Port the is_quota_modification() and dqout_transfer() helper to type
safe vfs{g,u}id_t. Since these helpers are only called by a few
filesystems don't introduce a new helper but simply extend the existing
helpers to pass down the mount's idmapping.
Note, that this is a non-functional change, i.e. nothing will have
happened here or at the end of this series to how quota are done! This
a change necessary because we will at the end of this series make
ownership changes easier to reason about by keeping the original value
in struct iattr for both non-idmapped and idmapped mounts.
For now we always pass the initial idmapping which makes the idmapping
functions these helpers call nops.
This is done because we currently always pass the actual value to be
written to i_{g,u}id via struct iattr. While this allowed us to treat
the {g,u}id values in struct iattr as values that can be directly
written to inode->i_{g,u}id it also increases the potential for
confusion for filesystems.
Now that we are have dedicated types to prevent this confusion we will
ultimately only map the value from the idmapped mount into a filesystem
value that can be written to inode->i_{g,u}id when the filesystem
actually updates the inode. So pass down the initial idmapping until we
finished that conversion at which point we pass down the mount's
idmapping.
Since struct iattr uses an anonymous union with overlapping types as
supported by the C standard, filesystems that haven't converted to
ia_vfs{g,u}id won't see any difference and things will continue to work
as before. In other words, no functional changes intended with this
change.
Link: https://lore.kernel.org/r/20220621141454.2914719-7-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Earlier we introduced new helpers to abstract ownership update and
remove code duplication. This converts all filesystems supporting
idmapped mounts to make use of these new helpers.
For now we always pass the initial idmapping which makes the idmapping
functions these helpers call nops.
This is done because we currently always pass the actual value to be
written to i_{g,u}id via struct iattr. While this allowed us to treat
the {g,u}id values in struct iattr as values that can be directly
written to inode->i_{g,u}id it also increases the potential for
confusion for filesystems.
Now that we are have dedicated types to prevent this confusion we will
ultimately only map the value from the idmapped mount into a filesystem
value that can be written to inode->i_{g,u}id when the filesystem
actually updates the inode. So pass down the initial idmapping until we
finished that conversion at which point we pass down the mount's
idmapping.
No functional changes intended.
Link: https://lore.kernel.org/r/20220621141454.2914719-6-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
When delayed allocation is disabled (either through mount option or
because we are running low on free space), ext4_write_begin() allocates
blocks with EXT4_GET_BLOCKS_IO_CREATE_EXT flag. With this flag extent
merging is disabled and since ext4_write_begin() is called for each page
separately, we end up with a *lot* of 1 block extents in the extent tree
and following writeback is writing 1 block at a time which results in
very poor write throughput (4 MB/s instead of 200 MB/s). These days when
ext4_get_block_unwritten() is used only by ext4_write_begin(),
ext4_page_mkwrite() and inline data conversion, we can safely allow
extent merging to happen from these paths since following writeback will
happen on different boundaries anyway. So use
EXT4_GET_BLOCKS_CREATE_UNRIT_EXT instead which restores the performance.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220520111402.4252-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
- Appoint myself page cache maintainer
- Fix how scsicam uses the page cache
- Use the memalloc_nofs_save() API to replace AOP_FLAG_NOFS
- Remove the AOP flags entirely
- Remove pagecache_write_begin() and pagecache_write_end()
- Documentation updates
- Convert several address_space operations to use folios:
- is_dirty_writeback
- readpage becomes read_folio
- releasepage becomes release_folio
- freepage becomes free_folio
- Change filler_t to require a struct file pointer be the first argument
like ->read_folio
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmKNMDUACgkQDpNsjXcp
gj4/mwf/bpHhXH4ZoNIvtUpTF6rZbqeffmc0VrbxCZDZ6igRnRPglxZ9H9v6L53O
7B0FBQIfxgNKHZpdqGdOkv8cjg/GMe/HJUbEy5wOakYPo4L9fZpHbDZ9HM2Eankj
xBqLIBgBJ7doKr+Y62DAN19TVD8jfRfVtli5mqXJoNKf65J7BkxljoTH1L3EXD9d
nhLAgyQjR67JQrT/39KMW+17GqLhGefLQ4YnAMONtB6TVwX/lZmigKpzVaCi4r26
bnk5vaR/3PdjtNxIoYvxdc71y2Eg05n2jEq9Wcy1AaDv/5vbyZUlZ2aBSaIVbtKX
WfrhN9O3L0bU5qS7p9PoyfLc9wpq8A==
=djLv
-----END PGP SIGNATURE-----
Merge tag 'folio-5.19' of git://git.infradead.org/users/willy/pagecache
Pull page cache updates from Matthew Wilcox:
- Appoint myself page cache maintainer
- Fix how scsicam uses the page cache
- Use the memalloc_nofs_save() API to replace AOP_FLAG_NOFS
- Remove the AOP flags entirely
- Remove pagecache_write_begin() and pagecache_write_end()
- Documentation updates
- Convert several address_space operations to use folios:
- is_dirty_writeback
- readpage becomes read_folio
- releasepage becomes release_folio
- freepage becomes free_folio
- Change filler_t to require a struct file pointer be the first
argument like ->read_folio
* tag 'folio-5.19' of git://git.infradead.org/users/willy/pagecache: (107 commits)
nilfs2: Fix some kernel-doc comments
Appoint myself page cache maintainer
fs: Remove aops->freepage
secretmem: Convert to free_folio
nfs: Convert to free_folio
orangefs: Convert to free_folio
fs: Add free_folio address space operation
fs: Convert drop_buffers() to use a folio
fs: Change try_to_free_buffers() to take a folio
jbd2: Convert release_buffer_page() to use a folio
jbd2: Convert jbd2_journal_try_to_free_buffers to take a folio
reiserfs: Convert release_buffer_page() to use a folio
fs: Remove last vestiges of releasepage
ubifs: Convert to release_folio
reiserfs: Convert to release_folio
orangefs: Convert to release_folio
ocfs2: Convert to release_folio
nilfs2: Remove comment about releasepage
nfs: Convert to release_folio
jfs: Convert to release_folio
...
Fix following includecheck warning:
./fs/ext4/inode.c: linux/dax.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220504225025.44753-1-yang.lee@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Hulk Robot reported a BUG_ON:
==================================================================
EXT4-fs error (device loop3): ext4_mb_generate_buddy:805: group 0,
block bitmap and bg descriptor inconsistent: 25 vs 31513 free clusters
kernel BUG at fs/ext4/ext4_jbd2.c:53!
invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 25371 Comm: syz-executor.3 Not tainted 5.10.0+ #1
RIP: 0010:ext4_put_nojournal fs/ext4/ext4_jbd2.c:53 [inline]
RIP: 0010:__ext4_journal_stop+0x10e/0x110 fs/ext4/ext4_jbd2.c:116
[...]
Call Trace:
ext4_write_inline_data_end+0x59a/0x730 fs/ext4/inline.c:795
generic_perform_write+0x279/0x3c0 mm/filemap.c:3344
ext4_buffered_write_iter+0x2e3/0x3d0 fs/ext4/file.c:270
ext4_file_write_iter+0x30a/0x11c0 fs/ext4/file.c:520
do_iter_readv_writev+0x339/0x3c0 fs/read_write.c:732
do_iter_write+0x107/0x430 fs/read_write.c:861
vfs_writev fs/read_write.c:934 [inline]
do_pwritev+0x1e5/0x380 fs/read_write.c:1031
[...]
==================================================================
Above issue may happen as follows:
cpu1 cpu2
__________________________|__________________________
do_pwritev
vfs_writev
do_iter_write
ext4_file_write_iter
ext4_buffered_write_iter
generic_perform_write
ext4_da_write_begin
vfs_fallocate
ext4_fallocate
ext4_convert_inline_data
ext4_convert_inline_data_nolock
ext4_destroy_inline_data_nolock
clear EXT4_STATE_MAY_INLINE_DATA
ext4_map_blocks
ext4_ext_map_blocks
ext4_mb_new_blocks
ext4_mb_regular_allocator
ext4_mb_good_group_nolock
ext4_mb_init_group
ext4_mb_init_cache
ext4_mb_generate_buddy --> error
ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)
ext4_restore_inline_data
set EXT4_STATE_MAY_INLINE_DATA
ext4_block_write_begin
ext4_da_write_end
ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)
ext4_write_inline_data_end
handle=NULL
ext4_journal_stop(handle)
__ext4_journal_stop
ext4_put_nojournal(handle)
ref_cnt = (unsigned long)handle
BUG_ON(ref_cnt == 0) ---> BUG_ON
The lock held by ext4_convert_inline_data is xattr_sem, but the lock
held by generic_perform_write is i_rwsem. Therefore, the two locks can
be concurrent.
To solve above issue, we add inode_lock() for ext4_convert_inline_data().
At the same time, move ext4_convert_inline_data() in front of
ext4_punch_hole(), remove similar handling from ext4_punch_hole().
