This commit just introduce some basic comments that helps to understand
the overall behavior of some structs.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
OLED panels show no display for large vtotal timings.
[How]
Check if ss is enabled and read from lut for spread spectrum percentage.
Adjust dprefclk as required. DP_DTO adjustment is for edp only.
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Zhongwei <zhongwei.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The previous check for the is_vsc_sdp_colorimetry_supported flag
for MST sink signals did nothing. Simplify the code and use the
same check for MST and SST.
Cc: stable@vger.kernel.org
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In order for display colorimetry to work correctly on DP displays
we need to send the VSC SDP packet. We should only do so for
panels with DPCD revision greater or equal to 1.4 as older
receivers might have problems with it.
Cc: stable@vger.kernel.org
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Xaver Hugl <xaver.hugl@gmail.com>
Cc: Melissa Wen <mwen@igalia.com>
Cc: Agustin Gutierrez <Agustin.Gutierrez@amd.com>
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Wrong logic cause screen corruption.
[How]
Port logic from DCN35/314.
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Fudongwang <fudong.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
We should not be recursively calling the manual trigger programming function when
FAMS is not in use.
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In current implemenation ODM mode is only reset when the last plane is
removed from dc state. For any dc validate we will always remove all
current planes and add new planes. However when switching from no planes
to 1 plane, ODM mode is not reset because no planes get removed. This
has caused an issue where we kept ODM combine when it should have been
remove when a plane is added. The change is to reset ODM mode when
adding the first plane.
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mode_config's max width x height is 4096x2160 and is higher than DWB's
max resolution 3840x2160 which is returned instead.
Cc: stable@vger.kernel.org
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
dynamic memory safety error detector (KASAN) catches and generates error
messages "BUG: KASAN: slab-out-of-bounds" as writeback connector does not
support certain features which are not initialized.
[HOW]
Skip them when connector type is DRM_MODE_CONNECTOR_WRITEBACK.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3199
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a new DCN veriosn 3.5.1 need to load
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the dram_clock_change_latency_us in dcn3_51_soc is initialized twice, so
delete one of them.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Xiang Yang <xiangyang3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCN10 OPTC is used by other DCNs, and in some cases it might be useful
to have V_TOTAL_REGS available. This commit add V_TOTAL_REGS as part of
the TG field.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add boot option to change the ONO powerup flow, impacting
the order of power domains to power up or down first
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit b72a7e0fd0.
It causes a dead loop in dml_prefetch_check.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Qili Lu <qili.lu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For video mode test pattern (i.e. test pattern disable), the call to
rebuild test pattern params for the pipe is skipped. This causes
dynamic disablement of test pattern to not work, as the
test_pattern_params of the pipe will not be updated and retain the
values of the previously enabled test pattern.
[How]
Rebuild test pattern params even when test pattern is video mode,
allowing the pipe to have updated test_pattern_params values.
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
OLED panels show no display for large vtotal timings.
[How]
Check if ss is enabled and read from lut for spread spectrum percentage.
Adjust dprefclk as required. DP_DTO adjustment is for edp only.
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Zhongwei <zhongwei.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The previous check for the is_vsc_sdp_colorimetry_supported flag
for MST sink signals did nothing. Simplify the code and use the
same check for MST and SST.
Cc: stable@vger.kernel.org
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In order for display colorimetry to work correctly on DP displays
we need to send the VSC SDP packet. We should only do so for
panels with DPCD revision greater or equal to 1.4 as older
receivers might have problems with it.
Cc: stable@vger.kernel.org
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Xaver Hugl <xaver.hugl@gmail.com>
Cc: Melissa Wen <mwen@igalia.com>
Cc: Agustin Gutierrez <Agustin.Gutierrez@amd.com>
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
dwb was not POR previosly.
now need to enable dwb in dml2.
Limitation:
HW DML assumes only one DWB
one set of watermark for all 4 watermark sets
one stream has one DWB only.
WB scaling dml input has one set of scaling tap.
(no chroma so far)
needs to follow up
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why and how:
as part of cleanup, need to refactor vpg. It was improperly referenced
as a dcn specfic part of link. the dcn agnostic code needed was ripped out
and put into vpg.h, now in dc/inc/hw.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Parandhaman K <parandhaman.k@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
6.75 Gbps link rate training for DP_TEST_LINK_RATE_RATE_8
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Allen Pan <allen.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Wrong logic cause screen corruption.
