* Fix TCR_EL2 configuration to not use the ASID in TTBR1_EL2
and not mess-up T1SZ/PS by using the HCR_EL2.E2H==0 layout.
* Bring back the VMID allocation to the vcpu_load phase, ensuring
that we only setup VTTBR_EL2 once on VHE. This cures an ugly
race that would lead to running with an unallocated VMID.
RISC-V:
* Fix hart status check in SBI HSM extension
* Fix hart suspend_type usage in SBI HSM extension
* Fix error returned by SBI IPI and TIME extensions for
unsupported function IDs
* Fix suspend_type usage in SBI SUSP extension
* Remove unnecessary vcpu kick after injecting interrupt
via IMSIC guest file
x86:
* Fix an nVMX bug where KVM fails to detect that, after nested
VM-Exit, L1 has a pending IRQ (or NMI).
* To avoid freeing the PIC while vCPUs are still around, which
would cause a NULL pointer access with the previous patch,
destroy vCPUs before any VM-level destruction.
* Handle failures to create vhost_tasks
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmfCvVsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPqGwf9FOWQRd/yCKHiufjPDefD1Og0DmgB
Dgk0nmHxaxbyPw+5vYlhn/J3vZ54sNngBpmUekE5OuBMZ9EsxXAK/myByHkzNnV9
cyLm4vYwpb9OQmbQ5MMdDlptYsjV40EmSfwwIJpBxjdkwAI3f7NgeHvG8EwkJgch
C+X4JMrLu2+BGo7BUhuE/xrB8h0CBRnhalB5aK1wuF+ey8v06zcU0zdQCRLUpOsx
mW9S0OpSpSlecvcblr0AhuajjHjwFaTFOQofaXaQFBW6kv3dXmSq/JRABEfx0TBb
MTUDQtnnaYvPy/RWwZIzBpgfASLQNQNxSJ7DIw9C8IG7k6rK25BSRwTmSw==
=afMB
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix TCR_EL2 configuration to not use the ASID in TTBR1_EL2 and not
mess-up T1SZ/PS by using the HCR_EL2.E2H==0 layout.
- Bring back the VMID allocation to the vcpu_load phase, ensuring
that we only setup VTTBR_EL2 once on VHE. This cures an ugly race
that would lead to running with an unallocated VMID.
RISC-V:
- Fix hart status check in SBI HSM extension
- Fix hart suspend_type usage in SBI HSM extension
- Fix error returned by SBI IPI and TIME extensions for unsupported
function IDs
- Fix suspend_type usage in SBI SUSP extension
- Remove unnecessary vcpu kick after injecting interrupt via IMSIC
guest file
x86:
- Fix an nVMX bug where KVM fails to detect that, after nested
VM-Exit, L1 has a pending IRQ (or NMI).
- To avoid freeing the PIC while vCPUs are still around, which would
cause a NULL pointer access with the previous patch, destroy vCPUs
before any VM-level destruction.
- Handle failures to create vhost_tasks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: retry nx_huge_page_recovery_thread creation
vhost: return task creation error instead of NULL
KVM: nVMX: Process events on nested VM-Exit if injectable IRQ or NMI is pending
KVM: x86: Free vCPUs before freeing VM state
riscv: KVM: Remove unnecessary vcpu kick
KVM: arm64: Ensure a VMID is allocated before programming VTTBR_EL2
KVM: arm64: Fix tcr_el2 initialisation in hVHE mode
riscv: KVM: Fix SBI sleep_type use
riscv: KVM: Fix SBI TIME error generation
riscv: KVM: Fix SBI IPI error generation
riscv: KVM: Fix hart suspend_type use
riscv: KVM: Fix hart suspend status check
A VMM may send a non-fatal signal to its threads, including vCPU tasks,
at any time, and thus may signal vCPU tasks during KVM_RUN. If a vCPU
task receives the signal while its trying to spawn the huge page recovery
vhost task, then KVM_RUN will fail due to copy_process() returning
-ERESTARTNOINTR.
Rework call_once() to mark the call complete if and only if the called
function succeeds, and plumb the function's true error code back to the
call_once() invoker. This provides userspace with the correct, non-fatal
error code so that the VMM doesn't terminate the VM on -ENOMEM, and allows
subsequent KVM_RUN a succeed by virtue of retrying creation of the NX huge
page task.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
[implemented the kvm user side]
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-ID: <20250227230631.303431-3-kbusch@meta.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Lets callers distinguish why the vhost task creation failed. No one
currently cares why it failed, so no real runtime change from this
patch, but that will not be the case for long.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-ID: <20250227230631.303431-2-kbusch@meta.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fix conflicts between devicetree and ACPI SMP discovery & setup
- Fix a warm-boot lockup on AMD SC1100 SoC systems
- Fix a W=1 build warning related to x86 IRQ trace event setup
- Fix a kernel-doc warning
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ueF7
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix conflicts between devicetree and ACPI SMP discovery & setup
- Fix a warm-boot lockup on AMD SC1100 SoC systems
- Fix a W=1 build warning related to x86 IRQ trace event setup
- Fix a kernel-doc warning
* tag 'x86-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Fix kernel-doc warning
x86/irq: Define trace events conditionally
x86/CPU: Fix warm boot hang regression on AMD SC1100 SoC systems
x86/of: Don't use DTB for SMP setup if ACPI is enabled
Process pending events on nested VM-Exit if the vCPU has an injectable IRQ
or NMI, as the event may have become pending while L2 was active, i.e. may
not be tracked in the context of vmcs01. E.g. if L1 has passed its APIC
through to L2 and an IRQ arrives while L2 is active, then KVM needs to
request an IRQ window prior to running L1, otherwise delivery of the IRQ
will be delayed until KVM happens to process events for some other reason.
The missed failure is detected by vmx_apic_passthrough_tpr_threshold_test
in KVM-Unit-Tests, but has effectively been masked due to a flaw in KVM's
PIC emulation that causes KVM to make spurious KVM_REQ_EVENT requests (and
apparently no one ever ran the test with split IRQ chips).
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250224235542.2562848-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Free vCPUs before freeing any VM state, as both SVM and VMX may access
VM state when "freeing" a vCPU that is currently "in" L2, i.e. that needs
to be kicked out of nested guest mode.
Commit 6fcee03df6 ("KVM: x86: avoid loading a vCPU after .vm_destroy was
called") partially fixed the issue, but for unknown reasons only moved the
MMU unloading before VM destruction. Complete the change, and free all
vCPU state prior to destroying VM state, as nVMX accesses even more state
than nSVM.
In addition to the AVIC, KVM can hit a use-after-free on MSR filters:
kvm_msr_allowed+0x4c/0xd0
__kvm_set_msr+0x12d/0x1e0
kvm_set_msr+0x19/0x40
load_vmcs12_host_state+0x2d8/0x6e0 [kvm_intel]
nested_vmx_vmexit+0x715/0xbd0 [kvm_intel]
nested_vmx_free_vcpu+0x33/0x50 [kvm_intel]
vmx_free_vcpu+0x54/0xc0 [kvm_intel]
kvm_arch_vcpu_destroy+0x28/0xf0
kvm_vcpu_destroy+0x12/0x50
kvm_arch_destroy_vm+0x12c/0x1c0
kvm_put_kvm+0x263/0x3c0
kvm_vm_release+0x21/0x30
and an upcoming fix to process injectable interrupts on nested VM-Exit
will access the PIC:
BUG: kernel NULL pointer dereference, address: 0000000000000090
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
CPU: 23 UID: 1000 PID: 2658 Comm: kvm-nx-lpage-re
RIP: 0010:kvm_cpu_has_extint+0x2f/0x60 [kvm]
Call Trace:
<TASK>
kvm_cpu_has_injectable_intr+0xe/0x60 [kvm]
nested_vmx_vmexit+0x2d7/0xdf0 [kvm_intel]
nested_vmx_free_vcpu+0x40/0x50 [kvm_intel]
vmx_vcpu_free+0x2d/0x80 [kvm_intel]
kvm_arch_vcpu_destroy+0x2d/0x130 [kvm]
kvm_destroy_vcpus+0x8a/0x100 [kvm]
kvm_arch_destroy_vm+0xa7/0x1d0 [kvm]
kvm_destroy_vm+0x172/0x300 [kvm]
kvm_vcpu_release+0x31/0x50 [kvm]
Inarguably, both nSVM and nVMX need to be fixed, but punt on those
cleanups for the moment. Conceptually, vCPUs should be freed before VM
state. Assets like the I/O APIC and PIC _must_ be allocated before vCPUs
are created, so it stands to reason that they must be freed _after_ vCPUs
are destroyed.
