Move all potential to-be-saved PMU MSRs into a separate array so that a
future patch can easily omit all PMU MSRs from the list when the PMU is
disabled.
No functional change intended.
Link: https://lore.kernel.org/r/20230124234905.3774678-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add helpers to print unimplemented MSR accesses and condition all such
prints on report_ignored_msrs, i.e. honor userspace's request to not
print unimplemented MSRs. Even though vcpu_unimpl() is ratelimited,
printing can still be problematic, e.g. if a print gets stalled when host
userspace is writing MSRs during live migration, an effective stall can
result in very noticeable disruption in the guest.
E.g. the profile below was taken while calling KVM_SET_MSRS on the PMU
counters while the PMU was disabled in KVM.
- 99.75% 0.00% [.] __ioctl
- __ioctl
- 99.74% entry_SYSCALL_64_after_hwframe
do_syscall_64
sys_ioctl
- do_vfs_ioctl
- 92.48% kvm_vcpu_ioctl
- kvm_arch_vcpu_ioctl
- 85.12% kvm_set_msr_ignored_check
svm_set_msr
kvm_set_msr_common
printk
vprintk_func
vprintk_default
vprintk_emit
console_unlock
call_console_drivers
univ8250_console_write
serial8250_console_write
uart_console_write
Reported-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20230124234905.3774678-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Limit kvm_pmu_cap.num_counters_gp during kvm_init_pmu_capability() based
on the vendor PMU capabilities so that consuming num_counters_gp naturally
does the right thing. This fixes a mostly theoretical bug where KVM could
over-report its PMU support in KVM_GET_SUPPORTED_CPUID for leaf 0xA, e.g.
if the number of counters reported by perf is greater than KVM's
hardcoded internal limit. Incorporating input from the AMD PMU also
avoids over-reporting MSRs to save when running on AMD.
Link: https://lore.kernel.org/r/20230124234905.3774678-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add the AMD Automatic IBRS feature bit to those being propagated to the guest,
and enable the guest EFER bit.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230124163319.2277355-9-kim.phillips@amd.com
Avoid type casts that are needed for IS_ERR() and use
IS_ERR_VALUE() instead.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202211161718436948912@zte.com.cn
Signed-off-by: Sean Christopherson <seanjc@google.com>
When building a list of filter events, it can sometimes be a challenge
to fit all the events needed to adequately restrict the guest into the
limited space available in the pmu event filter. This stems from the
fact that the pmu event filter requires each event (i.e. event select +
unit mask) be listed, when the intention might be to restrict the
event select all together, regardless of it's unit mask. Instead of
increasing the number of filter events in the pmu event filter, add a
new encoding that is able to do a more generalized match on the unit mask.
Introduce masked events as another encoding the pmu event filter
understands. Masked events has the fields: mask, match, and exclude.
When filtering based on these events, the mask is applied to the guest's
unit mask to see if it matches the match value (i.e. umask & mask ==
match). The exclude bit can then be used to exclude events from that
match. E.g. for a given event select, if it's easier to say which unit
mask values shouldn't be filtered, a masked event can be set up to match
all possible unit mask values, then another masked event can be set up to
match the unit mask values that shouldn't be filtered.
Userspace can query to see if this feature exists by looking for the
capability, KVM_CAP_PMU_EVENT_MASKED_EVENTS.
This feature is enabled by setting the flags field in the pmu event
filter to KVM_PMU_EVENT_FLAG_MASKED_EVENTS.
Events can be encoded by using KVM_PMU_ENCODE_MASKED_ENTRY().
It is an error to have a bit set outside the valid bits for a masked
event, and calls to KVM_SET_PMU_EVENT_FILTER will return -EINVAL in
such cases, including the high bits of the event select (35:32) if
called on Intel.
With these updates the filter matching code has been updated to match on
a common event. Masked events were flexible enough to handle both event
types, so they were used as the common event. This changes how guest
events get filtered because regardless of the type of event used in the
uAPI, they will be converted to masked events. Because of this there
could be a slight performance hit because instead of matching the filter
event with a lookup on event select + unit mask, it does a lookup on event
select then walks the unit masks to find the match. This shouldn't be a
big problem because I would expect the set of common event selects to be
small, and if they aren't the set can likely be reduced by using masked
events to generalize the unit mask. Using one type of event when
filtering guest events allows for a common code path to be used.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20221220161236.555143-5-aaronlewis@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The scaling information in subleaf 1 should match the values set by KVM in
the 'vcpu_info' sub-structure 'time_info' (a.k.a. pvclock_vcpu_time_info)
which is shared with the guest, but is not directly available to the VMM.
The offset values are not set since a TSC offset is already applied.
The TSC frequency should also be set in sub-leaf 2.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20230106103600.528-3-pdurrant@amazon.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop cpu_dirty_logging_count in favor of nr_memslots_dirty_logging.
Both fields count the number of memslots that have dirty-logging enabled,
with the only difference being that cpu_dirty_logging_count is only
incremented when using PML. So while nr_memslots_dirty_logging is not a
direct replacement for cpu_dirty_logging_count, it can be combined with
enable_pml to get the same information.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20230105214303.2919415-1-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The first half or so patches fix semi-urgent, real-world relevant APICv
and AVIC bugs.
The second half fixes a variety of AVIC and optimized APIC map bugs
where KVM doesn't play nice with various edge cases that are
architecturally legal(ish), but are unlikely to occur in most real world
scenarios
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Track the per-vendor required APICv inhibits with a variable instead of
calling into vendor code every time KVM wants to query the set of
required inhibits. The required inhibits are a property of the vendor's
virtualization architecture, i.e. are 100% static.
Using a variable allows the compiler to inline the check, e.g. generate
a single-uop TEST+Jcc, and thus eliminates any desire to avoid checking
inhibits for performance reasons.
No functional change intended.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230106011306.85230-32-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Free the APIC access page memslot if any vCPU enables x2APIC and SVM's
AVIC is enabled to prevent accesses to the virtual APIC on vCPUs with
x2APIC enabled. On AMD, if its "hybrid" mode is enabled (AVIC is enabled
when x2APIC is enabled even without x2AVIC support), keeping the APIC
access page memslot results in the guest being able to access the virtual
APIC page as x2APIC is fully emulated by KVM. I.e. hardware isn't aware
that the guest is operating in x2APIC mode.
Exempt nested SVM's update of APICv state from the new logic as x2APIC
can't be toggled on VM-Exit. In practice, invoking the x2APIC logic
should be harmless precisely because it should be a glorified nop, but
play it safe to avoid latent bugs, e.g. with dropping the vCPU's SRCU
lock.
Intel doesn't suffer from the same issue as APICv has fully independent
VMCS controls for xAPIC vs. x2APIC virtualization. Technically, KVM
should provide bus error semantics and not memory semantics for the APIC
page when x2APIC is enabled, but KVM already provides memory semantics in
other scenarios, e.g. if APICv/AVIC is enabled and the APIC is hardware
disabled (via APIC_BASE MSR).
Note, checking apic_access_memslot_enabled without taking locks relies
it being set during vCPU creation (before kvm_vcpu_reset()). vCPUs can
race to set the inhibit and delete the memslot, i.e. can get false
positives, but can't get false negatives as apic_access_memslot_enabled
can't be toggled "on" once any vCPU reaches KVM_RUN.
Opportunistically drop the "can" while updating avic_activate_vmcb()'s
comment, i.e. to state that KVM _does_ support the hybrid mode. Move
the "Note:" down a line to conform to preferred kernel/KVM multi-line
comment style.
Opportunistically update the apicv_update_lock comment, as it isn't
actually used to protect apic_access_memslot_enabled (which is protected
by slots_lock).
Fixes: 0e311d33bf ("KVM: SVM: Introduce hybrid-AVIC mode")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20230106011306.85230-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disable CPU hotplug when enabling/disabling hardware to prevent the
corner case where if the following sequence occurs:
1. A hotplugged CPU marks itself online in cpu_online_mask
2. The hotplugged CPU enables interrupt before invoking KVM's ONLINE
callback
3 hardware_{en,dis}able_all() is invoked on another CPU
the hotplugged CPU will be included in on_each_cpu() and thus get sent
through hardware_{en,dis}able_nolock() before kvm_online_cpu() is called.
start_secondary { ...
set_cpu_online(smp_processor_id(), true); <- 1
...
local_irq_enable(); <- 2
...
cpu_startup_entry(CPUHP_AP_ONLINE_IDLE); <- 3
}
KVM currently fudges around this race by keeping track of which CPUs have
done hardware enabling (see commit 1b6c016818 "KVM: Keep track of which
cpus have virtualization enabled"), but that's an inefficient, convoluted,
and hacky solution.
Signed-off-by: Chao Gao <chao.gao@intel.com>
[sean: split to separate patch, write changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-43-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CPU STARTING section doesn't allow callbacks to fail. Move KVM's
hotplug callback to ONLINE section so that it can abort onlining a CPU in
certain cases to avoid potentially breaking VMs running on existing CPUs.
For example, when KVM fails to enable hardware virtualization on the
hotplugged CPU.
Place KVM's hotplug state before CPUHP_AP_SCHED_WAIT_EMPTY as it ensures
when offlining a CPU, all user tasks and non-pinned kernel tasks have left
the CPU, i.e. there cannot be a vCPU task around. So, it is safe for KVM's
CPU offline callback to disable hardware virtualization at that point.
Likewise, KVM's online callback can enable hardware virtualization before
any vCPU task gets a chance to run on hotplugged CPUs.
Drop kvm_x86_check_processor_compatibility()'s WARN that IRQs are
disabled, as the ONLINE section runs with IRQs disabled. The WARN wasn't
intended to be a requirement, e.g. disabling preemption is sufficient,
the IRQ thing was purely an aggressive sanity check since the helper was
only ever invoked via SMP function call.
