Backmerging drm-next to sync with msm tree. Resolves a conflict
between aperture-helper changes and msm's use of those interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Merge DPU changes, resolving conflicts between branches. Full changelog
will be present in the final merge commit.
DPU:
- DSPP sub-block flush on sc7280
- support AR30 in addition to XR30 format
- Allow using REC_0 and REC_1 to handle wide (4k) RGB planes
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Move code from ad-hoc fbdev callbacks into DRM client functions
and remove the old callbacks. The functions instruct the client
to poll for changed output or restore the display. The DRM core
calls both, the old callbacks and the new client helpers, from
the same places. The new functions perform the same operation as
before, so there's no change in functionality.
Replace all code that initializes or releases fbdev emulation
throughout the driver. Instead initialize the fbdev client by a
single call to msm_fbdev_setup() after msm has registered its
DRM device. As in most drivers, msm's fbdev emulation now acts
like a regular DRM client.
The fbdev client setup consists of the initial preparation and the
hot-plugging of the display. The latter creates the fbdev device
and sets up the fbdev framebuffer. The setup performs display
hot-plugging once. If no display can be detected, DRM probe helpers
re-run the detection on each hotplug event.
A call to drm_dev_unregister() releases the client automatically.
No further action is required within msm. If the fbdev framebuffer
has been fully set up, struct fb_ops.fb_destroy implements the
release. For partially initialized emulation, the fbdev client
reverts the initial setup.
v2:
* handle fbdev module parameter correctly (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # RB5
Patchwork: https://patchwork.freedesktop.org/patch/530560/
Link: https://lore.kernel.org/r/20230403124538.8497-9-tzimmermann@suse.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Define the module's parameter 'fbdev' in fbdev code. No other code
uses it. No functional changes, but simplifies the later conversion
to struct drm_client.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/530555/
Link: https://lore.kernel.org/r/20230403124538.8497-7-tzimmermann@suse.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The DRM device stores a pointer to the fbdev helper. Remove struct
msm_drm_private.fbdev, which contains the same value. No functional
changes.
v2:
* test for fb_helper->fb in debugfs code
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/530559/
Link: https://lore.kernel.org/r/20230403124538.8497-6-tzimmermann@suse.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Move aperture management out of the fbdev code. It is unrelated
and needs to run even if fbdev support has been disabled. Call
the helper at the top of msm_drm_init() to take over hardware
from other drivers.
v2:
* bind all subdevices before acquiring device (Dmitri)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/530553/
Link: https://lore.kernel.org/r/20230403124538.8497-3-tzimmermann@suse.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Make sure to destroy the workqueue also in case of early errors during
bind (e.g. a subcomponent failing to bind).
Since commit c3b790ea07 ("drm: Manage drm_mode_config_init with
drmm_") the mode config will be freed when the drm device is released
also when using the legacy interface, but add an explicit cleanup for
consistency and to facilitate backporting.
Fixes: 060530f1ea ("drm/msm: use componentised device support")
Cc: stable@vger.kernel.org # 3.15
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525093/
Link: https://lore.kernel.org/r/20230306100722.28485-9-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In case of early initialisation errors and on platforms that do not use
the DPU controller, the deinitilisation code can be called with the kms
pointer set to NULL.
Fixes: f026e431cf ("drm/msm: Convert to Linux IRQ interfaces")
Cc: stable@vger.kernel.org # 5.14
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525104/
Link: https://lore.kernel.org/r/20230306100722.28485-5-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In case of early initialisation errors and on platforms that do not use
the DPU controller, the deinitilisation code can be called with the kms
pointer set to NULL.
Fixes: 98659487b8 ("drm/msm: add support to take dpu snapshot")
Cc: stable@vger.kernel.org # 5.14
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525099/
Link: https://lore.kernel.org/r/20230306100722.28485-4-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This reverts commit 8636500300.
A recent commit tried to address a drm device leak in the early
msm_drm_uninit() error paths but ended up making things worse.
Specifically, it moved the drm device reference put in msm_drm_uninit()
to msm_drm_init() which means that the drm would now be leaked on normal
unbind.
For reasons that were never spelled out, it also added kms NULL pointer
checks to a couple of helper functions that had nothing to do with the
paths modified by the patch.
Instead of trying to salvage this incrementally, let's revert the bad
commit so that clean and backportable fixes can be added in its place.
Fixes: 8636500300 ("drm/msm: Fix failure paths in msm_drm_init()")
Cc: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525092/
Link: https://lore.kernel.org/r/20230306100722.28485-3-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This reverts commit 643b7d0869.
A recent patch that tried to fix up the msm_drm_init() paths with
respect to the workqueue but only ended up making things worse:
First, the newly added calls to msm_drm_uninit() on early errors would
trigger NULL-pointer dereferences, for example, as the kms pointer would
not have been initialised. (Note that these paths were also modified by
a second broken error handling patch which in effect cancelled out this
part when merged.)
Second, the newly added allocation sanity check would still leak the
previously allocated drm device.
Instead of trying to salvage what was badly broken (and clearly not
tested), let's revert the bad commit so that clean and backportable
fixes can be added in its place.
