2
0
mirror of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2025-09-04 20:19:47 +08:00
Commit Graph

308 Commits

Author SHA1 Message Date
Maxime Ripard
dd39d024a8
drm/vc4: hdmi: Always try to have the highest bpc
Currently we take the max_bpc property as the bpc value and do not try
anything else.

However, what the other drivers seem to be doing is that they would try
with the highest bpc allowed by the max_bpc property and the hardware
capabilities, test if it results in an acceptable configuration, and if
not decrease the bpc and try again.

Let's use the same logic.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-7-maxime@cerno.tech
2022-03-24 13:44:00 +01:00
Maxime Ripard
f785dcfc59
drm/vc4: hdmi: Take bpp into account for the scrambler
The current code only base its decision for whether the scrambler must be
enabled or not on the pixel clock of the mode, but doesn't take the bits
per color into account.

Let's leverage the new function to compute the clock rate in the
scrambler setup code.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-6-maxime@cerno.tech
2022-03-24 13:44:00 +01:00
Maxime Ripard
15a809211a
drm/vc4: hdmi: Take the sink maximum TMDS clock into account
In the function that validates that the clock isn't too high, we've only
taken our controller limitations into account so far.

However, the sink can have a limit on the maximum TMDS clock it can deal
with too which is exposed through the EDID and the drm_display_info.

Make sure we check it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-5-maxime@cerno.tech
2022-03-24 13:44:00 +01:00
Maxime Ripard
595dcf4eb8
drm/vc4: hdmi: Move clock calculation into its own function
The code to compute our clock rate for a given setup will be called in
multiple places in the next patches, so let's create a separate function
for it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-4-maxime@cerno.tech
2022-03-24 13:44:00 +01:00
Maxime Ripard
ccbf364f32
drm/vc4: hdmi: Move clock validation to its own function
Our code is doing the same clock rate validation in multiple instances.
Let's create a helper to share the rate validation.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-3-maxime@cerno.tech
2022-03-24 13:43:59 +01:00
Maxime Ripard
6135ee0770
drm/vc4: hdmi: Rename pixel_rate variable
The pixel_rate field in the vc4_hdmi_connector_state struct actually
stores the TMDS character rate, let's rename it for consistency.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-2-maxime@cerno.tech
2022-03-24 13:43:59 +01:00
Dave Airlie
6c64ae228f Linux 5.17-rc6
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmIb/PEeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGugMH/R8icwG5gOjAuxBr
 fuz9032ECVFS36Cy3ps9Eqgf5EdS4G6yz3joM4aNtp4B7e5FzI9lzBaHS8OAguNL
 y7puFtBr9CywsnniJumZzciB9pEHmF/yyEKfMlRZA3JsRfLDacFstETp+duJnXoA
 +s49IWsy1ot5zoherhDXcFLqDoFhLVU4hYwE1xpLpW/cllqmSnW8SDZMtWW1Ui/B
 Of7zqINR4zBMmRjP4ymGq/ZrPWlFyWLdtOo0xxVoAQkeMgm33kfaaeGzfyK25FqR
 JDGUZ7lkKvwz3PYh2hqJ7dc5K+vhJ18I+F1UmOiL6QAAUF/k8jq7i3Qaf6MKqh2Z
 2v+A5k0=
 =Hiar
 -----END PGP SIGNATURE-----

Backmerge tag 'v5.17-rc6' into drm-next

This backmerges v5.17-rc6 so I can merge some amdgpu and some tegra changes on top.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-02-28 14:57:14 +10:00
Dave Airlie
54f43c17d6 drm-misc-next for v5.18:
UAPI Changes:
 
 Cross-subsystem Changes:
 - Split out panel-lvds and lvds dt bindings .
 - Put yes/no on/off disabled/enabled strings in linux/string_helpers.h
   and use it in drivers and tomoyo.
 - Clarify dma_fence_chain and dma_fence_array should never include eachother.
 - Flatten chains in syncobj's.
 - Don't double add in fbdev/defio when page is already enlisted.
 - Don't sort deferred-I/O pages by default in fbdev.
 
 Core Changes:
 - Fix missing pm_runtime_put_sync in bridge.
 - Set modifier support to only linear fb modifier if drivers don't
   advertise support.
 - As a result, we remove allow_fb_modifiers.
 - Add missing clear for EDID Deep Color Modes in drm_reset_display_info.
 - Assorted documentation updates.
 - Warn once in drm_clflush if there is no arch support.
 - Add missing select for dp helper in drm_panel_edp.
 - Assorted small fixes.
 - Improve fb-helper's clipping handling.
 - Don't dump shmem mmaps in a core dump.
 - Add accounting to ttm resource manager, and use it in amdgpu.
 - Allow querying the detected eDP panel through debugfs.
 - Add helpers for xrgb8888 to 8 and 1 bits gray.
 - Improve drm's buddy allocator.
 - Add selftests for the buddy allocator.
 
 Driver Changes:
 - Add support for nomodeset to a lot of drm drivers.
 - Use drm_module_*_driver in a lot of drm drivers.
 - Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau,
   bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86.
 - Add bridge/it6505.
 - Create DP and DVI-I connectors in ast.
 - Assorted nouveau backlight fixes.
 - Rework amdgpu reset handling.
 - Add dt bindings for ingenic,jz4780-dw-hdmi.
 - Support reading edid through aux channel in ingenic.
 - Add a drm driver for Solomon SSD130x OLED displays.
 - Add simple support for sharp LQ140M1JW46.
 - Add more panels to nt35560.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAmIWLSEACgkQ/lWMcqZw
 E8OP7hAAjix94EX5fhFa7OAdqUbFtsiKhK/4zNtV9FWpFiEsDBz+dlbfDQWIx5an
 FIiiiQtSfWjpDv6pcMhoNf80w+dDbc/Cuauz6nNGO7Pkaerh2D/EPG74FD7f7nE3
 EIScVs1heYtzM9usKrFKupNYgIdgZxmeovClWuE0OTjLOes2PGvvxXK6iJqNqJMX
 VlDO5SR7GRqsDUDV6vmwl63uKL77xJXAahAXIx+BQ/1xrtEhlu6NwsgHIsmPmMSN
 YluX34zc1xD/6/uUqvEdp7u46/5/He1c5Q/ia1WV3wRxsO/eMZ+axXqCZP3XGZdt
 rMdGNtj1MWKkudYiowStWkCVSG/0fXJCFIAhvRmeZy+YqPdVlqZ2W7g4H1l9iJoo
 UVfT9cHrKoxHsukvIEckC5Ov9v1yr39Bd4wUuqaUTUSxY8VID5vjY63TsXl9Zke1
 SluTFe9qybbnRNz/hYRvwIS1eT8HvUauAfAhypGTLI5DYHTD7PawcfMJkNzCtJm4
 Ta4SC3rTpkpN+7oc8SoNgqRHQ8U9KL5oksP0wVa8vwHsMptSd3X4pUljc6TcfjLv
 GEo41D5AuJz3HRVcn9yqPbLoPE2FFB7bfwIMH77yNnoos4Izy/LGhKpN0YdImmI5
 W5XVFB0jltGSIhkzLe1mFpLrdJwdUTSUVeCK4H5PhZZQEHLkVtg=
 =HuwD
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-next-2022-02-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.18:

UAPI Changes:

Cross-subsystem Changes:
- Split out panel-lvds and lvds dt bindings .
- Put yes/no on/off disabled/enabled strings in linux/string_helpers.h
  and use it in drivers and tomoyo.
- Clarify dma_fence_chain and dma_fence_array should never include eachother.
- Flatten chains in syncobj's.
- Don't double add in fbdev/defio when page is already enlisted.
- Don't sort deferred-I/O pages by default in fbdev.

Core Changes:
- Fix missing pm_runtime_put_sync in bridge.
- Set modifier support to only linear fb modifier if drivers don't
  advertise support.
- As a result, we remove allow_fb_modifiers.
- Add missing clear for EDID Deep Color Modes in drm_reset_display_info.
- Assorted documentation updates.
- Warn once in drm_clflush if there is no arch support.
- Add missing select for dp helper in drm_panel_edp.
- Assorted small fixes.
- Improve fb-helper's clipping handling.
- Don't dump shmem mmaps in a core dump.
- Add accounting to ttm resource manager, and use it in amdgpu.
- Allow querying the detected eDP panel through debugfs.
- Add helpers for xrgb8888 to 8 and 1 bits gray.
- Improve drm's buddy allocator.
- Add selftests for the buddy allocator.

Driver Changes:
- Add support for nomodeset to a lot of drm drivers.
- Use drm_module_*_driver in a lot of drm drivers.
- Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau,
  bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86.
- Add bridge/it6505.
- Create DP and DVI-I connectors in ast.
- Assorted nouveau backlight fixes.
- Rework amdgpu reset handling.
- Add dt bindings for ingenic,jz4780-dw-hdmi.
- Support reading edid through aux channel in ingenic.
- Add a drm driver for Solomon SSD130x OLED displays.
- Add simple support for sharp LQ140M1JW46.
- Add more panels to nt35560.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/686ec871-e77f-c230-22e5-9e3bb80f064a@linux.intel.com
2022-02-25 05:50:18 +10:00
Ville Syrjälä
d8a8cf8242
drm/vc4: Use drm_mode_copy()
struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.

Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.

Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.

@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}

@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)

@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)

@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode

Cc: Emma Anholt <emma@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-18-ville.syrjala@linux.intel.com
2022-02-21 09:54:28 +01:00
Maxime Ripard
e40945ab7c
drm/vc4: hdmi: Unregister codec device on unbind
On bind we will register the HDMI codec device but we don't unregister
it on unbind, leading to a device leakage. Unregister our device at
unbind.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127111452.222002-1-maxime@cerno.tech
2022-02-17 17:27:54 +01:00
Dave Airlie
b9c7babe2c Linux 5.17-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmIJZmoeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGZdoH/04d8zUhM3Fd3ACB
 V/ONtOXmkfP2mEJSjb7cXTN1EM2SlOBdSnSsEw09FtGhjHABjOnLho4J5ixk9TH8
 zNMNI3EMksM2T9KadHwxv8Vvp1LTrWRzMbws8tOCPA0RkOpikJfClC8CzRAyidJ3
 cAbbDH/Jl1GnVZ8bpKmv2auYt+kNVGb0cwJ2W8phCwwkL7sLky5tgYeaGiJEXbJf
 Tfi/3qtFdmYjD8wtYnCfzjnB7suG5nF7rGEnxCIxNi+IA4DieUv2c1KchuoaBfT9
 df364VjKaGT3j+GB07ksQ/8mkwWiRXsCzOXAyMZSZaWjdMD4aAhCTJak5j7/TvGC
 wtgHPww=
 =/CMW
 -----END PGP SIGNATURE-----

Backmerge tag 'v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next

Daniel asked for this for some intel deps, so let's do it now.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-02-14 10:52:27 +10:00
Dave Stevenson
1d11896596
drm/vc4: hdmi: Allow DBLCLK modes even if horz timing is odd.
The 2711 pixel valve can't produce odd horizontal timings, and
checks were added to vc4_hdmi_encoder_atomic_check and
vc4_hdmi_encoder_mode_valid to filter out/block selection of
such modes.

Modes with DRM_MODE_FLAG_DBLCLK double all the horizontal timing
values before programming them into the PV. The PV values,
therefore, can not be odd, and so the modes can be supported.

Amend the filtering appropriately.

Fixes: 57fb32e632 ("drm/vc4: hdmi: Block odd horizontal timings")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127135116.298278-1-maxime@cerno.tech
2022-02-03 16:07:59 +01:00
Dave Stevenson
71702c495b
drm/vc4: hdmi: Don't try disabling SCDC on Pi0-3.
The code that set the scdc_enabled flag to ensure it was
disabled at boot time also ran on Pi0-3 where there is no
SCDC support. This lead to a warning in vc4_hdmi_encoder_post_crtc_disable
due to vc4_hdmi_disable_scrambling being called and trying to
read (and write) register HDMI_SCRAMBLER_CTL which doesn't
exist on those platforms.

Only set the flag should the interface be configured to support
more than HDMI 1.4.

Fixes: 1998646129 ("drm/vc4: hdmi: Introduce a scdc_enabled flag")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127134559.292778-1-maxime@cerno.tech
2022-02-03 16:07:59 +01:00
Dave Stevenson
3404b39919
drm/vc4: hdmi: Ensure we don't use 2711 HPD registers on Pi0-3
The existing logic was flawed in that it could try reading the
2711 specific registers for HPD on a CM1/3 where the HPD GPIO
hadn't been defined in DT.

Ensure we don't do the 2711 register read on invalid hardware,
and then

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127131754.236074-1-maxime@cerno.tech
2022-02-03 16:07:59 +01:00
Maxime Ripard
3455494614
drm/vc4: hdmi: Simplify the connector state retrieval
When we have the entire DRM state, retrieving the connector state only
requires the drm_connector pointer. Fortunately for us, we have
allocated it as a part of the vc4_hdmi structure, so we can retrieve get
a pointer by simply accessing our field in that structure.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127111404.221882-1-maxime@cerno.tech
2022-02-02 10:44:05 +01:00
Maxime Ripard
a34b14a29d
drm/vc4: hdmi: Change CSC callback prototype
In order to support the YUV output, we'll need the atomic state to know
what is the state of the associated property in the CSC setup callback.

Let's change the prototype of that callback to allow us to access it.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-11-maxime@cerno.tech
2022-01-25 10:03:25 +01:00
Maxime Ripard
2034fc12dd
drm/vc4: hdmi: Define colorspace matrices
The current CSC setup code for the BCM2711 uses a sequence of register
writes to configure the CSC depending on whether we output using a full
or limited range.

However, with the upcoming introduction of the YUV output, we're going
to add new matrices to perform the conversions, so we should switch to
something a bit more flexible that takes the matrix as an argument and
programs the CSC accordingly.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-10-maxime@cerno.tech
2022-01-25 10:03:11 +01:00
Maxime Ripard
b718d8478e
drm/vc4: hdmi: Replace CSC_CTL hardcoded value by defines
On BCM2711, the HDMI_CSC_CTL register value has been hardcoded to an
opaque value. Let's replace it with properly defined values.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-9-maxime@cerno.tech
2022-01-25 10:02:45 +01:00
Maxime Ripard
0cbb53b283
drm/vc4: hdmi: Move XBAR setup to csc_setup
On the BCM2711, the HDMI_VEC_INTERFACE_XBAR register configuration
depends on whether we're using an RGB or YUV output. Let's move that
configuration to the CSC setup.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-8-maxime@cerno.tech
2022-01-25 10:02:41 +01:00
Maxime Ripard
dccb4d74e0
drm/vc4: hdmi: Use full range helper in csc functions
The CSC callbacks takes a boolean as an argument to tell whether we're
using the full range or limited range RGB.

However, with the upcoming YUV support, the logic will be a bit more
complex. In order to address this, let's make the callbacks take the
entire mode, and call our new helper to tell whether the full or limited
range RGB should be used.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-7-maxime@cerno.tech
2022-01-25 10:02:36 +01:00
Maxime Ripard
a649cc821a
drm/vc4: hdmi: Add full range RGB helper
We're going to need to tell whether we want to run with a full or
limited range RGB output in multiple places in the code, so let's create
a helper that will return whether we need with full range or not.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-6-maxime@cerno.tech
2022-01-25 10:02:31 +01:00
Maxime Ripard
4a46e5d251
drm/edid: Rename drm_hdmi_avi_infoframe_colorspace to _colorimetry
The drm_hdmi_avi_infoframe_colorspace() function actually sets the
colorimetry and extended_colorimetry fields in the hdmi_avi_infoframe
structure with DRM_MODE_COLORIMETRY_* values.

To make things worse, the hdmi_avi_infoframe structure also has a
colorspace field used to signal whether an RGB or YUV output is being
used.