Reported-by: Aaron Lewis <aaronlewis@google.com>
Closes: https://lore.kernel.org/all/20240703175618.2304869-2-aaronlewis@google.com
Cc: Jim Mattson <jmattson@google.com>
Cc: Yan Zhao <yan.y.zhao@intel.com>
Cc: Rick P Edgecombe <rick.p.edgecombe@intel.com>
Cc: Kai Huang <kai.huang@intel.com>
Cc: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250224235542.2562848-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add Arrow Lake U model for RAPL:
$ ls -1 /sys/devices/power/events/
energy-cores
energy-cores.scale
energy-cores.unit
energy-gpu
energy-gpu.scale
energy-gpu.unit
energy-pkg
energy-pkg.scale
energy-pkg.unit
energy-psys
energy-psys.scale
energy-psys.unit
The same output as ArrowLake:
$ perf stat -a -I 1000 --per-socket -e power/energy-pkg/
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20241224145516.349028-1-aaron.ma@canonical.com
When both of X86_LOCAL_APIC and X86_THERMAL_VECTOR are disabled,
the irq tracing produces a W=1 build warning for the tracing
definitions:
In file included from include/trace/trace_events.h:27,
from include/trace/define_trace.h:113,
from arch/x86/include/asm/trace/irq_vectors.h:383,
from arch/x86/kernel/irq.c:29:
include/trace/stages/init.h:2:23: error: 'str__irq_vectors__trace_system_name' defined but not used [-Werror=unused-const-variable=]
Make the tracepoints conditional on the same symbosl that guard
their usage.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250225213236.3141752-1-arnd@kernel.org
I still have some Soekris net4826 in a Community Wireless Network I
volunteer with. These devices use an AMD SC1100 SoC. I am running
OpenWrt on them, which uses a patched kernel, that naturally has
evolved over time. I haven't updated the ones in the field in a
number of years (circa 2017), but have one in a test bed, where I have
intermittently tried out test builds.
A few years ago, I noticed some trouble, particularly when "warm
booting", that is, doing a reboot without removing power, and noticed
the device was hanging after the kernel message:
[ 0.081615] Working around Cyrix MediaGX virtual DMA bugs.
If I removed power and then restarted, it would boot fine, continuing
through the message above, thusly:
[ 0.081615] Working around Cyrix MediaGX virtual DMA bugs.
[ 0.090076] Enable Memory-Write-back mode on Cyrix/NSC processor.
[ 0.100000] Enable Memory access reorder on Cyrix/NSC processor.
[ 0.100070] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.110058] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.120037] CPU: NSC Geode(TM) Integrated Processor by National Semi (family: 0x5, model: 0x9, stepping: 0x1)
[...]
In order to continue using modern tools, like ssh, to interact with
the software on these old devices, I need modern builds of the OpenWrt
firmware on the devices. I confirmed that the warm boot hang was still
an issue in modern OpenWrt builds (currently using a patched linux
v6.6.65).
Last night, I decided it was time to get to the bottom of the warm
boot hang, and began bisecting. From preserved builds, I narrowed down
the bisection window from late February to late May 2019. During this
period, the OpenWrt builds were using 4.14.x. I was able to build
using period-correct Ubuntu 18.04.6. After a number of bisection
iterations, I identified a kernel bump from 4.14.112 to 4.14.113 as
the commit that introduced the warm boot hang.
07aaa7e3d6
Looking at the upstream changes in the stable kernel between 4.14.112
and 4.14.113 (tig v4.14.112..v4.14.113), I spotted a likely suspect:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=20afb90f730982882e65b01fb8bdfe83914339c5
So, I tried reverting just that kernel change on top of the breaking
OpenWrt commit, and my warm boot hang went away.
Presumably, the warm boot hang is due to some register not getting
cleared in the same way that a loss of power does. That is
approximately as much as I understand about the problem.
More poking/prodding and coaching from Jonas Gorski, it looks
like this test patch fixes the problem on my board: Tested against
v6.6.67 and v4.14.113.
Fixes: 18fb053f9b ("x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors")
Debugged-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/CAHP3WfOgs3Ms4Z+L9i0-iBOE21sdMk5erAiJurPjnrL9LSsgRA@mail.gmail.com
Cc: Matthew Whitehead <tedheadster@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
There are cases when it is useful to use both ACPI and DTB provided by
the bootloader, however in such cases we should make sure to prevent
conflicts between the two. Namely, don't try to use DTB for SMP setup
if ACPI is enabled.
Precisely, this prevents at least:
- incorrectly calling register_lapic_address(APIC_DEFAULT_PHYS_BASE)
after the LAPIC was already successfully enumerated via ACPI, causing
noisy kernel warnings and probably potential real issues as well
- failed IOAPIC setup in the case when IOAPIC is enumerated via mptable
instead of ACPI (e.g. with acpi=noirq), due to
mpparse_parse_smp_config() overridden by x86_dtb_parse_smp_config()
Signed-off-by: Dmytro Maluka <dmaluka@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250105172741.3476758-2-dmaluka@chromium.org
Freqency mode is the current default mode of Linux perf. A period of 1 is
used as a starting period. The period is auto-adjusted on each tick or an
overflow, to meet the frequency target.
The start period of 1 is too low and may trigger some issues:
- Many HWs do not support period 1 well.
https://lore.kernel.org/lkml/875xs2oh69.ffs@tglx/
- For an event that occurs frequently, period 1 is too far away from the
real period. Lots of samples are generated at the beginning.
The distribution of samples may not be even.
- A low starting period for frequently occurring events also challenges
virtualization, which has a longer path to handle a PMI.
The limit_period value only checks the minimum acceptable value for HW.
It cannot be used to set the start period, because some events may
need a very low period. The limit_period cannot be set too high. It
doesn't help with the events that occur frequently.
It's hard to find a universal starting period for all events. The idea
implemented by this patch is to only give an estimate for the popular
HW and HW cache events. For the rest of the events, start from the lowest
possible recommended value.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250117151913.3043942-3-kan.liang@linux.intel.com
Perf doesn't work at low frequencies:
$ perf record -e cpu_core/instructions/ppp -F 120
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument)
for event (cpu_core/instructions/ppp).
"dmesg | grep -i perf" may provide additional information.
The limit_period() check avoids a low sampling period on a counter. It
doesn't intend to limit the frequency.
The check in the x86_pmu_hw_config() should be limited to non-freq mode.
The attr.sample_period and attr.sample_freq are union. The
attr.sample_period should not be used to indicate the frequency mode.
Fixes: c46e665f03 ("perf/x86: Add INST_RETIRED.ALL workarounds")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250117151913.3043942-1-kan.liang@linux.intel.com
Closes: https://lore.kernel.org/lkml/20250115154949.3147-1-ravi.bangoria@amd.com/
- Fix AVX-VNNI CPU feature dependency bug triggered via
the 'noxsave' boot option
- Fix typos in the SVA documentation
- Add Tony Luck as RDT co-maintainer and remove Fenghua Yu
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=CR8P
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix AVX-VNNI CPU feature dependency bug triggered via the 'noxsave'
boot option
- Fix typos in the SVA documentation
- Add Tony Luck as RDT co-maintainer and remove Fenghua Yu
* tag 'x86-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
docs: arch/x86/sva: Fix two grammar errors under Background and FAQ
x86/cpufeatures: Make AVX-VNNI depend on AVX
MAINTAINERS: Change maintainer for RDT
The 'noxsave' boot option disables support for AVX, but support for the
AVX-VNNI feature was still declared on CPUs that support it. Fix this.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250220060124.89622-1-ebiggers@kernel.org
According to the latest event list, update the event constraint tables
for Lion Cove core.
The general rule (the event codes < 0x90 are restricted to counters
0-3.) has been removed. There is no restriction for most of the
performance monitoring events.
