Currently, when trying to suspend and resume with VirtualPS/2 VMMouse
there is an error message after resuming:
psmouse serio1: vmmouse: Unable to re-enable mouse when reconnecting, err: -6
and the mouse will no longer be operable, requiring full rescan to find a
another driver to use for the port.
This error is due to QEMU still generating PS2 events which the kernel is
not consuming until resume time, where they interfere with mouse
identification and ultimately resulting in an error getting
VMMOUSE_VERSION_ID.
Test scenario:
1) start virtual machine with qemu command "vmport=on"
2) click suspend botton to enter suspend mode
3) resume and observe the error message in the kernel logs
Let's fix this by disabling the vmmouse in its reset handler. This will
notify qemu to stop vmmouse and remove the handler.
Signed-off-by: Zongmin Zhou<zhouzongmin@kylinos.cn>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Link: https://lore.kernel.org/r/20220322021046.1087954-1-zhouzongmin@kylinos.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
If the device is a detachable (and therefore lacks full keyboard), we may
still want to load this driver because the device might have some other
buttons or switches (e.g. volume and power buttons or a tablet mode
switch). In such case we do not want to register the "main" keyboard device
to allow userspace detect when the detachable keyboard is disconnected and
adjust the system behavior for the tablet mode.
Originally it was suggested to simply skip keyboard registration if row and
columns properties didn't exist, but that approach did not convey the
intent strongly enough and also had a slight problem for migrating existing
DTBs without updating the kernel first, so it was decided to introduce new
google,cros-ec-keyb-switches to explicitly mark devices that only have
axillary buttons and switches.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220516183452.942008-3-swboyd@chromium.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Allow the driver to wake the system on key press if the "wakeup-source"
property is provided in the device tree. Using the LRADC as a wakeup
source requires keeping the AVCC domain active during sleep. Since this
has a nontrivial impact on power consumption (sometimes doubling it),
disable the LRADC wakeup source by default.
Signed-off-by: Ondrej Jirman <x@xff.cz>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220424161328.61103-1-samuel@sholland.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The status of the keys connected to the KPDPWR_N and RESIN_N pins
is identified by reading corresponding bits in the interrupt real
time status register. If the status has changed by the time that
the interrupt is handled then a press event will be missed.
Maintain a last known status variable to find unbalanced release
events and simulate press events for each accordingly.
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Link: https://lore.kernel.org/r/20220422191239.6271-6-quic_amelende@quicinc.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
On certain PMICs, an unexpected assertion of KPDPWR_DEB (the
positive logic hardware debounced power key signal) may be seen
during the falling edge of KPDPWR_N (i.e. a power key press) when
it occurs close to the rising edge of SLEEP_CLK. This then
triggers a spurious KPDPWR interrupt.
Handle this issue by adding software debouncing support to ignore
key events that occur within the hardware debounce delay after the
most recent key release event.
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Link: https://lore.kernel.org/r/20220422191239.6271-5-quic_amelende@quicinc.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Variable ret is being assigned a value that is never read, it is
being re-assigned again in either path of the if statement. The
assignment is redundant and can be removed.
Cleans up clang scan build warning:
Although the value stored to 'ret' is used in the enclosing expression,
the value is never actually read from 'ret' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220418142457.84708-1-colin.i.king@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Select callers of iqs7222_parse_props() do not expect a child node
to be derived and returned via pointer. As such, these callers set
**child_node to NULL. However, this pointer is dereferenced in all
cases.
To solve this problem, dereference the pointer only for cases that
expect a child node in the first place. In these cases, the caller
provides a valid pointer.
Fixes: e505edaedc ("Input: add support for Azoteq IQS7222A/B/C")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220417214132.497487-1-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
If fwnode_property_count_u32() returns a negative error code then,
because of type promotion, the "count > ARRAY_SIZE(pins)" condition
will be true. The negative "count" is type promoted to a high unsigned
size_t value.
That means the "else if (count < 0)" condition will always be false and
we don't print that error message or propagate the error code from
fwnode_property_count_u32() as intended.
Fix this by re-ordering the checks so that we check for negative first.
Fixes: e505edaedc ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220412153954.GA15406@kili
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Variable z is being assigned a value that is never read, the
variable is redundant and can be removed.
