When running in the now default parallel mode this test has been
frequently failing, while when running exclusively, on a quiet system,
it passes.
Since its expectations were established when serial testing was the
norm, mark it as exclusive to get this kind of resunt:
root@x1:~# perf test 106
106: perf script task-analyzer tests : Ok
root@x1:~# set -o vi
root@x1:~# perf stat --null --repeat 10 perf test 106
106: perf script task-analyzer tests : Ok
106: perf script task-analyzer tests : Ok
106: perf script task-analyzer tests : Ok
106: perf script task-analyzer tests : Ok
106: perf script task-analyzer tests : Ok
106: perf script task-analyzer tests : Ok
106: perf script task-analyzer tests : Ok
106: perf script task-analyzer tests : Ok
106: perf script task-analyzer tests : Ok
106: perf script task-analyzer tests : Ok
Performance counter stats for 'perf test 106' (10 runs):
4.8872 +- 0.0179 seconds time elapsed ( +- 0.37% )
root@x1:~#
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After binutils commit e43d876 which was first included in binutils 2.41,
riscv no longer supports dumping in the middle of instructions.
Increase the objdump window by 2-bytes to ensure that any instruction
that sits on the boundary of the specified stop-address is not cut in
half.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20241219-perf_fix_riscv_obj_reading-v3-1-a7d644dcfa50@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that printing metric-value and metric-unit is optional,
print_running_json() shouldn't add the comma in case it becomes
trailing.
Replace all manual JSON comma stuff with a json_out() function that uses
the existing os->first tracking and auto inserts a comma if it's needed.
Update the test to handle that two of the fields can be missing.
This fixes the following test failure on Cortex A57 where the branch
misses metric is missing a required event:
$ perf test -vvv "json output"
106: perf stat JSON output linter:
--- start ---
test child forked, pid 665682
Checking json output: no args Test failed for input:
{"counter-value" : "3112.000000", "unit" : "",
"event" : "armv8_pmuv3_1/branch-misses/",
"event-runtime" : 20699340, "pcnt-running" : 100.00, }
...
json.decoder.JSONDecodeError: Expecting property name enclosed in
double quotes: line 12 column 144 (char 2109)
---- end(-1) ----
106: perf stat JSON output linter : FAILED!
Fixes: e1cc918b6c ("perf stat: Drop metric-unit if unit is NULL")
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20241112160048.951213-2-james.clark@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, we only have 'perf trace' augmentation tests for enum
arguments. This patch adds tests for more general syscall arguments,
such as struct pointers, strings, and buffers.
These tests utilize the 'perf config' system to configure 'the perf trace'
output, as suggested by Arnaldo Carvalho de Melo <acme@kernel.org>.
Committer testing:
root@number:~# perf test "BTF general"
109: perf trace BTF general tests : Ok
root@number:~# perf test -v "BTF general"
109: perf trace BTF general tests : Ok
root@number:~# perf test -vv "BTF general"
109: perf trace BTF general tests:
--- start ---
test child forked, pid 1410451
Checking if vmlinux BTF exists
Testing perf trace's string augmentation
Testing perf trace's buffer augmentation
Testing perf trace's struct augmentation
---- end(0) ----
109: perf trace BTF general tests : Ok
root@number:~#
It still fails sometimes, for instance when tested with:
root@number:~# perf stat --null -r 10 perf test "BTF general"
109: perf trace BTF general tests : Ok
109: perf trace BTF general tests : Ok
109: perf trace BTF general tests : Ok
109: perf trace BTF general tests : Ok
109: perf trace BTF general tests : FAILED!
109: perf trace BTF general tests : Ok
109: perf trace BTF general tests : Ok
109: perf trace BTF general tests : FAILED!
109: perf trace BTF general tests : Ok
109: perf trace BTF general tests : Ok
Performance counter stats for 'perf test BTF general' (10 runs):
2.148 +- 0.293 seconds time elapsed ( +- 13.63% )
root@number:~#
But we can go on from here and fix things up with followup patches.
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20241215190712.787847-2-howardchu95@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
stat_config is accessed by config.c via helper functions, but declared
in builtin-stat. Move to util/config.c so that stub functions aren't
needed in python.c which doesn't link against the builtin files.
To avoid name conflicts change builtin-script to use the same
stat_config as builtin-stat. Rename local variables in tests to avoid
shadow declaration warnings.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20241119011644.971342-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a simple sub-test to the "Miscellaneous Intel PT testing" test to
check pause / resume.
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241216070244.14450-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently print_overall_results prints the number of fails in the
summary, example from base_probe tests in testsuite_probe:
## [ FAIL ] ## perf_probe :: test_invalid_options SUMMARY ::
11 failures found
test_invalid_options contains multiple tests and out of that 11 failed.
Sometimes it could happen that it is due to missing dependency in the
build or environment dependency.
Example, perf probe -L requires DWARF enabled. otherwise
it fails as below:
./perf probe -L
Error: switch `L' is not available because NO_DWARF=1
"-L" is tested as one of the option in:
for opt in '-a' '-d' '-L' '-V'; do
<<perf probe test>>
print_results $PERF_EXIT_CODE $CHECK_EXIT_CODE "missing argument
for $opt"
Here -a and -d doesn't require DWARF. Similarly there are few other
tests requiring DWARF.
To hint the user that missing DWARF could be one issue, update
print_overall_results to print a comment string along with summary
hinting the possible cause. Update test_invalid_options.sh and
test_line_semantics.sh to pass the info about DWARF requirement since
these tests failed when perf is built without DWARF.
Use the check for presence of DWARF with "perf check feature" and append
the hint message based on the result.
With the change:
## [ FAIL ] ## perf_probe :: test_invalid_options SUMMARY ::
11 failures found :: Some of the tests need DWARF to run
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20241206135254.35727-1-atrajeev@linux.vnet.ibm.com
[ Minor edits changing "dwarf" to "DWARF" as its an acronym ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This test was failing when run with the default 'perf test' mode, which
is to run multiple regression tests in parallel.