[How]
Port logic from DCN35/314.
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Fudongwang <fudong.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
We should not be recursively calling the manual trigger programming function when
FAMS is not in use.
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Changes to support future versions of FAMS.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When Subvp pipe's index is smaller than main pipe's index, the main
pipe's ODM policy is not yet assigned. If we assign subvp pipe's ODM
policy based on main pipe, we will assign uninitialized ODM policy.
[how]
Instead of copying main pipe's policy we copy the main pipe ODM policy
logic. So it doesn't matter whether if main pipe's ODM policy is set,
phantom pipe will always have the same policy because it running the
same calcualtion to derive ODM policy.
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In current implemenation ODM mode is only reset when the last plane is
removed from dc state. For any dc validate we will always remove all
current planes and add new planes. However when switching from no planes
to 1 plane, ODM mode is not reset because no planes get removed. This
has caused an issue where we kept ODM combine when it should have been
remove when a plane is added. The change is to reset ODM mode when
adding the first plane.
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mode_config's max width x height is 4096x2160 and is higher than DWB's
max resolution 3840x2160 which is returned instead.
Cc: stable@vger.kernel.org
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want flexibility to choose how pwrseq instance is mapped to eDP panel
[How]
Add configuration option to choose the pwrseq mapping policy.
When enabled, allow fixed mapping between DIG inst to pwrseq inst.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Lewis Huang <lewis.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit removes the lines that describe the 'streams'
and 'stream_count' parameters and adds a line to describe the 'params'
parameter, which was missing from the original comment block.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2138: warning: Function parameter or member 'params' not described in 'dc_commit_streams'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2138: warning: Excess function parameter 'streams' description in 'dc_commit_streams'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2138: warning: Excess function parameter 'stream_count' description in 'dc_commit_streams'
Fixes: e779f4587f ("drm/amd/display: Add handling for DC power mode")
Cc: Joshua Aberback <joshua.aberback@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit clean up some of the includes used by DCN.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds some comments to make easier to understand the clock
update for DCN 201, the encode function, and other minor comments.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DTN only logs 'pipe_count' instances of MPCC.
However in some cases there are different number of
MPCC than DPP (pipe_count).
[How]
Add mpcc_count parameter to resource_pool and set it
during pool construction and use it for DTN logging of
MPCC state.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit drops the RESERVE0 and RESERVE1 since both of them can be
summarized as RESERVED.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adjust bytes per pixel calculation to use div_u64.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set alpha_en to 0 in some specific color formats.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version pairs with DMUB FW Release 0.0.211.0 for dcn314, dcn35, dcn351
and brings along the following:
- Fix underflow in subvp/non-subvp configs
- Fix compiler warnings
- Add handling for DC power mode
- Add extra logging for DMUB, HUBP and OTG
- Add timing pixel encoding for mst mode validation
- Expand supported Replay residency mode
- Allow HPO PG and RCG for DCN35
- Update pipe topology log to support subvp
- Disable Z8 minimum stutter period check for DCN35
- Enable RCO for HDMISTREAMCLK in DCN35
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to block IPS2 for static screen but allow it for power state
transitions.
[How]
Set DalDisableIPS=6 for DCN35 which allows:
1. RCG during static screen
2. RCG during LVP
3. IPS2 for display off / S0i3
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Enabling higher compiler warning levels results in many issues that can
be trivially resolved as well as some potentially critical issues.
[how]
Fix all compiler warnings found with various compilers and higher
warning levels. Primarily, potentially uninitialized variables and
unreachable code.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Move built test pattern as part of pipe resource update for odm to ensure we rebuild
test pattern params every time we have an ODM update
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Future implementations will require a distinction between AC power and
DC power (wall power and battery power, respectively). To accomplish this,
adding a power mode parameter to certain dc interfaces, and adding a
separate DML2 instance for DC mode validation. Default behaviour unchanged.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When the DML2 wrapper explicitly accesses context->dml2, that creates a
dependency on where dc saves the DML object. This dependency makes it
harder to have multiple co-existing DML objects, which we would like to
have for upcoming functionality.