Fixes: 0c8d414f16 ("ext4: let fallocate handle inline data correctly")
Cc: stable@vger.kernel.org
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220428134031.4153381-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Symlink's external data block is one kind of metadata block, and now
that almost all ext4 metadata block's page cache (e.g. directory blocks,
quota blocks...) belongs to bdev backing inode except the symlink. It
is essentially worked in data=journal mode like other regular file's
data block because probably in order to make it simple for generic VFS
code handling symlinks or some other historical reasons, but the logic
of creating external data block in ext4_symlink() is complicated. and it
also make things confused if user do not want to let the filesystem
worked in data=journal mode. This patch convert the final exceptional
case and make things clean, move the mapping of the symlink's external
data block to bdev like any other metadata block does.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20220424140936.1898920-3-yi.zhang@huawei.com
Current ext4_getblk() might sleep if some resources are not valid or
could be race with a concurrent extents modifing procedure. So we
cannot call ext4_getblk() and ext4_map_blocks() to get map blocks in
the atomic context in some fast path (e.g. the upcoming procedure of
getting symlink external block in the RCU context), even if the map
extents have already been check and cached.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20220424140936.1898920-2-yi.zhang@huawei.com
All but two of the callers already have a folio; pass a folio into
try_to_free_buffers(). This removes the last user of cancel_dirty_page()
so remove that wrapper function too.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Also convert it to return a bool since it's called from release_folio().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
The use of folios should be pushed deeper into ext4 from here.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
There are no more aop flags left, so remove the parameter.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
There are no more aop flags left, so remove the parameter.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Instead of setting AOP_FLAG_NOFS, use memalloc_nofs_save() and
memalloc_nofs_restore() to prevent GFP_FS allocations recursing
into the filesystem with a journal already started.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Instead of setting AOP_FLAG_NOFS, use memalloc_nofs_save() and
memalloc_nofs_restore() to prevent GFP_FS allocations recursing
into the filesystem with a journal already started.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Theodore Ts'o <tytso@mit.edu>
injection testing. Change ext4's fallocate to update consistently
drop set[ug]id bits when an fallocate operation might possibly change
the user-visible contents of a file. Also, improve handling of
potentially invalid values in the the s_overhead_cluster superblock
field to avoid ext4 returning a negative number of free blocks.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmJinf8ACgkQ8vlZVpUN
gaOHgQf+MKgUZgteYogLzoP3mF1kSycOGawk4wZ3QHOLz7AvsV2p9J8BWihbS/EK
dBydfXbTMvCUrjWmpqb5dHECRzxdfxOJ0SPJtibc8DZaJc9ImNFmgSp9kyJ3uRaN
cPGO6Lz2RXpdumVMPPLwzUJdVyrLi0K6I1NYSocxKgribePzd+xil8S9zRZj8Bpe
RaeH0EytcRj2CI5qs5mI/mOPBAMsZeczd3HInI3gyCgP2I4ZOfsADne3APx57mcI
IGKf77nvIwMHeKel3MGYfFPitEs5cZpHUhHplCMtgFsO8H0IR93tqnlaCvTM7VAZ
Slamgl7pfcXFcLZP+pm0QL/82ub7iw==
=FIds
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix some syzbot-detected bugs, as well as other bugs found by I/O
injection testing.
Change ext4's fallocate to consistently drop set[ug]id bits when an
fallocate operation might possibly change the user-visible contents of
a file.
Also, improve handling of potentially invalid values in the the
s_overhead_cluster superblock field to avoid ext4 returning a negative
number of free blocks"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
jbd2: fix a potential race while discarding reserved buffers after an abort
ext4: update the cached overhead value in the superblock
ext4: force overhead calculation if the s_overhead_cluster makes no sense
ext4: fix overhead calculation to account for the reserved gdt blocks
ext4, doc: fix incorrect h_reserved size
ext4: limit length to bitmap_maxbytes - blocksize in punch_hole
ext4: fix use-after-free in ext4_search_dir
ext4: fix bug_on in start_this_handle during umount filesystem
ext4: fix symlink file size not match to file content
ext4: fix fallocate to use file_modified to update permissions consistently
Since the initial introduction of (posix) fallocate back at the turn of
the century, it has been possible to use this syscall to change the
user-visible contents of files. This can happen by extending the file
size during a preallocation, or through any of the newer modes (punch,
zero, collapse, insert range). Because the call can be used to change
file contents, we should treat it like we do any other modification to a
file -- update the mtime, and drop set[ug]id privileges/capabilities.
The VFS function file_modified() does all this for us if pass it a
locked inode, so let's make fallocate drop permissions correctly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20220308185043.GA117678@magnolia
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
This should use the new folio_buffers() instead of page_has_buffers().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Primarily this series converts some of the address_space operations
to take a folio instead of a page.
->is_partially_uptodate() takes a folio instead of a page and changes the
type of the 'from' and 'count' arguments to make it obvious they're bytes.
->invalidatepage() becomes ->invalidate_folio() and has a similar type change.
->launder_page() becomes ->launder_folio()
->set_page_dirty() becomes ->dirty_folio() and adds the address_space as
an argument.
There are a couple of other misc changes up front that weren't worth
separating into their own pull request.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmI4hqMACgkQDpNsjXcp
gj7r7Af/fVJ7m8kKqjP/IayX3HiJRuIDQw+vM++BlRNXdjz+IyED6whdmFGxJeOY
BMyT+8ApOAz7ErS4G+7fAv4ScJK/aEgFUsnSeAiCp0PliiEJ5NNJzElp6sVmQ7H5
SX7+Ek444FZUGsQuy0qL7/ELpR3ditnD7x+5U2g0p5TeaHGUQn84crRyfR4xuhNG
EBD9D71BOb7OxUcOHe93pTkK51QsQ0aCrcIsB1tkK5KR0BAthn1HqF7ehL90Rvrr
omx5M7aDWGY4oj7IKrhlAs+55Ah2WaOzrZBp0FXNbr4UENDBKWKyUxErwa4xPkf6
Gm1iQG/CspOHnxN3YWsd5WjtlL3A+A==
=cOiq
-----END PGP SIGNATURE-----
Merge tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache
Pull filesystem folio updates from Matthew Wilcox:
"Primarily this series converts some of the address_space operations to
take a folio instead of a page.
Notably:
- a_ops->is_partially_uptodate() takes a folio instead of a page and
changes the type of the 'from' and 'count' arguments to make it
obvious they're bytes.
- a_ops->invalidatepage() becomes ->invalidate_folio() and has a
similar type change.
- a_ops->launder_page() becomes ->launder_folio()
- a_ops->set_page_dirty() becomes ->dirty_folio() and adds the
address_space as an argument.
There are a couple of other misc changes up front that weren't worth
separating into their own pull request"
* tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache: (53 commits)
fs: Remove aops ->set_page_dirty
fb_defio: Use noop_dirty_folio()
fs: Convert __set_page_dirty_no_writeback to noop_dirty_folio
fs: Convert __set_page_dirty_buffers to block_dirty_folio
nilfs: Convert nilfs_set_page_dirty() to nilfs_dirty_folio()
mm: Convert swap_set_page_dirty() to swap_dirty_folio()
ubifs: Convert ubifs_set_page_dirty to ubifs_dirty_folio
f2fs: Convert f2fs_set_node_page_dirty to f2fs_dirty_node_folio
f2fs: Convert f2fs_set_data_page_dirty to f2fs_dirty_data_folio
f2fs: Convert f2fs_set_meta_page_dirty to f2fs_dirty_meta_folio
afs: Convert afs_dir_set_page_dirty() to afs_dir_dirty_folio()
btrfs: Convert extent_range_redirty_for_io() to use folios
fs: Convert trivial uses of __set_page_dirty_nobuffers to filemap_dirty_folio
btrfs: Convert from set_page_dirty to dirty_folio
fscache: Convert fscache_set_page_dirty() to fscache_dirty_folio()
fs: Add aops->dirty_folio
fs: Remove aops->launder_page
orangefs: Convert launder_page to launder_folio
nfs: Convert from launder_page to launder_folio
fuse: Convert from launder_page to launder_folio
...
more bug fixes and clean ups in the ext4 fast_commit feature (most
notably, in the tracepoints). In the jbd2 layer, the t_handle_lock
spinlock has been removed, with the last place where it was actually
needed replaced with an atomic cmpxchg.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEOrBXt+eNlFyMVZH70292m8EYBPAFAmI5QPsACgkQ0292m8EY
BPD99Q//ZO7L0XUicNEsuxvtXDj4GBWg/R62JXcHsIetIRhCpM4+L2vS3kZVXCBh
Pd+QMYsfAhuXFK3yK5MfvAb+XJ2e0iVNaw9ke2ueAsrGidlKWOstbMWWqEa4Dcr2
age1DdrRB5hXIFxOg+Qz8bPMpP9XfxEiMqT2K7PgB+R/Z2chBbwPJ/G1VmdOMNGe
FzxZgvXFY5EIJgjqj09ioD5pUSlAj5sgI4y/Dcv4liW11kvgBxg7Mm8ZouoPRHa3
gZF5mj/40izhD8gYPmZJtHFFYuqBBLsrmJnjUF2Y2yvZt5I14j4w/5OfcjuJqWn6
t2mlnk8/o6ZHzyuUV0/8/x35rZBlwqMq9ep6L9pN07XVB0/xOMG7a59pWOElhFGp
sG/ELhP251ZE+glWC9/X1VjnhM+agduiWAUY0wF0X62LM3sw6sVO3q6hsI1EKunN
O5VlvzPXNTZn9bcKzXzpvbxP9vF6s4exf32rMxd1rfSptE6myavGwss7MlB1HM7v
xiM/A4AZT/qlUH9eOJxF1aGcswpxnFwTwHKZqBVW32iyG9mbqRT2lKajx4WstowU
pdI4X7YfF7GhI5tMFR5S4Fa9FiOivO4EEc6z/db753kVuxSjwtyDd8ip56ZuJUhU
LqpwZO2bh+UhR0vRO0pQH/ZqCzCfCaJTGtBwAvJUwo3g/zRTmoc=
=naSC
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Fix some bugs in converting ext4 to use the new mount API, as well as
more bug fixes and clean ups in the ext4 fast_commit feature (most
notably, in the tracepoints).