Since it checks system_wide mode, set it to run in exclusive mode.
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/lkml/Z1yPYqYYs_isO1PJ@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A variant of DEFINE_SUITE() but sets ->exclusive bit for the test so the
test will be executed sequentially.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20241210093449.1662-10-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The return value from the call to readlink() is ssize_t. However, the
return value is being assigned to an size_t variable 'len', so making
'len' an ssize_t.
./tools/perf/tests/tests-scripts.c:182:5-8: WARNING: Unsigned expression compared with zero: len < 0.
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=11909
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241115091527.128923-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf stat' output on aarch64 machines with topdown events wasn't
counted for in the 'perf stat STD output linter' test case. Add the
topdown metric to the skip_metric list as it is done for topdown events
on other systems.
The Topdown events are also disabled on aarch64 KVM guests because the
value of caps/slots is set to 0 due to the part of the system register
being a stub.
This prevents the metric for the topdown events from being computed,
leaving the 'perf stat' topdown metric without any value at all.
Add the "TopdownL1" to the skip_metric list as well to handle this
possibility.
Before aarch64:
100: perf stat STD output linter:
--- start ---
test child forked, pid 403305
Checking STD output: no args Unknown event name in TopdownL1 # 4.3 percent of slots slots_lost_misspeculation_fraction
---- end(-1) ----
100: perf stat STD output linter : FAILED!
Before aarch64 KVM:
100: perf stat STD output linter:
--- start ---
test child forked, pid 404671
Checking STD output: no args Unknown event name in TopdownL1
---- end(-1) ----
100: perf stat STD output linter : FAILED!
After:
100: perf stat STD output linter:
--- start ---
test child forked, pid 404777
Checking STD output: no args [Success]
Checking STD output: system wide [Success]
Checking STD output: interval [Success]
Checking STD output: per thread [Success]
Checking STD output: per node [Success]
Checking STD output: system wide no aggregation [Success]
Checking STD output: per core [Success]
Checking STD output: per cache instance [Success]
Checking STD output: per cluster [Success]
Checking STD output: per die [Success]
Checking STD output: per socket [Success]
---- end(0) ----
100: perf stat STD output linter : Ok
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20241029144347.25651-1-vmolnaro@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The temp directory is made and a known fake hwmon PMU created within
it. Prior to this fix the events were being incorrectly written to the
temp directory rather than the fake PMU directory. This didn't impact
the test as the directory fd matched the wrong location, but it
doesn't mirror what a hwmon PMU would actually look like.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/r/20241206042306.1055913-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The temp directory is made and a known fake hwmon PMU created within
it. Prior to this fix the events were being incorrectly written to the
temp directory rather than the fake PMU directory. This didn't impact
the test as the directory fd matched the wrong location, but it
doesn't mirror what a hwmon PMU would actually look like.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241206042306.1055913-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tracepoint parsing required libtraceevent but no longer does. Remove
the Build logic and #ifdefs that caused the tests not to be run. Test
code that directly uses libtraceevent is still guarded.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Zixian Cai <fzczx123@gmail.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241118225345.889810-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By introducing a tools/perf/util/btf.c to collect utilities not yet
available via libbpf, the first being a way to find a member by name
once we get the type_id for the struct.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For the CPU map merging test, add an extra check for the reference
counter before releasing the last CPU map.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241107125308.41226-4-leo.yan@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add additional tests for CPU map merging to cover more cases.
These tests include different types of arguments, such as when one CPU
map is a subset of another, as well as cases with or without overlap
between the two maps.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241107125308.41226-3-leo.yan@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_cpu_map__merge() function has two arguments, 'orig' and
'other'. The function definition might cause confusion as it could give
the impression that the CPU maps in the two arguments are copied into a
new allocated structure, which is then returned as the result.
The purpose of the function is to merge the CPU map 'other' into the CPU
map 'orig'. This commit changes the 'orig' argument to a pointer to
pointer, so the new result will be updated into 'orig'.
The return value is changed to an int type, as an error number or 0 for
success.
Update callers and tests for the new function definition.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241107125308.41226-2-leo.yan@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This signal handler loops over all tests on ctrl-C, but it's active
while the test list is being constructed. process.pid is 0, then -1,
then finally set to the child pid on fork. If the Ctrl-C is received
during this point a kill(-1, SIGINT) can be sent which affects all
processes.
Make sure the child has forked first before forwarding the signal. This
can be reproduced with ctrl-C immediately after launching perf test
which terminates the ssh connection.
Fixes: 553d5efeb3 ("perf test: Add a signal handler to kill forked child processes")
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241129151948.3199732-1-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Incorrectly the hwmon with PMU name test didn't pass "true". Fix and
address issue with hwmon_pmu__config_terms needing to load events - a
load bearing assert fired. Also fix missing list deletion when putting
the hwmon test PMU and lower some debug warnings to make the hwmon PMU
less spammy in verbose mode.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241121000955.536930-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
In the error path when failing to parse events the evlist is being
deleted twice, keep the one after the out label.
Fixes: 531ee0fd48 ("perf test: Add hwmon "PMU" test")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/ZzzoJNNcJJVnPCCe@x1
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
On s390 the perf test case ftrace sometimes fails as follows:
# ./perf test ftrace
79: perf ftrace tests : FAILED!
#
The failure depends on the kernel .config file. Some configurations
always work fine, some do not. The ftrace profile test mostly fails,
because the ring buffer was not large enough, and some lines
(especially the interesting ones with nanosleep in it) where dropped.
To achieve success for all tested kernel configurations, enlarge
the buffer to store the traces completely without wrapping.
The default buffer size is too small for all kernel configurations.
Set the buffer size of for the ftrace profile test to 16 MB.
