After a connector is added to the drm_mode_config::connector_list, it's
visible to any in-kernel users looking up connectors via the above list.
Make sure that the connector is properly initialized before such
look-ups, by initializing the connector with
drm_connector_dynamic_init() - which doesn't add the connector to the
list - and registering it with drm_connector_dynamic_register() - which
adds the connector to the list - after the initialization is complete.
v2: Fix s/drm_connector_dynamic_register()/drm_connector_dynamic_init()
typo in the commit log.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Wayne Lin <wayne.lin@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211230328.4012496-7-imre.deak@intel.com
Reading access to connector->eld can happen at the same time the
drm_edid_to_eld() updates the data. Take the newly added eld_mutex in
order to protect connector->eld from concurrent access.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241206-drm-connector-eld-mutex-v2-4-c9bce1ee8bea@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
dcn_find_dcfclk_suits_all() last use was removed by 2018's
commit 4fd994c448 ("drm/amd/display: Start using the new pp_smu
interface")
Remove it, and the dcn_find_normalized_clock_vdd_Level helper it used.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mmhubbub_warmup is a field that was only read by the just removed
dc_stream_warmup_writeback() function.
Remove the field and it's initialisers.
It was only ever initialised to a single function value
(dcn30_mmhubbub_warmup) which is called explicitly elsewhere.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dc_stream_warmup_writeback() is unused since it was added in 2019 by
commit 6a652f6d12 ("drm/amd/display: Add warmup escape call support")
Remove it.
Note there is a dcn30 version that's called directly which is kept.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dwb3_set_host_read_rate_control() has been unused since it was added by
commit 8993dee0de ("drm/amd/display: Add DCN3 DWB")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable_surface_flip_reporting() has been unused since it was added by
commit 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They were named with the incorrect dcn version.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Sun peng Li <sunpeng.li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* Fix some regressions related to IPS2 and PSR Panel Replay
* Bug fixes in DML
* DMCUB debug improvements
* Other refactors and improvements across multiple components
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
The force_ffu_mode flag could be initialized at other place.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Zhongwei <Zhongwei.Zhang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 8488646966.
In some test environments causes reporting failures for S0i3/S4.
It shouldn't actually block entry provided there's no race with the
last state being updated, but currently suspecting there's an IPS2
check that's no longer being met.
Fixes: 8488646966 ("drm/amd/display: Don't allow IPS2 in D0 for RCG Dynamic")
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 0f5ac8c8e2
Due to a replay regression.
Fixes: 0f5ac8c8e2 ("drm/amd/display: Revised for Replay Pseudo vblank control")
Reviewed-by: Dennis Chan <dennis.chan@amd.com>
Signed-off-by: Gabe Teeger <Gabe.Teeger@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DMColor inaccurately updates color space, bias and scale
destructively in dc_plane_state. This can be resolved by
accurately populating the infos on dc_plane_info where then
translation to plane state can happen as a whole surface update sequence.
[How]
Remove dc_plane_state update in DMColor and update color space,
bias and scale on dc_plane_info.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When using upscaling on certain gpus, some incorrect scaling
calculations would be made causing hangs.
[HOW]
This was fixed by using the resource_build_scaling_params function on these
gpus.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Peterson Guo <peterson.guo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Right now in dml2 mode validation we are calculating UBF parameters for
prefetch calculation for single and dual DPP scenarios. Data structure
to store such values are just 1D arrays, the single DPP values are
overwritten by the dualDPP values, and we end up using dualDPP for
prefetch calculations twice (once in place of singleDPP support check
and again for dual).
This naturally leads to many problems, one of which validating a mode in
"singleDPP" (when we used dual DPP parameters) and sending the singleDPP
parameters to mode programming, if we cannot support then we observe the
corruption as described in the ticket.
[HOW]
UBF values need to have 2d arrays to store values specific to single and
dual DPP states to avoid single DPP values being overwritten. Other
parameters are recorded on a per state basis such as prefetch UBF values
but they are in the same loop used for calculation and at that point its
fine to overwrite them, its not the case for plain UBF values.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previously, the debugfs did a simple dump of the tracebuffer region.
Because the tracebuffer is a ring, it meant that the entries printed may
not be in chronological order if the ring rolled over. This makes
parsing the tracelog cumbersome.
[How]
Since dmcub provides the current entry count, use that to determine
the latest tracelog entry and output the log chronologically.
Also, the fb region size is not accurate of the actual tracebuffer size;
it has been padded to alignment requirements. Use the tracebuffer size
reported by the fw meta_info, if available. If not, a fallback to the
hardcoded default is needed. To make this value available to other .c
files, its define was moved to dmub_srv.h.