In the jbd2 layer, the t_handle_lock spinlock has been removed, with
the last place where it was actually needed replaced with an atomic
cmpxchg"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (35 commits)
ext4: fix kernel doc warnings
ext4: fix remaining two trace events to use same printk convention
ext4: add commit tid info in ext4_fc_commit_start/stop trace events
ext4: add commit_tid info in jbd debug log
ext4: add transaction tid info in fc_track events
ext4: add new trace event in ext4_fc_cleanup
ext4: return early for non-eligible fast_commit track events
ext4: do not call FC trace event in ext4_fc_commit() if FS does not support FC
ext4: convert ext4_fc_track_dentry type events to use event class
ext4: fix ext4_fc_stats trace point
ext4: remove unused enum EXT4_FC_COMMIT_FAILED
ext4: warn when dirtying page w/o buffers in data=journal mode
doc: fixed a typo in ext4 documentation
ext4: make mb_optimize_scan performance mount option work with extents
ext4: make mb_optimize_scan option work with set/unset mount cmd
ext4: don't BUG if someone dirty pages without asking ext4 first
ext4: remove redundant assignment to variable split_flag1
ext4: fix underflow in ext4_max_bitmap_size()
ext4: fix ext4_mb_clear_bb() kernel-doc comment
ext4: fix fs corruption when tring to remove a non-empty directory with IO error
...
This is a mechanical change.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Convert all callers; mostly this is just changing the aops to point
at it, but a few implementations need a little more work.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
These filesystems use __set_page_dirty_nobuffers() either directly or
with a very thin wrapper; convert them en masse.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Extensive changes, but fairly mechanical.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
We used to have to use noop_invalidatepage() to prevent
block_invalidatepage() from being called, but that behaviour is now gone.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Remove special-casing of a NULL invalidatepage, since there is no
more block_invalidatepage.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Instead of calling ->invalidatepage directly, use folio_invalidate().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Recently I've got a report of BUG_ON trigerring during transaction
commit in ext4_journalled_writepage_callback() because we've spotted a
dirty page without buffers. Add WARN_ON_ONCE to
ext4_journalled_set_page_dirty() to catch the problematic condition
earlier where we have better chance of understanding which code path is
creating dirty data without preparing the page properly. Also update the
comment with current information when we are at it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220310101832.5645-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
[un]pin_user_pages_remote is dirtying pages without properly warning
the file system in advance. A related race was noted by Jan Kara in
2018[1]; however, more recently instead of it being a very hard-to-hit
race, it could be reliably triggered by process_vm_writev(2) which was
discovered by Syzbot[2].
This is technically a bug in mm/gup.c, but arguably ext4 is fragile in
that if some other kernel subsystem dirty pages without properly
notifying the file system using page_mkwrite(), ext4 will BUG, while
other file systems will not BUG (although data will still be lost).
So instead of crashing with a BUG, issue a warning (since there may be
potential data loss) and just mark the page as clean to avoid
unprivileged denial of service attacks until the problem can be
properly fixed. More discussion and background can be found in the
thread starting at [2].
[1] https://lore.kernel.org/linux-mm/20180103100430.GE4911@quack2.suse.cz
[2] https://lore.kernel.org/r/Yg0m6IjcNmfaSokM@google.com
Reported-by: syzbot+d59332e2db681cf18f0318a06e994ebbb529a8db@syzkaller.appspotmail.com
Reported-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/YiDS9wVfq4mM2jGK@mit.edu
Encrypted files traditionally haven't supported DIO, due to the need to
encrypt/decrypt the data. However, when the encryption is implemented
using inline encryption (blk-crypto) instead of the traditional
filesystem-layer encryption, it is straightforward to support DIO.
Therefore, make ext4 support DIO on files that are using inline
encryption. Since ext4 uses iomap for DIO, and fscrypt support was
already added to iomap DIO, this just requires two small changes:
- Let DIO proceed when supported, by checking fscrypt_dio_supported()
instead of assuming that encrypted files never support DIO.
- In ext4_iomap_begin(), use fscrypt_limit_io_blocks() to limit the
length of the mapping in the rare case where a DUN discontiguity
occurs in the middle of an extent. The iomap DIO implementation
requires this, since it assumes that it can submit a bio covering (up
to) the whole mapping, without checking fscrypt constraints itself.
Co-developed-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Link: https://lore.kernel.org/r/20220128233940.79464-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
fix regression introduced as part of moving to the new mount API.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmH7/AUACgkQ8vlZVpUN
gaOsuQf/TFH8QNBSeEkT5ybnrS51KGTv88mdUVMcsmSMhmAFxiGJLFtMLFu9LG7b
bJYCg+Q9Rieb1qqqtGNyLe4p3ewShSzBFu8p7hzKMfu0EEcrJwTYVywSX0oYhMMm
9o+V6CPcGYVZtImihdsmDvgMRRkzoevHQFx+OLhkaq4Qd9ZEdohchYIhRFNXwd+w
CJiL0TFAnrb4QfWgtq3HyY7aoQumf8YI15C+RTfykzCBhZRFRKXjVXPdIjfGe4O2
Fpjr4gSsgYK0Er0LLJvESeFFVpFz+NV7q9W/Vj5ahaKJDpiVGzL/OPZsnafzHPPy
CSa+iP3ZLcTb+KRTOZ1mgjvS34Cmyw==
=DpdZ
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Various bug fixes for ext4 fast commit and inline data handling.
Also fix regression introduced as part of moving to the new mount API"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
fs/ext4: fix comments mentioning i_mutex
ext4: fix incorrect type issue during replay_del_range
jbd2: fix kernel-doc descriptions for jbd2_journal_shrink_{scan,count}()
ext4: fix potential NULL pointer dereference in ext4_fill_super()
jbd2: refactor wait logic for transaction updates into a common function
jbd2: cleanup unused functions declarations from jbd2.h
ext4: fix error handling in ext4_fc_record_modified_inode()
ext4: remove redundant max inline_size check in ext4_da_write_inline_data_begin()
ext4: fix error handling in ext4_restore_inline_data()
ext4: fast commit may miss file actions
ext4: fast commit may not fallback for ineligible commit
ext4: modify the logic of ext4_mb_new_blocks_simple
ext4: prevent used blocks from being allocated during fast commit replay
For the follow scenario:
1. jbd start commit transaction n
2. task A get new handle for transaction n+1
3. task A do some ineligible actions and mark FC_INELIGIBLE
4. jbd complete transaction n and clean FC_INELIGIBLE
5. task A call fsync
In this case fast commit will not fallback to full commit and
transaction n+1 also not handled by jbd.
Make ext4_fc_mark_ineligible() also record transaction tid for
latest ineligible case, when call ext4_fc_cleanup() check
current transaction tid, if small than latest ineligible tid
do not clear the EXT4_MF_FC_INELIGIBLE.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Ritesh Harjani <riteshh@linux.ibm.com>
Suggested-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Link: https://lore.kernel.org/r/20220117093655.35160-2-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
- Simplify the dax_operations API
- Eliminate bdev_dax_pgoff() in favor of the filesystem maintaining
and applying a partition offset to all its DAX iomap operations.
- Remove wrappers and device-mapper stacked callbacks for
->copy_from_iter() and ->copy_to_iter() in favor of moving
block_device relative offset responsibility to the
dax_direct_access() caller.
- Remove the need for an @bdev in filesystem-DAX infrastructure
- Remove unused uio helpers copy_from_iter_flushcache() and
copy_mc_to_iter() as only the non-check_copy_size() versions are
used for DAX.
- Prepare XFS for the pending (next merge window) DAX+reflink support
- Remove deprecated DEV_DAX_PMEM_COMPAT support
- Cleanup a straggling misuse of the GUID api
Tags offered after the branch was cut:
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/Ydb/3P+8nvjCjYfO@redhat.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYd3dTAAKCRDfioYZHlFs
Z//UAP9zetoTE+O7zJG7CXja4jSopSadbdbh6QKSXaqfKBPvQQD+N4US3wA2bGv8
f/qCY62j2Hj3hUTGHs9RvTyw3JsSYAA=
=QvDs
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull dax and libnvdimm updates from Dan Williams:
"The bulk of this is a rework of the dax_operations API after
discovering the obstacles it posed to the work-in-progress DAX+reflink
support for XFS and other copy-on-write filesystem mechanics.
