Enable the cleaner shader for GFX10.3.2/10.3.4/10.3.5 GPUs to provide
data isolation between GPU workloads. The cleaner shader is responsible
for clearing the Local Data Store (LDS), Vector General Purpose
Registers (VGPRs), and Scalar General Purpose Registers (SGPRs), which
helps prevent data leakage and ensures accurate computation results.
This update extends cleaner shader support to GFX10.3.2/10.3.4/10.3.5
GPUs, previously available for GFX10.3.0. It enhances security by
clearing GPU memory between processes and maintains a consistent GPU
state across KGD and KFD workloads.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds the cleaner shader microcode for GFX10.3.0 GPUs. The
cleaner shader is a piece of GPU code that is used to clear or
initialize certain GPU resources, such as Local Data Share (LDS), Vector
General Purpose Registers (VGPRs), and Scalar General Purpose Registers
(SGPRs).
Clearing these resources is important for ensuring data isolation
between different workloads running on the GPU. Without the cleaner
shader, residual data from a previous workload could potentially be
accessed by a subsequent workload, leading to data leaks and incorrect
computation results.
The cleaner shader microcode is represented as an array of 32-bit words
(`gfx_10_3_0_cleaner_shader_hex`). This array is the binary
representation of the cleaner shader code, which is written in a
low-level GPU instruction set.
When the cleaner shader feature is enabled, the AMDGPU driver loads this
array into a specific location in the GPU memory. The GPU then reads
this memory location to fetch and execute the cleaner shader
instructions.
The cleaner shader is executed automatically by the GPU at the end of
each workload, before the next workload starts. This ensures that all
GPU resources are in a clean state before the start of each workload.
This addition is part of the cleaner shader feature implementation. The
cleaner shader feature helps resource utilization by cleaning up GPU
resources after they are used. It also enhances security and reliability
by preventing data leaks between workloads.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This partially reverts commit 194eb174cb.
This commit introduced a new state variable into adev without even
remotely worrying about CPU barriers.
Since we already have the amdgpu_in_reset() function exactly for this
use case partially revert that.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's unused.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some of the firmware that is loaded by amdgpu is not actually required.
For example the ISP firmware on some SoCs is optional, and if it's not
present the ISP IP block just won't be initialized.
The firmware loader core however will show a warning when this happens
like this:
```
Direct firmware load for amdgpu/isp_4_1_0.bin failed with error -2
```
To avoid confusion for non-required firmware, adjust the amd-ucode helper
to take an extra argument indicating if the firmware is required or
optional.
On optional firmware use firmware_request_nowarn() instead of
request_firmware() to avoid the warnings.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/amd-gfx/df71d375-7abd-4b32-97ce-15e57846eed8@amd.com/T/#t
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pass ip_block instead of adev in set_clockgating_state() callback
functions. Modify set_clockgating_state()for all correspoding ip blocks.
v2: remove all changes for is_idle(), remove type casting
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pass ip_block instead of adev in set_powergating_state callback function.
Modify set_powergating_state ip functions for all correspoding ip blocks.
v2: fix a ip block index error.
v3: remove type casting
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to perform the two MMIO writes in the KIQ
Setting registers programmed period, and reducing the MMIO
writes will save the driver loading time.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add two sysfs interfaces for gfx and compute:
gfx_reset_mask
compute_reset_mask
These interfaces are read-only and show the resets supported by the IP.
For example, full adapter reset (mode1/mode2/BACO/etc),
soft reset, queue reset, and pipe reset.
V2: the sysfs node returns a text string instead of some flags (Christian)
v3: add a generic helper which takes the ring as parameter
and print the strings in the order they are applied (Christian)
check amdgpu_gpu_recovery before creating sysfs file itself,
and initialize supported_reset_types in IP version files (Lijo)
v4: Fixing uninitialized variables (Tim)
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make amdgpu_gfx_sysfs_init/fini functions as common entry points for all
gfx related sysfs nodes.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Optimize gfx_v10_ring_insert_nop() to call
optimized version of amdgpu_ring_insert_nop
instead of calling amdgpu_ring_write for number
of nop times.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit applies isolation enforcement to the GFX and Compute rings
in the gfx_v10_0 module.
The commit sets `amdgpu_gfx_enforce_isolation_ring_begin_use` and
`amdgpu_gfx_enforce_isolation_ring_end_use` as the functions to be
called when a ring begins and ends its use, respectively.
`amdgpu_gfx_enforce_isolation_ring_begin_use` is called when a ring
begins its use. This function cancels any scheduled
`enforce_isolation_work` and, if necessary, signals the Kernel Fusion
Driver (KFD) to stop the runqueue.