Also, print a indicator at the start of the log if rollover occurred.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add check for invalid pixel format, remove unused pixel formats
and clean up some names
Reviewed-by: Navid Assadian <navid.assadian@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Mismatch between mode support and mode programming occurs.
Mode support would calculate higher row vblank than mode programming.
As a result, mode programming fails and hardware isn't properly programmed.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Variables relates to secure display are spreading out within struct
amdgpu_display_manager.
[How]
Encapsulate relevant variables into struct secure_display_context and
adjust relevant affected codes.
Reviewed-by: HaoPing Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Under mst scenario, mst streams are from the same link_enc_hw_inst.
As the result, can't utilize that as the phy index for distinguising
different stream sinks.
[How]
Sort the connectors by:
link_enc_hw_instance->mst tree depth->mst RAD
After sorting the phy index assignment, store connector's relevant info
into dm mapping array. Once need the index, just look up the static
array.
Reviewed-by: HaoPing Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For mst streams under same topology, stream->link->link_enc_hw_inst are the same and
hence can't distinguish the crc window setting.
[How]
Firstly adjust dc_stream_forward_crc_window to accept assignment of phy_id. Follow up
another patch to determine the phy_id at dm layer.
Reviewed-by: HaoPing Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to avoid unnecessary asserts, one of which is hit in
dcn31_panel_construct when booting on a DCN32 asic that has an eDP
connector on a different DIG than A or B. The DIG-based mapping only
applies when edp0_on_dp1 is supported, therefore the check for valid
eng_id can be moved within the appropriate section of the if statement.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Expose DCN401 HUBP functions for use across other platforms.
[Description]
This change aims to make the DCN401 HUBP functions accessible for
enabling their use in future platform developments.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[HOW&WHY]
Stores DMUB support for enablement of Varibright over VABC in DCN32
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Iswara Nagulendran <iswara.nagulendran@amd.com>
Signed-off-by: Harry VanZyllDeJong <hvanzyll@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some of the firmware that is loaded by amdgpu is not actually required.
For example the ISP firmware on some SoCs is optional, and if it's not
present the ISP IP block just won't be initialized.
The firmware loader core however will show a warning when this happens
like this:
```
Direct firmware load for amdgpu/isp_4_1_0.bin failed with error -2
```
To avoid confusion for non-required firmware, adjust the amd-ucode helper
to take an extra argument indicating if the firmware is required or
optional.
On optional firmware use firmware_request_nowarn() instead of
request_firmware() to avoid the warnings.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/amd-gfx/df71d375-7abd-4b32-97ce-15e57846eed8@amd.com/T/#t
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
v and h tap calculations slightly different
Use h tap calculation for both v and h tap
Reviewed-by: Navid Assadian <navid.assadian@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move DP tunneling field DPCD reading after all other RX caps are read.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Cruise <Cruise.Hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When using a sw cursor and flip immediate, the plane that is flipping
immediately will do partial updates causing tearing.
When on certain displays, subvp is expected based on
timings but should be disabled in specific use cases that are not
accounted for.
[HOW]
This was fixed by improving the timings check by using the hw cursor
required flag to cover the unaccounted use cases.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Peterson <peterson.guo@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The existing changes to the DPMS off flag should help reduce
accidental entry, but this change further restricts the entry condition.
[How]
Record last power state as sent to DMUB.
Don't send IPS2 allow if it's D0.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Soft hang/lag observed during 10bit playback + moving cursor, corruption
observed in other tickets for same reason, also failing MPO.
1. Currently, we are always running
calculate_lowest_supported_state_for_temp_read which is only
necessary on dGPU
2. Fast validate path does not apply DET buffer allocation policy
3. Prefetch UrgBFactor chroma parameter not populated in prefetch
calculation
[HOW]
1. Add a check to see if we are on APU, if so, skip the code
2. Add det buffer alloc policy checks to fast validate path
3. Populate UrgentBurstChroma param in call to calculate
UrgBChroma prefetch values
-revision commits: small formatting/brackets/null check addition + remove test change + dGPU code
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
driver got wrong clock table due to miss match dtm_table headers.
correct the dtn_clock table based on pmfw header.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Add hblank borrowing support
- Limit VTotal range to max hw cap minus fp
- Correct prefetch calculation
- Add option to retrieve detile buffer size
- Add support for custom recout_width in SPL
- Add disable_ips_in_dpms_off flag for IPS
- Enable EASF based on luma taps only
- Add a left edge pixel if in YCbCr422 or YCbCr420 and odm
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Add support for custom recout_width for mpc combine in SPL
[HOW]
1. Rename mpc_combine_h and mpc_combine_v
2. Add flag use_recout_width_aligned to use custom recout_width
3. Create union to use either mpc_num_h_slices or mpc_recout_width_align
Reviewed-by: Navid Assadian <navid.assadian@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
It's possible we still allow IPS2 when all streams are DPMS off but this
is unexpected.