Output after:
# ./perf test ftrace
79: perf ftrace tests : Ok
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: agordeev@linux.ibm.com
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: sumanthk@linux.ibm.com
Link: https://lore.kernel.org/r/20241119064856.641446-1-tmricht@linux.ibm.com
Suggested-by: Sven Schnelle <svens@linux.ibm.com>
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
On ARM the cpuid is dependent on the core type of the CPU in
question. The PMU was passed for the sake of the CPU map but this
means in places a temporary PMU is created just to pass a CPU
value. Just pass the CPU and fix up the callers.
As there are no longer PMU users in header.h, shuffle forward
declarations earlier to work around build failures.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Zong-You Xie <ben717@andestech.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20241107162035.52206-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently satisfied via header.h. Note, pmu.h includes parse-events.h.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Zong-You Xie <ben717@andestech.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20241107162035.52206-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Address sanitizer flagged the missing parse_events_error__exit when
testing on ARM.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241115201258.509477-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arm a57 only has speculative branch events so this test fails there. The
test doesn't depend on branch instructions so change it to instructions
which is pretty much guaranteed to be everywhere. The
test_branch_counter() test above already tests for the existence of the
branches event and skips if its not present.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241115161600.228994-1-james.clark@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The purpose of this test is to test for races in the exit of 'perf
trace' missing the last events, it was failing when the COMM wasn't
resolved either because we missed some PERF_RECORD_COMM or somehow
raced on getting it from procfs.
Add --no-comm to the 'perf trace' command line so that we get a
consistent, pid only output, which allows the test to achieve its goal.
This is the output from
'perf trace --no-comm -e syscalls:sys_enter_exit_group':
0.000 21953 syscalls:sys_enter_exit_group()
0.000 21955 syscalls:sys_enter_exit_group()
0.000 21957 syscalls:sys_enter_exit_group()
0.000 21959 syscalls:sys_enter_exit_group()
0.000 21961 syscalls:sys_enter_exit_group()
0.000 21963 syscalls:sys_enter_exit_group()
0.000 21965 syscalls:sys_enter_exit_group()
0.000 21967 syscalls:sys_enter_exit_group()
0.000 21969 syscalls:sys_enter_exit_group()
0.000 21971 syscalls:sys_enter_exit_group()
Now it passes:
root@number:~# perf test "trace exit race"
110: perf trace exit race : Ok
root@number:~#
root@number:~# perf test -v "trace exit race"
110: perf trace exit race : Ok
root@number:~#
If we artificially make it run just 9 times instead of the 10 it runs,
i.e. by manually doing:
trace_shutdown_race() {
for _ in $(seq 9); do
that 9 is $iter, 10 in the patch, we get:
root@number:~# vim ~acme/libexec/perf-core/tests/shell/trace_exit_race.sh
root@number:~# perf test -v "trace exit race"
--- start ---
test child forked, pid 24629
Missing output, expected 10 but only got 9
---- end(-1) ----
110: perf trace exit race : FAILED!
root@number:~#
I.e. 9 'perf trace' calls produced the expected output, the inverse grep
didn't show anything, so the patch provided by Howard for the previous
patch kicks in and shows a more informative message.
Tested-by: Howard Chu <howardchu95@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Peterson <benjamin@engflow.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/ZzdknoHqrJbojb6P@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If it fails we need to check what was the reason, what were the lines
that didn't match the expected format, so:
root@number:~# perf test -v "trace exit race"
--- start ---
test child forked, pid 2028724
Lines not matching the expected regexp: ' +[0-9]+\.[0-9]+ +true/[0-9]+ syscalls:sys_enter_exit_group\(\)$':
0.000 :2028750/2028750 syscalls:sys_enter_exit_group()
---- end(-1) ----
110: perf trace exit race : FAILED!
root@number:~#
In this case we're not resolving the process COMM for some reason and
fallback to printing just the pid/tid, this will be fixed in a followup
patch.
Howard Chu spotted a problem with single code surrounding a regexp, that
made the test always fail, but since there were some failures when I
tested (COMM not being resolved in some of the results) the end inverse
grep would show some lines and thus didn't notice the single quote
problem.
He also provided a patch to test if less than the number of expected
matches took place but all of them with the expected output, in which
case the inverse grep wouldn't show anything, confusing the tester.
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Peterson <benjamin@engflow.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/ZzdknoHqrJbojb6P@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test that checks that trace output is not lost to races. This is
accomplished by tracing the exit_group syscall of "true" multiple times and
checking for correct output.
Signed-off-by: Benjamin Peterson <benjamin@engflow.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Howard Chu <howardchu95@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241107232128.108981-3-benjamin@engflow.com
[ Addressed two ShellCheck warnings ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Based on a mix of the sysfs PMU test (for creating the reference
files) and the tool PMU test, test that parsing given hwmon events
with there aliases creates the expected config values.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yoshihiro Furudera <fj5100bi@fujitsu.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20241109003759.473460-7-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Filename parsing maps a hwmon filename to constituent parts enum/int
parts for the hwmon config value. Add a test case for the parsing.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yoshihiro Furudera <fj5100bi@fujitsu.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
[namhyung: add #include <linux/string.h> for strlcpy()]
Link: https://lore.kernel.org/r/20241109003759.473460-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
During the parallel testing, I've noticed some ftrace test failures. It
seems the regex pattern checks 100 msec of nanosleep with the error
range of 10 msec. But sometimes it's affected by other processes and
resulted in more time in the syscall.
The following output shows that it took more than 120 msec and failed.
Let's update the regex pattern so that it can allow more drifts.
perf ftrace profile test
# Total (us) Avg (us) Max (us) Count Function
121279.500 121279.500 121279.500 1 __x64_sys_clock_nanosleep
121278.400 121278.400 121278.400 1 common_nsleep
121277.800 121277.800 121277.800 1 hrtimer_nanosleep
121277.100 121277.100 121277.100 1 do_nanosleep
341760.289 56960.048 121273.400 6 schedule
176.200 25.171 31.616 7 scheduler_tick
0.923 0.923 0.923 1 native_smp_send_reschedule
345522.360 69104.472 345320.600 5 __x64_sys_execve
345486.585 69097.317 345312.700 5 do_execveat_common.isra.0
340730.300 340730.300 340730.300 1 bprm_execve
1.758 0.879 0.883 2 sched_mm_cid_before_execve
1.112 1.112 1.112 1 sched_mm_cid_after_execve
---- end(-1) ----
81: perf ftrace tests : FAILED!
