core:
- device memory cgroup controller added
- Remove driver date from drm_driver
- Add drm_printer based hex dumper
- drm memory stats docs update
- scheduler documentation improvements
new driver:
- amdxdna - Ryzen AI NPU support
connector:
- add a mutex to protect ELD
- make connector setup two-step
panels:
- Introduce backlight quirks infrastructure
- New panels: KDB KD116N2130B12, Tianma TM070JDHG34-00,
- Multi-Inno Technology MI1010Z1T-1CP11
bridge:
- ti-sn65dsi83: Add ti,lvds-vod-swing optional properties
- Provide default implementation of atomic_check for HDMI bridges
- it605: HDCP improvements, MCCS Support
xe:
- make OA buffer size configurable
- GuC capture fixes
- add ufence and g2h flushes
- restore system memory GGTT mappings
- ioctl fixes
- SRIOV PF scheduling priority
- allow fault injection
- lots of improvements/refactors
- Enable GuC's WA_DUAL_QUEUE for newer platforms
- IRQ related fixes and improvements
i915:
- More accurate engine busyness metrics with GuC submission
- Ensure partial BO segment offset never exceeds allowed max
- Flush GuC CT receive tasklet during reset preparation
- Some DG2 refactor to fix DG2 bugs when operating with certain CPUs
- Fix DG1 power gate sequence
- Enabling uncompressed 128b/132b UHBR SST
- Handle hdmi connector init failures, and no HDMI/DP cases
- More robust engine resets on Haswell and older
i915/xe display:
- HDCP fixes for Xe3Lpd
- New GSC FW ARL-H/ARL-U
- support 3 VDSC engines 12 slices
- MBUS joining sanitisation
- reconcile i915/xe display power mgmt
- Xe3Lpd fixes
- UHBR rates for Thunderbolt
amdgpu:
- DRM panic support
- track BO memory stats at runtime
- Fix max surface handling in DC
- Cleaner shader support for gfx10.3 dGPUs
- fix drm buddy trim handling
- SDMA engine reset updates
- Fix doorbell ttm cleanup
- RAS updates
- ISP updates
- SDMA queue reset support
- Rework DPM powergating interfaces
- Documentation updates and cleanups
- DCN 3.5 updates
- Use a pm notifier to more gracefully handle VRAM eviction on suspend or hibernate
- Add debugfs interfaces for forcing scheduling to specific engine instances
- GG 9.5 updates
- IH 4.4 updates
- Make missing optional firmware less noisy
- PSP 13.x updates
- SMU 13.x updates
- VCN 5.x updates
- JPEG 5.x updates
- GC 12.x updates
- DC FAMS updates
amdkfd:
- GG 9.5 updates
- Logging improvements
- Shader debugger fixes
- Trap handler cleanup
- Cleanup includes
- Eviction fence wq fix
msm:
- MDSS:
- properly described UBWC registers
- added SM6150 (aka QCS615) support
- DPU:
- added SM6150 (aka QCS615) support
- enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane)
- added CWB hardware blocks support
- DSI:
- added SM6150 (aka QCS615) support
- GPU:
- Print GMU core fw version
- GMU bandwidth voting for a740 and a750
- Expose uche trap base via uapi
- UAPI error reporting
rcar-du:
- Add r8a779h0 Support
ivpu:
- Fix qemu crash when using passthrough
nouveau:
- expose GSP-RM logging buffers via debugfs
panfrost:
- Add MT8188 Mali-G57 MC3 support
rockchip:
- Gamma LUT support
hisilicon:
- new HIBMC support
virtio-gpu:
- convert to helpers
- add prime support for scanout buffers
v3d:
- Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL
vc4:
- Add support for BCM2712
vkms:
- line-per-line compositing algorithm to improve performance
zynqmp:
- Add DP audio support
mediatek:
- dp: Add sdp path reset
- dp: Support flexible length of DP calibration data
etnaviv:
- add fdinfo memory support
- add explicit reset handling
-----BEGIN PGP SIGNATURE-----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=5FIc
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"There are two external interactions of note, the msm tree pull in some
opp tree, hopefully the opp tree arrives from the same git tree
however it normally does.
There is also a new cgroup controller for device memory, that is used
by drm, so is merging through my tree. This will hopefully help open
up gpu cgroup usage a bit more and move us forward.
There is a new accelerator driver for the AMD XDNA Ryzen AI NPUs.