[HOW]
Pass the DM config value into DC so it can use the pure stream count
to decide. We will be in 0 streams for S0i3 so this will still allow
it for D3.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
EASF only applies to luma. Previously both luma and chroma taps
were checked to determine whether to enable EASF.
[HOW]
Only check if luma taps are supported before determining whether
to enable EASF or not.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pass ip_block instead of adev in set_clockgating_state() callback
functions. Modify set_clockgating_state()for all correspoding ip blocks.
v2: remove all changes for is_idle(), remove type casting
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pass ip_block instead of adev in set_powergating_state callback function.
Modify set_powergating_state ip functions for all correspoding ip blocks.
v2: fix a ip block index error.
v3: remove type casting
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The v6.13-rc2 release included a bunch of breaking changes,
specifically the MODULE_IMPORT_NS commit.
Backmerge in order to fix them before the next pull-request.
Include the fix from Stephen Roswell.
Caused by commit
25c3fd1183 ("drm/virtio: Add a helper to map and note the dma addrs and lengths")
Interacting with commit
cdd30ebb1b ("module: Convert symbol namespace to string literal")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20241209121717.2abe8026@canb.auug.org.au
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
[WHY]
Some DSC timing failed at bandwidth validation due to hactive
can't be evenly divided on each ODM segment.
[HOW]
Borrow from hblank to increase hactive to support these timing.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Hardware does not support the VTotal to be between fp2 lines of the
maximum possible VTotal, so add a capability flag to track it and apply
where necessary.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The minimum value of the dst_y_prefetch_equ was not correct
in prefetch calculation whice causes OPTC underflow.
[HOW]
Add the min operation of dst_y_prefetch_equ in prefetch calculation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Lo-an Chen <lo-an.chen@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
For better power profiling knowing the detile
buffer size at a given point in time
would be useful.
[HOW]
Add interface to retrieve detile buffer from
dc state.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Sung Lee <Sung.Lee@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
On some cards when odm is used, the monitor will have 2 separate pipes
split vertically. When compression is used on the YCbCr colour space on
the second pipe to have correct colours, we need to read a pixel from the
end of first pipe to accurately display colours. Hardware was programmed
properly to account for this extra pixel but it was not calculated
properly in software causing a split screen on some monitors.
[HOW]
The fix adjusts the second pipe's viewport and timings if the pixel
encoding is YCbCr422 or YCbCr420.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: George Shen <george.shen@amd.com>
Signed-off-by: Peterson Guo <peterson.guo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
commit 38077562e0 ("drm/amd/display: Implement new
backlight_level_params structure") adjusted DC core to require
the backlight type to be programmed in the dc link when changing
brightness. This isn't initialized in amdgpu_dm for OLED panels
though which broke brightness.
Explicitly initialize when aux support is enabled.
Reported-and-tested-by: Luke Jones <luke@ljones.dev>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3792
Fixes: 38077562e0 ("drm/amd/display: Implement new backlight_level_params structure")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20241128032200.2085398-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
An HP Pavilion Aero Laptop 13-be0xxx/8916 has an ACPI EDID, but using
it is causing corruption. It's got illogical values of not specifying
a digital interface. Sanity check the ACPI EDID to avoid tripping such
problems.
Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3782
Fixes: c6a837088b ("drm/amd/display: Fetch the EDID from _DDC if available for eDP")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20241128032500.2088288-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not all platforms provide the full range of PWM backlight capabilities
supported by the hardware through ATIF.
Use the generic drm panel minimum backlight quirk infrastructure to
override the capabilities where necessary.
Testing the backlight quirk together with the "panel_power_savings"
sysfs file has not shown any negative impact.
One quirk seems to be that 0% at panel_power_savings=0 seems to be
slightly darker than at panel_power_savings=4.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Dustin L. Howett <dustin@howett.net>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241111-amdgpu-min-backlight-quirk-v7-2-f662851fda69@weissschuh.net
Clang on LoongArch (18+) appears to be unaffected by the bug causing
excessive stack usage in calculate_bandwidth(). But when building DC_FP
support the stack frame size can be as large as 2816 bytes, which causes
the FRAME_WARN build warnings. So on LoongArch we allow building DC with
clang, but disable DC_FP by default.
