Going forward, struct intel_display is the main device data structure
for display. Convert the high level interfaces (init, cleanup, suspend,
resume, etc.) of intel_display_power.c over to it. The actual power
get/put etc. are left for follow-up.
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e1761b0fe5081bf6ca21cca3430befe254f61b32.1732808222.git.jani.nikula@intel.com
Move the check for display_irqs_enabled within vlv_display_irq_reset()
and vlv_display_irq_postinstall() to avoid looking at struct
intel_display members within i915 core irq code.
Within display irq code, vlv_display_irq_reset() may need to be called
with !display_irqs_enabled, so add a small wrapper.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ef43e26ebab7f84768391f5053c0eba44b647c89.1732102179.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From LNL onwards there is a new hardware feature, which
allows to detect if the driver wrongly allocated DBuf
entries and they happen to overlap. If enabled this will
cause a specific interrupt to occur.
We now handle it in the driver, by writing correspondent
error message to kernel log.
v2: Initialize dbuf overlap flag in runtime_defaults (Jani Nikula)
v3: Unmask the overlap detection interrupt (Uma)
v4: use display over i915 (Jani Nikula)
v5: Use display instead of dev_priv (Jani Nikula)
v6: rebased to resolve merge conflicts
Bspec: 69450, 69464
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030103319.207235-1-vinod.govindapillai@intel.com
Underrun recovery was defeatured and was never brought into usage.
Thus we can remove the underrun recovery interrupt/reporting
register bits and related logic introduced to detect/report soft,
hard, port underruns.
Essentially this is a revert of the commit 8bcc0840cf
("drm/i915/xelpd: Enhanced pipe underrun reporting") which originally
added this functionality. Also note that PIPE_STATUS_UNDERRUN bit in
PIPESTATUS still stays relevant but we would move back to not
clearing this sticky bit as we are not using any information from
this register.
v2: Extend commit message to add more details (Matt Roper)
v3: Fix the old commit mention in commit message
Signed-off-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241015080503.3521063-1-sai.teja.pottumuttu@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently workaround is not applied when vblank is enabled on crtc that
needs the workaround if vblank is already enabled for another crtc that
doesn't need the workaround. Fix this by increasing counter only if crtc
needs the workaround.
Fixes: aa451abcff ("drm/i915/display: Prevent DC6 while vblank is enabled for Panel Replay")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009134225.1322820-2-jouni.hogander@intel.com
We are about to change meaning of vblank_enabled to fix Panel Replay vblank
workaround. For sake of clarity we need to rename it. Vblank_enabled is
used for i915gm/i945gm vblank irq workaround as well -> instead of rename
add new counter named as vblank_wa_pipes.
v2:
- s/vblank_wa_pipes/vblank_wa_num_pipes/
- use int as a type for the counter
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009134225.1322820-1-jouni.hogander@intel.com
Define register offset triplets for all registers used with
GEN8_IRQ_RESET_NDX() and GEN8_IRQ_INIT_NDX() macros, and call the
underlying gen3_irq_reset() and gen3_irq_init() functions
directly. Remove the macros, along with the macro name concatenation
hackery.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241002102645.136155-3-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Define register offset triplets for all registers used with
GEN3_IRQ_RESET() and GEN3_IRQ_INIT() macros, and call the underlying
gen3_irq_reset() and gen3_irq_init() functions directly. Remove the
macros, along with the macro name concatenation hackery.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241002102645.136155-2-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Turns out CRC interrupts also fail to wake up i915gm/i945gm from
C2+. I suppose this is a generic problem, but for most other
interrupts the system will be busy enough already prior to
the irq being issued. But CRC interrupts are like vblank interrupts
and only fire once per frame, so plenty of time to fall asleep
in between them.
Apply the same core clock gating trick to CRC interrupts
that we use for vblank interrupts.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241001195803.3371-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Extract the i915gm/i945gm vblank irq C-state workaround to
separate functions. We'll need to reuse these in order to
guarantee timely CRC interrupt delivery as well.
The irq.vblank_enabled count is currently protected by the
drm vblank locks, so let's assert that the innermost of those
is held, in anticipation of other callers.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241001195803.3371-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The current way of organizing all .vblank_enable() functions
before all .vblabk_disable() functions is infuriating. It's
really hard to compare the enable() vs. disable() for the
same platform to make sure they properly mirror each other.
Reorganize the functions so that the enable+disable for
the same platoform are next to each.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241001195803.3371-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The only real reason why we have the gen2 vs. gen3+ split
in irq handling is that bspec claims that IIR/IMR/IER/ISR
and EMR are only 16 bits on gen2, as opposed to being 32
bits on gen3+. That doesn't seem to be a meaningful
distinction as 32bit access to these registers works
perfectly fine on gen2
Interestingly the 16 msbs of IMR are in fact hardcoded
to 1 on gen2, which to me indicates that 32bit access
was the plan all along, and perhaps someone just forgot
to update the spec.
Nuke the special 16bit gen2 irq code and switch over to
the gen3 code.
Gen2 doesn't have the ASLE interrupt, which just needs
a small tweak in i915_irq_postinstall().
And so far we've not had a codepath that could enable the
legacy BLC interrupt on gen2. Now we do, but we'll never
actually do it since gen2 machines don't have OpRegion.