Let's remove the inconsistency and allow for the colorspace usage by
renaming the function.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-2-maxime@cerno.tech
2022-01-25 10:00:13 +01:00
Thomas Zimmermann
a713ca234e Merge drm/drm-next into drm-misc-next
Backmerging from drm/drm-next for v5.16-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2021-11-18 09:36:39 +01:00
Maxime Ripard
1998646129
drm/vc4: hdmi: Introduce a scdc_enabled flag
We currently rely on two functions, vc4_hdmi_supports_scrambling() and
vc4_hdmi_mode_needs_scrambling() to determine if we should enable and
disable the scrambler for any given mode.

Since we might need to disable the controller at boot, we also always
run vc4_hdmi_disable_scrambling() and thus call those functions without
a mode yet, which in turns need to make some special casing in order for
it to work.

Instead of duplicating the check for whether or not we need to take care
of the scrambler in both vc4_hdmi_enable_scrambling() and
vc4_hdmi_disable_scrambling(), we can do that check only when we enable
it and store whether or not it's been enabled in our private structure.

We also need to initialize that flag at true to make sure we disable the
scrambler at boot since we can't really know its state yet.

This allows to simplify a bit that part of the driver, and removes one
user of our copy of the CRTC adjusted mode outside of KMS (since
vc4_hdmi_disable_scrambling() might be called from the hotplug interrupt
handler).

It also removes our last user of the legacy encoder->crtc pointer.

Link: https://lore.kernel.org/r/20211025141113.702757-10-maxime@cerno.tech
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-11-05 12:53:30 +01:00
Maxime Ripard
ebae26d618
drm/vc4: hdmi: Introduce an output_enabled flag
We currently poke at encoder->crtc in the ALSA code path to determine
whether the HDMI output is enabled or not, and thus whether we should
allow the audio output.

However, that pointer is deprecated and shouldn't really be used by
atomic drivers anymore. Since we have the infrastructure in place now,
let's just create a flag that we toggle to report whether the controller
is currently enabled and use that instead of encoder->crtc in ALSA.

Link: https://lore.kernel.org/r/20211025141113.702757-9-maxime@cerno.tech
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-11-05 12:53:29 +01:00
Maxime Ripard
a64ff88cb5
drm/vc4: hdmi: Check the device state in prepare()
Even though we already check that the encoder->crtc pointer is there
during in startup(), which is part of the open() path in ASoC, nothing
guarantees that our encoder state won't change between the time when we
open the device and the time we prepare it.

Move the sanity checks we do in startup() to a helper and call it from
prepare().

Link: https://lore.kernel.org/r/20211025141113.702757-8-maxime@cerno.tech
Fixes: 91e99e1139 ("drm/vc4: hdmi: Register HDMI codec")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-11-05 12:53:28 +01:00
Maxime Ripard
633be8c3c0
drm/vc4: hdmi: Prevent access to crtc->state outside of KMS
Accessing the crtc->state pointer from outside the modesetting context
is not allowed. We thus need to copy whatever we need from the KMS state
to our structure in order to access it.

However, in the vc4 HDMI driver we do use that pointer in the ALSA code
path, and potentially in the hotplug interrupt handler path.

These paths both need access to the CRTC adjusted mode in order for the
proper dividers to be set for ALSA, and the scrambler state to be
reinstated properly for hotplug.

Let's copy this mode into our private encoder structure and reference it
from there when needed. Since that part is shared between KMS and other
paths, we need to protect it using our mutex.

Link: https://lore.kernel.org/all/YWgteNaNeaS9uWDe@phenom.ffwll.local/
Link: https://lore.kernel.org/r/20211025141113.702757-7-maxime@cerno.tech
Fixes: bb7d785688 ("drm/vc4: Add HDMI audio support")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-11-05 12:53:27 +01:00
Maxime Ripard
82cb88af12
drm/vc4: hdmi: Use a mutex to prevent concurrent framework access
The vc4 HDMI controller registers into the KMS, CEC and ALSA
frameworks.

However, no particular care is done to prevent the concurrent execution
of different framework hooks from happening at the same time.

In order to protect against that scenario, let's introduce a mutex that
relevant ALSA and KMS hooks will need to take to prevent concurrent
execution.

CEC is left out at the moment though, since the .get_modes and .detect
KMS hooks, when running cec_s_phys_addr_from_edid, can end up calling
CEC's .adap_enable hook. This introduces some reentrancy that isn't easy
to deal with properly.

The CEC hooks also don't share much state with the rest of the driver:
the registers are entirely separate, we don't share any variable, the
only thing that can conflict is the CEC clock divider setup that can be
affected by a mode set.

However, after discussing it, it looks like CEC should be able to
recover from this if it was to happen.

Link: https://lore.kernel.org/r/20211025141113.702757-6-maxime@cerno.tech
Fixes: bb7d785688 ("drm/vc4: Add HDMI audio support")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-11-05 12:53:25 +01:00
Maxime Ripard
81fb55e500
drm/vc4: hdmi: Add a spinlock to protect register access
The vc4 HDMI driver has multiple path shared between the CEC, ALSA and
KMS frameworks, plus two interrupt handlers (CEC and hotplug) that will
read and modify a number of registers.

Even though not bug has been reported so far, it's definitely unsafe, so
let's just add a spinlock to protect the register access of the HDMI
controller.

Link: https://lore.kernel.org/r/20211025141113.702757-5-maxime@cerno.tech
Fixes: c8b75bca92 ("drm/vc4: Add KMS support for Raspberry Pi.")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-11-05 12:53:24 +01:00
Maxime Ripard
b7551457c5
drm/vc4: hdmi: Enable the scrambler on reconnection
If we have a state already and disconnect/reconnect the display, the
SCDC messages won't be sent again since we didn't go through a disable /
enable cycle.

In order to fix this, let's call the vc4_hdmi_enable_scrambling function
in the detect callback if there is a mode and it needs the scrambler to
be enabled.

Fixes: c85695a201 ("drm/vc4: hdmi: Enable the scrambler")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20211025152903.1088803-10-maxime@cerno.tech
2021-11-04 10:37:14 +01:00
Maxime Ripard
bd43e22bf2
drm/vc4: hdmi: Raise the maximum clock rate
Now that we have the infrastructure in place, we can raise the maximum
pixel rate we can reach for HDMI0 on the BCM2711.

HDMI1 is left untouched since its pixelvalve has a smaller FIFO and
would need a clock faster than what we can provide to support the same
modes.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211025152903.1088803-9-maxime@cerno.tech
2021-11-04 10:36:26 +01:00
Maxime Ripard
e32e572325
drm/vc4: hdmi: Fix HPD GPIO detection
Prior to commit 6800234cee ("drm/vc4: hdmi: Convert to gpiod"), in the
detect hook, if we had an HPD GPIO we would only rely on it and return
whatever state it was in.

However, that commit changed that by mistake to only consider the case
where we have a GPIO and it returns a logical high, and would fall back
to the other methods otherwise.

Since we can read the EDIDs when the HPD signal is low on some displays,
we changed the detection status from disconnected to connected, and we
would ignore an HPD pulse.

Fixes: 6800234cee ("drm/vc4: hdmi: Convert to gpiod")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20211025152903.1088803-3-maxime@cerno.tech
2021-11-04 10:36:25 +01:00
Maxime Ripard
cc5f1cbbc1
drm/vc4: hdmi: Remove the DDC probing for status detection
Commit 9d44abbbb8 ("drm/vc4: Fall back to using an EDID probe in the
absence of a GPIO.") added some code to read the EDID through DDC in the
HDMI driver detect hook since the Pi3 had no HPD GPIO back then.
However, commit b1b8f45b31 ("ARM: dts: bcm2837: Add missing GPIOs of
Expander") changed that a couple of years later.

This causes an issue though since some TV (like the LG 55C8) when it
comes out of standy will deassert the HPD line, but the EDID will
remain readable.

It causes an issues nn platforms without an HPD GPIO, like the Pi4,
where the DDC probing will be our primary mean to detect a display, and
thus we will never detect the HPD pulse. This was fine before since the
pulse was small enough that we would never detect it, and we also didn't
have anything (like the scrambler) that needed to be set up in the
display.

However, now that we have both, the display during the HPD pulse will
clear its scrambler status, and since we won't detect the
disconnect/reconnect cycle we will never enable the scrambler back.

As our main reason for that DDC probing is gone, let's just remove it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20211025152903.1088803-2-maxime@cerno.tech
2021-11-04 10:35:32 +01:00
Dave Airlie
970eae1560 Linux 5.15-rc7
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmF298ceHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGIJYH/1rsEFQQ6caeQdy1
 z9eFIe48DNM4l7bFk+qEj2UAbzPdahVJ299Mg5fW0n2CDemOc9/n0b9TxQ37YObi
 mOzu0xwJVupIxkyFMPQSSc2q8aLm67NSpJy08DsmaNses5hSvu8x15RPHLQTybjt
 SwtKns+jpCq79P1GWbrB5e5UkLb0VNoxNp4L1U4pMrYGcEkJUXbaxNY2V/JcXdM7
 Vtn+qN0T/J6V6QVftv0t8Ecj3bjEnmL3kZHaTaNg3dGeKRpCGyHc5lcBQ0cNFG6t
 vjZ9VbuhBzGI3TN2tHH5hpA1UXo7HPBBCwQqxF1jeGLGHULikYwZ3TAPWqL3QZqC
 9cxr9SY=
 =p75d
 -----END PGP SIGNATURE-----

BackMerge tag 'v5.15-rc7' into drm-next

The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-28 14:59:38 +10:00
Maxime Ripard
20b0dfa86b
drm/vc4: hdmi: Make sure the device is powered with CEC
Similarly to what we encountered with the detect hook with DRM, nothing
actually prevents any of the CEC callback from being run while the HDMI
output is disabled.

However, this is an issue since any register access to the controller
when it's powered down will result in a silent hang.

Let's make sure we run the runtime_pm hooks when the CEC adapter is
opened and closed by the userspace to avoid that issue.

Fixes: 15b4511a4a ("drm/vc4: add HDMI CEC support")
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819135931.895976-6-maxime@cerno.tech
2021-10-25 15:33:41 +02:00
Maxime Ripard
724fc856c0
drm/vc4: hdmi: Split the CEC disable / enable functions in two
In order to ease further additions to the CEC enable and disable, let's
split the function into two functions, one to enable and the other to
disable.

Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819135931.895976-5-maxime@cerno.tech
2021-10-25 15:33:41 +02:00
Maxime Ripard
caa51a4c11
drm/vc4: hdmi: Rework the pre_crtc_configure error handling
Since our pre_crtc_configure hook returned void, we didn't implement a
goto-based error path handling, leading to errors like failing to put
back the device in pm_runtime in all the error paths, but also failing
to disable the pixel clock if clk_set_min_rate on the HSM clock fails.

Move to a goto-based implementation to have an easier consitency.

Fixes: 4f6e3d66ac ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Link: https://patchwork.freedesktop.org/patch/msgid/20210819135931.895976-4-maxime@cerno.tech
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-10-25 15:33:40 +02:00
Maxime Ripard
9c6e4f6ed1
drm/vc4: hdmi: Make sure the controller is powered up during bind
In the bind hook, we actually need the device to have the HSM clock
running during the final part of the display initialisation where we
reset the controller and initialise the CEC component.

Failing to do so will result in a complete, silent, hang of the CPU.

Fixes: 411efa18e4 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm")
Link: https://patchwork.freedesktop.org/patch/msgid/20210819135931.895976-3-maxime@cerno.tech
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-10-25 15:33:40 +02:00
Maxime Ripard
0f5251339e
drm/vc4: hdmi: Make sure the controller is powered in detect
If the HPD GPIO is not available and drm_probe_ddc fails, we end up
reading the HDMI_HOTPLUG register, but the controller might be powered
off resulting in a CPU hang. Make sure we have the power domain and the
HSM clock powered during the detect cycle to prevent the hang from
happening.

Fixes: 4f6e3d66ac ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-6-maxime@cerno.tech
2021-10-25 15:33:40 +02:00
Maxime Ripard
c86b412143
drm/vc4: hdmi: Move the HSM clock enable to runtime_pm
In order to access the HDMI controller, we need to make sure the HSM
clock is enabled. If we were to access it with the clock disabled, the
CPU would completely hang, resulting in an hard crash.

Since we have different code path that would require it, let's move that
clock enable / disable to runtime_pm that will take care of the
reference counting for us.

Since we also want to change the HSM clock rate and it's only valid
while the clock is disabled, we need to move the clk_set_min_rate() call
on the HSM clock above pm_runtime_get_and_sync().

Fixes: 4f6e3d66ac ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-5-maxime@cerno.tech
Link: https://lore.kernel.org/linux-arm-kernel/20210924152334.1342630-1-maxime@cerno.tech/
2021-10-25 15:33:40 +02:00
Maxime Ripard
3e85b81591
drm/vc4: hdmi: Set a default HSM rate
When the firmware doesn't setup the HSM rate (such as when booting
without an HDMI cable plugged in), its rate is 0 and thus any register
access results in a CPU stall, even though HSM is enabled.

Let's enforce a minimum rate at boot to avoid this issue.

Fixes: 4f6e3d66ac ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-4-maxime@cerno.tech
2021-10-25 15:33:40 +02:00
Dave Airlie
797d72ce8e drm-misc-next for v5.16:
UAPI Changes:
 - Allow empty drm leases for creating separate GEM namespaces.
 
 Cross-subsystem Changes:
 - Slightly rework dma_buf_poll.
 - Add dma_resv_for_each_fence_unlocked to iterate, and use it inside
   the lockless dma-resv functions.
 
 Core Changes:
 - Allow devm_drm_of_get_bridge to build without CONFIG_OF for compile testing.
 - Add more DP2 headers.
 - fix CONFIG_FB dependency in fb_helper.
 - Add DRM_FORMAT_R8 to drm_format_info, and helpers for RGB332 and RGB888.
 - Fix crash on a 0 or invalid EDID.
 
 Driver Changes:
 - Apply and revert DRM_MODESET_LOCK_ALL_BEGIN.
 - Add mode_valid to ti-sn65dsi86 bridge.
 - Support multiple syncobjs in v3d.
 - Add R8, RGB332 and RGB888 pixel formats to GUD.
 - Use devm_add_action_or_reset in dw-hdmi-cec.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAmFdfuwACgkQ/lWMcqZw
 E8OTgg/+Nmsqhj1tsbSCWF1yx81CXHVSOhExPaMl+GPs6+y+sZ+U2rN99dnbULvA
 U56eOmjc8FvgmK89BwhSYNt++QYIRRpzjBGlCYm4bwpgqFOmYsK+en35PYMwHdxM
 Ke8newhzqa6/detvjX52igddZzrBv1Cs8aXuV5rw7Dg0ivlSlQUV0MO8JYwCliWI
 arRT8bg7wzUzhyRZqwqOqKXjvRirqBlFjJmvfL0WgHevZbzYuXbn4eWCUgCVthMH
 pU9QgK6FMW912pBxVppDO2aTDmNvqwj1BsB3RFfRuqS/JJ4s/gf39JxsipnI+/qn
 kPxZVFzzonR8Nl6h9sPi1jZrcVDCBebFgyG8hSgIVb/09U7AVYomtP18VKeh8yCy
 Pp4iQINqOcyMPmXKF491LIL92dcXZAIRaRQFKc/ZSHcfIDA7ZB1+7zf1ixBjlxjP
 GqtjLbmPspI2DzBRlTFEdf58jvX70E5nFYdQyYcy3VprJHuqEgL5PKz2Xcnve6R0
 dEkGA2vMrGtb23YyjbFTNfkdvg9WYXze9HbQLt7kc8mI77TugkG0/rCcwv5pEEu3
 WSwqMeb+5H+7va4AI715MoXbxgnCba2zPTUm1s8kSqTK0Oighc/vWcnnJ4iVuEGE
 8Xt8AIIYUtccufR6ujucVUh7nju2ZOnFE7S92LybnGnByAIADfM=
 =qxpr
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-next-2021-10-06' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.16:

UAPI Changes:
- Allow empty drm leases for creating separate GEM namespaces.

