After the previous patch that speeded up the test (by avoiding neigh
discovery in IPv6), the BPF CI occasionally hits this error:
rcv tstamp unexpected pkt rcv tstamp: actual 0 == expected 0
The test complains about the cmsg returned from the recvmsg() does not
have the rcv timestamp. Setting skb->tstamp or not is
controlled by a kernel static key "netstamp_needed_key". The static
key is enabled whenever this is at least one sk with the SOCK_TIMESTAMP
set.
The test_redirect_dtime does use setsockopt() to turn on
the SOCK_TIMESTAMP for the reading sk. In the kernel
net_enable_timestamp() has a delay to enable the "netstamp_needed_key"
when CONFIG_JUMP_LABEL is set. This potential delay is the likely reason
for packet missing rcv timestamp occasionally.
This patch is to create udp sockets with SOCK_TIMESTAMP set.
It sends and receives some packets until the received packet
has a rcv timestamp. It currently retries at most 5 times with 1s
in between. This should be enough to wait for the "netstamp_needed_key".
It then holds on to the socket and only closes it at the end of the test.
This guarantees that the test has the "netstamp_needed_key" key turned
on from the beginning.
To simplify the udp sockets setup, they are sending/receiving packets
in the same netns (ns_dst is used) and communicate over the "lo" dev.
Hence, the patch enables the "lo" dev in the ns_dst.
Fixes: c803475fd8 ("bpf: selftests: test skb->tstamp in redirect_neigh")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240120060518.3604920-2-martin.lau@linux.dev
BPF CI has been reporting the tc_redirect_dtime test failing
from time to time:
test_inet_dtime:PASS:setns src 0 nsec
(network_helpers.c:253: errno: No route to host) Failed to connect to server
close_netns:PASS:setns 0 nsec
test_inet_dtime:FAIL:connect_to_fd unexpected connect_to_fd: actual -1 < expected 0
test_tcp_clear_dtime:PASS:tcp ip6 clear dtime ingress_fwdns_p100 0 nsec
The connect_to_fd failure (EHOSTUNREACH) is from the
test_tcp_clear_dtime() test and it is the very first IPv6 traffic
after setting up all the links, addresses, and routes.
The symptom is this first connect() is always slow. In my setup, it
could take ~3s.
After some tracing and tcpdump, the slowness is mostly spent in
the neighbor solicitation in the "ns_fwd" namespace while
the "ns_src" and "ns_dst" are fine.
I forced the kernel to drop the neighbor solicitation messages.
I can then reproduce EHOSTUNREACH. What actually happen could be:
- the neighbor advertisement came back a little slow.
- the "ns_fwd" namespace concluded a neighbor discovery failure
and triggered the ndisc_error_report() => ip6_link_failure() =>
icmpv6_send(skb, ICMPV6_DEST_UNREACH, ICMPV6_ADDR_UNREACH, 0)
- the client's connect() reports EHOSTUNREACH after receiving
the ICMPV6_DEST_UNREACH message.
The neigh table of both "ns_src" and "ns_dst" namespace has already
been manually populated but not the "ns_fwd" namespace. This patch
fixes it by manually populating the neigh table also in the "ns_fwd"
namespace.
Although the namespace configuration part had been existed before
the tc_redirect_dtime test, still Fixes-tagging the patch when
the tc_redirect_dtime test was added since it is the only test
hitting it so far.
Fixes: c803475fd8 ("bpf: selftests: test skb->tstamp in redirect_neigh")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240120060518.3604920-1-martin.lau@linux.dev
Create a new struct_ops type called bpf_testmod_ops within the bpf_testmod
module. When a struct_ops object is registered, the bpf_testmod module will
invoke test_2 from the module.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-15-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Adding fill_link_info test for perf event and testing we
get its values back through the bpf_link_info interface.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240119110505.400573-7-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that we get cookies for perf_event probes, adding tests
for cookie for kprobe/uprobe/tracepoint.
The perf_event test needs to be added completely and is coming
in following change.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240119110505.400573-6-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding cookies check for kprobe_multi fill_link_info test,
plus tests for invalid values related to cookies.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240119110505.400573-5-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit adds a sample selftest to demonstrate how we can use
bpf_sk_assign_tcp_reqsk() as the backend of SYN Proxy.
The test creates IPv4/IPv6 x TCP connections and transfer messages
over them on lo with BPF tc prog attached.
The tc prog will process SYN and returns SYN+ACK with the following
ISN and TS. In a real use case, this part will be done by other
hosts.
MSB LSB
ISN: | 31 ... 8 | 7 6 | 5 | 4 | 3 2 1 0 |
| Hash_1 | MSS | ECN | SACK | WScale |
TS: | 31 ... 8 | 7 ... 0 |
| Random | Hash_2 |
WScale in SYN is reused in SYN+ACK.
The client returns ACK, and tc prog will recalculate ISN and TS
from ACK and validate SYN Cookie.
If it's valid, the prog calls kfunc to allocate a reqsk for skb and
configure the reqsk based on the argument created from SYN Cookie.
Later, the reqsk will be processed in cookie_v[46]_check() to create
a connection.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240115205514.68364-7-kuniyu@amazon.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
reviews.llvm.org was LLVM's Phabricator instances for code review. It
has been abandoned in favor of GitHub pull requests. While the majority
of links in the kernel sources still work because of the work Fangrui
has done turning the dynamic Phabricator instance into a static archive,
there are some issues with that work, so preemptively convert all the
links in the kernel sources to point to the commit on GitHub.
Most of the commits have the corresponding differential review link in
the commit message itself so there should not be any loss of fidelity in
the relevant information.
Additionally, fix a typo in the xdpwall.c print ("LLMV" -> "LLVM") while
in the area.
Link: https://discourse.llvm.org/t/update-on-github-pull-requests/71540/172
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240111-bpf-update-llvm-phabricator-links-v2-1-9a7ae976bd64@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Various tests specify extra testing prog_flags when loading BPF
programs, like BPF_F_TEST_RND_HI32, and more recently also
BPF_F_TEST_REG_INVARIANTS. While BPF_F_TEST_RND_HI32 is old enough to
not cause much problem on older kernels, BPF_F_TEST_REG_INVARIANTS is
very fresh and unconditionally specifying it causes selftests to fail on
even slightly outdated kernels.
This breaks libbpf CI test against 4.9 and 5.15 kernels, it can break
some local development (done outside of VM), etc.
To prevent this, and guard against similar problems in the future, do
runtime detection of supported "testing flags", and only provide those
that host kernel recognizes.
Acked-by: Song Liu <song@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240109231738.575844-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test uses bpf_prog_get_info_by_fd() to obtain the xlated
instructions of the program first. Since these instructions have
already been rewritten by the verifier, the tests then checks whether
the rewritten instructions are as expected. And to ensure LLVM generates
code exactly as expected, use inline assembly and a naked function.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240105104819.3916743-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Both test_verifier and test_progs use get_xlated_program(), so moving
the helper into testing_helpers.h to reuse it.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20240105104819.3916743-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add feature detector of kernel-side arg:ctx (__arg_ctx) tag support. If
this is detected, libbpf will avoid doing any __arg_ctx-related BTF
rewriting and checks in favor of letting kernel handle this completely.
test_global_funcs/ctx_arg_rewrite subtest is adjusted to do the same
feature detection (albeit in much simpler, though round-about and
inefficient, way), and skip the tests. This is done to still be able to
execute this test on older kernels (like in libbpf CI).
Note, BPF token series ([0]) does a major refactor and code moving of
libbpf-internal feature detection "framework", so to avoid unnecessary
conflicts we keep newly added feature detection stand-alone with ad-hoc
result caching. Once things settle, there will be a small follow up to
re-integrate everything back and move code into its final place in
newly-added (by BPF token series) features.c file.
[0] https://patchwork.kernel.org/project/netdevbpf/list/?series=814209&state=*
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240118033143.3384355-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The patch adds a test to exercise the bpf_iter_udp batching
logic. It specifically tests the case that there are multiple
so_reuseport udp_sk in a bucket of the udp_table.
The test creates two sets of so_reuseport sockets and
each set on a different port. Meaning there will be
two buckets in the udp_table.
The test does the following:
1. read() 3 out of 4 sockets in the first bucket.
2. close() all sockets in the first bucket. This
will ensure the current bucket's offset in
the kernel does not affect the read() of the
following bucket.
3. read() all 4 sockets in the second bucket.
The test also reads one udp_sk at a time from
the bpf_iter_udp prog. The true case in
"do_test(..., bool onebyone)". This is the buggy case
that the previous patch fixed.
It also tests the "false" case in "do_test(..., bool onebyone)",
meaning the userspace reads the whole bucket. There is
no bug in this case but adding this test also while
at it.
Considering the way to have multiple tcp_sk in the same
bucket is similar (by using so_reuseport),
this patch also tests the bpf_iter_tcp even though the
bpf_iter_tcp batching logic works correctly.
Both IP v4 and v6 are exercising the same bpf_iter batching
code path, so only v6 is tested.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240112190530.3751661-4-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a test case to verify the fix for "prog->aux->dst_trampoline and
tgt_prog is NULL" branch in bpf_tracing_prog_attach. The sequence of
events:
1. load rawtp program
2. load fentry program with rawtp as target_fd
3. create tracing link for fentry program with target_fd = 0
4. repeat 3
Acked-by: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Link: https://lore.kernel.org/r/20240103190559.14750-5-9erthalion6@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Verify the fact that only one fentry prog could be attached to another
fentry, building up an attachment chain of limited size. Use existing
bpf_testmod as a start of the chain.
Acked-by: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Link: https://lore.kernel.org/r/20240103190559.14750-3-9erthalion6@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a test validating that libbpf uploads BTF and func_info with
rewritten type information for arguments of global subprogs that are
marked with __arg_ctx tag.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-10-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In the previous patch, the maximum data size for bpf_global_percpu_ma
is 512 bytes. This breaks selftest test_bpf_ma. The test is adjusted
in two aspects:
- Since the maximum allowed data size for bpf_global_percpu_ma is
512, remove all tests beyond that, names sizes 1024, 2048 and 4096.
- Previously the percpu data size is bucket_size - 8 in order to
avoid percpu allocation into the next bucket. This patch removed
such data size adjustment thanks to Patch 1.
Also, a better way to generate BTF type is used than adding
a member to the value struct.
Acked-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231222031807.1292853-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add test that replaces the same socket with itself. This exercises a
corner case where old element and new element have the same posck.
Test protocols: TCP, UDP, stream af_unix and dgram af_unix.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20231221232327.43678-6-john.fastabend@gmail.com
Add test with multiple maps where each socket is inserted in multiple
maps. Test protocols: TCP, UDP, stream af_unix and dgram af_unix.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20231221232327.43678-5-john.fastabend@gmail.com
Add test with a single map where each socket is inserted multiple
times. Test protocols: TCP, UDP, stream af_unix and dgram af_unix.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20231221232327.43678-4-john.fastabend@gmail.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZYVEqQAKCRDbK58LschI
gzH6AP9hVXLpHFTWMT0+2GK2lx69VX8zW1C0SmN7WHaxUbPN9QEAwzGnELfKk00P
0IKRHSl5abhVMX7JOM3sSOhCILeKjQg=
=wRLJ
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
bpf-next-for-netdev
The following pull-request contains BPF updates for your *net-next* tree.
We've added 22 non-merge commits during the last 3 day(s) which contain
a total of 23 files changed, 652 insertions(+), 431 deletions(-).
The main changes are:
1) Add verifier support for annotating user's global BPF subprogram arguments
with few commonly requested annotations for a better developer experience,
from Andrii Nakryiko.
These tags are:
- Ability to annotate a special PTR_TO_CTX argument
- Ability to annotate a generic PTR_TO_MEM as non-NULL
2) Support BPF verifier tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the like, from
Menglong Dong.
3) Fix a warning in bpf_mem_cache's check_obj_size() as reported by LKP, from Hou Tao.
4) Re-support uid/gid options when mounting bpffs which had to be reverted with
the prior token series revert to avoid conflicts, from Daniel Borkmann.
5) Fix a libbpf NULL pointer dereference in bpf_object__collect_prog_relos() found
from fuzzing the library with malformed ELF files, from Mingyi Zhang.
6) Skip DWARF sections in libbpf's linker sanity check given compiler options to
generate compressed debug sections can trigger a rejection due to misalignment,
from Alyssa Ross.
7) Fix an unnecessary use of the comma operator in BPF verifier, from Simon Horman.
8) Fix format specifier for unsigned long values in cpustat sample, from Colin Ian King.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test validating that freplace'ing another main (entry) BPF program
fails if the target BPF program doesn't have valid/expected func proto BTF.
We extend fexit_bpf2bpf test to allow to specify expected log message
for negative test cases (where freplace program is expected to fail to
load).
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231215011334.2307144-11-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of btf_check_subprog_arg_match(), use btf_prepare_func_args()
logic to validate "trustworthiness" of main BPF program's BTF information,
if it is present.
We ignored results of original BTF check anyway, often times producing
confusing and ominously-sounding "reg type unsupported for arg#0
function" message, which has no apparent effect on program correctness
and verification process.
All the -EFAULT returning sanity checks are already performed in
check_btf_info_early(), so there is zero reason to have this duplication
of logic between btf_check_subprog_call() and btf_check_subprog_arg_match().
Dropping btf_check_subprog_arg_match() simplifies
btf_check_func_arg_match() further removing `bool processing_call` flag.
One subtle bit that was done by btf_check_subprog_arg_match() was
potentially marking main program's BTF as unreliable. We do this
explicitly now with a dedicated simple check, preserving the original
behavior, but now based on well factored btf_prepare_func_args() logic.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231215011334.2307144-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The edge range checking for the registers is supported by the verifier
now, so we can activate the extended logic in
tools/testing/selftests/bpf/prog_tests/reg_bounds.c/range_cond() to test
such logic.
Besides, I added some cases to the "crafted_cases" array for this logic.
These cases are mainly used to test the edge of the src reg and dst reg.
All reg bounds testings has passed in the SLOW_TESTS mode:
$ export SLOW_TESTS=1 && ./test_progs -t reg_bounds -j
Summary: 65/18959832 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Menglong Dong <menglong8.dong@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231219134800.1550388-4-menglong8.dong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The "S32_MIN" is already defined with s32 casting, so there is no need
to do it again.
Signed-off-by: Menglong Dong <menglong8.dong@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231219134800.1550388-3-menglong8.dong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----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=stU2
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2023-12-18
This PR is larger than usual and contains changes in various parts
of the kernel.
The main changes are:
1) Fix kCFI bugs in BPF, from Peter Zijlstra.
End result: all forms of indirect calls from BPF into kernel
and from kernel into BPF work with CFI enabled. This allows BPF
to work with CONFIG_FINEIBT=y.
2) Introduce BPF token object, from Andrii Nakryiko.
It adds an ability to delegate a subset of BPF features from privileged
daemon (e.g., systemd) through special mount options for userns-bound
BPF FS to a trusted unprivileged application. The design accommodates
suggestions from Christian Brauner and Paul Moore.
Example:
$ sudo mkdir -p /sys/fs/bpf/token
$ sudo mount -t bpf bpffs /sys/fs/bpf/token \
-o delegate_cmds=prog_load:MAP_CREATE \
-o delegate_progs=kprobe \
-o delegate_attachs=xdp
3) Various verifier improvements and fixes, from Andrii Nakryiko, Andrei Matei.
- Complete precision tracking support for register spills
- Fix verification of possibly-zero-sized stack accesses
- Fix access to uninit stack slots
- Track aligned STACK_ZERO cases as imprecise spilled registers.
It improves the verifier "instructions processed" metric from single
digit to 50-60% for some programs.
