The driver doesn't want to implicitly sync on the DMA_RESV_USAGE_BOOKKEEP
usage fences, and the BOOKEEP fences should be synced explicitly. So, as
the VM implicit syncing only need to return and sync the dependent read
fences.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is an optional TA which is only available on
certain embedded systems. Mark it as optional to avoid
user confusion. This mirrors what we already do for
other optional TAs.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4181
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the s3/s0ix and s4 flags in the pm notifier so that we can skip
the resource evictions properly in pm prepare based on whether
we are suspending or hibernating. Drop the eviction as processes
are not frozen at this time, we we can end up getting stuck trying
to evict VRAM while applications continue to submit work which
causes the buffers to get pulled back into VRAM.
v2: Move suspend flags out of pm notifier (Mario)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4178
Fixes: 2965e6355d ("drm/amd: Add Suspend/Hibernate notification callback support")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This notification may arrive in VF mailbox while polling for response from
another event.
This patches covers the following scenarios:
- If VF is already in RMA state, then do not attempt to contact the host.
Host will ignore the VF after sending the notification.
- If the notification is detected during polling, then set the RMA status,
and return error to caller.
- If the notification arrives by interrupt, then set the RMA status and
queue a reset. This reset will fail and VF will stop runtime services.
Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Host may stop runtime services after reaching a bad page threshold.
This notification will indicate to the VF that it no longer has
access to the GPU.
Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 3a9626c816.
This breaks S4 because we end up setting the s3/s0ix flags
even when we are entering s4 since prepare is used by both
flows. The causes both the S3/s0ix and s4 flags to be set
which breaks several checks in the driver which assume they
are mutually exclusive.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3634
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN1_AON_SOC_ADDRESS_3_0 offset varies on different
VCN generations, the issue in vcn4.0.5 is caused by
a different VCN1_AON_SOC_ADDRESS_3_0 offset.
This patch does the following:
1. use the same offset for other VCN generations.
2. use the vcn4.0.5 special offset
3. update vcn_4_0 and vcn_5_0
Acked-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The dma_resv_add_fence() already refers to the added fence.
So when attaching the evciton fence to the gem bo, it needn't
refer to it anymore.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Host will send a notification when new bad pages are available.
Uopn guest request, the first 256 bad page addresses
will be placed into the PF2VF region.
Guest should pause the PF2VF worker thread while
the copy is in progress.
Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently VFs rely on poison consumption interrupt from HW
to kick off the bad page retirement process. Part of this process
includes a VF reset.
This patch adds the following:
1) Host Bad Pages notification message.
2) Guest request bad pages message.
When combined, VFs are able to reserve the pages early, and potentially
avoid future poison consumption that will disrupt user services
from consequent FLR.
Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add some random documentation associated with the ring buffer
manipulations and writeback.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgX1CgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGxiIH/A7LHlVatGEQgRFi
0JALDgcuGTMtMU1qD43rv8Z1GXqTpCAlaBt9D1C9cUH/86MGyBTVRWgVy0wkaU2U
8QSfFWQIbrdaIzelHtzmAv5IDtb+KrcX1iYGLcMb6ZYaWkv8/CMzMX1nkgxEr1QT
37Xo3/F17yJumAdNQxdRhVLGy2d3X5rScecpufwh97sMwoddllMCDs2LIoeSAYpG
376/wzni09G2fADa8MEKqcaMue4qcf0FOo/gOkT8YwFGSZLKa6uumlBLg04QoCt0
foK2vfcci1q4H4ZbCu3uQESYGLQHY0f2ICDCwC3m25VF9a81TmlbC3MLum3vhmKe
RtLDcXg=
=xyaI
-----END PGP SIGNATURE-----
BackMerge tag 'v6.15-rc5' into drm-next
Linux 6.15-rc5, requested by tzimmerman for fixes required in drm-next.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Keep only the latest fences to reduce the number of values
given back to userspace
v2: - Export this code from dma-fence-unwrap.c(by Christian).
v3: - To split this in a dma_buf patch and amd userq patch(by Sunil).
- No need to add a new function just re-use existing(by Christian).
v4: Export dma_fence_dedub_array function and used it(by Christian).