Fixes: 643b7d0869 ("drm/msm: Add missing check and destroy for alloc_ordered_workqueue")
Cc: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525107/
Link: https://lore.kernel.org/r/20230306100722.28485-2-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Merge display-related changes targeting Qualcomm DRM MSM driver.
Notable changes:
DPU, DSI, MDSS:
- Support for SM8350, SM8450 SM8550 and SC8280XP platform
Core:
- Added bindings for SM8150 (driver support already present)
DPU:
- Partial support for DSC on SM8150 and SM8250
- Fixed color transformation matrix being lost on suspend/resume
DP:
- Support for DP on SDM845 and SC8280XP platforms
- HPD fixes
- Support for limiting DP link rate via DT property, this enables
support for HBR3 rates.
DSI:
- Validate display modes according to the DSI OPP table
- DSI PHY support for the SM6375 platform
- Fixed byte intf clock selection for 14nm PHYs
MDP5:
- Schema conversion to YAML
Misc fixes as usual
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add check for the return value of alloc_ordered_workqueue as it may return
NULL pointer.
Moreover, use the destroy_workqueue in the later fails in order to avoid
memory leak.
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/517419/
Link: https://lore.kernel.org/r/20230109022038.2163-1-jiasheng@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
If worker creation fails, nullify the event_thread->worker, so that
msm_drm_uninit() doesn't try accessing invalid memory location. While we
are at it, remove duplicate assignment to the ret variable.
Fixes: 1041dee217 ("drm/msm: use kthread_create_worker instead of kthread_run")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/490106/
Link: https://lore.kernel.org/r/20220617233328.1143665-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
If the hangcheck timer expires, check if the fw's position in the
cmdstream has advanced (changed) since last timer expiration, and
allow it up to three additional "extensions" to it's alotted time.
The intention is to continue to catch "shader stuck in a loop" type
hangs quickly, but allow more time for things that are actually
making forward progress.
Because we need to sample the CP state twice to detect if there has
not been progress, this also cuts the the timer's duration in half.
v2: Fix typo (REG_A6XX_CP_CSQ_IB2_STAT), add comment
v3: Only halve hangcheck timer duration for generations which
support progress detection (hdanton); removed unused a5xx
progress (without knowing how to adjust for data buffered
in ROQ it is too likely to report a false negative)
v4: Comment updates to better describe the total hangcheck
duration when progress detection is applied
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Tested-by: Chia-I Wu <olvaffe@gmail.com> # dEQP-GLES2.functional.flush_finish.wait
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/511584/
Link: https://lore.kernel.org/r/20221114193049.1533391-3-robdclark@gmail.com
After the msm_iommu instance is created, the IOMMU domain is completely
handled inside the msm_iommu code. Move the iommu_domain_alloc() call
into the msm_iommu_new() to simplify callers code.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/509615/
Link: https://lore.kernel.org/r/20221102175449.452283-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The bridge counter was never reset when tearing down the DRM device so
that stale pointers to deallocated structures would be accessed on the
next tear down (e.g. after a second late bind deferral).
Given enough bridges and a few probe deferrals this could currently also
lead to data beyond the bridge array being corrupted.
Fixes: d28ea55626 ("drm/msm: properly add and remove internal bridges")
Fixes: a3376e3ec8 ("drm/msm: convert to drm_bridge")
Cc: stable@vger.kernel.org # 3.12
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/502665/
Link: https://lore.kernel.org/r/20220913085320.8577-2-johan+linaro@kernel.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
msm-next for v6.1
DPU:
- simplified VBIF configuration
- cleaned up CTL interfaces to accept indices rather than flush masks
DSI:
- removed unused msm_display_dsc_config struct
- switch regulator calls to new bulk API
- switched to use PANEL_BRIDGE for directly attached panels
DSI PHY:
- converted drivers to use parent_hws instead of parent_names
DP:
- cleaned up pixel_rate handling
HDMI PHY:
- turned hdmi-phy-8996 into OF clk provider
core:
- misc dt-bindings fixes
- choose eDP as primary display if it's available
- support getting interconnects from either the mdss or the mdp5/dpu
device nodes
gpu+gem:
- Shrinker + LRU re-work:
- adds a shared GEM LRU+shrinker helper and moves msm over to that
- reduces lock contention between retire and submit by avoiding the
need to acquire obj lock in retire path (and instead using resv
seeing obj's busyness in the shrinker
- fix reclaim vs submit issues
- GEM fault injection for triggering userspace error paths
- Map/unmap optimization
- Improved robustness for a6xx GPU recovery
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsrfrr9v1oR9S4oYfOs9jm=jbKQiwPBTrCRHrjYerJJFA@mail.gmail.com
Drivers' .remove and .shutdown callbacks are executed on different code
paths. The former is called when a device is removed from the bus, while
the latter is called at system shutdown time to quiesce the device.
This means that some overlap exists between the two, because both have to
take care of properly shutting down the hardware. But currently the logic
used in these two callbacks isn't consistent in msm drivers, which could
lead to kernel panic.
For example, on .remove the component is deleted and its .unbind callback
leads to the hardware being shutdown but only if the DRM device has been
marked as registered.
That check doesn't exist in the .shutdown logic and this can lead to the
driver calling drm_atomic_helper_shutdown() for a DRM device that hasn't
been properly initialized.
