Introduce descriptions of the 8cx Gen3-based Microsoft Surface Pro 9 5G,
X Elite based Dell XPS 13 9345, the QCS9100 platform and the "Ride"
development boards thereon, and the SM7325 platform and the Nothing
Phone 1.
MSM8998 gains support for HDMI. The Lenovo Miix 630 gains support for
volume keys, audio and sensor DSPs, touchscreen, and its specific WiFi
calibration variant.
On QCM6490, Fairphone FP5 gains a thermistor adjacent to UFS/RAM, while
the IDP gains UFS and WiFi support. For QCS6490 changes to Rb3Gen2
enables WiFi, Venus, PCIe, SD-card, and volume keys. Adreno speedbins
are adjusted and PMU nodes' compatibles for the two clusters are
corrected.
The DB845C/RB3 and QRB5165 RB5 vision mezzanines are converted to
DeviceTree overlays, and both gains CMA heap for libcamera to use.
SA8775P gains GPI DMA support, support for controlling download mode
(bootloader-assisted ramdump support), additional UARTs, and qcrypto
support. The "Ride" development board gains WiFi and Bluetooth support.
On SC8280XP (8cx Gen3) another UART is described, used in the
Microsoft Surface 9 5G. The WiFi/BT combo chip's power management unit
is described on the CRD and Lenovo ThinkPad X13s.
On SDM630/660 the GPU SMMU and clock controller is added, as is the
A2Noc and LPASS SMMU, and the DSP-based WiFi device. GPU, modem DSP and
WiFi is then enabled on the Inforce 6560 development board.
On SM8450 Hardware Development Kit, the WCN6855 is modelled to enable
WiFi and Bluetooth. A "global" interrupt is defined on SM8450 PCIe RC
controller, to enable hotplug.
On X Elite, USB Type-C controllers are marked as usb-role-switch
capable, the GICv3 ITS is enabled for PCIe. TCSR region is described and
wired up to allow setting and cleaning the download mode
(bootloader-assisted ramdump) flag, and residency numbers for C4/C5 are
updated.
USB role switch is enabled on Lenovo ThinkPad T14s and the ASUS Vivobook
S15. The T14s also gains support for a second source trackpad. The
Microsoft Surface Laptop gains LID switch and the USB Type-A connector
attached to the multiport controller is enabled. The CRD has its HID
device power supplies described.
Application SMMU is flagged as DMA coherent across QDU1000, SC7180,
SC8180X, SC8280XP, SDM670, SDM845, SM8150, SM8350, SM8450, and X1E80100.
In addition to this, the effort to improve style and binding compliance
continued.
-----BEGIN PGP SIGNATURE-----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=Qu8Z
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=JBWR
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree changes for v6.13
Introduce descriptions of the 8cx Gen3-based Microsoft Surface Pro 9 5G,
X Elite based Dell XPS 13 9345, the QCS9100 platform and the "Ride"
development boards thereon, and the SM7325 platform and the Nothing
Phone 1.
MSM8998 gains support for HDMI. The Lenovo Miix 630 gains support for
volume keys, audio and sensor DSPs, touchscreen, and its specific WiFi
calibration variant.
On QCM6490, Fairphone FP5 gains a thermistor adjacent to UFS/RAM, while
the IDP gains UFS and WiFi support. For QCS6490 changes to Rb3Gen2
enables WiFi, Venus, PCIe, SD-card, and volume keys. Adreno speedbins
are adjusted and PMU nodes' compatibles for the two clusters are
corrected.
The DB845C/RB3 and QRB5165 RB5 vision mezzanines are converted to
DeviceTree overlays, and both gains CMA heap for libcamera to use.
SA8775P gains GPI DMA support, support for controlling download mode
(bootloader-assisted ramdump support), additional UARTs, and qcrypto
support. The "Ride" development board gains WiFi and Bluetooth support.
On SC8280XP (8cx Gen3) another UART is described, used in the
Microsoft Surface 9 5G. The WiFi/BT combo chip's power management unit
is described on the CRD and Lenovo ThinkPad X13s.
On SDM630/660 the GPU SMMU and clock controller is added, as is the
A2Noc and LPASS SMMU, and the DSP-based WiFi device. GPU, modem DSP and
WiFi is then enabled on the Inforce 6560 development board.
On SM8450 Hardware Development Kit, the WCN6855 is modelled to enable
WiFi and Bluetooth. A "global" interrupt is defined on SM8450 PCIe RC
controller, to enable hotplug.
On X Elite, USB Type-C controllers are marked as usb-role-switch
capable, the GICv3 ITS is enabled for PCIe. TCSR region is described and
wired up to allow setting and cleaning the download mode
(bootloader-assisted ramdump) flag, and residency numbers for C4/C5 are
updated.
USB role switch is enabled on Lenovo ThinkPad T14s and the ASUS Vivobook
S15. The T14s also gains support for a second source trackpad. The
Microsoft Surface Laptop gains LID switch and the USB Type-A connector
attached to the multiport controller is enabled. The CRD has its HID
device power supplies described.
Application SMMU is flagged as DMA coherent across QDU1000, SC7180,
SC8180X, SC8280XP, SDM670, SDM845, SM8150, SM8350, SM8450, and X1E80100.
In addition to this, the effort to improve style and binding compliance
continued.
* tag 'qcom-arm64-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (120 commits)
arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Add cma heap for libcamera softisp support
arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Add cma heap for libcamera softisp support
arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Drop redundant clock-lanes from camera@1a
arm64: dts: qcom: sc8280xp-x13s: Drop redundant clock-lanes from camera@10
arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Convert mezzanine riser to dtso
arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Convert mezzanine riser to dtbo
arm64: dts: qcom: sm8450-hdk: model the PMU of the on-board wcn6855
arm64: dts: qcom: sc8280xp-x13s: model the PMU of the on-board wcn6855
arm64: dts: qcom: sc8280xp-crd: enable bluetooth
arm64: dts: qcom: sc8280xp-crd: model the PMU of the on-board wcn6855
arm64: dts: qcom: qcs9100: Add support for the QCS9100 Ride and Ride Rev3 boards
dt-bindings: arm: qcom: Document qcs9100-ride and qcs9100-ride Rev3
arm64: dts: qcom: x1e80100: Update C4/C5 residency/exit numbers
arm64: dts: qcom: x1e80100-crd: describe HID supplies
arm64: dts: qcom: msm8998-lenovo-miix-630: add WiFi calibration variant
arm64: dts: qcom: msm8998-clamshell: enable resin/VolDown
arm64: dts: qcom: msm8998-lenovo-miix-630: enable VolumeUp button
arm64: dts: qcom: msm8998-lenovo-miix-630: enable aDSP and SLPI
arm64: dts: qcom: msm8998-lenovo-miix-630: enable touchscreen
arm64: dts: qcom: qcs6490-rb3gen2: Add PCIe nodes
...