Primarily the need to plumb a block_device through the API to handle
partition offsets was a sticking point and Christoph untangled that
dependency in addition to other cleanups to make landing the
DAX+reflink support easier.
The DAX_PMEM_COMPAT option has been around for 4 years and not only
are distributions shipping userspace that understand the current
configuration API, but some are not even bothering to turn this option
on anymore, so it seems a good time to remove it per the deprecation
schedule. Recall that this was added after the device-dax subsystem
moved from /sys/class/dax to /sys/bus/dax for its sysfs organization.
All recent functionality depends on /sys/bus/dax.
Some other miscellaneous cleanups and reflink prep patches are
included as well.
Summary:
- Simplify the dax_operations API:
- Eliminate bdev_dax_pgoff() in favor of the filesystem
maintaining and applying a partition offset to all its DAX iomap
operations.
- Remove wrappers and device-mapper stacked callbacks for
->copy_from_iter() and ->copy_to_iter() in favor of moving
block_device relative offset responsibility to the
dax_direct_access() caller.
- Remove the need for an @bdev in filesystem-DAX infrastructure
- Remove unused uio helpers copy_from_iter_flushcache() and
copy_mc_to_iter() as only the non-check_copy_size() versions are
used for DAX.
- Prepare XFS for the pending (next merge window) DAX+reflink support
- Remove deprecated DEV_DAX_PMEM_COMPAT support
- Cleanup a straggling misuse of the GUID api"
* tag 'libnvdimm-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (38 commits)
iomap: Fix error handling in iomap_zero_iter()
ACPI: NFIT: Import GUID before use
dax: remove the copy_from_iter and copy_to_iter methods
dax: remove the DAXDEV_F_SYNC flag
dax: simplify dax_synchronous and set_dax_synchronous
uio: remove copy_from_iter_flushcache() and copy_mc_to_iter()
iomap: turn the byte variable in iomap_zero_iter into a ssize_t
memremap: remove support for external pgmap refcounts
fsdax: don't require CONFIG_BLOCK
iomap: build the block based code conditionally
dax: fix up some of the block device related ifdefs
fsdax: shift partition offset handling into the file systems
dax: return the partition offset from fs_dax_get_by_bdev
iomap: add a IOMAP_DAX flag
xfs: pass the mapping flags to xfs_bmbt_to_iomap
xfs: use xfs_direct_write_iomap_ops for DAX zeroing
xfs: move dax device handling into xfs_{alloc,free}_buftarg
ext4: cleanup the dax handling in ext4_fill_super
ext2: cleanup the dax handling in ext2_fill_super
fsdax: decouple zeroing from the iomap buffered I/O code
...
The command "make clang-analyzer" detects dead stores in
mpage_process_page() function.
Do not reset io_end_size to 0 in the current paths, as the function
exits on those paths without further using io_end_size.
Signed-off-by: Nghia Le <nghialm78@gmail.com>
Link: https://lore.kernel.org/r/20211025221803.3326-1-nghialm78@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Our syzkaller report an use-after-free issue that accessing the freed
buffer_head on the writeback page in __ext4_journalled_writepage(). The
problem is that if there was a truncate racing with the data=journalled
writeback procedure, the writeback length could become zero and
bget_one() refuse to get buffer_head's refcount, then the truncate
procedure release buffer once we drop page lock, finally, the last
ext4_walk_page_buffers() trigger the use-after-free problem.
sync truncate
ext4_sync_file()
file_write_and_wait_range()
ext4_setattr(0)
inode->i_size = 0
ext4_writepage()
len = 0
__ext4_journalled_writepage()
page_bufs = page_buffers(page)
ext4_walk_page_buffers(bget_one) <- does not get refcount
do_invalidatepage()
free_buffer_head()
ext4_walk_page_buffers(page_bufs) <- trigger use-after-free
After commit bdf96838ae ("ext4: fix race between truncate and
__ext4_journalled_writepage()"), we have already handled the racing
case, so the bget_one() and bput_one() are not needed. So this patch
simply remove these hunk, and recheck the i_size to make it safe.
Fixes: bdf96838ae ("ext4: fix race between truncate and __ext4_journalled_writepage()")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211225090937.712867-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
It is not guaranteed that __ext4_get_inode_loc will definitely set
err_blk pointer when it returns EIO. To avoid using uninitialized
variables, let's first set err_blk to 0.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211201163421.2631661-1-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
If use FALLOC_FL_KEEP_SIZE to alloc unwritten range at bottom, the
inode->i_size will not include the unwritten range. When call
ftruncate with fast commit enabled, it will miss to track the
unwritten range.
Change to trace the full range during ftruncate.
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211223032337.5198-3-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
when call falloc with FALLOC_FL_ZERO_RANGE, to set an range to unwritten,
which has been already initialized. If the range is align to blocksize,
fast commit will not track range for this change.
Also track range for unwritten range in ext4_map_blocks().
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211221022839.374606-1-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
This patch drops all calls to ext4_fc_start_update() and
ext4_fc_stop_update(). To ensure that there are no ongoing journal
updates during fast commit, we also make jbd2_fc_begin_commit() lock
journal for updates. This way we don't have to maintain two different
transaction start stop APIs for fast commit and full commit. This
patch doesn't remove the functions altogether since in future we want
to have inode level locking for fast commits.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211223202140.2061101-2-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove the last user of ->bdev in dax.c by requiring the file system to
pass in an address that already includes the DAX offset. As part of the
only set ->bdev or ->daxdev when actually required in the ->iomap_begin
methods.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> [erofs]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-27-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add a flag so that the file system can easily detect DAX operations
based just on the iomap operation requested instead of looking at
inode state using IS_DAX. This will be needed to apply the to be
added partition offset only for operations that actually use DAX,
but not things like fiemap that are based on the block device.
In the long run it should also allow turning the bdev, dax_dev
and inline_data into a union.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-25-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Unshare the DAX and iomap buffered I/O page zeroing code. This code
previously did a IS_DAX check deep inside the iomap code, which in
fact was the only DAX check in the code. Instead move these checks
into the callers. Most callers already have DAX special casing anyway
and XFS will need it for reflink support as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-19-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In ext4_get_inode_loc(), we may skip IO and get an zero && uptodate
inode buffer when the inode monopolize an inode block for performance
reason. For most cases, ext4_mark_iloc_dirty() will fill the inode
buffer to make it fine, but we could miss this call if something bad
happened. Finally, __ext4_get_inode_loc_noinmem() may probably get an
empty inode buffer and trigger ext4 error.
For example, if we remove a nonexistent xattr on inode A,
ext4_xattr_set_handle() will return ENODATA before invoking
ext4_mark_iloc_dirty(), it will left an uptodate but zero buffer. We
will get checksum error message in ext4_iget() when getting inode again.
EXT4-fs error (device sda): ext4_lookup:1784: inode #131074: comm cat: iget: checksum invalid
Even worse, if we allocate another inode B at the same inode block, it
will corrupt the inode A on disk when write back inode B.
So this patch initialize the inode buffer by filling the in-mem inode
contents if we skip read I/O, ensure that the buffer is really uptodate.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210901020955.1657340-4-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In preparation for calling ext4_fill_raw_inode() in
__ext4_get_inode_loc(), move three related functions before
__ext4_get_inode_loc(), no logical change.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210901020955.1657340-3-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_fill_raw_inode() from ext4_do_update_inode(), which is
use to fill the in-mem inode contents into the inode table buffer, in
preparation for initializing the exclusive inode buffer without reading
the block in __ext4_get_inode_loc().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210901020955.1657340-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This reverts commit 948ca5f30e.
Two crash reports from users running variations on 5.15-rc4 kernels
suggest that it is premature to enforce the state assertion in the
original commit. Both crashes were triggered by BUG calls in that
code, indicating that under some rare circumstance the buffer head
state did not match a delayed allocated block at the time the
block was written out. No reproducer is available. Resolving this
problem will require more time than remains in the current release
cycle, so reverting the original patch for the time being is necessary
to avoid any instability it may cause.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20211012171901.5352-1-enwlinux@gmail.com
Fixes: 948ca5f30e ("ext4: enforce buffer head state assertion in ext4_da_map_blocks")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
allocation. Also fix error handling code paths in ext4_dx_readdir()
and ext4_fill_super(). Finally, avoid a grabbing a journal head in
the delayed allocation write in the common cases where we are
overwriting an pre-existing block or appending to an inode.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmFZ2SsACgkQ8vlZVpUN
gaN6DAgAkIeisL1EfQT0VwshEs8y7N6IoX8dydLSRLpNf5oWiJOv2CTY9Qpi6X/C
qNfuLsbJ2NXChvhIAM2hD82hvX21rYc6iqPxgho02VF4eYIP7NzLjwTFKnKbHPB5
TiF498nJTnkcmSrJUEXmSAEdLoCwa5THH9+9HVHXZrkLXPULBtOOJ85mDAcIzVhV
Zqb7yfbpWl0gnF0S0YjNATPtbhcC9EiC4MOVYVesRlgT9B3+k5q4fmVU0euTU9OH
F2H6TNG+Mg/19gTnDP5acB9+eXHvYEqMpe+CaDifR9iFE9PTG/Edhxr6z9roXhHr
kBvEVHSFH+YTEJXghnpS9YDd9Lwc9w==
=WKzd
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a number of ext4 bugs in fast_commit, inline data, and delayed
allocation.