The help message is also updated.
Tested-by: Rui Wang <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses a null pointer dereference issue in
hwss_setup_dpp(). The issue could occur when pipe_ctx->plane_state is
null. The fix adds a check to ensure `pipe_ctx->plane_state` is not null
before accessing. This prevents a null pointer dereference.
Fixes: 0baae62463 ("drm/amd/display: Refactor fast update to use new HWSS build sequence")
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses a null pointer dereference issue in
dcn20_program_pipe(). Previously, commit 8e4ed3cf16 ("drm/amd/display:
Add null check for pipe_ctx->plane_state in dcn20_program_pipe")
partially fixed the null pointer dereference issue. However, in
dcn20_update_dchubp_dpp(), the variable pipe_ctx is passed in, and
plane_state is accessed again through pipe_ctx. Multiple if statements
directly call attributes of plane_state, leading to potential null
pointer dereference issues. This patch adds necessary null checks to
ensure stability.
Fixes: 8e4ed3cf16 ("drm/amd/display: Add null check for pipe_ctx->plane_state in dcn20_program_pipe")
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following:
- DC core fixes
- DCN35 fix
- DCN4+ fixes
- DML2 fix
- New SPL features
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are cases where an OTG is remapped from driving a regular HDMI
display to a DP/eDP display. There are also cases where DTBCLK needs to
be enabled for HPO, but DTBCLK DTO programming may be done while OTG is
still enabled which is dangerous as the PIPE_DTO_SRC_SEL programming may
change the pixel clock generator source for a mapped and running OTG and
cause it to hang.
Remove the PIPE_DTO_SRC_SEL programming from this sequence since it is
already done in program_pixel_clk(). Additionally, make sure that
program_pixel_clk sets DTBCLK DTO as source for special HDMI cases.
Cc: stable@vger.kernel.org # 6.11+
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
SPL code forces taps to 1 when ratio is 1:1 and sharpness is off
But for chroma 1:1, need taps > 1 to handle cositing
[How]
Do not force chroma taps to 1 when ratio is 1:1 for YUV420
Remove 420_CHROMA_BYPASS mode for scaler
Reviewed-by: Navid Assadian <navid.assadian@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Early return possible if context has no clk_mgr.
This will lead to an invalid power profile being returned
which looks identical to a profile with the lowest power level.
Add back logic that populated the power profile and overwrite
the value if needed.
Cc: stable@vger.kernel.org
Fixes: d016d0dd5a ("drm/amd/display: Update Interface to Check UCLK DPM")
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Add public API to obtain number of taps in SPL.
[How]
Isolate function to calculate recout, ratios and viewport before
calculating taps. Call function in both public taps API call and private
scaling call.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When C-State entry is requested, the rate limiter will be disabled
which can result in high contention in the DCHUB return path.
[HOW]
Enable the rate limiter during C-state requests to prevent contention.
Cc: stable@vger.kernel.org # 6.11+
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The mechanism to backup and restore plane states doesn't maintain
refcount, which can cause issues if the refcount of the plane changes
in between backup and restore operations, such as memory leaks if the
refcount was supposed to go down, or double frees / invalid memory
accesses if the refcount was supposed to go up.
[How]
Cache and re-apply current refcount when restoring plane states.
Cc: stable@vger.kernel.org
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are some pipe scaler validation failure when the pipe is phantom
and causes crash in DML validation. Since, scalar parameters are not
as important in phantom pipe and we require this plane to do successful
MCLK switches, the failure condition can be ignored.
[How]
Ignore scalar validation failure if the pipe validation is marked as
phantom pipe.
Cc: stable@vger.kernel.org # 6.11+
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
No check on head pipe during the dml to dc hw mapping will allow illegal
pipe usage. This will result in a wrong pipe topology to cause mpcc tree
totally mess up then cause a display hang.
[How]
Avoid to use the pipe is head in all check and avoid ODM slice during
preferred pipe check.
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since is_dsc_possible is already checked just above, there's no need to
check it again before filling out the DSC settings.
Signed-off-by: Bhavin Sharma <bhavin.sharma@siliconsignals.io>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
At some point, the IEEE ID identification for the replay check in the
AMD EDID was added. However, this check causes the following
out-of-bounds issues when using KASAN:
[ 27.804016] BUG: KASAN: slab-out-of-bounds in amdgpu_dm_update_freesync_caps+0xefa/0x17a0 [amdgpu]
[ 27.804788] Read of size 1 at addr ffff8881647fdb00 by task systemd-udevd/383
...