Link: https://lore.kernel.org/r/20241105164901.7787-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add a CPU Operating Performance Points table for the RZ/V2H SoC,
- Add Battery Backup Function (VBATTB) and RTC support for the RZ/G3S
SoC and the RZ/G3S SMARC SoM,
- Add DMAC support for MMC on the RZ/A1H SoC and the Genmai
development board,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZyjGagAKCRCKwlD9ZEnx
cHrRAPsETRczaN2vpy+9m0EJuN+QhlX980jiLYndIx8YUvMG3QD/XdLdG4MnGQtg
2x8u2BfbbXOIrV2YWErVIVn/bQNAMgk=
=FjWC
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=7QOY
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.13-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.13 (take two)
- Add a CPU Operating Performance Points table for the RZ/V2H SoC,
- Add Battery Backup Function (VBATTB) and RTC support for the RZ/G3S
SoC and the RZ/G3S SMARC SoM,
- Add DMAC support for MMC on the RZ/A1H SoC and the Genmai
development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.13-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: rzg3s-smarc-som: Enable RTC
arm64: dts: renesas: rzg3s-smarc-som: Enable VBATTB
arm64: dts: renesas: r9a08g045: Add RTC node
arm64: dts: renesas: r9a08g045: Add VBATTB node
arm64: dts: renesas: white-hawk-cpu-common: Add pin control for DSI-eDP IRQ
ARM: dts: renesas: r7s72100: Add DMA support to MMCIF
ARM: dts: renesas: r7s72100: Add DMAC node
arm64: dts: renesas: hihope: Drop #sound-dai-cells
dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB
dt-bindings: clock: r9a08g045-cpg: Add power domain ID for RTC
arm64: dts: renesas: r9a09g057: Add OPP table
Link: https://lore.kernel.org/r/cover.1730726155.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New device support: Kobo Clara 2E, Comvetia LXR board, i.MX6DL DHCOM
SoM on PDK2 carrier
- A bunch of dt-schema warning fixes from Fabio Estevam
- A set of changes from Hiago De Franco to update audio card for Apalis
and Colibri devices
- A series from Marek Vasut to improve pin config nodes according to
bindings
- A couple of changes from Sean Nyekjaer to add DMA support i.MX6UL
UART ports
- Other small and random changes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmcog3gUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7rYAf+IAD92c4ybmxaG5OmhNapvIla9DhE
97ag0d7otHmT2NVj8tWlvbyuA3YioxqkVengNEZ5gQ44aex70eroiknesF38ix81
PQcfgLTXcK5ElrubnfCIau5CJfH3a5STRUJvZdg4B2VX2Pclmz/N/Mc1l5CzqZth
xbi7Iuf8otjbq8RrvZ2Bu1GhEuXUrb9F+xBJAiVChlMLwapjgb8X6yPqfqouoiBa
sFJquqsc2+j+uj2cF/x/noljtwSlvhjM0Bs9BEDaXEkcS8zXV62Iq6AEBibWDwdy
Dw33psg+EdUeskIYWw+d3mYA4cQbSAAJ03i/lgYO0BaTgUMB46xVDvLf/g==
=WHH7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=WHOI
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree changes for 6.13:
- New device support: Kobo Clara 2E, Comvetia LXR board, i.MX6DL DHCOM
SoM on PDK2 carrier
- A bunch of dt-schema warning fixes from Fabio Estevam
- A set of changes from Hiago De Franco to update audio card for Apalis
and Colibri devices
- A series from Marek Vasut to improve pin config nodes according to
bindings
- A couple of changes from Sean Nyekjaer to add DMA support i.MX6UL
UART ports
- Other small and random changes
* tag 'imx-dt-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (39 commits)
ARM: dts: imx: Add devicetree for Kobo Clara 2E
ARM: dts: imx6sll: Improve gpc description
ARM: dts: imx6sl: Pass tempmon #thermal-sensor-cells
ARM: dts: imx6sx: Fix tempmon description
ARM: dts: imx6sll: Remove regulator-3p0 unit address
ARM: dts: imx6sll: Fix the last SPDIF clock name
ARM: dts: imx7ulp: Remove incorrect mmc fallback compatible
ARM: dts: imx6sl: Remove incorrect mmc fallback compatible
ARM: dts: imx6sx: Remove incorrect mmc fallback compatible
ARM: dts: imx6sl/sll: Add the "fsl,imx6dl-gpt" fallback
ARM: dts: imx6ul: Drop duplicate space in iomux node groups
ARM: dts: imx6sx: Align pin config nodes with bindings
ARM: dts: imx6sl: imx6sll: Align pin config nodes with bindings
ARM: dts: imx6qp: Align pin config nodes with bindings
ARM: dts: imx6qdl: Align pin config nodes with bindings
ARM: dts: imx6q: Align pin config nodes with bindings
ARM: dts: imx6dl: Align pin config nodes with bindings
ARM: dts: imx53: Align pin config nodes with bindings
ARM: dts: imx51: Align pin config nodes with bindings
ARM: dts: imx50: Align pin config nodes with bindings
...
Link: https://lore.kernel.org/r/20241104090055.1881860-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
IPQ4019 flash partition scheme is moved to nvmem-layout. SDX55 and SDX65
PCIe EP controllers gain missing linux,pci-domain properties.
Stylistic improvements across a range of platforms and devices.
-----BEGIN PGP SIGNATURE-----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=fOIQ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=dKCF
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm32-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm32 DeviceTree updates for v6.13
IPQ4019 flash partition scheme is moved to nvmem-layout. SDX55 and SDX65
PCIe EP controllers gain missing linux,pci-domain properties.
Stylistic improvements across a range of platforms and devices.
* tag 'qcom-arm32-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: ipq4019: use nvmem-layout
ARM: dts: qcom: change labels to lower-case
ARM: dts: qcom: sdx65: Add 'linux,pci-domain' to PCIe EP controller node
ARM: dts: qcom: sdx55: Add 'linux,pci-domain' to PCIe EP controller node
ARM: dts: qcom: minor whitespace cleanup
ARM: dts: qcom: drop underscore in node names
Link: https://lore.kernel.org/r/20241104034744.14378-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add support for PCIe on the R-Car V4M SoC and the Gray Hawk
development board,
- Add support for watchdog, OS timer, keyboard switch, SDHI, and MMCIF
on the Genmai development board,
- Add support for watchdog on the RSK+RZA1 development board,
- Add support for QSPI NOR FLASH on the RZ/G2UL SMARC SoM,
- Add support for E-FUSE on the R-Car V3U, S4-8, V4H, and V4M SoCs,
- Use interrupts-extended where it makes sense,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZxJK7wAKCRCKwlD9ZEnx
cIc9AP9qfjKj9dER6XolPiFCNTVkQ4mUwXWSfw2tfcF7c14lQQEArTm1rPjJFnE6
ov1fEylEw6cf/lX63RAx1cO3b2RYOwQ=
=d+VK
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=XVt1
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.13-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.13
- Add support for PCIe on the R-Car V4M SoC and the Gray Hawk
development board,
- Add support for watchdog, OS timer, keyboard switch, SDHI, and MMCIF
on the Genmai development board,
- Add support for watchdog on the RSK+RZA1 development board,
- Add support for QSPI NOR FLASH on the RZ/G2UL SMARC SoM,
- Add support for E-FUSE on the R-Car V3U, S4-8, V4H, and V4M SoCs,
- Use interrupts-extended where it makes sense,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.13-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (53 commits)
arm64: dts: renesas: rzg3s-smarc: Use interrupts-extended for gpio-keys
arm64: dts: renesas: beacon-renesom: Use interrupts-extended for touchscreen
arm64: dts: renesas: Use interrupts-extended for WLAN
arm64: dts: renesas: Use interrupts-extended for video decoders
arm64: dts: renesas: Use interrupts-extended for USB muxes
arm64: dts: renesas: Use interrupts-extended for PMICs
arm64: dts: renesas: Use interrupts-extended for I/O expanders
arm64: dts: renesas: Use interrupts-extended for HDMI bridges
arm64: dts: renesas: Use interrupts-extended for Ethernet PHYs
arm64: dts: renesas: Use interrupts-extended for DisplayPort bridges
ARM: dts: renesas: kzm9g: Use interrupts-extended for sensors
ARM: dts: renesas: kzm9g: Use interrupts-extended for I/O expander
ARM: dts: renesas: r8a7742-iwg21m: Use interrupts-extended for RTC
ARM: dts: renesas: iwg22d-sodimm: Use interrupts-extended for port expander
ARM: dts: renesas: Use interrupts-extended for video decoders
ARM: dts: renesas: Use interrupts-extended for touchpanels
ARM: dts: renesas: Use interrupts-extended for PMICs
ARM: dts: renesas: Use interrupts-extended for HDMI bridges
ARM: dts: renesas: Use interrupts-extended for Ethernet PHYs
ARM: dts: renesas: Use interrupts-extended for Ethernet MACs
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The preferred nodename for fixed-regulators has changed to
pattern: '^regulator(-[0-9]+v[0-9]+|-[0-9a-z-]+)?$'
Fix all Rockchip DT regulator nodenames.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/cfc3cfe1-086b-48f1-9b89-f17c9391d3cc@gmail.com
[Also include the backlight-regulator and panel-regulator from
rk3288-veyron-edp, and adapt the Pinky device accordingly]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Allwinner suniv boards' DT files were accidentally duplicated
in the Makefile when they were moved to the new directory
structure. Remove these duplicates for code cleanness.
Fixes: 724ba67515 ("ARM: dts: Move .dts files to vendor sub-directories")
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20241104230628.3736186-1-csokas.bence@prolan.hu
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
dtbs_check was moaning about twl6030-power, use the standard property
instead.
Apparently that twl6030 power snippet slipped in without the
corresponding driver. Now it is handled by the standard property.