Also fix error handling code paths in ext4_dx_readdir() and
ext4_fill_super().
Finally, avoid a grabbing a journal head in the delayed allocation
write in the common cases where we are overwriting a pre-existing
block or appending to an inode"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: recheck buffer uptodate bit under buffer lock
ext4: fix potential infinite loop in ext4_dx_readdir()
ext4: flush s_error_work before journal destroy in ext4_fill_super
ext4: fix loff_t overflow in ext4_max_bitmap_size()
ext4: fix reserved space counter leakage
ext4: limit the number of blocks in one ADD_RANGE TLV
ext4: enforce buffer head state assertion in ext4_da_map_blocks
ext4: remove extent cache entries when truncating inline data
ext4: drop unnecessary journal handle in delalloc write
ext4: factor out write end code of inline file
ext4: correct the error path of ext4_write_inline_data_end()
ext4: check and update i_disksize properly
ext4: add error checking to ext4_ext_replay_set_iblocks()
Commit 8e33fadf94 ("ext4: remove an unnecessary if statement in
__ext4_get_inode_loc()") forget to recheck buffer's uptodate bit again
under buffer lock, which may overwrite the buffer if someone else have
already brought it uptodate and changed it.
Fixes: 8e33fadf94 ("ext4: remove an unnecessary if statement in __ext4_get_inode_loc()")
Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210910080316.70421-1-yi.zhang@huawei.com
When ext4_insert_delayed block receives and recovers from an error from
ext4_es_insert_delayed_block(), e.g., ENOMEM, it does not release the
space it has reserved for that block insertion as it should. One effect
of this bug is that s_dirtyclusters_counter is not decremented and
remains incorrectly elevated until the file system has been unmounted.
This can result in premature ENOSPC returns and apparent loss of free
space.
Another effect of this bug is that
/sys/fs/ext4/<dev>/delayed_allocation_blocks can remain non-zero even
after syncfs has been executed on the filesystem.
Besides, add check for s_dirtyclusters_counter when inode is going to be
evicted and freed. s_dirtyclusters_counter can still keep non-zero until
inode is written back in .evict_inode(), and thus the check is delayed
to .destroy_inode().
Fixes: 51865fda28 ("ext4: let ext4 maintain extent status tree")
Cc: stable@kernel.org
Suggested-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210823061358.84473-1-jefflexu@linux.alibaba.com
Remove the code that re-initializes a buffer head with an invalid block
number and BH_New and BH_Delay bits when a matching delayed and
unwritten block has been found in the extent status cache. Replace it
with assertions that verify the buffer head already has this state
correctly set. The current code masked an inline data truncation bug
that left stale entries in the extent status cache. With this change,
generic/130 can be used to reproduce and detect that bug.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210819144927.25163-3-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix a bug in how we update i_disksize, and the error path in
inline_data_end. Finally, drop an unnecessary creation of a journal
handle which was only needed for inline data, which can give us a
large performance gain in delayed allocation writes.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After we factor out the inline data write procedure from
ext4_da_write_end(), we don't need to start journal handle for the cases
of both buffer overwrite and append-write. If we need to update
i_disksize, mark_inode_dirty() do start handle and update inode buffer.
So we could just remove all the journal handle codes in the delalloc
write procedure.
After this patch, we could get a lot of performance improvement. Below
is the Unixbench comparison data test on my machine with 'Intel Xeon
Gold 5120' CPU and nvme SSD backend.
Test cmd:
./Run -c 56 -i 3 fstime fsbuffer fsdisk
Before this patch:
System Benchmarks Partial Index BASELINE RESULT INDEX
File Copy 1024 bufsize 2000 maxblocks 3960.0 422965.0 1068.1
File Copy 256 bufsize 500 maxblocks 1655.0 105077.0 634.9
File Copy 4096 bufsize 8000 maxblocks 5800.0 1429092.0 2464.0
======
System Benchmarks Index Score (Partial Only) 1186.6
After this patch:
System Benchmarks Partial Index BASELINE RESULT INDEX
File Copy 1024 bufsize 2000 maxblocks 3960.0 732716.0 1850.3
File Copy 256 bufsize 500 maxblocks 1655.0 184940.0 1117.5
File Copy 4096 bufsize 8000 maxblocks 5800.0 2427152.0 4184.7
======
System Benchmarks Index Score (Partial Only) 2053.0
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210716122024.1105856-5-yi.zhang@huawei.com
Now that the inline_data file write end procedure are falled into the
common write end functions, it is not clear. Factor them out and do
some cleanup. This patch also drop ext4_da_write_inline_data_end()
and switch to use ext4_write_inline_data_end() instead because we also
need to do the same error processing if we failed to write data into
inline entry.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210716122024.1105856-4-yi.zhang@huawei.com
Current error path of ext4_write_inline_data_end() is not correct.
Firstly, it should pass out the error value if ext4_get_inode_loc()
return fail, or else it could trigger infinite loop if we inject error
here. And then it's better to add inode to orphan list if it return fail
in ext4_journal_stop(), otherwise we could not restore inline xattr
entry after power failure. Finally, we need to reset the 'ret' value if
ext4_write_inline_data_end() return success in ext4_write_end() and
ext4_journalled_write_end(), otherwise we could not get the error return
value of ext4_journal_stop().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210716122024.1105856-3-yi.zhang@huawei.com
After commit 3da40c7b08 ("ext4: only call ext4_truncate when size <=
isize"), i_disksize could always be updated to i_size in ext4_setattr(),
and we could sure that i_disksize <= i_size since holding inode lock and
if i_disksize < i_size there are delalloc writes pending in the range
upto i_size. If the end of the current write is <= i_size, there's no
need to touch i_disksize since writeback will push i_disksize upto
i_size eventually. So we can switch to check i_size instead of
i_disksize in ext4_da_write_end() when write to the end of the file.
we also could remove ext4_mark_inode_dirty() together because we defer
inode dirtying to generic_write_end() or ext4_da_write_inline_data_end().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210716122024.1105856-2-yi.zhang@huawei.com
orphan_file feature, which eliminates bottlenecks when doing a large
number of parallel truncates and file deletions, and move the discard
operation out of the jbd2 commit thread when using the discard mount
option, to better support devices with slow discard operations.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmEw5gEACgkQ8vlZVpUN
gaMatgf9GKc2H3JUDGJVXrOE1EZWXzyDI+Tv6zt0iTr05zi1ahjGccAbmJXiAwxU
Zy5TGr53CpPcGUG+sO4NpVzcH8q7cQeG0pVx9OnzJUdVfmv+htoNE0aAqUY5L3vg
AxV4KPGgxPofRQa3QRE2LDFHIkNs7c0ncprdaAtxNztd09iFo7bIayt614mARK++
HIO7VOGrH5Wya8SSoqYHmlO0g5viy3ypP6CpysIQw0JifSlHYkmYBUJ0/hwPV/Xl
WfzmwQ9p43C9EXVmIN4++l674TDzkSn9ebITXOgkq4C8KjnFgyhKQIj5QVj81MvH
dac5jxsuLTXTLYnRpAQ/duV4jRd+Fw==
=+NN7
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"In addition to some ext4 bug fixes and cleanups, this cycle we add the
orphan_file feature, which eliminates bottlenecks when doing a large
number of parallel truncates and file deletions, and move the discard
operation out of the jbd2 commit thread when using the discard mount
option, to better support devices with slow discard operations"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
ext4: make the updating inode data procedure atomic
ext4: remove an unnecessary if statement in __ext4_get_inode_loc()
ext4: move inode eio simulation behind io completeion
ext4: Improve scalability of ext4 orphan file handling
ext4: Orphan file documentation
ext4: Speedup ext4 orphan inode handling
ext4: Move orphan inode handling into a separate file
ext4: Support for checksumming from journal triggers
ext4: fix race writing to an inline_data file while its xattrs are changing
jbd2: add sparse annotations for add_transaction_credits()
ext4: fix sparse warnings
ext4: Make sure quota files are not grabbed accidentally
ext4: fix e2fsprogs checksum failure for mounted filesystem
ext4: if zeroout fails fall back to splitting the extent node
ext4: reduce arguments of ext4_fc_add_dentry_tlv
ext4: flush background discard kwork when retry allocation
ext4: get discard out of jbd2 commit kthread contex
ext4: remove the repeated comment of ext4_trim_all_free
ext4: add new helper interface ext4_try_to_trim_range()
ext4: remove the 'group' parameter of ext4_trim_extent
...
Now that ext4_do_update_inode() return error before filling the whole
inode data if we fail to set inode blocks in ext4_inode_blocks_set().
