struct intel_display will replace struct drm_i915_private as the main
device pointer for display code. Switch vlv_wait_port_ready() over to
it. The main motivation to do just one function is to stop passing i915
to intel_de_wait(), so its generic wrapper can be removed.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9505ea49dfc8c7a52cacd2749875a680b01e5bbd.1730146000.git.jani.nikula@intel.com
Convert I915_STATE_WARN() to struct intel_display *, and rename to
INTEL_DISPLAY_STATE_WARN(). Do some minor opportunistic struct
drm_i915_private to struct intel_display conversions while at it.
v2: crtc_state may be NULL in intel_connector_verify_state()
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241024162510.2410128-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add changes to DSC which are required for Ultrajoiner.
v2:
-Use correct helper for setting bits for bigjoiner secondary. (Ankit)
-Use primary/secondary instead of master/slave. (Suraj)
v3: Add the ultrajoiner helpers and use it for setting ultrajoiner
bits (Ankit)
v4: Use num_vdsc_instances *= num_joined_pipes (Ville)
v5: Align the helper to get ultrajoiner enabled pipes with other helpers
(Ville)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930163549.416410-7-ankit.k.nautiyal@intel.com
Joiners have specific enabling and disabling order dependent on primary
and secondary pipes. This becomes more complex with ultrajoiner where we
have ultrajoiner primary/secondary pipes in addition to bigjoiner
primary/secondary pipes. To unify the approach that works for present
and future joiner cases, use primary and secondary pipe masks to
iterate over pipes.
If joiner is used, derive bigoiner primary and secondary pipe masks
and use following sequences:
Disabling : disable primary pipes followed by secondary pipes,
Enabling: enable secondary pipes followed by primary pipes.
This works well with ultrajoiner too, as ultrajoiner has 2 bigjoiner
primary/secondary pairs (AC, BD).
For non joiner case, enable/disable based on usual pipe order A-D, D-A
respectively.
v2:
-Simplify the iterator macro. (Ville)
-Use struct intel_display. (Ville)
-Add prefix _intel to the helper name. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240918063016.2667721-3-ankit.k.nautiyal@intel.com
In most of the cases we now try to avoid mentioning things like
"bigjoiner" or "ultrajoiner" trying to unify the API and refer
mostly to all this functionality as "joiner".
In majority cases that should be way to go.
However in some cases we still need to distinguish between
bigjoiner primaries and secondaries(such as DSC register programming).
Create correspondent helper functions and start using them,
in order be prepared for adding ultrajoiner functionality.
v2: Fixed checkpatch warnings (Ankit)
v3: Introduce ultrajoiner helpers in next patch.
v4: Streamline the helpers and add few more. (Ville)
v5: Add comment to clarify that helpers apply to both bigjoiner and
uncompressed joiner configurations. (Ville)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240918063016.2667721-2-ankit.k.nautiyal@intel.com
In preparation of ultrajoiner, use number of pipes in the
intel_mode_valid_max_plane_size helper, instead of joiner flag.
v2: Use num_joined_pipes 1 where there are no joined pipes (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240916102836.2149012-4-ankit.k.nautiyal@intel.com
In preparation of ultrajoiner, use number of joined pipes in the
intel_dp_joiner_needs_dsc helper, instead of joiner flag.
v2: Use intel_crtc_num_joined_pipes. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240916102836.2149012-3-ankit.k.nautiyal@intel.com
struct intel_display will replace struct drm_i915_private as
the main thing for display code. Convert the "i830 power well"
code to use it (as much as possible at this stage).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240906143306.15937-6-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When determining various scanlines for DSB use we should take into
account whether VRR is active at the time when the DSB uses said
scanline information. For now all DSB scanline usage occurs prior
to the actual commit, so we only need to care about the state of
VRR at that time.
I've decided to move intel_crtc_scanline_to_hw() in its entirety
to the DSB code as it will also need to know the actual state
of VRR in order to do its job 100% correctly.
