Add to_intel_uncore() function to avoid the inclusion of i915_drv.h from
intel_de.h. This reveals a number of implicit dependencies on i915_drv.h
that need to be added.
For now, to_intel_uncore() can be an inline function, with all the
includes in compat intel_uncore.h, as long as i915_drv.h isn't
included. The implicit dependencies on i915_drv.h is a problem in
display code, but the same is not true for xe_device.h etc.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/377e2b400d126776224fc49874ed9cb03ac3123c.1732104170.git.jani.nikula@intel.com
Add a helper to compute the number of pipes required.
This will depend on whether the joiner is required or is forced through
the debugfs. If no joiner is required the helper returns 1.
v2:
-Return 1 if no joiner is required. (Ville)
-Change the suffix from joined_pipes to num_pipes. (Ville)
-Use number of pipes while calculating joined_pipe masks and
max_dotclk. (Ville)
v3: Simplify and rename the helper to intel_dp_num_joined_pipes(). Ville
v4: Remove redundant 'fallthrough' statement. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240926134322.3728021-5-ankit.k.nautiyal@intel.com
At the moment, the debugfs for joiner allows only to force enable/disable
pipe joiner for 2 pipes. Modify it to force join 'n' number of pipes,
where n is a valid pipe joiner configuration.
This will help in case of ultra joiner where 4 pipes are joined.
v2:
-Fix commit message to state that only valid joiner config can be
forced. (Suraj)
-Rename the identifiers to have INTEL_BIG/NONE_JOINER_PIPES. (Suraj)
v3:
-Avoid enum for joiner pipe counts, use bare numbers for better
readability. (Ville)
-Remove redundant prints from debugfs. (Ville)
v4: Return -EINVAL if joiner forced to an invalid value.
v5: Remove extra debug message. (Ville)
v6: Minor fix in switch case. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240926134322.3728021-4-ankit.k.nautiyal@intel.com
Currently we support joiner only for DP encoder.
Do not create the debugfs for joiner if DP does not support the joiner.
This will also help avoiding cases where config has eDP MSO, with which
we do not support joiner.
v2: Check for intel_dp_has_joiner and avoid creating debugfs if not
supported. (Ville)
v3: Remove HAS_BIGJOINER check. (Ville)
v4: Reverse checks for connector type and intel_dp_has_joiner(). (Ville)
v5: Drop the local variable intel_dp and use intel_attached_dp() directly.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240926134322.3728021-3-ankit.k.nautiyal@intel.com
Add dedicated intel_display_caps for display, with device info and
params. Intentionally prefix the file intel_ instead of i915_. Going
forward, we should do the same for all debugfs files, making them
independent of i915 and xe.
Remove display param dumping from i915 specific i915_capabilities
debugfs.
Note that we don't add node_to_intel_display() functionality in
to_intel_display(). It's too specific for that.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1b825b893dd2d423da167a7b6b21d05e8cd0182c.1726231866.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Correctly spelled comments make it easier for the reader to understand
the code.
Replace 'platformas' with 'platforms' in the comment &
replace 'prefere' with 'prefer' in the comment &
replace 'corresponsding' with 'corresponding' in the comment &
replace 'harizontal' with 'horizontal' in the comment.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240913061727.170198-1-yanzhen@vivo.com
Add macros to check if platform supports bigjoiner/uncompressed joiner.
Replace the existing DISPLAY_VER checks with these.
Additionally use it before readout for joiner stuff, where its missing.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240912132931.1320686-1-ankit.k.nautiyal@intel.com
struct intel_display will replace struct drm_i915_private as
the main thing for display code. Convert the CDCLK code to
use it (as much as possible at this stage).
v2: Add local 'display' variable to __intel_display_device_info_runtime_init() (Jani)
Simplify the to_intel_display(crtc_state) stuff (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240906143306.15937-3-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use a forward declaration for struct cec_notifier instead of including
media/cec-notifier.h in intel_display_types.h, and only include it where
needed.
Also realize that a lot of places depend on including linux/debugfs.h
via intel_display_types.h -> media/cec-notifier.h -> media/cec.h, and
include that too where needed.
v2: hsw_ips.c also needs debugfs.h (kernel test robot)
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240827104521.4151471-1-jani.nikula@intel.com
Going forward, struct intel_display shall replace struct
drm_i915_private as the main display device data pointer type. Convert
intel_display_params.[ch] and intel_display_debugfs_params.[ch] to
struct intel_display.