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241102231702.2262258-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Since the C test wrapper for attr.py was removed we don't have an attr.o
object for that CFLAGS_attr.o to apply for, remove it.
Fixes: 3a447031f5 ("perf test: Remove C test wrapper for attr.py")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/ZyjbksKYnV22zmz-@x1
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The cpu-list part of this testcase has proven itself to be unreliable.
Sometimes, we get "<not counted>" for system.slice when pinned to CPUs
0 and 1. In such case, the test fails.
Since we cannot simply guarantee that any system.slice load will run
on any arbitrary list of CPUs, except the whole set of all CPUs, let's
rather remove the cpu-list subtest.
Fixes: a84260e314 ("perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test")
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: vmolnaro@redhat.com
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20241101102812.576425-1-mpetlan@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Having multiple unwinding libraries makes the perf code harder to
understand and we have unused/untested code paths.
Perf made BPF support an opt-out rather than opt-in feature. As libbpf
has a libelf dependency, elfutils that provides libelf will also
provide libdw. When libdw is present perf will use libdw unwinding
rather than libunwind unwinding even if libunwind support is compiled
in.
Rather than have libunwind built into perf and never used, explicitly
disable the support and make it opt-in.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20241028193619.247727-1-irogers@google.com
Closes: https://lore.kernel.org/linux-perf-users/CAP-5=fUXkp-d7gkzX4eF+nbjb2978dZsiHZ9abGHN=BN1qAcbg@mail.gmail.com/
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
This allows a uniform test numbering even though two passes are used
to execute them.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241025192109.132482-11-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
If the `perf test` process is killed the child tests continue running
and may run indefinitely. Propagate SIGINT (ctrl-C) and SIGTERM (kill)
signals to the running child processes so that they terminate when the
parent is killed.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241025192109.132482-10-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Now C tests can have the "exclusive" flag to run without other tests,
and shell tests can add "(exclusive)" to their description, run tests
in parallel by default. Tests which flake when run in parallel can be
marked exclusive to resolve the problem.
Non-scientifically, the reduction on `perf test` execution time is
from 8m35.890s to 3m55.115s on a Tigerlake laptop. So the tests
complete in less than half the time.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241025192109.132482-9-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
In pass 1 run all tests that succeed when run in parallel. In pass 2
sequentially run all remaining tests that are flagged as
"exclusive". Sequential and dont_fork tests keep to run in pass 1.
Read the exclusive flag from the shell test descriptions, but remove
from display to avoid >100 characters. Add error handling to finish
tests if starting a later test fails. Mark the task-exit test as
exclusive due to issues reported-by James Clark.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241025192109.132482-8-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add a signal handler around running a test. If a signal occurs during
the test a siglongjmp unwinds the stack and output is flushed. The
global run_test_jmp_buf is either unique per forked child or not
shared during sequential execution.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241025192109.132482-7-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Some shell tests compete for resources and so can't run with other
tests, tag such tests. The "(exclusive)" stems from shared/exclusive
to describe how the tests run as if holding a lock.
For ARM/coresight tests:
Suggested-by: James Clark <james.clark@linaro.org>
Additional failing tests:
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241025192109.132482-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Python's json.tool will output the input json to stdout. Redirect to
/dev/null to avoid blocking on stdout writes.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241025192109.132482-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The variable duplicates sequential but is only used for command line
argument processing. Reduce scope to make the behavior clearer.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241025192109.132482-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Before polling or sleeping to wait for a test to complete, print out
": Running (<num> active)" where the number of active tests is
determined by iterating over the tests and seeing which return false
for check_if_command_finished. The line erasing and printing out only
occur if the number of runnings tests changes to avoid the line
flickering excessively. Knowing tests are running allows a user to
know a test is running and in parallel mode how many of the tests are
waiting to complete. If color mode is disabled then avoid displaying
the "Running" message as deleting the line isn't reliable.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241025192109.132482-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Test case test_adding_blacklisted ends in failure if the blacklisted
probe is of an assembler function with no DWARF available. At the same
time, probing the blacklisted function with ASM DWARF doesn't test the
blacklist itself as the failure is a result of the broken DWARF.
When the broken DWARF output is encountered, check if the probed
function was compiled by the assembler. If so, the broken DWARF message
is expected and does not report a perf issue, else report a failure. If
the ASM DWARF affected the probe, try the next probe on the blacklist.
If the first 5 probes are defective due to broken DWARF, skip the test
case.
Fixes: def5480d63 ("perf testsuite probe: Add test for blacklisted kprobes handling")
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241017161555.236769-1-vmolnaro@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's a very simply test just to run with cycles:P and instructions:P
events.
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Mingwei Zhang <mizhang@google.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20241016062359.264929-10-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
It seems perf sets the exclude_guest bit because of Intel PEBS
implementation which uses a virtual address. IIUC now kernel disables
PEBS when it goes to the guest mode regardless of this bit so we don't
need to set it explicitly. At least for the other archs/vendors.
I found the commit 1342798cc1 set the exclude_guest for precise_ip
in the tool and the commit 20b279ddb3 added kernel side enforcement
which was reverted by commit a706d965dc later.
Actually it doesn't set the exclude_guest for the default event
(cycles:P) already.
$ grep -m1 vendor /proc/cpuinfo
vendor_id : GenuineIntel
$ perf record -e cycles:P true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (9 samples) ]
$ perf evlist -v | tr ',' '\n' | grep -e exclude -e precise
precise_ip: 3
But having lower 'p' modifier set the bit for some reason.
$ perf record -e cycles:pp true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (9 samples) ]
$ perf evlist -v | tr ',' '\n' | grep -e exclude -e precise
precise_ip: 2
exclude_guest: 1
Actually AMD IBS suffers from this because it doesn't support excludes
and having this bit effectively disables new features in the current
implementation (due to the missing feature check).
