2
0
mirror of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2025-09-04 20:19:47 +08:00
Commit Graph

2324 Commits

Author SHA1 Message Date
Hsin-chen Chuang
bd30e8d7bf Bluetooth: Always allow SCO packets for user channel
The SCO packets from Bluetooth raw socket are now rejected because
hci_conn_num is left 0. This patch allows such the usecase to enable
the userspace SCO support.

Fixes: b16b327edb ("Bluetooth: btusb: add sysfs attribute to control USB alt setting")
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-02-20 13:25:08 -05:00
Kiran K
872274b992 Bluetooth: btintel_pcie: Fix a potential race condition
On HCI_OP_RESET command, firmware raises alive interrupt. Driver needs
to wait for this before sending other command. This patch fixes the potential
miss of alive interrupt due to which HCI_OP_RESET can timeout.

Expected flow:
If tx command is HCI_OP_RESET,
  1. set data->gp0_received = false
  2. send HCI_OP_RESET
  3. wait for alive interrupt

Actual flow having potential race:
If tx command is HCI_OP_RESET,
 1. send HCI_OP_RESET
   1a. Firmware raises alive interrupt here and in ISR
       data->gp0_received  is set to true
 2. set data->gp0_received = false
 3. wait for alive interrupt

Signed-off-by: Kiran K <kiran.k@intel.com>
Fixes: 05c200c8f0 ("Bluetooth: btintel_pcie: Add handshake between driver and firmware")
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Closes: https://patchwork.kernel.org/project/bluetooth/patch/20241001104451.626964-1-kiran.k@intel.com/
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-02-13 11:14:04 -05:00
Neeraj Sanjay Kale
7de119bb79 Bluetooth: btnxpuart: Fix glitches seen in dual A2DP streaming
This fixes a regression caused by previous commit for fixing truncated
ACL data, which is causing some intermittent glitches when running two
A2DP streams.

serdev_device_write_buf() is the root cause of the glitch, which is
reverted, and the TX work will continue to write until the queue is empty.

This change fixes both issues. No A2DP streaming glitches or truncated
ACL data issue observed.

Fixes: 8023dd2204 ("Bluetooth: btnxpuart: Fix driver sending truncated data")
Fixes: 689ca16e52 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets")
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-29 15:23:49 -05:00
Hsin-chen Chuang
0983fb4799 Bluetooth: Fix possible infinite recursion of btusb_reset
The function enters infinite recursion if the HCI device doesn't support
GPIO reset: btusb_reset -> hdev->reset -> vendor_reset -> btusb_reset...

btusb_reset shouldn't call hdev->reset after commit f07d478090
("Bluetooth: Get rid of cmd_timeout and use the reset callback")

Fixes: f07d478090 ("Bluetooth: Get rid of cmd_timeout and use the reset callback")
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-29 15:23:18 -05:00
Douglas Anderson
e9087e8288 Bluetooth: btusb: mediatek: Add locks for usb_driver_claim_interface()
The documentation for usb_driver_claim_interface() says that "the
device lock" is needed when the function is called from places other
than probe(). This appears to be the lock for the USB interface
device. The Mediatek btusb code gets called via this path:

  Workqueue: hci0 hci_power_on [bluetooth]
  Call trace:
   usb_driver_claim_interface
   btusb_mtk_claim_iso_intf
   btusb_mtk_setup
   hci_dev_open_sync
   hci_power_on
   process_scheduled_works
   worker_thread
   kthread

With the above call trace the device lock hasn't been claimed. Claim
it.

Without this fix, we'd sometimes see the error "Failed to claim iso
interface". Sometimes we'd even see worse errors, like a NULL pointer
dereference (where `intf->dev.driver` was NULL) with a trace like:

  Call trace:
   usb_suspend_both
   usb_runtime_suspend
   __rpm_callback
   rpm_suspend
   pm_runtime_work
   process_scheduled_works

Both errors appear to be fixed with the proper locking.

Fixes: ceac1cb025 ("Bluetooth: btusb: mediatek: add ISO data transmission functions")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-29 15:19:30 -05:00
Zijun Hu
a2fad24894 Bluetooth: qca: Fix poor RF performance for WCN6855
For WCN6855, board ID specific NVM needs to be downloaded once board ID
is available, but the default NVM is always downloaded currently.

The wrong NVM causes poor RF performance, and effects user experience
for several types of laptop with WCN6855 on the market.

Fix by downloading board ID specific NVM if board ID is available.

Fixes: 095327fede ("Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6855")
Cc: stable@vger.kernel.org # 6.4
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org> #Thinkpad X13s
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15 10:37:23 -05:00
Hsin-chen Chuang
f07d478090 Bluetooth: Get rid of cmd_timeout and use the reset callback
The hdev->reset is never used now and the hdev->cmd_timeout actually
does reset. This patch changes the call path from
  hdev->cmd_timeout -> vendor_cmd_timeout -> btusb_reset -> hdev->reset
, to
  hdev->reset -> vendor_reset -> btusb_reset
Which makes it clear when we export the hdev->reset to a wider usage
e.g. allowing reset from sysfs.

This patch doesn't introduce any behavior change.

Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15 10:36:42 -05:00
Hsin-chen Chuang
7c39342175 Bluetooth: Remove the cmd timeout count in btusb
Remove the cmd timeout count in btusb since we only ever allow one
command in flight at a time. We should always reset after a single
command times out.

Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15 10:36:26 -05:00
Krzysztof Kozlowski
acdbea5e71 Bluetooth: Use str_enable_disable-like helpers
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read.  Ternary
   operator has three arguments and with wrapping might lead to quite
   long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
   file.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15 10:36:11 -05:00
Hao Qin
a720861076 Bluetooth: btmtk: Remove resetting mt7921 before downloading the fw
Remove resetting mt7921 before downloading the fw, as it may cause
command timeout when performing the reset.

Signed-off-by: Hao Qin <hao.qin@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15 10:35:55 -05:00
Garrett Wilke
181a2631a3 Bluetooth: btusb: Add RTL8851BE device 13d3:3600
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T:  Bus=07 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3600 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms

Signed-off-by: Garrett Wilke <garrett@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15 10:35:25 -05:00
Garrett Wilke
4259cdbfc7 Bluetooth: btusb: Add MT7921e device 13d3:3576
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T:  Bus=01 Lev=01 Prnt=01 Port=04 Cnt=03 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3576 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
I:  If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

Signed-off-by: Garrett Wilke <garrett@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15 10:34:55 -05:00
Max Chou
3c15082f35 Bluetooth: btrtl: check for NULL in btrtl_setup_realtek()
If insert an USB dongle which chip is not maintained in ic_id_table, it
will hit the NULL point accessed. Add a null point check to avoid the
Kernel Oops.

Fixes: b39910bb54 ("Bluetooth: Populate hci_set_hw_info for Intel and Realtek")
Reviewed-by: Alex Lu <alex_lu@realsil.com.cn>
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15 10:34:41 -05:00
Charles Han
b88655bc65 Bluetooth: btbcm: Fix NULL deref in btbcm_get_board_name()
devm_kstrdup() can return a NULL pointer on failure,but this
returned value in btbcm_get_board_name() is not checked.
Add NULL check in btbcm_get_board_name(), to handle kernel NULL
pointer dereference error.

