected. MX53 and older status is unknown, as the errata
first appears in MX6 errata sheets from 2016 and the latest errata
sheet for MX53 is from 2015. Older SoC errata sheets predate the
MX53 errata sheet. MX8ULP and MX9 status is unknown as the errata
sheet is not available yet.
"
ERR007805 I2C: When the I2C clock speed is configured for 400 kHz,
the SCL low period violates the I2C spec of 1.3 uS min
Description: When the I2C module is programmed to operate at the
maximum clock speed of 400 kHz (as defined by the I2C spec), the SCL
clock low period violates the I2C spec of 1.3 uS min. The user must
reduce the clock speed to obtain the SCL low time to meet the 1.3us
I2C minimum required. This behavior means the SoC is not compliant
to the I2C spec at 400kHz.
Workaround: To meet the clock low period requirement in fast speed
mode, SCL must be configured to 384KHz or less.
"
Implement the workaround by matching on the affected SoC specific
compatible strings and by limiting the maximum bus frequency in case
the SoC is affected.
Signed-off-by: Marek Vasut <marex@denx.de>
To: linux-i2c@vger.kernel.org
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Wait for completion of write transfers before returning from the driver.
At first sight it may seem advantageous to leave write transfers queued
for the controller to carry out on its own time, but there's a couple of
issues with it:
* Driver doesn't check for FIFO space.
* The queued writes can complete while the driver is in its I2C read
transfer path which means it will get confused by the raising of
XEN (the 'transaction ended' signal). This can cause a spurious
ENODATA error due to premature reading of the MRXFIFO register.
Adding the wait fixes some unreliability issues with the driver. There's
some efficiency cost to it (especially with pasemi_smb_waitready doing
its polling), but that will be alleviated once the driver receives
interrupt support.
Fixes: beb58aa39e ("i2c: PA Semi SMBus driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Pull i2c updates from Wolfram Sang:
- tracepoints when Linux acts as an I2C client
- added support for AMD PSP
- whole subsystem now uses generic_handle_irq_safe()
- piix4 driver gained MMIO access enabling so far missed controllers
with AMD chipsets
- a bulk of device driver updates, refactorization, and fixes.
* 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (61 commits)
i2c: mux: demux-pinctrl: do not deactivate a master that is not active
i2c: meson: Fix wrong speed use from probe
i2c: add tracepoints for I2C slave events
i2c: designware: Remove code duplication
i2c: cros-ec-tunnel: Fix syntax errors in comments
MAINTAINERS: adjust XLP9XX I2C DRIVER after removing the devicetree binding
i2c: designware: Mark dw_i2c_plat_{suspend,resume}() as __maybe_unused
i2c: mediatek: Add i2c compatible for Mediatek MT8168
dt-bindings: i2c: update bindings for MT8168 SoC
i2c: mt65xx: Simplify with clk-bulk
i2c: i801: Drop two outdated comments
i2c: xiic: Make bus names unique
i2c: i801: Add support for the Process Call command
i2c: i801: Drop useless masking in i801_access
i2c: tegra: Add SMBus block read function
i2c: designware: Use the i2c_mark_adapter_suspended/resumed() helpers
i2c: designware: Lock the adapter while setting the suspended flag
i2c: mediatek: remove redundant null check
i2c: mediatek: modify bus speed calculation formula
i2c: designware: Fix improper usage of readl
...
power-supply core:
- Introduce "Bypass" charging type used by USB PPS standard
- Refactor power_supply_set_input_current_limit_from_supplier()
- Add fwnode support to power_supply_get_battery_info()
Drivers:
- ab8500: continue migrating towards using standard core APIs
- axp288 fuel-gauge: refactor driver to be fully resource managed
- battery-samsung-sdi: new in-kernel provider for (constant) Samsung battery info
- bq24190: disable boost regulator on shutdown
- bq24190: add support for battery-info on ACPI based systems
- bq25890: prepare driver for usage on ACPI based systems
- bq25890: add boost regulator support
- cpcap-battery: add NVMEM based battery detection support
- injoinic ip5xxx: new driver for power bank IC
- upi ug3105: new battery driver
- misc. small improvements and fixes
-----BEGIN PGP SIGNATURE-----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=OiYc
-----END PGP SIGNATURE-----
Merge tag 'for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- Introduce "Bypass" charging type used by USB PPS standard
- Refactor power_supply_set_input_current_limit_from_supplier()
- Add fwnode support to power_supply_get_battery_info()
Drivers:
- ab8500: continue migrating towards using standard core APIs
- axp288 fuel-gauge: refactor driver to be fully resource managed
- battery-samsung-sdi: new in-kernel provider for (constant) Samsung
battery info
- bq24190: disable boost regulator on shutdown
- bq24190: add support for battery-info on ACPI based systems
- bq25890: prepare driver for usage on ACPI based systems
- bq25890: add boost regulator support
- cpcap-battery: add NVMEM based battery detection support
- injoinic ip5xxx: new driver for power bank IC
- upi ug3105: new battery driver
- misc small improvements and fixes"
* tag 'for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (94 commits)
power: ab8500_chargalg: Use CLOCK_MONOTONIC
power: supply: Add a driver for Injoinic power bank ICs
dt-bindings: trivial-devices: Add Injoinic power bank ICs
dt-bindings: vendor-prefixes: Add Injoinic
power: supply: ab8500: Remove unused variable
power: supply: da9150-fg: Remove unnecessary print function dev_err()
power: supply: ab8500: fix a handful of spelling mistakes
power: supply: ab8500_fg: Account for line impedance
dt-bindings: power: supply: ab8500_fg: Add line impedance
power: supply: axp20x_usb_power: fix platform_get_irq.cocci warnings
power: supply: axp20x_ac_power: fix platform_get_irq.cocci warning
power: supply: wm8350-power: Add missing free in free_charger_irq
power: supply: wm8350-power: Handle error for wm8350_register_irq
power: supply: Static data for Samsung batteries
power: supply: ab8500_fg: Use VBAT-to-Ri if possible
power: supply: Support VBAT-to-Ri lookup tables
power: supply: ab8500: Standardize BTI resistance
power: supply: ab8500: Standardize alert mode charging
power: supply: ab8500: Standardize maintenance charging
power: supply: bq24190_charger: Delay applying charge_type changes when OTG 5V Vbus boost is on
...
Attempting to rollback the activation of the current master when
the current master has not been activated is bad. priv->cur_chan
and priv->cur_adap are both still zeroed out and the rollback
may result in attempts to revert an of changeset that has not been
applied and do result in calls to both del and put the zeroed out
i2c_adapter. Maybe it crashes, or whatever, but it's bad in any
case.
Fixes: e9d1a0a41d ("i2c: mux: demux-pinctrl: Fix an error handling path in 'i2c_demux_pinctrl_probe()'")
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Having meson_i2c_set_clk_div after i2c_add_adapter
causes issues for client drivers that try to use
the bus before the requested speed is applied.
The bus can be used just after i2c_add_adapter, so
move i2c_add_adapter to the final step as
meson_i2c_set_clk_div needs to be called before
the bus is used.
Fixes: 09af1c2fa4 ("i2c: meson: set clock divider in probe instead of setting it for each transfer")
Signed-off-by: Lucas Tanure <tanure@linux.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Simplify code by moving common part to one function.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Delete the redundant word 'to'
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
[wsa: fixed prefix in subject]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When CONFIG_PM is set but CONFIG_PM_SLEEP is not, two compiler warnings
appear:
drivers/i2c/busses/i2c-designware-platdrv.c:444:12: error: unused function 'dw_i2c_plat_suspend' [-Werror,-Wunused-function]
static int dw_i2c_plat_suspend(struct device *dev)
^
drivers/i2c/busses/i2c-designware-platdrv.c:465:12: error: unused function 'dw_i2c_plat_resume' [-Werror,-Wunused-function]
static int dw_i2c_plat_resume(struct device *dev)
^
2 errors generated.
These functions are only used in SET_LATE_SYSTEM_SLEEP_PM_OPS(), which
is defined as empty when CONFIG_PM_SLEEP is not defined. Mark the
functions as __maybe_unused to make it clear that these functions might
be unused in this configuration.
Fixes: c57813b8b2 ("i2c: designware: Lock the adapter while setting the suspended flag")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add i2c compatible for MT8168. Compare to MT2712 i2c controller,
MT8168 need to synchronize signal with dma.
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Since depending on the SoC or specific bus functionality some clocks
may be optional, we cannot get the benefit of using devm_clk_bulk_get()
but, by migrating to clk-bulk, we are able to remove the custom functions
mtk_i2c_clock_enable() and mtk_i2c_clock_disable(), increasing common
APIs usage, hence (lightly) decreasing kernel footprint.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
* Timeouts are reported even in interrupt mode since commit
b3b8df9772 ("i2c: i801: Use wait_event_timeout to wait for
interrupts") so drop the comment which claims this only happens in
polled mode.
* xact does not include the PEC bit, as the driver does not support
software PEC.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This driver is for an FPGA logic core, so there can be arbitrarily many
instances of the bus on a given system. Previously all of the I2C bus
names were "xiic-i2c" which caused issues with lm_sensors when trying to
map human-readable names to sensor inputs because it could not properly
distinguish the busses, for example. Append the platform device name to
the I2C bus name so it is unique between different instances.
Fixes: e1d5b6598c ("i2c: Add support for Xilinx XPS IIC Bus Interface")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The Process Call command is implemented by the hardware since the very
first Intel 82801 chipset, and trivial to support. Oscar Romero
Matamala from the Georgia Institute of Technology told me it is needed
for an experiment his team is working on at the moment, so let's just
add support for it.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
I went all the way back to kernel 2.6.12 and that masking was never
needed. I suppose it was there in anticipation of software PEC
support, but that was never added to the driver (and never will be,
as this is made obsolete by hardware PEC).
I'm also removing initialization to 0, which is not needed either,
and would prevent the compiler from reporting an actual usage of
uninitialized variables.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Use the i2c_mark_adapter_suspended/resumed() i2c-core helpers and rely
on the i2c-core's suspended checking instead of using DIY code.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Lock the adapter while setting the suspended flag, to ensure that other
locked code always sees the change immediately, rather then possibly using
a stale value.
This involves splitting the suspend/resume callbacks into separate runtime
and normal suspend/resume calls. This is necessary because i2c_dw_xfer()
will get called by the i2c-core with the adapter locked and it in turn
calls the runtime-resume callback through pm_runtime_get_sync().
So the runtime versions of the suspend/resume callbacks cannot take
the adapter-lock. Note this patch simply makes the runtime suspend/resume
callbacks not deal with the suspended flag at all. During runtime the
pm_runtime_get_sync() from i2c_dw_xfer() will always ensure that the
adapter is resumed when necessary.
The suspended flag check is only necessary to check proper suspend/resume
ordering during normal suspend/resume which makes the pm_runtime_get_sync()
call a no-op.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Because clk_disable_unprepare already checked NULL clock parameter,
so the additional checks are unnecessary, just remove it
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When clock-div is 0 or greater than 1, the bus speed
calculated by the old speed calculation formula will be
larger than the target speed. So we update the formula.
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Kernel test robot reported incorrect type in argument 1 of readl(), but
more importantly it brought attention that MMIO accessor shouldn't be
used in this case, since req->hdr.status is part of a command-response
buffer in system memory.
Since its value may be altered by PSP outside of the scope of current
thread (somehow similar to IRQ handler case), we need to use
READ_ONCE() to ensure compiler won't optimize this call.
Fix also 'status' variable type to reflect that corresponding field in
command-response buffer is platform-independent u32.
Fixes: 78d5e9e299 ("i2c: designware: Add AMD PSP I2C bus support")
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
QUP Serial engines supports data transfers thru FIFO mode, SE DMA mode
and lastly GPI DMA mode. Former two are already supported and this adds
supports for the last mode.
In GPI DMA mode, the firmware is issued commands by driver to perform
DMA and setup the serial port.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Read reset phandle as optional instead of exclusive so that all the DT's
passing the reset phandle can be used to assert/deassert the reset line.
With this change we don't have to differentiate the RZ/G2L SoC.
With the above changes we no longer need the "renesas,riic-r9a07g044"
compatible string, so drop it from riic_i2c_dt_ids[]. No changes are
required to the r9a07g044.dtsi as we already have "renesas,riic-rz" as a
fallback compatible string.
While at it, check the return code of reset_control_deassert() as it might
fail and also add a devres action to assert the reset line.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Instead of manually disabling interrupts before invoking use
generic_handle_irq_safe() which can be invoked with enabled and disabled
interrupts.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The i2c-i801 driver invokes i2c_handle_smbus_host_notify() from his
interrupt service routine. On PREEMPT_RT i2c-i801's handler is forced
threaded with enabled interrupts which leads to a warning by
handle_irq_event_percpu() assuming that irq_default_primary_handler()
enabled interrupts.
i2c-i801's interrupt handler can't be made non-threaded because the
interrupt line is shared with other devices.
Use generic_handle_irq_safe() which can invoked with disabled and enabled
interrupts.
Reported-by: Michael Below <below@judiz.de>
Link: https://bugs.debian.org/1002537
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
An I²C adapter might be instantiated without parent. In such case
there is no property can be retrieved. Skip SMBus alert setup when
this happens.
Fixes: a263a84088 ("i2c: smbus: Use device_*() functions instead of of_*()")
Reported-by: syzbot+0591ccf54ee05344e4eb@syzkaller.appspotmail.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
DSL and CM (Cable Modem) support 8 B max transfer size and have a custom
DT binding for that reason. This driver was checking for a wrong
"compatible" however which resulted in an incorrect setup.
Fixes: e2e5a2c618 ("i2c: brcmstb: Adding support for CM and DSL SoCs")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add QCOM SM8450 specific compatible for CCI controller, which is
equal to CCI controllers found on QCOM SDM845 and QCOM SM8250 SoCs.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Drop I2C device-probing classes from platform variant of the PASemi
controller as it is only used on platforms where I2C devices should
be instantiated in devicetree. (The I2C_CLASS_DEPRECATED flag is not
raised as up to this point no devices relied on the old behavior.)
Fixes: d88ae2932d ("i2c: pasemi: Add Apple platform driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Driver builds fine with COMPILE_TEST. Enable it for wider test coverage
and easier maintenance.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Driver builds fine with COMPILE_TEST. Enable it for wider test coverage
and easier maintenance.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Eliminate the following coccicheck warnings:
./drivers/i2c/busses/i2c-designware-amdpsp.c:172:2-3: Unneeded semicolon
./drivers/i2c/busses/i2c-designware-amdpsp.c:245:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jan Dabros <jsd@semihalf.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Instead of open coded variant switch to use i2c_new_ccgx_ucsi().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
It's fine to call dev_err_probe() in ->probe() when error code is known.
Convert the driver to use dev_err_probe().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Use temporary variable for struct device to make code neater.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Instead of open coded variant switch to use i2c_new_ccgx_ucsi().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Introduce a common module to provide an API to instantiate UCSI device
for Cypress CCGx Type-C controller. Individual bus drivers need to select
this one on demand.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add SMBus PCI ID on Intel Raptor Lake PCH-S.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
i2c_setup_smbus_alert() is only needed within the I2C core, so no need
to expose it to other modules.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
There is a minor chance for a race, if a pointer to an i2c-bus subnode
is stored and then reused after releasing its reference, and it would
be sufficient to get one more reference under a loop over children
subnodes.
Fixes: e517526195 ("i2c: Add Qualcomm CCI I2C driver")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
If i2c_add_adapter() fails to add an I2C adapter found on QCOM CCI
controller, on error path i2c_del_adapter() is still called.
Fortunately there is a sanity check in the I2C core, so the only
visible implication is a printed debug level message:
i2c-core: attempting to delete unregistered adapter [Qualcomm-CCI]
Nevertheless it would be reasonable to correct the probe error path.
Fixes: e517526195 ("i2c: Add Qualcomm CCI I2C driver")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
BCM4908 SoCs use the same I2C hardware block as STB and BCM63xx devices.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add support for the I2C Bus Interface on R-Car Gen4 SoCs (e.g. R-Car
S4-8) by matching on a family-specific compatible value.
While I2C on R-Car Gen4 does support some extra features (Slave Clock
Stretch Select), for now it is treated the same as I2C on R-Car Gen3.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
[wsa: removed incorrect "FM+" from commit message]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Implement an I2C controller sharing mechanism between the host (kernel)
and PSP co-processor on some platforms equipped with AMD Cezanne SoC.
On these platforms we need to implement "software" i2c arbitration.
Default arbitration owner is PSP and kernel asks for acquire as well
as inform about release of the i2c bus via mailbox mechanism.
+---------+
<- ACQUIRE | |
+---------| CPU |\
| | | \ +----------+ SDA
| +---------+ \ | |-------
MAILBOX +--> | I2C-DW | SCL
| +---------+ | |-------
| | | +----------+
+---------| PSP |
<- ACK | |
+---------+
+---------+
<- RELEASE | |
+---------| CPU |
| | | +----------+ SDA
| +---------+ | |-------
MAILBOX +--> | I2C-DW | SCL
| +---------+ / | |-------
| | | / +----------+
+---------| PSP |/
<- ACK | |
+---------+
The solution is similar to i2c-designware-baytrail.c implementation, where
we are using a generic i2c-designware-* driver with a small "wrapper".
In contrary to baytrail semaphore implementation, beside internal
acquire_lock() and release_lock() methods we are also applying quirks to
lock_bus() and unlock_bus() global adapter methods. With this in place
all i2c clients drivers may lock i2c bus for a desired number of i2c
transactions (e.g. write-wait-read) without being aware of that such bus
is shared with another entity.
Modify i2c_dw_probe_lock_support() to select correct semaphore
implementation at runtime, since now we have more than one available.
Configure new matching ACPI ID "AMDI0019" and register
ARBITRATION_SEMAPHORE flag in order to distinguish setup with PSP
arbitration.
Add myself as a reviewer for I2C DesignWare in order to help with reviewing
and testing possible changes touching new i2c-designware-amdpsp.c module.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
[wsa: removed unneeded blank line and curly braces]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
All accesses to controller's registers should be protected on
probe, disable and xfer paths. This is needed for i2c bus controllers
that are shared with but not controller by kernel.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Enable EFCH MMIO using check for SMBus PCI revision ID value 0x51 or
greater. This PCI revision ID check will enable family 17h and future
AMD processors with the same EFCH SMBus controller HW.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
AMD processors include registers capable of selecting between 2 SMBus
ports. Port selection is made during each user access by writing to
FCH::PM::DECODEEN[smbus0sel]. Change the driver to use MMIO during
SMBus port selection because cd6h/cd7h port I/O is not available on
later AMD processors.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The EFCH SMBus controller's base address is determined using details in
FCH::PM::DECODEEN[smbusasfiobase] and FCH::PM::DECODEEN[smbusasfioen].These
register fields were accessed using cd6h/cd7h port I/O. cd6h/cd7h port I/O
is no longer available in later AMD processors. Change base address
detection to use MMIO instead of port I/O cd6h/cd7h.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
EFCH cd6h/cd7h port I/O may no longer be available on later AMD
processors and it is recommended to use MMIO instead. Update the
request and release functions to support MMIO.
MMIO request/release and mmapping require details during cleanup.
Add a MMIO configuration structure containing resource and vaddress
details for mapping the region, accessing the region, and releasing
the region.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
[wsa: rebased after fixup in previous patch]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Move port selection code into a separate function. Refactor is in
preparation for following MMIO changes.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Move SMBus controller base address detection into function. Refactor
is in preparation for following MMIO changes.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Move duplicated region request and release code into a function. Move is
in preparation for following MMIO changes.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
[wsa: added missing curly brace]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Replace number constant with #define to improve readability and
maintainability.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The comments in this driver have a few typos. Let's fix them.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: tali.perry@nuvoton.com
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Replace acpi_bus_get_device() that is going to be dropped with
acpi_fetch_acpi_dev().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The CLKT register contains at poweron 0x40, which at our typical 100kHz
bus rate means .64ms. But there is no specified limit to how long devices
should be able to stretch the clocks, so just disable the timeout. We
still have a timeout wrapping the entire transfer.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
BugLink: https://github.com/raspberrypi/linux/issues/3064
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Some resource should be released if an error occurs in
'bcm2835_i2c_probe()'.
Add an error handling path and the needed 'clk_disable_unprepare()' and
'clk_rate_exclusive_put()' calls.
While at it, rework the bottom of the function to use this newly added
error handling path and have an explicit and more standard "return 0;" at
the end of the normal path.
Fixes: bebff81fb8 ("i2c: bcm2835: Model Divider in CCF")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[wsa: rebased]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
As stated in [1], dma_set_mask() with a 64-bit mask never fails if
dev->dma_mask is non-NULL. So, if it fails, the 32 bits case will also
fail for the same reason.
Simplify code and remove some dead code accordingly.
[1]: https://lkml.org/lkml/2021/6/7/398
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Nehal Bakulchandra Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The i2c-controller on the Cherry Trail - Whiskey Cove PMIC is special
in that it is always connected to the I2C charger IC of the board on
which the PMIC is used; and the charger IC is not described in ACPI,
so the i2c-cht-wc code needs to instantiate an i2c-client for it itself.
So far this was hardcoded to instantiate an i2c-client for the
bq24292i, with all properties, etc. set to match how this charger
is used on the GPD win and GPD pocket devices.
There is a rudimentary check to make sure the ACPI tables are at least
somewhat as expected, but this is far from accurate, leading to
a wrong i2c-client being instantiated for the charger on some boards.
Switch to the new DMI based intel_cht_wc_get_model() helper which is
exported by the MFD driver for the CHT Whiskey Cove PMIC to help PMIC
cell drivers like the i2c-cht-wc code reliably detect which board
they are running on.
And add board_info for the charger ICs as found on the other 2 known
boards with a Whisky Cove PMIC.
This has been tested on all 3 known boards.
Acked-by: Wolfram Sang <wsa@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add i2c compatible for MT8186. Compare to MT8192 i2c controller,
MT8186 doesn't need handshake signal witch apdma.
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Change of_*() functions to device_*() for firmware agnostic usage.