[ 27.821207] Memory state around the buggy address:
[ 27.821215] ffff8881647fda00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 27.821224] ffff8881647fda80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 27.821234] >ffff8881647fdb00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 27.821243] ^
[ 27.821250] ffff8881647fdb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 27.821259] ffff8881647fdc00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 27.821268] ==================================================================
This is caused because the ID extraction happens outside of the range of
the edid lenght. This commit addresses this issue by considering the
amd_vsdb_block size.
Cc: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit removes a legacy debug_defaults_diags struct.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the nominal VBlank is too small, optimizing for stutter can cause
the prefetch bandwidth to increase drasticaly, resulting in higher
clock and power requirements. Only optimize if it is >3x the stutter
latency.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In the case where a dml allocation fails for any reason, the
current state's dml contexts would no longer be valid. Then
subsequent calls dc_state_copy_internal would shallow copy
invalid memory and if the new state was released, a double
free would occur.
[How]
Reset dml pointers in new_state to NULL and avoid invalid
pointer
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If driver allocated region6 size is not same as the size in firmware,
dmcub won't enable region6.
[How]
Use region6 size in dmcub_fw_meta instead of a constant value.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: JinZe Xu <jinze.xu@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Number of taps is incorrectly being set when integer scaling is enabled.
Taps required when src_rect != dst_rect previously not considered.
Perform the calculations when integer scaling is enabled.
Set taps to 1 if the scaling ratio is 1:1.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
IGT displays Dmesg warnings which are likely false
[How]
Disabling p-state checks leading to this warning for DCN31 and DCN314
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Emily Nie <Emily.Nie@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Garbage will show due to dig is on. So blank stream needed.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Fudongwang <Fudong.Wang@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unconditionally reading DP tunneling support results in extraneous
errors messages on certain devices. Fix this by guarding the DPCD read
for DP tunneling support for USB4 DPIA endpoints.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Need a flag to force MST blocked discovery for certain branch devices.
[How]
Added a flag to force MST blocked discovery in struct dc_panel_patch.
Reviewed-by: PeiChen Huang <peichen.huang@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In certain use case such as KDE login screen, there will be no atomic
commit while do the frame update.
If the Panel Replay enabled, it will cause the screen not updated and
looks like system hang.
[How]
Delay few atomic commits before enabled the Panel Replay just like PSR.
Fixes: be64336307 ("drm/amd/display: Re-enable panel replay feature")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3686
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3682
Tested-By: Corey Hickey <bugfood-c@fatooh.org>
Tested-By: James Courtier-Dutton <james.dutton@gmail.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Panel Replay feature may also use the same variable with PSR.
Change the variable name and make it not specify for PSR.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
String literals must be assigned to const char pointers.
[How]
By adding const keyword to fix compilation errors.
Reviewed-by: Lohita Mudimela <lohita.mudimela@amd.com>
Signed-off-by: Revalla Hari Krishna <Harikrishna.Revalla@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
HPD error status does not cover Replay desync error status
while executing autotests and CTS tests.
[How]
Refactor the checking flow, reporting the HPD error based on
different eDP feature.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
1. HDMI does not have 6 bpc support. Having 6 bpc pass validation
does not comply with spec.
2. Validate 420 only for native HDMI, but not apply to pcon use
case.
3. Current mode validation log is not readable.
[how]
1. Cap 8 bpc for dp-hdmi converter.
2. Validate yuv420 for pcon use case as well,
if rgb/yuv444 8bpc cannot fit into pcon bw limitation of
the link from the converter to HDMI sink.
3. Add readable pixel_format and color_depth into debug log.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Implement the new backlight_level_params structure as part of the VBAC
framework, the information in this structure is needed to be passed down
to the DMCUB to identify the backlight control type, to adjust the
backlight of the panel and to perform any required conversions from PWM
to nits or vice versa.
[How]
Modified existing functions to include the new backlight_level_params
structure.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Kaitlyn Tse <Kaitlyn.Tse@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Observe after suspend/resme, we can't light up mst monitors under specific
mst hub. The reason is that driver still writes DPCD DP_MSTM_CTRL after LT.
It's forbidden even we write the same value for that dpcd register.
[How]
We already resume the mst branch device dpcd settings during
resume_mst_branch_status(). Leverage drm_dp_mst_topology_queue_probe() to
only probe the topology, not calling drm_dp_mst_topology_mgr_resume() which
will set DP_MSTM_CTRL as well.