Then the usual xe/amdgpu/i915/msm leaders and lots of changes and
refactors across the board:
core:
- device memory cgroup controller added
- Remove driver date from drm_driver
- Add drm_printer based hex dumper
- drm memory stats docs update
- scheduler documentation improvements
new driver:
- amdxdna - Ryzen AI NPU support
connector:
- add a mutex to protect ELD
- make connector setup two-step
panels:
- Introduce backlight quirks infrastructure
- New panels: KDB KD116N2130B12, Tianma TM070JDHG34-00,
- Multi-Inno Technology MI1010Z1T-1CP11
bridge:
- ti-sn65dsi83: Add ti,lvds-vod-swing optional properties
- Provide default implementation of atomic_check for HDMI bridges
- it605: HDCP improvements, MCCS Support
xe:
- make OA buffer size configurable
- GuC capture fixes
- add ufence and g2h flushes
- restore system memory GGTT mappings
- ioctl fixes
- SRIOV PF scheduling priority
- allow fault injection
- lots of improvements/refactors
- Enable GuC's WA_DUAL_QUEUE for newer platforms
- IRQ related fixes and improvements
i915:
- More accurate engine busyness metrics with GuC submission
- Ensure partial BO segment offset never exceeds allowed max
- Flush GuC CT receive tasklet during reset preparation
- Some DG2 refactor to fix DG2 bugs when operating with certain CPUs
- Fix DG1 power gate sequence
- Enabling uncompressed 128b/132b UHBR SST
- Handle hdmi connector init failures, and no HDMI/DP cases
- More robust engine resets on Haswell and older
i915/xe display:
- HDCP fixes for Xe3Lpd
- New GSC FW ARL-H/ARL-U
- support 3 VDSC engines 12 slices
- MBUS joining sanitisation
- reconcile i915/xe display power mgmt
- Xe3Lpd fixes
- UHBR rates for Thunderbolt
amdgpu:
- DRM panic support
- track BO memory stats at runtime
- Fix max surface handling in DC
- Cleaner shader support for gfx10.3 dGPUs
- fix drm buddy trim handling
- SDMA engine reset updates
- Fix doorbell ttm cleanup
- RAS updates
- ISP updates
- SDMA queue reset support
- Rework DPM powergating interfaces
- Documentation updates and cleanups
- DCN 3.5 updates
- Use a pm notifier to more gracefully handle VRAM eviction on
suspend or hibernate
- Add debugfs interfaces for forcing scheduling to specific engine
instances
- GG 9.5 updates
- IH 4.4 updates
- Make missing optional firmware less noisy
- PSP 13.x updates
- SMU 13.x updates
- VCN 5.x updates
- JPEG 5.x updates
- GC 12.x updates
- DC FAMS updates
amdkfd:
- GG 9.5 updates
- Logging improvements
- Shader debugger fixes
- Trap handler cleanup
- Cleanup includes
- Eviction fence wq fix
msm:
- MDSS:
- properly described UBWC registers
- added SM6150 (aka QCS615) support
- DPU:
- added SM6150 (aka QCS615) support
- enabled wide planes if virtual planes are enabled (by using two
SSPPs for a single plane)
- added CWB hardware blocks support
- DSI:
- added SM6150 (aka QCS615) support
- GPU:
- Print GMU core fw version
- GMU bandwidth voting for a740 and a750
- Expose uche trap base via uapi
- UAPI error reporting
rcar-du:
- Add r8a779h0 Support
ivpu:
- Fix qemu crash when using passthrough
nouveau:
- expose GSP-RM logging buffers via debugfs
panfrost:
- Add MT8188 Mali-G57 MC3 support
rockchip:
- Gamma LUT support
hisilicon:
- new HIBMC support
virtio-gpu:
- convert to helpers
- add prime support for scanout buffers
v3d:
- Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL
vc4:
- Add support for BCM2712
vkms:
- line-per-line compositing algorithm to improve performance
zynqmp:
- Add DP audio support
mediatek:
- dp: Add sdp path reset
- dp: Support flexible length of DP calibration data
etnaviv:
- add fdinfo memory support
- add explicit reset handling"
* tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel: (1070 commits)
drm/bridge: fix documentation for the hdmi_audio_prepare() callback
doc/cgroup: Fix title underline length
drm/doc: Include new drm-compute documentation
cgroup/dmem: Fix parameters documentation
cgroup/dmem: Select PAGE_COUNTER
kernel/cgroup: Remove the unused variable climit
drm/display: hdmi: Do not read EDID on disconnected connectors
drm/tests: hdmi: Add connector disablement test
drm/connector: hdmi: Do atomic check when necessary
drm/amd/display: 3.2.316
drm/amd/display: avoid reset DTBCLK at clock init
drm/amd/display: improve dpia pre-train
drm/amd/display: Apply DML21 Patches
drm/amd/display: Use HW lock mgr for PSR1
drm/amd/display: Revised for Replay Pseudo vblank control
drm/amd/display: Add a new flag for replay low hz
drm/amd/display: Remove unused read_ono_state function from Hwss module
drm/amd/display: Do not elevate mem_type change to full update
drm/amd/display: Do not wait for PSR disable on vbl enable
drm/amd/display: Remove unnecessary eDP power down
...