A situation like this can happen if drivers for expected sub-devices fail
to probe, since the .bind callback will never be executed. If that is the
case, drm_atomic_helper_shutdown() will attempt to take mutexes that are
only initialized if drm_mode_config_init() is called during a device bind.
This bug was attempted to be fixed in commit 623f279c77 ("drm/msm: fix
shutdown hook in case GPU components failed to bind"), but unfortunately
it still happens in some cases as the one mentioned above, i.e:
systemd-shutdown[1]: Powering off.
kvm: exiting hardware virtualization
platform wifi-firmware.0: Removing from iommu group 12
platform video-firmware.0: Removing from iommu group 10
------------[ cut here ]------------
WARNING: CPU: 6 PID: 1 at drivers/gpu/drm/drm_modeset_lock.c:317 drm_modeset_lock_all_ctx+0x3c4/0x3d0
...
Hardware name: Google CoachZ (rev3+) (DT)
pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drm_modeset_lock_all_ctx+0x3c4/0x3d0
lr : drm_modeset_lock_all_ctx+0x48/0x3d0
sp : ffff80000805bb80
x29: ffff80000805bb80 x28: ffff327c00128000 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000001 x24: ffffc95d820ec030
x23: ffff327c00bbd090 x22: ffffc95d8215eca0 x21: ffff327c039c5800
x20: ffff327c039c5988 x19: ffff80000805bbe8 x18: 0000000000000034
x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000
x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffff327c00128000 x1 : 0000000000000000 x0 : ffff327c039c59b0
Call trace:
drm_modeset_lock_all_ctx+0x3c4/0x3d0
drm_atomic_helper_shutdown+0x70/0x134
msm_drv_shutdown+0x30/0x40
platform_shutdown+0x28/0x40
device_shutdown+0x148/0x350
kernel_power_off+0x38/0x80
__do_sys_reboot+0x288/0x2c0
__arm64_sys_reboot+0x28/0x34
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x44/0xec
do_el0_svc+0x2c/0xc0
el0_svc+0x2c/0x84
el0t_64_sync_handler+0x11c/0x150
el0t_64_sync+0x18c/0x190
---[ end trace 0000000000000000 ]---
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000010eab1000
[0000000000000018] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
...
Hardware name: Google CoachZ (rev3+) (DT)
pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ww_mutex_lock+0x28/0x32c
lr : drm_modeset_lock_all_ctx+0x1b0/0x3d0
sp : ffff80000805bb50
x29: ffff80000805bb50 x28: ffff327c00128000 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000001 x24: 0000000000000018
x23: ffff80000805bc10 x22: ffff327c039c5ad8 x21: ffff327c039c5800
x20: ffff80000805bbe8 x19: 0000000000000018 x18: 0000000000000034
x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000
x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffff327c00128000 x1 : 0000000000000000 x0 : 0000000000000018
Call trace:
ww_mutex_lock+0x28/0x32c
drm_modeset_lock_all_ctx+0x1b0/0x3d0
drm_atomic_helper_shutdown+0x70/0x134
msm_drv_shutdown+0x30/0x40
platform_shutdown+0x28/0x40
device_shutdown+0x148/0x350
kernel_power_off+0x38/0x80
__do_sys_reboot+0x288/0x2c0
__arm64_sys_reboot+0x28/0x34
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x44/0xec
do_el0_svc+0x2c/0xc0
el0_svc+0x2c/0x84
el0t_64_sync_handler+0x11c/0x150
el0t_64_sync+0x18c/0x190
Code: aa0103f4 d503201f d2800001 aa0103e3 (c8e37c02)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Kernel Offset: 0x495d77c00000 from 0xffff800008000000
PHYS_OFFSET: 0xffffcd8500000000
CPU features: 0x800,00c2a015,19801c82
Memory Limit: none
---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
Fixes: 9d5cbf5fe4 ("drm/msm: add shutdown support for display platform_driver")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/497842/
Link: https://lore.kernel.org/r/20220816134612.916527-1-javierm@redhat.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Some userspace presumes that the first connected connector is the main
display, where it's supposed to display e.g. the login screen. For
laptops, this should be the main panel.
This patch call drm_helper_move_panel_connectors_to_head() after
drm_bridge_connector_init() to make sure eDP stay at head of
connected connector list. This fixes unexpected corruption happen
at eDP panel if eDP is not placed at head of connected connector
list.
Changes in v2:
-- move drm_helper_move_panel_connectors_to_head() to
dpu_kms_drm_obj_init()
Changes in v4:
-- move drm_helper_move_panel_connectors_to_head() to msm_drm_init()
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: ef7837ff09 ("drm/msm/dp: Add DP controllers for sc7280")
Patchwork: https://patchwork.freedesktop.org/patch/492581/
Link: https://lore.kernel.org/r/1657135928-31195-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This converts over to use the shared GEM LRU/shrinker helpers. Note
that it means we are no longer tracking purgeable or willneed buffers
that are active separately. But the most recently pinned buffers should
be at the tail of the various LRUs, and the shrinker is already prepared
to encounter objects which are still active.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/496131/
Link: https://lore.kernel.org/r/20220802155152.1727594-11-robdclark@gmail.com
Drivers' .remove and .shutdown callbacks are executed on different code
paths. The former is called when a device is removed from the bus, while
the latter is called at system shutdown time to quiesce the device.
