Pull sound updates from Takashi Iwai:
"The majority of changes at this time were about ASoC with a lot of
code refactoring works. From the functionality POV, there isn't much
to see, but we have a wide range of device-specific fixes and updates.
Here are some highlights:
- Continued ASoC API cleanup work, spanned over many files
- Added a SoundWire SCDA generic class driver with regmap support
- Enhancements and fixes for Cirrus, Intel, Maxim and Qualcomm.
- Support for ASoC Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830
- Usual HD-audio and USB-audio quirks and fixups
- Support for Onkyo SE-300PCIE, TASCAM IF-FW/DM MkII
Some gpiolib changes for shared GPIOs are included along with this PR
for covering ASoC drivers changes"
* tag 'sound-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (739 commits)
ALSA: hda/realtek: Add PCI SSIDs to HP ProBook quirks
ALSA: usb-audio: Simplify with usb_endpoint_max_periodic_payload()
ALSA: hda/realtek: fix mute/micmute LEDs don't work for more HP laptops
ALSA: rawmidi: Fix inconsistent indenting warning reported by smatch
ALSA: dice: fix buffer overflow in detect_stream_formats()
ASoC: codecs: Modify awinic amplifier dsp read and write functions
ASoC: SDCA: Fixup some more Kconfig issues
ASoC: cs35l56: Log a message if firmware is missing
ASoC: nau8325: Delete a stray tab
firmware: cs_dsp: Add test cases for client_ops == NULL
firmware: cs_dsp: Don't require client to provide a struct cs_dsp_client_ops
ASoC: fsl_micfil: Set channel range control
ASoC: fsl_micfil: Add default quality for different platforms
ASoC: intel: sof_sdw: Add codec_info for cs42l45
ASoC: sdw_utils: Add cs42l45 support functions
ASoC: intel: sof_sdw: Add ability to have auxiliary devices
ASoC: sdw_utils: Move codec_name to dai info
ASoC: sdw_utils: Add codec_conf for every DAI
ASoC: SDCA: Add terminal type into input/output widget name
ASoC: SDCA: Align mute controls to ALSA expectations
...
Pull printk updates from Petr Mladek:
- Allow creaing nbcon console drivers with an unsafe write_atomic()
callback that can only be called by the final nbcon_atomic_flush_unsafe().
Otherwise, the driver would rely on the kthread.
It is going to be used as the-best-effort approach for an
experimental nbcon netconsole driver, see
https://lore.kernel.org/r/20251121-nbcon-v1-2-503d17b2b4af@debian.org
Note that a safe .write_atomic() callback is supposed to work in NMI
context. But some networking drivers are not safe even in IRQ
context:
https://lore.kernel.org/r/oc46gdpmmlly5o44obvmoatfqo5bhpgv7pabpvb6sjuqioymcg@gjsma3ghoz35
In an ideal world, all networking drivers would be fixed first and
the atomic flush would be blocked only in NMI context. But it brings
the question how reliable networking drivers are when the system is
in a bad state. They might block flushing more reliable serial
consoles which are more suitable for serious debugging anyway.
- Allow to use the last 4 bytes of the printk ring buffer.
- Prevent queuing IRQ work and block printk kthreads when consoles are
suspended. Otherwise, they create non-necessary churn or even block
the suspend.
- Release console_lock() between each record in the kthread used for
legacy consoles on RT. It might significantly speed up the boot.
- Release nbcon context between each record in the atomic flush. It
prevents stalls of the related printk kthread after it has lost the
ownership in the middle of a record
- Add support for NBCON consoles into KDB
- Add %ptsP modifier for printing struct timespec64 and use it where
possible
- Misc code clean up
* tag 'printk-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (48 commits)
printk: Use console_is_usable on console_unblank
arch: um: kmsg_dump: Use console_is_usable
drivers: serial: kgdboc: Drop checks for CON_ENABLED and CON_BOOT
lib/vsprintf: Unify FORMAT_STATE_NUM handlers
printk: Avoid irq_work for printk_deferred() on suspend
printk: Avoid scheduling irq_work on suspend
printk: Allow printk_trigger_flush() to flush all types
tracing: Switch to use %ptSp
scsi: snic: Switch to use %ptSp
scsi: fnic: Switch to use %ptSp
s390/dasd: Switch to use %ptSp
ptp: ocp: Switch to use %ptSp
pps: Switch to use %ptSp
PCI: epf-test: Switch to use %ptSp
net: dsa: sja1105: Switch to use %ptSp
mmc: mmc_test: Switch to use %ptSp
media: av7110: Switch to use %ptSp
ipmi: Switch to use %ptSp
igb: Switch to use %ptSp
e1000e: Switch to use %ptSp
...