CC: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Paul Kocialkowski <contact@paulk.fr>
Link: https://lore.kernel.org/r/20240915193527.1071792-1-andreas@kemnade.info
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Commit b9bf561261 ("ARM: dts: am335x-bone-common: Increase MDIO
reset deassert time") already increased the MDIO reset deassert delay
from 6.5 to 13 ms, but this may still cause Ethernet PHY probe failures:
SMSC LAN8710/LAN8720 4a101000.mdio:00: probe with driver SMSC LAN8710/LAN8720 failed with error -5
On BeagleBone Black Rev. C3, ETH_RESETn is controlled by an open-drain
AND gate. It is pulled high by a 10K resistor, and has a 4.7µF
capacitor to ground, giving an RC time constant of 47ms. As it takes
0.7RC to charge the capacitor above the threshold voltage of a CMOS
input (VDD/2), the delay should be at least 33ms. Considering the
typical tolerance of 20% on capacitors, 40ms would be safer. Add an
additional safety margin and settle for 50ms.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/9002a58daa1b2983f39815b748ee9d2f8dcc4829.1730366936.git.geert+renesas@glider.be
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
When global LED brightness is changed by pressing the front button on
Turris Omnia, the MCU can produce an interrupt to the CPU. Add the
description of this interrupt to the LED controller node.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
at24.yaml defines the node name for at24 EEPROMs as 'eeprom'.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Adds a devicetree for the Kobo Clara 2E Ebook reader. It is based
on boards marked with "37NB-E60K2M+4A2" or "37NB-E60K2M+4B0". It is
equipped with an i.MX6SLL SoC.
Expected to work:
- Buttons
- Wifi
- Bluetooth
(if Wifi is initialized first, driver does not handle regulators
yet)
- LED
- uSD
- USB
- RTC
- Touchscreen
Add human-readable comments for devices without mainlined driver and
binding. Such comments can e.g. be help to find testers if someone
starts to work on the missing drivers.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add a device node for the Direct Memory Access Controller on the RZ/A1H
SoC.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241015224801.2535-5-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
According to fsl,imx-gpc.yaml, 'clocks', 'clock-names', and 'pgc'
are required properties.
Describe them to fix the following dt-schema warnings:
interrupt-controller@20dc000: 'clocks' is a required property
interrupt-controller@20dc000: 'clock-names' is a required property
interrupt-controller@20dc000: 'pgc' is a required property
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to fsl,imx-anatop.yaml, #thermal-sensor-cells is a required
property.
Add it to fix the following dt-schema warning:
tempmon: '#thermal-sensor-cells' is a required property
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to imx-thermal.yaml, the valid compatible string
for i.MX6SX is just: compatible = "fsl,imx6sx-tempmon".
Also pass #thermal-sensor-cells = <0> as it is a required property.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to imx-thermal.yaml, the anatop regulators should not
contain unit-address/reg entries.
Change it accordingly.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The last SPDIF clock is IMX6SLL_CLK_SPBA, so change the last
clock-name entry to 'spba' as expected by fsl,spdif.yaml.
This fixes the following dt-schema warning:
spdif@2004000: clock-names:9: 'spba' was expected
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Per fsl-imx-esdhc.yaml, the correct compatible string for i.MX7ULP is:
compatible = "fsl,imx7ulp-usdhc"
Remove the undocumented "fsl,imx6sx-usdhc" fallback compatible.
This fixes the following dt-schema warnings:
mmc@2198000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6sl-usdhc', 'fsl,imx6q-usdhc'] is too long
['fsl,imx6sl-usdhc', 'fsl,imx6q-usdhc'] is too short
'fsl,imx50-esdhc' was expected
...
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Per fsl-imx-esdhc.yaml, the correct compatible string for i.MX6SL is:
compatible = "fsl,imx6sl-usdhc"
Remove the undocumented "fsl,imx6q-usdhc" fallback compatible.
This fixes the following dt-schema warnings:
mmc@2190000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6sl-usdhc', 'fsl,imx6q-usdhc'] is too long
['fsl,imx6sl-usdhc', 'fsl,imx6q-usdhc'] is too short
'fsl,imx50-esdhc' was expected
...
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Per fsl-imx-esdhc.yaml, the correct compatible string for i.MX6SX is:
compatible = "fsl,imx6sx-usdhc"
Remove the undocumented "fsl,imx6sl-usdhc" fallback compatible.
This fixes the following dt-schema warnings:
mmc@2198000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6sl-usdhc', 'fsl,imx6q-usdhc'] is too long
['fsl,imx6sl-usdhc', 'fsl,imx6q-usdhc'] is too short
'fsl,imx50-esdhc' was expected
...
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Per fsl,imxgpt.yaml, the i.MX6SL GPT compatible should be described as:
compatible = "fsl,imx6sl-gpt", "fsl,imx6dl-gpt";
Do as suggested to fix the following dt-schema warnings:
timer@2098000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6sl-gpt'] is too short
'fsl,imx1-gpt' was expected
'fsl,imx21-gpt' was expected
'fsl,imx27-gpt' was expected
'fsl,imx31-gpt' was expected
'fsl,imx6sl-gpt' is not one of ['fsl,imx25-gpt', 'fsl,imx50-gpt', 'fsl,imx51-gpt', 'fsl,imx53-gpt', 'fsl,imx6q-gpt']
'fsl,imx6dl-gpt' was expected
'fsl,imx6sl-gpt' is not one of ['fsl,imx6ul-gpt', 'fsl,imx7d-gpt']
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Drop space between node name and opening brace {.
No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx6q-mba6
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
make dtbs_check has below warning:
arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dtb: usbphy@20c9000: fsl,tx-d-cal: 5 is less than the minimum of 79
from schema $id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml#
According to schema, valid value of fsl,tx-d-cal is from 79 to 119. This
will convert register raw value <0x5> to corresponding <106>.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Operating stable without reduced chip life at 1Ghz needs several
technologies working: The technologies involve
- SmartReflex
- DVFS
As this cannot directly specified in the OPP table as dependecies in the
devicetree yet, use the turbo flag again to mark this OPP as something
special to have some kind of opt-in.
So revert commit
5f1bf7ae84 ("ARM: dts: omap36xx: Remove turbo mode for 1GHz variants")
Practical reasoning:
At least the GTA04A5 (DM3730) has become unstable with that OPP enabled.
Furthermore nothing enforces the availability of said technologies,
even in the kernel configuration, so allow users to rather opt-in.
Cc: Stable@vger.kernel.org
Fixes: 5f1bf7ae84 ("ARM: dts: omap36xx: Remove turbo mode for 1GHz variants")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20241018214727.275162-1-andreas@kemnade.info
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Define the GPIO expander which controls at least some camera gpios.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20241010122957.85164-5-andreas@kemnade.info
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Set them to the state seen in a running system, initialized
by vendor u-boot or kernel. Add line names where they are defined in the
vendor kernel.
gpio15 resets something in the display, otherwise meaning of the
gpios is not known.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20241010122957.85164-4-andreas@kemnade.info
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Wire up the regulators where usage is plausible. Do not
wire them if purpose/usage is unclear like 5V for
many things requiring lower voltages.
Tested on vendor kernel that backlight definitively does not react
on blc_[rl] GPIOs.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20241010122957.85164-3-andreas@kemnade.info
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
To properly have things running after cold boot, define
GPIO regulators. Naming is based on board file.
In the vendor kernel they are enabled in a function
called bt2ws_dcdc_init() if the system is not booted just
to charge the battery.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20241010122957.85164-2-andreas@kemnade.info
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add support of WLAN/BT Murata Type 1DX module:
- usart2 is used for Bluetooth interface
- sdmmc2 is used for WLAN (sdio) interface
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add support of WLAN/BT Murata Type 1DX module:
- usart2 is used for Bluetooth interface
- sdmmc2 is used for WLAN (sdio) interface
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
On stm32mp135f-dk board, WLAN/BT module LPO_IN pin is wired to
RTC OUT2_RMP pin.
Provide a pinctrl configuration to enable LSCO on OUT2_RMP.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
On stm32mp157c-dk2 board, WLAN/BT module LPO_IN pin is wired to
RTC OUT2_RMP pin.