Rename KVM's CPU hotplug callbacks accordingly.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
[sean: drop WARN that IRQs are disabled]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-42-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do compatibility checks when enabling hardware to effectively add
compatibility checks when onlining a CPU. Abort enabling, i.e. the
online process, if the (hotplugged) CPU is incompatible with the known
good setup.
At init time, KVM does compatibility checks to ensure that all online
CPUs support hardware virtualization and a common set of features. But
KVM uses hotplugged CPUs without such compatibility checks. On Intel
CPUs, this leads to #GP if the hotplugged CPU doesn't support VMX, or
VM-Entry failure if the hotplugged CPU doesn't support all features
enabled by KVM.
Note, this is little more than a NOP on SVM, as SVM already checks for
full SVM support during hardware enabling.
Opportunistically add a pr_err() if setup_vmcs_config() fails, and
tweak all error messages to output which CPU failed.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Message-Id: <20221130230934.1014142-41-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the .check_processor_compatibility() callback from kvm_x86_init_ops
to kvm_x86_ops to allow a future patch to do compatibility checks during
CPU hotplug.
Do kvm_ops_update() before compat checks so that static_call() can be
used during compat checks.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-Id: <20221130230934.1014142-40-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do basic VMX/SVM support checks directly in vendor code instead of
implementing them via kvm_x86_ops hooks. Beyond the superficial benefit
of providing common messages, which isn't even clearly a net positive
since vendor code can provide more precise/detailed messages, there's
zero advantage to bouncing through common x86 code.
Consolidating the checks will also simplify performing the checks
across all CPUs (in a future patch).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-37-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Define pr_fmt using KBUILD_MODNAME for all KVM x86 code so that printks
use consistent formatting across common x86, Intel, and AMD code. In
addition to providing consistent print formatting, using KBUILD_MODNAME,
e.g. kvm_amd and kvm_intel, allows referencing SVM and VMX (and SEV and
SGX and ...) as technologies without generating weird messages, and
without causing naming conflicts with other kernel code, e.g. "SEV: ",
"tdx: ", "sgx: " etc.. are all used by the kernel for non-KVM subsystems.
Opportunistically move away from printk() for prints that need to be
modified anyways, e.g. to drop a manual "kvm: " prefix.
Opportunistically convert a few SGX WARNs that are similarly modified to
WARN_ONCE; in the very unlikely event that the WARNs fire, odds are good
that they would fire repeatedly and spam the kernel log without providing
unique information in each print.
Note, defining pr_fmt yields undesirable results for code that uses KVM's
printk wrappers, e.g. vcpu_unimpl(). But, that's a pre-existing problem
as SVM/kvm_amd already defines a pr_fmt, and thankfully use of KVM's
wrappers is relatively limited in KVM x86 code.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20221130230934.1014142-35-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop kvm_arch_check_processor_compat() and its support code now that all
architecture implementations are nops.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Farman <farman@linux.ibm.com> # s390
Acked-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-Id: <20221130230934.1014142-33-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the CPU compatibility checks to pure x86 code, i.e. drop x86's use
of the common kvm_x86_check_cpu_compat() arch hook. x86 is the only
architecture that "needs" to do per-CPU compatibility checks, moving
the logic to x86 will allow dropping the common code, and will also
give x86 more control over when/how the compatibility checks are
performed, e.g. TDX will need to enable hardware (do VMXON) in order to
perform compatibility checks.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-Id: <20221130230934.1014142-32-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop kvm_arch_init() and kvm_arch_exit() now that all implementations
are nops.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com> # s390
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Anup Patel <anup@brainfault.org>
Message-Id: <20221130230934.1014142-30-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acquire a new mutex, vendor_module_lock, in kvm_x86_vendor_init() while
doing hardware setup to ensure that concurrent calls are fully serialized.
KVM rejects attempts to load vendor modules if a different module has
already been loaded, but doesn't handle the case where multiple vendor
modules are loaded at the same time, and module_init() doesn't run under
the global module_mutex.
Note, in practice, this is likely a benign bug as no platform exists that
supports both SVM and VMX, i.e. barring a weird VM setup, one of the
vendor modules is guaranteed to fail a support check before modifying
common KVM state.
Alternatively, KVM could perform an atomic CMPXCHG on .hardware_enable,
but that comes with its own ugliness as it would require setting
.hardware_enable before success is guaranteed, e.g. attempting to load
the "wrong" could result in spurious failure to load the "right" module.
Introduce a new mutex as using kvm_lock is extremely deadlock prone due
to kvm_lock being taken under cpus_write_lock(), and in the future, under
under cpus_read_lock(). Any operation that takes cpus_read_lock() while
holding kvm_lock would potentially deadlock, e.g. kvm_timer_init() takes
cpus_read_lock() to register a callback. In theory, KVM could avoid
such problematic paths, i.e. do less setup under kvm_lock, but avoiding
all calls to cpus_read_lock() is subtly difficult and thus fragile. E.g.
updating static calls also acquires cpus_read_lock().
Inverting the lock ordering, i.e. always taking kvm_lock outside
cpus_read_lock(), is not a viable option as kvm_lock is taken in various
callbacks that may be invoked under cpus_read_lock(), e.g. x86's
kvmclock_cpufreq_notifier().
The lockdep splat below is dependent on future patches to take
cpus_read_lock() in hardware_enable_all(), but as above, deadlock is
already is already possible.
======================================================
WARNING: possible circular locking dependency detected
6.0.0-smp--7ec93244f194-init2 #27 Tainted: G O
------------------------------------------------------
stable/251833 is trying to acquire lock:
ffffffffc097ea28 (kvm_lock){+.+.}-{3:3}, at: hardware_enable_all+0x1f/0xc0 [kvm]
but task is already holding lock:
ffffffffa2456828 (cpu_hotplug_lock){++++}-{0:0}, at: hardware_enable_all+0xf/0xc0 [kvm]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (cpu_hotplug_lock){++++}-{0:0}:
cpus_read_lock+0x2a/0xa0
__cpuhp_setup_state+0x2b/0x60
__kvm_x86_vendor_init+0x16a/0x1870 [kvm]
kvm_x86_vendor_init+0x23/0x40 [kvm]
0xffffffffc0a4d02b
do_one_initcall+0x110/0x200
do_init_module+0x4f/0x250
load_module+0x1730/0x18f0
__se_sys_finit_module+0xca/0x100
__x64_sys_finit_module+0x1d/0x20
do_syscall_64+0x3d/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
-> #0 (kvm_lock){+.+.}-{3:3}:
__lock_acquire+0x16f4/0x30d0
lock_acquire+0xb2/0x190
__mutex_lock+0x98/0x6f0
mutex_lock_nested+0x1b/0x20
hardware_enable_all+0x1f/0xc0 [kvm]
kvm_dev_ioctl+0x45e/0x930 [kvm]
__se_sys_ioctl+0x77/0xc0
__x64_sys_ioctl+0x1d/0x20
do_syscall_64+0x3d/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(cpu_hotplug_lock);
lock(kvm_lock);
lock(cpu_hotplug_lock);
lock(kvm_lock);
*** DEADLOCK ***
1 lock held by stable/251833:
#0: ffffffffa2456828 (cpu_hotplug_lock){++++}-{0:0}, at: hardware_enable_all+0xf/0xc0 [kvm]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-16-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the guts of kvm_arch_init() to a new helper, kvm_x86_vendor_init(),
so that VMX can do _all_ arch and vendor initialization before calling
kvm_init(). Calling kvm_init() must be the _very_ last step during init,
as kvm_init() exposes /dev/kvm to userspace, i.e. allows creating VMs.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop kvm_arch_hardware_setup() and kvm_arch_hardware_unsetup() now that
all implementations are nops.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com> # s390
Acked-by: Anup Patel <anup@brainfault.org>
Message-Id: <20221130230934.1014142-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that kvm_arch_hardware_setup() is called immediately after
kvm_arch_init(), fold the guts of kvm_arch_hardware_(un)setup() into
kvm_arch_{init,exit}() as a step towards dropping one of the hooks.
To avoid having to unwind various setup, e.g registration of several
notifiers, slot in the vendor hardware setup before the registration of
said notifiers and callbacks. Introducing a functional change while
moving code is less than ideal, but the alternative is adding a pile of
unwinding code, which is much more error prone, e.g. several attempts to
move the setup code verbatim all introduced bugs.
Add a comment to document that kvm_ops_update() is effectively the point
of no return, e.g. it sets the kvm_x86_ops.hardware_enable canary and so
needs to be unwound.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move kvm_arch_init()'s call to kvm_timer_init() down a few lines below
the XCR0 configuration code. A future patch will move hardware setup
into kvm_arch_init() and slot in vendor hardware setup before the call
to kvm_timer_init() so that timer initialization (among other stuff)
doesn't need to be unwound if vendor setup fails. XCR0 setup on the
other hand needs to happen before vendor hardware setup.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86:
* Change tdp_mmu to a read-only parameter
* Separate TDP and shadow MMU page fault paths
* Enable Hyper-V invariant TSC control
selftests:
* Use TAP interface for kvm_binary_stats_test and tsc_msrs_test
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Normally, genuine Hyper-V doesn't expose architectural invariant TSC
(CPUID.80000007H:EDX[8]) to its guests by default. A special PV MSR
(HV_X64_MSR_TSC_INVARIANT_CONTROL, 0x40000118) and corresponding CPUID
feature bit (CPUID.0x40000003.EAX[15]) were introduced. When bit 0 of the
PV MSR is set, invariant TSC bit starts to show up in CPUID. When the
feature is exposed to Hyper-V guests, reenlightenment becomes unneeded.
Add the feature to KVM. Keep CPUID output intact when the feature
wasn't exposed to L1 and implement the required logic for hiding
invariant TSC when the feature was exposed and invariant TSC control
MSR wasn't written to. Copy genuine Hyper-V behavior and forbid to
disable the feature once it was enabled.