Fixes: f9183eaad9 ("Bluetooth: btbcm: Use devm_kstrdup()")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15 10:34:27 -05:00
Cheng Jiang
30209aeff7 Bluetooth: qca: Expand firmware-name to load specific rampatch
The firmware-name property has been expanded to specify the names of NVM
and rampatch firmware for certain chips, such as the QCA6698 Bluetooth
chip. Although it shares the same IP core as the WCN6855, the QCA6698
has different RF components and RAM sizes, necessitating new firmware
files. This change allows for the configuration of NVM and rampatch in
DT.

Possible configurations:
firmware-name = QCA6698/hpnv21.bin, QCA6698/hpbtfw21.tlv;
firmware-name = QCA6698/hpnv21, QCA6698/hpbtfw21.tlv;

Signed-off-by: Cheng Jiang <quic_chejiang@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15 10:34:12 -05:00
Cheng Jiang
a4c5a468c6 Bluetooth: qca: Update firmware-name to support board specific nvm
Different connectivity boards may be attached to the same platform. For
example, QCA6698-based boards can support either a two-antenna or
three-antenna solution, both of which work on the sa8775p-ride platform.
Due to differences in connectivity boards and variations in RF
performance from different foundries, different NVM configurations are
used based on the board ID.

Therefore, in the firmware-name property, if the NVM file has an
extension, the NVM file will be used. Otherwise, the system will first
try the .bNN (board ID) file, and if that fails, it will fall back to
the .bin file.

Possible configurations:
firmware-name = "QCA6698/hpnv21";
firmware-name = "QCA6698/hpnv21.bin";

Signed-off-by: Cheng Jiang <quic_chejiang@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15 10:33:56 -05:00
En-Wei Wu
f63f401130 Bluetooth: btusb: Add new VID/PID 13d3/3628 for MT7925
Add VID 13d3 & PID 3628 for MediaTek MT7925 USB Bluetooth chip.

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3628 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15 10:33:27 -05:00
Andrew Halaney
45e7d389bf Bluetooth: btusb: Add new VID/PID 13d3/3610 for MT7922
A new machine has a Archer AX3000 / TX55e in it,
and out the box reported issues resetting hci0. It looks like
this is a MT7922 from the lspci output, so treat it as a MediaTek
device and use the proper callbacks. With that in place an xbox
controller can be used without issue as seen below:

    [    7.047388] Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20241106163512
    [    9.583883] Bluetooth: hci0: Device setup in 2582842 usecs
    [    9.583895] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
    [    9.644780] Bluetooth: hci0: AOSP extensions version v1.00
    [    9.644784] Bluetooth: hci0: AOSP quality report is supported
    [  876.379876] input: Xbox Wireless Controller as /devices/virtual/misc/uhid/0005:045E:0B13.0006/input/input27
    [  876.380215] hid-generic 0005:045E:0B13.0006: input,hidraw3: BLUETOOTH HID v5.15 Gamepad [Xbox Wireless Controller] on c0:bf:be:27:de:f7
    [  876.429368] input: Xbox Wireless Controller as /devices/virtual/misc/uhid/0005:045E:0B13.0006/input/input28
    [  876.429423] microsoft 0005:045E:0B13.0006: input,hidraw3: BLUETOOTH HID v5.15 Gamepad [Xbox Wireless Controller] on c0:bf:be:27:de:f7

lspci output:

    root@livingroom:/home/ajhalaney/git# lspci
    ...
    05:00.0 Network controller: MEDIATEK Corp. MT7922 802.11ax PCI Express Wireless Network Adapter

and USB device:

    root@livingroom:/home/ajhalaney/git# cat /sys/kernel/debug/usb/devices
    ...
    T:  Bus=01 Lev=01 Prnt=01 Port=10 Cnt=03 Dev#=  4 Spd=480  MxCh= 0
    D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
    P:  Vendor=13d3 ProdID=3610 Rev= 1.00
    S:  Manufacturer=MediaTek Inc.
    S:  Product=Wireless_Device
    S:  SerialNumber=000000000
    C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
    A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
    I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
    E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
    I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
    I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
    I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
    I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
    I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
    I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
    I:  If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
    E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
    I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
    E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

Signed-off-by: Andrew Halaney <ajhalaney@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15 10:33:12 -05:00
Ying Hsu
b16b327edb Bluetooth: btusb: add sysfs attribute to control USB alt setting
When a Bluetooth raw socket is open, the HCI event related to SCO
connection changes are not dispatched to the hci_event module, and
the underlying Bluetooth controller's USB Interface 1 will not be
updated accordingly.

This patch adds `isoc_alt` sysfs attribute, allowing user space
to update the alternate setting of the USB interface alternate
setting as needed.

Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15 10:32:57 -05:00
Mark Dietzer
a6587d7ed2 Bluetooth: btusb: Add ID 0x2c7c:0x0130 for Qualcomm WCN785x
Adds a new entry with VID 0x2c7c and PID 0x0130 to the btusb quirks table as it uses a Qualcomm WCN785x chipset

The device information from /sys/kernel/debug/usb/devices is provided below:
T:  Bus=01 Lev=01 Prnt=01 Port=04 Cnt=05 Dev#=  7 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=0130 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:  If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  65 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  65 Ivl=1ms

Signed-off-by: Mark Dietzer <git@doridian.net>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15 10:32:41 -05:00
Chris Lu
67dba2c28f Bluetooth: btmtk: Fix failed to send func ctrl for MediaTek devices.
Use usb_autopm_get_interface() and usb_autopm_put_interface()
in btmtk_usb_shutdown(), it could send func ctrl after enabling
autosuspend.

Bluetooth: btmtk_usb_hci_wmt_sync() hci0: Execution of wmt command
           timed out
Bluetooth: btmtk_usb_shutdown() hci0: Failed to send wmt func ctrl
           (-110)

Fixes: 5c5e8c52e3 ("Bluetooth: btmtk: move btusb_mtk_[setup, shutdown] to btmtk.c")
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-08 11:14:03 -05:00
Neeraj Sanjay Kale
8023dd2204 Bluetooth: btnxpuart: Fix driver sending truncated data
This fixes the apparent controller hang issue seen during stress test
where the host sends a truncated payload, followed by HCI commands. The
controller treats these HCI commands as a part of previously truncated
payload, leading to command timeouts.

Adding a serdev_device_wait_until_sent() call after
serdev_device_write_buf() fixed the issue.

Fixes: 689ca16e52 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets")
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-08 11:14:02 -05:00
Thadeu Lima de Souza Cascardo
b548f5e945 Bluetooth: btmtk: avoid UAF in btmtk_process_coredump
hci_devcd_append may lead to the release of the skb, so it cannot be
accessed once it is called.