This allows to have the smbus_alert interrupt without any changes
in the controller drivers using the ACPI table.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
partial support for < MAX_ORDER - 1 granularity for virtio-mem
driver_override for vdpa
sysfs ABI documentation for vdpa
multiqueue config support for mlx5 vdpa
Misc fixes, cleanups.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmHiDHkPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpVT4H/3Veixt3uYPOmuLU2tSx+8X+sFTtik81hyiE
okz5fRJrxxA8SqS76FnmO10FS4hlPOGNk0Z5WVhr0yihwFvPLvpCM/xi2Lmrz9I7
pB0sXOIocEL1xApsxukR9K1Twpb2hfYsflbJYUVlRfhS5G0izKJNZp5I7OPrzd80
vVNNDWKW2iLDlfqsavumI4Kvm4nsFuCHG03jzMtcIa7YTXYV3DORD4ZGFFVUOIQN
t5F74TznwHOeYgJeg7TzjFjfPWmXjLetvx10QX1A1uOvwppWW/QY6My0UafTXNXj
VB3gOwJPf+gxXAXl/4bafq4NzM0xys6cpcPpjvhmU+erY4UuyAU=
=Y1eO
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes.
- partial support for < MAX_ORDER - 1 granularity for virtio-mem
- driver_override for vdpa
- sysfs ABI documentation for vdpa
- multiqueue config support for mlx5 vdpa
- and misc fixes, cleanups"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits)
vdpa/mlx5: Fix tracking of current number of VQs
vdpa/mlx5: Fix is_index_valid() to refer to features
vdpa: Protect vdpa reset with cf_mutex
vdpa: Avoid taking cf_mutex lock on get status
vdpa/vdpa_sim_net: Report max device capabilities
vdpa: Use BIT_ULL for bit operations
vdpa/vdpa_sim: Configure max supported virtqueues
vdpa/mlx5: Report max device capabilities
vdpa: Support reporting max device capabilities
vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps()
vdpa: Add support for returning device configuration information
vdpa/mlx5: Support configuring max data virtqueue
vdpa/mlx5: Fix config_attr_mask assignment
vdpa: Allow to configure max data virtqueues
vdpa: Read device configuration only if FEATURES_OK
vdpa: Sync calls set/get config/status with cf_mutex
vdpa/mlx5: Distribute RX virtqueues in RQT object
vdpa: Provide interface to read driver features
vdpa: clean up get_config_size ret value handling
virtio_ring: mark ring unused on error
...
This will enable cleanups down the road.
The idea is to disable cbs, then add "flush_queued_cbs" callback
as a parameter, this way drivers can flush any work
queued after callbacks have been disabled.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20211013105226.20225-1-mst@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pull i2c updates from Wolfram Sang:
"Mostly driver updates and refactorization.
The removal of the XLR driver and the i801 refactoring stand out a
little. In the core, we enabled async suspend/resume for I2C
controllers and their clients. No issues were reported during the test
phase in -next. We will see how this goes for mainline"
* 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (54 commits)
i2c: sh_mobile: remove unneeded semicolon
i2c: riic: Use platform_get_irq() to get the interrupt
i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
i2c: bcm2835: Use platform_get_irq() to get the interrupt
i2c: aspeed: Remove unused includes
dt-bindings: i2c: aspeed: Drop stray '#interrupt-cells'
i2c: sh_mobile: update to new DMAENGINE API when terminating
i2c: rcar: update to new DMAENGINE API when terminating
i2c: exynos5: Fix getting the optional clock
i2c: designware-pci: Convert to use dev_err_probe()
i2c: designware-pci: use __maybe_unused for PM functions
i2c: designware-pci: Group MODULE_*() macros
i2c: designware-pci: Add a note about struct dw_scl_sda_cfg usage
i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters
i2c: designware: Do not complete i2c read without RX_FULL interrupt
eeprom: at24: Add support for 24c1025 EEPROM
dt-bindings: at24: add at24c1025
i2c: tegra: use i2c_timings for bus clock freq
dt-bindings: at24: Rework special case compatible handling
i2c: i801: Don't clear status flags twice in interrupt mode
...
Eliminate the following coccicheck warning:
./drivers/i2c/busses/i2c-sh_mobile.c:849:3-4: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
- Update ACPICA code in the kernel to the 20211217 upstream release
including the following changes:
* iASL/Disassembler: Additional support for NHLT table (Bob Moore).
* Change a return_ACPI_STATUS (AE_BAD_PARAMETER) (Bob Moore).
* Fix a couple of warnings under MSVC (Bob Moore).
* iASL: Add TDEL table to both compiler/disassembler (Bob Moore).
* iASL/NHLT table: "Specific Data" field support (Bob Moore).
* Use original data_table_region pointer for accesses (Jessica
Clarke).
* Use original pointer for virtual origin tables (Jessica Clarke).
* Macros: Remove ACPI_PHYSADDR_TO_PTR (Jessica Clarke).
* Avoid subobject buffer overflow when validating RSDP signature
(Jessica Clarke).
* iASL: Add suppport for AGDI table (Ilkka Koskinen).
* Hardware: Do not flush CPU cache when entering S4 and S5 (Kirill
A. Shutemov).
* Expand the ACPI_ACCESS_ definitions (Mark Langsdorf).
* Utilities: Avoid deleting the same object twice in a row (Rafael
Wysocki).
* Executer: Fix REFCLASS_REFOF case in acpi_ex_opcode_1A_0T_1R()
(Rafael Wysocki).
* Fix AEST Processor generic resource substructure data field byte
length (Shuuichirou Ishii).
* Fix wrong interpretation of PCC address (Sudeep Holla).
* Add support for PCC Opregion special context data (Sudeep Holla).
- Implement OperationRegion handler for PCC Type 3 subtype (Sudeep
Holla).
- Introduce acpi_fetch_acpi_dev() as a replacement for
acpi_bus_get_device() and use it in the ACPI subsystem (Rafael
Wysocki).
- Avoid using _CID for device enumaration if _HID is missing or
invalid (Rafael Wysocki).
- Rework quirk handling during ACPI device enumeration and add some
new quirks for known broken platforms (Hans de Goede).
- Avoid unnecessary or redundant CPU cache flushing during system
PM transitions (Kirill A. Shutemov).
- Add PM debug messages related to power resources (Rafael Wysocki).
- Fix kernel-doc comment in the PCI host bridge ACPI driver (Yang Li).
- Rework flushing of EC work while suspended to idle and clean up
the handling of events in the ACPI EC driver (Rafael Wysocki).
- Prohibit ec_sys module parameter write_support from being used
when the system is locked down (Hans de Goede).
- Make the ACPI processor thermal driver use cpufreq_cpu_get() to
check for presence of cpufreq policy (Manfred Spraul).
- Avoid unnecessary CPU cache flushing in the ACPI processor idle
driver (Kirill A. Shutemov).
- Replace kernel.h with the necessary inclusions in the ACPI
processor driver (Andy Shevchenko).
- Use swap() instead of open coding it in the ACPI processor idle
driver (Guo Zhengkui).
- Fix the handling of defective LPAT in the ACPI xpower PMIC driver
and clean up some definitions of PMIC data structures (Hans de
Goede).
- Fix outdated comment in the ACPI DPTF driver (Sumeet Pawnikar).
- Add AEST to the list of known ACPI table signatures (Shuuichirou
Ishii).
- Make ACPI NUMA code take hotpluggable memblocks into account when
CONFIG_MEMORY_HOTPLUG is not set (Vitaly Kuznetsov).
- Use default_groups in kobj_type in the ACPI sysfs code (Greg
Kroah-Hartman).
- Rearrange _CPC structure documentation (Andy Shevchenko).
- Drop an always true check from the ACPI thermal driver (Adam
Borowski).
- Add new "not charging" quirk for Lenovo ThinkPads to the ACPI
battery driver (Thomas Weißschuh).
-----BEGIN PGP SIGNATURE-----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=IGwJ
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These are usual ACPICA code updates (although there are more of them
than in the last few releases), a noticeable EC driver update (which
mostly consists of cleanups, though), the device enumeration quirks
handling rework from Hans, some updates eliminating unnecessary CPU
cache flushing in some places (processor idle and system-wide PM code)
and a bunch of assorted cleanups and fixes.
Specifics:
- Update ACPICA code in the kernel to the 20211217 upstream release
including the following changes:
- iASL/Disassembler: Additional support for NHLT table (Bob
Moore).
- Change a return_ACPI_STATUS (AE_BAD_PARAMETER) (Bob Moore).
- Fix a couple of warnings under MSVC (Bob Moore).
- iASL: Add TDEL table to both compiler/disassembler (Bob Moore).
- iASL/NHLT table: "Specific Data" field support (Bob Moore).
- Use original data_table_region pointer for accesses (Jessica
Clarke).
- Use original pointer for virtual origin tables (Jessica Clarke).
- Macros: Remove ACPI_PHYSADDR_TO_PTR (Jessica Clarke).
- Avoid subobject buffer overflow when validating RSDP signature
(Jessica Clarke).
- iASL: Add suppport for AGDI table (Ilkka Koskinen).
- Hardware: Do not flush CPU cache when entering S4 and S5 (Kirill
A. Shutemov).
- Expand the ACPI_ACCESS_ definitions (Mark Langsdorf).
- Utilities: Avoid deleting the same object twice in a row (Rafael
Wysocki).
- Executer: Fix REFCLASS_REFOF case in acpi_ex_opcode_1A_0T_1R()
(Rafael Wysocki).
- Fix AEST Processor generic resource substructure data field byte
length (Shuuichirou Ishii).
- Fix wrong interpretation of PCC address (Sudeep Holla).
- Add support for PCC Opregion special context data (Sudeep
Holla).
- Implement OperationRegion handler for PCC Type 3 subtype (Sudeep
Holla).
- Introduce acpi_fetch_acpi_dev() as a replacement for
acpi_bus_get_device() and use it in the ACPI subsystem (Rafael
Wysocki).
- Avoid using _CID for device enumaration if _HID is missing or
invalid (Rafael Wysocki).
- Rework quirk handling during ACPI device enumeration and add some
new quirks for known broken platforms (Hans de Goede).
- Avoid unnecessary or redundant CPU cache flushing during system PM
transitions (Kirill A. Shutemov).
- Add PM debug messages related to power resources (Rafael Wysocki).
- Fix kernel-doc comment in the PCI host bridge ACPI driver (Yang
Li).
- Rework flushing of EC work while suspended to idle and clean up the
handling of events in the ACPI EC driver (Rafael Wysocki).
- Prohibit ec_sys module parameter write_support from being used when
the system is locked down (Hans de Goede).
- Make the ACPI processor thermal driver use cpufreq_cpu_get() to
check for presence of cpufreq policy (Manfred Spraul).
- Avoid unnecessary CPU cache flushing in the ACPI processor idle
driver (Kirill A. Shutemov).
- Replace kernel.h with the necessary inclusions in the ACPI
processor driver (Andy Shevchenko).
- Use swap() instead of open coding it in the ACPI processor idle
driver (Guo Zhengkui).
- Fix the handling of defective LPAT in the ACPI xpower PMIC driver
and clean up some definitions of PMIC data structures (Hans de
Goede).
- Fix outdated comment in the ACPI DPTF driver (Sumeet Pawnikar).
- Add AEST to the list of known ACPI table signatures (Shuuichirou
Ishii).
- Make ACPI NUMA code take hotpluggable memblocks into account when
CONFIG_MEMORY_HOTPLUG is not set (Vitaly Kuznetsov).
- Use default_groups in kobj_type in the ACPI sysfs code (Greg
Kroah-Hartman).
- Rearrange _CPC structure documentation (Andy Shevchenko).
- Drop an always true check from the ACPI thermal driver (Adam
Borowski).
- Add new "not charging" quirk for Lenovo ThinkPads to the ACPI
battery driver (Thomas Weißschuh)"
* tag 'acpi-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
ACPI: PCC: Implement OperationRegion handler for the PCC Type 3 subtype
ACPI / x86: Skip AC and battery devices on x86 Android tablets with broken DSDTs
ACPI / x86: Introduce an acpi_quirk_skip_acpi_ac_and_battery() helper
ACPI: processor: thermal: avoid cpufreq_get_policy()
serdev: Do not instantiate serdevs on boards with known bogus DSDT entries
i2c: acpi: Do not instantiate I2C-clients on boards with known bogus DSDT entries
ACPI / x86: Add acpi_quirk_skip_[i2c_client|serdev]_enumeration() helpers
ACPI: scan: Create platform device for BCM4752 and LNV4752 ACPI nodes
PCI/ACPI: Fix acpi_pci_osc_control_set() kernel-doc comment
ACPI: battery: Add the ThinkPad "Not Charging" quirk
ACPI: sysfs: use default_groups in kobj_type
ACPICA: Update version to 20211217
ACPICA: iASL/NHLT table: "Specific Data" field support
ACPICA: iASL: Add suppport for AGDI table
ACPICA: iASL: Add TDEL table to both compiler/disassembler
ACPICA: Fixed a couple of warnings under MSVC
ACPICA: Change a return_ACPI_STATUS (AE_BAD_PARAMETER)
ACPICA: Hardware: Do not flush CPU cache when entering S4 and S5
ACPICA: Add support for PCC Opregion special context data
ACPICA: Fix wrong interpretation of PCC address
...
-----BEGIN PGP SIGNATURE-----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=cCwW
-----END PGP SIGNATURE-----
Merge tag 'media/v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New sensor driver: ov5693
- A new driver for STM32 Chrom-ART Accelerator
- Added V4L2 core helper functions for VP9 codec
- Hantro driver has gained support for VP9 codecs
- Added support for Maxim MAX96712 Quad GMSL2 Deserializer
- The staging atomisp driver has gained lots of improvements, fixes and
cleanups. It now works with userptr
- Lots of random driver improvements as usual
* tag 'media/v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (397 commits)
media: ipu3-cio2: Add support for instantiating i2c-clients for VCMs
media: ipu3-cio2: Call cio2_bridge_init() before anything else
media: ipu3-cio2: Defer probing until the PMIC is fully setup
media: hantro: Add support for Allwinner H6
media: dt-bindings: allwinner: document H6 Hantro G2 binding
media: hantro: Convert imx8m_vpu_g2_irq to helper
media: hantro: move postproc enablement for old cores
media: hantro: vp9: add support for legacy register set
media: hantro: vp9: use double buffering if needed
media: hantro: add support for reset lines
media: hantro: Fix probe func error path
media: i2c: hi846: use pm_runtime_force_suspend/resume for system suspend
media: i2c: hi846: check return value of regulator_bulk_disable()
media: hi556: Support device probe in non-zero ACPI D state
media: ov5675: Support device probe in non-zero ACPI D state
media: imx208: Support device probe in non-zero ACPI D state
media: ov2740: support device probe in non-zero ACPI D state
media: ov5670: Support device probe in non-zero ACPI D state
media: ov8856: support device probe in non-zero ACPI D state
media: ov8865: Disable only enabled regulators on error path
...
These are all minor bug fixes and cleanups to code in arch/arm and
arch/arm64 that is specific to one SoC, updating Kconfig symbols,
the MAINTAINERS file, and removing some dead code.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmHDpXoACgkQmmx57+YA
GNlCwBAApX4cCczBVOmnmYnqQG5aO9dejSkN1zbL4S1htTj2BakPxnSJLlL3ttFW
gGU9vPKnUQbJ7anTZz7gjNC5ms/ARAHvj5Jhh/CmjPIM7qKIzMRj2y6dnI5Ax8D+
+MWBGU4yPlC5oTeGRrnzfcgzn10tJFHs+HfEYPOjqnmnyqem7QDDwhjSPdbZhvy3
wk0jmp6MOs6oX3WPJJYTkydEYyhBRCNWm52wUbQH2uCfVt5gonooWkYcki156hKd
V1Q/cHK7Kn2PqDrOwj9MXTPkdaaQW7FC7T3FEw1tZhp/k5u/pvyGE4TlAQULLv2y
lugKc3sqAPCgRBvwVSzkn2E6UCYMUH7W3lMBHbfmMR/qpo3VBCr8+2EofskkJl7e
1fZBriHzh3CEaCUmdb7cqvT6T2p1liB18EmH2i+YxRv/UsrWRcXjLrv0VjLGSZPM
VXMZzJpoNhYwS+b/TlRTyJLPJKHEfgAOObLzr5wXGjxXL6088nENY3K0Wkfuw9Tb
1BrFw/NyC8JDO+GJGVXCjPMELgFlfLN+feS8cMlR45ZalOPd+AQtwqkXGEx41Pjq
jJhS/A5a6IIJ6dLgsW+ncVpCUL+Jxmf+JV7b2e7p/KvavQHQq6cI/wkmd6pMInlw
hvkydpLh88SWuI1fNFoS04eCfkya6w29pQo0pGlsbPiyRjP/vYI=
=8wnp
-----END PGP SIGNATURE-----
Merge tag 'soc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"These are all minor bug fixes and cleanups to code in arch/arm and
arch/arm64 that is specific to one SoC, updating Kconfig symbols, the
MAINTAINERS file, and removing some dead code"
* tag 'soc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: exynos: Enable Exynos Multi-Core Timer driver
ARM: ixp4xx: remove unused header file pata_ixp4xx_cf.h
ARM: ixp4xx: remove dead configs CPU_IXP43X and CPU_IXP46X
MAINTAINERS: Add Florian as BCM5301X and BCM53573 maintainer
ARM: samsung: Remove HAVE_S3C2410_I2C and use direct dependencies
ARM: imx: rename DEBUG_IMX21_IMX27_UART to DEBUG_IMX27_UART
ARM: imx: remove dead left-over from i.MX{27,31,35} removal
ARM: s3c: add one more "fallthrough" statement in Jive
ARM: s3c: include header for prototype of s3c2410_modify_misccr
ARM: shmobile: rcar-gen2: Add missing of_node_put()
Merge ACPI device enumeration updates, ACPI power management updates
and PCI host bridge ACPI driver updates for 5.17-rc1:
- Introduce acpi_fetch_acpi_dev() as a replacement for
acpi_bus_get_device() and use it in the ACPI subsystem (Rafael
Wysocki).
- Avoid using _CID for device enumaration if _HID is missing or
invalid (Rafael Wysocki).
- Rework quirk handling during ACPI device enumeration and add some
new quirks for known broken platforms (Hans de Goede).
- Avoid unnecessary or redundant CPU cache flushing during system
PM transitions (Kirill A. Shutemov).
- Add PM debug messages related to power resources (Rafael Wysocki).
- Fix kernel-doc comment in the PCI host bridge ACPI driver (Yang Li).
* acpi-scan:
serdev: Do not instantiate serdevs on boards with known bogus DSDT entries
i2c: acpi: Do not instantiate I2C-clients on boards with known bogus DSDT entries
ACPI / x86: Add acpi_quirk_skip_[i2c_client|serdev]_enumeration() helpers
ACPI: scan: Create platform device for BCM4752 and LNV4752 ACPI nodes
ACPI: Use acpi_fetch_acpi_dev() instead of acpi_bus_get_device()
ACPI: scan: Introduce acpi_fetch_acpi_dev()
ACPI: scan: Do not add device IDs from _CID if _HID is not valid
* acpi-pm:
ACPI: PM: Remove redundant cache flushing
ACPI: PM: Avoid CPU cache flush when entering S4
* acpi-power:
ACPI: PM: Emit debug messages when enabling/disabling wakeup power
* acpi-pci:
PCI/ACPI: Fix acpi_pci_osc_control_set() kernel-doc comment
This largely reverts commit 5a7b95fb99. It
breaks suspend with AMD GPUs, and we couldn't incrementally fix it. So,
let's remove the code and go back to the drawing board. We keep the
header extension to not break drivers already populating the regulator.
We expect to re-add the code handling it soon.
Fixes: 5a7b95fb99 ("i2c: core: support bus regulator controlling in adapter")
Reported-by: "Tareque Md.Hanif" <tarequemd.hanif@yahoo.com>
Link: https://lore.kernel.org/r/1295184560.182511.1639075777725@mail.yahoo.com
Reported-by: Konstantin Kharlamov <hi-angel@yandex.ru>
Link: https://lore.kernel.org/r/7143a7147978f4104171072d9f5225d2ce355ec1.camel@yandex.ru
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1850
Tested-by: "Tareque Md.Hanif" <tarequemd.hanif@yahoo.com>
Tested-by: Konstantin Kharlamov <hi-angel@yandex.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: <stable@vger.kernel.org> # 5.14+
When performing an I2C transfer where the last message was a write KASAN
would complain:
BUG: KASAN: slab-out-of-bounds in mpc_i2c_do_action+0x154/0x630
Read of size 2 at addr c814e310 by task swapper/2/0
CPU: 2 PID: 0 Comm: swapper/2 Tainted: G B 5.16.0-rc8 #1
Call Trace:
[e5ee9d50] [c08418e8] dump_stack_lvl+0x4c/0x6c (unreliable)
[e5ee9d70] [c02f8a14] print_address_description.constprop.13+0x64/0x3b0
[e5ee9da0] [c02f9030] kasan_report+0x1f0/0x204
[e5ee9de0] [c0c76ee4] mpc_i2c_do_action+0x154/0x630
[e5ee9e30] [c0c782c4] mpc_i2c_isr+0x164/0x240
[e5ee9e60] [c00f3a04] __handle_irq_event_percpu+0xf4/0x3b0
[e5ee9ec0] [c00f3d40] handle_irq_event_percpu+0x80/0x110
[e5ee9f40] [c00f3e48] handle_irq_event+0x78/0xd0
[e5ee9f60] [c00fcfec] handle_fasteoi_irq+0x19c/0x370
[e5ee9fa0] [c00f1d84] generic_handle_irq+0x54/0x80
[e5ee9fc0] [c0006b54] __do_irq+0x64/0x200
[e5ee9ff0] [c0007958] __do_IRQ+0xe8/0x1c0
[c812dd50] [e3eaab20] 0xe3eaab20
[c812dd90] [c0007a4c] do_IRQ+0x1c/0x30
[c812dda0] [c0000c04] ExternalInput+0x144/0x160
--- interrupt: 500 at arch_cpu_idle+0x34/0x60
NIP: c000b684 LR: c000b684 CTR: c0019688
REGS: c812ddb0 TRAP: 0500 Tainted: G B (5.16.0-rc8)
MSR: 00029002 <CE,EE,ME> CR: 22000488 XER: 20000000
GPR00: c10ef7fc c812de90 c80ff200 c2394718 00000001 00000001 c10e3f90 00000003
GPR08: 00000000 c0019688 c2394718 fc7d625b 22000484 00000000 21e17000 c208228c
GPR16: e3e99284 00000000 ffffffff c2390000 c001bac0 c2082288 c812df60 c001ba60
GPR24: c23949c0 00000018 00080000 00000004 c80ff200 00000002 c2348ee4 c2394718
NIP [c000b684] arch_cpu_idle+0x34/0x60
LR [c000b684] arch_cpu_idle+0x34/0x60
--- interrupt: 500
[c812de90] [c10e3f90] rcu_eqs_enter.isra.60+0xc0/0x110 (unreliable)
[c812deb0] [c10ef7fc] default_idle_call+0xbc/0x230
[c812dee0] [c00af0e8] do_idle+0x1c8/0x200
[c812df10] [c00af3c0] cpu_startup_entry+0x20/0x30
[c812df20] [c001e010] start_secondary+0x5d0/0xba0
[c812dff0] [c00028a0] __secondary_start+0x90/0xdc
This happened because we would overrun the i2c->msgs array on the final
interrupt for the I2C STOP. This didn't happen if the last message was a
read because there is no interrupt in that case. Ensure that we only
access the current message if we are not processing a I2C STOP
condition.
