drm/i915 feature pull for v6.1:
Features and functionality:
- Early Meteorlake (MTL) enabling (José, Radhakrishna, Clint, Imre, Vandita, Ville, Jani)
- Support more HDMI pixel clock frequencies on DG2 (Clint)
- Sanity check PCI BARs (Piotr Piórkowski)
- Enable DC5 on DG2 (Anusha)
- DG2 DMC firmware version bump to v2.07 (Madhumitha)
- New ADL-S PCI ID (José)
Refactoring and cleanups:
- Add display sub-struct to struct drm_i915_private (Jani)
- Add initial runtime info to device info (Jani)
- Split out HDCP and backlight registers to separate files (Jani)
Fixes:
- Skip wm/ddb readout for disabled pipes (Ville)
- HDMI port timing quirk for GLK ECS Liva Q2 (Diego Santa Cruz)
- Fix bw init null pointer dereference (Łukasz Bartosik)
- Disable PPS power hook for DP AUX backlight (Jouni)
- Avoid warnings on registering multiple backlight devices (Arun)
- Fix dual-link DSI backlight and CABC ports for display 11+ (Jani)
- Fix Type-C PHY ownership programming in HDMI legacy mode (Imre)
- Fix unclaimed register access while loading PIPEDMC-C/D (Imre)
- Bump up CDCLK for DG2 (Stan)
- Prune modes that require HDMI 2.1 FRL (Ankit)
- Disable FBC when PSR1 is enabled in display 12-13 (Matt)
- Fix TGL+ HDMI transcoder clock and DDI BUF disable order (Imre)
- Disable PSR before disable pipe (José)
- Disable DMC handlers during firmware loading/disabling on display 12+ (Imre)
- Disable clock gating for PIPEDMC-A/B as a workaround (Imre)
Merges:
- Two drm-next backmerges (Rodrigo, Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87k06rfaku.fsf@intel.com
Future platforms can read the IP version from a register and the
IP version numbers need not be hard coded in device info. Move the
ip version for media and display to runtime info.
On platforms where hard coding of IP version is required, update
the IP version in __runtime under device_info.
v2:
- Avoid name collision for ip versions(Jani)
v4.1:
- Fix build error in mock_gem_device.c
v4.2:
- Use ip instead of version for ip_vesion member.(MattR)
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220902221054.173524-1-radhakrishna.sripada@intel.com
Xe_LPM+ platforms have "standalone media." I.e., the media unit is
designed as an additional GT with its own engine list, GuC, forcewake,
etc. Let's allow platforms to include media GTs in their device info.
v2:
- Simplify GSI register handling and split it out to a separate patch
for ease of review. (Daniele)
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Acked-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906234934.3655440-13-matthew.d.roper@intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
UAPI Changes:
- Revert "drm/i915/dg2: Add preemption changes for Wa_14015141709"
The intent of Wa_14015141709 was to inform us that userspace can no
longer control object-level preemption as it has on past platforms
(i.e., by twiddling register bit CS_CHICKEN1[0]). The description of
the workaround in the spec wasn't terribly well-written, and when we
requested clarification from the hardware teams we were told that on the
kernel side we should also probably stop setting
FF_SLICE_CS_CHICKEN1[14], which is the register bit that directs the
hardware to honor the settings in per-context register CS_CHICKEN1. It
turns out that this guidance about FF_SLICE_CS_CHICKEN1[14] was a
mistake; even though CS_CHICKEN1[0] is non-operational and useless to
userspace, there are other bits in the register that do still work and
might need to be adjusted by userspace in the future (e.g., to implement
other workarounds that show up). If we don't set
FF_SLICE_CS_CHICKEN1[14] in i915, then those future workarounds would
not take effect.
Even more details at:
https://lists.freedesktop.org/archives/intel-gfx/2022-September/305478.html
Driver Changes:
- Align GuC/HuC firmware versioning scheme to kernel practices (John)
- Fix#6639: h264 hardware video decoding broken in 5.19 on Intel(R)
Celeron(R) N3060 (Nirmoy)
- Meteorlake (MTL) enabling (Matt R)
- GuC SLPC improvements (Vinay, Rodrigo)
- Add thread execution tuning setting for ATS-M (Matt R)
- Don't start PXP without mei_pxp bind (Juston)
- Remove leftover verbose debug logging from GuC error capture (John)
- Abort suspend on low system memory conditions (Nirmoy, Matt A, Chris)
- Add DG2 Wa_16014892111 (Matt R)
- Rename ggtt_view as gtt_view (Niranjana)
- Consider HAS_FLAT_CCS() in needs_ccs_pages (Matt A)
- Don't try to disable host RPS when this was never enabled. (Rodrigo)
- Clear stalled GuC CT request after a reset (Daniele)
- Remove runtime info printing from GuC time stamp logging (Jani)
- Skip Bit12 fw domain reset for gen12+ (Sushma, Radhakrishna)
- Make GuC log sizes runtime configurable (John)
- Selftest improvements (Daniele, Matt B, Andrzej)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YxshfqUN+vDe92Zn@jlahtine-mobl.ger.corp.intel.com
On client DG2 platforms, optimal performance is achieved with the
hardware's default "age based" thread execution setting. However on
ATS-M, switching this to "round robin after dependencies" provides
better performance. We'll add a new "tuning" feature flag to the ATS-M
device info to enable/disable this setting.
Bspec: 68331
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220826212718.409948-1-matthew.d.roper@intel.com
MTL introduces a second FBC engine. The two FBC engines can
operate entirely independently, FBC A serving pipe A and
FBC B serving pipe B.
The one place where things might go a bit wrong is the CFB
allocation from stolen. We might have to consider some change
to the allocation strategy to have a better chance of both
engines being able to allocate its CFB. Maybe FBC A should
allocate bottom up and FBC B top down, or something? For the
moment the allocation strategy is DRM_MM_INSERT_BEST for both.
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817122624.213889-1-jani.nikula@intel.com
For proper operation of i915 we need usable PCI GTTMMADDR BAR 0
(1 for GEN2). In most cases we also need usable PCI GFXMEM BAR 2.
Let's add functions to check if BARs are set, and that it have
a size greater than 0.
In case GTTMMADDR BAR, let's validate at the beginning of i915
initialization.