- Fix verifier retval logic
4) Support for VLAN tag in XDP hints, from Larysa Zaremba.
5) Allocate BPF trampoline via bpf_prog_pack mechanism, from Song Liu.
End result: better memory utilization and lower I$ miss for calls to BPF
via BPF trampoline.
6) Fix race between BPF prog accessing inner map and parallel delete,
from Hou Tao.
7) Add bpf_xdp_get_xfrm_state() kfunc, from Daniel Xu.
It allows BPF interact with IPSEC infra. The intent is to support
software RSS (via XDP) for the upcoming ipsec pcpu work.
Experiments on AWS demonstrate single tunnel pcpu ipsec reaching
line rate on 100G ENA nics.
8) Expand bpf_cgrp_storage to support cgroup1 non-attach, from Yafang Shao.
9) BPF file verification via fsverity, from Song Liu.
It allows BPF progs get fsverity digest.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (164 commits)
bpf: Ensure precise is reset to false in __mark_reg_const_zero()
selftests/bpf: Add more uprobe multi fail tests
bpf: Fail uprobe multi link with negative offset
selftests/bpf: Test the release of map btf
s390/bpf: Fix indirect trampoline generation
selftests/bpf: Temporarily disable dummy_struct_ops test on s390
x86/cfi,bpf: Fix bpf_exception_cb() signature
bpf: Fix dtor CFI
cfi: Add CFI_NOSEAL()
x86/cfi,bpf: Fix bpf_struct_ops CFI
x86/cfi,bpf: Fix bpf_callback_t CFI
x86/cfi,bpf: Fix BPF JIT call
cfi: Flip headers
selftests/bpf: Add test for abnormal cnt during multi-kprobe attachment
selftests/bpf: Don't use libbpf_get_error() in kprobe_multi_test
selftests/bpf: Add test for abnormal cnt during multi-uprobe attachment
bpf: Limit the number of kprobes when attaching program to multiple kprobes
bpf: Limit the number of uprobes when attaching program to multiple uprobes
bpf: xdp: Register generic_kfunc_set with XDP programs
selftests/bpf: utilize string values for delegate_xxx mount options
...
====================
Link: https://lore.kernel.org/r/20231219000520.34178-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We fail to create uprobe if we pass negative offset. Add more tests
validating kernel-side error checking code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20231217215538.3361991-3-jolsa@kernel.org
When there is bpf_list_head or bpf_rb_root field in map value, the free
of map btf and the free of map value may run concurrently and there may
be use-after-free problem, so add two test cases to demonstrate it. And
the use-after-free problem can been easily reproduced by using bpf_next
tree and a KASAN-enabled kernel.
The first test case tests the racing between the free of map btf and the
free of array map. It constructs the racing by releasing the array map in
the end after other ref-counter of map btf has been released. To delay
the free of array map and make it be invoked after btf_free_rcu() is
invoked, it stresses system_unbound_wq by closing multiple percpu array
maps before it closes the array map.
The second case tests the racing between the free of map btf and the
free of inner map. Beside using the similar method as the first one
does, it uses bpf_map_delete_elem() to delete the inner map and to defer
the release of inner map after one RCU grace period.
The reason for using two skeletons is to prevent the release of outer
map and inner map in map_in_map_btf.c interfering the release of bpf
map in normal_map_btf.c.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20231216035510.4030605-1-houtao@huaweicloud.com
If an abnormally huge cnt is used for multi-kprobes attachment, the
following warning will be reported:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 392 at mm/util.c:632 kvmalloc_node+0xd9/0xe0
Modules linked in: bpf_testmod(O)
CPU: 1 PID: 392 Comm: test_progs Tainted: G ...... 6.7.0-rc3+ #32
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
......
RIP: 0010:kvmalloc_node+0xd9/0xe0
? __warn+0x89/0x150
? kvmalloc_node+0xd9/0xe0
bpf_kprobe_multi_link_attach+0x87/0x670
__sys_bpf+0x2a28/0x2bc0
__x64_sys_bpf+0x1a/0x30
do_syscall_64+0x36/0xb0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
RIP: 0033:0x7fbe067f0e0d
......
</TASK>
---[ end trace 0000000000000000 ]---
So add a test to ensure the warning is fixed.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231215100708.2265609-6-houtao@huaweicloud.com
Since libbpf v1.0, libbpf doesn't return error code embedded into the
pointer iteself, libbpf_get_error() is deprecated and it is basically
the same as using -errno directly.
So replace the invocations of libbpf_get_error() by -errno in
kprobe_multi_test. For libbpf_get_error() in test_attach_api_fails(),
saving -errno before invoking ASSERT_xx() macros just in case that
errno is overwritten by these macros. However, the invocation of
libbpf_get_error() in get_syms() should be kept intact, because
hashmap__new() still returns a pointer with embedded error code.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231215100708.2265609-5-houtao@huaweicloud.com
If an abnormally huge cnt is used for multi-uprobes attachment, the
following warning will be reported:
------------[ cut here ]------------
WARNING: CPU: 7 PID: 406 at mm/util.c:632 kvmalloc_node+0xd9/0xe0
Modules linked in: bpf_testmod(O)
CPU: 7 PID: 406 Comm: test_progs Tainted: G ...... 6.7.0-rc3+ #32
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ......
RIP: 0010:kvmalloc_node+0xd9/0xe0
......
Call Trace:
<TASK>
? __warn+0x89/0x150
? kvmalloc_node+0xd9/0xe0
bpf_uprobe_multi_link_attach+0x14a/0x480
__sys_bpf+0x14a9/0x2bc0
do_syscall_64+0x36/0xb0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
......
</TASK>
---[ end trace 0000000000000000 ]---
So add a test to ensure the warning is fixed.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231215100708.2265609-4-houtao@huaweicloud.com
Use both hex-based and string-based way to specify delegate mount
options for BPF FS.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231214225016.1209867-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit extends test_tunnel selftest to test the new XDP xfrm state
lookup kfunc.
Co-developed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/e704e9a4332e3eac7b458e4bfdec8fcc6984cdb6.1702593901.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
test_progs is better than a shell script b/c C is a bit easier to
maintain than shell. Also it's easier to use new infra like memory
mapped global variables from C via bpf skeleton.
Co-developed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/a350db9e08520c64544562d88ec005a039124d9b.1702593901.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With previous patch, one of subtests in test_btf_id becomes
flaky and may fail. The following is a failing example:
Error: #26 btf
Error: #26/174 btf/BTF ID
Error: #26/174 btf/BTF ID
btf_raw_create:PASS:check 0 nsec
btf_raw_create:PASS:check 0 nsec
test_btf_id:PASS:check 0 nsec
...
test_btf_id:PASS:check 0 nsec
test_btf_id:FAIL:check BTF lingersdo_test_get_info:FAIL:check failed: -1
The test tries to prove a btf_id not available after the map is closed.
But btf_id is freed only after workqueue and a rcu grace period, compared
to previous case just after a rcu grade period.
Depending on system workload, workqueue could take quite some time
to execute function bpf_map_free_deferred() which may cause the test failure.
Instead of adding arbitrary delays, let us remove the logic to
check btf_id availability after map is closed.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231214203820.1469402-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add test to sockmap_basic to ensure af_unix sockets that are not connected
can not be added to the map. Ensure we keep DGRAM sockets working however
as these will not be connected typically.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20231201180139.328529-3-john.fastabend@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Verify, whether VLAN tag and proto are set correctly.
To simulate "stripped" VLAN tag on veth, send test packet from VLAN
interface.
Also, add TO_STR() macro for convenience.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://lore.kernel.org/r/20231205210847.28460-19-larysa.zaremba@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The easiest way to simulate stripped VLAN tag in veth is to send a packet
from VLAN interface, attached to veth. Unfortunately, this approach is
incompatible with AF_XDP on TX side, because VLAN interfaces do not have
such feature.
Check both packets sent via AF_XDP TX and regular socket.
AF_INET packet will also have a filled-in hash type (XDP_RSS_TYPE_L4),
unlike AF_XDP packet, so more values can be checked.
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20231205210847.28460-18-larysa.zaremba@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a test to validate libbpf's implicit BPF token creation from default
BPF FS location (/sys/fs/bpf). Also validate that disabling this
implicit BPF token creation works.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231213190842.3844987-9-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a few tests that attempt to load BPF object containing privileged
map, program, and the one requiring mandatory BTF uploading into the
kernel (to validate token FD propagation to BPF_BTF_LOAD command).
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231213190842.3844987-8-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add some tests that exercise BPF_CORE_WRITE_BITFIELD() macro. Since some
non-trivial bit fiddling is going on, make sure various edge cases (such
as adjacent bitfields and bitfields at the edge of structs) are
exercised.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/72698a1080fa565f541d5654705255984ea2a029.1702325874.git.dxu@dxuuu.xyz
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
We're observing test flakiness on an arm64 platform which might not
have timestamps as precise as x86. The test log looks like:
test_time_tai:PASS:tai_open 0 nsec
test_time_tai:PASS:test_run 0 nsec
test_time_tai:PASS:tai_ts1 0 nsec
test_time_tai:PASS:tai_ts2 0 nsec
test_time_tai:FAIL:tai_forward unexpected tai_forward: actual 1702348135471494160 <= expected 1702348135471494160
test_time_tai:PASS:tai_gettime 0 nsec
test_time_tai:PASS:tai_future_ts1 0 nsec
test_time_tai:PASS:tai_future_ts2 0 nsec
test_time_tai:PASS:tai_range_ts1 0 nsec
test_time_tai:PASS:tai_range_ts2 0 nsec
#199 time_tai:FAIL
This patch changes ASSERT_GT to ASSERT_GE in the tai_forward assertion
so that equal timestamps are permitted.
Fixes: 64e15820b9 ("selftests/bpf: Add BPF-helper test for CLOCK_TAI access")
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231212182911.3784108-1-zhuyifei@google.com
Add selftest that establishes dead code-eliminated valid global subprog
(global_dead) and makes sure that it's not possible to freplace it, as
it's effectively not there. This test will fail with unexpected success
before 2afae08c9d ("bpf: Validate global subprogs lazily").
v2->v3:
- add missing err assignment (Alan);
- undo unnecessary signature changes in verifier_global_subprogs.c (Eduard);
v1->v2:
- don't rely on assembly output in verifier log, which changes between
compiler versions (CI).
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20231211174131.2324306-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Changed check expects passed data meta to be deemed invalid. After loosening
the requirement, the size of 36 bytes becomes valid. Therefore, increase
tested meta size to 256, so we do not get an unexpected success.
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231206205919.404415-2-larysa.zaremba@intel.com
The new bpf_cpumask_weight() kfunc can be used to count the number of
bits that are set in a struct cpumask* kptr. Let's add a selftest to
verify its behavior.
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231207210843.168466-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
To stay consistent with the naming pattern used for similar cases in BPF
UAPI (__MAX_BPF_ATTACH_TYPE, etc), rename MAX_BPF_LINK_TYPE into
__MAX_BPF_LINK_TYPE.
Also similar to MAX_BPF_ATTACH_TYPE and MAX_BPF_REG, add:
#define MAX_BPF_LINK_TYPE __MAX_BPF_LINK_TYPE
Not all __MAX_xxx enums have such #define, so I'm not sure if we should
add it or not, but I figured I'll start with a completely backwards
compatible way, and we can drop that, if necessary.
Also adjust a selftest that used MAX_BPF_LINK_TYPE enum.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231206190920.1651226-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test that tries to trigger the BUG_IN during early map update
in prog_array_map_poke_run function.
The idea is to share prog array map between thread that constantly
updates it and another one loading a program that uses that prog
array.
Eventually we will hit a place where the program is ok to be updated
(poke->tailcall_target_stable check) but the address is still not
registered in kallsyms, so the bpf_arch_text_poke returns -EINVAL
and cause imbalance for the next tail call update check, which will
fail with -EBUSY in bpf_arch_text_poke as described in previous fix.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20231206083041.1306660-3-jolsa@kernel.org
Add a selftest that attempts to conceptually replicate intended BPF
token use cases inside user namespaced container.
Child process is forked. It is then put into its own userns and mountns.
Child creates BPF FS context object. This ensures child userns is
captured as the owning userns for this instance of BPF FS. Given setting
delegation mount options is privileged operation, we ensure that child
cannot set them.
This context is passed back to privileged parent process through Unix
socket, where parent sets up delegation options, creates, and mounts it
as a detached mount. This mount FD is passed back to the child to be
used for BPF token creation, which allows otherwise privileged BPF
operations to succeed inside userns.
We validate that all of token-enabled privileged commands (BPF_BTF_LOAD,
BPF_MAP_CREATE, and BPF_PROG_LOAD) work as intended. They should only
succeed inside the userns if a) BPF token is provided with proper
allowed sets of commands and types; and b) namespaces CAP_BPF and other
privileges are set. Lacking a) or b) should lead to -EPERM failures.
Based on suggested workflow by Christian Brauner ([0]).
[0] https://lore.kernel.org/bpf/20230704-hochverdient-lehne-eeb9eeef785e@brauner/
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-17-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add basic support of BPF token to BPF_PROG_LOAD. Wire through a set of
allowed BPF program types and attach types, derived from BPF FS at BPF
token creation time. Then make sure we perform bpf_token_capable()
checks everywhere where it's relevant.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow providing token_fd for BPF_MAP_CREATE command to allow controlled
BPF map creation from unprivileged process through delegated BPF token.
Wire through a set of allowed BPF map types to BPF token, derived from
BPF FS at BPF token creation time. This, in combination with allowed_cmds
allows to create a narrowly-focused BPF token (controlled by privileged
agent) with a restrictive set of BPF maps that application can attempt
to create.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There was some confusion amongst Meta sched_ext folks regarding whether
stashing bpf_rb_root - the tree itself, rather than a single node - was
supported. This patch adds a small test which demonstrates this
functionality: a local kptr with rb_root is created, a node is created
and added to the tree, then the tree is kptr_xchg'd into a mapval.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20231204211722.571346-1-davemarchevsky@fb.com
Syscall program is running with rcu_read_lock_trace being held, so if
bpf_map_update_elem() or bpf_map_delete_elem() invokes
synchronize_rcu_tasks_trace() when operating on an outer map, there will
be dead-lock, so add a test to guarantee that it is dead-lock free.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231204140425.1480317-8-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add test cases to test the race between the destroy of inner map due to
map-in-map update and the access of inner map in bpf program. The
following 4 combinations are added:
(1) array map in map array + bpf program
(2) array map in map array + sleepable bpf program
(3) array map in map htab + bpf program
(4) array map in map htab + sleepable bpf program
Before applying the fixes, when running `./test_prog -a map_in_map`, the
following error was reported:
==================================================================
BUG: KASAN: slab-use-after-free in array_map_update_elem+0x48/0x3e0
Read of size 4 at addr ffff888114f33824 by task test_progs/1858
CPU: 1 PID: 1858 Comm: test_progs Tainted: G O 6.6.0+ #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ......
Call Trace:
<TASK>
dump_stack_lvl+0x4a/0x90
print_report+0xd2/0x620
kasan_report+0xd1/0x110
__asan_load4+0x81/0xa0
array_map_update_elem+0x48/0x3e0
bpf_prog_be94a9f26772f5b7_access_map_in_array+0xe6/0xf6
trace_call_bpf+0x1aa/0x580
kprobe_perf_func+0xdd/0x430
kprobe_dispatcher+0xa0/0xb0
kprobe_ftrace_handler+0x18b/0x2e0
0xffffffffc02280f7
RIP: 0010:__x64_sys_getpgid+0x1/0x30
......