Fixes: 1538d82f46 ("i2c: mpc: Interrupt driven transfer")
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_optional() for DT users only.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Wrong user data may cause warning in i2c_transfer(), ex: zero msgs.
Userspace should not be able to trigger warnings, so this patch adds
validation checks for user data in compact ioctl to prevent reported
warnings
Reported-and-tested-by: syzbot+e417648b303855b91d8a@syzkaller.appspotmail.com
Fixes: 7d5cb45655 ("i2c compat ioctls: move to ->compat_ioctl()")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
x86 ACPI devices which ship with only Android as their factory image
usually declare a whole bunch of bogus I2C devices in their ACPI tables.
Instantiating I2C clients for these bogus devices causes various issues,
e.g. GPIO/IRQ resource conflicts because sometimes drivers do bind to them.
The Android x86 kernel fork shipped on these devices has some special code
to remove these bogus devices, instead of just fixing the DSDT <sigh>.
Use the new acpi_quirk_skip_i2c_client_enumeration() helper to identify
known boards / acpi devices with this issue, and skip enumerating these.
Note these boards typically do actually have I2C devices, just
different ones then the ones described in their DSDT. The devices
which are actually present are manually instantiated by the
drivers/platform/x86/x86-android-tablets.c kernel module.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
No symbols from the linux/irqchip/chained_irq.h and linux/irqdomain.h
headers are used in the driver, so they can be removed.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
dmaengine_terminate_all() is deprecated. When converting the existing
calls, it turned out that the termination in the DMA setup and callback
were superfluous and only a side effect of simply calling
rcar_i2c_cleanup_dma(). As either no DMA transfers have been submitted
yet or the last one has successfully completed, there is nothing to
terminate and we can leave it out. So, merge the DMA unmap and cleanup
function to save some code. Then, add a flag if the new cleanup function
needs to terminate DMA. This is only the case for the erorr handling in
the main thread, so we can finally switch from dmaengine_terminate_all()
to dmaengine_terminate_sync() here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
dmaengine_terminate_all() is deprecated. When converting the existing
calls, it turned out that the termination in the interrupt handlers was
superfluous and only a side effect of simply calling
rcar_i2c_cleanup_dma(). As either no DMA transfers have been submitted
yet or the last one has successfully completed, there is nothing to
terminate and we can leave it out. So, merge the DMA unmap and cleanup
function to save some code. Then, add a flag if the new cleanup function
needs to terminate DMA. This is only the case for the erorr handling in
the main thread, so we can finally switch from dmaengine_terminate_all()
to dmaengine_terminate_sync() here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
"hsi2c_pclk" clock is optional and may not be present for some SoCs
supported by this driver. Nevertheless, in case the clock is provided
but some error happens during its getting, that error should be handled
properly. Use devm_clk_get_optional() API for that. Also report possible
errors using dev_err_probe() to handle properly -EPROBE_DEFER error (if
clock provider is not ready by the time I2C probe function is executed).
Fixes: 697ad2490c ("i2c: exynos5: Add bus clock support")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
[wsa: fixed SHA1 of Fixes tag]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
It's fine to call dev_err_probe() in ->probe() when error code is known.
Convert the driver to use dev_err_probe().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Use __maybe_unused for PM functions instead of ifdeffery.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
For better maintenance group MODULE_*() macros together.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add a note about struct dw_scl_sda_cfg usage to discourage people
of using this structure on new platforms. Instead they should try
hard to put the needed information into firmware descriptions.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The data type of hcnt and lcnt in the struct dw_i2c_dev is of type u16.
It's better to have same data type in struct dw_scl_sda_cfg as well.
Reported-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Intel Keem Bay platform supports multi-master operations over same i2c
bus using Synopsys i2c DesignWare IP. When multi-masters initiate i2c
operation simultaneously in a loop, SCL line is stucked low forever
after few i2c operations. Following interrupt sequences are observed
in:
working case: TX_EMPTY, RX_FULL and STOP_DET
non working case: TX_EMPTY, STOP_DET, RX_FULL.
DW_apb_i2c stretches the SCL line when the TX FIFO is empty or when
RX FIFO is full. The DW_apb_i2c master will continue to hold the SCL
line LOW until RX FIFO is read.
Linux kernel i2c DesignWare driver does not handle above non working
sequence. TX_EMPTY, RX_FULL and STOP_DET routine execution are required
in sequence although RX_FULL interrupt is raised after STOP_DET by
hardware. Clear STOP_DET for the following conditions:
(STOP_DET ,RX_FULL, rx_outstanding)
Write Operation: (1, 0, 0)
Read Operation:
RX_FULL followed by STOP_DET: (0, 1, 1) -> (1, 0, 0)
STOP_DET followed by RX_FULL: (1, 0, 1) -> (1, 1, 0)
RX_FULL and STOP_DET together: (1, 1, 1)
Signed-off-by: Tamal Saha <tamal.saha@intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This branch contains 5.16-rc1 + the pending ACPI/i2c, tps68570 platform_data
and INT3472 driver patches.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmG6YLQUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zwGwf8Csb4wXyc3duBlnX/9jO9REDVKTN9
HhmU2KQm29g10dN2nlFXEOG16xAy8zt3BE7QwniL/R5sUsKTCAEugY8Aqq/4+lFA
vTU+YR9YqZFmEDGMfDngHeh9ZvSWIJS7IEXthxCkgGVhrd2Wl50jKTjVyq1RIDKv
a7B4fOhguFv95xRlnXK+yoVUU7zZPWAgxyCqV0E0JEi8aWE8Y483IRCzcDEyJeDa
HkgZLVwD9l3WQ4uZllVg1q5jfSprHwBa8dFxgcd6mOOYaKowiJ+GjnvnXOto5X72
zsODBJH15VzfVXF5cAqIvzN6nAFR8Mxieei+21iFyUD/Ps1vfWlodFHH2w==
=Q1N9
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-int3472-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 into media_tree
Signed tag for the immutable platform-drivers-x86-int3472 branch
This branch contains 5.16-rc1 + the pending ACPI/i2c, tps68570 platform_data
and INT3472 driver patches.
* tag 'platform-drivers-x86-int3472-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: int3472: Deal with probe ordering issues
platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell
platform/x86: int3472: Pass tps68470_clk_platform_data to the tps68470-regulator MFD-cell
platform/x86: int3472: Add get_sensor_adev_and_name() helper
platform/x86: int3472: Split into 2 drivers
platform_data: Add linux/platform_data/tps68470.h file
i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function
i2c: acpi: Use acpi_dev_ready_for_enumeration() helper
ACPI: delay enumeration of devices with a _DEP pointing to an INT3472 device
Change i2c_acpi_new_device() into i2c_acpi_new_device_by_fwnode() and
add a static inline wrapper providing the old i2c_acpi_new_device()
behavior.
This is necessary because in some cases we may only have access
to the fwnode / acpi_device and not to the matching physical-node
struct device *.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-4-hdegoede@redhat.com
The clk and regulator frameworks expect clk/regulator consumer-devices
to have info about the consumed clks/regulators described in the device's
fw_node.
To work around cases where this info is not present in the firmware tables,
which is often the case on x86/ACPI devices, both frameworks allow the
provider-driver to attach info about consumers to the clks/regulators
when registering these.
This causes problems with the probe ordering wrt drivers for consumers
of these clks/regulators. Since the lookups are only registered when the
provider-driver binds, trying to get these clks/regulators before then
results in a -ENOENT error for clks and a dummy regulator for regulators.
To ensure the correct probe-ordering the ACPI core has code to defer the
enumeration of consumers affected by this until the providers are ready.
Call the new acpi_dev_ready_for_enumeration() helper to avoid
enumerating / instantiating i2c-clients too early.
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-3-hdegoede@redhat.com
Maxime points out that the polling code in mpc_i2c_isr should use the
_atomic API because it is called in an irq context and that the
behaviour of the MCF bit is that it is 1 when the byte transfer is
complete. All of this means the original code was effectively a
udelay(100).
Fix this by using readb_poll_timeout_atomic() and removing the negation
of the break condition.
Fixes: 4a8ac5e45c ("i2c: mpc: Poll for MCF")
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Use i2c_timings struct and corresponding methods to get bus clock frequency
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In interrupt mode we clear the status flags twice, in the interrupt
handler and in i801_check_post(). Remove clearing the status flags
from i801_check_post() and handle polling mode by using the
SMBus unlocking write to also clear the status flags if still set.
To be precise: One could still argue that the status flags are
cleared twice in interrupt mode, but it comes for free.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
I see no need to read back the registers to verify that the bits
have actually been cleared. I can't imagine any scenario where
the bits would remain set after a write to them.
Whilst at it, change involved syslog messages to use pci_dbg() et al.
to simplify them.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
I2C controller chosen by I2C_EXYNOS5 config option is also suitable for
Exynos850 and ExynosAutoV9 SoCs. State that specifically in I2C_EXYNOS5
symbol help section.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In new Exynos SoCs (like Exynos850) where HSI2C is implemented as a
part of USIv2 block, there are two clocks provided to HSI2C controller:
- PCLK: bus clock (APB), provides access to register interface
- IPCLK: operating IP-core clock; SCL is derived from this one
Both clocks have to be asserted for HSI2C to be functional in that case.
Add code to obtain and enable/disable PCLK in addition to already
handled operating clock. Make it optional though, as older Exynos SoC
variants only have one HSI2C clock.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
ExynosAutoV9 functioning logic mostly follows I2C_TYPE_EXYNOS7, but
timing calculation and configuration procedure is changed: e.g. only
timing_s3 has to be set now.
Another change of HSI2C controller in ExynosAutoV9 SoC is that it's now
a part of USIv2 IP-core. No changes is needed for I2C driver though, as
all USI related configuration is done in USI driver.
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The driver currently assumes that the notify callback is only received
when the device is done with all the queued buffers.
However, this is not true, since the notify callback could be called
without any of the queued buffers being completed (for example, with
virtio-pci and shared interrupts) or with only some of the buffers being
completed (since the driver makes them available to the device in
multiple separate virtqueue_add_sgs() calls).
This can lead to incorrect data on the I2C bus or memory corruption in
the guest if the device operates on buffers which are have been freed by
the driver. (The WARN_ON in the driver is also triggered.)
BUG kmalloc-128 (Tainted: G W ): Poison overwritten
First byte 0x0 instead of 0x6b
Allocated in i2cdev_ioctl_rdwr+0x9d/0x1de age=243 cpu=0 pid=28
memdup_user+0x2e/0xbd
i2cdev_ioctl_rdwr+0x9d/0x1de
i2cdev_ioctl+0x247/0x2ed
vfs_ioctl+0x21/0x30
sys_ioctl+0xb18/0xb41
Freed in i2cdev_ioctl_rdwr+0x1bb/0x1de age=68 cpu=0 pid=28
kfree+0x1bd/0x1cc
i2cdev_ioctl_rdwr+0x1bb/0x1de
i2cdev_ioctl+0x247/0x2ed
vfs_ioctl+0x21/0x30
sys_ioctl+0xb18/0xb41
Fix this by calling virtio_get_buf() from the notify handler like other
virtio drivers and by actually waiting for all the buffers to be
completed.
Fixes: 3cfc883804 ("i2c: virtio: add a virtio i2c frontend driver")
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The log messages talk about 'bus recovery' while it is not a bus
recovery with 9 pulses but merely a controller reset. Controller resets
are not worth log messages. The 'bus busy' message should be emitted by
upper layers, a busy bus may be expected in some cases.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Reviewed-by: Alain Volmat <alain.volmat@foss.st.com>
Function stm32f7_i2c_release_bus is always returning 0, hence it
should be a void function. Update the function and remove the
return value error checking code in caller functions.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In a typical read transfer, start completion flag is being set after
read finishes (notice ipd bit 4 being set):
trasnfer poll=0
i2c start
rk3x-i2c fdd40000.i2c: IRQ: state 1, ipd: 10
i2c read
rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 1b
i2c stop
rk3x-i2c fdd40000.i2c: IRQ: state 4, ipd: 33
This causes I2C transfer being aborted in polled mode from a stop completion
handler:
trasnfer poll=1
i2c start
rk3x-i2c fdd40000.i2c: IRQ: state 1, ipd: 10
i2c read
rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 0
rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 1b
i2c stop
rk3x-i2c fdd40000.i2c: IRQ: state 4, ipd: 13
i2c stop
rk3x-i2c fdd40000.i2c: unexpected irq in STOP: 0x10
Clearing the START flag after read fixes the issue without any obvious
side effects.
This issue was dicovered on RK3566 when adding support for powering
off the RK817 PMIC.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This reverts commit e8578547ce. Drivers
should read these values from ACPI tables.
Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This reverts commit 36af188f79. Drivers
should read these values from ACPI tables.
Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
dmaengine_terminate_all() is deprecated in favor of explicitly saying if
it should be sync or async. Here, we use dmaengine_terminate_sync in
i2c_xfer and i2c_smbus_xfer handlers and rely on
dmaengine_terminate_async within interrupt handlers
(transmission error cases).
dmaengine_synchronize is added within i2c_xfer and i2c_smbus_xfer handler
to finalize terminate started in interrupt handlers.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In case of receiving a NACK, the dma transfer should be stopped
to avoid feeding data into the FIFO.
Also ensure to properly return the proper error code and avoid
waiting for the end of the dma completion in case of
error happening during the transmission.
Fixes: 7ecc8cfde5 ("i2c: i2c-stm32f7: Add DMA support")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When getting an access timeout, ensure that the bus is in a proper
state prior to returning the error.
Fixes: aeb068c572 ("i2c: i2c-stm32f7: add driver")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The platform data structures are used in the respective i801_add_tco
functions only. Therefore we can make the definitions local to these
functions.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Set optimal HCNT, LCNT and hold time values for all the speeds supported
in Intel Programmable Service Engine I2C controller in Intel Elkhart
Lake.
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add support to configure HCNT, LCNT values for Fast Mode Plus and High
Speed Mode.
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This enables the async suspend for i2c client devices. This reduces
the suspend/resume time considerably on platforms where i2c devices
can take a lot of time (hundreds of ms) to resume.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Signed-off-by: Rajat Jain <rajatja@google.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Enable async suspend/resume of i2c adapters. It enormously helps with
reducing the resume time of systems (as much as 20%-40%) where I2C devices
can take significant time (100s of ms) to resume.
Signed-off-by: Rajat Jain <rajatja@google.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Mark the designware devices for asynchronous suspend. With this, the
resume for designware devices does not get stuck behind other unrelated
devices (e.g. intel_backlight that takes hundreds of ms to resume,
waiting for its parent devices).
Signed-off-by: Rajat Jain <rajatja@google.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Current I2C reset procedure is broken in two ways:
1) It only generate 1 START instead of 9 STARTs and STOP.
2) It leaves the bus Busy so every I2C xfer after the first
fixup calls the reset routine again, for every xfer there after.
This fixes both errors.
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
While handling an error during transfer (ex: NACK), it could
happen that the driver has already written data into TXDR
before the transfer get stopped.
This commit add TXDR Flush after end of transfer in case of error to
avoid sending a wrong data on any other slave upon next transfer.
Fixes: aeb068c572 ("i2c: i2c-stm32f7: add driver")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
$ scripts/kernel-doc -none drivers/i2c/busses/i2c-designware-core.h
warning: Function parameter or member 'rst' not described in 'dw_i2c_dev'
warning: Function parameter or member 'get_clk_rate_khz' not described in 'dw_i2c_dev'
warning: Function parameter or member 'flags' not described in 'dw_i2c_dev'
warning: Function parameter or member 'functionality' not described in 'dw_i2c_dev'
warning: Function parameter or member 'master_cfg' not described in 'dw_i2c_dev'
warning: Function parameter or member 'set_sda_hold_time' not described in 'dw_i2c_dev'
warning: Function parameter or member 'rinfo' not described in 'dw_i2c_dev'
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Randy Dunlap <rdunla@infradead.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
clk_get_rate() is documented as requiring the clock to be enabled.
Ensure that the bus clock is enabled before calling clk_get_rate() in
rk3x_i2c_probe() to satisfy this requirement.
Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Reduce source code and code size by defining the chip features
statically.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
If FEATURE_BLOCK_BUFFER is set then bit SMBAUXCTL_E32B is supported
and there's no benefit in reading it back. Origin of this check
seems to be 14 yrs ago when people were not completely sure which
chip versions support the block buffer mode.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
If an invalid block size is provided, reject it instead of silently
changing it to a supported value. Especially critical I see the case of
a write transfer with block length 0. In this case we have no guarantee
that the byte we would write is valid. When silently reducing a read to
32 bytes then we don't return an error and the caller may falsely
assume that we returned the full requested data.
If this change should break any (broken) caller, then I think we should
fix the caller.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
CBUS transfers have always been atomic, but after commit 63b96983a5
("i2c: core: introduce callbacks for atomic transfers") we started to see
warnings during e.g. poweroff as the atomic callback is not explicitly set.
Fix that.
Fixes the following WARNING seen during Nokia N810 power down:
[ 786.570617] reboot: Power down
[ 786.573913] ------------[ cut here ]------------
[ 786.578826] WARNING: CPU: 0 PID: 672 at drivers/i2c/i2c-core.h:40 i2c_smbus_xfer+0x100/0x110
[ 786.587799] No atomic I2C transfer handler for 'i2c-2'
Fixes: 63b96983a5 ("i2c: core: introduce callbacks for atomic transfers")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add support for the ACPI based device registration so that the driver
can be also enabled through ACPI table.
This does not include the ACPI support for Tegra VI and DVC I2C.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Use array_size() helper to aid in 2-factor allocation instances.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
We have a special helper to get fwnode out of struct device.
Moreover, dereferencing it directly prevents the fwnode
modifications in the future.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Recently ACPI gained the acpi_get_local_address() API which may be used
instead of home grown i2c_mux_gpio_get_acpi_adr().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Most IMX I2C interfaces don't generate an interrupt on a stop condition,
so it won't generate a timely stop event on a slave mode transfer.
Some users, like IPMB, need a timely stop event to work properly.
So, add a timer and add the proper handling to generate a stop event in
slave mode if the interface goes idle.
Signed-off-by: Corey Minyard <minyard@acm.org>
Tested-by: Andrew Manley <andrew.manley@sealingtech.com>
Reviewed-by: Andrew Manley <andrew.manley@sealingtech.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
If a timeout is hit, it can result is incorrect data on the I2C bus
and/or memory corruptions in the guest since the device can still be
operating on the buffers it was given while the guest has freed them.
Here is, for example, the start of a slub_debug splat which was
triggered on the next transfer after one transfer was forced to timeout
by setting a breakpoint in the backend (rust-vmm/vhost-device):
BUG kmalloc-1k (Not tainted): Poison overwritten
First byte 0x1 instead of 0x6b
Allocated in virtio_i2c_xfer+0x65/0x35c age=350 cpu=0 pid=29
__kmalloc+0xc2/0x1c9
virtio_i2c_xfer+0x65/0x35c
__i2c_transfer+0x429/0x57d
i2c_transfer+0x115/0x134
i2cdev_ioctl_rdwr+0x16a/0x1de
i2cdev_ioctl+0x247/0x2ed
vfs_ioctl+0x21/0x30
sys_ioctl+0xb18/0xb41
Freed in virtio_i2c_xfer+0x32e/0x35c age=244 cpu=0 pid=29
kfree+0x1bd/0x1cc
virtio_i2c_xfer+0x32e/0x35c
__i2c_transfer+0x429/0x57d
i2c_transfer+0x115/0x134
i2cdev_ioctl_rdwr+0x16a/0x1de
i2cdev_ioctl+0x247/0x2ed
vfs_ioctl+0x21/0x30
sys_ioctl+0xb18/0xb41
There is no simple fix for this (the driver would have to always create
bounce buffers and hold on to them until the device eventually returns
the buffers), so just disable the timeout support for now.
Fixes: 3cfc883804 ("i2c: virtio: add a virtio i2c frontend driver")
Acked-by: Jie Deng <jie.deng@intel.com>
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Currently interrupt storm will occur from i2c-i801 after first
transaction if SMB_ALERT signal is enabled and ever asserted. It is
enough if the signal is asserted once even before the driver is loaded
and does not recover because that interrupt is not acknowledged.
This fix aims to fix it by two ways:
- Add acknowledging for the SMB_ALERT interrupt status
- Disable the SMB_ALERT interrupt on platforms where possible since the
driver currently does not make use for it
Acknowledging resets the SMB_ALERT interrupt status on all platforms and
also should help to avoid interrupt storm on older platforms where the
SMB_ALERT interrupt disabling is not available.
For simplicity this fix reuses the host notify feature for disabling and
restoring original register value.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=177311
Reported-by: ck+kernelbugzilla@bl4ckb0x.de
Reported-by: stephane.poignant@protonmail.com
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
If driver interrupts are enabled, SMBHSTCNT_INTREN will be 1 after
the first transaction, and will stay to that value forever. This
means that interrupts will be generated for both host-initiated
transactions and also SMBus Alert events even after the driver is
unloaded. To be on the safe side, we should restore the initial state
of this bit at suspend and reboot time, as we do for several other
configuration bits already and for the same reason: the BIOS should
be handed the device in the same configuration state in which we
received it. Otherwise interrupts may be generated which nobody
will process.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Commits 95b8a5e011 ("MIPS: Remove NETLOGIC support") and edd4488aea
("ARM: remove tango platform") removed Netlogic XLR and Sigma Designs
Tango platforms which means there are no platforms using the XLR I2C
driver and it can be removed.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Netlogic XLP was removed in commit 95b8a5e011 ("MIPS: Remove NETLOGIC
support"). With those gone, the single platform left to support is
Cavium ThunderX2. Remove the Netlogic variant and DT support.