TODO: figure out how much of this could be moved to some
more generic place and perhaps be shared with the CPU
vblank evasion code/etc...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-8-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
According to BSpec we now should call "master" pipes, "primary" pipes
and "slave" pipes, should be "secondary" pipes.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
[vsyrjala: Don't rename port sync stuff, catch a few more things]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240603112551.6481-3-stanislav.lisovskiy@intel.com
Lets unify both bigjoiner and ultrajoiner under simple "joiner" name,
because in future we might have multiple configurations, involving
multiple bigjoiners, ultrajoiner, however it is possible to use
same api for handling both.
v2: - Renamed back some bigjoiner specific parts for now(Ville)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
[vsyrjala: Catch a few more cases]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607075457.15700-1-stanislav.lisovskiy@intel.com
Handle only bigjoiner masters in skl_commit_modeset_enables/disables,
slave crtcs should be handled by master hooks. Same for encoders.
That way we can also remove a bunch of checks like intel_crtc_is_bigjoiner_slave.
v2: - Moved skl_pfit_enable, intel_dsc_enable, intel_crtc_vblank_on to intel_enable_ddi,
so that it is now finally symmetrical with the disable case, because currently
for some weird reason we are calling those from skl_commit_modeset_enables, while
for the disable case those are called from the ddi disable hooks.
v3: - Create intel_ddi_enable_hdmi_or_sst symmetrical to
intel_ddi_post_disable_hdmi_or_sst and move it also under non-mst check.
v4: - Fix intel_enable_ddi sequence
- Call intel_crtc_update_active_timings for slave pipes as well
[v5: vsyrjala: Use the name 'pipe_crtc' for the per-pipe crtc pointer
Use consistent style and naming
Protect macro arguments properly
Drop superfluous changes to the modeset sequence,
this now follows the old non-joiner sequence 100%
apart from just looping in places]
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Manasi Navare <navaremanasi@chromium.org> #v4?
Co-developed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163502.29633-5-ville.syrjala@linux.intel.com
Add a small helper to compute the set of pipes that the current
crtc is using.
And we have at least one trivial place in
intel_ddi_update_active_dpll() where we can use it
immediately, so let's do that.
v2: Use the name 'pipe_crtc' for the per-pipe crtc pointer
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-12-ville.syrjala@linux.intel.com
With bigjoiner the master crtc is the one that will send out the
uapi event/etc. We want that to happen after all the slaves are
done, so let's try to do the commits in reverse order so that
the master comes last.
Even worse, the modeset helper will simply complete the commit
on the slave pipe immediately as it consider the crtc to be inactive
(it can't see our crtc_state->hw.active/etc.).
With regular sync updates this generally doesn't matter all that
much as the slave pipe should typically finish its work during the
same frame as the master pipe. However in case the slave pipe's commit
slips into the next frame we end up in a bit of trouble. This is most
visible with either async flips (currently disabled with bigjoiner
exactly for this reason), and DSB gamma updates. With DSB the problem
happens because the DSB itself will wait until the next start vblank
before starting to execute. So if the master pipe already finished its
commit and the DSB on the slave pipe is still waiting for the next
vblank we will assume the DSB as gotten stuck and terminate it.
Reversing the commit order should ameliarate this for the most part
as the master pipe is guaranteed to start its commit after the slave
pipe started. The one thing that can still screw us over is the fact
that we aren't necessarily going to commit the pipes in the reverse
order as the actual order is dictated by the DDB overlap avoidance.
But that can only happen while other pipes are being enabled/disabled,
and so in the normal steady state we should be safe.
The full fix will involve making the commit machinery aware of the
slave pipes and not finish their commits prematurely. But that
will involve a bit more work than this. And this commit order
reversal will still be beneficial to avoid userspace getting an
-EBUSY from the following page flip if the second pipe's commit
does stretch into the next frame.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-2-ville.syrjala@linux.intel.com
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Add a number of encoder based functions to check if the port/phy of the
encoder is of a certain type, or to convert to phy or tc_port. Initially
these are just wrappers around the existing functions, but they can be
improved to use VBT data or use some cached info in the future.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7b2d350ee42883f2784030c649d16f983bd407bd.1710949619.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Apparently some BXT/GLK systems have DSI panels whose timings
don't agree with the normal cpu transcoder hblank>=32 limitation.
This is perhaps fine as there are no specific hblank/etc. limits
listed for the BXT/GLK DSI transcoders.