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Move the wait for pending updates past prepare_bandwidth if the previous
update was not a full update to reduce the average time it takes to
complete a full update.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
An upstream bug report suggests that there are production dGPUs that are
older than DCN401 but still have a umc_info in VBIOS tables with the
same version as expected for a DCN401 product. Hence, reading this
tables should be guarded with a version check.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3678
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
Adjust otg w/a disable condition to include HPO explicitly rather than
assuming it is implicitly used through DP2.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
Applying a hw w/a only relevant to DIG FIFO causing corruption
using HPO, do not apply the w/a if on DP2/HPO
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During boot up and resume the DC layer will reset the panel
brightness to fix a flicker issue.
It will cause the dm->actual_brightness is not the current panel
brightness level. (the dm->brightness is the correct panel level)
[How]
Set the backlight level after do the set mode.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Fixes: d9e865826c ("drm/amd/display: Simplify brightness initialization")
Reported-by: Mark Herbert <mark.herbert42@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3655
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During mode validation, there maybe modes that fail
max_downscale_src_width check and scaling_quality
taps are 0. This will cause an assert to trigger
in spl_set_filters_data() because taps are 0.
[How]
Move taps calculation for non-adaptive scaling mode
to separate function and call it
if max_downscale_src_width fails. This will
populate taps if scaling_quality taps are 0.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
SEC_CNTL isn't readable by x86 and can block Z8 entry if read.
[How]
Remove the read.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Code reading rxstatus message size was incorrectly assigning it to
uint8_t, despite the value being 10 bits long (lower byte plus lowest
2 bits from upper byte). This caused the highest 2 bits to be ignored,
potentially missing invalid values.
[How]
Change all local variables holding rxstatus message size from uint8_t
to uint16_t, as in mod_hdcp_message_hdcp2::rx_id_list_size.
Replaced untyped HDCP_2_2_HMID_RXSTATUS_MSG_SZ_HI macro with function
hdcp_2_2_hmid_rxstatus_msg_sz(const uint8_t[2]) to encapsulate entire
calculation and return a typed result.
Removed spaces mixed with tabs to fix indentation on modified lines.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 4f01a68751.
[why & how]
The offending commit caused a lighting issue for Samsung Odyssey G9
monitors when connecting via USB-C. The commit was intended to block certain UHBR rates.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
insert divided by zero protection
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Tearing can occur if there is a flip immediate plane and SW cursor.
check_subvp_sw_cursor_fallback_req falls back to SW cursor if the
stream has the potential to use subVP.
Check for fallback not needed if HW cursor is required.
e.g. Fullscreen gaming
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit c2c2ce1e96 ("drm/amd/display: Optimize passive update planes.")
removed the last caller of context_timing_trace.
Remove it.
With that gone, no one is now looking at the 'timing_trace' flag, remove
it and all the places that set it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
cm3_helper_translate_curve_to_degamma_hw_format() since it was added in
2020's commit
03f54d7d34 ("drm/amd/display: Add DCN3 DPP")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
calculate_user_regamma_coeff() and calculate_user_regamma_ramp() were
added in 2018 in commit
55a01d4023 ("drm/amd/display: Add user_regamma to color module")
but never used.
Remove them and their helpers.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts
commit 9dad21f910 ("drm/amd/display: update DML2 policy EnhancedPrefetchScheduleAccelerationFinal DCN35")
[why & how]
The offending commit exposes a hang with lid close/open behavior.
Both issues seem to be related to ODM 2:1 mode switching, so there
is another issue generic to that sequence that needs to be
investigated.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 68bf95317e)
Cc: stable@vger.kernel.org
This version brings along following fixes:
- Fix polling DSC registers during S0i3
- Fix idle optimizations entry log
- Change MPC Tree visual confirm colours
- Fix underflow when playing 8K video in full screen mode
- Optimize power up sequence for specific OLED
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add some scruct for secure display.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previously dscl_prog_data stored pointer to sharpness 1dlut table.
SPL had four pre-generated tables, one for each setup. This allowed
us to minimize number of times we had to recalculate table when
switching between setups.
However, with dual display, this becomes an issue because for a given
setup, we could have a different per app sharpness value than the
global sharpness value. So the pre-generated table will change
but both displays may point to the same table and one of them
will have the wrong sharpness setting.
[How]
Store the sharpness 1dlut table in dscl_prog_data. This ensures
that each display can have its own sharpness setting.
Reviewed-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
DSC may be power gated when coming out of S0i3, so avoid polling
DSC registers since it will fail anyways. Only read if it is known
that DSC is in use.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Whether we really enter idle optimizations are decided within DC.