Cross-subsystem Changes:
- Slightly rework dma_buf_poll.
- Add dma_resv_for_each_fence_unlocked to iterate, and use it inside
  the lockless dma-resv functions.

Core Changes:
- Allow devm_drm_of_get_bridge to build without CONFIG_OF for compile testing.
- Add more DP2 headers.
- fix CONFIG_FB dependency in fb_helper.
- Add DRM_FORMAT_R8 to drm_format_info, and helpers for RGB332 and RGB888.
- Fix crash on a 0 or invalid EDID.

Driver Changes:
- Apply and revert DRM_MODESET_LOCK_ALL_BEGIN.
- Add mode_valid to ti-sn65dsi86 bridge.
- Support multiple syncobjs in v3d.
- Add R8, RGB332 and RGB888 pixel formats to GUD.
- Use devm_add_action_or_reset in dw-hdmi-cec.

Signed-off-by: Dave Airlie <airlied@redhat.com>

# gpg: Signature made Wed 06 Oct 2021 20:48:12 AEST
# gpg:                using RSA key B97BD6A80CAC4981091AE547FE558C72A67013C3
# gpg: Good signature from "Maarten Lankhorst <maarten.lankhorst@linux.intel.com>" [expired]
# gpg:                 aka "Maarten Lankhorst <maarten@debian.org>" [expired]
# gpg:                 aka "Maarten Lankhorst <maarten.lankhorst@canonical.com>" [expired]
# gpg: Note: This key has expired!
# Primary key fingerprint: B97B D6A8 0CAC 4981 091A  E547 FE55 8C72 A670 13C3
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2602f4e9-a8ac-83f8-6c2a-39fd9ca2e1ba@linux.intel.com
2021-10-11 12:39:15 +10:00
Maxime Ripard
5e2e412d47 drm/vc4: hdmi: Remove unused struct
Commitc7d30623540b ("drm/vc4: hdmi: Remove unused struct") removed the
references to the vc4_hdmi_audio_widgets and vc4_hdmi_audio_routes
structures, but not the structures themselves resulting in two warnings.
Remove it.

Fixes: c7d3062354 ("drm/vc4: hdmi: Remove unused struct")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819140753.930751-1-maxime@cerno.tech
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-06 11:05:44 +02:00
Maxime Ripard
daf4e7d7b9
drm/vc4: hdmi: Actually check for the connector status in hotplug
The drm_helper_hpd_irq_event() documentation states that this function
is "useful for drivers which can't or don't track hotplug interrupts for
each connector." and that "Drivers which support hotplug interrupts for
each connector individually and which have a more fine-grained detect
logic should bypass this code and directly call
drm_kms_helper_hotplug_event()". This is thus what we ended-up doing.

However, what this actually means, and is further explained in the
drm_kms_helper_hotplug_event() documentation, is that
drm_kms_helper_hotplug_event() should be called by drivers that can
track the connection status change, and if it has changed we should call
that function.

This underlying expectation we failed to provide is that the caller of
drm_kms_helper_hotplug_event() should call drm_helper_probe_detect() to
probe the new status of the connector.

Since we didn't do it, it meant that even though we were sending the
notification to user-space and the DRM clients that something changed we
never probed or updated our internal connector status ourselves.

This went mostly unnoticed since the detect callback usually doesn't
have any side-effect. Also, if we were using the DRM fbdev emulation
(which is a DRM client), or any user-space application that can deal
with hotplug events, chances are they would react to the hotplug event
by probing the connector status eventually.

However, now that we have to enable the scrambler in detect() if it was
enabled it has a side effect, and an application such as Kodi or
modetest doesn't deal with hotplug events. This resulted with a black
screen when Kodi or modetest was running when a screen was disconnected
and then reconnected, or switched off and on.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914101724.266570-3-maxime@cerno.tech
2021-09-28 12:29:13 +02:00
Linus Torvalds
31ad37bd6f Revert "drm/vc4: hdmi: Remove drm_encoder->crtc usage"
This reverts commit 27da370e0f.

Sudip Mukherjee reports that this broke pulseaudio with a NULL pointer
dereference in vc4_hdmi_audio_prepare(), bisected it to this commit, and
confirmed that a revert fixed the problem.

Revert the problematic commit until fixed.

Link: https://lore.kernel.org/all/CADVatmPB9-oKd=ypvj25UYysVo6EZhQ6bCM7EvztQBMyiZfAyw@mail.gmail.com/
Link: https://lore.kernel.org/all/CADVatmN5EpRshGEPS_JozbFQRXg5w_8LFB3OMP1Ai-ghxd3w4g@mail.gmail.com/
Reported-and-tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Emma Anholt <emma@anholt.net>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-19 10:11:53 -07:00
Linus Torvalds
b1044a9b81 Revert drm/vc4 hdmi runtime PM changes
This reverts commits

  9984d6664c ("drm/vc4: hdmi: Make sure the controller is powered in detect")
  411efa18e4 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm")

as Michael Stapelberg reports that the new runtime PM changes cause his
Raspberry Pi 3 to hang on boot, probably due to interactions with other
changes in the DRM tree (because a bisect points to the merge in commit
e058a84bfd: "Merge tag 'drm-next-2021-07-01' of git://.../drm").

Revert these two commits until it's been resolved.

Link: https://lore.kernel.org/all/871r5mp7h2.fsf@midna.i-did-not-set--mail-host-address--so-tickle-me/
Reported-and-tested-by: Michael Stapelberg <michael@stapelberg.ch>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-19 10:06:46 -07:00
Jiapeng Chong
17d3d3a614
drm/vc4: hdmi: make vc4_hdmi_codec_pdata static
This symbol is not used outside of vc4_hdmi.c, so marks it static.

Fix the following sparse warning:

drivers/gpu/drm/vc4/vc4_hdmi.c:1479:25: warning: symbol
'vc4_hdmi_codec_pdata' was not declared. Should it be static?

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/1627640794-15718-1-git-send-email-jiapeng.chong@linux.alibaba.com
2021-08-18 09:37:17 +02:00
Maxime Ripard
c7d3062354
drm/vc4: hdmi: Remove unused struct
Commit 91e99e1139 ("drm/vc4: hdmi: Register HDMI codec") removed the
references to the vc4_hdmi_audio_component_drv structure, but not the
structure itself resulting in a warning. Remove it.

Fixes: 91e99e1139 ("drm/vc4: hdmi: Register HDMI codec")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707093632.1468127-2-maxime@cerno.tech
2021-07-29 10:41:16 +02:00
Maxime Ripard
f143778d90
drm/vc4: hdmi: Remove redundant variables
The vc4_hdmi_audio_prepare function and the functions it's calling have
in several occurences multiple dereferences of either the sample rate or
the number of channels.

It turns out that these variables are also passed through the hdmi codec
parameters structure. Convert all the users to use this structure, and
if it's used multiple times use a variable to store it instead of
dereferencing it every time.

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707093632.1468127-1-maxime@cerno.tech
2021-07-29 10:41:16 +02:00
Dave Airlie
35482f9dc5 Linux 5.14-rc3
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmD95yIeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGqp0H/j/xHL20EHaUJOaV
 iJjnfGyjtnkLC5FCoV/q/v9sFuSW2p4W1nyF8/eIgVKObef94Mg4/xxaHQrWIM56
 cbzK9aIcD9InAuImJ6lju4fqjNmFrt2x7mhfzjPKqmhfINfZ5CohpLFN5XdOwzYC
 l+ZgmUUl7GLDAND2M6rtkc7AOk4qTyAySDvvPFELE/uNgV4EKaENSIWofHhEzW5v
 Yk+4agawaFTfa6H9+uMVYZBOcEKwheQ0E2tcOJvHJT8Mwm8MFoC/B7fLY5zxIdN2
 7A7r/7qbSQmSDSjOgwKS4ZOjom0xGSD+V+596SzET6jkbahR2HJ/mrFvmD7GNEoW
 OWJPjzI=
 =vzIM
 -----END PGP SIGNATURE-----

Backmerge tag 'v5.14-rc3' into drm-next

Linux 5.14-rc3

Daniel said we should pull the nouveau fix from fixes in here, probably
a good plan.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-07-26 09:27:59 +10:00
Dave Airlie
588b3eee52 drm-misc-next for v5.15:
UAPI Changes:
 
 Cross-subsystem Changes:
 - udmabuf: Add support for mapping hugepages
 - Add dma-buf stats to sysfs.
 - Assorted fixes to fbdev/omap2.
 - dma-buf: Document DMA_BUF_IOCTL_SYNC
 - Improve dma-buf non-dynamic exporter expectations better.
 - Add module parameters for dma-buf size and list limit.
 - Add HDMI codec support to vc4, to replace vc4's own codec.
 - Document dma-buf implicit fencing rules.
 - dma_resv_test_signaled test_all handling.
 
 Core Changes:
 - Extract i915's eDP backlight code into DRM helpers.
 - Assorted docbook updates.
 - Rework drm_dp_aux documentation.
 - Add support for the DP aux bus.
 - Shrink dma-fence-chain slightly.
 - Add alloc/free helpers for dma-fence-chain.
 - Assorted fixes to TTM., drm/of, bridge
 - drm_gem_plane_helper_prepare/cleanup_fb is now the default for gem drivers.
 - Small fix for scheduler completion.
 - Remove use of drm_device.irq_enabled.
 - Print the driver name to dmesg when registering framebuffer.
 - Export drm/gem's shadow plane handling, and use it in vkms.
 - Assorted small fixes.
 
 Driver Changes:
 - Add eDP backlight to nouveau.
 - Assorted fixes and cleanups to nouveau, panfrost, vmwgfx, anx7625,
   amdgpu, gma500, radeon, mgag200, vgem, vc4, vkms, omapdrm.
 - Add support for Samsung DB7430, Samsung ATNA33XC20, EDT ETMV570G2DHU,
   EDT ETM0350G0DH6, Innolux EJ030NA panels.
 - Fix some simple pannels missing bus_format and connector types.
 - Add mks-guest-stats instrumentation support to vmwgfx.
 - Merge i915-ttm topic branch.
 - Make s6e63m0 panel use Mipi-DBI helpers.
 - Add detect() supoprt for AST.
 - Use interrupts for hotplug on vc4.
 - vmwgfx is now moved to drm-misc-next, as sroland is no longer a maintainer for now.
 - vmwgfx now uses copies of vmware's internal device headers.
 - Slowly convert ti-sn65dsi83 over to atomic.
 - Rework amdgpu dma-resv handling.
 - Fix virtio fencing for planes.
 - Ensure amdgpu can always evict to SYSTEM.
 - Many drivers fixed for implicit fencing rules.
 - Set default prepare/cleanup fb for tiny, vram and simple helpers too.
 - Rework panfrost gpu reset and related serialization.
 - Update VKMS todo list.
 - Make bochs a tiny gpu driver, and use vram helper.
 - Use linux irq interfaces instead of drm_irq in some drivers.
 - Add support for Raspberry Pi Pico to GUD.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAmDxaBwACgkQ/lWMcqZw
 E8PBYRAAsZgmuQU1urEsDTL931jWoJ8zxHpxSLow8ZtplembyhloGeRXRmGT8erd
 ocw1wAzm0UajbFLvv50XW5N4jPnsn9IBRQVhfNNc06g4OH6qy17PPAA+clHaBJrf
 BFiAcK4rzmUet3+6335ko/OvkD5er0s7ipNljxgB7FkIwP3gh3NEFG0yFcpFpxF4
 fzT5Wz5vMW++XUCXZHMX+vBMjFP2AosxLVvsnxpM/48dyFWTiYRg7jhy5bICKYBM
 3GdRj2e1wm3cAsZISbqtDpXSlstIw6u0w+BB6ryQvD/K5nPTqydE/YMOB85DUWLg
 Sp1tijxM/KtOyC5w/IpDLkf9X24KAIcu0eKffUGbkLvIkP5cSyibelOtZBG6Jmln
 AubXpgi4+mGVyYvMEVngHyrY2tW/rtpNGr/g9To9hYVHKkdRZUtolQk7KgtdV7v3
 pFq60AilYTENJthkjCRoTi66BsocpaJfQOyppp6uD8/a0Spxfrq5tM+POWNylqxB
 70L2ObvM4Xx51GI0ziCZQwkMp2Uzwosr+6CdbrzQKaxxpbQEcr3frkv6cap5V0WY
 lnYgFw3dbA/Ga6YsnInQ87KmF4svnaWB2z/KzfnBF5pNrwoR9/4K5k7Vfb3P9YyN
 w+nrfeHto0r768PjC/05uyD9diDuHOw3RHtljf/C4klBNRDDovU=
 =x8Eo
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-next-2021-07-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.15:

UAPI Changes:

Cross-subsystem Changes:
- udmabuf: Add support for mapping hugepages
- Add dma-buf stats to sysfs.
- Assorted fixes to fbdev/omap2.
- dma-buf: Document DMA_BUF_IOCTL_SYNC
- Improve dma-buf non-dynamic exporter expectations better.
- Add module parameters for dma-buf size and list limit.
- Add HDMI codec support to vc4, to replace vc4's own codec.
- Document dma-buf implicit fencing rules.
- dma_resv_test_signaled test_all handling.

Core Changes:
- Extract i915's eDP backlight code into DRM helpers.
- Assorted docbook updates.
- Rework drm_dp_aux documentation.
- Add support for the DP aux bus.
- Shrink dma-fence-chain slightly.
- Add alloc/free helpers for dma-fence-chain.
- Assorted fixes to TTM., drm/of, bridge
- drm_gem_plane_helper_prepare/cleanup_fb is now the default for gem drivers.
- Small fix for scheduler completion.
- Remove use of drm_device.irq_enabled.
- Print the driver name to dmesg when registering framebuffer.
- Export drm/gem's shadow plane handling, and use it in vkms.
- Assorted small fixes.

Driver Changes:
- Add eDP backlight to nouveau.
- Assorted fixes and cleanups to nouveau, panfrost, vmwgfx, anx7625,
  amdgpu, gma500, radeon, mgag200, vgem, vc4, vkms, omapdrm.
- Add support for Samsung DB7430, Samsung ATNA33XC20, EDT ETMV570G2DHU,
  EDT ETM0350G0DH6, Innolux EJ030NA panels.
- Fix some simple pannels missing bus_format and connector types.
- Add mks-guest-stats instrumentation support to vmwgfx.
- Merge i915-ttm topic branch.
- Make s6e63m0 panel use Mipi-DBI helpers.
- Add detect() supoprt for AST.
- Use interrupts for hotplug on vc4.
- vmwgfx is now moved to drm-misc-next, as sroland is no longer a maintainer for now.
- vmwgfx now uses copies of vmware's internal device headers.
- Slowly convert ti-sn65dsi83 over to atomic.
- Rework amdgpu dma-resv handling.
- Fix virtio fencing for planes.
- Ensure amdgpu can always evict to SYSTEM.
- Many drivers fixed for implicit fencing rules.
- Set default prepare/cleanup fb for tiny, vram and simple helpers too.
- Rework panfrost gpu reset and related serialization.
- Update VKMS todo list.
- Make bochs a tiny gpu driver, and use vram helper.
- Use linux irq interfaces instead of drm_irq in some drivers.
- Add support for Raspberry Pi Pico to GUD.