Cleans up clang scan build warning:
drivers/input/joystick/adi.c:139:6: warning: Although the
value stored to 'z' is used in the enclosing expression,
the value is never actually read from 'z' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220318002318.80519-1-colin.i.king@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add support for the IST3038C touchscreen IC from Imagis, based on
downstream driver. The driver supports multi-touch (10 touch points)
The IST3038C IC supports touch keys, but the support isn't added
because the touch screen used for testing doesn't utilize touch keys.
Looking at the downstream driver, it is possible to add support
for other Imagis ICs of IST30**C series.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Link: https://lore.kernel.org/r/20220305165330.13061-3-markuss.broks@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Let's introduce a common library file for the physmap show function
duplicated between three different keyboard drivers. This largely copies
the code from cros_ec_keyb.c which has the most recent version of the
show function, while using the vivaldi_data struct from the hid-vivaldi
driver. This saves a small amount of space in an allyesconfig build.
$ ./scripts/bloat-o-meter vmlinux.before vmlinux.after
add/remove: 3/0 grow/shrink: 2/3 up/down: 412/-720 (-308)
Function old new delta
vivaldi_function_row_physmap_show - 292 +292
_sub_I_65535_1 1057564 1057616 +52
_sub_D_65535_0 1057564 1057616 +52
e843419@49f2_00062737_9b04 - 8 +8
e843419@20f6_0002a34d_35bc - 8 +8
atkbd_parse_fwnode_data 480 472 -8
atkbd_do_show_function_row_physmap 316 76 -240
function_row_physmap_show 620 148 -472
Total: Before=285581925, After=285581617, chg -0.00%
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # coachz, wormdingler
Link: https://lore.kernel.org/r/20220228075446.466016-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Syzbot reported warning in usb_submit_urb() which is caused by wrong
endpoint type. There was a check for the number of endpoints, but not
for the type of endpoint.
Fix it by replacing old desc.bNumEndpoints check with
usb_find_common_endpoints() helper for finding endpoints
Fail log:
usb 5-1: BOGUS urb xfer, pipe 1 != type 3
WARNING: CPU: 2 PID: 48 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
Modules linked in:
CPU: 2 PID: 48 Comm: kworker/2:2 Not tainted 5.17.0-rc6-syzkaller-00226-g07ebd38a0da2 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
Workqueue: usb_hub_wq hub_event
...
Call Trace:
<TASK>
aiptek_open+0xd5/0x130 drivers/input/tablet/aiptek.c:830
input_open_device+0x1bb/0x320 drivers/input/input.c:629
kbd_connect+0xfe/0x160 drivers/tty/vt/keyboard.c:1593
Fixes: 8e20cf2bce ("Input: aiptek - fix crash on detecting device without endpoints")
Reported-and-tested-by: syzbot+75cccf2b7da87fb6f84b@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20220308194328.26220-1-paskripkin@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
I observed the following problem with the BT404 touch pad
running the Phosh UI:
When e.g. typing on the virtual keyboard pressing "g" would
produce "ggg".
After some analysis it turns out the firmware reports that three
fingers hit that coordinate at the same time, finger 0, 2 and
4 (of the five available 0,1,2,3,4).
DOWN
Zinitix-TS 3-0020: finger 0 down (246, 395)
Zinitix-TS 3-0020: finger 1 up (0, 0)
Zinitix-TS 3-0020: finger 2 down (246, 395)
Zinitix-TS 3-0020: finger 3 up (0, 0)
Zinitix-TS 3-0020: finger 4 down (246, 395)
UP
Zinitix-TS 3-0020: finger 0 up (246, 395)
Zinitix-TS 3-0020: finger 2 up (246, 395)
Zinitix-TS 3-0020: finger 4 up (246, 395)
This is one touch and release: i.e. this is all reported on
touch (down) and release.
There is a field in the struct touch_event called finger_cnt
which is actually a bitmask of the fingers active in the
event.
Rename this field finger_mask as this matches the use contents
better, then use for_each_set_bit() to iterate over just the
fingers that are actally active.
Factor out a finger reporting function zinitix_report_fingers()
to handle all fingers.
