- Some DG2 refactor to fix DG2 bugs when operating with certain CPUs (Raag)
- Use hw support for min/interim ddb allocation for async flip (Vinod)
- More general code refactor to allow full display separation (Jani)
- Expose dsc sink max slice count via debugfs (Swati)
- Fix C10 pll programming sequence (Suraj)
- Fix DG1 power gate sequence (Rodrigo)
- Use preemption timeout on selftest cleanup (Janusz)
- DP DSC related fixes (Ankit)
- Fix HDCP compliance test (Suraj)
- Clean and Optimise mtl_ddi_prepare_link_retrain (Suraj)
- Adjust Added Wake Time with PKG_C_LATENCY (Animesh)
- Enabling uncompressed 128b/132b UHBR SST (Jani)
- Handle hdmi connector init failures, and no HDMI/DP cases (Jani)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmd9flgACgkQ+mJfZA7r
E8qSKAf9FoiRZD5dJVQ60wNEszj3Ub647+32sl2jA7jb5twoUve3ZreJvTCKUMfd
jtd+FIJtB9JLX9LwK9v8TBkkq20kAKFKvXNwLPLBsMIuQJ+1C3tkvQ6PugY/zzg0
6UGcgehlhf20lTtzqclYipophRCTl26nu7y2PkanPxRzfO62p7ygfcM38ZgqkrfK
b+GFXTB951k4aVsfNFmqbZrdpaY2E7Ybhx208cU6SfMhYvZYE6SpRc3f8zuj/w3P
ub3NFepdwg+Q2bVZuSwxX0OuWmoq06cAaAbODKzwNgjFaLxq3jXOVnZZnm7G8TVn
W85BC8RTlIStcd09Jp+tassKU+cMNA==
=r7tD
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2025-01-07' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Driver Changes:
- Some DG2 refactor to fix DG2 bugs when operating with certain CPUs (Raag)
- Use hw support for min/interim ddb allocation for async flip (Vinod)
- More general code refactor to allow full display separation (Jani)
- Expose dsc sink max slice count via debugfs (Swati)
- Fix C10 pll programming sequence (Suraj)
- Fix DG1 power gate sequence (Rodrigo)
- Use preemption timeout on selftest cleanup (Janusz)
- DP DSC related fixes (Ankit)
- Fix HDCP compliance test (Suraj)
- Clean and Optimise mtl_ddi_prepare_link_retrain (Suraj)
- Adjust Added Wake Time with PKG_C_LATENCY (Animesh)
- Enabling uncompressed 128b/132b UHBR SST (Jani)
- Handle hdmi connector init failures, and no HDMI/DP cases (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z31_WPbBoHkwgEA9@intel.com
tbt-alt mode is missing uhbr rates 10G and 20G. This requires
requires pll clock rates 312.5 MHz and 625 MHz to be added,
respectively. The uhbr rates are supported only form PTL+
platforms.
v2: Add drm_WARN_ON() to check if port clock is not supported by
the platform (Imre)
Combine forward ungate with mask parameter (Imre)
Rename XE3LPDP_* to XE3D_* (Imre)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217143440.572308-1-mika.kahola@intel.com
According to spec VDR_CUSTOM_WIDTH register gets programmed after pll
specific VDR registers and TX Lane programming registers are done.
Moreover we only program into C10_VDR_CONTROL1 to update config and
setup master lane once all VDR registers are written into.
Bspec: 67636
Fixes: 51390cc0e0 ("drm/i915/mtl: Add Support for C10 PHY message bus and pll programming")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241216181554.2861381-1-suraj.kandpal@intel.com
Add to_intel_uncore() function to avoid the inclusion of i915_drv.h from
intel_de.h. This reveals a number of implicit dependencies on i915_drv.h
that need to be added.
For now, to_intel_uncore() can be an inline function, with all the
includes in compat intel_uncore.h, as long as i915_drv.h isn't
included. The implicit dependencies on i915_drv.h is a problem in
display code, but the same is not true for xe_device.h etc.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/377e2b400d126776224fc49874ed9cb03ac3123c.1732104170.git.jani.nikula@intel.com
dig_port->saved_port_bits is used to permanently store two DDI_BUF_CTL
bits, DDI_BUF_PORT_REVERSAL and DDI_A_4_LANES. Store them separately as
bools to make their use more logical and less about storing state as
register bits.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241129102503.452272-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Use x100, or ver * 100 + rel, versions for full IP version checks,
similar to what xe driver does:
- Replace IP_VER(14, 1) inline with 1401, etc.