For the reference, for linux guests, support for the feature was added
in commit dce7cd6275 ("x86/hyperv: Allow guests to enable InvariantTSC").
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013095849.705943-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86:
* several fixes to nested VMX execution controls
* fixes and clarification to the documentation for Xen emulation
* do not unnecessarily release a pmu event with zero period
* MMU fixes
* fix Coverity warning in kvm_hv_flush_tlb()
selftests:
* fixes for the ucall mechanism in selftests
* other fixes mostly related to compilation with clang
Normally, genuine Hyper-V doesn't expose architectural invariant TSC
(CPUID.80000007H:EDX[8]) to its guests by default. A special PV MSR
(HV_X64_MSR_TSC_INVARIANT_CONTROL, 0x40000118) and corresponding CPUID
feature bit (CPUID.0x40000003.EAX[15]) were introduced. When bit 0 of the
PV MSR is set, invariant TSC bit starts to show up in CPUID. When the
feature is exposed to Hyper-V guests, reenlightenment becomes unneeded.
Add the feature to KVM. Keep CPUID output intact when the feature
wasn't exposed to L1 and implement the required logic for hiding
invariant TSC when the feature was exposed and invariant TSC control
MSR wasn't written to. Copy genuine Hyper-V behavior and forbid to
disable the feature once it was enabled.
For the reference, for linux guests, support for the feature was added
in commit dce7cd6275 ("x86/hyperv: Allow guests to enable InvariantTSC").
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013095849.705943-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a sanity check in kvm_handle_memory_failure() to assert that a valid
x86_exception structure is provided if the memory "failure" wants to
propagate a fault into the guest. If a memory failure happens during a
direct guest physical memory access, e.g. for nested VMX, KVM hardcodes
the failure to X86EMUL_IO_NEEDED and doesn't provide an exception pointer
(because the exception struct would just be filled with garbage).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221220153427.514032-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
* Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
* Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping option,
which multi-process VMMs such as crosvm rely on (see merge commit 382b5b87a9:
"Fix a number of issues with MTE, such as races on the tags being
initialised vs the PG_mte_tagged flag as well as the lack of support
for VM_SHARED when KVM is involved. Patches from Catalin Marinas and
Peter Collingbourne").
* Merge the pKVM shadow vcpu state tracking that allows the hypervisor
to have its own view of a vcpu, keeping that state private.
* Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
* Fix a handful of minor issues around 52bit VA/PA support (64kB pages
only) as a prefix of the oncoming support for 4kB and 16kB pages.
* Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
s390:
* Second batch of the lazy destroy patches
* First batch of KVM changes for kernel virtual != physical address support
* Removal of a unused function
x86:
* Allow compiling out SMM support
* Cleanup and documentation of SMM state save area format
* Preserve interrupt shadow in SMM state save area
* Respond to generic signals during slow page faults
* Fixes and optimizations for the non-executable huge page errata fix.
* Reprogram all performance counters on PMU filter change
* Cleanups to Hyper-V emulation and tests
* Process Hyper-V TLB flushes from a nested guest (i.e. from a L2 guest
running on top of a L1 Hyper-V hypervisor)
* Advertise several new Intel features
* x86 Xen-for-KVM:
** Allow the Xen runstate information to cross a page boundary
** Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured
** Add support for 32-bit guests in SCHEDOP_poll
* Notable x86 fixes and cleanups:
** One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
** Reinstate IBPB on emulated VM-Exit that was incorrectly dropped a few
years back when eliminating unnecessary barriers when switching between
vmcs01 and vmcs02.
** Clean up vmread_error_trampoline() to make it more obvious that params
must be passed on the stack, even for x86-64.
** Let userspace set all supported bits in MSR_IA32_FEAT_CTL irrespective
of the current guest CPUID.
** Fudge around a race with TSC refinement that results in KVM incorrectly
thinking a guest needs TSC scaling when running on a CPU with a
constant TSC, but no hardware-enumerated TSC frequency.
** Advertise (on AMD) that the SMM_CTL MSR is not supported
** Remove unnecessary exports
Generic:
* Support for responding to signals during page faults; introduces
new FOLL_INTERRUPTIBLE flag that was reviewed by mm folks
Selftests:
* Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
* Fix build errors that occur in certain setups (unsure exactly what is
unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
* Introduce actual atomics for clear/set_bit() in selftests
* Add support for pinning vCPUs in dirty_log_perf_test.
* Rename the so called "perf_util" framework to "memstress".
* Add a lightweight psuedo RNG for guest use, and use it to randomize
the access pattern and write vs. read percentage in the memstress tests.
* Add a common ucall implementation; code dedup and pre-work for running
SEV (and beyond) guests in selftests.
* Provide a common constructor and arch hook, which will eventually be
used by x86 to automatically select the right hypercall (AMD vs. Intel).
* A bunch of added/enabled/fixed selftests for ARM64, covering memslots,
breakpoints, stage-2 faults and access tracking.
* x86-specific selftest changes:
** Clean up x86's page table management.
** Clean up and enhance the "smaller maxphyaddr" test, and add a related
test to cover generic emulation failure.
** Clean up the nEPT support checks.
** Add X86_PROPERTY_* framework to retrieve multi-bit CPUID values.
** Fix an ordering issue in the AMX test introduced by recent conversions
to use kvm_cpu_has(), and harden the code to guard against similar bugs
in the future. Anything that tiggers caching of KVM's supported CPUID,
kvm_cpu_has() in this case, effectively hides opt-in XSAVE features if
the caching occurs before the test opts in via prctl().
Documentation:
* Remove deleted ioctls from documentation
* Clean up the docs for the x86 MSR filter.
* Various fixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmOaFrcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPemQgAq49excg2Cc+EsHnZw3vu/QWdA0Rt
KhL3OgKxuHNjCbD2O9n2t5di7eJOTQ7F7T0eDm3xPTr4FS8LQ2327/mQePU/H2CF
mWOpq9RBWLzFsSTeVA2Mz9TUTkYSnDHYuRsBvHyw/n9cL76BWVzjImldFtjYjjex
yAwl8c5itKH6bc7KO+5ydswbvBzODkeYKUSBNdbn6m0JGQST7XppNwIAJvpiHsii
Qgpk0e4Xx9q4PXG/r5DedI6BlufBsLhv0aE9SHPzyKH3JbbUFhJYI8ZD5OhBQuYW
MwxK2KlM5Jm5ud2NZDDlsMmmvd1lnYCFDyqNozaKEWC1Y5rq1AbMa51fXA==
=QAYX
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM64:
- Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
- Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
- Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping
option, which multi-process VMMs such as crosvm rely on (see merge
commit 382b5b87a9: "Fix a number of issues with MTE, such as
races on the tags being initialised vs the PG_mte_tagged flag as
well as the lack of support for VM_SHARED when KVM is involved.
Patches from Catalin Marinas and Peter Collingbourne").
- Merge the pKVM shadow vcpu state tracking that allows the
hypervisor to have its own view of a vcpu, keeping that state
private.
- Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
- Fix a handful of minor issues around 52bit VA/PA support (64kB
pages only) as a prefix of the oncoming support for 4kB and 16kB
pages.
- Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
s390:
- Second batch of the lazy destroy patches
- First batch of KVM changes for kernel virtual != physical address
support
- Removal of a unused function
x86:
- Allow compiling out SMM support
- Cleanup and documentation of SMM state save area format
- Preserve interrupt shadow in SMM state save area
- Respond to generic signals during slow page faults
- Fixes and optimizations for the non-executable huge page errata
fix.
- Reprogram all performance counters on PMU filter change
- Cleanups to Hyper-V emulation and tests
- Process Hyper-V TLB flushes from a nested guest (i.e. from a L2
guest running on top of a L1 Hyper-V hypervisor)
- Advertise several new Intel features
- x86 Xen-for-KVM:
- Allow the Xen runstate information to cross a page boundary
- Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured
- Add support for 32-bit guests in SCHEDOP_poll
- Notable x86 fixes and cleanups:
- One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
- Reinstate IBPB on emulated VM-Exit that was incorrectly dropped
a few years back when eliminating unnecessary barriers when
switching between vmcs01 and vmcs02.
- Clean up vmread_error_trampoline() to make it more obvious that
params must be passed on the stack, even for x86-64.
- Let userspace set all supported bits in MSR_IA32_FEAT_CTL
irrespective of the current guest CPUID.
- Fudge around a race with TSC refinement that results in KVM
incorrectly thinking a guest needs TSC scaling when running on a
CPU with a constant TSC, but no hardware-enumerated TSC
frequency.
- Advertise (on AMD) that the SMM_CTL MSR is not supported
- Remove unnecessary exports
Generic:
- Support for responding to signals during page faults; introduces
new FOLL_INTERRUPTIBLE flag that was reviewed by mm folks
Selftests:
- Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
- Fix build errors that occur in certain setups (unsure exactly what
is unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
- Introduce actual atomics for clear/set_bit() in selftests
- Add support for pinning vCPUs in dirty_log_perf_test.
- Rename the so called "perf_util" framework to "memstress".
- Add a lightweight psuedo RNG for guest use, and use it to randomize
the access pattern and write vs. read percentage in the memstress
tests.
- Add a common ucall implementation; code dedup and pre-work for
running SEV (and beyond) guests in selftests.
- Provide a common constructor and arch hook, which will eventually
be used by x86 to automatically select the right hypercall (AMD vs.
Intel).
- A bunch of added/enabled/fixed selftests for ARM64, covering
memslots, breakpoints, stage-2 faults and access tracking.
- x86-specific selftest changes:
- Clean up x86's page table management.
- Clean up and enhance the "smaller maxphyaddr" test, and add a
related test to cover generic emulation failure.
- Clean up the nEPT support checks.
- Add X86_PROPERTY_* framework to retrieve multi-bit CPUID values.