Printing into dmesg before calling the DC API gives an incorrect
indication that we are entering idle optimization in cases where its
disabled manually.
To fix this, remove the print in DM and add them in DC
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
MPC background colours that use fractional components look different if
MPC OGAM is in use vs in bypass mode. The current red and orange colours
look very similar when OGAM is in bypass, so the colours need to change
to be consistently very easy to tell apart.
[How]
Use colours that only have 0 or MAX values in each component
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
The variable "ips_supported" is redundant and we can return from
dcn35_smu_get_ips_supported directly.
This fixes 1 UNUSED_VALUE issue reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
misc0, temp and split_pipe are assigned but immediately re-assigned
to other values. The early assignments are useless and are removed.
Unused variables are removed as well.
This fixes 5 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If max_downscale_src_width check fails, we exit early from
spl_calculate_scaler_params but dscl_prog_data is not fully
populated. If viewport is left at 0, it can cause crash in dml.
[How]
Call spl_set_dscl_prog_data before we exit early from
spl_calculate_scaler_params to populate dscl_prog_data
Populate taps in spl_get_optimal_number_of_taps
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Flickering observed while playing 8k HEVC-10 bit video in full screen
mode with black border. We didn't support this case for subvp.
Make change to the existing check to disable subvp for this corner case.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For Header related changes for core
[How]
Refactoring if and endif statements to enable DC_LOGGER
Reviewed-by: Mounika Adhuri <mounika.adhuri@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Lohita Mudimela <lohita.mudimela@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix DP Compliance test 4.2.1.3, 4.2.2.8, 4.3.1.12, 4.3.1.13
when IPS enabled.
Original HPD detection interval is set to 5s which violates DP
compliance.
Reduce the interval parameter, such that link training can be
finished within 5 seconds.
Fixes: afca033f10 ("drm/amd/display: Add periodic detection for IPS")
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts
commit 9dad21f910 ("drm/amd/display: update DML2 policy EnhancedPrefetchScheduleAccelerationFinal DCN35")
[why & how]
The offending commit exposes a hang with lid close/open behavior.
Both issues seem to be related to ODM 2:1 mode switching, so there
is another issue generic to that sequence that needs to be
investigated.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Adds support for P-State stall timeout detection in DCHUBBUB.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Spread on DPREFCLK by 0.3 percent can have a negative effect on sink
when PHY SSC is also spread by 0.3 percent
[How]
Add boot option for DMU to lower PHY SSC
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
OLED power up sequence takes an extra 150ms via hardcoded delay,
but there is a strict requirement on DisplayOn resume time.
For customer panel, remove these delays to meet target until a
cleaner solution is can be put in place.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are two events to trace the beginning and the end of
amdgpu_dm_atomic_commit_tail, but only the one ate the beginning was
placed. Place amdgpu_dm_atomic_commit_tail_finish tracepoint at the end
than.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Disabling P-State support on full updates for DCN401 results in
introducing additional communication with SMU. A UCLK hard min message
to SMU takes 4 seconds to go through, which was due to DCN not allowing
pstate switch, which was caused by incorrect value for TTU watermark
before blanking the HUBP prior to DPG on for servicing the test request.
Fix the issue temporarily by disallowing pstate changes for compliance
test while test request handler is reworked for a proper fix.
Fixes: 67ea53a4bd ("drm/amd/display: Disable DCN401 UCLK P-State support on full updates")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8a79f7cdbb)
Cc: stable@vger.kernel.org
[Why&How]
vblank immediate disable currently does not work for all asics. On
DCN401, the vblank interrupts never stop coming, and hence we never
get a chance to trigger idle optimizations.
Add a workaround to enable immediate disable only on APUs for now. This
adds a 2-frame delay for triggering idle optimization, which is a
negligible overhead.
Fixes: 58a261bfc9 ("drm/amd/display: use a more lax vblank enable policy for older ASICs")
Fixes: e45b6716de ("drm/amd/display: use a more lax vblank enable policy for DCN35+")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9b47278cec)
Cc: stable@vger.kernel.org
We dont need to set the functions to NULL which arent
needed as global structure members are by default
set to zero or NULL for pointers.
Cc: Leo Liu <leo.liu@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix dcn401 idle optimization problem
- Fix cursor corruption on dcn35
- Fix DP LL compliance failures
- Fix SubVP Phantom VBlank End calculation
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & How]
The original guard is wrongly to be set as for dcn30.