When compiled with -ffunction-sections (e.g., for LTO, livepatch, dead
code elimination, AutoFDO, or Propeller), the startup() function gets
compiled into the .text.startup section (or in some cases
.text.startup.constprop.0 or .text.startup.isra.0).
However, the .text.startup and .text.startup.* sections are also used by
the compiler for __attribute__((constructor)) code.
This naming conflict causes the vmlinux linker script to wrongly place
startup() function code in .init.text, which gets freed during boot.
Some builds have a mix of objects, both with and without
-ffunctions-sections, so it's not possible for the linker script to
disambiguate with #ifdef CONFIG_FUNCTION_SECTIONS or similar. This
means that "startup" unfortunately needs to be prohibited as a function
name.
Rename startup() to gc2235_startup().
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/d28103a6edf7beceb5e3c6fa24e49dbad1350389.1763669451.git.jpoimboe@kernel.org
When compiling the kernel with -ffunction-sections (e.g., for LTO,
livepatch, dead code elimination, AutoFDO, or Propeller), the startup()
function gets compiled into the .text.startup section. In some cases it
can even be cloned into .text.startup.constprop.0 or
.text.startup.isra.0.
However, the .text.startup and .text.startup.* section names are already
reserved for use by the compiler for __attribute__((constructor)) code.
This naming conflict causes the vmlinux linker script to wrongly place
startup() function code in .init.text, which gets freed during boot.
Fix that by renaming startup() to ov2722_startup().
Fixes: 6568f14cb5 ("vmlinux.lds: Exclude .text.startup and .text.exit from TEXT_MAIN")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: live-patching@vger.kernel.org
Cc: Hans de Goede <hansg@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://patch.msgid.link/bf8cd823a3f11f64cc82167913be5013c72afa57.1762991150.git.jpoimboe@kernel.org
Linux 6.18-rc5
* tag 'v6.18-rc5': (1016 commits)
Linux 6.18-rc5
kbuild: Let kernel-doc.py use PYTHON3 override
rtc: rx8025: fix incorrect register reference
Revert "drm/nouveau: set DMA mask before creating the flush page"
io_uring: fix regbuf vector size truncation
compiler_types: Move unused static inline functions warning to W=2
smb: client: validate change notify buffer before copy
tracing/tools: Fix incorrcet short option in usage text for --threads
drm/xe: Enforce correct user fence signaling order using
x86/microcode/AMD: Add more known models to entry sign checking
drm/xe: Do clean shutdown also when using flr
drm/xe: Move declarations under conditional branch
drm/xe/guc: Synchronize Dead CT worker with unbind
tracing: Fix memory leaks in create_field_var()
ring-buffer: Do not warn in ring_buffer_map_get_reader() when reader catches up
tracing: tprobe-events: Fix to put tracepoint_user when disable the tprobe
tracing: tprobe-events: Fix to register tracepoint correctly
gpio: tb10x: Drop unused tb10x_set_bits() function
drm/amd/display: Enable mst when it's detected but yet to be initialized
drm/amdgpu: Fix wait after reset sequence in S3
...
The vbi_fops stored in struct saa7146_ext_vv is a full
v4l2_file_operations, but only its .write field is used. Replace it with
a single vbi_write function pointer to save memory.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Until now, all products with an amplifier supported by the cs35l56 driver
have shipped with Microsoft Windows pre-installed. The factory calibration
of speaker protection has therefore been done using the Windows driver.
However, products that ship with a Linux-based distro must be able to
perform the factory calibration procedure from within the Linux-based
environment. This patch series adds that support.
NOTE: unfortunately this is yet another series that is mainly ASoC but
also needs some changes to the HDA driver, and they have build dependencies
on the ASoC code. I suggest taking this all through Mark's tree and we'll
avoid sending any other commits to the HDA driver until it has all landed
in Takashi's tree.
We have very similar name functions (A)(B). Both gets component from
snd_kcontrol, but (A) is used in callback functions which is registered
through snd_soc_add_component_controls(), (B) is used through
snd_soc_dapm_new_widgets().