For simplicity, the existing kconfig name is retained.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by George Cherian <gcherian@marvell.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
A separate Kconfig option HAVE_S3C2410_I2C for Samsung SoCs is not
really needed and the i2c-s3c24xx driver can depend on Samsung ARM
architectures instead. This also enables i2c-s3c2410 for arm64 Exynos
SoCs, which is required for example by Exynos850.
This is basically continuation of work made in following commits:
- commit d96890fca9 ("rtc: s3c: remove HAVE_S3C_RTC in favor of
direct dependencies")
- commit 7dd3cae90d ("ARM: samsung: remove HAVE_S3C2410_WATCHDOG and
use direct dependencies")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20211121150558.21801-2-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
- Add support for new ACPI device configuration object called _DSC
to allow certain devices to be probed without changing their power
states, document it and make two drivers use it (Sakari Ailus,
Rajmohan Mani).
- Fix device wakeup power reference counting broken recently by
mistake (Rafael Wysocki).
- Drop unused symbol and macros depending on it from acgcc.h (Rafael
Wysocki).
- Add HP ZHAN 66 Pro to the "no EC wakeup" quirk list (Binbin Zhou).
- Add Xiaomi Mi Pad 2 to the backlight quirk list and drop an unused
piece of data from all of the list entries (Hans de Goede).
- Fix register read accesses handling in the Intel PMIC operation
region driver (Hans de Goede).
- Clean up static variables initialization in the EC driver
(wangzhitong).
-----BEGIN PGP SIGNATURE-----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=k8+T
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These add support for a new ACPI device configuration object called
_DSC, fix some issues including one recent regression, add two new
items to quirk lists and clean up assorted pieces of code.
Specifics:
- Add support for new ACPI device configuration object called _DSC
("Deepest State for Configuration") to allow certain devices to be
probed without changing their power states, document it and make
two drivers use it (Sakari Ailus, Rajmohan Mani).
- Fix device wakeup power reference counting broken recently by
mistake (Rafael Wysocki).
- Drop unused symbol and macros depending on it from acgcc.h (Rafael
Wysocki).
- Add HP ZHAN 66 Pro to the "no EC wakeup" quirk list (Binbin Zhou).
- Add Xiaomi Mi Pad 2 to the backlight quirk list and drop an unused
piece of data from all of the list entries (Hans de Goede).
- Fix register read accesses handling in the Intel PMIC operation
region driver (Hans de Goede).
- Clean up static variables initialization in the EC driver
(wangzhitong)"
* tag 'acpi-5.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Documentation: ACPI: Fix non-D0 probe _DSC object example
ACPI: Drop ACPI_USE_BUILTIN_STDARG ifdef from acgcc.h
ACPI: PM: Fix device wakeup power reference counting error
ACPI: video: use platform backlight driver on Xiaomi Mi Pad 2
ACPI: video: Drop dmi_system_id.ident settings from video_detect_dmi_table[]
ACPI: PMIC: Fix intel_pmic_regs_handler() read accesses
ACPI: EC: Remove initialization of static variables to false
ACPI: EC: Use ec_no_wakeup on HP ZHAN 66 Pro
at24: Support probing while in non-zero ACPI D state
media: i2c: imx319: Support device probe in non-zero ACPI D state
ACPI: Add a convenience function to tell a device is in D0 state
Documentation: ACPI: Document _DSC object usage for enum power state
i2c: Allow an ACPI driver to manage the device's power state during probe
ACPI: scan: Obtain device's desired enumeration power state
Pull i2c updates from Wolfram Sang:
- big refactoring of the PASEMI driver to support the Apple M1
- huge improvements to the XIIC in terms of locking and SMP safety
- refactoring and clean ups for the i801 driver
... and the usual bunch of small driver updates
* 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (43 commits)
i2c: amd-mp2-plat: ACPI: Use ACPI_COMPANION() directly
i2c: i801: Add support for Intel Ice Lake PCH-N
i2c: virtio: update the maintainer to Conghui
i2c: xlr: Fix a resource leak in the error handling path of 'xlr_i2c_probe()'
i2c: qup: move to use request_irq by IRQF_NO_AUTOEN flag
i2c: qup: fix a trivial typo
i2c: tegra: Ensure that device is suspended before driver is removed
i2c: i801: Fix incorrect and needless software PEC disabling
i2c: mediatek: Dump i2c/dma register when a timeout occurs
i2c: mediatek: Reset the handshake signal between i2c and dma
i2c: mlxcpld: Allow flexible polling time setting for I2C transactions
i2c: pasemi: Set enable bit for Apple variant
i2c: pasemi: Add Apple platform driver
i2c: pasemi: Refactor _probe to use devm_*
i2c: pasemi: Allow to configure bus frequency
i2c: pasemi: Move common reset code to own function
i2c: pasemi: Split pci driver to its own file
i2c: pasemi: Split off common probing code
i2c: pasemi: Remove usage of pci_dev
i2c: pasemi: Use dev_name instead of port number
...
The ACPI_HANDLE() macro is a wrapper arond the ACPI_COMPANION()
macro and the ACPI handle produced by the former comes from the
ACPI device object produced by the latter, so it is way more
straightforward to evaluate the latter directly instead of passing
the handle produced by the former to acpi_bus_get_device().
Modify i2c_amd_probe() accordingly (no intentional functional impact).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add PCI ID of SMBus controller on Intel Ice Lake PCH-N.
The device can be found on MacBookPro16,2 [1].
[1]: https://linux-hardware.org/?probe=f1c5cf0c43
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
PTR_ERR should access the value just tested by IS_ERR, otherwise
the wrong error code will be returned.
Fixes: 7b6da7fe7b ("mailbox: pcc: Use PCC mailbox channel pointer instead of standard")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Here is the big set of driver core changes for 5.16-rc1.
All of these have been in linux-next for a while now with no reported
problems.
Included in here are:
- big update and cleanup of the sysfs abi documentation files
and scripts from Mauro. We are almost at the place where we
can properly check that the running kernel's sysfs abi is
documented fully.
- firmware loader updates
- dyndbg updates
- kernfs cleanups and fixes from Christoph
- device property updates
- component fix
- other minor driver core cleanups and fixes
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYYPbjQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ync9gCfXKMUI1GAnCfJWAwTdTcd18q5akoAoMw32/AH
0yh5TjAWFyFd7xz5d7qs
=itsC
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 5.16-rc1.
All of these have been in linux-next for a while now with no reported
problems.
Included in here are:
- big update and cleanup of the sysfs abi documentation files and
scripts from Mauro. We are almost at the place where we can
properly check that the running kernel's sysfs abi is documented
fully.
- firmware loader updates
- dyndbg updates
- kernfs cleanups and fixes from Christoph
- device property updates
- component fix
- other minor driver core cleanups and fixes"
* tag 'driver-core-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (122 commits)
device property: Drop redundant NULL checks
x86/build: Tuck away built-in firmware under FW_LOADER
vmlinux.lds.h: wrap built-in firmware support under FW_LOADER
firmware_loader: move struct builtin_fw to the only place used
x86/microcode: Use the firmware_loader built-in API
firmware_loader: remove old DECLARE_BUILTIN_FIRMWARE()
firmware_loader: formalize built-in firmware API
component: do not leave master devres group open after bind
dyndbg: refine verbosity 1-4 summary-detail
gpiolib: acpi: Replace custom code with device_match_acpi_handle()
i2c: acpi: Replace custom function with device_match_acpi_handle()
driver core: Provide device_match_acpi_handle() helper
dyndbg: fix spurious vNpr_info change
dyndbg: no vpr-info on empty queries
dyndbg: vpr-info on remove-module complete, not starting
device property: Add missed header in fwnode.h
Documentation: dyndbg: Improve cli param examples
dyndbg: Remove support for ddebug_query param
dyndbg: make dyndbg a known cli param
dyndbg: show module in vpr-info in dd-exec-queries
...
Hardening work by Jason
vdpa driver for Alibaba ENI
Performance tweaks for virtio blk
virtio rng rework using an internal buffer
mac/mtu programming for mlx5 vdpa
Misc fixes, cleanups
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmF/su8PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpo+sIAJjBTvbET+d0KuIMt8YBGsU+NWgHaJxW06hm
GHZzinueZYWaS20MPMYMPfcHUgigWj0kk7F0gMljG5rtDFzR85JkOi7+e5V6RVJW
8SQc7JjA1Krde6EiPJdlv3mVkLz/5VbrGUgjAW9di/O04Xc/jAc9kmJ41wTYr0mL
E5IsUi9QBmgHtKQ+2ofb9QEWuebJclGK+NVd3Kp08BtAQOrdn5UrIzY30/sjkZwE
ul2ll6v/k7T3dCQbHD/wMgfFycPvoZVfxaVj+FWQnwdWkqZwzMRmpKPRes4KJfww
Lfx1qox10mJzH7XJCs7xmOM8f7HgNNWi0gD5FxNlfkiz1AwHYOk=
=DTXY
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"vhost and virtio fixes and features:
- Hardening work by Jason
- vdpa driver for Alibaba ENI
- Performance tweaks for virtio blk
- virtio rng rework using an internal buffer
- mac/mtu programming for mlx5 vdpa
- Misc fixes, cleanups"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (45 commits)
vdpa/mlx5: Forward only packets with allowed MAC address
vdpa/mlx5: Support configuration of MAC
vdpa/mlx5: Fix clearing of VIRTIO_NET_F_MAC feature bit
vdpa_sim_net: Enable user to set mac address and mtu
vdpa: Enable user to set mac and mtu of vdpa device
vdpa: Use kernel coding style for structure comments
vdpa: Introduce query of device config layout
vdpa: Introduce and use vdpa device get, set config helpers
virtio-scsi: don't let virtio core to validate used buffer length
virtio-blk: don't let virtio core to validate used length
virtio-net: don't let virtio core to validate used length
virtio_ring: validate used buffer length
virtio_blk: correct types for status handling
virtio_blk: allow 0 as num_request_queues
i2c: virtio: Add support for zero-length requests
virtio-blk: fixup coccinelle warnings
virtio_ring: fix typos in vring_desc_extra
virtio-pci: harden INTX interrupts
virtio_pci: harden MSI-X interrupts
virtio_config: introduce a new .enable_cbs method
...
Enable drivers to tell ACPI that there's no need to power on a device for
probe. Drivers should still perform this by themselves if there's a need
to. In some cases powering on the device during probe is undesirable, and
this change enables a driver to choose what fits best for it.
Add a field called "flags" into struct i2c_driver for driver flags, and a
flag I2C_DRV_ACPI_WAIVE_D0_PROBE to tell a driver supports probe in ACPI D
states other than 0.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The virtio specification received a new mandatory feature
(VIRTIO_I2C_F_ZERO_LENGTH_REQUEST) for zero length requests. Fail if the
feature isn't offered by the device.
For each read-request, set the VIRTIO_I2C_FLAGS_M_RD flag, as required
by the VIRTIO_I2C_F_ZERO_LENGTH_REQUEST feature.
This allows us to support zero length requests, like SMBUS Quick, where
the buffer need not be sent anymore.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/7c58868cd26d2fc4bd82d0d8b0dfb55636380110.1634808714.git.viresh.kumar@linaro.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jie Deng <jie.deng@intel.com> # once the spec is merged
Now that we have all the shared memory region information populated in
the pcc_mbox_chan, let us propagate the pointer to the same as the
return value to pcc_mbox_request channel.
This eliminates the need for the individual users of PCC mailbox to
parse the PCCT subspace entries and fetch the shmem information. This
also eliminates the need for PCC mailbox controller to set con_priv to
PCCT subspace entries. This is required as con_priv is private to the
controller driver to attach private data associated with the channel and
not meant to be used by the mailbox client/users.
Let us convert all the users of pcc_mbox_{request,free}_channel to use
new interface.
Cc: Jean Delvare <jdelvare@suse.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
A successful 'clk_prepare()' call should be balanced by a corresponding
'clk_unprepare()' call in the error handling path of the probe, as already
done in the remove function.
More specifically, 'clk_prepare_enable()' is used, but 'clk_disable()' is
also already called. So just the unprepare step has still to be done.
Update the error handling path accordingly.
Fixes: 75d31c2372 ("i2c: xlr: add support for Sigma Designs controller variant")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable because of requesting.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Correct the typo of "reamining" to "remaining".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Tegra I2C device isn't guaranteed to be suspended after removal of
the driver since driver uses pm_runtime_put() that is asynchronous and
pm_runtime_disable() cancels pending power-change requests. This means
that potentially refcount of the clocks may become unbalanced after
removal of the driver. This a very minor problem which unlikely to
happen in practice and won't cause any visible problems, nevertheless
let's replace pm_runtime_disable() with pm_runtime_force_suspend() and
use pm_runtime_put_sync() which disables RPM of the device and puts it
into suspend before driver is removed.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Commit a6b8bb6a81 ("i2c: i801: Fix handling SMBHSTCNT_PEC_EN")
attempts to disable software PEC by clearing the SMBHSTCNT_PEC_EN (bit 7)
in the SMBus Host Control register (I/O SMBHSTCNT) but incorrectly
clears it in the PCI Host Configuration register (PCI SMBHSTCFG).
This clearing is actually needless since after above commit the
SMBHSTCNT_PEC_EN is never set and the register is initialized with known
values.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Since driver core provides a generic device_match_acpi_handle()
we may replace the custom one with it. This unifies code to find
an adapter with the similar one which finds a client.
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20211014134756.39092-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a timeout error occurs in i2c transter, it is usually related
to the i2c/dma IP hardware configuration. Therefore, the purpose of
this patch is to dump the key register values of i2c/dma when a
timeout occurs in i2c for debugging.
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Due to changes in the hardware design of the handshaking signal
between i2c and dma, it is necessary to reset the handshaking
signal before each transfer to ensure that the multi-msgs can
be transferred correctly.
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Allow polling time setting according to I2C frequency supported across
the system. For base frequency 400 KHz and 1 MHz set polling time is set
four times less than for system with base frequency 100KHz.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Some later revisions after the original PASemi I2C controller introduce
what likely is an enable bit to the CTL register. Without setting it the
actual i2c transmission is never started.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Olof Johansson <olof@lixom.net>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
With all the previous preparations we can now finally add
the platform driver to support the PASemi-based controllers
in Apple SoCs. This does not work on the M1 yet but should
work on the early iPhones already.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Olof Johansson <olof@lixom.net>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Using managed device resources means there's nothing left to be done in
pasemi_smb_pci_remove and also allows to remove base and size from
struct pasemi_smbus.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Olof Johansson <olof@lixom.net>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Right now the bus frequency has always been hardcoded as
100 KHz with the specific reference clock used in the PASemi
PCI controllers. Make this configurable to prepare for the
platform driver.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Olof Johansson <olof@lixom.net>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Split out common reset call to its own function so that we
can later add support for selecting the clock frequency
and an additional enable bit found in newer revisions.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Olof Johansson <olof@lixom.net>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Split off the PCI driver so that we can reuse common code for the
platform driver.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Olof Johansson <olof@lixom.net>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Split off common probing code that will be used by both the PCI and the
platform device.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Olof Johansson <olof@lixom.net>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Prepare to create a platform driver by removing all usages of pci_dev we
can.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Olof Johansson <olof@lixom.net>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Right now the i2c adapter name includes the port number which can
indirectly be used to identify the device. Replace that with dev_name
to directly identify the device and to also allow this to work correctly
once we add platform support.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Olof Johansson <olof@lixom.net>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In preparation for splitting this driver up into a platform_driver
and a pci_driver, replace outl/inl usage with pci_iomap and
ioread32/iowrite32.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Olof Johansson <olof@lixom.net>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Decrease polling time 'MLXCPLD_I2C_POLL_TIME' from 400 usec to 200
usec. It improves performance of I2C transactions.
Reliability of setting polling time to 200 usec has been validated
across all the supported systems.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Change setting for 400KHz frequency support by more accurate value.
Fixes: 66b0c2846b ("i2c: mlxcpld: Add support for I2C bus frequency setting")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Value for getting frequency capability wrongly has been taken from
register offset instead of register value.
Fixes: 66b0c2846b ("i2c: mlxcpld: Add support for I2C bus frequency setting")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Describe better which driver applies to which SoC, to make configuring
kernel for Samsung SoC easier.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The MODULE_DEVICE_TABLE already creates proper alias for platform
driver. Having another MODULE_ALIAS causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In the commit be5ce0e97c ("i2c: mediatek: Add i2c ac-timing adjust
support"), we miss setting OFFSET_EXT_CONF register if
i2c->dev_comp->timing_adjust is false, now add it back.
Fixes: be5ce0e97c ("i2c: mediatek: Add i2c ac-timing adjust support")
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
acpi_i2c_find_adapter_by_handle() calls bus_find_device() which takes a
reference on the adapter which is never released which will result in a
reference count leak and render the adapter unremovable. Make sure to
put the adapter after creating the client in the same manner that we do
for OF.
Fixes: 525e6fabea ("i2c / ACPI: add support for ACPI reconfigure notifications")
Signed-off-by: Jamie Iles <quic_jiles@quicinc.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[wsa: fixed title]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The reason for the modification here is that the previous
offset information is incorrect, OFFSET_DEBUGSTAT = 0xE4 is
the correct value.
Fixes: 25708278f8 ("i2c: mediatek: Add i2c support for MediaTek MT8183")
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Warn users that class based instantiation is going away soon in favour
of more robust probing and faster bootup times.
Class based instantiation has already been removed for other controllers
and it makes absolutely sense to do it for this one too.
Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
Acked-by: Ingmar Klein <ingmar.klein@kontron.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When call function devm_platform_ioremap_resource(), we should use IS_ERR()
to check the return value and return PTR_ERR() if failed.
Signed-off-by: zhaoxiao <long870912@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
We want to enable the interrupts _before_ starting the transfer because
it is good programming style and also the proposed order in the R-Car
manual. There is no difference in practice because it doesn't matter in
which order both conditions appear if we wait for both to happen.
Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The original change works as intended, but Andy pointed in [0] that now
userspace could re-enable RPM via sysfs, even though we explicitly want
to disable it. So effectively revert the original patch, just with small
improvements:
- Calls to pm_runtime_allow()/pm_runtime_forbid() don't have to be
balanced, so we can remove the call to pm_runtime_forbid() in
i801_remove().
- priv->acpi_reserved is accessed after i801_acpi_remove(), and according
to Robert [1] the custom handler can't run any longer. Therefore we
don't have to take priv->acpi_lock.
[0] https://www.spinics.net/lists/linux-i2c/msg52730.html
[1] https://lore.kernel.org/linux-acpi/BYAPR11MB32561D19A0FD9AB93E2B1E5287D39@BYAPR11MB3256.namprd11.prod.outlook.com/T/#t
Fixes: 4e60d5dd10 ("i2c: i801: Improve disabling runtime pm")
Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
As pointed out by Andy in [0] using a local mutex here isn't strictly
wrong but not sufficient. We should hold the PCI rescan lock for P2SB
operations.
[0] https://www.spinics.net/lists/linux-i2c/msg52717.html
Fixes: 1a987c69ce ("i2c: i801: make p2sb_spinlock a mutex")
Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The return value of i801_add_mux() isn't used, so let's change it to void.
In addition remove the not needed cast to struct gpiod_lookup.
GPIO_LOOKUP() uses GPIO_LOOKUP_IDX() that includes this cast.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
By using ACPI_HANDLE() the handler argument can be retrieved directly.
Both address space handler functions check the handler argument and
return an error if it's NULL. This allows to further simplify the code.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
do_pci_enable_device() takes care that PCI_COMMAND_INTX_DISABLE
is cleared if a legacy interrupt is used.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Replace the ugly cast of the return_value pointer with proper usage.
In addition use dmi_match() instead of open-coding it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In case the XIIC does TX/RX transfer, make sure no other kernel thread
can start another TX transfer at the same time. This could happen since
the driver only checks tx_msg for being non-NULL and returns -EBUSY in
that case, however it is necessary to check also rx_msg for the same.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Transferring multiple messages via XIIC suffers from strange interaction
between the interrupt status/enable register flags. These flags are being
reused in the hardware to indicate different things for read and write
transfer, and doing multiple transactions becomes horribly complex. Just
send a single transaction and reload the controller with another message
once the transaction is done in the interrupt handler thread.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
There will never be threads queueing up in the xiic_xmit(), use
completion synchronization primitive to wait for the interrupt
handler thread to complete instead as it is much better fit and
there is no need to overload it for this purpose.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The __xiic_start_xfer() manipulates the interrupt flags, xiic_wakeup()
may result in return from xiic_xfer() early. Defer both to the end of
the xiic_process() interrupt thread, so that they are executed after
all the other interrupt bits handling completed and once it completely
safe to perform changes to the interrupt bits in the hardware.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The interrupt handler is missing locking when reading out registers
and is racing with other threads which might access the driver. Drop
it altogether, so that the threaded interrupt is always executed, as
that one is already serialized by the driver mutex. This also allows
dropping local_irq_save()/local_irq_restore() in xiic_start_recv().
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The tx_msg is set from multiple places, sometimes without locking,
which fall apart on any SMP system. Only ever access tx_msg inside
the driver mutex.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Highlights:
- Move all the Intel drivers into their own subdir(s) (mostly Kate's work)
- New meraki-mx100 platform driver
- Asus WMI driver enhancements, including
/sys/firmware/acpi/platform_profile support
- New BIOS SAR driver for Intel M.2 WWAM modems
- Alder Lake support for the Intel PMC driver
- A whole bunch of cleanups + fixes all over the place
The following is an automated git shortlog grouped by driver:
BIOS SAR driver for Intel M.2 Modem:
- BIOS SAR driver for Intel M.2 Modem
ISST:
- use semi-colons instead of commas
- Fix optimization with use of numa
Replace deprecated CPU-hotplug functions.:
- Replace deprecated CPU-hotplug functions.