For other BARs, let's validate before first use.
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220805155959.1983584-3-piotr.piorkowski@intel.com
- All related to the Small BAR support: (and all by Matt Auld)
* add probed_cpu_visible_size
* expose the avail memory region tracking
* apply ALLOC_GPU only by default
* add NEEDS_CPU_ACCESS hint
* tweak error capture on recoverable contexts
Driver highlights:
- Add Small BAR support (Matt)
- Add MeteorLake support (RK)
- Add support for LMEM PCIe resizable BAR (Akeem)
Driver important fixes:
- ttm related fixes (Matt Auld)
- Fix a performance regression related to waitboost (Chris)
- Fix GT resets (Chris)
Driver others:
- Adding GuC SLPC selftest (Vinay)
- Fix ADL-N GuC load (Daniele)
- Add platform workaround (Gustavo, Matt Roper)
- DG2 and ATS-M device ID updates (Matt Roper)
- Add VM_BIND doc rfc with uAPI documentation (Niranjana)
- Fix user-after-free in vma destruction (Thomas)
- Async flush of GuC log regions (Alan)
- Fixes in selftests (Chris, Dan, Andrzej)
- Convert to drm_dbg (Umesh)
- Disable OA sseu config param for newer hardware (Umesh)
- Multi-cast register steering changes (Matt Roper)
- Add lmem_bar_size modparam (Priyanka)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmLPOTUACgkQ+mJfZA7r
E8rnPQf+NcelYE/Zmt5ExAkBoqECHBHvWbAZsJ4Ve7pxFQMoCn1vMWcpzHhizD8m
ga9ZLQ8cURcNst0Zrc73LLNPtZyqGu3tn9dhw+atIkmFjb4nJ40gvSyEwuPVOYiD
Z0JjcmU9cUfPiYTadHoY+yYGPh9LkF61nOxVZdEJ/ykeQZ1ThgDlFRpjfw7pteMp
SET3Iy1pZXGlJMmlOU9fJXivyN3yO6fO8xY2mqhiPbtf/HUapVpovNYleYBtJt3i
zS52DnuGGsC/gY+rhKfaQE/BfsXBhQK5fy39oZLKRz8uL7PXzYVV6bMAwnODqPwq
Q5+4C2J9M8jChfrkRJyD0TK6U80Zlw==
=l7gi
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-gt-next-2022-07-13' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Driver uAPI changes:
- All related to the Small BAR support: (and all by Matt Auld)
* add probed_cpu_visible_size
* expose the avail memory region tracking
* apply ALLOC_GPU only by default
* add NEEDS_CPU_ACCESS hint
* tweak error capture on recoverable contexts
Driver highlights:
- Add Small BAR support (Matt)
- Add MeteorLake support (RK)
- Add support for LMEM PCIe resizable BAR (Akeem)
Driver important fixes:
- ttm related fixes (Matt Auld)
- Fix a performance regression related to waitboost (Chris)
- Fix GT resets (Chris)
Driver others:
- Adding GuC SLPC selftest (Vinay)
- Fix ADL-N GuC load (Daniele)
- Add platform workaround (Gustavo, Matt Roper)
- DG2 and ATS-M device ID updates (Matt Roper)
- Add VM_BIND doc rfc with uAPI documentation (Niranjana)
- Fix user-after-free in vma destruction (Thomas)
- Async flush of GuC log regions (Alan)
- Fixes in selftests (Chris, Dan, Andrzej)
- Convert to drm_dbg (Umesh)
- Disable OA sseu config param for newer hardware (Umesh)
- Multi-cast register steering changes (Matt Roper)
- Add lmem_bar_size modparam (Priyanka)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Ys85pcMYLkqF/HtB@intel.com
Add Meteorlake PCI IDs. Split into M, and P subplatforms.
v2: Update PCI id's
v3: Move id 7d60 under MTL_M(MattR)
Bspec: 55420
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708000335.2869311-3-radhakrishna.sripada@intel.com
MTL has Xe_LPD+ display IP (version = 14), MTL graphics IP
(version = 12.70), and Xe_LPM+ media IP (version = 13).
Bspec: 55413
Bspec: 55416
Bspec: 55417
Bspec: 55418
Bspec: 55726
Bspec: 45544
Bspec: 65380
v2: rearrange the fields in pci_info(MattR)
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
[mattrope: Moved IS_METEORLAKE() higher in header]
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708000335.2869311-2-radhakrishna.sripada@intel.com
Small BAR support has now landed, which allows us to add the PCI IDs
that correspond to add-in card designs of DG2 and ATS-M. There's also
one additional MB-down PCI ID that recently appeared (0x5698) so we add
it too.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220701152231.529511-2-matthew.d.roper@intel.com
Ponte Vecchio no longer has MSLICE or LNCF steering, but the bspec does
document several new types of multicast register ranges. Fortunately,
most of the different MCR types all provide valid values at instance
(0,0) so there's no need to read fuse registers and calculate a
non-terminated instance. We'll lump all of those range types (BSLICE,
HALFBSLICE, TILEPSMI, CC, and L3BANK) into a single category called
"INSTANCE0" to keep things simple. We'll also perform explicit steering
for each of these multicast register types, even if the implicit
steering setup for COMPUTE/DSS ranges would have worked too; this is
based on guidance from our hardware architects who suggested that we
move away from implicit steering and start explicitly steer all MCR
register accesses on modern platforms (we'll work on transitioning
COMPUTE/DSS to explicit steering in the future).
Note that there's one additional MCR range type defined in the bspec
(SQIDI) that we don't handle here. Those ranges use a different
steering control register that we never touch; since instance 0 is also
always a valid setting there, we can just ignore those ranges.
Finally, we'll rename the HAS_MSLICES() macro to HAS_MSLICE_STEERING().