$ grep -m1 vendor /proc/cpuinfo
vendor_id : AuthenticAMD
$ perf record -W -e cycles:p -vv true 2>&1 | grep switching
switching off PERF_FORMAT_LOST support
switching off weight struct support
switching off bpf_event
switching off ksymbol
switching off cloexec flag
switching off mmap2
switching off exclude_guest, exclude_host
By not setting exclude_guest, we can fix this inconsistency and the
troubles.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Mingwei Zhang <mizhang@google.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20241016062359.264929-5-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The exclude_guest in the event attribute is to limit profiling in the
host environment. But I'm not sure why we want to set it by default
cause we don't care about it in most cases and I feel like it just
makes new PMU implementation complicated.
Of course it's useful for perf kvm command so I added the
exclude_GH_default variable to preserve the old behavior for perf kvm
and other commands like perf record and stat won't set the exclude bit.
This is helpful for AMD IBS case since having exclude_guest bit will
clear new feature bit due to the missing feature check logic.
$ sysctl kernel.perf_event_paranoid
kernel.perf_event_paranoid = 0
$ perf record -W -e ibs_op// -vv true 2>&1 | grep switching
switching off PERF_FORMAT_LOST support
switching off weight struct support
switching off bpf_event
switching off ksymbol
switching off cloexec flag
switching off mmap2
switching off exclude_guest, exclude_host
Intestingly, I found it sets the exclude_bit if "u" modifier is used.
I don't know why but it's neither intuitive nor consistent. Let's
remove the bit there too.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Mingwei Zhang <mizhang@google.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20241016062359.264929-3-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Commit 7b100989b4 ("perf evlist: Remove __evlist__add_default")
changed to parse "cycles:P" event instead of creating a new cycles
event for perf record. But it also changed the way how modifiers are
handled so it doesn't set the exclude_guest bit by default.
It seems Apple M1 PMU requires exclude_guest set and returns EOPNOTSUPP
if not. Let's add a fallback so that it can work with default events.
Also update perf stat hybrid tests to handle possible u or H modifiers.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Mingwei Zhang <mizhang@google.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20241016062359.264929-2-namhyung@kernel.org
Fixes: 7b100989b4 ("perf evlist: Remove __evlist__add_default")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Using it:
$ perf test -w noplop
No workload found: noplop
$
$ perf test -w
Error: switch `w' requires a value
Usage: perf test [<options>] [{list <test-name-fragment>|[<test-name-fragments>|<test-numbers>]}]
-w, --workload <work>
workload to run for testing, use '--list-workloads' to list the available ones.
$
$ perf test --list-workloads
noploop
thloop
leafloop
sqrtloop
brstack
datasym
landlock
$
Would be good at some point to have a description in 'struct test_workload'.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Clark Williams <williams@redhat.com>
Link: https://lore.kernel.org/r/20241020021842.1752770-3-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Perf test case 84 'perf pipe recording and injection test'
sometime fails on s390, especially on z/VM virtual machines.
This is caused by a very short run time of workload
# perf test -w noploop
which runs for 1 second. Occasionally this is not long
enough and the perf report has no samples for symbol noploop.
Fix this and enlarge the runtime for the perf work load
to 3 seconds. This ensures the symbol noploop is always
present. Since only s390 is affected, make this loop
architecture dependend.
Output before:
Inject -b build-ids test
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.195 MB - ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.277 MB - ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.195 MB - ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.160 MB
/tmp/perf.data.ELzRdq (4031 samples) ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.195 MB - ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.195 MB - ]
Inject -b build-ids test [Success]
Inject --buildid-all build-ids test
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.195 MB - ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.014 MB - ]
Inject --buildid-all build-ids test [Failed - cannot find
noploop function in pipe #2]
Output after:
Successful execution for over 10 times in a loop.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Cc: agordeev@linux.ibm.com
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Link: https://lore.kernel.org/r/20241018081732.1391060-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Like in the metricgroup tests, it should check the permission first and
then skip relevant failures accordingly.
Also it needs to try again with the system wide flag properly. On the
second round, check if the result has the metric name because other
failure cases are checked in the first round already.
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241018204306.741972-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Now the attr tests are shell tests move the associated python and
configuration files. Update the installation build rules for the new
directories. Recycle the lib install rules for python files allowing
the explicit attr.py install line to be dropped.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241015000158.871828-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Remove the C wrapper now a shell script wrapper exists. Move
perf_event_attr dumping functions to evsel.c and reduce the scope of
variables/defines. Use fprintf to avoid snprintf complexities in
WRITE_ASS.
Add __SANE_USERSPACE_TYPES__ to evsel.c to fix format flag issues on
PowerPC triggered by moving attr.c functions to evsel.c.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241015000158.871828-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The "Setup struct perf_event_attr" test in attr.c does a bunch of
directory finding to set up running a python test that in general is
more brittle than similar logic we have in shell tests. Add a shell
test that invokes and runs the tests in the python attr.py script.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241015000158.871828-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
On my system, perf list is very slow to print the whole events. I think
there's a performance issue in SDT and uprobes event listing. I noticed
this issue while running perf test on x86 but it takes long to check
some CoreSight event which should be skipped quickly.
Anyway, some test uses perf list to check whether the required event is
available before running the test. The perf list command can take an
argument to specify event class or (glob) pattern. But glob pattern is
only to suppress output for unmatched ones after checking all events.
In this case, specifying event class is better to reduce the number of
events it checks and to avoid buggy subsystems entirely.
No functional changes intended.
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20241016065654.269994-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The testcase for tool_pmu failed in powerpc as below:
./perf test -v "Parsing without PMU name"
8: Tool PMU :
8.1: Parsing without PMU name : FAILED!