Update Mario Limonciello's email address in the docs:
- Update Mario Limonciello's email address in the docs
acer-wmi:
- Add Turbo Mode support for Acer PH315-53
add meraki-mx100 platform driver:
- add meraki-mx100 platform driver
asus-nb-wmi:
- Add tablet_mode_sw=lid-flip quirk for the TP200s
- Allow configuring SW_TABLET_MODE method with a module option
asus-wmi:
- Fix "unsigned 'retval' is never less than zero" smatch warning
- Delete impossible condition
- Add support for platform_profile
- Add egpu enable method
- Add dgpu disable method
- Add panel overdrive functionality
dell-smbios:
- Remove unused dmi_system_id table
dell-smbios-wmi:
- Add missing kfree in error-exit from run_smbios_call
- Avoid false-positive memcpy() warning
dell-smo8800:
- Convert to be a platform driver
dual_accel_detect:
- Use the new i2c_acpi_client_count() helper
gigabyte-wmi:
- add support for B450M S2H V2
- add support for X570 GAMING X
hp_accel:
- Convert to be a platform driver
- Remove _INI method call
i2c:
- acpi: Add an i2c_acpi_client_count() helper function
i2c-multi-instantiate:
- Use the new i2c_acpi_client_count() helper
ideapad-laptop:
- Fix Legion 5 Fn lock LED
intel-hid:
- Move to intel sub-directory
intel-rst:
- Move to intel sub-directory
intel-smartconnect:
- Move to intel sub-directory
intel-uncore-frequency:
- Move to intel sub-directory
intel-vbtn:
- Move to intel sub-directory
intel-wmi-sbl-fw-update:
- Move to intel sub-directory
intel-wmi-thunderbolt:
- Move to intel sub-directory
intel_atomisp2:
- Move to intel sub-directory
intel_bxtwc_tmu:
- Move to intel sub-directory
intel_cht_int33fe:
- Use the new i2c_acpi_client_count() helper
intel_chtdc_ti_pwrbtn:
- Move to intel sub-directory
intel_int0002_vgpio:
- Move to intel sub-directory
intel_mrfld_pwrbtn:
- Move to intel sub-directory
intel_oaktrail:
- Move to intel sub-directory
intel_pmc_core:
- Move to intel sub-directory
- Prevent possibile overflow
intel_pmt_telemetry:
- Ignore zero sized entries
intel_punit_ipc:
- Move to intel sub-directory
intel_scu_ipc:
- Fix doc of intel_scu_ipc_dev_command_with_size()
intel_speed_select_if:
- Move to intel sub-directory
intel_telemetry:
- Move to intel sub-directory
intel_turbo_max_3:
- Move to intel sub-directory
lg-laptop:
- Use correct event for keyboard backlight FN-key
- Use correct event for touchpad toggle FN-key
- Support for battery charge limit on newer models
platform/mellanox:
- mlxbf-pmc: fix kernel-doc notation
platform/surface:
- aggregator: Use y instead of objs in Makefile
- surface3_power: Use i2c_acpi_get_i2c_resource() helper
platform/x86/intel:
- pmc/core: Add GBE Package C10 fix for Alder Lake PCH
- pmc/core: Add Alder Lake low power mode support for pmc core
- pmc/core: Add Latency Tolerance Reporting (LTR) support to Alder Lake
- pmc/core: Add Alderlake support to pmc core driver
- int3472: Use y instead of objs in Makefile
- pmt: Use y instead of objs in Makefile
- int33fe: Use y instead of objs in Makefile
- Move Intel PMT drivers to new subfolder
thermal/drivers/intel:
- Move intel_menlow to thermal drivers
think-lmi:
- add debug_cmd
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmEw1KAUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wk7Qf/dsaaDgx7aC6DfKzdcMgfeLIdTaGm
a6svNXM2t/JFdvhjYzxA+4QlQgco7zkN06iRlWbObEonSUsHlGlwEOHX60VgcopO
qJaqnznmfdXUocFTnA+5acJXabNaw7xkKHS0K61UWgk+mm6aMuygpKxULnNTa4X+
p3HoU6uXFckpoA/Jstzo5UfegNYhg11bflNd7XN4F3rMCbbNHAsWlf4oVr2YsEHa
wECW+1e8wZl4BInUzoXQhilRoybJWXWJ8sLsvQfDXLs9aNoLdDqu9p0MuXEW5QqE
wNt26SNNAP2L49BD6kaJszV5Ry/jNSEtVkWwkrzHbGTZoOEyMYas8pm6Uw==
=iK1W
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
- Move all the Intel drivers into their own subdir(s) (mostly Kate's
work)
- New meraki-mx100 platform driver
- Asus WMI driver enhancements, including support for
/sys/firmware/acpi/platform_profile
- New BIOS SAR driver for Intel M.2 WWAM modems
- Alder Lake support for the Intel PMC driver
- A whole bunch of cleanups + fixes all over the place"
* tag 'platform-drivers-x86-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits)
platform/x86: dell-smbios-wmi: Add missing kfree in error-exit from run_smbios_call
platform/x86: dell-smbios-wmi: Avoid false-positive memcpy() warning
platform/x86: ISST: use semi-colons instead of commas
platform/x86: asus-wmi: Fix "unsigned 'retval' is never less than zero" smatch warning
platform/x86: asus-wmi: Delete impossible condition
platform/x86: hp_accel: Convert to be a platform driver
platform/x86: hp_accel: Remove _INI method call
platform/mellanox: mlxbf-pmc: fix kernel-doc notation
platform/x86/intel: pmc/core: Add GBE Package C10 fix for Alder Lake PCH
platform/x86/intel: pmc/core: Add Alder Lake low power mode support for pmc core
platform/x86/intel: pmc/core: Add Latency Tolerance Reporting (LTR) support to Alder Lake
platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver
platform/x86: intel-wmi-thunderbolt: Move to intel sub-directory
platform/x86: intel-wmi-sbl-fw-update: Move to intel sub-directory
platform/x86: intel-vbtn: Move to intel sub-directory
platform/x86: intel_oaktrail: Move to intel sub-directory
platform/x86: intel_int0002_vgpio: Move to intel sub-directory
platform/x86: intel-hid: Move to intel sub-directory
platform/x86: intel_atomisp2: Move to intel sub-directory
platform/x86: intel_speed_select_if: Move to intel sub-directory
...
Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did the
following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
The latter one will cause a tiny merge issue with your tree, as there
was a last-minute fix for this in 5.14 in your tree, but the fixup
should be "obvious". If you want me to provide a fixed merge for this,
please let me know.
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs
users at once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS+FLQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylXuACfWECnysDtXNe66DdETCFs1a1RToYAoMokWeU5
s8VFP1NY2BjmxJbkebLL
=8kVu
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did
the following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs users at
once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue"
* tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits)
MAINTAINERS: Add dri-devel for component.[hc]
driver core: platform: Remove platform_device_add_properties()
ARM: tegra: paz00: Handle device properties with software node API
bitmap: extend comment to bitmap_print_bitmask/list_to_buf
drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI
topology: use bin_attribute to break the size limitation of cpumap ABI
lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases
cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list
sysfs: Rename struct bin_attribute member to f_mapping
sysfs: Invoke iomem_get_mapping() from the sysfs open callback
debugfs: Return error during {full/open}_proxy_open() on rmmod
zorro: Drop useless (and hardly used) .driver member in struct zorro_dev
zorro: Simplify remove callback
sh: superhyway: Simplify check in remove callback
nubus: Simplify check in remove callback
nubus: Make struct nubus_driver::remove return void
kernfs: dont call d_splice_alias() under kernfs node lock
kernfs: use i_lock to protect concurrent inode updates
kernfs: switch kernfs to use an rwsem
kernfs: use VFS negative dentry caching
...
Pull i2c updates from Wolfram Sang:
"I2C has a smaller pull reuest this time:
- new driver for I2C virtio
- removal of PMC SMP driver because platform is already gone
- IRQ probing and DMAENGINE API cleanups
- add SI metric prefix definitions to units.h
- beginning of i801 refactorization
- a few driver improvements"
* 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (28 commits)
i2c: cadence: Implement save restore
i2c: xlp9xx: fix main IRQ check
i2c: mt65xx: fix IRQ check
i2c: virtio: add a virtio i2c frontend driver
i2c: hix5hd2: fix IRQ check
i2c: s3c2410: fix IRQ check
i2c: iop3xx: fix deferred probing
i2c: synquacer: fix deferred probing
i2c: sun6i-pw2i: Prefer strscpy over strlcpy
i2c: remove dead PMC MSP TWI/SMBus/I2C driver
i2c: dev: Use sysfs_emit() in "show" functions
i2c: dev: Define pr_fmt() and drop duplication substrings
i2c: designware: Fix indentation in the header
i2c: designware: Use DIV_ROUND_CLOSEST() macro
units: Add SI metric prefix definitions
i2c: at91: mark PM ops as __maybe unused
i2c: sh_mobile: : use proper DMAENGINE API for termination
i2c: qup: : use proper DMAENGINE API for termination
i2c: mxs: : use proper DMAENGINE API for termination
i2c: imx: : use proper DMAENGINE API for termination
...
The zynqmp platform now supports chip-off so the registers can
lose context.
Implement save restore for i2c module.
Since we have only a couple of registers
an unconditional restore is done.
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Iff platform_get_irq() returns 0 for the main IRQ, the driver's probe()
method will return 0 early (as if the method's call was successful).
Let's consider IRQ0 valid for simplicity -- devm_request_irq() can always
override that decision...
Fixes: 2bbd681ba2 ("i2c: xlp9xx: Driver for Netlogic XLP9XX/5XX I2C controller")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: George Cherian <george.cherian@marvell.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Iff platform_get_irq() returns 0, the driver's probe() method will return 0
early (as if the method's call was successful). Let's consider IRQ0 valid
for simplicity -- devm_request_irq() can always override that decision...
Fixes: ce38815d39 ("I2C: mediatek: Add driver for MediaTek I2C controller")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add an I2C bus driver for virtio para-virtualization.
The controller can be emulated by the backend driver in
any device model software by following the virtio protocol.
The device specification can be found on
https://lists.oasis-open.org/archives/virtio-comment/202101/msg00008.html.
By following the specification, people may implement different
backend drivers to emulate different controllers according to
their needs.
Co-developed-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Iff platform_get_irq() returns 0, the driver's probe() method will return 0
early (as if the method's call was successful). Let's consider IRQ0 valid
for simplicity -- devm_request_irq() can always override that decision...
Fixes: 15ef27756b ("i2c: hix5hd2: add i2c controller driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Iff platform_get_irq() returns 0, the driver's probe() method will return 0
early (as if the method's call was successful). Let's consider IRQ0 valid
for simplicity -- devm_request_irq() can always override that decision...
Fixes: e0d1ec9785 ("i2c-s3c2410: Change IRQ to be plain integer.")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When adding the code to handle platform_get_irq*() errors in the commit
489447380a ("handle errors returned by platform_get_irq*()"), the
actual error code was enforced to be -ENXIO in the driver for some
strange reason. This didn't matter much until the deferred probing was
introduced -- which requires an actual error code to be propagated
upstream from the failure site.
While fixing this, also stop overriding the errors from request_irq() to
-EIO (done since the pre-git era).
Fixes: 489447380a ("[PATCH] handle errors returned by platform_get_irq*()")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The driver overrides the error codes returned by platform_get_irq() to
-ENODEV, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the
error codes upstream.
Fixes: 0d676a6c43 ("i2c: add support for Socionext SynQuacer I2C controller")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
strlcpy() reads the entire source buffer first. This read may exceed the
destination size limit. This is both inefficient and can lead to linear
read overflows if a source string is not NUL-terminated. The safe
replacement is strscpy().
This is a previous step in the path to remove the strlcpy() function
entirely from the kernel [1].
[1] https://github.com/KSPP/linux/issues/89
Signed-off-by: Len Baker <len.baker@gmx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Commit 1b00767fd8 ("MIPS: Remove PMC MSP71xx platform") removes the
config PMC_MSP in ./arch/mips/Kconfig.
Hence, since then, the corresponding PMC MSP TWI/SMBus/I2C driver is
dead code. Remove this dead driver.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
We have 3 files now which have the need to count the number of
I2cSerialBus resources in an ACPI-device's resource-list.
Currently all implement their own helper function for this,
add a generic helper function to replace the 3 implementations.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210803160044.158802-2-hdegoede@redhat.com
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
The sysfs_emit() function was introduced to make it less ambiguous
which function is preferred when writing to the output buffer in
a "show" callback [1].
Convert the I²C device sysfs interface from sprintf() to sysfs_emit()
accordingly, as the latter is aware of the PAGE_SIZE buffer and correctly
returns the number of bytes written into the buffer.
No functional change intended.
[1] Documentation/filesystems/sysfs.rst
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Define pr_fmt() to print module name as prefix and at the same time
drop duplication substrings in the messages.
While at it, convert printk(<LEVEL>) to pr_<level>().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In couple of places the indentation makes harder to read the code.
Fix it to be sane.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Instead of open-coding DIV_ROUND_CLOSEST() and similar use the macros directly.
While at it, replace numbers with predefined SI metric prefixes.
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The driver uses pm_ptr(), so the PM ops could be unused.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: dab4b0e8c9 ("i2c: at91: remove #define CONFIG_PM")
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
dmaengine_terminate_all() is deprecated in favor of explicitly saying if
it should be sync or async. Here, we want dmaengine_terminate_sync()
because there is no other synchronization code in the driver to handle
an async case.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
dmaengine_terminate_all() is deprecated in favor of explicitly saying if
it should be sync or async. Here, we want dmaengine_terminate_sync()
because there is no other synchronization code in the driver to handle
an async case.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
dmaengine_terminate_all() is deprecated in favor of explicitly saying if
it should be sync or async. Here, we want dmaengine_terminate_sync()
because there is no other synchronization code in the driver to handle
an async case.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
dmaengine_terminate_all() is deprecated in favor of explicitly saying if
it should be sync or async. Here, we want dmaengine_terminate_sync()
because there is no other synchronization code in the driver to handle
an async case.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
dmaengine_terminate_all() is deprecated in favor of explicitly saying if
it should be sync or async. Here, we want dmaengine_terminate_sync()
because there is no other synchronization code in the driver to handle
an async case.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Remove #define CONFIG_PM and use __maybe_unused for PM functions and
pm_ptr() for PM ops.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Switch to use module_parport_driver() to reduce boilerplate code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
If an i2c driver happens to not provide the full amount of data that a
user asks for, it is possible that some uninitialized data could be sent
to userspace. While all in-kernel drivers look to be safe, just be sure
by initializing the buffer to zero before it is passed to the i2c driver
so that any future drivers will not have this issue.
Also properly copy the amount of data recvieved to the userspace buffer,
as pointed out by Dan Carpenter.
Reported-by: Eric Dumazet <edumazet@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
If a user is interested in such details he can enable smbus tracing.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
p2sb_spinlock is used in i801_add_tco_spt() only, and in process context
only. Therefore a mutex is sufficient, and we can make the definition
local to i801_add_tco_spt().
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Setting the autosuspend delay to a negative value disables runtime pm in
a little bit smarter way, because we need no cleanup when removing the
driver. Note that this is safe when reloading the driver, because the
call to pm_runtime_set_autosuspend_delay() in probe() will reverse the
effect. See update_autosuspend() for details.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The driver is written as if platform_get_irq() returns 0 on errors (while
actually it returns a negative error code), blithely passing these error
codes to request_irq() (which takes *unsigned* IRQ #) -- which fails with
-EINVAL. Add the necessary error check to the pre-existing *if* statement
forcing the driver into the polling mode...
Fixes: 4ad48e6ab1 ("i2c: Renesas Highlander FPGA SMBus support")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Bit SMBHSTCNT_PEC_EN is used only if software calculates the CRC and
uses register SMBPEC. This is not supported by the driver, it supports
hw-calculation of CRC only (using bit SMBAUXSTS_CRCE). The chip spec
states the following, therefore never set bit SMBHSTCNT_PEC_EN.
Chapter SMBus CRC Generation and Checking
If the AAC bit is set in the Auxiliary Control register, the PCH
automatically calculates and drives CRC at the end of the transmitted
packet for write cycles, and will check the CRC for read cycles. It will
not transmit the contents of the PEC register for CRC. The PEC bit must
not be set in the Host Control register. If this bit is set, unspecified
behavior will result.
This patch is based solely on the specification and compile-tested only,
because I have no PEC-capable devices.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.
This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.
With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.
Reviewed-by: Tom Rix <trix@redhat.com> (For fpga)
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts)
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb)
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media)
Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform)
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com> (For xen)
Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd)
Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb)
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus)
Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio)
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack)
Acked-by: Geoff Levand <geoff@infradead.org> (For ps3)
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt)
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th)
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia)
Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI)
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr)
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid)
Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa)
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire)
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid)
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox)
Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC)
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During some transfers the bus can still be busy when an interrupt is
received. Commit 763778cd79 ("i2c: mpc: Restore reread of I2C status
register") attempted to address this by re-reading MPC_I2C_SR once but
that just made it less likely to happen without actually preventing it.
Instead of a single re-read, poll with a timeout so that the bus is given
enough time to settle but a genuine stuck SCL is still noticed.
Fixes: 1538d82f46 ("i2c: mpc: Interrupt driven transfer")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Pull i2c updates from Wolfram Sang:
- core supports now bus regulators controlling power for SCL/SDA
- quite some DT binding conversions to YAML
- added a seperate DT binding for the optional SMBus Alert feature
- documentation with examples how to deal with I2C sysfs files
- some bigger rework for the i801 driver
- and a few usual driver updates
* 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (42 commits)
i2c: ali1535: mention that the device should not be disabled
i2c: mpc: Restore reread of I2C status register
i2c: core-smbus: Expose PEC calculate function for generic use
Documentation: i2c: Add doc for I2C sysfs
i2c: core: Disable client irq on reboot/shutdown
dt-bindings: i2c: update bindings for MT8195 SoC
i2c: imx: Fix some checkpatch warnings
i2c: davinci: Simplify with dev_err_probe()
i2c: cadence: Simplify with dev_err_probe()
i2c: xiic: Simplify with dev_err_probe()
i2c: cadence: Clear HOLD bit before xfer_size register rolls over
dt-bindings: i2c: ce4100: Replace "ti,pcf8575" by "nxp,pcf8575"
i2c: i801: Improve i801_setup_hstcfg
i2c: i801: Use driver name constant instead of function dev_driver_string
i2c: i801: Simplify initialization of i2c_board_info in i801_probe_optional_slaves
i2c: i801: Improve status polling
i2c: cht-wc: Replace of_node by NULL
i2c: riic: Add RZ/G2L support
dt-bindings: i2c: renesas,riic: Document RZ/G2L I2C controller
dt-bindings: i2c: renesas,iic: Convert to json-schema
...
The comment from the i801 driver is valid here, too, so copy it.
Reported-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Prior to commit 1538d82f46 ("i2c: mpc: Interrupt driven transfer") the
old interrupt handler would reread MPC_I2C_SR after checking the CSR_MIF
bit. When the driver was re-written this was removed as it seemed
unnecessary. However as it turns out this is necessary for i2c devices
which do clock stretching otherwise we end up thinking the bus is still
busy when processing the interrupt.
Fixes: 1538d82f46 ("i2c: mpc: Interrupt driven transfer")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
- Update ACPICA code in the kernel to upstrea revision 20210604
including the following changes:
* Add defines for the CXL Host Bridge Structureand and add the
CFMWS structure definition to CEDT (Alison Schofield).
* iASL: Finish support for the IVRS ACPI table (Bob Moore).
* iASL: Add support for the SVKL table (Bob Moore).
* iASL: Add full support for RGRT ACPI table (Bob Moore).
* iASL: Add support for the BDAT ACPI table (Bob Moore).
* iASL: add disassembler support for PRMT (Erik Kaneda).
* Fix memory leak caused by _CID repair function (Erik Kaneda).
* Add support for PlatformRtMechanism OpRegion (Erik Kaneda).
* Add PRMT module header to facilitate parsing (Erik Kaneda).
* Add _PLD panel positions (Fabian Wüthrich).
* MADT: add Multiprocessor Wakeup Mailbox Structure and the
SVKL table headers (Kuppuswamy Sathyanarayanan).
* Use ACPI_FALLTHROUGH (Wei Ming Chen).
- Add preliminary support for the Platform Runtime Mechanism (PRM)
to allow the AML interpreter to call PRM functions (Erik Kaneda).
- Address some issues related to the handling of device dependencies
reported by _DEP in the ACPI device enumeration code and clean up
some related pieces of it (Rafael Wysocki).
- Improve the tracking of states of ACPI power resources (Rafael
Wysocki).
- Improve ACPI support for suspend-to-idle on AMD systems (Alex
Deucher, Mario Limonciello, Pratik Vishwakarma).
- Continue the unification and cleanup of message printing in the
ACPI code (Hanjun Guo, Heiner Kallweit).
- Fix possible buffer overrun issue with the description_show()
sysfs attribute method (Krzysztof Wilczyński).
- Improve the acpi_mask_gpe kernel command line parameter handling
and clean up the core ACPI code related to sysfs (Andy Shevchenko,
Baokun Li, Clayton Casciato).
- Postpone bringing devices in the general ACPI PM domain to D0
during resume from system-wide suspend until they are really
needed (Dmitry Torokhov).
- Make the ACPI processor driver fix up C-state latency if not
ordered (Mario Limonciello).
- Add support for identifying devices depening on the given one
that are not its direct descendants with the help of _DEP (Daniel
Scally).
- Extend the checks related to ACPI IRQ overrides on x86 in order to
avoid false-positives (Hui Wang).
- Add battery DPTF participant for Intel SoCs (Sumeet Pawnikar).
- Rearrange the ACPI fan driver and device power management code to
use a common list of device IDs (Rafael Wysocki).
- Fix clang CFI violation in the ACPI BGRT table parsing code and
clean it up (Nathan Chancellor).
- Add GPE-related quirks for some laptops to the EC driver (Chris
Chiu, Zhang Rui).
- Make the ACPI PPTT table parsing code populate the cache-id
value if present in the firmware (James Morse).
- Remove redundant clearing of context->ret.pointer from
acpi_run_osc() (Hans de Goede).
- Add missing acpi_put_table() in acpi_init_fpdt() (Jing Xiangfeng).