- Fix an ordering issue in the AMX test introduced by recent
conversions to use kvm_cpu_has(), and harden the code to guard
against similar bugs in the future. Anything that tiggers
caching of KVM's supported CPUID, kvm_cpu_has() in this case,
effectively hides opt-in XSAVE features if the caching occurs
before the test opts in via prctl().
Documentation:
- Remove deleted ioctls from documentation
- Clean up the docs for the x86 MSR filter.
- Various fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (361 commits)
KVM: x86: Add proper ReST tables for userspace MSR exits/flags
KVM: selftests: Allocate ucall pool from MEM_REGION_DATA
KVM: arm64: selftests: Align VA space allocator with TTBR0
KVM: arm64: Fix benign bug with incorrect use of VA_BITS
KVM: arm64: PMU: Fix period computation for 64bit counters with 32bit overflow
KVM: x86: Advertise that the SMM_CTL MSR is not supported
KVM: x86: remove unnecessary exports
KVM: selftests: Fix spelling mistake "probabalistic" -> "probabilistic"
tools: KVM: selftests: Convert clear/set_bit() to actual atomics
tools: Drop "atomic_" prefix from atomic test_and_set_bit()
tools: Drop conflicting non-atomic test_and_{clear,set}_bit() helpers
KVM: selftests: Use non-atomic clear/set bit helpers in KVM tests
perf tools: Use dedicated non-atomic clear/set bit helpers
tools: Take @bit as an "unsigned long" in {clear,set}_bit() helpers
KVM: arm64: selftests: Enable single-step without a "full" ucall()
KVM: x86: fix APICv/x2AVIC disabled when vm reboot by itself
KVM: Remove stale comment about KVM_REQ_UNHALT
KVM: Add missing arch for KVM_CREATE_DEVICE and KVM_{SET,GET}_DEVICE_ATTR
KVM: Reference to kvm_userspace_memory_region in doc and comments
KVM: Delete all references to removed KVM_SET_MEMORY_ALIAS ioctl
...
x86 Xen-for-KVM:
* Allow the Xen runstate information to cross a page boundary
* Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured
* add support for 32-bit guests in SCHEDOP_poll
x86 fixes:
* One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
* Reinstate IBPB on emulated VM-Exit that was incorrectly dropped a few
years back when eliminating unnecessary barriers when switching between
vmcs01 and vmcs02.
* Clean up the MSR filter docs.
* Clean up vmread_error_trampoline() to make it more obvious that params
must be passed on the stack, even for x86-64.
* Let userspace set all supported bits in MSR_IA32_FEAT_CTL irrespective
of the current guest CPUID.
* Fudge around a race with TSC refinement that results in KVM incorrectly
thinking a guest needs TSC scaling when running on a CPU with a
constant TSC, but no hardware-enumerated TSC frequency.
* Advertise (on AMD) that the SMM_CTL MSR is not supported
* Remove unnecessary exports
Selftests:
* Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
* Fix an ordering issue in the AMX test introduced by recent conversions
to use kvm_cpu_has(), and harden the code to guard against similar bugs
in the future. Anything that tiggers caching of KVM's supported CPUID,
kvm_cpu_has() in this case, effectively hides opt-in XSAVE features if
the caching occurs before the test opts in via prctl().
* Fix build errors that occur in certain setups (unsure exactly what is
unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
* Introduce actual atomics for clear/set_bit() in selftests
Documentation:
* Remove deleted ioctls from documentation
* Various fixes
- Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
- Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
- Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping
option, which multi-process VMMs such as crosvm rely on.
- Merge the pKVM shadow vcpu state tracking that allows the hypervisor
to have its own view of a vcpu, keeping that state private.
- Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
- Fix a handful of minor issues around 52bit VA/PA support (64kB pages
only) as a prefix of the oncoming support for 4kB and 16kB pages.
- Add/Enable/Fix a bunch of selftests covering memslots, breakpoints,
stage-2 faults and access tracking. You name it, we got it, we
probably broke it.
- Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
As a side effect, this tag also drags:
- The 'kvmarm-fixes-6.1-3' tag as a dependency to the dirty-ring
series
- A shared branch with the arm64 tree that repaints all the system
registers to match the ARM ARM's naming, and resulting in
interesting conflicts
-----BEGIN PGP SIGNATURE-----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=iIPT
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.2
- Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
- Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
- Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping
option, which multi-process VMMs such as crosvm rely on.
- Merge the pKVM shadow vcpu state tracking that allows the hypervisor
to have its own view of a vcpu, keeping that state private.
- Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
- Fix a handful of minor issues around 52bit VA/PA support (64kB pages
only) as a prefix of the oncoming support for 4kB and 16kB pages.
- Add/Enable/Fix a bunch of selftests covering memslots, breakpoints,
stage-2 faults and access tracking. You name it, we got it, we
probably broke it.
- Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
As a side effect, this tag also drags:
- The 'kvmarm-fixes-6.1-3' tag as a dependency to the dirty-ring
series
- A shared branch with the arm64 tree that repaints all the system
registers to match the ARM ARM's naming, and resulting in
interesting conflicts
* kvm-arm64/dirty-ring:
: .
: Add support for the "per-vcpu dirty-ring tracking with a bitmap
: and sprinkles on top", courtesy of Gavin Shan.
:
: This branch drags the kvmarm-fixes-6.1-3 tag which was already
: merged in 6.1-rc4 so that the branch is in a working state.
: .
KVM: Push dirty information unconditionally to backup bitmap
KVM: selftests: Automate choosing dirty ring size in dirty_log_test
KVM: selftests: Clear dirty ring states between two modes in dirty_log_test
KVM: selftests: Use host page size to map ring buffer in dirty_log_test
KVM: arm64: Enable ring-based dirty memory tracking
KVM: Support dirty ring in conjunction with bitmap
KVM: Move declaration of kvm_cpu_dirty_log_size() to kvm_dirty_ring.h
KVM: x86: Introduce KVM_REQ_DIRTY_RING_SOFT_FULL
Signed-off-by: Marc Zyngier <maz@kernel.org>
Pull Xen-for-KVM changes from David Woodhouse:
* add support for 32-bit guests in SCHEDOP_poll
* the rest of the gfn-to-pfn cache API cleanup
"I still haven't reinstated the last of those patches to make gpc->len
immutable."
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several symbols are not used by vendor modules but still exported.
Removing them ensures that new coupling between kvm.ko and kvm-*.ko
is noticed and reviewed.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Like Xu <like.xu.linux@gmail.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Like Xu <like.xu.linux@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't snapshot tsc_khz into per-cpu cpu_tsc_khz if the host TSC is
constant, in which case the actual TSC frequency will never change and thus
capturing TSC during initialization is unnecessary, KVM can simply use
tsc_khz. This value is snapshotted from
kvm_timer_init->kvmclock_cpu_online->tsc_khz_changed(NULL)
On CPUs with constant TSC, but not a hardware-specified TSC frequency,
snapshotting cpu_tsc_khz and using that to set a VM's target TSC frequency
can lead to VM to think its TSC frequency is not what it actually is if
refining the TSC completes after KVM snapshots tsc_khz. The actual
frequency never changes, only the kernel's calculation of what that
frequency is changes.
Ideally, KVM would not be able to race with TSC refinement, or would have
a hook into tsc_refine_calibration_work() to get an alert when refinement
is complete. Avoiding the race altogether isn't practical as refinement
takes a relative eternity; it's deliberately put on a work queue outside of
the normal boot sequence to avoid unnecessarily delaying boot.
Adding a hook is doable, but somewhat gross due to KVM's ability to be
built as a module. And if the TSC is constant, which is likely the case
for every VMX/SVM-capable CPU produced in the last decade, the race can be
hit if and only if userspace is able to create a VM before TSC refinement
completes; refinement is slow, but not that slow.
For now, punt on a proper fix, as not taking a snapshot can help some uses
cases and not taking a snapshot is arguably correct irrespective of the
race with refinement.
Signed-off-by: Anton Romanov <romanton@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220608183525.1143682-1-romanton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Treat any exception during instruction decode for EMULTYPE_SKIP as a
"full" emulation failure, i.e. signal failure instead of queuing the
exception. When decoding purely to skip an instruction, KVM and/or the
CPU has already done some amount of emulation that cannot be unwound,
e.g. on an EPT misconfig VM-Exit KVM has already processeed the emulated
MMIO. KVM already does this if a #UD is encountered, but not for other
exceptions, e.g. if a #PF is encountered during fetch.
In SVM's soft-injection use case, queueing the exception is particularly
problematic as queueing exceptions while injecting events can put KVM
into an infinite loop due to bailing from VM-Enter to service the newly
pending exception. E.g. multiple warnings to detect such behavior fire:
------------[ cut here ]------------
WARNING: CPU: 3 PID: 1017 at arch/x86/kvm/x86.c:9873 kvm_arch_vcpu_ioctl_run+0x1de5/0x20a0 [kvm]
Modules linked in: kvm_amd ccp kvm irqbypass
CPU: 3 PID: 1017 Comm: svm_nested_soft Not tainted 6.0.0-rc1+ #220
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kvm_arch_vcpu_ioctl_run+0x1de5/0x20a0 [kvm]
Call Trace:
kvm_vcpu_ioctl+0x223/0x6d0 [kvm]
__x64_sys_ioctl+0x85/0xc0
do_syscall_64+0x2b/0x50
entry_SYSCALL_64_after_hwframe+0x46/0xb0
---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
WARNING: CPU: 3 PID: 1017 at arch/x86/kvm/x86.c:9987 kvm_arch_vcpu_ioctl_run+0x12a3/0x20a0 [kvm]
Modules linked in: kvm_amd ccp kvm irqbypass
CPU: 3 PID: 1017 Comm: svm_nested_soft Tainted: G W 6.0.0-rc1+ #220
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kvm_arch_vcpu_ioctl_run+0x12a3/0x20a0 [kvm]
Call Trace:
kvm_vcpu_ioctl+0x223/0x6d0 [kvm]
__x64_sys_ioctl+0x85/0xc0
do_syscall_64+0x2b/0x50
entry_SYSCALL_64_after_hwframe+0x46/0xb0
---[ end trace 0000000000000000 ]---
Fixes: 6ea6e84309 ("KVM: x86: inject exceptions produced by x86_decode_insn")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220930233632.1725475-1-seanjc@google.com
Drop the @gpa param from the exported check()+refresh() helpers and limit
changing the cache's GPA to the activate path. All external users just
feed in gpc->gpa, i.e. this is a fancy nop.