</TASK>
Allocated by task 1857:
kasan_save_stack+0x26/0x50
kasan_set_track+0x25/0x40
kasan_save_alloc_info+0x1e/0x30
__kasan_kmalloc+0x98/0xa0
__kmalloc_node+0x6a/0x150
__bpf_map_area_alloc+0x141/0x170
bpf_map_area_alloc+0x10/0x20
array_map_alloc+0x11f/0x310
map_create+0x28a/0xb40
__sys_bpf+0x753/0x37c0
__x64_sys_bpf+0x44/0x60
do_syscall_64+0x36/0xb0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Freed by task 11:
kasan_save_stack+0x26/0x50
kasan_set_track+0x25/0x40
kasan_save_free_info+0x2b/0x50
__kasan_slab_free+0x113/0x190
slab_free_freelist_hook+0xd7/0x1e0
__kmem_cache_free+0x170/0x260
kfree+0x9b/0x160
kvfree+0x2d/0x40
bpf_map_area_free+0xe/0x20
array_map_free+0x120/0x2c0
bpf_map_free_deferred+0xd7/0x1e0
process_one_work+0x462/0x990
worker_thread+0x370/0x670
kthread+0x1b0/0x200
ret_from_fork+0x3a/0x70
ret_from_fork_asm+0x1b/0x30
Last potentially related work creation:
kasan_save_stack+0x26/0x50
__kasan_record_aux_stack+0x94/0xb0
kasan_record_aux_stack_noalloc+0xb/0x20
__queue_work+0x331/0x950
queue_work_on+0x75/0x80
bpf_map_put+0xfa/0x160
bpf_map_fd_put_ptr+0xe/0x20
bpf_fd_array_map_update_elem+0x174/0x1b0
bpf_map_update_value+0x2b7/0x4a0
__sys_bpf+0x2551/0x37c0
__x64_sys_bpf+0x44/0x60
do_syscall_64+0x36/0xb0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231204140425.1480317-7-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This selftests shows a proof of concept method to use BPF LSM to enforce
file signature. This test is added to verify_pkcs7_sig, so that some
existing logic can be reused.
This file signature method uses fsverity, which provides reliable and
efficient hash (known as digest) of the file. The file digest is signed
with asymmetic key, and the signature is stored in xattr. At the run time,
BPF LSM reads file digest and the signature, and then checks them against
the public key.
Note that this solution does NOT require FS_VERITY_BUILTIN_SIGNATURES.
fsverity is only used to provide file digest. The signature verification
and access control is all implemented in BPF LSM.
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231129234417.856536-7-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add selftests for two new filesystem kfuncs:
1. bpf_get_file_xattr
2. bpf_get_fsverity_digest
These tests simply make sure the two kfuncs work. Another selftest will be
added to demonstrate how to use these kfuncs to verify file signature.
CONFIG_FS_VERITY is added to selftests config. However, this is not
sufficient to guarantee bpf_get_fsverity_digest works. This is because
fsverity need to be enabled at file system level (for example, with tune2fs
on ext4). If local file system doesn't have this feature enabled, just skip
the test.
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231129234417.856536-6-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZWiCPAAKCRDbK58LschI
g4djAQC1FdqCRIFkhbiIRNHTgHjnfQShELQbd9ofJqzylLqmmgD+JI1E7D9SXagm
pIXQ26EGmq8/VcCT3VLncA8EsC76Gg4=
=Xowm
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-11-30
We've added 30 non-merge commits during the last 7 day(s) which contain
a total of 58 files changed, 1598 insertions(+), 154 deletions(-).
The main changes are:
1) Add initial TX metadata implementation for AF_XDP with support in mlx5
and stmmac drivers. Two types of offloads are supported right now, that
is, TX timestamp and TX checksum offload, from Stanislav Fomichev with
stmmac implementation from Song Yoong Siang.
2) Change BPF verifier logic to validate global subprograms lazily instead
of unconditionally before the main program, so they can be guarded using
BPF CO-RE techniques, from Andrii Nakryiko.
3) Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter, from Jiri Olsa.
4) Use pkg-config in BPF selftests to determine ld flags which is
in particular needed for linking statically, from Akihiko Odaki.
5) Fix a few BPF selftest failures to adapt to the upcoming LLVM18,
from Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (30 commits)
bpf/tests: Remove duplicate JSGT tests
selftests/bpf: Add TX side to xdp_hw_metadata
selftests/bpf: Convert xdp_hw_metadata to XDP_USE_NEED_WAKEUP
selftests/bpf: Add TX side to xdp_metadata
selftests/bpf: Add csum helpers
selftests/xsk: Support tx_metadata_len
xsk: Add option to calculate TX checksum in SW
xsk: Validate xsk_tx_metadata flags
xsk: Document tx_metadata_len layout
net: stmmac: Add Tx HWTS support to XDP ZC
net/mlx5e: Implement AF_XDP TX timestamp and checksum offload
tools: ynl: Print xsk-features from the sample
xsk: Add TX timestamp and TX checksum offload support
xsk: Support tx_metadata_len
selftests/bpf: Use pkg-config for libelf
selftests/bpf: Override PKG_CONFIG for static builds
selftests/bpf: Choose pkg-config for the target
bpftool: Add support to display uprobe_multi links
selftests/bpf: Add link_info test for uprobe_multi link
selftests/bpf: Use bpf_link__destroy in fill_link_info tests
...
====================
Conflicts:
Documentation/netlink/specs/netdev.yaml:
839ff60df3 ("net: page_pool: add nlspec for basic access to page pools")
48eb03dd26 ("xsk: Add TX timestamp and TX checksum offload support")
https://lore.kernel.org/all/20231201094705.1ee3cab8@canb.auug.org.au/
While at it also regen, tree is dirty after:
48eb03dd26 ("xsk: Add TX timestamp and TX checksum offload support")
looks like code wasn't re-rendered after "render-max" was removed.
Link: https://lore.kernel.org/r/20231130145708.32573-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds a test where both pairs of a af_unix paired socket are put into a
BPF map. This ensures that when we tear down the af_unix pair we don't have
any issues on sockmap side with ordering and reference counting.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20231129012557.95371-3-john.fastabend@gmail.com
Request TX timestamp and make sure it's not empty.
Request TX checksum offload (SW-only) and make sure it's resolved
to the correct one.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20231127190319.1190813-12-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding fill_link_info test for uprobe_multi link.
Setting up uprobes with bogus ref_ctr_offsets and cookie values
to test all the bpf_link_info::uprobe_multi fields.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20231125193130.834322-6-jolsa@kernel.org
The fill_link_info test keeps skeleton open and just creates
various links. We are wrongly calling bpf_link__detach after
each test to close them, we need to call bpf_link__destroy.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/bpf/20231125193130.834322-5-jolsa@kernel.org
We need to get offsets for static variables in following changes,
so making elf_resolve_syms_offsets to take st_type value as argument
and passing it to elf_sym_iter_new.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20231125193130.834322-2-jolsa@kernel.org
Add a few test that validate BPF verifier's lazy approach to validating
global subprogs.
We check that global subprogs that are called transitively through
another global subprog is validated.
We also check that invalid global subprog is not validated, if it's not
called from the main program.
And we also check that main program is always validated first, before
any of the subprogs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231124035937.403208-4-andrii@kernel.org
A set of test cases to check behavior of callback handling logic,
check if verifier catches the following situations:
- program not safe on second callback iteration;
- program not safe on zero callback iterations;
- infinite loop inside a callback.
Verify that callback logic works for bpf_loop, bpf_for_each_map_elem,
bpf_user_ringbuf_drain, bpf_find_vma.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-8-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reduce verboseness of test_progs' output in reg_bounds set of tests with
two changes.
First, instead of each different operator (<, <=, >, ...) being it's own
subtest, combine all different ops for the same (x, y, init_t, cond_t)
values into single subtest. Instead of getting 6 subtests, we get one
generic one, e.g.:
#192/53 reg_bounds_crafted/(s64)[0xffffffffffffffff; 0] (s64)<op> 0xffffffff00000000:OK
Second, for random generated test cases, treat all of them as a single
test to eliminate very verbose output with random values in them. So now
we'll just get one line per each combination of (init_t, cond_t),
instead of 6 x 25 = 150 subtests before this change:
#225 reg_bounds_rand_consts_s32_s32:OK
Given we reduce verboseness so much, it makes sense to do a bit more
random testing, so we also bump default number of random tests to 100,
up from 25. This doesn't increase runtime significantly, especially in
parallelized mode.
With all the above changes we still make sure that we have all the
information necessary for reproducing test case if it happens to fail.
That includes reporting random seed and specific operator that is
failing. Those will only be printed to console if related test/subtest
fails, so it doesn't have any added verboseness implications.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231120180452.145849-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extend the existing tc_redirect selftest to also cover netkit devices
for exercising the bpf_redirect_peer() code paths, so that we have both
veth as well as netkit covered, all tests still pass after this change.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20231114004220.6495-9-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
No functional changes to the test case, but just renaming various functions,
variables, etc, to remove veth part of their name for making it more generic
and reusable later on (e.g. for netkit).
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20231114004220.6495-8-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Instead of always printing numbers as either decimals (and in some
cases, like for "imm=%llx", in hexadecimals), decide the form based on
actual values. For numbers in a reasonably small range (currently,
[0, U16_MAX] for unsigned values, and [S16_MIN, S16_MAX] for signed ones),
emit them as decimals. In all other cases, even for signed values,
emit them in hexadecimals.
For large values hex form is often times way more useful: it's easier to
see an exact difference between 0xffffffff80000000 and 0xffffffff7fffffff,
than between 18446744071562067966 and 18446744071562067967, as one
particular example.
Small values representing small pointer offsets or application
constants, on the other hand, are way more useful to be represented in
decimal notation.
Adjust reg_bounds register state parsing logic to take into account this
change.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231118034623.3320920-8-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Simplify BPF verifier log further by omitting default (and frequently
irrelevant) off=0 and imm=0 parts for non-SCALAR_VALUE registers. As can
be seen from fixed tests, this is often a visual noise for PTR_TO_CTX
register and even for PTR_TO_PACKET registers.
Omitting default values follows the rest of register state logic: we
omit default values to keep verifier log succinct and to highlight
interesting state that deviates from default one. E.g., we do the same
for var_off, when it's unknown, which gives no additional information.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231118034623.3320920-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In complicated real-world applications, whenever debugging some
verification error through verifier log, it often would be very useful
to see map name for PTR_TO_MAP_VALUE register. Usually this needs to be
inferred from key/value sizes and maybe trying to guess C code location,
but it's not always clear.
Given verifier has the name, and it's never too long, let's just emit it
for ptr_to_map_key, ptr_to_map_value, and const_ptr_to_map registers. We
reshuffle the order a bit, so that map name, key size, and value size
appear before offset and immediate values, which seems like a more
logical order.
Current output:
R1_w=map_ptr(map=array_map,ks=4,vs=8,off=0,imm=0)
But we'll get rid of useless off=0 and imm=0 parts in the next patch.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231118034623.3320920-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new flag -r (--test-sanity), similar to -t (--test-states), to add
extra BPF program flags when loading BPF programs.
This allows to use veristat to easily catch sanity violations in
production BPF programs.
reg_bounds tests are also enforcing BPF_F_TEST_SANITY_STRICT flag now.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231112010609.848406-13-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make sure to set BPF_F_TEST_SANITY_STRICT program flag by default across
most verifier tests (and a bunch of others that set custom prog flags).
There are currently two tests that do fail validation, if enforced
strictly: verifier_bounds/crossing_64_bit_signed_boundary_2 and
verifier_bounds/crossing_32_bit_signed_boundary_2. To accommodate them,
we teach test_loader a flag negation:
__flag(!<flagname>) will *clear* specified flag, allowing easy opt-out.
We apply __flag(!BPF_F_TEST_SANITY_STRICT) to these to tests.
Also sprinkle BPF_F_TEST_SANITY_STRICT everywhere where we already set
test-only BPF_F_TEST_RND_HI32 flag, for completeness.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231112010609.848406-12-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add random cases generation to reg_bounds.c and run them without
SLOW_TESTS=1 to increase a chance of BPF CI catching latent issues.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231112010609.848406-11-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that verifier supports range vs range bounds adjustments, validate
that by checking each generated range against every other generated
range, across all supported operators (everything by JSET).
We also add few cases that were problematic during development either
for verifier or for selftest's range tracking implementation.
Note that we utilize the same trick with splitting everything into
multiple independent parallelizable tests, but init_t and cond_t. This
brings down verification time in parallel mode from more than 8 hours
down to less that 1.5 hours. 106 million cases were successfully
validate for range vs range logic, in addition to about 7 million range
vs const cases, added in earlier patch.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231112010609.848406-10-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add test to validate BPF verifier's register range bounds tracking logic.
The main bulk is a lot of auto-generated tests based on a small set of
seed values for lower and upper 32 bits of full 64-bit values.
Currently we validate only range vs const comparisons, but the idea is
to start validating range over range comparisons in subsequent patch set.
When setting up initial register ranges we treat registers as one of
u64/s64/u32/s32 numeric types, and then independently perform conditional
comparisons based on a potentially different u64/s64/u32/s32 types. This
tests lots of tricky cases of deriving bounds information across
different numeric domains.
Given there are lots of auto-generated cases, we guard them behind
SLOW_TESTS=1 envvar requirement, and skip them altogether otherwise.
With current full set of upper/lower seed value, all supported
comparison operators and all the combinations of u64/s64/u32/s32 number
domains, we get about 7.7 million tests, which run in about 35 minutes
on my local qemu instance without parallelization. But we also split
those tests by init/cond numeric types, which allows to rely on
test_progs's parallelization of tests with `-j` option, getting run time
down to about 5 minutes on 8 cores. It's still something that shouldn't
be run during normal test_progs run. But we can run it a reasonable
time, and so perhaps a nightly CI test run (once we have it) would be
a good option for this.
We also add a small set of tricky conditions that came up during
development and triggered various bugs or corner cases in either
selftest's reimplementation of range bounds logic or in verifier's logic
itself. These are fast enough to be run as part of normal test_progs
test run and are great for a quick sanity checking.
Let's take a look at test output to understand what's going on:
$ sudo ./test_progs -t reg_bounds_crafted
#191/1 reg_bounds_crafted/(u64)[0; 0xffffffff] (u64)< 0:OK
...
#191/115 reg_bounds_crafted/(u64)[0; 0x17fffffff] (s32)< 0:OK
...
#191/137 reg_bounds_crafted/(u64)[0xffffffff; 0x100000000] (u64)== 0:OK
Each test case is uniquely and fully described by this generated string.
E.g.: "(u64)[0; 0x17fffffff] (s32)< 0". This means that we
initialize a register (R6) in such a way that verifier knows that it can
have a value in [(u64)0; (u64)0x17fffffff] range. Another
register (R7) is also set up as u64, but this time a constant (zero in
this case). They then are compared using 32-bit signed < operation.
Resulting TRUE/FALSE branches are evaluated (including cases where it's
known that one of the branches will never be taken, in which case we
validate that verifier also determines this as a dead code). Test
validates that verifier's final register state matches expected state
based on selftest's own reg_state logic, implemented from scratch for
cross-checking purposes.
These test names can be conveniently used for further debugging, and if -vv
verboseness is requested we can get a corresponding verifier log (with
mark_precise logs filtered out as irrelevant and distracting). Example below is
slightly redacted for brevity, omitting irrelevant register output in
some places, marked with [...].
$ sudo ./test_progs -a 'reg_bounds_crafted/(u32)[0; U32_MAX] (s32)< -1' -vv
...
