Since we only use the parsed vrefresh range to determine
if VRR should be supported we should only accept continuous
frequency displays here.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927170006.27855-4-ville.syrjala@linux.intel.com
The current comment fails to clarify why we only accept
the "range limits only" variant of the range descriptor.
Reword it to make some actual sense.
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927170006.27855-2-ville.syrjala@linux.intel.com
Replace multiple log lines with a single log line at the end of
parsing HF-VSDB. Also use drm_dbg_kms instead of DRM_DBG_KMS, and
add log for DSC1.2 support.
v2: Fixed the formatting issues in the logging (Jani).
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916100551.2531750-5-ankit.k.nautiyal@intel.com
DSC capabilities are given in bytes 11-13 of VSDB (i.e. bytes 8-10 of
SCDS). Since minimum length of Data block is 7, all bytes greater than 7
must be read only after checking the length of the data block.
This patch adds check for data block length before reading relavant DSC
bytes.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916100551.2531750-4-ankit.k.nautiyal@intel.com
HF-VSDB/SCDB has bits to advertise support for 16, 12 and 10 bpc.
If none of the bits are set, the minimum bpc supported with DSC is 8.
This patch corrects the min bpc supported to be 8, instead of 0.
Fixes: 76ee7b9056 ("drm/edid: Parse DSC1.2 cap fields from HFVSDB block")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
v2: s/DSC1.2/DSC 1.2
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916100551.2531750-2-ankit.k.nautiyal@intel.com
EDID 1.4 introduced some extra flags in the range
descriptor to support min/max h/vfreq >= 255. Consult them
to correctly parse the vfreq limits.
Note that some combinations of the flags are documented
as "reserved" (as are some other values in the descriptor)
but explicitly checking for those doesn't seem particularly
worthwile since we end up with bogus results whether we
decode them or not.
v2: Increase the storage to u16 to make it work (Jani)
Note the "reserved" values situation (Jani)
v3: Document the EDID version number in the defines
Drop some bogus (u8) casts
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6519
References: https://gitlab.freedesktop.org/drm/intel/-/issues/6484
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220826213501.31490-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Split luminance min/max calculation using static hdr metadata from
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:update_connector_ext_caps
into drm/drm_edid.c and use it during edid parsing. Calculated range is
stored into connector->display_info->luminance_range.
Add new data structure (drm_luminance_range_inf) to store luminance range
calculated using data from EDID's static hdr metadata block. Add this new
struct as a part of drm_display_info struct.
v3: Squashed adding drm_luminance_range_info patch here
v2: Calculate range during edid parsing
Cc: Roman Li <roman.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220719095700.14923-2-jouni.hogander@intel.com
HDMI 2.1 section 10.3.6 defines an HDMI Forum EDID Extension Override
Data Block, which may contain a different extension count than the base
block claims. Add support for reading more EDID data if available. The
extra blocks aren't parsed yet, though.
Hard-coding the EEODB parsing instead of using the iterators we have is
a bit of a bummer, but we have to be able to do this on a partially
allocated EDID while reading it.
v2:
- Check for CEA Data Block Collection size (Ville)
- Amend commit message and comment about hard-coded parsing
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/57b57a355d62eb91ad1e3cf555978576f2bd9fdd.1656494768.git.jani.nikula@intel.com
Unfortunately, there are still plenty of interfaces around that require
a struct edid pointer, and it's impossible to change them all at
once. Add an accessor to the raw EDID data to help the transition.
While there are no such cases now, be defensive against raw EDID
extension count indicating bigger EDID than is actually allocated.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fb55d0b580d556bf2b8e58070239657ac9cb4b2f.1656494768.git.jani.nikula@intel.com
Add a new function drm_edid_connector_update() to replace the
combination of calls drm_connector_update_edid_property() and
drm_add_edid_modes(). Usually they are called in the drivers in this
order, however the former needs information from the latter.
Since the new drm_edid_read*() functions no longer call the connector
updates directly, and the read and update are separated, we'll need this
new function for the connector update.
This is all in drm_edid.c simply to keep struct drm_edid opaque.
v2:
- Share code with drm_connector_update_edid_property() (Ville)
- Add comment about override EDID handling
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/75aa3dbc8c9aa26ebbcdeacd98a466ef8d8827f4.1656494768.git.jani.nikula@intel.com
Add functions drm_edid_override_set() and drm_edid_override_reset() to
support "edid_override" connector debugfs, and to hide the details about
it in drm_edid.c. No functional changes at this time.