PVC hardware still has units referred to as mslices, but there's no
register steering based on mslice for this platform.
v2:
- Rebase on other recent changes
- Swap two table rows to keep table sorted & easy to read. (Harish)
Bspec: 67609
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220608170700.4026648-1-matthew.d.roper@intel.com
PVC splits the mask of enabled DSS over two registers. It also changes
the meaning of the EU fuse register such that each bit represents a
single EU rather than a pair of EUs.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601150725.521468-7-matthew.d.roper@intel.com
Although we already strip 3D-specific flags from PIPE_CONTROL
instructions when submitting to a compute engine, there are some
additional flags that need to be removed when the platform as a whole
lacks a 3D pipeline. Add those restrictions here.
v2:
- Replace LACKS_3D_PIPELINE checks with !HAS_3D_PIPELINE and add
has_3d_pipeline to all platforms except PVC. (Lucas)
Bspec: 47112
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511060228.1179450-4-matthew.d.roper@intel.com
Media ratio mode (the ability for media IP to work at a different frequency
from the GT) is available for a subset of dGfx platforms supporting
GuC/SLPC. Introduce 'has_media_ratio_mode' flag in intel_device_info to
identify these platforms and set it for XEHPSDV and DG2/ATS-M.
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519085732.1276255-1-tvrtko.ursulin@linux.intel.com
[tursulin: fixup merge conflict]
v2 (MattR):
- Clarify comment above RING_CMD_CCTL programming.
- Remove bspec reference from field definition. (Lucas)
- Add WARN if we try to use a (presumably uninitialized) wb_index of 0.
On most platforms 0 is an invalid MOCS entry and even on the ones
where it isn't, it isn't the right setting for wb_index. (Lucas)
Bspec: 45101, 72161
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Signed-off-by: Fei Yang <fei.yang@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505213812.3979301-4-matthew.d.roper@intel.com
No need to have this parameter in intel_device_info struct
as all platforms with display version 9 or newer has this feature.
As a side effect of the of removal this flag, it will not be printed
in dmesg during driver load anymore and developers will have to rely
on to check the macro and compare with platform being used and IP
versions of it.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505193524.276400-7-jose.souza@intel.com
No need to have this parameter in intel_device_info struct
as the requirement to support it is the DDI support.
As a side effect of the of removal this flag, it will not be printed
in dmesg during driver load anymore and developers will have to rely
on to check the macro and compare with platform being used and IP
versions of it.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505193524.276400-6-jose.souza@intel.com
No need to have this parameter in intel_device_info struct
as all platforms with display version 9 or newer, haswell or broadwell
supports it.
As a side effect of the of removal this flag, it will not be printed
in dmesg during driver load anymore and developers will have to rely
on to check the macro and compare with platform being used and IP
versions of it.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505193524.276400-5-jose.souza@intel.com
No need to have this parameter in intel_device_info struct
as all platforms with graphics version 11 or newer has this feature.
As a side effect of the of removal this flag, it will not be printed
in dmesg during driver load anymore and developers will have to rely
on to check the macro and compare with platform being used and IP
versions of it.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505193524.276400-4-jose.souza@intel.com
No need to have this parameter in intel_device_info struct
as all platforms with graphics version 7 or newer can reset engines.
As a side effect of the of removal this flag, it will not be printed
in dmesg during driver load anymore and developers will have to rely
on to check the macro and compare with platform being used and IP
versions of it.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505193524.276400-3-jose.souza@intel.com
No need to have this parameter in intel_device_info struct
as all platforms with graphics version 6 or newer have software
support for this feature.
As a side effect of the of removal this flag, it will not be printed
in dmesg during driver load anymore and developers will have to rely
on to check the macro and compare with platform being used and IP
versions of it.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505193524.276400-2-jose.souza@intel.com
No need to have this parameter in intel_device_info struct
as all platforms with graphics version 9 or newer has graphics
microcontroller.
As a side effect of the of removal this flag, it will not be printed
in dmesg during driver load anymore and developers will have to rely
on to check the macro and compare with platform being used and IP
versions of it.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505193524.276400-1-jose.souza@intel.com
The IDs added here are the subset reserved for 'motherboard down'
designs of DG2. We have all the necessary support upstream to enable
these now (although they'll continue to require force_probe until the
usual requirements are met).
The remaining DG2 IDs for add-in cards will come in a future patch once
some additional required functionality has fully landed.
Bspec: 44477
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220425211251.77154-3-matthew.d.roper@intel.com
DG2 uses different GSC offsets on memory bar
and uses PXP head (HECI1).
v2 (Daniele): Rebased to before the ATS patches
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> #v1
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220419193314.526966-7-daniele.ceraolospurio@intel.com
GSC is a graphics system controller, it provides
a chassis controller for graphics discrete cards.
There are two MEI interfaces in GSC: HECI1 and HECI2.
Both interfaces are on the BAR0 at offsets 0x00258000 and 0x00259000.
GSC is a GT Engine (class 4: instance 6). HECI1 interrupt is signaled
via bit 15 and HECI2 via bit 14 in the interrupt register.
This patch exports GSC as auxiliary device for mei driver to bind to
for HECI2 interface and prepares for HECI1 interface as
it will follow up soon.
CC: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220419193314.526966-2-daniele.ceraolospurio@intel.com
Adding initial PCI ids for RPL-P.
RPL-P behaves identically to ADL-P from i915's point of view.
Changes since V1 :
- SUBPLATFORM ADL_N and RPL_P clash as both are ADLP
based - Matthew R
Bspec: 55376
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
[mattrope: Corrected comment formatting to match coding style]
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220418062157.2974665-1-tejaskumarx.surendrakumar.upadhyay@intel.com
Sync up with v5.18-rc1, in particular to get 5e3094cfd9
("drm/i915/xehpsdv: Add has_flat_ccs to device info").
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
ATS-M is a server platform based on Xe_HPG and Xe_HPM, but without
display support. From a driver point of view, it's easiest to just
handle it as DG2 (including identifying as PLATFORM_DG2), but with the
display disabled in the device info.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329000822.1323195-1-matthew.d.roper@intel.com
Tile4 in bspec format is 4K tile organized into
64B subtiles with same basic shape as for legacy TileY
which will be supported by Display13.
v2: - Moved Tile4 associating struct for modifier/display to
the beginning(Imre Deak)
- Removed unneeded case I915_FORMAT_MOD_4_TILED modifier
checks(Imre Deak)
- Fixed I915_FORMAT_MOD_4_TILED to be 9 instead of 12
(Imre Deak)
v3: - Rebased patch on top of new changes related to plane_caps.