==================================================================
BUG: KASAN: slab-use-after-free in btmtk_process_coredump+0x2a7/0x2d0 [btmtk]
Read of size 4 at addr ffff888033cfabb0 by task kworker/0:3/82

CPU: 0 PID: 82 Comm: kworker/0:3 Tainted: G     U             6.6.40-lockdep-03464-g1d8b4eb3060e #1 b0b3c1cc0c842735643fb411799d97921d1f688c
Hardware name: Google Yaviks_Ufs/Yaviks_Ufs, BIOS Google_Yaviks_Ufs.15217.552.0 05/07/2024
Workqueue: events btusb_rx_work [btusb]
Call Trace:
 <TASK>
 dump_stack_lvl+0xfd/0x150
 print_report+0x131/0x780
 kasan_report+0x177/0x1c0
 btmtk_process_coredump+0x2a7/0x2d0 [btmtk 03edd567dd71a65958807c95a65db31d433e1d01]
 btusb_recv_acl_mtk+0x11c/0x1a0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec]
 btusb_rx_work+0x9e/0xe0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec]
 worker_thread+0xe44/0x2cc0
 kthread+0x2ff/0x3a0
 ret_from_fork+0x51/0x80
 ret_from_fork_asm+0x1b/0x30
 </TASK>

Allocated by task 82:
 stack_trace_save+0xdc/0x190
 kasan_set_track+0x4e/0x80
 __kasan_slab_alloc+0x4e/0x60
 kmem_cache_alloc+0x19f/0x360
 skb_clone+0x132/0xf70
 btusb_recv_acl_mtk+0x104/0x1a0 [btusb]
 btusb_rx_work+0x9e/0xe0 [btusb]
 worker_thread+0xe44/0x2cc0
 kthread+0x2ff/0x3a0
 ret_from_fork+0x51/0x80
 ret_from_fork_asm+0x1b/0x30

Freed by task 1733:
 stack_trace_save+0xdc/0x190
 kasan_set_track+0x4e/0x80
 kasan_save_free_info+0x28/0xb0
 ____kasan_slab_free+0xfd/0x170
 kmem_cache_free+0x183/0x3f0
 hci_devcd_rx+0x91a/0x2060 [bluetooth]
 worker_thread+0xe44/0x2cc0
 kthread+0x2ff/0x3a0
 ret_from_fork+0x51/0x80
 ret_from_fork_asm+0x1b/0x30

The buggy address belongs to the object at ffff888033cfab40
 which belongs to the cache skbuff_head_cache of size 232
The buggy address is located 112 bytes inside of
 freed 232-byte region [ffff888033cfab40, ffff888033cfac28)

The buggy address belongs to the physical page:
page:00000000a174ba93 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x33cfa
head:00000000a174ba93 order:1 entire_mapcount:0 nr_pages_mapped:0 pincount:0
anon flags: 0x4000000000000840(slab|head|zone=1)
page_type: 0xffffffff()
raw: 4000000000000840 ffff888100848a00 0000000000000000 0000000000000001
raw: 0000000000000000 0000000080190019 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888033cfaa80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
 ffff888033cfab00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
>ffff888033cfab80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                     ^
 ffff888033cfac00: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc
 ffff888033cfac80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Check if we need to call hci_devcd_complete before calling
hci_devcd_append. That requires that we check data->cd_info.cnt >=
MTK_COREDUMP_NUM instead of data->cd_info.cnt > MTK_COREDUMP_NUM, as we
increment data->cd_info.cnt only once the call to hci_devcd_append
succeeds.

Fixes: 0b70151328 ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-12-12 09:25:28 -05:00
Linus Torvalds
e70140ba0d Get rid of 'remove_new' relic from platform driver struct
The continual trickle of small conversion patches is grating on me, and
is really not helping.  Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:

  /*
   * .remove_new() is a relic from a prototype conversion of .remove().
   * New drivers are supposed to implement .remove(). Once all drivers are
   * converted to not use .remove_new any more, it will be dropped.
   */

This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.

I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.

Then I just removed the old (sic) .remove_new member function, and this
is the end result.  No more unnecessary conversion noise.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-12-01 15:12:43 -08:00
Linus Torvalds
fcc79e1714 Networking changes for 6.13.
The most significant set of changes is the per netns RTNL. The new
 behavior is disabled by default, regression risk should be contained.
 
 Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
 default value from PTP_1588_CLOCK_KVM, as the first is intended to be
 a more reliable replacement for the latter.
 
 Core
 ----
 
  - Started a very large, in-progress, effort to make the RTNL lock
    scope per network-namespace, thus reducing the lock contention
    significantly in the containerized use-case, comprising:
    - RCU-ified some relevant slices of the FIB control path
    - introduce basic per netns locking helpers
    - namespacified the IPv4 address hash table
    - remove rtnl_register{,_module}() in favour of rtnl_register_many()
    - refactor rtnl_{new,del,set}link() moving as much validation as
      possible out of RTNL lock
    - convert all phonet doit() and dumpit() handlers to RCU
    - convert IPv4 addresses manipulation to per-netns RTNL
    - convert virtual interface creation to per-netns RTNL
    the per-netns lock infra is guarded by the CONFIG_DEBUG_NET_SMALL_RTNL
    knob, disabled by default ad interim.
 
  - Introduce NAPI suspension, to efficiently switching between busy
    polling (NAPI processing suspended) and normal processing.
 
  - Migrate the IPv4 routing input, output and control path from direct
    ToS usage to DSCP macros. This is a work in progress to make ECN
    handling consistent and reliable.
 
  - Add drop reasons support to the IPv4 rotue input path, allowing
    better introspection in case of packets drop.
 
  - Make FIB seqnum lockless, dropping RTNL protection for read
    access.
 
  - Make inet{,v6} addresses hashing less predicable.
 
  - Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
    and timestamps
 
 Things we sprinkled into general kernel code
 --------------------------------------------
 
  - Add small file operations for debugfs, to reduce the struct ops size.
 
  - Refactoring and optimization for the implementation of page_frag API,
    This is a preparatory work to consolidate the page_frag
    implementation.
 
 Netfilter
 ---------
 
  - Optimize set element transactions to reduce memory consumption
 
  - Extended netlink error reporting for attribute parser failure.
 
  - Make legacy xtables configs user selectable, giving users
    the option to configure iptables without enabling any other config.
 
  - Address a lot of false-positive RCU issues, pointed by recent
    CI improvements.
 
 BPF
 ---
 
  - Put xsk sockets on a struct diet and add various cleanups. Overall,
    this helps to bump performance by 12% for some workloads.
 
  - Extend BPF selftests to increase coverage of XDP features in
    combination with BPF cpumap.
 
  - Optimize and homogenize bpf_csum_diff helper for all archs and also
    add a batch of new BPF selftests for it.
 
  - Extend netkit with an option to delegate skb->{mark,priority}
    scrubbing to its BPF program.
 
  - Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
    programs.
 
 Protocols
 ---------
 
  - Introduces 4-tuple hash for connected udp sockets, speeding-up
    significantly connected sockets lookup.
 