This means that some overlap exists between the two, because both have to
take care of properly shutting down the hardware. But currently the logic
used in these two callbacks isn't consistent in msm drivers, which could
lead to kernel panic.
For example, on .remove the component is deleted and its .unbind callback
leads to the hardware being shutdown but only if the DRM device has been
marked as registered.
That check doesn't exist in the .shutdown logic and this can lead to the
driver calling drm_atomic_helper_shutdown() for a DRM device that hasn't
been properly initialized.
A situation like this can happen if drivers for expected sub-devices fail
to probe, since the .bind callback will never be executed. If that is the
case, drm_atomic_helper_shutdown() will attempt to take mutexes that are
only initialized if drm_mode_config_init() is called during a device bind.
This bug was attempted to be fixed in commit 623f279c77 ("drm/msm: fix
shutdown hook in case GPU components failed to bind"), but unfortunately
it still happens in some cases as the one mentioned above, i.e:
systemd-shutdown[1]: Powering off.
kvm: exiting hardware virtualization
platform wifi-firmware.0: Removing from iommu group 12
platform video-firmware.0: Removing from iommu group 10
------------[ cut here ]------------
WARNING: CPU: 6 PID: 1 at drivers/gpu/drm/drm_modeset_lock.c:317 drm_modeset_lock_all_ctx+0x3c4/0x3d0
...
Hardware name: Google CoachZ (rev3+) (DT)
pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drm_modeset_lock_all_ctx+0x3c4/0x3d0
lr : drm_modeset_lock_all_ctx+0x48/0x3d0
sp : ffff80000805bb80
x29: ffff80000805bb80 x28: ffff327c00128000 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000001 x24: ffffc95d820ec030
x23: ffff327c00bbd090 x22: ffffc95d8215eca0 x21: ffff327c039c5800
x20: ffff327c039c5988 x19: ffff80000805bbe8 x18: 0000000000000034
x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000
x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffff327c00128000 x1 : 0000000000000000 x0 : ffff327c039c59b0
Call trace:
drm_modeset_lock_all_ctx+0x3c4/0x3d0
drm_atomic_helper_shutdown+0x70/0x134
msm_drv_shutdown+0x30/0x40
platform_shutdown+0x28/0x40
device_shutdown+0x148/0x350
kernel_power_off+0x38/0x80
__do_sys_reboot+0x288/0x2c0
__arm64_sys_reboot+0x28/0x34
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x44/0xec
do_el0_svc+0x2c/0xc0
el0_svc+0x2c/0x84
el0t_64_sync_handler+0x11c/0x150
el0t_64_sync+0x18c/0x190
---[ end trace 0000000000000000 ]---
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000010eab1000
[0000000000000018] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
...
Hardware name: Google CoachZ (rev3+) (DT)
pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ww_mutex_lock+0x28/0x32c
lr : drm_modeset_lock_all_ctx+0x1b0/0x3d0
sp : ffff80000805bb50
x29: ffff80000805bb50 x28: ffff327c00128000 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000001 x24: 0000000000000018
x23: ffff80000805bc10 x22: ffff327c039c5ad8 x21: ffff327c039c5800
x20: ffff80000805bbe8 x19: 0000000000000018 x18: 0000000000000034
x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000
x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffff327c00128000 x1 : 0000000000000000 x0 : 0000000000000018
Call trace:
ww_mutex_lock+0x28/0x32c
drm_modeset_lock_all_ctx+0x1b0/0x3d0
drm_atomic_helper_shutdown+0x70/0x134
msm_drv_shutdown+0x30/0x40
platform_shutdown+0x28/0x40
device_shutdown+0x148/0x350
kernel_power_off+0x38/0x80
__do_sys_reboot+0x288/0x2c0
__arm64_sys_reboot+0x28/0x34
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x44/0xec
do_el0_svc+0x2c/0xc0
el0_svc+0x2c/0x84
el0t_64_sync_handler+0x11c/0x150
el0t_64_sync+0x18c/0x190
Code: aa0103f4 d503201f d2800001 aa0103e3 (c8e37c02)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Kernel Offset: 0x495d77c00000 from 0xffff800008000000
PHYS_OFFSET: 0xffffcd8500000000
CPU features: 0x800,00c2a015,19801c82
Memory Limit: none
---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
Fixes: 9d5cbf5fe4 ("drm/msm: add shutdown support for display platform_driver")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220816134612.916527-1-javierm@redhat.com
Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be more applicable.
Besides that, commit e57924d4ae ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.
In order to do this renaming the following script was used:
```
#!/bin/bash
DIRS="drivers/gpu include/drm Documentation/gpu"
REGEX_SYM_UPPER="[0-9A-Z_\-]"
REGEX_SYM_LOWER="[0-9a-z_\-]"
REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)"
REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)"
REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"
# Find all upper case 'CMA' symbols and replace them with 'DMA'.
for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
do
sed -i -E "$REGEX_SED_UPPER" $ff
done
# Find all lower case 'cma' symbols and replace them with 'dma'.
for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
do
sed -i -E "$REGEX_SED_LOWER" $ff
done
# Replace all occurrences of 'CMA' / 'cma' in comments and
# documentation files with 'DMA' / 'dma'.
for ff in $(grep -RiHl " cma " $DIRS)
do
sed -i -E "s/ cma / dma /g" $ff
sed -i -E "s/ CMA / DMA /g" $ff
done
# Rename all 'cma_obj's to 'dma_obj'.
for ff in $(grep -RiHl "cma_obj" $DIRS)
do
sed -i -E "s/cma_obj/dma_obj/g" $ff
done
```
Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files
- select CMA if HAVE_DMA_CONTIGUOUS
+ select DMA if HAVE_DMA_CONTIGUOUS
as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "GEM CMA", but not "FB CMA".