Signed-off-by: Dave Airlie <airlied@redhat.com>

# gpg: Signature made Fri 16 Jul 2021 21:06:04 AEST
# gpg:                using RSA key B97BD6A80CAC4981091AE547FE558C72A67013C3
# gpg: Good signature from "Maarten Lankhorst <maarten.lankhorst@linux.intel.com>" [expired]
# gpg:                 aka "Maarten Lankhorst <maarten@debian.org>" [expired]
# gpg:                 aka "Maarten Lankhorst <maarten.lankhorst@canonical.com>" [expired]
# gpg: Note: This key has expired!
# Primary key fingerprint: B97B D6A8 0CAC 4981 091A  E547 FE55 8C72 A670 13C3
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/444811c3-cbec-e9d5-9a6b-9632eda7962a@linux.intel.com
2021-07-21 11:58:28 +10:00
Maxime Ripard
27da370e0f
drm/vc4: hdmi: Remove drm_encoder->crtc usage
The drm_encoder crtc pointer isn't really fit for an atomic driver,
let's rely on the connector state instead.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707141930.1811128-1-maxime@cerno.tech
2021-07-15 11:08:25 +02:00
Maxime Ripard
44fe9f90eb
drm/vc4: hdmi: Only call into DRM framework if registered
Our hotplug handler will currently call the drm_kms_helper_hotplug_event
every time a hotplug interrupt is called.

However, since the device is registered after all the drivers have
finished their bind callback, we have a window between when we install
our interrupt handler and when drm_dev_register() is eventually called
where our handler can run and call drm_kms_helper_hotplug_event but the
device hasn't been registered yet, causing a null pointer dereference.

Fix this by making sure we only call drm_kms_helper_hotplug_event if our
device has been properly registered.

Fixes: f4790083c7 ("drm/vc4: hdmi: Rely on interrupts to handle hotplug")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707095112.1469670-4-maxime@cerno.tech
2021-07-15 10:50:09 +02:00
Maxime Ripard
776efe800f
drm/vc4: hdmi: Drop devm interrupt handler for hotplug interrupts
The hotplugs interrupt handlers are registered through the
devm_request_threaded_irq function. However, while free_irq is indeed
called properly when the device is unbound or bind fails, it's called
after unbind or bind is done.

In our particular case, it means that on failure it creates a window
where our interrupt handler can be called, but we're freeing every
resource (CEC adapter, DRM objects, etc.) it might need.

In order to address this, let's switch to the non-devm variant to
control better when the handler will be unregistered and allow us to
make it safe.

Fixes: f4790083c7 ("drm/vc4: hdmi: Rely on interrupts to handle hotplug")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707095112.1469670-3-maxime@cerno.tech
2021-07-15 10:50:05 +02:00
Maxime Ripard
32a19de21a
drm/vc4: hdmi: Drop devm interrupt handler for CEC interrupts
The CEC interrupt handlers are registered through the
devm_request_threaded_irq function. However, while free_irq is indeed
called properly when the device is unbound or bind fails, it's called
after unbind or bind is done.

In our particular case, it means that on failure it creates a window
where our interrupt handler can be called, but we're freeing every
resource (CEC adapter, DRM objects, etc.) it might need.

In order to address this, let's switch to the non-devm variant to
control better when the handler will be unregistered and allow us to
make it safe.

Fixes: 15b4511a4a ("drm/vc4: add HDMI CEC support")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707095112.1469670-2-maxime@cerno.tech
2021-07-15 10:43:20 +02:00
Tim Gover
0b066a6809
drm: vc4: Fix pixel-wrap issue with DVP teardown
Adjust the DVP enable/disable sequence to avoid a pixel getting stuck
in an internal, non resettable FIFO within PixelValve when changing
HDMI resolution.

The blank pixels features of the DVP can prevent signals back to
pixelvalve causing it to not clear the FIFO. Adjust the ordering
and timing of operations to ensure the clear signal makes it through to
pixelvalve.

Signed-off-by: Tim Gover <tim.gover@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210628130533.144617-1-maxime@cerno.tech
2021-07-06 11:24:56 +02:00
Nicolas Saenz Julienne
9d9fb756b5
drm/vc4: hdmi: Limit noise when deferring snd card registration
We don't want to print an error message each time
devm_snd_soc_register_card() returns -EPROBE_DEFER, the function will
most likely succeed some time in the future, once the missing resources
are available. So use dev_err_probe(), which will redirect the messages
to the debug log level in such case.

Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210629121723.11523-1-nsaenzju@redhat.com
2021-07-06 11:15:21 +02:00
Linus Torvalds
e058a84bfd drm pull for 5.14-rc1
core:
 - mark AGP ioctls as legacy
 - disable force probing for non-master clients
 - HDR metadata property helpers
 - HDMI infoframe signal colorimetry support
 - remove drm_device.pdev pointer
 - remove DRM_KMS_FB_HELPER config option
 - remove drm_pci_alloc/free
 - drm_err_*/drm_dbg_* helpers
 - use drm driver names for fbdev
 - leaked DMA handle fix
 - 16bpc fixed point format fourcc
 - add prefetching memcpy for WC
 - Documentation fixes
 
 aperture:
 - add aperture ownership helpers
 
 dp:
 - aux fixes
 - downstream 0 port handling
 - use extended base receiver capability DPCD
 - Rename DP_PSR_SELECTIVE_UPDATE to better mach eDP spec
 - mst: use khz as link rate during init
 - VCPI fixes for StarTech hub
 
 ttm:
 - provide tt_shrink file via debugfs
 - warn about freeing pinned BOs
 - fix swapping error handling
 - move page alignment into BO
 - cleanup ttm_agp_backend
 - add ttm_sys_manager
 - don't override vm_ops
 - ttm_bo_mmap removed
 - make ttm_resource base of all managers
 - remove VM_MIXEDMAP usage
 
 panel:
 - sysfs_emit support
 - simple: runtime PM support
 - simple: power up panel when reading EDID + caching
 
 bridge:
 - MHDP8546: HDCP support + DT bindings
 - MHDP8546: Register DP AUX channel with userspace
 - TI SN65DSI83 + SN65DSI84: add driver
 - Sil8620: Fix module dependencies
 - dw-hdmi: make CEC driver loading optional
 - Ti-sn65dsi86: refclk fixes, subdrivers, runtime pm
 - It66121: Add driver + DT bindings
 - Adv7511: Support I2S IEC958 encoding
 - Anx7625: fix power-on delay
 - Nwi-dsi: Modesetting fixes; Cleanups
 - lt6911: add missing MODULE_DEVICE_TABLE
 - cdns: fix PM reference leak
 
 hyperv:
 - add new DRM driver for HyperV graphics
 
 efifb:
 - non-PCI device handling fixes
 
 i915:
 - refactor IP/device versioning
 - XeLPD Display IP preperation work
 - ADL-P enablement patches
 - DG1 uAPI behind BROKEN
 - disable mmap ioctl for discerte GPUs
 - start enabling HuC loading for Gen12+
 - major GuC backend rework for new platforms
 - initial TTM support for Discrete GPUs
 - locking rework for TTM prep
 - use correct max source link rate for eDP
 - %p4cc format printing
 - GLK display fixes
 - VLV DSI panel power fixes
 - PSR2 disabled for RKL and ADL-S
 - ACPI _DSM invalid access fixed
 - DMC FW path abstraction
 - ADL-S PCI ID update
 - uAPI headers converted to kerneldoc
 - initial LMEM support for DG1
 - x86/gpu: add Jasperlake to gen11 early quirks
 
 amdgpu:
 - Aldebaran updates + initial SR-IOV
 - new GPU: Beige Goby and Yellow Carp support
 - more LTTPR display work
 - Vangogh updates
 - SDMA 5.x GCR fixes
 - PCIe ASPM support
 - Renoir TMZ enablement
 - initial multiple eDP panel support
 - use fdinfo to track devices/process info
 - pin/unpin TTM fixes
 - free resource on fence usage query
 - fix fence calculation
 - fix hotunplug/suspend issues
 - GC/MM register access macro cleanup for SR-IOV
 - W=1 fixes
 - ACPI ATCS/ATIF handling rework
 - 16bpc fixed point format support
 - Initial smartshift support
 - RV/PCO power tuning fixes
 - new INFO query for additional vbios info
 
 amdkfd:
 - SR-IOV aldebaran support
 - HMM SVM support
 
 radeon:
 - SMU regression fixes
 - Oland flickering fix
 
 vmwgfx:
 - enable console with fbdev emulation
 - fix cpu updates of coherent multisample surfaces
 - remove reservation semaphore
 - add initial SVGA3 support
 - support arm64
 
 msm:
 - devcoredump support for display errors
 - dpu/dsi: yaml bindings conversion
 - mdp5: alpha/blend_mode/zpos support
 - a6xx: cached coherent buffer support
 - gpu iova fault improvement
 - a660 support
 
 rockchip:
 - RK3036 win1 scaling support
 - RK3066/3188 missing register support
 - RK3036/3066/3126/3188 alpha support
 
 mediatek:
 - MT8167 HDMI support
 - MT8183 DPI dual edge support
 
 tegra:
 - fixed YUV support/scaling on Tegra186+
 
 ast:
 - use pcim_iomap
 - fix DP501 EDID
 
 bochs:
 - screen blanking support
 
 etnaviv:
 - export more GPU ID values to userspace
 - add HWDB entry for GPU on i.MX8MP
 - rework linear window calcs
 
 exynos:
 - pm runtime changes
 
 imx:
 - Annotate dma_fence critical section
 - fix PRG modifiers after drmm conversion
 - Add 8 pixel alignment fix for 1366x768
 - fix YUV advertising
 - add color properties
 
 ingenic:
 - IPU planes fix
 
 panfrost:
 - Mediatek MT8183 support + DT bindings
 - export AFBC_FEATURES register to userspace
 
 simpledrm:
 - %pr for printing resources
 
 nouveau:
 - pin/unpin TTM fixes
 
 qxl:
 - unpin shadow BO
 
 virtio:
 - create dumb BOs as guest blob
 
 vkms:
 - drmm_universal_plane_alloc
 - add XRGB plane composition
 - overlay support
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmDdQzkACgkQDHTzWXnE
 hr7bhQ//aSYnp1To3tvPtwQ2H88RTnEbUd+nCi3C03QdLAbHC9dYHVdWuNPw2doh
 aiJO2JyQoqXVo95Jc39qkmpvm1lLDNQuufBweCHxbbpl8wYIUjfkIYq+fnZbWPaA
 aRVSOLE/4DIcgJTimsgOssAOK9klk/WYT9EV7CNIBA/b0R6f9iTUoBxCALDvMeVx
 Pt3Rnfsg3+u8msqBkkpkvFLZRS8lkXx6eZ0LEhUfRsfMcKo5L80cOHgvIhrh9+fN
 yBFv+u7jM3fOxyUYEoBeVY8UqTLfbgM+vdiP9pmiGn66yCZVJWIxCe1Mijk6K143
 f4OxJy1jJAGzo/knLCuCb21qbzyImQzkold9V+h8KAvTXGeMPISjbpLbwGeo8rne
 lfTAisGnu8q3xvYAU9znx9DkFQULgUuWahEYY3jX0ApVCR76hiT6H7AR9EOMhvKY
 PD1n39Bf62p7zK5QQ+XUOiX3PGv8J6Hw/wykFy+AIg4YgT/oK+QJul820MjZiYyt
 7Kt09Ibj4JO+vubxqlbJVsW3xtdg/Oz3BRMIdHs+2l/s0pSwBZa+qTcXhPGZxB5B
 HiyHiUgLsK8MQ0aIw9IK8+nJH8M60t6A179BbmVWxhYpGLH2Wvq0Vxgsedt9trHn
 2RN3mHlpXHSaZJbIbPcvuOewBLKA6K94o2ZZ8xqZbDcCjjC60ts=
 =fFet
 -----END PGP SIGNATURE-----

Merge tag 'drm-next-2021-07-01' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "Highlights:

   - AMD enables two more GPUs, with resulting header files

   - i915 has started to move to TTM for discrete GPU and enable DG1
     discrete GPU support (not by default yet)

   - new HyperV drm driver

   - vmwgfx adds arm64 support

   - TTM refactoring ongoing

   - 16bpc display support for AMD hw

  Otherwise it's just the usual insane amounts of work all over the
  place in lots of drivers and the core, as mostly summarised below:

  Core:
   - mark AGP ioctls as legacy
   - disable force probing for non-master clients
   - HDR metadata property helpers
   - HDMI infoframe signal colorimetry support
   - remove drm_device.pdev pointer
   - remove DRM_KMS_FB_HELPER config option
   - remove drm_pci_alloc/free
   - drm_err_*/drm_dbg_* helpers
   - use drm driver names for fbdev
   - leaked DMA handle fix
   - 16bpc fixed point format fourcc
   - add prefetching memcpy for WC
   - Documentation fixes

  aperture:
   - add aperture ownership helpers

  dp:
   - aux fixes
   - downstream 0 port handling
   - use extended base receiver capability DPCD
   - Rename DP_PSR_SELECTIVE_UPDATE to better mach eDP spec
   - mst: use khz as link rate during init
   - VCPI fixes for StarTech hub

  ttm:
   - provide tt_shrink file via debugfs
   - warn about freeing pinned BOs
   - fix swapping error handling
   - move page alignment into BO
   - cleanup ttm_agp_backend
   - add ttm_sys_manager
   - don't override vm_ops
   - ttm_bo_mmap removed
   - make ttm_resource base of all managers
   - remove VM_MIXEDMAP usage

  panel:
   - sysfs_emit support
   - simple: runtime PM support
   - simple: power up panel when reading EDID + caching

  bridge:
   - MHDP8546: HDCP support + DT bindings
   - MHDP8546: Register DP AUX channel with userspace
   - TI SN65DSI83 + SN65DSI84: add driver
   - Sil8620: Fix module dependencies
   - dw-hdmi: make CEC driver loading optional
   - Ti-sn65dsi86: refclk fixes, subdrivers, runtime pm
   - It66121: Add driver + DT bindings
   - Adv7511: Support I2S IEC958 encoding
   - Anx7625: fix power-on delay
   - Nwi-dsi: Modesetting fixes; Cleanups
   - lt6911: add missing MODULE_DEVICE_TABLE
   - cdns: fix PM reference leak

  hyperv:
   - add new DRM driver for HyperV graphics

  efifb:
   - non-PCI device handling fixes

  i915:
   - refactor IP/device versioning
   - XeLPD Display IP preperation work
   - ADL-P enablement patches
   - DG1 uAPI behind BROKEN
   - disable mmap ioctl for discerte GPUs
   - start enabling HuC loading for Gen12+
   - major GuC backend rework for new platforms
   - initial TTM support for Discrete GPUs
   - locking rework for TTM prep
   - use correct max source link rate for eDP
   - %p4cc format printing
   - GLK display fixes
   - VLV DSI panel power fixes
   - PSR2 disabled for RKL and ADL-S
   - ACPI _DSM invalid access fixed
   - DMC FW path abstraction
   - ADL-S PCI ID update
   - uAPI headers converted to kerneldoc
   - initial LMEM support for DG1
   - x86/gpu: add Jasperlake to gen11 early quirks

  amdgpu:
   - Aldebaran updates + initial SR-IOV
   - new GPU: Beige Goby and Yellow Carp support
   - more LTTPR display work
   - Vangogh updates
   - SDMA 5.x GCR fixes
   - PCIe ASPM support
   - Renoir TMZ enablement
   - initial multiple eDP panel support
   - use fdinfo to track devices/process info
   - pin/unpin TTM fixes
   - free resource on fence usage query
   - fix fence calculation
   - fix hotunplug/suspend issues
   - GC/MM register access macro cleanup for SR-IOV
   - W=1 fixes
   - ACPI ATCS/ATIF handling rework
   - 16bpc fixed point format support
   - Initial smartshift support
   - RV/PCO power tuning fixes
   - new INFO query for additional vbios info

  amdkfd:
   - SR-IOV aldebaran support
   - HMM SVM support

  radeon:
   - SMU regression fixes
   - Oland flickering fix

  vmwgfx:
   - enable console with fbdev emulation
   - fix cpu updates of coherent multisample surfaces
   - remove reservation semaphore
   - add initial SVGA3 support
   - support arm64

  msm:
   - devcoredump support for display errors
   - dpu/dsi: yaml bindings conversion
   - mdp5: alpha/blend_mode/zpos support
   - a6xx: cached coherent buffer support
   - gpu iova fault improvement
   - a660 support

  rockchip:
   - RK3036 win1 scaling support
   - RK3066/3188 missing register support
   - RK3036/3066/3126/3188 alpha support

  mediatek:
   - MT8167 HDMI support
   - MT8183 DPI dual edge support

  tegra:
   - fixed YUV support/scaling on Tegra186+

  ast:
   - use pcim_iomap
   - fix DP501 EDID

  bochs:
   - screen blanking support

  etnaviv:
   - export more GPU ID values to userspace
   - add HWDB entry for GPU on i.MX8MP
   - rework linear window calcs

  exynos:
   - pm runtime changes

  imx:
   - Annotate dma_fence critical section
   - fix PRG modifiers after drmm conversion
   - Add 8 pixel alignment fix for 1366x768
   - fix YUV advertising
   - add color properties

  ingenic:
   - IPU planes fix

  panfrost:
   - Mediatek MT8183 support + DT bindings
   - export AFBC_FEATURES register to userspace

  simpledrm:
   - %pr for printing resources

  nouveau:
   - pin/unpin TTM fixes

  qxl:
   - unpin shadow BO

  virtio:
   - create dumb BOs as guest blob

  vkms:
   - drmm_universal_plane_alloc
   - add XRGB plane composition
   - overlay support"