Also note in the connector.override_edid flag kernel-doc that this is
only supposed to be modified by the code doing debugfs EDID override
handling. Currently, it is still being modified by amdgpu in
create_eml_sink() and handle_edid_mgmt() for reasons unknown. This was
added in commit 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
and later moved to amdgpu_dm.c in commit e7b07ceef2 ("drm/amd/display:
Merge amdgpu_dm_types and amdgpu_dm").
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8f6b4001630cafac5f44aa5913429ac9979743d2.1656494768.git.jani.nikula@intel.com
Add new functions drm_edid_read(), drm_edid_read_ddc(), and
drm_edid_read_custom() to replace drm_get_edid() and drm_do_get_edid()
for reading the EDID. The transition is expected to happen over a fairly
long time.
Note that the new drm_edid_read*() functions do not do any of the
connector updates anymore. The reading and parsing will be completely
separated from each other.
Add new functions drm_edid_alloc(), drm_edid_dup(), and drm_edid_free()
for allocating and freeing drm_edid containers.
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5a6532a94cad6a79424f6d1918dbe7b7d607ac03.1654674560.git.jani.nikula@intel.com
The CTA Data Block Collection is valid only for CTA extension version
3. In versions 1 and 2, it is a reserved block, which we ignore.
The DTD start offset (byte 2, or d in CTA-861 spec), which determines
the CTA Data Block Collection size, is specified slightly differently
for different versions:
Version 1:
d = offset for the byte following the reserved data block. If no
data is provided in the reserved data block, then d=4. If no DTDs
are provided, then d=0
Version 2:
d = offset for the byte following the reserved data block. If no
data is provided in the reserved data block, then d=4. If d=0, then
no detailed timing descriptors are provided, and no data is provided
in the reserved data block.
Version 3:
d = offset for the byte following the data block collection. If no
data is provided in the data block collection, then d=4. If d=0,
then no detailed timing descriptors are provided, and no data is
provided in the data block collection.
Ever since commit 9e50b9d55e ("drm: edid: Add some bounds checking"),
we've interpreted 0 to mean there are no DTDs but it's all Data
Blocks. Per the spec, Data Blocks are only valid for version 3, where we
should interpret 0 to mean there are no data blocks.
Follow the spec (and hope the EDIDs follow it too).
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2a4c94417f024cbafc5d4ca0a74e4617fc4325d1.1654674560.git.jani.nikula@intel.com
We'll need to propagate drm_edid everywhere. This is a clunky start, but
a start nonetheless. We'll eventually convert all of the EDID parsing to
struct drm_edid.
Initially, we'll just create the struct drm_edid in stack. This will be
the compat layer for legacy struct edid code. In the future, we'll have
EDID read return drm_edid objects.
v2: Add legacy init helper.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/000452fddedbaf7f473ac25d4dde2502e60b8e39.1652097712.git.jani.nikula@intel.com
Introduce new opaque type struct drm_edid to encapsulate the EDID data
and the size allocated for it. The contents will be private to
drm_edid.c.
There are a number of reasons for adding a container around struct edid:
* struct edid is a raw blob pointer to data that usually originates
outside of the kernel. Its size is contained within the structure.
* There's no way to attach meta information (such as allocated memory
size) to struct edid.
* Validation of the EDID blob and its size become crucial, and it's
spread all over the subsystem, with varying levels of accuracy.
* HDMI Forum has introduced an HF-EEODB extension that defines an
override EDID size within an EDID extension. The size allocated for an
EDID depends on whether the allocator understands the HF-EEODB
extension. Given a struct edid *, it's impossible to know how much
memory was actually allocated for it.
There are also some reasons for making the container type struct
drm_edid opaque and private to drm_edid.c:
* Have only one place for creating and parsing the EDID, to avoid
duplicating bugs.
* Prepare for reading a pure DisplayID 2.0 from its own DDC address, and
adding it within the same struct drm_edid container, transparently,
and for all drivers.
* With the idea that the drm_edid objects are immutable during their
lifetimes, it will be possible to refcount them and reduce EDID
copying everywhere (this is left for future work).