Allowing users to change the GPA at check()+refresh() is dangerous as
those helpers explicitly allow concurrent calls, e.g. KVM could get into
a livelock scenario. It's also unclear as to what the expected behavior
should be if multiple tasks attempt to refresh with different GPAs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Make kvm_gpc_refresh() use kvm instance cached in gfn_to_pfn_cache.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
[sean: leave kvm_gpc_unmap() as-is]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Make kvm_gpc_check() use kvm instance cached in gfn_to_pfn_cache.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Move the assignment of immutable properties @kvm, @vcpu, and @usage to
the initializer. Make _activate() and _deactivate() use stored values.
Note, @len is also effectively immutable for most cases, but not in the
case of the Xen runstate cache, which may be split across two pages and
the length of the first segment will depend on its address.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
[sean: handle @len in a separate patch]
Signed-off-by: Sean Christopherson <seanjc@google.com>
[dwmw2: acknowledge that @len can actually change for some use cases]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
If a triple fault was fixed by kvm_x86_ops.nested_ops->triple_fault (by
turning it into a vmexit), there is no need to leave vcpu_enter_guest().
Any vcpu->requests will be caught later before the actual vmentry,
and in fact vcpu_enter_guest() was not initializing the "r" variable.
Depending on the compiler's whims, this could cause the
x86_64/triple_fault_event_test test to fail.
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Fixes: 92e7d5c83a ("KVM: x86: allow L1 to not intercept triple fault")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If a triple fault was fixed by kvm_x86_ops.nested_ops->triple_fault (by
turning it into a vmexit), there is no need to leave vcpu_enter_guest().
Any vcpu->requests will be caught later before the actual vmentry,
and in fact vcpu_enter_guest() was not initializing the "r" variable.
Depending on the compiler's whims, this could cause the
x86_64/triple_fault_event_test test to fail.
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Fixes: 92e7d5c83a ("KVM: x86: allow L1 to not intercept triple fault")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Formalize "gpc" as the acronym and use it in function names.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Closer inspection of the Xen code shows that we aren't supposed to be
using the XEN_RUNSTATE_UPDATE flag unconditionally. It should be
explicitly enabled by guests through the HYPERVISOR_vm_assist hypercall.
If we randomly set the top bit of ->state_entry_time for a guest that
hasn't asked for it and doesn't expect it, that could make the runtimes
fail to add up and confuse the guest. Without the flag it's perfectly
safe for a vCPU to read its own vcpu_runstate_info; just not for one
vCPU to read *another's*.
I briefly pondered adding a word for the whole set of VMASST_TYPE_*
flags but the only one we care about for HVM guests is this, so it
seemed a bit pointless.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20221127122210.248427-3-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fixes for Xen emulation. While nobody should be enabling it in
the kernel (the only public users of the feature are the selftests),
the bug effectively allows userspace to read arbitrary memory.
* Correctness fixes for nested hypervisors that do not intercept INIT
or SHUTDOWN on AMD; the subsequent CPU reset can cause a use-after-free
when it disables virtualization extensions. While downgrading the panic
to a WARN is quite easy, the full fix is a bit more laborious; there
are also tests. This is the bulk of the pull request.
* Fix race condition due to incorrect mmu_lock use around
make_mmu_pages_available().
Generic:
* Obey changes to the kvm.halt_poll_ns module parameter in VMs
not using KVM_CAP_HALT_POLL, restoring behavior from before
the introduction of the capability
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmODI84UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPVJwgAombWOBf549JiHGPtwejuQO20nTSj
Om9pzWQ9dR182P+ju/FdqSPXt/Lc8i+z5zSXDrV3HQ6/a3zIItA+bOAUiMFvHNAQ
w/7pEb1MzVOsEg2SXGOjZvW3WouB4Z4R0PosInYjrFrRGRAaw5iaTOZHGezE44t2
WBWk1PpdMap7J/8sjNT1ble72ig9JdSW4qeJUQ1GWxHCigI5sESCQVqF446KM0jF
gTYPGX5TqpbWiIejF0yNew9yNKMi/yO4Pz8I5j3vtopeHx24DCIqUAGaEg6ykErX
vnzYbVP7NaFrqtje49PsK6i1cu2u7uFPArj0dxo3DviQVZVHV1q6tNmI4A==
=Qgei
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"x86:
- Fixes for Xen emulation. While nobody should be enabling it in the
kernel (the only public users of the feature are the selftests),
the bug effectively allows userspace to read arbitrary memory.
- Correctness fixes for nested hypervisors that do not intercept INIT
or SHUTDOWN on AMD; the subsequent CPU reset can cause a
use-after-free when it disables virtualization extensions. While
downgrading the panic to a WARN is quite easy, the full fix is a
bit more laborious; there are also tests. This is the bulk of the
pull request.
- Fix race condition due to incorrect mmu_lock use around
make_mmu_pages_available().
Generic:
- Obey changes to the kvm.halt_poll_ns module parameter in VMs not
using KVM_CAP_HALT_POLL, restoring behavior from before the
introduction of the capability"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Update gfn_to_pfn_cache khva when it moves within the same page
KVM: x86/xen: Only do in-kernel acceleration of hypercalls for guest CPL0
KVM: x86/xen: Validate port number in SCHEDOP_poll
KVM: x86/mmu: Fix race condition in direct_page_fault
KVM: x86: remove exit_int_info warning in svm_handle_exit
KVM: selftests: add svm part to triple_fault_test
KVM: x86: allow L1 to not intercept triple fault
kvm: selftests: add svm nested shutdown test
KVM: selftests: move idt_entry to header
KVM: x86: forcibly leave nested mode on vCPU reset
KVM: x86: add kvm_leave_nested
KVM: x86: nSVM: harden svm_free_nested against freeing vmcb02 while still in use
KVM: x86: nSVM: leave nested mode on vCPU free
KVM: Obey kvm.halt_poll_ns in VMs not using KVM_CAP_HALT_POLL
KVM: Avoid re-reading kvm->max_halt_poll_ns during halt-polling
KVM: Cap vcpu->halt_poll_ns before halting rather than after
To allow flushing individual GVAs instead of always flushing the whole
VPID a per-vCPU structure to pass the requests is needed. Use standard
'kfifo' to queue two types of entries: individual GVA (GFN + up to 4095
following GFNs in the lower 12 bits) and 'flush all'.
The size of the fifo is arbitrarily set to '16'.
Note, kvm_hv_flush_tlb() only queues 'flush all' entries for now and
kvm_hv_vcpu_flush_tlb() doesn't actually read the fifo just resets the
queue before returning -EOPNOTSUPP (which triggers full TLB flush) so
the functional change is very small but the infrastructure is prepared
to handle individual GVA flush requests.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-10-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation to implementing fine-grained Hyper-V TLB flush and
L2 TLB flush, resurrect dedicated KVM_REQ_HV_TLB_FLUSH request bit. As
KVM_REQ_TLB_FLUSH_GUEST is a stronger operation, clear KVM_REQ_HV_TLB_FLUSH
request in kvm_vcpu_flush_tlb_guest().
The flush itself is temporary handled by kvm_vcpu_flush_tlb_guest().
No functional change intended.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-9-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clear KVM_REQ_TLB_FLUSH_CURRENT in kvm_vcpu_flush_tlb_all() instead of in
its sole caller that processes KVM_REQ_TLB_FLUSH. Regardless of why/when
kvm_vcpu_flush_tlb_all() is called, flushing "all" TLB entries also
flushes "current" TLB entries.
Ideally, there will never be another caller of kvm_vcpu_flush_tlb_all(),
and moving the handling "requires" extra work to document the ordering
requirement, but future Hyper-V paravirt TLB flushing support will add
similar logic for flush "guest" (Hyper-V can flush a subset of "guest"
entries). And in the Hyper-V case, KVM needs to do more than just clear
the request, the queue of GPAs to flush also needs to purged, and doing
all only in the request path is undesirable as kvm_vcpu_flush_tlb_guest()
does have multiple callers (though it's unlikely KVM's paravirt TLB flush
will coincide with Hyper-V's paravirt TLB flush).
Move the logic even though it adds extra "work" so that KVM will be
consistent with how flush requests are processed when the Hyper-V support
lands.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-8-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To make terminology between Hyper-V-on-KVM and KVM-on-Hyper-V consistent,
rename 'enable_direct_tlbflush' to 'enable_l2_tlb_flush'. The change
eliminates the use of confusing 'direct' and adds the missing underscore.
No functional change.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes three issues in nested SVM:
1) in the shutdown_interception() vmexit handler we call kvm_vcpu_reset().
However, if running nested and L1 doesn't intercept shutdown, the function
resets vcpu->arch.hflags without properly leaving the nested state.
This leaves the vCPU in inconsistent state and later triggers a kernel
panic in SVM code. The same bug can likely be triggered by sending INIT
via local apic to a vCPU which runs a nested guest.
On VMX we are lucky that the issue can't happen because VMX always
intercepts triple faults, thus triple fault in L2 will always be
redirected to L1. Plus, handle_triple_fault() doesn't reset the vCPU.
INIT IPI can't happen on VMX either because INIT events are masked while
in VMX mode.
Secondarily, KVM doesn't honour SHUTDOWN intercept bit of L1 on SVM.
A normal hypervisor should always intercept SHUTDOWN, a unit test on
the other hand might want to not do so.