VERIFIER LOG:
========================
func#0 @0
0: R1=ctx(off=0,imm=0) R10=fp0
0: (05) goto pc+2
3: (85) call bpf_get_current_pid_tgid#14 ; R0_w=scalar()
4: (bc) w6 = w0 ; R0_w=scalar() R6_w=scalar(smin=0,smax=umax=4294967295,var_off=(0x0; 0xffffffff))
5: (85) call bpf_get_current_pid_tgid#14 ; R0_w=scalar()
6: (bc) w7 = w0 ; R0_w=scalar() R7_w=scalar(smin=0,smax=umax=4294967295,var_off=(0x0; 0xffffffff))
7: (b4) w1 = 0 ; R1_w=0
8: (b4) w2 = -1 ; R2=4294967295
9: (ae) if w6 < w1 goto pc-9
9: R1=0 R6=scalar(smin=0,smax=umax=4294967295,var_off=(0x0; 0xffffffff))
10: (2e) if w6 > w2 goto pc-10
10: R2=4294967295 R6=scalar(smin=0,smax=umax=4294967295,var_off=(0x0; 0xffffffff))
11: (b4) w1 = -1 ; R1_w=4294967295
12: (b4) w2 = -1 ; R2_w=4294967295
13: (ae) if w7 < w1 goto pc-13 ; R1_w=4294967295 R7=4294967295
14: (2e) if w7 > w2 goto pc-14
14: R2_w=4294967295 R7=4294967295
15: (bc) w0 = w6 ; [...] R6=scalar(id=1,smin=0,smax=umax=4294967295,var_off=(0x0; 0xffffffff))
16: (bc) w0 = w7 ; [...] R7=4294967295
17: (ce) if w6 s< w7 goto pc+3 ; R6=scalar(id=1,smin=0,smax=umax=4294967295,smin32=-1,var_off=(0x0; 0xffffffff)) R7=4294967295
18: (bc) w0 = w6 ; [...] R6=scalar(id=1,smin=0,smax=umax=4294967295,smin32=-1,var_off=(0x0; 0xffffffff))
19: (bc) w0 = w7 ; [...] R7=4294967295
20: (95) exit
from 17 to 21: [...]
21: (bc) w0 = w6 ; [...] R6=scalar(id=1,smin=umin=umin32=2147483648,smax=umax=umax32=4294967294,smax32=-2,var_off=(0x80000000; 0x7fffffff))
22: (bc) w0 = w7 ; [...] R7=4294967295
23: (95) exit
from 13 to 1: [...]
1: [...]
1: (b7) r0 = 0 ; R0_w=0
2: (95) exit
processed 24 insns (limit 1000000) max_states_per_insn 0 total_states 2 peak_states 2 mark_read 1
=====================
Verifier log above is for `(u32)[0; U32_MAX] (s32)< -1` use cases, where u32
range is used for initialization, followed by signed < operator. Note
how we use w6/w7 in this case for register initialization (it would be
R6/R7 for 64-bit types) and then `if w6 s< w7` for comparison at
instruction #17. It will be `if R6 < R7` for 64-bit unsigned comparison.
Above example gives a good impression of the overall structure of a BPF
programs generated for reg_bounds tests.
In the future, this "framework" can be extended to test not just
conditional jumps, but also arithmetic operations. Adding randomized
testing is another possibility.
Some implementation notes. We basically have our own generics-like
operations on numbers, where all the numbers are stored in u64, but how
they are interpreted is passed as runtime argument enum num_t. Further,
`struct range` represents a bounds range, and those are collected
together into a minimal `struct reg_state`, which collects range bounds
across all four numberical domains: u64, s64, u32, s64.
Based on these primitives and `enum op` representing possible
conditional operation (<, <=, >, >=, ==, !=), there is a set of generic
helpers to perform "range arithmetics", which is used to maintain struct
reg_state. We simulate what verifier will do for reg bounds of R6 and R7
registers using these range and reg_state primitives. Simulated
information is used to determine branch taken conclusion and expected
exact register state across all four number domains.
Implementation of "range arithmetics" is more generic than what verifier
is currently performing: it allows range over range comparisons and
adjustments. This is the intended end goal of this patch set overall and verifier
logic is enhanced in subsequent patches in this series to handle range
vs range operations, at which point selftests are extended to validate
these conditions as well. For now it's range vs const cases only.
Note that tests are split into multiple groups by their numeric types
for initialization of ranges and for comparison operation. This allows
to use test_progs's -j parallelization to speed up tests, as we now have
16 groups of parallel running tests. Overall reduction of running time
that allows is pretty good, we go down from more than 30 minutes to
slightly less than 5 minutes running time.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20231112010609.848406-8-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add selftests for cgroup1 hierarchy.
The result as follows,
$ tools/testing/selftests/bpf/test_progs --name=cgroup1_hierarchy
#36/1 cgroup1_hierarchy/test_cgroup1_hierarchy:OK
#36/2 cgroup1_hierarchy/test_root_cgid:OK
#36/3 cgroup1_hierarchy/test_invalid_level:OK
#36/4 cgroup1_hierarchy/test_invalid_cgid:OK
#36/5 cgroup1_hierarchy/test_invalid_hid:OK
#36/6 cgroup1_hierarchy/test_invalid_cgrp_name:OK
#36/7 cgroup1_hierarchy/test_invalid_cgrp_name2:OK
#36/8 cgroup1_hierarchy/test_sleepable_prog:OK
#36 cgroup1_hierarchy:OK
Summary: 1/8 PASSED, 0 SKIPPED, 0 FAILED
Besides, I also did some stress test similar to the patch #2 in this
series, as follows (with CONFIG_PROVE_RCU_LIST enabled):
- Continuously mounting and unmounting named cgroups in some tasks,
for example:
cgrp_name=$1
while true
do
mount -t cgroup -o none,name=$cgrp_name none /$cgrp_name
umount /$cgrp_name
done
- Continuously run this selftest concurrently,
while true; do ./test_progs --name=cgroup1_hierarchy; done
They can ran successfully without any RCU warnings in dmesg.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20231111090034.4248-7-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Include the current pid in the classid cgroup path. This way, different
testers relying on classid-based configurations will have distinct classid
cgroup directories, enabling them to run concurrently. Additionally, we
leverage the current pid as the classid, ensuring unique identification.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20231111090034.4248-4-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This is a follow up to:
commit b8e3a87a62 ("bpf: Add crosstask check to __bpf_get_stack").
This test ensures that the task iterator only gets a single
user stack (for the current task).
Signed-off-by: Jordan Rome <linux@jordanrome.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20231112023010.144675-1-linux@jordanrome.com
This patch demonstrates that verifier changes earlier in this series
result in bpf_refcount_acquire(mapval->stashed_kptr) passing
verification. The added test additionally validates that stashing a kptr
in mapval and - in a separate BPF program - refcount_acquiring the kptr
without unstashing works as expected at runtime.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20231107085639.3016113-7-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some compilers complain about get_pprint_mapv_size() not returning value
in some code paths. Fix with explicit return.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231102033759.2541186-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Compiler complains about malloc(). We also don't need to dynamically
allocate anything, so make the life easier by using statically sized
buffer.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231102033759.2541186-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since some malloc calls in bpf_iter may at times fail,
this patch adds the appropriate fail checks, and ensures that
any previously allocated resource is appropriately destroyed
before returning the function.
Signed-off-by: Yuran Pereira <yuran.pereira@hotmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/DB3PR10MB6835F0ECA792265FA41FC39BE8A3A@DB3PR10MB6835.EURPRD10.PROD.OUTLOOK.COM
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
As seen from previous commit that fix backtracking for BPF_ALU | BPF_TO_BE
| BPF_END, both BPF_NEG and BPF_END require special handling. Add tests
written with inline assembly to check that the verifier does not incorrecly
use the src_reg field of BPF_NEG and BPF_END (including bswap added in v4).
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20231102053913.12004-4-shung-hsi.yu@suse.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This Patch add a test to prove css_task iter can be used in normal
sleepable progs.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231031050438.93297-4-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds a test which demonstrates how css_task iter can be combined
with cgroup iter and it won't cause deadlock, though cgroup iter is not
sleepable.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231031050438.93297-3-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----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=sk8+
-----END PGP SIGNATURE-----
Merge tag 'for-6.7/io_uring-sockopt-2023-10-30' of git://git.kernel.dk/linux
Pull io_uring {get,set}sockopt support from Jens Axboe:
"This adds support for using getsockopt and setsockopt via io_uring.
The main use cases for this is to enable use of direct descriptors,
rather than first instantiating a normal file descriptor, doing the
option tweaking needed, then turning it into a direct descriptor. With
this support, we can avoid needing a regular file descriptor
completely.
The net and bpf bits have been signed off on their side"
* tag 'for-6.7/io_uring-sockopt-2023-10-30' of git://git.kernel.dk/linux:
selftests/bpf/sockopt: Add io_uring support
io_uring/cmd: Introduce SOCKET_URING_OP_SETSOCKOPT
io_uring/cmd: Introduce SOCKET_URING_OP_GETSOCKOPT
io_uring/cmd: return -EOPNOTSUPP if net is disabled
selftests/net: Extract uring helpers to be reusable
tools headers: Grab copy of io_uring.h
io_uring/cmd: Pass compat mode in issue_flags
net/socket: Break down __sys_getsockopt
net/socket: Break down __sys_setsockopt
bpf: Add sockptr support for setsockopt
bpf: Add sockptr support for getsockopt
Add the following 3 test cases for bpf memory allocator:
1) Do allocation in bpf program and free through map free
2) Do batch per-cpu allocation and per-cpu free in bpf program
3) Do per-cpu allocation in bpf program and free through map free
For per-cpu allocation, because per-cpu allocation can not refill timely
sometimes, so test 2) and test 3) consider it is OK for
bpf_percpu_obj_new_impl() to return NULL.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231020133202.4043247-8-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The linked list failure test 'pop_front_off' and 'pop_back_off'
currently rely on matching exact instruction and register values. The
purpose of the test is to ensure the offset is correctly incremented for
the returned pointers from list pop helpers, which can then be used with
container_of to obtain the real object. Hence, somehow obtaining the
information that the offset is 48 will work for us. Make the test more
robust by relying on verifier error string of bpf_spin_lock and remove
dependence on fragile instruction index or register number, which can be
affected by different clang versions used to build the selftests.
Fixes: 300f19dcdb ("selftests/bpf: Add BPF linked list API tests")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231020144839.2734006-1-memxor@gmail.com
This patch adds 4 subtests to demonstrate these patterns and validating
correctness.
subtest1:
1) We use task_iter to iterate all process in the system and search for the
current process with a given pid.
2) We create some threads in current process context, and use
BPF_TASK_ITER_PROC_THREADS to iterate all threads of current process. As
expected, we would find all the threads of current process.
3) We create some threads and use BPF_TASK_ITER_ALL_THREADS to iterate all
threads in the system. As expected, we would find all the threads which was
created.
subtest2:
We create a cgroup and add the current task to the cgroup. In the
BPF program, we would use bpf_for_each(css_task, task, css) to iterate all
tasks under the cgroup. As expected, we would find the current process.
subtest3:
1) We create a cgroup tree. In the BPF program, we use
bpf_for_each(css, pos, root, XXX) to iterate all descendant under the root
with pre and post order. As expected, we would find all descendant and the
last iterating cgroup in post-order is root cgroup, the first iterating
cgroup in pre-order is root cgroup.
2) We wse BPF_CGROUP_ITER_ANCESTORS_UP to traverse the cgroup tree starting
from leaf and root separately, and record the height. The diff of the
hights would be the total tree-high - 1.
subtest4:
Add some failure testcase when using css_task, task and css iters, e.g,
unlock when using task-iters to iterate tasks.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Link: https://lore.kernel.org/r/20231018061746.111364-9-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The newly-added struct bpf_iter_task has a name collision with a selftest
for the seq_file task iter's bpf skel, so the selftests/bpf/progs file is
renamed in order to avoid the collision.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231018061746.111364-8-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Expand the sockopt test to use also check for io_uring {g,s}etsockopt
commands operations.
This patch starts by marking each test if they support io_uring support
or not.
Right now, io_uring cmd getsockopt() has a limitation of only
accepting level == SOL_SOCKET, otherwise it returns -EOPNOTSUPP. Since
there aren't any test exercising getsockopt(level == SOL_SOCKET), this
patch changes two tests to use level == SOL_SOCKET, they are
"getsockopt: support smaller ctx->optlen" and "getsockopt: read
ctx->optlen".
There is no limitation for the setsockopt() part.
Later, each test runs using regular {g,s}etsockopt systemcalls, and, if
liburing is supported, execute the same test (again), but calling
liburing {g,s}setsockopt commands.
This patch also changes the level of two tests to use SOL_SOCKET for the
following two tests. This is going to help to exercise the io_uring
subsystem:
* getsockopt: read ctx->optlen
* getsockopt: support smaller ctx->optlen
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20231016134750.1381153-12-leitao@debian.org
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add several new test cases which assert corner cases on the mprog query
mechanism, for example, around passing in a too small or a larger array
than the current count.
./test_progs -t tc_opts
#252 tc_opts_after:OK
#253 tc_opts_append:OK
#254 tc_opts_basic:OK
#255 tc_opts_before:OK
#256 tc_opts_chain_classic:OK
#257 tc_opts_chain_mixed:OK
#258 tc_opts_delete_empty:OK
#259 tc_opts_demixed:OK
#260 tc_opts_detach:OK
#261 tc_opts_detach_after:OK
#262 tc_opts_detach_before:OK
#263 tc_opts_dev_cleanup:OK
#264 tc_opts_invalid:OK
#265 tc_opts_max:OK
#266 tc_opts_mixed:OK
#267 tc_opts_prepend:OK
#268 tc_opts_query:OK
#269 tc_opts_query_attach:OK
#270 tc_opts_replace:OK
#271 tc_opts_revision:OK
Summary: 20/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20231017081728.24769-1-daniel@iogearbox.net
The result is as follows:
$ tools/testing/selftests/bpf/test_progs --name=task_under_cgroup
#237 task_under_cgroup:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Without the previous patch, there will be RCU warnings in dmesg when
CONFIG_PROVE_RCU is enabled. While with the previous patch, there will
be no warnings.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20231007135945.4306-2-laoar.shao@gmail.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZS1d4wAKCRDbK58LschI
g4DSAP441CdKh8fd+wNKUSKHFbpCQ6EvocR6Nf+Sj2DFUx/w/QEA7mfju7Abqjc3
xwDEx0BuhrjMrjV5MmEpxc7lYl9XcQU=
=vuWk
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-10-16
We've added 90 non-merge commits during the last 25 day(s) which contain
a total of 120 files changed, 3519 insertions(+), 895 deletions(-).
The main changes are:
1) Add missed stats for kprobes to retrieve the number of missed kprobe
executions and subsequent executions of BPF programs, from Jiri Olsa.
2) Add cgroup BPF sockaddr hooks for unix sockets. The use case is
for systemd to reimplement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services, from Daan De Meyer.
3) Implement BPF CPUv4 support for s390x BPF JIT, from Ilya Leoshkevich.
4) Improve BPF verifier log output for scalar registers to better
disambiguate their internal state wrt defaults vs min/max values
matching, from Andrii Nakryiko.
5) Extend the BPF fib lookup helpers for IPv4/IPv6 to support retrieving
the source IP address with a new BPF_FIB_LOOKUP_SRC flag,
from Martynas Pumputis.
6) Add support for open-coded task_vma iterator to help with symbolization
for BPF-collected user stacks, from Dave Marchevsky.
7) Add libbpf getters for accessing individual BPF ring buffers which
is useful for polling them individually, for example, from Martin Kelly.
8) Extend AF_XDP selftests to validate the SHARED_UMEM feature,
from Tushar Vyavahare.
9) Improve BPF selftests cross-building support for riscv arch,
from Björn Töpel.
10) Add the ability to pin a BPF timer to the same calling CPU,
from David Vernet.