* tag 'drm-next-2021-07-01' of git://anongit.freedesktop.org/drm/drm: (1570 commits)
  drm/i915: Reinstate the mmap ioctl for some platforms
  drm/i915/dsc: abstract helpers to get bigjoiner primary/secondary crtc
  Revert "drm/msm/mdp5: provide dynamic bandwidth management"
  drm/msm/mdp5: provide dynamic bandwidth management
  drm/msm/mdp5: add perf blocks for holding fudge factors
  drm/msm/mdp5: switch to standard zpos property
  drm/msm/mdp5: add support for alpha/blend_mode properties
  drm/msm/mdp5: use drm_plane_state for pixel blend mode
  drm/msm/mdp5: use drm_plane_state for storing alpha value
  drm/msm/mdp5: use drm atomic helpers to handle base drm plane state
  drm/msm/dsi: do not enable PHYs when called for the slave DSI interface
  drm/msm: Add debugfs to trigger shrinker
  drm/msm/dpu: Avoid ABBA deadlock between IRQ modules
  drm/msm: devcoredump iommu fault support
  iommu/arm-smmu-qcom: Add stall support
  drm/msm: Improve the a6xx page fault handler
  iommu/arm-smmu-qcom: Add an adreno-smmu-priv callback to get pagefault info
  iommu/arm-smmu: Add support for driver IOMMU fault handlers
  drm/msm: export hangcheck_period in debugfs
  drm/msm/a6xx: add support for Adreno 660 GPU
  ...
2021-07-01 12:53:43 -07:00
Maxime Ripard
91e99e1139
drm/vc4: hdmi: Register HDMI codec
The hdmi-codec brings a lot of advanced features, including the HDMI
channel mapping. Let's use it in our driver instead of our own codec.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210525132354.297468-11-maxime@cerno.tech
2021-06-23 14:32:28 +02:00
Dom Cobley
8434111ccf
drm/vc4: hdmi: Remove firmware logic for MAI threshold setting
This was a workaround for bugs in hardware on earlier Pi models
and wasn't totally successful.

It makes audio quality worse on a Pi4 at the higher sample rates

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210525132354.297468-10-maxime@cerno.tech
2021-06-23 14:32:28 +02:00
Dom Cobley
9a8fd277a8
drm/vc4: hdmi: Set VC4_HDMI_MAI_CONFIG_FORMAT_REVERSE
Without this bit set, HDMI_MAI_FORMAT doesn't pick up
the format and samplerate from DVP_CFG_MAI0_FMT and you
can't get HDMI_HDMI_13_AUDIO_STATUS_1 to indicate HBR mode

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210525132354.297468-9-maxime@cerno.tech
2021-06-23 14:32:28 +02:00
Dom Cobley
82bd607178
drm/vc4: hdmi: Set HDMI_MAI_FMT
The hardware uses this for generating the right audio
data island packets when using formats other than PCM

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210525132354.297468-8-maxime@cerno.tech
2021-06-23 14:32:27 +02:00
Dom Cobley
1698ecb218
drm/vc4: hdmi: Set HD_CTL_WHOLSMP and HD_CTL_CHALIGN_SET
Symptom is random switching of speakers when using multichannel.

Repeatedly running speakertest -c8 occasionally starts with
channels jumbled. This is fixed with HD_CTL_WHOLSMP.

The other bit looks beneficial and apears harmless in testing so
I'd suggest adding it too.

Documentation says: HD_CTL_WHILSMP_SET
Wait for whole sample. When this bit is set MAI transmit will start
only when there is at least one whole sample available in the fifo.

Documentation says: HD_CTL_CHALIGN_SET
Channel Align When Overflow. This bit is used to realign the audio
channels in case of an overflow.
If this bit is set, after the detection of an overflow, equal
amount of dummy words to the missing words will be written to fifo,
filling up the broken sample and maintaining alignment.

Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210525132354.297468-7-maxime@cerno.tech
2021-06-23 14:32:27 +02:00
Maxime Ripard
9984d6664c
drm/vc4: hdmi: Make sure the controller is powered in detect
If the HPD GPIO is not available and drm_probe_ddc fails, we end up
reading the HDMI_HOTPLUG register, but the controller might be powered
off resulting in a CPU hang. Make sure we have the power domain and the
HSM clock powered during the detect cycle to prevent the hang from
happening.

Fixes: 4f6e3d66ac ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210525091059.234116-4-maxime@cerno.tech
2021-06-16 14:24:23 +02:00
Maxime Ripard
411efa18e4
drm/vc4: hdmi: Move the HSM clock enable to runtime_pm
In order to access the HDMI controller, we need to make sure the HSM
clock is enabled. If we were to access it with the clock disabled, the
CPU would completely hang, resulting in an hard crash.

Since we have different code path that would require it, let's move that
clock enable / disable to runtime_pm that will take care of the
reference counting for us.

Fixes: 4f6e3d66ac ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210525091059.234116-3-maxime@cerno.tech
2021-06-16 14:24:11 +02:00
Maxime Ripard
f4790083c7
drm/vc4: hdmi: Rely on interrupts to handle hotplug
DRM currently polls for the HDMI connector status every 10s, which can
be an issue when we connect/disconnect a display quickly or the device
on the other end only issues a hotplug pulse (for example on EDID
change).

Switch the driver to rely on the internal controller logic for the
BCM2711/RPi4.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524132018.264396-1-maxime@cerno.tech
2021-06-16 14:20:02 +02:00
Maxime Ripard
6800234cee
drm/vc4: hdmi: Convert to gpiod
The new gpiod interface takes care of parsing the GPIO flags and to
return the logical value when accessing an active-low GPIO, so switching
to it simplifies a lot the driver.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524131852.263883-2-maxime@cerno.tech
2021-06-07 13:33:46 +02:00
Maxime Ripard
e075a78119
drm/vc4: hdmi: Fix error path of hpd-gpios
If the of_get_named_gpio_flags call fails in vc4_hdmi_bind, we jump to
the err_unprepare_hsm label. That label will then call
pm_runtime_disable and put_device on the DDC device.

We just retrieved the DDC device, so the latter is definitely justified.
However at that point we still haven't called pm_runtime_enable, so the
call to pm_runtime_disable is not supposed to be there.

Fixes: 10ee275cb1 ("drm/vc4: prepare for CEC support")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524131852.263883-1-maxime@cerno.tech
2021-06-07 13:33:46 +02:00
Zou Wei
5e4322a8b2
drm/vc4: hdmi: Fix PM reference leak in vc4_hdmi_encoder_pre_crtc_co()
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/1621840854-105978-1-git-send-email-zou_wei@huawei.com
2021-05-25 10:32:56 +02:00
Maxime Ripard
257d36d493
drm/vc4: hdmi: Add a workqueue to set scrambling
It looks like some displays (like the LG 27UL850-W) don't enable the
scrambling when the HDMI driver enables it. However, if we set later the
scrambler enable bit, the display will work as expected.

Let's create delayed work queue to periodically look at the display
scrambling status, and if it's not set yet try to enable it again.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-12-maxime@cerno.tech
2021-05-24 14:44:04 +02:00
Maxime Ripard
c85695a201
drm/vc4: hdmi: Enable the scrambler
The HDMI controller on the BCM2711 includes a scrambler in order to
reach the HDMI 2.0 modes that require it. Let's add the support for it.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-11-maxime@cerno.tech
2021-05-24 14:43:36 +02:00
Maxime Ripard
86e3a65fdb
drm/vc4: hdmi: Check and warn if we can't reach 4kp60 frequencies
In order to reach the frequencies needed to output at 594MHz, the
firmware needs to be configured with the appropriate parameters in the
config.txt file (enable_hdmi_4kp60 and force_turbo).

Let's detect it at bind time, warn the user if we can't, and filter out
the relevant modes.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-10-maxime@cerno.tech
2021-05-24 14:42:40 +02:00
Maxime Ripard
7d9061e097
drm/vc4: hdmi: Properly compute the BVB clock rate
The BVB clock rate computation doesn't take into account a mode clock of
594MHz that we're going to need to support 4k60.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-9-maxime@cerno.tech
2021-05-24 14:42:35 +02:00
Maxime Ripard
5b00600042
drm/vc4: hdmi: Prevent clock unbalance
Since we fixed the hooks to disable the encoder at boot, we now have an
unbalanced clk_disable call at boot since we never enabled them in the
first place.

Let's mimic the state of the hardware and enable the clocks at boot if
the controller is enabled to get the use-count right.

Cc: <stable@vger.kernel.org> # v5.10+
Fixes: 09c438139b ("drm/vc4: hdmi: Implement finer-grained hooks")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-7-maxime@cerno.tech
2021-05-24 14:42:22 +02:00
Maxime Ripard
76a262d274
drm/vc4: hdmi: Signal the proper colorimetry info in the infoframe
Our driver while supporting HDR didn't send the proper colorimetry info
in the AVI infoframe.

Let's add the property needed so that the userspace can let us know what
the colorspace is supposed to be.

Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430094451.2145002-5-maxime@cerno.tech
2021-05-07 17:14:59 +02:00
Dave Stevenson
bccd5c5102
drm/vc4: Add HDR metadata property to the VC5 HDMI connectors
Now that we can export deeper colour depths, add in the signalling
for HDR metadata.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430094451.2145002-3-maxime@cerno.tech
2021-05-07 17:14:59 +02:00
Maxime Ripard
ae442bf6d6 drm/vc4: hdmi: Don't register the CEC adapter if there's no interrupts
We introduced the BCM2711 support to the vc4 HDMI controller with 5.10,
but this was lacking any of the interrupts of the CEC controller so we
have to deal with the backward compatibility.

Do so by simply ignoring the CEC setup if the DT doesn't have the
interrupts property.

Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-13-maxime@cerno.tech
(cherry picked from commit 4d03ed7ad7)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:14:11 +01:00
Dom Cobley
1e5e4bbdfd drm/vc4: hdmi: Remove cec_available flag
Now that our HDMI controller supports CEC for the BCM2711, let's remove
that flag.

Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-12-maxime@cerno.tech
(cherry picked from commit f551863af9)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:14:11 +01:00
Maxime Ripard
185e98b3bd drm/vc4: hdmi: Support BCM2711 CEC interrupt setup
The HDMI controller found in the BCM2711 has an external interrupt
controller for the CEC and hotplug interrupt shared between the two
instances.

Let's add a variant flag to register a single interrupt handler and
deals with the interrupt handler setup, or two interrupt handlers
relying on an external irqchip.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-11-maxime@cerno.tech
(cherry picked from commit ad6380e9aa)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:14:11 +01:00
Maxime Ripard
ed4a6bbd63 drm/vc4: hdmi: Split the interrupt handlers
The BCM2711 has two different interrupt sources to transmit and receive
CEC messages, provided through an external interrupt chip shared between
the two HDMI interrupt controllers.

The rest of the CEC controller is identical though so we need to change
a bit the code organisation to share the code as much as possible, yet
still allowing to register independent handlers.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-10-maxime@cerno.tech
(cherry picked from commit 0c38490a03)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:14:11 +01:00
Maxime Ripard
23b7eb5c12 drm/vc4: hdmi: Introduce a CEC clock
While the BCM2835 had the CEC clock derived from the HSM clock, the
BCM2711 has a dedicated parent clock for it.

Let's introduce a separate clock for it so that we can handle both
cases.

Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-9-maxime@cerno.tech
(cherry picked from commit cd7f016c93)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:14:11 +01:00
Maxime Ripard
47fa9a8027 drm/vc4: hdmi: Update the CEC clock divider on HSM rate change
As part of the enable sequence we might change the HSM clock rate if the
pixel rate is different than the one we were already dealing with.

On the BCM2835 however, the CEC clock derives from the HSM clock so any
rate change will need to be reflected in the CEC clock divider to output
40kHz.

Fixes: cd4cb49dc5 ("drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate")
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-8-maxime@cerno.tech
(cherry picked from commit a9dd0b9a5c)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:14:11 +01:00
Maxime Ripard
163a3ef681 drm/vc4: hdmi: Compute the CEC clock divider from the clock rate
The CEC clock divider needs to output a frequency of 40kHz from the HSM
rate on the BCM2835. The driver used to have a fixed frequency for it,
but that changed for the BCM2711 and we now need to compute it
dynamically to maintain the proper rate.

Fixes: cd4cb49dc5 ("drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate")
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-7-maxime@cerno.tech
(cherry picked from commit f1ceb9d100)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:14:10 +01:00
Dom Cobley
4d8602b8ec drm/vc4: hdmi: Restore cec physical address on reconnect
Currently we call cec_phys_addr_invalidate on a hotplug deassert.
That may be due to a TV power cycling, or an AVR being switched
on (and switching edid).

This makes CEC unusable since our controller wouldn't have a physical
address anymore.

Set it back up again on the hotplug assert.

Fixes: 15b4511a4a ("drm/vc4: add HDMI CEC support")
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-6-maxime@cerno.tech
(cherry picked from commit b06eecb515)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:14:10 +01:00
Dom Cobley
4a59ed546c drm/vc4: hdmi: Fix register offset with longer CEC messages
The code prior to 311e305fdb ("drm/vc4: hdmi: Implement a register
layout abstraction") was relying on the fact that the register offset
was incremented by 4 for each readl call. That worked since the register
width is 4 bytes.

However, since that commit the HDMI_READ macro is now taking an enum,
and the offset doesn't increment by 4 but 1 now. Divide the index by 4
to fix this.

Fixes: 311e305fdb ("drm/vc4: hdmi: Implement a register layout abstraction")
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-4-maxime@cerno.tech
(cherry picked from commit e9c9481f37)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:14:10 +01:00
Dom Cobley
902dc5c19a drm/vc4: hdmi: Move hdmi reset to bind
The hdmi reset got moved to a later point in the commit 9045e91a47
("drm/vc4: hdmi: Add reset callback").