- Make ACPI APEI handle ARM Processor Error CPER records like
Memory Error ones to avoid user space task lockups (Xiaofei Tan).
- Stop warning about disabled ACPI in APEI (Jon Hunter).
- Fix fall-through warning for Clang in the SBSHC driver (Gustavo A.
R. Silva).
- Add custom DSDT file as Makefile prerequisite (Richard Fitzgerald).
- Initialize local variable to avoid garbage being returned (Colin
Ian King).
- Simplify assorted pieces of code, address assorted coding style
and documentation issues and comment typos (Baokun Li, Christophe
JAILLET, Clayton Casciato, Liu Shixin, Shaokun Zhang, Wei Yongjun,
Yang Li, Zhen Lei).
-----BEGIN PGP SIGNATURE-----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=S//q
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to the 20210604 upstream
revision, add preliminary support for the Platform Runtime Mechanism
(PRM), address issues related to the handling of device dependencies
in the ACPI device eunmeration code, improve the tracking of ACPI
power resource states, improve the ACPI support for suspend-to-idle on
AMD systems, continue the unification of message printing in the ACPI
code, address assorted issues and clean up the code in a number of
places.
Specifics:
- Update ACPICA code in the kernel to upstrea revision 20210604
including the following changes:
- Add defines for the CXL Host Bridge Structureand and add the
CFMWS structure definition to CEDT (Alison Schofield).
- iASL: Finish support for the IVRS ACPI table (Bob Moore).
- iASL: Add support for the SVKL table (Bob Moore).
- iASL: Add full support for RGRT ACPI table (Bob Moore).
- iASL: Add support for the BDAT ACPI table (Bob Moore).
- iASL: add disassembler support for PRMT (Erik Kaneda).
- Fix memory leak caused by _CID repair function (Erik Kaneda).
- Add support for PlatformRtMechanism OpRegion (Erik Kaneda).
- Add PRMT module header to facilitate parsing (Erik Kaneda).
- Add _PLD panel positions (Fabian Wüthrich).
- MADT: add Multiprocessor Wakeup Mailbox Structure and the SVKL
table headers (Kuppuswamy Sathyanarayanan).
- Use ACPI_FALLTHROUGH (Wei Ming Chen).
- Add preliminary support for the Platform Runtime Mechanism (PRM) to
allow the AML interpreter to call PRM functions (Erik Kaneda).
- Address some issues related to the handling of device dependencies
reported by _DEP in the ACPI device enumeration code and clean up
some related pieces of it (Rafael Wysocki).
- Improve the tracking of states of ACPI power resources (Rafael
Wysocki).
- Improve ACPI support for suspend-to-idle on AMD systems (Alex
Deucher, Mario Limonciello, Pratik Vishwakarma).
- Continue the unification and cleanup of message printing in the
ACPI code (Hanjun Guo, Heiner Kallweit).
- Fix possible buffer overrun issue with the description_show() sysfs
attribute method (Krzysztof Wilczyński).
- Improve the acpi_mask_gpe kernel command line parameter handling
and clean up the core ACPI code related to sysfs (Andy Shevchenko,
Baokun Li, Clayton Casciato).
- Postpone bringing devices in the general ACPI PM domain to D0
during resume from system-wide suspend until they are really needed
(Dmitry Torokhov).
- Make the ACPI processor driver fix up C-state latency if not
ordered (Mario Limonciello).
- Add support for identifying devices depening on the given one that
are not its direct descendants with the help of _DEP (Daniel
Scally).
- Extend the checks related to ACPI IRQ overrides on x86 in order to
avoid false-positives (Hui Wang).
- Add battery DPTF participant for Intel SoCs (Sumeet Pawnikar).
- Rearrange the ACPI fan driver and device power management code to
use a common list of device IDs (Rafael Wysocki).
- Fix clang CFI violation in the ACPI BGRT table parsing code and
clean it up (Nathan Chancellor).
- Add GPE-related quirks for some laptops to the EC driver (Chris
Chiu, Zhang Rui).
- Make the ACPI PPTT table parsing code populate the cache-id value
if present in the firmware (James Morse).
- Remove redundant clearing of context->ret.pointer from
acpi_run_osc() (Hans de Goede).
- Add missing acpi_put_table() in acpi_init_fpdt() (Jing Xiangfeng).
- Make ACPI APEI handle ARM Processor Error CPER records like Memory
Error ones to avoid user space task lockups (Xiaofei Tan).
- Stop warning about disabled ACPI in APEI (Jon Hunter).
- Fix fall-through warning for Clang in the SBSHC driver (Gustavo A.
R. Silva).
- Add custom DSDT file as Makefile prerequisite (Richard Fitzgerald).
- Initialize local variable to avoid garbage being returned (Colin
Ian King).
- Simplify assorted pieces of code, address assorted coding style and
documentation issues and comment typos (Baokun Li, Christophe
JAILLET, Clayton Casciato, Liu Shixin, Shaokun Zhang, Wei Yongjun,
Yang Li, Zhen Lei)"
* tag 'acpi-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (97 commits)
ACPI: PM: postpone bringing devices to D0 unless we need them
ACPI: tables: Add custom DSDT file as makefile prerequisite
ACPI: bgrt: Use sysfs_emit
ACPI: bgrt: Fix CFI violation
ACPI: EC: trust DSDT GPE for certain HP laptop
ACPI: scan: Simplify acpi_table_events_fn()
ACPI: PM: Adjust behavior for field problems on AMD systems
ACPI: PM: s2idle: Add support for new Microsoft UUID
ACPI: PM: s2idle: Add support for multiple func mask
ACPI: PM: s2idle: Refactor common code
ACPI: PM: s2idle: Use correct revision id
ACPI: sysfs: Remove tailing return statement in void function
ACPI: sysfs: Use __ATTR_RO() and __ATTR_RW() macros
ACPI: sysfs: Sort headers alphabetically
ACPI: sysfs: Refactor param_get_trace_state() to drop dead code
ACPI: sysfs: Unify pattern of memory allocations
ACPI: sysfs: Allow bitmap list to be supplied to acpi_mask_gpe
ACPI: sysfs: Make sparse happy about address space in use
ACPI: scan: Fix race related to dropping dependencies
ACPI: scan: Reorganize acpi_device_add()
...
Expose the PEC calculation i2c_smbus_pec() for generic use.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Acked-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Control transfers without a data stage are treated as OUT requests by
the USB stack and should be using usb_sndctrlpipe(). Failing to do so
will now trigger a warning.
Fix the OSIFI2C_SET_BIT_RATE and OSIFI2C_STOP requests which erroneously
used the osif_usb_read() helper and set the IN direction bit.
Reported-by: syzbot+9d7dadd15b8819d73f41@syzkaller.appspotmail.com
Fixes: 83e53a8f12 ("i2c: Add bus driver for for OSIF USB i2c device.")
Cc: stable@vger.kernel.org # 3.14
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
If an i2c client receives an interrupt during reboot or shutdown it may
be too late to service it by making an i2c transaction on the bus
because the i2c controller has already been shutdown. This can lead to
system hangs if the i2c controller tries to make a transfer that is
doomed to fail because the access to the i2c pins is already shut down,
or an iommu translation has been torn down so i2c controller register
access doesn't work.
Let's simply disable the irq if there isn't a shutdown callback for an
i2c client when there is an irq associated with the device. This will
make sure that irqs don't come in later than the time that we can handle
it. We don't do this if the i2c client device already has a shutdown
callback because presumably they're doing the right thing and quieting
the device so irqs don't come in after the shutdown callback returns.
Reported-by: kernel test robot <lkp@intel.com>
[swboyd@chromium.org: Dropped newline, added commit text, added
interrupt.h for robot build error]
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fix the following warnings reported by checkpatch::
drivers/i2c/busses/i2c-imx.c:173: WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
drivers/i2c/busses/i2c-imx.c:175: WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
drivers/i2c/busses/i2c-imx.c:176: WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
drivers/i2c/busses/i2c-imx.c:177: WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
drivers/i2c/busses/i2c-imx.c:455: WARNING: Unnecessary ftrace-like logging - prefer using ftrace
drivers/i2c/busses/i2c-imx.c:602: WARNING: Unnecessary ftrace-like logging - prefer using ftrace
drivers/i2c/busses/i2c-imx.c:638: WARNING: Unnecessary ftrace-like logging - prefer using ftrace
drivers/i2c/busses/i2c-imx.c:1170: WARNING: Unnecessary ftrace-like logging - prefer using ftrace
drivers/i2c/busses/i2c-imx.c:1374: WARNING: Unnecessary ftrace-like logging - prefer using ftrace
drivers/i2c/busses/i2c-imx.c:1398: WARNING: Prefer strscpy over strlcpy - see: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Kwon Tae-young <tykwon@m2i.co.kr>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fix Sparse warnings:
drivers/i2c/i2c-dev.c:546:19: warning: incorrect type in assignment (different address spaces)
drivers/i2c/i2c-dev.c:549:53: warning: incorrect type in argument 2 (different address spaces)
compat_ptr() returns a pointer tagged __user which gets assigned to a
pointer missing the __user annotation. The same pointer is passed to
copy_from_user() as an argument where it is expected to have the __user
annotation. Fix both by adding the __user annotation to the pointer.
Fixes: 7d5cb45655 ("i2c compat ioctls: move to ->compat_ioctl()")
Signed-off-by: Andreas Hecht <andreas.e.hecht@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
On Xilinx zynq SOC if the delay between address register write and
control register write in cdns_mrecv function is more, the xfer size
register rolls over and controller is stuck. This is an IP bug and
is resolved in later versions of IP.
To avoid this scenario, disable the interrupts on the current processor
core between the two register writes and enable them later. This can
help achieve the timing constraint.
Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
We need to add a check for if the kzalloc() fails.
Fixes: 4a7695429e ("i2c: cp2615: add i2c driver for Silicon Labs' CP2615 Digital Audio Bridge")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Bence Csókás <bence98@sch.bme.hu>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
As explained in [0] currently we may leave SMBHSTSTS_INUSE_STS set,
thus potentially breaking ACPI/BIOS usage of the SMBUS device.
Seems patch [0] needs a little bit more of review effort, therefore
I'd suggest to apply a part of it as quick win. Just clearing
SMBHSTSTS_INUSE_STS when leaving i801_access() should fix the
referenced issue and leaves more time for discussing a more
sophisticated locking handling.
[0] https://www.spinics.net/lists/linux-i2c/msg51558.html
Fixes: 01590f361e ("i2c: i801: Instantiate SPD EEPROMs automatically")
Suggested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
i801_setup_hstcfg() leaves the bits in priv->original_hstcfg that
we're interested in intact. Therefore we can remove the return value
from the function and use priv->original_hstcfg directly.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
We are the driver, so we can use the driver name directly instead of
retrieving it by calling dev_driver_string().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Why shall we bother to open-code something that the compiler can do for us.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Polling uses the same timeout as irq mode: 400 * 500us = 200ms = HZ / 5.
So let's use the adapter->timeout value also for polling. This has the
advantage that userspace can control the timeout value for polling as
well. In addition change the code to make it better readable.
Last but not least remove the timeout debug messages. Calls to both
functions are followed by a call to i801_check_post() that will print
an error message in case of timeout.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The driver is run on the platforms where OF node is always NULL.
The confusion comes from IRQ domain APIs that take either OF or
firmware node as input parameter. Since fwnode is not used here
either, replace of_node by NULL.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
RZ/G2L i2c controller is compatible with RZ/A i2c controller.
By default IP is in reset state, so need to perform release
reset before accessing any register.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The acpi_walk_dep_device_list() function is not as generic as its
name implies, serving only to decrement the dependency count for each
dependent device of the input.
Extend it to accept a callback which can be applied to all the
dependencies in acpi_dep_list.
Replace all existing calls to the function with calls to a wrapper,
passing a callback that applies the same dependency reduction.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Maximilian Luz <luzmaximilian@gmail.com> # for platform/surface parts
Signed-off-by: Daniel Scally <djrscally@gmail.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Mark bus as suspended during system suspend to block the future
transfers. Implement geni_i2c_resume_noirq() to resume the bus.
Fixes: 37692de5d5 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller")
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
If the hardware is still accessing memory after SMMU translation
is disabled (as part of smmu shutdown callback), then the
IOVAs (I/O virtual address) which it was using will go on the bus
as the physical addresses which will result in unknown crashes
like NoC/interconnect errors.
So, implement shutdown callback for i2c driver to suspend the bus
during system "reboot" or "shutdown".
Fixes: 37692de5d5 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller")
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-tegra-bpmp.c:86: warning: Function parameter or member 'i2c' not described in 'tegra_bpmp_serialize_i2c_msg'
drivers/i2c/busses/i2c-tegra-bpmp.c:86: warning: Function parameter or member 'request' not described in 'tegra_bpmp_serialize_i2c_msg'
drivers/i2c/busses/i2c-tegra-bpmp.c:86: warning: Function parameter or member 'msgs' not described in 'tegra_bpmp_serialize_i2c_msg'
drivers/i2c/busses/i2c-tegra-bpmp.c:86: warning: Function parameter or member 'num' not described in 'tegra_bpmp_serialize_i2c_msg'
drivers/i2c/busses/i2c-tegra-bpmp.c:86: warning: expecting prototype for The serialized I2C format is simply the following(). Prototype was for tegra_bpmp_serialize_i2c_msg() instead
drivers/i2c/busses/i2c-tegra-bpmp.c:130: warning: Function parameter or member 'i2c' not described in 'tegra_bpmp_i2c_deserialize'
drivers/i2c/busses/i2c-tegra-bpmp.c:130: warning: Function parameter or member 'response' not described in 'tegra_bpmp_i2c_deserialize'
drivers/i2c/busses/i2c-tegra-bpmp.c:130: warning: Function parameter or member 'msgs' not described in 'tegra_bpmp_i2c_deserialize'
drivers/i2c/busses/i2c-tegra-bpmp.c:130: warning: Function parameter or member 'num' not described in 'tegra_bpmp_i2c_deserialize'
drivers/i2c/busses/i2c-tegra-bpmp.c:130: warning: expecting prototype for The data in the BPMP(). Prototype was for tegra_bpmp_i2c_deserialize() instead
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-altera.c:74: warning: cannot understand function prototype: 'struct altr_i2c_dev '
drivers/i2c/busses/i2c-altera.c:180: warning: Function parameter or member 'idev' not described in 'altr_i2c_transfer'
drivers/i2c/busses/i2c-altera.c:180: warning: Function parameter or member 'data' not described in 'altr_i2c_transfer'
drivers/i2c/busses/i2c-altera.c:193: warning: Function parameter or member 'idev' not described in 'altr_i2c_empty_rx_fifo'
drivers/i2c/busses/i2c-altera.c:209: warning: Function parameter or member 'idev' not described in 'altr_i2c_fill_tx_fifo'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add vbus-supply which provides power to SCL/SDA. Pass this regulator
into core so it can be turned on/off for low power mode support.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Although in the most platforms, the bus power of i2c
are alway on, some platforms disable the i2c bus power
in order to meet low power request.
We can control bulk regulator if it is provided in i2c
adapter device.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
One may notice that dev_printk(KERN_DEBUG ...) is *not* an equivalent
to dev_dbg(). It will be printed whenever loglevel is high enough.
And currently it will be the only message in the I²C core in some
configurations that got printed under above conditions.
Moving to dev_dbg() will hide it in the configurations where Dynamic Debug
is enabled and hence align with all other debug messages in the I²C core..
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Interrupt handler processes multiple message write requests one after
another, till the driver message queue is drained. However if driver
encounters a read message without preceding START, it stops the I2C
transfer as it is an invalid condition for the controller. At least the
comment describes a requirement "the controller forces us to send a new
START when we change direction". This stop results in clearing the
message queue (i2c->msg = NULL).
The code however immediately jumped back to label "retry_write" which
dereferenced the "i2c->msg" making it a possible NULL pointer
dereference.
The Coverity analysis:
1. Condition !is_msgend(i2c), taking false branch.
if (!is_msgend(i2c)) {
2. Condition !is_lastmsg(i2c), taking true branch.
} else if (!is_lastmsg(i2c)) {
3. Condition i2c->msg->flags & 1, taking true branch.
if (i2c->msg->flags & I2C_M_RD) {
4. write_zero_model: Passing i2c to s3c24xx_i2c_stop, which sets i2c->msg to NULL.
s3c24xx_i2c_stop(i2c, -EINVAL);
5. Jumping to label retry_write.
goto retry_write;
6. var_deref_model: Passing i2c to is_msgend, which dereferences null i2c->msg.
if (!is_msgend(i2c)) {"
All previous calls to s3c24xx_i2c_stop() in this interrupt service
routine are followed by jumping to end of function (acknowledging
the interrupt and returning). This seems a reasonable choice also here
since message buffer was entirely emptied.
Addresses-Coverity: Explicit null dereferenced
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The i2c controller driver do dma reset after transfer timeout,
but sometimes dma reset will trigger an unexpected DMA_ERR irq.
It will cause the i2c controller to continuously send interrupts
to the system and cause soft lock-up. So we need to disable i2c
start_en and clear intr_stat to stop i2c controller before dma
reset when transfer timeout.
Fixes: aafced673c06("i2c: mediatek: move dma reset before i2c reset")
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The compatible value "renesas,i2c-rcar" was deprecated in commit
ad4a8dc3fe ("i2c: rcar: Add per-Generation fallback bindings"),
and never had any users in upstream Linux. Drop its match entry from
the driver.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Rename i2c irq name with dev_name() which can provide unique
naming in /proc/interrupts for each instance of the I2C IP core.
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Layout of these registers is part of the PCI standard. Therefore use
the constants defined by the PCI subsystem.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Using the completion API is more intuitive and it allows to simplify
the code. Note that we don't have to set priv->status = 0 any longer
with the completion API.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When passing -ETIMEDOUT to i801_check_post() it will emit a timeout
error message. I don't see much benefit in an additional warning
stating more or less the same.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The P2040/P2041 has an erratum where the normal i2c recovery mechanism
does not work. Implement the alternative recovery mechanism documented
in the P2040 Chip Errata Rev Q.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The ast25xx and ast26xx have, respectively, two and three configurable
slave device addresses to the ast24xx's one. We only support using
one at a time, but the others may come up in an indeterminate state
depending on hardware/bootloader behavior, so we need to make sure we
disable them so as to avoid ending up with phantom devices on the bus.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-stm32f4.c:321: warning: expecting prototype for stm32f4_i2c_write_ byte()(). Prototype was for stm32f4_i2c_write_byte() instead
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-st.c:531: warning: expecting prototype for st_i2c_handle_write(). Prototype was for st_i2c_handle_read() instead
drivers/i2c/busses/i2c-st.c:566: warning: expecting prototype for st_i2c_isr(). Prototype was for st_i2c_isr_thread() instead
Fix the "enmpty" typo while here.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-pnx.c:147: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_start'
drivers/i2c/busses/i2c-pnx.c:147: warning: Excess function parameter 'adap' description in 'i2c_pnx_start'
drivers/i2c/busses/i2c-pnx.c:202: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_stop'
drivers/i2c/busses/i2c-pnx.c:202: warning: Excess function parameter 'adap' description in 'i2c_pnx_stop'
drivers/i2c/busses/i2c-pnx.c:231: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_master_xmit'
drivers/i2c/busses/i2c-pnx.c:231: warning: Excess function parameter 'adap' description in 'i2c_pnx_master_xmit'
drivers/i2c/busses/i2c-pnx.c:301: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_master_rcv'
drivers/i2c/busses/i2c-pnx.c:301: warning: Excess function parameter 'adap' description in 'i2c_pnx_master_rcv'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-ocores.c:253: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/i2c/busses/i2c-ocores.c:267: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/i2c/busses/i2c-ocores.c:299: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/i2c/busses/i2c-ocores.c:347: warning: expecting prototype for It handles an IRQ(). Prototype was for ocores_process_polling() instead
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-eg20t.c:151: warning: bad line: PCH i2c controller
drivers/i2c/busses/i2c-eg20t.c:369: warning: Function parameter or member 'msgs' not described in 'pch_i2c_writebytes'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-designware-master.c:176: warning: expecting prototype for i2c_dw_init(). Prototype was for i2c_dw_init_master() instead
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-cadence.c:157: warning: expecting prototype for enum cdns_i2c_slave_mode. Prototype was for enum cdns_i2c_slave_state instead
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-ali1563.c:24: warning: expecting prototype for i2c(). Prototype was for ALI1563_MAX_TIMEOUT() instead
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/i2c/muxes/i2c-arb-gpio-challenge.c:43: warning: Function parameter or member 'muxc' not described in 'i2c_arbitrator_select'
drivers/i2c/muxes/i2c-arb-gpio-challenge.c:43: warning: Function parameter or member 'chan' not described in 'i2c_arbitrator_select'
drivers/i2c/muxes/i2c-arb-gpio-challenge.c:86: warning: Function parameter or member 'muxc' not described in 'i2c_arbitrator_deselect'
drivers/i2c/muxes/i2c-arb-gpio-challenge.c:86: warning: Function parameter or member 'chan' not described in 'i2c_arbitrator_deselect'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-nomadik.c:184: warning: Function parameter or member 'timeout' not described in 'nmk_i2c_dev'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When switching the Gen3 SoCs to the new clock calculation formulas, the
match entry for RZ/G2E added in commit 51243b7345 ("i2c:
sh_mobile: Add support for r8a774c0 (RZ/G2E)") was forgotten.
Fixes: e8a2756750 ("i2c: sh_mobile: use new clock calculation formulas for Gen3")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add support for the SMBus-Alert protocol to the STM32F7 that has
dedicated control and status logic.
If SMBus-Alert is used, the SMBALERT# pin must be configured as alternate
function for I2C Alert.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The HiSilicon Kunpeng I2C controller driver relies on ACPI to probe for
its presence. Hence add a dependency on ACPI, to prevent asking the
user about this driver when configuring a kernel without ACPI firmware
support.