Provide a pinctrl configuration to enable LSCO on OUT2_RMP.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Declare pin for LSCO in stm32-pinctrl provider node to reserve this pin
for RTC OUT2_RMP, in stm32mp13-pinctrl.dtsi.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Declare pin for LSCO in stm32-pinctrl provider node to reserve this pin
for RTC OUT2_RMP, in stm32mp15-pinctrl.dtsi.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The STM32MP13xx DHCOR SoM is populated with M24256E EEPROM which has
Additional Write lockable page at separate I2C address. Describe the
page in DT to make it available.
Note that the WLP page on this device is hardware write-protected by
R37 which pulls the nWC signal high to VDD_3V3_1V8 power rail.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The IWDG2 is capable of generating pre-timeout interrupt, which can be used
to wake the system up from suspend to mem. Add the EXTI interrupt mapping
and mark the IWDG2 as wake up source.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
RerVision A33-Vstar board is a board based on their A33-Core1 SoM (A33
SoC + 512MiB DRAM + 4GiB eMMC + AXP223 PMIC), with multiple peripherals:
- MicroSD card slot
- 4.0mm/1.7mm DC jack connected to ACIN of AXP223 (and a XH2.54 2-pin
connector for alternative 5V DC IN)
- OTG-capable microUSB port
- Reserved pads for soldering Li-ion battery and/or 3V RTC battery
- 3 LRADC-attached keys and 2 fixed function power/reset keys
- AP6212 Wi-Fi/BT combo module
- On-board GL850G hub attached to the USB host port of A33, and a
RTL8152 USB Ethernet chip at the downstream of the hub
- Onboard microphone (not supported yet) and headphone jack
- 3 UART ports as PH2.0 3-pin connectors (UART2 one is currently used as
debug output and others are ignored yet)
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Link: https://patch.msgid.link/20240913104845.4112986-2-uwu@icenowy.me
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The DCDC5 voltage rail in the X-Powers AXP809 PMIC has a resolution of
50mV, so the currently enforced limits of 1.475 and 1.525 volts cannot
be set, when the existing regulator value is beyond this range.
This will lead to the whole regulator driver to give up and fail
probing, which in turn will hang the system, as essential devices depend
on the PMIC.
In this case a bug in U-Boot set the voltage to 1.75V (meant for DCDC4),
and the AXP driver's attempt to correct this lead to this error:
==================
[ 4.447653] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded
[ 4.450066] vcc-dram: Bringing 1750000uV into 1575000-1575000uV
[ 4.460272] vcc-dram: failed to apply 1575000-1575000uV constraint: -EINVAL
[ 4.474788] axp20x-regulator axp20x-regulator.0: Failed to register dcdc5
[ 4.482276] axp20x-regulator axp20x-regulator.0: probe with driver axp20x-regulator failed with error -22
==================
Set the limits to values that can be programmed, so any correction will
be successful.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Fixes: 1e1dea7265 ("ARM: dts: sun9i: cubieboard4: Add AXP809 PMIC device node and regulators")
Link: https://patch.msgid.link/20241007222916.19013-1-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Both the node name as well as the compatible were not named
according to the binding expectations, fix that.
Fixes: 47bf3a5c9e ("ARM: dts: rockchip: add the sound setup for rk3036-kylin board")
Cc: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241008203940.2573684-15-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Compatible and clock names did not match the existing binding.
So set the correct values and re-order+rename the clocks.
It looks like no rk3036 board did use the spi controller so far,
so this was never detected on a running device yet.
Fixes: f629fcfab2 ("ARM: dts: rockchip: support the spi for rk3036")
Cc: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241008203940.2573684-14-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Neither the binding nor the driver implementation specify/use the grf
reference provided in the rk3036. And neither does the newer rk3128
user of the hdmi controller. So drop the rockchip,grf property.
Fixes: b7217cf19c ("ARM: dts: rockchip: add hdmi device node for rk3036")
Cc: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241008203940.2573684-13-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The acodec node is not conformant to the binding.
Set the correct nodename, use the correct compatible, add the needed
#sound-dai-cells and sort the rockchip,grf below clocks properties
as expected.
Fixes: faea098e18 ("ARM: dts: rockchip: add core rk3036 dtsi")
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241008203940.2573684-12-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
DTS coding style expects labels to be lowercase. No functional impact.
Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241022-dts-qcom-label-v3-18-0505bc7d2c56@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DTS coding style expects labels to be lowercase. No functional impact.
Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241022-dts-qcom-label-v3-2-0505bc7d2c56@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
'linux,pci-domain' property provides the PCI domain number for the PCI
endpoint controllers in a SoC. If this property is not present, then an
unstable (across boots) unique number will be assigned.
Use this property to specify the domain number based on the actual hardware
instance of the PCI endpoint controllers in SDX65 SoC.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240828-pci-qcom-hotplug-v4-8-263a385fbbcb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
'linux,pci-domain' property provides the PCI domain number for the PCI
endpoint controllers in a SoC. If this property is not present, then an
unstable (across boots) unique number will be assigned.
Use this property to specify the domain number based on the actual hardware
instance of the PCI endpoint controllers in SDX55 SoC.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240828-pci-qcom-hotplug-v4-7-263a385fbbcb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Fix anatop thermal related dtbs_check warnings about node name
and missing thermal-cells property.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for the DH electronics i.MX6DL DHCOM SoM and a PDK2 evaluation
board. The evaluation board features three serial ports, USB OTG, USB host
with an USB hub, Fast or Gigabit ethernet, eMMC, uSD, SD, analog audio,
PCIe and HDMI video output.
All of the aforementioned features except for mSATA are supported, mSATA
is not available on i.MX6DL and is only available on DHCOM populated with
i.MX6Q SoC which is already supported upstream.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add missing panel power-supply property to DT to fix the following warning.
The power supply on this device is very simple chain of regulators from the
main 24V input, describe those.
"
arch/arm/boot/dts/nxp/imx/imx6q-dhcom-pdk2.dtb: panel: 'power-supply' is a required property
"
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings do not allow address/size-cells in GPIO keys and the GPIO keys
is not a bus, see dtbs_check warning:
"
arch/arm/boot/dts/nxp/imx/imx6dl-dhcom-pdk2.dtb: gpio-keys: '#address-cells', '#size-cells' do not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+'
"
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Drop unused regulator-suspend-mem-microvolt property from PMIC regulator nodes.
This property is not used by either U-Boot, Linux, nor is it documented in the
DT bindings, remove it.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Update the audio card name for Colibri iMX7 to match its specific SoM
name, making it compliant with the other names for Colibri iMX6 and
Apalis iMX6.
While this is a breaking change for userspace tooling, it seems
time to implement it since no ALSA UCM or related configuration files
currently exist and we are in the the process of creating them.
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Update the audio card name for Colibri iMX6 to match its specific SoM
name, making it less than 15 characters to fix the following warning
fsl-asoc-card sound: ASoC: driver name too long
'imx6dl-colibri-sgtl5000' -> 'imx6dl-colibri-'
making it compliant with the ALSA configuration specification [1].
While this is a breaking change for userspace tooling, it seems
time to implement it since no ALSA UCM or related configuration files
currently exist and we are in the the process of creating them.
[1] Documentation/sound/alsa-configuration.rst
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Update the audio card name for Apalis iMX6 to match its specific SoM
name, making it less than 15 characters to fix the following warning
fsl-asoc-card sound: ASoC: driver name too long 'imx6q-apalis-sgtl5000'
-> 'imx6q-apalis-sg'
making it compliant with the ALSA configuration specification [1].
While this is a breaking change for userspace tooling, it seems
time to implement it since no ALSA UCM or related configuration files
currently exist and we are in the the process of creating them.
[1] Documentation/sound/alsa-configuration.rst
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The eMMC interface was configured to configure the FBCLK
into the Alt A setting, but this should be in GPIO mode
and available for use as a reset line. Move it to the new
mc_a_2 setting, and define this config in the generic
options.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241019-ux500-dts-updates-v1-2-a89bfbd0f680@linaro.org
Each DHSOM uses three digits in the Cnnn part, drop the trailing zero.
This is a change in comment, no functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Per fixed-clock.yaml, it is not correct to pass unit address and
reg to represent 'fixed-clock'.
Remove it to fix the following dt-schema warning:
clock@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/linux-arm-kernel/172808887941.121658.5039774358299826312.robh@kernel.org/
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The 'turn-on-delay-ms' property is not documented nor used anywhere else.