Also drivers/gpu/drm/Makefile was fixed up manually after renaming
drm_gem_cma_helper.c to drm_gem_dma_helper.c.
This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
Change msm_kms_init_aspace() to use generic function
device_iommu_mapped() instead of the fwnode-specific interface
dev_iommu_fwspec_get(). While we are at it, stop referencing
platform_bus_type directly and use the bus of the IOMMU device.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489703/
Link: https://lore.kernel.org/r/20220616081106.350262-6-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Even if some IOMMU has registered itself on the platform "bus", that
doesn't necessarily mean it provides translation for the device we
care about. Replace iommu_present() with a more appropriate check.
On Qualcomm platforms the IOMMU can be specified either for the MDP/DPU
device or for its parent MDSS device depending on the actual platform.
Check both of them, since that is how both DPU and MDP5 drivers work.
Co-developed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/489699/
Link: https://lore.kernel.org/r/20220616081106.350262-4-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
If a GEM object is allocated, and then exported as a dma-buf fd which is
mmap'd before or without the GEM buffer being directly mmap'd, the
vma_node could be unitialized. This leads to a situation where the CPU
mapping is not correctly torn down in drm_vma_node_unmap().
Fixes: e551655399 ("drm: call drm_gem_object_funcs.mmap with fake offset")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220531200857.136547-1-robdclark@gmail.com
Add explicit include of drm_bridge.h to the msm_drv.c to fix the
following warning:
drivers/gpu/drm/msm/msm_drv.c:236:17: error: implicit declaration of function 'drm_bridge_remove'; did you mean 'drm_bridge_detach'? [-Werror=implicit-function-declaration]
Fixes: d28ea55626 ("drm/msm: properly add and remove internal bridges")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/484310/
Link: https://lore.kernel.org/r/20220430180917.3819294-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add calls to drm_bridge_add()/drm_bridge_remove() DRM bridges created by
the driver. This fixes the following warning.
WARNING: CPU: 0 PID: 1 at kernel/locking/mutex.c:579 __mutex_lock+0x840/0x9f4
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.18.0-rc1-00002-g3054695a0d27-dirty #55
Hardware name: Generic DT based system
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x58/0x70
dump_stack_lvl from __warn+0xc8/0x1e8
__warn from warn_slowpath_fmt+0x78/0xa8
warn_slowpath_fmt from __mutex_lock+0x840/0x9f4
__mutex_lock from mutex_lock_nested+0x1c/0x24
mutex_lock_nested from drm_bridge_hpd_enable+0x2c/0x84
drm_bridge_hpd_enable from msm_hdmi_modeset_init+0xc0/0x21c
msm_hdmi_modeset_init from mdp4_kms_init+0x53c/0x90c
mdp4_kms_init from msm_drm_bind+0x514/0x698
msm_drm_bind from try_to_bring_up_aggregate_device+0x160/0x1bc
try_to_bring_up_aggregate_device from component_master_add_with_match+0xc4/0xf8
component_master_add_with_match from msm_pdev_probe+0x274/0x350
msm_pdev_probe from platform_probe+0x5c/0xbc
platform_probe from really_probe.part.0+0x9c/0x290
really_probe.part.0 from __driver_probe_device+0xa8/0x13c
__driver_probe_device from driver_probe_device+0x34/0x10c
driver_probe_device from __driver_attach+0xbc/0x178
__driver_attach from bus_for_each_dev+0x74/0xc0
bus_for_each_dev from bus_add_driver+0x160/0x1e4
bus_add_driver from driver_register+0x88/0x118
driver_register from do_one_initcall+0x6c/0x334
do_one_initcall from kernel_init_freeable+0x1bc/0x220
kernel_init_freeable from kernel_init+0x18/0x12c
kernel_init from ret_from_fork+0x14/0x2c
Fixes: 3d3f8b1f8b ("drm/bridge: make bridge registration independent of drm flow")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/481778/
Link: https://lore.kernel.org/r/20220411234953.2425280-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The msm_mdss serves several roles at this moment. It provides IRQ domain
used by MDP5 and DPU drivers but it also serves as a component master
for both those usecases. MDP4 (which does not have separate MDSS device)
is the component master on it's own.
Remove this assymmetry and make both MDP5 and DPU component masters too.
This removes a need to care about drm/components from msm_mdss driver,
removes an mdss pointer from struct msm_drm_private and simplifies the
interface between mdp5/dpu and msm_drv.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482512/
Link: https://lore.kernel.org/r/20220419155346.1272627-7-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Let's make the match's data pointer a (sub-)driver's private data. The
only user currently is the msm_drm_init() function, using this data to
select kms_init callback. Pass this callback through the driver's
private data instead.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482510/
Link: https://lore.kernel.org/r/20220419155346.1272627-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently the msm platform driver is a multiplex handling several cases:
- headless GPU-only driver,
- MDP4 with flat device nodes,
- MDP5/DPU MDSS with all the nodes being children of MDSS node.