Finally, the guest can trigger a kernel non rate limited printk on SVM
from the guest, which is fixed as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is SVM correctness fix - although a sane L1 would intercept
SHUTDOWN event, it doesn't have to, so we have to honour this.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221103141351.50662-8-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While not obivous, kvm_vcpu_reset() leaves the nested mode by clearing
'vcpu->arch.hflags' but it does so without all the required housekeeping.
On SVM, it is possible to have a vCPU reset while in guest mode because
unlike VMX, on SVM, INIT's are not latched in SVM non root mode and in
addition to that L1 doesn't have to intercept triple fault, which should
also trigger L1's reset if happens in L2 while L1 didn't intercept it.
If one of the above conditions happen, KVM will continue to use vmcb02
while not having in the guest mode.
Later the IA32_EFER will be cleared which will lead to freeing of the
nested guest state which will (correctly) free the vmcb02, but since
KVM still uses it (incorrectly) this will lead to a use after free
and kernel crash.
This issue is assigned CVE-2022-3344
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221103141351.50662-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
add kvm_leave_nested which wraps a call to nested_ops->leave_nested
into a function.
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221103141351.50662-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
DE_CFG contains the LFENCE serializing bit, restore it on resume too.
This is relevant to older families due to the way how they do S3.
Unify and correct naming while at it.
Fixes: e4d0e84e49 ("x86/cpu/AMD: Make LFENCE a serializing instruction")
Reported-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Reported-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The VCPU isn't expected to be runnable when the dirty ring becomes soft
full, until the dirty pages are harvested and the dirty ring is reset
from userspace. So there is a check in each guest's entrace to see if
the dirty ring is soft full or not. The VCPU is stopped from running if
its dirty ring has been soft full. The similar check will be needed when
the feature is going to be supported on ARM64. As Marc Zyngier suggested,
a new event will avoid pointless overhead to check the size of the dirty
ring ('vcpu->kvm->dirty_ring_size') in each guest's entrance.
Add KVM_REQ_DIRTY_RING_SOFT_FULL. The event is raised when the dirty ring
becomes soft full in kvm_dirty_ring_push(). The event is only cleared in
the check, done in the newly added helper kvm_dirty_ring_check_request().
Since the VCPU is not runnable when the dirty ring becomes soft full, the
KVM_REQ_DIRTY_RING_SOFT_FULL event is always set to prevent the VCPU from
running until the dirty pages are harvested and the dirty ring is reset by
userspace.
kvm_dirty_ring_soft_full() becomes a private function with the newly added
helper kvm_dirty_ring_check_request(). The alignment for the various event
definitions in kvm_host.h is changed to tab character by the way. In order
to avoid using 'container_of()', the argument @ring is replaced by @vcpu
in kvm_dirty_ring_push().
Link: https://lore.kernel.org/kvmarm/87lerkwtm5.wl-maz@kernel.org
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-2-gshan@redhat.com
Add the mask KVM_MSR_FILTER_RANGE_VALID_MASK for the flags in the
struct kvm_msr_filter_range. This simplifies checks that validate
these flags, and makes it easier to introduce new flags in the future.
No functional change intended.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220921151525.904162-5-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the mask KVM_MSR_FILTER_VALID_MASK for the flag in the struct
kvm_msr_filter. This makes it easier to introduce new flags in the
future.
No functional change intended.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220921151525.904162-4-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the mask KVM_MSR_EXIT_REASON_VALID_MASK for the MSR exit reason
flags. This simplifies checks that validate these flags, and makes it
easier to introduce new flags in the future.
No functional change intended.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220921151525.904162-3-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The hidden processor flags HF_SMM_MASK and HF_SMM_INSIDE_NMI_MASK
are not needed if CONFIG_KVM_SMM is turned off. Remove the
definitions altogether and the code that uses them.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This ensures that all the relevant code is compiled out, in fact
the process_smi stub can be removed too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220929172016.319443-9-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vendor-specific code that deals with SMI injection and saving/restoring
SMM state is not needed if CONFIG_KVM_SMM is disabled, so remove the
four callbacks smi_allowed, enter_smm, leave_smm and enable_smi_window.
The users in svm/nested.c and x86.c also have to be compiled out; the
amount of #ifdef'ed code is small and it's not worth moving it to
smm.c.
enter_smm is now used only within #ifdef CONFIG_KVM_SMM, and the stub
can therefore be removed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220929172016.319443-7-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some users of KVM implement the UEFI variable store through a paravirtual device
that does not require the "SMM lockbox" component of edk2; allow them to
compile out system management mode, which is not a full implementation
especially in how it interacts with nested virtualization.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220929172016.319443-6-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that RSM is implemented in a single emulator callback, there is no
point in going through other callbacks for the sake of modifying
processor state. Just invoke KVM's own internal functions directly,
and remove the callbacks that were only used by em_rsm; the only
substantial difference is in the handling of the segment registers
and descriptor cache, which have to be parsed into a struct kvm_segment
instead of a struct desc_struct.
This also fixes a bug where emulator_set_segment was shifting the
limit left by 12 if the G bit is set, but the limit had not been
shifted right upon entry to SMM.
The emulator context is still used to restore EIP and the general
purpose registers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220929172016.319443-5-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some users of KVM implement the UEFI variable store through a paravirtual
device that does not require the "SMM lockbox" component of edk2, and
would like to compile out system management mode. In preparation for
that, move the SMM exit code out of emulate.c and into a new file.
The code is still written as a series of invocations of the emulator
callbacks, but the two exiting_smm and leave_smm callbacks are merged
into one, and all the code from em_rsm is now part of the callback.
This removes all knowledge of the format of the SMM save state area
from the emulator. Further patches will clean up the code and
invoke KVM's own functions to access control registers, descriptor
caches, etc.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220929172016.319443-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some users of KVM implement the UEFI variable store through a paravirtual
device that does not require the "SMM lockbox" component of edk2, and
would like to compile out system management mode. In preparation for
that, move the SMM entry code out of x86.c and into a new file.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220929172016.319443-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Create a new header and source with code related to system management
mode emulation. Entry and exit will move there too; for now,
opportunistically rename put_smstate to PUT_SMSTATE while moving
it to smm.h, and adjust the SMM state saving code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220929172016.319443-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no caller. Remove it.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220913090537.25195-1-linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use kvm_caps.supported_perf_cap directly instead of bouncing through
kvm_get_msr_feature() when checking the incoming value for writes to
PERF_CAPABILITIES.
Note, kvm_get_msr_feature() is guaranteed to succeed when getting
PERF_CAPABILITIES, i.e. dropping that check is a nop.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221006000314.73240-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle PERF_CAPABILITIES directly in kvm_get_msr_feature() now that the
supported value is available in kvm_caps.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221006000314.73240-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Initialize vcpu->arch.perf_capabilities in x86's kvm_arch_vcpu_create()
instead of deferring initialization to vendor code. For better or worse,
common x86 handles reads and writes to the MSR, and so common x86 should
also handle initializing the MSR.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221006000314.73240-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The AMD PerfMonV2 specification allows for a maximum of 16 GP counters,
but currently only 6 pairs of MSRs are accepted by KVM.
While AMD64_NUM_COUNTERS_CORE is already equal to 6, increasing without
adjusting msrs_to_save_all[] could result in out-of-bounds accesses.
Therefore introduce a macro (named KVM_AMD_PMC_MAX_GENERIC) to
refer to the number of counters supported by KVM.
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220919091008.60695-3-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Intel Architectural IA32_PMCx MSRs addresses range allows for a
maximum of 8 GP counters, and KVM cannot address any more. Introduce a
local macro (named KVM_INTEL_PMC_MAX_GENERIC) and use it consistently to
refer to the number of counters supported by KVM, thus avoiding possible
out-of-bound accesses.
Suggested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220919091008.60695-2-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The SDM lists an architectural MSR IA32_CORE_CAPABILITIES (0xCF)
that limits the theoretical maximum value of the Intel GP PMC MSRs
allocated at 0xC1 to 14; likewise the Intel April 2022 SDM adds
IA32_OVERCLOCKING_STATUS at 0x195 which limits the number of event
selection MSRs to 15 (0x186-0x194).
Limiting the maximum number of counters to 14 or 18 based on the currently
allocated MSRs is clearly fragile, and it seems likely that Intel will
even place PMCs 8-15 at a completely different range of MSR indices.
So stop at the maximum number of GP PMCs supported today on Intel
processors.
There are some machines, like Intel P4 with non Architectural PMU, that
may indeed have 18 counters, but those counters are in a completely
different MSR address range and are not supported by KVM.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Fixes: cf05a67b68 ("KVM: x86: omit "impossible" pmu MSRs from MSR list")
Suggested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220919091008.60695-1-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_zap_gfn_range() must be called in an SRCU read-critical section, but
there is no SRCU annotation in __kvm_set_or_clear_apicv_inhibit(). This
can lead to the following warning via
kvm_arch_vcpu_ioctl_set_guest_debug() if a Shadow MMU is in use (TDP
MMU disabled or nesting):
[ 1416.659809] =============================
[ 1416.659810] WARNING: suspicious RCU usage
[ 1416.659839] 6.1.0-dbg-DEV #1 Tainted: G S I
[ 1416.659853] -----------------------------
[ 1416.659854] include/linux/kvm_host.h:954 suspicious rcu_dereference_check() usage!
[ 1416.659856]
...