Fixes: a932aa0e86 ("perf/x86: Add Lunar Lake and Arrow Lake support")
Reported-by: Amiri Khalil <amiri.khalil@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250219141005.2446823-1-kan.liang@linux.intel.com
handoff to the OS
- Check CPUID(0x23) leaf and subleafs presence properly
- Remove the PEBS-via-PT feature from being supported on hybrid systems
- Fix perf record/top default commands on systems without a raw PMU registered
-----BEGIN PGP SIGNATURE-----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=ThZf
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Borislav Petkov:
- Explicitly clear DEBUGCTL.LBR to prevent LBRs continuing being
enabled after handoff to the OS
- Check CPUID(0x23) leaf and subleafs presence properly
- Remove the PEBS-via-PT feature from being supported on hybrid systems
- Fix perf record/top default commands on systems without a raw PMU
registered
* tag 'perf_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Ensure LBRs are disabled when a CPU is starting
perf/x86/intel: Fix ARCH_PERFMON_NUM_COUNTER_LEAF
perf/x86/intel: Clean up PEBS-via-PT on hybrid
perf/x86/rapl: Fix the error checking order
- Large set of fixes for vector handling, specially in the interactions
between host and guest state. This fixes a number of bugs affecting
actual deployments, and greatly simplifies the FP/SIMD/SVE handling.
Thanks to Mark Rutland for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours.
- Fix use of kernel VAs at EL2 when emulating timers with nVHE.
- Small set of pKVM improvements and cleanups.
x86:
- Fix broken SNP support with KVM module built-in, ensuring the PSP
module is initialized before KVM even when the module infrastructure
cannot be used to order initcalls
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being emulated
by KVM to fix a NULL pointer dereference.
- Enter guest mode (L2) from KVM's perspective before initializing the vCPU's
nested NPT MMU so that the MMU is properly tagged for L2, not L1.
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as the
guest's value may be stale if a VM-Exit is handled in the fastpath.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmev2ykUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMvxwf/bw2u08moAYWAjJLROFvfiKXnznLS
iqJ2+jcw0lJ7wDqm4Zw8M5t74Rd+y5yzkLkZOyjav9yBB09zRkItiTHljCNMOQnt
2QptBa3CUN8N+rNnvVRt6dMkhw7z6n7eoFRSIDY2Y9PgiTapbFXPV1gFkMPO6+0f
SyF4LCr0iuDkJdvGAZJAH/Mp8nG6dv/A6a+Q+R1RkbKn9c2OdWw4VMfhIzimFGN6
0RFjbfXXvyO0aU/W/VHwvvuhcjGkAZWfHDdaTXqbvSMhayW562UPVMVBwXdVBmDj
Dk1gCKcbm4WyktbXYW6iOYj3MgdK96eI24ozps4R0aDexsrTRY4IfH4KEg==
=20Ql
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Large set of fixes for vector handling, especially in the
interactions between host and guest state.
This fixes a number of bugs affecting actual deployments, and
greatly simplifies the FP/SIMD/SVE handling. Thanks to Mark Rutland
for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours
- Fix use of kernel VAs at EL2 when emulating timers with nVHE
- Small set of pKVM improvements and cleanups
x86:
- Fix broken SNP support with KVM module built-in, ensuring the PSP
module is initialized before KVM even when the module
infrastructure cannot be used to order initcalls
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being
emulated by KVM to fix a NULL pointer dereference
- Enter guest mode (L2) from KVM's perspective before initializing
the vCPU's nested NPT MMU so that the MMU is properly tagged for
L2, not L1
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as
the guest's value may be stale if a VM-Exit is handled in the
fastpath"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
x86/sev: Fix broken SNP support with KVM module built-in
KVM: SVM: Ensure PSP module is initialized if KVM module is built-in
crypto: ccp: Add external API interface for PSP module initialization
KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic()
KVM: arm64: timer: Drop warning on failed interrupt signalling
KVM: arm64: Fix alignment of kvm_hyp_memcache allocations
KVM: arm64: Convert timer offset VA when accessed in HYP code
KVM: arm64: Simplify warning in kvm_arch_vcpu_load_fp()
KVM: arm64: Eagerly switch ZCR_EL{1,2}
KVM: arm64: Mark some header functions as inline
KVM: arm64: Refactor exit handlers
KVM: arm64: Refactor CPTR trap deactivation
KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN
KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN
KVM: arm64: Remove host FPSIMD saving for non-protected KVM
KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop
KVM: nSVM: Enter guest mode before initializing nested NPT MMU
KVM: selftests: Add CPUID tests for Hyper-V features that need in-kernel APIC
KVM: selftests: Manage CPUID array in Hyper-V CPUID test's core helper
...
- Align signal stack correctly
- Convert to raw spinlocks where needed (irq and virtio)
- FPU related fixes
-----BEGIN PGP SIGNATURE-----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=5mdK
-----END PGP SIGNATURE-----
Merge tag 'uml-for-linus-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML fixes from Richard Weinberger:
- Align signal stack correctly
- Convert to raw spinlocks where needed (irq and virtio)
- FPU related fixes
* tag 'uml-for-linus-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: convert irq_lock to raw spinlock
um: virtio_uml: use raw spinlock
um: virt-pci: don't use kmalloc()
um: fix execve stub execution on old host OSs
um: properly align signal stack on x86_64
um: avoid copying FP state from init_task
um: add back support for FXSAVE registers
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being emulated
by KVM to fix a NULL pointer dereference.
- Enter guest mode (L2) from KVM's perspective before initializing the vCPU's
nested NPT MMU so that the MMU is properly tagged for L2, not L1.
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as the
guest's value may be stale if a VM-Exit is handled in the fastpath.
-----BEGIN PGP SIGNATURE-----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=aFcV
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-fixes-6.14-rcN' of https://github.com/kvm-x86/linux into HEAD
KVM fixes for 6.14 part 1
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being emulated
by KVM to fix a NULL pointer dereference.
- Enter guest mode (L2) from KVM's perspective before initializing the vCPU's
nested NPT MMU so that the MMU is properly tagged for L2, not L1.
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as the
guest's value may be stale if a VM-Exit is handled in the fastpath.
Fix issues with enabling SNP host support and effectively SNP support
which is broken with respect to the KVM module being built-in.
SNP host support is enabled in snp_rmptable_init() which is invoked as
device_initcall(). SNP check on IOMMU is done during IOMMU PCI init
(IOMMU_PCI_INIT stage). And for that reason snp_rmptable_init() is
currently invoked via device_initcall() and cannot be invoked via
subsys_initcall() as core IOMMU subsystem gets initialized via
subsys_initcall().
Now, if kvm_amd module is built-in, it gets initialized before SNP host
support is enabled in snp_rmptable_init() :
[ 10.131811] kvm_amd: TSC scaling supported
[ 10.136384] kvm_amd: Nested Virtualization enabled
[ 10.141734] kvm_amd: Nested Paging enabled
[ 10.146304] kvm_amd: LBR virtualization supported
[ 10.151557] kvm_amd: SEV enabled (ASIDs 100 - 509)
[ 10.156905] kvm_amd: SEV-ES enabled (ASIDs 1 - 99)
[ 10.162256] kvm_amd: SEV-SNP enabled (ASIDs 1 - 99)
[ 10.171508] kvm_amd: Virtual VMLOAD VMSAVE supported
[ 10.177052] kvm_amd: Virtual GIF supported
...
...
[ 10.201648] kvm_amd: in svm_enable_virtualization_cpu
And then svm_x86_ops->enable_virtualization_cpu()
(svm_enable_virtualization_cpu) programs MSR_VM_HSAVE_PA as following:
wrmsrl(MSR_VM_HSAVE_PA, sd->save_area_pa);
So VM_HSAVE_PA is non-zero before SNP support is enabled on all CPUs.
snp_rmptable_init() gets invoked after svm_enable_virtualization_cpu()
as following :
...
[ 11.256138] kvm_amd: in svm_enable_virtualization_cpu
...
[ 11.264918] SEV-SNP: in snp_rmptable_init
This triggers a #GP exception in snp_rmptable_init() when snp_enable()
is invoked to set SNP_EN in SYSCFG MSR:
[ 11.294289] unchecked MSR access error: WRMSR to 0xc0010010 (tried to write 0x0000000003fc0000) at rIP: 0xffffffffaf5d5c28 (native_write_msr+0x8/0x30)
...