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adjusted the enforce isolation setting handling to include the ability
to disable the cleaner shader without affecting isolation between tasks.
v2: Updated enforce isolation documentation and parameters. (Alex)
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the functions in amdgpu_userqueues.c from
DRM_DBG_DRIVER to drm_dbg_driver so multi gpu instance
can be logged in.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
change the DRM_ERROR and drm_err to drm_file_err
to add process name and pid to the logging.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm_file will be used in usermode queues code to
enable better process information in logging and hence
add drm_file part of the userq_mgr struct.
update the drm_file pointer in userq_mgr for each
amdgpu_driver_open_kms.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For vcn5.0.1 only, enable DPG PAUSE to avoid DPG resets.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3e5f86c14c)
APUs in passthrough mode use HDP flush. 0x7F000 offset used for
remapping HDP flush is mapped to VPE space which could get power gated.
Use another unused offset in BIF space.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d8116a32cd)
Cc: stable@vger.kernel.org
If peer memory is XGMI-accessible, we should never access it through PCIe
P2P DMA mappings. PCIe P2P is slower, has different coherence behaviour,
limited or no support for atomics, or may not work at all. Fail with a
warning if DMABUF mappings of such memory are attempted.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dbe4c63689)
The "ticket" pointer points to in the middle of the &exec struct so it
can't be NULL. Remove the check.
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This error path should call amdgpu_bo_unreserve() before returning.
Fixes: d8675102ba ("drm/amdgpu: add vm root BO lock before accessing the vm")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When kernel queues are disabled, all GC vmids are available
for the scheduler. MM vmids are still managed by the driver
so make all 16 available.
Also fix gmc 10 vs 11 mix up in
commit 1f61fc28b9 ("drm/amdgpu/mes: make more vmids available when disable_kq=1")
v2: Properly handle pre-GC 10 hardware
Fixes: 1f61fc28b9 ("drm/amdgpu/mes: make more vmids available when disable_kq=1")
Cc: Arvind Yadav <Arvind.Yadav@amd.com>
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the KIQ pipe for kernel queues and the SCHED pipe for
user queues.
Fixes: 2408b0272b ("drm/amdgpu/mes: consolidate on a single mes reset callback")
Cc: Michael Chen <Michael.Chen@amd.com>
Cc: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Michael Chen <michael.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the legacy one as it covers both kernel queues and
user queues.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These were leftover from mes bring up and are unused.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If it needs a long wait for completion of bootloader execution, report
the status in between. That helps to know if there is some issue during
bootloader execution.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Register access print missed device info.
[How]
Using dev_xxx instead of DRM_xxx to indicate which device
of a hive is the message for.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Keep the register offsets as per link order for querying XGMI v6.4.1
link status.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Fixes: 6dee64e765 ("drm/amdgpu: Fix xgmi v6.4.1 link status reporting")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The mes_v11_0_reset_hw_queue and mes_v12_0_reset_hw_queue functions were
using the wrong union type (MESAPI__REMOVE_QUEUE) when getting the offset
for api_status. Since these functions handle queue reset operations, they
should use MESAPI__RESET union instead.
This fixes the polling of API status during hardware queue reset operations
in the MES for both v11 and v12 versions.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-By: Shaoyun.liu <Shaoyun.liu@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For vcn5.0.1 only, enable DPG PAUSE to avoid DPG resets.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DRM_AMDGPU_NAVI3X_USERQ config support is not required for
usermode queue.
v2: rebase.
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a description for the get_csb_buffer callback, update the glossary,
and add some extra information about RB, which is associated with CSB
configuration.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove duplications from gfx_v6_0_get_csb_buffer by using CSB helpers.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of having the hardcoded values for the CSB buffer in
gfx_v7_0_get_csb_buffer, use the values calculated in previous steps by
accessing raster_config and raster_config_1.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The evf fence name can clearly identify the userq usage.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
APUs in passthrough mode use HDP flush. 0x7F000 offset used for
remapping HDP flush is mapped to VPE space which could get power gated.