- Convert DISPLAY_VER_FULL() to DISPLAY_VERx100()
- Convert IS_DISPLAY_VER_FULL() to IS_DISPLAY_VERx100()
- Convert IS_DISPLAY_VER_STEP() to IS_DISPLAY_VERx100_STEP()
This makes ver.rel versions easier to use, follows the xe driver
pattern, and drops the dependency on the IP_VER() macro.
v2: Rebase, drop IP_VER() from xe compat headers
v3: Rebase
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029155536.753413-1-jani.nikula@intel.com
struct intel_display will replace struct drm_i915_private as the main
device pointer for display code. Switch Cx0 PHY code over to it.
v2: Rebase, split out the include cleanups (Rodrigo)
v3: Rebase
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029160822.800097-1-jani.nikula@intel.com
C10 phy timeouts occur on xe3lpd if the c10 bus is reset every
transaction. Although not required by BSPEC bus resets were added for
prior platforms as a workaround. Starting with xe3_lpd this bus reset is
not necessary.
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028193015.3241858-6-clinton.a.taylor@intel.com
When deciding the type of the phy, add PTL support to make
sure the correct path is taken for selection of C10 PHY.
Only port A is connected C10 PHY for Pantherlake.
Bspec: 72571
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028193015.3241858-5-clinton.a.taylor@intel.com
Read PICA register to see if edp over type C is possible and then
add the appropriate tables for it.
--v2
-remove bool from intel_encoder have it in runtime_info [Jani]
-initialize the bool in runtime_info init [Jani]
-dont abbreviate the bool [Jani]
--v3
-Remove useless display version check [Jani]
-change the warn on condition [Jani]
-no need for a different function for edp type c check [Jani]
-dont add register in i915_reg [Jani]
Bspec: 68846
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028193015.3241858-3-clinton.a.taylor@intel.com
Convert I915_STATE_WARN() to struct intel_display *, and rename to
INTEL_DISPLAY_STATE_WARN(). Do some minor opportunistic struct
drm_i915_private to struct intel_display conversions while at it.
v2: crtc_state may be NULL in intel_connector_verify_state()
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241024162510.2410128-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
There has been an update to the BSpec in which we need to set
tx_misc=0x5 field for C20 TX Context programming for HDMI TMDS for
Xe2_LPD and newer. That field is mapped to the bits 7:0 of
SRAM_GENERIC_<A/B>_TX_CNTX_CFG_1, which in turn translates to tx[1] of
our state struct. Update the algorithm to reflect this change.
v2:
- Fix Bspec reference (Sai Teja)
- Use struct intel_display instead of drm_i915_private. (Jani)
- Use the correct bit width for C20_PHY_TX_MISC_MASK. (Jani)
Bspec: 74491
Cc: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com> #v1
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023153352.144146-3-gustavo.sousa@intel.com
The variable crtc_state already contains everything that
intel_c20_compute_hdmi_tmds_pll() needs. Simplify the function's
signature by passing that struct instead of separate variables.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023153352.144146-2-gustavo.sousa@intel.com
Add condition for P2.PG power down value.
v2: change subject line to better match patch condition
Bspec: 74494
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241018200311.67324-8-matthew.s.atwood@intel.com
From DISPLAY_VER() >= 30 C20 PHY consolidated programming table of
DP and eDP been merged and now use the same rates and values. eDP
over TypeC has also been introduced.
Moreover it allows more granular and higher rates. Add new table to
represent this change.
Bspec: 68961
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241018200311.67324-5-matthew.s.atwood@intel.com
In TBT-alt mode the driver doesn't program the PHY's PLL, which is
handled instead by Thunderbolt driver/FW components, hence the PLL's HW
vs. SW state verification should be skipped. During HW readout set a flag
in the PLL state if the port was at the moment in TBT-alt mode and skip
the verification of PLL parameters in this case.