However, the reset now occurs after vc4_hdmi_cec_init and so tramples
the setup of registers like HDMI_CEC_CNTRL_1

This only affects pi0-3 as on pi4 the cec registers are in a separate
block

Fixes: 9045e91a47 ("drm/vc4: hdmi: Add reset callback")
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-3-maxime@cerno.tech
(cherry picked from commit 7155334f15)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:14:10 +01:00
Dave Airlie
bc96ad6722 Linux 5.11-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmAOFRIeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG4lcH/jFAG+AXR6T2K3dG
 adJmdAWQKdDj71Ruoyefx5GSbD0B+rM1UcxOQgmZem2127RJgfDBBVYyjSwh7H1F
 LRJdN6+NKReL2OW/HMnufvpVMvWICTWHInyvsqKqp+Yo4GC5z46OtsmzSayYgTaP
 v2G9auC/rSUlzmQux9EAbTKDeNGMum3dt2rfsmnIDymBSHoPbizXF93/2hoo9jwx
 BZQCq0nYBCa9pEdsmgvqKkb/Y5+CSFoe02qdUZFIuwh6qd/XPfeDPSu4O3z4J9g6
 x8G+f7doeU0nzsAP+K0lG7ulAygxRHm5Bn2rwVdlYfihAuPNyF+Ua3duxBvjOBEY
 7w/UQ64=
 =ZWS9
 -----END PGP SIGNATURE-----

Merge tag 'v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next

Backmerge v5.11-rc5 into drm-next to clean up a bunch of conflicts we are dragging around.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-01-25 14:35:44 +10:00
Nicolas Saenz Julienne
33c74535b0
drm/vc4: Unify PCM card's driver_name
User-space ALSA matches a card's driver name against an internal list of
aliases in order to select the correct configuration for the system.
When the driver name isn't defined, the match is performed against the
card's name.

With the introduction of RPi4 we now have two HDMI ports with two
distinct audio cards. This is reflected in their names, making them
different from previous RPi versions. With this, ALSA ultimately misses
the board's configuration on RPi4.

In order to avoid this, set "card->driver_name" to "vc4-hdmi"
unanimously.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Fixes: f437bc1ec7 ("drm/vc4: drv: Support BCM2711")
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115191209.12852-1-nsaenzjulienne@suse.de
2021-01-18 11:03:59 +01:00
Maxime Ripard
ba8c0faebb
drm/vc4: hdmi: Enable 10/12 bpc output
The BCM2711 supports higher bpc count than just 8, so let's support it in
our driver.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-10-maxime@cerno.tech
2020-12-16 10:11:58 +01:00
Maxime Ripard
24169a2b05
drm/vc4: hdmi: Limit the BCM2711 to the max without scrambling
Unlike the previous generations, the HSM clock limitation is way above
what we can reach without scrambling, so let's move the maximum
frequency we support to the maximum clock frequency without scrambling.

Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-9-maxime@cerno.tech
2020-12-16 10:11:53 +01:00
Maxime Ripard
d2a7dd004c
drm/vc4: hdmi: Use the connector state pixel rate for the PHY
The PHY initialisation parameters are not based on the pixel clock but
the TMDS clock rate which can be the pixel clock in the standard case,
but could be adjusted based on some parameters like the bits per color.

Since the TMDS clock rate is stored in our custom connector state
already, let's reuse it from there instead of computing it again.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-8-maxime@cerno.tech
2020-12-16 10:11:48 +01:00
Maxime Ripard
f623746f74
drm/vc4: hdmi: Store pixel frequency in the connector state
The pixel rate is for now quite simple to compute, but with more features
(30 and 36 bits output, YUV output, etc.) will depend on a bunch of
connectors properties.

Let's store the rate we have to run the pixel clock at in our custom
connector state, and compute it in atomic_check.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-7-maxime@cerno.tech
2020-12-16 10:11:43 +01:00
Maxime Ripard
fbe7271e47
drm/vc4: hdmi: Create a custom connector state
When run with a higher bpc than 8, the clock of the HDMI controller needs
to be adjusted. Let's create a connector state that will be used at
atomic_check and atomic_enable to compute and store the clock rate
associated to the state.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-6-maxime@cerno.tech
2020-12-16 10:11:37 +01:00
Maxime Ripard
e55a077511
drm/vc4: hdmi: Don't access the connector state in reset if kmalloc fails
drm_atomic_helper_connector_reset uses kmalloc which, from an API
standpoint, can fail, and thus setting connector->state to NULL.
However, our reset hook then calls drm_atomic_helper_connector_tv_reset
that will access connector->state without checking if it's a valid
pointer or not.

Make sure we don't end up accessing a NULL pointer.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Suggested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-5-maxime@cerno.tech
2020-12-16 10:11:32 +01:00
Maxime Ripard
320e84dc61
drm/vc4: hdmi: Take into account the clock doubling flag in atomic_check
Commit 63495f6b4a ("drm/vc4: hdmi: Make sure our clock rate is within
limits") was intended to compute the pixel rate to make sure we remain
within the boundaries of what the hardware can provide.

However, unlike what mode_valid was checking for, we forgot to take
into account the clock doubling flag that can be set for modes. Let's
honor that flag if it's there.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Fixes: 63495f6b4a ("drm/vc4: hdmi: Make sure our clock rate is within limits")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-4-maxime@cerno.tech
2020-12-16 10:11:28 +01:00
Maxime Ripard
8d91474667
drm/vc4: Pass the atomic state to encoder hooks
We'll need to access the connector state in our encoder setup, so let's
just pass the whole DRM state to our private encoder hooks.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-3-maxime@cerno.tech
2020-12-16 10:11:22 +01:00
Maarten Lankhorst
ae75a0431f Merge drm/drm-next into drm-misc-next
Required backmerge since we will be based on top of v5.11, and there
has been a request to backmerge already to upstream some features.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2020-12-15 11:05:43 +01:00
Linus Torvalds
1d36dffa5d drm for 5.11-rc1
core:
 - documentation updates
 - deprecate DRM_FORMAT_MOD_NONE
 - atomic crtc enable/disable rework
 - GEM convert drivers to gem object functions
 - remove SCATTER_LIST_MAX_SEGMENT
 
 sched:
 - avoid infinite waits
 
 ttm:
 - remove AGP support
 - don't modify caching for swapout
 - ttm pinning rework
 - major TTM reworks
 - new backend allocator
 - multihop support
 
 vram-helper:
 - top down BO placement fix
 - TTM changes
 - GEM object support
 
 displayport:
 - DP 2.0 DPCD prep work
 - DP MST extended DPCD caps
 
 fbdev:
 - mark as orphaned
 
 amdgpu:
 - Initial Vangogh support
 - Green Sardine support
 - Dimgrey Cavefish support
 - SG display support for renoir
 - SMU7 improvements
 - gfx9+ modiifier support
 - CI BACO fixes
 
 radeon:
 - expose voltage via hwmon on SUMO
 
 amdkfd:
 - fix unique id handling
 
 i915:
 - more DG1 enablement
 - bigjoiner support
 - integer scaling filter support
 - async flip support
 - ICL+ DSI command mode
 - Improve display shutdown
 - Display refactoring
 - eLLC machine fbdev loading fix
 - dma scatterlist fixes
 - TGL hang fixes
 - eLLC display buffer caching on SKL+
 - MOCS PTE seeting for gen9+
 
 msm:
 - Shutdown hook
 - GPU cooling device support
 - DSI 7nm and 10nm phy/pll updates
 - sm8150/sm2850 DPU support
 - GEM locking re-work
 - LLCC system cache support
 
 aspeed:
 - sysfs output config support
 
 ast:
 - LUT fix
 - new display mode
 
 gma500:
 - remove 2d framebuffer accel
 
 panfrost:
 - move gpu reset to a worker
 
 exynos:
 - new HDMI mode support
 
 mediatek:
 - MT8167 support
 - yaml bindings
 - MIPI DSI phy code moved
 
 etnaviv:
 - new perf counter
 - more lockdep annotation
 
 hibmc:
 - i2c DDC support
 
 ingenic:
 - pixel clock reset fix
 - reserved memory support
 - allow both DMA channels at once
 - different pixel format support
 - 30/24/8-bit palette modes
 
 tilcdc:
 - don't keep vblank irq enabled
 
 vc4:
 - new maintainer added
 - DSI registration fix
 
 virtio:
 - blob resource support
 - host visible and cross-device support
 - uuid api support
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJf0upGAAoJEAx081l5xIa+1EoP/2OkZnl5d9S26qPja15EoRFl
 S69OjNci331Br9Y111jD2OCtyqA7w3ppnvCmzpHOBK1IZjhkxOVNC6PSUFSV4M3V
 oVOxZK0KaMHpLU2p90NbURWHa2TOktj7IWb9FrhPaEeBECbFuORZ2TbloFhaoyyt
 9auEAwqYRPgF8CSYOjQGGZJ85MQN4ImExTdY13+BZgQlGLiSPHfpnLVJ1Q5TPt6A
 BLgcU/DFcqOZqyjeu+CuA+LZSHjHeVJxTOGRX65PoTtU3Xus8TRZ/qL4r8e6mAI1
 boFLmsevvQlzaQ9GFohc+l9QR/dtnm6SpZxuEelewh7sQvsz2GI+SNF+OHcwHCph
 TYIEtyZNaz1bf7ip75FGbhEVaWh2PUMn3zkGlYt+zqAtznYB+dFPc31hhuVn3o5X
 c8UwLDUUJLzTePKPZ0UtzIu4Gm2RYTyRsnUAP0OKP/0WaZRyxnoQMYm5Llg7RBe0
 5ZJSWjJPBlv1YMWAHQ0YMZ+MhnFE8k4eV/8WfBQnb2INosgzKfJXEmu6ffAkPqSq
 jxBsrVQwtOMF2P9VEfdQDv3fs0GKDuZN5ezTFuW59Dt4VYfCUe2FTssSwFBIp5X9
 erPJ/nk883rcI6F0PdArNYvWpwPlVSDJyfTxQbYYxVAf8X1ARJCU3PT6iBnGO3i4
 d5tveSc8HoOXr4W3eIjn
 =c9rl
 -----END PGP SIGNATURE-----

Merge tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "Not a huge amount of big things here, AMD has support for a few new HW
  variants (vangogh, green sardine, dimgrey cavefish), Intel has some
  more DG1 enablement. We have a few big reworks of the TTM layers and
  interfaces, GEM and atomic internal API reworks cross tree. fbdev is
  marked orphaned in here as well to reflect the current reality.

  core:
   - documentation updates
   - deprecate DRM_FORMAT_MOD_NONE
   - atomic crtc enable/disable rework
   - GEM convert drivers to gem object functions
   - remove SCATTER_LIST_MAX_SEGMENT

  sched:
   - avoid infinite waits

  ttm:
   - remove AGP support
   - don't modify caching for swapout
   - ttm pinning rework
   - major TTM reworks
   - new backend allocator
   - multihop support

  vram-helper:
   - top down BO placement fix
   - TTM changes
   - GEM object support

  displayport:
   - DP 2.0 DPCD prep work
   - DP MST extended DPCD caps

  fbdev:
   - mark as orphaned

  amdgpu:
   - Initial Vangogh support
   - Green Sardine support
   - Dimgrey Cavefish support
   - SG display support for renoir
   - SMU7 improvements
   - gfx9+ modiifier support
   - CI BACO fixes

  radeon:
   - expose voltage via hwmon on SUMO

  amdkfd:
   - fix unique id handling

  i915:
   - more DG1 enablement
   - bigjoiner support
   - integer scaling filter support
   - async flip support
   - ICL+ DSI command mode
   - Improve display shutdown
   - Display refactoring
   - eLLC machine fbdev loading fix
   - dma scatterlist fixes
   - TGL hang fixes
   - eLLC display buffer caching on SKL+
   - MOCS PTE seeting for gen9+

  msm:
   - Shutdown hook
   - GPU cooling device support
   - DSI 7nm and 10nm phy/pll updates
   - sm8150/sm2850 DPU support
   - GEM locking re-work
   - LLCC system cache support

  aspeed:
   - sysfs output config support

  ast:
   - LUT fix
   - new display mode

  gma500:
   - remove 2d framebuffer accel

  panfrost:
   - move gpu reset to a worker

  exynos:
   - new HDMI mode support

  mediatek:
   - MT8167 support
   - yaml bindings
   - MIPI DSI phy code moved

  etnaviv:
   - new perf counter
   - more lockdep annotation

  hibmc:
   - i2c DDC support

  ingenic:
   - pixel clock reset fix
   - reserved memory support
   - allow both DMA channels at once
   - different pixel format support
   - 30/24/8-bit palette modes

  tilcdc:
   - don't keep vblank irq enabled

  vc4:
   - new maintainer added
   - DSI registration fix

  virtio:
   - blob resource support
   - host visible and cross-device support
   - uuid api support"

* tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm: (1754 commits)
  drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs
  drm/amdgpu: fix size calculation with stolen vga memory
  drm/amdgpu: remove amdgpu_ttm_late_init  and amdgpu_bo_late_init
  drm/amdgpu: free the pre-OS console framebuffer after the first modeset
  drm/amdgpu: enable runtime pm using BACO on CI dGPUs
  drm/amdgpu/cik: enable BACO reset on Bonaire
  drm/amd/pm: update smu10.h WORKLOAD_PPLIB setting for raven
  drm/amd/pm: remove one unsupported smu function for vangogh
  drm/amd/display: setup system context for APUs
  drm/amd/display: add S/G support for Vangogh
  drm/amdkfd: Fix leak in dmabuf import
  drm/amdgpu: use AMDGPU_NUM_VMID when possible
  drm/amdgpu: fix sdma instance fw version and feature version init
  drm/amd/pm: update driver if version for dimgrey_cavefish
  drm/amd/display: 3.2.115
  drm/amd/display: [FW Promotion] Release 0.0.45
  drm/amd/display: Revert DCN2.1 dram_clock_change_latency update
  drm/amd/display: Enable gpu_vm_support for dcn3.01
  drm/amd/display: Fixed the audio noise during mode switching with HDCP mode on
  drm/amd/display: Add wm table for Renoir
  ...
2020-12-14 11:07:56 -08:00
Maxime Ripard
e2f9b2edf7
drm/vc4: hdmi: Don't poll for the infoframes status on setup
The infoframes are sent at a regular interval as a data island packet,
so we don't need to wait for them to be sent when we're setting them up.

However, we do need to poll when we're enabling since the we can't
update the packet RAM until it has been sent.

Let's add a boolean flag to tell whether we want to poll or not to
support both cases.

Suggested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201203074624.721559-1-maxime@cerno.tech
2020-12-07 10:30:47 +01:00
Maxime Ripard
9fa1d7e60a
drm/vc4: hdmi: Disable Wifi Frequencies
There's cross-talk on the RPi4 between the 2.4GHz channels used by the WiFi
chip and some resolutions, most notably 1440p at 60Hz.

In such a case, we can either reject entirely the mode, or lower slightly
the pixel frequency to remove the overlap. Let's go for the latter.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029134018.1948636-2-maxime@cerno.tech
2020-11-19 15:46:08 +01:00
Maxime Ripard
57fb32e632
drm/vc4: hdmi: Block odd horizontal timings
The FIFO between the pixelvalve and the HDMI controller runs at 2 pixels
per clock cycle, and cannot deal with odd timings.

Let's reject any mode with such timings.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029122522.1917579-2-maxime@cerno.tech
2020-11-19 14:29:26 +01:00
Maxime Ripard
63495f6b4a
drm/vc4: hdmi: Make sure our clock rate is within limits
The HDMI controller cannot go above a certain pixel rate limit depending on
the generations, but that limit is only enforced in mode_valid at the
moment, which means that we won't advertise modes that exceed that limit,
but the userspace is still free to try to setup a mode that would.

Implement atomic_check to make sure we check it in that scenario too.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029122522.1917579-1-maxime@cerno.tech
2020-11-19 14:29:13 +01:00
Lee Jones
2bac959c5a drm/vc4/vc4_hdmi: Remove set but unused variable 'ret'
Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/vc4/vc4_hdmi.c: In function ‘vc4_hdmi_set_audio_infoframe’:
 drivers/gpu/drm/vc4/vc4_hdmi.c:334:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]

Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Clark <robdclark@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-39-lee.jones@linaro.org
2020-11-18 11:51:58 +01:00
Maxime Ripard
a3a0ded3ed
drm/vc4: hdmi: Add a name to the codec DAI component
Since the components for a given device in ASoC are identified by their
name, it makes sense to add one even though it's not strictly necessary.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708144555.718404-1-maxime@cerno.tech
2020-10-29 10:25:44 +01:00
Maxime Ripard
58d043690d
drm/vc4: hdmi: Avoid sleeping in atomic context
When running the trigger hook, ALSA by default will take a spinlock, and
thus will run the trigger hook in atomic context.