[ 11.294404] Call Trace:
[ 11.294482] <IRQ>
[ 11.294513] ? show_stack_regs+0x26/0x30
[ 11.294522] ? ex_handler_msr+0x10f/0x180
[ 11.294529] ? search_extable+0x2b/0x40
[ 11.294538] ? fixup_exception+0x2dd/0x340
[ 11.294542] ? exc_general_protection+0x14f/0x440
[ 11.294550] ? asm_exc_general_protection+0x2b/0x30
[ 11.294557] ? __pfx_snp_enable+0x10/0x10
[ 11.294567] ? native_write_msr+0x8/0x30
[ 11.294570] ? __snp_enable+0x5d/0x70
[ 11.294575] snp_enable+0x19/0x20
[ 11.294578] __flush_smp_call_function_queue+0x9c/0x3a0
[ 11.294586] generic_smp_call_function_single_interrupt+0x17/0x20
[ 11.294589] __sysvec_call_function+0x20/0x90
[ 11.294596] sysvec_call_function+0x80/0xb0
[ 11.294601] </IRQ>
[ 11.294603] <TASK>
[ 11.294605] asm_sysvec_call_function+0x1f/0x30
...
[ 11.294631] arch_cpu_idle+0xd/0x20
[ 11.294633] default_idle_call+0x34/0xd0
[ 11.294636] do_idle+0x1f1/0x230
[ 11.294643] ? complete+0x71/0x80
[ 11.294649] cpu_startup_entry+0x30/0x40
[ 11.294652] start_secondary+0x12d/0x160
[ 11.294655] common_startup_64+0x13e/0x141
[ 11.294662] </TASK>
This #GP exception is getting triggered due to the following errata for
AMD family 19h Models 10h-1Fh Processors:
Processor may generate spurious #GP(0) Exception on WRMSR instruction:
Description:
The Processor will generate a spurious #GP(0) Exception on a WRMSR
instruction if the following conditions are all met:
- the target of the WRMSR is a SYSCFG register.
- the write changes the value of SYSCFG.SNPEn from 0 to 1.
- One of the threads that share the physical core has a non-zero
value in the VM_HSAVE_PA MSR.
The document being referred to above:
https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/revision-guides/57095-PUB_1_01.pdf
To summarize, with kvm_amd module being built-in, KVM/SVM initialization
happens before host SNP is enabled and this SVM initialization
sets VM_HSAVE_PA to non-zero, which then triggers a #GP when
SYSCFG.SNPEn is being set and this will subsequently cause
SNP_INIT(_EX) to fail with INVALID_CONFIG error as SYSCFG[SnpEn] is not
set on all CPUs.
Essentially SNP host enabling code should be invoked before KVM
initialization, which is currently not the case when KVM is built-in.
Add fix to call snp_rmptable_init() early from iommu_snp_enable()
directly and not invoked via device_initcall() which enables SNP host
support before KVM initialization with kvm_amd module built-in.
Add additional handling for `iommu=off` or `amd_iommu=off` options.
Note that IOMMUs need to be enabled for SNP initialization, therefore,
if host SNP support is enabled but late IOMMU initialization fails
then that will cause PSP driver's SNP_INIT to fail as IOMMU SNP sanity
checks in SNP firmware will fail with invalid configuration error as
below:
[ 9.723114] ccp 0000:23:00.1: sev enabled
[ 9.727602] ccp 0000:23:00.1: psp enabled
[ 9.732527] ccp 0000:a2:00.1: enabling device (0000 -> 0002)
[ 9.739098] ccp 0000:a2:00.1: no command queues available
[ 9.745167] ccp 0000:a2:00.1: psp enabled
[ 9.805337] ccp 0000:23:00.1: SEV-SNP: failed to INIT rc -5, error 0x3
[ 9.866426] ccp 0000:23:00.1: SEV API:1.53 build:5
Fixes: c3b86e61b7 ("x86/cpufeatures: Enable/unmask SEV-SNP CPU feature")
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Message-ID: <138b520fb83964782303b43ade4369cd181fdd9c.1739226950.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The kernel's initcall infrastructure lacks the ability to express
dependencies between initcalls, whereas the modules infrastructure
automatically handles dependencies via symbol loading. Ensure the
PSP SEV driver is initialized before proceeding in sev_hardware_setup()
if KVM is built-in as the dependency isn't handled by the initcall
infrastructure.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <f78ddb64087df27e7bcb1ae0ab53f55aa0804fab.1739226950.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZ672+AAKCRCAXGG7T9hj
vqnNAP99iQfUC5je/UYE4k9ku0oRD9+d65G5YCmnLv5egUOuTgD/UT+N0LYaahS7
5hRh61sicj57dsrN4kA4U4TpVvoFsAY=
=CUIl
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.14-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Three fixes to xen-swiotlb driver:
- two fixes for issues coming up due to another fix in 6.12
- addition of an __init annotation"
* tag 'for-linus-6.14-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Xen/swiotlb: mark xen_swiotlb_fixup() __init
x86/xen: allow larger contiguous memory regions in PV guests
xen/swiotlb: relax alignment requirements
Today a PV guest (including dom0) can create 2MB contiguous memory
regions for DMA buffers at max. This has led to problems at least
with the megaraid_sas driver, which wants to allocate a 2.3MB DMA
buffer.
The limiting factor is the frame array used to do the hypercall for
making the memory contiguous, which has 512 entries and is just a
static array in mmu_pv.c.
In order to not waste memory for non-PV guests, put the initial
frame array into .init.data section and dynamically allocate an array
from the .init_after_bootmem hook of PV guests.
In case a contiguous memory area larger than the initially supported
2MB is requested, allocate a larger buffer for the frame list. Note
that such an allocation is tried only after memory management has been
initialized properly, which is tested via a flag being set in the
.init_after_bootmem hook.
Fixes: 9f40ec84a7 ("xen/swiotlb: add alignment check for dma buffers")
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Alan Robinson <Alan.Robinson@fujitsu.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
The stack needs to be properly aligned so 16 byte memory accesses on the
stack are correct. This was broken when introducing the dynamic math
register sizing as the rounding was not moved appropriately.
Fixes: 3f17fed214 ("um: switch to regset API and depend on XSTATE")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20250107133509.265576-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
It was reported that qemu may not enable the XSTATE CPU extension, which
is a requirement after commit 3f17fed214 ("um: switch to regset API
and depend on XSTATE"). Add a fallback to use FXSAVE (FP registers on
x86_64 and XFP on i386) which is just a shorter version of the same
data. The only difference is that the XSTATE magic should not be set in
the signal frame.
Note that this still drops support for the older i386 FP register layout
as supporting this would require more backward compatibility to build a
correct signal frame.
Fixes: 3f17fed214 ("um: switch to regset API and depend on XSTATE")
Reported-by: SeongJae Park <sj@kernel.org>
Closes: https://lore.kernel.org/r/20241203070218.240797-1-sj@kernel.org
Tested-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20241204074827.1582917-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Move the conditional loading of hardware DR6 with the guest's DR6 value
out of the core .vcpu_run() loop to fix a bug where KVM can load hardware
with a stale vcpu->arch.dr6.
When the guest accesses a DR and host userspace isn't debugging the guest,
KVM disables DR interception and loads the guest's values into hardware on
VM-Enter and saves them on VM-Exit. This allows the guest to access DRs
at will, e.g. so that a sequence of DR accesses to configure a breakpoint
only generates one VM-Exit.
For DR0-DR3, the logic/behavior is identical between VMX and SVM, and also
identical between KVM_DEBUGREG_BP_ENABLED (userspace debugging the guest)
and KVM_DEBUGREG_WONT_EXIT (guest using DRs), and so KVM handles loading
DR0-DR3 in common code, _outside_ of the core kvm_x86_ops.vcpu_run() loop.
But for DR6, the guest's value doesn't need to be loaded into hardware for
KVM_DEBUGREG_BP_ENABLED, and SVM provides a dedicated VMCB field whereas
VMX requires software to manually load the guest value, and so loading the
guest's value into DR6 is handled by {svm,vmx}_vcpu_run(), i.e. is done
_inside_ the core run loop.
Unfortunately, saving the guest values on VM-Exit is initiated by common
x86, again outside of the core run loop. If the guest modifies DR6 (in
hardware, when DR interception is disabled), and then the next VM-Exit is
a fastpath VM-Exit, KVM will reload hardware DR6 with vcpu->arch.dr6 and
clobber the guest's actual value.
The bug shows up primarily with nested VMX because KVM handles the VMX
preemption timer in the fastpath, and the window between hardware DR6
being modified (in guest context) and DR6 being read by guest software is
orders of magnitude larger in a nested setup. E.g. in non-nested, the
VMX preemption timer would need to fire precisely between #DB injection
and the #DB handler's read of DR6, whereas with a KVM-on-KVM setup, the
window where hardware DR6 is "dirty" extends all the way from L1 writing
DR6 to VMRESUME (in L1).