Remove this invalid property to fix the following dt-schema warning:
Unevaluated properties are not allowed ('turn-on-delay-ms' was unexpected)
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The pinctrl aobus/cbus was originally here to configure the
GPIO interrupt, but it was a bad design and was moved to a
separate gpio_intc node because the GPIO interrupt is actually
separate from the pinctrl/gpio registers.
Drop this reg entry, and fix all the register offsets with a
proper range property.
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # Odroid-C1
Link: https://lore.kernel.org/r/20241015-topic-amlogic-arm32-upstream-bindings-fixes-pinctrl-dtbs-v1-1-c7291f17063e@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add dma support on uart1, uart2, uart3, uart4, uart5, uart6 and uart7.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Comvetia LXR board is based on a i.MX6Q phyFLEX-i.MX6 Quad SoM
from Phytec.
Add a devicetree description for this board.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
dtbs_check warnings:
leds: 'd[0-9]', 'ds[0-9]' do not match any of the regexes :
'(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
leds: 'red', 'green', 'blue' do not match any of regexes :
'(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Rename the led sub nodes according to devicetree specification and
leds-gpio.yaml and for aks-cdu add label property and use the old node
name as value to stay stable and avoid breaking the userspace applications
that depend on those paths.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://lore.kernel.org/r/20241002123010.111028-4-andrei.simion@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Using a generic name common over different platforms and matching the
recent atmel rng binding now.
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Suggested-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20240917072710.125435-3-ada@thorsis.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
SAM9X60 and SAMA7G5 already have those labels. Add it for the other SoC
families so it can be referenced in board files.
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Link: https://lore.kernel.org/r/20240917072710.125435-2-ada@thorsis.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Add the atmel,usart-mode property to the UART nodes. This ensures
compliance with the atmel,at91-usart.yaml schema and resolves the errors
below:
serial@200: $nodename:0: 'serial@200' does not match
'^spi(@.*|-([0-9]|[1-9][0-9]+))?$'
serial@200: atmel,use-dma-rx: False schema does not allow True
serial@200: atmel,use-dma-tx: False schema does not allow True
serial@200: atmel,fifo-size: False schema does not allow [[16]]
These errors indicate that the property
atmel,usart-mode = <AT91_USART_MODE_SERIAL> is missing for
UART nodes 0, 1, 2, 3, 4, 6, 7, 8, 9, 10, 11, and 12.
Fixes: 99c8083358 ("ARM: dts: at91: sam9x60: Add missing flexcom definitions")
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://lore.kernel.org/r/20240912093307.40488-1-andrei.simion@microchip.com
[claudiu.beznea: move the atmel,usart-mode close to vendor specific
properties to cope with DTS coding style]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Luckily, I still had an MMC card lying around. Works fine.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240928092953.2982-8-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
For this to work, User LEDs must be disabled because they share their
pins with SD data lines.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240928092953.2982-6-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.MX7ULP need properly set System Integration Module(SIM) module to make
usb wakeup work well. This will add a "nxp,sim" property for usbphy1.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"phg,pcf8563" is not a valid compatible string.
Use the documented ""nxp,pcf8563" instead.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Default CMA size is too small for HDMI output and VPU usage. Increase the
default size by providing a CMA memory area.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Do not set 'bus-width' in the SoC-include DTSI. It must be set in the
board DTS file. No regressions because MMCIF was not enabled yet for
this SoC.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240928092953.2982-7-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
R-Car Gen1 has an LBSC which has quite a different register set from the
former BSC. To match R-Car M1 with R-Car H1, rename the node to LBSC.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240926103340.16909-6-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
(L)BSC must have a "bus" node name [1] and no unit-address because
there is no reg-property. Fix these entries.
[1] lbsc: $nodename:0: 'lbsc' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240926103340.16909-5-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The DTS code coding style expects exactly one space around '=' or '{'
characters.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240905-dts-cleanup-v1-2-f4c5f7b2c8c2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Underscores should not be used in node names (dtc with W=2 warns about
them), so replace them with hyphens. Use also generic name for
avago,apds9930 node, because generic naming is favored by Devicetree
spec.
Functional impact checked with comparing before/after DTBs with dtx_diff
and fdtdump.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240905-dts-cleanup-v1-1-f4c5f7b2c8c2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
linux,mtd-name is only applicable for PHYSMAP driver and not for
OneNAND.
Fixes the below dtbs_check warning
"omap3430-sdp.dtb: onenand@2,0: Unevaluated properties are not allowed ('linux,mtd-name' was unexpected)"
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240903-gpmc-dtb-v1-3-380952952e34@kernel.org
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
"gpmc,device-nand" is not used any more and leads to below dtbs_check
warning so drop it.
"nand@0,0: Unevaluated properties are not allowed ('gpmc,device-nand' was unexpected)"
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240903-gpmc-dtb-v1-2-380952952e34@kernel.org
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
linux,mtd-name is only supported by PHYSMAP driver and not applicable
to NAND controller/flash nodes.
Fixes the below dtbs_check warning on many OMAP boards.
"nand@0,0: Unevaluated properties are not allowed ('linux,mtd-name' was unexpected)"
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240903-gpmc-dtb-v1-1-380952952e34@kernel.org
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
at24.yaml defines the node name for at24 EEPROMs as 'eeprom'.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Use the more concise interrupts-extended property to fully describe the
interrupt.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240927095414.10241-10-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use the more concise interrupts-extended property to fully describe the
interrupt.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240927095414.10241-9-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Using the inherited interrupt-parent is discouraged. Use
interrupts-extended to fully describe the interrupt.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240927095414.10241-7-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The driver does not use this property and all upstream SoCs use the same
value anyhow. Remove it and get rid of a lot of dtbs_check warnings.
Tested with a Lager (R-Car H2) board and with the soon to be added
Genmai (RZA1) MMCIF support.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240925150904.3582-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Meanwhile, bindings for the audio codec exist. Add #sound-dai-cells
property and limit max frequency accordingly.
codec@0: '#sound-dai-cells' is a required property
codec@0: spi-max-frequency: 5000000 is greater than the maximum of 526000
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240925090812.14497-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use the proper name for the pinctrl bank subnode, fixing:
pinctrl@9880: Unevaluated properties are not allowed ('banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'banks@80b0', 'reg', 'reg' were unexpected)
from schema $id: http://devicetree.org/schemas/pinctrl/amlogic,meson8-pinctrl-cbus.yaml#
pinctrl@84: Unevaluated properties are not allowed ('ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'ao-bank@14', 'reg', 'reg' were unexpected)
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20240916-topic-amlogic-arm32-upstream-bindings-fixes-v2-7-0b20ed4f0571@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The meson6 atv1200 has a lot of dtbs check errors, but since
no active contributor have any boards with Meson6 SoC, plus
no upstream GPIO, pinctrl, clock, MMC... for that SoC either,
let's start decommissioning Meson6 support by removing the Device
Tree files first then remove the MACH_MESON6 in a second time.
If someone is interested in Meson6 support they should bring it back
along with a few more patches for upstream support of further
peripherals.
Suggested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20240916-topic-amlogic-arm32-upstream-bindings-fixes-v2-4-0b20ed4f0571@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
This concludes a long journey towards replacing the old
board files with devictree description on the Cirrus Logic
EP93xx platform.
Nikita Shubin has been working on this for a long time,
for details see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/
-----BEGIN PGP SIGNATURE-----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=Y3Cd
-----END PGP SIGNATURE-----
Merge tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
New SoC support for Broadcom bcm2712 (Raspberry Pi 5) and Renesas
R9A09G057 (RZ/V2H(P)) and Qualcomm Snapdragon 414 (MSM8929), all three
of these are variants of already supported chips, in particular the last
one is almost identical to MSM8939.
Lots of updates to Mediatek, ASpeed, Rockchips, Amlogic, Qualcomm,
STM32, NXP i.MX, Sophgo, TI K3, Renesas, Microchip at91, NVIDIA Tegra,
and T-HEAD.
The added Qualcomm platform support once again dominates the changes,
with seven phones and three laptops getting added in addition to
many new features on existing machines. The Snapdragon X1E support
specifically keeps improving.
The other new machines are:
- eight new machines using various 64-bit Rockchips SoCs, both
on the consumer/gaming side and developer boards
- three industrial boards with 64-bit i.MX, which is a very
low number for them.
- four more servers using a 32-bit Speed BMC
- three boards using STM32MP1 SoCs
- one new machine each using allwinner, amlogic, broadcom
and renesas chips.