This error should never happen in theory since sb->s_maxbytes should not
have allowed this, we have already init sb->s_maxbytes according to this
feature in ext4_fill_super(). So even through that could only happen due
to the filesystem corruption, we'd better to return after we finish
updating the inode because it may left an uninitialized buffer and we
could read this buffer later in "errors=continue" mode.
This patch make the updating inode data procedure atomic, call
EXT4_ERROR_INODE() after we dropping i_raw_lock after something bad
happened, make sure that the inode is integrated, and also drop a BUG_ON
and do some small cleanups.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210826130412.3921207-4-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The "if (!buffer_uptodate(bh))" hunk covered almost the whole code after
getting buffer in __ext4_get_inode_loc() which seems unnecessary, remove
it and switch to check ext4_buffer_uptodate(), it simplify code and make
it more readable.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210826130412.3921207-3-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
No EIO simulation is required if the buffer is uptodate, so move the
simulation behind read bio completeion just like inode/block bitmap
simulation does.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210826130412.3921207-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ext4 orphan inode handling is a bottleneck for workloads which heavily
truncate / unlink small files since it contends on the global
s_orphan_mutex lock (and generally it's difficult to improve scalability
of the ondisk linked list of orphaned inodes).
This patch implements new way of handling orphan inodes. Instead of
linking orphaned inode into a linked list, we store it's inode number in
a new special file which we call "orphan file". Only if there's no more
space in the orphan file (too many inodes are currently orphaned) we
fall back to using old style linked list. Currently we protect
operations in the orphan file with a spinlock for simplicity but even in
this setting we can substantially reduce the length of the critical
section and thus speedup some workloads. In the next patch we improve
this by making orphan handling lockless.
Note that the change is backwards compatible when the filesystem is
clean - the existence of the orphan file is a compat feature, we set
another ro-compat feature indicating orphan file needs scanning for
orphaned inodes when mounting filesystem read-write. This ro-compat
feature gets cleared on unmount / remount read-only.
Some performance data from 80 CPU Xeon Server with 512 GB of RAM,
filesystem located on SSD, average of 5 runs:
stress-orphan (microbenchmark truncating files byte-by-byte from N
processes in parallel)
Threads Time Time
Vanilla Patched
1 1.057200 0.945600
2 1.680400 1.331800
4 2.547000 1.995000
8 7.049400 6.424200
16 14.827800 14.937600
32 40.948200 33.038200
64 87.787400 60.823600
128 206.504000 122.941400
So we can see significant wins all over the board.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210816095713.16537-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
JBD2 layer support triggers which are called when journaling layer moves
buffer to a certain state. We can use the frozen trigger, which gets
called when buffer data is frozen and about to be written out to the
journal, to compute block checksums for some buffer types (similarly as
does ocfs2). This avoids unnecessary repeated recomputation of the
checksum (at the cost of larger window where memory corruption won't be
caught by checksumming) and is even necessary when there are
unsynchronized updaters of the checksummed data.
So add superblock and journal trigger type arguments to
ext4_journal_get_write_access() and ext4_journal_get_create_access() so
that frozen triggers can be set accordingly. Also add inode argument to
ext4_walk_page_buffers() and all the callbacks used with that function
for the same purpose. This patch is mostly only a change of prototype of
the above mentioned functions and a few small helpers. Real checksumming
will come later.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210816095713.16537-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If ext4 filesystem is corrupted so that quota files are linked from
directory hirerarchy, bad things can happen. E.g. quota files can get
corrupted or deleted. Make sure we are not grabbing quota file inodes
when we expect normal inodes.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210812133122.26360-1-jack@suse.cz
Convert ext4 to use mapping->invalidate_lock instead of its private
EXT4_I(inode)->i_mmap_sem. This is mostly search-and-replace. By this
conversion we fix a long standing race between hole punching and read(2)
/ readahead(2) paths that can lead to stale page cache contents.
CC: <linux-ext4@vger.kernel.org>
CC: Ted Tso <tytso@mit.edu>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
ext4 in 5.14:
- Allow applications to poll on changes to /sys/fs/ext4/*/errors_count
- Add the ioctl EXT4_IOC_CHECKPOINT which allows the journal to be
checkpointed, truncated and discarded or zero'ed.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmDcjRgACgkQ8vlZVpUN
gaMAMQgAjRYUQ+tdJVZzInFwukudhgLyuCP9AdCx76fisaH22yNCakQ7M2XGz59i
/YbJerLaueYpHZzpA9p5+sSjVhMwILO3scBSJbOwdsbrFAsFLzcgQKQhGGqK2KvX
IAOEArC8/hm1wnVb7sfQYdBHlWyeJpI8hd/8WZPlYtySlRnP1TZCd+X7y7lmNs1H
QU1KECwstI2t8Lug0QeKx2B9PI9AWcCs0lTJ4LfcANZAh3HIJi9aUCk4SFDRkf3/
8AazvMqTHJD9yc+BNyZOro2ykDFCStkNqf0cDYTzvKrr66CHScPUtyI0oAEdspxN
+SNNARPGZgNOuR3ZRbGivtwgEB+GpQ==
=jSd4
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"In addition to bug fixes and cleanups, there are two new features for
ext4 in 5.14:
- Allow applications to poll on changes to
/sys/fs/ext4/*/errors_count
- Add the ioctl EXT4_IOC_CHECKPOINT which allows the journal to be
checkpointed, truncated and discarded or zero'ed"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (32 commits)
jbd2: export jbd2_journal_[un]register_shrinker()
ext4: notify sysfs on errors_count value change
fs: remove bdev_try_to_free_page callback
ext4: remove bdev_try_to_free_page() callback
jbd2: simplify journal_clean_one_cp_list()
jbd2,ext4: add a shrinker to release checkpointed buffers
jbd2: remove redundant buffer io error checks
jbd2: don't abort the journal when freeing buffers
jbd2: ensure abort the journal if detect IO error when writing original buffer back
jbd2: remove the out label in __jbd2_journal_remove_checkpoint()
ext4: no need to verify new add extent block
jbd2: clean up misleading comments for jbd2_fc_release_bufs
ext4: add check to prevent attempting to resize an fs with sparse_super2
ext4: consolidate checks for resize of bigalloc into ext4_resize_begin
ext4: remove duplicate definition of ext4_xattr_ibody_inline_set()
ext4: fsmap: fix the block/inode bitmap comment
ext4: fix comment for s_hash_unsigned
ext4: use local variable ei instead of EXT4_I() macro
ext4: fix avefreec in find_group_orlov
ext4: correct the cache_nr in tracepoint ext4_es_shrink_exit
...
Use __set_page_dirty_no_writeback() instead. This will set the dirty bit
on the page, which will be used to avoid calling set_page_dirty() in the
future. It will have no effect on actually writing the page back, as the
pages are not on any LRU lists.
[akpm@linux-foundation.org: export __set_page_dirty_no_writeback() to modules]
Link: https://lkml.kernel.org/r/20210615162342.1669332-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a flags argument to jbd2_journal_flush to enable discarding or
zero-filling the journal blocks while flushing the journal.
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Link: https://lore.kernel.org/r/20210518151327.130198-1-leah.rumancik@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
A code in iomap alloc may overflow block number when converting it to
byte offset. Luckily this is mostly harmless as we will just use more
expensive method of writing using unwritten extents even though we are
writing beyond i_size.
Cc: stable@kernel.org
Fixes: 378f32bab3 ("ext4: introduce direct I/O write using iomap infrastructure")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210412102333.2676-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The buffer uptodate state has been checked in function set_buffer_uptodate,
there is no need use buffer_uptodate before calling set_buffer_uptodate and
delete it.
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Yang Guo <guoyang2@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/1617260610-29770-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If set_large_file = 1 and errors occur in ext4_handle_dirty_metadata(),
the error code will be overridden, go to out_brelse to avoid this
situation.
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Link: https://lore.kernel.org/r/20210312065051.36314-1-luoshijie1@huawei.com
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYCegywAKCRCRxhvAZXjc
ouJ6AQDlf+7jCQlQdeKKoN9QDFfMzG1ooemat36EpRRTONaGuAD8D9A4sUsG4+5f
4IU5Lj9oY4DEmF8HenbWK2ZHsesL2Qg=
=yPaw
-----END PGP SIGNATURE-----
Merge tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdfhttps://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
1d7b902e28
In order to support idmapped mounts, filesystems need to be changed
and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
patches to convert individual filesystem are not very large or
complicated overall as can be seen from the included fat, ext4, and
xfs ports. Patches for other filesystems are actively worked on and
will be sent out separately. The xfstestsuite can be used to verify
that port has been done correctly.
The mount_setattr() syscall is motivated independent of the idmapped
mounts patches and it's been around since July 2019. One of the most
valuable features of the new mount api is the ability to perform
mounts based on file descriptors only.
Together with the lookup restrictions available in the openat2()
RESOLVE_* flag namespace which we added in v5.6 this is the first time
we are close to hardened and race-free (e.g. symlinks) mounting and
path resolution.
While userspace has started porting to the new mount api to mount
proper filesystems and create new bind-mounts it is currently not
possible to change mount options of an already existing bind mount in
the new mount api since the mount_setattr() syscall is missing.