This happens when parse_events results in either skip or fail
of an event. Because the code invokes evlist__delete(evlist)
and "goto out".
ret = parse_events(evlist, str, &err);
if (ret) {
evlist__delete(evlist);
But in the "out" section also evlist__delete happens.
out:
evlist__delete(evlist);
return ret;
Hence remove the duplicate evlist__delete from the first path
in the testcase
With the change:
# ./perf test -v "Parsing without PMU name"
8: Tool PMU :
8.1: Parsing without PMU name : Ok
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: akanksha@linux.ibm.com
Cc: hbathini@linux.ibm.com
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20241013170732.71339-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
perf fails to compile on systems with GCC version11
as below:
In file included from /usr/include/string.h:519,
from /home/athir/perf-tools-next/tools/include/linux/bitmap.h:5,
from /home/athir/perf-tools-next/tools/perf/util/pmu.h:5,
from /home/athir/perf-tools-next/tools/perf/util/evsel.h:14,
from /home/athir/perf-tools-next/tools/perf/util/evlist.h:14,
from tests/tool_pmu.c:3:
In function ‘strncpy’,
inlined from ‘do_test’ at tests/tool_pmu.c:25:3:
/usr/include/bits/string_fortified.h:95:10: error: ‘__builtin_strncpy’ specified bound 128 equals destination size [-Werror=stringop-truncation]
95 | return __builtin___strncpy_chk (__dest, __src, __len,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
96 | __glibc_objsize (__dest));
| ~~~~~~~~~~~~~~~~~~~~~~~~~
The compile error is from strncpy refernce in do_test:
strncpy(str, tool_pmu__event_to_str(ev), sizeof(str));
This behaviour is not observed with GCC version 8, but observed
with GCC version 11 . This is message from gcc for detecting
truncation while using strncpu. Use snprintf instead of strncpy
here to be safe.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: akanksha@linux.ibm.com
Cc: hbathini@linux.ibm.com
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20241013173742.71882-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ensure parsing with and without PMU creates events with the expected
config values. This ensures the tool.json doesn't get out of sync with
tool_pmu_event enum.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241002032016.333748-11-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Hard coded terms like "config=10" are skipped by perf_pmu__config
assuming they were already applied to a perf_event_attr by parse
event's config_attr function. When doing a reverse number to name
lookup in perf_pmu__name_from_config, as the hardcoded terms aren't
applied the config value is incorrect leading to misses or false
matches. Fix this by adding a parameter to have perf_pmu__config apply
hardcoded terms too (not just in parse event's config_term_common).
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241002032016.333748-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
With the patch 0b6c5371c0 "Add missing topdown metrics events" eight
topdown metric events with numbers ranging from 0x8000 to 0x8700 were
added to the test since they were added as 'perf stat' default events.
Later the patch 951efb9976 "Update no event/metric expectations" kept
only 4 of those events(0x8000-0x8300).
Currently, the topdown events with numbers 0x8400 to 0x8700 are missing
from the list of expected events resulting in a failure. Add back the
missing topdown events.
Fixes: 951efb9976 ("perf test attr: Update no event/metric expectations")
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: mpetlan@redhat.com
Link: https://lore.kernel.org/r/20240311081611.7835-1-vmolnaro@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Test "Setup struct perf_event_attr" consists of multiple test cases that
can affect the max sample rate value for perf events. Some test cases
check this value as it should not be lowered under the set minimum for
the given test. Currently, it is possible for the test cases to affect
each other as the previous tests can lower the sample rate, leading to
a possible failure of some of the future test cases as the value is not
restored at any point.
# 10: Setup struct perf_event_attr:
--- start ---
test child forked, pid 104220
Using CPUID 0x00000000413fd0c1
running './tests/attr/test-record-C0'
Current sample rate: 10000
running './tests/attr/test-record-basic'
Current sample rate: 900
running './tests/attr/test-record-branch-any'
Current sample rate: 600
running './tests/attr/test-record-dummy-C0'
Current sample rate: 600
expected sample_period=4000, got 600
FAILED './tests/attr/test-record-dummy-C0' - match failure
Restore the max sample rate value for perf events to a reasonable value
before each test case if its value was lowered too much to ensure the
same conditions for each test case.
# 10: Setup struct perf_event_attr:
--- start ---
test child forked, pid 107222
Using CPUID 0x00000000413fd0c1
running './tests/attr/test-record-C0'
Current sample rate: 10000
running './tests/attr/test-record-basic'
Current sample rate: 800
running './tests/attr/test-record-branch-any'
Current sample rate: 700
unsupp './tests/attr/test-record-branch-any'
running './tests/attr/test-record-branch-filter-any'
Current sample rate: 10000
running './tests/attr/test-record-count'
Current sample rate: 10000
running './tests/attr/test-record-data'
Current sample rate: 600
running './tests/attr/test-record-dummy-C0'
Current sample rate: 800
running './tests/attr/test-record-freq'
Current sample rate: 10000
...
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Radostin Stoyanov <rstoyano@redhat.com>
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241003125136.15918-1-vmolnaro@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Command perf test 86 fails on s390:
# perf test -F 86
ping 868299 [007] 28248.013596: probe_libc:inet_pton_1: (3ff95948020)
3ff95948020 inet_pton+0x0 (inlined)
3ff9595e6e7 text_to_binary_address+0x1007 (inlined)
3ff9595e6e7 gaih_inet+0x1007 (inlined)
FAIL: expected backtrace entry \
"main\+0x[[:xdigit:]]+[[:space:]]\(.*/bin/ping.*\)$"
got "3ff9595e6e7 gaih_inet+0x1007 (inlined)"
86: probe libc's inet_pton & backtrace it with ping : FAILED!
#
The root cause is a new stack layout, two functions have been added
as seen below.