- Added static assert to check that PLANE_CTL_TILING_YF
matches PLANE_CTL_TILING_4(Nanley Chery)
- Fixed naming and layout description for Tile 4 in drm uapi
header(Nanley Chery)
v4: - Extracted drm_fourcc changes to separate patch(Nanley Chery)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220118115544.15116-3-stanislav.lisovskiy@intel.com
UAPI Changes:
- Weak parallel submission support for execlists
Minimal implementation of the parallel submission support for
execlists backend that was previously only implemented for GuC.
Support one sibling non-virtual engine.
Core Changes:
- Two backmerges of drm/drm-next for header file renames/changes and
i915_regs reorganization
Driver Changes:
- Add new DG2 subplatform: DG2-G12 (Matt R)
- Add new DG2 workarounds (Matt R, Ram, Bruce)
- Handle pre-programmed WOPCM registers for DG2+ (Daniele)
- Update guc shim control programming on XeHP SDV+ (Daniele)
- Add RPL-S C0/D0 stepping information (Anusha)
- Improve GuC ADS initialization to work on ARM64 on dGFX (Lucas)
- Fix KMD and GuC race on accessing PMU busyness (Umesh)
- Use PM timestamp instead of RING TIMESTAMP for reference in PMU with GuC (Umesh)
- Report error on invalid reset notification from GuC (John)
- Avoid WARN splat by holding RPM wakelock during PXP unbind (Juston)
- Fixes to parallel submission implementation (Matt B.)
- Improve GuC loading status check/error reports (John)
- Tweak TTM LRU priority hint selection (Matt A.)
- Align the plane_vma to min_page_size of stolen mem (Ram)
- Introduce vma resources and implement async unbinding (Thomas)
- Use struct vma_resource instead of struct vma_snapshot (Thomas)
- Return some TTM accel move errors instead of trying memcpy move (Thomas)
- Fix a race between vma / object destruction and unbinding (Thomas)
- Remove short-term pins from execbuf (Maarten)
- Update to GuC version 69.0.3 (John, Michal Wa.)
- Improvements to GT reset paths in GuC backend (Matt B.)
- Use shrinker_release_pages instead of writeback in shmem object hooks (Matt A., Tvrtko)
- Use trylock instead of blocking lock when freeing GEM objects (Maarten)
- Allocate intel_engine_coredump_alloc with ALLOW_FAIL (Matt B.)
- Fixes to object unmapping and purging (Matt A)
- Check for wedged device in GuC backend (John)
- Avoid lockdep splat by locking dpt_obj around set_cache_level (Maarten)
- Allow dead vm to unbind vma's without lock (Maarten)
- s/engine->i915/i915/ for DG2 engine workarounds (Matt R)
- Use to_gt() helper for GGTT accesses (Michal Wi.)
- Selftest improvements (Matt B., Thomas, Ram)
- Coding style and compiler warning fixes (Matt B., Jasmine, Andi, Colin, Gustavo, Dan)
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yg4i2aCZvvee5Eai@jlahtine-mobl.ger.corp.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Fixed conflicts while applying, using the fixups/drm-intel-gt-next.patch
from drm-rerere's 1f2b1742abdd ("2022y-02m-23d-16h-07m-57s UTC: drm-tip
rerere cache update")]
Platforms of XeHP and beyond support 3D surface (buffer) compression and
various compression formats. This is accomplished by an additional
compression control state (CCS) stored for each surface.
Gen 12 devices(TGL family and DG1) stores compression states in a separate
region of memory. It is managed by user-space and has an associated set of
user-space managed page tables used by hardware for address translation.
In Xe HP and beyond (XEHPSDV, DG2, etc), there is a new feature introduced
i.e Flat CCS. It replaced AUX page tables with a flat indexed region of
device memory for storing compression states.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218184752.7524-14-ramalingam.c@intel.com
Add a new platform flag, needs_compact_pt, to mark the requirement of
compact pt layout support for the ppGTT when using 64K GTT pages.
With this flag has_64k_pages will only indicate requirement of 64K
GTT page sizes or larger for device local memory access.
v6:
* minor doc formatting
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218184752.7524-6-ramalingam.c@intel.com
Include drm_fourcc.h, drm_plane.h, and drm_color_mgmt.h where needed, so
we can drop the includes for drm_atomic.h and drm_fourcc.h from
i915_drv.h, reducing the build dependencies.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b03711b2286396b2e9d5822f6adef4e7a6dc0f7b.1644507885.git.jani.nikula@intel.com
Several of our i915 header files, have been including i915_reg.h. This
means that any change to i915_reg.h will trigger a full rebuild of
pretty much every file of the driver, even those that don't have any
kind of register access. Let's delete the i915_reg.h include from all
headers and add an explicit include from the .c files that truly
need the register definitions; those that need a definition of
i915_reg_t for a function definition can get it from i915_reg_defs.h
instead.
We also remove two non-register #define's (VLV_DISPLAY_BASE and
GEN12_SFC_DONE_MAX) into i915_reg_defs.h to allow us to drop the
i915_reg.h include from a couple of headers.
There's probably a lot more header dependency optimization possible, but
the changes here roughly cut the number of files compiled after 'touch
i915_reg.h' in half --- a good first step.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-7-matthew.d.roper@intel.com
Catch-up with 5.17-rc2 and trying to align with drm-intel-gt-next
for a possible topic branch for merging the split of i915_regs...
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Starting from DG2, some of the programming previously done by i915 and
the GuC has been moved to the GSC and the relevant registers are no
longer writable by either CPU or GuC. This is also referred to as GuC
deprivilege.
On the i915 side, this affects the WOPCM registers: these are no longer
programmed by the driver and we do instead expect to find them already
set. This can lead to verification failures because in i915 we cheat a bit
with the WOPCM size defines, to keep the code common across platforms, by
sometimes using a smaller WOPCM size that the actual HW support (which isn't
a problem because the extra size is not needed if the FW fits in the smaller
chunk), while the pre-programmed values can use the actual size.