If devm_i2c_new_dummy_device() fails then we were supposed to return an
error code, but instead the function continues and will crash on the next
line. Add the missing return statement.
Fixes: 0497236287 ("drm/bridge: Add ITE IT6263 LVDS to HDMI converter")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/804a758b-f2e7-4116-b72d-29bc8905beed@stanley.mountain
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmd7BBQeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGfEEH/3oyTWmD5DPX2lLp
SujyKrEs6bfMQTKKYHzuy8OvzDXkBpZiKXIsCgjF5sXwQVgB7KPfJwgjt5xLo3F3
NTehLGwII7bM8mSq3wHDMeNkyBle4VYA9XOR8tXj21j7aRt9S4U/vtXiYeD9BWhC
Y1p+1FXKfZf7TjNpu8lIl+zLjSFDjYwM8h72dIuHnrYeuFL88fnWwoNP/MFkk5Kk
ce3ol3EtFe/M4GbVOm7KfzEkbsEE6ES60O0suxwYDn+71EA6ExVHFBKqpQvfj71/
ynxWYIwMoiCZWtJ+ali1g/ms0OxG+ivH8+xasBYTcDICZMe/XGX5Yx+Wm5DH5/Ev
pGMyvbI=
=yrc7
-----END PGP SIGNATURE-----
Merge tag 'v6.13-rc6' into drm-next
This backmerges Linux 6.13-rc6 this is need for the newer pulls.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Make the Lontium LT9611 DSI-to-HDMI bridge driver use the DRM HDMI Codec
framework. This enables programming of Audio InfoFrames using the HDMI
Connector interface and also enables support for the missing features,
including the ELD retrieval and better hotplug support.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-5-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The no_capture_mute flag might differ from platform to platform,
especially in the case of the wrapping implementations, like the
upcoming DRM HDMI Codec framework. Move the flag next to all other flags
in struct hdmi_codec_pdata.
Acked-by: Mark Brown <broonie@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-2-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The upcoming DRM connector HDMI codec implementation is going to use
codec-specific data in the .get_dai_id to get drm_connector. Pass data
to the callback, as it is done with other hdmi_codec_ops callbacks.
Acked-by: Mark Brown <broonie@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-1-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
DisplayPort AUX protocol supports I2C transport which is capable of
reading EDID or supports MCCS.
In drm_dp_helper, drm_dp_i2c_xfer() packs I2C requests into a
sequence of AUX requests.
it6505_aux_i2c_operation() is implemented to match drm_dp_i2c_xfer()
operactions.
it6505_aux_i2c_transfer() adds I2C functionality
for it6505_aux_transfer().
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-10-e0fdd4844703@ite.corp-partner.google.com
HDCP must disabled encryption and restart authentication after
waiting KSV for 5s.
The original method uses a counter in a waitting loop that may
wait much longer than it is supposed to.
Use time_after() for KSV wait timeout.
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-9-e0fdd4844703@ite.corp-partner.google.com
When running the HDCP CTS test with UNIGRAF DPR-100.
KSV list must be read from DP_AUX_HDCP_KSV_FIFO in an AUX request,
and can not separate with multiple read requests.
The AUX operation command "CMD_AUX_GET_KSV_LIST" reads the KSV list
with AUX FIFO and is able to read DP_AUX_HDCP_KSV_FIFO in an AUX request.