# perf script | tac | grep -m1 '^ping' -B9 | tac
ping 866856 [007] 25979.494921: probe_libc:inet_pton: (3ff8ec48020)
3ff8ec48020 inet_pton+0x0 (inlined)
new --> 3ff8ec5e6e7 text_to_binary_address+0x1007 (inlined)
new --> 3ff8ec5e6e7 gaih_inet+0x1007 (inlined)
3ff8ec5e6e7 getaddrinfo+0x1007 (/usr/lib64/libc.so.6)
2aa3fe04bf5 main+0xff5 (/usr/bin/ping)
3ff8eb34a5b __libc_start_call_main+0x8b (/usr/lib64/libc.so.6)
3ff8eb34b5d __libc_start_main@GLIBC_2.2+0xad (inlined)
2aa3fe06a1f [unknown] (/usr/bin/ping)
#
The new functions in the call chain are:
- text_to_binary_address()
- gaih_inet().
Both functions are inlined and do not show up in the output
of the nm command:
# nm -a /usr/lib64/libc.so.6 | \
grep -E '(text_to_binary_address|gaih_inet)$'
#
There is no possibility to add these 2 functions depending on their
existance in the C library.
Add text_to_binary_address() and gaih_inet() to the list of
expected functions in an compatible way and extend the regular
expression. On s390 the backtrace can now be
Before After
probe_libc:inet_pton probe_libc:inet_pton
inet_pton inet_pton
getaddrinfo getaddrinfo | text_to_binary_address
main main | gaih_inet
Output after:
# perf test -F 86
86: probe libc's inet_pton & backtrace it with ping : Ok
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: agordeev@linux.ibm.com
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: sumanthk@linux.ibm.com
Link: https://lore.kernel.org/r/20241001124224.3370306-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The "perf record" tool will now default to this new mode if the user
specifies a sampling group when not in system-wide mode, and when
"--no-inherit" is not specified.
This change updates evsel to allow the combination of inherit
and PERF_SAMPLE_READ.
A fallback is implemented for kernel versions where this feature is not
supported.
Signed-off-by: Ben Gainey <ben.gainey@arm.com>
Cc: james.clark@arm.com
Link: https://lore.kernel.org/r/20241001121505.1009685-3-ben.gainey@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Clean up return value to be TEST_* rather than unspecific integer. Add
test case skip reason. Skip test if EACCES comes back from
evsel__newtp.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241001052327.7052-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Clean up return value to be TEST_* rather than unspecific integer. Add
test case skip reason. Skip test if EACCES comes back from
evsel__newtp.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241001052327.7052-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
These error paths occur without sufficient permissions. Fix the memory
leaks to make leak sanitizer happier.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241001052327.7052-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add more test cases to cover all supported topdown events regroup cases.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lore.kernel.org/r/20240913084712.13861-7-dapeng1.mi@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add counting and leader sampling tests to verify topdown events including
raw format can be reordered correctly.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lore.kernel.org/r/20240913084712.13861-6-dapeng1.mi@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add leader sampling test to validate event counts are captured into
record and the count value is consistent.
Suggested-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lore.kernel.org/r/20240913084712.13861-5-dapeng1.mi@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
perf test 70 takes a long time. One culprit is the output of command
perf annotate. Per default enabled are
- demangle symbol names
- interleave source code with assembly code.
Disable demangle of symbols and abort the annotation
after the first 250 lines.
This speeds up the test case considerable, for example
on s390:
Output before:
# time perf test 70
70: perf annotate basic tests : Ok
.....
real 2m7.467s
user 1m26.869s
sys 0m34.086s
#
Output after:
# time perf test 70
70: perf annotate basic tests : Ok
real 0m3.341s
user 0m1.606s
sys 0m0.362s
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: sumanthk@linux.ibm.com
Link: https://lore.kernel.org/r/20240917085706.249691-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Test that one cycles event is opened for each core PMU when "perf stat"
is run without arguments.
The event line can either be output as "pmu/cycles/" or just "cycles" if
there is only one PMU. Include 2 spaces for padding in the one PMU case
to avoid matching when the word cycles is included in metric
descriptions.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: ak@linux.intel.com
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240926144851.245903-8-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
PMUs aren't listed in /sys/devices/ on DT devices, so change the search
directory to /sys/bus/event_source/devices which works everywhere. Also
add armv8_cortex_* as a known PMU type to search for to make the test
run on more devices.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: ak@linux.intel.com
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240926144851.245903-7-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
"evsel->pmu_name" is only ever assigned a strdup of "pmu->name", a
strdup of "evsel->pmu_name" or NULL. As such, prefer to use
"pmu->name" directly and even to directly compare PMUs than PMU
names. For safety, add some additional NULL tests.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
[ Fix arm-spe.c usage of pmu_name and empty PMU name ]
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: ak@linux.intel.com
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240926144851.245903-6-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Without aggregation on Intel:
```
$ perf stat -e instructions,cycles ...
```
Will use "cycles" for the name of the legacy cycles event but as
"instructions" has a sysfs name it will and a "[cpu]" PMU suffix. This
often breaks things as the space between the event and the PMU name
look like an extra column. The existing uniquify logic was also
uniquifying in cases when all events are core and not with uncore
events, it was not correctly handling modifiers, etc.
Change the logic so that an initial pass that can disable
uniquification is run. For individual counters, disable uniquification
in more cases such as for consistency with legacy events or for
libpfm4 events. Don't use the "[pmu]" style suffix in uniquification,
always use "pmu/.../". Change how modifiers/terms are handled in the
uniquification so that they look like parse-able events.
This fixes "102: perf stat metrics (shadow stat) test:" that has been
failing due to "instructions [cpu]" breaking its column/awk logic when
values aren't aggregated. This started happening when instructions
could match a sysfs rather than a legacy event, so the fixes tag
reflects this.
Fixes: 617824a7f0 ("perf parse-events: Prefer sysfs/JSON hardware events over legacy")
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
[ Fix Intel TPEBS counting mode test ]
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: ak@linux.intel.com
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240926144851.245903-3-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Refactor code to have some more error diagnosis on traps, etc. and to
do less work on each line. Add an ignore situation for security failures.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20240925173013.12789-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Run a few samples through the disassembly script and check to see that
at least one branch instruction is printed.