With the addition of the mount_setattr() syscall we remove this last
restriction and userspace can now fully port to the new mount api,
covering every use-case the old mount api could. We also add the
crucial ability to recursively change mount options for a whole mount
tree, both removing and adding mount options at the same time. This
syscall has been requested multiple times by various people and
projects.
There is a simple tool available at
https://github.com/brauner/mount-idmapped
that allows to create idmapped mounts so people can play with this
patch series. I'll add support for the regular mount binary should you
decide to pull this in the following weeks:
Here's an example to a simple idmapped mount of another user's home
directory:
u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt
u1001@f2-vm:/$ ls -al /home/ubuntu/
total 28
drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
drwxr-xr-x 4 root root 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ ls -al /mnt/
total 28
drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 .
drwxr-xr-x 29 root root 4096 Oct 28 22:01 ..
-rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile
-rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ touch /mnt/my-file
u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file
u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file
u1001@f2-vm:/$ ls -al /mnt/my-file
-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file
u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file
u1001@f2-vm:/$ getfacl /mnt/my-file
getfacl: Removing leading '/' from absolute path names
# file: mnt/my-file
# owner: u1001
# group: u1001
user::rw-
user:u1001:rwx
group::rw-
mask::rwx
other::r--
u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
getfacl: Removing leading '/' from absolute path names
# file: home/ubuntu/my-file
# owner: ubuntu
# group: ubuntu
user::rw-
user:ubuntu:rwx
group::rw-
mask::rwx
other::r--"
* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
xfs: support idmapped mounts
ext4: support idmapped mounts
fat: handle idmapped mounts
tests: add mount_setattr() selftests
fs: introduce MOUNT_ATTR_IDMAP
fs: add mount_setattr()
fs: add attr_flags_to_mnt_flags helper
fs: split out functions to hold writers
namespace: only take read lock in do_reconfigure_mnt()
mount: make {lock,unlock}_mount_hash() static
namespace: take lock_mount_hash() directly when changing flags
nfs: do not export idmapped mounts
overlayfs: do not mount on top of idmapped mounts
ecryptfs: do not mount on top of idmapped mounts
ima: handle idmapped mounts
apparmor: handle idmapped mounts
fs: make helpers idmap mount aware
exec: handle idmapped mounts
would_dump: handle idmapped mounts
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmAzoWUACgkQnJ2qBz9k
QNnFgQgAlng0JOzeCQvLpwweqFl0FCxYbOsZXC1xDyvfX3TiA6A6oiOR4tx3uhQN
cOQmJXaiMn4oCXjD1j6WZwGfy23yx0XchaoFK9jy2IqodaB/zUjkiWYYqt0G3XIX
ud35mxjLAGS12BCD0c+vHy2RMsUFl5ep+5aBHRHZJJhCcYbl7e5ctXZ3xB1Q0mgI
r639gD8JhH3ICdu9W0NaMvqOrVhJFNmhSGATKL/N96+oKub2x2ycYE4L2OXegxy3
mnFf26LjA8jt7K+KfHloTvkC6D4HVnnvKFvKiIbGKafiWhAE7q57ZO6BPCMajGue
3UHIhWGmwKXRU72+nW6N+089GbcO/g==
=1e+z
-----END PGP SIGNATURE-----
Merge tag 'lazytime_for_v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull lazytime updates from Jan Kara:
"Cleanups of the lazytime handling in the writeback code making rules
for calling ->dirty_inode() filesystem handlers saner"
* tag 'lazytime_for_v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext4: simplify i_state checks in __ext4_update_other_inode_time()
gfs2: don't worry about I_DIRTY_TIME in gfs2_fsync()
fs: improve comments for writeback_single_inode()
fs: drop redundant check from __writeback_single_inode()
fs: clean up __mark_inode_dirty() a bit
fs: pass only I_DIRTY_INODE flags to ->dirty_inode
fs: don't call ->dirty_inode for lazytime timestamp updates
fat: only specify I_DIRTY_TIME when needed in fat_update_time()
fs: only specify I_DIRTY_TIME when needed in generic_update_time()
fs: correctly document the inode dirty flags
Enable idmapped mounts for ext4. All dedicated helpers we need for this
exist. So this basically just means we're passing down the
user_namespace argument from the VFS methods to the relevant helpers.
Let's create simple example where we idmap an ext4 filesystem:
root@f2-vm:~# truncate -s 5G ext4.img
root@f2-vm:~# mkfs.ext4 ./ext4.img
mke2fs 1.45.5 (07-Jan-2020)
Discarding device blocks: done
Creating filesystem with 1310720 4k blocks and 327680 inodes
Filesystem UUID: 3fd91794-c6ca-4b0f-9964-289a000919cf
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736
Allocating group tables: done
Writing inode tables: done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: done
root@f2-vm:~# losetup -f --show ./ext4.img
/dev/loop0
root@f2-vm:~# mount /dev/loop0 /mnt
root@f2-vm:~# ls -al /mnt/
total 24
drwxr-xr-x 3 root root 4096 Oct 28 13:34 .
drwxr-xr-x 30 root root 4096 Oct 28 13:22 ..
drwx------ 2 root root 16384 Oct 28 13:34 lost+found
# Let's create an idmapped mount at /idmapped1 where we map uid and gid
# 0 to uid and gid 1000
root@f2-vm:/# ./mount-idmapped --map-mount b:0:1000:1 /mnt/ /idmapped1/
root@f2-vm:/# ls -al /idmapped1/
total 24
drwxr-xr-x 3 ubuntu ubuntu 4096 Oct 28 13:34 .
drwxr-xr-x 30 root root 4096 Oct 28 13:22 ..
drwx------ 2 ubuntu ubuntu 16384 Oct 28 13:34 lost+found
# Let's create an idmapped mount at /idmapped2 where we map uid and gid
# 0 to uid and gid 2000
root@f2-vm:/# ./mount-idmapped --map-mount b:0:2000:1 /mnt/ /idmapped2/
root@f2-vm:/# ls -al /idmapped2/
total 24
drwxr-xr-x 3 2000 2000 4096 Oct 28 13:34 .
drwxr-xr-x 31 root root 4096 Oct 28 13:39 ..
drwx------ 2 2000 2000 16384 Oct 28 13:34 lost+found
Let's create another example where we idmap the rootfs filesystem
without a mapping for uid 0 and gid 0:
# Create an idmapped mount of for a full POSIX range of rootfs under
# /mnt but without a mapping for uid 0 to reduce attack surface
root@f2-vm:/# ./mount-idmapped --map-mount b:1:1:65536 / /mnt/
# Since we don't have a mapping for uid and gid 0 all files owned by
# uid and gid 0 should show up as uid and gid 65534:
root@f2-vm:/# ls -al /mnt/
total 664
drwxr-xr-x 31 nobody nogroup 4096 Oct 28 13:39 .
drwxr-xr-x 31 root root 4096 Oct 28 13:39 ..
lrwxrwxrwx 1 nobody nogroup 7 Aug 25 07:44 bin -> usr/bin
drwxr-xr-x 4 nobody nogroup 4096 Oct 28 13:17 boot
drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:48 dev
drwxr-xr-x 81 nobody nogroup 4096 Oct 28 04:00 etc
drwxr-xr-x 4 nobody nogroup 4096 Oct 28 04:00 home
lrwxrwxrwx 1 nobody nogroup 7 Aug 25 07:44 lib -> usr/lib
lrwxrwxrwx 1 nobody nogroup 9 Aug 25 07:44 lib32 -> usr/lib32
lrwxrwxrwx 1 nobody nogroup 9 Aug 25 07:44 lib64 -> usr/lib64
lrwxrwxrwx 1 nobody nogroup 10 Aug 25 07:44 libx32 -> usr/libx32
drwx------ 2 nobody nogroup 16384 Aug 25 07:47 lost+found
drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 media
drwxr-xr-x 31 nobody nogroup 4096 Oct 28 13:39 mnt
drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 opt
drwxr-xr-x 2 nobody nogroup 4096 Apr 15 2020 proc
drwx--x--x 6 nobody nogroup 4096 Oct 28 13:34 root
drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:46 run
lrwxrwxrwx 1 nobody nogroup 8 Aug 25 07:44 sbin -> usr/sbin
drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 srv
drwxr-xr-x 2 nobody nogroup 4096 Apr 15 2020 sys
drwxrwxrwt 10 nobody nogroup 4096 Oct 28 13:19 tmp
drwxr-xr-x 14 nobody nogroup 4096 Oct 20 13:00 usr
drwxr-xr-x 12 nobody nogroup 4096 Aug 25 07:45 var
# Since we do have a mapping for uid and gid 1000 all files owned by
# uid and gid 1000 should simply show up as uid and gid 1000:
root@f2-vm:/# ls -al /mnt/home/ubuntu/
total 40
drwxr-xr-x 3 ubuntu ubuntu 4096 Oct 28 00:43 .
drwxr-xr-x 4 nobody nogroup 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 2936 Oct 28 12:26 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
Link: https://lore.kernel.org/r/20210121131959.646623-39-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-ext4@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Extend some inode methods with an additional user namespace argument. A
filesystem that is aware of idmapped mounts will receive the user
namespace the mount has been marked with. This can be used for
additional permission checking and also to enable filesystems to
translate between uids and gids if they need to. We have implemented all
relevant helpers in earlier patches.