(A) snd_soc_kcontrol_component()
(B) snd_soc_dapm_kcontrol_component()
(B) is using very picky way to get component but using it is necessary in
ASoC. But (A) is just wrapper function to snd_kcontrol_chip(), and directly
using it without wrapper is very common way on ALSA.
To reduce confusions of similar function, let's use common way on (A).
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87tt02t8s1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The v4l2_m2m_buf_copy_metadata() function takes a boolean
copy_frame_flags argument. When true, it causes the function to copy the
V4L2_BUF_FLAG_KEYFRAME, V4L2_BUF_FLAG_BFRAME and V4L2_BUF_FLAG_PFRAME
flags from the output buffer to the capture buffer.
There is no use cases in any upstream driver for copying the flags.
KEY/P/B frames are properties of the bitstream buffer in some formats.
Once decoded, this is no longer a property of the video frame and should
be discarded.
It was considered useful to know if an uncompressed frame was decoded
from a KEY/P/B compressed frame, and to preserve that information if
that same uncompressed frame was passed through another M2M device (e.g.
a scaler). However, the V4L2 documentation makes it clear that the flags
are meant for compressed frames only.
Drop the copy_frame_flags argument from v4l2_m2m_buf_copy_metadata().
The change to drivers was performed with the following Coccinelle
semantic patch:
@@
expression src;
expression dst;
expression flag;
@@
- v4l2_m2m_buf_copy_metadata(src, dst, flag);
+ v4l2_m2m_buf_copy_metadata(src, dst);
include/media/v4l2-mem2mem.h and drivers/media/v4l2-core/v4l2-mem2mem.c
have been updated manually.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./ipu7/ipu7-isys-csi-phy.c:311:23-30: WARNING: Consider using %pe to print PTR_ERR()
./ipu7/ipu7-isys-csi2.c:59:22-29: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().
This patch fixes this cocci report:
./ipu3/ipu3.c:534:5-12: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The dev_err_probe() doesn't do anything when error is '-ENOMEM'.
Therefore, remove the useless call to dev_err_probe(), and just
return the value instead.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Fix the following checkpatch warning:
av7110_ca.c:29: WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
Signed-off-by: Osama Albahrani <osalbahr@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The fmh_gpib driver contains a device reference count leak in
fmh_gpib_attach_impl() where driver_find_device() increases the
reference count of the device by get_device() when matching but this
reference is not properly decreased. Add put_device() in
fmh_gpib_detach(), which ensures that the reference count of the
device is correctly managed.
Found by code review.
Cc: stable <stable@kernel.org>
Fixes: 8e4841a088 ("staging: gpib: Add Frank Mori Hess FPGA PCI GPIB driver")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the ATN (Attention) line is asserted during a read we get a
NIUSB_ATN_STATE_ERROR during a read. For the controller to send a
device clear it asserts ATN. Normally this is an error but in the case
of a device clear it should be regarded as an interrupt.
Return -EINTR when the Device Clear Active State (DCAS) is entered
else signal an error with dev_dbg with status instead of just dev_err.
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver was not sending device clear or trigger events when the
board entered the DCAS or DTAS state respectively in device mode.
DCAS is the Device Clear Active State which is entered on receiving a
selective device clear message (SDC) or universal device clear message
(DCL) from the controller in charge.
DTAS is the Device Trigger Active State which is entered on receiving
a group execute trigger (GET) message from the controller.
In order for an application, implementing a particular device, to
detect when one of these states is entered the driver needs to send
the appropriate event.
Send the appropriate gpib_event when DCAS or DTAS is set in the
reported status word. This sets the DCAS or DTAS bits in the board's
status word which can be monitored by the application.
Fixes: 4e127de14f ("staging: gpib: Add National Instruments USB GPIB driver")
Cc: stable <stable@kernel.org>
Tested-by: Dave Penkler <dpenkler@gmail.com>
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
EOI (End Or Identify) is a hardware line on the GPIB bus that can be
asserted with the last byte of a message to indicate the end of the
transfer to the receiving device.
In this driver, a write with send_eoi true is done in 3 parts:
Send first byte directly
Send remaining but 1 bytes using the fifo
Send the last byte directly with EOI asserted
The first byte in a write is always sent by writing to the tms9914
chip directly to setup for the subsequent fifo transfer. We were not
checking for a 1 byte write with send_eoi true resulting in EOI not
being asserted. Since the fifo transfer was not executed
(fifotransfersize == 0) the retval in the test after the fifo transfer
code was still 1 from the preceding direct write. This caused it to
return without executing the final direct write which would have sent
an unsollicited extra byte.