Add it6505_get_ksvlist() which uses CMD_AUX_GET_KSV_LIST operation
to read the KSV list.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-7-e0fdd4844703@ite.corp-partner.google.com
When starting HDCP authentication, HDCP encryption should be enabled
when R0'is checked.
Change encryption enables time at R0' ready.
The hardware HDCP engine trigger is changed and the repeater KSV fails
will restart HDCP.
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-6-e0fdd4844703@ite.corp-partner.google.com
When HDCP is activated,
a DisplayPort source receiving CP_IRQ from the sink
shall check Bstatus from DPCD and process the corresponding value
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-5-e0fdd4844703@ite.corp-partner.google.com
A HDCP source device shall support max downstream to 127 devices.
Change definition MAX_HDCP_DOWN_STREAM_COUNT to 127
KSVs shall save for DRM blocked devices check.
This results in struct it6505 growth by ~0.5 KiB.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-4-e0fdd4844703@ite.corp-partner.google.com
HDCP KSV list readback can choose to use AUX FIFO or
general data register.
For some DisplayPort devices, the KSV list must be read
in 5 byte boundaries.
The original AUX read command does not support these devices.
The AUX command operation control register "REG_AUX_CMD_REQ" uses b[3:0]
as AUX operacion control, and b[7:4] are status bits and read only.
To change KSV read operation uses "CMD_AUX_NATIVE_READ" from using
the data registers to using AUX FIFO.
The extended command "CMD_AUX_GET_KSV_LIST" is added as
"CMD_AUX_NATIVE_READ" with the 0x10 flag which selects AUX FIFO mode.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-3-e0fdd4844703@ite.corp-partner.google.com
The original AUX operation using data registers is limited to 4 bytes.
The AUX operation command CMD_AUX_I2C_EDID_READ uses AUX FIFO and
is capable of reading 16 bytes.
This improves the speed of EDID read.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-2-e0fdd4844703@ite.corp-partner.google.com
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104190636.274926-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
As drm_bridge_connector now provides atomic_check() implementation which
calls drm_atomic_helper_connector_hdmi_check(), drop the duplicating
callback from the bridge driver.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210-bridge_hdmi_check-v1-2-a8fdd8c5afa5@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
When user enabled HDCP feature, userspace will set HDCP content
to DRM_MODE_CONTENT_PROTECTION_DESIRED. Next, anx7625 will update
HDCP content to DRM_MODE_CONTENT_PROTECTION_ENABLED if down stream
support HDCP feature.
As anx7625 bridge IC will be power down after call .atomic_disable(),
then all HDCP status will be lost on chip. So we should reestablish
HDCP again in .atomic_enable(), and update hdcp content to DESIRE if
current HDCP content is ENABLE in .atomic_disable().
v4:
- Change HDCP content value to DESIRED if HDCP status is ENABLE in bridge
interface .atomic_enable().
v3:
- Move hdcp content value checking from bridge interface
.atomic_check() to .atomic_enable()
v2:
- Add more details in commit message
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Tested-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241219070330.224996-1-xji@analogixsemi.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219070330.224996-1-xji@analogixsemi.com
The host_node pointer was assigned and freed in adv7533_parse_dt(), and
later, adv7533_attach_dsi() uses the same. Fix this use-after-free issue
by dropping of_node_put() in adv7533_parse_dt() and calling of_node_put()
in error path of probe() and also in the remove().
Fixes: 1e4d58cd7f ("drm/bridge: adv7533: Create a MIPI DSI device")
Cc: stable@vger.kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241119192040.152657-2-biju.das.jz@bp.renesas.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
AUDIO_UPDATE bit (Bit 5 of MAIN register 0x4A) needs to be set to 1
while updating Audio InfoFrame information and then set to 0 when done.
Otherwise partially updated Audio InfoFrames could be sent out. Two
cases where this rule were not followed are fixed:
- In adv7511_hdmi_hw_params() make sure AUDIO_UPDATE bit is updated
before/after setting ADV7511_REG_AUDIO_INFOFRAME.
- In audio_startup() use the correct register for clearing
AUDIO_UPDATE bit.
The problem with corrupted audio infoframes were discovered by letting
a HDMI logic analyser check the output of ADV7535.
Note that this patchs replaces writing REG_GC(1) with
REG_INFOFRAME_UPDATE. Bit 5 of REG_GC(1) is positioned within field
GC_PP[3:0] and that field doesn't control audio infoframe and is read-
only. My conclusion therefore was that the author if this code meant to
clear bit 5 of REG_INFOFRAME_UPDATE from the very beginning.