As requested we simply extend the exisiting inode method instead of
introducing new ones. This is a little more code churn but it's mostly
mechanical and doesnt't leave us with additional inode methods.
Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
The generic_fillattr() helper fills in the basic attributes associated
with an inode. Enable it to handle idmapped mounts. If the inode is
accessed through an idmapped mount map it into the mount's user
namespace before we store the uid and gid. If the initial user namespace
is passed nothing changes so non-idmapped mounts will see identical
behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-12-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
The posix acl permission checking helpers determine whether a caller is
privileged over an inode according to the acls associated with the
inode. Add helpers that make it possible to handle acls on idmapped
mounts.
The vfs and the filesystems targeted by this first iteration make use of
posix_acl_fix_xattr_from_user() and posix_acl_fix_xattr_to_user() to
translate basic posix access and default permissions such as the
ACL_USER and ACL_GROUP type according to the initial user namespace (or
the superblock's user namespace) to and from the caller's current user
namespace. Adapt these two helpers to handle idmapped mounts whereby we
either map from or into the mount's user namespace depending on in which
direction we're translating.
Similarly, cap_convert_nscap() is used by the vfs to translate user
namespace and non-user namespace aware filesystem capabilities from the
superblock's user namespace to the caller's user namespace. Enable it to
handle idmapped mounts by accounting for the mount's user namespace.
In addition the fileystems targeted in the first iteration of this patch
series make use of the posix_acl_chmod() and, posix_acl_update_mode()
helpers. Both helpers perform permission checks on the target inode. Let
them handle idmapped mounts. These two helpers are called when posix
acls are set by the respective filesystems to handle this case we extend
the ->set() method to take an additional user namespace argument to pass
the mount's user namespace down.
Link: https://lore.kernel.org/r/20210121131959.646623-9-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
When file attributes are changed most filesystems rely on the
setattr_prepare(), setattr_copy(), and notify_change() helpers for
initialization and permission checking. Let them handle idmapped mounts.
If the inode is accessed through an idmapped mount map it into the
mount's user namespace. Afterwards the checks are identical to
non-idmapped mounts. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.
Helpers that perform checks on the ia_uid and ia_gid fields in struct
iattr assume that ia_uid and ia_gid are intended values and have already
been mapped correctly at the userspace-kernelspace boundary as we
already do today. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Since I_DIRTY_TIME and I_DIRTY_INODE are mutually exclusive in i_state,
there's no need to check for I_DIRTY_TIME && !I_DIRTY_INODE. Just check
for I_DIRTY_TIME.
Also introduce a helper function in include/linux/fs.h to do this check.
Link: https://lore.kernel.org/r/20210112190253.64307-12-ebiggers@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
There is no need to call ->dirty_inode for lazytime timestamp updates
(i.e. for __mark_inode_dirty(I_DIRTY_TIME)), since by the definition of
lazytime, filesystems must ignore these updates. Filesystems only need
to care about the updated timestamps when they expire.
Therefore, only call ->dirty_inode when I_DIRTY_INODE is set.
Based on a patch from Christoph Hellwig:
https://lore.kernel.org/r/20200325122825.1086872-4-hch@lst.de
Link: https://lore.kernel.org/r/20210112190253.64307-6-ebiggers@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The wrapper is now useless since it does what
ext4_handle_dirty_metadata() does. Just remove it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201216101844.22917-9-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Protect all superblock modifications (including checksum computation)
with a superblock buffer lock. That way we are sure computed checksum
matches current superblock contents (a mismatch could cause checksum
failures in nojournal mode or if an unjournalled superblock update races
with a journalled one). Also we avoid modifying superblock contents
while it is being written out (which can cause DIF/DIX failures if we
are running in nojournal mode).
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201216101844.22917-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_bio_write_page does not need wbc parameter, since its parameter
io contains the io_wbc field. The io::io_wbc is initialized by
ext4_io_submit_init which is called in ext4_writepages and
ext4_writepage functions prior to ext4_bio_write_page.
Therefor, when ext4_bio_write_page is called, wbc info
has already been included in io parameter.
Signed-off-by: Lei Chen <lennychen@tencent.com>
Link: https://lore.kernel.org/r/1607669664-25656-1-git-send-email-lennychen@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The only difference between __ext4_abort() and __ext4_error() is that
the former one ignores errors=continue mount option. Unify the code to
reduce duplication.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201127113405.26867-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Xattr code using inodes with large xattr data can end up dropping last
inode reference (and thus deleting the inode) from places like
ext4_xattr_set_entry(). That function is called with transaction started
and so ext4_evict_inode() can deadlock against fs freezing like:
CPU1 CPU2
removexattr() freeze_super()
vfs_removexattr()
ext4_xattr_set()
handle = ext4_journal_start()
...
ext4_xattr_set_entry()
iput(old_ea_inode)
ext4_evict_inode(old_ea_inode)
sb->s_writers.frozen = SB_FREEZE_FS;
sb_wait_write(sb, SB_FREEZE_FS);
ext4_freeze()
jbd2_journal_lock_updates()
-> blocks waiting for all
handles to stop
sb_start_intwrite()
-> blocks as sb is already in SB_FREEZE_FS state
Generally it is advisable to delete inodes from a separate transaction
as it can consume quite some credits however in this case it would be
quite clumsy and furthermore the credits for inode deletion are quite
limited and already accounted for. So just tweak ext4_evict_inode() to
avoid freeze protection if we have transaction already started and thus
it is not really needed anyway.
Cc: stable@vger.kernel.org
Fixes: dec214d00e ("ext4: xattr inode deduplication")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201127110649.24730-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There are currently multiple forms of assertion, such as J_ASSERT().
J_ASEERT() is provided for the jbd module, which is a public module.
Maybe we should use custom ASSERT() like other file systems, such as
xfs, which would be better.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/1604764698-4269-1-git-send-email-brookxu@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fast commit file system states are recorded in
sbi->s_mount_flags. Fast commit expects these bit manipulations to be
atomic. This patch adds helpers to make those modifications atomic.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-21-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In case of fast commits, determine if the inode is dirty by checking
if the inode is on fast commit list. This also helps us get rid of
ext4_inode_info.i_fc_committed_subtid field.
Reported-by: Andrea Righi <andrea.righi@canonical.com>
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-18-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Firstly, pass handle to all ext4_fc_track_* functions and use
transaction id found in handle->h_transaction->h_tid for tracking fast
commit updates. Secondly, don't pass inode to
ext4_fc_track_link/create/unlink functions. inode can be found inside
these functions as d_inode(dentry). However, rename path is an
exeception. That's because in that case, we need inode that's not same
as d_inode(dentry). To handle that, add a couple of low-level wrapper
functions that take inode and dentry as arguments.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-5-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If inode gets evicted due to memory pressure, we have to remove it
from the fast commit list. However, that inode may have uncommitted
changes that fast commits will lose. So, just fall back to full
commits in this case. Also, rename the fast commit ineligiblity reason
from "EXT4_FC_REASON_MEM" to "EXT4_FC_REASON_MEM_NOMEM" for better
expression.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-3-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit afb585a97f "ext4: data=journal: write-protect pages on
j_submit_inode_data_buffers()") added calls ext4_jbd2_inode_add_write()
to track inode ranges whose mappings need to get write-protected during
transaction commits. However the added calls use wrong start of a range
(0 instead of page offset) and so write protection is not necessarily
effective. Use correct range start to fix the problem.
Fixes: afb585a97f ("ext4: data=journal: write-protect pages on j_submit_inode_data_buffers()")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201027132751.29858-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_inode_datasync_dirty() needs to return 'true' if the inode is
dirty, 'false' otherwise, but the logic seems to be incorrectly changed
by commit aa75f4d3da ("ext4: main fast-commit commit path").
This introduces a problem with swap files that are always failing to be
activated, showing this error in dmesg:
[ 34.406479] swapon: file is not committed
Simple test case to reproduce the problem:
# fallocate -l 8G swapfile
# chmod 0600 swapfile
# mkswap swapfile
# swapon swapfile
Fix the logic to return the proper state of the inode.
Link: https://lore.kernel.org/lkml/20201024131333.GA32124@xps-13-7390
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201027044915.2553163-1-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
During the stability test, there are some errors:
ext4_lookup:1590: inode #6967: comm fsstress: iget: checksum invalid.
If the inode->i_iblocks too big and doesn't set huge file flag, checksum
will not be recalculated when update the inode information to it's buffer.
If other inode marks the buffer dirty, then the inconsistent inode will
be flushed to disk.
Fix this problem by checking i_blocks in advance.
Cc: stable@kernel.org
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20201020013631.3796673-1-luomeng12@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds fast commit recovery path support for Ext4 file
system. We add several helper functions that are similar in spirit to
e2fsprogs journal recovery path handlers. Example of such functions
include - a simple block allocator, idempotent block bitmap update
function etc. Using these routines and the fast commit log in the fast
commit area, the recovery path (ext4_fc_replay()) performs fast commit
log recovery.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-8-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>