Also be more careful in reporting finger down/up: we were
reporting every event with input_mt_report_slot_state(..., true);
but this should only be reported on finger down or move,
not on finger up, so also add code to check p->sub_status
to see what is happening and report correctly.
After this my Zinitix BT404 touchscreen report fingers
flawlessly.
The vendor drive I have notably does not use the "finger_cnt"
and contains obviously incorrect code like this:
if (touch_dev->touch_info.finger_cnt > MAX_SUPPORTED_FINGER_NUM)
touch_dev->touch_info.finger_cnt = MAX_SUPPORTED_FINGER_NUM;
As MAX_SUPPORTED_FINGER_NUM is an ordinal and the field is
a bitmask this seems quite confused.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220228233017.2270599-1-linus.walleij@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Before these changes elan_suspend() would only disable the regulator
when device_may_wakeup() returns false; whereas elan_resume() would
unconditionally enable it, leading to an enable count imbalance when
device_may_wakeup() returns true.
This triggers the "WARN_ON(regulator->enable_count)" in regulator_put()
when the elan_i2c driver gets unbound, this happens e.g. with the
hot-plugable dock with Elan I2C touchpad for the Asus TF103C 2-in-1.
Fix this by making the regulator_enable() call also be conditional
on device_may_wakeup() returning false.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220131135436.29638-2-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
elan_disable_power() is called conditionally on suspend, where as
elan_enable_power() is always called on resume. This leads to
an imbalance in the regulator's enable count.
Move the regulator_[en|dis]able() calls out of elan_[en|dis]able_power()
in preparation of fixing this.
No functional changes intended.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220131135436.29638-1-hdegoede@redhat.com
[dtor: consolidate elan_[en|dis]able() into elan_set_power()]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Because there is no way to detect if the touchscreen has pen support,
the driver is allocating and registering the input_pen input_dev on
receiving the first pen event.
But this means that the input_dev gets allocated after the request_irq()
call which means that the devm framework will free it before disabling
the irq, leaving a window where the irq handler may run and reference the
free-ed input_dev.
To fix this move the allocation of the input_pen input_dev to before
the request_irq() call, while still only registering it on the first pen
event so that the driver does not advertise pen capability on touchscreens
without it (most goodix touchscreens do not have pen support).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220131143539.109142-4-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The input core's error handling for input_alloc_absinfo() failures
is based on ignoring the error until input_register_device() runs
and then checks for the failure like this:
if (test_bit(EV_ABS, dev->evbit) && !dev->absinfo) {
dev_err(&dev->dev, ...);
return -EINVAL;
}
This relies on EV_ABS actually getting set in dev->evbit even
if input_alloc_absinfo() fails, change input_set_abs_params() and
input_set_capability() to actually adhere to this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220131143539.109142-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Make the samsung-keypad driver explicitly depend on CONFIG_HAS_IOMEM, as it
calls devm_ioremap(). This prevents compile errors in some configs (e.g,
allyesconfig/randconfig under UML):
/usr/bin/ld: drivers/input/keyboard/samsung-keypad.o: in function `samsung_keypad_probe':
samsung-keypad.c:(.text+0xc60): undefined reference to `devm_ioremap'
Signed-off-by: David Gow <davidgow@google.com>
Acked-by: anton ivanov <anton.ivanov@cambridgegreys.com>
Link: https://lore.kernel.org/r/20220225041727.1902850-1-davidgow@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When we switch from emulated PS/2 to native (RMI4 or Elan) protocols, we
create SMBus companion devices that are attached to I2C/SMBus controllers.
However, when suspending and resuming, we also need to make sure that we
take into account the PS/2 device they are associated with, so that PS/2
device is suspended after the companion and resumed before it, otherwise
companions will not work properly. Before I2C devices were marked for
asynchronous suspend/resume, this ordering happened naturally, but now we
need to enforce it by establishing device links, with PS/2 devices being
suppliers and SMBus companions being consumers.
Fixes: 172d931910 ("i2c: enable async suspend/resume on i2c client devices")
Reported-and-tested-by: Hugh Dickins <hughd@google.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/89456fcd-a113-4c82-4b10-a9bcaefac68f@google.com
Link: https://lore.kernel.org/r/YgwQN8ynO88CPMju@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