Use another unused offset in BIF space.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This debug dump will help on debugging the evf attached gem obj fence
related issue.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If peer memory is XGMI-accessible, we should never access it through PCIe
P2P DMA mappings. PCIe P2P is slower, has different coherence behaviour,
limited or no support for atomics, or may not work at all. Fail with a
warning if DMABUF mappings of such memory are attempted.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use CSB helpers to remove code duplication from gfx_v7_0_get_csb_buffer.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove code duplication from gfx_v8_0_get_csb_buffer by using CSB
helpers.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eliminate code duplication in gfx_v9_0_get_csb_buffer by using CSB
helpers.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove duplicate code by using CSB helpers.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Part of the code in gfx_v11_0_get_csb_buffer can be removed in favor of
some GFX CSB helpers. This commit removes the duplicated part for the
GFX 11 CSB function.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
From GFX6 to GFX11, there is a function for getting the CSB buffer to be
put into the hardware. Three common parts are duplicated in all of these
GFX functions:
1. Prepare the CSB preamble.
2. Parser the CS data.
3. End the CSB preamble.
This commit creates helpers to be used from GFX6 to GFX11.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake with the array utcl2_rounter_str, it
appears it should be utcl2_router_str. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GCC really does not want to consider NULL (or near-NULL) addresses as
valid, so calculations based off of NULL end up getting range-tracked into
being an offset wthin a 0 byte array. It gets especially mad about this:
if (vbios_str == NULL)
vbios_str += sizeof(BIOS_ATOM_PREFIX) - 1;
...
if (vbios_str != NULL && *vbios_str == 0)
vbios_str++;
It sees this as being "sizeof(BIOS_ATOM_PREFIX) - 1" byte offset from
NULL, when building with -Warray-bounds (and the coming
-fdiagnostic-details flag):
In function 'atom_get_vbios_pn',
inlined from 'amdgpu_atom_parse' at drivers/gpu/drm/amd/amdgpu/atom.c:1553:2:
drivers/gpu/drm/amd/amdgpu/atom.c:1447:34: error: array subscript 0 is outside array bounds of 'unsigned char[0]' [-Werror=array-bounds=]
1447 | if (vbios_str != NULL && *vbios_str == 0)
| ^~~~~~~~~~
'amdgpu_atom_parse': events 1-2
1444 | if (vbios_str == NULL)
| ^
| |
| (1) when the condition is evaluated to true
......
1447 | if (vbios_str != NULL && *vbios_str == 0)
| ~~~~~~~~~~
| |
| (2) out of array bounds here
In function 'amdgpu_atom_parse':
cc1: note: source object is likely at address zero
As there isn't a sane way to convince it otherwise, hide vbios_str from
GCC's optimizer to avoid the warning so we can get closer to enabling
-Warray-bounds globally.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reject queries to get current partition modes during reset. Also, don't
accept sysfs interface requests to switch compute partition mode while
in reset.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If peer memory is accessible through XGMI, allow leaving it in VRAM
rather than forcing its migration to GTT on DMABuf attachment.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Hao (Claire) Zhou <hao.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 372c8d72c3)
Pinning of VRAM is for peer devices that don't support dynamic attachment
and move notifiers. But it requires that all such peer devices are able to
access VRAM via PCIe P2P. Any device without P2P access requires migration
to GTT, which fails if the memory is already pinned for another peer
device.
Sharing between GPUs should not require pinning in VRAM. However, if
DMABUF_MOVE_NOTIFY is disabled in the kernel build, even DMABufs shared
between GPUs must be pinned, which can lead to failures and functional
regressions on systems where some peer GPUs are not P2P accessible.
Disable VRAM pinning if move notifiers are disabled in the kernel build
to fix regressions when sharing BOs between GPUs.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Hao (Claire) Zhou <hao.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 05185812ae)
When determining the domains for pinning DMABufs, filter allowed_domains
and fail with a warning if VRAM is forbidden and GTT is not an allowed
domain.
Fixes: f5e7fabd1f ("drm/amdgpu: allow pinning DMA-bufs into VRAM if all importers can do P2P")
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3940796a6e)
log context:seqno of the fence during timeout rather
than logging fence pointer.
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is load usermode queue based on FW support for gfx12.
CP Ucode FW Vesion: [PFP = 2840, ME = 2780, MEC = 3050, MES = 123]
v2: Addressed review comments from Alex
- Just check the firmware versions directly.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Shashank Sharma <shashank.sharma@amd.com>
Cc: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is load usermode queue based on FW support for gfx11.
CP Ucode FW version: [PFP = 2530, ME = 2390, MEC = 2600, MES = 120]
v2: Addressed review comments from Alex.
- Just check the firmware versions directly.
v3: Firmware version checks only for Navi3x(by Alex).