  - Add a fastpath for some TCP timers that usually expires after close,
    the socket lock contention.
 
  - Add inbound and outbound xfrm state caches to speed up state lookups.
 
  - Avoid sending MPTCP advertisements on stale subflows, reducing
    risks on loosing them.
 
  - Make neighbours table flushing more scalable, maintaining per device
    neigh lists.
 
 Driver API
 ----------
 
  - Introduce a unified interface to configure transmission H/W shaping,
    and expose it to user-space via generic-netlink.
 
  - Add support for per-NAPI config via netlink. This makes napi
    configuration persistent across queues removal and re-creation.
    Requires driver updates, currently supported drivers are:
    nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
 
  - Add ethtool support for writing SFP / PHY firmware blocks.
 
  - Track RSS context allocation from ethtool core.
 
  - Implement support for mirroring to DSA CPU port, via TC mirror
    offload.
 
  - Consolidate FDB updates notification, to avoid duplicates on
    device-specific entries.
 
  - Expose DPLL clock quality level to the user-space.
 
  - Support master-slave PHY config via device tree.
 
 Tests and tooling
 -----------------
 
  - forwarding: introduce deferred commands, to simplify
    the cleanup phase
 
 Drivers
 -------
 
  - Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
    Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
    IRQs and queues to NAPI IDs, allowing busy polling and better
    introspection.
 
  - Ethernet high-speed NICs:
    - nVidia/Mellanox:
      - mlx5:
        - a large refactor to implement support for cross E-Switch
          scheduling
        - refactor H/W conter management to let it scale better
        - H/W GRO cleanups
    - Intel (100G, ice)::
      - adds support for ethtool reset
      - implement support for per TX queue H/W shaping
    - AMD/Solarflare:
      - implement per device queue stats support
    - Broadcom (bnxt):
      - improve wildcard l4proto on IPv4/IPv6 ntuple rules
    - Marvell Octeon:
      - Adds representor support for each Resource Virtualization Unit
        (RVU) device.
    - Hisilicon:
      - adds support for the BMC Gigabit Ethernet
    - IBM (EMAC):
      - driver cleanup and modernization
    - Cisco (VIC):
      - raise the queues number limit to 256
 
  - Ethernet virtual:
    - Google vNIC:
      - implements page pool support
    - macsec:
      - inherit lower device's features and TSO limits when offloading
    - virtio_net:
      - enable premapped mode by default
      - support for XDP socket(AF_XDP) zerocopy TX
    - wireguard:
      - set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
        packets.
 
  - Ethernet NICs embedded and virtual:
    - Broadcom ASP:
      - enable software timestamping
    - Freescale:
      - add enetc4 PF driver
    - MediaTek: Airoha SoC:
      - implement BQL support
    - RealTek r8169:
      - enable TSO by default on r8168/r8125
      - implement extended ethtool stats
    - Renesas AVB:
      - enable TX checksum offload
    - Synopsys (stmmac):
      - support header splitting for vlan tagged packets
      - move common code for DWMAC4 and DWXGMAC into a separate FPE
        module.
      - Add the dwmac driver support for T-HEAD TH1520 SoC
    - Synopsys (xpcs):
      - driver refactor and cleanup
    - TI:
      - icssg_prueth: add VLAN offload support
    - Xilinx emaclite:
      - adds clock support
 
  - Ethernet switches:
    - Microchip:
      - implement support for the lan969x Ethernet switch family
      - add LAN9646 switch support to KSZ DSA driver
 
  - Ethernet PHYs:
    - Marvel: 88q2x: enable auto negotiation
    - Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
 
  - PTP:
    - Add support for the Amazon virtual clock device
    - Add PtP driver for s390 clocks
 
  - WiFi:
    - mac80211
      - EHT 1024 aggregation size for transmissions
      - new operation to indicate that a new interface is to be added
      - support radio separation of multi-band devices
      - move wireless extension spy implementation to libiw
    - Broadcom:
      - brcmfmac: optional LPO clock support
    - Microchip:
      - add support for Atmel WILC3000
    - Qualcomm (ath12k):
      - firmware coredump collection support
      - add debugfs support for a multitude of statistics
    - Qualcomm (ath5k):
      -  Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
    - Realtek:
      - rtw88: 8821au and 8812au USB adapters support
      - rtw89: add thermal protection
      - rtw89: fine tune BT-coexsitence to improve user experience
      - rtw89: firmware secure boot for WiFi 6 chip
 
  - Bluetooth
      - add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
        0x13d3:0x3623
      - add Realtek RTL8852BE support for id Foxconn 0xe123
      - add MediaTek MT7920 support for wireless module ids
      - btintel_pcie: add handshake between driver and firmware
      - btintel_pcie: add recovery mechanism
      - btnxpuart: add GPIO support to power save feature
 
 Signed-off-by: Paolo Abeni <pabeni@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmc8sukSHHBhYmVuaUBy
 ZWRoYXQuY29tAAoJECkkeY3MjxOkLEYQAIMM6Qjh0bh3Byr3gOS1xZzXG+APLjP4
 9Jr0p3i+X53i90jvVqzeVO5FTc95MVHSKZ3kvPkDMXSLUaEJxocNHCI5Dzl/2/qL
 wWdpUB6/ou+jKB4Bn6Z8OvVODT7qrr0tVa9M2/fuKWrIsOU/ntIhG8EhnGddk5U/
 vKPSf5PUIb81uNRnF58VusY3wrT1dEoh9VfJYxL+ST+inPxjEAMy6Y+lmlsjGaSX
 jrS+Pp9KYiUwl3Qt0AQs+cG4OHkJdjbnChrfosWwpkiyddO8klVq06+wX/TiSzfF
 b9VZtBfy/GZs3lkE1mQkcILdtX5pP3YHQdpsuxFfVI0JHVszx2ck7WdoRux/8F0v
 kKZsYcO7bH9I1wMFP66Ff9hIbdEQaeucK+KdDkXyPNMfP91Vzmfjii8IBxOC36Ie
 BbOeFUrXyTxxJ2u0vf/X9JtIq8bcrkNrSd1n1jlGPMqG3FVzsY95+Oi4qfsyeUbl
 lS1PlVTqPMPFdX54HnxM3y2rJjhd7iXhkvmtuXNjRFThXlOiK3maAPWlM1aZ3b8u
 Vjs4JFUsW0tleZG+RzANjsGjXbf7AiPUGLZt+acem0K+fcjG4i5aGIAJrxwa/ORx
 eG74IZRt5cOI371W7gNLGHjwnuge8tFPgOWcRP2eozNm7jvMYALBejYS7eWUTvaf
 THcvVM+bupEZ
 =GzPr
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
 "The most significant set of changes is the per netns RTNL. The new
  behavior is disabled by default, regression risk should be contained.

  Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
  default value from PTP_1588_CLOCK_KVM, as the first is intended to be
  a more reliable replacement for the latter.