-----BEGIN PGP SIGNATURE-----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=r07W
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"New SoC support for Broadcom bcm2712 (Raspberry Pi 5) and Renesas
R9A09G057 (RZ/V2H(P)) and Qualcomm Snapdragon 414 (MSM8929), all three
of these are variants of already supported chips, in particular the
last one is almost identical to MSM8939.
Lots of updates to Mediatek, ASpeed, Rockchips, Amlogic, Qualcomm,
STM32, NXP i.MX, Sophgo, TI K3, Renesas, Microchip at91, NVIDIA Tegra,
and T-HEAD.
The added Qualcomm platform support once again dominates the changes,
with seven phones and three laptops getting added in addition to many
new features on existing machines. The Snapdragon X1E support
specifically keeps improving.
The other new machines are:
- eight new machines using various 64-bit Rockchips SoCs, both on the
consumer/gaming side and developer boards
- three industrial boards with 64-bit i.MX, which is a very low
number for them.
- four more servers using a 32-bit Speed BMC
- three boards using STM32MP1 SoCs
- one new machine each using allwinner, amlogic, broadcom and renesas
chips"
* tag 'soc-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (672 commits)
arm64: dts: allwinner: h5: NanoPi NEO Plus2: Use regulators for pio
arm64: dts: mediatek: add audio support for mt8365-evk
arm64: dts: mediatek: add afe support for mt8365 SoC
arm64: dts: mediatek: mt8186-corsola: Disable DPI display interface
arm64: dts: mediatek: mt8186: Add svs node
arm64: dts: mediatek: mt8186: Add power domain for DPI
arm64: dts: mediatek: mt8195: Correct clock order for dp_intf*
arm64: dts: mt8183: add dpi node to mt8183
arm64: dts: allwinner: h5: NanoPi Neo Plus2: Fix regulators
arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc board
arm64: dts: rockchip: add CAN-FD controller nodes to rk3568
arm64: dts: nuvoton: ma35d1: Add uart pinctrl settings
arm64: dts: nuvoton: ma35d1: Add pinctrl and gpio nodes
arm64: dts: nuvoton: Add syscon to the system-management node
ARM: dts: Fix undocumented LM75 compatible nodes
arm64: dts: toshiba: Fix pl011 and pl022 clocks
ARM: dts: stm32: Use SAI to generate bit and frame clock on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Switch bitclock/frame-master to flag on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Sort properties in audio endpoints on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Add MECIO1 and MECT1S board variants
...
Add device tree file for Technologic Systems ts7250 board and
Liebherr bk3 board which have many in common, both are based on
ep9302 SoC variant.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
6.12, please pull the following:
- Andrea adds a minimal Device Tree for the Raspberry Pi 5 (2712)
- Stefan adjusts the bcm2837/bcm2712 bcm2836-l1-intc node name to
conform to the binding changes
-----BEGIN PGP SIGNATURE-----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=k60v
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=y4Wd
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.12/devicetree-arm64' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM64 SoCs Device Tree changes for
6.12, please pull the following:
- Andrea adds a minimal Device Tree for the Raspberry Pi 5 (2712)
- Stefan adjusts the bcm2837/bcm2712 bcm2836-l1-intc node name to
conform to the binding changes
* tag 'arm-soc/for-6.12/devicetree-arm64' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2837/bcm2712: adjust local intc node names
arm64: dts: broadcom: Add minimal support for Raspberry Pi 5
Link: https://lore.kernel.org/r/20240906180643.2275460-2-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
please pull the following:
- Krzysztof documents the AVS monitor binding present on 2711 (Raspberry
Pi 4)
- Rafal updates the Broadcom Northstar DTS files to use the recent NVMEM
binding
- Artur factors the nodes between the BCM21664 and BCM23550 SoCs since
they are nearly identical
- Stefan converts the bcm2835-system-timer and bcm2836-l1-intc to a YAML
binding syntax
-----BEGIN PGP SIGNATURE-----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=pLbU
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=S1tP
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.12/devicetree' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom SoCs Device Tree changes for 6.12,
please pull the following:
- Krzysztof documents the AVS monitor binding present on 2711 (Raspberry
Pi 4)
- Rafal updates the Broadcom Northstar DTS files to use the recent NVMEM
binding
- Artur factors the nodes between the BCM21664 and BCM23550 SoCs since
they are nearly identical
- Stefan converts the bcm2835-system-timer and bcm2836-l1-intc to a YAML
binding syntax
* tag 'arm-soc/for-6.12/devicetree' of https://github.com/Broadcom/stblinux:
dt-bindings: interrupt-controller: convert bcm2836-l1-intc to yaml
dt-bindings: timer: convert bcm2835-system-timer bindings to YAML
ARM: dts: bcm-mobile: Split out nodes used by both BCM21664 and BCM23550
ARM: dts: broadcom: bcm21664: Move chosen node into Garnet DTS
ARM: dts: broadcom: convert NVMEM content to layout syntax
dt-bindings: soc: bcm: document brcm,bcm2711-avs-monitor
Link: https://lore.kernel.org/r/20240906180643.2275460-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Realview: correct unit addresses (e.g. drop when not valid).
2. Nuvoton: correct node name to match bindings.
-----BEGIN PGP SIGNATURE-----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=MTME
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmbhVIsACgkQYKtH/8kJ
UicwVw//eUpeOz7k5u85WKLZLRhZZ9v1TmxIcwqrDvsCuOfElJxWo7QWjCoSu1H8
5PqQdivKesx/mPCgepQtxE7yZunihddqaoXul3fCY1anH/Jgnjgz343hjkssMZey
9pM4RC8VCx7JjKOEv65QNv+kSU7SZAUDVBapjJNpuhQCHjmrh5l5GhG6IRbdHrj5
FvpPD7oUdpE/2/rQGNiBShc2svASiQAMJdbbiUyaU+dpOF4wCjAKDIZnmk4nx/eb
N48M3o/3jMJxbv4O71oRXHZVA1JwHO8ajMZENYGPmdiD43WxmOuieYNU2tLNPGz6
mnl2bXz3PuC3PBzfAW/oY4Y4tjup25wVdxAbAgrGGbINLvSVak3t27kFc/KERvHX
BGHGbSUlPMTSfmEJ0yQdz1UALm4dwsJ7fA0qqHiB4RBlcpJj177gCxADGUbYFhtT
pjzpQJx1ICZEaUTrv70yUMQrJ2U0yuaYv+YfDKT/qncfOPNtcoJVtMFlvbxnjo4q
By9rh6YJwpiOPMqSAl20uObZnvIp7ocKNyxDmjojVQyIyb99LHiEv9hwqC5iUigS
eUd0IZVpK6+VdSXW7Gf7n0NciBkLO6C7EU62Y69ztusVvEHLsAc12ZcdRiFFHeCN
vhYCX3N+aQ8TRbncEUSdFbTzwiCt+/B7EcNhaHOmKQmP0os6nA8=
=2GTJ
-----END PGP SIGNATURE-----
Merge tag 'dt-cleanup-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM DTS for v6.12
1. Realview: correct unit addresses (e.g. drop when not valid).
2. Nuvoton: correct node name to match bindings.
* tag 'dt-cleanup-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: nuvoton: wpcm450: align LED and GPIO keys node name with bindings
arm: dts: realview: Add/drop missing/spurious unit-addreses
Link: https://lore.kernel.org/r/20240906140513.71307-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
"lm75" without any vendor is undocumented. It works with the Linux
kernel since the I2C subsystem will do matches of the compatible string
without a vendor prefix to the i2c_device_id and/or driver name.
Mostly replace "lm75" with "national,lm75" as that's the original part
vendor and the compatible which matches what "lm75" matched with. In a
couple of cases the node name or compatible gives a clue to the actual
part and vendor and a more specific compatible can be used. In these
cases, it does change the variant the kernel picks.
"nct75" is an OnSemi part which is compatible with TI TMP75C based on
a comparison of the OnSemi NCT75 datasheet and configuration the Linux
driver uses. Adding an OnSemi compatible would be an ABI change.
"nxp,lm75" is most likely an NXP part. Alexander Stein says the i.MX53
boards are a NXP LM75A as well. NXP makes a LM75A and LM75B. Both are
11-bit resolution and 100ms sample time. The "national,lm75a" is
9-bit, so "national,lm75b" is the closest match for both NXP variants.