L1's view:
==========
<L1 disables DR interception>
CPU 0/KVM-7289 [023] d.... 2925.640961: kvm_entry: vcpu 0
A: L1 Writes DR6
CPU 0/KVM-7289 [023] d.... 2925.640963: <hack>: Set DRs, DR6 = 0xffff0ff1
B: CPU 0/KVM-7289 [023] d.... 2925.640967: kvm_exit: vcpu 0 reason EXTERNAL_INTERRUPT intr_info 0x800000ec
D: L1 reads DR6, arch.dr6 = 0
CPU 0/KVM-7289 [023] d.... 2925.640969: <hack>: Sync DRs, DR6 = 0xffff0ff0
CPU 0/KVM-7289 [023] d.... 2925.640976: kvm_entry: vcpu 0
L2 reads DR6, L1 disables DR interception
CPU 0/KVM-7289 [023] d.... 2925.640980: kvm_exit: vcpu 0 reason DR_ACCESS info1 0x0000000000000216
CPU 0/KVM-7289 [023] d.... 2925.640983: kvm_entry: vcpu 0
CPU 0/KVM-7289 [023] d.... 2925.640983: <hack>: Set DRs, DR6 = 0xffff0ff0
L2 detects failure
CPU 0/KVM-7289 [023] d.... 2925.640987: kvm_exit: vcpu 0 reason HLT
L1 reads DR6 (confirms failure)
CPU 0/KVM-7289 [023] d.... 2925.640990: <hack>: Sync DRs, DR6 = 0xffff0ff0
L0's view:
==========
L2 reads DR6, arch.dr6 = 0
CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216
CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216
L2 => L1 nested VM-Exit
CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit_inject: reason: DR_ACCESS ext_inf1: 0x0000000000000216
CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_entry: vcpu 23
CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_exit: vcpu 23 reason VMREAD
CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_entry: vcpu 23
CPU 23/KVM-5046 [001] d.... 3410.005612: kvm_exit: vcpu 23 reason VMREAD
CPU 23/KVM-5046 [001] d.... 3410.005612: kvm_entry: vcpu 23
L1 writes DR7, L0 disables DR interception
CPU 23/KVM-5046 [001] d.... 3410.005612: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000007
CPU 23/KVM-5046 [001] d.... 3410.005613: kvm_entry: vcpu 23
L0 writes DR6 = 0 (arch.dr6)
CPU 23/KVM-5046 [001] d.... 3410.005613: <hack>: Set DRs, DR6 = 0xffff0ff0
A: <L1 writes DR6 = 1, no interception, arch.dr6 is still '0'>
B: CPU 23/KVM-5046 [001] d.... 3410.005614: kvm_exit: vcpu 23 reason PREEMPTION_TIMER
CPU 23/KVM-5046 [001] d.... 3410.005614: kvm_entry: vcpu 23
C: L0 writes DR6 = 0 (arch.dr6)
CPU 23/KVM-5046 [001] d.... 3410.005614: <hack>: Set DRs, DR6 = 0xffff0ff0
L1 => L2 nested VM-Enter
CPU 23/KVM-5046 [001] d.... 3410.005616: kvm_exit: vcpu 23 reason VMRESUME
L0 reads DR6, arch.dr6 = 0
Reported-by: John Stultz <jstultz@google.com>
Closes: https://lkml.kernel.org/r/CANDhNCq5_F3HfFYABqFGCA1bPd_%2BxgNj-iDQhH4tDk%2Bwi8iZZg%40mail.gmail.com
Fixes: 375e28ffc0 ("KVM: X86: Set host DR6 only on VMX and for KVM_DEBUGREG_WONT_EXIT")
Fixes: d67668e9dd ("KVM: x86, SVM: isolate vcpu->arch.dr6 from vmcb->save.dr6")
Cc: stable@vger.kernel.org
Cc: Jim Mattson <jmattson@google.com>
Tested-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/20250125011833.3644371-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When preparing vmcb02 for nested VMRUN (or state restore), "enter" guest
mode prior to initializing the MMU for nested NPT so that guest_mode is
set in the MMU's role. KVM's model is that all L2 MMUs are tagged with
guest_mode, as the behavior of hypervisor MMUs tends to be significantly
different than kernel MMUs.
Practically speaking, the bug is relatively benign, as KVM only directly
queries role.guest_mode in kvm_mmu_free_guest_mode_roots() and
kvm_mmu_page_ad_need_write_protect(), which SVM doesn't use, and in paths
that are optimizations (mmu_page_zap_pte() and
shadow_mmu_try_split_huge_pages()).
And while the role is incorprated into shadow page usage, because nested
NPT requires KVM to be using NPT for L1, reusing shadow pages across L1
and L2 is impossible as L1 MMUs will always have direct=1, while L2 MMUs
will have direct=0.
Hoist the TLB processing and setting of HF_GUEST_MASK to the beginning
of the flow instead of forcing guest_mode in the MMU, as nothing in
nested_vmcb02_prepare_control() between the old and new locations touches
TLB flush requests or HF_GUEST_MASK, i.e. there's no reason to present
inconsistent vCPU state to the MMU.
Fixes: 69cb877487 ("KVM: nSVM: move MMU setup to nested_prepare_vmcb_control")
Cc: stable@vger.kernel.org
Reported-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Reviewed-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://lore.kernel.org/r/20250130010825.220346-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Advertise support for Hyper-V's SEND_IPI and SEND_IPI_EX hypercalls if and
only if the local API is emulated/virtualized by KVM, and explicitly reject
said hypercalls if the local APIC is emulated in userspace, i.e. don't rely
on userspace to opt-in to KVM_CAP_HYPERV_ENFORCE_CPUID.
Rejecting SEND_IPI and SEND_IPI_EX fixes a NULL-pointer dereference if
Hyper-V enlightenments are exposed to the guest without an in-kernel local
APIC:
dump_stack+0xbe/0xfd
__kasan_report.cold+0x34/0x84
kasan_report+0x3a/0x50
__apic_accept_irq+0x3a/0x5c0
kvm_hv_send_ipi.isra.0+0x34e/0x820
kvm_hv_hypercall+0x8d9/0x9d0
kvm_emulate_hypercall+0x506/0x7e0
__vmx_handle_exit+0x283/0xb60
vmx_handle_exit+0x1d/0xd0
vcpu_enter_guest+0x16b0/0x24c0
vcpu_run+0xc0/0x550
kvm_arch_vcpu_ioctl_run+0x170/0x6d0
kvm_vcpu_ioctl+0x413/0xb20
__se_sys_ioctl+0x111/0x160
do_syscal1_64+0x30/0x40
entry_SYSCALL_64_after_hwframe+0x67/0xd1
Note, checking the sending vCPU is sufficient, as the per-VM irqchip_mode
can't be modified after vCPUs are created, i.e. if one vCPU has an
in-kernel local APIC, then all vCPUs have an in-kernel local APIC.
Reported-by: Dongjie Zou <zoudongjie@huawei.com>
Fixes: 214ff83d44 ("KVM: x86: hyperv: implement PV IPI send hypercalls")
Fixes: 2bc39970e9 ("x86/kvm/hyper-v: Introduce KVM_GET_SUPPORTED_HV_CPUID")
Cc: stable@vger.kernel.org
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250118003454.2619573-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
In [1] the meaning of the synthetic IBPB flags has been redefined for a
better separation of concerns:
- ENTRY_IBPB -- issue IBPB on entry only
- IBPB_ON_VMEXIT -- issue IBPB on VM-Exit only
and the Retbleed mitigations have been updated to match this new
semantics.
Commit [2] was merged shortly before [1], and their interaction was not
handled properly. This resulted in IBPB not being triggered on VM-Exit
in all SRSO mitigation configs requesting an IBPB there.
Specifically, an IBPB on VM-Exit is triggered only when
X86_FEATURE_IBPB_ON_VMEXIT is set. However:
- X86_FEATURE_IBPB_ON_VMEXIT is not set for "spec_rstack_overflow=ibpb",
because before [1] having X86_FEATURE_ENTRY_IBPB was enough. Hence,
an IBPB is triggered on entry but the expected IBPB on VM-exit is
not.
- X86_FEATURE_IBPB_ON_VMEXIT is not set also when
"spec_rstack_overflow=ibpb-vmexit" if X86_FEATURE_ENTRY_IBPB is
already set.