11) Fix libbpf's bpf_tracing.h macros for riscv to use the generic
implementation of PT_REGS_SYSCALL_REGS() to access syscall arguments,
from Alexandre Ghiti.
12) Extend libbpf to support symbol versioning for uprobes, from Hengqi Chen.
13) Fix bpftool's skeleton code generation to guarantee that ELF data
is 8 byte aligned, from Ian Rogers.
14) Inherit system-wide cpu_mitigations_off() setting for Spectre v1/v4
security mitigations in BPF verifier, from Yafang Shao.
15) Annotate struct bpf_stack_map with __counted_by attribute to prepare
BPF side for upcoming __counted_by compiler support, from Kees Cook.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (90 commits)
bpf: Ensure proper register state printing for cond jumps
bpf: Disambiguate SCALAR register state output in verifier logs
selftests/bpf: Make align selftests more robust
selftests/bpf: Improve missed_kprobe_recursion test robustness
selftests/bpf: Improve percpu_alloc test robustness
selftests/bpf: Add tests for open-coded task_vma iter
bpf: Introduce task_vma open-coded iterator kfuncs
selftests/bpf: Rename bpf_iter_task_vma.c to bpf_iter_task_vmas.c
bpf: Don't explicitly emit BTF for struct btf_iter_num
bpf: Change syscall_nr type to int in struct syscall_tp_t
net/bpf: Avoid unused "sin_addr_len" warning when CONFIG_CGROUP_BPF is not set
bpf: Avoid unnecessary audit log for CPU security mitigations
selftests/bpf: Add tests for cgroup unix socket address hooks
selftests/bpf: Make sure mount directory exists
documentation/bpf: Document cgroup unix socket address hooks
bpftool: Add support for cgroup unix socket address hooks
libbpf: Add support for cgroup unix socket address hooks
bpf: Implement cgroup sockaddr hooks for unix sockets
bpf: Add bpf_sock_addr_set_sun_path() to allow writing unix sockaddr from bpf
bpf: Propagate modified uaddrlen from cgroup sockaddr programs
...
====================
Link: https://lore.kernel.org/r/20231016204803.30153-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Align subtest is very specific and finicky about expected verifier log
output and format. This is often completely unnecessary as in a bunch of
situations test actually cares about var_off part of register state. But
given how exact it is right now, any tiny verifier log changes can lead
to align tests failures, requiring constant adjustment.
This patch tries to make this a bit more robust by making logic first
search for specified register and then allowing to match only portion of
register state, not everything exactly. This will come handly with
follow up changes to SCALAR register output disambiguation.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231011223728.3188086-4-andrii@kernel.org
Given missed_kprobe_recursion is non-serial and uses common testing
kfuncs to count number of recursion misses it's possible that some other
parallel test can trigger extraneous recursion misses. So we can't
expect exactly 1 miss. Relax conditions and expect at least one.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231011223728.3188086-3-andrii@kernel.org
Make these non-serial tests filter BPF programs by intended PID of
a test runner process. This makes it isolated from other parallel tests
that might interfere accidentally.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231011223728.3188086-2-andrii@kernel.org
The open-coded task_vma iter added earlier in this series allows for
natural iteration over a task's vmas using existing open-coded iter
infrastructure, specifically bpf_for_each.
This patch adds a test demonstrating this pattern and validating
correctness. The vma->vm_start and vma->vm_end addresses of the first
1000 vmas are recorded and compared to /proc/PID/maps output. As
expected, both see the same vmas and addresses - with the exception of
the [vsyscall] vma - which is explained in a comment in the prog_tests
program.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231013204426.1074286-5-davemarchevsky@fb.com
Further patches in this series will add a struct bpf_iter_task_vma,
which will result in a name collision with the selftest prog renamed in
this patch. Rename the selftest to avoid the collision.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231013204426.1074286-3-davemarchevsky@fb.com
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
kernel/bpf/verifier.c
829955981c ("bpf: Fix verifier log for async callback return values")
a923819fb2 ("bpf: Treat first argument as return value for bpf_throw")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These selftests are written in prog_tests style instead of adding
them to the existing test_sock_addr tests. Migrating the existing
sock addr tests to prog_tests style is left for future work. This
commit adds support for testing bind() sockaddr hooks, even though
there's no unix socket sockaddr hook for bind(). We leave this code
intact for when the INET and INET6 tests are migrated in the future
which do support intercepting bind().
Signed-off-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Link: https://lore.kernel.org/r/20231011185113.140426-10-daan.j.demeyer@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
These were missed when these hooks were first added so add them now
instead to make sure every sockaddr hook has a matching section name
test.
Signed-off-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Link: https://lore.kernel.org/r/20231011185113.140426-2-daan.j.demeyer@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch extends the existing fib_lookup test suite by adding two test
cases (for each IP family):
* Test source IP selection from the egressing netdev.
* Test source IP selection when an IP route has a preferred src IP addr.
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Link: https://lore.kernel.org/r/20231007081415.33502-3-m@lambda.lt
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
A previous commit updated the verifier to print an accurate failure
message for when someone specifies a nonzero return value from an async
callback. This adds a testcase for validating that the verifier emits
the correct message in such a case.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231009161414.235829-2-void@manifault.com
Now that we support pinning a BPF timer to the current core, we should
test it with some selftests. This patch adds two new testcases to the
timer suite, which verifies that a BPF timer both with and without
BPF_F_TIMER_ABS, can be pinned to the calling core with BPF_F_TIMER_CPU_PIN.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20231004162339.200702-3-void@manifault.com
Martin reported that on his local dev machine the test_tc_chain_mixed() fails as
"test_tc_chain_mixed:FAIL:seen_tc5 unexpected seen_tc5: actual 1 != expected 0"
and others occasionally, too.
However, when running in a more isolated setup (qemu in particular), it works fine
for him. The reason is that there is a small race-window where seen_tc* could turn
into true for various test cases when there is background traffic, e.g. after the
asserts they often get reset. In such case when subsequent detach takes place,
unrelated background traffic could have already flipped the bool to true beforehand.
Add a small helper tc_skel_reset_all_seen() to reset all bools before we do the ping
test. At this point, everything is set up as expected and therefore no race can occur.
All tc_{opts,links} tests continue to pass after this change.
Reported-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20231006220655.1653-7-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Simplify __assert_mprog_count() to remove the -ENOENT corner case as the
bpf_prog_query() now returns 0 when no bpf_mprog is attached. This also
allows to convert a few test cases from using raw __assert_mprog_count()
over to plain assert_mprog_count() helper.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20231006220655.1653-5-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add a new test case which performs double query of the bpf_mprog through
libbpf API, but also via raw bpf(2) syscall. This is testing to gather
first the count and then in a subsequent probe the full information with
the program array without clearing passed structs in between.
# ./vmtest.sh -- ./test_progs -t tc_opts
[...]
./test_progs -t tc_opts
[ 1.398818] tsc: Refined TSC clocksource calibration: 3407.999 MHz
[ 1.400263] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd336761, max_idle_ns: 440795243819 ns
[ 1.402734] clocksource: Switched to clocksource tsc
[ 1.426639] bpf_testmod: loading out-of-tree module taints kernel.
[ 1.428112] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
#252 tc_opts_after:OK
#253 tc_opts_append:OK
#254 tc_opts_basic:OK
#255 tc_opts_before:OK
#256 tc_opts_chain_classic:OK
#257 tc_opts_chain_mixed:OK
#258 tc_opts_delete_empty:OK
#259 tc_opts_demixed:OK
#260 tc_opts_detach:OK
#261 tc_opts_detach_after:OK
#262 tc_opts_detach_before:OK
#263 tc_opts_dev_cleanup:OK
#264 tc_opts_invalid:OK
#265 tc_opts_max:OK
#266 tc_opts_mixed:OK
#267 tc_opts_prepend:OK
#268 tc_opts_query:OK <--- (new test)
#269 tc_opts_replace:OK
#270 tc_opts_revision:OK
Summary: 19/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20231006220655.1653-4-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Extract duplicate code from these four functions
unix_redir_to_connected()
udp_redir_to_connected()
inet_unix_redir_to_connected()
unix_inet_redir_to_connected()
to generate a new helper pairs_redir_to_connected(). Create the
different socketpairs in these four functions, then pass the
socketpairs info to the new common helper to do the connections.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Link: https://lore.kernel.org/r/54bb28dcf764e7d4227ab160883931d2173f4f3d.1696588133.git.geliang.tang@suse.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Fix a bunch of potentially unitialized variable usage warnings that are
reported by GCC in -O2 mode. Also silence overzealous stringop-truncation
class of warnings.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20231006175744.3136675-1-andrii@kernel.org
Test that we can read with MSG_F_PEEK and then still get correct number
of available bytes through FIONREAD. The recv() (without PEEK) then
returns the bytes as expected. The recv() always worked though because
it was just the available byte reporting that was broke before latest
fixes.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230926035300.135096-4-john.fastabend@gmail.com
Adding selftest that puts kprobe on bpf_fentry_test1 that calls bpf_printk
and invokes bpf_trace_printk tracepoint. The bpf_trace_printk tracepoint
has test[234] programs attached to it.
Because kprobe execution goes through bpf_prog_active check, programs
attached to the tracepoint will fail the recursion check and increment the
recursion_misses stats.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Reviewed-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20230920213145.1941596-10-jolsa@kernel.org
Adding selftest that puts kprobe.multi on bpf_fentry_test1 that
calls bpf_kfunc_common_test kfunc which has 3 perf event kprobes
and 1 kprobe.multi attached.
Because fprobe (kprobe.multi attach layear) does not have strict
recursion check the kprobe's bpf_prog_active check is hit for test2-5.
Disabling this test for arm64, because there's no fprobe support yet.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Reviewed-by: Song Liu <song@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20230920213145.1941596-9-jolsa@kernel.org
Adding test that puts kprobe on bpf_fentry_test1 that calls
bpf_kfunc_common_test kfunc, which has also kprobe on.
The latter won't get triggered due to kprobe recursion check
and kprobe missed counter is incremented.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20230920213145.1941596-8-jolsa@kernel.org
This exercises the newly added dynsym symbol versioning logics.
Now we accept symbols in form of func, func@LIB_VERSION or
func@@LIB_VERSION.
The test rely on liburandom_read.so. For liburandom_read.so, we have:
$ nm -D liburandom_read.so
w __cxa_finalize@GLIBC_2.17
w __gmon_start__
w _ITM_deregisterTMCloneTable
w _ITM_registerTMCloneTable
0000000000000000 A LIBURANDOM_READ_1.0.0
0000000000000000 A LIBURANDOM_READ_2.0.0
000000000000081c T urandlib_api@@LIBURANDOM_READ_2.0.0
0000000000000814 T urandlib_api@LIBURANDOM_READ_1.0.0
0000000000000824 T urandlib_api_sameoffset@LIBURANDOM_READ_1.0.0
0000000000000824 T urandlib_api_sameoffset@@LIBURANDOM_READ_2.0.0
000000000000082c T urandlib_read_without_sema@@LIBURANDOM_READ_1.0.0
00000000000007c4 T urandlib_read_with_sema@@LIBURANDOM_READ_1.0.0
0000000000011018 D urandlib_read_with_sema_semaphore@@LIBURANDOM_READ_1.0.0
For `urandlib_api`, specifying `urandlib_api` will cause a conflict because
there are two symbols named urandlib_api and both are global bind.
For `urandlib_api_sameoffset`, there are also two symbols in the .so, but
both are at the same offset and essentially they refer to the same function
so no conflict.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230918024813.237475-4-hengqi.chen@gmail.com
Test bpf_tcp_ca (in test_progs) checks multiple tcp_congestion_ops.
However, there isn't a test that verifies functions in the
tcp_congestion_ops is actually called. Add a check to verify that
bpf_cubic_acked is actually called during the test.
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230919060258.3237176-3-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei reported seeing log messages for some test cases even though we
just wanted to match the error string from the verifier. Move the
printing of the log buffer to a guarded condition so that we only print
it when we fail to match on the expected string in the log buffer,
preventing unneeded output when running the test.
Reported-by: Alexei Starovoitov <ast@kernel.org>
Fixes: d2a93715bf ("selftests/bpf: Add tests for BPF exceptions")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230918155233.297024-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add selftests to cover success and failure cases of API usage, runtime
behavior and invariants that need to be maintained for implementation
correctness.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230912233214.1518551-18-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This test relies on bpf_testmod, so skip it if the module is not available.
Fixes: aa3d65de4b ("bpf/selftests: Test fentry attachment to shadowed functions")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230914124928.340701-1-asavkov@redhat.com
We need to deny the attach_override test for arm64, denying the
whole kprobe_multi_test suite. Also making attach_override static.
Fixes: 7182e56411 ("selftests/bpf: Add kprobe_multi override test")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230913114711.499829-1-jolsa@kernel.org
Add 4 test cases to confirm the tailcall infinite loop bug has been fixed.
Like tailcall_bpf2bpf cases, do fentry/fexit on the bpf2bpf, and then
check the final count result.
tools/testing/selftests/bpf/test_progs -t tailcalls
226/13 tailcalls/tailcall_bpf2bpf_fentry:OK
226/14 tailcalls/tailcall_bpf2bpf_fexit:OK
226/15 tailcalls/tailcall_bpf2bpf_fentry_fexit:OK
226/16 tailcalls/tailcall_bpf2bpf_fentry_entry:OK
226 tailcalls:OK
Summary: 1/16 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Leon Hwang <hffilwlqm@gmail.com>
Link: https://lore.kernel.org/r/20230912150442.2009-4-hffilwlqm@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 151e887d8f ("veth: Fixing transmit return status for dropped
packets") started propagating proper NET_XMIT_DROP error to the caller
which means it's now possible to get positive error code when calling
bpf_clone_redirect() in this particular test. Update the test to reflect
that.
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230911194731.286342-2-sdf@google.com
Add a test to test all possible and valid allocation size for bpf
memory allocator. For each possible allocation size, the test uses
the following two steps to test the alloc and free path:
1) allocate N (N > high_watermark) objects to trigger the refill
executed in irq_work.
2) free N objects to trigger the freeing executed in irq_work.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230908133923.2675053-5-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test that tries to attach program with bpf_override_return
helper to function not within error injection list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230907200652.926951-2-jolsa@kernel.org
Static ksyms often have problems because the number of symbols exceeds the
MAX_SYMS limit. Like changing the MAX_SYMS from 300000 to 400000 in
commit e76a014334a6("selftests/bpf: Bump and validate MAX_SYMS") solves
the problem somewhat, but it's not the perfect way.
This commit uses dynamic memory allocation, which completely solves the
problem caused by the limitation of the number of kallsyms. At the same
time, add APIs:
load_kallsyms_local()
ksym_search_local()
ksym_get_addr_local()
free_kallsyms_local()
There are used to solve the problem of selftests/bpf updating kallsyms
after attach new symbols during testmod testing.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/tencent_C9BDA68F9221F21BE4081566A55D66A9700A@qq.com
The test case creates 4 threads and then pins these 4 threads in CPU 0.
These 4 threads will run different bpf program through
bpf_prog_test_run_opts() and these bpf program will use bpf_obj_new()
and bpf_obj_drop() to allocate and free local kptrs concurrently.