Fixes: d62fbdb99a ("i2c: add support for HiSilicon I2C controller")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The last user of new_fwnode was removed, leading to:
drivers/i2c/busses/i2c-icy.c: In function ‘icy_probe’:
drivers/i2c/busses/i2c-icy.c:126:24: warning: unused variable ‘new_fwnode’ [-Wunused-variable]
126 | struct fwnode_handle *new_fwnode;
| ^~~~~~~~~~
Fixes: dd7a37102b ("i2c: icy: Constify the software node")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Max Staudt <max@enpas.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
There is a spelling mistake in an error message string, fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Akash Asthana <akashast@codeaurora.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
SM8250 CCI is the same as SDM845, add an equivalent compatible for SM8250.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Pull i2c updates from Wolfram Sang:
- new drivers for Silicon Labs CP2615 and the HiSilicon I2C unit
- bigger refactoring for the MPC driver
- support for full software nodes - no need to work around with only
properties anymore
- we now have 'devm_i2c_add_adapter', too
- sub-system wide fixes for the RPM refcounting problem which often
caused a leak when an error was encountered during probe
- the rest is usual driver updates and improvements
* 'i2c/for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (77 commits)
i2c: mediatek: Use scl_int_delay_ns to compensate clock-stretching
i2c: mediatek: Fix wrong dma sync flag
i2c: mediatek: Fix send master code at more than 1MHz
i2c: sh7760: fix IRQ error path
i2c: i801: Add support for Intel Alder Lake PCH-M
i2c: core: Fix spacing error by checkpatch
i2c: s3c2410: simplify getting of_device_id match data
i2c: nomadik: Fix space errors
i2c: iop3xx: Fix coding style issues
i2c: amd8111: Fix coding style issues
i2c: mpc: Drop duplicate message from devm_platform_ioremap_resource()
i2c: mpc: Use device_get_match_data() helper
i2c: mpc: Remove CONFIG_PM_SLEEP ifdeffery
i2c: mpc: Use devm_clk_get_optional()
i2c: mpc: Update license and copyright
i2c: mpc: Interrupt driven transfer
i2c: sh7760: add IRQ check
i2c: rcar: add IRQ check
i2c: mlxbf: add IRQ check
i2c: jz4780: add IRQ check
...
- Enable KFENCE for 32-bit.
- Implement EBPF for 32-bit.
- Convert 32-bit to do interrupt entry/exit in C.
- Convert 64-bit BookE to do interrupt entry/exit in C.
- Changes to our signal handling code to use user_access_begin/end() more extensively.
- Add support for time namespaces (CONFIG_TIME_NS)
- A series of fixes that allow us to reenable STRICT_KERNEL_RWX.
- Other smaller features, fixes & cleanups.
Thanks to: Alexey Kardashevskiy, Andreas Schwab, Andrew Donnellan, Aneesh Kumar K.V,
Athira Rajeev, Bhaskar Chowdhury, Bixuan Cui, Cédric Le Goater, Chen Huang, Chris
Packham, Christophe Leroy, Christopher M. Riedl, Colin Ian King, Dan Carpenter, Daniel
Axtens, Daniel Henrique Barboza, David Gibson, Davidlohr Bueso, Denis Efremov,
dingsenjie, Dmitry Safonov, Dominic DeMarco, Fabiano Rosas, Ganesh Goudar, Geert
Uytterhoeven, Geetika Moolchandani, Greg Kurz, Guenter Roeck, Haren Myneni, He Ying,
Jiapeng Chong, Jordan Niethe, Laurent Dufour, Lee Jones, Leonardo Bras, Li Huafei,
Madhavan Srinivasan, Mahesh Salgaonkar, Masahiro Yamada, Nathan Chancellor, Nathan
Lynch, Nicholas Piggin, Oliver O'Halloran, Paul Menzel, Pu Lehui, Randy Dunlap, Ravi
Bangoria, Rosen Penev, Russell Currey, Santosh Sivaraj, Sebastian Andrzej Siewior,
Segher Boessenkool, Shivaprasad G Bhat, Srikar Dronamraju, Stephen Rothwell, Thadeu Lima
de Souza Cascardo, Thomas Gleixner, Tony Ambardar, Tyrel Datwyler, Vaibhav Jain,
Vincenzo Frascino, Xiongwei Song, Yang Li, Yu Kuai, Zhang Yunkai.
-----BEGIN PGP SIGNATURE-----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=dfKL
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Enable KFENCE for 32-bit.
- Implement EBPF for 32-bit.
- Convert 32-bit to do interrupt entry/exit in C.
- Convert 64-bit BookE to do interrupt entry/exit in C.
- Changes to our signal handling code to use user_access_begin/end()
more extensively.
- Add support for time namespaces (CONFIG_TIME_NS)
- A series of fixes that allow us to reenable STRICT_KERNEL_RWX.
- Other smaller features, fixes & cleanups.
Thanks to Alexey Kardashevskiy, Andreas Schwab, Andrew Donnellan, Aneesh
Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Bixuan Cui, Cédric Le
Goater, Chen Huang, Chris Packham, Christophe Leroy, Christopher M.
Riedl, Colin Ian King, Dan Carpenter, Daniel Axtens, Daniel Henrique
Barboza, David Gibson, Davidlohr Bueso, Denis Efremov, dingsenjie,
Dmitry Safonov, Dominic DeMarco, Fabiano Rosas, Ganesh Goudar, Geert
Uytterhoeven, Geetika Moolchandani, Greg Kurz, Guenter Roeck, Haren
Myneni, He Ying, Jiapeng Chong, Jordan Niethe, Laurent Dufour, Lee
Jones, Leonardo Bras, Li Huafei, Madhavan Srinivasan, Mahesh Salgaonkar,
Masahiro Yamada, Nathan Chancellor, Nathan Lynch, Nicholas Piggin,
Oliver O'Halloran, Paul Menzel, Pu Lehui, Randy Dunlap, Ravi Bangoria,
Rosen Penev, Russell Currey, Santosh Sivaraj, Sebastian Andrzej Siewior,
Segher Boessenkool, Shivaprasad G Bhat, Srikar Dronamraju, Stephen
Rothwell, Thadeu Lima de Souza Cascardo, Thomas Gleixner, Tony Ambardar,
Tyrel Datwyler, Vaibhav Jain, Vincenzo Frascino, Xiongwei Song, Yang Li,
Yu Kuai, and Zhang Yunkai.
* tag 'powerpc-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (302 commits)
powerpc/signal32: Fix erroneous SIGSEGV on RT signal return
powerpc: Avoid clang uninitialized warning in __get_user_size_allowed
powerpc/papr_scm: Mark nvdimm as unarmed if needed during probe
powerpc/kvm: Fix build error when PPC_MEM_KEYS/PPC_PSERIES=n
powerpc/kasan: Fix shadow start address with modules
powerpc/kernel/iommu: Use largepool as a last resort when !largealloc
powerpc/kernel/iommu: Align size for IOMMU_PAGE_SIZE() to save TCEs
powerpc/44x: fix spelling mistake in Kconfig "varients" -> "variants"
powerpc/iommu: Annotate nested lock for lockdep
powerpc/iommu: Do not immediately panic when failed IOMMU table allocation
powerpc/iommu: Allocate it_map by vmalloc
selftests/powerpc: remove unneeded semicolon
powerpc/64s: remove unneeded semicolon
powerpc/eeh: remove unneeded semicolon
powerpc/selftests: Add selftest to test concurrent perf/ptrace events
powerpc/selftests/perf-hwbreak: Add testcases for 2nd DAWR
powerpc/selftests/perf-hwbreak: Coalesce event creation code
powerpc/selftests/ptrace-hwbreak: Add testcases for 2nd DAWR
powerpc/configs: Add IBMVNIC to some 64-bit configs
selftests/powerpc: Add uaccess flush test
...
- Add support for Software Nodes to MFD Core
- Remove support for Device Properties from MFD Core
- Use standard APIs in MFD Core
- New Drivers
- Add support for ROHM BD9576MUF and BD9573MUF PMICs
- Add support for Netronix Embedded Controller, PWM and RTC
- Add support for Actions Semi ATC260x PMICs and OnKey
- New Device Support
- Add support for DG1 PCIe Graphics Card to Intel PMT
- Add support for ROHM BD71815 PMIC to ROHM BD71828
- Add support for Tolino Shine 2 HD to Netronix Embedded Controller
- Add support for AX10 BMC Secure Updates to Intel M10 BMC
- Removed Device Support
- Remove Arizona Extcon support from MFD
- Remove ST-E AB8500 Power Supply code from MFD
- Remove AB3100 altogether
- New Functionality
- Add support for SMBus and I2C modes to Dialog DA9063
- Switch to using Software Nodes in Intel (various)
- New/converted Device Tree bindings; rohm,bd71815-pmic, rohm,bd9576-pmic,
netronix,ntxec, actions,atc260x,
ricoh,rn5t618, qcom-pm8xxx
- Fix-ups
- Fix error handling/path; intel_pmt
- Simplify code; rohm-bd718x7, ab8500-core, intel-m10-bmc
- Trivial clean-ups (reordering, spelling); rohm-generic, rn5t618, max8997
- Use correct data-type; db8500-prcmu
- Remove superfluous code; lp87565, intel_quark_i2c_gpi, lpc_sch, twl
- Use generic APIs/defines; lm3533-core, intel_quark_i2c_gpio
- Regmap related fix-ups; intel-m10-bmc, sec-core
- Reorder resource freeing during remove; intel_quark_i2c_gpio
- Make table indexing more robust; intel_quark_i2c_gpio
- Fix reference imbalances; arizona-irq
- Staticify and (un)constify things; arizona-spi, stmpe, ene-kb3930,
intel-lpss-acpi, intel-lpss-pci,
atc260x-i2c, intel_quark_i2c_gpio
- Bug Fixes
- Fix incorrect (register) values; intel-m10-bmc
- Kconfig related fixes; ABX500_CORE
- Do not clear the Auto Reload Register; stm32-timers
-----BEGIN PGP SIGNATURE-----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=IJSL
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Framework:
- Add support for Software Nodes to MFD Core
- Remove support for Device Properties from MFD Core
- Use standard APIs in MFD Core
New Drivers:
- Add support for ROHM BD9576MUF and BD9573MUF PMICs
- Add support for Netronix Embedded Controller, PWM and RTC
- Add support for Actions Semi ATC260x PMICs and OnKey
New Device Support:
- Add support for DG1 PCIe Graphics Card to Intel PMT
- Add support for ROHM BD71815 PMIC to ROHM BD71828
- Add support for Tolino Shine 2 HD to Netronix Embedded Controller
- Add support for AX10 BMC Secure Updates to Intel M10 BMC
Removed Device Support:
- Remove Arizona Extcon support from MFD
- Remove ST-E AB8500 Power Supply code from MFD
- Remove AB3100 altogether
New Functionality:
- Add support for SMBus and I2C modes to Dialog DA9063
- Switch to using Software Nodes in Intel (various)
New/converted Device Tree bindings:
- rohm bd71815-pmic, rohm bd9576-pmic, netronix ntxec, actions
atc260x, ricoh rn5t618, qcom pm8xxx
- Fix-ups:
- Fix error handling/path; intel_pmt
- Simplify code; rohm-bd718x7, ab8500-core, intel-m10-bmc
- Trivial clean-ups (reordering, spelling); rohm-generic, rn5t618,
max8997
- Use correct data-type; db8500-prcmu
- Remove superfluous code; lp87565, intel_quark_i2c_gpi, lpc_sch, twl
- Use generic APIs/defines; lm3533-core, intel_quark_i2c_gpio
- Regmap related fix-ups; intel-m10-bmc, sec-core
- Reorder resource freeing during remove; intel_quark_i2c_gpio
- Make table indexing more robust; intel_quark_i2c_gpio
- Fix reference imbalances; arizona-irq
- Staticify and (un)constify things; arizona-spi, stmpe, ene-kb3930,
intel-lpss-acpi, intel-lpss-pci, atc260x-i2c, intel_quark_i2c_gpio
Bug Fixes:
- Fix incorrect (register) values; intel-m10-bmc
- Kconfig related fixes; ABX500_CORE
- Do not clear the Auto Reload Register; stm32-timers"
* tag 'mfd-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (84 commits)
mfd: intel-m10-bmc: Add support for MAX10 BMC Secure Updates
Revert "mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell"
mfd: twl: Remove unused inline function twl4030charger_usb_en()
dt-bindings: mfd: Convert pm8xxx bindings to yaml
dt-bindings: mfd: Add compatible for pmk8350 rtc
i2c: designware: Get rid of legacy platform data
mfd: intel_quark_i2c_gpio: Convert I²C to use software nodes
mfd: lpc_sch: Partially revert "Add support for Intel Quark X1000"
mfd: arizona: Fix rumtime PM imbalance on error
mfd: max8997: Replace 8998 with 8997
mfd: core: Use acpi_find_child_device() for child devices lookup
mfd: intel_quark_i2c_gpio: Don't play dirty trick with const
mfd: intel_quark_i2c_gpio: Enable MSI interrupt
mfd: intel_quark_i2c_gpio: Reuse BAR definitions for MFD cell indexing
mfd: ntxec: Support for EC in Tolino Shine 2 HD
mfd: stm32-timers: Avoid clearing auto reload register
mfd: intel_quark_i2c_gpio: Replace I²C speeds with descriptive definitions
mfd: intel_quark_i2c_gpio: Remove unused struct device member
mfd: intel_quark_i2c_gpio: Unregister resources in reversed order
mfd: Kconfig: ABX500_CORE should depend on ARCH_U8500
...
Updates for SoC specific drivers include a few subsystems that
have their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance optimized
for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target module
has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid
issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as we
now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and dra7
- omap-prm driver needs to enable autoidle retention support for omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of using
builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=iidq
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Updates for SoC specific drivers include a few subsystems that have
their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance
optimized for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target
module has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to
avoid issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as
we now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and
dra7
- omap-prm driver needs to enable autoidle retention support for
omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of
using builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP"
* tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
soc: aspeed: fix a ternary sign expansion bug
memory: mtk-smi: Add device-link between smi-larb and smi-common
memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
clk: socfpga: fix iomem pointer cast on 64-bit
soc: aspeed: Adapt to new LPC device tree layout
pinctrl: aspeed-g5: Adapt to new LPC device tree layout
ipmi: kcs: aspeed: Adapt to new LPC DTS layout
ARM: dts: Remove LPC BMC and Host partitions
dt-bindings: aspeed-lpc: Remove LPC partitioning
soc: fsl: enable acpi support in RCPM driver
soc: qcom: mdt_loader: Detect truncated read of segments
soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
soc: qcom: pdr: Fix error return code in pdr_register_listener
firmware: qcom_scm: Fix kernel-doc function names to match
firmware: qcom_scm: Suppress sysfs bind attributes
firmware: qcom_scm: Workaround lack of "is available" call on SC7180
firmware: qcom_scm: Reduce locking section for __get_convention()
firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
...
The parameters of tSU,STA/tHD,STA/tSU,STOP maybe out of spec due
to device clock-stretch or circuit loss, we could get a suitable
scl_int_delay_ns from i2c_timings to compensate these parameters
to meet the spec via EXT_CONF register.
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The right flag is apdma_sync when apdma remove hand-shake signel.
Fixes: 05f6f7271a ("i2c: mediatek: Fix apdma and i2c hand-shake timeout")
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
There are some omissions in the previous patch about replacing
I2C_MAX_FAST_MODE__FREQ with I2C_MAX_FAST_MODE_PLUS_FREQ and
need to fix it.
Fixes: b44658e755b5("i2c: mediatek: Send i2c master code at more than 1MHz")
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
While adding the invalid IRQ check after calling platform_get_irq(),
I managed to overlook that the driver has a complex error path in its
probe() method, thus a simple *return* couldn't be used. Use a proper
*goto* instead!
Fixes: e5b2e3e742 ("i2c: sh7760: add IRQ check")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add PCI ID of SMBus controller on Intel Alder Lake PCH-M.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fix the following checkpatch error:
#614: FILE: drivers/i2c/i2c-core-base.c:614:
+ len = acpi_device_modalias(dev, buf, PAGE_SIZE -1);
^
No functional changes.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Use of_device_get_match_data() to make the code slightly smaller.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sylwester Nawrocki <snawrocki@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fix the following checkpatch errors:
ERROR: space prohibited before that ',' (ctx:WxW)
#280: FILE: drivers/i2c/busses/i2c-nomadik.c:280:
+ i2c_clr_bit(dev->virtbase + I2C_CR , I2C_CR_PE);
^
ERROR: space prohibited before that ',' (ctx:WxW)
#528: FILE: drivers/i2c/busses/i2c-nomadik.c:528:
+ i2c_set_bit(dev->virtbase + I2C_CR , I2C_CR_PE);
^
No functional changes.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Zihao Tang <tangzihao1@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fix 20 checkpatch errors.
Among these errors, 18 of them are incorrect space usage, such as:
ERROR: space prohibited after that open parenthesis '('
#128: FILE: drivers/i2c/busses/i2c-iop3xx.c:128:
+ if ( !rc ) rc = -I2C_ERR_BERR
The remaining two errors are trailing statements should be on next line,
such as:
ERROR: trailing statements should be on next line
#128: FILE: drivers/i2c/busses/i2c-iop3xx.c:128:
+ if ( !rc ) rc = -I2C_ERR_BERR;
No functional changes.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Zihao Tang <tangzihao1@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fix the following checkpatch errors:
ERROR: "foo * bar" should be "foo *bar"
#189: FILE: drivers/i2c/busses/i2c-amd8111.c:189:
ERROR: "foo * bar" should be "foo *bar"
#191: FILE: drivers/i2c/busses/i2c-amd8111.c:191:
ERROR: switch and case should be at the same indent
#201: FILE: drivers/i2c/busses/i2c-amd8111.c:201:
ERROR: switch and case should be at the same indent
#359: FILE: drivers/i2c/busses/i2c-amd8111.c:359:
No functional changes.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Zihao Tang <tangzihao1@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
I noticed a weird bug with this driver on Marvell CN9130 Customer
Reference Board.
Sometime after boot, the system locks with the following message:
[104.071363] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
The system does not respond afterwards, only warns about RCU stalls.
This first appeared with commit e5c02cf541 ("i2c: mv64xxx: Add runtime
PM support").
With further experimentation I discovered that adding a delay into
mv64xxx_i2c_hw_init() fixes this issue. This function is called before
every xfer, due to how runtime PM works in this driver. It seems that in
order to work correctly, a delay is needed after the bus is reset in
this function.
Since there already is a known erratum with this controller needing a
delay, I assume that this is just another place this needs to be
applied. Therefore I apply the delay only if errata_delay is true.
Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
devm_platform_ioremap_resource() prints a message in case of error.
Drop custom one.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Use the device_get_match_data() helper instead of open coding.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Use __maybe_unused for the suspend()/resume() hooks and get rid of
the CONFIG_PM_SLEEP ifdeffery to improve the code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The peripheral clock is optional and we may get an -EPROBE_DEFER error code
which would not be propagated correctly, fix this by using
devm_clk_get_optional().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Use SPDX-License-Identifier and add copyright for Allied Telesis
because of the reasonably large rewrite in the preceding patch.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The fsl-i2c controller will generate an interrupt after every byte
transferred. Make use of this interrupt to drive a state machine which
allows the next part of a transfer to happen as soon as the interrupt is
received. This is particularly helpful with SMBUS devices like the LM81
which will timeout if we take too long between bytes in a transfer.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Platform data is a legacy interface to supply device properties
to the driver. In this case we don't have anymore in-kernel users
for it. Just remove it for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
Fixes: a26c20b1fa ("i2c: Renesas SH7760 I2C master driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with the
invalid IRQ #s.
Fixes: 6ccbe60713 ("i2c: add Renesas R-Car I2C driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
Fixes: b5b5b32081 ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
Fixes: ba92222ed6 ("i2c: jz4780: Add i2c bus controller driver for Ingenic JZ4780")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
Fixes: 5faf6e1f58 ("i2c: emev2: add driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
Fixes: df8eb5691c ("i2c: Add driver for Cadence I2C controller")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
pm_runtime_get_sync() will increment the PM reference count even on
failure. Forgetting to put the reference again will result in a leak.
Replace it with pm_runtime_resume_and_get() to keep the usage counter
balanced.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Weihua <yeweihua4@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The PM reference count is not expected to be incremented on
return in xiic_xfer and xiic_i2c_remove.
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 10b17004a7 ("i2c: xiic: Fix the clocking across bind unbind")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The PM reference count is not expected to be incremented on
return in these stm32f7_i2c_xx serious functions.
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: ea6dd25dee ("i2c: stm32f7: add PM_SLEEP suspend/resume support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The PM reference count is not expected to be incremented on
return in sprd_i2c_master_xfer() and sprd_i2c_remove().
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 8b9ec07198 ("i2c: Add Spreadtrum I2C controller driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The PM reference count is not expected to be incremented on
return in omap_i2c_probe() and omap_i2c_remove().
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here. I Replace it with pm_runtime_resume_and_get
to keep usage counter balanced.
What's more, error path 'err_free_mem' seems not like a proper
name any more. So I change the name to err_disable_pm and move
pm_runtime_disable below, for pm_runtime of 'pdev->dev' should
be disabled when pm_runtime_resume_and_get fails.
Fixes: 3b0fb97c8d ("I2C: OMAP: Handle error check for pm runtime")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In i2c_imx_xfer() and i2c_imx_remove(), the pm reference count
is not expected to be incremented on return.
However, pm_runtime_get_sync will increment pm reference count
even failed. Forgetting to putting operation will result in a
reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 3a5ee18d2a ("i2c: imx: implement master_xfer_atomic callback")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The PM reference count is not expected to be incremented on
return in lpi2c_imx_master_enable.
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 13d6eb20fc ("i2c: imx-lpi2c: add runtime pm support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The PM reference count is not expected to be incremented on
return in functions img_i2c_xfer and img_i2c_init.
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 93222bd9b9 ("i2c: img-scb: Add runtime PM")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The PM reference count is not expected to be incremented on
return in functions cdns_i2c_master_xfer and cdns_reg_slave.
However, pm_runtime_get_sync will increment pm usage counter
even failed. Forgetting to putting operation will result in a
reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 7fa32329ca ("i2c: cadence: Move to sensible power management")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In mpc_i2c_get_fdr_8xxx div is assigned as we iterate through the
mpc_i2c_dividers_8xxx array. By the time we exit the loop div will
either have the value that matches the requested speed or be pointing at
the last entry in mpc_i2c_dividers_8xxx. Checking for div being NULL
after the loop is redundant so remove the check.
Reported-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
It's not necessary to release resource which allocated with devm_*
and those release may leads to a double free. And also remove useless
irq_dispose_mapping() call since mapping not created.