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Shashank Sharma <shashank.sharma@amd.com>
Cc: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
s/userqueue/userq/
1. remove the mix of amdgpu_userqueue and amdgpu_userq
2. to be consistent with other amdgpu_userq_fence.c
3. it's shorter
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
suspend/resume -> evict/restore
Rename to avoid confusion with the system suspend
and resume helpers.
v2: update error messages
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to wait for the last fence before unmapping. This
also fixes a memory leak in amdgpu_userqueue_cleanup()
when the fence isn't signalled.
Fixes: b0db33c8c5 ("drm/amdgpu/userq: rework front end call sequence")
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was missed when the map and unmap were split out
of the mqd create and destroy functions.
Fixes: b0db33c8c5 ("drm/amdgpu/userq: rework front end call sequence")
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Track the state of the queue rather than simple active vs
not. This is needed for other states (hung, preempted, etc.).
While we are at it, move the state tracking into the user
queue front end code.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If user queues are disabled for all IPs in the case
of suspend and resume and for gfx/compute in the case
of enforce isolation, we can return early.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print a kernel message when the scrub bit of status register is set to
indicate that errors are being logged by the scrub.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a helper to get a mask of IPs which support user queues.
Use this in the INFO IOCTL to get the IP mask to replace
the current code.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add queue id support to the user queue wait IOCTL
drm_amdgpu_userq_wait structure.
This is required to retrieve the wait user queue and maintain
the fence driver references in it so that the user queue in
the same context releases their reference to the fence drivers
at some point before queue destruction.
Otherwise, we would gather those references until we
don't have any more space left and crash.
v2: Modify the UAPI comment as per the mesa and libdrm UAPI comment.
Libdrm MR: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/408
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34493
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So that we initialize the MQD as a secure queue.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If peer memory is accessible through XGMI, allow leaving it in VRAM
rather than forcing its migration to GTT on DMABuf attachment.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Hao (Claire) Zhou <hao.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pinning of VRAM is for peer devices that don't support dynamic attachment
and move notifiers. But it requires that all such peer devices are able to
access VRAM via PCIe P2P. Any device without P2P access requires migration
to GTT, which fails if the memory is already pinned for another peer
device.
Sharing between GPUs should not require pinning in VRAM. However, if
DMABUF_MOVE_NOTIFY is disabled in the kernel build, even DMABufs shared
between GPUs must be pinned, which can lead to failures and functional
regressions on systems where some peer GPUs are not P2P accessible.
Disable VRAM pinning if move notifiers are disabled in the kernel build
to fix regressions when sharing BOs between GPUs.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Hao (Claire) Zhou <hao.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set up TMZ for queues.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set up TMZ for queues.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When determining the domains for pinning DMABufs, filter allowed_domains
and fail with a warning if VRAM is forbidden and GTT is not an allowed
domain.
Fixes: f5e7fabd1f ("drm/amdgpu: allow pinning DMA-bufs into VRAM if all importers can do P2P")
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use this to track the whether we want TMZ for queues.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the minimum firmware version for the Cleaner Shader in the
gfx_v10_0_sw_init function.
This change adjusts the minimum required firmware version for the MEC
firmware from 152 to 151, allowing for broader compatibility with
GFX10.1 GPUs.
Fixes: 25961bad92 ("drm/amdgpu/gfx10: Add cleaner shader for GFX10.1.10")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch removes the deprecated SDMA reset callback mechanism, which was previously used to register pre-reset and post-reset callbacks for SDMA engine resets.
The callback mechanism has been replaced with a more direct and efficient approach using `stop_queue` and `start_queue` functions in the ring's function table.
The SDMA reset callback mechanism allowed KFD and AMDGPU to register pre-reset and post-reset functions for handling SDMA engine resets.
However, this approach added unnecessary complexity and was no longer needed after the introduction of the `stop_queue` and `start_queue` functions in the ring's function table.
1. **Remove Callback Mechanism**:
- Removed the `amdgpu_sdma_register_on_reset_callbacks` function and its associated data structures (`sdma_on_reset_funcs`).
- Removed the callback registration logic from the SDMA v4.4.2 initialization code.
2. **Clean Up Related Code**:
- Removed the `sdma_v4_4_2_set_engine_reset_funcs` function, which was used to register the callbacks.
- Removed the `sdma_v4_4_2_engine_reset_funcs` structure, which contained the pre-reset and post-reset callback functions.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add context and seqno of the fence in error logging
rather than printing fence ptr.