Under preemptible kernel, bpf_obj_new() and bpf_obj_drop() may preempt
each other, bpf_obj_new() may return NULL and the test will fail before
applying these fixes as shown below:
test_preempted_bpf_ma_op:PASS:open_and_load 0 nsec
test_preempted_bpf_ma_op:PASS:attach 0 nsec
test_preempted_bpf_ma_op:PASS:no test prog 0 nsec
test_preempted_bpf_ma_op:PASS:no test prog 0 nsec
test_preempted_bpf_ma_op:PASS:no test prog 0 nsec
test_preempted_bpf_ma_op:PASS:no test prog 0 nsec
test_preempted_bpf_ma_op:PASS:pthread_create 0 nsec
test_preempted_bpf_ma_op:PASS:pthread_create 0 nsec
test_preempted_bpf_ma_op:PASS:pthread_create 0 nsec
test_preempted_bpf_ma_op:PASS:pthread_create 0 nsec
test_preempted_bpf_ma_op:PASS:run prog err 0 nsec
test_preempted_bpf_ma_op:PASS:run prog err 0 nsec
test_preempted_bpf_ma_op:PASS:run prog err 0 nsec
test_preempted_bpf_ma_op:PASS:run prog err 0 nsec
test_preempted_bpf_ma_op:FAIL:ENOMEM unexpected ENOMEM: got TRUE
#168 preempted_bpf_ma_op:FAIL
Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230901111954.1804721-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now 'BPF_MAP_TYPE_CGRP_STORAGE + local percpu ptr'
can cover all BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE functionality
and more. So mark BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE deprecated.
Also make changes in selftests/bpf/test_bpftool_synctypes.py
and selftest libbpf_str to fix otherwise test errors.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230827152837.2003563-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a few negative tests for common mistakes with using percpu kptr
including:
- store to percpu kptr.
- type mistach in bpf_kptr_xchg arguments.
- sleepable prog with untrusted arg for bpf_this_cpu_ptr().
- bpf_percpu_obj_new && bpf_obj_drop, and bpf_obj_new && bpf_percpu_obj_drop
- struct with ptr for bpf_percpu_obj_new
- struct with special field (e.g., bpf_spin_lock) for bpf_percpu_obj_new
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230827152832.2002421-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a non-sleepable cgrp_local_storage test with percpu kptr. The
test does allocation of percpu data, assigning values to percpu
data and retrieval of percpu data. The de-allocation of percpu
data is done when the map is freed.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230827152827.2001784-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add non-sleepable and sleepable tests with percpu kptr. For
non-sleepable test, four programs are executed in the order of:
1. allocate percpu data.
2. assign values to percpu data.
3. retrieve percpu data.
4. de-allocate percpu data.
The sleepable prog tried to exercise all above 4 steps in a
single prog. Also for sleepable prog, rcu_read_lock is needed
to protect direct percpu ptr access (from map value) and
following bpf_this_cpu_ptr() and bpf_per_cpu_ptr() helpers.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230827152811.2000125-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some error messages are changed due to the addition of
percpu kptr support. Fix linked_list test with changed
error messages.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230827152754.1997769-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
While commit 90f0074cd9 ("selftests/bpf: fix a CI failure caused by vsock sockmap test")
fixes a receive failure of vsock sockmap test, there is still a write failure:
Error: #211/79 sockmap_listen/sockmap VSOCK test_vsock_redir
Error: #211/79 sockmap_listen/sockmap VSOCK test_vsock_redir
./test_progs:vsock_unix_redir_connectible:1501: egress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1501
./test_progs:vsock_unix_redir_connectible:1501: ingress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1501
./test_progs:vsock_unix_redir_connectible:1501: egress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1501
The reason is that the vsock connection in the test is set to ESTABLISHED state
by function virtio_transport_recv_pkt, which is executed in a workqueue thread,
so when the user space test thread runs before the workqueue thread, this
problem occurs.
To fix it, before writing the connection, wait for it to be connected.
Fixes: d61bd8c1fd ("selftests/bpf: add a test case for vsock sockmap")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230901031037.3314007-1-xukuohai@huaweicloud.com
Recent commit [1] broke d_path test, because now filp_close is not called
directly from sys_close, but eventually later when the file is finally
released.
As suggested by Hou Tao we don't need to re-hook the bpf program, but just
instead we can use sys_close_range to trigger filp_close synchronously.
[1] 021a160abf ("fs: use __fput_sync in close(2)")
Suggested-by: Hou Tao <houtao@huaweicloud.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230831141103.359810-1-jolsa@kernel.org
Occasionally, with './test_progs -j' on my vm, I will hit the
following failure:
test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec
test_cgroup_iter_sleepable:PASS:skel_open 0 nsec
test_cgroup_iter_sleepable:PASS:skel_load 0 nsec
test_cgroup_iter_sleepable:PASS:attach_iter 0 nsec
test_cgroup_iter_sleepable:PASS:iter_create 0 nsec
test_cgroup_iter_sleepable:FAIL:cgroup_id unexpected cgroup_id: actual 1 != expected 2812
#48/5 cgrp_local_storage/cgroup_iter_sleepable:FAIL
#48 cgrp_local_storage:FAIL
Finally, I decided to do some investigation since the test is introduced
by myself. It turns out the reason is due to cgroup_fd with value 0.
In cgroup_iter, a cgroup_fd of value 0 means the root cgroup.
/* from cgroup_iter.c */
if (fd)
cgrp = cgroup_v1v2_get_from_fd(fd);
else if (id)
cgrp = cgroup_get_from_id(id);
else /* walk the entire hierarchy by default. */
cgrp = cgroup_get_from_path("/");
That is why we got cgroup_id 1 instead of expected 2812.
Why we got a cgroup_fd 0? Nobody should really touch 'stdin' (fd 0) in
test_progs. I traced 'close' syscall with stack trace and found the root
cause, which is a bug in bpf_obj_pinning.c. Basically, the code closed
fd 0 although it should not. Fixing the bug in bpf_obj_pinning.c also
resolved the above cgroup_iter_sleepable subtest failure.
Fixes: 3b22f98e5a ("selftests/bpf: Add path_fd-based BPF_OBJ_PIN and BPF_OBJ_GET tests")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230827150551.1743497-1-yonghong.song@linux.dev
Now that all reported issues are fixed, bpf_refcount_acquire can be
turned back on. Also reenable all bpf_refcount-related tests which were
disabled.
This a revert of:
* commit f3514a5d67 ("selftests/bpf: Disable newly-added 'owner' field test until refcount re-enabled")
* commit 7deca5eae8 ("bpf: Disable bpf_refcount_acquire kfunc calls until race conditions are fixed")
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230821193311.3290257-5-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For a bpf_kptr_xchg() with local kptr, if the map value kptr type and
allocated local obj type does not match, with the previous patch,
the below verifier error message will be logged:
R2 is of type <allocated local obj type> but <map value kptr type> is expected
Without the previous patch, the test will have unexpected success.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230822050058.2887354-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Attaching extra program to same functions system wide for api
and link tests.
This way we can test the pid filter works properly when there's
extra system wide consumer on the same uprobe that will trigger
the original uprobe handler.
We expect to have the same counts as before.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-29-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Running api and link tests also with pid filter and checking
the probe gets executed only for specific pid.
Spawning extra process to trigger attached uprobes and checking
we get correct counts from executed programs.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-28-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test for cookies setup/retrieval in uprobe_link uprobes
and making sure bpf_get_attach_cookie works properly.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-27-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test that attaches 50k usdt probes in usdt_multi binary.
After the attach is done we run the binary and make sure we get
proper amount of hits.
With current uprobes:
# perf stat --null ./test_progs -n 254/6
#254/6 uprobe_multi_test/bench_usdt:OK
#254 uprobe_multi_test:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Performance counter stats for './test_progs -n 254/6':
1353.659680562 seconds time elapsed
With uprobe_multi link:
# perf stat --null ./test_progs -n 254/6
#254/6 uprobe_multi_test/bench_usdt:OK
#254 uprobe_multi_test:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Performance counter stats for './test_progs -n 254/6':
0.322046364 seconds time elapsed
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-26-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test that attaches 50k uprobes in uprobe_multi binary.
After the attach is done we run the binary and make sure we
get proper amount of hits.
The resulting attach/detach times on my setup:
test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec
test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec
test_bench_attach_uprobe:PASS:uprobes_count 0 nsec
test_bench_attach_uprobe: attached in 0.346s
test_bench_attach_uprobe: detached in 0.419s
#262/5 uprobe_multi_test/bench_uprobe:OK
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-24-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding uprobe_multi test for bpf_link_create attach function.
Testing attachment using the struct bpf_link_create_opts.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-22-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding uprobe_multi test for bpf_program__attach_uprobe_multi
attach function.
Testing attachment using glob patterns and via bpf_uprobe_multi_opts
paths/syms fields.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-21-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding uprobe_multi test for skeleton load/attach functions,
to test skeleton auto attach for uprobe_multi link.
Test that bpf_get_func_ip works properly for uprobe_multi
attachment.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-20-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We'd like to have single copy of get_time_ns used b bench and test_progs,
but we can't just include bench.h, because of conflicting 'struct env'
objects.
Moving get_time_ns to testing_helpers.h which is being included by both
bench and test_progs objects.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-19-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds selftests that exercise kfunc flavor relocation
functionality added in the previous patch. The actual kfunc defined
in kernel/bpf/helpers.c is:
struct task_struct *bpf_task_acquire(struct task_struct *p)
The following relocation behaviors are checked:
struct task_struct *bpf_task_acquire___one(struct task_struct *name)
* Should succeed despite differing param name
struct task_struct *bpf_task_acquire___two(struct task_struct *p, void *ctx)
* Should fail because there is no two-param bpf_task_acquire
struct task_struct *bpf_task_acquire___three(void *ctx)
* Should fail because, despite vmlinux's bpf_task_acquire having one param,
the types don't match
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230817225353.2570845-2-davemarchevsky@fb.com
There is no lwt test case for BPF_REROUTE yet. Add test cases for both
normal and abnormal situations. The abnormal situation is set up with an
fq qdisc on the reroute target device. Without proper fixes, overflow
this qdisc queue limit (to trigger a drop) would panic the kernel.
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/62c8ddc1e924269dcf80d2e8af1a1e632cee0b3a.1692326837.git.yan@cloudflare.com
There is no lwt_xmit test case for BPF_REDIRECT yet. Add test cases for
both normal and abnormal situations. For abnormal test cases, devices
are set down or have its carrier set down. Without proper fixes,
BPF_REDIRECT to either ingress or egress of such device would panic the
kernel.
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/96bf435243641939d9c9da329fab29cb45f7df22.1692326837.git.yan@cloudflare.com
Implement a new test program mptcpify: if the family is AF_INET or
AF_INET6, the type is SOCK_STREAM, and the protocol ID is 0 or
IPPROTO_TCP, set it to IPPROTO_MPTCP. It will be hooked in
update_socket_protocol().
Extend the MPTCP test base, add a selftest test_mptcpify() for the
mptcpify case. Open and load the mptcpify test prog to mptcpify the
TCP sockets dynamically, then use start_server() and connect_to_fd()
to create a TCP socket, but actually what's created is an MPTCP
socket, which can be verified through 'getsockopt(SOL_PROTOCOL)'
and 'getsockopt(MPTCP_INFO)'.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Link: https://lore.kernel.org/r/364e72f307e7bb38382ec7442c182d76298a9c41.1692147782.git.geliang.tang@suse.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Return libbpf_get_error(), instead of -EIO, for the error from
mptcp_sock__open_and_load().
Load success means prog_fd and map_fd are always valid. So drop these
unneeded ASSERT_GE checks for them in mptcp run_test().
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Link: https://lore.kernel.org/r/db5fcb93293df9ab173edcbaf8252465b80da6f2.1692147782.git.geliang.tang@suse.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add two netns helpers for mptcp tests: create_netns() and
cleanup_netns(). Use them in test_base().
These new helpers will be re-used in the following commits
introducing new tests.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Link: https://lore.kernel.org/r/7506371fb6c417b401cc9d7365fe455754f4ba3f.1692147782.git.geliang.tang@suse.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add selftest for the fill_link_info of uprobe, kprobe and tracepoint.
The result:
$ tools/testing/selftests/bpf/test_progs --name=fill_link_info
#79/1 fill_link_info/kprobe_link_info:OK
#79/2 fill_link_info/kretprobe_link_info:OK
#79/3 fill_link_info/kprobe_invalid_ubuff:OK
#79/4 fill_link_info/tracepoint_link_info:OK
#79/5 fill_link_info/uprobe_link_info:OK
#79/6 fill_link_info/uretprobe_link_info:OK
#79/7 fill_link_info/kprobe_multi_link_info:OK
#79/8 fill_link_info/kretprobe_multi_link_info:OK
#79/9 fill_link_info/kprobe_multi_invalid_ubuff:OK
#79 fill_link_info:OK
Summary: 1/9 PASSED, 0 SKIPPED, 0 FAILED
The test case for kprobe_multi won't be run on aarch64, as it is not
supported.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230813141900.1268-3-laoar.shao@gmail.com
There is no way where topts.repeat can be set to 1 when tc_test fails.
Fix the typo where the break statement slipped by one line.
Fixes: fb66223a24 ("selftests/bpf: add test for accessing ctx from syscall program type")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/bpf/20230814031434.3077944-1-zouyipeng@huawei.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRdM/uy1Ege0+EN1fNar9k/UBDW4wUCZNRx8QAKCRBar9k/UBDW
46MBAQC3YDFsEfPzX4P7ZnlM5Lf1NynjNbso5bYW0TF/dp/Y+gD+M8wdM5Vj2Mb0
Zr56TnwCJei0kGBemiel4sStt3e4qwY=
=+0u+
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2023-08-09
We've added 19 non-merge commits during the last 6 day(s) which contain
a total of 25 files changed, 369 insertions(+), 141 deletions(-).
The main changes are:
1) Fix array-index-out-of-bounds access when detaching from an
already empty mprog entry from Daniel Borkmann.
2) Adjust bpf selftest because of a recent llvm change
related to the cpu-v4 ISA from Eduard Zingerman.
3) Add uprobe support for the bpf_get_func_ip helper from Jiri Olsa.
4) Fix a KASAN splat due to the kernel incorrectly accepted
an invalid program using the recent cpu-v4 instruction from
Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
bpf: btf: Remove two unused function declarations
bpf: lru: Remove unused declaration bpf_lru_promote()
selftests/bpf: relax expected log messages to allow emitting BPF_ST
selftests/bpf: remove duplicated functions
bpf, docs: Fix small typo and define semantics of sign extension
selftests/bpf: Add bpf_get_func_ip test for uprobe inside function
selftests/bpf: Add bpf_get_func_ip tests for uprobe on function entry
bpf: Add support for bpf_get_func_ip helper for uprobe program
selftests/bpf: Add a movsx selftest for sign-extension of R10
bpf: Fix an incorrect verification success with movsx insn
bpf, docs: Formalize type notation and function semantics in ISA standard
bpf: change bpf_alu_sign_string and bpf_movsx_string to static
libbpf: Use local includes inside the library
bpf: fix bpf_dynptr_slice() to stop return an ERR_PTR.
bpf: fix inconsistent return types of bpf_xdp_copy_buf().
selftests/bpf: fix the incorrect verification of port numbers.
selftests/bpf: Add test for detachment on empty mprog entry
bpf: Fix mprog detachment for empty mprog entry
bpf: bpf_struct_ops: Remove unnecessary initial values of variables
====================
Link: https://lore.kernel.org/r/20230810055123.109578-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test case to check whether sockmap redirection works correctly
when data length returned by stream_parser is less than skb->len.
In addition, this test checks whether strp_done is called correctly.