Initially, just add the type. In follow-up, we'll start converting the
guts of drm_edid.c to use it, and finally add interfaces around it.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f3ecabd8a219aea678ad00f7bcdecf77b27b3c78.1652097712.git.jani.nikula@intel.com
Convert drm_find_cea_extension() to a predicate function to check if the
EDID has a CTA extension or a DisplayID CTA data block. This is mainly
to avoid adding new users that only find the first CTA extension.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a5bf228942e6bd0fc70d5cf7a14c249a14a7afcd.1651569697.git.jani.nikula@intel.com
The DisplayID CTA data block version does not necessarily match the CTA
revision. Simplify by postponing drm_edid_to_eld() slightly, and reusing
the CTA revision extracted by drm_parse_cea_ext().
By not bailing out early in drm_edid_to_eld() we may end up filling
meaningless data to the ELD. However, the main decision for audio is not
the ELD, but rather drm_detect_monitor_audio() called by drivers.
(Arguably a future cleanup could do that in drm_add_edid_modes() and
cache the result in the connector.)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/163ebbfd765066acbfc267256fb3b67fc711a78d.1651569697.git.jani.nikula@intel.com
Convert drm_find_cea_extension() to EDID block iterator in color format
and CTA revision detection. Detect them in all CTA extensions.
Also parse CTA Data Blocks in DisplayID even if there's no CTA EDID
extension.
v2:
- Don't assume DRM_COLOR_FORMAT_RGB444 support if there's only DisplayID
CTA Data Blocks (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505105242.1198521-1-jani.nikula@intel.com
Iterate through all CTA data blocks across all CTA extensions and
DisplayID data blocks. This may gather more data than before, and if
there's duplicated data, some is overwritten by whichever comes last.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8bdc67aa731857111eddd08a9c192d41d40b5f5a.1651569697.git.jani.nikula@intel.com
Abstract helpers for matching vendor data blocks and extended tags, and
use them to simplify all the cea_db_is_*() functions.
Take void pointer as parameter to allow transitional use for both u8 *
and struct cea_db *.
v2: Remove superfluous parens (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b6bb813afc35c763e744c6cdb4a787da3adf910b.1651569697.git.jani.nikula@intel.com
Find HF-SCDB information in CEA extensions block. And retrieve
Max_TMDS_Character_Rate that support by sink device.
v2: HF-SCDB and HF-VSDBS carry the same SCDS data. Reuse
drm_parse_hdmi_forum_vsdb() to parse this packet.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: intel-gfx <intel-gfx@lists.freedesktop.org>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2bf7110cdb56d5dda311480787faf472c9802de4.1651569697.git.jani.nikula@intel.com
Fix the below drm/edid kernel-doc warnings:
drivers/gpu/drm/drm_edid.c:1589: warning: Function parameter or member '_edid' not described in 'drm_edid_header_is_valid'
drivers/gpu/drm/drm_edid.c:1589: warning: Excess function parameter 'raw_edid' description in 'drm_edid_header_is_valid'
drivers/gpu/drm/drm_edid.c:1737: warning: Function parameter or member '_block' not described in 'drm_edid_block_valid'
drivers/gpu/drm/drm_edid.c:1737: warning: Excess function parameter 'raw_edid' description in 'drm_edid_block_valid'
drivers/gpu/drm/drm_edid.c:2136: warning: Function parameter or member 'read_block' not described in 'drm_do_get_edid'
drivers/gpu/drm/drm_edid.c:2136: warning: Function parameter or member 'context' not described in 'drm_do_get_edid'
drivers/gpu/drm/drm_edid.c:2136: warning: Excess function parameter 'get_edid_block' description in 'drm_do_get_edid'
drivers/gpu/drm/drm_edid.c:2136: warning: Excess function parameter 'data' description in 'drm_do_get_edid'
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
References: https://lore.kernel.org/r/20220406154431.567414c3@canb.auug.org.au
References: https://lore.kernel.org/r/20220420162431.2b28ddea@canb.auug.org.au
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20220426091913.1339941-1-jani.nikula@intel.com
SCDC is the Status and Control Data Channel for HDMI. Move the SCDC
helpers into display/ and split the header into files for core and
helpers. Update all affected drivers. No functional changes.
To avoid the proliferation of Kconfig options, SCDC is part of DRM's
support for HDMI. If necessary, a new option could make SCDC an
independent feature.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-9-tzimmermann@suse.de
Move DRM's HMDI helpers into the display/ subdirectoy and add it
to DRM's display helpers. Update all affected drivers. No functional
changes.