However, our HDMI driver will send the infoframes as part of the trigger
hook, and part of that process is to wait for a bit to be cleared for up to
100ms. To be nicer to the system, that wait has some usleep_range that
interact poorly with the atomic context.

There's several ways we can fix this, but the more obvious one is to make
ALSA take a mutex instead by setting the nonatomic flag on the DAI link.
That doesn't work though, since now the cyclic callback installed by the
dmaengine helpers in ALSA will take a mutex, while that callback is run by
dmaengine's virt-chan code in a tasklet where sleeping is not allowed
either.

Given the delay we need to poll the bit for, changing the usleep_range for
a udelay and keep running it from a context where interrupts are disabled
is not really a good option either.

However, we can move the infoframe setup code in the hw_params hook, like
is usually done in other HDMI controllers, that isn't protected by a
spinlock and thus where we can sleep. Infoframes will be sent on a regular
basis anyway, and since hw_params is where the audio parameters that end up
in the infoframes are setup, this also makes a bit more sense.

Fixes: bb7d785688 ("drm/vc4: Add HDMI audio support")
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201027101558.427256-1-maxime@cerno.tech
2020-10-27 22:34:27 +01:00
Linus Torvalds
93b694d096 drm next for 5.10-rc1
New driver:
 Cadence MHDP8546 DisplayPort bridge driver
 
 core:
 - cross-driver scatterlist cleanups
 - devm_drm conversions
 - remove drm_dev_init
 - devm_drm_dev_alloc conversion
 
 ttm:
 - lots of refactoring and cleanups
 
 bridges:
 - chained bridge support in more drivers
 
 panel:
 - misc new panels
 
 scheduler:
 - cleanup priority levels
 
 displayport:
 - refactor i915 code into helpers for nouveau
 
 i915:
 - split into display and GT trees
 - WW locking refactoring in GEM
 - execbuf2 extension mechanism
 - syncobj timeline support
 - GEN 12 HOBL display powersaving
 - Rocket Lake display additions
 - Disable FBC on Tigerlake
 - Tigerlake Type-C + DP improvements
 - Hotplug interrupt refactoring
 
 amdgpu:
 - Sienna Cichlid updates
 - Navy Flounder updates
 - DCE6 (SI) support for DC
 - Plane rotation enabled
 - TMZ state info ioctl
 - PCIe DPC recovery support
 - DC interrupt handling refactor
 - OLED panel fixes
 
 amdkfd:
 - add SMI events for thermal throttling
 - SMI interface events ioctl update
 - process eviction counters
 
 radeon:
 - move to dma_ for allocations
 - expose sclk via sysfs
 
 msm:
 - DSI support for sm8150/sm8250
 - per-process GPU pagetable support
 - Displayport support
 
 mediatek:
 - move HDMI phy driver to PHY
 - convert mtk-dpi to bridge API
 - disable mt2701 tmds
 
 tegra:
 - bridge support
 
 exynos:
 - misc cleanups
 
 vc4:
 - dual display cleanups
 
 ast:
 - cleanups
 
 gma500:
 - conversion to GPIOd API
 
 hisilicon:
 - misc reworks
 
 ingenic:
 - clock handling and format improvements
 
 mcde:
 - DSI support
 
 mgag200:
 - desktop g200 support
 
 mxsfb:
 - i.MX7 + i.MX8M
 - alpha plane support
 
 panfrost:
 - devfreq support
 - amlogic SoC support
 
 ps8640:
 - EDID from eDP retrieval
 
 tidss:
 - AM65xx YUV workaround
 
 virtio:
 - virtio-gpu exported resources
 
 rcar-du:
 - R8A7742, R8A774E1 and R8A77961 support
 - YUV planar format fixes
 - non-visible plane handling
 - VSP device reference count fix
 - Kconfig fix to avoid displaying disabled options in .config
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJfh579AAoJEAx081l5xIa+GqoP/0amz+ZN7y/L7+f32CRinJ7/
 3e4xjXNDmtWG4Whe/WKjlYmbAcvSdWV/4HYpurW2BFJnOAB/5lIqYcS/PyqErPzA
 w4EpRoJ+ZdFgmlDH0vdsDwPLT/HFmhUN9AopNkoZpbSMxrManSj5QgmePXyiKReP
 Q+ZAK5UW5AdOVY4bgXUSEkVq2eilCLXf+bSBR/LrVQuNgu7GULX8SIy/Y1CuMtv8
 LgzzjLKfIZaIWC+F/RU7BxJ7YnrVq7z7yXnUx8j2416+k/Wwe+BeSUCSZstT7q9G
 UkX8jWfR7ZKqhwP+UQeSwDbHkALz7lv88nyjQdxJZ3SrXRe4hy14YjxnR4maeNAj
 3TAYSdcAMWyRHqeEZIZ7Hj5sQtTq5OZAoIjxzH3vpVdAnnAkcWoF77pqxV8XPqTC
 nw40DihAxQOshGwMkjd5DqkEwnMv43Hs1WTVYu9dPTOfOdqPNt+Vqp7Xl9Z46+kV
 k6PDcx60T9ayDW1QZ6MoIXHta9E7ixzu7gYBL3vP4LuporY0uNG3bzF3CMvof1BK
 sHYcYTdZkqbTD2d6rHV+TbpPQXgTtlej9qVlQM4SeX37Xtc7LxCYpnpUHKz2S/fK
 1vyeGPgdytHblwlxwZOPZ4R2I/HTfnITdr4kMcJHhxAsEewfW1Rd4+stQqVJ2Mph
 Vz+CFP2BngivGFz5vuky
 =4H8J
 -----END PGP SIGNATURE-----

Merge tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "Not a major amount of change, the i915 trees got split into display
  and gt trees to better facilitate higher level review, and there's a
  major refactoring of i915 GEM locking to use more core kernel concepts
  (like ww-mutexes). msm gets per-process pagetables, older AMD SI cards
  get DC support, nouveau got a bump in displayport support with common
  code extraction from i915.

  Outside of drm this contains a couple of patches for hexint
  moduleparams which you've acked, and a virtio common code tree that
  you should also get via it's regular path.

  New driver:
   - Cadence MHDP8546 DisplayPort bridge driver

  core:
   - cross-driver scatterlist cleanups
   - devm_drm conversions
   - remove drm_dev_init
   - devm_drm_dev_alloc conversion

  ttm:
   - lots of refactoring and cleanups

  bridges:
   - chained bridge support in more drivers

  panel:
   - misc new panels

  scheduler:
   - cleanup priority levels

  displayport:
   - refactor i915 code into helpers for nouveau

  i915:
   - split into display and GT trees
   - WW locking refactoring in GEM
   - execbuf2 extension mechanism
   - syncobj timeline support
   - GEN 12 HOBL display powersaving
   - Rocket Lake display additions
   - Disable FBC on Tigerlake
   - Tigerlake Type-C + DP improvements
   - Hotplug interrupt refactoring

  amdgpu:
   - Sienna Cichlid updates
   - Navy Flounder updates
   - DCE6 (SI) support for DC
   - Plane rotation enabled
   - TMZ state info ioctl
   - PCIe DPC recovery support
   - DC interrupt handling refactor
   - OLED panel fixes

  amdkfd:
   - add SMI events for thermal throttling
   - SMI interface events ioctl update
   - process eviction counters

  radeon:
   - move to dma_ for allocations
   - expose sclk via sysfs

  msm:
   - DSI support for sm8150/sm8250
   - per-process GPU pagetable support
   - Displayport support

  mediatek:
   - move HDMI phy driver to PHY
   - convert mtk-dpi to bridge API
   - disable mt2701 tmds

  tegra:
   - bridge support

  exynos:
   - misc cleanups

  vc4:
   - dual display cleanups

  ast:
   - cleanups

  gma500:
   - conversion to GPIOd API

  hisilicon:
   - misc reworks

  ingenic:
   - clock handling and format improvements

  mcde:
   - DSI support

  mgag200:
   - desktop g200 support

  mxsfb:
   - i.MX7 + i.MX8M
   - alpha plane support

  panfrost:
   - devfreq support
   - amlogic SoC support

  ps8640:
   - EDID from eDP retrieval

  tidss:
   - AM65xx YUV workaround

  virtio:
   - virtio-gpu exported resources

  rcar-du:
   - R8A7742, R8A774E1 and R8A77961 support
   - YUV planar format fixes
   - non-visible plane handling
   - VSP device reference count fix
   - Kconfig fix to avoid displaying disabled options in .config"

* tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits)
  drm/ingenic: Fix bad revert
  drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init
  drm/amdgpu: Remove warning for virtual_display
  drm/amdgpu: kfd_initialized can be static
  drm/amd/pm: setup APU dpm clock table in SMU HW initialization
  drm/amdgpu: prevent spurious warning
  drm/amdgpu/swsmu: fix ARC build errors
  drm/amd/display: Fix OPTC_DATA_FORMAT programming
  drm/amd/display: Don't allow pstate if no support in blank
  drm/panfrost: increase readl_relaxed_poll_timeout values
  MAINTAINERS: Update entry for st7703 driver after the rename
  Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached"
  drm/amd/display: HDMI remote sink need mode validation for Linux
  drm/amd/display: Change to correct unit on audio rate
  drm/amd/display: Avoid set zero in the requested clk
  drm/amdgpu: align frag_end to covered address space
  drm/amdgpu: fix NULL pointer dereference for Renoir
  drm/vmwgfx: fix regression in thp code due to ttm init refactor.
  drm/amdgpu/swsmu: add interrupt work handler for smu11 parts
  drm/amdgpu/swsmu: add interrupt work function
  ...
2020-10-15 10:46:16 -07:00
Dan Carpenter
14929c5ae8
drm/vc4: hdmi: Fix NULL vs IS_ERR() checks in vc5_hdmi_init_resources()
The devm_ioremap() function never returns error pointers, it returns
NULL.

Fixes: 8323989140 ("drm/vc4: hdmi: Support the BCM2711 HDMI controllers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910100825.GC79916@mwanda
2020-09-10 12:15:57 +02:00
Marek Szyprowski
ec653df2a0
drm/vc4/vc4_hdmi: fill ASoC card owner
card->owner is a required property and since commit 81033c6b58 ("ALSA:
core: Warn on empty module") a warning is issued if it is empty. Fix lack
of it. This fixes following warning observed on RaspberryPi 3B board
with ARM 32bit kernel and multi_v7_defconfig:

------------[ cut here ]------------
WARNING: CPU: 1 PID: 210 at sound/core/init.c:207 snd_card_new+0x378/0x398 [snd]
Modules linked in: vc4(+) snd_soc_core ac97_bus snd_pcm_dmaengine bluetooth snd_pcm snd_timer crc32_arm_ce raspberrypi_hwmon snd soundcore ecdh_generic ecc bcm2835_thermal phy_generic
CPU: 1 PID: 210 Comm: systemd-udevd Not tainted 5.8.0-rc1-00027-g81033c6b584b #1087
Hardware name: BCM2835
[<c03113c0>] (unwind_backtrace) from [<c030bcb4>] (show_stack+0x10/0x14)
[<c030bcb4>] (show_stack) from [<c071cef8>] (dump_stack+0xd4/0xe8)
[<c071cef8>] (dump_stack) from [<c0345bfc>] (__warn+0xdc/0xf4)
[<c0345bfc>] (__warn) from [<c0345cc4>] (warn_slowpath_fmt+0xb0/0xb8)
[<c0345cc4>] (warn_slowpath_fmt) from [<bf02ff74>] (snd_card_new+0x378/0x398 [snd])
[<bf02ff74>] (snd_card_new [snd]) from [<bf11f0b4>] (snd_soc_bind_card+0x280/0x99c [snd_soc_core])
[<bf11f0b4>] (snd_soc_bind_card [snd_soc_core]) from [<bf12f000>] (devm_snd_soc_register_card+0x34/0x6c [snd_soc_core])
[<bf12f000>] (devm_snd_soc_register_card [snd_soc_core]) from [<bf165654>] (vc4_hdmi_bind+0x43c/0x5f4 [vc4])
[<bf165654>] (vc4_hdmi_bind [vc4]) from [<c09d660c>] (component_bind_all+0xec/0x24c)
[<c09d660c>] (component_bind_all) from [<bf15c44c>] (vc4_drm_bind+0xd4/0x174 [vc4])
[<bf15c44c>] (vc4_drm_bind [vc4]) from [<c09d6ac0>] (try_to_bring_up_master+0x160/0x1b0)
[<c09d6ac0>] (try_to_bring_up_master) from [<c09d6f38>] (component_master_add_with_match+0xd0/0x104)
[<c09d6f38>] (component_master_add_with_match) from [<bf15c588>] (vc4_platform_drm_probe+0x9c/0xbc [vc4])
[<bf15c588>] (vc4_platform_drm_probe [vc4]) from [<c09df740>] (platform_drv_probe+0x6c/0xa4)
[<c09df740>] (platform_drv_probe) from [<c09dd6f0>] (really_probe+0x210/0x350)
[<c09dd6f0>] (really_probe) from [<c09dd940>] (driver_probe_device+0x5c/0xb4)
[<c09dd940>] (driver_probe_device) from [<c09ddb38>] (device_driver_attach+0x58/0x60)
[<c09ddb38>] (device_driver_attach) from [<c09ddbc0>] (__driver_attach+0x80/0xbc)
[<c09ddbc0>] (__driver_attach) from [<c09db820>] (bus_for_each_dev+0x68/0xb4)
[<c09db820>] (bus_for_each_dev) from [<c09dc9f8>] (bus_add_driver+0x130/0x1e8)
[<c09dc9f8>] (bus_add_driver) from [<c09de648>] (driver_register+0x78/0x110)
[<c09de648>] (driver_register) from [<c0302038>] (do_one_initcall+0x50/0x220)
[<c0302038>] (do_one_initcall) from [<c03db544>] (do_init_module+0x60/0x210)
[<c03db544>] (do_init_module) from [<c03da4f8>] (load_module+0x1e34/0x2338)
[<c03da4f8>] (load_module) from [<c03dac00>] (sys_finit_module+0xac/0xbc)
[<c03dac00>] (sys_finit_module) from [<c03000c0>] (ret_fast_syscall+0x0/0x54)
Exception stack(0xeded9fa8 to 0xeded9ff0)
...
---[ end trace 6414689569c2bc08 ]---

Fixes: bb7d785688 ("drm/vc4: Add HDMI audio support")
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701073949.28941-1-m.szyprowski@samsung.com
2020-09-09 16:55:29 +02:00
Maxime Ripard
8323989140
drm/vc4: hdmi: Support the BCM2711 HDMI controllers
Now that the driver is ready for it, let's bring in the HDMI controllers
variants for the BCM2711.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b540c7a9ebb7ad51da39271a8388b69c7e27e582.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:14:54 +02:00
Hoegeun Kwon
373874298c
drm/vc4: hdmi: Add pixel BVB clock control
The BCM2711 has another clock that needs to be ramped up depending on the
pixel rate: the pixel BVB clock. Add the code to adjust that clock when
changing the mode.

[Maxime: Changed the commit log, used clk_set_min_rate]

Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20200901040759.29992-3-hoegeun.kwon@samsung.com
Link: https://patchwork.freedesktop.org/patch/msgid/d757ddd6549da140f178563e5fd2bf1d129913fd.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:14:54 +02:00
Maxime Ripard
81d830137b
drm/vc4: hdmi: Switch to blank pixels when disabled
In order to avoid pixels getting stuck in an unflushable FIFO, we need when
we disable the HDMI controller to switch away from getting our pixels from
the pixelvalve and instead use blank pixels, and switch back to the
pixelvalve when we enable the HDMI controller.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fde3efb1ad79f4476a73d310cbba3ec07dc6dabe.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:14:54 +02:00
Maxime Ripard
8b3f90e98e
drm/vc4: hdmi: Do the VID_CTL configuration at once
The VID_CTL setup is done in several places in the driver even though it's
not really required. Let's simplify it a bit to do the configuration in one
go.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/08e7ebb605a560fcc149b69b4af52753a7870b2f.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:14:54 +02:00
Maxime Ripard
09c438139b
drm/vc4: hdmi: Implement finer-grained hooks
In order to prevent some pixels getting stuck in an unflushable FIFO on
bcm2711, we need to enable the HVS, the pixelvalve (the CRTC) and the HDMI
controller (the encoder) in an intertwined way, and with tight delays.