That's because before [1] this was effectively redundant. Hence, e.g.
a "retbleed=ibpb spec_rstack_overflow=bpb-vmexit" config mistakenly
reports the machine still vulnerable to SRSO, despite an IBPB being
triggered both on entry and VM-Exit, because of the Retbleed selected
mitigation config.
- UNTRAIN_RET_VM won't still actually do anything unless
CONFIG_MITIGATION_IBPB_ENTRY is set.
For "spec_rstack_overflow=ibpb", enable IBPB on both entry and VM-Exit
and clear X86_FEATURE_RSB_VMEXIT which is made superfluous by
X86_FEATURE_IBPB_ON_VMEXIT. This effectively makes this mitigation
option similar to the one for 'retbleed=ibpb', thus re-order the code
for the RETBLEED_MITIGATION_IBPB option to be less confusing by having
all features enabling before the disabling of the not needed ones.
For "spec_rstack_overflow=ibpb-vmexit", guard this mitigation setting
with CONFIG_MITIGATION_IBPB_ENTRY to ensure UNTRAIN_RET_VM sequence is
effectively compiled in. Drop instead the CONFIG_MITIGATION_SRSO guard,
since none of the SRSO compile cruft is required in this configuration.
Also, check only that the required microcode is present to effectively
enabled the IBPB on VM-Exit.
Finally, update the KConfig description for CONFIG_MITIGATION_IBPB_ENTRY
to list also all SRSO config settings enabled by this guard.
Fixes: 864bcaa38e ("x86/cpu/kvm: Provide UNTRAIN_RET_VM") [1]
Fixes: d893832d0e ("x86/srso: Add IBPB on VMEXIT") [2]
Reported-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Patrick Bellasi <derkling@google.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Correctly clean the BSS to the PoC before allowing EL2 to access it
on nVHE/hVHE/protected configurations
* Propagate ownership of debug registers in protected mode after
the rework that landed in 6.14-rc1
* Stop pretending that we can run the protected mode without a GICv3
being present on the host
* Fix a use-after-free situation that can occur if a vcpu fails to
initialise the NV shadow S2 MMU contexts
* Always evaluate the need to arm a background timer for fully emulated
guest timers
* Fix the emulation of EL1 timers in the absence of FEAT_ECV
* Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0
s390:
* move some of the guest page table (gmap) logic into KVM itself,
inching towards the final goal of completely removing gmap from the
non-kvm memory management code. As an initial set of cleanups, move
some code from mm/gmap into kvm and start using __kvm_faultin_pfn()
to fault-in pages as needed; but especially stop abusing page->index
and page->lru to aid in the pgdesc conversion.
x86:
* Add missing check in the fix to defer starting the huge page recovery
vhost_task
* SRSO_USER_KERNEL_NO does not need SYNTHESIZED_F
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmemTnEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP97gf/Rew+yEsRrHVk/j0R2XwFx51raYZy
eaicv07jYmwsnaALq6BEj4xxDW8dJEJgj05Czm1o9+9x8nvY2+UjT2q4J8fY9xdD
Yr+5GvEEz4x2GNL3ZYE3iHTNFQckNxOgMilLW3br1E+wjusShKmgGxPYTRyClQ34
gDBZQWzOG22UNC6PbW9dgTK54b57+NJdIZYuHz4LkMsTvzf6jXo5VumsgbbZqC4e
VGh5EUEPL7+cNzGY/+WURXI6OojdPzbneH1NP82uT3lo2WaHK9+B3N6H+W71N/T4
u1P7+g0WmdNj3FITvDpTJ7jNhke2atEjI9rvtHz6gwtf9SIujyuNl55uRA==
=r0h9
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Correctly clean the BSS to the PoC before allowing EL2 to access it
on nVHE/hVHE/protected configurations
- Propagate ownership of debug registers in protected mode after the
rework that landed in 6.14-rc1
- Stop pretending that we can run the protected mode without a GICv3
being present on the host
- Fix a use-after-free situation that can occur if a vcpu fails to
initialise the NV shadow S2 MMU contexts
- Always evaluate the need to arm a background timer for fully
emulated guest timers
- Fix the emulation of EL1 timers in the absence of FEAT_ECV
- Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0
s390:
- move some of the guest page table (gmap) logic into KVM itself,
inching towards the final goal of completely removing gmap from the
non-kvm memory management code.
As an initial set of cleanups, move some code from mm/gmap into kvm
and start using __kvm_faultin_pfn() to fault-in pages as needed;
but especially stop abusing page->index and page->lru to aid in the
pgdesc conversion.
x86:
- Add missing check in the fix to defer starting the huge page
recovery vhost_task
- SRSO_USER_KERNEL_NO does not need SYNTHESIZED_F"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (31 commits)
KVM: x86/mmu: Ensure NX huge page recovery thread is alive before waking
KVM: remove kvm_arch_post_init_vm
KVM: selftests: Fix spelling mistake "initally" -> "initially"
kvm: x86: SRSO_USER_KERNEL_NO is not synthesized
KVM: arm64: timer: Don't adjust the EL2 virtual timer offset
KVM: arm64: timer: Correctly handle EL1 timer emulation when !FEAT_ECV
KVM: arm64: timer: Always evaluate the need for a soft timer
KVM: arm64: Fix nested S2 MMU structures reallocation
KVM: arm64: Fail protected mode init if no vgic hardware is present
KVM: arm64: Flush/sync debug state in protected mode
KVM: s390: selftests: Streamline uc_skey test to issue iske after sske
KVM: s390: remove the last user of page->index
KVM: s390: move PGSTE softbits
KVM: s390: remove useless page->index usage
KVM: s390: move gmap_shadow_pgt_lookup() into kvm
KVM: s390: stop using lists to keep track of used dat tables
KVM: s390: stop using page->index for non-shadow gmaps
KVM: s390: move some gmap shadowing functions away from mm/gmap.c
KVM: s390: get rid of gmap_translate()
KVM: s390: get rid of gmap_fault()
...
GCC changing the default C version that is overriden
in the main Makefile but not in the x86 boot code
Makefile.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=x1bT
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix a build regression on GCC 15 builds, caused by GCC changing the
default C version that is overriden in the main Makefile but not in
the x86 boot code Makefile"
* tag 'x86-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Use '-std=gnu11' to fix build with GCC 15
Explicitly clear DEBUGCTL.LBR when a CPU is starting, prior to purging the
LBR MSRs themselves, as at least one system has been found to transfer
control to the kernel with LBRs enabled (it's unclear whether it's a BIOS
flaw or a CPU goof). Because the kernel preserves the original DEBUGCTL,
even when toggling LBRs, leaving DEBUGCTL.LBR as is results in running
with LBRs enabled at all times.
Closes: https://lore.kernel.org/all/c9d8269bff69f6359731d758e3b1135dedd7cc61.camel@redhat.com
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250131010721.470503-1-seanjc@google.com
The EAX of the CPUID Leaf 023H enumerates the mask of valid sub-leaves.
To tell the availability of the sub-leaf 1 (enumerate the counter mask),
perf should check the bit 1 (0x2) of EAS, rather than bit 0 (0x1).
The error is not user-visible on bare metal. Because the sub-leaf 0 and
the sub-leaf 1 are always available. However, it may bring issues in a
virtualization environment when a VMM only enumerates the sub-leaf 0.
Introduce the cpuid35_e?x to replace the macros, which makes the
implementation style consistent.
Fixes: eb467aaac2 ("perf/x86/intel: Support Architectural PerfMon Extension leaf")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250129154820.3755948-3-kan.liang@linux.intel.com
The PEBS-via-PT feature is exposed for the e-core of some hybrid
platforms, e.g., ADL and MTL. But it never works.
$ dmesg | grep PEBS
[ 1.793888] core: cpu_atom PMU driver: PEBS-via-PT
$ perf record -c 1000 -e '{intel_pt/branch=0/,
cpu_atom/cpu-cycles,aux-output/pp}' -C8
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument)
for event (cpu_atom/cpu-cycles,aux-output/pp).
"dmesg | grep -i perf" may provide additional information.
The "PEBS-via-PT" is printed if the corresponding bit of per-PMU
capabilities is set. Since the feature is supported by the e-core HW,
perf sets the bit for e-core. However, for Intel PT, if a feature is not
supported on all CPUs, it is not supported at all. The PEBS-via-PT event
cannot be created successfully.