The HDMI helpers were implemented in the EDID and connector code, but
are actually unrelated. With the move to the display-helper library, we
can remove the dependency on drm_edid.{c,h} in some driver's HDMI source
files.
Several of the HDMI helpers remain in EDID code because both share parts
of their implementation internally. With better refractoring of the EDID
code, those HDMI helpers could be moved into the display-helper library
as well.
v3:
* fix Kconfig dependencies (Javier)
v2:
* reduce HDMI helpers to avoid exporting functions (Jani)
* fix include statements (Jani, Javier)
* update Kconfig symbols
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-8-tzimmermann@suse.de
Add some helpers to figure out the EDID extension block count, block
count, size, pointers to blocks.
Unfortunately, we'll need to cast away the const in a few places where
we actually need to access the data.
v3: fix (!edid_extension_block_count(edid) == 0) (kernel test robot)
v2: fix s/j/i/ introduced in a rebase
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/dc7b0850293d837439fb3914c8a9d81e39018b4b.1649685475.git.jani.nikula@intel.com
Convert drm_do_get_edit() from the base block read helper to the generic
block read helper. There's quite a bit going on here, as the corrupt and
null EDID information is moved back to the caller. As we see, they were
not all that clear to begin with, and this change underlines that.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3bcf98453770757ee93386da0cfbc6552d42a312.1649685475.git.jani.nikula@intel.com
We have an abstraction for the EDID base block read, yet duplicating the
retries and error handling for extension block reads. Introduce a more
generic EDID block read helper.
Switch to the helper piecemeal, starting with drm_edid_get_panel_id(),
which doesn't need or have access to the connector anyway.
The subtle change is switching from drm_edid_block_valid() to
edid_block_check(). We also status print once, not for every attempt.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/47560f7530e4a7b32b56cb9038178244fe30a4af.1649685475.git.jani.nikula@intel.com
Split out a function to log EDID block status. The printouts get changed
slightly.
Unfortunately, not all users will have struct drm_device available, so
we convert to pr_* debug logging instead of drm device based logging.
v2: Complain more loudly about unknown status codes (Ville)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/98d12db95e55e2e18548822078ec3b16ae006732.1649685475.git.jani.nikula@intel.com
Initialize on-stack modes with drm_mode_init() to guarantee
no stack garbage in the list head, or that we aren't copying
over another mode's list head.
Based on the following cocci script, with manual fixups:
@decl@
identifier M;
expression E;
@@
- struct drm_display_mode M = E;
+ struct drm_display_mode M;
@@
identifier decl.M;
expression decl.E;
statement S, S1;
@@
struct drm_display_mode M;
... when != S
+ drm_mode_init(&M, &E);
+
S1
@@
expression decl.E;
@@
- &*E
+ E
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-22-ville.syrjala@linux.intel.com
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
There's no need to handle complicated scenarios or debug log when
filtering blocks that have already been identified as invalid. Simplify
by adding an edid_block_valid() helper that operates on const data and
prints nothing.
(Finally, here's the justification for the previously added separate
edid_block_status_valid() function!)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/aa25131c3454c7dbc1e8fdb46549f3787bdf6354.1648752228.git.jani.nikula@intel.com
Add edid_block_check() that only checks the EDID block validity, without
any actions. Turns out it's simple and crystal clear.
Rewrite drm_edid_block_valid() around it, keeping all the functionality
fairly closely the same, warts and all. Turns out it's incredibly
complicated for a function you'd expect to be simple, with all the
fixing and printing and special casing. (Maybe we'll want to simplify it
in the future.)
To slightly simplify, drop the warning for EDID minor revisions > 4.
v2:
- Fix edid_fixup clamp (Ville)
- s/base/is_base_block/ (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b7d108b69acccb7dccbdecc0ca06c2b3ca2e33ca.1648752228.git.jani.nikula@intel.com
Have two clear functions, one to compute the checksum over the EDID, and
another to get the checksum from the EDID. Throw away the diff function.
Ditch the drm_ prefix for static functions, and accept const void * to
help transition to struct edid * usage.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/36641401c8eb0e403c0e33365ff4ad9a28f9fd4a.1648752228.git.jani.nikula@intel.com