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Fixes: 53c515befe ("drm/bridge: adv7511: Add Audio support")
Signed-off-by: Stefan Ekenberg <stefan.ekenberg@axis.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241119-adv7511-audio-info-frame-v4-1-4ae68e76c89c@axis.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add a optional properties to change LVDS output voltage. This should not
be static as this depends mainly on the connected display voltage
requirement. We have three properties:
- "ti,lvds-termination-ohms", which sets near end termination,
- "ti,lvds-vod-swing-data-microvolt" and
- "ti,lvds-vod-swing-clock-microvolt" which both set LVDS differential
output voltage for data and clock lanes. They are defined as an array
with min and max values. The appropriate bitfield will be set if
selected constraints can be met.
If "ti,lvds-termination-ohms" is not defined the default of 200 Ohm near
end termination will be used. Selecting only one:
"ti,lvds-vod-swing-data-microvolt" or
"ti,lvds-vod-swing-clock-microvolt" can be done, but the output voltage
constraint for only data/clock lanes will be met. Setting both is
recommended.
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241216085410.1968634-3-andrej.picej@norik.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241216085410.1968634-3-andrej.picej@norik.com
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
While add it, also remove commas after the sentinel entries.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Liu Ying <victor.liu@nxp.com> # ite-it6263.c
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204105827.1682632-2-u.kleine-koenig@baylibre.com
Add a Synopsys Designware MIPI DSI host DRM bridge driver for their
DSI2 host controller, based on the Rockchip version from the driver
rockchip/dw-mipi-dsi2.c in their vendor-kernel with phy & bridge APIs.
While the driver is heavily modelled after the previous IP, the register
set of this DSI2 controller is completely different and there are also
additional properties like the variable-width phy interface.
Tested-by: Daniel Semkowicz <dse@thaumatec.com>
Tested-by: Dmitry Yashin <dmt.yashin@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241209231021.2180582-2-heiko@sntech.de
Introduce it6263_is_input_bus_fmt_valid() and refactor the
it6263_bridge_atomic_get_input_bus_fmts() function to support VESA-24
format by selecting the LVDS input format based on the LVDS data mapping
and thereby support both JEIDA-24 and VESA-24 input formats.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241205080210.1285385-1-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The v6.13-rc2 release included a bunch of breaking changes,
specifically the MODULE_IMPORT_NS commit.
Backmerge in order to fix them before the next pull-request.
Include the fix from Stephen Roswell.
Caused by commit
25c3fd1183 ("drm/virtio: Add a helper to map and note the dma addrs and lengths")
Interacting with commit
cdd30ebb1b ("module: Convert symbol namespace to string literal")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20241209121717.2abe8026@canb.auug.org.au
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Replace .mode_valid() callback with .hdmi_tmds_char_rate_valid(). It is
more generic and is used in other mode validation paths. The rate
validation for .mode_valid() will be performed by the
drm_bridge_connector code.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241130-hdmi-mode-valid-v5-9-742644ec3b1f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
core:
- split DSC helpers from DP helpers
- clang build fixes for drm/mm test
- drop simple pipeline support for gem vram
- document submission error signaling
- move drm_rect to drm core module from kms helper
- add default client setup to most drivers
- move to video aperture helpers instead of drm ones
tests:
- new framebuffer tests
ttm:
- remove swapped and pinned BOs from TTM lru
panic:
- fix uninit spinlock
- add ABGR2101010 support
bridge:
- add TI TDP158 support
- use standard PM OPS
dma-fence:
- use read_trylock instead of read_lock to help lockdep
scheduler:
- add errno to sched start to report different errors
- add locking to drm_sched_entity_modify_sched
- improve documentation
xe:
- add drm_line_printer
- lots of refactoring
- Enable Xe2 + PES disaggregation
- add new ARL PCI ID
- SRIOV development work
- fix exec unnecessary implicit fence
- define and parse OA sync props
- forcewake refactoring