Given tha the new programming entity is trusted, relax the amount of the
checks done on the pre-programmed values by not limiting the max
programmed size. In the extremely unlikely scenario that the registers
have been misprogrammed, we will still fail later at DMA time.
v2: drop special case for DG2 G10 A0 (Alan)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120212947.3440448-1-daniele.ceraolospurio@intel.com
Driver Changes:
- Added bits of DG2 support around page table handling (Stuart Summers, Matthew Auld)
- Fixed wakeref leak in PMU busyness during reset in GuC mode (Umesh Nerlige Ramappa)
- Fixed debugfs access crash if GuC failed to load (John Harrison)
- Bring back GuC error log to error capture, undoing accidental earlier breakage (Thomas Hellström)
- Fixed memory leak in error capture caused by earlier refactoring (Thomas Hellström)
- Exclude reserved stolen from driver use (Chris Wilson)
- Add memory region sanity checking and optional full test (Chris Wilson)
- Fixed buffer size truncation in TTM shmemfs backend (Robert Beckett)
- Use correct lock and don't overwrite internal data structures when stealing GuC context ids (Matthew Brost)
- Don't hog IRQs when destroying GuC contexts (John Harrison)
- Make GuC to Host communication more robust (Matthew Brost)
- Continuation of locking refactoring around VMA and backing store handling (Maarten Lankhorst)
- Improve performance of reading GuC log from debugfs (John Harrison)
- Log when GuC fails to reset an engine (John Harrison)
- Speed up GuC/HuC firmware loading by requesting RP0 (Vinay Belgaumkar)
- Further work on asynchronous VMA unbinding (Thomas Hellström, Christian König)
- Refactor GuC/HuC firmware handling to prepare for future platforms (John Harrison)
- Prepare for future different GuC/HuC firmware signing key sizes (Daniele Ceraolo Spurio, Michal Wajdeczko)
- Add noreclaim annotations (Matthew Auld)
- Remove racey GEM_BUG_ON between GPU reset and GuC communication handling (Matthew Brost)
- Refactor i915->gt with to_gt(i915) to prepare for future platforms (Michał Winiarski, Andi Shyti)
- Increase GuC log size for CONFIG_DEBUG_GEM (John Harrison)
- Fixed engine busyness in selftests when in GuC mode (Umesh Nerlige Ramappa)
- Make engine parking work with PREEMPT_RT (Sebastian Andrzej Siewior)
- Replace X86_FEATURE_PAT with pat_enabled() (Lucas De Marchi)
- Selftest for stealing of guc ids (Matthew Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YcRvKO5cyPvIxVCi@tursulin-mobl2
Adding PCI device ids and enabling ADL-N platform.
ADL-N from i915 point of view is subplatform of ADL-P.
BSpec: 68397
Changes since V2:
- Added version log history
Changes since V1:
- replace IS_ALDERLAKE_N with IS_ADLP_N - Jani Nikula
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211210051802.4063958-1-tejaskumarx.surendrakumar.upadhyay@intel.com
drm/i915 feature pull #2 for v5.17:
Features and functionality:
- Add eDP privacy screen support (Hans)
- Add Raptor Lake S (RPL-S) support (Anusha)
- Add CD clock squashing support (Mika)
- Properly support ADL-P without force probe (Clint)
- Enable pipe color support (10 bit gamma) for display 13 platforms (Uma)
- Update ADL-P DMC firmware to v2.14 (Madhumitha)
Refactoring and cleanups:
- More FBC refactoring preparing for multiple FBC instances (Ville)
- Plane register cleanups (Ville)
- Header refactoring and include cleanups (Jani)
- Crtc helper and vblank wait function cleanups (Jani, Ville)
- Move pipe/transcoder/abox masks under intel_device_info.display (Ville)
Fixes:
- Add a delay to let eDP source OUI write take effect (Lyude)
- Use div32 version of MPLLB word clock for UHBR on SNPS PHY (Jani)
- Fix DMC firmware loader overflow check (Harshit Mogalapalli)
- Fully disable FBC on FIFO underruns (Ville)
- Disable FBC with double wide pipe as mutually exclusive (Ville)
- DG2 workarounds (Matt)
- Non-x86 build fixes (Siva)
- Fix HDR plane max width for NV12 (Vidya)
- Disable IRQ for selftest timestamp calculation (Anshuman)
- ADL-P VBT DDC pin mapping fix (Tejas)
Merges:
- Backmerge drm-next for privacy screen plumbing (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87ee6f5h9u.fsf@intel.com
Declare which FBC instances are present via a fbc_mask
in device info. For the moment there is just the one.
TODO: Need to figure out how to expose multiple FBC
instances in debugs. Just different file names, or move
the files under some subdirectory (per-crtc maybe), or
something else? This will need igt changes as well.
v2: Put the mask into device_info.display (Jani)
Put the magic pipe->fbc thing into skl_fbc_id_for_pipe() (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213134450.3082-4-ville.syrjala@linux.intel.com
Collect the dipslay related mask under the display sub-structure
in intel_device_info.
Note that there is a slight change in behaviour in that we zero
out .display entirely when !HAS_DISPLAY (aka. pipe_mask==0), so
now we also zero out the other masks (although cpu_transocder_mask
should already be zero of pipe_mask is zero). abox_mask is
only used by the display core init when HAS_DISPLAY is true, so
the actual behaviour of the system shouldn't change despite the
zeroing of these masks.
There is a lot more display stuff directly in device info that
could be moved over. Maybe someone else will be inspired to do it...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211210122726.12577-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Add a new platform flag, has_64k_pages, to mark the requirement of 64K
GTT page sizes or larger for device local memory access.
Also implies that we require or at least support the compact PT layout
for the ppGTT when using 64K GTT pages.
v2: More explanation for the flag [Thomas]
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211208141613.7251-2-ramalingam.c@intel.com
The upcoming privacy-screen support adds another check for
deferring probe till some other drivers have bound first.
Factor out the current vga_switcheroo_client_probe_defer() check
into an intel_modeset_probe_defer() helper, so that further
probe-deferral checks can be added there.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-10-hdegoede@redhat.com
Raptor Lake S(RPL-S) is a version 12
Display, Media and Render. For all i915
purposes it is the same as Alder Lake S (ADL-S).
Introduce RPL-S as a subplatform
of ADL-S. This patch adds PCI ids for RPL-S.
BSpec: 53655
Cc: x86@kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> # arch/x86
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211203063545.2254380-2-anusha.srivatsa@intel.com
XE_LPD has 128 Lut entries for Degamma, with additional 3 entries for
extended range. It has 511 entries for gamma with additional 2 entries
for extended range.
v2: Updated lut size for 10bit gamma, added lut_tests (Ville)
v3: Dropped the gamma lut tests fields (Ville)
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211207071135.3660332-4-uma.shankar@intel.com
Remove force probe protection from ADL_P platform. Did not obsevre
warnings, errors, flickering or any visual defects while doing ordinary
tasks like browsing and editing documents in a two monitor setup.