[ 1416.659904] dump_stack_lvl+0x84/0xaa
[ 1416.659910] dump_stack+0x10/0x15
[ 1416.659913] lockdep_rcu_suspicious+0x11e/0x130
[ 1416.659919] kvm_zap_gfn_range+0x226/0x5e0
[ 1416.659926] ? kvm_make_all_cpus_request_except+0x18b/0x1e0
[ 1416.659935] __kvm_set_or_clear_apicv_inhibit+0xcc/0x100
[ 1416.659940] kvm_arch_vcpu_ioctl_set_guest_debug+0x350/0x390
[ 1416.659946] kvm_vcpu_ioctl+0x2fc/0x620
[ 1416.659955] __se_sys_ioctl+0x77/0xc0
[ 1416.659962] __x64_sys_ioctl+0x1d/0x20
[ 1416.659965] do_syscall_64+0x3d/0x80
[ 1416.659969] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Always take the KVM SRCU read lock in __kvm_set_or_clear_apicv_inhibit()
to protect the GFN to memslot translation. The SRCU read lock is not
technically required when no Shadow MMUs are in use, since the TDP MMU
walks the paging structures from the roots and does not need to look up
GFN translations in the memslots, but make the SRCU locking
unconditional for simplicty.
In most cases, the SRCU locking is taken care of in the vCPU run loop,
but when called through other ioctls (such as KVM_SET_GUEST_DEBUG)
there is no srcu_read_lock.
Tested: ran tools/testing/selftests/kvm/x86_64/debug_regs on a DBG
build. This patch causes the suspicious RCU warning to disappear.
Note that the warning is hit in __kvm_zap_rmaps(), so
kvm_memslots_have_rmaps() must return true in order for this to
repro (i.e. the TDP MMU must be off or nesting in use.)
Reported-by: Greg Thelen <gthelen@google.com>
Fixes: 36222b117e ("KVM: x86: don't disable APICv memslot when inhibited")
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20221102205359.1260980-1-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the gfn_to_pfn_cache lock initialization to another helper and
call the new helper during VM/vCPU creation. There are race
conditions possible due to kvm_gfn_to_pfn_cache_init()'s
ability to re-initialize the cache's locks.
For example: a race between ioctl(KVM_XEN_HVM_EVTCHN_SEND) and
kvm_gfn_to_pfn_cache_init() leads to a corrupted shinfo gpc lock.
(thread 1) | (thread 2)
|
kvm_xen_set_evtchn_fast |
read_lock_irqsave(&gpc->lock, ...) |
| kvm_gfn_to_pfn_cache_init
| rwlock_init(&gpc->lock)
read_unlock_irqrestore(&gpc->lock, ...) |
Rename "cache_init" and "cache_destroy" to activate+deactivate to
avoid implying that the cache really is destroyed/freed.
Note, there more races in the newly named kvm_gpc_activate() that will
be addressed separately.
Fixes: 982ed0de47 ("KVM: Reinstate gfn_to_pfn_cache with invalidation support")
Cc: stable@vger.kernel.org
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
[sean: call out that this is a bug fix]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013211234.1318131-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Exempt pending triple faults, a.k.a. KVM_REQ_TRIPLE_FAULT, when asserting
that KVM didn't attempt to queue a new exception during event injection.
KVM needs to emulate the injection itself when emulating Real Mode due to
lack of unrestricted guest support (VMX) and will queue a triple fault if
that emulation fails.
Ideally the assertion would more precisely filter out the emulated Real
Mode triple fault case, but rmode.vm86_active is buried in vcpu_vmx and
can't be queried without a new kvm_x86_ops. And unlike "regular"
exceptions, triple fault cannot put the vCPU into an infinite loop; the
triple fault will force either an exit to userspace or a nested VM-Exit,
and triple fault after nested VM-Exit will force an exit to userspace.
I.e. there is no functional issue, so just suppress the warning for
triple faults.
Opportunistically convert the warning to a one-time thing, when it
fires, it fires _a lot_, and is usually user triggerable, i.e. can be
used to spam the kernel log.
Fixes: 7055fb1131 ("KVM: x86: Treat pending TRIPLE_FAULT requests as pending exceptions")
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/r/202209301338.aca913c3-yujie.liu@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220930230008.1636044-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The KVM_X86_SET_MSR_FILTER ioctls contains a pointer in the passed in
struct which means it has a different struct size depending on whether
it gets called from 32bit or 64bit code.
This patch introduces compat code that converts from the 32bit struct to
its 64bit counterpart which then gets used going forward internally.
With this applied, 32bit QEMU can successfully set MSR bitmaps when
running on 64bit kernels.
Reported-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Fixes: 1a155254ff ("KVM: x86: Introduce MSR filtering")
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-4-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the next patch we want to introduce a second caller to
set_msr_filter() which constructs its own filter list on the stack.
Refactor the original function so it takes it as argument instead of
reading it through copy_from_user().
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-3-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
am sending out early due to me travelling next week. There is a
lone mm patch for which Andrew gave an informal ack at
https://lore.kernel.org/linux-mm/20220817102500.440c6d0a3fce296fdf91bea6@linux-foundation.org.
I will send the bulk of ARM work, as well as other
architectures, at the end of next week.
ARM:
* Account stage2 page table allocations in memory stats.
x86:
* Account EPT/NPT arm64 page table allocations in memory stats.
* Tracepoint cleanups/fixes for nested VM-Enter and emulated MSR accesses.
* Drop eVMCS controls filtering for KVM on Hyper-V, all known versions of
Hyper-V now support eVMCS fields associated with features that are
enumerated to the guest.
* Use KVM's sanitized VMCS config as the basis for the values of nested VMX
capabilities MSRs.
* A myriad event/exception fixes and cleanups. Most notably, pending
exceptions morph into VM-Exits earlier, as soon as the exception is
queued, instead of waiting until the next vmentry. This fixed
a longstanding issue where the exceptions would incorrecly become
double-faults instead of triggering a vmexit; the common case of
page-fault vmexits had a special workaround, but now it's fixed
for good.
* A handful of fixes for memory leaks in error paths.
* Cleanups for VMREAD trampoline and VMX's VM-Exit assembly flow.
* Never write to memory from non-sleepable kvm_vcpu_check_block()
* Selftests refinements and cleanups.
* Misc typo cleanups.
Generic:
* remove KVM_REQ_UNHALT
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmM2zwcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNpbwf+MlVeOlzE5SBdrJ0TEnLmKUel1lSz
QnZzP5+D65oD0zhCilUZHcg6G4mzZ5SdVVOvrGJvA0eXh25ruLNMF6jbaABkMLk/
FfI1ybN7A82hwJn/aXMI/sUurWv4Jteaad20JC2DytBCnsW8jUqc49gtXHS2QWy4
3uMsFdpdTAg4zdJKgEUfXBmQviweVpjjl3ziRyZZ7yaeo1oP7XZ8LaE1nR2l5m0J
mfjzneNm5QAnueypOh5KhSwIvqf6WHIVm/rIHDJ1HIFbgfOU0dT27nhb1tmPwAcE
+cJnnMUHjZqtCXteHkAxMClyRq0zsEoKk0OGvSOOMoq3Q0DavSXUNANOig==
=/hqX
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"The first batch of KVM patches, mostly covering x86.
ARM:
- Account stage2 page table allocations in memory stats
x86:
- Account EPT/NPT arm64 page table allocations in memory stats
- Tracepoint cleanups/fixes for nested VM-Enter and emulated MSR
accesses
- Drop eVMCS controls filtering for KVM on Hyper-V, all known
versions of Hyper-V now support eVMCS fields associated with
features that are enumerated to the guest
- Use KVM's sanitized VMCS config as the basis for the values of
nested VMX capabilities MSRs
- A myriad event/exception fixes and cleanups. Most notably, pending
exceptions morph into VM-Exits earlier, as soon as the exception is
queued, instead of waiting until the next vmentry. This fixed a
longstanding issue where the exceptions would incorrecly become
double-faults instead of triggering a vmexit; the common case of
page-fault vmexits had a special workaround, but now it's fixed for
good
- A handful of fixes for memory leaks in error paths
- Cleanups for VMREAD trampoline and VMX's VM-Exit assembly flow
- Never write to memory from non-sleepable kvm_vcpu_check_block()
- Selftests refinements and cleanups
- Misc typo cleanups
Generic:
- remove KVM_REQ_UNHALT"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (94 commits)
KVM: remove KVM_REQ_UNHALT
KVM: mips, x86: do not rely on KVM_REQ_UNHALT
KVM: x86: never write to memory from kvm_vcpu_check_block()
KVM: x86: Don't snapshot pending INIT/SIPI prior to checking nested events
KVM: nVMX: Make event request on VMXOFF iff INIT/SIPI is pending
KVM: nVMX: Make an event request if INIT or SIPI is pending on VM-Enter
KVM: SVM: Make an event request if INIT or SIPI is pending when GIF is set
KVM: x86: lapic does not have to process INIT if it is blocked
KVM: x86: Rename kvm_apic_has_events() to make it INIT/SIPI specific
KVM: x86: Rename and expose helper to detect if INIT/SIPI are allowed
KVM: nVMX: Make an event request when pending an MTF nested VM-Exit
KVM: x86: make vendor code check for all nested events
mailmap: Update Oliver's email address
KVM: x86: Allow force_emulation_prefix to be written without a reload
KVM: selftests: Add an x86-only test to verify nested exception queueing
KVM: selftests: Use uapi header to get VMX and SVM exit reasons/codes
KVM: x86: Rename inject_pending_events() to kvm_check_and_inject_events()
KVM: VMX: Update MTF and ICEBP comments to document KVM's subtle behavior
KVM: x86: Treat pending TRIPLE_FAULT requests as pending exceptions
KVM: x86: Morph pending exceptions to pending VM-Exits at queue time
...
KVM_REQ_UNHALT is now unnecessary because it is replaced by the return
value of kvm_vcpu_block/kvm_vcpu_halt. Remove it.
No functional change intended.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20220921003201.1441511-13-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_REQ_UNHALT is a weird request that simply reports the value of
kvm_arch_vcpu_runnable() on exit from kvm_vcpu_halt(). Only
MIPS and x86 are looking at it, the others just clear it. Check
the state of the vCPU directly so that the request is handled
as a nop on all architectures.