While we're here, fix the node names to use the generic name
"temperature-sensor".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com> # am335x-nano.dts
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx53-mba53.dts, imx53-tqma53.dtsi
Link: https://lore.kernel.org/r/20240816164717.1585629-1-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A series from Fabio Estevam to fix dt-schema warnings on i.MX23,
i.MX28 and i.MX27 device trees
- A bunch of changes from Krzysztof Kozlowski that corrects TQ Systems
DTS patterns in MAINTAINERS file and fix various dt-schema warnings
- A couple changes from Liu Ying to improve HDMI support on i.MX53 QSB
board
- A series from Lukasz Majewski to update imx28-lwe device tree, fixing
partition definitions, reducing SPI frequency and cleaning up SAIF
- A series from Markus Niebel to improve TQ-Systems device trees, adding
iio-hwmon device, using better compatible for LM75 temp sensor, moving
I2C3 pinmux to a better place
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmbYVjoUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7oPgf9FKYcNHDzVh4X2NFyPvqYJiJrq6tT
8Po/UvgymzF6DkYMw7vDWthYCiH9PUpjk3nP7kv+xSDq4YOfkHshVYbOwqBACeSb
XtP5vS9RIVGU6G2ZhQ+lYM3d9Uc3hCRBCRBuCzUg8p7msp0a0gIYQbEOL3bBfBcr
KwhOM8nF+LJ4/4L3MUjQPEJRmoHsFMSZXGvVEpFiHNKwh8qByW9j/cPNey1aIMpe
GY+/J71qyvEy/lXS081gdec+VM8Y3GpoDPq8EIOri2xqms1fwihIiAcpUNngR8PN
REXzRbk0uT9MUwPE794qZxqCb+W1etVUHVhdfxN29CjWW7CYf3yhB6ePrg==
=fPHr
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=QOO+
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree changes for 6.12:
- A series from Fabio Estevam to fix dt-schema warnings on i.MX23,
i.MX28 and i.MX27 device trees
- A bunch of changes from Krzysztof Kozlowski that corrects TQ Systems
DTS patterns in MAINTAINERS file and fix various dt-schema warnings
- A couple changes from Liu Ying to improve HDMI support on i.MX53 QSB
board
- A series from Lukasz Majewski to update imx28-lwe device tree, fixing
partition definitions, reducing SPI frequency and cleaning up SAIF
- A series from Markus Niebel to improve TQ-Systems device trees, adding
iio-hwmon device, using better compatible for LM75 temp sensor, moving
I2C3 pinmux to a better place
* tag 'imx-dt-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (27 commits)
ARM: dts: imx28-lwe: Remove saif[01] definitions
ARM: dts: imx28-lwe: Reduce maximal SPI frequency
ARM: dts: imx28-lwe: Fix partitions definitions
ARM: dts: imx6qdl: align pin config nodes with bindings
ARM: dts: imx6sl: align pin config nodes with bindings
ARM: dts: imx6ul: align pin config nodes with bindings
ARM: dts: imx6ul-tx6ul: drop empty pinctrl placeholder
ARM: dts: imx28-tx28: Fix the fsl,saif-master usage
ARM: dts: imx6ull-seeed-npi: fix fsl,pins property in tscgrp pinctrl
ARM: dts: imx6ul-geam: fix fsl,pins property in tscgrp pinctrl
ARM: dts: imx23/8: Rename apbh and apbx nodes
ARM: dts: imx6qdl-mba6b: remove doubled entry for I2C1 pinmux
ARM: dts: imx6qdl-mba6: improve compatible for LM75 temp sensor
ARM: dts: imx6qdl-tqma6: improve compatible for LM75 temp sensor
ARM: dts: imx6qdl-tqma6: move i2c3 pinmux to imx6qdl-tqma6b
ARM: dts: imx7d-sdb: align pin config nodes with bindings
ARM: dts: imx7: align pin config nodes with bindings
ARM: dts: imx7d-zii-rmu2: fix Ethernet PHY pinctrl property
MAINTAINERS: correct TQ Systems DTS patterns
ARM: dts: imx6: update spdif sound card node properties
...
Link: https://lore.kernel.org/r/20240904143439.211552-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
By default the SGTL5000 derives bit and frame clock from MCLK, which
does not produce particularly accurate results. The SGTL5000 PLL does
improve the accuracy, but also increases power consumption. Using the
SoC SAI interface as bit and frame clock source results in the best
accuracy without the power consumption increase downside. Switch the
bit and frame clock direction from SAI to SGTL5000, reduce mclk-fs to
match.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Switch the bitclock-master and frame-master properties from phandle to
flag on STM32MP15xx DHCOM PDK2. There is no real reason to use phandle
in this system DT, since the phandle points to the endpoint node which
contains the property itself. Simplify the DT. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Introduce device tree support for the MECIO1 and MECT1S board variants.
MECIO1 is an I/O and motor control board used in blood sample analysis
machines. MECT1S is a 1000Base-T1 switch for internal machine networks
of blood sample analysis machines.
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Rename 'pins1' to 'pins' in the qspi_bk1_pins_a node to correct the
subnode name. The incorrect name caused the configuration to be
applied to the wrong subnode, resulting in QSPI not working properly.
Some additional changes was made:
- To avoid this kind of regression, all references to pin configuration
nodes are now referenced directly using the format &{label/subnode}.
- /delete-property/ bias-disable; was added everywhere where bias-pull-up
is used
- redundant properties like driver-push-pull are removed
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The RTL8211 PHY on DH STM32MP13xx DHCOR DHSBC carrier board supports HW
LED offload, the LEDs can be configured on link at 10/100/1000 line rate
and on RXTX activity. There are two PHYs on this board, each only has two
out of three LEDs connected to the PHY LED outputs. Describe this hardware
configuration in DT.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
This enables DDR50 mode for the eMMC on Octavo OSD32MP1-RED board.
Fixes: be78ab4f63 ("ARM: dts: stm32: add initial support for stm32mp157-odyssey board")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Describe ethernet MAC address nvmem cells in DH STM32MP13xx DHCOR DHSBC
board DT. The MAC address can be fused in BSEC OTP fuses and used to set
up MAC address for both ethernet MACs on this board.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The RTL8211F PHY clock output is not used on DH STM32MP13xx DHCOR DHSBC
board, disable it to improve EMI characteristics.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The RTL8211F PHY gets confused when the MDIO bus lines get switched
to ANALOG during suspend/resume cycle. Keep the MDIO and MDC lines
in AF during suspend/resume to avoid confusing the PHY. The PHY can
be brought out of the confused state by restarting auto-negotiation
too, but that seems like an odd workaround and shouldn't be in the
PHY driver.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
VPU for video decoding and the rk3128 sfc node can use the clock constant
now after the merge-window.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmbU3yIQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgcuBB/kBeNnJ266UlyAR4WHeG1Nx+vnf9iiMU8oi
x/effnB/zuO042YCGOCer5uOp2Z9/ZFkyOi/mQi5OnuotU/XHhVGCBCtt5ZBaczN
+e/Yhnq/b+mu9KgaKjZo3JNTtUcZ7xqhJPk7Tu8RiR7WucxtpAJ8IU7n64oxuxep
CjsULPLaU3DSRb8V1e0T0+CKLrfrM/ElNZjHPc2UDZUCd+nUp6dsilup65qQZAcQ
ADPbOsL5UcxJyDubIP67wLMS6V6UcnKDdZpR0z2+wxIBPZZ6VVHyGMj2MhnEZhKD
CxZb6Mg6pW1Ki/scZoAnWcK1ABsdPmUUwZ0csvfPD21Cbt7Ytw7b
=3S7y
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=d6TH
-----END PGP SIGNATURE-----
Merge tag 'v6.12-rockchip-dts32-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
spidev on the elgin-r1 got a real compatible, the rk3128 could enable its
VPU for video decoding and the rk3128 sfc node can use the clock constant
now after the merge-window.