[How]
- make all DML21 interfaces take in a DML2 object as parameter
- remove all references to context->dml2, use parameter instead
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Add logging for first DMUB inbox message that timed out to diagnostic
data
- It is useful to track the first failed message for debug purposes
because once DMUB becomes hung (typically on a message), it will
remain hung and all subsequent messages. In these cases we're
interested in knowing which is the first message that failed.
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why and how]
External display has corruption because no root clock control function. Add the function pointer to fix the issue.
Reviewed-by: Daniel Miess <daniel.miess@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Xi (Alex) Liu <xi.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The threshold is no longer useful for blocking suboptimal power states
for DCN35 based on real measurement.
[How]
Reduce to the minimum threshold duration, 1us.
Reviewed-by: Gabe Teeger <gabe.teeger@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Add extra logging for DCSURF_FLIP_CNTL, DCHUBP_CNTL,
OTG_MASTER_EN, and OTG_DOUBLE_BUFFER_CONTROL for more
debuggability for a system crash.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why && How]
OTG can be disabled before setting dpms on. Add check to skip wait
when setting AV mute if OTG is disabled.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
dynamic memory safety error detector (KASAN) catches and generates error
messages "BUG: KASAN: slab-out-of-bounds" as writeback connector does not
support certain features which are not initialized.
[HOW]
Skip them when connector type is DRM_MODE_CONNECTOR_WRITEBACK.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3199
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
HPO can be power gated unconditionally for
DCN35.
[How]
Set disable flag to false.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Enable root clock optimization for HDMISTREAMCLK and only
disable it when it's actively being used.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Some issues may require a trace of the previous SMU messages from DC to
understand the context and aid in debugging. Actual logging to be
implemented when needed.
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
As per programming guide, we need to
enable the virtual pixel clock via DTBCLK
DTO and ungate the clock before we begin
programming OPP/OPTC control registers.
Otherwise, the double-buffered registers
will be left pending until the clocks are enabled.
[how]
Move the DTBCLK DTO programming up to
where we do the legacy DP DTO programming.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There is an ambiguity in subvp pipe topology log. The log doesn't show
subvp relation to main stream and it is not clear that certain stream
is an internal stream for subvp pipes.
[how]
Separate subvp pipe topology logging from main pipe topology. Log main
stream indices instead of the internal stream for subvp pipes.
The following is a sample log showing 2 streams with subvp enabled on
both:
pipe topology update
________________________
| plane0 slice0 stream0|
|DPP1----OPP1----OTG1----|
| plane0 slice0 stream1|
|DPP0----OPP0----OTG0----|
| (phantom pipes) |
| plane0 slice0 stream0|
|DPP3----OPP3----OTG3----|
| plane0 slice0 stream1|
|DPP2----OPP2----OTG2----|
|________________________|
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Update dmub and driver interface for future FAMS revisions.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The function to count the number of valid connectors does not
guarantee that the first n indices are valid, only that there
exist n valid indices. When invalid indices are present, this
results in later valid connectors being missed, as processing
would end after checking n indices.
[How]
- count valid indices separately from total indices examined
- add explicit definition of MAX_LINKS
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] Mst slot nums equals to pbn / pbn_div.
Today, pbn_div refers to dm_mst_get_pbn_divider ->
dc_link_bandwidth_kbps. In dp_link_bandwidth_kbps,
which includes effect of FEC overhead already. As
result, we should not include effect of FEC overhead
again while calculating pbn by kpbs_to_peak_pbn
(stream_kbps).
[How] Include FEC overhead within dp_link_bandwidth_kbps.
Remove FEC overhead from kbps_to_peak_pbn.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Dmub provides several Replay residency calculation methods,
but current interface only supports either ALPM or PHY mode
[How]
Modify the interface for supporting different types
of Replay residency calculation.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Leon Huang <leon.huang1@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
With root clock optimization now enabled for DCN35 there
are still RCO registers still not being toggled
[How]
Add in logic to toggle RCO registers for DPPCLK,
DPSTREAMCLK and DSCCLK
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There could be cases that we are transition from MPC to ODM combine.