(and neither do i915/i945 machines btw). On these older
platforms the legacy BLC interrupt is meant to be used
in conjunction with the LBPC backlight stuff, but we
never actually switch off the legacy/combination mode
and thus don't use the interrupt either.
This was quickly smoke tested on all gen2 variants.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240927143545.8665-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
i915_has_asle() is a bit of a mess. It does some kind of
partial check whether the platform has the legacy BLC
interrupt or not, and then it checks whether OpRegion
ASLE is present.
Let's split the legacy BLC interrupt check into its
own thing, and while at it let's make it accurate.
Currently it misses i85x (not a problem since gen2
never has OpRegion, nor do we currently call
i915_enable_asle_pipestat() on gen2), and it
doesn't reject ILK-M (not that anyone should call
this on ILK). The exlusion of VLV/CHV (where one
might even consider calling this, being gmch
platforms) only happens due to .is_mobile==false.
List the platforms that actually do have the legacy
BLC interrupt in a bit more explicit fashion.
i915gm/i945gm/i965gm/gm45 we can cover with a
display_ver+is_mobile check, pnv needs an exception
due to having a variant with is_mobile==false, and
i85x is the only relevant gen2 platform so easier to
handle on its own.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240927143545.8665-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We need to block DC6 entry in case of Panel Replay as enabling VBI doesn't
prevent DC6 in case of Panel Replay. This causes problems if user-space is
polling for vblank events.
Fix this by setting target DC state as DC_STATE_EN_UPTO_DC5 when both
source and sink are supporting eDP Panel Replay and VBI is enabled.
v4:
- s/vblank_work/vblank_dc_work/
- changed type of block_dc_for_vblank to bool
v3:
- do flush_work for vblank_work on intel_crtc_vblank_off
- no need to use READ_ONCE in bdw_enable_vblank
- check crtc->block_dc_for_vblank in bdw_disable_vblank as well
- move adding block_dc_for_vblank into this patch
v2:
- use READ_ONCE in intel_display_vblank_work
- use DC_STATE_DISABLE instead of DC_STATE_EN_UPTO_DC6
- use intel_crtc->block_dc6_needed
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2296
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240920062340.1333777-3-jouni.hogander@intel.com
The raw register reads/writes are there as micro-optimizations to avoid
multiple pointer indirections on uncore->regs. Presumably this is useful
when there are plenty of register reads/writes in the same
function. However, the display irq handling only has a few raw
reads/writes. Remove them for simplification.
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408125445.3227678-1-jani.nikula@intel.com
Enable all DSB error/fault interrupts so that we can see if
anything goes terribly wrong.
v2: Pass intel_display to DISPLAY_VER() (Jani)
Drop extra '/' from drm_err() for consistency
v3: Reorder the irq handler a bit
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625135852.13431-1-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Going forward, struct intel_display shall replace struct
drm_i915_private as the main display device data pointer type. Convert
intel_opregion.[ch] to struct intel_display.
v2:
- Fix declarations for !CONFIG_ACPI (Imre, kernel test robot)
- Pass encoder/connector directly to intel_display() (Imre)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/aef94503909bbbf95f0244dc382a4d4cd050b903.1723213547.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Log the address of the register that caused the timeout
interrupt by reading RMTIMEOUTREG_CAPTURE
--v2:
- Update RMTIMEOUTREG_CAPTURE naming (Suraj)
--v3:
- XeLpdp naming convention.
- Use if condition instead of else if
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807142106.1270213-1-mitulkumar.ajitkumar.golani@intel.com
PipeDMC has its own fault interrupt. Enable that so that
we can know if things are failing.
While at it, define the other pipeDMC interrupt as well, even
though we're not currently using it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240605111832.21373-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
On hsw+ we only have one CRC result register, instead of the
five we have on ivb, and some of the others have been repurposed
to serve other CRC related purposes.
Since the hsw+ vs. pre-hsw register operate quite differently
let's add a separate definition for the hsw+ variant to make the
situation a bit more clear. Also since we only use this from a
hsw+ codepath there is no real benefit to be had with reusing
the ivb register definition.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531115342.2763-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
PIPE_CRC_RES_*_IVB are proper pipe registers, and only valid
for IVB+ where pipe register blocks are equally spaced, so we
can switch from _MMIO_TRANS2() to the simpler _MMIO_PIPE() for
these.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531115342.2763-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Correct the implementation trying to detect MTL PCH with
the MTL fake PCH id.
On MTL, both the North Display (NDE) and South Display (SDE) functionality
reside on the same die (the SoC die in this case), unlike many past
platforms where the SDE was on a separate PCH die. The code is (badly)
structured today in a way that assumes the SDE is always on the PCH for
modern platforms, so on platforms where we don't actually need to identify
the PCH to figure out how the SDE behaves (i.e., all DG1/2 GPUs as well as
MTL and LNL),we've been assigning a "fake PCH" as a quickhack that allows
us to avoid restructuring a bunch of the code.we've been assigning a
"fake PCH" as a quick hack that allows us to avoid restructuring a bunch
of the code.
Removed unused macros of LNL amd MTL as well.
v2: Reorder PCH_MTL conditional check (Matt Roper)
Reverting to PCH_MTL for PICA interrupt(Matt Roper)
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231219185233.1469675-1-haridhar.kalvala@intel.com