However, the atomic callbacks don't really provide a way to work with
either constraints, so we need to roll our own callbacks so that we can
provide those guarantees.

Since those callbacks have been implemented and called in the CRTC code, we
can just implement them in the HDMI driver now.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2e9226d971117065f3b97e597f04f7fe2f0c134c.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:14:54 +02:00
Maxime Ripard
691456f622
drm/vc4: hdmi: Always recenter the HDMI FIFO
In order to avoid a pixel getting stuck in an unflushable FIFO, we need to
recenter the FIFO every time we're doing a modeset and not only if we're
connected to an HDMI monitor.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b3faaf05ac6c4d3c364d28fa441571eb85903269.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:14:53 +02:00
Maxime Ripard
1bb0522e92
drm/vc4: hdmi: Remove register dumps in enable
The current code has some logic, disabled by default, to dump the register
setup in the HDMI controller.

However, since we're going to split those functions in multiple, shorter,
functions that only make sense where they are called in sequence, keeping
the register dump makes little sense.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c8c8d388f2d32fc3536336be36d003a862487eb7.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:14:53 +02:00
Maxime Ripard
9be43a5a6d
drm/vc4: hdmi: Deal with multiple ALSA cards
The HDMI driver was registering a single ALSA card so far with the name
vc4-hdmi.

Obviously, this is not going to work anymore when we will have multiple
HDMI controllers since we will end up trying to register two files with the
same name.

Let's use the variant to avoid that name conflict.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e60a37444e848a384a45707a21d6df8883115f86.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:14:53 +02:00
Dave Stevenson
632ee3aa87
drm/vc4: hdmi: Add audio-related callbacks
The audio configuration has changed for the BCM2711, with notably a
different parent clock and a different channel configuration.

Make that modular to be able to support the BCM2711.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://patchwork.freedesktop.org/patch/msgid/85a8ca721c2d800be758c55870cea98536749680.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:14:53 +02:00
Dave Stevenson
b9b8bac60a
drm/vc4: hdmi: Set the b-frame marker to the match ALSA's default.
ALSA's iec958 plugin by default sets the block start preamble
to 8, whilst this driver was programming the hardware to expect
0xF.
Amend the hardware config to match ALSA.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d0b126deb228baf1244c91e02ac0a8f7c9c60dc5.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:14:53 +02:00
Dave Stevenson
6ac1c75322
drm/vc4: hdmi: Reset audio infoframe on encoder_enable if previously streaming
If the encoder is disabled and re-enabled (eg mode change) all infoframes
are reset, whilst the audio subsystem know nothing about this change.
The driver therefore needs to reinstate the audio infoframe for
itself.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cd579ccc2c9b9d2fce0ebaf32f847cedb0e4a7a2.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:14:53 +02:00
Dave Stevenson
094864bd00
drm/vc4: hdmi: Use reg-names to retrieve the HDMI audio registers
The register range used for audio setup in the previous generations of
SoC were always the second range in the device tree. However, now that
the BCM2711 has way more register ranges, it makes sense to retrieve it
by names for it, while preserving the id-based lookup as a fallback.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a1ba5605fe1006a1ead5262ef3d66ea5d0750381.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:14:53 +02:00
Maxime Ripard
d5d5ce885c
drm/vc4: hdmi: Use clk_set_min_rate instead
The HSM clock needs to be running at 101% the pixel clock of the HDMI
controller, however it's shared between the two HDMI controllers, which
means that if the resolutions are different between the two HDMI
controllers, and the lowest resolution is on the second (in enable order)
controller, the first HDMI controller will end up with a smaller than
expected clock rate.

Since we don't really need an exact frequency there, we can simply change
the minimum rate we expect instead.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/821992209cc0d7a83254bf26fe2bf507ef0994d2.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:14:53 +02:00
Maxime Ripard
cd4cb49dc5
drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate
The HSM clock needs to be setup at around 101% of the pixel rate. This
was done previously by setting the clock rate to 163.7MHz at probe time and
only check in mode_valid whether the mode pixel clock was under the pixel
clock +1% or not.

However, with 4k we need to change that frequency to a higher frequency
than 163.7MHz, and yet want to have the lowest clock as possible to have a
decent power saving.

Let's change that logic a bit by setting the clock rate of the HSM clock
to the pixel rate at encoder_enable time. This would work for the
BCM2711 that support 4k resolutions and has a clock that can provide it,
but we still have to take care of a 4k panel plugged on a BCM283x SoCs
that wouldn't be able to use those modes, so let's define the limit in
the variant.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7e692ddc231d33dd671e70ea04dd1dcf56c1ecb3.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:14:53 +02:00
Maxime Ripard
11a1731eb6
drm/vc4: hdmi: Rename drm_encoder pointer in mode_valid
The mode_valid hook on the encoder uses a pointer to a drm_encoder called
crtc, which is pretty confusing. Let's rename it to encoder to make it
clear what it is.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7fbabab03992efe4a3a3640ac5ee2bb49b1c7338.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:14:52 +02:00
Maxime Ripard
4c55c2c40d
drm/vc4: hdmi: Remove unused CEC_CLOCK_DIV define
The CEC_CLOCK_DIV define is not used anywhere in the driver, let's remove
it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/53805cc47e99a137e5f08c92fb781cc2e2134299.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:14:52 +02:00
Maxime Ripard
234f4212ec
drm/vc4: hdmi: Add CEC support flag
Similarly to the audio support, CEC support is not there yet for the
BCM2711, so let's skip entirely the CEC initialization through a variant
flag.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bd0c4afa83b4e121692352cdc2dd1886162c7552.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:14:52 +02:00
Maxime Ripard
c0791e0838
drm/vc4: hdmi: Move CEC init to its own function
The CEC init code was put directly into the bind function, which was quite
inconsistent with how the audio support was done, and would prevent us from
further changes to skip that initialisation entirely.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/21f4717e076291522d0784a7fd3774d8e97eaf01.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:14:52 +02:00
Maxime Ripard
b2405c9826
drm/vc4: hdmi: Deal with multiple debugfs files
The HDMI driver was registering a single debugfs file so far with the name
hdmi_regs.

Obviously, this is not going to work anymore when will have multiple HDMI
controllers since we will end up trying to register two files with the same
name.

Let's use the variant to avoid that name conflict.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9505c1eb40b3ef3709277bf9e8af77917b249c32.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:14:52 +02:00
Maxime Ripard
7d73299dad
drm/vc4: hdmi: Store the encoder type in the variant structure
The vc4 CRTC will use the encoder type to control its output clock
muxing. However, this will be different from HDMI0 to HDMI1, so let's
store our type in the variant structure so that we can support multiple
controllers later on.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2736a86b498551ba9dbc5803c5bb910627a2550c.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:14:52 +02:00
Maxime Ripard
904f668adc
drm/vc4: hdmi: Add a set_timings callback
Similarly to the previous patches, the timings setup in the HDMI controller
of the BCM2711 is slightly different, mostly because it supports higher
resolutions and thus needed more spaces for the various timings, resulting
in the register layout changing.

Let's add a callback for that as well.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0cfcbb379212f90b4abc76c0ccf3b90d1d7c0268.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:14:52 +02:00
Maxime Ripard
89f31a23fd
drm/vc4: hdmi: Add a CSC setup callback
Similarly to the previous patches, the CSC setup is slightly different in
the BCM2711 than in the previous generations. Let's add a callback for it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5c19bbf10153cb42ca0fb67e08606c8295c17236.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:14:45 +02:00
Maxime Ripard
647b965506
drm/vc4: hdmi: Add PHY RNG enable / disable function
Let's continue the implementation of hooks for the parts that change in the
BCM2711 SoC with the PHY RNG setup.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/216155f1c0b83e622ac60a2f7d00eb707de3acba.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:06:09 +02:00
Maxime Ripard
c457b8aede
drm/vc4: hdmi: Add PHY init and disable function
The HDMI PHY in the BCM2711 HDMI controller is significantly more
complicated to setup than in the older BCM283x SoCs.

Let's add hooks to enable and disable the PHY.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7216826284dbc60a58bdacd662805d20699e5c80.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:06:04 +02:00
Maxime Ripard
9045e91a47
drm/vc4: hdmi: Add reset callback
The BCM2711 and BCM283x HDMI controllers use a slightly different reset
sequence, so let's add a callback to reset the controller.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a34bcb493da07eae58ed704f65e72ce0748e8952.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:05:59 +02:00
Maxime Ripard
311e305fdb
drm/vc4: hdmi: Implement a register layout abstraction
The HDMI controllers found in the BCM2711 have most of the registers
reorganized in multiple registers areas and at different offsets than
previously found.

The logic however remains pretty much the same, so it doesn't really make
sense to create a whole new driver and we should share the code as much as
possible.

Let's implement some indirection to wrap around a register and depending on
the variant will lookup the associated register on that particular variant.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3070236daff920e7edd11c5a72ac31fd0f6a656b.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:05:52 +02:00
Maxime Ripard
33c773eb62
drm/vc4: hdmi: Introduce resource init and variant
The HDMI controllers found in the BCM2711 has a pretty different clock and
registers areas than found in the older BCM283x SoCs.

Let's create a variant structure to store the various adjustments we'll
need later on, and a function to get the resources needed for one
particular version.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/71cfa3ce3d865bbab52a0e5651bc052dc4893f11.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:05:48 +02:00
Maxime Ripard
0532e5e5e0
drm/vc4: hdmi: Remove vc4_hdmi_connector
The vc4_hdmi_connector was only used to switch between drm_connector to
drm_encoder. However, we can now use vc4_hdmi to do the switch, so that
structure is redundant.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/aee5120728db350b19c074de4290eafaf01e6671.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:05:43 +02:00
Maxime Ripard
283d347d6e
drm/vc4: hdmi: Remove vc4_dev hdmi pointer
Now that we don't have any users anymore, we can kill that pointer.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/d7ebf50319bbd902e4b7b7c39ae1612c3b38e6b2.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:05:38 +02:00
Maxime Ripard
47c167b757
drm/vc4: hdmi: Retrieve the vc4_hdmi at unbind using our device
The unbind function needs to retrieve a vc4_hdmi structure pointer through
the struct device that we're given since we want to support multiple HDMI
controllers.

However, our optional ASoC support doesn't make that trivial since it will
overwrite the device drvdata if we use it, but obviously won't if we don't
use it.

Let's make sure the fields are at the proper offset to be able to cast
between the snd_soc_card structure and the vc4_hdmi structure
transparently so we can support both cases.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/717082cba06b5c06280f26c56c08aee512365ed3.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:05:33 +02:00
Maxime Ripard
66bf1c30e0
drm/vc4: hdmi: Pass vc4_hdmi to CEC code
Our CEC code also retrieves the associated vc4_hdmi by setting the
vc4_dev pointer as its private data, and then dereferences its vc4_hdmi
pointer.

In order to eventually get rid of that pointer, we can simply pass the
vc4_hdmi pointer directly.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/cb575cb9e13018bce131b8535e5b572dc1027877.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:05:28 +02:00
Maxime Ripard
5dfbcae63f
drm/vc4: hdmi: Add container_of macros for encoders and connectors
Whenever the code needs to access the vc4_hdmi structure from a DRM
connector or encoder, it first accesses the drm_device associated to the
connector, then retrieve the drm_dev private data which gives it a
pointer to our vc4_dev, and will finally follow the vc4_hdmi pointer in
that structure.

That will also give us some trouble when having multiple controllers,
but now that we have our encoder and connector structures that are part
of vc4_hdmi, we can simply call container_of on the DRM connector or
encoder and retrieve the vc4_hdmi structure directly.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/536ecce5898ea75839fa3788b876009d69a5ccae.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:05:24 +02:00
Maxime Ripard
b10db9a424
drm/vc4: hdmi: Use local vc4_hdmi directly
The function vc4_hdmi_connector_detect access its vc4_hdmi struct by
dereferencing the pointer in the structure vc4_dev. This will cause some
issues when we will have multiple HDMI controllers, so let's just use the
local variable for now instead of dereferencing that pointer all the time,
and we'll fix the local variable later.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/ef92c5582d3b2894128b2272a8ada7cbc20be3d9.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:05:19 +02:00
Maxime Ripard
13311457be
drm/vc4: hdmi: Move accessors to vc4_hdmi
The current driver only supports a single HDMI controller, and part of
the issue is that the main vc4_dev structure holds a pointer to its
(only) HDMI controller, and the HDMI registers accessors will use it to
retrieve the mapped addresses.

Let's modify those accessors to use directly the vc4_hdmi structure so
that we can eventually get rid of that single global pointer.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/886b955586264ce078d7d35e9b8ef9ae51675c27.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:05:13 +02:00
Maxime Ripard
3408cc23c9
drm/vc4: hdmi: Rename hdmi to vc4_hdmi
The driver isn't consistent with the name given to the vc4_hdmi
structure pointer in its functions. Make sure to use a consistent name.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/696be840dc427245afe94b43e0b829c728d948a7.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:05:09 +02:00
Maxime Ripard
b052e70dd2
drm/vc4: hdmi: Remove DDC argument to connector_init
Now that we are passing the vc4_hdmi structure to the connector init
function, we can simply use the pointer in that structure instead of
having the pointer as an argument.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/4fe1b45fe45e4ba57d40154da010807d4e5db86c.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:05:04 +02:00
Maxime Ripard
c98c85bb31
drm/vc4: hdmi: rework connectors and encoders
the vc4_hdmi driver has some custom structures to hold the data it needs to
associate with the drm_encoder and drm_connector structures.

However, it allocates them separately from the vc4_hdmi structure which
makes it more complicated than it needs to be.

Move those structures to be contained by vc4_hdmi and update the code
accordingly.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/93b418d63c876355af2b3d3afebe31a256268623.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:04:59 +02:00
Maxime Ripard
f73100cce9
drm/vc4: hdmi: Move structure to header
We will need to share the vc4_hdmi and related structures with multiple
files, so let's create a header for it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/db3ff2babc914e38e86f794c4e49128697aed887.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:04:54 +02:00
Maxime Ripard
3eda598241
drm/vc4: hdmi: Use debugfs private field
We're calling vc4_debugfs_add_file with our struct vc4_hdmi pointer set
in the private field, but we don't use that field and go through the
main struct vc4_dev to get it.

Let's use the private field directly, that will save us some trouble
later on.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/24028dc06c379dbc71f98e027cce2839fdd446ce.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:04:50 +02:00
Maxime Ripard
ed024b229d
drm/vc4: crtc: Rename HDMI encoder type to HDMI0
The previous generations were only supporting a single HDMI controller, but
that's about to change, so put an index as well to differentiate between
the two controllers.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/84e11e4793aaa30d6e5c56e305d22404ac5a932d.1599120059.git-series.maxime@cerno.tech
2020-09-07 18:03:07 +02:00
James Hilliard
8f6f5e00e5 drm/vc4: hdmi: Silence pixel clock error on -EPROBE_DEFER
If the vc4 hdmi driver loads before the pixel clock is available we
see a spurious "*ERROR* Failed to get pixel clock" error.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200525012859.267433-1-james.hilliard1@gmail.com
2020-05-25 17:11:32 +02:00
Thomas Zimmermann
08d99b2c23 Merge drm/drm-next into drm-misc-next
Backmerging required to pull topic/phy-compliance.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2020-04-17 08:12:22 +02:00