Fixes: 45fe957ae7 ("drm/i915/display: Add compare config for MTL+ platforms")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11258
Cc: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626170813.806470-1-imre.deak@intel.com
Currently, we may bump into pll mismatch errors during the
state verification stage. This happens when we try to use
fastset instead of full modeset. Hence, we would need to add
a check for pipe configuration to ensure that the sw and the
hw configuration will match. In case of hw and sw mismatch,
we would need to disable fastset and use full modeset instead.
v2: Fix C10 error on PLL comparison (BAT)
Use memcmp instead of fixed loops for pll config
comparison (Jani)
Clean up and use intel_cx0pll_dump_hw_state() to dump
pll information (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240523134649.31452-3-mika.kahola@intel.com
Tables for eDP PHY PLL configuration for different link rates added for
Xe2_HPD. Previous platforms were using C10 PHY for eDP port whereas
Xe2_HPD has C20 PHY.
v2: Updated with a more appropriate Bspec number.
Bspec: 74165
CC: Clint Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240430172850.1881525-8-radhakrishna.sripada@intel.com
Xe2_HPD has different offsets for C20 PHY SRAM configuration context
location. Use the display version to select the right address.
Note that Xe2_LPD uses the same C20 SRAM offsets used by Xe_LPDP (i.e.
MTL's display). According to the BSpec, currently, only Xe2_HPD has
different offsets, so make sure it is the only display using them in the
driver.
v2:
* Redesigned how the right offsets are selected for different display
IP versions.
v3: Fix white space error(RK)
Bspec: 67610
Cc: Clint Taylor <Clinton.A.Taylor@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240430172850.1881525-7-radhakrishna.sripada@intel.com
Xe2_HPD has a different value to power down port A.
BSpec: 65450
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240430172850.1881525-6-radhakrishna.sripada@intel.com
With HDMI monitors we bumped up a case where the crtc clock rate
caused a mismatch on state verification. This was due to
assumption that the SW clock rate from PLL structure would match
the calculated counterpart from HW. This is not necessarily always
the case and therefore we would actually need to recalculate the
clock rate from SW PLL parameters. Then these SW and HW crtc clock
rates can be compared with each other.
The patch recalculates the crtc clock rate for SW state based on
SW PLL parameters and compares the crtc clock rate calculated
from the parameters found from the HW.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502131716.504616-1-mika.kahola@intel.com
For some reason the snps/cx0 PLL states were added into
a union alongside dpll_hw_state. Just suck them into
dpll_hw_state so that we don't have so many levels of
unions/etc.
TODO: Get rid of 'clock' from the snps/cx0 PLL states
as it is not a register values and thus doesn't
belong there
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-19-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Do some renames on the register wait functions for clarity and brevity:
intel_de_wait_for_register -> intel_de_wait
intel_de_wait_for_register_fw -> intel_de_wait_fw
__intel_de_wait_for_register -> intel_de_wait_custom
In particular, it seemed odd to have a double-underscored function be
called in a number of places.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320160123.2904609-1-jani.nikula@intel.com
Add a number of encoder based functions to check if the port/phy of the
encoder is of a certain type, or to convert to phy or tc_port. Initially
these are just wrappers around the existing functions, but they can be
improved to use VBT data or use some cached info in the future.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7b2d350ee42883f2784030c649d16f983bd407bd.1710949619.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Some registers for DDI A/B moved to PICA and now follow the same format
as the ones for the PORT_TC ports. The wrapper here deals with 2 issues:
- Share the implementation between xe2lpd and previous
platforms: there are minor layout changes, it's mostly the
register location that changed
- Handle offsets after TC ports
v2:
- Explain better the trick to use just the second range (Matt Roper)
- Add missing conversions after rebase (Matt Roper)
- Use macro instead of inline function, avoiding includes in the
header (Jani)
- Prefix old macros with underscore so they don't get used by mistake,
and name the new ones using the previous names
v3: Use the same logic for the recently-introduced XELPDP_PORT_MSGBUS_TIMER
(Gustavo)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126224638.4132016-3-lucas.demarchi@intel.com
We used to select between MPLLA/B with the following
state->tx[0] & C20_PHY_USE_MPLLB
Since this is used a few places within C20 PLL setting,
let's introduce a helper function to clean up the code
a bit.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240105112243.224199-1-mika.kahola@intel.com
PLL's are not programmed in case of fastset so the state
verification compares bios programmed PLL values against
sw PLL values. To overcome this limitation, we can skip
the state verification for C10 in fastset case as the
driver is not writing PLL values.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231219123246.832245-1-mika.kahola@intel.com
The function intel_c20_use_mplla() is not really
widely used and can be replaced with the more suitable
pll->tx[0] & C20_PHY_USE_MPLLB
expression. Let's remove the intel_c20_use_mplla()
alltogether and replace mplla/mpllb selection by
checking mpllb bit.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240102115741.118525-4-mika.kahola@intel.com
We can calculate the hw port clock during the hw readout
and store it as pll_state->clock for C20 state verification.