  Core:

   - Started a very large, in-progress, effort to make the RTNL lock
     scope per network-namespace, thus reducing the lock contention
     significantly in the containerized use-case, comprising:
       - RCU-ified some relevant slices of the FIB control path
       - introduce basic per netns locking helpers
       - namespacified the IPv4 address hash table
       - remove rtnl_register{,_module}() in favour of
         rtnl_register_many()
       - refactor rtnl_{new,del,set}link() moving as much validation as
         possible out of RTNL lock
       - convert all phonet doit() and dumpit() handlers to RCU
       - convert IPv4 addresses manipulation to per-netns RTNL
       - convert virtual interface creation to per-netns RTNL
     the per-netns lock infrastructure is guarded by the
     CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.

   - Introduce NAPI suspension, to efficiently switching between busy
     polling (NAPI processing suspended) and normal processing.

   - Migrate the IPv4 routing input, output and control path from direct
     ToS usage to DSCP macros. This is a work in progress to make ECN
     handling consistent and reliable.

   - Add drop reasons support to the IPv4 rotue input path, allowing
     better introspection in case of packets drop.

   - Make FIB seqnum lockless, dropping RTNL protection for read access.

   - Make inet{,v6} addresses hashing less predicable.

   - Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
     and timestamps

  Things we sprinkled into general kernel code:

   - Add small file operations for debugfs, to reduce the struct ops
     size.

   - Refactoring and optimization for the implementation of page_frag
     API, This is a preparatory work to consolidate the page_frag
     implementation.

  Netfilter:

   - Optimize set element transactions to reduce memory consumption

   - Extended netlink error reporting for attribute parser failure.

   - Make legacy xtables configs user selectable, giving users the
     option to configure iptables without enabling any other config.

   - Address a lot of false-positive RCU issues, pointed by recent CI
     improvements.

  BPF:

   - Put xsk sockets on a struct diet and add various cleanups. Overall,
     this helps to bump performance by 12% for some workloads.

   - Extend BPF selftests to increase coverage of XDP features in
     combination with BPF cpumap.

   - Optimize and homogenize bpf_csum_diff helper for all archs and also
     add a batch of new BPF selftests for it.

   - Extend netkit with an option to delegate skb->{mark,priority}
     scrubbing to its BPF program.

   - Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
     programs.

  Protocols:

   - Introduces 4-tuple hash for connected udp sockets, speeding-up
     significantly connected sockets lookup.

   - Add a fastpath for some TCP timers that usually expires after
     close, the socket lock contention.

   - Add inbound and outbound xfrm state caches to speed up state
     lookups.

   - Avoid sending MPTCP advertisements on stale subflows, reducing
     risks on loosing them.

   - Make neighbours table flushing more scalable, maintaining per
     device neigh lists.

  Driver API:

   - Introduce a unified interface to configure transmission H/W
     shaping, and expose it to user-space via generic-netlink.

   - Add support for per-NAPI config via netlink. This makes napi
     configuration persistent across queues removal and re-creation.
     Requires driver updates, currently supported drivers are:
     nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.

   - Add ethtool support for writing SFP / PHY firmware blocks.

   - Track RSS context allocation from ethtool core.

   - Implement support for mirroring to DSA CPU port, via TC mirror
     offload.

   - Consolidate FDB updates notification, to avoid duplicates on
     device-specific entries.

   - Expose DPLL clock quality level to the user-space.

   - Support master-slave PHY config via device tree.

  Tests and tooling:

   - forwarding: introduce deferred commands, to simplify the cleanup
     phase

  Drivers:

   - Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
     Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
     IRQs and queues to NAPI IDs, allowing busy polling and better
     introspection.

   - Ethernet high-speed NICs:
      - nVidia/Mellanox:
         - mlx5:
           - a large refactor to implement support for cross E-Switch
             scheduling
           - refactor H/W conter management to let it scale better
           - H/W GRO cleanups
      - Intel (100G, ice)::
         - add support for ethtool reset
         - implement support for per TX queue H/W shaping
      - AMD/Solarflare:
         - implement per device queue stats support
      - Broadcom (bnxt):
         - improve wildcard l4proto on IPv4/IPv6 ntuple rules
      - Marvell Octeon:
         - Add representor support for each Resource Virtualization Unit
           (RVU) device.
      - Hisilicon:
         - add support for the BMC Gigabit Ethernet
      - IBM (EMAC):
         - driver cleanup and modernization
      - Cisco (VIC):
         - raise the queues number limit to 256

   - Ethernet virtual:
      - Google vNIC:
         - implement page pool support
      - macsec:
         - inherit lower device's features and TSO limits when
           offloading
      - virtio_net:
         - enable premapped mode by default
         - support for XDP socket(AF_XDP) zerocopy TX
      - wireguard:
         - set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
           packets.

   - Ethernet NICs embedded and virtual:
      - Broadcom ASP:
         - enable software timestamping
      - Freescale:
         - add enetc4 PF driver
      - MediaTek: Airoha SoC:
         - implement BQL support
      - RealTek r8169:
         - enable TSO by default on r8168/r8125
         - implement extended ethtool stats
      - Renesas AVB:
         - enable TX checksum offload
      - Synopsys (stmmac):
         - support header splitting for vlan tagged packets
         - move common code for DWMAC4 and DWXGMAC into a separate FPE
           module.
         - add dwmac driver support for T-HEAD TH1520 SoC
      - Synopsys (xpcs):
         - driver refactor and cleanup
      - TI:
         - icssg_prueth: add VLAN offload support
      - Xilinx emaclite:
         - add clock support

   - Ethernet switches:
      - Microchip:
         - implement support for the lan969x Ethernet switch family
         - add LAN9646 switch support to KSZ DSA driver

   - Ethernet PHYs:
      - Marvel: 88q2x: enable auto negotiation
      - Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2

   - PTP:
      - Add support for the Amazon virtual clock device
      - Add PtP driver for s390 clocks

   - WiFi:
      - mac80211
         - EHT 1024 aggregation size for transmissions
         - new operation to indicate that a new interface is to be added
         - support radio separation of multi-band devices
         - move wireless extension spy implementation to libiw
      - Broadcom:
         - brcmfmac: optional LPO clock support
      - Microchip:
         - add support for Atmel WILC3000
      - Qualcomm (ath12k):
         - firmware coredump collection support
         - add debugfs support for a multitude of statistics
      - Qualcomm (ath5k):
         -  Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
      - Realtek:
         - rtw88: 8821au and 8812au USB adapters support
         - rtw89: add thermal protection
         - rtw89: fine tune BT-coexsitence to improve user experience
         - rtw89: firmware secure boot for WiFi 6 chip

   - Bluetooth
      - add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
        0x13d3:0x3623
      - add Realtek RTL8852BE support for id Foxconn 0xe123
      - add MediaTek MT7920 support for wireless module ids
      - btintel_pcie: add handshake between driver and firmware
      - btintel_pcie: add recovery mechanism
      - btnxpuart: add GPIO support to power save feature"

* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
  mm: page_frag: fix a compile error when kernel is not compiled
  Documentation: tipc: fix formatting issue in tipc.rst
  selftests: nic_performance: Add selftest for performance of NIC driver
  selftests: nic_link_layer: Add selftest case for speed and duplex states
  selftests: nic_link_layer: Add link layer selftest for NIC driver
  bnxt_en: Add FW trace coredump segments to the coredump
  bnxt_en: Add a new ethtool -W dump flag
  bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
  bnxt_en: Add functions to copy host context memory
  bnxt_en: Do not free FW log context memory
  bnxt_en: Manage the FW trace context memory
  bnxt_en: Allocate backing store memory for FW trace logs
  bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
  bnxt_en: Refactor bnxt_free_ctx_mem()
  bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
  bnxt_en: Update firmware interface spec to 1.10.3.85
  selftests/bpf: Add some tests with sockmap SK_PASS
  bpf: fix recursive lock when verdict program return SK_PASS
  wireguard: device: support big tcp GSO
  wireguard: selftests: load nf_conntrack if not present
  ...
2024-11-21 08:28:08 -08:00
Linus Torvalds
79caa6c88a asm-generic updates for 6.13
These are a number of unrelated cleanups, generally simplifying the
 architecture specific header files:
 
  - A series from Al Viro simplifies asm/vga.h, after it turns out that
    most of it can be generalized.
 
  - A series from Julian Vetter adds a common version of
    memcpy_{to,from}io() and memset_io() and changes most architectures
    to use that instead of their own implementation
 
  - A series from Niklas Schnelle concludes his work to make PC
    style inb()/outb() optional
 
  - Nicolas Pitre contributes improvements for the generic do_div()
    helper
 
  - Christoph Hellwig adds a generic version of page_to_phys()
    and phys_to_page(), replacing the slightly different architecture
    specific definitions.
 
  - Uwe Kleine-Koenig has a minor cleanup for ioctl definitions
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc+Z0gACgkQYKtH/8kJ
 UicqzA/8CcqVdcWKlFAyiFI62DCkd3iYm/joNK3/JhvUIvVFvY+HI0+XpTeOEN1r
 dfYBNg/KTVSbia5MEEy28Lk5WdoA3X7p9E8NuYC1ik/qvH3Y0kXDU2NiRcJDwalq
 u56tGUwDITFUzRo47a4Z53JpV60FlGaUVjuKp1jJiOQkcs/iussVYuti8mNVb1ud
 1tf21TEAIywq43IC8CxevIRsBkJBqMhalaGWYgKw3ZTwXdiKaXed6RH7IjPodanN
 6b7R6aFEqlT7usFX9vLOYNRGzd3HIueXOT1iqiiGI1lm5u/iutxKH+8eS4q381oN
 WJL0jQdo4sv2MxtSHYrjpzPRQpSp/qrin29h3PVjwBjZF3i5WvFeTYgfjQEEkqe0
 fpTXjUsr5n1F1pGV90DtJHwaD5TxKD4VYFLDRCDGUiAnWPkZ7EYUBL3SA6GqEkXB
 1lVRPsEBo0y867/WQcoCZA/x7ANZDI6bDZ6fjumwx8OCZOHZeN6FGtqQJHcVZR5O
 +nu/j3I8YH1tZGKbA+wliyQwt/T60Oxs62HHcFzFLGakARwUEDYO53IGCJUByFwk
 kCrgNVvzFklwWpqqyTADqb5lkQKpZr5gIdpst185qttCQkb+EFWiCi9w2inXTjHl
 2oCc7Uf0cvoxnhVlJAw73eGTtpqS37KCWK+iNyrQbOfy+hgIv+w=
 =zEHk
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic updates from Arnd Bergmann:
 "These are a number of unrelated cleanups, generally simplifying the
  architecture specific header files:

   - A series from Al Viro simplifies asm/vga.h, after it turns out that
     most of it can be generalized.

   - A series from Julian Vetter adds a common version of
     memcpy_{to,from}io() and memset_io() and changes most architectures
     to use that instead of their own implementation

   - A series from Niklas Schnelle concludes his work to make PC style
     inb()/outb() optional

   - Nicolas Pitre contributes improvements for the generic do_div()
     helper

   - Christoph Hellwig adds a generic version of page_to_phys() and
     phys_to_page(), replacing the slightly different architecture
     specific definitions.

   - Uwe Kleine-Koenig has a minor cleanup for ioctl definitions"

* tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits)
  empty include/asm-generic/vga.h
  sparc: get rid of asm/vga.h
  asm/vga.h: don't bother with scr_mem{cpy,move}v() unless we need to
  vt_buffer.h: get rid of dead code in default scr_...() instances
  tty: serial: export serial_8250_warn_need_ioport
  lib/iomem_copy: fix kerneldoc format style
  hexagon: simplify asm/io.h for !HAS_IOPORT
  loongarch: Use new fallback IO memcpy/memset
  csky: Use new fallback IO memcpy/memset
  arm64: Use new fallback IO memcpy/memset
  New implementation for IO memcpy and IO memset
  watchdog: Add HAS_IOPORT dependency for SBC8360 and SBC7240
  __arch_xprod64(): make __always_inline when optimizing for performance
  ARM: div64: improve __arch_xprod_64()
  asm-generic/div64: optimize/simplify __div64_const32()
  lib/math/test_div64: add some edge cases relevant to __div64_const32()
  asm-generic: add an optional pfn_valid check to page_to_phys
  asm-generic: provide generic page_to_phys and phys_to_page implementations
  asm-generic/io.h: Remove I/O port accessors for HAS_IOPORT=n
  tty: serial: handle HAS_IOPORT dependencies
  ...
2024-11-20 15:13:02 -08:00
Kiran K
acece9d1ca Bluetooth: btintel: Direct exception event to bluetooth stack
Have exception event part of HCI traces which helps for debug.

snoop traces:
> HCI Event: Vendor (0xff) plen 79
        Vendor Prefix (0x8780)
      Intel Extended Telemetry (0x03)
        Unknown extended telemetry event type (0xde)
        01 01 de
        Unknown extended subevent 0x07
        01 01 de 07 01 de 06 1c ef be ad de ef be ad de
        ef be ad de ef be ad de ef be ad de ef be ad de
        ef be ad de 05 14 ef be ad de ef be ad de ef be
        ad de ef be ad de ef be ad de 43 10 ef be ad de
        ef be ad de ef be ad de ef be ad de

Fixes: af395330ab ("Bluetooth: btintel: Add Intel devcoredump support")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14 15:40:55 -05:00
Andy Shevchenko
2de33a21a1 Bluetooth: hci_bcm: Use the devm_clk_get_optional() helper
Use devm_clk_get_optional() instead of hand writing it.
This saves some LoC and improves the semantic.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14 15:40:18 -05:00
Jiande Lu
de7dcf9d1d Bluetooth: btusb: Add 3 HWIDs for MT7925
Add below HWIDs for MediaTek MT7925 USB Bluetooth chip.
VID 0x0489, PID 0xe14f
VID 0x0489, PID 0xe150
VID 0x0489, PID 0xe151

Patch has been tested successfully and controller is recognized
device pair successfully.