The reason is that we returns skb->len - 1 from the stream_parser, so
the last byte in the skb will be held by strp->skb_head. Therefore,
if strp_done is not called to free strp->skb_head, we'll get a memleak
warning.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20230804073740.194770-5-xukuohai@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
BPF CI has reported the following failure:
Error: #200/79 sockmap_listen/sockmap VSOCK test_vsock_redir
Error: #200/79 sockmap_listen/sockmap VSOCK test_vsock_redir
./test_progs:vsock_unix_redir_connectible:1506: egress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1506
./test_progs:vsock_unix_redir_connectible:1506: ingress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1506
./test_progs:vsock_unix_redir_connectible:1506: egress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1506
./test_progs:vsock_unix_redir_connectible:1514: ingress: recv() err, errno=11
vsock_unix_redir_connectible:FAIL:1514
./test_progs:vsock_unix_redir_connectible:1518: ingress: vsock socket map failed, a != b
vsock_unix_redir_connectible:FAIL:1518
./test_progs:vsock_unix_redir_connectible:1525: ingress: want pass count 1, have 0
It’s because the recv(... MSG_DONTWAIT) syscall in the test case is
called before the queued work sk_psock_backlog() in the kernel finishes
executing. So the data to be read is still queued in psock->ingress_skb
and cannot be read by the user program. Therefore, the non-blocking
recv() reads nothing and reports an EAGAIN error.
So replace recv(... MSG_DONTWAIT) with xrecv_nonblock(), which calls
select() to wait for data to be readable or timeout before calls recv().
Fixes: d61bd8c1fd ("selftests/bpf: add a test case for vsock sockmap")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20230804073740.194770-4-xukuohai@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Update [1] to LLVM BPF backend seeks to enable generation of BPF_ST
instruction when CPUv4 is selected. This affects expected log messages
for the following selftests:
- log_fixup/missing_map
- spin_lock/lock_id_mapval_preserve
- spin_lock/lock_id_innermapval_preserve
Expected messages in these tests hard-code instruction numbers for BPF
programs compiled from C. These instruction numbers change when
BPF_ST is allowed because single BPF_ST instruction replaces a pair of
BPF_MOV/BPF_STX instructions, e.g.:
r1 = 42;
*(u32 *)(r10 - 8) = r1; ---> *(u32 *)(r10 - 8) = 42;
This commit updates expected log messages to avoid matching specific
instruction numbers (program position still could be uniquely
identified).
[1] https://reviews.llvm.org/D140804
"[BPF] support for BPF_ST instruction in codegen"
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230808162755.392606-1-eddyz87@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Adding get_func_ip test for uprobe inside function that validates
the get_func_ip helper returns correct probe address value.
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230807085956.2344866-4-jolsa@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Adding get_func_ip tests for uprobe on function entry that
validates that bpf_get_func_ip returns proper values from
both uprobe and return uprobe.
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230807085956.2344866-3-jolsa@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Check port numbers before calling htons().
According to Dan Carpenter's report, Smatch identified incorrect port
number checks. It is expected that the returned port number is an integer,
with negative numbers indicating errors. However, the value was mistakenly
verified after being translated by htons().
Major changes from v1:
- Move the variable 'port' to the same line of 'err'.
Fixes: 539c7e67aa ("selftests/bpf: Verify that the cgroup_skb filters receive expected packets.")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/bpf/cafd6585-d5a2-4096-b94f-7556f5aa7737@moroto.mountain/
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20230804165831.173627-1-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add a detachment test case with miniq present to assert that with and
without the miniq we get the same error.
# ./test_progs -t tc_opts
#244 tc_opts_after:OK
#245 tc_opts_append:OK
#246 tc_opts_basic:OK
#247 tc_opts_before:OK
#248 tc_opts_chain_classic:OK
#249 tc_opts_delete_empty:OK
#250 tc_opts_demixed:OK
#251 tc_opts_detach:OK
#252 tc_opts_detach_after:OK
#253 tc_opts_detach_before:OK
#254 tc_opts_dev_cleanup:OK
#255 tc_opts_invalid:OK
#256 tc_opts_mixed:OK
#257 tc_opts_prepend:OK
#258 tc_opts_replace:OK
#259 tc_opts_revision:OK
Summary: 16/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20230804131112.11012-2-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add a test case for the tracepoint of xdp attaching failure by bpf
tracepoint when attach XDP to a device with invalid flags option.
The bpf tracepoint retrieves error message from the tracepoint, and
then put the error message to a perf buffer. The testing code receives
error message from perf buffer, and then ASSERT "Invalid XDP flags for
BPF link attachment".
Signed-off-by: Leon Hwang <hffilwlqm@gmail.com>
Link: https://lore.kernel.org/r/20230801142621.7925-3-hffilwlqm@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
These selftests tests 2 major scenarios: the BPF based defragmentation
can successfully be done and that packet pointers are invalidated after
calls to the kfunc. The logic is similar for both ipv4 and ipv6.
In the first scenario, we create a UDP client and UDP echo server. The
the server side is fairly straightforward: we attach the prog and simply
echo back the message.
The on the client side, we send fragmented packets to and expect the
reassembled message back from the server.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/33e40fdfddf43be93f2cb259303f132f46750953.1689970773.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The following ldsx cases are tested:
- signed readonly map value
- read/write map value
- probed memory
- not-narrowed ctx field access
- narrowed ctx field access.
Without previous proper verifier/git handling, the test will fail.
If cpuv4 is not supported either by compiler or by jit,
the test will be skipped.
# ./test_progs -t ldsx_insn
#113/1 ldsx_insn/map_val and probed_memory:SKIP
#113/2 ldsx_insn/ctx_member_sign_ext:SKIP
#113/3 ldsx_insn/ctx_member_narrow_sign_ext:SKIP
#113 ldsx_insn:SKIP
Summary: 1/0 PASSED, 3 SKIPPED, 0 FAILED
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230728011336.3723434-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add unit tests for new ldsx insns. The test includes sign-extension
with a single value or with a value range.
If cpuv4 is not supported due to
(1) older compiler, e.g., less than clang version 18, or
(2) test runner test_progs and test_progs-no_alu32 which tests
cpu v2 and v3, or
(3) non-x86_64 arch not supporting new insns in jit yet,
a dummy program is added with below output:
#318/1 verifier_ldsx/cpuv4 is not supported by compiler or jit, use a dummy test:OK
#318 verifier_ldsx:OK
to indicate the test passed with a dummy test instead of actually
testing cpuv4. I am using a dummy prog to avoid changing the
verifier testing infrastructure. Once clang 18 is widely available
and other architectures support cpuv4, at least for CI run,
the dummy program can be removed.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230728011304.3719139-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We use two programs to check that the new reuseport logic is executed
appropriately.
The first is a TC clsact program which bpf_sk_assigns
the skb to a UDP or TCP socket created by user space. Since the test
communicates via lo we see both directions of packets in the eBPF.
Traffic ingressing to the reuseport socket is identified by looking
at the destination port. For TCP, we additionally need to make sure
that we only assign the initial SYN packets towards our listening
socket. The network stack then creates a request socket which
transitions to ESTABLISHED after the 3WHS.
The second is a reuseport program which shares the fact that
it has been executed with user space. This tells us that the delayed
lookup mechanism is working.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: Lorenz Bauer <lmb@isovalent.com>
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Cc: Joe Stringer <joe@cilium.io>
Link: https://lore.kernel.org/r/20230720-so-reuseport-v6-8-7021b683cdae@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The test added in previous patch will fail with bpf_refcount_acquire
disabled. Until all races are fixed and bpf_refcount_acquire is
re-enabled on bpf-next, disable the test so CI doesn't complain.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230718083813.3416104-6-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds a runnable version of one of the races described by
Kumar in [0]. Specifically, this interleaving:
(rbtree1 and list head protected by lock1, rbtree2 protected by lock2)
Prog A Prog B
======================================
n = bpf_obj_new(...)
m = bpf_refcount_acquire(n)
kptr_xchg(map, m)
m = kptr_xchg(map, NULL)
lock(lock2)
bpf_rbtree_add(rbtree2, m->r, less)
unlock(lock2)
lock(lock1)
bpf_list_push_back(head, n->l)
/* make n non-owning ref */
bpf_rbtree_remove(rbtree1, n->r)
unlock(lock1)
The above interleaving, the node's struct bpf_rb_node *r can be used to
add it to either rbtree1 or rbtree2, which are protected by different
locks. If the node has been added to rbtree2, we should not be allowed
to remove it while holding rbtree1's lock.
Before changes in the previous patch in this series, the rbtree_remove
in the second part of Prog A would succeed as the verifier has no way of
knowing which tree owns a particular node at verification time. The
addition of 'owner' field results in bpf_rbtree_remove correctly
failing.
The test added in this patch splits "Prog A" above into two separate BPF
programs - A1 and A2 - and uses a second mapval + kptr_xchg to pass n
from A1 to A2 similarly to the pass from A1 to B. If the test is run
without the fix applied, the remove will succeed.
Kumar's example had the two programs running on separate CPUs. This
patch doesn't do this as it's not necessary to exercise the broken
behavior / validate fixed behavior.
[0]: https://lore.kernel.org/bpf/d7hyspcow5wtjcmw4fugdgyp3fwhljwuscp3xyut5qnwivyeru@ysdq543otzv2
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Suggested-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230718083813.3416104-5-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
As described by Kumar in [0], in shared ownership scenarios it is
necessary to do runtime tracking of {rb,list} node ownership - and
synchronize updates using this ownership information - in order to
prevent races. This patch adds an 'owner' field to struct bpf_list_node
and bpf_rb_node to implement such runtime tracking.
The owner field is a void * that describes the ownership state of a
node. It can have the following values:
NULL - the node is not owned by any data structure
BPF_PTR_POISON - the node is in the process of being added to a data
structure
ptr_to_root - the pointee is a data structure 'root'
(bpf_rb_root / bpf_list_head) which owns this node
The field is initially NULL (set by bpf_obj_init_field default behavior)
and transitions states in the following sequence:
Insertion: NULL -> BPF_PTR_POISON -> ptr_to_root
Removal: ptr_to_root -> NULL
Before a node has been successfully inserted, it is not protected by any
root's lock, and therefore two programs can attempt to add the same node
to different roots simultaneously. For this reason the intermediate
BPF_PTR_POISON state is necessary. For removal, the node is protected
by some root's lock so this intermediate hop isn't necessary.
Note that bpf_list_pop_{front,back} helpers don't need to check owner
before removing as the node-to-be-removed is not passed in as input and
is instead taken directly from the list. Do the check anyways and
WARN_ON_ONCE in this unexpected scenario.
Selftest changes in this patch are entirely mechanical: some BTF
tests have hardcoded struct sizes for structs that contain
bpf_{list,rb}_node fields, those were adjusted to account for the new
sizes. Selftest additions to validate the owner field are added in a
further patch in the series.
[0]: https://lore.kernel.org/bpf/d7hyspcow5wtjcmw4fugdgyp3fwhljwuscp3xyut5qnwivyeru@ysdq543otzv2
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Suggested-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230718083813.3416104-4-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----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=GVUB
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2023-07-13
We've added 67 non-merge commits during the last 15 day(s) which contain
a total of 106 files changed, 4444 insertions(+), 619 deletions(-).
The main changes are:
1) Fix bpftool build in presence of stale vmlinux.h,
from Alexander Lobakin.
2) Introduce bpf_me_mcache_free_rcu() and fix OOM under stress,
from Alexei Starovoitov.
3) Teach verifier actual bounds of bpf_get_smp_processor_id()
and fix perf+libbpf issue related to custom section handling,
from Andrii Nakryiko.
4) Introduce bpf map element count, from Anton Protopopov.
5) Check skb ownership against full socket, from Kui-Feng Lee.
6) Support for up to 12 arguments in BPF trampoline, from Menglong Dong.
7) Export rcu_request_urgent_qs_task, from Paul E. McKenney.
8) Fix BTF walking of unions, from Yafang Shao.
9) Extend link_info for kprobe_multi and perf_event links,
from Yafang Shao.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (67 commits)
selftests/bpf: Add selftest for PTR_UNTRUSTED
bpf: Fix an error in verifying a field in a union
selftests/bpf: Add selftests for nested_trust
bpf: Fix an error around PTR_UNTRUSTED
selftests/bpf: add testcase for TRACING with 6+ arguments
bpf, x86: allow function arguments up to 12 for TRACING
bpf, x86: save/restore regs with BPF_DW size
bpftool: Use "fallthrough;" keyword instead of comments
bpf: Add object leak check.
bpf: Convert bpf_cpumask to bpf_mem_cache_free_rcu.
bpf: Introduce bpf_mem_free_rcu() similar to kfree_rcu().
selftests/bpf: Improve test coverage of bpf_mem_alloc.
rcu: Export rcu_request_urgent_qs_task()
bpf: Allow reuse from waiting_for_gp_ttrace list.
bpf: Add a hint to allocated objects.
bpf: Change bpf_mem_cache draining process.
bpf: Further refactor alloc_bulk().
bpf: Factor out inc/dec of active flag into helpers.
bpf: Refactor alloc_bulk().
bpf: Let free_all() return the number of freed elements.
...
====================
Link: https://lore.kernel.org/r/20230714020910.80794-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add fentry_many_args.c and fexit_many_args.c to test the fentry/fexit
with 7/11 arguments. As this feature is not supported by arm64 yet, we
disable these testcases for arm64 in DENYLIST.aarch64. We can combine
them with fentry_test.c/fexit_test.c when arm64 is supported too.
Correspondingly, add bpf_testmod_fentry_test7() and
bpf_testmod_fentry_test11() to bpf_testmod.c
Meanwhile, add bpf_modify_return_test2() to test_run.c to test the
MODIFY_RETURN with 7 arguments.
Add bpf_testmod_test_struct_arg_7/bpf_testmod_test_struct_arg_7 in
bpf_testmod.c to test the struct in the arguments.
And the testcases passed on x86_64:
./test_progs -t fexit
Summary: 5/14 PASSED, 0 SKIPPED, 0 FAILED
./test_progs -t fentry
Summary: 3/2 PASSED, 0 SKIPPED, 0 FAILED
./test_progs -t modify_return
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
./test_progs -t tracing_struct
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230713040738.1789742-4-imagedong@tencent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a per-cpu array resizing use case and demonstrate how
bpf_get_smp_processor_id() can be used to directly access proper data
with no extra checks.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230711232400.1658562-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When wrapping code, use ';' better than using ',' which is more in line with
the coding habits of most engineers.
Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hou Tao <houtao1@huawei.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230707081253.34638-1-luhongfei@vivo.com
Use the bpf_timer_set_callback helper to mark timer_cb as an async
callback, and put a direct call to timer_cb in the main subprog.
As the check_stack_max_depth happens after the do_check pass, the order
does not matter. Without the previous fix, the test passes successfully.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230705144730.235802-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This test case includes four scenarios:
1. Connect to the server from outside the cgroup and close the connection
from outside the cgroup.
2. Connect to the server from outside the cgroup and close the connection
from inside the cgroup.
3. Connect to the server from inside the cgroup and close the connection
from outside the cgroup.
4. Connect to the server from inside the cgroup and close the connection
from inside the cgroup.
The test case is to verify that cgroup_skb/{egress, ingress} filters
receive expected packets including SYN, SYN/ACK, ACK, FIN, and FIN/ACK.
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230624014600.576756-3-kuifeng@meta.com
Add new bpf_fentry_test_sinfo with skb_shared_info argument and try to
access frags.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20230626212522.2414485-2-sdf@google.com
Alexei reported:
After fast forwarding bpf-next today bpf_nf test started to fail when
run twice:
$ ./test_progs -t bpf_nf
#17 bpf_nf:OK
Summary: 1/10 PASSED, 0 SKIPPED, 0 FAILED
$ ./test_progs -t bpf_nf
All error logs:
test_bpf_nf_ct:PASS:test_bpf_nf__open_and_load 0 nsec
test_bpf_nf_ct:PASS:iptables-legacy -t raw -A PREROUTING -j CONNMARK
--set-mark 42/0 0 nsec
(network_helpers.c:102: errno: Address already in use) Failed to bind socket
test_bpf_nf_ct:FAIL:start_server unexpected start_server: actual -1 < expected 0
#17/1 bpf_nf/xdp-ct:FAIL
test_bpf_nf_ct:PASS:test_bpf_nf__open_and_load 0 nsec
test_bpf_nf_ct:PASS:iptables-legacy -t raw -A PREROUTING -j CONNMARK
--set-mark 42/0 0 nsec
(network_helpers.c:102: errno: Address already in use) Failed to bind socket
test_bpf_nf_ct:FAIL:start_server unexpected start_server: actual -1 < expected 0
#17/2 bpf_nf/tc-bpf-ct:FAIL
#17 bpf_nf:FAIL
Summary: 0/8 PASSED, 0 SKIPPED, 1 FAILED
I was able to locally reproduce as well. Rearrange the connection teardown
so that the client closes its connection first so that we don't need to
linger in TCP time-wait.