Move those checks out from the global intel_mode_valid() into
into connector specific .mode_valid() hooks, skipping BXT/GLK
DSI connectors. We'll leave the basic [hv]display/[hv]total
checks in intel_mode_valid() as those seem like sensible upper
limits regardless of the transcoder used.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9720
Fixes: 8f4b1068e7 ("drm/i915: Check some transcoder timing minimum limits")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Considering what the functions do, intel_dpll.c is a more suitable
location, and lets us make some functions static while at it.
This also means intel_display.c no longer does any DPIO access.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114104534.4180144-1-jani.nikula@intel.com
A follow-up MST patch will need to specify the total BW allocation
overhead, prepare for that here by passing the amount of overhead
to intel_link_compute_m_n(), keeping the existing behavior.
v2:
- Fix passing the correct crtc_state->fec_enable param in
intel_dp_mst_compute_link_config() /
intel_dp_dsc_mst_compute_link_config().
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-13-imre.deak@intel.com
Rename intel_modeset_all_pipes() to intel_modeset_all_pipes_late() to
clarify when the function can be called (vs.
intel_modeset_pipes_in_mask_early()).
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-8-imre.deak@intel.com
Add intel_modeset_pipes_in_mask_early() to modeset a provided set of
pipes, used in a follow-up patch.
As opposed to intel_modeset_all_pipes() which modesets only the active
pipes - others don't requiring programming the HW - modeset all enabled
pipes in intel_modeset_pipes_in_mask_early() which may need to recompute
their state even if they are not active (that is in the DPMS off state).
While at it add DocBook descriptions for the two exported functions.
v2:
- Add a flag controlling if active planes are force updated as well.
- Add DockBook descriptions.
v3:
- For clarity use _early/_late suffixes for the exported functions
instead of the update_active_planes parameter. (Ville)
v4:
- In intel_modeset_pipes_in_mask_early() update only the crtc
flags relevant to the early phase. (Ville)
- Rename intel_modeset_all_pipes() in a separate patch.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-7-imre.deak@intel.com
Convert aux_ch_name() to a helper that prints a string to a caller
provided buffer, and use it to get more consistent aux channel
debugs. Now that all users of aux_ch_name() are in intel_dp_aux.c, we
can make it static too.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230922105645.3991066-1-jani.nikula@intel.com
Sprinkle some asserts to catch any mishaps in the port_mask
vs. output init.
For DDI/DP/HDMI/SDVO I decided that we want to bail out for
an invalid port since those are the encoder types where
we might want consider driving the whole thing from the VBT
child device list, and bogus VBTs could be a real issue
(if for no other reason than the i915.vbt_firmware).
For DVO and HSW/BDW CRT port I just threw the assert in
there for good measure.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616140820.11726-5-ville.syrjala@linux.intel.com
Move the runtime info specific to display into display-specific
structures as has already been done with the constant display info.
v2:
- Rename __runtime to __runtime_defaults for more clarity on the
purpose. (Andrzej)
- Move introduction of DISPLAY_INFO() to previous patch. (Andrzej)
- Drop NO_DISPLAY macro. (Andrzej)
v3:
- Use "{}" instead of "{ 0 }" for empty struct init. (Jani)
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230523195609.73627-4-matthew.d.roper@intel.com
Rather than embeddeding the display's device info within the main device
info structure, just provide a pointer to the display-specific
structure. This is in preparation for moving the display device info
definitions into the display code itself and for eventually allowing the
pointer to be assigned at runtime on platforms that use GMD_ID for
device identification.
In the future, this will also eventually allow the same display device
info structures to be used outside the current i915 code (e.g., from the
Xe driver).
v2:
- Move introduction of DISPLAY_INFO() to this patch. (Andrzej)
v3:
- Also use DISPLAY_INFO() in intel_display_reg_defs.h. (Andrzej)
- Use "{}" instead of "{ 0 }" for empty struct init. (Jani)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230523195609.73627-3-matthew.d.roper@intel.com
During HW readout/sanitization CRTCs can be disabled only if they don't
have an attached encoder (and so the encoder disable hooks don't need to
be called). An upcoming patch will need to disable CRTCs also with an
attached encoder, so add support for this.