Fixes: 09aab7add7 ("i2c: mpc: use device managed APIs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Use device managed functions an clean up error handling.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
All the in-tree dts files that use one of the compatible strings from
i2c-mpc.c provide an interrupt property. By making this mandatory we
can simplify the code.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Move the existing calls of mpc_i2c_fixup() to a recovery function
registered via bus_recovery_info. This makes it more obvious that
recovery is supported and allows for a future where recovery is
triggered by the i2c core.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
More and more drivers rely on devres to manage their resources, however
if bus' probe() and release() methods are not trivial and control some
of resources as well (for example enable or disable clocks, or attach
device to a power domain), we need to make sure that driver-allocated
resources are released immediately after driver's remove() method
returns, and not postponed until driver core gets around to releasing
resources. To fix that we open a new devres group before calling
driver's probe() and explicitly release it when we return from driver's
remove().
Tested-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Use generic i2c_freq_mode_string() helper to print chosen bus speed.
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add HiSilicon I2C controller driver for the Kunpeng SoC. It provides
the access to the i2c busses, which connects to the eeprom, rtc, etc.
The driver works with IRQ mode, and supports basic I2C features and 10bit
address. The DMA is not supported.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Some I2C drivers like Designware and HiSilicon will print the
bus frequency mode information, so add a public one that everyone
can make use of.
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Some I2C controller drivers will only unregister the I2C
adapter in their .remove() callback, which can be done
by simply using a managed variant to add the I2C adapter.
So add the managed functions for adding the I2C adapter.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
From now on only accepting complete software nodes.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Complete software node can now be supplied to the device
with struct i2c_board_info.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Max Staudt <max@enpas.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Additional device properties are always just a part of a
software fwnode. If the device properties are constant, the
software node can also be constant.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Additional device properties are always just a part of a
software fwnode. If the device properties are constant, the
software node can also be constant.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This makes it possible for the drivers to assign complete
software fwnodes to the devices instead of only the device
properties in those nodes.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> # for brcmstb
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Use devm_add_action_or_reset() instead of devres_alloc() and
devres_add(), which works the same. This will simplify the
code. There is no functional change.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In case of error, the function i2c_new_client_device() returns
ERR_PTR() and never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().
Fixes: 17631e8ca2 ("i2c: designware: Add driver support for AMD NAVI GPU")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The top comment is not a kerneldoc, as W=1 build reports:
drivers/i2c/busses/i2c-exynos5.c:39: warning:
expecting prototype for i2c(). Prototype was for HSI2C_CTL() instead
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
They return 0 always, so save some lines and code.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Since commit bc1c2048ab ("i2c: bpmp-tegra: Ignore unknown I2C_M
flags") we don't need to mask out flags and can keep the input variable
as is to save quite some lines.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Since we have generic definitions for bus frequencies, let's use them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Khalil Blaiech <kblaiech@nvidia.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The Latest AMD NAVI GPU card has an integrated Type-C controller and
Designware I2C with PCI Interface. The PD controller for USB Type-C can
be accessed over I2C. The client driver is part of the USB Type-C UCSI
driver.
Also, there exists a couple of notable IP limitations that are dealt as
workarounds:
- I2C transaction work on a polling mode as IP does not generate
interrupt.
- I2C read command sent twice to address the IP issues.
- AMD NAVI GPU based products are already in the commercial market,
hence some of the I2C parameters are statically programmed as they
can not be part of the ACPI table.
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Co-developed-by: Nehal Bakulchandra Shah <Nehal-Bakulchandra.shah@amd.com>
Signed-off-by: Nehal Bakulchandra Shah <Nehal-Bakulchandra.shah@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Create an i2c_adapter for CP2615's I2C master interface
Signed-off-by: Bence Csókás <bence98@sch.bme.hu>
[wsa: switched to '__packed', added some 'static' and an include]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When hardware doesn't support High Speed Mode, we forget bus_freq_hz
timing adjustment. This makes the timings and real registers being
unsynchronized. Adjust bus_freq_hz when refuse high speed mode set.
Fixes: b6e67145f1 ("i2c: designware: Enable high speed mode")
Reported-by: "Song Bao Hua (Barry Song)" <song.bao.hua@hisilicon.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
s/Hisilicon/HiSilicon/g.
It should use capital S, according to
https://www.hisilicon.com/en/terms-of-use.
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The i2c_recover_bus() returns -EOPNOTSUPP if bus recovery isn't wired up
by the bus driver, which the case for Tegra I2C driver for example. This
error code is then propagated to I2C client and might be confusing, thus
make i2c_recover_bus() to return -EBUSY instead.
Suggested-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fix the following coccicheck report:
drivers/i2c/busses/i2c-stm32f7.c:2032:3-10 : platform_get_irq :
line 2032 is redundant because platform_get_irq() already prints an error
Remove dev_err() messages after platform_get_irq() failures.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Zihao Tang <tangzihao1@hisilicon.com>
Reviewed-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Inspect a message's return value upon successful IVC transaction to
determine if the I2C transaction on the BPMP side was successful.
Heavily based on work by Timo Alho <talho@nvidia.com>.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Only send "X1000_I2C_DC_STOP" when last byte, or it will cause
error when I2C write operation which should look like this:
device_addr + w, reg_addr, data;
But without this patch, it looks like this:
device_addr + w, reg_addr, device_addr + w, data;
Fixes: 21575a7a8d ("I2C: JZ4780: Add support for the X1000.")
Reported-by: 杨文龙 (Yang Wenlong) <ywltyut@sina.cn>
Tested-by: 杨文龙 (Yang Wenlong) <ywltyut@sina.cn>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
ARCH_SOCFPGA is being renamed to ARCH_INTEL_SOCFPGA so adjust the
32-bit ARM drivers to rely on new symbol.
The side effect is that the I2C_ALTERA will now be available for both
32-bit and 64-bit Intel SoCFPGA, even though it is used only for 32-bit.
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
In some configurations, recovery is optional. So, don't throw an error
when it is not used because e.g. pinctrl settings for recovery are not
provided. Reword the message and make it debug output.
Reported-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: stable@kernel.org
The buggy parameters currently get caught later, but emit a noisy WARN.
Userspace should not be able to trigger this, so add similar checks much
earlier. Also avoids some unneeded code paths, of course. Apply kernel
coding stlye to a comment while here.
Reported-by: syzbot+ffb0b3ffa6cfbc7d7b3f@syzkaller.appspotmail.com
Tested-by: syzbot+ffb0b3ffa6cfbc7d7b3f@syzkaller.appspotmail.com
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The ACPI_MODULE_NAME() definition is only used by the message
printing macros from ACPICA that are not used by the code in
question, so it is redundant. Drop it.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The driver does the correct thing, so no need to question it.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
To help debugging issues, add the address of the slave being
accessed when getting an error.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add the support for the i2c-digital-filter binding, allowing to enable
the digital filter via the device-tree and indicate its value in the DT.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Replace driver internally coded enabling/disabling of the
analog-filter with the DT binding "i2c-analog-filter".
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When the driver starts to send a message with the MASTER_ID field
set (high speed), the whole I2C_ADDR register is overwritten including
MASTER_ID as the SLV_ADDR_MAS field is set.
This patch preserves already written fields in I2C_ADDR when writing
SLV_ADDR_MAS.
Fixes: 8a73cd4cfa ("i2c: exynos5: add High Speed I2C controller driver")
Signed-off-by: Mårten Lindahl <martenli@axis.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This reverts commit e0371298dd. It was
accidently applied despite discussion still going on.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Stephen Boyd <swboyd@chromium.org>
IC_DATA_CMD[11] indicates the first data byte received after the address
phase for receive transfer in Master receiver or Slave receiver mode,
this bit was set in some transfer flow. IC_DATA_CMD[7:0] contains the
data to be transmitted or received on the I2C bus, so we should use the
lower 8 bits to get the real data length.
Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The brcmstb_send_i2c_cmd currently has a condition that is (CMD_RD ||
CMD_WR) which always evaluates to true, while the obvious fix is to test
whether the cmd variable passed as parameter holds one of these two
values.
Fixes: dd1aa2524b ("i2c: brcmstb: Add Broadcom settop SoC i2c controller driver")
Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
- Generalise byte swapping assembly
- Update debug addresses for STI
- Validate start of physical memory with DTB
- Do not clear SCTLR.nTLSMD in decompressor
- amba/locomo/sa1111 devices remove method return type is void
- address markers for KASAN in page table dump
-----BEGIN PGP SIGNATURE-----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=BULT
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
- Generalise byte swapping assembly
- Update debug addresses for STI
- Validate start of physical memory with DTB
- Do not clear SCTLR.nTLSMD in decompressor
- amba/locomo/sa1111 devices remove method return type is void
- address markers for KASAN in page table dump
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9065/1: OABI compat: fix build when EPOLL is not enabled
ARM: 9055/1: mailbox: arm_mhuv2: make remove callback return void
amba: Make use of bus_type functions
amba: Make the remove callback return void
vfio: platform: simplify device removal
amba: reorder functions
amba: Fix resource leak for drivers without .remove
ARM: 9054/1: arch/arm/mm/mmu.c: Remove duplicate header
ARM: 9053/1: arm/mm/ptdump:Add address markers for KASAN regions
ARM: 9051/1: vdso: remove unneded extra-y addition
ARM: 9050/1: Kconfig: Select ARCH_HAVE_NMI_SAFE_CMPXCHG where possible
ARM: 9049/1: locomo: make locomo bus's remove callback return void
ARM: 9048/1: sa1111: make sa1111 bus's remove callback return void
ARM: 9047/1: smp: remove unused variable
ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ cores
ARM: 9045/1: uncompress: Validate start of physical memory against passed DTB
ARM: 9042/1: debug: no uncompress debugging while semihosting
ARM: 9041/1: sti LL_UART: add STiH418 SBC UART0 support
ARM: 9040/1: use DEBUG_UART_PHYS and DEBUG_UART_VIRT for sti LL_UART
ARM: 9039/1: assembler: generalize byte swapping macro into rev_l
Pull i2c updates from Wolfram Sang:
- mostly driver updates. Bigger ones for mlxcpld and iproc. But most of
them are all over the place.
- removal of the efm32, sirf, u300, and zte zx bus drivers because of
platform removal. So, we have a pleasant diffstat this time.
- first set of cleanups in the I2C core as preparation to increase
maximum length of SMBus transfers to 255 (as specified in the new
standard). Better documentation of struct i2c_msg and its flags stand
out here.
- the testunit can now respond to SMBus block process calls which is
the testcase when implementing the above new maximum length.
* 'i2c/for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (62 commits)
i2c: remove redundant error print in stm32f7_i2c_probe
i2c: testunit: add support for block process calls
i2c: busses: Replace spin_lock_irqsave with spin_lock in hard IRQ
dt-bindings: eeprom: at24: Document ROHM BR24G01
i2c: i801: Add support for Intel Alder Lake PCH-P
i2c: mv64xxx: Fix check for missing clock after adding RPM
i2c: mux: mlxcpld: Add callback to notify mux creation completion
i2c: mux: mlxcpld: Extend supported mux number
i2c: mux: mlxcpld: Extend driver to support word address space devices
i2c: mux: mlxcpld: Get rid of adapter numbers enforcement
i2c: mux: mlxcpld: Prepare mux selection infrastructure for two-byte support
i2c: mux: mlxcpld: Convert driver to platform driver
i2c: imx: Synthesize end of transaction events without idle interrupts
i2c: i2c-qcom-geni: Add shutdown callback for i2c
i2c: mv64xxx: Add runtime PM support
i2c: amd-mp2: Remove unused macro
i2c: amd-mp2: convert to PCI logging functions
i2c: mux: mlxcpld: Move header file out of x86 realm
platform/x86: mlxcpld: Update module license
i2c: mux: mlxcpld: Update module license
...
A relatively calm release at this time, and no massive code changes
are found in the stats, while a wide range of code refactoring and
cleanup have been done.
Note that this update includes the tree-wide trivial changes for
dropping the return value from ISA remove callbacks, too.
Below lists up some highlight:
* ALSA Core:
- Support for the software jack injection via debugfs
- Fixes for sync_stop PCM operations
* HD-audio and USB-audio:
- A few usual HD-audio device quirks
- Updates for Tegra HD-audio
- More quirks for Pioneer and other USB-audio devices
- Stricter state checks at USB-audio disconnection
* ASoC:
- Continued code refactoring, cleanup and fixes in ASoC core API
- A KUnit testsuite for the topology code
- Lots of ASoC Intel driver Realtek codec updates, quirk additions and
fixes
- Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured
nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro
- Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers
* Others:
- Drop return value from ISA driver remove callback
- Cleanup with DIV_ROUND_UP() macro
- FireWire updates, HDSP output loopback support
-----BEGIN PGP SIGNATURE-----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=QgvS
-----END PGP SIGNATURE-----
Merge tag 'sound-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"A relatively calm release at this time, and no massive code changes
are found in the stats, while a wide range of code refactoring and
cleanup have been done.
Note that this update includes the tree-wide trivial changes for
dropping the return value from ISA remove callbacks, too.
Below lists up some highlight:
ALSA Core:
- Support for the software jack injection via debugfs
- Fixes for sync_stop PCM operations
HD-audio and USB-audio:
- A few usual HD-audio device quirks
- Updates for Tegra HD-audio
- More quirks for Pioneer and other USB-audio devices
- Stricter state checks at USB-audio disconnection
ASoC:
- Continued code refactoring, cleanup and fixes in ASoC core API
- A KUnit testsuite for the topology code
- Lots of ASoC Intel driver Realtek codec updates, quirk additions
and fixes
- Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured
nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro
- Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers
Others:
- Drop return value from ISA driver remove callback
- Cleanup with DIV_ROUND_UP() macro
- FireWire updates, HDSP output loopback support"
* tag 'sound-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (322 commits)
ALSA: hda: intel-dsp-config: add Alder Lake support
ASoC: soc-pcm: fix hw param limits calculation for multi-DAI
ASoC: Intel: bytcr_rt5640: Add quirk for the Acer One S1002 tablet
ASoC: Intel: bytcr_rt5651: Add quirk for the Jumper EZpad 7 tablet
ASoC: Intel: bytcr_rt5640: Add quirk for the Voyo Winpad A15 tablet
ASoC: Intel: bytcr_rt5640: Add quirk for the Estar Beauty HD MID 7316R tablet
ASoC: soc-pcm: fix hwparams min/max init for dpcm
ALSA: hda/realtek: Quirk for HP Spectre x360 14 amp setup
ALSA: usb-audio: Add implicit fb quirk for BOSS GP-10
ALSA: hda: Add another CometLake-H PCI ID
ASoC: soc-pcm: add soc_pcm_hw_update_format()
ASoC: soc-pcm: add soc_pcm_hw_update_chan()
ASoC: soc-pcm: add soc_pcm_hw_update_rate()
ASoC: wm_adsp: Remove unused control callback structure
ASoC: SOF: relax ABI checks and avoid unnecessary warnings
ASoC: codecs: lpass-tx-macro: add dapm widgets and route
ASoC: codecs: lpass-tx-macro: add support for lpass tx macro
ASoC: qcom: dt-bindings: add bindings for lpass tx macro codec
ASoC: codecs: lpass-rx-macro: add iir widgets
ASoC: codecs: lpass-rx-macro: add dapm widgets and route
...
There are a lot of platforms that have not seen any interesting code
changes in the past five years or more.
I made a list and asked around which ones are no longer in use [1], and
received confirmation about six ARM platforms and the TI C6x architecture
that have all reached the end of their life upstream, with no known
users remaining:
- efm32 -- added in 2011, first Cortex-M, no notable changes after 2013
- picoxcell -- added in 2011, abandoned after 2012 acquisition
- prima2 -- added in 20111, no notable changes since 2015
- tango -- added in 2015, sporadic changes until 2017, but abandoned
- u300 -- added in 2009, no notable changes since 2013
- zx --added in 2015 for both 32, 2017 for 64 bit, no notable changes
- arch/c6x -- added in 2011, but work stalled soon after that
A number of other platforms on the original list turned out to still
have users. In some cases there are out-of-tree patches and users
that plan to contribute them in the future, in other cases the code
is complete and works reliably.
[1] https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=pf3b
-----END PGP SIGNATURE-----
Merge tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform removals from Arnd Bergmann:
"There are a lot of platforms that have not seen any interesting code
changes in the past five years or more.
I made a list and asked around which ones are no longer in use, and
received confirmation about six ARM platforms and the TI C6x
architecture that have all reached the end of their life upstream,
with no known users remaining:
- efm32 - added in 2011, first Cortex-M, no notable changes after 2013
- picoxcell - added in 2011, abandoned after 2012 acquisition
- prima2 - added in 20111, no notable changes since 2015
- tango - added in 2015, sporadic changes until 2017, but abandoned
- u300 - added in 2009, no notable changes since 2013
- zx - added in 2015 for both 32, 2017 for 64 bit, no notable changes
- arch/c6x - added in 2011, but work stalled soon after that
A number of other platforms on the original list turned out to still
have users. In some cases there are out-of-tree patches and users that
plan to contribute them in the future, in other cases the code is
complete and works reliably"
Link: https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/
* tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: remove u300 platform
ARM: remove tango platform
ARM: remove zte zx platform
ARM: remove sirf prima2/atlas platforms
c6x: remove architecture
MAINTAINERS: Remove deleted platform efm32
ARM: drop efm32 platform
ARM: Remove PicoXcell platform support
ARM: dts: Remove PicoXcell platforms
Another quiet release in terms of features, though several of the
drivers got quite a bit of work and there were a lot of general changes
resulting from Morimoto-san's ongoing cleanup work.
- As ever, lots of hard work by Morimoto-san cleaning up the code and
making it more consistent.
- Many improvements in the Intel drivers including a wide range of
quirks and bug fixes.
- A KUnit testsuite for the topology code.
- Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured
nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro
- Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmAtZ7cACgkQJNaLcl1U
h9DD5Af/eeERQ2uVOqtw0If+XL1xRYe6RewgDoNcO/l/5WxBLrBH6NbEf0OwNJeg
vzZAkUBtxmx6XiW2M/h+4ucW1OPcg5IzxIWTHfGDMlKIxzb0jgWugRnJ7sdTnOs3
c+QHnvuOT7QzZBviAIkc5uZ5thAImYF8zDyKoGF5llztmnBYymtgpnvnRNZGM0ou
76oUzSvkCFI2b0Yf6bpGok2nBVlOu82HSHOUKjXVWk+LAeiivlYGOEZpdIKEe3S8
u6atQJ29XRr52Yuc2z4xnFQTW1cIDlwj2Fk5x/z8hX+5nRhNSGuIv1l5m7TfBj3e
mCO9cltKZxly0NXysgekn95JHwwwkA==
=MJSb
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.12' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.12
Another quiet release in terms of features, though several of the
drivers got quite a bit of work and there were a lot of general changes
resulting from Morimoto-san's ongoing cleanup work.
- As ever, lots of hard work by Morimoto-san cleaning up the code and
making it more consistent.
- Many improvements in the Intel drivers including a wide range of
quirks and bug fixes.
- A KUnit testsuite for the topology code.
- Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured
nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro
- Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers.
Coccinelle reports a redundant error print in stm32f7_i2c_probe.
As 'platform_get_irq' already prints the error message, error
print here is redundant and can be removed.
Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The digital filter related computation are present in the driver
however the programming of the filter within the IP is missing.
The maximum value for the DNF is wrong and should be 15 instead of 16.
Fixes: aeb068c572 ("i2c: i2c-stm32f7: add driver")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Devices offering SMBus block process calls are rare, so add it to the
testunit. This is also a good test case for testing proper
I2C_M_RECV_LEN flag handling of I2C bus masters emulating SMBus.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
There is no need to do irqsave and irqrestore in context of hard IRQ.
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add PCI ID of SMBus controller on Intel Alder Lake PCH-P.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In commit e5c02cf541 ("i2c: mv64xxx: Add runtime PM support"), error
pointers to optional clocks were replaced by NULL to simplify the resume
callback implementation. However, that commit missed that the IS_ERR
check in mv64xxx_of_config should be replaced with a NULL check. As a
result, the check always passes, even for an invalid device tree.
Fixes: e5c02cf541 ("i2c: mv64xxx: Add runtime PM support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add notification to inform caller that mux objects array has been
created. It allows to user, invoked platform device registration for
"i2c-mux-mlxcpld" driver, to be notified that mux infrastructure is
available, and thus some devices could be connected to this
infrastructure.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Allow to extend mux number supported by driver.
Currently it is limited by eight, which is not enough for new coming
Mellanox modular system with line cards, which require up to 64 mux
support.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Extend driver to allow I2C routing control through CPLD devices with
word address space. Till now only CPLD devices with byte address space
have been supported.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Do not set the argument 'force_nr' of i2c_mux_add_adapter() routine,
instead provide argument 'chan_id'.
Rename mux ids array from 'adap_ids' to 'chan_ids'.
The motivation is to prepare infrastructure to be able to:
- Create only the child adapters which are actually needed - for which
channel ids are specified.
- To assign 'nrs' to these child adapters dynamically, with no 'nr'
enforcement.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Allow to program register value zero to the mux register, which is
required for word address mux register space support.
Change key selector type from 'unsigned short' to 'integer' in order to
allow to set it to -1 on deselection.
Rename key selector field from 'last_chan' to 'last_val', since this
fields keeps actually selector value and not channel number.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Convert driver from 'i2c' to 'platform'.
The motivation is to avoid I2C addressing conflict between
‘i2c-mux-cpld’ driver, providing mux selection and deselection through
CPLD ‘mux control’ register, and CPLD host driver. The CPLD is I2C
device and is multi-functional device performing logic for different
components, like LED, ‘hwmon’, interrupt control, watchdog etcetera.
For such configuration CPLD should be host I2C device, connected to the
relevant I2C bus with the relevant I2C address and all others component
drivers are supposed to be its children.
The hierarchy in such case will be like in the below example:
ls /sys/bus/i2c/devices/44-0032
i2c-mux-mlxcpld.44 leds-mlxreg.44 mlxreg-io.44
ls /sys/bus/i2c/devices/44-0032/i2c-mux-mlxcpld.44
channel-0, …, channel-X
Currently this driver is not activated by any kernel driver,
so this conversion doesn’t affect any user.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