The PEBS-via-PT is no longer enumerated on the latest hybrid platform. It
will be deprecated on future platforms with Arch PEBS. Let's remove it
from the existing hybrid platforms.
Fixes: d9977c43bf ("perf/x86: Register hybrid PMUs")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250129154820.3755948-2-kan.liang@linux.intel.com
After the commit b4943b8bfc ("perf/x86/rapl: Add core energy counter
support for AMD CPUs"), the default "perf record"/"perf top" command is
broken in systems where there isn't a PMU registered for type
PERF_TYPE_RAW.
This is due to the change in order of error checks in rapl_pmu_event_init()
Due to which we return -EINVAL instead of -ENOENT, when we reach here from
the fallback loop in perf_init_event().
Move the "PMU and event type match" back to the beginning of the function
so that we return -ENOENT early on.
Closes: https://lore.kernel.org/all/uv7mz6vew2bzgre5jdpmwldxljp5djzmuiksqdcdwipfm4zm7w@ribobcretidk/
Fixes: b4943b8bfc ("perf/x86/rapl: Add core energy counter support for AMD CPUs")
Reported-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250129080513.30353-1-dhananjay.ugwekar@amd.com
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZ6Ti7AAKCRCAXGG7T9hj
vqTVAP4iQCeMzxPJoHteWm9ihOyIpHZ+5Kimhle/irUmAYC5OwD/St7EdmY3MiZd
sMRNrW3dFBvOQkgnysRw7OOaP8GUfgY=
=DT9D
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.14-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Three fixes for xen_hypercall_hvm() that was introduced in the 6.13
cycle"
* tag 'for-linus-6.14-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: remove unneeded dummy push from xen_hypercall_hvm()
x86/xen: add FRAME_END to xen_hypercall_hvm()
x86/xen: fix xen_hypercall_hvm() to not clobber %rbx
Stack alignment of the kernel in 64-bit mode is 8, not 16, so the
dummy push in xen_hypercall_hvm() for aligning the stack to 16 bytes
can be removed.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
xen_hypercall_hvm() is missing a FRAME_END at the end, add it.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502030848.HTNTTuo9-lkp@intel.com/
Fixes: b4845bb638 ("x86/xen: add central hypercall functions")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
xen_hypercall_hvm(), which is used when running as a Xen PVH guest at
most only once during early boot, is clobbering %rbx. Depending on
whether the caller relies on %rbx to be preserved across the call or
not, this clobbering might result in an early crash of the system.
This can be avoided by using an already saved register instead of %rbx.
Fixes: b4845bb638 ("x86/xen: add central hypercall functions")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
When waking a VM's NX huge page recovery thread, ensure the thread is
actually alive before trying to wake it. Now that the thread is spawned
on-demand during KVM_RUN, a VM without a recovery thread is reachable via
the related module params.
BUG: kernel NULL pointer dereference, address: 0000000000000040
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:vhost_task_wake+0x5/0x10
Call Trace:
<TASK>
set_nx_huge_pages+0xcc/0x1e0 [kvm]
param_attr_store+0x8a/0xd0
module_attr_store+0x1a/0x30
kernfs_fop_write_iter+0x12f/0x1e0
vfs_write+0x233/0x3e0
ksys_write+0x60/0xd0
do_syscall_64+0x5b/0x160
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f3b52710104
</TASK>
Modules linked in: kvm_intel kvm
CR2: 0000000000000040
Fixes: 931656b9e2 ("kvm: defer huge page recovery vhost task to later")
Cc: stable@vger.kernel.org
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250124234623.3609069-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only statement in a kvm_arch_post_init_vm implementation
can be moved into the x86 kvm_arch_init_vm. Do so and remove all
traces from architecture-independent code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SYNTHESIZED_F() generally is used together with setup_force_cpu_cap(),
i.e. when it makes sense to present the feature even if cpuid does not
have it *and* the VM is not able to see the difference. For example,
it can be used when mitigations on the host automatically protect
the guest as well.
The "SYNTHESIZED_F(SRSO_USER_KERNEL_NO)" line came in as a conflict
resolution between the CPUID overhaul from the KVM tree and support
for the feature in the x86 tree. Using it right now does not hurt,
or make a difference for that matter, because there is no
setup_force_cpu_cap(X86_FEATURE_SRSO_USER_KERNEL_NO). However, it
is a little less future proof in case such a setup_force_cpu_cap()
appears later, for a case where the kernel somehow is not vulnerable
but the guest would have to apply the mitigation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Support multiple hook locations for maint scripts of Debian package
- Remove 'cpio' from the build tool requirement
- Introduce gendwarfksyms tool, which computes CRCs for export symbols
based on the DWARF information
- Support CONFIG_MODVERSIONS for Rust
- Resolve all conflicts in the genksyms parser
- Fix several syntax errors in genksyms
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmedJ7AVHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsGBs0P/1svrWxVRdD7XFtM+UykQqf2R/be
SnZDeeviqdbGr1J0X5FM/pjaeOb1BPnXsr6O67QaWhyVnpWUviBwwYG2NrCDsx9k
AaMVsROzpDIeoMhMNeYVs+/SYhA8Jndnd4BOH5CBbo52k4/BLqhU9LXLncLgjZbF
nys30TilwOaylKq2FHFVI1GhTCQtKKbq+tIxE1SKkHZ1LsSaFphe/eCHMpcOvQb+
zIFHMm2eIcSlS8TCONFeTnw7NdeCVldYbPCyNAV+nC7Ow7VM8Ws1fq5vsKeH3TGE
+3qtgQS41KpccNRdp4cTvy6p9iBEvpAvk1BAAOZ347EtLXrNNhngg65CbjyCUt7H
yBpgWZ6GAGq2yExX5bHbbFHb/n4I3HhkZKeaFDZ3VnMPnni4zdbBqD+sBSI3yHLC
LUh1NI8gIHjD4bIazbjxWMAQlamQNVNMaHkHqGjro2yIbLL1i2mqMdXuzYhAVwrx
al7hv357fVPwQ1Gfin7R23T4/NqBTB+1IJnYTBYnnAFnUIAdhsuu9YkX8I97i6yu
mdTrGROpEYL0GZTE+1LGz6V9DZfQHP8GZ5fDAU1X/f8Js9xkn1lHFhFCg/xM5f9j
RnwHdiRbvq6uL40/zkinlcpPnGWJkAXWgZqlc0ZbwW8v/vKI51Uo0qUxlVSeu2uH
mQG30SibArJFPpUN
=D553
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support multiple hook locations for maint scripts of Debian package
- Remove 'cpio' from the build tool requirement
- Introduce gendwarfksyms tool, which computes CRCs for export symbols
based on the DWARF information
- Support CONFIG_MODVERSIONS for Rust
- Resolve all conflicts in the genksyms parser
- Fix several syntax errors in genksyms
* tag 'kbuild-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (64 commits)
kbuild: fix Clang LTO with CONFIG_OBJTOOL=n
kbuild: Strip runtime const RELA sections correctly
kconfig: fix memory leak in sym_warn_unmet_dep()
kconfig: fix file name in warnings when loading KCONFIG_DEFCONFIG_LIST
genksyms: fix syntax error for attribute before init-declarator
genksyms: fix syntax error for builtin (u)int*x*_t types
genksyms: fix syntax error for attribute after 'union'
genksyms: fix syntax error for attribute after 'struct'
genksyms: fix syntax error for attribute after abstact_declarator
genksyms: fix syntax error for attribute before nested_declarator
genksyms: fix syntax error for attribute before abstract_declarator
genksyms: decouple ATTRIBUTE_PHRASE from type-qualifier
genksyms: record attributes consistently for init-declarator
genksyms: restrict direct-declarator to take one parameter-type-list
genksyms: restrict direct-abstract-declarator to take one parameter-type-list
genksyms: remove Makefile hack
genksyms: fix last 3 shift/reduce conflicts
genksyms: fix 6 shift/reduce conflicts and 5 reduce/reduce conflicts
genksyms: reduce type_qualifier directly to decl_specifier
genksyms: rename cvar_qualifier to type_qualifier
...
Due to the fact that runtime const ELF sections are named without a
leading period or double underscore, the RSTRIP logic that removes the
static RELA sections from vmlinux fails to identify them. This results
in a situation like below, where some sections that were supposed to get
removed are left behind.