For bigjoiner configs the encoder disabling hooks require the slave CRTC
states, so add these too to the atomic state. Since the connector atomic
state is already up-to-date when the CRTC is disabled the connector
state needs to be updated (reset) after the CRTC is disabled, make this
so. Follow the proper order of disabling first all bigjoiner slaves,
then any port synced CRTC slaves followed by the CRTC originally
requested to be disabled.
v2:
- Fix calculating the bigjoiner_masters mask in a port sync config,
(Ville)
- Keep _noatomic suffix in intel_crtc_disable_noatomic(). (Ville)
- Rebase on full CRTC state reset in this patchset, not requiring
resetting the bigjoiner state separately and (instead) resetting
the full atomic CRTC and related global state after all linked
pipes got disabled.
- Disable portsync slaves before a portsync master.
- Disable a portsync master if a linked portsync slave is disabled.
v3: (Ville)
- Use s/u32/u8 for transcoder and pipe masks.
- Use is_power_of_2() instead of hweight()==1.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230510103131.1618266-8-imre.deak@intel.com
Add i915 parameter to I915_STATE_WARN() and use device based logging.
Done using cocci + hand edited where there was no i915 local variable
ready.
v2: avoid null deref in verify_connector_state()
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512181658.1735594-1-jani.nikula@intel.com
The only way to truly clean up intel_display.[ch] is to move stuff out
of them until there's absolutely nothing left.
Start moving the high level display driver entry points, i.e. functions
called from top level driver code only, to a new file, which we'll call
intel_display_driver.c. The intention is that there's no low-level
display code or details here. This is an in-between layer.
Initially, move intel_display_driver_register() and
intel_display_driver_unregister() there.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e42cc037881a4c6042948a34bd4a9698f9e8487c.1681465222.git.jani.nikula@intel.com
Move the TC port specific fields from intel_digital_port to a new
intel_tc_port struct. Pass an intel_tc_port pointer to all static
functions in intel_tc.c keeping dig_port accessible for these via a
pointer stored in the new struct.
The next patch will allocate the intel_tc_port dynamically, allowing
moving the struct definition to intel_tc.c.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-6-imre.deak@intel.com
Move intel_crtc_update_active_timings() into intel_vblank.c
where it more properly belongs.
Also do the s/dev_priv/i915/ modernization rename while at it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230310235828.17439-3-ville.syrjala@linux.intel.com
Restructure intel_bios_port_aux_ch() to resemble the ddc_pin
counterpart, where the intel_bios.c stuff only deals with the
child device definition, and the platform default will come from
elsewhere.
This requires the introduction of AUX_CH_NONE as the value 0
is already taken to mean AUX_CH_A.
v2: Sort includes alphabetically (Ankit)
vCould we ask them to do a BIOS fix for all of them so that
we wouldn't keep getting these bug reports for each model
separately?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216231312.32664-1-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Move sanitize_watermarks() to i9xx_wm.[ch] and rename as
ilk_wm_sanitize(). The slightly unfortunate downside is having to expose
intel_atomic_check() from intel_display.c, but this declutters
intel_display.c nicely.
v2:
- Move to i9xx_wm.[ch] instead of intel_wm.[ch] (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215141910.433043-1-jani.nikula@intel.com
Move a handful of key enums to a new file intel_display_limits.h. These
are the enum types, and the MAX/NUM enumerations within them, that are
used in other headers. Otherwise, there's no common theme between them.
Replace intel_display.h include with intel_display_limit.h where
relevant, and add the intel_display.h include directly in the .c files
where needed.
Since intel_display.h is used almost everywhere in display/, include it
from intel_display_types.h to avoid massive changes across the
board. There are very few files that would need intel_display_types.h
but not intel_display.h so this is neglible, and further cleanup between
these headers can be left for the future.
Overall this change drops the direct and indirect dependencies on
intel_display.h from about 300 to about 100 compilation units, because
we can drop the include from i915_drv.h.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116164644.1752009-1-jani.nikula@intel.com
Since the color management code is the only user of the DSB
at the moment move the DSB prepare/cleanup there too. The
code has to anyway make decisions on whether to use the DSB
or not (and how to use it). Also we'll need a place where we
actually generate the DSB command buffer ahead of time rather
than the current situation where it gets generated too late
during the mmio programming of the hardware.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123152638.20622-9-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