This results in not-so-perfect code, checking the hardware version
(MDP4/MDP5/DPU) in several places, checking for mdss even when it can
not exist, etc. Split the code into three handling subdrivers (mdp4,
mdss and headless msm).
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482507/
Link: https://lore.kernel.org/r/20220419155346.1272627-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Since now there is just one mdss subdriver, drop all the indirection,
make msm_mdss struct completely opaque (and defined inside msm_mdss.c)
and call mdss functions directly.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482505/
Link: https://lore.kernel.org/r/20220419155346.1272627-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
MDP5 and DPU1 both provide the driver handling the MDSS region, which
handles the irq domain and (incase of DPU1) adds some init for the UBWC
controller. Unify those two pieces of code into a common driver.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482506/
Link: https://lore.kernel.org/r/20220419155346.1272627-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The motivation at this point is mainly native userspace mesa driver in a
VM guest. The one remaining synchronous "hotpath" is buffer allocation,
because guest needs to wait to know the bo's iova before it can start
emitting cmdstream/state that references the new bo. By allocating the
iova in the guest userspace, we no longer need to wait for a response
from the host, but can just rely on the allocation request being
processed before the cmdstream submission. Allocation failures (OoM,
etc) would just be treated as context-lost (ie. GL_GUILTY_CONTEXT_RESET)
or subsequent allocations (or readpix, etc) can raise GL_OUT_OF_MEMORY.
v2: Fix inuse check
v3: Change mismatched iova case to -EBUSY
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/r/20220411215849.297838-11-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
The 64b value field is already suffient to hold a pointer instead of
immediate, but we also need a length field.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220317165144.222101-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Here is the set of driver core changes for 5.18-rc1.
Not much here, primarily it was a bunch of cleanups and small updates:
- kobj_type cleanups for default_groups
- documentation updates
- firmware loader minor changes
- component common helper added and take advantage of it in many
drivers (the largest part of this pull request).
There will be a merge conflict in drivers/power/supply/ab8500_chargalg.c
with your tree, the merge conflict should be easy (take all the
changes).
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG6PA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylMFwCfSIyAU4oLEgj+/Rfmx4o45cAVIWMAnit3zbdU
wUUCGqKcOnTJEcW6dMPh
=1VVi
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.18-rc1.
Not much here, primarily it was a bunch of cleanups and small updates:
- kobj_type cleanups for default_groups
- documentation updates
- firmware loader minor changes
- component common helper added and take advantage of it in many
drivers (the largest part of this pull request).
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits)
Documentation: update stable review cycle documentation
drivers/base/dd.c : Remove the initial value of the global variable
Documentation: update stable tree link
Documentation: add link to stable release candidate tree
devres: fix typos in comments
Documentation: add note block surrounding security patch note
samples/kobject: Use sysfs_emit instead of sprintf
base: soc: Make soc_device_match() simpler and easier to read
driver core: dd: fix return value of __setup handler
driver core: Refactor sysfs and drv/bus remove hooks
driver core: Refactor multiple copies of device cleanup
scripts: get_abi.pl: Fix typo in help message
kernfs: fix typos in comments
kernfs: remove unneeded #if 0 guard
ALSA: hda/realtek: Make use of the helper component_compare_dev_name
video: omapfb: dss: Make use of the helper component_compare_dev
power: supply: ab8500: Make use of the helper component_compare_dev
ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of
iommu/mediatek: Make use of the helper component_compare/release_of
drm: of: Make use of the helper component_release_of
...
Add a way for userspace to specify the sequence number fence used to
track completion of the submit. As the seqno fence is simply an
incrementing counter which is local to the submitqueue, it is easy for
userspace to know the next value.
This is useful for native userspace drivers in a vm guest, as the guest
to host roundtrip can have high latency. Assigning the fence seqno in
the guest userspace allows the guest to continue without waiting for
response from the host.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220224222321.60653-1-robdclark@gmail.com
Add a SYSPROF param for system profiling tools like Mesa's pps-producer
(perfetto) to control behavior related to system-wide performance
counter collection. In particular, for profiling, one wants to ensure
that GPU context switches do not effect perfcounter state, and might
want to suppress suspend (which would cause counters to lose state).
v2: Swap the order in msm_file_private_set_sysprof() [sboyd] and
initialize the sysprof_active refcount to one (because the under/
overflow checking in refcount_t doesn't expect a 0->1 transition)
meaning that values greater than 1 means sysprof is active.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220304005317.776110-4-robdclark@gmail.com
It was always expected to have a use for this some day, so we left a
placeholder. Now we do. (And I expect another use in the not too
distant future when we start allowing userspace to allocate GPU iova.)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220304005317.776110-3-robdclark@gmail.com
We're experimenting a bit with the process this time, with Dmitry
collecting display patches and merging them into msm-next with me
handling the gpu/etc side of things. Summary of interesting new bits
and pieces
* dpu + dp support for sc8180x
* dp support for sm8350
* dpu + dsi support for qcm2290
* 10nm dsi phy tuning support
* bridge support for dp encoder
* gpu support for additional 7c3 SKUs
* assorted cleanups and fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGu=Jdrw6DqYOYPTMks7=zatrsvdR=o6DpjqZ=TQQhFZuw@mail.gmail.com
Add SC8180x to the hardware catalog, for initial support for the
platform. Due to limitations in the DP driver only one of the four DP
interfaces is left enabled.