Changed it from 30 to 301.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current fullscreen check in SPL using dm_helpers is out-of-sync
with dc state. This causes an issue during minimal transition
where we pick an invalid intermediate state because the pre and
post fullscreen status are different.
[How]
Add sharpening_required flag to dc_stream_state. Use this flag to
indicate if we are in fullscreen or not. Propagate flag to SPL for
fullscreen status. Remove workaround in DML
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The phantom stream timing is copied from the main stream as most
parameters are identical, however some need to be recalculated.
Currently VBlank End is not recalculated and copied from the main
incorrectly.
[HOW]
Recalculate VBlank End for phantom stream timing.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Disabling P-State support on full updates for DCN401 results in
introducing additional communication with SMU. A UCLK hard min message
to SMU takes 4 seconds to go through, which was due to DCN not allowing
pstate switch, which was caused by incorrect value for TTU watermark
before blanking the HUBP prior to DPG on for servicing the test request.
Fix the issue temporarily by disallowing pstate changes for compliance
test while test request handler is reworked for a proper fix.
Fixes: 67ea53a4bd ("drm/amd/display: Disable DCN401 UCLK P-State support on full updates")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Array indices out of bound caused memory corruption. Adding checks to
ensure that array index stays in bound.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reuse subvp enable check from DCN32 for IGT testing of Sub-Viewport
feature on DCN401
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Cursor corruption observed on USBC display with specific system setup with a
reboot. Cursor memory might still in the lightsleep state due to voltage
issue, we need program DISPCLK_R_GATE_DISABLE to avoid this issue only on
DCN35.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
vblank immediate disable currently does not work for all asics. On
DCN401, the vblank interrupts never stop coming, and hence we never
get a chance to trigger idle optimizations.
Add a workaround to enable immediate disable only on APUs for now. This
adds a 2-frame delay for triggering idle optimization, which is a
negligible overhead.
Fixes: 58a261bfc9 ("drm/amd/display: use a more lax vblank enable policy for older ASICs")
Fixes: e45b6716de ("drm/amd/display: use a more lax vblank enable policy for DCN35+")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a boundary check for the hpd_source index during the
link encoder creation process for all dcn401 ip. The check ensures that the
index is within the valid range of the link_enc_hpd_regs array to
prevent out-of-bounds access.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a boundary check for the hpd_source index during the
link encoder creation process for all dcn10 ip. The check ensures that the
index is within the valid range of the link_enc_hpd_regs array to
prevent out-of-bounds access.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a boundary check for the hpd_source index during the
link encoder creation process for all DCExxx IP's. The check ensures
that the index is within the valid range of the link_enc_hpd_regs array
to prevent out-of-bounds access.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a boundary check for the hpd_source index during the
link encoder creation process for dcn20/dcn201 IP's. The check ensures
that the index is within the valid range of the link_enc_hpd_regs array
to prevent out-of-bounds access.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in a dm_error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Disable dynamic ODM when sharpness is enabled
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
The function core_link_read_dpcd returns status which is not used at
all, making them useless assignments.
[HOW]
Print error messages if core_link_read_dpcd does not return DC_OK.
This fixes 2 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to clean up unnecessary asserts, one of which is an assert in
resource_is_pipe_type that fires if a pipe has no stream and still has
pointers to other pipes ("dangling state"). This gets hit because pipes
are not properly cleaned up in reset_back_end_for_pipe. When resetting a
pipe, the existing MPCC / ODM combine pointers are no longer valid,
especially when we put ODM in bypass.
[How]
- reset pipe pointers in reset_back_end_for_pipe
- remove useless code to avoid confusion
(a long time ago it had a reason to be there, not anymore)
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Pass in sharpening policy through plane state from control side
[How]
Add sharpener support through dc_caps.
Add sharpen policy to plane state and move to spl_input.
Pass sharpen policy from plane state to SPL.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Code for dcn401 to calculate available MALL size for display was shared
with dcn32 and did not provide the correct result for all ASICs.
[HOW]
Add dcn401 specific function to properly calculate the available MALL
for display.
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
To get sink emission rate information for future
supported refresh rate calculation.
Reviewed-by: ChunTao Tso <chuntao.tso@amd.com>
Signed-off-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Print error messages when programming shaper lut or 3dlut fails.
This fixes 5 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
A race condition occurs between cursor movement and vertical interrupt control
thread from OS, with both threads trying to exit IPS2.
Vertical interrupt control thread clears the prev driver allow signal while not fully
finishing the IPS2 exit process.
[How]
We want to detect all the allow signals have been cleared before we perform the full exit.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