Reviewed-by: Christian König <christian.koenig@amd.com>
Suggested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch refactors the SDMA v5.2 queue reset and stop logic to improve
code readability, maintainability, and performance. The key changes include:
1. **Generalized `sdma_v5_2_gfx_stop` Function**:
- Added an `inst_mask` parameter to allow stopping specific SDMA instances
instead of all instances. This is useful for resetting individual queues.
2. **Simplified `sdma_v5_2_reset_queue` Function**:
- Removed redundant loops and checks by directly using the `ring->me` field
to identify the SDMA instance.
- Reused the `sdma_v5_2_gfx_stop` function to stop the queue, reducing code
duplication.
v1: The general coding style is to declare variables like "i" or "r" last. E.g. longest lines first and short lasts. (Chritian)
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch refactors the SDMA v5.0 queue reset and stop logic to improve
code readability, maintainability, and performance. The key changes include:
1. **Generalized `sdma_v5_0_gfx_stop` Function**:
- Added an `inst_mask` parameter to allow stopping specific SDMA instances
instead of all instances. This is useful for resetting individual queues.
2. **Simplified `sdma_v5_0_reset_queue` Function**:
- Removed redundant loops and checks by directly using the `ring->me` field
to identify the SDMA instance.
- Reused the `sdma_v5_0_gfx_stop` function to stop the queue, reducing code
duplication.
v1: The general coding style is to declare variables like "i" or "r" last. E.g. longest lines first and short lasts. (Chritian)
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Register stop/start/soft_reset queue functions for SDMA IP versions v5.2.
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Register stop/start/soft_reset queue functions for SDMA IP versions v5.0.
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces a new function `amdgpu_sdma_soft_reset` to handle SDMA soft resets directly,
rather than relying on the DPM interface.
1. **New `amdgpu_sdma_soft_reset` Function**:
- Implements a soft reset for SDMA engines by directly writing to the hardware registers.
- Handles SDMA versions 4.x and 5.x separately:
- For SDMA 4.x, the existing `amdgpu_dpm_reset_sdma` function is used for backward compatibility.
- For SDMA 5.x, the driver directly manipulates the `GRBM_SOFT_RESET` register to reset the specified SDMA instance.
2. **Integration into `amdgpu_sdma_reset_engine`**:
- The `amdgpu_sdma_soft_reset` function is called during the SDMA reset process, replacing the previous call to `amdgpu_dpm_reset_sdma`.
v2: r should default to an error (Alex)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace old callback mechanism with direct calls to stop/start functions.
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable users to create queues at different priority levels.
The highest level is restricted to drm master.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Handle the queue priority set by the user.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we can track this when we create user queues.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert driver priority levels to MES11 priority levels.
At the moment they are the same, but they may not always
be.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert driver priority levels to MES11 priority levels.
At the moment they are the same, but they may not always
be.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reuse the _pad field for flags.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enforce isolation serializes access to the GFX IP. User
queues are isolated in the MES scheduler, but we still
need to serialize between kernel queues and user queues.
For enforce isolation, group KGD user queues with KFD user
queues.
v2: split out variable renaming, add config guards
v3: use new function names
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since they will be used for both KFD and KGD user queues,
rename them from kfd to userq. No intended functional
change.
Acked-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will be used to stop/start user queue scheduling for
example when switching between kernel and user queues when
enforce isolation is enabled.
v2: use idx
v3: only stop compute/gfx queues
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Track this to align with KFD for enforce isolation
handling.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For VF, it doesn't have the permission to clear overflow, clear the bit
by reset.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace disable_kq parameter with user_queue parameter.
The parameter has the following logic:
-1 = auto (ASIC specific default)
0 = user queues disabled
1 = user queues enabled and kernel queues enabled (if supported)
2 = user queues enabled and kernel queues disabled
The default behavior (-1) is currently the same as 0 for current
ASICs. To enable user queues (in addition to kernel queues) set
user_queue=1. To enable user queues and disable kernel queues
(to make all resources available to user queues), set user_queue=2.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to take a reference to the interrupts to make
sure they stay enabled even if the kernel queues have
disabled them.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to take a reference to the interrupts to make
sure they stay enabled even if the kernel queues have
disabled them.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable doorbell for JPEG5_0_1 and adjust index for VCN5_0_1.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