In this case if we map pipes before unmapping MPC pipes, we might
temporarly run out of pipes. The change reorders pipe resource
allocation. So we unmapping pipes before mapping new pipes.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In two display configuration, switching between subvp and non-subvp
may cause underflow because it moves an existing pipe between
displays
[How]
Create helper function for applying pipe split flags
Apply pipe split flags prior to deciding on subvp
During subvp check, do not merge pipes, so it can retain previous
pipe configuration
Add check for prev odm pipe in subvp check
For single display subvp case, use same odm policy for phantom pipes
as main subvp pipe
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] Mode pbn is not calculated correctly because timing pixel encoding is
not checked within convert_dc_color_depth_into_bpc.
[How] Get mode kbps from dc_bandwidth_in_kbps_from_timing, then calculate
pbn by kbps_to_peak_pbn.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Modified definitions of 1 function and 2 structs to remove warnings on
certain specific compiler configurations due to redefinition.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Mounika Adhuri <moadhuri@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a new DCN veriosn 3.5.1 need to load
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Deduplicate Kconfig entries for CONFIG_CXL_PMU
- Fix unselectable choice entry in MIPS Kconfig, and forbid this
structure
- Remove unused include/asm-generic/export.h
- Fix a NULL pointer dereference bug in modpost
- Enable -Woverride-init warning consistently with W=1
- Drop KCSAN flags from *.mod.c files
-----BEGIN PGP SIGNATURE-----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=tx+2
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Deduplicate Kconfig entries for CONFIG_CXL_PMU
- Fix unselectable choice entry in MIPS Kconfig, and forbid this
structure
- Remove unused include/asm-generic/export.h
- Fix a NULL pointer dereference bug in modpost
- Enable -Woverride-init warning consistently with W=1
- Drop KCSAN flags from *.mod.c files
* tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: Fix typo HEIGTH to HEIGHT
Documentation/llvm: Note s390 LLVM=1 support with LLVM 18.1.0 and newer
kbuild: Disable KCSAN for autogenerated *.mod.c intermediaries
kbuild: make -Woverride-init warnings more consistent
modpost: do not make find_tosym() return NULL
export.h: remove include/asm-generic/export.h
kconfig: do not reparent the menu inside a choice block
MIPS: move unselectable FIT_IMAGE_FDT_EPM5 out of the "System type" choice
cxl: remove CONFIG_CXL_PMU entry in drivers/cxl/Kconfig
The -Woverride-init warn about code that may be intentional or not,
but the inintentional ones tend to be real bugs, so there is a bit of
disagreement on whether this warning option should be enabled by default
and we have multiple settings in scripts/Makefile.extrawarn as well as
individual subsystems.
Older versions of clang only supported -Wno-initializer-overrides with
the same meaning as gcc's -Woverride-init, though all supported versions
now work with both. Because of this difference, an earlier cleanup of
mine accidentally turned the clang warning off for W=1 builds and only
left it on for W=2, while it's still enabled for gcc with W=1.
There is also one driver that only turns the warning off for newer
versions of gcc but not other compilers, and some but not all the
Makefiles still use a cc-disable-warning conditional that is no
longer needed with supported compilers here.
Address all of the above by removing the special cases for clang
and always turning the warning off unconditionally where it got
in the way, using the syntax that is supported by both compilers.
Fixes: 2cd3271b7a ("kbuild: avoid duplicate warning options")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[WHY & HOW]
DCN351 and DCN35 should use the same bounding box and IP settings.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Xi Liu <xi.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
NumFclkLevelsEnabled is used for DcfClocks bounds check
instead of designated NumDcfClkLevelsEnabled.
That can cause array index out-of-bounds access.
[How]
Use designated variable for dcn35 DcfClocks bounds check.
Fixes: a8edc9cc0b ("drm/amd/display: Fix array-index-out-of-bounds in dcn35_clkmgr")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
MPC flow rate control is not needed for DCN30 and above. Current logic
that uses it can result in underflow for certain edge cases (such as
DSC N422 + ODM combine + 422 left edge pixel).
[How]
Remove MPC flow rate control logic and programming for DCN30 and above.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
In some platform out_transfer_func may not be popualted. We need to check
for null before dereferencing it.