Fixes: e81fbd4c1b ("selftests/bpf: Add existing connection bpf_*_ct_lookup() test")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/CAADnVQ+0dnDq_v_vH1EfkacbfGnHANaon7zsw10pMb-D9FS0Pw@mail.gmail.com
Link: https://lore.kernel.org/bpf/20230626131942.5100-1-daniel@iogearbox.net
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZJX+ygAKCRDbK58LschI
g0/2AQDHg12smf9mPfK9wOFDNRIIX8r2iufB8LUFQMzCwltN6gEAkAdkAyfbof7P
TMaNUiHABijAFtChxoSI35j3OOSRrwE=
=GJgN
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-06-23
We've added 49 non-merge commits during the last 24 day(s) which contain
a total of 70 files changed, 1935 insertions(+), 442 deletions(-).
The main changes are:
1) Extend bpf_fib_lookup helper to allow passing the route table ID,
from Louis DeLosSantos.
2) Fix regsafe() in verifier to call check_ids() for scalar registers,
from Eduard Zingerman.
3) Extend the set of cpumask kfuncs with bpf_cpumask_first_and()
and a rework of bpf_cpumask_any*() kfuncs. Additionally,
add selftests, from David Vernet.
4) Fix socket lookup BPF helpers for tc/XDP to respect VRF bindings,
from Gilad Sever.
5) Change bpf_link_put() to use workqueue unconditionally to fix it
under PREEMPT_RT, from Sebastian Andrzej Siewior.
6) Follow-ups to address issues in the bpf_refcount shared ownership
implementation, from Dave Marchevsky.
7) A few general refactorings to BPF map and program creation permissions
checks which were part of the BPF token series, from Andrii Nakryiko.
8) Various fixes for benchmark framework and add a new benchmark
for BPF memory allocator to BPF selftests, from Hou Tao.
9) Documentation improvements around iterators and trusted pointers,
from Anton Protopopov.
10) Small cleanup in verifier to improve allocated object check,
from Daniel T. Lee.
11) Improve performance of bpf_xdp_pointer() by avoiding access
to shared_info when XDP packet does not have frags,
from Jesper Dangaard Brouer.
12) Silence a harmless syzbot-reported warning in btf_type_id_size(),
from Yonghong Song.
13) Remove duplicate bpfilter_umh_cleanup in favor of umd_cleanup_helper,
from Jarkko Sakkinen.
14) Fix BPF selftests build for resolve_btfids under custom HOSTCFLAGS,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (49 commits)
bpf, docs: Document existing macros instead of deprecated
bpf, docs: BPF Iterator Document
selftests/bpf: Fix compilation failure for prog vrf_socket_lookup
selftests/bpf: Add vrf_socket_lookup tests
bpf: Fix bpf socket lookup from tc/xdp to respect socket VRF bindings
bpf: Call __bpf_sk_lookup()/__bpf_skc_lookup() directly via TC hookpoint
bpf: Factor out socket lookup functions for the TC hookpoint.
selftests/bpf: Set the default value of consumer_cnt as 0
selftests/bpf: Ensure that next_cpu() returns a valid CPU number
selftests/bpf: Output the correct error code for pthread APIs
selftests/bpf: Use producer_cnt to allocate local counter array
xsk: Remove unused inline function xsk_buff_discard()
bpf: Keep BPF_PROG_LOAD permission checks clear of validations
bpf: Centralize permissions checks for all BPF map types
bpf: Inline map creation logic in map_create() function
bpf: Move unprivileged checks into map_create() and bpf_prog_load()
bpf: Remove in_atomic() from bpf_link_put().
selftests/bpf: Verify that check_ids() is used for scalars in regsafe()
bpf: Verify scalar ids mapping in regsafe() using check_ids()
selftests/bpf: Check if mark_chain_precision() follows scalar ids
...
====================
Link: https://lore.kernel.org/r/20230623211256.8409-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Verify that socket lookup via TC/XDP with all BPF APIs is VRF aware.
Signed-off-by: Gilad Sever <gilad9366@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230621104211.301902-5-gilad9366@gmail.com
This allows to do more centralized decisions later on, and generally
makes it very explicit which maps are privileged and which are not
(e.g., LRU_HASH and LRU_PERCPU_HASH, which are privileged HASH variants,
as opposed to unprivileged HASH and HASH_PERCPU; now this is explicit
and easy to verify).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230613223533.3689589-4-andrii@kernel.org
Check __mark_chain_precision() log to verify that scalars with same
IDs are marked as precise. Use several scenarios to test that
precision marks are propagated through:
- registers of scalar type with the same ID within one state;
- registers of scalar type with the same ID cross several states;
- registers of scalar type with the same ID cross several stack frames;
- stack slot of scalar type with the same ID;
- multiple scalar IDs are tracked independently.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230613153824.3324830-3-eddyz87@gmail.com
A prior patch added a new kfunc called bpf_cpumask_first_and() which
wraps cpumask_first_and(). This patch adds a selftest to validate its
behavior.
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230610035053.117605-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
net/sched/sch_taprio.c
d636fc5dd6 ("net: sched: add rcu annotations around qdisc->qdisc_sleeping")
dced11ef84 ("net/sched: taprio: don't overwrite "sch" variable in taprio_dump_class_stats()")
net/ipv4/sysctl_net_ipv4.c
e209fee411 ("net/ipv4: ping_group_range: allow GID from 2147483648 to 4294967294")
ccce324dab ("tcp: make the first N SYN RTO backoffs linear")
https://lore.kernel.org/all/20230605100816.08d41a7b@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit f4e4534850 ("net/netlink: fix NETLINK_LIST_MEMBERSHIPS length report")
fixed NETLINK_LIST_MEMBERSHIPS length report which caused
selftest sockopt_sk failure. The failure log looks like
test_sockopt_sk:PASS:join_cgroup /sockopt_sk 0 nsec
run_test:PASS:skel_load 0 nsec
run_test:PASS:setsockopt_link 0 nsec
run_test:PASS:getsockopt_link 0 nsec
getsetsockopt:FAIL:Unexpected NETLINK_LIST_MEMBERSHIPS value unexpected Unexpected NETLINK_LIST_MEMBERSHIPS value: actual 8 != expected 4
run_test:PASS:getsetsockopt 0 nsec
#201 sockopt_sk:FAIL
In net/netlink/af_netlink.c, function netlink_getsockopt(), for NETLINK_LIST_MEMBERSHIPS,
nlk->ngroups equals to 36. Before Commit f4e4534850, the optlen is calculated as
ALIGN(nlk->ngroups / 8, sizeof(u32)) = 4
After that commit, the optlen is
ALIGN(BITS_TO_BYTES(nlk->ngroups), sizeof(u32)) = 8
Fix the test by setting the expected optlen to be 8.
Fixes: f4e4534850 ("net/netlink: fix NETLINK_LIST_MEMBERSHIPS length report")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230606172202.1606249-1-yhs@fb.com
Dan Carpenter found via Smatch static checker, that unsigned 'mtu_lo' is
never less than zero.
Variable mtu_lo should have been an 'int', because read_mtu_device_lo()
uses minus as error indications.
Fixes: b62eba5632 ("selftests/bpf: Tests using bpf_check_mtu BPF-helper")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/bpf/168605104733.3636467.17945947801753092590.stgit@firesoul
In a recent patch, we taught the verifier that trusted PTR_TO_BTF_ID can
never be NULL. This prevents the verifier from incorrectly failing to
load certain programs where it gets confused and thinks a reference
isn't dropped because it incorrectly assumes that a branch exists in
which a NULL PTR_TO_BTF_ID pointer is never released.
This patch adds a testcase that verifies this cannot happen.
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230602150112.1494194-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a selftest that accesses a BPF_MAP_TYPE_ARRAY (at a nonzero index)
nested within a BPF_MAP_TYPE_HASH_OF_MAPS to flex a previously buggy
case.
Signed-off-by: Rhys Rustad-Elliott <me@rhysre.net>
Link: https://lore.kernel.org/r/20230602190110.47068-3-me@rhysre.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add additional test cases to `fib_lookup.c` prog_test.
These test cases add a new /24 network to the previously unused veth2
device, removes the directly connected route from the main routing table
and moves it to table 100.
The first test case then confirms a fib lookup for a remote address in
this directly connected network, using the main routing table fails.
The second test case ensures the same fib lookup using table 100 succeeds.
An additional pair of tests which function in the same manner are added
for IPv6.
Signed-off-by: Louis DeLosSantos <louis.delos.devel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230505-bpf-add-tbid-fib-lookup-v2-2-0a31c22c748c@gmail.com
Add two selftests where map creation key/value type_id's are
decl_tags. Without previous patch, kernel warnings will
appear similar to the one in the previous patch. With the previous
patch, both kernel warnings are silenced.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230530205034.266643-1-yhs@fb.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZHEm+wAKCRDbK58LschI
gyIKAQCqO7B4sIu8hYVxBTwfHV2tIuXSMSCV4P9e78NUOPcO2QEAvLP/WVSjB0Bm
vpyTKKM22SpZvPe/jSp52j6t20N+qAc=
=HFxD
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-05-26
We've added 54 non-merge commits during the last 10 day(s) which contain
a total of 76 files changed, 2729 insertions(+), 1003 deletions(-).
The main changes are:
1) Add the capability to destroy sockets in BPF through a new kfunc,
from Aditi Ghag.
2) Support O_PATH fds in BPF_OBJ_PIN and BPF_OBJ_GET commands,
from Andrii Nakryiko.
3) Add capability for libbpf to resize datasec maps when backed via mmap,
from JP Kobryn.
4) Move all the test kfuncs for CI out of the kernel and into bpf_testmod,
from Jiri Olsa.
5) Big batch of xsk selftest improvements to prep for multi-buffer testing,
from Magnus Karlsson.
6) Show the target_{obj,btf}_id in tracing link's fdinfo and dump it
via bpftool, from Yafang Shao.
7) Various misc BPF selftest improvements to work with upcoming LLVM 17,
from Yonghong Song.
8) Extend bpftool to specify netdevice for resolving XDP hints,
from Larysa Zaremba.
9) Document masking in shift operations for the insn set document,
from Dave Thaler.
10) Extend BPF selftests to check xdp_feature support for bond driver,
from Lorenzo Bianconi.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits)
bpf: Fix bad unlock balance on freeze_mutex
libbpf: Ensure FD >= 3 during bpf_map__reuse_fd()
libbpf: Ensure libbpf always opens files with O_CLOEXEC
selftests/bpf: Check whether to run selftest
libbpf: Change var type in datasec resize func
bpf: drop unnecessary bpf_capable() check in BPF_MAP_FREEZE command
libbpf: Selftests for resizing datasec maps
libbpf: Add capability for resizing datasec maps
selftests/bpf: Add path_fd-based BPF_OBJ_PIN and BPF_OBJ_GET tests
libbpf: Add opts-based bpf_obj_pin() API and add support for path_fd
bpf: Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
libbpf: Start v1.3 development cycle
bpf: Validate BPF object in BPF_OBJ_PIN before calling LSM
bpftool: Specify XDP Hints ifname when loading program
selftests/bpf: Add xdp_feature selftest for bond device
selftests/bpf: Test bpf_sock_destroy
selftests/bpf: Add helper to get port using getsockname
bpf: Add bpf_sock_destroy kfunc
bpf: Add kfunc filter function to 'struct btf_kfunc_id_set'
bpf: udp: Implement batching for sockets iterator
...
====================
Link: https://lore.kernel.org/r/20230526222747.17775-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The sockopt test invokes test__start_subtest and then unconditionally
asserts the success. That means that even if deny-listed, any test will
still run and potentially fail.
Evaluate the return value of test__start_subtest() to achieve the
desired behavior, as other tests do.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230525232248.640465-1-deso@posteo.net
This patch adds test coverage for resizing datasec maps. The first two
subtests resize the bss and custom data sections. In both cases, an
initial array (of length one) has its element set to one. After resizing
the rest of the array is filled with ones as well. A BPF program is then
run to sum the respective arrays and back on the userspace side the sum
is checked to be equal to the number of elements.
The third subtest attempts to perform resizing under conditions that
will result in either the resize failing or the BTF info being cleared.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230524004537.18614-3-inwardvessel@gmail.com
Add a selftest demonstrating using detach-mounted BPF FS using new mount
APIs, and pinning and getting BPF map using such mount. This
demonstrates how something like container manager could setup BPF FS,
pin and adjust all the necessary objects in it, all before exposing BPF
FS to a particular mount namespace.
Also add a few subtests validating all meaningful combinations of
path_fd and pathname. We use mounted /sys/fs/bpf location for these.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230523170013.728457-5-andrii@kernel.org
When BPF program drops pkts the sockmap logic 'eats' the packet and
updates copied_seq. In the PASS case where the sk_buff is accepted
we update copied_seq from recvmsg path so we need a new test to
handle the drop case.
Original patch series broke this resulting in
test_sockmap_skb_verdict_fionread:PASS:ioctl(FIONREAD) error 0 nsec
test_sockmap_skb_verdict_fionread:FAIL:ioctl(FIONREAD) unexpected ioctl(FIONREAD): actual 1503041772 != expected 256
After updated patch with fix.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-14-john.fastabend@gmail.com
A bug was reported where ioctl(FIONREAD) returned zero even though the
socket with a SK_SKB verdict program attached had bytes in the msg
queue. The result is programs may hang or more likely try to recover,
but use suboptimal buffer sizes.
Add a test to check that ioctl(FIONREAD) returns the correct number of
bytes.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-13-john.fastabend@gmail.com
When session gracefully shutdowns epoll needs to wake up and any recv()
readers should return 0 not the -EAGAIN they previously returned.
Note we use epoll instead of select to test the epoll wake on shutdown
event as well.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-12-john.fastabend@gmail.com
A common operation for testing is to spin up a pair of sockets that are
connected. Then we can use these to run specific tests that need to
send data, check BPF programs and so on.
The sockmap_listen programs already have this logic lets move it into
the new sockmap_helpers header file for general use.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-11-john.fastabend@gmail.com
No functional change here we merely pull the helpers in sockmap_listen.c
into a header file so we can use these in other programs. The tests we
are about to add aren't really _listen tests so doesn't make sense
to add them here.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-10-john.fastabend@gmail.com
The test cases for destroying sockets mirror the intended usages of the
bpf_sock_destroy kfunc using iterators.
The destroy helpers set `ECONNABORTED` error code that we can validate
in the test code with client sockets. But UDP sockets have an overriding
error code from `disconnect()` called during abort, so the error code
validation is only done for TCP sockets.
The failure test cases validate that the `bpf_sock_destroy` kfunc is not
allowed from program attach types other than BPF trace iterator, and
such programs fail to load.
Signed-off-by: Aditi Ghag <aditi.ghag@isovalent.com>
Link: https://lore.kernel.org/r/20230519225157.760788-10-aditi.ghag@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Now that we have un/load_bpf_testmod helpers in testing_helpers.h,
we can use it in other tests and save some lines.
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230515133756.1658301-7-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