For a 2 byte message the first byte was sent directly. But since the
fifo transfer was not executed (fifotransfersize == 1) and the retval
in the test after the fifo transfer code was still 1 from the
preceding first byte write it returned before the final direct byte
write with send_eoi true. The second byte was then sent as a separate
1 byte write to complete the 2 byte write count again without EOI
being asserted as above.
Only send the first byte directly if more than 1 byte is to be
transferred with send_eoi true.
Also check for retval < 0 for the error return in case the fifo code
is not used (1 or 2 byte message with send_eoi true).
Fixes: 09a4655ee1 ("staging: gpib: Add HP/Agilent/Keysight 8235xx PCI GPIB driver")
Cc: stable <stable@kernel.org>
Tested-by: Dave Penkler <dpenkler@gmail.com>
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull staging driver fixes from Greg KH:
"Here are some staging driver fixes that missed 6.17-final due to my
travel schedule. They fix a number of reported issues in the axis-fifo
driver, one of which was just independently discovered by someone else
today so someone is looking at this code.
All of these fixes have been in linux-next for many weeks with no
reported issues"
* tag 'staging-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: axis-fifo: flush RX FIFO on read errors
staging: axis-fifo: fix TX handling on copy_from_user() failure
staging: axis-fifo: fix maximum TX packet length check
Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.
Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.
Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust.
This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.
The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.
All of these have been in linux-next for a while"
* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...
Pull staging driver updates from Greg KH:
"Here is the 'big' set of staging driver changes for 6.18-rc1. Nothing
really exciting in here they pretty much consist of:
- minor coding style changes and cleanups
- some api layer removals where not needed
Overall a quiet development cycle.
All have been in linux-next for a while with no reported issues"
* tag 'staging-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (63 commits)
staging: rtl8723bs: xmit: rephrase comment and drop extra space
staging: sm750fb: rename camel case variable
staging: rtl8723bs: hal: put return type and function name on one line
staging: rtl8723bs: fix typo in comment
staging: sm750fb: rename snake case variables
staging: sm750fb: remove unnecessary volatile qualifiers
staging: rtl8723bs: rtw_efuse.h: simplify copyright banner
staging: rtl8723bs: remove unused tables
staging: rtl8723bs: Hal_EfuseParseAntennaDiversity_8723B is empty
staging: rtl8723bs: remove REG_EFUSE_ACCESS_8723 and EFUSE_ACCESS_ON_8723
staging: rtl8723bs: remove bWrite from Hal_EfusePowerSwitch
staging: rtl8723bs: remove wrapper Efuse_PowerSwitch
staging: octeon: Clean up dead code in ethernet-tx.c
staging: rtl8723bs: fix fortify warnings by using struct_group
staging: gpib: use int type to store negative error codes
staging: rtl8723bs: remove include/recv_osdep.h
staging: rtl8723bs: remove os_dep/recv_linux.c
staging: rtl8723bs: rename rtw_os_recv_indicate_pkt
staging: rtl8723bs: move rtw_os_recv_indicate_pkt to rtw_recv.c
staging: rtl8723bs: rename rtw_os_alloc_msdu_pkt
...