Some stragglers are left behind where needed.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3e5cc1744eaf4708b08303e3e7e194035d7941cc.1724342644.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Going forward, struct intel_display shall replace struct
drm_i915_private as the main display device data pointer type. Convert
intel_opregion.[ch] to struct intel_display.
v2:
- Fix declarations for !CONFIG_ACPI (Imre, kernel test robot)
- Pass encoder/connector directly to intel_display() (Imre)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/aef94503909bbbf95f0244dc382a4d4cd050b903.1723213547.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Switch the FBC code over to intel_display from i915, as
much as possible. This is the future direction so that
the display code can be shared between i915 and xe more
cleanly.
Some of the platform checks and the stolen mem facing stiff
still need i915 around though.
v2: Drop some redundant to_i915() casts
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240705145254.3355-3-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add connector debugfs entries to force the link rate/lane count to be
used by a link training afterwards. These settings will be clamped to
the supported, i.e. the source's and sink's common rate/lane count.
After forcing the link rate/lane count reset the link training
parameters and for a non-auto setting disable reducing the link
parameters via the fallback logic. The former one can be used after
testing link training failure scenarios - via debugfs entries added
later - to reset the reduced link parameters after the test.
v2:
- Add the entries from intel_dp_link_training.c (Jani)
- Rename the entries to i915_dp_set_link_rate/lane_count.
v3: (Ville)
- Rename the entries/struct fields to force_link_rate/lane_count.
- Lock connection_mutex only for the required intel_dp state.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-18-imre.deak@intel.com
According to BSpec we now should call "master" pipes, "primary" pipes
and "slave" pipes, should be "secondary" pipes.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
[vsyrjala: Don't rename port sync stuff, catch a few more things]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240603112551.6481-3-stanislav.lisovskiy@intel.com
Lets unify both bigjoiner and ultrajoiner under simple "joiner" name,
because in future we might have multiple configurations, involving
multiple bigjoiners, ultrajoiner, however it is possible to use
same api for handling both.
v2: - Renamed back some bigjoiner specific parts for now(Ville)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
[vsyrjala: Catch a few more cases]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607075457.15700-1-stanislav.lisovskiy@intel.com
Currently intel_connector_info(), which prints the per-connector
output for i915_display_info, just bails out early if the connector
doesn't have a current encoder. That leads to very confusing output
where some of your connected (and properly detected) outputs appear
to have no enumerated modes.
Get rid of the encoder stuff and just rely on the connector itself
so that the output is always consistent.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240329012331.29281-1-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Initialize HDCP capability variables to false to avoid UBSAN
warning in boolean value as some functions invoking this could
return without filling the two capability values.
--v2
-Fix Typo [Chaitanya]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240401030106.274787-2-suraj.kandpal@intel.com
Currently we are only checking capability of remote device and not
immediate downstream device but during capability check we need are
concerned with only the HDCP capability of downstream device.
During i915_display_info reporting we need HDCP Capability for both
the monitors and downstream branch device if any this patch adds that.
--v2
-Use MST Hub HDCP version [Ankit]
--v3
-Redefined how we seprate remote and direct read to make sure HDMI
shim functions are not touched [Ankit]
--v4
- Fix the conditions so that hdcp_info with remote_req true is sent
only when encoder is mst [Ankit]
--v5
-No need to have the MST Hub version in i915_hdcp_sink_capability[Ankit]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223081453.1576918-9-suraj.kandpal@intel.com
Rename hdcp_capable and hdcp_2_2_capable to hdcp_get_capability
and hdcp_2_2_get_capability to properly reflect what these functions
are doing.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223081453.1576918-7-suraj.kandpal@intel.com
For validation purposes, it might be useful to be able to
force Bigjoiner mode, even if current dotclock/resolution
do not require that.
Lets add such to option to debugfs.
v2: - Apparently intel_dp_need_bigjoiner can't be used, when
debugfs entry is created so lets just check manually
the DISPLAY_VER.
v3: - Switch to intel_connector from drm_connector(Jani Nikula)
- Remove redundant modeset lock(Jani Nikula)
- Use kstrtobool_from_user for boolean value(Jani Nikula)
v4: - Apply the changes to proper function(Jani Nikula)
v5: - Removed unnecessary check from i915_bigjoiner_enable_show
(Ville Syrjälä)
- Added eDP connector check to intel_connector_debugfs_add
(Ville Syrjälä)
- Removed debug message in order to prevent dmesg flooding
(Ville Syrjälä)
v6: - Assume now always that m->private is intel_connector
- Fixed other similar conflicts
v7: - Move bigjoiner force option to intel_connector(Ville Syrjälä)
- Use DEFINE_SHOW_STORE_ATTRIBUTE instead of defining fops
manually.(Ville Syrjälä)
v8: - Pass intel_connector to debugfs_create_file, instead of drm_connector.