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Tested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ruidong Tian <tianruidong@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Cc: John Garry <john.g.garry@oracle.com>
Cc: scclevenger@os.amperecomputing.com
Link: https://lore.kernel.org/r/20240916135743.1490403-8-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Previously "set -e" meant any non-zero exit code from perf stat would
cause a test failure. As a non-zero exit happens when there aren't
sufficient permissions, check for this case and make the exit code
2/skip for it.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20240502223115.2357499-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Rather than passing a fake PMU around, just pass that the fake PMU
should be used - true when doing testing. Move the fake PMU into
pmus.[ch] and try to abstract the PMU's properties in pmu.c, ie so
there is less "if fake_pmu" in non-PMU code. Give the fake PMU a made
up type number.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xu Yang <xu.yang_2@nxp.com>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20240907050830.6752-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Thomas reported the vfs_getname perf tests failing on s/390, it seems it
was just to some extraneous '=' somehow getting into the regexp, remove
it, now:
root@x1:~# perf test getname
91: Add vfs_getname probe to get syscall args filenames : Ok
93: Use vfs_getname probe to get syscall args filenames : FAILED!
126: Check open filename arg using perf trace + vfs_getname : Ok
root@x1:~#
Second one remains a mistery, have to take some time to nail it down.
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>,
Link: https://lore.kernel.org/lkml/1d7f3b7b-9edc-4d90-955c-9345428563f1@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The header files parse-events.h is included twice in parse-events.c,
so one inclusion of each can be removed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=10822
Link: https://lore.kernel.org/r/20240910005522.35994-1-yang.lee@linux.alibaba.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add -B option that lazily inserts mmap2 events thereby dropping all
mmap events without samples. This is similar to the behavior of -b
where only build_id events are inserted when a dso is accessed in a
sample.
File size savings can be significant in system-wide mode, consider:
$ perf record -g -a -o perf.data sleep 1
$ perf inject -B -i perf.data -o perf.new.data
$ ls -al perf.data perf.new.data
5147049 perf.data
2248493 perf.new.data
Give test coverage of the new option in pipe test.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Link: https://lore.kernel.org/r/20240909203740.143492-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an option that allows all mmap or mmap2 events to be rewritten as
mmap2 events with build IDs.
This is similar to the existing -b/--build-ids and --buildid-all options
except instead of adding a build_id event an existing mmap/mmap2 event
is used as a template and a new mmap2 event synthesized from it.
As mmap2 events are typical this avoids the insertion of build_id
events.
Add test coverage to the pipe test.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Link: https://lore.kernel.org/r/20240909203740.143492-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In probe_vfs_getname.sh, current we use "perf record --dry-run"
to check for libtraceevent and skip the test if perf is not
build with libtraceevent. Change the check to use "perf check feature"
option
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240904190132.415212-6-adityag@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we use output of 'perf version --build-options', to check
whether perf was built with libtraceevent support.
Instead, use 'perf check feature libtraceevent' to check for
libtraceevent support.
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240904190132.415212-5-adityag@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The default breakpoint length is "sizeof(long)" however this is
incorrect on platforms like Aarch64 where sizeof(long) is 8 but the
breakpoint length is 4. Add a helper function that can be used to
determine the correct breakpoint length, in this change it just
returns the existing default sizeof(long) value.
Use the helper in the bp_account test so that, when modifying the
event from a watchpoint to a breakpoint, the breakpoint length is
appropriate for the architecture and not just sizeof(long).
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/r/20240904050606.752788-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
i386 only supports watchpoints up to size 4, 8 bytes causes extra
counts and test failures.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/r/20240831070415.506194-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The probe command is dependent on libelf. Skip the test if the
required probe command isn't present.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/r/20240831070415.506194-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In addition to the existing support for libbfd and calling out to
an external addr2line command, add support for using libllvm directly.
This is both faster than libbfd, and can be enabled in distro builds
(the LLVM license has an explicit provision for GPLv2 compatibility).
Thus, it is set as the primary choice if available.
As an example, running 'perf report' on a medium-size profile with
DWARF-based backtraces took 58 seconds with LLVM, 78 seconds with
libbfd, 153 seconds with external llvm-addr2line, and I got tired and
aborted the test after waiting for 55 minutes with external bfd
addr2line (which is the default for perf as compiled by distributions
today).
Evidently, for this case, the bfd addr2line process needs 18 seconds (on
a 5.2 GHz Zen 3) to load the .debug ELF in question, hits the 1-second
timeout and gets killed during initialization, getting restarted anew
every time. Having an in-process addr2line makes this much more robust.
As future extensions, libllvm can be used in many other places where
we currently use libbfd or other libraries:
- Symbol enumeration (in particular, for PE binaries).
- Demangling (including non-Itanium demangling, e.g. Microsoft
or Rust).
- Disassembling (perf annotate).
However, these are much less pressing; most people don't profile PE
binaries, and perf has non-bfd paths for ELF. The same with demangling;
the default _cxa_demangle path works fine for most users, and while bfd
objdump can be slow on large binaries, it is possible to use
--objdump=llvm-objdump to get the speed benefits. (It appears
LLVM-based demangling is very simple, should we want that.)
Tested with LLVM 14, 15, 16, 18 and 19. For some reason, LLVM 12 was not
correctly detected using feature_check, and thus was not tested.
Committer notes:
Added the name and a __maybe_unused to address:
1 13.50 almalinux:8 : FAIL gcc version 8.5.0 20210514 (Red Hat 8.5.0-22) (GCC)
util/srcline.c: In function 'dso__free_a2l':
util/srcline.c:184:20: error: parameter name omitted
void dso__free_a2l(struct dso *)
^~~~~~~~~~~~
make[3]: *** [/git/perf-6.11.0-rc3/tools/build/Makefile.build:158: util] Error 2
Signed-off-by: Steinar H. Gunderson <sesse@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20240803152008.2818485-1-sesse@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Additional pipe tests where piped files are written to disk. This
means that spotting a file name of "-" isn't a sufficient "is pipe?"
test.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240829150154.37929-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