i915:
- Enable BMG/LNL ultra joiner
- Enable 10bpx + CCS scanout on ICL+, fp16/CCS on TGL+
- use DSB for plane/color mgmt
- Arrow lake PCI IDs
- lots of i915/xe display refactoring
- enable PXP GuC autoteardown
- Pantherlake (PTL) Xe3 LPD display enablement
- Allow fastset HDR infoframe changes
- write DP source OUI for non-eDP sinks
- share PCI IDs between i915 and xe
amdgpu:
- SDMA queue reset support
- SMU 13.0.6, JPEG 4.0.3 updates
- Initial runtime repartitioning support
- rework IP structs for multiple IP instances
- Fetch EDID from _DDC if available
- SMU13 zero rpm user control
- lots of fixes/cleanups
amdkfd:
- Increase event FIFO size
- add topology cap flag for per queue reset
msm:
- DPU:
- SA8775P support
- (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996 support
- Enable large framebuffer support
- Drop MSM8998 and SDM845
- DP:
- SA8775P support
- GPU:
- a7xx preemption support
- Adreno A663 support
ast:
- warn about unsupported TX chips
ivpu:
- add coredump
- add pantherlake support
rockchip:
- 4K@60Hz display enablement
- generate pll programming tables
panthor:
- add timestamp query API
- add realtime group priority
- add fdinfo support
etnaviv:
- improve handling of DMA address limits
- improve GPU hangcheck
exynos:
- Decon Exynos7870 support
mediatek:
- add OF graph support
omap:
- locking fixes
bochs:
- convert to gem/shmem from simpledrm
v3d:
- support big/super pages
- add gemfs
vc4:
- BCM2712 support refactoring
- add YUV444 format support
udmabuf:
- folio related fixes
nouveau:
- add panic support on nv50+
-----BEGIN PGP SIGNATURE-----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=8cUI
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-11-21' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"There's a lot of rework, the panic helper support is being added to
more drivers, v3d gets support for HW superpages, scheduler
documentation, drm client and video aperture reworks, some new
MAINTAINERS added, amdgpu has the usual lots of IP refactors, Intel
has some Pantherlake enablement and xe is getting some SRIOV bits, but
just lots of stuff everywhere.
core:
- split DSC helpers from DP helpers
- clang build fixes for drm/mm test
- drop simple pipeline support for gem vram
- document submission error signaling
- move drm_rect to drm core module from kms helper
- add default client setup to most drivers
- move to video aperture helpers instead of drm ones
tests:
- new framebuffer tests
ttm:
- remove swapped and pinned BOs from TTM lru
panic:
- fix uninit spinlock
- add ABGR2101010 support
bridge:
- add TI TDP158 support
- use standard PM OPS
dma-fence:
- use read_trylock instead of read_lock to help lockdep
scheduler:
- add errno to sched start to report different errors
- add locking to drm_sched_entity_modify_sched
- improve documentation
xe:
- add drm_line_printer
- lots of refactoring
- Enable Xe2 + PES disaggregation
- add new ARL PCI ID
- SRIOV development work
- fix exec unnecessary implicit fence
- define and parse OA sync props
- forcewake refactoring
i915:
- Enable BMG/LNL ultra joiner
- Enable 10bpx + CCS scanout on ICL+, fp16/CCS on TGL+
- use DSB for plane/color mgmt
- Arrow lake PCI IDs
- lots of i915/xe display refactoring
- enable PXP GuC autoteardown
- Pantherlake (PTL) Xe3 LPD display enablement
- Allow fastset HDR infoframe changes
- write DP source OUI for non-eDP sinks
- share PCI IDs between i915 and xe
amdgpu:
- SDMA queue reset support
- SMU 13.0.6, JPEG 4.0.3 updates
- Initial runtime repartitioning support
- rework IP structs for multiple IP instances
- Fetch EDID from _DDC if available
- SMU13 zero rpm user control
- lots of fixes/cleanups
amdkfd:
- Increase event FIFO size
- add topology cap flag for per queue reset
msm:
- DPU:
- SA8775P support
- (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996 support
- Enable large framebuffer support
- Drop MSM8998 and SDM845
- DP:
- SA8775P support
- GPU:
- a7xx preemption support
- Adreno A663 support
ast:
- warn about unsupported TX chips
ivpu:
- add coredump
- add pantherlake support
rockchip:
- 4K@60Hz display enablement
- generate pll programming tables
panthor:
- add timestamp query API
- add realtime group priority
- add fdinfo support
etnaviv:
- improve handling of DMA address limits
- improve GPU hangcheck
exynos:
- Decon Exynos7870 support
mediatek:
- add OF graph support
omap:
- locking fixes
bochs:
- convert to gem/shmem from simpledrm
v3d:
- support big/super pages
- add gemfs
vc4:
- BCM2712 support refactoring
- add YUV444 format support
udmabuf:
- folio related fixes
nouveau:
- add panic support on nv50+"
* tag 'drm-next-2024-11-21' of https://gitlab.freedesktop.org/drm/kernel: (1583 commits)
drm/xe/guc: Fix dereference before NULL check
drm/amd: Fix initialization mistake for NBIO 7.7.0
Revert "drm/amd/display: parse umc_info or vram_info based on ASIC"
drm/amd/display: Fix failure to read vram info due to static BP_RESULT
drm/amdgpu: enable GTT fallback handling for dGPUs only
drm/amd/amdgpu: limit single process inside MES
drm/fourcc: add AMD_FMT_MOD_TILE_GFX9_4K_D_X
drm/amdgpu/mes12: correct kiq unmap latency
drm/amdgpu: Support vcn and jpeg error info parsing
drm/amd : Update MES API header file for v11 & v12
drm/amd/amdkfd: add/remove kfd queues on start/stop KFD scheduling
drm/amdkfd: change kfd process kref count at creation
drm/amdgpu: Cleanup shift coding style
drm/amd/amdgpu: Increase MES log buffer to dump mes scratch data
drm/amdgpu: Implement virt req_ras_err_count
drm/amdgpu: VF Query RAS Caps from Host if supported
drm/amdgpu: Add msg handlers for SRIOV RAS Telemetry
drm/amdgpu: Update SRIOV Exchange Headers for RAS Telemetry Support
drm/amd/display: 3.2.309
drm/amd/display: Adjust VSDB parser for replay feature
...
'struct i2c_device_id' is not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
15566 987 32 16585 40c9 drivers/gpu/drm/bridge/chipone-icn6211.o
After:
=====
text data bss dec hex filename
15630 923 32 16585 40c9 drivers/gpu/drm/bridge/chipone-icn6211.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/bdba1f49b4b48e22628482b49ce81f8e1f0d97b1.1731445901.git.christophe.jaillet@wanadoo.fr
cdns_mhdp_hdcp_set_lc() and cdns_mhdp_hdcp_set_public_key_param()
were added by commit
6a3608eae6 ("drm: bridge: cdns-mhdp8546: Enable HDCP")
but never used.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241005232017.305217-1-linux@treblig.org
Add basic HDMI video output support. Currently, only RGB888 output
pixel format is supported. At the LVDS input side, the driver
supports single LVDS link and dual LVDS links with "jeida-24" LVDS
mapping.
Product link:
https://www.ite.com.tw/en/product/cate1/IT6263
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104032806.611890-11-victor.liu@nxp.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Didn't notice drm/drm-next had the build fix for drm_bridge, so ended up
committing the same patch. Sync with drm and pretend it didn't happen?
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
The IT6505 bridge chip has a active low reset line. Since it is a
"reset" and not an "enable" line, the GPIO should be asserted to
put it in reset and deasserted to bring it out of reset during
the power on sequence.
The polarity was inverted when the driver was first introduced, likely
because the device family that was targeted had an inverting level
shifter on the reset line.
The MT8186 Corsola devices already have the IT6505 in their device tree,
but the whole display pipeline is actually disabled and won't be enabled
until some remaining issues are sorted out. The other known user is
the MT8183 Kukui / Jacuzzi family; their device trees currently do not
have the IT6505 included.
Fix the polarity in the driver while there are no actual users.
Fixes: b5c84a9edc ("drm/bridge: add it6505 driver")
Cc: stable@vger.kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029095411.657616-1-wenst@chromium.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
The driver configures mostly Pixel PLL from the clock cached in
local copy of the mode. Make sure the driver uses adjusted mode
which contains the updated Pixel PLL settings negotiated in
tc_dpi_atomic_check()/tc_edp_atomic_check().
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241026041057.247640-1-marex@denx.de
Set the drm_bridge's ycbcr_420_allowed flag if the YCbCr 420 output is
supported by the hardware.
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241019-bridge-yuv420-v1-6-d74efac9e4e6@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
As both aux bridges are merely passthrough bridges, mark them as
supporting interlaced and YCbCr 420 data. Other bridges in the chain
still might limit interlaced and YCbCr 420 data support on the
corresponding connector.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241019-bridge-yuv420-v1-4-d74efac9e4e6@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