Fixes: d2dea1f140 ("drm/amd/display: Generalize new minimal transition path")
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previous patch to allow DTBCLK disable didn't address boot case. Driver
thinks DTBCLK is disabled by default, so we don't send disable message to
PMFW. DTBCLK is then enabled at idle desktop on boot, burning power.
[How]
Set dtbclk_en to true on boot so that disable message is sent during first
commit.
Fixes: 27750e176a ("drm/amd/display: Allow DTBCLK disable for DCN35")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
There were some fixes in dcn35 that need
to be ported over to dcn351 to prevent any
regression.
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Reviewed-by: Liu, Xi (Alex) <xiliu102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to re-enable idle power optimizations after entering PSR. Since,
we get kicked out of idle power optimizations before entering PSR
(entering PSR requires us to write to DCN registers, which isn't allowed
while we are in IPS).
Fixes: a9b1a4f684 ("drm/amd/display: Add more checks for exiting idle in DC")
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This causes flicker on a bunch of eDP panels. The info_packet code
also caused regressions on other OSes that we haven't' seen on Linux
yet, but that is likely due to the fact that we haven't had a chance
to test those environments on Linux.
We'll need to revisit this.
This reverts commit 202260f645.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3207
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3151
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why and how]
Bounding box clocks for DCN351 should be increased as per request
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Xi Liu <xi.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Disabling stream encoder invokes a function that no longer exists.
[How]
Check if the function declaration is NULL in disable stream encoder.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Increase Z8 watermark times from 210->250us and 320->350us.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Natanel Roizenman <natanel.roizenman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
DCN351 and DCN35 should use the same bounding box and IP settings.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Xi Liu <xi.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix some bound and NULL check
- Fix nonseamless transition from ODM + MPO to ODM + subvp
- Allow Z8 when stutter threshold is not met
- Remove plane and stream pointers from dc scratch
- Remove read/write to external register
- Increase number of hpo dp link encoders
- Increase clock table size
- Add new IPS config mode
- Build scaling params when a new plane is appended
- Refactor DML2 interfaces
- Allow idle opts for no flip case on PSR panel
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Driver crashes when pipe idx not set properly
[how]
Add code to skip the pipe that idx not set properly
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Converting the watermark set structure to a union and modifying some interfaces
to accommodate future usage.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Remove several plane and stream pointers from dc for code
refactoring.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Number of hpo dp2 link encoders is increased.
Instances are changed.
[How]
Increased size in resource pool, init for each instance
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Sridevi Arvindekar <sridevi.arvindekar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
To prevent out of bounds error, we need
to increase the clock table size.
Reviewed-by: Xi Liu <xi.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Some panels don't meet the stutter threshold (4k etc), this leads to
power regressions. Allow z8 for panels that don't meet the threshold
but support PSR/replay
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Some panels don't meet the stutter threshold (4k etc), this leads to
power regressions. Allow z8 for panels that don't meet the threshold
but support PSR/replay
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We don't have a way to specify IPS2 for display off but RCG only for
static screen and local video playback.
[How]
Add a new setting that allows RCG only when displays are active but
IPS2 when all displays are off.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
NumFclkLevelsEnabled is used for DcfClocks bounds check
instead of designated NumDcfClkLevelsEnabled.
That can cause array index out-of-bounds access.
[How]
Use designated variable for dcn35 DcfClocks bounds check.
Fixes: a8edc9cc0b ("drm/amd/display: Fix array-index-out-of-bounds in dcn35_clkmgr")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
MPC flow rate control is not needed for DCN30 and above. Current logic
that uses it can result in underflow for certain edge cases (such as
DSC N422 + ODM combine + 422 left edge pixel).