Pull networking updates from Paolo Abeni:
"Core & protocols:
- Improve drop account scalability on NUMA hosts for RAW and UDP
sockets and the backlog, almost doubling the Pps capacity under DoS
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance
by an additional 50%, even more under extreme conditions
- Add support for PSP encryption of TCP connections; this mechanism
has some similarities with IPsec and TLS, but offers superior HW
offloads capabilities
- Ongoing work to support Accurate ECN for TCP. AccECN allows more
than one congestion notification signal per RTT and is a building
block for Low Latency, Low Loss, and Scalable Throughput (L4S)
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath
- Refactor skb deferral free to better scale on large multi-NUMA
hosts, this improves TCP and UDP RX performances significantly on
such HW
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds
- Improve handling of setups with a large number of nexthop, making
dump operating scaling linearly and avoiding unneeded
synchronize_rcu() on delete
- Improve bridge handling of VLAN FDB, storing a single entry per
bridge instead of one entry per port; this makes the dump order of
magnitude faster on large switches
- Restore IP ID correctly for encapsulated packets at GSO
segmentation time, allowing GRO to merge packets in more scenarios
- Improve netfilter matching performance on large sets
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting
recent TCP autotuning changes
- Allow bridges to redirect to a backup port when the bridge port is
administratively down
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups
- Add RCU safety to dst->dev, closing a lot of possible races
- A significant crypto library API for SCTP, MPTCP and IPv6 SR,
reducing code duplication
- Supports pulling data from an skb frag into the linear area of an
XDP buffer
Things we sprinkled into general kernel code:
- Generate netlink documentation from YAML using an integrated YAML
parser
Driver API:
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection
- Introduce API for fetching the DMA device for a given queue,
allowing TCP zerocopy RX on more H/W setups
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath
- Add a new dedicated ethtool callback enabling drivers to provide
the number of RX rings directly, improving efficiency and clarity
in RX ring queries and RSS configuration
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause
- Support for DPLL phase offset exponential moving average,
controlling the average smoothing factor
Device drivers:
- Add a new Huawei driver for 3rd gen NIC (hinic3)
- Add a new SpacemiT driver for K1 ethernet MAC
- Add a generic abstraction for shared memory communication
devices (dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention
issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link
aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level
checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages
to improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4):
- support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory
usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k):
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"
* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
net: stmmac: Add support for Allwinner A523 GMAC200
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Revert "Documentation: net: add flow control guide and document ethtool API"
octeontx2-pf: fix bitmap leak
octeontx2-vf: fix bitmap leak
net/mlx5e: Use extack in set rxfh callback
net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
net/mlx5e: Introduce mlx5e_rss_init_params
net/mlx5e: Remove unused mdev param from RSS indir init
net/mlx5: Improve QoS error messages with actual depth values
net/mlx5e: Prevent entering switchdev mode with inconsistent netns
net/mlx5: HWS, Generalize complex matchers
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
selftests/net: add tcp_port_share to .gitignore
Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
net: add NUMA awareness to skb_attempt_defer_free()
net: use llist for sd->defer_list
net: make softnet_data.defer_count an atomic
selftests: drv-net: psp: add tests for destroying devices
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
...
If copy_from_user() fails, write() currently returns -EFAULT, but any
partially written data leaves the TX FIFO in an inconsistent state.
Subsequent write() calls then fail with "transmit length mismatch"
errors.
Once partial data is written to the hardware FIFO, it cannot be removed
without a TX reset. Commit c6e8d85faf ("staging: axis-fifo: Remove
hardware resets for user errors") removed a full FIFO reset for this case,
which fixed a potential RX data loss, but introduced this TX issue.
Fix this by introducing a bounce buffer: copy the full packet from
userspace first, and write to the hardware FIFO only if the copy
was successful.
Fixes: c6e8d85faf ("staging: axis-fifo: Remove hardware resets for user errors")
Cc: stable@vger.kernel.org
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Link: https://lore.kernel.org/r/20250912101322.1282507-1-ovidiu.panait.oss@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PM usage counter of isys was bumped up when start camera stream
(opening firmware) but it was not dropped after stream stop(closing
firmware), it forbids system fail to suspend due to the wrong PM state
of ISYS. This patch drop the PM usage counter in firmware close to fix
it.
Cc: Stable@vger.kernel.org
Fixes: a516d36bdc ("media: staging/ipu7: add IPU7 input system device driver")
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The macros REG_EFUSE_ACCESS_8723 and EFUSE_ACCESS_ON_8723 are redundant,
both are already defined in header files without the _8723 suffix. Remove
them and use the marcos from the header files.
rtl8723b_hal.h:138:
#define EFUSE_ACCESS_ON 0x69 /* For RTL8723 only. */
hal_com_reg.h:35:
#define REG_EFUSE_ACCESS 0x00CF /* Efuse access protection for RTL8723 */
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Trendbook Next 14
Link: https://lore.kernel.org/r/20250824095830.79233-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix fortify_memcpy_chk warnings in rtw_BIP_verify() and
rtw_mgmt_xmitframe_coalesce() functions by using struct_group
to access consecutive address fields.
Changed memcpy calls to use &hdr->addrs instead of hdr->addr1
when copying 18 bytes (addr1 + addr2 + addr3).
This resolves 'detected read beyond size of field' warnings
by using the proper struct_group mechanism as suggested by
the compiler.
Signed-off-by: yingche <zxcv2569763104@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20250829040906.895221-1-zxcv2569763104@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