`amdgpu_gfx_enforce_isolation_ring_end_use` is called when a ring ends
its use. This function schedules `enforce_isolation_work` to be run
after a delay.
These functions are part of the Enforce Isolation Handler, which
enforces shader isolation on AMD GPUs to prevent data leakage between
different processes.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The patch modifies the gfx_v10_0_kiq_set_resources function to write
the cleaner shader's memory controller address to the ring buffer. It
also adds a new function, gfx_v10_0_ring_emit_cleaner_shader, which
emits the PACKET3_RUN_CLEANER_SHADER packet to the ring buffer.
This patch adds support for the PACKET3_RUN_CLEANER_SHADER packet in the
gfx_v10_0 module. This packet is used to emit the cleaner shader, which
is used to clear GPU memory before it's reused, helping to prevent data
leakage between different processes.
Finally, the patch updates the ring function structures to include the
new gfx_v10_0_ring_emit_cleaner_shader function. This allows the
cleaner shader to be emitted as part of the ring's operations.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of hw_fini.
Also update the ip_block ptr where ever needed as
there were cyclic dependency of hw_fini on suspend
and some followed clean up.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of hw_init.
Also update the ip_block ptr where ever needed as
there were cyclic dependency of hw_init on resume.
v2: squash in isp fix
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of resume.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of suspend.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of wait_for_idle.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of soft_reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the *handle to amdgpu_ip_block ptr for all
functions pointers of sw_fini.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the *handle to amdgpu_ip_block ptr for all
functions pointers of sw_init.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the ptr handle to amdgpu_ip_block ptr in all
the functions of late_init function ptr.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the handle ptr to amdgpu_ip_block ptr
for all functions pointers on early_init.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the ptr handle to amdgpu_ip_block ptr in all
the functions affected.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the ptr handle to amdgpu_ip_block ptr in all
the functions.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than open coding it for the queue reset.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's not supported under SR-IOV at the moment.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a racing condition that cp firmware modifies
MQD in reset sequence after driver updates it for
remapping. We have to wait till CP_HQD_ACTIVE becoming
false then remap the queue.
v2: fix KIQ locking (Alex)
v3: fix KIQ locking harder (Jessie)
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kiq command unmap_queues only does the dequeueing action.
We have to map the queue back with clean mqd.
v2: fix up error handling (Alex)
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add ring reset callbacks for gfx and compute.
v2: fix gfx handling
v3: wait for KIQ to complete
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Skip rlc firmware validation to ignore firmware header size mismatch issues.
This restores the workaround added in
commit 849e133c97 ("drm/amdgpu: Fix the null pointer when load rlc firmware")
Fixes: 3af2c80ae2 ("drm/amdgpu: refine gfx10 firmware loading")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3551
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change condition, if (ptr == NULL) to if (!ptr)
for a better format and fix the warning.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adding NOP packets one by one in the ring
does not use the CP efficiently.
Solution:
Use CP optimization while adding NOP packet's so PFP
can discard NOP packets based on information of count
from the Header instead of fetching all NOP packets
one by one.
Cc: Christian König <christian.koenig@amd.com>
Cc: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Cc: Tvrtko Ursulin <tursulin@igalia.com>
Cc: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For the bad opcode case, it will cause CP/ME hang.
The firmware will prevent the ME side from hanging by raising a bad opcode interrupt.
And the driver needs to perform a vmid reset when receiving the interrupt.
v2: update irq naming (drop priv) (Alex)
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to handle the interrupt enables for all pipes.
v2: fix indexing (Jessie)
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It should work the same for compute as well as gfx.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFX ME right now is one but this could change in
future SOC's. Use no of ME for GFX as start point
for ME for compute for GFX10.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Certain call paths still load the SMU firmware for APUs,
which needs to be skipped.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During ip dump in gfx10 the index variable is reused but is
not reinitialized to 0 and this causes the index calculation
to be wrong and access out of bound access.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
refine gfx10 firmware loading
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix comments and error messages to rightly represent
the information.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename the variable ip_dump_cp_queues to ip_dump_compute_queue
as it represent compute queues.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It was an enablement vehicle for MES 11 and was never
productized. Remove it.
v2: drop additional checks in the GFX10 code.
v3: drop mes_api_def.h
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add gfx queue register for all instances in devcoredump
for gfx10.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to dump registers of all instances of
cp queue registers of gfx10 to devcoredump.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename the memory pointer from ip_dump to ip_dump_core
to make it specific to core registers and rest other
registers to be dumped in their respective memories.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1
- driver MMIO read the register to check whether write is required
- if write is required, sriov full time to use rlcg, otherwise use KIQ
v2
- include gfx v11 sriov runtime case
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