The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and
the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this
is flagged appropriately to ensure widebus is disabled - for now.
Signed-off-by: Rob Clark <robdclark@chromium.org>
[bjorn: Reworked intf and irq definitions]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Bringup functionality for MSM8998 in the DPU, driver which is mostly
the same as SDM845 (just a few variations).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Jami Kettunen <jami.kettunen@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220113145111.29984-3-jami.kettunen@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
With the reglog removal, msm_readl/_writel became single line wrappers
around readl/writel. Move those two wrappers and msm_rmw to msm_drv.h to
remove need for extra function calls when doing register writes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220105232700.444170-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
msm_ioremap() functions take additional argument dbgname which is now
unused.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220105232700.444170-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Register logging was used during early stages of msm driver development
to compare upstream and downstream register traces. However the tool was
never updated to work with mdp5 hardware. Later it was dropped
completely when Rob imported freedreno tools into mesa. All this makes
DRM_MSM_REGISTER_LOGGING irrelevant now, so it can be dropped.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220105232700.444170-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
First backmerge into drm-misc-next. Required for more helpers backmerged,
and to pull in 5.17 (rc2).
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
According to disable Documentation/admin-guide/kernel-parameters.txt, this
parameter can be used to disable kernel modesetting.
DRM drivers will not perform display-mode changes or accelerated rendering
and only the system framebuffer will be available if it was set-up.
But only a few DRM drivers currently check for nomodeset, make this driver
to also support the command line parameter.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-30-javierm@redhat.com
The code that uses variable mdss has been removed, So the declaration
and assignment of the variable can be removed.
Eliminate the following clang warning:
drivers/gpu/drm/msm/msm_drv.c:513:19: warning: variable 'mdss' set but
not used [-Wunused-but-set-variable]
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 2027e5b341 ("drm/msm: Initialize MDSS irq domain at probe time")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211216031103.34146-1-yang.lee@linux.alibaba.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Since commit 8f59ee9a57 ("drm/msm/dsi: Adjust probe order"), the
DSI host gets initialized earlier, but this caused unability to probe
the entire stack of components because they all depend on interrupts
coming from the main `mdss` node (mdp5, or dpu1).
To fix this issue, move mdss device initialization (which include irq
domain setup) to msm_mdev_probe() time, as to make sure that the
interrupt controller is available before dsi and/or other components try
to initialize, finally satisfying the dependency.
Fixes: 8f59ee9a57 ("drm/msm/dsi: Adjust probe order")
Co-Developed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20211201202023.2313971-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
In preparation for registering the mdss interrupt controller earlier,
move the allocation of msm_drm_private from component bind time to
msm_drv probe; this also allows us to use the devm variant of kzalloc.
Since it is not right to allocate the drm_device at probe time (as
it should exist only when all components are bound, and taken down
when components get cleaned up), the only way to make this happen is
to pass a pointer to msm_drm_private as driver data (like done in
many other DRM drivers), instead of one to drm_device like it's
currently done in this driver.
This is also simplifying some bind/unbind functions around drm/msm,
as some of them are using drm_device just to grab a pointer to the
msm_drm_private structure, which we now retrieve in one call.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20211201105210.24970-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
In the current implementation, substring comparison
using device node name is used to find mdp node
during driver probe. Use compatible string list instead
of node name to get mdp node from the parent mdss node.
Signed-off-by: Krishna Manikandan <quic_mkrishn@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Changes in v2:
- Use compatible lists instead of duplicate string
check (Stephen Boyd)
Changes in v3:
- Use match tables to find the mdp node (Stephen Boyd)
Changes in v4:
- Drop EXPORT_SYMBOL (Dmitry Baryshkov)
Link: https://lore.kernel.org/r/1636541507-5144-1-git-send-email-quic_mkrishn@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add some helpers for fence comparision, which handle rollover properly,
and stop open coding fence seqno comparisions.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20211109181117.591148-5-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
cur_ctx_seqno already does the same thing, but handles the edge cases
where a refcnt'd context can live after lastclose. So let's not have
two ways to do the same thing.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20211109181117.591148-3-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
MSM DRM driver has support for eDP block present on MSM 8x74/8x84 SoC
families. However since addition back in 2015 this driver received only
generic fixes. No actual devices with these SoCs supported upstream (or
by the community) seem to support eDP panels. Judging from downstream
kernels the eDP was present only on MSM8974 LIQUID or on APQ8084 CDP.
Remove this driver.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211001165011.441945-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[rob: Rebased on "drm: msm: fix building without CONFIG_COMMON_CLK"]
Signed-off-by: Rob Clark <robdclark@chromium.org>
When converting to use an idr to map userspace fence seqno values back
to a dma_fence, we lost the error return when userspace passes seqno
that is larger than the last submitted fence. Restore this check.