MT7925 module bring up message as below.
Bluetooth: Core ver 2.22
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: hci0: HW/SW Version: 0x00000000, Build Time: 20240816133202
Bluetooth: hci0: Device setup in 286558 usecs
Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
Bluetooth: hci0: AOSP extensions version v1.00
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: MGMT ver 1.22
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11

Signed-off-by: Jiande Lu <jiande.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14 15:38:18 -05:00
Jonathan McCrohan
679cb60fd6 Bluetooth: btusb: Add new VID/PID 0489/e124 for MT7925
Add VID 0489 & PID e124 for MediaTek MT7925 USB Bluetooth chip.

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T:  Bus=01 Lev=01 Prnt=01 Port=08 Cnt=02 Dev#=  3 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e124 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
I:  If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14 15:37:59 -05:00
Hilda Wu
2dc98ac1cb Bluetooth: btrtl: Decrease HCI_OP_RESET timeout from 10 s to 2 s
The original timeout setting for HCI Reset on shutdown is 10 seconds.
HCI Reset shouldn't take 10 seconds to complete so instead use the
default timeout for commands.

Signed-off-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14 15:35:57 -05:00
Javier Carrasco
e42eec0f18 Bluetooth: btbcm: fix missing of_node_put() in btbcm_get_board_name()
of_find_node_by_path() returns a pointer to a device_node with its
refcount incremented, and a call to of_node_put() is required to
decrement the refcount again and avoid leaking the resource.

If 'of_property_read_string_index(root, "compatible", 0, &tmp)' fails,
the function returns without calling of_node_put(root) before doing so.

The automatic cleanup attribute can be used by means of the __free()
macro to automatically call of_node_put() when the variable goes out of
scope, fixing the issue and also accounting for new error paths.

Fixes: 63fac3343b ("Bluetooth: btbcm: Support per-board firmware variants")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14 15:35:40 -05:00
Hao Qin
faa5fd605d Bluetooth: btusb: Add new VID/PID 0489/e111 for MT7925
Add VID 0489 & PID e111 for MediaTek MT7925 USB Bluetooth chip.

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T:  Bus=02 Lev=02 Prnt=02 Port=04 Cnt=02 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e111 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
I:  If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

Signed-off-by: Hao Qin <hao.qin@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14 15:35:20 -05:00
Chris Lu
61c5a3def9 Bluetooth: btmtk: adjust the position to init iso data anchor
MediaTek iso data anchor init should be moved to where MediaTek
claims iso data interface.
If there is an unexpected BT usb disconnect during setup flow,
it will cause a NULL pointer crash issue when releasing iso
anchor since the anchor wasn't been init yet. Adjust the position
to do iso data anchor init.

[   17.137991] pc : usb_kill_anchored_urbs+0x60/0x168
[   17.137998] lr : usb_kill_anchored_urbs+0x44/0x168
[   17.137999] sp : ffffffc0890cb5f0
[   17.138000] x29: ffffffc0890cb5f0 x28: ffffff80bb6c2e80
[   17.144081] gpio gpiochip0: registered chardev handle for 1 lines
[   17.148421]  x27: 0000000000000000
[   17.148422] x26: ffffffd301ff4298 x25: 0000000000000003 x24: 00000000000000f0
[   17.148424] x23: 0000000000000000 x22: 00000000ffffffff x21: 0000000000000001
[   17.148425] x20: ffffffffffffffd8 x19: ffffff80c0f25560 x18: 0000000000000000
[   17.148427] x17: ffffffd33864e408 x16: ffffffd33808f7c8 x15: 0000000000200000
[   17.232789] x14: e0cd73cf80ffffff x13: 50f2137c0a0338c9 x12: 0000000000000001
[   17.239912] x11: 0000000080150011 x10: 0000000000000002 x9 : 0000000000000001
[   17.247035] x8 : 0000000000000000 x7 : 0000000000008080 x6 : 8080000000000000
[   17.254158] x5 : ffffffd33808ebc0 x4 : fffffffe033dcf20 x3 : 0000000080150011
[   17.261281] x2 : ffffff8087a91400 x1 : 0000000000000000 x0 : ffffff80c0f25588
[   17.268404] Call trace:
[   17.270841]  usb_kill_anchored_urbs+0x60/0x168
[   17.275274]  btusb_mtk_release_iso_intf+0x2c/0xd8 [btusb (HASH:5afe 6)]
[   17.284226]  btusb_mtk_disconnect+0x14/0x28 [btusb (HASH:5afe 6)]
[   17.292652]  btusb_disconnect+0x70/0x140 [btusb (HASH:5afe 6)]
[   17.300818]  usb_unbind_interface+0xc4/0x240
[   17.305079]  device_release_driver_internal+0x18c/0x258
[   17.310296]  device_release_driver+0x1c/0x30
[   17.314557]  bus_remove_device+0x140/0x160
[   17.318643]  device_del+0x1c0/0x330
[   17.322121]  usb_disable_device+0x80/0x180
[   17.326207]  usb_disconnect+0xec/0x300
[   17.329948]  hub_quiesce+0x80/0xd0
[   17.333339]  hub_disconnect+0x44/0x190
[   17.337078]  usb_unbind_interface+0xc4/0x240
[   17.341337]  device_release_driver_internal+0x18c/0x258
[   17.346551]  device_release_driver+0x1c/0x30
[   17.350810]  usb_driver_release_interface+0x70/0x88
[   17.355677]  proc_ioctl+0x13c/0x228
[   17.359157]  proc_ioctl_default+0x50/0x80
[   17.363155]  usbdev_ioctl+0x830/0xd08
[   17.366808]  __arm64_sys_ioctl+0x94/0xd0
[   17.370723]  invoke_syscall+0x6c/0xf8
[   17.374377]  el0_svc_common+0x84/0xe0
[   17.378030]  do_el0_svc+0x20/0x30
[   17.381334]  el0_svc+0x34/0x60
[   17.384382]  el0t_64_sync_handler+0x88/0xf0
[   17.388554]  el0t_64_sync+0x180/0x188
[   17.392208] Code: f9400677 f100a2f4 54fffea0 d503201f (b8350288)
[   17.398289] ---[ end trace 0000000000000000 ]---

Fixes: ceac1cb025 ("Bluetooth: btusb: mediatek: add ISO data transmission functions")
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14 15:35:00 -05:00
Philipp Stanner
41f4ff86e7 Bluetooth: btintel_pcie: Replace deprecated PCI functions
pcim_iomap_regions() and pcim_iomap_table() have been deprecated in
commit e354bb84a4 ("PCI: Deprecate pcim_iomap_table(),
pcim_iomap_regions_request_all()").

Replace these functions with pcim_iomap_region().

Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14 15:34:40 -05:00
Danil Pylaev
677a55ba11 Bluetooth: Set quirks for ATS2851
This adds quirks for broken ats2851 features.