[How]
Remove MPC flow rate control logic and programming for DCN30 and above.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
We are boundling changes in plane state and build scaling params
together. This is to simplify DML code so DML doesn't need to build
scaling params. We are also avoiding rebuilding scaling params for
planes without scaling changes.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
when ODM + MPO is used for all 4 available pipes. Pipe transition will
be nonseamless. Phantom OTG master pipe reuses the secondary OPP head
pipe. There is no possible seamless path to transit to the new
state. The correct logic would be to reuse a secondary DPP pipe as the
phantom OTG master pipe. This way we are able to first transit the
minimal transtion state of new and then transit to new state seamlessly.
current New (nonseamless)
________________________ ________________________
| plane0 slice0 stream0| | plane0 slice0 stream0|
|DPP0----OPP0----OTG0----| |DPP0----OPP0----OTG0----|
| plane1 | | | | plane0 slice1 | |
|DPP2----| | | |DPP2----OPP2----| |
| plane0 slice1 | | | plane0 slice0 stream1|
|DPP1----OPP1----| | |DPP1----OPP1----OTG1----|
| plane1 | | | plane0 slice1 | |
|DPP3----| | |DPP3----OPP3----| |
|________________________| |________________________|
New (seamless) New (minimal transition)
________________________ ________________________
| plane0 slice0 stream0| | plane0 slice0 stream0|
|DPP0----OPP0----OTG0----| |DPP0----OPP0----OTG0----|
| plane0 slice1 | | | plane0 slice1 | |
|DPP1----OPP1----| | |DPP1----OPP1----| |
| plane0 slice0 stream1| |________________________|
|DPP2----OPP2----OTG2----|
| plane0 slice1 | |
|DPP3----OPP3----| |
|________________________|
[how]
Try to acquire free pipes used as secondary DPP pipes from current state
before try to acquire any free pipes for new OTG master pipe.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
In some platform out_transfer_func may not be popualted. We need to check
for null before dereferencing it.
Fixes: d2dea1f140 ("drm/amd/display: Generalize new minimal transition path")
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How}
Some interfaces needed changes to support future architectures.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
These additional callbacks to DC will be required for the DML2 wrapper. Also
consolidate common callbacks for projects to a single location for maintenance.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
We need to remove the reference to these registers to
prevent any usage in the future.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previous patch to allow DTBCLK disable didn't address boot case. Driver
thinks DTBCLK is disabled by default, so we don't send disable message to
PMFW. DTBCLK is then enabled at idle desktop on boot, burning power.
[How]
Set dtbclk_en to true on boot so that disable message is sent during first
commit.
Fixes: 27750e176a ("drm/amd/display: Allow DTBCLK disable for DCN35")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Previously, we'd disabled HPO whenever an HPO display was disconnected. This
caused other HPO displays to blank whenever one was unplugged.
[HOW]
This change restricts HPO enable/disable to dce110_apply_ctx_to_hw and adds a
helper function (dce110_is_hpo_enabled) that returns true if any HPO displays
are present in a context. We compare the current and previous dc ctx to check
whether HPO is transitioning from on to off or vice versa, and adjust the HPO
state accordingly.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Natanel Roizenman <natanel.roizenman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
There were some fixes in dcn35 that need
to be ported over to dcn351 to prevent any
regression.
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Reviewed-by: Liu, Xi (Alex) <xiliu102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to re-enable idle power optimizations after entering PSR. Since,
we get kicked out of idle power optimizations before entering PSR
(entering PSR requires us to write to DCN registers, which isn't allowed
while we are in IPS).
Fixes: a9b1a4f684 ("drm/amd/display: Add more checks for exiting idle in DC")
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
There is a corner case where a single PSR panel
fails to enter idle optimizations if the panel
is not flipping (no planes or DPMS_OFF == true).
This is because the panel will not enter PSR if it's
not flipping, but this will prevent the FW idle opt
path from being executed. To handle this case we will
allow entry to idle opt from driver side even when a
PSR panel is connected under the following scenarios:
1. Only a single PSR panel is connected
2. PSR panel is not flipping
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This causes flicker on a bunch of eDP panels. The info_packet code
also caused regressions on other OSes that we haven't' seen on Linux
yet, but that is likely due to the fact that we haven't had a chance
to test those environments on Linux.
We'll need to revisit this.
This reverts commit 202260f645.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3207
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3151
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix few problems for DCN35
- Fix a bug which dereferences freed memory
- Enable new interface design for alternate scrambling
- Enhance IPS handshake
- Increase Z8 watermark times
- Fix DML2 problem
- Revert patch which cause regression
- Fix problems for dmub idle power optimization
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
For DML2 to decouple it from other DML versions.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
During minimal transition commit, the base state could be freed if it is current state.