In order to do that we need to move intel_c20pll_calc_port_clock()
function.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240102115741.118525-3-mika.kahola@intel.com
Add pll selection check for C20 as well as
clock state verification0. We have been relying
on sw state to select A or B pll's. This is incorrect
as the hw might see this selection differently. This
patch fixes this shortcoming by reading pll selection
for both sw and hw states and compares if these two
selections match.
Fixes: 59be90248b ("drm/i915/mtl: C20 state verification")
v2: reword commit message and include fix to a
original commit (Imre)
Compare pll selection (Jani)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240102115741.118525-2-mika.kahola@intel.com
With the cleanup of the misleading clock value to avoid extra
calculations to convert between link_bit_rate and clock, use
one standard "clock" field for the c20 pll which works with
crtc_state->port_clock field.
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207221025.2032207-4-radhakrishna.sripada@intel.com
The field link_bit_rate serves as the actual clock value for the C20
pll_state structure. Remove the misleading clock field. The subsequent
patch would rename the link_bit_rate as the clock field.
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207221025.2032207-3-radhakrishna.sripada@intel.com
In C20 pll_state link_bit_rate and clock fields are bit redundant. Since
many of the helpers assume the clock values, which are different from
link_bit_rate for dp2.0, convert the helpers to use the numbers that
are compatible with link_bit_rate.
Currently link_bit_rate is compatible with crtc_state->port_clock. The
function intel_c20pll_calc_port_clock returns the number which is
compatible with crtc_state->port_clock. In order to avoid extra
conversions b/ween clock and link_bit_rate, remove "clock" field from the
C20 pll_state and then rename "link_bit_rate" as "clock".
While at it rely on crtc_state->port_clock during C20 Pll programming.
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207221025.2032207-2-radhakrishna.sripada@intel.com
With TBT-ALT mode we are not programming C20 chip PLL's and
hence we don't need to check state verification. We don't
need to program DP link signal levels i.e.pre-emphasis and
voltage swing either.
This patch fixes dmesg errors like this one
"[drm] ERROR PHY F Write 0c06 failed after 3 retries."
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231129122221.1109084-1-mika.kahola@intel.com
Add state verification for C20 as we have one
for C10.
V2: Use abstractation of HW readout (Gustavo)
Drop MPLLA/B from message for TX and CMN
parameters (Gustavo)
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> (v1,v2)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231109112148.309669-1-mika.kahola@intel.com
intel_cx0_phy.[ch] should contain the details about C10/C20, not leaking
it to the rest of the driver. Start abstracting this by exporting a
single PLL hw readout that handles the differences between C20 and C10
internally to that compilation unit.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018222831.4132968-2-lucas.demarchi@intel.com
For Lunar Lake, DDI-A is connected to C10 PHY, while TC1-TC3 are connected
to C20 phy, like in Meteor Lake. Update the check in intel_is_c10phy()
accordingly.
This reverts the change in commit e388ae97e2 ("drm/i915/display:
Eliminate IS_METEORLAKE checks") that turned that into a display engine
version check. The phy <-> port connection is very SoC-specific and not
related to that version.
IS_LUNARLAKE() is defined to 0 in i915 as it's expected that the
(upcoming) xe driver is the one defining the platform, with i915 only
driving the display side.
Bspec: 70818
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026184045.1015655-2-lucas.demarchi@intel.com
Every know and then we receive the following error when running
for example IGT test kms_flip.
[drm] *ERROR* PHY G Read 0d80 failed after 3 retries.
[drm] *ERROR* PHY G Write 0d81 failed after 3 retries.
Since the error is sporadic in nature, the patch proposes
to reset the message bus after every successful or unsuccessful
read or write operation.
v2: Add FIXME's to indicate the experimental nature of
this workaround (Rodrigo)
v3: Dropping the additional delay as moving reset to *_read_once()
and *_write_once() functions seem unnecessary delay
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231016125544.719963-1-mika.kahola@intel.com