Signed-off-by: Danil Pylaev <danstiv404@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14 15:34:18 -05:00
Colin Ian King
4900e041c3 Bluetooth: btintel_pcie: remove redundant assignment to variable ret
The variable ret is being assigned -ENOMEM however this is never
read and it is being re-assigned a new value when the code jumps
to label resubmit. The assignment is redundant and can be removed.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14 15:33:07 -05:00
Kiran K
510e8380b0 Bluetooth: btintel: Do no pass vendor events to stack
During firmware download, vendor specific events like boot up and
secure send result are generated. These events can be safely processed at
the driver level. Passing on these events to stack prints unnecessary
log as below.

    Bluetooth: hci0: Malformed MSFT vendor event: 0x02

Fixes: 3368aa357f ("Bluetooth: msft: Handle MSFT Monitor Device Event")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14 15:32:28 -05:00
Everest K.C.
9b49561f6c Bluetooth: btintel_pcie: Remove deadcode
The switch case statement has a default branch. Thus, the return
statement at the end of the function can never be reached.
Fix it by removing the return statement at the end of the
function.

This issue was reported by Coverity Scan.

Signed-off-by: Everest K.C. <everestkc@everestkc.com.np>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14 15:32:09 -05:00
Bartosz Golaszewski
c6256ec216 Bluetooth: hci_qca: use devm_clk_get_optional_enabled_with_rate()
Use the new devm_clk_get_optional_enabled_with_rate() clock helper to
shrink the code a bit.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14 15:31:50 -05:00
Kiran K
d88a8bb8bb Bluetooth: btintel: Add DSBR support for BlazarIW, BlazarU and GaP
Add DSBR support for BlazarIW, BlazarU and Gale Peak2 cores.

Refer commit eb9e749c01 ("Bluetooth: btintel: Allow configuring drive
strength of BRI") for details about DSBR.

Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14 15:31:30 -05:00
Chen-Yu Tsai
6d83d955f6 Bluetooth: btmtksdio: Lookup device node only as fallback
If the device tree is properly written, the SDIO function device node
should be correctly defined, and the mmc core in Linux should correctly
tie it to the device being probed.

Only fall back to searching for the device node by compatible if the
original device node tied to the device is incorrect, as seen in older
device trees.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14 15:31:12 -05:00
Kiran K
a430c2a10c Bluetooth: btintel_pcie: Add recovery mechanism
This patch adds a recovery mechanism to recover controller if firmware
download fails due to unresponsive controller, command timeout, firmware
signature verification failure etc. Driver attmepts maximum of 5 times
before giving up.

Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14 15:30:53 -05:00
Kiran K
05c200c8f0 Bluetooth: btintel_pcie: Add handshake between driver and firmware
The following handshake mechanism needs be followed after firmware
download is completed to bring the firmware to running state.

After firmware fragments of Operational image are downloaded and
secure sends result of the image succeeds,

1. Driver sends HCI Intel reset with boot option #1 to switch FW image.
2. FW sends Alive GP[0] MSIx
3. Driver enables data path (doorbell 0x460 for RBDs, etc...)
4. Driver gets Bootup event from firmware
5. Driver performs D0 entry to device (WRITE to IPC_Sleep_Control =0x0)
6. FW sends Alive GP[0] MSIx
7. Device host interface is fully set for BT protocol stack operation.
8. Driver may optionally get debug event with ID 0x97 which can be dropped

For Intermediate loadger image, all the above steps are applicable
expcept #5 and #6.

On HCI_OP_RESET, firmware raises alive interrupt. Driver needs to wait
for it before passing control over to bluetooth stack.

Co-developed-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com>
Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14 15:30:34 -05:00
Neeraj Sanjay Kale
c135a5bc34 Bluetooth: btnxpuart: Add GPIO support to power save feature
This adds support for driving the chip into sleep or wakeup with a GPIO.

If the device tree property device-wakeup-gpios is defined, the driver
utilizes this GPIO for controlling the chip's power save state, else it
uses the default UART-break method.

Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14 15:29:37 -05:00
Jiande Lu
a94bc93a30 Bluetooth: btusb: Add USB HW IDs for MT7920/MT7925
Add HW IDs for wireless module. These HW IDs are extracted from
Windows driver inf file and the test for card bring up successful.
MT7920 HW IDs test with below patch.
https://patchwork.kernel.org/project/bluetooth/
patch/20240930081257.23975-1-chris.lu@mediatek.com/

Patch has been tested successfully and controller is recognized
devices pair successfully.

MT7920 module bring up message as below.
Bluetooth: Core ver 2.22
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20240930111457
Bluetooth: hci0: Device setup in 143004 usecs
Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection
command is advertised, but not supported.
Bluetooth: hci0: AOSP extensions version v1.00
Bluetooth: hci0: AOSP quality report is supported
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: MGMT ver 1.22
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11

MT7925 module bring up message as below.
Bluetooth: Core ver 2.22
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: hci0: HW/SW Version: 0x00000000, Build Time: 20240816133202
Bluetooth: hci0: Device setup in 286558 usecs
Bluetooth: hci0: HCI Enhanced Setup Synchronous
Connection command is advertised, but not supported.
Bluetooth: hci0: AOSP extensions version v1.00
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: MGMT ver 1.22
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11

Signed-off-by: Jiande Lu <jiande.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14 15:28:44 -05:00
Hilda Wu
69b84ffce2 Bluetooth: btusb: Add RTL8852BE device 0489:e123 to device tables
Add the support ID 0489:e123 to usb_device_id table for
Realtek RTL8852B chip.

The device info from /sys/kernel/debug/usb/devices as below.

T:  Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#=  7 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e123 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14 15:28:25 -05:00
Yan Zhen
e623e2a066 bluetooth: Fix typos in the comments
Correctly spelled comments make it easier for the reader to understand
the code.

Fix typos:
'fragement' ==> 'fragment',
'genration' ==> 'generation',
'funciton' ==> 'function',
'Explitly' ==> 'Explicitly',
'explaination' ==> 'explanation',
'Tranlate' ==> 'Translate',
'immediatelly' ==> 'immediately',
'isntance' ==> 'instance',
'transmittion' ==> 'transmission',
'recevie' ==> 'receive',
'outselves' ==> 'ourselves',
'conrol' ==> 'control'.

Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14 15:28:07 -05:00
Neeraj Sanjay Kale
8c52d2f8dc Bluetooth: btnxpuart: Rename IW615 to IW610
This changes the chip name of IW615 to IW610.

IW610 (formerly called IW615) is yet to be released to broad market,
hence there is no issue of backward compatibility.

Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14 15:27:30 -05:00
Neeraj Sanjay Kale
c5da9bd6e8 Bluetooth: btnxpuart: Drop _v0 suffix from FW names
This updates all FW names by dropping the _v0 suffix.
Its been decided that all NXP BT/ WiFi FW names won't support _v0 suffix.
The suffix would be kept for next HW versions such as v1, v2 and so on,
which do not have backward compatible FW.

This change affects W8987, IW416 and IW615 chipsets, out of which new FW
files for W8987 and IW615 are yet to be released to broad market.

For IW416, old and new FW names are added to maintain backward
compatibility for existing customers.

Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14 15:27:12 -05:00