(Jani Nikula)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212125011.66174-1-uma.shankar@intel.com
- PSR fixes and improvements around selective fetch (Jouni, Ville)
- Remove FBC restrictions for Xe2LPD displays (Vinod)
- Skip some timing checks on BXT/GLK DSI transcoders (Ville)
- DP MST Fixes (Ville)
- Correct the input parameter on _intel_dsb_commit (heminhong)
- Fix IP version of the display WAs (Bala)
- DGFX uses direct VBT pin mapping (Clint)
- Proper handling of bool on PIPE_CONF_CHECK macros (Jani)
- Skip state verification with TBT-ALT mod (Mika Kahona)
- General organization of display code for reusage with Xe
(Jouni, Luca, Jani, Maarten)
- Squelch a sparse warning (Jani)
- Don't use "proxy" headers (Andy Shevchenko)
- Use devm_gpiod_get() for all GPIOs (Hans)
- Fix ADL+ tiled plane stride (Ville)
- Use octal permissions in display debugfs (Jani)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmVyFWMACgkQ+mJfZA7r
E8rVUwf/RWWyIyrlSOvz7okNgLtTn9K2A3WdtY6hPK6XZ/LVlO9MbCPT74E8Pnh3
mtxFK8fma8nXoVWCOxwtLI9HKJXiMgTIxpKAqapO2cU/ScpRZYoRJjaVIEMjiEWs
AhFSh/9D+u6hXeuYhAsg101sbmWmgvoIgoA4Ob2bUNyJOgsi5rLYsCsd0Y5i0qwm
CHvoyabZMXH4cYn19GlfOIxFtJ4StfaTfd5lNKAmXGrfoWTDQ5WkouXSaZ5EozoW
bl7gaF0kxbXH0RPw/A5VfmbHVaOnjWXIYNYN/51u3nvc4Oi1qeoDhKPmp9uJJ8Hr
AfqDo4h2WZkreuy+hB79uFa/YQA92Q==
=XV0u
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2023-12-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Improve display debug msgs and other general clean-ups (Ville, Rahuul)
- PSR fixes and improvements around selective fetch (Jouni, Ville)
- Remove FBC restrictions for Xe2LPD displays (Vinod)
- Skip some timing checks on BXT/GLK DSI transcoders (Ville)
- DP MST Fixes (Ville)
- Correct the input parameter on _intel_dsb_commit (heminhong)
- Fix IP version of the display WAs (Bala)
- DGFX uses direct VBT pin mapping (Clint)
- Proper handling of bool on PIPE_CONF_CHECK macros (Jani)
- Skip state verification with TBT-ALT mod (Mika Kahona)
- General organization of display code for reusage with Xe
(Jouni, Luca, Jani, Maarten)
- Squelch a sparse warning (Jani)
- Don't use "proxy" headers (Andy Shevchenko)
- Use devm_gpiod_get() for all GPIOs (Hans)
- Fix ADL+ tiled plane stride (Ville)
- Use octal permissions in display debugfs (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZXIWG6bRYaUw0w6-@intel.com
DSC_Sink_BPP_Precision entry is added to i915_dsc_fec_support_show
to depict sink's precision.
Also, new debugfs entry is created to enforce fractional bpp.
If Force_DSC_Fractional_BPP_en is set then while iterating over
output bpp with fractional step size we will continue if output_bpp is
computed as integer. With this approach, we will be able to validate
DSC with fractional bpp.
v2:
Add drm_modeset_unlock to new line(Suraj)
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20231110101020.4067342-8-ankit.k.nautiyal@intel.com
Currently all module parameters are handled by i915_param.c/h. This
is a problem for display parameters when Xe driver is used. Add
a mechanism to add parameters specific to the display. This is mainly
copied from i915_[debugfs]_params.[ch]. Parameters are not yet moved. This
is done by subsequent patches.
v2:
- Drop unused predefinition (dentry)
- Clarify need for empty INTEL_DISPLAY_PARAMS_FOR_EACH in comment
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-2-jouni.hogander@intel.com
Create a separate debugfs entry to list the display capabilities
IGT can rely on this debugfs entry for tests that depend on
display device and display runtime info for both xe and i915
drivers.
v2: rename the entry to i915_display_capabilities (Chaitanya)
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018102723.16915-2-vinod.govindapillai@intel.com