This is because after committing minimal transition state, the current state will be
swapped to the minimal transition state and the old current state will be released.
the release could cause the old current state's memory to be freed. However dc
will derefernce this memory when release minimal transition state. Therefore, we
need to retain the old current state until we release minimal transition state.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It was previously disabled for stability purposes, but command
submission causes residency issues in IPS video playback.
[How]
Enable the disallow/reallow pattern back. There's additional checks
now in DMCUB that should make this safer stability wise.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
To enable a new interface so alternate scrambling can be done via
security module.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The hard coded DPM states are only used to fix mismatch states numbers from FW.
[How]
Remove when not needed.
Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Xi Liu <xi.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It's possible to skip parts of the eval and exit sequencing if we know
whether DCN is in IPS2 already or if it's committed to going to idle
and not in IPS2.
[How]
Skip IPS2 entry/exit if DMCUB is idle but the IPS2 commit is not set.
Skip the eval delay if DMCUB is already in IPS2 since we know we need
to exit.
These are turned off by default.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Cursor updates can be preempted by queued flips in some DMs.
The synchronization model causes this to occur within the same thread
at an intermediate level when we insert logs into the OS queue.
Since this occurs on the same thread and we're still holding the lock
(recursively) the cache is coherent.
The exit sequence will run twice since we technically haven't finished
the exit the first time, so we need a way to detect and avoid the
reallow in the middle of this call to prevent the hang on the cursor
update that was preempted.
[How]
Keep a counter that tracks the depth of the exit calls. Do not reallow
until the counter is zero.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why and how]
Bounding box clocks for DCN351 should be increased as per request
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Xi Liu <xi.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Disabling stream encoder invokes a function that no longer exists.
[How]
Check if the function declaration is NULL in disable stream encoder.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Increase Z8 watermark times from 210->250us and 320->350us.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Natanel Roizenman <natanel.roizenman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
APU has different refclk as dGPU which is used for AUX_DPHY setup
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added debug prints for zstate_support and StutterPeriod in
dcn35_decide_zstate_support for testing.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Natanel Roizenman <natanel.roizenman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Even if memory lower power feature policy states that it is disabled,
VPG memory should still be poweerd on if it is currently disabled when
requested.
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
need to apply the debug key check for max displayclk.
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Cursor update can be pre-empted by a request for setting target flip
submission.
This causes an issue where we're in the middle of the exit sequence
trying to log to DM, but the pre-emption starts another DMCUB
command submission that requires being out of idle.
The DC lock aqusition can fail, and depending on the DM/OS interface
it's possible that the function inserted into this thread must not fail.
This means that lock aqusition must be skipped and exit *must* occur.
[How]
Modify when we consider idle as active. Consider it exited only once
the exit has fully finished.
Consider it as entered prior to actual notification.
Since we're on the same core/thread the cached values are coherent
and we'll see that we still need to exit. Once the cursor update resumes
it'll continue doing the double exit but this won't cause a functional
issue, just a (potential) redundant operation.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Clear mpc_tree in init_pipes
- Program pixclk according to dcn revision
- Add stream clock source to DP DTO params
- Enabling urgent latency adjustment for DCN35
- To adjust dprefclk by down spread percentage
- Add debug option for idle reg checks
- Revert few patches which cause regression
- skip forcing odm in minimal transition
- Fix noise issue on HDMI AV mute
- Enable fast update for DCN314
- Enable 2to1 ODM policy for DCN35
- Fix DCN31 underflow problem
- Add the MALL size in the fallback function
- Modify coding style/errors and remove redundant codes
- Add missing registers and offset
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add a Replay residency mode which only calcuates the
entry time based on replay state 0/1 switch.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During init_pipes, otg master is not initialized. So mpc tree is
still configured even if mpc bottom is not active
[How]
For pipes that have tg enabled, check their mpc tree and clear
opp_list if mpc bottom is not active
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Pixel clock programming should be built per dcn revision, not hardcoded to use
dcn20.
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Stream clock source is a required parameter for DP DTO programming.
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pipe_ctx->plane_res.mpcc_inst is of a type that can only hold values
between 0 and 255, so it's always greater than or equal to 0.