For more info drm-tip idle run results :
https://intel-gfx-ci.01.org/tree/drm-tip/drmtip.html?
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211204010140.22839-1-clinton.a.taylor@intel.com
TileF(Tile4 in bspec) format is 4K tile organized into
64B subtiles with same basic shape as for legacy TileY
which will be supported by Display13.
v2: - Fixed wrong case condition(Jani Nikula)
- Increased I915_FORMAT_MOD_F_TILED up to 12(Imre Deak)
v3: - s/I915_TILING_F/TILING_4/g
- s/I915_FORMAT_MOD_F_TILED/I915_FORMAT_MOD_4_TILED/g
- Removed unneeded fencing code
v4: - Rebased, fixed merge conflict with new table-oriented
format modifier checking(Stan)
- Replaced the rest of "Tile F" mentions to "Tile 4"(Stan)
v5: - Still had to remove some Tile F mentionings
- Moved has_4tile from adlp to DG2(Ramalingam C)
- Check specifically for DG2, but not the Display13(Imre)
v6: - Moved Tile4 associating struct for modifier/display to
the beginning(Imre Deak)
- Removed unneeded case I915_FORMAT_MOD_4_TILED modifier
checks(Imre Deak)
- Fixed I915_FORMAT_MOD_4_TILED to be 9 instead of 12
(Imre Deak)
v7: - Fixed display_ver to { 13, 13 }(Imre Deak)
- Removed redundant newline(Imre Deak)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211122211420.31584-1-stanislav.lisovskiy@intel.com
Turns out the DSB has trouble correctly loading the gamma LUT.
From a cursory look maybe like some entries do not load
properly, or they get loaded with some gibberish. Unfortunately
our current kms_color/etc. tests do not seem to catch this.
I had a brief look at the generated DSB batch and it looked
correct. Tried a few quick tricks like writing the index
register twice/etc. but didn't see any improvement.
Also tried switching to the 10bit gamma mode in case
there is yet another issue with the multi-segment mode, but
even the 10bit mode was showing issues.
Switching to mmio fixes all of it. I suppose one theory is that
maybe the DSB bangs on the LUT too quickly and it can't keep up
and instead some data either gets dropped or corrupted. To confirm
that someone should try to slow down the DSB's progress a bit.
Another thought was that maybe the LUT has crappy dual porting
and you get contention if you try to load it during active
scanout. But why then would the mmio path work, unless it's
just sufficiently slow?
Whatever the case, this is currently busted so let's disable
it until we get to the root of the problem.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3916
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014181856.17581-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Adding a structure to standardize access to IP versioning as future
platforms will have this information populated at runtime.
The constant platform display version is not using this new struct but
the runtime variant will definitely use it.
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Caz Yokoyama <caz.yokoyama@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020002353.193893-1-jose.souza@intel.com
UAPI Changes:
- Add uAPI for using PXP protected objects
Mesa changes: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8064
- Add PCI IDs and LMEM discovery/placement uAPI for DG1
Mesa changes: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11584
- Disable engine bonding on Gen12+ except TGL, RKL and ADL-S
Cross-subsystem Changes:
- Merges 'tip/locking/wwmutex' branch (core kernel tip)
- "mei: pxp: export pavp client to me client bus"
Core Changes:
- Update ttm_move_memcpy for async use (Thomas)
Driver Changes:
- Enable GuC submission by default on DG1 (Matt B)
- Add PXP (Protected Xe Path) support for Gen12 integrated (Daniele,
Sean, Anshuman)
See "drm/i915/pxp: add PXP documentation" for details!
- Remove force_probe protection for ADL-S (Raviteja)
- Add base support for XeHP/XeHP SDV (Matt R, Stuart, Lucas)
- Handle DRI_PRIME=1 on Intel igfx + Intel dgfx hybrid graphics setup (Tvrtko)
- Use Transparent Hugepages when IOMMU is enabled (Tvrtko, Chris)
- Implement LMEM backup and restore for suspend / resume (Thomas)
- Report INSTDONE_GEOM values in error state for DG2 (Matt R)
- Add DG2-specific shadow register table (Matt R)
- Update Gen11/Gen12/XeHP shadow register tables (Matt R)
- Maintain backward-compatible nested batch behavior on TGL+ (Matt R)
- Add new LRI reg offsets for DG2 (Akeem)
- Initialize unused MOCS entries to device specific values (Ayaz)
- Track and use the correct UC MOCS index on Gen12 (Ayaz)
- Add separate MOCS table for Gen12 devices other than TGL/RKL (Ayaz)
- Simplify the locking and eliminate some RCU usage (Daniel)
- Add some flushing for the 64K GTT path (Matt A)
- Mark GPU wedging on driver unregister unrecoverable (Janusz)
- Major rework in the GuC codebase, simplify locking and add docs (Matt B)
- Add DG1 GuC/HuC firmwares (Daniele, Matt B)
- Remember to call i915_sw_fence_fini on guc_state.blocked (Matt A)
- Use "gt" forcewake domain name for error messages instead of "blitter" (Matt R)
- Drop now duplicate LMEM uAPI RFC kerneldoc section (Daniel)
- Fix early tracepoints for requests (Matt A)
- Use locked access to ctx->engines in set_priority (Daniel)
- Convert gen6/gen7/gen8 read operations to fwtable (Matt R)
- Drop gen11/gen12 specific mmio write handlers (Matt R)
- Drop gen11 specific mmio read handlers (Matt R)
- Use designated initializers for init/exit table (Kees)
- Fix syncmap memory leak (Matt B)
- Add pretty printing for buddy allocator state debug (Matt A)
- Fix potential error pointer dereference in pinned_context() (Dan)
- Remove IS_ACTIVE macro (Lucas)
- Static code checker fixes (Nathan)
- Clean up disabled warnings (Nathan)
- Increase timeout in i915_gem_contexts selftests 5x for GuC submission (Matt B)