No functional change intended, except for corner cases where an
event arrive immediately after a signal become pending or after
another similar host-side event.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220921003201.1441511-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_vcpu_check_block() is called while not in TASK_RUNNING, and therefore
it cannot sleep. Writing to guest memory is therefore forbidden, but it
can happen on AMD processors if kvm_check_nested_events() causes a vmexit.
Fortunately, all events that are caught by kvm_check_nested_events() are
also recognized by kvm_vcpu_has_events() through vendor callbacks such as
kvm_x86_interrupt_allowed() or kvm_x86_ops.nested_ops->has_events(), so
remove the call and postpone the actual processing to vcpu_block().
Opportunistically honor the return of kvm_check_nested_events(). KVM
punted on the check in kvm_vcpu_running() because the only error path is
if vmx_complete_nested_posted_interrupt() fails, in which case KVM exits
to userspace with "internal error" i.e. the VM is likely dead anyways so
it wasn't worth overloading the return of kvm_vcpu_running().
Add the check mostly so that KVM is consistent with itself; the return of
the call via kvm_apic_accept_events()=>kvm_check_nested_events() that
immediately follows _is_ checked.
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[sean: check and handle return of kvm_check_nested_events()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220921003201.1441511-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not return true from kvm_vcpu_has_events() if the vCPU isn' going to
immediately process a pending INIT/SIPI. INIT/SIPI shouldn't be treated
as wake events if they are blocked.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[sean: rebase onto refactored INIT/SIPI helpers, massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220921003201.1441511-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename kvm_apic_has_events() to kvm_apic_has_pending_init_or_sipi() so
that it's more obvious that "events" really just means "INIT or SIPI".
Opportunistically clean up a weirdly worded comment that referenced
kvm_apic_has_events() instead of kvm_apic_accept_events().
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220921003201.1441511-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename and invert kvm_vcpu_latch_init() to kvm_apic_init_sipi_allowed()
so as to match the behavior of {interrupt,nmi,smi}_allowed(), and expose
the helper so that it can be used by kvm_vcpu_has_events() to determine
whether or not an INIT or SIPI is pending _and_ can be taken immediately.
Opportunistically replaced usage of the "latch" terminology with "blocked"
and/or "allowed", again to align with KVM's terminology used for all other
event types.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220921003201.1441511-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Interrupts, NMIs etc. sent while in guest mode are already handled
properly by the *_interrupt_allowed callbacks, but other events can
cause a vCPU to be runnable that are specific to guest mode.
In the case of VMX there are two, the preemption timer and the
monitor trap. The VMX preemption timer is already special cased via
the hv_timer_pending callback, but the purpose of the callback can be
easily extended to MTF or in fact any other event that can occur only
in guest mode.
Rename the callback and add an MTF check; kvm_arch_vcpu_runnable()
now can return true if an MTF is pending, without relying on
kvm_vcpu_running()'s call to kvm_check_nested_events(). Until that call
is removed, however, the patch introduces no functional change.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220921003201.1441511-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow force_emulation_prefix to be written by privileged userspace
without reloading KVM. The param does not have any persistent affects
and is trivial to snapshot.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220830231614.3580124-28-seanjc@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename inject_pending_events() to kvm_check_and_inject_events() in order
to capture the fact that it handles more than just pending events, and to
(mostly) align with kvm_check_nested_events(), which omits the "inject"
for brevity.
Add a comment above kvm_check_and_inject_events() to provide a high-level
synopsis, and to document a virtualization hole (KVM erratum if you will)
that exists due to KVM not strictly tracking instruction boundaries with
respect to coincident instruction restarts and asynchronous events.
No functional change inteded.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220830231614.3580124-25-seanjc@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Treat pending TRIPLE_FAULTS as pending exceptions. A triple fault is an
exception for all intents and purposes, it's just not tracked as such
because there's no vector associated the exception. E.g. if userspace
were to set vcpu->request_interrupt_window while running L2 and L2 hit a
triple fault, a triple fault nested VM-Exit should be synthesized to L1
before exiting to userspace with KVM_EXIT_IRQ_WINDOW_OPEN.
Link: https://lore.kernel.org/all/YoVHAIGcFgJit1qp@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220830231614.3580124-23-seanjc@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Morph pending exceptions to pending VM-Exits (due to interception) when
the exception is queued instead of waiting until nested events are
checked at VM-Entry. This fixes a longstanding bug where KVM fails to
handle an exception that occurs during delivery of a previous exception,
KVM (L0) and L1 both want to intercept the exception (e.g. #PF for shadow
paging), and KVM determines that the exception is in the guest's domain,
i.e. queues the new exception for L2. Deferring the interception check
causes KVM to esclate various combinations of injected+pending exceptions
to double fault (#DF) without consulting L1's interception desires, and
ends up injecting a spurious #DF into L2.
KVM has fudged around the issue for #PF by special casing emulated #PF
injection for shadow paging, but the underlying issue is not unique to
shadow paging in L0, e.g. if KVM is intercepting #PF because the guest
has a smaller maxphyaddr and L1 (but not L0) is using shadow paging.
Other exceptions are affected as well, e.g. if KVM is intercepting #GP
for one of SVM's workaround or for the VMware backdoor emulation stuff.
The other cases have gone unnoticed because the #DF is spurious if and
only if L1 resolves the exception, e.g. KVM's goofs go unnoticed if L1
would have injected #DF anyways.
The hack-a-fix has also led to ugly code, e.g. bailing from the emulator
if #PF injection forced a nested VM-Exit and the emulator finds itself
back in L1. Allowing for direct-to-VM-Exit queueing also neatly solves
the async #PF in L2 mess; no need to set a magic flag and token, simply
queue a #PF nested VM-Exit.
Deal with event migration by flagging that a pending exception was queued
by userspace and check for interception at the next KVM_RUN, e.g. so that
KVM does the right thing regardless of the order in which userspace
restores nested state vs. event state.
When "getting" events from userspace, simply drop any pending excpetion
that is destined to be intercepted if there is also an injected exception
to be migrated. Ideally, KVM would migrate both events, but that would
require new ABI, and practically speaking losing the event is unlikely to
be noticed, let alone fatal. The injected exception is captured, RIP
still points at the original faulting instruction, etc... So either the
injection on the target will trigger the same intercepted exception, or
the source of the intercepted exception was transient and/or
non-deterministic, thus dropping it is ok-ish.
Fixes: a04aead144 ("KVM: nSVM: fix running nested guests when npt=0")
Fixes: feaf0c7dc4 ("KVM: nVMX: Do not generate #DF if #PF happens during exception delivery into L2")
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220830231614.3580124-22-seanjc@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Determine whether or not new events can be injected after checking nested
events. If a VM-Exit occurred during nested event handling, any previous
event that needed re-injection is gone from's KVM perspective; the event
is captured in the vmc*12 VM-Exit information, but doesn't exist in terms
of what needs to be done for entry to L1.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220830231614.3580124-19-seanjc@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Perform nested event checks before re-injecting exceptions/events into
L2. If a pending exception causes VM-Exit to L1, re-injecting events
into vmcs02 is premature and wasted effort. Take care to ensure events
that need to be re-injected are still re-injected if checking for nested
events "fails", i.e. if KVM needs to force an immediate entry+exit to
complete the to-be-re-injecteed event.
Keep the "can_inject" logic the same for now; it too can be pushed below
the nested checks, but is a slightly riskier change (see past bugs about
events not being properly purged on nested VM-Exit).
Add and/or modify comments to better document the various interactions.
Of note is the comment regarding "blocking" previously injected NMIs and
IRQs if an exception is pending. The old comment isn't wrong strictly
speaking, but it failed to capture the reason why the logic even exists.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220830231614.3580124-18-seanjc@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Queue #DF by recursing on kvm_multiple_exception() by way of
kvm_queue_exception_e() instead of open coding the behavior. This will
allow KVM to Just Work when a future commit moves exception interception
checks (for L2 => L1) into kvm_multiple_exception().
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220830231614.3580124-17-seanjc@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the definition of "struct kvm_queued_exception" out of kvm_vcpu_arch
in anticipation of adding a second instance in kvm_vcpu_arch to handle
exceptions that occur when vectoring an injected exception and are
morphed to VM-Exit instead of leading to #DF.
Opportunistically take advantage of the churn to rename "nr" to "vector".
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220830231614.3580124-15-seanjc@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename the kvm_x86_ops hook for exception injection to better reflect
reality, and to align with pretty much every other related function name
in KVM.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220830231614.3580124-14-seanjc@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a dedicated "exception type" for #DBs, as #DBs can be fault-like or
trap-like depending the sub-type of #DB, and effectively defer the
decision of what to do with the #DB to the caller.
For the emulator's two calls to exception_type(), treat the #DB as
fault-like, as the emulator handles only code breakpoint and general
detect #DBs, both of which are fault-like.
For event injection, which uses exception_type() to determine whether to
set EFLAGS.RF=1 on the stack, keep the current behavior of not setting
RF=1 for #DBs. Intel and AMD explicitly state RF isn't set on code #DBs,
so exempting by failing the "== EXCPT_FAULT" check is correct. The only
other fault-like #DB is General Detect, and despite Intel and AMD both
strongly implying (through omission) that General Detect #DBs should set
RF=1, hardware (multiple generations of both Intel and AMD), in fact does
not. Through insider knowledge, extreme foresight, sheer dumb luck, or
some combination thereof, KVM correctly handled RF for General Detect #DBs.
Fixes: 38827dbd3f ("KVM: x86: Do not update EFLAGS on faulting emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220830231614.3580124-9-seanjc@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suppress code breakpoints if MOV/POP SS blocking is active and the guest
CPU is Intel, i.e. if the guest thinks it's running on an Intel CPU.
Intel CPUs inhibit code #DBs when MOV/POP SS blocking is active, whereas
AMD (and its descendents) do not.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220830231614.3580124-6-seanjc@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