Thus the condition 'pipe_ctx->plane_res.mpcc_inst >= 0' was always true
and has been removed.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn35/dcn35_hwseq.c:1023 dcn35_calc_blocks_to_gate() warn: always true condition '(pipe_ctx->plane_res.mpcc_inst >= 0) => (0-255 >= 0)'
Fixes: 6f8b7565cc ("drm/amd/display: Add DCN35 HWSEQ")
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds descriptions for 'new_context', 'srf_updates', and
'surface_count', and removes the excess description for 'context'.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4411: warning: Function parameter or member 'new_context' not described in 'commit_minimal_transition_state_in_dc_update'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4411: warning: Function parameter or member 'srf_updates' not described in 'commit_minimal_transition_state_in_dc_update'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4411: warning: Function parameter or member 'surface_count' not described in 'commit_minimal_transition_state_in_dc_update'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4411: warning: Excess function parameter 'context' description in 'commit_minimal_transition_state_in_dc_update'
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Underflow occurs when running netflix in a 4k144 eDP + 4k60 setup.
Increasing DCFCLK or urgent latency watermark fixes the issue. Implementing
this workaround for now while we figure out why this is happenning in DCN.
[How]
Enable urgent latency adjustment and match the reference to existing ASIC
that also see increased latency at low FCLK.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Leave disabled by default due to sequencing issues around power states
where these flags aren't properly reset.
[How]
Allow re-enabling from DC debug option.
Reviewed-by: Gabe Teeger <gabe.teeger@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In minial transitions state, ODM combine shouldn't be forced as it will
make transition non seamless. The force ODM debug option is to control
the end result not the intermediate transition. So we can temporarily
disable ODM forcing when committing minimal transition state.
[how]
Backup stream ODM forcing option and clear it in minimal transition
state. Once minimal transition state is released, we will restore the
original debug option back.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
This commit just drop some old comments and update a typo in another
one.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Hostvm should be enabled/disabled accordding to the status of
riommu_active, but hostvm always be disabled on DCN31 which causes
underflow
[How]
Set correct hostvm flag on DCN31
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Sherry Wang <Yao.Wang1@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Remove legacy code which is unnecessary.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Enable legacy fast update for DCN314
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
DCN3_16_MIN_COMPBUF_SIZE_KB is defined in the dcn316_resource.c file.
This header fit better in the dcn31_fpu.h together with similar defines.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
If the driver has issues retrieving the MALL size for the specific
hardware, it might fail since the current value is set to zero. This
commit addresses this issue by adding a simple constant value to give
the drive a chance to start.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
This fixes indentations and adjust spaces for better readability and
code styles.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
dcn32_smu_transfer_wm_table_dram_2_smu is defined twice so one is
removed. Also adjust prototype orders.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Enable 2to1 ODM policy for DCN35
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In some of the merge conflict fixes, one '+' was accidentally left at
the beginning of the line. Fortunately, this did not cause any major
issues since it acted as a number signal. This commit addresses this
issue by removing the extra '+'.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 54d9490314 ("drm/amd/display: Set the power_down_on_boot
function pointer to null")
[why & how]
This commit breaks S0i3 entry because DCN does not enter IPS2.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Blackscreen hang @ PC EF000025 when trying to wake up from S0i3. DCN
gets powered off due to dc_power_down_on_boot() being called after
timeout.
[HOW]
Setting the power_down_on_boot function pointer to null since we don't
expect the function to be called for APU.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Support long vblank feature
- Add monitor patch for specific eDP
- Init DPPCLK from SMU on dcn32
- Update odm when ODM combine is changed on an otg master pipe with
no plane
- Fix idle check for shared firmware state
- Add guards for idle on reg read/write
- Guard cursor idle reallow by DC debug option
- Add debug counters to IPS exit prints
- Add left edge pixel for YCbCr422/420 + ODM pipe split
- Amend coasting vtotal for replay low hz
- Refactor DPP into a component directory
- Set the power_down_on_boot function pointer to null
- Implement update_planes_and_stream_v3 sequence
- Lock all enabled otg pipes even with no planes
- Implement wait_for_odm_update_pending_complete
- Add a dc_state NULL check in dc_state_release
- Backup and restore only on full updates
- Update DMUB flags and definitions
- Return the correct HDCP error code
- Add comments to v_total calculation and drop legacy TODO
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