- Ensure wa_init_finish() is called for ctx workaround list (Matt R)
- Initialize L3CC table in mocs init (Sreedhar, Ayaz, Ram)
- Get PM ref before accessing HW register (Vinay)
- Move __i915_gem_free_object to ttm_bo_destroy (Maarten)
- Deduplicate frequency dump on debugfs (Lucas)
- Make wa list per-gt (Venkata)
- Do not define dummy vma in stack (Venkata)
- Take pinning into account in __i915_gem_object_is_lmem (Matt B, Thomas)
- Do not report currently active engine when describing objects (Tvrtko)
- Fix pdfdocs build error by removing nested grid from GuC docs (Akira)
- Remove false warning from the rps worker (Tejas)
- Flush buffer pools on driver remove (Janusz)
- Fix runtime pm handling in i915_gem_shrink (Maarten)
- Rework TTM object initialization slightly (Thomas)
- Use fixed offset for PTEs location (Michal Wa)
- Verify result from CTB (de)register action and improve error messages (Michal Wa)
- Fix bug in user proto-context creation that leaked contexts (Matt B)
- Re-use Gen11 forcewake read functions on Gen12 (Matt R)
- Make shadow tables range-based (Matt R)
- Ditch the i915_gem_ww_ctx loop member (Thomas, Maarten)
- Use NULL instead of 0 where appropriate (Ville)
- Rename pci/debugfs functions to respect file prefix (Jani, Lucas)
- Drop guc_communication_enabled (Daniele)
- Selftest fixes (Thomas, Daniel, Matt A, Maarten)
- Clean up inconsistent indenting (Colin)
- Use direction definition DMA_BIDIRECTIONAL instead of
PCI_DMA_BIDIRECTIONAL (Cai)
- Add "intel_" as prefix in set_mocs_index() (Ayaz)
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YWAO80MB2eyToYoy@jlahtine-mobl.ger.corp.intel.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
Close the divergence which has caused patches not to apply and
have a solid baseline for the PXP patches that Rodrigo will send
a topic branch PR for.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Removing force probe protection from ADLS platform. Did
not observe warnings, errors, flickering or any visual
defects while doing ordinary tasks like browsing and
editing documents in a two monitor setup.
For more info drm-tip idle run results :
https://intel-gfx-ci.01.org/tree/drm-tip/bat-all.html?
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: ravitejax <ravitejax.goud.talla@intel.com>
Reviewed-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903182034.668467-1-ravitejax.gpud.talla@intel.com
At this point is sure that HSW and BDW will never have PSR enabled by
default, so here dropping it from device info and cleaning up code.
v2:
- enable psr support for display 9
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210827174253.51122-1-jose.souza@intel.com
Follow the usual naming conventions. While at it, fix i915_pci.h SPDX
license comment format and add header include guards.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210825150623.28980-1-jani.nikula@intel.com
This was added in commit 05e265841f ("drm/i915/dg1: add initial DG-1
definitions") so we could continue to add support for DG1 without
risk to expose a broken UAPI. Now that we added DG1 to the PCI ID list
i915 may bind to, remove the leftover.
Fixes: d5ef86b38e ("drm/i915: Add pci ids and uapi for DG1")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819210349.95103-1-lucas.demarchi@intel.com
DG1 has support for local memory, which requires the usage of the
lmem placement extension for creating bo's, and memregion queries
to obtain the size. Because of this, those parts of the uapi are
no longer guarded behind FAKE_LMEM.
According to the pull request referenced below, mesa should be mostly
ready for DG1. VK_EXT_memory_budget is not hooked up yet, but we
should definitely just enable the uapi parts by default.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
References: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11584
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210812124452.622233-2-maarten.lankhorst@linux.intel.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
UAPI Changes:
- Add I915_MMAP_OFFSET_FIXED
On devices with local memory `I915_MMAP_OFFSET_FIXED` is the only valid
type. On devices without local memory, this caching mode is invalid.
As caching mode when specifying `I915_MMAP_OFFSET_FIXED`, WC or WB will
be used, depending on the object placement on creation. WB will be used
when the object can only exist in system memory, WC otherwise.
Userspace: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11888
- Reinstate the mmap ioctl for (already released) integrated Gen12 platforms
Rationale: Otherwise media driver breaks eg. for ADL-P. Long term goal is
still to sunset the IOCTL even for integrated and require using mmap_offset.
- Reject caching/set_domain IOCTLs on discrete
Expected to become immutable property of the BO
- Disallow changing context parameters after first use on Gen12 and earlier
- Require setting context parameters at creation on platforms after Gen12
Rationale (for both): Allow less dynamic changes to the context to simplify
the implementation and avoid user shooting theirselves in the foot.
- Drop I915_CONTEXT_PARAM_RINGSIZE
Userspace PR for compute-driver has not been merged
- Drop I915_CONTEXT_PARAM_NO_ZEROMAP
Userspace PR for libdrm / Beignet was never landed
- Drop CONTEXT_CLONE API
Userspace PR for Mesa was never landed
- Drop getparam support for I915_CONTEXT_PARAM_ENGINES
Only existed for symmetry wrt. setparam, never used.
- Disallow bonding of virtual engines
Drop the prep work, no hardware has been released needing it.
- (Implicit) Disable gpu relocations
Media userspace was the last userspace to still use them. They
have converted so performance can be regained with an update.