Reported-by: Akhil P Oommen <akhilpo@codeaurora.org>
Fixes: a61acbbe9c ("drm/msm: Track "seqno" fences by idr")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20211111192457.747899-3-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
We weren't dropping the submitqueue reference in all paths. In
particular, when the fence has already been signalled. Split out
a helper to simplify handling this in the various different return
paths.
Fixes: a61acbbe9c ("drm/msm: Track "seqno" fences by idr")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20211111192457.747899-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Since commit 98659487b8 ("drm/msm: add support to take dpu snapshot")
the following NULL pointer dereference is seen on i.MX53:
[ 3.275493] msm msm: bound 30000000.gpu (ops a3xx_ops)
[ 3.287174] [drm] Initialized msm 1.8.0 20130625 for msm on minor 0
[ 3.293915] 8<--- cut here ---
[ 3.297012] Unable to handle kernel NULL pointer dereference at virtual address 00000028
[ 3.305244] pgd = (ptrval)
[ 3.307989] [00000028] *pgd=00000000
[ 3.311624] Internal error: Oops: 805 [#1] SMP ARM
[ 3.316430] Modules linked in:
[ 3.319503] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0+g682d702b426b #1
[ 3.326652] Hardware name: Freescale i.MX53 (Device Tree Support)
[ 3.332754] PC is at __mutex_init+0x14/0x54
[ 3.336969] LR is at msm_disp_snapshot_init+0x24/0xa0
i.MX53 does not use the DPU controller.
Fix the problem by only calling msm_disp_snapshot_init() on platforms that
use the DPU controller.
Cc: stable@vger.kernel.org
Fixes: 98659487b8 ("drm/msm: add support to take dpu snapshot")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210914174831.2044420-1-festevam@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
In theory a context can be destroyed and a new one allocated at the same
address, making the pointer comparision to detect when we don't need to
update the current pagetables invalid. Instead assign a sequence number
to each context on creation, and use this for the check.
Fixes: 84c31ee16f ("drm/msm/a6xx: Add support for per-instance pagetables")
Signed-off-by: Rob Clark <robdclark@chromium.org>
This is the main pull for v5.15, after the early pull request with
drm/scheduler conversion:
* New a6xx GPU support: a680 and 7c3
* dsi: 7nm phi, sc7280 support, test pattern generator support
* mdp4 fixes for older hw like the nexus7
* displayport fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs_tyanTeDGMH1X+Uf4wdyy7jYj-CinGXXVETiYOESahw@mail.gmail.com
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
DRM IRQ callbacks are now being called directly or inlined.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Acked-by: Rob Clark <robdclark@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-8-tzimmermann@suse.de
When it fail to create crtc_event kthread, it just jump to err_msm_uninit,
while the 'ret' is not updated. So assign the return code before that.
Fixes: 25fdd5933e ("drm/msm: Add SDM845 DPU support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Li <liwei391@huawei.com>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210705134302.315813-1-liwei391@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Moving the driver-specific mmap code into a GEM object function allows
for using DRM helpers for various mmap callbacks.
The respective msm functions are being removed. The file_operations
structure fops is now being created by the helper macro
DEFINE_DRM_GEM_FOPS().
v2:
* rebase onto latest upstream
* remove declaration of msm_gem_mmap_obj() from msm_fbdev.c
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20210706084753.8194-1-tzimmermann@suse.de
[squash in missing VM_DONTEXPAND flag]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Previously the (non-fd) fence returned from submit ioctl was a raw
seqno, which is scoped to the ring. But from UABI standpoint, the
ioctls related to seqno fences all specify a submitqueue. We can
take advantage of that to replace the seqno fences with a cyclic idr
handle.
This is in preperation for moving to drm scheduler, at which point
the submit ioctl will return after queuing the submit job to the
scheduler, but before the submit is written into the ring (and
therefore before a ring seqno has been assigned). Which means we
need to replace the dma_fence that userspace may need to wait on
with a scheduler fence.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210728010632.2633470-8-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
While keeping the previous default value for hangcheck period,
we allow now the possibility of configuring its value via
debugfs.
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Link: https://lore.kernel.org/r/20210607104441.184700-1-siglesias@igalia.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: 7f9743abaa ("drm/msm: validate display and event threads")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210508022836.1777-1-thunder.leizhen@huawei.com
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Put these debug prints in the vblank code into the appropriate vblank
category via drm_dbg_vbl().
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: aravindh@codeaurora.org
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210430193104.1770538-2-swboyd@chromium.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add a new cache mode for creating coherent host-cached BOs.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Link: https://lore.kernel.org/r/20210423190833.25319-5-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
Instead of looping throught the resources each time to get the DSI CTRL
area size, get it at the ioremap time.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210427001828.2375555-4-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add the msm_disp_snapshot module which adds supports to dump dpu
registers and capture the drm atomic state which can be used in
case of error conditions.
changes in v5:
- start storing disp_state in msm_kms instead of dpu_kms
- get rid of MSM_DISP_SNAPSHOT_IN_* enum by simplifying the functions
- move snprintf inside the snapshot core by using varargs
- get rid of some stale code comments
- allow snapshot module for non-DPU targets
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1618606645-19695-3-git-send-email-abhinavk@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