* tag 'v6.12-rockchip-dts32-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Do not describe unexisting DAC device on rv1108-elgin-r1
ARM: dts: rockchip: Add vpu nodes for RK3128
ARM: dts: rockchip: use constant for HCLK_SFC on rk3128
Link: https://lore.kernel.org/r/3405397.RL5eaSpR8r@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It contains:
- SAMA7G5-EK DTS was updated with EEPROM nodes containing Ethernet
addresses (needed, at least, when U-Boot is removed from the booting
chain)
- 5V supplies were added to to MCP16502 PMIC nodes for better hardware
description
- cleanups around pinctrl nodes which removed many dtbs_check warnings;
along with it the pinctrl documentation was converted to json schema
- fixes for the RTC and RTT supply clocks on SAMA7G5 and SAM9X60
- other cleanups to fix dtbs_check warnings
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCZtMgmgAKCRCejrg/N2X7
/YHUAP9q4iY9zv4V2bY8jsxzQCNZpAs1E+vRBJWRhzlh6YpTFgD+NVM7eYP2qAe9
lNjE76KaXzuKWUA11mVfCrjhzi7ocgs=
=RQ5+
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=IOnx
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.12
It contains:
- SAMA7G5-EK DTS was updated with EEPROM nodes containing Ethernet
addresses (needed, at least, when U-Boot is removed from the booting
chain)
- 5V supplies were added to to MCP16502 PMIC nodes for better hardware
description
- cleanups around pinctrl nodes which removed many dtbs_check warnings;
along with it the pinctrl documentation was converted to json schema
- fixes for the RTC and RTT supply clocks on SAMA7G5 and SAM9X60
- other cleanups to fix dtbs_check warnings
* tag 'at91-dt-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sama7g5: Fix RTT clock
ARM: dts: microchip: sam9x60: Fix rtc/rtt clocks
dt-bindings: pinctrl: Convert Atmel PIO3 pinctrl to json-schema
ARM: dts: microchip: sam9x60: Remove additional compatible string from GPIO node
ARM: dts: microchip: Remove additional compatible string from PIO3 pinctrl nodes
ARM: dts: microchip: change to simple-mfd from simple-bus for PIO3 pinumux controller
ARM: dts: microchip: sama5d29_curiosity: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama5d27_wlsom1: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama5d2_icp: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama7g54_curiosity: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama7g5ek: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91: align LED node name with bindings
ARM: dts: microchip: sam9x60: Move i2c address/size to dtsi
ARM: dts: microchip: at91-sama7g5ek: add EEPROMs
Link: https://lore.kernel.org/r/20240901133110.2038675-2-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These patches add a bunch more features for the TF701T board and wire up
the front panel LEDs on TrimSlice.
-----BEGIN PGP SIGNATURE-----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=jQ+r
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmbW5dAACgkQYKtH/8kJ
UifTwRAAp0m9ouKoL3nvAWcb1p7BNJepHRtG8Tcq0RL2VzLCzgogBTCVX8d6R1am
ykXvxN3+hE9f5nCltqAfpESQoTCrjqIY3AncSvnqeMew8MjmgnrXbG737oc+qEXl
yjT1xHrjEhwnNkdhaYRyXe2C5RglCuJXnPdono6Xv6DXUKy1KkJZC8TaD2O4Famq
Ln0n3/kVFl2JKC0yhxx18qRr/cjRpGRFBZfP/pZlhhzSbX1B1DQ8NWfFQTpz5kJo
EgrFD3WMEwkz7sQ7DlWVg5B/pX5tylobx7f8mD6dvkU2KpEc0pSX9gkrL1pLiMEd
Ux2vTcTwhzpTlK/rVnH5OaLEQj5YTGg3AS5yvftjb2D/GjPWKBruuLEQQmhZuxES
aom7SvOfHn5JBJ+wwK2hpdQwC7Zz2dNNDAo0L8gWGydjjHter2HFA+il/KVKT4uz
B0+lldWLlhiSwXDCfAYSbLtjMRgQZUwiEqGzcM0rG46K5WeX6O0syZIaO25vqa5o
n+eCaPa7OccXNaW5b9fujutBgC7hDmBXNb32yfYG8CRqJ4bmVzxTvPEfQ58DocKF
iLbC8kZNPm0vZ/vLS8CUEjKOdjA/cXdDrqpF2hqoEoalNqaDPKi2O+CtZlOJcI7R
10QUkZ+uFQi3m1tDfbdolwWKXjebgZNAaZiz8yk4g6yI66cJIsY=
=scyt
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.12-arm-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v6.12-rc1
These patches add a bunch more features for the TF701T board and wire up
the front panel LEDs on TrimSlice.
* tag 'tegra-for-6.12-arm-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Wire up two front panel LEDs on TrimSlice
ARM: tegra: tf701t: Configure USB
ARM: tegra: tf701t: Use dedicated backlight regulator
ARM: tegra: tf701t: Re-group GPIO keys
ARM: tegra: tf701t: Bind WIFI SDIO and EMMC
ARM: tegra: tf701t: Complete sound bindings
ARM: tegra: tf701t: Adjust sensors nodes
ARM: tegra: tf701t: Add Bluetooth node
ARM: tegra: tf701t: Add HDMI bindings
ARM: tegra: tf701t: Correct and complete PMIC and PMC bindings
ARM: tegra: tf701t: Bind VDE device
ARM: tegra: tf701t: Use unimomentary pinmux setup
Link: https://lore.kernel.org/r/20240830141004.3195210-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The saif[01] nodes are specific to other group of the imx287
based devices, so need to be moved to different devices description file.
Leaving them here causes issues with next revision of XEA device.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Due to some operational problems (HW) the maximal speed of the SPI
frequency for flash memory has been reduced by half.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The SPI-NOR memory layout has evolved during time lifetime of the
device - for example special partitions to keep track of booted devices
for A/B booting scheme were added.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings for other NXP pin controllers expect pin configuration nodes in
pinctrl to match certain naming, so adjust these as well, even though
their bindings are not yet in dtschema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings for other NXP pin controllers expect pin configuration nodes in
pinctrl to match certain naming, so adjust these as well, even though
their bindings are not yet in dtschema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings expect pin configuration nodes in pinctrl to match certain
naming:
imx6ul-kontron-bl.dtb: pinctrl@20e0000: 'usbotg1' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Drop an empty pin configuration node placeholder, because bindings
require 'fsl,pins' property:
imx6ul-tx6ul-0010.dtb: pinctrl@20e0000: hoggrp: 'fsl,pins' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to fsl,saif.yaml, fsl,saif-master is a phandle to the master
SAIF.
Change it accordingly, to fix the following dt-schema warnings:
saif@80042000: fsl,saif-master: True is not of type 'array'
saif@80042000: Unevaluated properties are not allowed ('fsl,saif-master' was unexpected)
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-By: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The property is "fsl,pins", not "fsl,pin". Wrong property means the pin
configuration was not applied. Fixes dtbs_check warnings:
imx6ull-seeed-npi-dev-board-emmc.dtb: pinctrl@20e0000: uart1grp: 'fsl,pins' is a required property
imx6ull-seeed-npi-dev-board-emmc.dtb: pinctrl@20e0000: uart1grp: 'fsl,pin' does not match any of the regexes: 'pinctrl-[0-9]+'
Cc: stable@vger.kernel.org
Fixes: e3b5697195 ("ARM: dts: imx6ull: add seeed studio NPi dev board")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Parthiban Nallathambi <parthiban@linumiz.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The property is "fsl,pins", not "fsl,pin". Wrong property means the pin
configuration was not applied. Fixes dtbs_check warnings:
imx6ul-geam.dtb: pinctrl@20e0000: tscgrp: 'fsl,pins' is a required property
imx6ul-geam.dtb: pinctrl@20e0000: tscgrp: 'fsl,pin' does not match any of the regexes: 'pinctrl-[0-9]+'
Cc: stable@vger.kernel.org
Fixes: a58e4e608b ("ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to simple-bus.yaml, apbh and apbx are not valid bus names.
Rename them to apbh-bus and apbx-bus to fix the following dt-schema
warnings:
'apbh@80000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
'apbx@80040000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Since the muxing is described already in imx6qdl-tqma6 can be reused
by this variant. No functional change.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Use national,lm75a to specify exact variant used. This should cause
no functional changes.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Use national,lm75a to specify exact variant used. This should cause
no functional changes.
While at it change node name to 'temperature-sensor@48' to
describe the function of the IC.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Move the pinmux entries to the variant where they are actual
used. No functional changes.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
imx7d-sdb-sht11.dtb: pinctrl@30330000: 'imx7d-sdb' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the "imx7d-sdb" wrapping node and adjust the names to have "grp"
prefix. Diff looks big but this should have no functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