Core Changes:
- Merge topic branch 'topic/i915-ttm-2021-06-11' (from Maarten)
- Merge topic branch 'topic/revid_steppings' (from Matt R)
- Merge topic branch 'topic/xehp-dg2-definitions-2021-07-21' (from Matt R)
- Backmerges drm-next (Rodrigo)
Driver Changes:
- Initial workarounds for ADL-P (Clint)
- Preliminary code for XeHP/DG2 (Stuart, Umesh, Matt R, Prathap, Ram,
Venkata, Akeem, Tvrtko, John, Lucas)
- Fix ADL-S DMA mask size to 39 bits (Tejas)
- Remove code for CNL (Lucas)
- Add ADL-P GuC/HuC firmwares (John)
- Update HuC to 7.9.3 for TGL/ADL-S/RKL (John)
- Fix -EDEADLK handling regression (Ville)
- Implement Wa_1508744258 for DG1 and Gen12 iGFX (Jose)
- Extend Wa_1406941453 to ADL-S (Jose)
- Drop unnecessary workarounds per stepping for SKL/BXT/ICL (Matt R)
- Use fuse info to enable SFC on Gen12 (Venkata)
- Unconditionally flush the pages on acquire on EHL/JSL (Matt A)
- Probe existence of backing struct pages upon userptr creation (Chris, Matt A)
- Add an intermediate GEM proto-context to delay real context creation (Jason)
- Implement SINGLE_TIMELINE with a syncobj (Jason)
- Set the watchdog timeout directly in intel_context_set_gem (Jason)
- Disallow userspace from creating contexts with too many engines (Jason)
- Revert "drm/i915/gem: Asynchronous cmdparser" (Jason)
- Revert "drm/i915: Propagate errors on awaiting already signaled fences" (Jason)
- Revert "drm/i915: Skip over MI_NOOP when parsing" (Jason)
- Revert "drm/i915: Shrink the GEM kmem_caches upon idling" (Daniel)
- Always let TTM handle object migration (Jason)
- Correct the locking and pin pattern for dma-buf (Thomas H, Michael R, Jason)
- Migrate to system at dma-buf attach time (Thomas, Michael R)
- MAJOR refactoring of the GuC backend code to allow for enabling on Gen11+
(Matt B, John, Michal Wa., Fernando, Daniele, Vinay)
- Update GuC firmware interface to v62.0.0 (John, Michal Wa., Matt B)
- Add GuCRC feature to hand over the control of HW RC6 to the GuC on
Gen12+ when GuC submission is enabled (Vinay, Sujaritha, Daniele,
John, Tvrtko)
- Use the correct IRQ during resume and eliminate DRM IRQ midlayer (Thomas Z)
- Add pipelined page migration and clearing (Chris, Thomas H)
- Use TTM for system memory on discrete (Thomas H)
- Implement object migration for display vs. dma-buf (Thomas H)
- Perform execbuffer object locking as a separate step (Thomas H)
- Add support for explicit L3BANK steering (Matt, Daniele)
- Remove duplicated call to ops->pread (Daniel)
- Fix pagefault disabling in the first execbuf slowpath (Daniel)
- Simplify userptr locking (Thomas H)
- Improvements to the GuC CTB code (Matt B, John)
- Make GT workaround upper bounds exclusive (Matt R)
- Check for nomodeset in i915_init() first (Daniel)
- Delete now unused gpu reloc code (Daniel)
- Document RFC plans for GuC submission, DRM scheduler and new parallel
submit uAPI (Matt B)
- Reintroduce buddy allocator this time with TTM (Matt A)
- Support forcing page size with LMEM (Matt A)
- Add i915_sched_engine to abstract a submission queue between backends (Matt B)
- Use accelerated move in TTM (Ram)
- Fix memory leaks from TTM backend (Thomas H)
- Introduce WW transaction helper (Thomas H)
- Improve debug Kconfig texts a bit (Daniel)
- Unify user object creation code (Jason)
- Use a table for i915_init/exit (Jason)
- Move slabs to module init/exit (Daniel)
- Remove now unused i915_globals (Daniel)
- Extract i915_module.c (Daniel)
- Consistently use adl-p/adl-s in WA comments (Jose)
- Finish INTEL_GEN and friends conversion (Lucas)
- Correct variable/function namings (Lucas)
- Code checker fixes (Wan, Matt A)
- Tracepoint improvements (Matt B)
- Kerneldoc improvements (Tvrtko, Jason, Matt A, Maarten)
- Selftest improvements (Chris, Matt A, Tejas, Thomas H, John, Matt B,
Rahul, Vinay)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YQ0JmYiXhGskNcrI@jlahtine-mobl.ger.corp.intel.com
Xe_HP is more modular than its predecessors and as a consequence it has
more types of replicated registers. As with l3bank regions on previous
platforms, we may need to explicitly re-steer accesses to these new
types of ranges at runtime if we can't find a single default steering
value that satisfies the fusing of all types.
v2:
- Add a local 'i915' variable to reduce gt->i915 usage. (Caz)
- Drop unused 'intel_gt_read_register' prototype. (Caz)
v3:
- Drop unnecessary comment text. (Lucas)
- Drop unused register bit definition. (Lucas)
Bspec: 66534
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Caz Yokoyama <caz.yokoyama@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729170008.2836648-2-matthew.d.roper@intel.com
With all the users removed, finish removing the CNL platform definitions.
We will leave the PCI IDs around as those are exposed to userspace.
Even if mesa doesn't support CNL anymore, let's avoid build breakages
due to changing the headers.
Also, due to drm/i915/gt still using IS_CANNONLAKE() let's just redefine
it instead of removing.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728215946.1573015-26-lucas.demarchi@intel.com
The module init code is somewhat misplaced in i915_pci.c, since it
needs to pull in init/exit functions from every part of the driver and
pollutes the include list a lot.
Extract an i915_module.c file which pulls all the bits together, and
allows us to massively trim the include list of i915_pci.c.
The downside is that have to drop the error path check Jason added to
catch when we set up the pci driver too early. I think that risk is
acceptable for this pretty nice include.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727121037.2041102-11-daniel.vetter@ffwll.ch
With the global kmem_cache shrink infrastructure gone there's nothing
special and we can convert them over.
I'm doing this split up into each patch because there's quite a bit of
noise with removing the static global.slab_vmas to just a
slab_vmas.
We have to keep i915_drv.h include in i915_globals otherwise there's
nothing anymore that pulls in GEM_BUG_ON.
v2: Make slab static (Jason, 0day)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727121037.2041102-9-daniel.vetter@ffwll.ch
With the global kmem_cache shrink infrastructure gone there's nothing
special and we can convert them over.
I'm doing this split up into each patch because there's quite a bit of
noise with removing the static global.slab_dependencies|priorities to just a
slab_dependencies|priorities.
v2: Make slab static (Jason, 0day)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727121037.2041102-8-daniel.vetter@ffwll.ch
With the global kmem_cache shrink infrastructure gone there's nothing
special and we can convert them over.
I'm doing this split up into each patch because there's quite a bit of
noise with removing the static global.slab_requests|execute_cbs to just a
slab_requests|execute_cbs.
v2: Make slab static (Jason, 0day)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727121037.2041102-7-daniel.vetter@ffwll.ch