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[58] runtime_shift_d_hash_shift PROGBITS ffffffff83500f50 2900f50 000014 00 A 0 0 1
[59] .relaruntime_shift_d_hash_shift RELA 0000000000000000 55b6f00 000078 18 I 70 58 8
[60] runtime_ptr_dentry_hashtable PROGBITS ffffffff83500f68 2900f68 000014 00 A 0 0 1
[61] .relaruntime_ptr_dentry_hashtable RELA 0000000000000000 55b6f78 000078 18 I 70 60 8
[62] runtime_ptr_USER_PTR_MAX PROGBITS ffffffff83500f80 2900f80 000238 00 A 0 0 1
[63] .relaruntime_ptr_USER_PTR_MAX RELA 0000000000000000 55b6ff0 000d50 18 I 70 62 8
So tweak the match expression to strip all sections starting with .rel.
While at it, consolidate the logic used by RISC-V, s390 and x86 into a
single shared Makefile library command.
Link: https://lore.kernel.org/all/CAHk-=wjk3ynjomNvFN8jf9A1k=qSc=JFF591W00uXj-qqNUxPQ@mail.gmail.com/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- The biggest changes are the TLB flushing scalability optimizations,
to update the mm_cpumask lazily and related changes. This feature
has both a track record and a continued risk of performance regressions,
so it was already delayed by a cycle - but it's all 100% perfect now™.
(Rik van Riel)
- Also miscellaneous fixes and cleanups. (Gautam Somani,
Kirill A. Shutemov, Sebastian Andrzej Siewior)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmeclXoRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1iDixAAjmTv/3KBuXaW/EoqGkyr/dgJld/Cww5a
4yyM6pbVOkiP+pmSTiHChhn07A4eB1TMCP0RJHXUgsCr6VLY8+68MdafCMIn9hWK
mZYbCFF2yWy2EP4a26ifTi/3P355x5WILxJH5K4fHxcsXjRy5LgCLaq0tObEqnZ8
OAGIBw+g3t7CYurqlKfYiVSUiUG8PbXbS9Bh/0SjRe5FRbJDre3XJy9ks2c83wHU
anPe5qpkw3mg8hPiFQfv3EYyGe1NhAs9hBMYLKqUyyxZEixymZDsvjYnOe154OMI
9xk3XpeFFejwvBJ1pfSS3V5svm5sqtnRpZSivUl/gsT7LM65N8RqKMrTvcpT+fm7
cQs8JK3LP+S2ih3S4wTZRdVGnIQGzqHkp9R6e8T4r9FQ2688mk/OvqJOCZEAcPgx
VRHiMXtgZ3e8OsMiY+82TGt9wyujCR/kk+hzgXtNC1Lr++jCz848n3UcUe+wvzzw
Lo8LGGdAzBRviwiwwrRxCYKtlUtkIwbIKtfswv5pfapji2cTHckhvuKAcujpvaXd
+qgnX8XNVZWoG57tN02jZ8ZgAFgZlV2A03WG5e0c1wb4/3AnGQDGpCEWX2/lMj1J
U/FFwNA6+jzcVMYyN/LQAETv0Go7sJOVTTie7mAHEhyHvxvb2YfV9VJ60V2WBKn5
znIuU0l2qyQ=
=g00u
-----END PGP SIGNATURE-----
Merge tag 'x86-mm-2025-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
- The biggest changes are the TLB flushing scalability optimizations,
to update the mm_cpumask lazily and related changes.
This feature has both a track record and a continued risk of
performance regressions, so it was already delayed by a cycle - but
it's all 100% perfect now™ (Rik van Riel)
- Also miscellaneous fixes and cleanups. (Gautam Somani, Kirill
Shutemov, Sebastian Andrzej Siewior)
* tag 'x86-mm-2025-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Remove unnecessary include of <linux/extable.h>
x86/mtrr: Rename mtrr_overwrite_state() to guest_force_mtrr_state()
x86/mm/selftests: Fix typo in lam.c
x86/mm/tlb: Only trim the mm_cpumask once a second
x86/mm/tlb: Also remove local CPU from mm_cpumask if stale
x86/mm/tlb: Add tracepoint for TLB flush IPI to stale CPU
x86/mm/tlb: Update mm_cpumask lazily
- hostfs: Convert to writepages
- Many cleanups: Removal of dead macros, missing __init
-----BEGIN PGP SIGNATURE-----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=hSNx
-----END PGP SIGNATURE-----
Merge tag 'uml-for-linus-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- hostfs: Convert to writepages
- many cleanups: removal of dead macros, missing __init
* tag 'uml-for-linus-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: Remove unused asm/archparam.h header
um: Include missing headers in asm/pgtable.h
hostfs: Convert to writepages
um: rtc: use RTC time when calculating the alarm
um: Remove unused user_context function
um: Remove unused THREAD_NAME_LEN macro
um: Remove unused PGD_BOUND macro
um: Mark setup_env_path as __init
um: Mark install_fatal_handler as __init
um: Mark set_stklim as __init
um: Mark get_top_address as __init
um: Mark parse_cache_line as __init
um: Mark parse_host_cpu_flags as __init
um: Count iomem_size only once in physmem calculation
um: Remove obsolete fixmap support
um: Remove unused MODULES_LEN macro
Subsystem:
- use boolean values with device_init_wakeup()
Drivers:
- pcf2127: add BSM support
- pcf85063: fix possible out of bound write
-----BEGIN PGP SIGNATURE-----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=BxV0
-----END PGP SIGNATURE-----
Merge tag 'rtc-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Not much this cycle, there are multiple small fixes.
Core:
- use boolean values with device_init_wakeup()
Drivers:
- pcf2127: add BSM support
- pcf85063: fix possible out of bounds write"
* tag 'rtc-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: pcf2127: add BSM support
rtc: Remove hpet_rtc_dropped_irq()
dt-bindings: rtc: mxc: Document fsl,imx31-rtc
rtc: stm32: Use syscon_regmap_lookup_by_phandle_args
rtc: zynqmp: Fix optional clock name property
rtc: loongson: clear TOY_MATCH0_REG in loongson_rtc_isr()
rtc: pcf85063: fix potential OOB write in PCF85063 NVMEM read
rtc: tps6594: Fix integer overflow on 32bit systems
rtc: use boolean values with device_init_wakeup()
rtc: RTC_DRV_SPEAR should not default to y when compile-testing
Add a new ACPI-related quirk for Vexia EDU ATLA 10 tablet 5V (Hans
de Goede) and fix the MADT parsing code so that CPUs with different
entry types (LAPIC and x2APIC) are initialized in the order in which
they appear in the MADT as required by the ACPI specification (Zhang
Rui).
-----BEGIN PGP SIGNATURE-----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=JXCp
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Add a new ACPI-related quirk for Vexia EDU ATLA 10 tablet 5V (Hans de
Goede) and fix the MADT parsing code so that CPUs with different entry
types (LAPIC and x2APIC) are initialized in the order in which they
appear in the MADT as required by the ACPI specification (Zhang Rui)"
* tag 'acpi-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86/acpi: Fix LAPIC/x2APIC parsing order
ACPI: x86: Add skip i2c clients quirk for Vexia EDU ATLA 10 tablet 5V
GCC 15 changed the default C standard version to C23, which should not
have impacted the kernel because it requests the gnu11 standard via
'-std=' in the main Makefile. However, the x86 compressed boot Makefile
uses its own set of KBUILD_CFLAGS without a '-std=' value (i.e., using
the default), resulting in errors from the kernel's definitions of bool,
true, and false in stddef.h, which are reserved keywords under C23.
./include/linux/stddef.h:11:9: error: expected identifier before ‘false’
11 | false = 0,
./include/linux/types.h:35:33: error: two or more data types in declaration specifiers
35 | typedef _Bool bool;
Set '-std=gnu11' in the x86 compressed boot Makefile to resolve the
error and consistently use the same C standard version for the entire
kernel.
Closes: https://lore.kernel.org/4OAhbllK7x4QJGpZjkYjtBYNLd_2whHx9oFiuZcGwtVR4hIzvduultkgfAIRZI3vQpZylu7Gl929HaYFRGeMEalWCpeMzCIIhLxxRhq4U-Y=@protonmail.com/
Closes: https://lore.kernel.org/Z4467umXR2PZ0M1H@tucnak/
Reported-by: Kostadin Shishmanov <kostadinshishmanov@protonmail.com>
Reported-by: Jakub Jelinek <jakub@redhat.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250121-x86-use-std-consistently-gcc-15-v1-1-8ab0acf645cb%40kernel.org
